diff options
Diffstat (limited to 'Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru')
-rw-r--r-- | Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c | 2522 | ||||
-rw-r--r-- | Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.h | 370 | ||||
-rw-r--r-- | Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.c | 2604 | ||||
-rw-r--r-- | Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h | 1300 | ||||
-rw-r--r-- | Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf | 78 | ||||
-rw-r--r-- | Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxe.uni | bin | 0 -> 2160 bytes | |||
-rw-r--r-- | Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxeExtra.uni | bin | 0 -> 1372 bytes | |||
-rw-r--r-- | Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/ComponentName.c | 251 | ||||
-rw-r--r-- | Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c | 2890 | ||||
-rw-r--r-- | Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.h | 204 |
10 files changed, 10219 insertions, 0 deletions
diff --git a/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c new file mode 100644 index 0000000000..4d1b5848a5 --- /dev/null +++ b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c @@ -0,0 +1,2522 @@ +/** @file
+ The file for AHCI mode of ATA host controller.
+
+ Copyright (c) 2010 - 2014, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "AtaAtapiPassThru.h"
+
+/**
+ Read AHCI Operation register.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Offset The operation register offset.
+
+ @return The register content read.
+
+**/
+UINT32
+EFIAPI
+AhciReadReg (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT32 Offset
+ )
+{
+ UINT32 Data;
+
+ ASSERT (PciIo != NULL);
+
+ Data = 0;
+
+ PciIo->Mem.Read (
+ PciIo,
+ EfiPciIoWidthUint32,
+ EFI_AHCI_BAR_INDEX,
+ (UINT64) Offset,
+ 1,
+ &Data
+ );
+
+ return Data;
+}
+
+/**
+ Write AHCI Operation register.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Offset The operation register offset.
+ @param Data The data used to write down.
+
+**/
+VOID
+EFIAPI
+AhciWriteReg (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT32 Offset,
+ IN UINT32 Data
+ )
+{
+ ASSERT (PciIo != NULL);
+
+ PciIo->Mem.Write (
+ PciIo,
+ EfiPciIoWidthUint32,
+ EFI_AHCI_BAR_INDEX,
+ (UINT64) Offset,
+ 1,
+ &Data
+ );
+
+ return ;
+}
+
+/**
+ Do AND operation with the value of AHCI Operation register.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Offset The operation register offset.
+ @param AndData The data used to do AND operation.
+
+**/
+VOID
+EFIAPI
+AhciAndReg (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT32 Offset,
+ IN UINT32 AndData
+ )
+{
+ UINT32 Data;
+
+ ASSERT (PciIo != NULL);
+
+ Data = AhciReadReg (PciIo, Offset);
+
+ Data &= AndData;
+
+ AhciWriteReg (PciIo, Offset, Data);
+}
+
+/**
+ Do OR operation with the value of AHCI Operation register.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Offset The operation register offset.
+ @param OrData The data used to do OR operation.
+
+**/
+VOID
+EFIAPI
+AhciOrReg (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT32 Offset,
+ IN UINT32 OrData
+ )
+{
+ UINT32 Data;
+
+ ASSERT (PciIo != NULL);
+
+ Data = AhciReadReg (PciIo, Offset);
+
+ Data |= OrData;
+
+ AhciWriteReg (PciIo, Offset, Data);
+}
+
+/**
+ Wait for the value of the specified MMIO register set to the test value.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Offset The MMIO address to test.
+ @param MaskValue The mask value of memory.
+ @param TestValue The test value of memory.
+ @param Timeout The time out value for wait memory set, uses 100ns as a unit.
+
+ @retval EFI_TIMEOUT The MMIO setting is time out.
+ @retval EFI_SUCCESS The MMIO is correct set.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciWaitMmioSet (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINTN Offset,
+ IN UINT32 MaskValue,
+ IN UINT32 TestValue,
+ IN UINT64 Timeout
+ )
+{
+ UINT32 Value;
+ UINT64 Delay;
+ BOOLEAN InfiniteWait;
+
+ if (Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+
+ Delay = DivU64x32 (Timeout, 1000) + 1;
+
+ do {
+ //
+ // Access PCI MMIO space to see if the value is the tested one.
+ //
+ Value = AhciReadReg (PciIo, (UINT32) Offset) & MaskValue;
+
+ if (Value == TestValue) {
+ return EFI_SUCCESS;
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay (100);
+
+ Delay--;
+
+ } while (InfiniteWait || (Delay > 0));
+
+ return EFI_TIMEOUT;
+}
+
+/**
+ Wait for the value of the specified system memory set to the test value.
+
+ @param Address The system memory address to test.
+ @param MaskValue The mask value of memory.
+ @param TestValue The test value of memory.
+ @param Timeout The time out value for wait memory set, uses 100ns as a unit.
+
+ @retval EFI_TIMEOUT The system memory setting is time out.
