ArmPlatformPkg/ArmVExpressDxe: Load FDT into the EFI Configuration Table

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>



git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16937 6f19259b-4bc3-4df7-8a09-765794883524

2 files changed, 0 insertions, 325 deletions

diff --git a/EmbeddedPkg/Library/FdtLoadLib/FdtConfigurationTable.c b/EmbeddedPkg/Library/FdtLoadLib/FdtConfigurationTable.c
deleted file mode 100644
index a95e24958b..0000000000
--- a/EmbeddedPkg/Library/FdtLoadLib/FdtConfigurationTable.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/** @file

-*

-*  Copyright (c) 2014, ARM Limited. All rights reserved.

-*

-*  This program and the accompanying materials

-*  are licensed and made available under the terms and conditions of the BSD License

-*  which accompanies this distribution.  The full text of the license may be found at

-*  http://opensource.org/licenses/bsd-license.php

-*

-*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

-*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

-*

-**/

-

-#include <PiDxe.h>

-#include <Library/DebugLib.h>

-#include <Library/FdtLoadLib.h>

-#include <Library/MemoryAllocationLib.h>

-#include <Library/UefiBootServicesTableLib.h>

-

-#include <Protocol/DevicePath.h>

-#include <Protocol/FirmwareVolume2.h>

-#include <Protocol/SimpleFileSystem.h>

-

-#include <Guid/Fdt.h>

-#include <Guid/FileInfo.h>

-

-#include <libfdt.h>

-

-//

-// Device path for SemiHosting

-//

-STATIC CONST struct {

-  VENDOR_DEVICE_PATH        Guid;

-  EFI_DEVICE_PATH_PROTOCOL  End;

-} mSemihostingDevicePath = {

-  {

-    { HARDWARE_DEVICE_PATH, HW_VENDOR_DP, { sizeof (VENDOR_DEVICE_PATH), 0 } },

-    { 0xC5B9C74A, 0x6D72, 0x4719, { 0x99, 0xAB, 0xC5, 0x9F, 0x19, 0x90, 0x91, 0xEB } }

-  },

-  { END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE, { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 } }

-};

-

-

-/**

-  This function declares the passed FDT into the UEFI Configuration Table

-

-  @param FdtBlob    Base address of the Fdt Blob in System Memory

-  @param FdtSize    Size of the Fdt Blob in System Memory

-

-  @return EFI_SUCCESS           Fdt Blob was successfully installed into the configuration table

-  @return !EFI_SUCCESS          Error returned by BS.InstallConfigurationTable()

-

-**/

-STATIC

-EFI_STATUS

-InstallFdtIntoConfigurationTable (

-  IN VOID* FdtBlob,

-  IN UINTN FdtSize

-  )

-{

-  EFI_STATUS Status;

-

-  // Check the FDT header is valid. We only make this check in DEBUG mode in case the FDT header change on

-  // production device and this ASSERT() becomes not valid.

-  ASSERT (fdt_check_header (FdtBlob) == 0);

-

-  // Ensure the Size of the Device Tree is smaller than the size of the read file

-  ASSERT ((UINTN)fdt_totalsize (FdtBlob) <= FdtSize);

-

-  // Install the FDT into the Configuration Table

-  Status = gBS->InstallConfigurationTable (&gFdtTableGuid, FdtBlob);

-

-  return Status;

-}

-

-

-/**

-  Load and Install FDT from Semihosting

-

-  @param Filename   Name of the file to load from semihosting

-

-  @return EFI_SUCCESS           Fdt Blob was successfully installed into the configuration table

-                                from semihosting

-  @return EFI_NOT_FOUND         Fail to locate the file in semihosting

-  @return EFI_OUT_OF_RESOURCES  Fail to allocate memory to contain the blob

-**/

-EFI_STATUS

-InstallFdtFromSemihosting (

-  IN  CONST CHAR16*   FileName

-  )

-{

-  EFI_STATUS                       Status;

-  EFI_DEVICE_PATH*                 Remaining;

-  EFI_HANDLE                       Handle;

-  EFI_SIMPLE_FILE_SYSTEM_PROTOCOL *SemihostingFs;

-  EFI_FILE_PROTOCOL               *Fs;

-  EFI_FILE_PROTOCOL               *File;

-  EFI_PHYSICAL_ADDRESS             FdtBase;

-  EFI_FILE_INFO                   *FileInfo;

-  UINTN                            FdtSize;

-  UINTN                            FileInfoSize;

-

-  // Ensure the Semihosting driver is initialized

-  Remaining = (EFI_DEVICE_PATH*)&mSemihostingDevicePath;

