diff options
author | lhauch <lhauch@6f19259b-4bc3-4df7-8a09-765794883524> | 2008-12-31 16:26:40 +0000 |
---|---|---|
committer | lhauch <lhauch@6f19259b-4bc3-4df7-8a09-765794883524> | 2008-12-31 16:26:40 +0000 |
commit | 808def96aa4589fba9c2d0ea55837754a3b7a4f7 (patch) | |
tree | 0ea221c59abb2474c694e7ab5bd61006be77e47e /EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/E100b.c | |
parent | 9216450d1143056a50a5f916984a2d7faf590488 (diff) | |
download | edk2-platforms-808def96aa4589fba9c2d0ea55837754a3b7a4f7.tar.xz |
Retiring the ANT/JAVA build and removing the older EDK II packages that required ANT/JAVA.
Last Ant/Java build was r7166
Developers requiring the Java/Ant packages should checkout the branch from:
https://edk2.tianocore.org/svn/edk2/branches/AntJava
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7168 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/E100b.c')
-rw-r--r-- | EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/E100b.c | 3756 |
1 files changed, 0 insertions, 3756 deletions
diff --git a/EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/E100b.c b/EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/E100b.c deleted file mode 100644 index d425778e06..0000000000 --- a/EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/E100b.c +++ /dev/null @@ -1,3756 +0,0 @@ -/*++
-
-Copyright (c) 2006, Intel Corporation
-All rights reserved. This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-Module Name:
-
-
- E100B.C
-
-Abstract:
-
-
-Revision History
-
---*/
-
-#include "Undi32.h"
-
-static UINT8 basic_config_cmd[22] = {
- 22, 0x08,
- 0, 0,
- 0, (UINT8)0x80,
- 0x32, 0x03,
- 1, 0,
- 0x2E, 0,
- 0x60, 0,
- (UINT8)0xf2, 0x48,
- 0, 0x40,
- (UINT8)0xf2, (UINT8)0x80, // 0x40=Force full-duplex
- 0x3f, 0x05,
-};
-
-//
-// How to wait for the command unit to accept a command.
-// Typically this takes 0 ticks.
-//
-#define wait_for_cmd_done(cmd_ioaddr) \
-{ \
- INT16 wait_count = 2000; \
- while ((InByte (AdapterInfo, cmd_ioaddr) != 0) && --wait_count >= 0) \
- DelayIt (AdapterInfo, 10); \
- if (wait_count == 0) \
- DelayIt (AdapterInfo, 50); \
-}
-
-UINT8
-InByte (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN UINT32 Port
- )
-/*++
-
-Routine Description:
- This function calls the MemIo callback to read a byte from the device's
- address space
- Since UNDI3.0 uses the TmpMemIo function (instead of the callback routine)
- which also takes the UniqueId parameter (as in UNDI3.1 spec) we don't have
- to make undi3.0 a special case
-
-Arguments:
- Port - Which port to read from.
-
-Returns:
- Results - The data read from the port.
-
---*/
-// TODO: AdapterInfo - add argument and description to function comment
-{
- UINT8 Results;
-
- (*AdapterInfo->Mem_Io) (
- AdapterInfo->Unique_ID,
- PXE_MEM_READ,
- 1,
- (UINT64)Port,
- (UINT64) (UINTN) &Results
- );
- return Results;
-}
-
-UINT16
-InWord (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN UINT32 Port
- )
-/*++
-
-Routine Description:
- This function calls the MemIo callback to read a word from the device's
- address space
- Since UNDI3.0 uses the TmpMemIo function (instead of the callback routine)
- which also takes the UniqueId parameter (as in UNDI3.1 spec) we don't have
- to make undi3.0 a special case
-
-Arguments:
- Port - Which port to read from.
-
-Returns:
- Results - The data read from the port.
-
---*/
-// TODO: AdapterInfo - add argument and description to function comment
-{
- UINT16 Results;
-
- (*AdapterInfo->Mem_Io) (
- AdapterInfo->Unique_ID,
- PXE_MEM_READ,
- 2,
- (UINT64)Port,
- (UINT64)(UINTN)&Results
- );
- return Results;
-}
-
-UINT32
-InLong (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN UINT32 Port
- )
-/*++
-
-Routine Description:
- This function calls the MemIo callback to read a dword from the device's
- address space
- Since UNDI3.0 uses the TmpMemIo function (instead of the callback routine)
- which also takes the UniqueId parameter (as in UNDI3.1 spec) we don't have
- to make undi3.0 a special case
-
-Arguments:
- Port - Which port to read from.
-
-Returns:
- Results - The data read from the port.
-
---*/
-// TODO: AdapterInfo - add argument and description to function comment
-{
- UINT32 Results;
-
- (*AdapterInfo->Mem_Io) (
- AdapterInfo->Unique_ID,
- PXE_MEM_READ,
- 4,
- (UINT64)Port,
- (UINT64)(UINTN)&Results
- );
- return Results;
-}
-
-VOID
-OutByte (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN UINT8 Data,
- IN UINT32 Port
- )
-/*++
-
-Routine Description:
- This function calls the MemIo callback to write a byte from the device's
- address space
- Since UNDI3.0 uses the TmpMemIo function (instead of the callback routine)
- which also takes the UniqueId parameter (as in UNDI3.1 spec) we don't have
- to make undi3.0 a special case
-
-Arguments:
- Data - Data to write to Port.
- Port - Which port to write to.
-
-Returns:
- none
-
---*/
-// TODO: AdapterInfo - add argument and description to function comment
-{
- UINT8 Val;
-
- Val = Data;
- (*AdapterInfo->Mem_Io) (
- AdapterInfo->Unique_ID,
- PXE_MEM_WRITE,
- 1,
- (UINT64)Port,
- (UINT64)(UINTN)(UINTN)&Val
- );
- return ;
-}
-
-VOID
-OutWord (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN UINT16 Data,
- IN UINT32 Port
- )
-/*++
-
-Routine Description:
- This function calls the MemIo callback to write a word from the device's
- address space
- Since UNDI3.0 uses the TmpMemIo function (instead of the callback routine)
- which also takes the UniqueId parameter (as in UNDI3.1 spec) we don't have
- to make undi3.0 a special case
-
-Arguments:
- Data - Data to write to Port.
- Port - Which port to write to.
-
-Returns:
- none
-
---*/
-// TODO: AdapterInfo - add argument and description to function comment
-{
- UINT16 Val;
-
- Val = Data;
- (*AdapterInfo->Mem_Io) (
- AdapterInfo->Unique_ID,
- PXE_MEM_WRITE,
- 2,
- (UINT64)Port,
- (UINT64)(UINTN)&Val
- );
- return ;
-}
-
-VOID
-OutLong (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN UINT32 Data,
- IN UINT32 Port
- )
-/*++
-
-Routine Description:
- This function calls the MemIo callback to write a dword from the device's
- address space
- Since UNDI3.0 uses the TmpMemIo function (instead of the callback routine)
- which also takes the UniqueId parameter (as in UNDI3.1 spec) we don't have
- to make undi3.0 a special case
-
-Arguments:
- Data - Data to write to Port.
- Port - Which port to write to.
-
-Returns:
- none
-
---*/
-// TODO: AdapterInfo - add argument and description to function comment
-{
- UINT32 Val;
-
- Val = Data;
- (*AdapterInfo->Mem_Io) (
- AdapterInfo->Unique_ID,
- PXE_MEM_WRITE,
- 4,
- (UINT64)Port,
- (UINT64)(UINTN)&Val
- );
- return ;
-}
-
-STATIC
-UINTN
-MapIt (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN UINT64 MemAddr,
- IN UINT32 Size,
- IN UINT32 Direction,
- OUT UINT64 MappedAddr
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
- MemAddr - TODO: add argument description
- Size - TODO: add argument description
- Direction - TODO: add argument description
- MappedAddr - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- UINT64 *PhyAddr;
-
- PhyAddr = (UINT64 *) (UINTN) MappedAddr;
- //
- // mapping is different for theold and new NII protocols
- //
- if (AdapterInfo->VersionFlag == 0x30) {
- if (AdapterInfo->Virt2Phys_30 == (VOID *) NULL) {
- *PhyAddr = (UINT64) AdapterInfo->MemoryPtr;
- } else {
- (*AdapterInfo->Virt2Phys_30) (MemAddr, (UINT64) (UINTN) PhyAddr);
- }
-
- if (*PhyAddr > FOUR_GIGABYTE) {
- return PXE_STATCODE_INVALID_PARAMETER;
- }
- } else {
- if (AdapterInfo->Map_Mem == (VOID *) NULL) {
- //
- // this UNDI cannot handle addresses beyond 4 GB without a map routine
- //
- if (MemAddr > FOUR_GIGABYTE) {
- return PXE_STATCODE_INVALID_PARAMETER;
- } else {
- *PhyAddr = MemAddr;
- }
- } else {
- (*AdapterInfo->Map_Mem) (
- AdapterInfo->Unique_ID,
- MemAddr,
- Size,
- Direction,
- MappedAddr
- );
- }
- }
-
- return PXE_STATCODE_SUCCESS;
-}
-
-STATIC
-VOID
-UnMapIt (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN UINT64 MemAddr,
- IN UINT32 Size,
- IN UINT32 Direction,
- IN UINT64 MappedAddr
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
- MemAddr - TODO: add argument description
- Size - TODO: add argument description
- Direction - TODO: add argument description
- MappedAddr - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- if (AdapterInfo->VersionFlag > 0x30) {
- //
- // no mapping service
- //
- if (AdapterInfo->UnMap_Mem != (VOID *) NULL) {
- (*AdapterInfo->UnMap_Mem) (
- AdapterInfo->Unique_ID,
- MemAddr,
- Size,
- Direction,
- MappedAddr
- );
-
- }
- }
-
- return ;
-}
-
-STATIC
-VOID
-DelayIt (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- UINT16 MicroSeconds
- )
-/*++
-
-Routine Description:
-
-Arguments:
- AdapterInfo - Pointer to the NIC data structure information
- which the UNDI driver is layering on..
-
-Returns:
-
---*/
-// TODO: MicroSeconds - add argument and description to function comment
-{
- if (AdapterInfo->VersionFlag == 0x30) {
- (*AdapterInfo->Delay_30) (MicroSeconds);
- } else {
- (*AdapterInfo->Delay) (AdapterInfo->Unique_ID, MicroSeconds);
- }
-}
-
-STATIC
-VOID
-BlockIt (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- UINT32 flag
- )
-/*++
-
-Routine Description:
-
-Arguments:
- AdapterInfo - Pointer to the NIC data structure information
- which the UNDI driver is layering on..
-
-Returns:
-
---*/
-// TODO: flag - add argument and description to function comment
-{
- if (AdapterInfo->VersionFlag == 0x30) {
- (*AdapterInfo->Block_30) (flag);
- } else {
- (*AdapterInfo->Block) (AdapterInfo->Unique_ID, flag);
- }
-}
-
-STATIC
-UINT8
-Load_Base_Regs (
- NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- //
- // we will use the linear (flat) memory model and fill our base registers
- // with 0's so that the entire physical address is our offset
- //
- //
- // we reset the statistics totals here because this is where we are loading stats addr
- //
- AdapterInfo->RxTotals = 0;
- AdapterInfo->TxTotals = 0;
-
- //
- // Load the statistics block address.
- //
- wait_for_cmd_done (AdapterInfo->ioaddr + SCBCmd);
- OutLong (AdapterInfo, (UINT32) AdapterInfo->stat_phy_addr, AdapterInfo->ioaddr + SCBPointer);
- OutByte (AdapterInfo, CU_STATSADDR, AdapterInfo->ioaddr + SCBCmd);
- AdapterInfo->statistics->done_marker = 0;
-
- wait_for_cmd_done (AdapterInfo->ioaddr + SCBCmd);
- OutLong (AdapterInfo, 0, AdapterInfo->ioaddr + SCBPointer);
- OutByte (AdapterInfo, RX_ADDR_LOAD, AdapterInfo->ioaddr + SCBCmd);
-
- wait_for_cmd_done (AdapterInfo->ioaddr + SCBCmd);
- OutLong (AdapterInfo, 0, AdapterInfo->ioaddr + SCBPointer);
- OutByte (AdapterInfo, CU_CMD_BASE, AdapterInfo->ioaddr + SCBCmd);
-
- return 0;
-}
-
-STATIC
-UINT8
-IssueCB (
- NIC_DATA_INSTANCE *AdapterInfo,
- TxCB *cmd_ptr
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
- cmd_ptr - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- UINT16 status;
-
- wait_for_cmd_done (AdapterInfo->ioaddr + SCBCmd);
-
- //
- // read the CU status, if it is idle, write the address of cb_ptr
- // in the scbpointer and issue a cu_start,
- // if it is suspended, remove the suspend bit in the previous command
- // block and issue a resume
- //
- // Ensure that the CU Active Status bit is not on from previous CBs.
