tabs were set incorrectly in previous check in

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8709 6f19259b-4bc3-4df7-8a09-765794883524

4 files changed, 511 insertions, 511 deletions

diff --git a/IntelFrameworkPkg/Include/Protocol/LegacyBiosPlatform.h b/IntelFrameworkPkg/Include/Protocol/LegacyBiosPlatform.h
index 005d327f58..4b39f85280 100644
--- a/IntelFrameworkPkg/Include/Protocol/LegacyBiosPlatform.h
+++ b/IntelFrameworkPkg/Include/Protocol/LegacyBiosPlatform.h
@@ -34,376 +34,376 @@
 typedef struct _EFI_LEGACY_BIOS_PLATFORM_PROTOCOL EFI_LEGACY_BIOS_PLATFORM_PROTOCOL;

 

 /**

-	This enum specifies the Mode param values for GetPlatformInfo()

+  This enum specifies the Mode param values for GetPlatformInfo()

 **/

 typedef enum {

-	///

-	/// This mode is invoked twice. The first invocation has LegacySegment and

-	/// LegacyOffset set to 0. The mode returns the MP table address in EFI memory and its size.

-	/// The second invocation has LegacySegment and LegacyOffset set to the location

-	/// in the 0xF0000 or 0xE0000 block to which the MP table is to be copied. The second

-	/// invocation allows any MP table address fix ups to occur in the EFI memory copy of the

-	/// MP table. The caller, not EfiGetPlatformBinaryMpTable, copies the modified MP

-	/// table to the allocated region in 0xF0000 or 0xE0000 block after the second invocation.

-	///

-	/// The function parameters associated with this mode are:

-	///

-	///		Table Pointer to the MP table.

-	///

-	///		TableSize Size in bytes of the MP table.

-	///

-	///		Location Location to place table. 0x00. Either 0xE0000 or 0xF0000 64 KB blocks.

-	///				Bit 0 = 1 0xF0000 64 KB block.

-	///				Bit 1 = 1 0xE0000 64 KB block.

-	///				Multiple bits can be set.

-	///

-	///		Alignment Bit mapped address alignment granularity. 

-	///			The first nonzero bit from the right is the address granularity.

-	///

-	///		LegacySegment Segment where EfiCompatibility code will place the MP table.

-	///

-	///		LegacyOffset Offset where EfiCompatibility code will place the MP table.

-	///

-	///	The return values associated with this mode are:

-	///

-	///		EFI_SUCCESS The MP table was returned.

-	///

-	///		EFI_UNSUPPORTED The MP table is not supported on this platform.

-	///

+  ///

+  /// This mode is invoked twice. The first invocation has LegacySegment and

+  /// LegacyOffset set to 0. The mode returns the MP table address in EFI memory and its size.

+  /// The second invocation has LegacySegment and LegacyOffset set to the location

+  /// in the 0xF0000 or 0xE0000 block to which the MP table is to be copied. The second

+  /// invocation allows any MP table address fix ups to occur in the EFI memory copy of the

+  /// MP table. The caller, not EfiGetPlatformBinaryMpTable, copies the modified MP

+  /// table to the allocated region in 0xF0000 or 0xE0000 block after the second invocation.

+  ///

+  /// The function parameters associated with this mode are:

+  ///

+  ///   Table Pointer to the MP table.

+  ///

+  ///   TableSize Size in bytes of the MP table.

+  ///

+  ///   Location Location to place table. 0x00. Either 0xE0000 or 0xF0000 64 KB blocks.

+  ///     Bit 0 = 1 0xF0000 64 KB block.

+  ///     Bit 1 = 1 0xE0000 64 KB block.

+  ///     Multiple bits can be set.

+  ///

+  ///   Alignment Bit mapped address alignment granularity. 

+  ///     The first nonzero bit from the right is the address granularity.

+  ///

+  //    LegacySegment Segment where EfiCompatibility code will place the MP table.

+  ///

+  ///   LegacyOffset Offset where EfiCompatibility code will place the MP table.

+  ///

+  /// The return values associated with this mode are:

+  ///

+  ///   EFI_SUCCESS The MP table was returned.

+  ///

+  ///   EFI_UNSUPPORTED The MP table is not supported on this platform.

+  ///

   EfiGetPlatformBinaryMpTable      = 0,

-	///

-	/// This mode returns a block of data. The contents and usage is IBV or OEM defined.

-	/// OEMs or IBVs normally use this function for nonstandard Compatibility16 runtime soft

-	/// INTs. It is the responsibility of this routine to coalesce multiple OEM 16 bit functions, if

-	/// they exist, into one coherent package that is understandable by the Compatibility16 code.

-	/// This function is invoked twice. The first invocation has LegacySegment and

-	/// LegacyOffset set to 0. The function returns the table address in EFI memory and its size.

-	/// The second invocation has LegacySegment and LegacyOffset set to the location

-	/// in the 0xF0000 or 0xE0000 block to which the data (table) is to be copied. The second

-	/// invocation allows any data (table) address fix ups to occur in the EFI memory copy of

-	/// the table. The caller, not GetOemIntData(), copies the modified data (table) to the

-	/// allocated region in 0xF0000 or 0xE0000 block after the second invocation.

-	///

-	/// The function parameters associated with this mode are:

-	///

-	///		Table Pointer to OEM legacy 16 bit code or data.

-	///

-	///		TableSize Size of data.

-	///

-	///		Location Location to place table. 0x00. Either 0xE0000 or 0xF0000 64 KB blocks.

-	///				Bit 0 = 1 0xF0000 64 KB block.

-	///				Bit 1 = 1 0xE0000 64 KB block.

-	///				Multiple bits can be set.

-	///

-	///		Alignment Bit mapped address alignment granularity. 

-	///			The first nonzero bit from the right is the address granularity.

-	///

-	///		LegacySegment Segment where EfiCompatibility code will place the table or data.

-	///

-	///		LegacyOffset Offset where EfiCompatibility code will place the table or data.

-	///

-	///	The return values associated with this mode are:

-	///

-	///		EFI_SUCCESS The data was returned successfully.

-	///

-	///		EFI_UNSUPPORTED Oem INT is not supported on this platform.

-	///

+  ///

+  /// This mode returns a block of data. The contents and usage is IBV or OEM defined.