+ @retval EFI_SUCCESS The system memory is correct set.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciWaitMemSet (
+ IN EFI_PHYSICAL_ADDRESS Address,
+ IN UINT32 MaskValue,
+ IN UINT32 TestValue,
+ IN UINT64 Timeout
+ )
+{
+ UINT32 Value;
+ UINT64 Delay;
+ BOOLEAN InfiniteWait;
+
+ if (Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+
+ Delay = DivU64x32 (Timeout, 1000) + 1;
+
+ do {
+ //
+ // Access sytem memory to see if the value is the tested one.
+ //
+ // The system memory pointed by Address will be updated by the
+ // SATA Host Controller, "volatile" is introduced to prevent
+ // compiler from optimizing the access to the memory address
+ // to only read once.
+ //
+ Value = *(volatile UINT32 *) (UINTN) Address;
+ Value &= MaskValue;
+
+ if (Value == TestValue) {
+ return EFI_SUCCESS;
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay (100);
+
+ Delay--;
+
+ } while (InfiniteWait || (Delay > 0));
+
+ return EFI_TIMEOUT;
+}
+
+/**
+ Check the memory status to the test value.
+
+ @param[in] Address The memory address to test.
+ @param[in] MaskValue The mask value of memory.
+ @param[in] TestValue The test value of memory.
+ @param[in, out] Task Optional. Pointer to the ATA_NONBLOCK_TASK used by
+ non-blocking mode. If NULL, then just try once.
+
+ @retval EFI_NOTREADY The memory is not set.
+ @retval EFI_TIMEOUT The memory setting retry times out.
+ @retval EFI_SUCCESS The memory is correct set.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciCheckMemSet (
+ IN UINTN Address,
+ IN UINT32 MaskValue,
+ IN UINT32 TestValue,
+ IN OUT ATA_NONBLOCK_TASK *Task
+ )
+{
+ UINT32 Value;
+
+ if (Task != NULL) {
+ Task->RetryTimes--;
+ }
+
+ Value = *(volatile UINT32 *) Address;
+ Value &= MaskValue;
+
+ if (Value == TestValue) {
+ return EFI_SUCCESS;
+ }
+
+ if ((Task != NULL) && !Task->InfiniteWait && (Task->RetryTimes == 0)) {
+ return EFI_TIMEOUT;
+ } else {
+ return EFI_NOT_READY;
+ }
+}
+
+/**
+ Check if the device is still on port. It also checks if the AHCI controller
+ supports the address and data count will be transferred.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Port The number of port.
+
+ @retval EFI_SUCCESS The device is attached to port and the transfer data is
+ supported by AHCI controller.
+ @retval EFI_UNSUPPORTED The transfer address and count is not supported by AHCI
+ controller.
+ @retval EFI_NOT_READY The physical communication between AHCI controller and device
+ is not ready.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciCheckDeviceStatus (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Port
+ )
+{
+ UINT32 Data;
+ UINT32 Offset;
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SSTS;
+
+ Data = AhciReadReg (PciIo, Offset) & EFI_AHCI_PORT_SSTS_DET_MASK;
+
+ if (Data == EFI_AHCI_PORT_SSTS_DET_PCE) {
+ return EFI_SUCCESS;
+ }
+
+ return EFI_NOT_READY;
+}
+
+/**
+
+ Clear the port interrupt and error status. It will also clear
+ HBA interrupt status.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Port The number of port.
+
+**/
+VOID
+EFIAPI
+AhciClearPortStatus (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Port
+ )
+{
+ UINT32 Offset;
+
+ //
+ // Clear any error status
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR;
+ AhciWriteReg (PciIo, Offset, AhciReadReg (PciIo, Offset));
+
+ //
+ // Clear any port interrupt status
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IS;
+ AhciWriteReg (PciIo, Offset, AhciReadReg (PciIo, Offset));
+
+ //
+ // Clear any HBA interrupt status
+ //
+ AhciWriteReg (PciIo, EFI_AHCI_IS_OFFSET, AhciReadReg (PciIo, EFI_AHCI_IS_OFFSET));
+}
+
+/**
+ This function is used to dump the Status Registers and if there is ERR bit set
+ in the Status Register, the Error Register's value is also be dumped.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Port The number of port.
+ @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+
+**/
+VOID
+EFIAPI
+AhciDumpPortStatus (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Port,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
+ )
+{
+ UINT32 Offset;
+ UINT32 Data;
+
+ ASSERT (PciIo != NULL);
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
+ Data = AhciReadReg (PciIo, Offset);
+
+ if (AtaStatusBlock != NULL) {
+ ZeroMem (AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
+
+ AtaStatusBlock->AtaStatus = (UINT8)Data;
+ if ((AtaStatusBlock->AtaStatus & BIT0) != 0) {
+ AtaStatusBlock->AtaError = (UINT8)(Data >> 8);
+ }
+ }
+}
+
+
+/**
+ Enable the FIS running for giving port.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Port The number of port.
