diff options
Diffstat (limited to 'ArmPkg/Library/BasePeCoffLib')
| -rw-r--r-- | ArmPkg/Library/BasePeCoffLib/AArch64/PeCoffLoaderEx.c | 129 | ||||
| -rwxr-xr-x | ArmPkg/Library/BasePeCoffLib/Arm/PeCoffLoaderEx.c | 229 | ||||
| -rwxr-xr-x | ArmPkg/Library/BasePeCoffLib/BasePeCoff.c | 1528 | ||||
| -rwxr-xr-x | ArmPkg/Library/BasePeCoffLib/BasePeCoffLib.inf | 57 | ||||
| -rwxr-xr-x | ArmPkg/Library/BasePeCoffLib/BasePeCoffLibInternals.h | 131 | ||||
| -rwxr-xr-x | ArmPkg/Library/BasePeCoffLib/Ipf/PeCoffLoaderEx.c | 420 | ||||
| -rwxr-xr-x | ArmPkg/Library/BasePeCoffLib/PeCoffLoaderEx.c | 90 |
7 files changed, 0 insertions, 2584 deletions
diff --git a/ArmPkg/Library/BasePeCoffLib/AArch64/PeCoffLoaderEx.c b/ArmPkg/Library/BasePeCoffLib/AArch64/PeCoffLoaderEx.c deleted file mode 100644 index 3fea4620db..0000000000 --- a/ArmPkg/Library/BasePeCoffLib/AArch64/PeCoffLoaderEx.c +++ /dev/null @@ -1,129 +0,0 @@ -/** @file
- Specific relocation fixups for ARM architecture.
-
- Copyright (c) 2006 - 2009, Intel Corporation. All rights reserved.<BR>
- Portions copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
- Portions copyright (c) 2011 - 2013, ARM Ltd. All rights reserved.<BR>
-
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "BasePeCoffLibInternals.h"
-#include <Library/BaseLib.h>
-
-//
-// Note: Currently only large memory model is supported by UEFI relocation code.
-//
-
-/**
- Performs an AARCH64-based specific relocation fixup and is a no-op on other
- instruction sets.
-
- @param Reloc The pointer to the relocation record.
- @param Fixup The pointer to the address to fix up.
- @param FixupData The pointer to a buffer to log the fixups.
- @param Adjust The offset to adjust the fixup.
-
- @return Status code.
-
-**/
-RETURN_STATUS
-PeCoffLoaderRelocateImageEx (
- IN UINT16 **Reloc,
- IN OUT CHAR8 *Fixup,
- IN OUT CHAR8 **FixupData,
- IN UINT64 Adjust
- )
-{
- UINT64 *F64;
-
- switch ((**Reloc) >> 12) {
-
- case EFI_IMAGE_REL_BASED_DIR64:
- F64 = (UINT64 *) Fixup;
- *F64 = *F64 + (UINT64) Adjust;
- if (*FixupData != NULL) {
- *FixupData = ALIGN_POINTER(*FixupData, sizeof(UINT64));
- *(UINT64 *)(*FixupData) = *F64;
- *FixupData = *FixupData + sizeof(UINT64);
- }
- break;
-
- default:
- return RETURN_UNSUPPORTED;
- }
-
- return RETURN_SUCCESS;
-}
-
-/**
- Returns TRUE if the machine type of PE/COFF image is supported. Supported
- does not mean the image can be executed it means the PE/COFF loader supports
- loading and relocating of the image type. It's up to the caller to support
- the entry point.
-
- @param Machine Machine type from the PE Header.
-
- @return TRUE if this PE/COFF loader can load the image
-
-**/
-BOOLEAN
-PeCoffLoaderImageFormatSupported (
- IN UINT16 Machine
- )
-{
- if ((Machine == IMAGE_FILE_MACHINE_ARM64) || (Machine == IMAGE_FILE_MACHINE_EBC)) {
- return TRUE;
- }
-
- return FALSE;
-}
-
-/**
- Performs an ARM-based specific re-relocation fixup and is a no-op on other
- instruction sets. This is used to re-relocated the image into the EFI virtual
- space for runtime calls.
-
- @param Reloc The pointer to the relocation record.
- @param Fixup The pointer to the address to fix up.
- @param FixupData The pointer to a buffer to log the fixups.
- @param Adjust The offset to adjust the fixup.
-
- @return Status code.
-
-**/
-RETURN_STATUS
-PeHotRelocateImageEx (
- IN UINT16 **Reloc,
- IN OUT CHAR8 *Fixup,
- IN OUT CHAR8 **FixupData,
- IN UINT64 Adjust
- )
-{
- UINT64 *Fixup64;
-
- switch ((**Reloc) >> 12) {
- case EFI_IMAGE_REL_BASED_DIR64:
- Fixup64 = (UINT64 *) Fixup;
- *FixupData = ALIGN_POINTER (*FixupData, sizeof (UINT64));
- if (*(UINT64 *) (*FixupData) == *Fixup64) {
- *Fixup64 = *Fixup64 + (UINT64) Adjust;
- }
-
- *FixupData = *FixupData + sizeof (UINT64);
- break;
-
- default:
- DEBUG ((EFI_D_ERROR, "PeHotRelocateEx:unknown fixed type\n"));
- return RETURN_UNSUPPORTED;
- }
-
- return RETURN_SUCCESS;
-}
diff --git a/ArmPkg/Library/BasePeCoffLib/Arm/PeCoffLoaderEx.c b/ArmPkg/Library/BasePeCoffLib/Arm/PeCoffLoaderEx.c deleted file mode 100755 index 4cd33800bb..0000000000 --- a/ArmPkg/Library/BasePeCoffLib/Arm/PeCoffLoaderEx.c +++ /dev/null @@ -1,229 +0,0 @@ -/** @file
- Specific relocation fixups for ARM architecture.
-
- Copyright (c) 2006 - 2009, Intel Corporation. All rights reserved.<BR>
- Portions copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "BasePeCoffLibInternals.h"
-
-
-//
-// The PE/COFF specification needs to get update for ARMv7 MOVW/MOVT
-// When it gets updated we can move these defines to PeImage.h
-//
-#define EFI_IMAGE_REL_BASED_ARM_THUMB_MOVW 11
-#define EFI_IMAGE_REL_BASED_ARM_THUMB_MOVT 12
-
-
-/**
- Pass in a pointer to an ARM MOVT or MOVW immediate instruciton and
- return the immediate data encoded in the instruction
-
- @param Instruction Pointer to ARM MOVT or MOVW immediate instruction
-
- @return Immediate address encoded in the instruction
-
-**/
-UINT16
-ThumbMovtImmediateAddress (
- IN UINT16 *Instruction
- )
-{
- UINT32 Movt;
- UINT16 Address;
-
- // Thumb2 is two 16-bit instructions working together. Not a single 32-bit instruction
- // Example MOVT R0, #0 is 0x0000f2c0 or 0xf2c0 0x0000
- Movt = (*Instruction << 16) | (*(Instruction + 1));
-
- // imm16 = imm4:i:imm3:imm8
- // imm4 -> Bit19:Bit16
- // i -> Bit26
- // imm3 -> Bit14:Bit12
- // imm8 -> Bit7:Bit0
- Address = (UINT16)(Movt & 0x000000ff); // imm8
- Address |= (UINT16)((Movt >> 4) & 0x0000f700); // imm4 imm3
- Address |= (Movt & BIT26 ? BIT11 : 0); // i
- return Address;
-}
-
-
-/**
- Update an ARM MOVT or MOVW immediate instruction immediate data.
-
- @param Instruction Pointer to ARM MOVT or MOVW immediate instruction
- @param Address New addres to patch into the instruction
-**/
-VOID
-ThumbMovtImmediatePatch (
- IN OUT UINT16 *Instruction,
- IN UINT16 Address
- )
-{
- UINT16 Patch;
-
- // First 16-bit chunk of instruciton
- Patch = ((Address >> 12) & 0x000f); // imm4
- Patch |= (((Address & BIT11) != 0) ? BIT10 : 0); // i
- // Mask out instruction bits and or in address
- *(Instruction) = (*Instruction & ~0x040f) | Patch;
-
- // Second 16-bit chunk of instruction
- Patch = Address & 0x000000ff; // imm8
- Patch |= ((Address << 4) & 0x00007000); // imm3
- // Mask out instruction bits and or in address
- Instruction++;
- *Instruction = (*Instruction & ~0x70ff) | Patch;
-}
-
-
-/**
- Performs an ARM-based specific relocation fixup and is a no-op on other
- instruction sets.
-
- @param Reloc Pointer to Pointer to the relocation record.
- @param Fixup Pointer to the address to fix up.
- @param FixupData Pointer to a buffer to log the fixups.
- @param Adjust The offset to adjust the fixup.
-
- @return Status code.
-
-**/
-RETURN_STATUS
-PeCoffLoaderRelocateImageEx (
- IN UINT16 **Reloc,
- IN OUT CHAR8 *Fixup,
- IN OUT CHAR8 **FixupData,
- IN UINT64 Adjust
- )
-{
- UINT16 *Fixup16;
- UINT16 FixupVal;
- UINT16 *Addend;
-
- Fixup16 = (UINT16 *) Fixup;
-
- switch ((**Reloc) >> 12) {
- case EFI_IMAGE_REL_BASED_ARM_THUMB_MOVW:
- FixupVal = ThumbMovtImmediateAddress (Fixup16) + (UINT16)Adjust;
- ThumbMovtImmediatePatch (Fixup16, FixupVal);
-
- if (*FixupData != NULL) {
- *FixupData = ALIGN_POINTER (*FixupData, sizeof (UINT16));
- *(UINT16 *)*FixupData = *Fixup16;
- *FixupData = *FixupData + sizeof (UINT16);
- }
- break;
-
- case EFI_IMAGE_REL_BASED_ARM_THUMB_MOVT:
- // For MOVT you need to know the lower 16-bits do do the math
- // So this relocation entry is really two entries.
- *Reloc = *Reloc + 1;
- Addend = *Reloc;
- FixupVal = (UINT16)(((ThumbMovtImmediateAddress (Fixup16) << 16) + Adjust + *Addend) >> 16);
- ThumbMovtImmediatePatch (Fixup16, FixupVal);
-
- if (*FixupData != NULL) {
- *FixupData = ALIGN_POINTER (*FixupData, sizeof (UINT16));
- *(UINT16 *)*FixupData = *Fixup16;
- *FixupData = *FixupData + sizeof (UINT16);
- }
- break;
-
- default:
- return RETURN_UNSUPPORTED;
- }
-
- return RETURN_SUCCESS;
-}
-
-/**
- Returns TRUE if the machine type of PE/COFF image is supported. Supported
- does not mean the image can be executed it means the PE/COFF loader supports
- loading and relocating of the image type. It's up to the caller to support
- the entry point.
-
- The IA32/X64 version PE/COFF loader/relocater both support IA32, X64 and EBC images.
-
- @param Machine Machine type from the PE Header.
-
- @return TRUE if this PE/COFF loader can load the image
-
-**/
-BOOLEAN
-PeCoffLoaderImageFormatSupported (
- IN UINT16 Machine
- )
-{
- if ((Machine == IMAGE_FILE_MACHINE_ARMTHUMB_MIXED) || (Machine == IMAGE_FILE_MACHINE_EBC)) {
- return TRUE;
- }
-
- return FALSE;
-}
-
-/**
- Performs an ARM-based specific re-relocation fixup and is a no-op on other
- instruction sets. This is used to re-relocated the image into the EFI virtual
- space for runtime calls.
-
- @param Reloc The pointer to the relocation record.
- @param Fixup The pointer to the address to fix up.
- @param FixupData The pointer to a buffer to log the fixups.
- @param Adjust The offset to adjust the fixup.
-
- @return Status code.