- //
- status = InWord (AdapterInfo, AdapterInfo->ioaddr + SCBStatus);
-
- //
- // Skip acknowledging the interrupt if it is not already set
- //
-
- //
- // ack only the cna the integer
- //
- if ((status & SCB_STATUS_CNA) != 0) {
- OutWord (AdapterInfo, SCB_STATUS_CNA, AdapterInfo->ioaddr + SCBStatus);
-
- }
-
- if ((status & SCB_STATUS_CU_MASK) == SCB_STATUS_CU_IDLE) {
- //
- // give a cu_start
- //
- OutLong (AdapterInfo, cmd_ptr->PhysTCBAddress, AdapterInfo->ioaddr + SCBPointer);
- OutByte (AdapterInfo, CU_START, AdapterInfo->ioaddr + SCBCmd);
- } else {
- //
- // either active or suspended, give a resume
- //
-
- cmd_ptr->PrevTCBVirtualLinkPtr->cb_header.command &= ~(CmdSuspend | CmdIntr);
- OutByte (AdapterInfo, CU_RESUME, AdapterInfo->ioaddr + SCBCmd);
- }
-
- return 0;
-}
-
-STATIC
-UINT8
-Configure (
- NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- //
- // all command blocks are of TxCB format
- //
- TxCB *cmd_ptr;
- UINT8 *data_ptr;
- volatile INT16 Index;
- UINT8 my_filter;
-
- cmd_ptr = GetFreeCB (AdapterInfo);
- data_ptr = (UINT8 *) (&cmd_ptr->PhysTBDArrayAddres);
-
- //
- // start the config data right after the command header
- //
- for (Index = 0; Index < sizeof (basic_config_cmd); Index++) {
- data_ptr[Index] = basic_config_cmd[Index];
- }
-
- my_filter = (UINT8) ((AdapterInfo->Rx_Filter & PXE_OPFLAGS_RECEIVE_FILTER_PROMISCUOUS) ? 1 : 0);
- my_filter = (UINT8) ((my_filter | (AdapterInfo->Rx_Filter & PXE_OPFLAGS_RECEIVE_FILTER_BROADCAST) ? 0 : 2));
-
- data_ptr[15] = (UINT8) (data_ptr[15] | my_filter);
- data_ptr[19] = (UINT8) (AdapterInfo->Duplex ? 0xC0 : 0x80);
- data_ptr[21] = (UINT8) ((AdapterInfo->Rx_Filter & PXE_OPFLAGS_RECEIVE_FILTER_ALL_MULTICAST) ? 0x0D : 0x05);
-
- //
- // check if we have to use the AUI port instead
- //
- if ((AdapterInfo->PhyRecord[0] & 0x8000) != 0) {
- data_ptr[15] |= 0x80;
- data_ptr[8] = 0;
- }
-
- BlockIt (AdapterInfo, TRUE);
- cmd_ptr->cb_header.command = CmdSuspend | CmdConfigure;
-
- IssueCB (AdapterInfo, cmd_ptr);
- wait_for_cmd_done (AdapterInfo->ioaddr + SCBCmd);
-
- BlockIt (AdapterInfo, FALSE);
-
- CommandWaitForCompletion (cmd_ptr, AdapterInfo);
-
- //
- // restore the cb values for tx
- //
- cmd_ptr->PhysTBDArrayAddres = cmd_ptr->PhysArrayAddr;
- cmd_ptr->ByteCount = cmd_ptr->Threshold = cmd_ptr->TBDCount = 0;
- //
- // fields beyond the immediatedata are assumed to be safe
- // add the CB to the free list again
- //
- SetFreeCB (AdapterInfo, cmd_ptr);
- return 0;
-}
-
-UINT8
-E100bSetupIAAddr (
- NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- //
- // all command blocks are of TxCB format
- //
- TxCB *cmd_ptr;
- UINT16 *data_ptr;
- UINT16 *eaddrs;
-
- eaddrs = (UINT16 *) AdapterInfo->CurrentNodeAddress;
-
- cmd_ptr = GetFreeCB (AdapterInfo);
- data_ptr = (UINT16 *) (&cmd_ptr->PhysTBDArrayAddres);
-
- //
- // AVOID a bug (?!) here by marking the command already completed.
- //
- cmd_ptr->cb_header.command = (CmdSuspend | CmdIASetup);
- cmd_ptr->cb_header.status = 0;
- data_ptr[0] = eaddrs[0];
- data_ptr[1] = eaddrs[1];
- data_ptr[2] = eaddrs[2];
-
- BlockIt (AdapterInfo, TRUE);
- IssueCB (AdapterInfo, cmd_ptr);
- wait_for_cmd_done (AdapterInfo->ioaddr + SCBCmd);
- BlockIt (AdapterInfo, FALSE);
-
- CommandWaitForCompletion (cmd_ptr, AdapterInfo);
-
- //
- // restore the cb values for tx
- //
- cmd_ptr->PhysTBDArrayAddres = cmd_ptr->PhysArrayAddr;
- cmd_ptr->ByteCount = cmd_ptr->Threshold = cmd_ptr->TBDCount = 0;
- //
- // fields beyond the immediatedata are assumed to be safe
- // add the CB to the free list again
- //
- SetFreeCB (AdapterInfo, cmd_ptr);
- return 0;
-}
-
-STATIC
-VOID
-StopRU (
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- Instructs the NIC to stop receiving packets.
-
-Arguments:
- AdapterInfo - Pointer to the NIC data structure information
- which the UNDI driver is layering on..
-Returns:
-
---*/
-{
- if (AdapterInfo->Receive_Started) {
-
- //
- // Todo: verify that we must wait for previous command completion.
- //
- wait_for_cmd_done (AdapterInfo->ioaddr + SCBCmd);
-
- //
- // Disable interrupts, and stop the chip's Rx process.
- //
- OutWord (AdapterInfo, INT_MASK, AdapterInfo->ioaddr + SCBCmd);
- OutWord (AdapterInfo, INT_MASK | RX_ABORT, AdapterInfo->ioaddr + SCBCmd);
-
- AdapterInfo->Receive_Started = FALSE;
- }
-
- return ;
-}
-
-STATIC
-INT8
-StartRU (
- NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- Instructs the NIC to start receiving packets.
-
-Arguments:
- AdapterInfo - Pointer to the NIC data structure information
- which the UNDI driver is layering on..
-Returns:
- 0 - Successful
- -1 - Already Started
---*/
-{
-
- if (AdapterInfo->Receive_Started) {
- //
- // already started
- //
- return -1;
- }
-
- AdapterInfo->cur_rx_ind = 0;
- AdapterInfo->Int_Status = 0;
-
- wait_for_cmd_done (AdapterInfo->ioaddr + SCBCmd);
-
- OutLong (AdapterInfo, (UINT32) AdapterInfo->rx_phy_addr, AdapterInfo->ioaddr + SCBPointer);
- OutByte (AdapterInfo, RX_START, AdapterInfo->ioaddr + SCBCmd);
-
- wait_for_cmd_done (AdapterInfo->ioaddr + SCBCmd);
-
- AdapterInfo->Receive_Started = TRUE;
- return 0;
-}
-
-UINTN
-E100bInit (
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- Configures the chip. This routine expects the NIC_DATA_INSTANCE structure to be filled in.
-
-Arguments:
- AdapterInfo - Pointer to the NIC data structure information
- which the UNDI driver is layering on..
-
-Returns:
- 0 - Successful
- PXE_STATCODE_NOT_ENOUGH_MEMORY - Insufficient length of locked memory
- other - Failure initializing chip
---*/
-{
- PCI_CONFIG_HEADER *CfgHdr;
- UINTN stat;
- UINTN rx_size;
- UINTN tx_size;
-
- if (AdapterInfo->MemoryLength < MEMORY_NEEDED) {
- return PXE_STATCODE_NOT_ENOUGH_MEMORY;
- }
-
- stat = MapIt (
- AdapterInfo,
- AdapterInfo->MemoryPtr,
- AdapterInfo->MemoryLength,
- TO_AND_FROM_DEVICE,
- (UINT64)(UINTN) &AdapterInfo->Mapped_MemoryPtr
- );
-
- if (stat != 0) {
- return stat;
- }
-
- CfgHdr = (PCI_CONFIG_HEADER *) &(AdapterInfo->Config[0]);
-
- //
- // fill in the ioaddr, int... from the config space
- //
- AdapterInfo->int_num = CfgHdr->int_line;
-
- //
- // we don't need to validate integer number, what if they don't want to assign one?
- // if (AdapterInfo->int_num == 0 || AdapterInfo->int_num == 0xff)
- // return PXE_STATCODE_DEVICE_FAILURE;
- //
- AdapterInfo->ioaddr = 0;
- AdapterInfo->VendorID = CfgHdr->VendorID;
- AdapterInfo->DeviceID = CfgHdr->DeviceID;
- AdapterInfo->RevID = CfgHdr->RevID;
- AdapterInfo->SubVendorID = CfgHdr->SubVendorID;
- AdapterInfo->SubSystemID = CfgHdr->SubSystemID;
- AdapterInfo->flash_addr = 0;
-
- //
- // Read the station address EEPROM before doing the reset.
- // Perhaps this should even be done before accepting the device,
- // then we wouldn't have a device name with which to report the error.
- //
- if (E100bReadEepromAndStationAddress (AdapterInfo) != 0) {
- return PXE_STATCODE_DEVICE_FAILURE;
-
- }
- //
- // ## calculate the buffer #s depending on memory given
- // ## calculate the rx and tx ring pointers
- //
-
- AdapterInfo->TxBufCnt = TX_BUFFER_COUNT;
- AdapterInfo->RxBufCnt = RX_BUFFER_COUNT;
- rx_size = (AdapterInfo->RxBufCnt * sizeof (RxFD));
- tx_size = (AdapterInfo->TxBufCnt * sizeof (TxCB));
- AdapterInfo->rx_ring = (RxFD *) (UINTN) (AdapterInfo->MemoryPtr);
- AdapterInfo->tx_ring = (TxCB *) (UINTN) (AdapterInfo->MemoryPtr + rx_size);
- AdapterInfo->statistics = (struct speedo_stats *) (UINTN) (AdapterInfo->MemoryPtr + rx_size + tx_size);
-
- AdapterInfo->rx_phy_addr = AdapterInfo->Mapped_MemoryPtr;
- AdapterInfo->tx_phy_addr = AdapterInfo->Mapped_MemoryPtr + rx_size;
- AdapterInfo->stat_phy_addr = AdapterInfo->tx_phy_addr + tx_size;
-
- //
- // auto detect.
- //
- AdapterInfo->PhyAddress = 0xFF;
- AdapterInfo->Rx_Filter = PXE_OPFLAGS_RECEIVE_FILTER_BROADCAST;
- AdapterInfo->Receive_Started = FALSE;
- AdapterInfo->mcast_list.list_len = 0;
- return InitializeChip (AdapterInfo);
-}
-
-UINT8
-E100bSetInterruptState (
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- Sets the interrupt state for the NIC.
-
-Arguments:
- AdapterInfo - Pointer to the NIC data structure information
- which the UNDI driver is layering on..
-Returns:
- 0 - Successful
---*/
-{
- //
- // don't set receive interrupt if receiver is disabled...
- //
- UINT16 cmd_word;
-
- if ((AdapterInfo->int_mask & PXE_OPFLAGS_INTERRUPT_RECEIVE) != 0) {
- cmd_word = InWord (AdapterInfo, AdapterInfo->ioaddr + SCBCmd);
- cmd_word &= ~INT_MASK;
- OutWord (AdapterInfo, cmd_word, AdapterInfo->ioaddr + SCBCmd);
- } else {
- //
- // disable ints, should not be given for SW Int.
- //
- OutWord (AdapterInfo, INT_MASK, AdapterInfo->ioaddr + SCBCmd);
- }
-
- if ((AdapterInfo->int_mask & PXE_OPFLAGS_INTERRUPT_SOFTWARE) != 0) {
- //
- // reset the bit in our mask, it is only one time!!
- //
- AdapterInfo->int_mask &= ~(PXE_OPFLAGS_INTERRUPT_SOFTWARE);
- cmd_word = InWord (AdapterInfo, AdapterInfo->ioaddr + SCBCmd);
- cmd_word |= DRVR_INT;
- OutWord (AdapterInfo, cmd_word, AdapterInfo->ioaddr + SCBCmd);
- }
-
- return 0;
-}
-//
-// we are not going to disable broadcast for the WOL's sake!
-//
-UINTN
-E100bSetfilter (
- NIC_DATA_INSTANCE *AdapterInfo,
- UINT16 new_filter,
- UINT64 cpb,
- UINT32 cpbsize
- )
-/*++
-
-Routine Description:
- Instructs the NIC to start receiving packets.
-
-Arguments:
- AdapterInfo - Pointer to the NIC data structure information
- which the UNDI driver is layering on..