+ @param Timeout The timeout value of enabling FIS, uses 100ns as a unit.
+
+ @retval EFI_DEVICE_ERROR The FIS enable setting fails.
+ @retval EFI_TIMEOUT The FIS enable setting is time out.
+ @retval EFI_SUCCESS The FIS enable successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciEnableFisReceive (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Port,
+ IN UINT64 Timeout
+ )
+{
+ UINT32 Offset;
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_FRE);
+
+ return AhciWaitMmioSet (
+ PciIo,
+ Offset,
+ EFI_AHCI_PORT_CMD_FR,
+ EFI_AHCI_PORT_CMD_FR,
+ Timeout
+ );
+}
+
+/**
+ Disable the FIS running for giving port.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Port The number of port.
+ @param Timeout The timeout value of disabling FIS, uses 100ns as a unit.
+
+ @retval EFI_DEVICE_ERROR The FIS disable setting fails.
+ @retval EFI_TIMEOUT The FIS disable setting is time out.
+ @retval EFI_UNSUPPORTED The port is in running state.
+ @retval EFI_SUCCESS The FIS disable successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciDisableFisReceive (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Port,
+ IN UINT64 Timeout
+ )
+{
+ UINT32 Offset;
+ UINT32 Data;
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ Data = AhciReadReg (PciIo, Offset);
+
+ //
+ // Before disabling Fis receive, the DMA engine of the port should NOT be in running status.
+ //
+ if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) != 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ //
+ // Check if the Fis receive DMA engine for the port is running.
+ //
+ if ((Data & EFI_AHCI_PORT_CMD_FR) != EFI_AHCI_PORT_CMD_FR) {
+ return EFI_SUCCESS;
+ }
+
+ AhciAndReg (PciIo, Offset, (UINT32)~(EFI_AHCI_PORT_CMD_FRE));
+
+ return AhciWaitMmioSet (
+ PciIo,
+ Offset,
+ EFI_AHCI_PORT_CMD_FR,
+ 0,
+ Timeout
+ );
+}
+
+
+
+/**
+ Build the command list, command table and prepare the fis receiver.
+
+ @param PciIo The PCI IO protocol instance.
+ @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param Port The number of port.
+ @param PortMultiplier The timeout value of stop.
+ @param CommandFis The control fis will be used for the transfer.
+ @param CommandList The command list will be used for the transfer.
+ @param AtapiCommand The atapi command will be used for the transfer.
+ @param AtapiCommandLength The length of the atapi command.
+ @param CommandSlotNumber The command slot will be used for the transfer.
+ @param DataPhysicalAddr The pointer to the data buffer pci bus master address.
+ @param DataLength The data count to be transferred.
+
+**/
+VOID
+EFIAPI
+AhciBuildCommand (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_AHCI_COMMAND_FIS *CommandFis,
+ IN EFI_AHCI_COMMAND_LIST *CommandList,
+ IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
+ IN UINT8 AtapiCommandLength,
+ IN UINT8 CommandSlotNumber,
+ IN OUT VOID *DataPhysicalAddr,
+ IN UINT32 DataLength
+ )
+{
+ UINT64 BaseAddr;
+ UINT32 PrdtNumber;
+ UINT32 PrdtIndex;
+ UINTN RemainedData;
+ UINTN MemAddr;
+ DATA_64 Data64;
+ UINT32 Offset;
+
+ //
+ // Filling the PRDT
+ //
+ PrdtNumber = (UINT32)DivU64x32 (((UINT64)DataLength + EFI_AHCI_MAX_DATA_PER_PRDT - 1), EFI_AHCI_MAX_DATA_PER_PRDT);
+
+ //
+ // According to AHCI 1.3 spec, a PRDT entry can point to a maximum 4MB data block.
+ // It also limits that the maximum amount of the PRDT entry in the command table
+ // is 65535.