-
-**/
-RETURN_STATUS
-PeHotRelocateImageEx (
- IN UINT16 **Reloc,
- IN OUT CHAR8 *Fixup,
- IN OUT CHAR8 **FixupData,
- IN UINT64 Adjust
- )
-{
- UINT16 *Fixup16;
- UINT16 FixupVal;
- UINT16 *Addend;
-
- Fixup16 = (UINT16 *)Fixup;
-
- switch ((**Reloc) >> 12) {
- case EFI_IMAGE_REL_BASED_ARM_THUMB_MOVW:
- *FixupData = ALIGN_POINTER (*FixupData, sizeof (UINT16));
- if (*(UINT16 *) (*FixupData) == *Fixup16) {
- FixupVal = ThumbMovtImmediateAddress (Fixup16) + (UINT16)Adjust;
- ThumbMovtImmediatePatch (Fixup16, FixupVal);
- }
- break;
-
- case EFI_IMAGE_REL_BASED_ARM_THUMB_MOVT:
- *FixupData = ALIGN_POINTER (*FixupData, sizeof (UINT16));
- if (*(UINT16 *) (*FixupData) == *Fixup16) {
- // For MOVT you need to know the lower 16-bits do do the math
- // So this relocation entry is really two entries.
- *Reloc = *Reloc + 1;
- Addend = *Reloc;
- FixupVal = (UINT16)(((ThumbMovtImmediateAddress (Fixup16) << 16) + Adjust + *Addend) >> 16);
- ThumbMovtImmediatePatch (Fixup16, FixupVal);
- }
- break;
-
- default:
- DEBUG ((EFI_D_ERROR, "PeHotRelocateEx:unknown fixed type\n"));
- return RETURN_UNSUPPORTED;
- }
-
- return RETURN_SUCCESS;
-}
-
diff --git a/ArmPkg/Library/BasePeCoffLib/BasePeCoff.c b/ArmPkg/Library/BasePeCoffLib/BasePeCoff.c deleted file mode 100755 index 8e0ceb8810..0000000000 --- a/ArmPkg/Library/BasePeCoffLib/BasePeCoff.c +++ /dev/null @@ -1,1528 +0,0 @@ -/** @file
- Base PE/COFF loader supports loading any PE32/PE32+ or TE image, but
- only supports relocating IA32, x64, IPF, and EBC images.
-
- Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR>
- Portions copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "BasePeCoffLibInternals.h"
-
-/**
- Retrieves the magic value from the PE/COFF header.
-
- @param Hdr The buffer in which to return the PE32, PE32+, or TE header.
-
- @return EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC - Image is PE32
- @return EFI_IMAGE_NT_OPTIONAL_HDR64_MAGIC - Image is PE32+
-
-**/
-UINT16
-PeCoffLoaderGetPeHeaderMagicValue (
- IN EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr
- )
-{
- //
- // NOTE: Some versions of Linux ELILO for Itanium have an incorrect magic value
- // in the PE/COFF Header. If the MachineType is Itanium(IA64) and the
- // Magic value in the OptionalHeader is EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC
- // then override the returned value to EFI_IMAGE_NT_OPTIONAL_HDR64_MAGIC
- //
- if (Hdr.Pe32->FileHeader.Machine == IMAGE_FILE_MACHINE_IA64 && Hdr.Pe32->OptionalHeader.Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) {
- return EFI_IMAGE_NT_OPTIONAL_HDR64_MAGIC;
- }
- //
- // Return the magic value from the PC/COFF Optional Header
- //
- return Hdr.Pe32->OptionalHeader.Magic;
-}
-
-
-/**
- Retrieves the PE or TE Header from a PE/COFF or TE image.
-
- @param ImageContext The context of the image being loaded.
- @param Hdr The buffer in which to return the PE32, PE32+, or TE header.
-
- @retval RETURN_SUCCESS The PE or TE Header is read.
- @retval Other The error status from reading the PE/COFF or TE image using the ImageRead function.
-
-**/
-RETURN_STATUS
-PeCoffLoaderGetPeHeader (
- IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext,
- OUT EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr
- )
-{
- RETURN_STATUS Status;
- EFI_IMAGE_DOS_HEADER DosHdr;
- UINTN Size;
- UINT16 Magic;
-
- //
- // Read the DOS image header to check for its existence
- //
- Size = sizeof (EFI_IMAGE_DOS_HEADER);
- Status = ImageContext->ImageRead (
- ImageContext->Handle,
- 0,
- &Size,
- &DosHdr
- );
- if (RETURN_ERROR (Status)) {
- ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ;
- return Status;
- }
-
- ImageContext->PeCoffHeaderOffset = 0;
- if (DosHdr.e_magic == EFI_IMAGE_DOS_SIGNATURE) {
- //
- // DOS image header is present, so read the PE header after the DOS image
- // header
- //
- ImageContext->PeCoffHeaderOffset = DosHdr.e_lfanew;
- }
-
- //
- // Read the PE/COFF Header. For PE32 (32-bit) this will read in too much
- // data, but that should not hurt anything. Hdr.Pe32->OptionalHeader.Magic
- // determines if this is a PE32 or PE32+ image. The magic is in the same
- // location in both images.
- //
- Size = sizeof (EFI_IMAGE_OPTIONAL_HEADER_UNION);
- Status = ImageContext->ImageRead (
- ImageContext->Handle,
- ImageContext->PeCoffHeaderOffset,
- &Size,
- Hdr.Pe32
- );
- if (RETURN_ERROR (Status)) {
- ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ;
- return Status;
- }
-
- //
- // Use Signature to figure out if we understand the image format
- //
- if (Hdr.Te->Signature == EFI_TE_IMAGE_HEADER_SIGNATURE) {
- ImageContext->IsTeImage = TRUE;
- ImageContext->Machine = Hdr.Te->Machine;
- ImageContext->ImageType = (UINT16)(Hdr.Te->Subsystem);
- //
- // For TeImage, SectionAlignment is undefined to be set to Zero
- // ImageSize can be calculated.
- //
- ImageContext->ImageSize = 0;
- ImageContext->SectionAlignment = 0;
- ImageContext->SizeOfHeaders = sizeof (EFI_TE_IMAGE_HEADER) + (UINTN)Hdr.Te->BaseOfCode - (UINTN)Hdr.Te->StrippedSize;
-
- } else if (Hdr.Pe32->Signature == EFI_IMAGE_NT_SIGNATURE) {
- ImageContext->IsTeImage = FALSE;
- ImageContext->Machine = Hdr.Pe32->FileHeader.Machine;
-
- Magic = PeCoffLoaderGetPeHeaderMagicValue (Hdr);
-
- if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) {
- //
- // Use PE32 offset
- //
- ImageContext->ImageType = Hdr.Pe32->OptionalHeader.Subsystem;
- ImageContext->ImageSize = (UINT64)Hdr.Pe32->OptionalHeader.SizeOfImage;
- ImageContext->SectionAlignment = Hdr.Pe32->OptionalHeader.SectionAlignment;
- ImageContext->SizeOfHeaders = Hdr.Pe32->OptionalHeader.SizeOfHeaders;
-
- } else if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR64_MAGIC) {
- //
- // Use PE32+ offset
- //
- ImageContext->ImageType = Hdr.Pe32Plus->OptionalHeader.Subsystem;
- ImageContext->ImageSize = (UINT64) Hdr.Pe32Plus->OptionalHeader.SizeOfImage;
- ImageContext->SectionAlignment = Hdr.Pe32Plus->OptionalHeader.SectionAlignment;
- ImageContext->SizeOfHeaders = Hdr.Pe32Plus->OptionalHeader.SizeOfHeaders;
- } else {
- ImageContext->ImageError = IMAGE_ERROR_INVALID_MACHINE_TYPE;
- return RETURN_UNSUPPORTED;
- }
- } else {
- ImageContext->ImageError = IMAGE_ERROR_INVALID_MACHINE_TYPE;
- return RETURN_UNSUPPORTED;
- }
-
- if (!PeCoffLoaderImageFormatSupported (ImageContext->Machine)) {
- //
- // If the PE/COFF loader does not support the image type return
- // unsupported. This library can support lots of types of images
- // this does not mean the user of this library can call the entry
- // point of the image.
- //
- return RETURN_UNSUPPORTED;
- }
-
- return RETURN_SUCCESS;
-}
-
-
-/**
- Retrieves information about a PE/COFF image.
-
- Computes the PeCoffHeaderOffset, IsTeImage, ImageType, ImageAddress, ImageSize,
- DestinationAddress, RelocationsStripped, SectionAlignment, SizeOfHeaders, and
- DebugDirectoryEntryRva fields of the ImageContext structure.
- If ImageContext is NULL, then return RETURN_INVALID_PARAMETER.
- If the PE/COFF image accessed through the ImageRead service in the ImageContext
- structure is not a supported PE/COFF image type, then return RETURN_UNSUPPORTED.
- If any errors occur while computing the fields of ImageContext,
- then the error status is returned in the ImageError field of ImageContext.
- If the image is a TE image, then SectionAlignment is set to 0.
- The ImageRead and Handle fields of ImageContext structure must be valid prior
- to invoking this service.
-
- @param ImageContext The pointer to the image context structure that describes the PE/COFF
- image that needs to be examined by this function.
-
- @retval RETURN_SUCCESS The information on the PE/COFF image was collected.
- @retval RETURN_INVALID_PARAMETER ImageContext is NULL.
- @retval RETURN_UNSUPPORTED The PE/COFF image is not supported.
-
-**/
-RETURN_STATUS
-EFIAPI
-PeCoffLoaderGetImageInfo (
- IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext
- )
-{
- RETURN_STATUS Status;
- EFI_IMAGE_OPTIONAL_HEADER_UNION HdrData;
- EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr;
- EFI_IMAGE_DATA_DIRECTORY *DebugDirectoryEntry;
- UINTN Size;
- UINTN Index;
- UINTN DebugDirectoryEntryRva;
- UINTN DebugDirectoryEntryFileOffset;
- UINTN SectionHeaderOffset;
- EFI_IMAGE_SECTION_HEADER SectionHeader;
- EFI_IMAGE_DEBUG_DIRECTORY_ENTRY DebugEntry;
- UINT32 NumberOfRvaAndSizes;
- UINT16 Magic;
-
- if (ImageContext == NULL) {
- return RETURN_INVALID_PARAMETER;
- }
- //
- // Assume success
- //
- ImageContext->ImageError = IMAGE_ERROR_SUCCESS;
-
- Hdr.Union = &HdrData;
- Status = PeCoffLoaderGetPeHeader (ImageContext, Hdr);
- if (RETURN_ERROR (Status)) {
- return Status;
- }
-
- Magic = PeCoffLoaderGetPeHeaderMagicValue (Hdr);
-
- //
- // Retrieve the base address of the image
- //
- if (!(ImageContext->IsTeImage)) {
- if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) {
- //
- // Use PE32 offset
- //
- ImageContext->ImageAddress = Hdr.Pe32->OptionalHeader.ImageBase;
- } else {
- //
- // Use PE32+ offset
- //
- ImageContext->ImageAddress = Hdr.Pe32Plus->OptionalHeader.ImageBase;
- }
- } else {
- ImageContext->ImageAddress = (PHYSICAL_ADDRESS)(Hdr.Te->ImageBase + Hdr.Te->StrippedSize - sizeof (EFI_TE_IMAGE_HEADER));
- }
-
- //
- // Initialize the alternate destination address to 0 indicating that it
- // should not be used.
- //
- ImageContext->DestinationAddress = 0;
-
- //
- // Initialize the debug codeview pointer.
- //
- ImageContext->DebugDirectoryEntryRva = 0;
- ImageContext->CodeView = NULL;
- ImageContext->PdbPointer = NULL;
-
- //
- // Three cases with regards to relocations:
- // - Image has base relocs, RELOCS_STRIPPED==0 => image is relocatable
- // - Image has no base relocs, RELOCS_STRIPPED==1 => Image is not relocatable
- // - Image has no base relocs, RELOCS_STRIPPED==0 => Image is relocatable but
- // has no base relocs to apply
- // Obviously having base relocations with RELOCS_STRIPPED==1 is invalid.
- //
- // Look at the file header to determine if relocations have been stripped, and
- // save this information in the image context for later use.