-  // The LocateDevicePath() function locates all devices on DevicePath that support Protocol and returns

-  // the handle to the device that is closest to DevicePath. On output, the device path pointer is modified

-  // to point to the remaining part of the device path

-  Status = gBS->LocateDevicePath (&gEfiDevicePathProtocolGuid, &Remaining, &Handle);

-  if (EFI_ERROR (Status)) {

-    ASSERT_EFI_ERROR (Status);

-    return Status;

-  }

-

-  // Recursive = FALSE: We do not want to start the whole device tree

-  Status = gBS->ConnectController (Handle, NULL, Remaining, FALSE);

-  if (EFI_ERROR (Status)) {

-    return Status;

-  }

-

-  // Locate the FileSystem

-  Status = gBS->HandleProtocol (Handle, &gEfiSimpleFileSystemProtocolGuid, (VOID **)&SemihostingFs);

-  if (EFI_ERROR (Status)) {

-    ASSERT_EFI_ERROR (Status);

-    return Status;

-  }

-

-  // Try to Open the volume and get root directory

-  Status = SemihostingFs->OpenVolume (SemihostingFs, &Fs);

-  if (EFI_ERROR (Status)) {

-    DEBUG ((EFI_D_WARN, "Warning: Fail to open semihosting filesystem that should contain FDT file.\n"));

-    return Status;

-  }

-

-  File = NULL;

-  Status = Fs->Open (Fs, &File, (CHAR16*)FileName, EFI_FILE_MODE_READ, 0);

-  if (EFI_ERROR (Status)) {

-    DEBUG ((EFI_D_WARN, "Warning: Fail to load FDT file '%s'.\n", FileName));

-    Fs->Close (Fs);

-    return Status;

-  }

-

-  FileInfoSize = 0;

-  File->GetInfo (File, &gEfiFileInfoGuid, &FileInfoSize, NULL);

-  FileInfo = AllocatePool (FileInfoSize);

-  if (FileInfo == NULL) {

-    Status = EFI_OUT_OF_RESOURCES;

-    goto CLOSE_FILES;

-  }

-  Status = File->GetInfo (File, &gEfiFileInfoGuid, &FileInfoSize, FileInfo);

-  if (EFI_ERROR (Status)) {

-    FreePool (FileInfo);

-    goto CLOSE_FILES;

-  }

-

-  // Get the file size

-  FdtSize = FileInfo->FileSize;

-  FreePool (FileInfo);

-

-  // The FDT blob is attached to the Configuration Table. It is recommended to load it as Runtime Service Data

-  // to prevent the kernel to overwrite its data

-  Status = gBS->AllocatePages (AllocateAnyPages, EfiRuntimeServicesData, EFI_SIZE_TO_PAGES (FdtSize), &FdtBase);

-  if (!EFI_ERROR (Status)) {

-    Status = File->Read (File, &FdtSize, (VOID*)(UINTN)(FdtBase));

-    if (EFI_ERROR (Status)) {

-      gBS->FreePages (FdtBase, EFI_SIZE_TO_PAGES (FdtSize));

-    } else {

-      // Install the FDT as part of the UEFI Configuration Table

-      Status = InstallFdtIntoConfigurationTable ((VOID*)(UINTN)FdtBase, FdtSize);

-      if (EFI_ERROR (Status)) {

-        gBS->FreePages (FdtBase, EFI_SIZE_TO_PAGES (FdtSize));

-      }

-    }

-  }

-

-CLOSE_FILES:

-  File->Close (File);

-  Fs->Close (Fs);

-  return Status;

-}

-

-/**

-  Load and Install FDT from Firmware Volume

-

-  @param Filename   Guid of the FDT blob to load from firmware volume

-

-  @return EFI_SUCCESS           Fdt Blob was successfully installed into the configuration table

-                                from firmware volume

-  @return EFI_NOT_FOUND         Fail to locate the file in firmware volume

-  @return EFI_OUT_OF_RESOURCES  Fail to allocate memory to contain the blob

-**/

-EFI_STATUS

-InstallFdtFromFv (

-  IN  CONST EFI_GUID *FileName

-  )

-{

-  EFI_STATUS                    Status;

-  EFI_HANDLE                    *HandleBuffer;

-  UINTN                         NumberOfHandles;

-  UINT32                        FvStatus;

-  UINTN                         Index;

-  EFI_FIRMWARE_VOLUME2_PROTOCOL *FvInstance;

-  INTN                          SectionInstance;

-  UINTN                         FdtSize;

-  VOID*                         FdtBlob;

-  EFI_PHYSICAL_ADDRESS          FdtBase;

-

-  FvStatus        = 0;

-  SectionInstance = 0;

-

-  // Locate all the Firmware Volume protocols.