+  /// OEMs or IBVs normally use this function for nonstandard Compatibility16 runtime soft

+  /// INTs. It is the responsibility of this routine to coalesce multiple OEM 16 bit functions, if

+  /// they exist, into one coherent package that is understandable by the Compatibility16 code.

+  /// This function is invoked twice. The first invocation has LegacySegment and

+  /// LegacyOffset set to 0. The function returns the table address in EFI memory and its size.

+  /// The second invocation has LegacySegment and LegacyOffset set to the location

+  /// in the 0xF0000 or 0xE0000 block to which the data (table) is to be copied. The second

+  /// invocation allows any data (table) address fix ups to occur in the EFI memory copy of

+  /// the table. The caller, not GetOemIntData(), copies the modified data (table) to the

+  /// allocated region in 0xF0000 or 0xE0000 block after the second invocation.

+  ///

+  /// The function parameters associated with this mode are:

+  ///

+  ///   Table Pointer to OEM legacy 16 bit code or data.

+  ///

+  ///   TableSize Size of data.

+  ///

+  ///   Location Location to place table. 0x00. Either 0xE0000 or 0xF0000 64 KB blocks.

+  ///       Bit 0 = 1 0xF0000 64 KB block.

+  ///       Bit 1 = 1 0xE0000 64 KB block.

+  ///       Multiple bits can be set.

+  ///

+  ///   Alignment Bit mapped address alignment granularity. 

+  ///     The first nonzero bit from the right is the address granularity.

+  ///

+  ///   LegacySegment Segment where EfiCompatibility code will place the table or data.

+  ///

+  ///   LegacyOffset Offset where EfiCompatibility code will place the table or data.

+  ///

+  /// The return values associated with this mode are:

+  ///

+  ///   EFI_SUCCESS The data was returned successfully.

+  ///

+  ///   EFI_UNSUPPORTED Oem INT is not supported on this platform.

+  ///

   EfiGetPlatformBinaryOemIntData   = 1,

-	///

-	/// This mode returns a block of data. The contents and usage is IBV defined. OEMs or

-	/// IBVs normally use this mode for nonstandard Compatibility16 runtime 16 bit routines. It

-	/// is the responsibility of this routine to coalesce multiple OEM 16 bit functions, if they

-	/// exist, into one coherent package that is understandable by the Compatibility16 code.

-	/// An example usage might be a legacy mobile BIOS that has a pre existing runtime

-	/// interface to return the battery status to calling applications.

-	/// This mode is invoked twice. The first invocation has LegacySegment and

-	/// LegacyOffset set to 0. The mode returns the table address in EFI memory and its size.

-	/// The second invocation has LegacySegment and LegacyOffset set to the location

-	/// in the 0xF0000 or 0xE0000 block to which the table is to be copied. The second

-	/// invocation allows any table address fix ups to occur in the EFI memory copy of the table.

-	/// The caller, not EfiGetPlatformBinaryOem16Data, copies the modified table to

-	/// the allocated region in 0xF0000 or 0xE0000 block after the second invocation.

-	///

-	/// The function parameters associated with this mode are:

-	///

-	///		Table Pointer to OEM legacy 16 bit code or data.

-	///

-	///		TableSize Size of data.

-	///

-	///		Location Location to place the table. 0x00. Either 0xE0000 or 0xF0000 64 KB blocks.

-	///				Bit 0 = 1 0xF0000 64 KB block.

-	///				Bit 1 = 1 0xE0000 64 KB block.

-	///				Multiple bits can be set.

-	///

-	///		Alignment Bit mapped address alignment granularity. 

-	///			The first nonzero bit from the right is the address granularity.

-	///

-	///		LegacySegment Segment where EfiCompatibility code will place the table or data.

-	///

-	///		LegacyOffset Offset where EfiCompatibility code will place the table or data.

-	///

-	///	The return values associated with this mode are:

-	///

-	///		EFI_SUCCESS The data was returned successfully.

-	///

-	///		EFI_UNSUPPORTED Oem16 is not supported on this platform.

-	///

+  ///

+  /// This mode returns a block of data. The contents and usage is IBV defined. OEMs or

+  /// IBVs normally use this mode for nonstandard Compatibility16 runtime 16 bit routines. It

+  /// is the responsibility of this routine to coalesce multiple OEM 16 bit functions, if they

+  /// exist, into one coherent package that is understandable by the Compatibility16 code.

+  /// An example usage might be a legacy mobile BIOS that has a pre existing runtime

+  /// interface to return the battery status to calling applications.

+  /// This mode is invoked twice. The first invocation has LegacySegment and

+  /// LegacyOffset set to 0. The mode returns the table address in EFI memory and its size.

+  /// The second invocation has LegacySegment and LegacyOffset set to the location

+  /// in the 0xF0000 or 0xE0000 block to which the table is to be copied. The second

+  /// invocation allows any table address fix ups to occur in the EFI memory copy of the table.

+  /// The caller, not EfiGetPlatformBinaryOem16Data, copies the modified table to

+  /// the allocated region in 0xF0000 or 0xE0000 block after the second invocation.

+  ///

+  /// The function parameters associated with this mode are:

+  ///

+  ///   Table Pointer to OEM legacy 16 bit code or data.

+  ///

+  ///   TableSize Size of data.

+  ///

+  ///   Location Location to place the table. 0x00. Either 0xE0000 or 0xF0000 64 KB blocks.

+  ///      Bit 0 = 1 0xF0000 64 KB block.

+  ///      Bit 1 = 1 0xE0000 64 KB block.

+  ///      Multiple bits can be set.

+  ///

+  ///   Alignment Bit mapped address alignment granularity. 

+  ///     The first nonzero bit from the right is the address granularity.

+  ///

+  ///   LegacySegment Segment where EfiCompatibility code will place the table or data.

+  ///

+  ///   LegacyOffset Offset where EfiCompatibility code will place the table or data.

+  ///

+  /// The return values associated with this mode are:

+  ///

+  ///   EFI_SUCCESS The data was returned successfully.

+  ///

+  ///   EFI_UNSUPPORTED Oem16 is not supported on this platform.

+  ///

   EfiGetPlatformBinaryOem16Data    = 2,

-	///

-	/// This mode returns a block of data. The contents and usage is IBV defined. OEMs or

-	/// IBVs normally use this mode for nonstandard Compatibility16 runtime 32 bit routines. It

-	/// is the responsibility of this routine to coalesce multiple OEM 32 bit functions, if they

-	/// exist, into one coherent package that is understandable by the Compatibility16 code.