- //
- if ((!(ImageContext->IsTeImage)) && ((Hdr.Pe32->FileHeader.Characteristics & EFI_IMAGE_FILE_RELOCS_STRIPPED) != 0)) {
- ImageContext->RelocationsStripped = TRUE;
- } else if ((ImageContext->IsTeImage) && (Hdr.Te->DataDirectory[0].Size == 0) && (Hdr.Te->DataDirectory[0].VirtualAddress == 0)) {
- ImageContext->RelocationsStripped = TRUE;
- } else {
- ImageContext->RelocationsStripped = FALSE;
- }
-
- if (!(ImageContext->IsTeImage)) {
- if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) {
- //
- // Use PE32 offset
- //
- NumberOfRvaAndSizes = Hdr.Pe32->OptionalHeader.NumberOfRvaAndSizes;
- DebugDirectoryEntry = (EFI_IMAGE_DATA_DIRECTORY *)&(Hdr.Pe32->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_DEBUG]);
- } else {
- //
- // Use PE32+ offset
- //
- NumberOfRvaAndSizes = Hdr.Pe32Plus->OptionalHeader.NumberOfRvaAndSizes;
- DebugDirectoryEntry = (EFI_IMAGE_DATA_DIRECTORY *)&(Hdr.Pe32Plus->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_DEBUG]);
- }
-
- if (NumberOfRvaAndSizes > EFI_IMAGE_DIRECTORY_ENTRY_DEBUG) {
-
- DebugDirectoryEntryRva = DebugDirectoryEntry->VirtualAddress;
-
- //
- // Determine the file offset of the debug directory... This means we walk
- // the sections to find which section contains the RVA of the debug
- // directory
- //
- DebugDirectoryEntryFileOffset = 0;
-
- SectionHeaderOffset = (UINTN)(
- ImageContext->PeCoffHeaderOffset +
- sizeof (UINT32) +
- sizeof (EFI_IMAGE_FILE_HEADER) +
- Hdr.Pe32->FileHeader.SizeOfOptionalHeader
- );
-
- for (Index = 0; Index < Hdr.Pe32->FileHeader.NumberOfSections; Index++) {
- //
- // Read section header from file
- //
- Size = sizeof (EFI_IMAGE_SECTION_HEADER);
- Status = ImageContext->ImageRead (
- ImageContext->Handle,
- SectionHeaderOffset,
- &Size,
- &SectionHeader
- );
- if (RETURN_ERROR (Status)) {
- ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ;
- return Status;
- }
-
- if (DebugDirectoryEntryRva >= SectionHeader.VirtualAddress &&
- DebugDirectoryEntryRva < SectionHeader.VirtualAddress + SectionHeader.Misc.VirtualSize) {
-
- DebugDirectoryEntryFileOffset = DebugDirectoryEntryRva - SectionHeader.VirtualAddress + SectionHeader.PointerToRawData;
- break;
- }
-
- SectionHeaderOffset += sizeof (EFI_IMAGE_SECTION_HEADER);
- }
-
- if (DebugDirectoryEntryFileOffset != 0) {
- for (Index = 0; Index < DebugDirectoryEntry->Size; Index += sizeof (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY)) {
- //
- // Read next debug directory entry
- //
- Size = sizeof (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY);
- Status = ImageContext->ImageRead (
- ImageContext->Handle,
- DebugDirectoryEntryFileOffset,
- &Size,
- &DebugEntry
- );
- if (RETURN_ERROR (Status)) {
- ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ;
- return Status;
- }
- if (DebugEntry.Type == EFI_IMAGE_DEBUG_TYPE_CODEVIEW) {
- ImageContext->DebugDirectoryEntryRva = (UINT32) (DebugDirectoryEntryRva + Index);
- if (DebugEntry.RVA == 0 && DebugEntry.FileOffset != 0) {
- ImageContext->ImageSize += DebugEntry.SizeOfData;
- }
-
- return RETURN_SUCCESS;
- }
- }
- }
- }
- } else {
-
- DebugDirectoryEntry = &Hdr.Te->DataDirectory[1];
- DebugDirectoryEntryRva = DebugDirectoryEntry->VirtualAddress;
- SectionHeaderOffset = (UINTN)(sizeof (EFI_TE_IMAGE_HEADER));
-
- DebugDirectoryEntryFileOffset = 0;
-
- for (Index = 0; Index < Hdr.Te->NumberOfSections;) {
- //
- // Read section header from file
- //
- Size = sizeof (EFI_IMAGE_SECTION_HEADER);
- Status = ImageContext->ImageRead (
- ImageContext->Handle,
- SectionHeaderOffset,
- &Size,
- &SectionHeader
- );
- if (RETURN_ERROR (Status)) {
- ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ;
- return Status;
- }
-
- if (DebugDirectoryEntryRva >= SectionHeader.VirtualAddress &&
- DebugDirectoryEntryRva < SectionHeader.VirtualAddress + SectionHeader.Misc.VirtualSize) {
- DebugDirectoryEntryFileOffset = DebugDirectoryEntryRva -
- SectionHeader.VirtualAddress +
- SectionHeader.PointerToRawData +
- sizeof (EFI_TE_IMAGE_HEADER) -
- Hdr.Te->StrippedSize;
-
- //
- // File offset of the debug directory was found, if this is not the last
- // section, then skip to the last section for calculating the image size.
- //
- if (Index < (UINTN) Hdr.Te->NumberOfSections - 1) {
- SectionHeaderOffset += (Hdr.Te->NumberOfSections - 1 - Index) * sizeof (EFI_IMAGE_SECTION_HEADER);
- Index = Hdr.Te->NumberOfSections - 1;
- continue;
- }
- }
-
- //
- // In Te image header there is not a field to describe the ImageSize.
- // Actually, the ImageSize equals the RVA plus the VirtualSize of
- // the last section mapped into memory (Must be rounded up to
- // a multiple of Section Alignment). Per the PE/COFF specification, the
- // section headers in the Section Table must appear in order of the RVA
- // values for the corresponding sections. So the ImageSize can be determined
- // by the RVA and the VirtualSize of the last section header in the
- // Section Table.
- //
- if ((++Index) == (UINTN)Hdr.Te->NumberOfSections) {
- ImageContext->ImageSize = (SectionHeader.VirtualAddress + SectionHeader.Misc.VirtualSize);
- }
-
- SectionHeaderOffset += sizeof (EFI_IMAGE_SECTION_HEADER);
- }
-
- if (DebugDirectoryEntryFileOffset != 0) {
- for (Index = 0; Index < DebugDirectoryEntry->Size; Index += sizeof (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY)) {
- //
- // Read next debug directory entry
- //
- Size = sizeof (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY);
- Status = ImageContext->ImageRead (
- ImageContext->Handle,
- DebugDirectoryEntryFileOffset,
- &Size,
- &DebugEntry
- );
- if (RETURN_ERROR (Status)) {
- ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ;
- return Status;
- }
-
- if (DebugEntry.Type == EFI_IMAGE_DEBUG_TYPE_CODEVIEW) {
- ImageContext->DebugDirectoryEntryRva = (UINT32) (DebugDirectoryEntryRva + Index);
- return RETURN_SUCCESS;
- }
- }
- }
- }
-
- return RETURN_SUCCESS;
-}
-
-
-/**
- Converts an image address to the loaded address.
-
- @param ImageContext The context of the image being loaded.
- @param Address The relative virtual address to be converted to the loaded address.
-
- @return The converted address or NULL if the address can not be converted.
-
-**/
-VOID *
-PeCoffLoaderImageAddress (
- IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext,
- IN UINTN Address
- )
-{
- //
- // Make sure that Address and ImageSize is correct for the loaded image.
- //
- if (Address >= ImageContext->ImageSize) {
- ImageContext->ImageError = IMAGE_ERROR_INVALID_IMAGE_ADDRESS;
- return NULL;
- }
-
- return (CHAR8 *)((UINTN) ImageContext->ImageAddress + Address);
-}
-
-/**
- Applies relocation fixups to a PE/COFF image that was loaded with PeCoffLoaderLoadImage().
-
- If the DestinationAddress field of ImageContext is 0, then use the ImageAddress field of
- ImageContext as the relocation base address. Otherwise, use the DestinationAddress field
- of ImageContext as the relocation base address. The caller must allocate the relocation
- fixup log buffer and fill in the FixupData field of ImageContext prior to calling this function.
-
- The ImageRead, Handle, PeCoffHeaderOffset, IsTeImage, Machine, ImageType, ImageAddress,
- ImageSize, DestinationAddress, RelocationsStripped, SectionAlignment, SizeOfHeaders,
- DebugDirectoryEntryRva, EntryPoint, FixupDataSize, CodeView, PdbPointer, and FixupData of
- the ImageContext structure must be valid prior to invoking this service.
-
- If ImageContext is NULL, then ASSERT().
-
- Note that if the platform does not maintain coherency between the instruction cache(s) and the data
- cache(s) in hardware, then the caller is responsible for performing cache maintenance operations
- prior to transferring control to a PE/COFF image that is loaded using this library.
-
- @param ImageContext The pointer to the image context structure that describes the PE/COFF
- image that is being relocated.
-
- @retval RETURN_SUCCESS The PE/COFF image was relocated.
- Extended status information is in the ImageError field of ImageContext.
- @retval RETURN_LOAD_ERROR The image in not a valid PE/COFF image.
- Extended status information is in the ImageError field of ImageContext.
- @retval RETURN_UNSUPPORTED A relocation record type is not supported.
- Extended status information is in the ImageError field of ImageContext.
-
-**/
-RETURN_STATUS
-EFIAPI
-PeCoffLoaderRelocateImage (
- IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext
- )
-{
- RETURN_STATUS Status;
- EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr;
- EFI_IMAGE_DATA_DIRECTORY *RelocDir;
- UINT64 Adjust;
- EFI_IMAGE_BASE_RELOCATION *RelocBase;
- EFI_IMAGE_BASE_RELOCATION *RelocBaseEnd;
- UINT16 *Reloc;
- UINT16 *RelocEnd;
- CHAR8 *Fixup;
- CHAR8 *FixupBase;
- UINT16 *Fixup16;
- UINT32 *Fixup32;
- UINT64 *Fixup64;
- CHAR8 *FixupData;
- PHYSICAL_ADDRESS BaseAddress;
- UINT32 NumberOfRvaAndSizes;
- UINT16 Magic;
-
- ASSERT (ImageContext != NULL);
-
- //
- // Assume success
- //
- ImageContext->ImageError = IMAGE_ERROR_SUCCESS;
-
- //
- // If there are no relocation entries, then we are done
- //
- if (ImageContext->RelocationsStripped) {
- // Applies additional environment specific actions to relocate fixups
- // to a PE/COFF image if needed
- PeCoffLoaderRelocateImageExtraAction (ImageContext);
- return RETURN_SUCCESS;
- }
-
- //
- // If the destination address is not 0, use that rather than the
- // image address as the relocation target.
- //
- if (ImageContext->DestinationAddress != 0) {
- BaseAddress = ImageContext->DestinationAddress;
- } else {
- BaseAddress = ImageContext->ImageAddress;
- }
-
- if (!(ImageContext->IsTeImage)) {
- Hdr.Pe32 = (EFI_IMAGE_NT_HEADERS32 *)((UINTN)ImageContext->ImageAddress + ImageContext->PeCoffHeaderOffset);
-
- Magic = PeCoffLoaderGetPeHeaderMagicValue (Hdr);
-
- if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) {
- //
- // Use PE32 offset
- //
- Adjust = (UINT64)BaseAddress - Hdr.Pe32->OptionalHeader.ImageBase;
- if (Adjust != 0) {
- Hdr.Pe32->OptionalHeader.ImageBase = (UINT32)BaseAddress;
- }
-
- NumberOfRvaAndSizes = Hdr.Pe32->OptionalHeader.NumberOfRvaAndSizes;
- RelocDir = &Hdr.Pe32->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC];
- } else {
- //
- // Use PE32+ offset
- //
- Adjust = (UINT64) BaseAddress - Hdr.Pe32Plus->OptionalHeader.ImageBase;
- if (Adjust != 0) {
- Hdr.Pe32Plus->OptionalHeader.ImageBase = (UINT64)BaseAddress;
- }
-
- NumberOfRvaAndSizes = Hdr.Pe32Plus->OptionalHeader.NumberOfRvaAndSizes;
- RelocDir = &Hdr.Pe32Plus->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC];
- }
-
- //
- // Find the relocation block
- // Per the PE/COFF spec, you can't assume that a given data directory
- // is present in the image. You have to check the NumberOfRvaAndSizes in
- // the optional header to verify a desired directory entry is there.