+ //
+ ASSERT (PrdtNumber <= 65535);
+
+ Data64.Uint64 = (UINTN) (AhciRegisters->AhciRFis) + sizeof (EFI_AHCI_RECEIVED_FIS) * Port;
+
+ BaseAddr = Data64.Uint64;
+
+ ZeroMem ((VOID *)((UINTN) BaseAddr), sizeof (EFI_AHCI_RECEIVED_FIS));
+
+ ZeroMem (AhciRegisters->AhciCommandTable, sizeof (EFI_AHCI_COMMAND_TABLE));
+
+ CommandFis->AhciCFisPmNum = PortMultiplier;
+
+ CopyMem (&AhciRegisters->AhciCommandTable->CommandFis, CommandFis, sizeof (EFI_AHCI_COMMAND_FIS));
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ if (AtapiCommand != NULL) {
+ CopyMem (
+ &AhciRegisters->AhciCommandTable->AtapiCmd,
+ AtapiCommand,
+ AtapiCommandLength
+ );
+
+ CommandList->AhciCmdA = 1;
+ CommandList->AhciCmdP = 1;
+
+ AhciOrReg (PciIo, Offset, (EFI_AHCI_PORT_CMD_DLAE | EFI_AHCI_PORT_CMD_ATAPI));
+ } else {
+ AhciAndReg (PciIo, Offset, (UINT32)~(EFI_AHCI_PORT_CMD_DLAE | EFI_AHCI_PORT_CMD_ATAPI));
+ }
+
+ RemainedData = (UINTN) DataLength;
+ MemAddr = (UINTN) DataPhysicalAddr;
+ CommandList->AhciCmdPrdtl = PrdtNumber;
+
+ for (PrdtIndex = 0; PrdtIndex < PrdtNumber; PrdtIndex++) {
+ if (RemainedData < EFI_AHCI_MAX_DATA_PER_PRDT) {
+ AhciRegisters->AhciCommandTable->PrdtTable[PrdtIndex].AhciPrdtDbc = (UINT32)RemainedData - 1;
+ } else {
+ AhciRegisters->AhciCommandTable->PrdtTable[PrdtIndex].AhciPrdtDbc = EFI_AHCI_MAX_DATA_PER_PRDT - 1;
+ }
+
+ Data64.Uint64 = (UINT64)MemAddr;
+ AhciRegisters->AhciCommandTable->PrdtTable[PrdtIndex].AhciPrdtDba = Data64.Uint32.Lower32;
+ AhciRegisters->AhciCommandTable->PrdtTable[PrdtIndex].AhciPrdtDbau = Data64.Uint32.Upper32;
+ RemainedData -= EFI_AHCI_MAX_DATA_PER_PRDT;
+ MemAddr += EFI_AHCI_MAX_DATA_PER_PRDT;
+ }
+
+ //
+ // Set the last PRDT to Interrupt On Complete
+ //
+ if (PrdtNumber > 0) {
+ AhciRegisters->AhciCommandTable->PrdtTable[PrdtNumber - 1].AhciPrdtIoc = 1;
+ }
+
+ CopyMem (
+ (VOID *) ((UINTN) AhciRegisters->AhciCmdList + (UINTN) CommandSlotNumber * sizeof (EFI_AHCI_COMMAND_LIST)),
+ CommandList,
+ sizeof (EFI_AHCI_COMMAND_LIST)
+ );
+
+ Data64.Uint64 = (UINT64)(UINTN) AhciRegisters->AhciCommandTablePciAddr;
+ AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtba = Data64.Uint32.Lower32;
+ AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtbau = Data64.Uint32.Upper32;
+ AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdPmp = PortMultiplier;
+
+}
+
+/**
+ Buid a command FIS.
+
+ @param CmdFis A pointer to the EFI_AHCI_COMMAND_FIS data structure.
+ @param AtaCommandBlock A pointer to the AhciBuildCommandFis data structure.
+
+**/
+VOID
+EFIAPI
+AhciBuildCommandFis (
+ IN OUT EFI_AHCI_COMMAND_FIS *CmdFis,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock
+ )
+{
+ ZeroMem (CmdFis, sizeof (EFI_AHCI_COMMAND_FIS));
+
+ CmdFis->AhciCFisType = EFI_AHCI_FIS_REGISTER_H2D;
+ //
+ // Indicator it's a command
+ //
+ CmdFis->AhciCFisCmdInd = 0x1;
+ CmdFis->AhciCFisCmd = AtaCommandBlock->AtaCommand;
+
+ CmdFis->AhciCFisFeature = AtaCommandBlock->AtaFeatures;
+ CmdFis->AhciCFisFeatureExp = AtaCommandBlock->AtaFeaturesExp;
+
+ CmdFis->AhciCFisSecNum = AtaCommandBlock->AtaSectorNumber;
+ CmdFis->AhciCFisSecNumExp = AtaCommandBlock->AtaSectorNumberExp;
+
+ CmdFis->AhciCFisClyLow = AtaCommandBlock->AtaCylinderLow;
+ CmdFis->AhciCFisClyLowExp = AtaCommandBlock->AtaCylinderLowExp;
+
+ CmdFis->AhciCFisClyHigh = AtaCommandBlock->AtaCylinderHigh;
+ CmdFis->AhciCFisClyHighExp = AtaCommandBlock->AtaCylinderHighExp;
+
+ CmdFis->AhciCFisSecCount = AtaCommandBlock->AtaSectorCount;
+ CmdFis->AhciCFisSecCountExp = AtaCommandBlock->AtaSectorCountExp;
+
+ CmdFis->AhciCFisDevHead = (UINT8) (AtaCommandBlock->AtaDeviceHead | 0xE0);
+}
+
+/**
+ Start a PIO data transfer on specific port.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param[in] Port The number of port.