-	/// An example usage might be a legacy mobile BIOS that has a pre existing runtime

-	/// interface to return the battery status to calling applications.

-	/// This mode is invoked twice. The first invocation has LegacySegment and

-	/// LegacyOffset set to 0. The mode returns the table address in EFI memory and its size.

-	/// 

-	/// The second invocation has LegacySegment and LegacyOffset set to the location

-	/// in the 0xF0000 or 0xE0000 block to which the table is to be copied. The second

-	/// invocation allows any table address fix ups to occur in the EFI memory copy of the table.

-	/// The caller, not EfiGetPlatformBinaryOem32Data, copies the modified table to

-	/// the allocated region in 0xF0000 or 0xE0000 block after the second invocation..

-	///

-	/// Note: There are two generic mechanisms by which this mode can be used.

-	///  - Mechanism 1: This mode returns the data and the Legacy BIOS Protocol copies

-	/// the data into the F0000 or E0000 block in the Compatibility16 code. The

-	/// EFI_COMPATIBILITY16_TABLE entries Oem32Segment and Oem32Offset can

-	/// be viewed as two UINT16 entries.

-	/// - Mechanism 2: This mode directly fills in the EFI_COMPATIBILITY16_TABLE with

-	/// a pointer to the INT15 E820 region containing the 32 bit code. It returns

-	/// EFI_UNSUPPORTED. The EFI_COMPATIBILITY16_TABLE entries,

-	/// Oem32Segment and Oem32Offset, can be viewed as two UINT16 entries or

-	/// as a single UINT32 entry as determined by the IBV.

-	///

-	/// The function parameters associated with this mode are:

-	///

-	///		TableSize Size of data.

-	///

-	///		Location Location to place the table. 0x00 – Either 0xE0000 or 0xF0000 64 KB blocks.

-	///				Bit 0 = 1 0xF0000 64 KB block.

-	///				Bit 1 = 1 0xE0000 64 KB block.

-	///				Multiple bits can be set.

-	///

-	///		Alignment Bit mapped address alignment granularity. 

-	///				The first nonzero bit from the right is the address granularity.

-	///

-	///		LegacySegment Segment where EfiCompatibility code will place the table or data.

-	///

-	///		LegacyOffset Offset where EfiCompatibility code will place the table or data.

-	///

-	///	The return values associated with this mode are:

-	///		EFI_SUCCESS The data was returned successfully.

-	///		EFI_UNSUPPORTED Oem32 is not supported on this platform.

-	///

-  EfiGetPlatformBinaryOem32Data    = 3,

-	///

-	/// This mode returns a TPM binary image for the onboard TPM device.

-	///

-	/// The function parameters associated with this mode are:

-	///

-	///		Table TPM binary image for the onboard TPM device.

-	///

-	///		TableSize Size of BinaryImage in bytes.

-	///

-	///		Location Location to place the table. 0x00. Either 0xE0000 or 0xF0000 64 KB blocks.

-	///				Bit 0 = 1 0xF0000 64 KB block.

-	///				Bit 1 = 1 0xE0000 64 KB block.

-	///				Multiple bits can be set.

-	///

-	///		Alignment Bit mapped address alignment granularity. 

-	///				The first nonzero bit from the right is the address granularity.

-	///

-	///		LegacySegment Segment where EfiCompatibility code will place the table or data.

-	///

-	///		LegacyOffset Offset where EfiCompatibility code will place the table or data.

-	///

-	///	The return values associated with this mode are:

-	///

-	///		EFI_SUCCESS BinaryImage is valid.

-	///

-	///		EFI_UNSUPPORTED Mode is not supported on this platform.

-	///

-	///		EFI_NOT_FOUND No BinaryImage was found.

-	///

+///

+/// This mode returns a block of data. The contents and usage is IBV defined. OEMs or

+/// IBVs normally use this mode for nonstandard Compatibility16 runtime 32 bit routines. It

+/// is the responsibility of this routine to coalesce multiple OEM 32 bit functions, if they

+/// exist, into one coherent package that is understandable by the Compatibility16 code.

+/// An example usage might be a legacy mobile BIOS that has a pre existing runtime

+/// interface to return the battery status to calling applications.

+/// This mode is invoked twice. The first invocation has LegacySegment and

+/// LegacyOffset set to 0. The mode returns the table address in EFI memory and its size.

+/// 

+/// The second invocation has LegacySegment and LegacyOffset set to the location

+/// in the 0xF0000 or 0xE0000 block to which the table is to be copied. The second

+/// invocation allows any table address fix ups to occur in the EFI memory copy of the table.

+/// The caller, not EfiGetPlatformBinaryOem32Data, copies the modified table to

+/// the allocated region in 0xF0000 or 0xE0000 block after the second invocation..

+///

+/// Note: There are two generic mechanisms by which this mode can be used.

+///  - Mechanism 1: This mode returns the data and the Legacy BIOS Protocol copies

+/// the data into the F0000 or E0000 block in the Compatibility16 code. The

+/// EFI_COMPATIBILITY16_TABLE entries Oem32Segment and Oem32Offset can

+/// be viewed as two UINT16 entries.

+/// - Mechanism 2: This mode directly fills in the EFI_COMPATIBILITY16_TABLE with

+/// a pointer to the INT15 E820 region containing the 32 bit code. It returns

+/// EFI_UNSUPPORTED. The EFI_COMPATIBILITY16_TABLE entries,

+/// Oem32Segment and Oem32Offset, can be viewed as two UINT16 entries or

+/// as a single UINT32 entry as determined by the IBV.

+///

+/// The function parameters associated with this mode are:

+///

+///   TableSize Size of data.

+///

+///   Location Location to place the table. 0x00 – Either 0xE0000 or 0xF0000 64 KB blocks.

+///       Bit 0 = 1 0xF0000 64 KB block.

+///       Bit 1 = 1 0xE0000 64 KB block.

+///       Multiple bits can be set.

+///

+///   Alignment Bit mapped address alignment granularity. 

+///       The first nonzero bit from the right is the address granularity.

+///

+///   LegacySegment Segment where EfiCompatibility code will place the table or data.

+///

+///   LegacyOffset Offset where EfiCompatibility code will place the table or data.

+///

+/// The return values associated with this mode are:

+///   EFI_SUCCESS The data was returned successfully.

+///   EFI_UNSUPPORTED Oem32 is not supported on this platform.