- new_filter -
- cpb -
- cpbsize -
-
-Returns:
- 0 - Successful
- -1 - Already Started
---*/
-{
- PXE_CPB_RECEIVE_FILTERS *mc_list = (PXE_CPB_RECEIVE_FILTERS *) (UINTN)cpb;
- UINT16 cfg_flt;
- UINT16 old_filter;
- UINT16 Index;
- UINT16 Index2;
- UINT16 mc_count;
- TxCB *cmd_ptr;
- struct MC_CB_STRUCT *data_ptr;
- UINT16 mc_byte_cnt;
-
- old_filter = AdapterInfo->Rx_Filter;
-
- //
- // only these bits need a change in the configuration
- // actually change in bcast requires configure but we ignore that change
- //
- cfg_flt = PXE_OPFLAGS_RECEIVE_FILTER_PROMISCUOUS |
- PXE_OPFLAGS_RECEIVE_FILTER_ALL_MULTICAST;
-
- if ((old_filter & cfg_flt) != (new_filter & cfg_flt)) {
- XmitWaitForCompletion (AdapterInfo);
-
- if (AdapterInfo->Receive_Started) {
- StopRU (AdapterInfo);
- }
-
- AdapterInfo->Rx_Filter = (UINT8) (new_filter | PXE_OPFLAGS_RECEIVE_FILTER_BROADCAST);
- Configure (AdapterInfo);
- }
-
- //
- // check if mcast setting changed
- //
- if ( ((new_filter & PXE_OPFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST) !=
- (old_filter & PXE_OPFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST) ) ||
- (mc_list != NULL) ) {
-
-
- if (mc_list != NULL) {
- mc_count = AdapterInfo->mcast_list.list_len = (UINT16) (cpbsize / PXE_MAC_LENGTH);
-
- for (Index = 0; (Index < mc_count && Index < MAX_MCAST_ADDRESS_CNT); Index++) {
- for (Index2 = 0; Index2 < PXE_MAC_LENGTH; Index2++) {
- AdapterInfo->mcast_list.mc_list[Index][Index2] = mc_list->MCastList[Index][Index2];
- }
- }
- }
-
- //
- // are we setting the list or resetting??
- //
- if ((new_filter & PXE_OPFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST) != 0) {
- //
- // we are setting a new list!
- //
- mc_count = AdapterInfo->mcast_list.list_len;
- //
- // count should be the actual # of bytes in the list
- // so multiply this with 6
- //
- mc_byte_cnt = (UINT16) ((mc_count << 2) + (mc_count << 1));
- AdapterInfo->Rx_Filter |= PXE_OPFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST;
- } else {
- //
- // disabling the list in the NIC.
- //
- mc_byte_cnt = mc_count = 0;
- AdapterInfo->Rx_Filter &= (~PXE_OPFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST);
- }
-
- //
- // before issuing any new command!
- //
- XmitWaitForCompletion (AdapterInfo);
-
- if (AdapterInfo->Receive_Started) {
- StopRU (AdapterInfo);
-
- }
-
- cmd_ptr = GetFreeCB (AdapterInfo);
- if (cmd_ptr == NULL) {
- return PXE_STATCODE_QUEUE_FULL;
- }
- //
- // fill the command structure and issue
- //
- data_ptr = (struct MC_CB_STRUCT *) (&cmd_ptr->PhysTBDArrayAddres);
- //
- // first 2 bytes are the count;
- //
- data_ptr->count = mc_byte_cnt;
- for (Index = 0; Index < mc_count; Index++) {
- for (Index2 = 0; Index2 < PXE_HWADDR_LEN_ETHER; Index2++) {
- data_ptr->m_list[Index][Index2] = AdapterInfo->mcast_list.mc_list[Index][Index2];
- }
- }
-
- cmd_ptr->cb_header.command = CmdSuspend | CmdMulticastList;
- cmd_ptr->cb_header.status = 0;
-
- BlockIt (AdapterInfo, TRUE);
- IssueCB (AdapterInfo, cmd_ptr);
- wait_for_cmd_done (AdapterInfo->ioaddr + SCBCmd);
-
- BlockIt (AdapterInfo, FALSE);
-
- CommandWaitForCompletion (cmd_ptr, AdapterInfo);
-
- cmd_ptr->PhysTBDArrayAddres = cmd_ptr->PhysArrayAddr;
- cmd_ptr->ByteCount = cmd_ptr->Threshold = cmd_ptr->TBDCount = 0;
- //
- // fields beyond the immediatedata are assumed to be safe
- // add the CB to the free list again
- //
- SetFreeCB (AdapterInfo, cmd_ptr);
- }
-
- if (new_filter != 0) {
- //
- // enable unicast and start the RU
- //
- AdapterInfo->Rx_Filter = (UINT8) (AdapterInfo->Rx_Filter | (new_filter | PXE_OPFLAGS_RECEIVE_FILTER_UNICAST));
- StartRU (AdapterInfo);
- } else {
- //
- // may be disabling everything!
- //
- if (AdapterInfo->Receive_Started) {
- StopRU (AdapterInfo);
- }
-
- AdapterInfo->Rx_Filter |= (~PXE_OPFLAGS_RECEIVE_FILTER_UNICAST);
- }
-
- return 0;
-}
-
-UINTN
-E100bTransmit (
- NIC_DATA_INSTANCE *AdapterInfo,
- UINT64 cpb,
- UINT16 opflags
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
- cpb - TODO: add argument description
- opflags - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- PXE_CPB_TRANSMIT_FRAGMENTS *tx_ptr_f;
- PXE_CPB_TRANSMIT *tx_ptr_1;
- TxCB *tcb_ptr;
- UINT64 Tmp_ptr;
- UINTN stat;
- INT32 Index;
- UINT16 wait_sec;
-
- tx_ptr_1 = (PXE_CPB_TRANSMIT *) (UINTN) cpb;
- tx_ptr_f = (PXE_CPB_TRANSMIT_FRAGMENTS *) (UINTN) cpb;
-
- //
- // stop reentrancy here
- //
- if (AdapterInfo->in_transmit) {
- return PXE_STATCODE_BUSY;
-
- }
-
- AdapterInfo->in_transmit = TRUE;
-
- //
- // Prevent interrupts from changing the Tx ring from underneath us.
- //
- // Calculate the Tx descriptor entry.
- //
- if ((tcb_ptr = GetFreeCB (AdapterInfo)) == NULL) {
- AdapterInfo->in_transmit = FALSE;
- return PXE_STATCODE_QUEUE_FULL;
- }
-
- AdapterInfo->TxTotals++;
-
- tcb_ptr->cb_header.command = (CmdSuspend | CmdTx | CmdTxFlex);
- tcb_ptr->cb_header.status = 0;
-
- //
- // no immediate data, set EOF in the ByteCount
- //
- tcb_ptr->ByteCount = 0x8000;
-
- //
- // The data region is always in one buffer descriptor, Tx FIFO
- // threshold of 256.
- // 82557 multiplies the threashold value by 8, so give 256/8
- //
- tcb_ptr->Threshold = 32;
- if ((opflags & PXE_OPFLAGS_TRANSMIT_FRAGMENTED) != 0) {
-
- if (tx_ptr_f->FragCnt > MAX_XMIT_FRAGMENTS) {
- SetFreeCB (AdapterInfo, tcb_ptr);
- AdapterInfo->in_transmit = FALSE;
- return PXE_STATCODE_INVALID_PARAMETER;
- }
-
- tcb_ptr->TBDCount = (UINT8) tx_ptr_f->FragCnt;
-
- for (Index = 0; Index < tx_ptr_f->FragCnt; Index++) {
- stat = MapIt (
- AdapterInfo,
- tx_ptr_f->FragDesc[Index].FragAddr,
- tx_ptr_f->FragDesc[Index].FragLen,
- TO_DEVICE,
- (UINT64)(UINTN) &Tmp_ptr
- );
- if (stat != 0) {
- SetFreeCB (AdapterInfo, tcb_ptr);
- AdapterInfo->in_transmit = FALSE;
- return PXE_STATCODE_INVALID_PARAMETER;
- }
-
- tcb_ptr->TBDArray[Index].phys_buf_addr = (UINT32) Tmp_ptr;
- tcb_ptr->TBDArray[Index].buf_len = tx_ptr_f->FragDesc[Index].FragLen;
- }
-
- tcb_ptr->free_data_ptr = tx_ptr_f->FragDesc[0].FragAddr;
-
- } else {
- //
- // non fragmented case
- //
- tcb_ptr->TBDCount = 1;
- stat = MapIt (
- AdapterInfo,
- tx_ptr_1->FrameAddr,
- tx_ptr_1->DataLen + tx_ptr_1->MediaheaderLen,
- TO_DEVICE,
- (UINT64)(UINTN) &Tmp_ptr
- );
- if (stat != 0) {
- SetFreeCB (AdapterInfo, tcb_ptr);
- AdapterInfo->in_transmit = FALSE;
- return PXE_STATCODE_INVALID_PARAMETER;
- }
-
- tcb_ptr->TBDArray[0].phys_buf_addr = (UINT32) (Tmp_ptr);
- tcb_ptr->TBDArray[0].buf_len = tx_ptr_1->DataLen + tx_ptr_1->MediaheaderLen;
- tcb_ptr->free_data_ptr = tx_ptr_1->FrameAddr;
- }
-
- //
- // must wait for previous command completion only if it was a non-transmit
- //
- BlockIt (AdapterInfo, TRUE);
- IssueCB (AdapterInfo, tcb_ptr);
- BlockIt (AdapterInfo, FALSE);
-
- //
- // see if we need to wait for completion here
- //
- if ((opflags & PXE_OPFLAGS_TRANSMIT_BLOCK) != 0) {
- //
- // don't wait for more than 1 second!!!
- //
- wait_sec = 1000;
- while (tcb_ptr->cb_header.status == 0) {
- DelayIt (AdapterInfo, 10);
- wait_sec--;
- if (wait_sec == 0) {
- break;
- }
- }
- //
- // we need to un-map any mapped buffers here
- //
- if ((opflags & PXE_OPFLAGS_TRANSMIT_FRAGMENTED) != 0) {
-
- for (Index = 0; Index < tx_ptr_f->FragCnt; Index++) {
- Tmp_ptr = tcb_ptr->TBDArray[Index].phys_buf_addr;
- UnMapIt (
- AdapterInfo,
- tx_ptr_f->FragDesc[Index].FragAddr,
- tx_ptr_f->FragDesc[Index].FragLen,
- TO_DEVICE,
- (UINT64) Tmp_ptr
- );
- }
- } else {
- Tmp_ptr = tcb_ptr->TBDArray[0].phys_buf_addr;
- UnMapIt (
- AdapterInfo,
- tx_ptr_1->FrameAddr,
- tx_ptr_1->DataLen + tx_ptr_1->MediaheaderLen,
- TO_DEVICE,
- (UINT64) Tmp_ptr
- );
- }
-
- if (tcb_ptr->cb_header.status == 0) {
- SetFreeCB (AdapterInfo, tcb_ptr);
- AdapterInfo->in_transmit = FALSE;
- return PXE_STATCODE_DEVICE_FAILURE;
- }
-
- SetFreeCB (AdapterInfo, tcb_ptr);
- }
- //
- // CB will be set free later in get_status (or when we run out of xmit buffers
- //
- AdapterInfo->in_transmit = FALSE;
-
- return 0;
-}
-
-UINTN
-E100bReceive (
- NIC_DATA_INSTANCE *AdapterInfo,
- UINT64 cpb,
- UINT64 db
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
- cpb - TODO: add argument description
- db - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- PXE_CPB_RECEIVE *rx_cpbptr;
- PXE_DB_RECEIVE *rx_dbptr;
- RxFD *rx_ptr;
- INT32 status;
- INT32 Index;
- UINT16 pkt_len;
- UINT16 ret_code;
- PXE_FRAME_TYPE pkt_type;
- UINT16 Tmp_len;
- EtherHeader *hdr_ptr;
- ret_code = PXE_STATCODE_NO_DATA;
- pkt_type = PXE_FRAME_TYPE_NONE;
- status = InWord (AdapterInfo, AdapterInfo->ioaddr + SCBStatus);
- AdapterInfo->Int_Status = (UINT16) (AdapterInfo->Int_Status | status);
- //
- // acknoledge the interrupts
- //
- OutWord (AdapterInfo, (UINT16) (status & 0xfc00), (UINT32) (AdapterInfo->ioaddr + SCBStatus));
-
- //
- // include the prev ints as well
- //
- status = AdapterInfo->Int_Status;
- rx_cpbptr = (PXE_CPB_RECEIVE *) (UINTN) cpb;
- rx_dbptr = (PXE_DB_RECEIVE *) (UINTN) db;
-
- rx_ptr = &AdapterInfo->rx_ring[AdapterInfo->cur_rx_ind];
-
- //
- // be in a loop just in case (we may drop a pkt)
- //
- while ((status = rx_ptr->cb_header.status) & RX_COMPLETE) {
-
- AdapterInfo->RxTotals++;
- //
- // If we own the next entry, it's a new packet. Send it up.
