summaryrefslogtreecommitdiff
path: root/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyBlock.c
diff options
context:
space:
mode:
authorrsun3 <rsun3@6f19259b-4bc3-4df7-8a09-765794883524>2009-07-01 05:48:44 +0000
committerrsun3 <rsun3@6f19259b-4bc3-4df7-8a09-765794883524>2009-07-01 05:48:44 +0000
commitd6321d6ef9a37eae0d257143b5f4e1809e8a3d6b (patch)
treea2566bc8b7c073bd77d1996aeb90da2c29028b2d /IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyBlock.c
parentb63f669a8ab185aca67efe2a7ddb6fe6745ad14a (diff)
downloadedk2-platforms-d6321d6ef9a37eae0d257143b5f4e1809e8a3d6b.tar.xz
Isa Floppy driver code scrub.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8697 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyBlock.c')
-rw-r--r--IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyBlock.c210
1 files changed, 93 insertions, 117 deletions
diff --git a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyBlock.c b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyBlock.c
index 5f4a990357..b823034bc5 100644
--- a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyBlock.c
+++ b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyBlock.c
@@ -1,15 +1,7 @@
-/**@file
- ISA Floppy Driver
- 1. Support two types diskette drive
- 1.44M drive and 2.88M drive (and now only support 1.44M)
- 2. Support two diskette drives
- 3. Use DMA channel 2 to transfer data
- 4. Do not use interrupt
- 5. Support diskette change line signal and write protect
+/** @file
+ Implementation of the EFI Block IO Protocol for ISA Floppy driver
- Implement the Block IO interface
-
-Copyright (c) 2006 - 2007, Intel Corporation.<BR>
+Copyright (c) 2006 - 2009, Intel Corporation.<BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -20,20 +12,17 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
-
#include "IsaFloppy.h"
/**
- Reset the Floppy Logic Drive, call the FddReset function
-
- @param This EFI_BLOCK_IO *: A pointer to the Block I/O protocol interface
- @param ExtendedVerification BOOLEAN: Indicate that the driver may perform a more
- exhaustive verification operation of the device during
- reset, now this par is ignored in this driver
- @retval EFI_SUCCESS: The Floppy Logic Drive is reset
- @retval EFI_DEVICE_ERROR: The Floppy Logic Drive is not functioning correctly
- and can not be reset
+ Reset the Block Device.
+
+ @param This Indicates a pointer to the calling context.
+ @param ExtendedVerification Driver may perform diagnostics on reset.
+ @retval EFI_SUCCESS The device was reset.
+ @retval EFI_DEVICE_ERROR The device is not functioning properly and could
+ not be reset.
**/
EFI_STATUS
EFIAPI
@@ -59,10 +48,13 @@ FdcReset (
}
/**
- Flush block via fdd controller
-
- @param This EFI_BLOCK_IO *: A pointer to the Block I/O protocol interface
- @return EFI_SUCCESS
+ Flush the Block Device.
+
+ @param This Indicates a pointer to the calling context.
+
+ @retval EFI_SUCCESS All outstanding data was written to the device
+ @retval EFI_DEVICE_ERROR The device reported an error while writting back the data
+ @retval EFI_NO_MEDIA There is no media in the device.
**/
EFI_STATUS
@@ -78,10 +70,10 @@ FddFlushBlocks (
}
/**
- Common report status code interface
+ Common report status code interface.
@param This Pointer of FDC_BLK_IO_DEV instance
- @param Read Error type: read or write?
+ @param Read Read or write operation when error occurrs
**/
VOID
FddReportStatus (
@@ -101,23 +93,22 @@ FddReportStatus (
}
/**
- Read the requested number of blocks from the device
-
- @param This EFI_BLOCK_IO *: A pointer to the Block I/O protocol interface
- @param MediaId UINT32: The media id that the read request is for
- @param LBA EFI_LBA: The starting logic block address to read from on the device
- @param BufferSize UINTN: The size of the Buffer in bytes
- @param Buffer VOID *: A pointer to the destination buffer for the data
-
- @retval EFI_SUCCESS: The data was read correctly from the device
- @retval EFI_DEVICE_ERROR:The device reported an error while attempting to perform
- the read operation
- @retval EFI_NO_MEDIA: There is no media in the device
- @retval EFI_MEDIA_CHANGED: The MediaId is not for the current media
- @retval EFI_BAD_BUFFER_SIZE: The BufferSize parameter is not a multiple of the
- intrinsic block size of the device
- @retval EFI_INVALID_PARAMETER:The read request contains LBAs that are not valid,
- or the buffer is not on proper alignment
+ Read BufferSize bytes from Lba into Buffer.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId Id of the media, changes every time the media is replaced.
+ @param Lba The starting Logical Block Address to read from
+ @param BufferSize Size of Buffer, must be a multiple of device block size.
+ @param Buffer A pointer to the destination buffer for the data. The caller is
+ responsible for either having implicit or explicit ownership of the buffer.
+
+ @retval EFI_SUCCESS The data was read correctly from the device.