+///

+EfiGetPlatformBinaryOem32Data    = 3,

+  ///

+  /// This mode returns a TPM binary image for the onboard TPM device.

+  ///

+  /// The function parameters associated with this mode are:

+  ///

+  ///   Table TPM binary image for the onboard TPM device.

+  ///

+  ///   TableSize Size of BinaryImage in bytes.

+  ///

+  ///   Location Location to place the table. 0x00. Either 0xE0000 or 0xF0000 64 KB blocks.

+  ///      Bit 0 = 1 0xF0000 64 KB block.

+  ///      Bit 1 = 1 0xE0000 64 KB block.

+  ///      Multiple bits can be set.

+  ///

+  ///   Alignment Bit mapped address alignment granularity. 

+  ///     The first nonzero bit from the right is the address granularity.

+  ///

+  ///   LegacySegment Segment where EfiCompatibility code will place the table or data.

+  ///

+  ///   LegacyOffset Offset where EfiCompatibility code will place the table or data.

+  ///

+  /// The return values associated with this mode are:

+  ///

+  ///   EFI_SUCCESS BinaryImage is valid.

+  ///

+  ///   EFI_UNSUPPORTED Mode is not supported on this platform.

+  ///

+  ///   EFI_NOT_FOUND No BinaryImage was found.

+  ///

   EfiGetPlatformBinaryTpmBinary    = 4,

-	///

-	/// The mode finds the Compatibility16 “ROM” image.

-	///

-	/// The function parameters associated with this mode are:

-	///

-	///		System ROM image for the platform

-	///

-	///		TableSize Size of Table in bytes

-	///

-	///		Location Ignored

-	///

-	///		Alignment Ignored

-	///

-	///		LegacySegment Ignored

-	///

-	///		LegacyOffset Ignored

-	///

-	///	The return values associated with this mode are:

-	///

-	///		EFI_SUCCESS ROM image found.

-	///

-	///		EFI_NOT_FOUND ROM not found.

-	///

+  ///

+  /// The mode finds the Compatibility16 “ROM” image.

+  ///

+  /// The function parameters associated with this mode are:

+  ///

+  ///    System ROM image for the platform

+  ///    

+  ///    TableSize Size of Table in bytes

+  ///    

+  ///    Location Ignored

+  ///    

+  ///    Alignment Ignored

+  ///    

+  ///    LegacySegment Ignored

+  ///    

+  ///    LegacyOffset Ignored

+  ///

+  /// The return values associated with this mode are:

+  ///

+  ///    EFI_SUCCESS ROM image found.

+  ///    

+  ///    EFI_NOT_FOUND ROM not found.

+  ///

   EfiGetPlatformBinarySystemRom    = 5,

-	///

-	/// This mode returns the Base address of PciExpress memory mapped configuration

-	/// address space.

-	///

-	/// The function parameters associated with this mode are:

-	///

-	///		Table System ROM image for the platform

-	///

-	///		TableSize Size of Table in bytes

-	///

-	///		Location Ignored

-	///

-	///		Alignment Ignored

-	///

-	///		LegacySegment Ignored

-	///

-	///		LegacyOffset Ignored

-	///

-	///	The return values associated with this mode are:

-	///

-	///		EFI_SUCCESS Address is valid.

-	///

-	///		EFI_UNSUPPORTED System does not PciExpress.

-	///

+  ///

+  /// This mode returns the Base address of PciExpress memory mapped configuration

+  /// address space.

+  ///

+  /// The function parameters associated with this mode are:

+  ///

+  ///    Table System ROM image for the platform

+  ///    

+  ///    TableSize Size of Table in bytes

+  ///    

+  ///    Location Ignored

+  ///    

+  ///    Alignment Ignored

+  ///    

+  ///    LegacySegment Ignored

+  ///    

+  ///    LegacyOffset Ignored

+  ///

+  /// The return values associated with this mode are:

+  ///

+  ///   EFI_SUCCESS Address is valid.

+  ///

+  ///   EFI_UNSUPPORTED System does not PciExpress.

+  ///

   EfiGetPlatformPciExpressBase     = 6,

-	///

+  ///

   EfiGetPlatformPmmSize            = 7,

-	///

+  ///

   EfiGetPlatformEndOpromShadowAddr = 8,

-	///

+  ///

 } EFI_GET_PLATFORM_INFO_MODE;

 

 /**

-	This enum specifies the Mode param values for GetPlatformHandle()

+  This enum specifies the Mode param values for GetPlatformHandle()

 **/

 typedef enum {

-	///

-	/// This mode returns the Compatibility16 policy for the device that should be the VGA

-	/// controller used during a Compatibility16 boot.

-	///

-	/// The function parameters associated with this mode are:

-	///

-	///		Type 0x00

-	///

-	///		HandleBuffer Buffer of all VGA handles found.

-	///

-	///		HandleCount Number of VGA handles found.

-	///

-	///		AdditionalData NULL

-	/// 

+  ///

+  /// This mode returns the Compatibility16 policy for the device that should be the VGA

+  /// controller used during a Compatibility16 boot.

+  ///

+  /// The function parameters associated with this mode are:

+  ///

+  ///   Type 0x00

+  ///

+  ///   HandleBuffer Buffer of all VGA handles found.

+  ///

+  ///   HandleCount Number of VGA handles found.

+  ///

+  ///   AdditionalData NULL

+  /// 

   EfiGetPlatformVgaHandle       = 0,

-	///

-	/// This mode returns the Compatibility16 policy for the device that should be the IDE

-	/// controller used during a Compatibility16 boot.

-	///

-	/// The function parameters associated with this mode are:

-	///

-	///		Type 0x00

-	///

-	///		HandleBuffer Buffer of all IDE handles found.

-	///

-	///		HandleCount Number of IDE handles found

-	///

-	///		AdditionalData Pointer to HddInfo.

-	///				Information about all onboard IDE controllers.

-	///

+  ///

+  /// This mode returns the Compatibility16 policy for the device that should be the IDE

+  /// controller used during a Compatibility16 boot.

+  ///

+  /// The function parameters associated with this mode are:

+  ///

+  ///   Type 0x00

+  ///

+  ///   HandleBuffer Buffer of all IDE handles found.

+  ///

+  ///   HandleCount Number of IDE handles found

+  ///

+  ///   AdditionalData Pointer to HddInfo.

+  ///     Information about all onboard IDE controllers.