- //
- if (rx_ptr->forwarded) {
- goto FreeRFD;
-
- }
-
- //
- // discard bad frames
- //
-
- //
- // crc, align, dma overrun, too short, receive error (v22 no coll)
- //
- if ((status & 0x0D90) != 0) {
- goto FreeRFD;
-
- }
-
- //
- // make sure the status is OK
- //
- if ((status & 0x02000) == 0) {
- goto FreeRFD;
- }
-
- pkt_len = (UINT16) (rx_ptr->ActualCount & 0x3fff);
-
- if (pkt_len != 0) {
-
- Tmp_len = pkt_len;
- if (pkt_len > rx_cpbptr->BufferLen) {
- Tmp_len = (UINT16) rx_cpbptr->BufferLen;
- }
-
- CopyMem ((INT8 *) (UINTN) rx_cpbptr->BufferAddr, (INT8 *) &rx_ptr->RFDBuffer, Tmp_len);
-
- hdr_ptr = (EtherHeader *) &rx_ptr->RFDBuffer;
- //
- // fill the CDB and break the loop
- //
-
- //
- // includes header
- //
- rx_dbptr->FrameLen = pkt_len;
- rx_dbptr->MediaHeaderLen = PXE_MAC_HEADER_LEN_ETHER;
-
- for (Index = 0; Index < PXE_HWADDR_LEN_ETHER; Index++) {
- if (hdr_ptr->dest_addr[Index] != AdapterInfo->CurrentNodeAddress[Index]) {
- break;
- }
- }
-
- if (Index >= PXE_HWADDR_LEN_ETHER) {
- pkt_type = PXE_FRAME_TYPE_UNICAST;
- } else {
- for (Index = 0; Index < PXE_HWADDR_LEN_ETHER; Index++) {
- if (hdr_ptr->dest_addr[Index] != AdapterInfo->BroadcastNodeAddress[Index]) {
- break;
- }
- }
-
- if (Index >= PXE_HWADDR_LEN_ETHER) {
- pkt_type = PXE_FRAME_TYPE_BROADCAST;
- } else {
- if ((hdr_ptr->dest_addr[0] & 1) == 1) {
- //
- // mcast
- //
-
- pkt_type = PXE_FRAME_TYPE_MULTICAST;
- } else {
- pkt_type = PXE_FRAME_TYPE_PROMISCUOUS;
- }
- }
- }
-
- rx_dbptr->Type = pkt_type;
- rx_dbptr->Protocol = hdr_ptr->type;
-
- for (Index = 0; Index < PXE_HWADDR_LEN_ETHER; Index++) {
- rx_dbptr->SrcAddr[Index] = hdr_ptr->src_addr[Index];
- rx_dbptr->DestAddr[Index] = hdr_ptr->dest_addr[Index];
- }
-
- rx_ptr->forwarded = TRUE;
- //
- // success
- //
- ret_code = 0;
- Recycle_RFD (AdapterInfo, AdapterInfo->cur_rx_ind);
- AdapterInfo->cur_rx_ind++;
- if (AdapterInfo->cur_rx_ind == AdapterInfo->RxBufCnt) {
- AdapterInfo->cur_rx_ind = 0;
- }
- break;
- }
-
-FreeRFD:
- Recycle_RFD (AdapterInfo, AdapterInfo->cur_rx_ind);
- AdapterInfo->cur_rx_ind++;
- if (AdapterInfo->cur_rx_ind == AdapterInfo->RxBufCnt) {
- AdapterInfo->cur_rx_ind = 0;
- }
-
- rx_ptr = &AdapterInfo->rx_ring[AdapterInfo->cur_rx_ind];
- }
-
- if (pkt_type == PXE_FRAME_TYPE_NONE) {
- AdapterInfo->Int_Status &= (~SCB_STATUS_FR);
- }
-
- status = InWord (AdapterInfo, AdapterInfo->ioaddr + SCBStatus);
- if ((status & SCB_RUS_NO_RESOURCES) != 0) {
- //
- // start the receive unit here!
- // leave all the filled frames,
- //
- SetupReceiveQueues (AdapterInfo);
- OutLong (AdapterInfo, (UINT32) AdapterInfo->rx_phy_addr, AdapterInfo->ioaddr + SCBPointer);
- OutWord (AdapterInfo, RX_START, AdapterInfo->ioaddr + SCBCmd);
- AdapterInfo->cur_rx_ind = 0;
- }
-
- return ret_code;
-}
-
-INT16
-E100bReadEepromAndStationAddress (
- NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- INT32 Index;
- INT32 Index2;
- UINT16 sum;
- UINT16 eeprom_len;
- UINT8 addr_len;
- UINT16 *eedata;
-
- eedata = (UINT16 *) (&AdapterInfo->NVData[0]);
-
- sum = 0;
- addr_len = E100bGetEepromAddrLen (AdapterInfo);
-
- //
- // in words
- //
- AdapterInfo->NVData_Len = eeprom_len = (UINT16) (1 << addr_len);
- for (Index2 = 0, Index = 0; Index < eeprom_len; Index++) {
- UINT16 value;
- value = E100bReadEeprom (AdapterInfo, Index, addr_len);
- eedata[Index] = value;
- sum = (UINT16) (sum + value);
- if (Index < 3) {
- AdapterInfo->PermNodeAddress[Index2++] = (UINT8) value;
- AdapterInfo->PermNodeAddress[Index2++] = (UINT8) (value >> 8);
- }
- }
-
- if (sum != 0xBABA) {
- return -1;
- }
-
- for (Index = 0; Index < PXE_HWADDR_LEN_ETHER; Index++) {
- AdapterInfo->CurrentNodeAddress[Index] = AdapterInfo->PermNodeAddress[Index];
- }
-
- for (Index = 0; Index < PXE_HWADDR_LEN_ETHER; Index++) {
- AdapterInfo->BroadcastNodeAddress[Index] = 0xff;
- }
-
- for (Index = PXE_HWADDR_LEN_ETHER; Index < PXE_MAC_LENGTH; Index++) {
- AdapterInfo->CurrentNodeAddress[Index] = 0;
- AdapterInfo->PermNodeAddress[Index] = 0;
- AdapterInfo->BroadcastNodeAddress[Index] = 0;
- }
-
- return 0;
-}
-
-//
-// CBList is a circular linked list
-// 1) When all are free, Tail->next == Head and FreeCount == # allocated
-// 2) When none are free, Tail == Head and FreeCount == 0
-// 3) when one is free, Tail == Head and Freecount == 1
-// 4) First non-Free frame is always at Tail->next
-//
-UINT8
-SetupCBlink (
- NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- TxCB *head_ptr;
- TxCB *tail_ptr;
- TxCB *cur_ptr;
- INT32 Index;
- UINTN array_off;
-
- cur_ptr = &(AdapterInfo->tx_ring[0]);
- array_off = (UINTN) (&cur_ptr->TBDArray) - (UINTN) cur_ptr;
- for (Index = 0; Index < AdapterInfo->TxBufCnt; Index++) {
- cur_ptr[Index].cb_header.status = 0;
- cur_ptr[Index].cb_header.command = 0;
-
- cur_ptr[Index].PhysTCBAddress =
- (UINT32) AdapterInfo->tx_phy_addr + (Index * sizeof (TxCB));
-
- cur_ptr[Index].PhysArrayAddr = (UINT32)(cur_ptr[Index].PhysTCBAddress + array_off);
- cur_ptr[Index].PhysTBDArrayAddres = (UINT32)(cur_ptr[Index].PhysTCBAddress + array_off);
-
- cur_ptr->free_data_ptr = (UINT64) 0;
-
- if (Index < AdapterInfo->TxBufCnt - 1) {
- cur_ptr[Index].cb_header.link = cur_ptr[Index].PhysTCBAddress + sizeof (TxCB);
- cur_ptr[Index].NextTCBVirtualLinkPtr = &cur_ptr[Index + 1];
- cur_ptr[Index + 1].PrevTCBVirtualLinkPtr = &cur_ptr[Index];
- }
- }
-
- head_ptr = &cur_ptr[0];
- tail_ptr = &cur_ptr[AdapterInfo->TxBufCnt - 1];
- tail_ptr->cb_header.link = head_ptr->PhysTCBAddress;
- tail_ptr->NextTCBVirtualLinkPtr = head_ptr;
- head_ptr->PrevTCBVirtualLinkPtr = tail_ptr;
-
- AdapterInfo->FreeCBCount = AdapterInfo->TxBufCnt;
- AdapterInfo->FreeTxHeadPtr = head_ptr;
- //
- // set tail of the free list, next to this would be either in use
- // or the head itself
- //
- AdapterInfo->FreeTxTailPtr = tail_ptr;
-
- AdapterInfo->xmit_done_head = AdapterInfo->xmit_done_tail = 0;
-
- return 0;
-}
-
-TxCB *
-GetFreeCB (
- NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- TxCB *free_cb_ptr;
-
- //
- // claim any hanging free CBs
- //
- if (AdapterInfo->FreeCBCount <= 1) {
- CheckCBList (AdapterInfo);
- }
-
- //
- // don't use up the last CB problem if the previous CB that the CU used
- // becomes the last CB we submit because of the SUSPEND bit we set.
- // the CU thinks it was never cleared.
- //
-
- if (AdapterInfo->FreeCBCount <= 1) {
- return NULL;
- }
-
- BlockIt (AdapterInfo, TRUE);
- free_cb_ptr = AdapterInfo->FreeTxHeadPtr;
- AdapterInfo->FreeTxHeadPtr = free_cb_ptr->NextTCBVirtualLinkPtr;
- --AdapterInfo->FreeCBCount;
- BlockIt (AdapterInfo, FALSE);
- return free_cb_ptr;
-}
-
-VOID
-SetFreeCB (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN TxCB *cb_ptr
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
- cb_ptr - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- //
- // here we assume cb are returned in the order they are taken out
- // and we link the newly freed cb at the tail of free cb list
- //
- cb_ptr->cb_header.status = 0;
- cb_ptr->free_data_ptr = (UINT64) 0;
-
- AdapterInfo->FreeTxTailPtr = cb_ptr;
- ++AdapterInfo->FreeCBCount;
- return ;
-}
-
-UINT16
-next (
- IN UINT16 ind
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- ind - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- UINT16 Tmp;
-
- Tmp = (UINT16) (ind + 1);
- if (Tmp >= (TX_BUFFER_COUNT << 1)) {
- Tmp = 0;
- }
-
- return Tmp;
-}
-
-UINT16
-CheckCBList (
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- TxCB *Tmp_ptr;
- UINT16 cnt;
-
- cnt = 0;
- while (1) {
- Tmp_ptr = AdapterInfo->FreeTxTailPtr->NextTCBVirtualLinkPtr;
- if ((Tmp_ptr->cb_header.status & CMD_STATUS_MASK) != 0) {
- //
- // check if Q is full
- //
- if (next (AdapterInfo->xmit_done_tail) != AdapterInfo->xmit_done_head) {
- AdapterInfo->xmit_done[AdapterInfo->xmit_done_tail] = Tmp_ptr->free_data_ptr;
-
- UnMapIt (
- AdapterInfo,
- Tmp_ptr->free_data_ptr,
- Tmp_ptr->TBDArray[0].buf_len,
- TO_DEVICE,
- (UINT64) Tmp_ptr->TBDArray[0].phys_buf_addr
- );
-
- AdapterInfo->xmit_done_tail = next (AdapterInfo->xmit_done_tail);
- }
-
- SetFreeCB (AdapterInfo, Tmp_ptr);
- } else {
- break;
- }
- }
-
- return cnt;
-}
-//
-// Description : Initialize the RFD list list by linking each element together
-// in a circular list. The simplified memory model is used.
-// All data is in the RFD. The RFDs are linked together and the
-// last one points back to the first one. When the current RFD
-// is processed (frame received), its EL bit is set and the EL
-// bit in the previous RXFD is cleared.
-// Allocation done during INIT, this is making linked list.