- //
-
- if ((NumberOfRvaAndSizes > EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC) && (RelocDir->Size > 0)) {
- RelocBase = PeCoffLoaderImageAddress (ImageContext, RelocDir->VirtualAddress);
- RelocBaseEnd = PeCoffLoaderImageAddress (
- ImageContext,
- RelocDir->VirtualAddress + RelocDir->Size - 1
- );
- if (RelocBase == NULL || RelocBaseEnd == NULL) {
- return RETURN_LOAD_ERROR;
- }
- } else {
- //
- // Set base and end to bypass processing below.
- //
- RelocBase = RelocBaseEnd = NULL;
- }
- } else {
- Hdr.Te = (EFI_TE_IMAGE_HEADER *)(UINTN)(ImageContext->ImageAddress);
- Adjust = (UINT64) (BaseAddress - Hdr.Te->StrippedSize + sizeof (EFI_TE_IMAGE_HEADER) - Hdr.Te->ImageBase);
- if (Adjust != 0) {
- Hdr.Te->ImageBase = (UINT64) (BaseAddress - Hdr.Te->StrippedSize + sizeof (EFI_TE_IMAGE_HEADER));
- }
-
- //
- // Find the relocation block
- //
- RelocDir = &Hdr.Te->DataDirectory[0];
- if (RelocDir->Size > 0) {
- RelocBase = (EFI_IMAGE_BASE_RELOCATION *)(UINTN)(
- ImageContext->ImageAddress +
- RelocDir->VirtualAddress +
- sizeof(EFI_TE_IMAGE_HEADER) -
- Hdr.Te->StrippedSize
- );
- RelocBaseEnd = (EFI_IMAGE_BASE_RELOCATION *) ((UINTN) RelocBase + (UINTN) RelocDir->Size - 1);
- } else {
- //
- // Set base and end to bypass processing below.
- //
- RelocBase = RelocBaseEnd = NULL;
- }
- }
-
- //
- // If Adjust is not zero, then apply fix ups to the image
- //
- if (Adjust != 0) {
- //
- // Run the relocation information and apply the fixups
- //
- FixupData = ImageContext->FixupData;
- while (RelocBase < RelocBaseEnd) {
-
- Reloc = (UINT16 *) ((CHAR8 *) RelocBase + sizeof (EFI_IMAGE_BASE_RELOCATION));
- RelocEnd = (UINT16 *) ((CHAR8 *) RelocBase + RelocBase->SizeOfBlock);
-
- //
- // Make sure RelocEnd is in the Image range.
- //
- if ((CHAR8 *) RelocEnd < (CHAR8 *)((UINTN) ImageContext->ImageAddress) ||
- (CHAR8 *) RelocEnd > (CHAR8 *)((UINTN)ImageContext->ImageAddress + (UINTN)ImageContext->ImageSize)) {
- ImageContext->ImageError = IMAGE_ERROR_FAILED_RELOCATION;
- return RETURN_LOAD_ERROR;
- }
-
- if (!(ImageContext->IsTeImage)) {
- FixupBase = PeCoffLoaderImageAddress (ImageContext, RelocBase->VirtualAddress);
- if (FixupBase == NULL) {
- return RETURN_LOAD_ERROR;
- }
- } else {
- FixupBase = (CHAR8 *)(UINTN)(ImageContext->ImageAddress +
- RelocBase->VirtualAddress +
- sizeof(EFI_TE_IMAGE_HEADER) -
- Hdr.Te->StrippedSize
- );
- }
-
- //
- // Run this relocation record
- //
- while (Reloc < RelocEnd) {
-
- Fixup = FixupBase + (*Reloc & 0xFFF);
- switch ((*Reloc) >> 12) {
- case EFI_IMAGE_REL_BASED_ABSOLUTE:
- break;
-
- case EFI_IMAGE_REL_BASED_HIGH:
- Fixup16 = (UINT16 *) Fixup;
- *Fixup16 = (UINT16) (*Fixup16 + ((UINT16) ((UINT32) Adjust >> 16)));
- if (FixupData != NULL) {
- *(UINT16 *) FixupData = *Fixup16;
- FixupData = FixupData + sizeof (UINT16);
- }
- break;
-
- case EFI_IMAGE_REL_BASED_LOW:
- Fixup16 = (UINT16 *) Fixup;
- *Fixup16 = (UINT16) (*Fixup16 + (UINT16) Adjust);
- if (FixupData != NULL) {
- *(UINT16 *) FixupData = *Fixup16;
- FixupData = FixupData + sizeof (UINT16);
- }
- break;
-
- case EFI_IMAGE_REL_BASED_HIGHLOW:
- Fixup32 = (UINT32 *) Fixup;
- *Fixup32 = *Fixup32 + (UINT32) Adjust;
- if (FixupData != NULL) {
- FixupData = ALIGN_POINTER (FixupData, sizeof (UINT32));
- *(UINT32 *)FixupData = *Fixup32;
- FixupData = FixupData + sizeof (UINT32);
- }
- break;
-
- case EFI_IMAGE_REL_BASED_DIR64:
- Fixup64 = (UINT64 *) Fixup;
- *Fixup64 = *Fixup64 + (UINT64) Adjust;
- if (FixupData != NULL) {
- FixupData = ALIGN_POINTER (FixupData, sizeof(UINT64));
- *(UINT64 *)(FixupData) = *Fixup64;
- FixupData = FixupData + sizeof(UINT64);
- }
- break;
-
- default:
- //
- // The common code does not handle architecture specific immediate fixups.
- // PeCoffLoaderRelocateImageEx () adds support for these complex fixups
- // on IPF and ARM, but it is a No-Op on other architectures.
- //
- Status = PeCoffLoaderRelocateImageEx (&Reloc, Fixup, &FixupData, Adjust);
- if (RETURN_ERROR (Status)) {
- ImageContext->ImageError = IMAGE_ERROR_FAILED_RELOCATION;
- return Status;
- }
- }
-
- //
- // Next relocation record
- //
- Reloc += 1;
- }
-
- //
- // Next reloc block
- //
- RelocBase = (EFI_IMAGE_BASE_RELOCATION *) RelocEnd;
- }
-
- //
- // Adjust the EntryPoint to match the linked-to address
- //
- if (ImageContext->DestinationAddress != 0) {
- ImageContext->EntryPoint -= (UINT64) ImageContext->ImageAddress;
- ImageContext->EntryPoint += (UINT64) ImageContext->DestinationAddress;
- }
- }
-
- // Applies additional environment specific actions to relocate fixups
- // to a PE/COFF image if needed
- PeCoffLoaderRelocateImageExtraAction (ImageContext);
-
- return RETURN_SUCCESS;
-}
-
-/**
- Loads a PE/COFF image into memory.
-
- Loads the PE/COFF image accessed through the ImageRead service of ImageContext into the buffer
- specified by the ImageAddress and ImageSize fields of ImageContext. The caller must allocate
- the load buffer and fill in the ImageAddress and ImageSize fields prior to calling this function.
- The EntryPoint, FixupDataSize, CodeView, PdbPointer and HiiResourceData fields of ImageContext are computed.
- The ImageRead, Handle, PeCoffHeaderOffset, IsTeImage, Machine, ImageType, ImageAddress, ImageSize,
- DestinationAddress, RelocationsStripped, SectionAlignment, SizeOfHeaders, and DebugDirectoryEntryRva
- fields of the ImageContext structure must be valid prior to invoking this service.
-
- If ImageContext is NULL, then ASSERT().
-
- Note that if the platform does not maintain coherency between the instruction cache(s) and the data
- cache(s) in hardware, then the caller is responsible for performing cache maintenance operations
- prior to transferring control to a PE/COFF image that is loaded using this library.
-
- @param ImageContext The pointer to the image context structure that describes the PE/COFF
- image that is being loaded.
-
- @retval RETURN_SUCCESS The PE/COFF image was loaded into the buffer specified by
- the ImageAddress and ImageSize fields of ImageContext.
- Extended status information is in the ImageError field of ImageContext.
- @retval RETURN_BUFFER_TOO_SMALL The caller did not provide a large enough buffer.
- Extended status information is in the ImageError field of ImageContext.
- @retval RETURN_LOAD_ERROR The PE/COFF image is an EFI Runtime image with no relocations.
- Extended status information is in the ImageError field of ImageContext.
- @retval RETURN_INVALID_PARAMETER The image address is invalid.
- Extended status information is in the ImageError field of ImageContext.
-
-**/
-RETURN_STATUS
-EFIAPI
-PeCoffLoaderLoadImage (
- IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext
- )
-{
- RETURN_STATUS Status;
- EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr;
- PE_COFF_LOADER_IMAGE_CONTEXT CheckContext;
- EFI_IMAGE_SECTION_HEADER *FirstSection;
- EFI_IMAGE_SECTION_HEADER *Section;
- UINTN NumberOfSections;
- UINTN Index;
- CHAR8 *Base;
- CHAR8 *End;
- CHAR8 *MaxEnd;
- EFI_IMAGE_DATA_DIRECTORY *DirectoryEntry;
- EFI_IMAGE_DEBUG_DIRECTORY_ENTRY *DebugEntry;
- UINTN Size;
- UINT32 TempDebugEntryRva;
- UINT32 NumberOfRvaAndSizes;
- UINT16 Magic;
- EFI_IMAGE_RESOURCE_DIRECTORY *ResourceDirectory;
- EFI_IMAGE_RESOURCE_DIRECTORY_ENTRY *ResourceDirectoryEntry;
- EFI_IMAGE_RESOURCE_DIRECTORY_STRING *ResourceDirectoryString;
- EFI_IMAGE_RESOURCE_DATA_ENTRY *ResourceDataEntry;
-
-
- ASSERT (ImageContext != NULL);
-
- //
- // Assume success
- //
- ImageContext->ImageError = IMAGE_ERROR_SUCCESS;
-
- //
- // Copy the provided context information into our local version, get what we
- // can from the original image, and then use that to make sure everything
- // is legit.
- //
- CopyMem (&CheckContext, ImageContext, sizeof (PE_COFF_LOADER_IMAGE_CONTEXT));
-
- Status = PeCoffLoaderGetImageInfo (&CheckContext);
- if (RETURN_ERROR (Status)) {
- return Status;
- }
-
- //
- // Make sure there is enough allocated space for the image being loaded
- //
- if (ImageContext->ImageSize < CheckContext.ImageSize) {
- ImageContext->ImageError = IMAGE_ERROR_INVALID_IMAGE_SIZE;
- return RETURN_BUFFER_TOO_SMALL;
- }
- if (ImageContext->ImageAddress == 0) {
- //
- // Image cannot be loaded into 0 address.
- //
- ImageContext->ImageError = IMAGE_ERROR_INVALID_IMAGE_ADDRESS;
- return RETURN_INVALID_PARAMETER;
- }
- //
- // If there's no relocations, then make sure it's not a runtime driver,
- // and that it's being loaded at the linked address.
- //
- if (CheckContext.RelocationsStripped) {
- //
- // If the image does not contain relocations and it is a runtime driver
- // then return an error.
- //
- if (CheckContext.ImageType == EFI_IMAGE_SUBSYSTEM_EFI_RUNTIME_DRIVER) {
- ImageContext->ImageError = IMAGE_ERROR_INVALID_SUBSYSTEM;
- return RETURN_LOAD_ERROR;
- }
- //
- // If the image does not contain relocations, and the requested load address
- // is not the linked address, then return an error.