+  ///

   EfiGetPlatformIdeHandle       = 1,

-	///

-	/// This mode returns the Compatibility16 policy for the device that should be the ISA bus

-	/// controller used during a Compatibility16 boot.

-	///

-	/// The function parameters associated with this mode are:

-	///

-	///		Type 0x00

-	///

-	///		HandleBuffer Buffer of all ISA bus handles found.

-	///

-	///		HandleCount Number of ISA bus handles found.

-	///

-	///		AdditionalData NULL

-	///

+  ///

+  /// This mode returns the Compatibility16 policy for the device that should be the ISA bus

+  /// controller used during a Compatibility16 boot.

+  ///

+  /// The function parameters associated with this mode are:

+  ///

+  ///   Type 0x00

+  ///

+  ///   HandleBuffer Buffer of all ISA bus handles found.

+  ///

+  ///   HandleCount Number of ISA bus handles found.

+  ///

+  ///   AdditionalData NULL

+  ///

   EfiGetPlatformIsaBusHandle    = 2,

-	///

-	/// This mode returns the Compatibility16 policy for the device that should be the USB

-	/// device used during a Compatibility16 boot.

-	///

-	/// The function parameters associated with this mode are:

-	///

-	///		Type 0x00

-	///

-	///		HandleBuffer Buffer of all USB handles found.

-	///

-	///		HandleCount Number of USB bus handles found.

-	///

-	///		AdditionalData NULL

-	///

+  ///

+  /// This mode returns the Compatibility16 policy for the device that should be the USB

+  /// device used during a Compatibility16 boot.

+  ///

+  /// The function parameters associated with this mode are:

+  ///

+  ///   Type 0x00

+  ///

+  ///   HandleBuffer Buffer of all USB handles found.

+  ///

+  ///   HandleCount Number of USB bus handles found.

+  ///

+  ///   AdditionalData NULL

+  ///

   EfiGetPlatformUsbHandle       = 3

 } EFI_GET_PLATFORM_HANDLE_MODE;

 

 /**

-	This enum specifies the Mode param values for PlatformHooks()

-	Note: Any OEM defined hooks start with 0x8000

+  This enum specifies the Mode param values for PlatformHooks()

+  Note: Any OEM defined hooks start with 0x8000

 **/

 typedef enum {

-	///

-	/// This mode allows any preprocessing before scanning OpROMs.

-	///

-	/// The function parameters associated with this mode are:

-	///

-	///			Type 0

-	///

-	///			DeviceHandle Handle of device OpROM is associated with. 

-	///

-	///			ShadowAddress Address where OpROM is shadowed.

-	///

-	///			Compatibility16Table NULL

-	///

-	///			AdditionalData NULL

-	///

+  ///

+  /// This mode allows any preprocessing before scanning OpROMs.

+  ///

+  /// The function parameters associated with this mode are:

+  ///

+  ///     Type 0

+  ///

+  ///     DeviceHandle Handle of device OpROM is associated with. 

+  ///

+  ///     ShadowAddress Address where OpROM is shadowed.

+  ///

+  ///     Compatibility16Table NULL

+  ///

+  ///     AdditionalData NULL

+  ///

   EfiPlatformHookPrepareToScanRom = 0,

-	///

-	/// This mode shadows legacy OpROMS that may not have a physical device associated with

-	/// them. It returns EFI_SUCCESS if the ROM was shadowed.

-	///

-	/// The function parameters associated with this mode are:

-	///

-	///  		Type 0

-	///

-	///			DeviceHandle 0

-	///

-	///			ShadowAddress	First free OpROM area, after other OpROMs have been dispatched..

-	///

-	///			Compatibility16Table Pointer to the Compatability16 Table.

-	///

-	/// 			AdditionalData NULL

-	///

+  ///

+  /// This mode shadows legacy OpROMS that may not have a physical device associated with

+  /// them. It returns EFI_SUCCESS if the ROM was shadowed.

+  ///

+  /// The function parameters associated with this mode are:

+  ///

+  ///     Type 0

+  ///

+  ///     DeviceHandle 0

+  ///

+  ///     ShadowAddress First free OpROM area, after other OpROMs have been dispatched..

+  ///

+  ///     Compatibility16Table Pointer to the Compatability16 Table.

+  ///

+  ///       AdditionalData NULL

+  ///

   EfiPlatformHookShadowServiceRoms= 1,

-	///

-	/// This mode allows platform to perform any required operation after an OpROM has

-	/// completed its initialization.

-	///

-	/// The function parameters associated with this mode are:

-	///

-	/// 			Type 0

-	///

-	/// 			DeviceHandle Handle of device OpROM is associated with. 

-	///

-	/// 			ShadowAddress Address where OpROM is shadowed.

-	///

-	/// 			Compatibility16Table NULL

-	///

-	/// 			AdditionalData NULL

-	/// 

+  ///

+  /// This mode allows platform to perform any required operation after an OpROM has

+  /// completed its initialization.

+  ///

+  /// The function parameters associated with this mode are:

+  ///

+  ///       Type 0

+  ///

+  ///       DeviceHandle Handle of device OpROM is associated with. 

+  ///

+  ///       ShadowAddress Address where OpROM is shadowed.

+  ///

+  ///       Compatibility16Table NULL

+  ///

+  ///       AdditionalData NULL

+  /// 

   EfiPlatformHookAfterRomInit     = 2

 } EFI_GET_PLATFORM_HOOK_MODE;

 

@@ -429,21 +429,21 @@ typedef enum {
 //

 //

 typedef struct {

-	///

-	/// IRQ for this entry.

-	///

+  ///

+  /// IRQ for this entry.

+  ///

   UINT8 Irq;

-	///

-	/// Status of this IRQ.

-	///

-	/// PCI_UNUSED 0x00. This IRQ has not been assigned to PCI.

-	///

-	/// PCI_USED 0xFF. This IRQ has been assigned to PCI.

-	///

-	/// LEGACY_USED 0xFE. This IRQ has been used by an SIO legacy

-	/// device and cannot be used by PCI.

-	///

-  UINT8 Used;

+  ///

+  /// Status of this IRQ.

+  ///

+  /// PCI_UNUSED 0x00. This IRQ has not been assigned to PCI.

+  ///

+  /// PCI_USED 0xFF. This IRQ has been assigned to PCI.

+  ///

+  /// LEGACY_USED 0xFE. This IRQ has been used by an SIO legacy

+  /// device and cannot be used by PCI.