+ @param[in] PortMultiplier The timeout value of stop.
+ @param[in] AtapiCommand The atapi command will be used for the
+ transfer.
+ @param[in] AtapiCommandLength The length of the atapi command.
+ @param[in] Read The transfer direction.
+ @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data.
+ @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data.
+ @param[in, out] MemoryAddr The pointer to the data buffer.
+ @param[in] DataCount The data count to be transferred.
+ @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_DEVICE_ERROR The PIO data transfer abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for transfer.
+ @retval EFI_SUCCESS The PIO data transfer executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciPioTransfer (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
+ IN UINT8 AtapiCommandLength,
+ IN BOOLEAN Read,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN OUT VOID *MemoryAddr,
+ IN UINT32 DataCount,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ )
+{
+ EFI_STATUS Status;
+ UINTN FisBaseAddr;
+ UINTN Offset;
+ EFI_PHYSICAL_ADDRESS PhyAddr;
+ VOID *Map;
+ UINTN MapLength;
+ EFI_PCI_IO_PROTOCOL_OPERATION Flag;
+ UINT64 Delay;
+ EFI_AHCI_COMMAND_FIS CFis;
+ EFI_AHCI_COMMAND_LIST CmdList;
+ UINT32 PortTfd;
+ UINT32 PrdCount;
+ BOOLEAN InfiniteWait;
+ BOOLEAN PioFisReceived;
+ BOOLEAN D2hFisReceived;
+
+ if (Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+
+ if (Read) {
+ Flag = EfiPciIoOperationBusMasterWrite;
+ } else {
+ Flag = EfiPciIoOperationBusMasterRead;
+ }
+
+ //
+ // construct command list and command table with pci bus address
+ //
+ MapLength = DataCount;
+ Status = PciIo->Map (
+ PciIo,
+ Flag,
+ MemoryAddr,
+ &MapLength,
+ &PhyAddr,
+ &Map
+ );
+
+ if (EFI_ERROR (Status) || (DataCount != MapLength)) {
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ //
+ // Package read needed
+ //
+ AhciBuildCommandFis (&CFis, AtaCommandBlock);
+
+ ZeroMem (&CmdList, sizeof (EFI_AHCI_COMMAND_LIST));
+
+ CmdList.AhciCmdCfl = EFI_AHCI_FIS_REGISTER_H2D_LENGTH / 4;
+ CmdList.AhciCmdW = Read ? 0 : 1;
+
+ AhciBuildCommand (
+ PciIo,
+ AhciRegisters,
+ Port,
+ PortMultiplier,
+ &CFis,
+ &CmdList,
+ AtapiCommand,
+ AtapiCommandLength,
+ 0,
+ (VOID *)(UINTN)PhyAddr,
+ DataCount
+ );
+
+ Status = AhciStartCommand (
+ PciIo,
+ Port,
+ 0,
+ Timeout
+ );
+ if (EFI_ERROR (Status)) {
+ goto Exit;
+ }
+
+ //
+ // Check the status and wait the driver sending data
+ //
+ FisBaseAddr = (UINTN)AhciRegisters->AhciRFis + Port * sizeof (EFI_AHCI_RECEIVED_FIS);
+
+ if (Read && (AtapiCommand == 0)) {
+ //
+ // Wait device sends the PIO setup fis before data transfer
+ //
+ Status = EFI_TIMEOUT;
+ Delay = DivU64x32 (Timeout, 1000) + 1;
+ do {
+ PioFisReceived = FALSE;
+ D2hFisReceived = FALSE;
+ Offset = FisBaseAddr + EFI_AHCI_PIO_FIS_OFFSET;
+ Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK, EFI_AHCI_FIS_PIO_SETUP, NULL);
+ if (!EFI_ERROR (Status)) {
+ PioFisReceived = TRUE;
+ }
+ //
+ // According to SATA 2.6 spec section 11.7, D2h FIS means an error encountered.
+ // But Qemu and Marvel 9230 sata controller may just receive a D2h FIS from device
+ // after the transaction is finished successfully.
+ // To get better device compatibilities, we further check if the PxTFD's ERR bit is set.
+ // By this way, we can know if there is a real error happened.
+ //
+ Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
+ Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK, EFI_AHCI_FIS_REGISTER_D2H, NULL);
+ if (!EFI_ERROR (Status)) {
+ D2hFisReceived = TRUE;
+ }
+
+ if (PioFisReceived || D2hFisReceived) {
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
+ PortTfd = AhciReadReg (PciIo, (UINT32) Offset);
+ //
+ // PxTFD will be updated if there is a D2H or SetupFIS received.