- //
- if (CheckContext.ImageAddress != ImageContext->ImageAddress) {
- ImageContext->ImageError = IMAGE_ERROR_INVALID_IMAGE_ADDRESS;
- return RETURN_INVALID_PARAMETER;
- }
- }
- //
- // Make sure the allocated space has the proper section alignment
- //
- if (!(ImageContext->IsTeImage)) {
- if ((ImageContext->ImageAddress & (CheckContext.SectionAlignment - 1)) != 0) {
- ImageContext->ImageError = IMAGE_ERROR_INVALID_SECTION_ALIGNMENT;
- return RETURN_INVALID_PARAMETER;
- }
- }
- //
- // Read the entire PE/COFF or TE header into memory
- //
- if (!(ImageContext->IsTeImage)) {
- Status = ImageContext->ImageRead (
- ImageContext->Handle,
- 0,
- &ImageContext->SizeOfHeaders,
- (VOID *) (UINTN) ImageContext->ImageAddress
- );
-
- Hdr.Pe32 = (EFI_IMAGE_NT_HEADERS32 *)((UINTN)ImageContext->ImageAddress + ImageContext->PeCoffHeaderOffset);
-
- FirstSection = (EFI_IMAGE_SECTION_HEADER *) (
- (UINTN)ImageContext->ImageAddress +
- ImageContext->PeCoffHeaderOffset +
- sizeof(UINT32) +
- sizeof(EFI_IMAGE_FILE_HEADER) +
- Hdr.Pe32->FileHeader.SizeOfOptionalHeader
- );
- NumberOfSections = (UINTN) (Hdr.Pe32->FileHeader.NumberOfSections);
- } else {
- Status = ImageContext->ImageRead (
- ImageContext->Handle,
- 0,
- &ImageContext->SizeOfHeaders,
- (VOID*)(UINTN)ImageContext->ImageAddress
- );
-
- Hdr.Te = (EFI_TE_IMAGE_HEADER *)(UINTN)(ImageContext->ImageAddress);
-
- FirstSection = (EFI_IMAGE_SECTION_HEADER *) (
- (UINTN)ImageContext->ImageAddress +
- sizeof(EFI_TE_IMAGE_HEADER)
- );
- NumberOfSections = (UINTN) (Hdr.Te->NumberOfSections);
-
- }
-
- if (RETURN_ERROR (Status)) {
- ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ;
- return RETURN_LOAD_ERROR;
- }
-
- //
- // Load each section of the image
- //
- Section = FirstSection;
- for (Index = 0, MaxEnd = NULL; Index < NumberOfSections; Index++) {
- //
- // Read the section
- //
- Size = (UINTN) Section->Misc.VirtualSize;
- if ((Size == 0) || (Size > Section->SizeOfRawData)) {
- Size = (UINTN) Section->SizeOfRawData;
- }
-
- //
- // Compute sections address
- //
- Base = PeCoffLoaderImageAddress (ImageContext, Section->VirtualAddress);
- End = PeCoffLoaderImageAddress (
- ImageContext,
- Section->VirtualAddress + Section->Misc.VirtualSize - 1
- );
-
- //
- // If the size of the section is non-zero and the base address or end address resolved to 0, then fail.
- //
- if ((Size > 0) && ((Base == NULL) || (End == NULL))) {
- ImageContext->ImageError = IMAGE_ERROR_SECTION_NOT_LOADED;
- return RETURN_LOAD_ERROR;
- }
-
- if (ImageContext->IsTeImage) {
- Base = (CHAR8 *)((UINTN) Base + sizeof (EFI_TE_IMAGE_HEADER) - (UINTN)Hdr.Te->StrippedSize);
- End = (CHAR8 *)((UINTN) End + sizeof (EFI_TE_IMAGE_HEADER) - (UINTN)Hdr.Te->StrippedSize);
- }
-
- if (End > MaxEnd) {
- MaxEnd = End;
- }
-
- if (Section->SizeOfRawData > 0) {
- if (!(ImageContext->IsTeImage)) {
- Status = ImageContext->ImageRead (
- ImageContext->Handle,
- Section->PointerToRawData,
- &Size,
- Base
- );
- } else {
- Status = ImageContext->ImageRead (
- ImageContext->Handle,
- Section->PointerToRawData + sizeof (EFI_TE_IMAGE_HEADER) - (UINTN)Hdr.Te->StrippedSize,
- &Size,
- Base
- );
- }
-
- if (RETURN_ERROR (Status)) {
- ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ;
- return Status;
- }
- }
-
- //
- // If raw size is less then virtual size, zero fill the remaining
- //
-
- if (Size < Section->Misc.VirtualSize) {
- ZeroMem (Base + Size, Section->Misc.VirtualSize - Size);
- }
-
- //
- // Next Section
- //
- Section += 1;
- }
-
- //
- // Get image's entry point
- //
- Magic = PeCoffLoaderGetPeHeaderMagicValue (Hdr);
- if (!(ImageContext->IsTeImage)) {
- //
- // Sizes of AddressOfEntryPoint are different so we need to do this safely
- //
- if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) {
- //
- // Use PE32 offset
- //
- ImageContext->EntryPoint = (PHYSICAL_ADDRESS)(UINTN)PeCoffLoaderImageAddress (
- ImageContext,
- (UINTN)Hdr.Pe32->OptionalHeader.AddressOfEntryPoint
- );
- } else {
- //
- // Use PE32+ offset
- //
- ImageContext->EntryPoint = (PHYSICAL_ADDRESS)(UINTN)PeCoffLoaderImageAddress (
- ImageContext,
- (UINTN)Hdr.Pe32Plus->OptionalHeader.AddressOfEntryPoint
- );
- }
- } else {
- ImageContext->EntryPoint = (PHYSICAL_ADDRESS) (
- (UINTN)ImageContext->ImageAddress +
- (UINTN)Hdr.Te->AddressOfEntryPoint +
- (UINTN)sizeof(EFI_TE_IMAGE_HEADER) -
- (UINTN)Hdr.Te->StrippedSize
- );
- }
-
- //
- // Determine the size of the fixup data
- //
- // Per the PE/COFF spec, you can't assume that a given data directory
- // is present in the image. You have to check the NumberOfRvaAndSizes in
- // the optional header to verify a desired directory entry is there.
- //
- if (!(ImageContext->IsTeImage)) {
- if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) {
- //
- // Use PE32 offset
- //
- NumberOfRvaAndSizes = Hdr.Pe32->OptionalHeader.NumberOfRvaAndSizes;
- DirectoryEntry = (EFI_IMAGE_DATA_DIRECTORY *)&Hdr.Pe32->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC];
- } else {
- //
- // Use PE32+ offset
- //
- NumberOfRvaAndSizes = Hdr.Pe32Plus->OptionalHeader.NumberOfRvaAndSizes;
- DirectoryEntry = (EFI_IMAGE_DATA_DIRECTORY *)&Hdr.Pe32Plus->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC];
- }
-
- if (NumberOfRvaAndSizes > EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC) {
- ImageContext->FixupDataSize = DirectoryEntry->Size / sizeof (UINT16) * sizeof (UINTN);
- } else {
- ImageContext->FixupDataSize = 0;
- }
- } else {
- DirectoryEntry = &Hdr.Te->DataDirectory[0];
- ImageContext->FixupDataSize = DirectoryEntry->Size / sizeof (UINT16) * sizeof (UINTN);
- }
- //
- // Consumer must allocate a buffer for the relocation fixup log.
- // Only used for runtime drivers.
- //
- ImageContext->FixupData = NULL;
-
- //
- // Load the Codeview information if present
- //
- if (ImageContext->DebugDirectoryEntryRva != 0) {
- if (!(ImageContext->IsTeImage)) {
- DebugEntry = PeCoffLoaderImageAddress (
- ImageContext,
- ImageContext->DebugDirectoryEntryRva
- );
- } else {
- DebugEntry = (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY *)(UINTN)(
- ImageContext->ImageAddress +
- ImageContext->DebugDirectoryEntryRva +
- sizeof(EFI_TE_IMAGE_HEADER) -
- Hdr.Te->StrippedSize
- );
- }
-
- if (DebugEntry != NULL) {
- TempDebugEntryRva = DebugEntry->RVA;
- if (DebugEntry->RVA == 0 && DebugEntry->FileOffset != 0) {
- Section--;
- if ((UINTN)Section->SizeOfRawData < Section->Misc.VirtualSize) {
- TempDebugEntryRva = Section->VirtualAddress + Section->Misc.VirtualSize;
- } else {
- TempDebugEntryRva = Section->VirtualAddress + Section->SizeOfRawData;
- }
- }
-
- if (TempDebugEntryRva != 0) {
- if (!(ImageContext->IsTeImage)) {
- ImageContext->CodeView = PeCoffLoaderImageAddress (ImageContext, TempDebugEntryRva);
- } else {
- ImageContext->CodeView = (VOID *)(
- (UINTN)ImageContext->ImageAddress +
- (UINTN)TempDebugEntryRva +
- (UINTN)sizeof (EFI_TE_IMAGE_HEADER) -
- (UINTN) Hdr.Te->StrippedSize
- );
- }
-
- if (ImageContext->CodeView == NULL) {
- ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ;
- return RETURN_LOAD_ERROR;
- }
-
- if (DebugEntry->RVA == 0) {
- Size = DebugEntry->SizeOfData;
- if (!(ImageContext->IsTeImage)) {
- Status = ImageContext->ImageRead (
- ImageContext->Handle,
- DebugEntry->FileOffset,
- &Size,
- ImageContext->CodeView
- );
- } else {
- Status = ImageContext->ImageRead (
- ImageContext->Handle,
- DebugEntry->FileOffset + sizeof (EFI_TE_IMAGE_HEADER) - Hdr.Te->StrippedSize,
- &Size,
- ImageContext->CodeView
- );
- //
- // Should we apply fix up to this field according to the size difference between PE and TE?
- // Because now we maintain TE header fields unfixed, this field will also remain as they are
- // in original PE image.
- //
- }
-
- if (RETURN_ERROR (Status)) {
- ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ;
- return RETURN_LOAD_ERROR;
- }
-
- DebugEntry->RVA = TempDebugEntryRva;
- }
-
- switch (*(UINT32 *) ImageContext->CodeView) {
- case CODEVIEW_SIGNATURE_NB10:
- ImageContext->PdbPointer = (CHAR8 *)ImageContext->CodeView + sizeof (EFI_IMAGE_DEBUG_CODEVIEW_NB10_ENTRY);
- break;
-
- case CODEVIEW_SIGNATURE_RSDS:
- ImageContext->PdbPointer = (CHAR8 *)ImageContext->CodeView + sizeof (EFI_IMAGE_DEBUG_CODEVIEW_RSDS_ENTRY);
- break;
-
- case CODEVIEW_SIGNATURE_MTOC:
- ImageContext->PdbPointer = (CHAR8 *)ImageContext->CodeView + sizeof (EFI_IMAGE_DEBUG_CODEVIEW_MTOC_ENTRY);
- break;
-
- default:
- break;
- }
- }
- }
- }
-
- //
- // Get Image's HII resource section
- //
- ImageContext->HiiResourceData = 0;
- if (!(ImageContext->IsTeImage)) {
- if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) {
- //
- // Use PE32 offset
- //
- DirectoryEntry = (EFI_IMAGE_DATA_DIRECTORY *)&Hdr.Pe32->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_RESOURCE];
- } else {
- //
- // Use PE32+ offset
- //
- DirectoryEntry = (EFI_IMAGE_DATA_DIRECTORY *)&Hdr.Pe32Plus->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_RESOURCE];
- }
-
- if (DirectoryEntry->Size != 0) {
- Base = PeCoffLoaderImageAddress (ImageContext, DirectoryEntry->VirtualAddress);
- if (Base != NULL) {
- ResourceDirectory = (EFI_IMAGE_RESOURCE_DIRECTORY *) Base;
- ResourceDirectoryEntry = (EFI_IMAGE_RESOURCE_DIRECTORY_ENTRY *) (ResourceDirectory + 1);
-
- for (Index = 0; Index < ResourceDirectory->NumberOfNamedEntries; Index++) {
- if (ResourceDirectoryEntry->u1.s.NameIsString) {
- ResourceDirectoryString = (EFI_IMAGE_RESOURCE_DIRECTORY_STRING *) (Base + ResourceDirectoryEntry->u1.s.NameOffset);
-
- if (ResourceDirectoryString->Length == 3 &&
- ResourceDirectoryString->String[0] == L'H' &&
- ResourceDirectoryString->String[1] == L'I' &&
- ResourceDirectoryString->String[2] == L'I') {
- //
- // Resource Type "HII" found
- //
- if (ResourceDirectoryEntry->u2.s.DataIsDirectory) {
- //
- // Move to next level - resource Name
- //
- ResourceDirectory = (EFI_IMAGE_RESOURCE_DIRECTORY *) (Base + ResourceDirectoryEntry->u2.s.OffsetToDirectory);
- ResourceDirectoryEntry = (EFI_IMAGE_RESOURCE_DIRECTORY_ENTRY *) (ResourceDirectory + 1);
-
- if (ResourceDirectoryEntry->u2.s.DataIsDirectory) {
- //
- // Move to next level - resource Language
- //
- ResourceDirectory = (EFI_IMAGE_RESOURCE_DIRECTORY *) (Base + ResourceDirectoryEntry->u2.s.OffsetToDirectory);
- ResourceDirectoryEntry = (EFI_IMAGE_RESOURCE_DIRECTORY_ENTRY *) (ResourceDirectory + 1);
- }
- }
-
- //
- // Now it ought to be resource Data
- //
- if (!ResourceDirectoryEntry->u2.s.DataIsDirectory) {
- ResourceDataEntry = (EFI_IMAGE_RESOURCE_DATA_ENTRY *) (Base + ResourceDirectoryEntry->u2.OffsetToData);
- ImageContext->HiiResourceData = (PHYSICAL_ADDRESS) (UINTN) PeCoffLoaderImageAddress (ImageContext, ResourceDataEntry->OffsetToData);
- break;
- }
- }
- }
- ResourceDirectoryEntry++;
- }
- }
- }
- }
-
- return Status;
-}
-
-
-/**
- Reapply fixups on a fixed up PE32/PE32+ image to allow virutal calling at EFI
- runtime.
