diff options
Diffstat (limited to 'ArmPlatformPkg')
| -rw-r--r-- | ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.c | 68 | ||||
| -rw-r--r-- | ArmPlatformPkg/Include/Drivers/PL011Uart.h | 36 | ||||
| -rw-r--r-- | ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.c | 32 |
3 files changed, 95 insertions, 41 deletions
diff --git a/ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.c b/ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.c index fd686799b2..a40e269d07 100644 --- a/ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.c +++ b/ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.c @@ -2,7 +2,7 @@ Serial I/O Port library functions with no library constructor/destructor
Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
- Copyright (c) 2011 - 2013, ARM Ltd. All rights reserved.<BR>
+ Copyright (c) 2011 - 2014, ARM Ltd. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -20,6 +20,12 @@ #include <Drivers/PL011Uart.h>
+//
+// EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE is the only
+// control bit that is not supported.
+//
+STATIC CONST UINT32 mInvalidControlBits = EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE;
+
/*
Initialise the serial port to the specified settings.
@@ -159,53 +165,69 @@ PL011UartInitializePort ( }
/**
- Set the serial device control bits.
- @param UartBase The base address of the PL011 UART.
- @param Control Control bits which are to be set on the serial device.
-
- @retval EFI_SUCCESS The new control bits were set on the serial device.
- @retval EFI_UNSUPPORTED The serial device does not support this operation.
- @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
+ Assert or deassert the control signals on a serial port.
+ The following control signals are set according their bit settings :
+ . Request to Send
+ . Data Terminal Ready
+
+ @param[in] UartBase UART registers base address
+ @param[in] Control The following bits are taken into account :
+ . EFI_SERIAL_REQUEST_TO_SEND : assert/deassert the
+ "Request To Send" control signal if this bit is
+ equal to one/zero.
+ . EFI_SERIAL_DATA_TERMINAL_READY : assert/deassert
+ the "Data Terminal Ready" control signal if this
+ bit is equal to one/zero.
+ . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : enable/disable
+ the hardware loopback if this bit is equal to
+ one/zero.
+ . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : not supported.
+ . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : enable/
+ disable the hardware flow control based on CTS (Clear
+ To Send) and RTS (Ready To Send) control signals.
+
+ @retval RETURN_SUCCESS The new control bits were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
**/
RETURN_STATUS
EFIAPI
PL011UartSetControl (
- IN UINTN UartBase,
- IN UINT32 Control
+ IN UINTN UartBase,
+ IN UINT32 Control
)
{
- UINT32 Bits;
- UINT32 ValidControlBits;
-
- ValidControlBits = ( EFI_SERIAL_REQUEST_TO_SEND
- | EFI_SERIAL_DATA_TERMINAL_READY
- // | EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE // Not implemented yet.
- // | EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE // Not implemented yet.
- | EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE
- );
-
- if (Control & (~ValidControlBits)) {
- return EFI_UNSUPPORTED;
+ UINT32 Bits;
+
+ if (Control & (mInvalidControlBits)) {
+ return RETURN_UNSUPPORTED;
}
Bits = MmioRead32 (UartBase + UARTCR);
if (Control & EFI_SERIAL_REQUEST_TO_SEND) {
Bits |= PL011_UARTCR_RTS;
+ } else {
+ Bits &= ~PL011_UARTCR_RTS;
}
if (Control & EFI_SERIAL_DATA_TERMINAL_READY) {
Bits |= PL011_UARTCR_DTR;
+ } else {
+ Bits &= ~PL011_UARTCR_DTR;
}
if (Control & EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE) {
Bits |= PL011_UARTCR_LBE;
+ } else {
+ Bits &= ~PL011_UARTCR_LBE;
}
if (Control & EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE) {
- Bits |= (PL011_UARTCR_CTSEN & PL011_UARTCR_RTSEN);
+ Bits |= (PL011_UARTCR_CTSEN | PL011_UARTCR_RTSEN);
+ } else {
+ Bits &= ~(PL011_UARTCR_CTSEN | PL011_UARTCR_RTSEN);
}
MmioWrite32 (UartBase + UARTCR, Bits);
diff --git a/ArmPlatformPkg/Include/Drivers/PL011Uart.h b/ArmPlatformPkg/Include/Drivers/PL011Uart.h index a36347e529..f8e4a083aa 100644 --- a/ArmPlatformPkg/Include/Drivers/PL011Uart.h +++ b/ArmPlatformPkg/Include/Drivers/PL011Uart.h @@ -1,6 +1,6 @@ /** @file
*
-* Copyright (c) 2011-2012, ARM Limited. All rights reserved.