-//
-UINT8
-SetupReceiveQueues (
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- RxFD *rx_ptr;
- RxFD *tail_ptr;
- UINT16 Index;
-
- AdapterInfo->cur_rx_ind = 0;
- rx_ptr = (&AdapterInfo->rx_ring[0]);
-
- for (Index = 0; Index < AdapterInfo->RxBufCnt; Index++) {
- rx_ptr[Index].cb_header.status = 0;
- rx_ptr[Index].cb_header.command = 0;
- rx_ptr[Index].RFDSize = RX_BUFFER_SIZE;
- rx_ptr[Index].ActualCount = 0;
- //
- // RBDs not used, simple memory model
- //
- rx_ptr[Index].rx_buf_addr = (UINT32) (-1);
-
- //
- // RBDs not used, simple memory model
- //
- rx_ptr[Index].forwarded = FALSE;
-
- //
- // don't use Tmp_ptr if it is beyond the last one
- //
- if (Index < AdapterInfo->RxBufCnt - 1) {
- rx_ptr[Index].cb_header.link = (UINT32) AdapterInfo->rx_phy_addr + ((Index + 1) * sizeof (RxFD));
- }
- }
-
- tail_ptr = (&AdapterInfo->rx_ring[AdapterInfo->RxBufCnt - 1]);
- tail_ptr->cb_header.link = (UINT32) AdapterInfo->rx_phy_addr;
-
- //
- // set the EL bit
- //
- tail_ptr->cb_header.command = 0xC000;
- AdapterInfo->RFDTailPtr = tail_ptr;
- return 0;
-}
-
-VOID
-Recycle_RFD (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN UINT16 rx_index
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
- rx_index - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- RxFD *rx_ptr;
- RxFD *tail_ptr;
- //
- // change the EL bit and change the AdapterInfo->RxTailPtr
- // rx_ptr is assumed to be the head of the Q
- // AdapterInfo->rx_forwarded[rx_index] = FALSE;
- //
- rx_ptr = &AdapterInfo->rx_ring[rx_index];
- tail_ptr = AdapterInfo->RFDTailPtr;
- //
- // set el_bit and suspend bit
- //
- rx_ptr->cb_header.command = 0xc000;
- rx_ptr->cb_header.status = 0;
- rx_ptr->ActualCount = 0;
- rx_ptr->forwarded = FALSE;
- AdapterInfo->RFDTailPtr = rx_ptr;
- //
- // resetting the el_bit.
- //
- tail_ptr->cb_header.command = 0;
- //
- // check the receive unit, fix if there is any problem
- //
- return ;
-}
-//
-// Serial EEPROM section.
-//
-// EEPROM_Ctrl bits.
-//
-#define EE_SHIFT_CLK 0x01 /* EEPROM shift clock. */
-#define EE_CS 0x02 /* EEPROM chip select. */
-#define EE_DI 0x04 /* EEPROM chip data in. */
-#define EE_WRITE_0 0x01
-#define EE_WRITE_1 0x05
-#define EE_DO 0x08 /* EEPROM chip data out. */
-#define EE_ENB (0x4800 | EE_CS)
-
-//
-// Delay between EEPROM clock transitions.
-// This will actually work with no delay on 33Mhz PCI.
-//
-#define eeprom_delay(nanosec) DelayIt (AdapterInfo, nanosec);
-
-//
-// The EEPROM commands include the alway-set leading bit.
-//
-#define EE_WRITE_CMD 5 // 101b
-#define EE_READ_CMD 6 // 110b
-#define EE_ERASE_CMD (7 << 6)
-
-STATIC
-VOID
-shift_bits_out (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN UINT16 val,
- IN UINT8 num_bits
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
- val - TODO: add argument description
- num_bits - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- INT32 Index;
- UINT8 Tmp;
- UINT32 EEAddr;
-
- EEAddr = AdapterInfo->ioaddr + SCBeeprom;
-
- for (Index = num_bits; Index >= 0; Index--) {
- INT16 dataval;
-
- //
- // will be 0 or 4
- //
- dataval = (INT16) ((val & (1 << Index)) ? EE_DI : 0);
-
- //
- // mask off the data_in bit
- //
- Tmp = (UINT8) (InByte (AdapterInfo, EEAddr) &~EE_DI);
- Tmp = (UINT8) (Tmp | dataval);
- OutByte (AdapterInfo, Tmp, EEAddr);
- eeprom_delay (100);
- //
- // raise the eeprom clock
- //
- OutByte (AdapterInfo, (UINT8) (Tmp | EE_SHIFT_CLK), EEAddr);
- eeprom_delay (150);
- //
- // lower the eeprom clock
- //
- OutByte (AdapterInfo, (UINT8) (Tmp &~EE_SHIFT_CLK), EEAddr);
- eeprom_delay (150);
- }
-}
-
-STATIC
-UINT16
-shift_bits_in (
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- UINT8 Tmp;
- INT32 Index;
- UINT16 retval;
- UINT32 EEAddr;
-
- EEAddr = AdapterInfo->ioaddr + SCBeeprom;
-
- retval = 0;
- for (Index = 15; Index >= 0; Index--) {
- //
- // raise the clock
- //
-
- //
- // mask off the data_in bit
- //
- Tmp = InByte (AdapterInfo, EEAddr);
- OutByte (AdapterInfo, (UINT8) (Tmp | EE_SHIFT_CLK), EEAddr);
- eeprom_delay (100);
- Tmp = InByte (AdapterInfo, EEAddr);
- retval = (UINT16) ((retval << 1) | ((Tmp & EE_DO) ? 1 : 0));
- //
- // lower the clock
- //
- OutByte (AdapterInfo, (UINT8) (Tmp &~EE_SHIFT_CLK), EEAddr);
- eeprom_delay (100);
- }
-
- return retval;
-}
-
-STATIC
-BOOLEAN
-E100bSetEepromLockOut (
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine sets the EEPROM lockout bit to gain exclusive access to the
- eeprom. the access bit is the most significant bit in the General Control
- Register 2 in the SCB space.
-
-Arguments:
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- TRUE - if it got the access
- FALSE - if it fails to get the exclusive access
-
---*/
-{
- UINTN wait;
- UINT8 tmp;
-
- if ((AdapterInfo->DeviceID == D102_DEVICE_ID) ||
- (AdapterInfo->RevID >= D102_REVID)) {
-
- wait = 500;
-
- while (wait--) {
-
- tmp = InByte (AdapterInfo, AdapterInfo->ioaddr + SCBGenCtrl2);
- tmp |= GCR2_EEPROM_ACCESS_SEMAPHORE;
- OutByte (AdapterInfo, tmp, AdapterInfo->ioaddr + SCBGenCtrl2);
-
- DelayIt (AdapterInfo, 50);
- tmp = InByte (AdapterInfo, AdapterInfo->ioaddr + SCBGenCtrl2);
-
- if (tmp & GCR2_EEPROM_ACCESS_SEMAPHORE) {
- return TRUE;
- }
- }
-
- return FALSE;
- }
-
- return TRUE;
-}
-
-STATIC
-VOID
-E100bReSetEepromLockOut (
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine Resets the EEPROM lockout bit to giveup access to the
- eeprom. the access bit is the most significant bit in the General Control
- Register 2 in the SCB space.
-
-Arguments:
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- UINT8 tmp;
-
- if ((AdapterInfo->DeviceID == D102_DEVICE_ID) ||
- (AdapterInfo->RevID >= D102_REVID)) {
-
- tmp = InByte (AdapterInfo, AdapterInfo->ioaddr + SCBGenCtrl2);
- tmp &= ~(GCR2_EEPROM_ACCESS_SEMAPHORE);
- OutByte (AdapterInfo, tmp, AdapterInfo->ioaddr + SCBGenCtrl2);
-
- DelayIt (AdapterInfo, 50);
- }
-}
-
-UINT16
-E100bReadEeprom (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN INT32 Location,
- IN UINT8 AddrLen
- )
-/*++
-
-Routine Description:
- Using the NIC data structure information, read the EEPROM to get a Word of data for the MAC address.
-
-Arguments:
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
- Location - Word offset into the MAC address to read.
- AddrLen - Number of bits of address length.
-
-Returns:
- RetVal - The word read from the EEPROM.
-
---*/
-{
- UINT16 RetVal;
- UINT8 Tmp;
-
- UINT32 EEAddr;
- UINT16 ReadCmd;
-
- EEAddr = AdapterInfo->ioaddr + SCBeeprom;
- ReadCmd = (UINT16) (Location | (EE_READ_CMD << AddrLen));
-
- RetVal = 0;
-
- //
- // get exclusive access to the eeprom first!
- //
- E100bSetEepromLockOut (AdapterInfo);
-
- //
- // eeprom control reg bits: x,x,x,x,DO,DI,CS,SK
- // to write the opcode+data value out one bit at a time in DI starting at msb
- // and then out a 1 to sk, wait, out 0 to SK and wait
- // repeat this for all the bits to be written
- //
-
- //
- // 11110010b
- //
- Tmp = (UINT8) (InByte (AdapterInfo, EEAddr) & 0xF2);
- OutByte (AdapterInfo, (UINT8) (Tmp | EE_CS), EEAddr);
-
- //
- // 3 for the read opcode 110b
- //
- shift_bits_out (AdapterInfo, ReadCmd, (UINT8) (3 + AddrLen));
-
- //
- // read the eeprom word one bit at a time
- //
- RetVal = shift_bits_in (AdapterInfo);
-
- //
- // Terminate the EEPROM access and leave eeprom in a clean state.
- //
- Tmp = InByte (AdapterInfo, EEAddr);
- Tmp &= ~(EE_CS | EE_DI);
- OutByte (AdapterInfo, Tmp, EEAddr);
-
- //
- // raise the clock and lower the eeprom shift clock
- //
- OutByte (AdapterInfo, (UINT8) (Tmp | EE_SHIFT_CLK), EEAddr);
- eeprom_delay (100);
-
- OutByte (AdapterInfo, (UINT8) (Tmp &~EE_SHIFT_CLK), EEAddr);
- eeprom_delay (100);
-
- //
- // giveup access to the eeprom
- //
- E100bReSetEepromLockOut (AdapterInfo);
-
- return RetVal;
-}
-
-UINT8
-E100bGetEepromAddrLen (
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- Using the NIC data structure information, read the EEPROM to determine how many bits of address length
- this EEPROM is in Words.
-
-Arguments:
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- RetVal - The word read from the EEPROM.
-
---*/
-{
- UINT8 Tmp;
- UINT8 AddrLen;
- UINT32 EEAddr;
- //
- // assume 64word eeprom (so,6 bits of address_length)
- //
- UINT16 ReadCmd;
-
- EEAddr = AdapterInfo->ioaddr + SCBeeprom;
- ReadCmd = (EE_READ_CMD << 6);
-
- //
- // get exclusive access to the eeprom first!
- //
- E100bSetEepromLockOut (AdapterInfo);
-
- //
- // address we are trying to read is 0
- // eeprom control reg bits: x,x,x,x,DO,,DI,,CS,SK
- // to write the opcode+data value out one bit at a time in DI starting at msb
- // and then out a 1 to sk, wait, out 0 to SK and wait
- // repeat this for all the bits to be written
- //
- Tmp = (UINT8) (InByte (AdapterInfo, EEAddr) & 0xF2);
-
- //
- // enable eeprom access
- //
- OutByte (AdapterInfo, (UINT8) (Tmp | EE_CS), EEAddr);
-
- //
- // 3 for opcode, 6 for the default address len
- //
- shift_bits_out (AdapterInfo, ReadCmd, (UINT8) (3 + 6));
-
- //
- // (in case of a 64 word eeprom).
- // read the "dummy zero" from EE_DO to say that the address we wrote
- // (six 0s) is accepted, write more zeros (until 8) to get a "dummy zero"
- //
-
- //
- // assume the smallest
- //
- AddrLen = 6;
- Tmp = InByte (AdapterInfo, EEAddr);
- while ((AddrLen < 8) && ((Tmp & EE_DO) != 0)) {
- OutByte (AdapterInfo, (UINT8) (Tmp &~EE_DI), EEAddr);
- eeprom_delay (100);
-
- //
- // raise the eeprom clock
- //
- OutByte (AdapterInfo, (UINT8) (Tmp | EE_SHIFT_CLK), EEAddr);
- eeprom_delay (150);
-
- //
- // lower the eeprom clock
- //
- OutByte (AdapterInfo, (UINT8) (Tmp &~EE_SHIFT_CLK), EEAddr);
- eeprom_delay (150);
- Tmp = InByte (AdapterInfo, EEAddr);
- AddrLen++;
- }
-
- //
- // read the eeprom word, even though we don't need this
- //
- shift_bits_in (AdapterInfo);
-
- //
- // Terminate the EEPROM access.
- //
- Tmp = InByte (AdapterInfo, EEAddr);
- Tmp &= ~(EE_CS | EE_DI);
- OutByte (AdapterInfo, Tmp, EEAddr);
-
- //
- // raise the clock and lower the eeprom shift clock
- //
- OutByte (AdapterInfo, (UINT8) (Tmp | EE_SHIFT_CLK), EEAddr);
- eeprom_delay (100);
-
- OutByte (AdapterInfo, (UINT8) (Tmp &~EE_SHIFT_CLK), EEAddr);
- eeprom_delay (100);
-
- //
- // giveup access to the eeprom!
- //
- E100bReSetEepromLockOut (AdapterInfo);
-
- return AddrLen;
-}
-
-UINTN
-E100bStatistics (
- NIC_DATA_INSTANCE *AdapterInfo,
- UINT64 DBaddr,
- UINT16 DBsize
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
- DBaddr - TODO: add argument description
- DBsize - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- PXE_DB_STATISTICS db;
- //
- // wait upto one second (each wait is 100 micro s)
- //
- UINT32 Wait;
- Wait = 10000;
- wait_for_cmd_done (AdapterInfo->ioaddr + SCBCmd);
-
- //
- // Clear statistics done marker.