-
- This function reapplies relocation fixups to the PE/COFF image specified by ImageBase
- and ImageSize so the image will execute correctly when the PE/COFF image is mapped
- to the address specified by VirtualImageBase. RelocationData must be identical
- to the FiuxupData buffer from the PE_COFF_LOADER_IMAGE_CONTEXT structure
- after this PE/COFF image was relocated with PeCoffLoaderRelocateImage().
-
- Note that if the platform does not maintain coherency between the instruction cache(s) and the data
- cache(s) in hardware, then the caller is responsible for performing cache maintenance operations
- prior to transferring control to a PE/COFF image that is loaded using this library.
-
- @param ImageBase The base address of a PE/COFF image that has been loaded
- and relocated into system memory.
- @param VirtImageBase The request virtual address that the PE/COFF image is to
- be fixed up for.
- @param ImageSize The size, in bytes, of the PE/COFF image.
- @param RelocationData A pointer to the relocation data that was collected when the PE/COFF
- image was relocated using PeCoffLoaderRelocateImage().
-
-**/
-VOID
-EFIAPI
-PeCoffLoaderRelocateImageForRuntime (
- IN PHYSICAL_ADDRESS ImageBase,
- IN PHYSICAL_ADDRESS VirtImageBase,
- IN UINTN ImageSize,
- IN VOID *RelocationData
- )
-{
- CHAR8 *OldBase;
- CHAR8 *NewBase;
- EFI_IMAGE_DOS_HEADER *DosHdr;
- EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr;
- UINT32 NumberOfRvaAndSizes;
- EFI_IMAGE_DATA_DIRECTORY *DataDirectory;
- EFI_IMAGE_DATA_DIRECTORY *RelocDir;
- EFI_IMAGE_BASE_RELOCATION *RelocBase;
- EFI_IMAGE_BASE_RELOCATION *RelocBaseEnd;
- UINT16 *Reloc;
- UINT16 *RelocEnd;
- CHAR8 *Fixup;
- CHAR8 *FixupBase;
- UINT16 *Fixup16;
- UINT32 *Fixup32;
- UINT64 *Fixup64;
- CHAR8 *FixupData;
- UINTN Adjust;
- RETURN_STATUS Status;
- UINT16 Magic;
-
- OldBase = (CHAR8 *)((UINTN)ImageBase);
- NewBase = (CHAR8 *)((UINTN)VirtImageBase);
- Adjust = (UINTN) NewBase - (UINTN) OldBase;
-
- //
- // Find the image's relocate dir info
- //
- DosHdr = (EFI_IMAGE_DOS_HEADER *)OldBase;
- if (DosHdr->e_magic == EFI_IMAGE_DOS_SIGNATURE) {
- //
- // Valid DOS header so get address of PE header
- //
- Hdr.Pe32 = (EFI_IMAGE_NT_HEADERS32 *)(((CHAR8 *)DosHdr) + DosHdr->e_lfanew);
- } else {
- //
- // No Dos header so assume image starts with PE header.
- //
- Hdr.Pe32 = (EFI_IMAGE_NT_HEADERS32 *)OldBase;
- }
-
- if (Hdr.Pe32->Signature != EFI_IMAGE_NT_SIGNATURE) {
- //
- // Not a valid PE image so Exit
- //
- return ;
- }
-
- Magic = PeCoffLoaderGetPeHeaderMagicValue (Hdr);
-
- if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) {
- //
- // Use PE32 offset
- //
- NumberOfRvaAndSizes = Hdr.Pe32->OptionalHeader.NumberOfRvaAndSizes;
- DataDirectory = (EFI_IMAGE_DATA_DIRECTORY *)&(Hdr.Pe32->OptionalHeader.DataDirectory[0]);
- } else {
- //
- // Use PE32+ offset
- //
- NumberOfRvaAndSizes = Hdr.Pe32Plus->OptionalHeader.NumberOfRvaAndSizes;
- DataDirectory = (EFI_IMAGE_DATA_DIRECTORY *)&(Hdr.Pe32Plus->OptionalHeader.DataDirectory[0]);
- }
-
- //
- // Find the relocation block
- //
- // Per the PE/COFF spec, you can't assume that a given data directory
- // is present in the image. You have to check the NumberOfRvaAndSizes in
- // the optional header to verify a desired directory entry is there.
- //
- if (NumberOfRvaAndSizes > EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC) {
- RelocDir = DataDirectory + EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC;
- RelocBase = (EFI_IMAGE_BASE_RELOCATION *)(UINTN)(ImageBase + RelocDir->VirtualAddress);
- RelocBaseEnd = (EFI_IMAGE_BASE_RELOCATION *)(UINTN)(ImageBase + RelocDir->VirtualAddress + RelocDir->Size);
- } else {
- //
- // Cannot find relocations, cannot continue to relocate the image, ASSERT for this invalid image.
- //
- ASSERT (FALSE);
- return ;
- }
-
- //
- // ASSERT for the invalid image when RelocBase and RelocBaseEnd are both NULL.
- //
- ASSERT (RelocBase != NULL && RelocBaseEnd != NULL);
-
- //
- // Run the whole relocation block. And re-fixup data that has not been
- // modified. The FixupData is used to see if the image has been modified
- // since it was relocated. This is so data sections that have been updated
- // by code will not be fixed up, since that would set them back to
- // defaults.
- //
- FixupData = RelocationData;
- while (RelocBase < RelocBaseEnd) {
-
- Reloc = (UINT16 *) ((UINT8 *) RelocBase + sizeof (EFI_IMAGE_BASE_RELOCATION));
- RelocEnd = (UINT16 *) ((UINT8 *) RelocBase + RelocBase->SizeOfBlock);
- FixupBase = (CHAR8 *) ((UINTN)ImageBase) + RelocBase->VirtualAddress;
-
- //
- // Run this relocation record
- //
- while (Reloc < RelocEnd) {
-
- Fixup = FixupBase + (*Reloc & 0xFFF);
- switch ((*Reloc) >> 12) {
-
- case EFI_IMAGE_REL_BASED_ABSOLUTE:
- break;
-
- case EFI_IMAGE_REL_BASED_HIGH:
- Fixup16 = (UINT16 *) Fixup;
- if (*(UINT16 *) FixupData == *Fixup16) {
- *Fixup16 = (UINT16) (*Fixup16 + ((UINT16) ((UINT32) Adjust >> 16)));
- }
-
- FixupData = FixupData + sizeof (UINT16);
- break;
-
- case EFI_IMAGE_REL_BASED_LOW:
- Fixup16 = (UINT16 *) Fixup;
- if (*(UINT16 *) FixupData == *Fixup16) {
- *Fixup16 = (UINT16) (*Fixup16 + ((UINT16) Adjust & 0xffff));
- }
-
- FixupData = FixupData + sizeof (UINT16);
- break;
-
- case EFI_IMAGE_REL_BASED_HIGHLOW:
- Fixup32 = (UINT32 *) Fixup;
- FixupData = ALIGN_POINTER (FixupData, sizeof (UINT32));
- if (*(UINT32 *) FixupData == *Fixup32) {
- *Fixup32 = *Fixup32 + (UINT32) Adjust;
- }
-
- FixupData = FixupData + sizeof (UINT32);
- break;
-
- case EFI_IMAGE_REL_BASED_DIR64:
- Fixup64 = (UINT64 *)Fixup;
- FixupData = ALIGN_POINTER (FixupData, sizeof (UINT64));
- if (*(UINT64 *) FixupData == *Fixup64) {
- *Fixup64 = *Fixup64 + (UINT64)Adjust;
- }
-
- FixupData = FixupData + sizeof (UINT64);
- break;
-
- case EFI_IMAGE_REL_BASED_HIGHADJ:
- //
- // Not valid Relocation type for UEFI image, ASSERT
- //
- ASSERT (FALSE);
- break;
-
- default:
- //
- // Only Itanium requires ConvertPeImage_Ex
- //
- Status = PeHotRelocateImageEx (&Reloc, Fixup, &FixupData, Adjust);
- if (RETURN_ERROR (Status)) {
- return ;
- }
- }
- //
- // Next relocation record
- //
- Reloc += 1;
- }
- //
- // next reloc block
- //
- RelocBase = (EFI_IMAGE_BASE_RELOCATION *) RelocEnd;
- }
-}
-
-
-/**
- Reads contents of a PE/COFF image from a buffer in system memory.
-
- This is the default implementation of a PE_COFF_LOADER_READ_FILE function
- that assumes FileHandle pointer to the beginning of a PE/COFF image.
- This function reads contents of the PE/COFF image that starts at the system memory
- address specified by FileHandle. The read operation copies ReadSize bytes from the
- PE/COFF image starting at byte offset FileOffset into the buffer specified by Buffer.
- The size of the buffer actually read is returned in ReadSize.
-
- If FileHandle is NULL, then ASSERT().
- If ReadSize is NULL, then ASSERT().
- If Buffer is NULL, then ASSERT().
-
- @param FileHandle The pointer to base of the input stream
- @param FileOffset Offset into the PE/COFF image to begin the read operation.
- @param ReadSize On input, the size in bytes of the requested read operation.
- On output, the number of bytes actually read.
- @param Buffer Output buffer that contains the data read from the PE/COFF image.
-
- @retval RETURN_SUCCESS Data is read from FileOffset from the Handle into
- the buffer.
-**/
-RETURN_STATUS
-EFIAPI
-PeCoffLoaderImageReadFromMemory (
- IN VOID *FileHandle,
- IN UINTN FileOffset,
- IN OUT UINTN *ReadSize,
- OUT VOID *Buffer
- )
-{
- ASSERT (ReadSize != NULL);
- ASSERT (FileHandle != NULL);
- ASSERT (Buffer != NULL);
-
- CopyMem (Buffer, ((UINT8 *)FileHandle) + FileOffset, *ReadSize);
- return RETURN_SUCCESS;
-}
-
-/**
- Unloads a loaded PE/COFF image from memory and releases its taken resource.
- Releases any environment specific resources that were allocated when the image
- specified by ImageContext was loaded using PeCoffLoaderLoadImage().
-
- For NT32 emulator, the PE/COFF image loaded by system needs to release.
- For real platform, the PE/COFF image loaded by Core doesn't needs to be unloaded,
- this function can simply return RETURN_SUCCESS.
-
- If ImageContext is NULL, then ASSERT().
-
- @param ImageContext The pointer to the image context structure that describes the PE/COFF
- image to be unloaded.
-
- @retval RETURN_SUCCESS The PE/COFF image was unloaded successfully.