+ //
+ if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
+ Status = EFI_DEVICE_ERROR;
+ break;
+ }
+
+ PrdCount = *(volatile UINT32 *) (&(AhciRegisters->AhciCmdList[0].AhciCmdPrdbc));
+ if (PrdCount == DataCount) {
+ Status = EFI_SUCCESS;
+ break;
+ }
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay(100);
+
+ Delay--;
+ if (Delay == 0) {
+ Status = EFI_TIMEOUT;
+ }
+ } while (InfiniteWait || (Delay > 0));
+ } else {
+ //
+ // Wait for D2H Fis is received
+ //
+ Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
+ Status = AhciWaitMemSet (
+ Offset,
+ EFI_AHCI_FIS_TYPE_MASK,
+ EFI_AHCI_FIS_REGISTER_D2H,
+ Timeout
+ );
+
+ if (EFI_ERROR (Status)) {
+ goto Exit;
+ }
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
+ PortTfd = AhciReadReg (PciIo, (UINT32) Offset);
+ if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
+ Status = EFI_DEVICE_ERROR;
+ }
+ }
+
+Exit:
+ AhciStopCommand (
+ PciIo,
+ Port,
+ Timeout
+ );
+
+ AhciDisableFisReceive (
+ PciIo,
+ Port,
+ Timeout
+ );
+
+ PciIo->Unmap (
+ PciIo,
+ Map
+ );
+
+ AhciDumpPortStatus (PciIo, Port, AtaStatusBlock);
+
+ return Status;
+}
+
+/**
+ Start a DMA data transfer on specific port
+
+ @param[in] Instance The ATA_ATAPI_PASS_THRU_INSTANCE protocol instance.
+ @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param[in] Port The number of port.
+ @param[in] PortMultiplier The timeout value of stop.
+ @param[in] AtapiCommand The atapi command will be used for the
+ transfer.
+ @param[in] AtapiCommandLength The length of the atapi command.
+ @param[in] Read The transfer direction.
+ @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data.
+ @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data.
+ @param[in, out] MemoryAddr The pointer to the data buffer.
+ @param[in] DataCount The data count to be transferred.
+ @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_DEVICE_ERROR The DMA data transfer abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for transfer.
+ @retval EFI_SUCCESS The DMA data transfer executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciDmaTransfer (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
+ IN UINT8 AtapiCommandLength,
+ IN BOOLEAN Read,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN OUT VOID *MemoryAddr,
+ IN UINT32 DataCount,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ )
+{
+ EFI_STATUS Status;
+ UINTN Offset;
+ EFI_PHYSICAL_ADDRESS PhyAddr;
+ VOID *Map;
+ UINTN MapLength;
+ EFI_PCI_IO_PROTOCOL_OPERATION Flag;
+ EFI_AHCI_COMMAND_FIS CFis;
+ EFI_AHCI_COMMAND_LIST CmdList;
+ UINTN FisBaseAddr;
+ UINT32 PortTfd;
+
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ EFI_TPL OldTpl;
+
+ Map = NULL;
+ PciIo = Instance->PciIo;
+
+ if (PciIo == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Before starting the Blocking BlockIO operation, push to finish all non-blocking
+ // BlockIO tasks.
+ // Delay 100us to simulate the blocking time out checking.
+ //
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+ while ((Task == NULL) && (!IsListEmpty (&Instance->NonBlockingTaskList))) {
+ AsyncNonBlockingTransferRoutine (NULL, Instance);
+ //
+ // Stall for 100us.
+ //
+ MicroSecondDelay (100);
+ }
+ gBS->RestoreTPL (OldTpl);
+
+ if ((Task == NULL) || ((Task != NULL) && (!Task->IsStart))) {
+ //
+ // Mark the Task to indicate that it has been started.
+ //
+ if (Task != NULL) {
+ Task->IsStart = TRUE;
+ }
+ if (Read) {
+ Flag = EfiPciIoOperationBusMasterWrite;
+ } else {
+ Flag = EfiPciIoOperationBusMasterRead;
+ }
+
+ //
+ // Construct command list and command table with pci bus address.