+  ///

+UINT8 Used;

 } EFI_LEGACY_IRQ_PRIORITY_TABLE_ENTRY;

 

 //

@@ -452,95 +452,95 @@ typedef struct {
 #define EFI_LEGACY_PIRQ_TABLE_SIGNATURE SIGNATURE_32 ('$', 'P', 'I', 'R')

 

 typedef struct {

-	///

-	/// $PIR.

-	///

+  ///

+  /// $PIR.

+  ///

   UINT32  Signature;

-	///

-	/// 0x00.

-	///

+  ///

+  /// 0x00.

+  ///

   UINT8   MinorVersion;

-	///

-	/// 0x01 for table version 1.0.

-	///

+  ///

+  /// 0x01 for table version 1.0.

+  ///

   UINT8   MajorVersion;

-	///

-	/// 0x20 + RoutingTableEntries * 0x10.

-	///

+  ///

+  /// 0x20 + RoutingTableEntries * 0x10.

+  ///

   UINT16  TableSize;

-	///

-	/// PCI interrupt router bus.

-	///

+  ///

+  /// PCI interrupt router bus.

+  ///

   UINT8   Bus;

-	///

-	/// PCI interrupt router device/function.

-	///

+  ///

+  /// PCI interrupt router device/function.

+  ///

   UINT8   DevFun;

-	///

-	/// If nonzero, bit map of IRQs reserved for PCI.

-	///

+  ///

+  /// If nonzero, bit map of IRQs reserved for PCI.

+  ///

   UINT16  PciOnlyIrq;

-	///

-	/// Vendor ID of a compatible PCI interrupt router.

-	///

+  ///

+  /// Vendor ID of a compatible PCI interrupt router.

+  ///

   UINT16  CompatibleVid;

-	///

-	/// Device ID of a compatible PCI interrupt router.

-	///

+  ///

+  /// Device ID of a compatible PCI interrupt router.

+  ///

   UINT16  CompatibleDid;

-	///

-	/// If nonzero, a value passed directly to the IRQ miniport’s Initialize function.

+  ///

+  /// If nonzero, a value passed directly to the IRQ miniport’s Initialize function.

   ///

   UINT32  Miniport;

-	///

-	/// Reserved for future usage.

-	///

+  ///

+  /// Reserved for future usage.

+  ///

   UINT8   Reserved[11];

-	///

-	/// This byte plus the sum of all other bytes in the LocalPirqTable equal 0x00.

-	///

+  ///

+  /// This byte plus the sum of all other bytes in the LocalPirqTable equal 0x00.

+  ///

   UINT8   Checksum;

 } EFI_LEGACY_PIRQ_TABLE_HEADER;

 

 

 typedef struct {

-	///

-	/// IRQ for this entry.

-	///

+  ///

+  /// IRQ for this entry.

+  ///

   UINT8   Pirq;

-	///

-	/// Status of this IRQ.

-	///

-	/// 		PCI_UNUSED 0x00. This IRQ has not been assigned to PCI.

-	///

-	/// 		PCI_USED 0xFF. This IRQ has been assigned to PCI.

-	///

-	/// 		LEGACY_USED 0xFE. This IRQ has been used by an SIO legacy

-	/// 				device and cannot be used by PCI.

-	///

-  UINT16  IrqMask;

+  ///

+  /// Status of this IRQ.

+  ///

+  ///     PCI_UNUSED 0x00. This IRQ has not been assigned to PCI.

+  ///

+  ///     PCI_USED 0xFF. This IRQ has been assigned to PCI.

+  ///

+  ///     LEGACY_USED 0xFE. This IRQ has been used by an SIO legacy

+  ///       device and cannot be used by PCI.

+  ///

+UINT16  IrqMask;

 } EFI_LEGACY_PIRQ_ENTRY;

 

 typedef struct {

-	///

-	/// PCI bus of the entry.

-	///

+  ///

+  /// PCI bus of the entry.

+  ///

   UINT8                 Bus;

-	///

-	/// PCI device of this entry.

-	///

+  ///

+  /// PCI device of this entry.

+  ///

   UINT8                 Device;

-	///

-	/// An IBV value and IRQ mask for PIRQ pins A through D.

-	///

+  ///

+  /// An IBV value and IRQ mask for PIRQ pins A through D.

+  ///

   EFI_LEGACY_PIRQ_ENTRY PirqEntry[4];

-	///

-	/// If nonzero, the slot number assigned by the board manufacturer.

-	///

+  ///

+  /// If nonzero, the slot number assigned by the board manufacturer.

+  ///

   UINT8                 Slot;

-	///

-	/// Reserved for future use.

-	///

+  ///

+  /// Reserved for future use.

+  ///

   UINT8                 Reserved;

 } EFI_LEGACY_IRQ_ROUTING_ENTRY;

 

@@ -580,9 +580,9 @@ EFI_STATUS
 /**

   Returns a buffer of handles for the requested subfunction.

 

-  @param  This                  	Protocol instance pointer.

+  @param  This                  Protocol instance pointer.

   @param  Mode                  Specifies what handle to return. See EFI_GET_PLATFORM_HANDLE_MODE enum.

-  @param  Type                   Mode specific. See EFI_GET_PLATFORM_HANDLE_MODE enum.

+  @param  Type                  Mode specific. See EFI_GET_PLATFORM_HANDLE_MODE enum.

   @param  HandleBuffer          Mode specific. See EFI_GET_PLATFORM_HANDLE_MODE enum.

   @param  HandleCount           Mode specific. See EFI_GET_PLATFORM_HANDLE_MODE enum.

   @param  AdditionalData        Mode specific. See EFI_GET_PLATFORM_HANDLE_MODE enum.

@@ -622,7 +622,7 @@ EFI_STATUS
 

 /**

   Allows platform to perform any required action after a LegacyBios operation.

-	Invokes the specific sub function specified by Mode.

+  Invokes the specific sub function specified by Mode.

 

   @param  This                  Protocol instance pointer.

   @param  Mode                  Specifies what handle to return. See EFI_GET_PLATFORM_HOOK_MODE enum.

@@ -650,14 +650,14 @@ EFI_STATUS
 

 /**

   Returns information associated with PCI IRQ routing.