-**/
-RETURN_STATUS
-EFIAPI
-PeCoffLoaderUnloadImage (
- IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext
- )
-{
- //
- // Applies additional environment specific actions to unload a
- // PE/COFF image if needed
- //
- PeCoffLoaderUnloadImageExtraAction (ImageContext);
- return RETURN_SUCCESS;
-}
diff --git a/ArmPkg/Library/BasePeCoffLib/BasePeCoffLib.inf b/ArmPkg/Library/BasePeCoffLib/BasePeCoffLib.inf deleted file mode 100755 index 929d789cb7..0000000000 --- a/ArmPkg/Library/BasePeCoffLib/BasePeCoffLib.inf +++ /dev/null @@ -1,57 +0,0 @@ -## @file
-# PE/COFF Loader Library implementation.
-# The IPF version library supports loading IPF and EBC PE/COFF image.
-# The IA32 version library support loading IA32, X64 and EBC PE/COFF images.
-# The X64 version library support loading IA32, X64 and EBC PE/COFF images.
-#
-# Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
-# Portions copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-# Portions copyright (c) 2011 - 2013, ARM Ltd. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php.
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-##
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = MovtBasePeCoffLib
- FILE_GUID = 11D2AB02-24BD-468b-BB84-E1CD5330BB13
- MODULE_TYPE = BASE
- VERSION_STRING = 1.0
- LIBRARY_CLASS = PeCoffLib
-
-
-#
-# VALID_ARCHITECTURES = IA32 X64 IPF EBC ARM AARCH64
-#
-
-[Sources]
- BasePeCoffLibInternals.h
- BasePeCoff.c
-
-[Sources.IA32, Sources.X64, Sources.EBC]
- PeCoffLoaderEx.c
-
-[Sources.IPF]
- Ipf/PeCoffLoaderEx.c
-
-[Sources.ARM]
- Arm/PeCoffLoaderEx.c
-
-[Sources.AARCH64]
- AArch64/PeCoffLoaderEx.c
-
-[Packages]
- MdePkg/MdePkg.dec
-
-[LibraryClasses]
- DebugLib
- PeCoffExtraActionLib
- BaseMemoryLib
-
diff --git a/ArmPkg/Library/BasePeCoffLib/BasePeCoffLibInternals.h b/ArmPkg/Library/BasePeCoffLib/BasePeCoffLibInternals.h deleted file mode 100755 index 9116fc82ce..0000000000 --- a/ArmPkg/Library/BasePeCoffLib/BasePeCoffLibInternals.h +++ /dev/null @@ -1,131 +0,0 @@ -/** @file
- Declaration of internal functions in PE/COFF Lib.
-
- Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef __BASE_PECOFF_LIB_INTERNALS__
-#define __BASE_PECOFF_LIB_INTERNALS__
-
-#include <Base.h>
-#include <Library/PeCoffLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/DebugLib.h>
-#include <Library/PeCoffExtraActionLib.h>
-#include <IndustryStandard/PeImage.h>
-
-
-
-/**
- Performs an Itanium-based specific relocation fixup and is a no-op on other
- instruction sets.
-
- @param Reloc Pointer to Pointer to the relocation record.
- @param Fixup Pointer to the address to fix up.
- @param FixupData Pointer to a buffer to log the fixups.
- @param Adjust The offset to adjust the fixup.
-
- @return Status code.
-
-**/
-RETURN_STATUS
-PeCoffLoaderRelocateImageEx (
- IN UINT16 **Reloc,
- IN OUT CHAR8 *Fixup,
- IN OUT CHAR8 **FixupData,
- IN UINT64 Adjust
- );
-
-
-/**
- Performs an Itanium-based specific re-relocation fixup and is a no-op on other
- instruction sets. This is used to re-relocated the image into the EFI virtual
- space for runtime calls.
-
- @param Reloc Pointer to pointer to the relocation record.
- @param Fixup Pointer to the address to fix up.
- @param FixupData Pointer to a buffer to log the fixups.
- @param Adjust The offset to adjust the fixup.
-
- @return Status code.
-
-**/
-RETURN_STATUS
-PeHotRelocateImageEx (
- IN UINT16 **Reloc,
- IN OUT CHAR8 *Fixup,
- IN OUT CHAR8 **FixupData,
- IN UINT64 Adjust
- );
-
-
-/**
- Returns TRUE if the machine type of PE/COFF image is supported. Supported
- does not mean the image can be executed it means the PE/COFF loader supports
- loading and relocating of the image type. It's up to the caller to support
- the entry point.
-
- @param Machine Machine type from the PE Header.
-
- @return TRUE if this PE/COFF loader can load the image
-
-**/
-BOOLEAN
-PeCoffLoaderImageFormatSupported (
- IN UINT16 Machine
- );
-
-/**
- Retrieves the magic value from the PE/COFF header.
-
- @param Hdr The buffer in which to return the PE32, PE32+, or TE header.
-
- @return EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC - Image is PE32
- @return EFI_IMAGE_NT_OPTIONAL_HDR64_MAGIC - Image is PE32+
-
-**/
-UINT16
-PeCoffLoaderGetPeHeaderMagicValue (
- IN EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr
- );
-
-/**
- Retrieves the PE or TE Header from a PE/COFF or TE image.
-
- @param ImageContext The context of the image being loaded.
- @param Hdr The buffer in which to return the PE32, PE32+, or TE header.
-
- @retval RETURN_SUCCESS The PE or TE Header is read.
- @retval Other The error status from reading the PE/COFF or TE image using the ImageRead function.
-
-**/
-RETURN_STATUS
-PeCoffLoaderGetPeHeader (
- IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext,
- OUT EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr
- );
-
-/**
- Converts an image address to the loaded address.
-
- @param ImageContext The context of the image being loaded.
- @param Address The address to be converted to the loaded address.
-
- @return The converted address or NULL if the address can not be converted.
-
-**/
-VOID *
-PeCoffLoaderImageAddress (
- IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext,
- IN UINTN Address
- );
-
-#endif
diff --git a/ArmPkg/Library/BasePeCoffLib/Ipf/PeCoffLoaderEx.c b/ArmPkg/Library/BasePeCoffLib/Ipf/PeCoffLoaderEx.c deleted file mode 100755 index 5c92381311..0000000000 --- a/ArmPkg/Library/BasePeCoffLib/Ipf/PeCoffLoaderEx.c +++ /dev/null @@ -1,420 +0,0 @@ -/** @file
- Fixes Intel Itanium(TM) specific relocation types.
-
- Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "BasePeCoffLibInternals.h"
-
-
-
-#define EXT_IMM64(Value, Address, Size, InstPos, ValPos) \
- Value |= (((UINT64)((*(Address) >> InstPos) & (((UINT64)1 << Size) - 1))) << ValPos)
-
-#define INS_IMM64(Value, Address, Size, InstPos, ValPos) \
- *(UINT32*)Address = (*(UINT32*)Address & ~(((1 << Size) - 1) << InstPos)) | \
- ((UINT32)((((UINT64)Value >> ValPos) & (((UINT64)1 << Size) - 1))) << InstPos)
-
-#define IMM64_IMM7B_INST_WORD_X 3
-#define IMM64_IMM7B_SIZE_X 7
-#define IMM64_IMM7B_INST_WORD_POS_X 4
-#define IMM64_IMM7B_VAL_POS_X 0
-
-#define IMM64_IMM9D_INST_WORD_X 3
-#define IMM64_IMM9D_SIZE_X 9
-#define IMM64_IMM9D_INST_WORD_POS_X 18
-#define IMM64_IMM9D_VAL_POS_X 7
-
-#define IMM64_IMM5C_INST_WORD_X 3
-#define IMM64_IMM5C_SIZE_X 5
-#define IMM64_IMM5C_INST_WORD_POS_X 13
-#define IMM64_IMM5C_VAL_POS_X 16
-
-#define IMM64_IC_INST_WORD_X 3
-#define IMM64_IC_SIZE_X 1
-#define IMM64_IC_INST_WORD_POS_X 12
-#define IMM64_IC_VAL_POS_X 21
-
-#define IMM64_IMM41A_INST_WORD_X 1
-#define IMM64_IMM41A_SIZE_X 10
-#define IMM64_IMM41A_INST_WORD_POS_X 14
-#define IMM64_IMM41A_VAL_POS_X 22
-
-#define IMM64_IMM41B_INST_WORD_X 1
-#define IMM64_IMM41B_SIZE_X 8
-#define IMM64_IMM41B_INST_WORD_POS_X 24
-#define IMM64_IMM41B_VAL_POS_X 32
-
-#define IMM64_IMM41C_INST_WORD_X 2
-#define IMM64_IMM41C_SIZE_X 23
-#define IMM64_IMM41C_INST_WORD_POS_X 0
-#define IMM64_IMM41C_VAL_POS_X 40
-
-#define IMM64_SIGN_INST_WORD_X 3
-#define IMM64_SIGN_SIZE_X 1
-#define IMM64_SIGN_INST_WORD_POS_X 27
-#define IMM64_SIGN_VAL_POS_X 63
-
-/**
- Performs an Itanium-based specific relocation fixup.
-
- @param Reloc The pointer to the relocation record.
- @param Fixup The pointer to the address to fix up.
- @param FixupData The pointer to a buffer to log the fixups.
- @param Adjust The offset to adjust the fixup.
-
- @retval RETURN_SUCCESS Succeed to fix the relocation entry.
- @retval RETURN_UNSUPPOTED Unrecoganized relocation entry.
-
-**/
-RETURN_STATUS
-PeCoffLoaderRelocateImageEx (
- IN UINT16 **Reloc,
- IN OUT CHAR8 *Fixup,
- IN OUT CHAR8 **FixupData,
- IN UINT64 Adjust
- )
-{
- UINT64 *Fixup64;
- UINT64 FixupVal;
-
- switch ((**Reloc) >> 12) {
- case EFI_IMAGE_REL_BASED_IA64_IMM64:
-
- //
- // Align it to bundle address before fixing up the
- // 64-bit immediate value of the movl instruction.