+ //
+ MapLength = DataCount;
+ Status = PciIo->Map (
+ PciIo,
+ Flag,
+ MemoryAddr,
+ &MapLength,
+ &PhyAddr,
+ &Map
+ );
+
+ if (EFI_ERROR (Status) || (DataCount != MapLength)) {
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ if (Task != NULL) {
+ Task->Map = Map;
+ }
+ //
+ // Package read needed
+ //
+ AhciBuildCommandFis (&CFis, AtaCommandBlock);
+
+ ZeroMem (&CmdList, sizeof (EFI_AHCI_COMMAND_LIST));
+
+ CmdList.AhciCmdCfl = EFI_AHCI_FIS_REGISTER_H2D_LENGTH / 4;
+ CmdList.AhciCmdW = Read ? 0 : 1;
+
+ AhciBuildCommand (
+ PciIo,
+ AhciRegisters,
+ Port,
+ PortMultiplier,
+ &CFis,
+ &CmdList,
+ AtapiCommand,
+ AtapiCommandLength,
+ 0,
+ (VOID *)(UINTN)PhyAddr,
+ DataCount
+ );
+
+ Status = AhciStartCommand (
+ PciIo,
+ Port,
+ 0,
+ Timeout
+ );
+ if (EFI_ERROR (Status)) {
+ goto Exit;
+ }
+ }
+
+ //
+ // Wait for command compelte
+ //
+ FisBaseAddr = (UINTN)AhciRegisters->AhciRFis + Port * sizeof (EFI_AHCI_RECEIVED_FIS);
+ Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
+ if (Task != NULL) {
+ //
+ // For Non-blocking
+ //
+ Status = AhciCheckMemSet (
+ Offset,
+ EFI_AHCI_FIS_TYPE_MASK,
+ EFI_AHCI_FIS_REGISTER_D2H,
+ Task
+ );
+ } else {
+ Status = AhciWaitMemSet (
+ Offset,
+ EFI_AHCI_FIS_TYPE_MASK,
+ EFI_AHCI_FIS_REGISTER_D2H,
+ Timeout
+ );
+ }
+
+ if (EFI_ERROR (Status)) {
+ goto Exit;
+ }
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
+ PortTfd = AhciReadReg (PciIo, (UINT32) Offset);
+ if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
+ Status = EFI_DEVICE_ERROR;
+ }
+
+Exit:
+ //
+ // For Blocking mode, the command should be stopped, the Fis should be disabled
+ // and the PciIo should be unmapped.
+ // For non-blocking mode, only when a error is happened (if the return status is
+ // EFI_NOT_READY that means the command doesn't finished, try again.), first do the
+ // context cleanup, then set the packet's Asb status.
+ //
+ if (Task == NULL ||
+ ((Task != NULL) && (Status != EFI_NOT_READY))
+ ) {
+ AhciStopCommand (
+ PciIo,
+ Port,
+ Timeout
+ );
+
+ AhciDisableFisReceive (
+ PciIo,
+ Port,
+ Timeout
+ );
+
+ PciIo->Unmap (
+ PciIo,
+ (Task != NULL) ? Task->Map : Map
+ );
+
+ if (Task != NULL) {
+ Task->Packet->Asb->AtaStatus = 0x01;
+ }
+ }
+
+ AhciDumpPortStatus (PciIo, Port, AtaStatusBlock);
+ return Status;
+}
+
+/**
+ Start a non data transfer on specific port.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param[in] Port The number of port.
+ @param[in] PortMultiplier The timeout value of stop.
+ @param[in] AtapiCommand The atapi command will be used for the
+ transfer.
+ @param[in] AtapiCommandLength The length of the atapi command.
+ @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data.
+ @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data.
+ @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_DEVICE_ERROR The non data transfer abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for transfer.
+ @retval EFI_SUCCESS The non data transfer executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciNonDataTransfer (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
+ IN UINT8 AtapiCommandLength,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ )
+{
+ EFI_STATUS Status;
+ UINTN FisBaseAddr;
+ UINTN Offset;
+ UINT32 PortTfd;
+ EFI_AHCI_COMMAND_FIS CFis;
+ EFI_AHCI_COMMAND_LIST CmdList;
+
+ //
+ // Package read needed
+ //
+ AhciBuildCommandFis (&CFis, AtaCommandBlock);
+
+ ZeroMem (&CmdList, sizeof (EFI_AHCI_COMMAND_LIST));
+
+ CmdList.AhciCmdCfl = EFI_AHCI_FIS_REGISTER_H2D_LENGTH / 4;
+
+ AhciBuildCommand (
+ PciIo,
+ AhciRegisters,
+ Port,
+ PortMultiplier,
+ &CFis,
+ &CmdList,
+ AtapiCommand,
+ AtapiCommandLength,
+ 0,
+ NULL,
+ 0
+ );
+
+ Status = AhciStartCommand (
+ PciIo,
+ Port,
+ 0,
+ Timeout
+ );
+ if (EFI_ERROR (Status)) {
+ goto Exit;
+ }
+
+ //
+ // Wait device sends the Response Fis
+ //
+ FisBaseAddr = (UINTN)AhciRegisters->AhciRFis + Port * sizeof (EFI_AHCI_RECEIVED_FIS);
+ Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
+ Status = AhciWaitMemSet (
+ Offset,
+ EFI_AHCI_FIS_TYPE_MASK,
+ EFI_AHCI_FIS_REGISTER_D2H,
+ Timeout
+ );
+
+ if (EFI_ERROR (Status)) {
+ goto Exit;
+ }
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
+ PortTfd = AhciReadReg (PciIo, (UINT32) Offset);
+ if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
+ Status = EFI_DEVICE_ERROR;
+ }
+
+Exit:
+ AhciStopCommand (
+ PciIo,
+ Port,
+ Timeout
+ );
+
+ AhciDisableFisReceive (
+ PciIo,
+ Port,
+ Timeout
+ );
+
+ AhciDumpPortStatus (PciIo, Port, AtaStatusBlock);
+
+ return Status;
+}
+
+/**
+ Stop command running for giving port
+
+ @param PciIo The PCI IO protocol instance.