- //
- AdapterInfo->statistics->done_marker = 0;
-
- //
- // Issue statistics dump (or dump w/ reset) command.
- //
- OutByte (
- AdapterInfo,
- (UINT8) (DBsize ? CU_SHOWSTATS : CU_DUMPSTATS),
- (UINT32) (AdapterInfo->ioaddr + SCBCmd)
- );
-
- //
- // Wait for command to complete.
- //
- // zero the db here just to chew up a little more time.
- //
-
- ZeroMem ((VOID *) &db, sizeof db);
-
- while (Wait != 0) {
- //
- // Wait a bit before checking.
- //
-
- DelayIt (AdapterInfo, 100);
-
- //
- // Look for done marker at end of statistics.
- //
-
- switch (AdapterInfo->statistics->done_marker) {
- case 0xA005:
- case 0xA007:
- break;
-
- default:
- Wait--;
- continue;
- }
-
- //
- // if we did not "continue" from the above switch, we are done,
- //
- break;
- }
-
- //
- // If this is a reset, we are out of here!
- //
- if (DBsize == 0) {
- return PXE_STATCODE_SUCCESS;
- }
-
- //
- // Convert NIC statistics counter format to EFI/UNDI
- // specification statistics counter format.
- //
-
- //
- // 54 3210 fedc ba98 7654 3210
- // db.Supported = 01 0000 0100 1101 0001 0111;
- //
- db.Supported = 0x104D17;
-
- //
- // Statistics from the NIC
- //
-
- db.Data[0x01] = AdapterInfo->statistics->rx_good_frames;
-
- db.Data[0x02] = AdapterInfo->statistics->rx_runt_errs;
-
- db.Data[0x08] = AdapterInfo->statistics->rx_crc_errs +
- AdapterInfo->statistics->rx_align_errs;
-
- db.Data[0x04] = db.Data[0x02] +
- db.Data[0x08] +
- AdapterInfo->statistics->rx_resource_errs +
- AdapterInfo->statistics->rx_overrun_errs;
-
- db.Data[0x00] = db.Data[0x01] + db.Data[0x04];
-
- db.Data[0x0B] = AdapterInfo->statistics->tx_good_frames;
-
- db.Data[0x0E] = AdapterInfo->statistics->tx_coll16_errs +
- AdapterInfo->statistics->tx_late_colls +
- AdapterInfo->statistics->tx_underruns +
- AdapterInfo->statistics->tx_one_colls +
- AdapterInfo->statistics->tx_multi_colls;
-
- db.Data[0x14] = AdapterInfo->statistics->tx_total_colls;
-
- db.Data[0x0A] = db.Data[0x0B] +
- db.Data[0x0E] +
- AdapterInfo->statistics->tx_lost_carrier;
-
- if (DBsize > sizeof db) {
- DBsize = sizeof db;
- }
-
- CopyMem ((VOID *) (UINTN) DBaddr, (VOID *) &db, (UINTN) DBsize);
-
- return PXE_STATCODE_SUCCESS;
-}
-
-UINTN
-E100bReset (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN INT32 OpFlags
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
- OpFlags - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
-
- UINT16 save_filter;
- //
- // disable the interrupts
- //
- OutWord (AdapterInfo, INT_MASK, AdapterInfo->ioaddr + SCBCmd);
-
- //
- // wait for the tx queue to complete
- //
- CheckCBList (AdapterInfo);
-
- XmitWaitForCompletion (AdapterInfo);
-
- if (AdapterInfo->Receive_Started) {
- StopRU (AdapterInfo);
- }
-
- InitializeChip (AdapterInfo);
-
- //
- // check the opflags and restart receive filters
- //
- if ((OpFlags & PXE_OPFLAGS_RESET_DISABLE_FILTERS) == 0) {
-
- save_filter = AdapterInfo->Rx_Filter;
- //
- // if we give the filter same as Rx_Filter,
- // this routine will not set mcast list (it thinks there is no change)
- // to force it, we will reset that flag in the Rx_Filter
- //
- AdapterInfo->Rx_Filter &= (~PXE_OPFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST);
- E100bSetfilter (AdapterInfo, save_filter, (UINT64) 0, (UINT32) 0);
- }
-
- if ((OpFlags & PXE_OPFLAGS_RESET_DISABLE_INTERRUPTS) != 0) {
- //
- // disable the interrupts
- //
- AdapterInfo->int_mask = 0;
- }
- //
- // else leave the interrupt in the pre-set state!!!
- //
- E100bSetInterruptState (AdapterInfo);
-
- return 0;
-}
-
-UINTN
-E100bShutdown (
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- //
- // disable the interrupts
- //
- OutWord (AdapterInfo, INT_MASK, AdapterInfo->ioaddr + SCBCmd);
-
- //
- // stop the receive unit
- //
- if (AdapterInfo->Receive_Started) {
- StopRU (AdapterInfo);
- }
-
- //
- // wait for the tx queue to complete
- //
- CheckCBList (AdapterInfo);
- if (AdapterInfo->FreeCBCount != AdapterInfo->TxBufCnt) {
- wait_for_cmd_done (AdapterInfo->ioaddr + SCBCmd);
- }
-
- //
- // we do not want to reset the phy, it takes a long time to renegotiate the
- // link after that (3-4 seconds)
- //
- InitializeChip (AdapterInfo);
- SelectiveReset (AdapterInfo);
- return 0;
-}
-
-VOID
-MdiWrite (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN UINT8 RegAddress,
- IN UINT8 PhyAddress,
- IN UINT16 DataValue
- )
-/*++
-
-Routine Description:
- This routine will write a value to the specified MII register
- of an external MDI compliant device (e.g. PHY 100). The command will
- execute in polled mode.
-
-Arguments:
- AdapterInfo - pointer to the structure that contains the NIC's context.
- RegAddress - The MII register that we are writing to
- PhyAddress - The MDI address of the Phy component.
- DataValue - The value that we are writing to the MII register.
-
-Returns:
- nothing
---*/
-{
- UINT32 WriteCommand;
-
- WriteCommand = ((UINT32) DataValue) |
- ((UINT32)(RegAddress << 16)) |
- ((UINT32)(PhyAddress << 21)) |
- ((UINT32)(MDI_WRITE << 26));
-
- //
- // Issue the write command to the MDI control register.
- //
- OutLong (AdapterInfo, WriteCommand, AdapterInfo->ioaddr + SCBCtrlMDI);
-
- //
- // wait 20usec before checking status
- //
- DelayIt (AdapterInfo, 20);
-
- //
- // poll for the mdi write to complete
- while ((InLong (AdapterInfo, AdapterInfo->ioaddr + SCBCtrlMDI) &
- MDI_PHY_READY) == 0){
- DelayIt (AdapterInfo, 20);
- }
-}
-
-VOID
-MdiRead (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN UINT8 RegAddress,
- IN UINT8 PhyAddress,
- IN OUT UINT16 *DataValue
- )
-/*++
-
-Routine Description:
- This routine will read a value from the specified MII register
- of an external MDI compliant device (e.g. PHY 100), and return
- it to the calling routine. The command will execute in polled mode.
-
-Arguments:
- AdapterInfo - pointer to the structure that contains the NIC's context.
- RegAddress - The MII register that we are reading from
- PhyAddress - The MDI address of the Phy component.
- DataValue - pointer to the value that we read from the MII register.
-
-Returns:
-
---*/
-{
- UINT32 ReadCommand;
-
- ReadCommand = ((UINT32) (RegAddress << 16)) |
- ((UINT32) (PhyAddress << 21)) |
- ((UINT32) (MDI_READ << 26));
-
- //
- // Issue the read command to the MDI control register.
- //
- OutLong (AdapterInfo, ReadCommand, AdapterInfo->ioaddr + SCBCtrlMDI);
-
- //
- // wait 20usec before checking status
- //
- DelayIt (AdapterInfo, 20);
-
- //
- // poll for the mdi read to complete
- //
- while ((InLong (AdapterInfo, AdapterInfo->ioaddr + SCBCtrlMDI) &
- MDI_PHY_READY) == 0) {
- DelayIt (AdapterInfo, 20);
-
- }
-
- *DataValue = InWord (AdapterInfo, AdapterInfo->ioaddr + SCBCtrlMDI);
-}
-
-VOID
-PhyReset (
- NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine will reset the PHY that the adapter is currently
- configured to use.
-
-Arguments:
- AdapterInfo - pointer to the structure that contains the NIC's context.
-
-Returns:
-
---*/
-{
- UINT16 MdiControlReg;
-
- MdiControlReg = (MDI_CR_AUTO_SELECT |
- MDI_CR_RESTART_AUTO_NEG |
- MDI_CR_RESET);
-
- //
- // Write the MDI control register with our new Phy configuration
- //
- MdiWrite (
- AdapterInfo,
- MDI_CONTROL_REG,
- AdapterInfo->PhyAddress,
- MdiControlReg
- );
-
- return ;
-}
-
-BOOLEAN
-PhyDetect (
- NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine will detect what phy we are using, set the line
- speed, FDX or HDX, and configure the phy if necessary.
-
- The following combinations are supported:
- - TX or T4 PHY alone at PHY address 1
- - T4 or TX PHY at address 1 and MII PHY at address 0
- - 82503 alone (10Base-T mode, no full duplex support)
- - 82503 and MII PHY (TX or T4) at address 0
-
- The sequence / priority of detection is as follows:
- - PHY 1 with cable termination
- - PHY 0 with cable termination
- - PHY 1 (if found) without cable termination
- - 503 interface
-
- Additionally auto-negotiation capable (NWAY) and parallel
- detection PHYs are supported. The flow-chart is described in
- the 82557 software writer's manual.
-
- NOTE: 1. All PHY MDI registers are read in polled mode.
- 2. The routines assume that the 82557 has been RESET and we have
- obtained the virtual memory address of the CSR.
- 3. PhyDetect will not RESET the PHY.
- 4. If FORCEFDX is set, SPEED should also be set. The driver will
- check the values for inconsistency with the detected PHY
- technology.
- 5. PHY 1 (the PHY on the adapter) may have an address in the range
- 1 through 31 inclusive. The driver will accept addresses in
- this range.
- 6. Driver ignores FORCEFDX and SPEED overrides if a 503 interface
- is detected.
-
-Arguments:
- AdapterInfo - pointer to the structure that contains the NIC's context.
-
-Returns:
- TRUE - If a Phy was detected, and configured correctly.
- FALSE - If a valid phy could not be detected and configured.
-
---*/
-{
- UINT16 *eedata;
- UINT16 MdiControlReg;
- UINT16 MdiStatusReg;
- BOOLEAN FoundPhy1;
- UINT8 ReNegotiateTime;
-
- eedata = (UINT16 *) (&AdapterInfo->NVData[0]);
-
- FoundPhy1 = FALSE;
- ReNegotiateTime = 35;
- //
- // EEPROM word [6] contains the Primary PHY record in which the least 3 bits
- // indicate the PHY address
- // and word [7] contains the secondary PHY record
- //
- AdapterInfo->PhyRecord[0] = eedata[6];
- AdapterInfo->PhyRecord[1] = eedata[7];
- AdapterInfo->PhyAddress = (UINT8) (AdapterInfo->PhyRecord[0] & 7);
-
- //
- // Check for a phy address over-ride of 32 which indicates force use of 82503
- // not detecting the link in this case
- //
- if (AdapterInfo->PhyAddress == 32) {
- //
- // 503 interface over-ride
- // Record the current speed and duplex. We will be in half duplex
- // mode unless the user used the force full duplex over-ride.
- //
- AdapterInfo->LinkSpeed = 10;
- return (TRUE);
- }
-
- //
- // If the Phy Address is between 1-31 then we must first look for phy 1,
- // at that address.
- //
- if ((AdapterInfo->PhyAddress > 0) && (AdapterInfo->PhyAddress < 32)) {
-
- //
- // Read the MDI control and status registers at phy 1
- // and check if we found a valid phy
- //
- MdiRead (
- AdapterInfo,
- MDI_CONTROL_REG,
- AdapterInfo->PhyAddress,
- &MdiControlReg
- );
-
- MdiRead (
- AdapterInfo,
- MDI_STATUS_REG,
- AdapterInfo->PhyAddress,
- &MdiStatusReg
- );
-
- if (!((MdiControlReg == 0xffff) ||
- ((MdiStatusReg == 0) && (MdiControlReg == 0)))) {
-
- //
- // we have a valid phy1
- // Read the status register again because of sticky bits
- //
- FoundPhy1 = TRUE;
- MdiRead (
- AdapterInfo,
- MDI_STATUS_REG,
- AdapterInfo->PhyAddress,
- &MdiStatusReg
- );
-
- //
- // If there is a valid link then use this Phy.