- //
-
- Fixup = (CHAR8 *)((UINTN) Fixup & (UINTN) ~(15));
- FixupVal = (UINT64)0;
-
- //
- // Extract the lower 32 bits of IMM64 from bundle
- //
- EXT_IMM64(FixupVal,
- (UINT32 *)Fixup + IMM64_IMM7B_INST_WORD_X,
- IMM64_IMM7B_SIZE_X,
- IMM64_IMM7B_INST_WORD_POS_X,
- IMM64_IMM7B_VAL_POS_X
- );
-
- EXT_IMM64(FixupVal,
- (UINT32 *)Fixup + IMM64_IMM9D_INST_WORD_X,
- IMM64_IMM9D_SIZE_X,
- IMM64_IMM9D_INST_WORD_POS_X,
- IMM64_IMM9D_VAL_POS_X
- );
-
- EXT_IMM64(FixupVal,
- (UINT32 *)Fixup + IMM64_IMM5C_INST_WORD_X,
- IMM64_IMM5C_SIZE_X,
- IMM64_IMM5C_INST_WORD_POS_X,
- IMM64_IMM5C_VAL_POS_X
- );
-
- EXT_IMM64(FixupVal,
- (UINT32 *)Fixup + IMM64_IC_INST_WORD_X,
- IMM64_IC_SIZE_X,
- IMM64_IC_INST_WORD_POS_X,
- IMM64_IC_VAL_POS_X
- );
-
- EXT_IMM64(FixupVal,
- (UINT32 *)Fixup + IMM64_IMM41A_INST_WORD_X,
- IMM64_IMM41A_SIZE_X,
- IMM64_IMM41A_INST_WORD_POS_X,
- IMM64_IMM41A_VAL_POS_X
- );
-
- //
- // Update 64-bit address
- //
- FixupVal += Adjust;
-
- //
- // Insert IMM64 into bundle
- //
- INS_IMM64(FixupVal,
- ((UINT32 *)Fixup + IMM64_IMM7B_INST_WORD_X),
- IMM64_IMM7B_SIZE_X,
- IMM64_IMM7B_INST_WORD_POS_X,
- IMM64_IMM7B_VAL_POS_X
- );
-
- INS_IMM64(FixupVal,
- ((UINT32 *)Fixup + IMM64_IMM9D_INST_WORD_X),
- IMM64_IMM9D_SIZE_X,
- IMM64_IMM9D_INST_WORD_POS_X,
- IMM64_IMM9D_VAL_POS_X
- );
-
- INS_IMM64(FixupVal,
- ((UINT32 *)Fixup + IMM64_IMM5C_INST_WORD_X),
- IMM64_IMM5C_SIZE_X,
- IMM64_IMM5C_INST_WORD_POS_X,
- IMM64_IMM5C_VAL_POS_X
- );
-
- INS_IMM64(FixupVal,
- ((UINT32 *)Fixup + IMM64_IC_INST_WORD_X),
- IMM64_IC_SIZE_X,
- IMM64_IC_INST_WORD_POS_X,
- IMM64_IC_VAL_POS_X
- );
-
- INS_IMM64(FixupVal,
- ((UINT32 *)Fixup + IMM64_IMM41A_INST_WORD_X),
- IMM64_IMM41A_SIZE_X,
- IMM64_IMM41A_INST_WORD_POS_X,
- IMM64_IMM41A_VAL_POS_X
- );
-
- INS_IMM64(FixupVal,
- ((UINT32 *)Fixup + IMM64_IMM41B_INST_WORD_X),
- IMM64_IMM41B_SIZE_X,
- IMM64_IMM41B_INST_WORD_POS_X,
- IMM64_IMM41B_VAL_POS_X
- );
-
- INS_IMM64(FixupVal,
- ((UINT32 *)Fixup + IMM64_IMM41C_INST_WORD_X),
- IMM64_IMM41C_SIZE_X,
- IMM64_IMM41C_INST_WORD_POS_X,
- IMM64_IMM41C_VAL_POS_X
- );
-
- INS_IMM64(FixupVal,
- ((UINT32 *)Fixup + IMM64_SIGN_INST_WORD_X),
- IMM64_SIGN_SIZE_X,
- IMM64_SIGN_INST_WORD_POS_X,
- IMM64_SIGN_VAL_POS_X
- );
-
- Fixup64 = (UINT64 *) Fixup;
- if (*FixupData != NULL) {
- *FixupData = ALIGN_POINTER(*FixupData, sizeof(UINT64));
- *(UINT64 *)(*FixupData) = *Fixup64;
- *FixupData = *FixupData + sizeof(UINT64);
- }
- break;
-
- default:
- return RETURN_UNSUPPORTED;
- }
-
- return RETURN_SUCCESS;
-}
-
-/**
- Returns TRUE if the machine type of PE/COFF image is supported. Supported
- does not mean the image can be executed it means the PE/COFF loader supports
- loading and relocating of the image type. It's up to the caller to support
- the entry point.
-
- The itanium version PE/COFF loader/relocater supports itanium and EBC image.
-
- @param Machine Machine type from the PE Header.
-
- @return TRUE if this PE/COFF loader can load the image
- @return FALSE unrecoganized machine type of image.
-
-**/
-BOOLEAN
-PeCoffLoaderImageFormatSupported (
- IN UINT16 Machine
- )
-{
- if ((Machine == IMAGE_FILE_MACHINE_IA64) || (Machine == IMAGE_FILE_MACHINE_EBC)) {
- return TRUE;
- }
-
- return FALSE;
-}
-
-
-/**
- Performs an Itanium-based specific relocation fixup and is a no-op on other
- instruction sets.
-
- @param Reloc Pointer to Pointer to the relocation record.
- @param Fixup Pointer to the address to fix up.
- @param FixupData Pointer to a buffer to log the fixups.
- @param Adjust The offset to adjust the fixup.
-
- @return Status code.
-
-**/
-RETURN_STATUS
-PeHotRelocateImageEx (
- IN UINT16 **Reloc,
- IN OUT CHAR8 *Fixup,
- IN OUT CHAR8 **FixupData,
- IN UINT64 Adjust
- )
-{
- UINT64 *Fixup64;
- UINT64 FixupVal;
-
- switch ((**Reloc) >> 12) {
- case EFI_IMAGE_REL_BASED_DIR64:
- Fixup64 = (UINT64 *) Fixup;
- *FixupData = ALIGN_POINTER (*FixupData, sizeof (UINT64));
- if (*(UINT64 *) (*FixupData) == *Fixup64) {
- *Fixup64 = *Fixup64 + (UINT64) Adjust;
- }
-
- *FixupData = *FixupData + sizeof (UINT64);
- break;
-
- case EFI_IMAGE_REL_BASED_IA64_IMM64:
- Fixup64 = (UINT64 *) Fixup;
- *FixupData = ALIGN_POINTER (*FixupData, sizeof (UINT64));
- if (*(UINT64 *) (*FixupData) == *Fixup64) {
- //
- // Align it to bundle address before fixing up the
- // 64-bit immediate value of the movl instruction.
- //
- //
- Fixup = (CHAR8 *) ((UINT64) Fixup & (UINT64)~(15));
- FixupVal = (UINT64) 0;
-
- //
- // Extract the lower 32 bits of IMM64 from bundle
- //
- EXT_IMM64 (
- FixupVal,
- (UINT32 *) Fixup + IMM64_IMM7B_INST_WORD_X,
- IMM64_IMM7B_SIZE_X,
- IMM64_IMM7B_INST_WORD_POS_X,
- IMM64_IMM7B_VAL_POS_X
- );
-
- EXT_IMM64 (
- FixupVal,
- (UINT32 *) Fixup + IMM64_IMM9D_INST_WORD_X,
- IMM64_IMM9D_SIZE_X,
- IMM64_IMM9D_INST_WORD_POS_X,
- IMM64_IMM9D_VAL_POS_X
- );
-
- EXT_IMM64 (
- FixupVal,
- (UINT32 *) Fixup + IMM64_IMM5C_INST_WORD_X,
- IMM64_IMM5C_SIZE_X,
- IMM64_IMM5C_INST_WORD_POS_X,
- IMM64_IMM5C_VAL_POS_X
- );
-
- EXT_IMM64 (
- FixupVal,
- (UINT32 *) Fixup + IMM64_IC_INST_WORD_X,
- IMM64_IC_SIZE_X,
- IMM64_IC_INST_WORD_POS_X,
- IMM64_IC_VAL_POS_X
- );
-
- EXT_IMM64 (
- FixupVal,
- (UINT32 *) Fixup + IMM64_IMM41A_INST_WORD_X,
- IMM64_IMM41A_SIZE_X,
- IMM64_IMM41A_INST_WORD_POS_X,
- IMM64_IMM41A_VAL_POS_X
- );
-
- //
- // Update 64-bit address
- //
- FixupVal += Adjust;
-
- //
- // Insert IMM64 into bundle
- //
- INS_IMM64 (
- FixupVal,
- ((UINT32 *) Fixup + IMM64_IMM7B_INST_WORD_X),
- IMM64_IMM7B_SIZE_X,
- IMM64_IMM7B_INST_WORD_POS_X,
- IMM64_IMM7B_VAL_POS_X
- );
-
- INS_IMM64 (
- FixupVal,
- ((UINT32 *) Fixup + IMM64_IMM9D_INST_WORD_X),
- IMM64_IMM9D_SIZE_X,
- IMM64_IMM9D_INST_WORD_POS_X,
- IMM64_IMM9D_VAL_POS_X
- );
-
- INS_IMM64 (
- FixupVal,
- ((UINT32 *) Fixup + IMM64_IMM5C_INST_WORD_X),
- IMM64_IMM5C_SIZE_X,
- IMM64_IMM5C_INST_WORD_POS_X,
- IMM64_IMM5C_VAL_POS_X
- );
-
- INS_IMM64 (
- FixupVal,
- ((UINT32 *) Fixup + IMM64_IC_INST_WORD_X),
- IMM64_IC_SIZE_X,
- IMM64_IC_INST_WORD_POS_X,
- IMM64_IC_VAL_POS_X
- );
-
- INS_IMM64 (
- FixupVal,
- ((UINT32 *) Fixup + IMM64_IMM41A_INST_WORD_X),
- IMM64_IMM41A_SIZE_X,
- IMM64_IMM41A_INST_WORD_POS_X,
- IMM64_IMM41A_VAL_POS_X
- );
-
- INS_IMM64 (
- FixupVal,
- ((UINT32 *) Fixup + IMM64_IMM41B_INST_WORD_X),
- IMM64_IMM41B_SIZE_X,
- IMM64_IMM41B_INST_WORD_POS_X,
- IMM64_IMM41B_VAL_POS_X
- );
-
- INS_IMM64 (
- FixupVal,
- ((UINT32 *) Fixup + IMM64_IMM41C_INST_WORD_X),
- IMM64_IMM41C_SIZE_X,
- IMM64_IMM41C_INST_WORD_POS_X,
- IMM64_IMM41C_VAL_POS_X
- );
-
- INS_IMM64 (
- FixupVal,
- ((UINT32 *) Fixup + IMM64_SIGN_INST_WORD_X),
- IMM64_SIGN_SIZE_X,
- IMM64_SIGN_INST_WORD_POS_X,
- IMM64_SIGN_VAL_POS_X
- );
-
- *(UINT64 *) (*FixupData) = *Fixup64;
- }
-
- *FixupData = *FixupData + sizeof (UINT64);
- break;
-
- default:
- DEBUG ((EFI_D_ERROR, "PeHotRelocateEx:unknown fixed type\n"));
- return RETURN_UNSUPPORTED;
- }
-
- return RETURN_SUCCESS;
-}
-
-
-
diff --git a/ArmPkg/Library/BasePeCoffLib/PeCoffLoaderEx.c b/ArmPkg/Library/BasePeCoffLib/PeCoffLoaderEx.c deleted file mode 100755 index cd54c1cd07..0000000000 --- a/ArmPkg/Library/BasePeCoffLib/PeCoffLoaderEx.c +++ /dev/null @@ -1,90 +0,0 @@ -/** @file
- Specific relocation fixups for none Itanium architecture.
-
- Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "BasePeCoffLibInternals.h"
-
-
-/**
- Performs an Itanium-based specific relocation fixup and is a no-op on other
- instruction sets.
-
- @param Reloc The pointer to the relocation record.
- @param Fixup The pointer to the address to fix up.
- @param FixupData The pointer to a buffer to log the fixups.
- @param Adjust The offset to adjust the fixup.
-
- @return Status code.
-
-**/
-RETURN_STATUS
-PeCoffLoaderRelocateImageEx (
- IN UINT16 **Reloc,
- IN OUT CHAR8 *Fixup,
- IN OUT CHAR8 **FixupData,
- IN UINT64 Adjust
- )
-{
- return RETURN_UNSUPPORTED;
-}
-
-/**
- Returns TRUE if the machine type of PE/COFF image is supported. Supported
- does not mean the image can be executed it means the PE/COFF loader supports
- loading and relocating of the image type. It's up to the caller to support
- the entry point.
-
- The IA32/X64 version PE/COFF loader/relocater both support IA32, X64 and EBC images.
-
- @param Machine The machine type from the PE Header.
-
- @return TRUE if this PE/COFF loader can load the image
-
-**/
-BOOLEAN
-PeCoffLoaderImageFormatSupported (
- IN UINT16 Machine
- )
-{
- if ((Machine == IMAGE_FILE_MACHINE_I386) || (Machine == IMAGE_FILE_MACHINE_X64) ||
- (Machine == IMAGE_FILE_MACHINE_EBC)) {
- return TRUE;
- }
-
- return FALSE;
-}
-
-/**
- Performs an Itanium-based specific re-relocation fixup and is a no-op on other
- instruction sets. This is used to re-relocated the image into the EFI virtual
- space for runtime calls.
-
- @param Reloc Pointer to pointer to the relocation record.
- @param Fixup Pointer to the address to fix up.
- @param FixupData Pointer to a buffer to log the fixups.
- @param Adjust The offset to adjust the fixup.
-
- @return Status code.
-
-**/
-RETURN_STATUS
-PeHotRelocateImageEx (
- IN UINT16 **Reloc,
- IN OUT CHAR8 *Fixup,
- IN OUT CHAR8 **FixupData,
- IN UINT64 Adjust
- )
-{
- return RETURN_UNSUPPORTED;
-}
-
|