+ @retval EFI_DEVICE_ERROR The device reported an error while performing the read.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
+ @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
+ or the buffer is not on proper alignment.
**/
EFI_STATUS
@@ -125,14 +116,14 @@ EFIAPI
FddReadBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
- IN EFI_LBA LBA,
+ IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
)
{
EFI_STATUS Status;
- Status = FddReadWriteBlocks (This, MediaId, LBA, BufferSize, READ, Buffer);
+ Status = FddReadWriteBlocks (This, MediaId, Lba, BufferSize, READ, Buffer);
if (EFI_ERROR (Status)) {
FddReportStatus (This, TRUE);
@@ -142,38 +133,38 @@ FddReadBlocks (
}
/**
- Write a specified number of blocks to the device
-
- @param This EFI_BLOCK_IO *: A pointer to the Block I/O protocol interface
- @param MediaId UINT32: The media id that the write request is for
- @param LBA EFI_LBA: The starting logic block address to be written
- @param BufferSize UINTN: The size in bytes in Buffer
- @param Buffer VOID *: A pointer to the source buffer for the data
-
- @retval EFI_SUCCESS: The data were written correctly to the device
- @retval EFI_WRITE_PROTECTED: The device can not be written to
- @retval EFI_NO_MEDIA: There is no media in the device
- @retval EFI_MEDIA_CHANGED: The MediaId is not for the current media
- @retval EFI_DEVICE_ERROR: The device reported an error while attempting to perform
- the write operation
- @retval EFI_BAD_BUFFER_SIZE: The BufferSize parameter is not a multiple of the
- intrinsic block size of the device
- @retval EFI_INVALID_PARAMETER:The write request contains LBAs that are not valid,
- or the buffer is not on proper alignment
+ Write BufferSize bytes from Lba into Buffer.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId The media ID that the write request is for.
+ @param Lba The starting logical block address to be written. The caller is
+ responsible for writing to only legitimate locations.
+ @param BufferSize Size of Buffer, must be a multiple of device block size.
+ @param Buffer A pointer to the source buffer for the data.
+
+ @retval EFI_SUCCESS The data was written correctly to the device.
+ @retval EFI_WRITE_PROTECTED The device can not be written to.
+ @retval EFI_DEVICE_ERROR The device reported an error while performing the write.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
+ @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
+ @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
+ or the buffer is not on proper alignment.
+
**/
EFI_STATUS
EFIAPI
FddWriteBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
- IN EFI_LBA LBA,
+ IN EFI_LBA Lba,
IN UINTN BufferSize,
IN VOID *Buffer
)
{
EFI_STATUS Status;
- Status = FddReadWriteBlocks (This, MediaId, LBA, BufferSize, WRITE, Buffer);
+ Status = FddReadWriteBlocks (This, MediaId, Lba, BufferSize, WRITE, Buffer);
if (EFI_ERROR (Status)) {
FddReportStatus (This, FALSE);
@@ -183,36 +174,31 @@ FddWriteBlocks (
}
/**
- Read or Write a number of blocks to floppy device
-
- @param This Pointer to instance of EFI_BLOCK_IO_PROTOCOL
- @param MediaId The media id of read/write request
- @param LBA The starting logic block address to read from on the device
- @param BufferSize The size of the Buffer in bytes
- @param Operation - GC_TODO: add argument description
- @param Buffer - GC_TODO: add argument description
-
- @retval EFI_INVALID_PARAMETER - GC_TODO: Add description for return value
- @retval EFI_SUCCESS - GC_TODO: Add description for return value
- @retval EFI_DEVICE_ERROR - GC_TODO: Add description for return value
- @retval EFI_DEVICE_ERROR - GC_TODO: Add description for return value
- @retval EFI_NO_MEDIA - GC_TODO: Add description for return value
- @retval EFI_MEDIA_CHANGED - GC_TODO: Add description for return value
- @retval EFI_WRITE_PROTECTED - GC_TODO: Add description for return value
- @retval EFI_BAD_BUFFER_SIZE - GC_TODO: Add description for return value
- @retval EFI_INVALID_PARAMETER - GC_TODO: Add description for return value
- @retval EFI_INVALID_PARAMETER - GC_TODO: Add description for return value
- @retval EFI_SUCCESS - GC_TODO: Add description for return value
- @retval EFI_DEVICE_ERROR - GC_TODO: Add description for return value
- @retval EFI_DEVICE_ERROR - GC_TODO: Add description for return value
- @retval EFI_SUCCESS - GC_TODO: Add description for return value
+ Read or Write a number of blocks to floppy disk
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId Id of the media, changes every time the media is replaced.
+ @param Lba The starting Logical Block Address to read from
+ @param BufferSize Size of Buffer, must be a multiple of device block size.
+ @param Operation Specifies the read or write operation.
+ @param Buffer A pointer to the destination buffer for the data. The caller is
+ responsible for either having implicit or explicit ownership of the buffer.
+
+ @retval EFI_SUCCESS The data was read correctly from the device.