- //
- if (MdiStatusReg & MDI_SR_LINK_STATUS) {
- return (SetupPhy(AdapterInfo));
- }
- }
- }
-
- //
- // Next try to detect a PHY at address 0x00 because there was no Phy 1,
- // or Phy 1 didn't have link, or we had a phy 0 over-ride
- //
-
- //
- // Read the MDI control and status registers at phy 0
- //
- MdiRead (AdapterInfo, MDI_CONTROL_REG, 0, &MdiControlReg);
- MdiRead (AdapterInfo, MDI_STATUS_REG, 0, &MdiStatusReg);
-
- //
- // check if we found a valid phy 0
- //
- if (((MdiControlReg == 0xffff) ||
- ((MdiStatusReg == 0) && (MdiControlReg == 0)))) {
-
- //
- // we don't have a valid phy at address 0
- // if phy address was forced to 0, then error out because we
- // didn't find a phy at that address
- //
- if (AdapterInfo->PhyAddress == 0x0000) {
- return (FALSE);
- } else {
- //
- // at this point phy1 does not have link and there is no phy 0 at all
- // if we are forced to detect the cable, error out here!
- //
- if (AdapterInfo->CableDetect != 0) {
- return FALSE;
-
- }
-
- if (FoundPhy1) {
- //
- // no phy 0, but there is a phy 1 (no link I guess), so use phy 1
- //
- return SetupPhy (AdapterInfo);
- } else {
- //
- // didn't find phy 0 or phy 1, so assume a 503 interface
- //
- AdapterInfo->PhyAddress = 32;
-
- //
- // Record the current speed and duplex. We'll be in half duplex
- // mode unless the user used the force full duplex over-ride.
- //
- AdapterInfo->LinkSpeed = 10;
- return (TRUE);
- }
- }
- } else {
- //
- // We have a valid phy at address 0. If phy 0 has a link then we use
- // phy 0. If Phy 0 doesn't have a link then we use Phy 1 (no link)
- // if phy 1 is present, or phy 0 if phy 1 is not present
- // If phy 1 was present, then we must isolate phy 1 before we enable
- // phy 0 to see if Phy 0 has a link.
- //
- if (FoundPhy1) {
- //
- // isolate phy 1
- //
- MdiWrite (
- AdapterInfo,
- MDI_CONTROL_REG,
- AdapterInfo->PhyAddress,
- MDI_CR_ISOLATE
- );
-
- //
- // wait 100 microseconds for the phy to isolate.
- //
- DelayIt (AdapterInfo, 100);
- }
-
- //
- // Since this Phy is at address 0, we must enable it. So clear
- // the isolate bit, and set the auto-speed select bit
- //
- MdiWrite (
- AdapterInfo,
- MDI_CONTROL_REG,
- 0,
- MDI_CR_AUTO_SELECT
- );
-
- //
- // wait 100 microseconds for the phy to be enabled.
- //
- DelayIt (AdapterInfo, 100);
-
- //
- // restart the auto-negotion process
- //
- MdiWrite (
- AdapterInfo,
- MDI_CONTROL_REG,
- 0,
- MDI_CR_RESTART_AUTO_NEG | MDI_CR_AUTO_SELECT
- );
-
- //
- // wait no more than 3.5 seconds for auto-negotiation to complete
- //
- while (ReNegotiateTime) {
- //
- // Read the status register twice because of sticky bits
- //
- MdiRead (AdapterInfo, MDI_STATUS_REG, 0, &MdiStatusReg);
- MdiRead (AdapterInfo, MDI_STATUS_REG, 0, &MdiStatusReg);
-
- if (MdiStatusReg & MDI_SR_AUTO_NEG_COMPLETE) {
- break;
- }
-
- DelayIt (AdapterInfo, 100);
- ReNegotiateTime--;
- }
-
- //
- // Read the status register again because of sticky bits
- //
- MdiRead (AdapterInfo, MDI_STATUS_REG, 0, &MdiStatusReg);
-
- //
- // If the link was not set
- //
- if ((MdiStatusReg & MDI_SR_LINK_STATUS) == 0) {
- //
- // PHY1 does not have a link and phy 0 does not have a link
- // do not proceed if we need to detect the link!
- //
- if (AdapterInfo->CableDetect != 0) {
- return FALSE;
- }
-
- //
- // the link wasn't set, so use phy 1 if phy 1 was present
- //
- if (FoundPhy1) {
- //
- // isolate phy 0
- //
- MdiWrite (AdapterInfo, MDI_CONTROL_REG, 0, MDI_CR_ISOLATE);
-
- //
- // wait 100 microseconds for the phy to isolate.
- //
- DelayIt (AdapterInfo, 100);
-
- //
- // Now re-enable PHY 1
- //
- MdiWrite (
- AdapterInfo,
- MDI_CONTROL_REG,
- AdapterInfo->PhyAddress,
- MDI_CR_AUTO_SELECT
- );
-
- //
- // wait 100 microseconds for the phy to be enabled
- //
- DelayIt (AdapterInfo, 100);
-
- //
- // restart the auto-negotion process
- //
- MdiWrite (
- AdapterInfo,
- MDI_CONTROL_REG,
- AdapterInfo->PhyAddress,
- MDI_CR_RESTART_AUTO_NEG | MDI_CR_AUTO_SELECT
- );
-
- //
- // Don't wait for it to complete (we didn't have link earlier)
- //
- return (SetupPhy (AdapterInfo));
- }
- }
-
- //
- // Definitely using Phy 0
- //
- AdapterInfo->PhyAddress = 0;
- return (SetupPhy(AdapterInfo));
- }
-}
-
-BOOLEAN
-SetupPhy (
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine will setup phy 1 or phy 0 so that it is configured
- to match a speed and duplex over-ride option. If speed or
- duplex mode is not explicitly specified in the registry, the
- driver will skip the speed and duplex over-ride code, and
- assume the adapter is automatically setting the line speed, and
- the duplex mode. At the end of this routine, any truly Phy
- specific code will be executed (each Phy has its own quirks,
- and some require that certain special bits are set).
-
- NOTE: The driver assumes that SPEED and FORCEFDX are specified at the
- same time. If FORCEDPX is set without speed being set, the driver
- will encouter a fatal error and log a message into the event viewer.
-
-Arguments:
- AdapterInfo - pointer to the structure that contains the NIC's context.
-
-Returns:
- TRUE - If the phy could be configured correctly
- FALSE - If the phy couldn't be configured correctly, because an
- unsupported over-ride option was used
-
---*/
-{
- UINT16 MdiControlReg;
- UINT16 MdiStatusReg;
- UINT16 MdiIdLowReg;
- UINT16 MdiIdHighReg;
- UINT16 MdiMiscReg;
- UINT32 PhyId;
- BOOLEAN ForcePhySetting;
-
- ForcePhySetting = FALSE;
-
- //
- // If we are NOT forcing a setting for line speed or full duplex, then
- // we won't force a link setting, and we'll jump down to the phy
- // specific code.
- //
- if (((AdapterInfo->LinkSpeedReq) || (AdapterInfo->DuplexReq))) {
- //
- // Find out what kind of technology this Phy is capable of.
- //
- MdiRead (
- AdapterInfo,
- MDI_STATUS_REG,
- AdapterInfo->PhyAddress,
- &MdiStatusReg
- );
-
- //
- // Read the MDI control register at our phy
- //
- MdiRead (
- AdapterInfo,
- MDI_CONTROL_REG,
- AdapterInfo->PhyAddress,
- &MdiControlReg
- );
-
- //
- // Now check the validity of our forced option. If the force option is
- // valid, then force the setting. If the force option is not valid,
- // we'll set a flag indicating that we should error out.
- //
-
- //
- // If speed is forced to 10mb
- //
- if (AdapterInfo->LinkSpeedReq == 10) {
- //
- // If half duplex is forced
- //
- if ((AdapterInfo->DuplexReq & PXE_FORCE_HALF_DUPLEX) != 0) {
- if (MdiStatusReg & MDI_SR_10T_HALF_DPX) {
-
- MdiControlReg &= ~(MDI_CR_10_100 | MDI_CR_AUTO_SELECT | MDI_CR_FULL_HALF);
- ForcePhySetting = TRUE;
- }
- } else if ((AdapterInfo->DuplexReq & PXE_FORCE_FULL_DUPLEX) != 0) {
-
- //
- // If full duplex is forced
- //
- if (MdiStatusReg & MDI_SR_10T_FULL_DPX) {
-
- MdiControlReg &= ~(MDI_CR_10_100 | MDI_CR_AUTO_SELECT);
- MdiControlReg |= MDI_CR_FULL_HALF;
- ForcePhySetting = TRUE;
- }
- } else {
- //
- // If auto duplex (we actually set phy to 1/2)
- //
- if (MdiStatusReg & (MDI_SR_10T_FULL_DPX | MDI_SR_10T_HALF_DPX)) {
-
- MdiControlReg &= ~(MDI_CR_10_100 | MDI_CR_AUTO_SELECT | MDI_CR_FULL_HALF);
- ForcePhySetting = TRUE;
- }
- }
- }
-
- //
- // If speed is forced to 100mb
- //
- else if (AdapterInfo->LinkSpeedReq == 100) {
- //
- // If half duplex is forced
- //
- if ((AdapterInfo->DuplexReq & PXE_FORCE_HALF_DUPLEX) != 0) {
- if (MdiStatusReg & (MDI_SR_TX_HALF_DPX | MDI_SR_T4_CAPABLE)) {
-
- MdiControlReg &= ~(MDI_CR_AUTO_SELECT | MDI_CR_FULL_HALF);
- MdiControlReg |= MDI_CR_10_100;
- ForcePhySetting = TRUE;
- }
- } else if ((AdapterInfo->DuplexReq & PXE_FORCE_FULL_DUPLEX) != 0) {
- //
- // If full duplex is forced
- //
- if (MdiStatusReg & MDI_SR_TX_FULL_DPX) {
- MdiControlReg &= ~MDI_CR_AUTO_SELECT;
- MdiControlReg |= (MDI_CR_10_100 | MDI_CR_FULL_HALF);
- ForcePhySetting = TRUE;
- }
- } else {
- //
- // If auto duplex (we set phy to 1/2)
- //
- if (MdiStatusReg & (MDI_SR_TX_HALF_DPX | MDI_SR_T4_CAPABLE)) {
-
- MdiControlReg &= ~(MDI_CR_AUTO_SELECT | MDI_CR_FULL_HALF);
- MdiControlReg |= MDI_CR_10_100;
- ForcePhySetting = TRUE;
- }
- }
- }
-
- if (!ForcePhySetting) {
- return (FALSE);
- }
-
- //
- // Write the MDI control register with our new Phy configuration
- //
- MdiWrite (
- AdapterInfo,
- MDI_CONTROL_REG,
- AdapterInfo->PhyAddress,
- MdiControlReg
- );
-
- //
- // wait 100 milliseconds for auto-negotiation to complete
- //
- DelayIt (AdapterInfo, 100);
- }
-
- //
- // Find out specifically what Phy this is. We do this because for certain
- // phys there are specific bits that must be set so that the phy and the
- // 82557 work together properly.
- //
-
- MdiRead (
- AdapterInfo,
- PHY_ID_REG_1,
- AdapterInfo->PhyAddress,
- &MdiIdLowReg
- );
- MdiRead (
- AdapterInfo,
- PHY_ID_REG_2,
- AdapterInfo->PhyAddress,
- &MdiIdHighReg
- );
-
- PhyId = ((UINT32) MdiIdLowReg | ((UINT32) MdiIdHighReg << 16));
-
- //
- // And out the revsion field of the Phy ID so that we'll be able to detect
- // future revs of the same Phy.
- //
- PhyId &= PHY_MODEL_REV_ID_MASK;
-
- //
- // Handle the National TX
- //
- if (PhyId == PHY_NSC_TX) {
-
- MdiRead (
- AdapterInfo,
- NSC_CONG_CONTROL_REG,
- AdapterInfo->PhyAddress,
- &MdiMiscReg
- );
-
- MdiMiscReg |= (NSC_TX_CONG_TXREADY | NSC_TX_CONG_F_CONNECT);
-
- MdiWrite (
- AdapterInfo,
- NSC_CONG_CONTROL_REG,
- AdapterInfo->PhyAddress,
- MdiMiscReg
- );
- }
-
- FindPhySpeedAndDpx (AdapterInfo, PhyId);
-
- //
- // We put a hardware fix on to our adapters to work-around the PHY_100 errata
- // described below. The following code is only compiled in, if we wanted
- // to attempt a software workaround to the PHY_100 A/B step problem.
- //
-
- return (TRUE);
-}
-
-VOID
-FindPhySpeedAndDpx (
- IN NIC_DATA_INSTANCE *AdapterInfo,
- IN UINT32 PhyId
- )
-/*++
-
-Routine Description:
- This routine will figure out what line speed and duplex mode
- the PHY is currently using.
-
-Arguments:
- AdapterInfo - pointer to the structure that contains the NIC's context.
- PhyId - The ID of the PHY in question.