+* Copyright (c) 2011-2014, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
@@ -100,21 +100,37 @@ PL011UartInitializePort ( );
/**
- Set the serial device control bits.
- @param UartBase The base address of the PL011 UART.
- @param Control Control bits which are to be set on the serial device.
-
- @retval EFI_SUCCESS The new control bits were set on the serial device.
- @retval EFI_UNSUPPORTED The serial device does not support this operation.
- @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
+ Assert or deassert the control signals on a serial port.
+ The following control signals are set according their bit settings :
+ . Request to Send
+ . Data Terminal Ready
+
+ @param[in] UartBase UART registers base address
+ @param[in] Control The following bits are taken into account :
+ . EFI_SERIAL_REQUEST_TO_SEND : assert/deassert the
+ "Request To Send" control signal if this bit is
+ equal to one/zero.
+ . EFI_SERIAL_DATA_TERMINAL_READY : assert/deassert
+ the "Data Terminal Ready" control signal if this
+ bit is equal to one/zero.
+ . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : enable/disable
+ the hardware loopback if this bit is equal to
+ one/zero.
+ . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : not supported.
+ . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : enable/
+ disable the hardware flow control based on CTS (Clear
+ To Send) and RTS (Ready To Send) control signals.
+
+ @retval RETURN_SUCCESS The new control bits were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
**/
RETURN_STATUS
EFIAPI
PL011UartSetControl (
- IN UINTN UartBase,
- IN UINT32 Control
+ IN UINTN UartBase,
+ IN UINT32 Control
);
/**
diff --git a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.c b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.c index 723a1b1624..7b3cd89298 100644 --- a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.c +++ b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.c @@ -1,7 +1,7 @@ /** @file
Serial I/O Port library functions with no library constructor/destructor
- Copyright (c) 2012-2013, ARM Ltd. All rights reserved.<BR>
+ Copyright (c) 2012-2014, ARM Ltd. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -65,19 +65,35 @@ SerialPortSetAttributes ( }
/**
- Set the serial device control bits.
- @param Control Control bits which are to be set on the serial device.
-
- @retval EFI_SUCCESS The new control bits were set on the serial device.
- @retval EFI_UNSUPPORTED The serial device does not support this operation.
- @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
+ Assert or deassert the control signals on a serial port.
+ The following control signals are set according their bit settings :
+ . Request to Send
+ . Data Terminal Ready
+
+ @param[in] Control The following bits are taken into account :
+ . EFI_SERIAL_REQUEST_TO_SEND : assert/deassert the
+ "Request To Send" control signal if this bit is
+ equal to one/zero.
+ . EFI_SERIAL_DATA_TERMINAL_READY : assert/deassert
+ the "Data Terminal Ready" control signal if this
+ bit is equal to one/zero.
+ . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : enable/disable
+ the hardware loopback if this bit is equal to
+ one/zero.
+ . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : not supported.
+ . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : enable/
+ disable the hardware flow control based on CTS (Clear
+ To Send) and RTS (Ready To Send) control signals.
+
+ @retval RETURN_SUCCESS The new control bits were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
**/
RETURN_STATUS
EFIAPI
SerialPortSetControl (
- IN UINT32 Control
+ IN UINT32 Control
)
{
return PL011UartSetControl ((UINTN)PcdGet64 (PcdSerialRegisterBase), Control);
|