-	This function returns the following information associated with PCI IRQ routing:

-		An IRQ routing table and number of entries in the table

-		The $PIR table and its size

-		A list of PCI IRQs and the priority order to assign them

+  This function returns the following information associated with PCI IRQ routing:

+    An IRQ routing table and number of entries in the table

+    The $PIR table and its size

+    A list of PCI IRQs and the priority order to assign them

 

   @param  This                    Protocol instance pointer.

   @param  RoutingTable            Pointer to PCI IRQ Routing table. 

-														This location is the $PIR table minus the header.

+                                  This location is the $PIR table minus the header.

   @param  RoutingTableEntries     Number of entries in table.

   @param  LocalPirqTable          $PIR table

   @param  PirqTableSize           $PIR table size

@@ -681,8 +681,8 @@ EFI_STATUS
 

 /**

   Translates the given PIRQ accounting for bridge

-	This function translates the given PIRQ back through all buses, if required, 

-	and returns the true PIRQ and associated IRQ.

+  This function translates the given PIRQ back through all buses, if required, 

+  and returns the true PIRQ and associated IRQ.

 

   @param  This                  Protocol instance pointer.

   @param  PciBus                PCI bus number for this device.

@@ -735,32 +735,32 @@ EFI_STATUS
   This protocol abstracts the platform portion of the traditional BIOS.

 **/

 struct _EFI_LEGACY_BIOS_PLATFORM_PROTOCOL {

-	///

-  /// Gets binary data or other platform information.

-	///

-  EFI_LEGACY_BIOS_PLATFORM_GET_PLATFORM_INFO    		GetPlatformInfo;

-	///

-	///  Returns a buffer of all handles matching the requested subfunction.

-	///

+  ///

+  ///  Gets binary data or other platform information.

+  ///

+  EFI_LEGACY_BIOS_PLATFORM_GET_PLATFORM_INFO    GetPlatformInfo;

+  ///

+  ///  Returns a buffer of all handles matching the requested subfunction.

+  ///

   EFI_LEGACY_BIOS_PLATFORM_GET_PLATFORM_HANDLE  GetPlatformHandle;

-	///

-	///  Loads and initializes the traditional BIOS SMM handler.

-  EFI_LEGACY_BIOS_PLATFORM_SMM_INIT             						SmmInit;

-	///

-	///   Allows platform to perform any required actions after a LegacyBios operation.

-	///

-  EFI_LEGACY_BIOS_PLATFORM_HOOKS                						PlatformHooks;

-	///

-	/// 	  Gets $PIR table.

-  EFI_LEGACY_BIOS_PLATFORM_GET_ROUTING_TABLE    		GetRoutingTable;

-	/// 

-	/// 	  Translates the given PIRQ to the final value after traversing any PCI bridges.

-	///

-  EFI_LEGACY_BIOS_PLATFORM_TRANSLATE_PIRQ       			TranslatePirq;

-	///

-	///	  Final platform function before the system attempts to boot to a traditional OS.

-	///

-  EFI_LEGACY_BIOS_PLATFORM_PREPARE_TO_BOOT      		PrepareToBoot;

+  ///

+  ///  Loads and initializes the traditional BIOS SMM handler.

+  EFI_LEGACY_BIOS_PLATFORM_SMM_INIT             SmmInit;

+  ///

+  ///  Allows platform to perform any required actions after a LegacyBios operation.

+  ///

+  EFI_LEGACY_BIOS_PLATFORM_HOOKS                PlatformHooks;

+  ///

+  ///  Gets $PIR table.

+  EFI_LEGACY_BIOS_PLATFORM_GET_ROUTING_TABLE    GetRoutingTable;

+  /// 

+  ///  Translates the given PIRQ to the final value after traversing any PCI bridges.

+  ///

+  EFI_LEGACY_BIOS_PLATFORM_TRANSLATE_PIRQ       TranslatePirq;

+  ///

+  ///  Final platform function before the system attempts to boot to a traditional OS.

+  ///

+  EFI_LEGACY_BIOS_PLATFORM_PREPARE_TO_BOOT      PrepareToBoot;

 };

 

 extern EFI_GUID gEfiLegacyBiosPlatformProtocolGuid;

diff --git a/IntelFrameworkPkg/Include/Protocol/PciPlatform.h b/IntelFrameworkPkg/Include/Protocol/PciPlatform.h
index d9c198cc0c..080952dc57 100644
--- a/IntelFrameworkPkg/Include/Protocol/PciPlatform.h
+++ b/IntelFrameworkPkg/Include/Protocol/PciPlatform.h
@@ -98,8 +98,8 @@ typedef enum {
 typedef

 EFI_STATUS

 (EFIAPI *EFI_PCI_PLATFORM_PHASE_NOTIFY)(

-  IN  EFI_PCI_PLATFORM_PROTOCOL                       *This,

-  IN  EFI_HANDLE                                     							HostBridge,

+  IN  EFI_PCI_PLATFORM_PROTOCOL                      *This,

+  IN  EFI_HANDLE                                     HostBridge,

   IN  EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE  Phase,

   IN  EFI_PCI_CHIPSET_EXECUTION_PHASE                ChipsetPhase

 );

@@ -209,23 +209,23 @@ EFI_STATUS
 /// the unique features of a platform.

 ///

 struct _EFI_PCI_PLATFORM_PROTOCOL {

-	///

-	/// The notification from the PCI bus enumerator to the platform that it is about to 

-	/// enter a certain phase during the enumeration process.

-	///

+  ///

+  /// The notification from the PCI bus enumerator to the platform that it is about to 

+  /// enter a certain phase during the enumeration process.

+  ///

   EFI_PCI_PLATFORM_PHASE_NOTIFY          PlatformNotify;

-	///

-	/// The notification from the PCI bus enumerator to the platform for each PCI 

-	/// controller at several predefined points during PCI controller initialization.

-	/// 

+  ///

+  /// The notification from the PCI bus enumerator to the platform for each PCI 

+  /// controller at several predefined points during PCI controller initialization.

+  /// 

   EFI_PCI_PLATFORM_PREPROCESS_CONTROLLER PlatformPrepController;

-	/// 

-	/// Retrieves the platform policy regarding enumeration.

-	///

+  /// 

+  /// Retrieves the platform policy regarding enumeration.

+  ///

   EFI_PCI_PLATFORM_GET_PLATFORM_POLICY   GetPlatformPolicy;

-	///

-	/// Gets the PCI device’s option ROM from a platform-specific location.