-
-Returns:
- NOTHING
---*/
-{
- UINT16 MdiStatusReg;
- UINT16 MdiMiscReg;
- UINT16 MdiOwnAdReg;
- UINT16 MdiLinkPartnerAdReg;
-
- //
- // If there was a speed and/or duplex override, then set our current
- // value accordingly
- //
- AdapterInfo->LinkSpeed = AdapterInfo->LinkSpeedReq;
- AdapterInfo->Duplex = (UINT8) ((AdapterInfo->DuplexReq & PXE_FORCE_FULL_DUPLEX) ?
- FULL_DUPLEX : HALF_DUPLEX);
-
- //
- // If speed and duplex were forced, then we know our current settings, so
- // we'll just return. Otherwise, we'll need to figure out what NWAY set
- // us to.
- //
- if (AdapterInfo->LinkSpeed && AdapterInfo->Duplex) {
- return ;
-
- }
- //
- // If we didn't have a valid link, then we'll assume that our current
- // speed is 10mb half-duplex.
- //
-
- //
- // Read the status register twice because of sticky bits
- //
- MdiRead (
- AdapterInfo,
- MDI_STATUS_REG,
- AdapterInfo->PhyAddress,
- &MdiStatusReg
- );
- MdiRead (
- AdapterInfo,
- MDI_STATUS_REG,
- AdapterInfo->PhyAddress,
- &MdiStatusReg
- );
-
- //
- // If there wasn't a valid link then use default speed & duplex
- //
- if (!(MdiStatusReg & MDI_SR_LINK_STATUS)) {
-
- AdapterInfo->LinkSpeed = 10;
- AdapterInfo->Duplex = HALF_DUPLEX;
- return ;
- }
-
- //
- // If this is an Intel PHY (a T4 PHY_100 or a TX PHY_TX), then read bits
- // 1 and 0 of extended register 0, to get the current speed and duplex
- // settings.
- //
- if ((PhyId == PHY_100_A) || (PhyId == PHY_100_C) || (PhyId == PHY_TX_ID)) {
- //
- // Read extended register 0
- //
- MdiRead (
- AdapterInfo,
- EXTENDED_REG_0,
- AdapterInfo->PhyAddress,
- &MdiMiscReg
- );
-
- //
- // Get current speed setting
- //
- if (MdiMiscReg & PHY_100_ER0_SPEED_INDIC) {
- AdapterInfo->LinkSpeed = 100;
- } else {
- AdapterInfo->LinkSpeed = 10;
- }
-
- //
- // Get current duplex setting -- if bit is set then FDX is enabled
- //
- if (MdiMiscReg & PHY_100_ER0_FDX_INDIC) {
- AdapterInfo->Duplex = FULL_DUPLEX;
- } else {
- AdapterInfo->Duplex = HALF_DUPLEX;
- }
-
- return ;
- }
- //
- // Read our link partner's advertisement register
- //
- MdiRead (
- AdapterInfo,
- AUTO_NEG_LINK_PARTNER_REG,
- AdapterInfo->PhyAddress,
- &MdiLinkPartnerAdReg
- );
-
- //
- // See if Auto-Negotiation was complete (bit 5, reg 1)
- //
- MdiRead (
- AdapterInfo,
- MDI_STATUS_REG,
- AdapterInfo->PhyAddress,
- &MdiStatusReg
- );
-
- //
- // If a True NWAY connection was made, then we can detect speed/duplex by
- // ANDing our adapter's advertised abilities with our link partner's
- // advertised ablilities, and then assuming that the highest common
- // denominator was chosed by NWAY.
- //
- if ((MdiLinkPartnerAdReg & NWAY_LP_ABILITY) &&
- (MdiStatusReg & MDI_SR_AUTO_NEG_COMPLETE)) {
-
- //
- // Read our advertisement register
- //
- MdiRead (
- AdapterInfo,
- AUTO_NEG_ADVERTISE_REG,
- AdapterInfo->PhyAddress,
- &MdiOwnAdReg
- );
-
- //
- // AND the two advertisement registers together, and get rid of any
- // extraneous bits.
- //
- MdiOwnAdReg = (UINT16) (MdiOwnAdReg & (MdiLinkPartnerAdReg & NWAY_LP_ABILITY));
-
- //
- // Get speed setting
- //
- if (MdiOwnAdReg & (NWAY_AD_TX_HALF_DPX | NWAY_AD_TX_FULL_DPX | NWAY_AD_T4_CAPABLE)) {
- AdapterInfo->LinkSpeed = 100;
- } else {
- AdapterInfo->LinkSpeed = 10;
- }
-
- //
- // Get duplex setting -- use priority resolution algorithm
- //
- if (MdiOwnAdReg & (NWAY_AD_T4_CAPABLE)) {
- AdapterInfo->Duplex = HALF_DUPLEX;
- return ;
- } else if (MdiOwnAdReg & (NWAY_AD_TX_FULL_DPX)) {
- AdapterInfo->Duplex = FULL_DUPLEX;
- return ;
- } else if (MdiOwnAdReg & (NWAY_AD_TX_HALF_DPX)) {
- AdapterInfo->Duplex = HALF_DUPLEX;
- return ;
- } else if (MdiOwnAdReg & (NWAY_AD_10T_FULL_DPX)) {
- AdapterInfo->Duplex = FULL_DUPLEX;
- return ;
- } else {
- AdapterInfo->Duplex = HALF_DUPLEX;
- return ;
- }
- }
-
- //
- // If we are connected to a dumb (non-NWAY) repeater or hub, and the line
- // speed was determined automatically by parallel detection, then we have
- // no way of knowing exactly what speed the PHY is set to unless that PHY
- // has a propietary register which indicates speed in this situation. The
- // NSC TX PHY does have such a register. Also, since NWAY didn't establish
- // the connection, the duplex setting should HALF duplex.
- //
- AdapterInfo->Duplex = HALF_DUPLEX;
-
- if (PhyId == PHY_NSC_TX) {
- //
- // Read register 25 to get the SPEED_10 bit
- //
- MdiRead (
- AdapterInfo,
- NSC_SPEED_IND_REG,
- AdapterInfo->PhyAddress,
- &MdiMiscReg
- );
-
- //
- // If bit 6 was set then we're at 10mb
- //
- if (MdiMiscReg & NSC_TX_SPD_INDC_SPEED) {
- AdapterInfo->LinkSpeed = 10;
- } else {
- AdapterInfo->LinkSpeed = 100;
- }
- }
-
- //
- // If we don't know what line speed we are set at, then we'll default to
- // 10mbs
- //
- else {
- AdapterInfo->LinkSpeed = 10;
- }
-}
-
-VOID
-XmitWaitForCompletion (
- NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- TxCB *TxPtr;
-
- if (AdapterInfo->FreeCBCount == AdapterInfo->TxBufCnt) {
- return ;
- }
-
- //
- // used xmit cb list starts right after the free tail (ends before the
- // free head ptr)
- //
- TxPtr = AdapterInfo->FreeTxTailPtr->NextTCBVirtualLinkPtr;
- while (TxPtr != AdapterInfo->FreeTxHeadPtr) {
- CommandWaitForCompletion (TxPtr, AdapterInfo);
- SetFreeCB (AdapterInfo, TxPtr);
- TxPtr = TxPtr->NextTCBVirtualLinkPtr;
- }
-}
-
-INT8
-CommandWaitForCompletion (
- TxCB *cmd_ptr,
- NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- cmd_ptr - TODO: add argument description
- AdapterInfo - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- INT16 wait;
- wait = 5000;
- while ((cmd_ptr->cb_header.status == 0) && (--wait > 0)) {
- DelayIt (AdapterInfo, 10);
- }
-
- if (cmd_ptr->cb_header.status == 0) {
- return -1;
- }
-
- return 0;
-}
-
-STATIC
-INT8
-SoftwareReset (
- NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- UINT8 tco_stat;
- UINT16 wait;
-
- tco_stat = 0;
-
- //
- // Reset the chip: stop Tx and Rx processes and clear counters.
- // This takes less than 10usec and will easily finish before the next
- // action.
- //
-
- OutLong (AdapterInfo, PORT_RESET, AdapterInfo->ioaddr + SCBPort);
- //
- // wait for 5 milli seconds here!
- //
- DelayIt (AdapterInfo, 5000);
- //
- // TCO Errata work around for 559s only
- // -----------------------------------------------------------------------------------
- // TCO Workaround Code
- // haifa workaround
- // -----------------------------------------------------------------------------------
- // 1. Issue SW-RST ^^^ (already done above)
- // 2. Issue a redundant Set CU Base CMD immediately
- // Do not set the General Pointer before the Set CU Base cycle
- // Do not check the SCB CMD before the Set CU Base cycle
- // 3. Wait for the SCB-CMD to be cleared
- // this indicates the transition to post-driver
- // 4. Poll the TCO-Req bit in the PMDR to be cleared
- // this indicates the tco activity has stopped for real
- // 5. Proceed with the nominal Driver Init:
- // Actual Set CU & RU Base ...
- //
- // Check for ICH2 device ID. If this is an ICH2,
- // do the TCO workaround code.
- //
- if (AdapterInfo->VendorID == D102_DEVICE_ID ||
- AdapterInfo->VendorID == ICH3_DEVICE_ID_1 ||
- AdapterInfo->VendorID == ICH3_DEVICE_ID_2 ||
- AdapterInfo->VendorID == ICH3_DEVICE_ID_3 ||
- AdapterInfo->VendorID == ICH3_DEVICE_ID_4 ||
- AdapterInfo->VendorID == ICH3_DEVICE_ID_5 ||
- AdapterInfo->VendorID == ICH3_DEVICE_ID_6 ||
- AdapterInfo->VendorID == ICH3_DEVICE_ID_7 ||
- AdapterInfo->VendorID == ICH3_DEVICE_ID_8 ||
- AdapterInfo->RevID >= 8) { // do the TCO fix
- //
- // donot load the scb pointer but just give load_cu cmd.
- //
- OutByte (AdapterInfo, CU_CMD_BASE, AdapterInfo->ioaddr + SCBCmd);
- //
- // wait for command to be accepted.
- //
- wait_for_cmd_done (AdapterInfo->ioaddr + SCBCmd);
- //
- // read PMDR register and check bit 1 in it to see if TCO is active
- //
-
- //
- // wait for 5 milli seconds
- //
- wait = 5000;
- while (wait) {
- tco_stat = InByte (AdapterInfo, AdapterInfo->ioaddr + 0x1b);
- if ((tco_stat & 2) == 0) {
- //
- // is the activity bit clear??
- //
- break;
- }
-
- wait--;
- DelayIt (AdapterInfo, 1);
- }
-
- if ((tco_stat & 2) != 0) {
- //
- // not zero??
- //
- return -1;
- }
- }
-
- return 0;
-}
-
-UINT8
-SelectiveReset (
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- UINT16 wait;
- UINT32 stat;
-
- wait = 10;
- stat = 0;
- OutLong (AdapterInfo, POR_SELECTIVE_RESET, AdapterInfo->ioaddr + SCBPort);
- //
- // wait for this to complete
- //
-
- //
- // wait for 2 milli seconds here!
- //
- DelayIt (AdapterInfo, 2000);
- while (wait > 0) {
- wait--;
- stat = InLong (AdapterInfo, AdapterInfo->ioaddr + SCBPort);
- if (stat == 0) {
- break;
- }
-
- //
- // wait for 1 milli second
- //
- DelayIt (AdapterInfo, 1000);
- }
-
- if (stat != 0) {
- return PXE_STATCODE_DEVICE_FAILURE;
- }
-
- return 0;
-}
-
-UINT16
-InitializeChip (
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- AdapterInfo - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- UINT16 ret_val;
- if (SoftwareReset (AdapterInfo) != 0) {
- return PXE_STATCODE_DEVICE_FAILURE;
- }
-
- //
- // disable interrupts
- //
- OutWord (AdapterInfo, INT_MASK, AdapterInfo->ioaddr + SCBCmd);
-
- //
- // Load the base registers with 0s (we will give the complete address as
- // offset later when we issue any command
- //
- if ((ret_val = Load_Base_Regs (AdapterInfo)) != 0) {
- return ret_val;
- }
-
- if ((ret_val = SetupCBlink (AdapterInfo)) != 0) {
- return ret_val;
- }
-
- if ((ret_val = SetupReceiveQueues (AdapterInfo)) != 0) {
- return ret_val;
- }
-
- //
- // detect the PHY only if we need to detect the cable as requested by the
- // initialize parameters
- //
- AdapterInfo->PhyAddress = 0xFF;
-
- if (AdapterInfo->CableDetect != 0) {
- if (!PhyDetect (AdapterInfo)) {
- return PXE_STATCODE_DEVICE_FAILURE;
- }
- }
-
- if ((ret_val = E100bSetupIAAddr (AdapterInfo)) != 0) {
- return ret_val;
- }
-
- if ((ret_val = Configure (AdapterInfo)) != 0) {
- return ret_val;
- }
-
- return 0;
-}
|