+ @retval EFI_DEVICE_ERROR The device reported an error while performing the read.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
+ @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
+ or the buffer is not on proper alignment.
+ @retval EFI_WRITE_PROTECTED The device can not be written to.
**/
EFI_STATUS
FddReadWriteBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
- IN EFI_LBA LBA,
+ IN EFI_LBA Lba,
IN UINTN BufferSize,
IN BOOLEAN Operation,
OUT VOID *Buffer
@@ -224,10 +210,7 @@ FddReadWriteBlocks (
UINTN NumberOfBlocks;
UINTN BlockCount;
EFI_STATUS Status;
- //
- // EFI_STATUS CacheStatus;
- //
- EFI_LBA LBA0;
+ EFI_LBA Lba0;
UINT8 *Pointer;
//
@@ -238,7 +221,7 @@ FddReadWriteBlocks (
FdcDev = FDD_BLK_IO_FROM_THIS (This);
if (Operation == WRITE) {
- if (LBA == 0) {
+ if (Lba == 0) {
FdcFreeCache (FdcDev);
}
}
@@ -274,13 +257,6 @@ FddReadWriteBlocks (
if (!(Media->MediaPresent)) {
MotorOff (FdcDev);
FdcFreeCache (FdcDev);
-
- /*
- if (FdcDev->Cache) {
- gBS->FreePool (FdcDev->Cache);
- FdcDev->Cache = NULL;
- }
-*/
return EFI_NO_MEDIA;
}
//
@@ -306,12 +282,12 @@ FddReadWriteBlocks (
return EFI_BAD_BUFFER_SIZE;
}
- if (LBA > Media->LastBlock) {
+ if (Lba > Media->LastBlock) {
MotorOff (FdcDev);
return EFI_INVALID_PARAMETER;
}
- if (((BufferSize / BlockSize) + LBA - 1) > Media->LastBlock) {
+ if (((BufferSize / BlockSize) + Lba - 1) > Media->LastBlock) {
MotorOff (FdcDev);
return EFI_INVALID_PARAMETER;
}
@@ -320,8 +296,8 @@ FddReadWriteBlocks (
//
// See if the data that is being read is already in the cache
//
- if (FdcDev->Cache) {
- if (LBA == 0 && BufferSize == BlockSize) {
+ if (FdcDev->Cache != NULL) {
+ if (Lba == 0 && BufferSize == BlockSize) {
MotorOff (FdcDev);
CopyMem ((UINT8 *) Buffer, (UINT8 *) FdcDev->Cache, BlockSize);
return EFI_SUCCESS;
@@ -338,26 +314,26 @@ FddReadWriteBlocks (
}
NumberOfBlocks = BufferSize / BlockSize;
- LBA0 = LBA;
+ Lba0 = Lba;
Pointer = Buffer;
//
// read blocks in the same cylinder.
// in a cylinder , there are 18 * 2 = 36 blocks
//
- BlockCount = GetTransferBlockCount (FdcDev, LBA, NumberOfBlocks);
+ BlockCount = GetTransferBlockCount (FdcDev, Lba, NumberOfBlocks);
while ((BlockCount != 0) && !EFI_ERROR (Status)) {
- Status = ReadWriteDataSector (FdcDev, Buffer, LBA, BlockCount, Operation);
+ Status = ReadWriteDataSector (FdcDev, Buffer, Lba, BlockCount, Operation);
if (EFI_ERROR (Status)) {
MotorOff (FdcDev);
FddReset (FdcDev);
return EFI_DEVICE_ERROR;
}
- LBA += BlockCount;
+ Lba += BlockCount;
NumberOfBlocks -= BlockCount;
Buffer = (VOID *) ((UINTN) Buffer + BlockCount * BlockSize);
- BlockCount = GetTransferBlockCount (FdcDev, LBA, NumberOfBlocks);
+ BlockCount = GetTransferBlockCount (FdcDev, Lba, NumberOfBlocks);
}
Buffer = Pointer;
@@ -371,7 +347,7 @@ FddReadWriteBlocks (
//
// Cache the data read
//
- if (LBA0 == 0 && !FdcDev->Cache) {
+ if (Lba0 == 0 && FdcDev->Cache == NULL) {
FdcDev->Cache = AllocateCopyPool (BlockSize, Buffer);
}
}
@@ -381,18 +357,18 @@ FddReadWriteBlocks (
}
/**
- Common interface for free cache
+ Free cache for a floppy disk.
- @param FdcDev Pointer of FDC_BLK_IO_DEV instance
+ @param FdcDev A Pointer to FDC_BLK_IO_DEV instance
**/
VOID
FdcFreeCache (
- IN FDC_BLK_IO_DEV *FdcDev
+ IN FDC_BLK_IO_DEV *FdcDev
)
{
- if (FdcDev->Cache) {
- gBS->FreePool (FdcDev->Cache);
+ if (FdcDev->Cache != NULL) {
+ FreePool (FdcDev->Cache);
FdcDev->Cache = NULL;
}
}