-	///

+  ///

+  /// Gets the PCI device’s option ROM from a platform-specific location.

+  ///

   EFI_PCI_PLATFORM_GET_PCI_ROM           GetPciRom;

 };

 

diff --git a/IntelFrameworkPkg/Include/Protocol/SmmControl.h b/IntelFrameworkPkg/Include/Protocol/SmmControl.h
index 725614a34f..1097179b4d 100644
--- a/IntelFrameworkPkg/Include/Protocol/SmmControl.h
+++ b/IntelFrameworkPkg/Include/Protocol/SmmControl.h
@@ -41,15 +41,15 @@ typedef struct _EFI_SMM_CONTROL_PROTOCOL              EFI_SMM_CONTROL_PROTOCOL;
 // SMM Access specification Data Structures

 //

 typedef struct {

-	/// 

-	///  Describes the I/O location of the particular port that engendered the synchronous

-	///  SMI. For example, this location can include but is not limited to the traditional 

-	///  PCAT* APM port of 0B2h.

-	///

+  /// 

+  ///  Describes the I/O location of the particular port that engendered the synchronous

+  ///  SMI. For example, this location can include but is not limited to the traditional 

+  ///  PCAT* APM port of 0B2h.

+  ///

   UINT8 SmiTriggerRegister;

-	///

-	///  Describes the value that was written to the respective activation port.

-	///

+  ///

+  ///  Describes the value that was written to the respective activation port.

+  ///

   UINT8 SmiDataRegister;

 } EFI_SMM_CONTROL_REGISTER;

 

@@ -108,8 +108,8 @@ EFI_STATUS
   @param  SmiRegister           Pointer to the SMI register description structure

 

   @retval EFI_SUCCESS           The register structure has been returned.

-	@retval	EFI_DEVICE_ERROR	 The source could not be cleared.

-	@retval	EFI_INVALID_PARAMETER The service did not support the Periodic input argument.

+  @retval EFI_DEVICE_ERROR      The source could not be cleared.

+  @retval EFI_INVALID_PARAMETER The service did not support the Periodic input argument.

 

 **/

 typedef

@@ -135,20 +135,20 @@ EFI_STATUS
   @param MinimumTriggerPeriod

   Minimum interval at which the platform can set the period.

 

-	@retval	EFI_SUCCESS The register structure has been returned.

+  @retval EFI_SUCCESS The register structure has been returned.

 **/

 

 //

 // SMM Control Protocol

 //

 /**

-	This protocol is used initiate SMI/PMI activations. 

-	This protocol could be published by either of the following:

-		- A processor driver to abstract the SMI/PMI IPI

-		- The driver that abstracts the ASIC that is supporting the APM port, such as the ICH in an Intel® chipset

-	Because of the possibility of performing SMI or PMI IPI transactions, the ability to generate this

+  This protocol is used initiate SMI/PMI activations. 

+  This protocol could be published by either of the following:

+    - A processor driver to abstract the SMI/PMI IPI

+    - The driver that abstracts the ASIC that is supporting the APM port, such as the ICH in an Intel® chipset

+  Because of the possibility of performing SMI or PMI IPI transactions, the ability to generate this

   

-	The EFI_SMM_CONTROL_PROTOCOL is used by the platform chipset or processor driver. This

+  The EFI_SMM_CONTROL_PROTOCOL is used by the platform chipset or processor driver. This

   protocol is useable both in boot services and runtime. The runtime aspect is so that an

   implementation of EFI_SMM_BASE_PROTOCOL.Communicate() can layer upon this service

   and provide an SMI callback from a general EFI runtime driver.

@@ -156,24 +156,24 @@ EFI_STATUS
   SMI or PMI. There are often I/O ports that, when accessed, will engender the

 **/

 struct _EFI_SMM_CONTROL_PROTOCOL {

-	///

-	///  Initiates the SMI/PMI activation.

-	///

+  ///

+  ///  Initiates the SMI/PMI activation.

+  ///

   EFI_SMM_ACTIVATE          Trigger;

-	///

-	///  Quiesces the SMI/PMI activation.

-	///

+  ///

+  ///  Quiesces the SMI/PMI activation.

+  ///

   EFI_SMM_DEACTIVATE        Clear;

-	///

-	/// Provides data on the register used as the source of the SMI.

-	///

+  ///

+  /// Provides data on the register used as the source of the SMI.

+  ///

   EFI_SMM_GET_REGISTER_INFO GetRegisterInfo;

-	///

-	/// Minimum interval at which the platform can set the period. A maximum is not

-	/// specified in that the SMM infrastructure code can emulate a maximum interval that is

-	/// greater than the hardware capabilities by using software emulation in the SMM

-	/// infrastructure code.

-	///

+  ///

+  /// Minimum interval at which the platform can set the period. A maximum is not

+  /// specified in that the SMM infrastructure code can emulate a maximum interval that is

+  /// greater than the hardware capabilities by using software emulation in the SMM

+  /// infrastructure code.

+  ///

   UINTN                     MinimumTriggerPeriod;

 };

 

diff --git a/IntelFrameworkPkg/Include/Protocol/SmmStandbyButtonDispatch.h b/IntelFrameworkPkg/Include/Protocol/SmmStandbyButtonDispatch.h
index 78c6ff844f..ae2ed464eb 100644
--- a/IntelFrameworkPkg/Include/Protocol/SmmStandbyButtonDispatch.h
+++ b/IntelFrameworkPkg/Include/Protocol/SmmStandbyButtonDispatch.h
@@ -131,17 +131,17 @@ EFI_STATUS
 // Interface structure for the SMM Standby Button SMI Dispatch Protocol

 //

 /**

-	This protocol  provices the parent dispatch service for the standby button SMI source generator.

-	Provides the ability to install child handlers for the given event types.

+  This protocol  provices the parent dispatch service for the standby button SMI source generator.

+  Provides the ability to install child handlers for the given event types.

  **/

 struct _EFI_SMM_STANDBY_BUTTON_DISPATCH_PROTOCOL {

-	/// 

+  /// 

   /// Installs a child service to be dispatched by this protocol.

   ///

   EFI_SMM_STANDBY_BUTTON_REGISTER   Register;\

-	///

-	/// Removes a child service dispatched by this protocol.

-	///

+  ///

+  /// Removes a child service dispatched by this protocol.

+  ///

   EFI_SMM_STANDBY_BUTTON_UNREGISTER UnRegister;

 };