-  Status = gBS->LocateHandleBuffer (

-                   ByProtocol,

-                   &gEfiFirmwareVolume2ProtocolGuid,

-                   NULL,

-                   &NumberOfHandles,

-                   &HandleBuffer

-                   );

-  if (EFI_ERROR (Status)) {

-    return Status;

-  }

-

-  // Looking for FV that contains the FDT blob

-  for (Index = 0; Index < NumberOfHandles; Index++) {

-    //

-    // Get the protocol on this handle

-    // This should not fail because of LocateHandleBuffer

-    //

-    Status = gBS->HandleProtocol (

-                     HandleBuffer[Index],

-                     &gEfiFirmwareVolume2ProtocolGuid,

-                     (VOID**) &FvInstance

-                     );

-    if (EFI_ERROR (Status)) {

-      goto FREE_HANDLE_BUFFER;

-    }

-

-    while (Status == EFI_SUCCESS) {

-      // FdtBlob must be allocated by ReadSection

-      FdtBlob = NULL;

-

-      // See if it contains the FDT file

-      Status = FvInstance->ReadSection (

-                        FvInstance,

-                        FileName,

-                        EFI_SECTION_RAW,

-                        SectionInstance,

-                        &FdtBlob,

-                        &FdtSize,

-                        &FvStatus

-                        );

-      if (!EFI_ERROR (Status)) {

-        // When the FDT blob is attached to the Configuration Table it is recommended to load it as Runtime Service Data

-        // to prevent the kernel to overwrite its data

-        Status = gBS->AllocatePages (AllocateAnyPages, EfiRuntimeServicesData, EFI_SIZE_TO_PAGES (FdtSize), &FdtBase);

-        if (EFI_ERROR (Status)) {

-          goto FREE_HANDLE_BUFFER;

-        }

-

-        // Copy the FDT to the Runtime memory

-        gBS->CopyMem ((VOID*)(UINTN)FdtBase, FdtBlob, FdtSize);

-        // Free the buffer allocated by FvInstance->ReadSection()

-        gBS->FreePool (FdtBlob);

-

-        // Install the FDT as part of the UEFI Configuration Table

-        Status = InstallFdtIntoConfigurationTable ((VOID*)(UINTN)FdtBase, FdtSize);

-        if (EFI_ERROR (Status)) {

-          gBS->FreePages (FdtBase, EFI_SIZE_TO_PAGES (FdtSize));

-        }

-        break;

-      }

-    }

-  }

-

-FREE_HANDLE_BUFFER:

-  // Free any allocated buffers

-  gBS->FreePool (HandleBuffer);

-

-  return Status;

-}

diff --git a/EmbeddedPkg/Library/FdtLoadLib/FdtLoadLib.inf b/EmbeddedPkg/Library/FdtLoadLib/FdtLoadLib.inf
deleted file mode 100644
index a50aa3607a..0000000000
--- a/EmbeddedPkg/Library/FdtLoadLib/FdtLoadLib.inf
+++ /dev/null
@@ -1,45 +0,0 @@
-#/* @file

-#  Copyright (c) 2014, Linaro Limited. All rights reserved.

-#

-#  This program and the accompanying materials

-#  are licensed and made available under the terms and conditions of the BSD License

-#  which accompanies this distribution.  The full text of the license may be found at

-#  http://opensource.org/licenses/bsd-license.php

-#

-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

-#

-#*/

-

-[Defines]

-  INF_VERSION                    = 0x00010005

-  BASE_NAME                      = FdtLoadLib

-  FILE_GUID                      = F00298C1-BBC3-445F-8906-AAEAFE7729A4

-  MODULE_TYPE                    = BASE

-  VERSION_STRING                 = 1.0

-  LIBRARY_CLASS                  = FdtLoadLib

-

-#

-# The following information is for reference only and not required by the build tools.

-#

-#  VALID_ARCHITECTURES           = ARM AARCH64

-#

-

-[Sources]

-  FdtConfigurationTable.c

-

-[Packages]

-  MdePkg/MdePkg.dec

-  EmbeddedPkg/EmbeddedPkg.dec

-

-[LibraryClasses]

-  FdtLib

-

-[Protocols]

-  gEfiDevicePathProtocolGuid

-  gEfiSimpleFileSystemProtocolGuid

-  gEfiFirmwareVolume2ProtocolGuid

-

-[Guids]

-  gEfiFileInfoGuid

-  gFdtTableGuid