+ @param Port The number of port.
+ @param Timeout The timeout value of stop, uses 100ns as a unit.
+
+ @retval EFI_DEVICE_ERROR The command stop unsuccessfully.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_SUCCESS The command stop successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciStopCommand (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Port,
+ IN UINT64 Timeout
+ )
+{
+ UINT32 Offset;
+ UINT32 Data;
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ Data = AhciReadReg (PciIo, Offset);
+
+ if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) == 0) {
+ return EFI_SUCCESS;
+ }
+
+ if ((Data & EFI_AHCI_PORT_CMD_ST) != 0) {
+ AhciAndReg (PciIo, Offset, (UINT32)~(EFI_AHCI_PORT_CMD_ST));
+ }
+
+ return AhciWaitMmioSet (
+ PciIo,
+ Offset,
+ EFI_AHCI_PORT_CMD_CR,
+ 0,
+ Timeout
+ );
+}
+
+/**
+ Start command for give slot on specific port.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Port The number of port.
+ @param CommandSlot The number of Command Slot.
+ @param Timeout The timeout value of start, uses 100ns as a unit.
+
+ @retval EFI_DEVICE_ERROR The command start unsuccessfully.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_SUCCESS The command start successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciStartCommand (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Port,
+ IN UINT8 CommandSlot,
+ IN UINT64 Timeout
+ )
+{
+ UINT32 CmdSlotBit;
+ EFI_STATUS Status;
+ UINT32 PortStatus;
+ UINT32 StartCmd;
+ UINT32 PortTfd;
+ UINT32 Offset;
+ UINT32 Capability;
+
+ //
+ // Collect AHCI controller information
+ //
+ Capability = AhciReadReg(PciIo, EFI_AHCI_CAPABILITY_OFFSET);
+
+ CmdSlotBit = (UINT32) (1 << CommandSlot);
+
+ AhciClearPortStatus (
+ PciIo,
+ Port
+ );
+
+ Status = AhciEnableFisReceive (
+ PciIo,
+ Port,
+ Timeout
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ PortStatus = AhciReadReg (PciIo, Offset);
+
+ StartCmd = 0;
+ if ((PortStatus & EFI_AHCI_PORT_CMD_ALPE) != 0) {
+ StartCmd = AhciReadReg (PciIo, Offset);
+ StartCmd &= ~EFI_AHCI_PORT_CMD_ICC_MASK;
+ StartCmd |= EFI_AHCI_PORT_CMD_ACTIVE;
+ }
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
+ PortTfd = AhciReadReg (PciIo, Offset);
+
+ if ((PortTfd & (EFI_AHCI_PORT_TFD_BSY | EFI_AHCI_PORT_TFD_DRQ)) != 0) {
+ if ((Capability & BIT24) != 0) {
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_CLO);
+
+ AhciWaitMmioSet (
+ PciIo,
+ Offset,
+ EFI_AHCI_PORT_CMD_CLO,
+ 0,
+ Timeout
+ );
+ }
+ }
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_ST | StartCmd);
+
+ //
+ // Setting the command
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CI;
+ AhciAndReg (PciIo, Offset, 0);
+ AhciOrReg (PciIo, Offset, CmdSlotBit);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Do AHCI port reset.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Port The number of port.
+ @param Timeout The timeout value of reset, uses 100ns as a unit.
+
+ @retval EFI_DEVICE_ERROR The port reset unsuccessfully
+ @retval EFI_TIMEOUT The reset operation is time out.
+ @retval EFI_SUCCESS The port reset successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciPortReset (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Port,
+ IN UINT64 Timeout
+ )
+{
+ EFI_STATUS Status;
+ UINT32 Offset;
+
+ AhciClearPortStatus (PciIo, Port);
+
+ AhciStopCommand (PciIo, Port, Timeout);
+
+ AhciDisableFisReceive (PciIo, Port, Timeout);
+
+ AhciEnableFisReceive (PciIo, Port, Timeout);
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SCTL;
+
+ AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_SCTL_DET_INIT);
+
+ //
+ // wait 5 millisecond before de-assert DET
+ //
+ MicroSecondDelay (5000);
+
+ AhciAndReg (PciIo, Offset, (UINT32)EFI_AHCI_PORT_SCTL_MASK);
+
+ //
+ // wait 5 millisecond before de-assert DET
+ //
+ MicroSecondDelay (5000);
+
+ //
+ // Wait for communication to be re-established
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SSTS;
+ Status = AhciWaitMmioSet (
+ PciIo,
+ Offset,
+ EFI_AHCI_PORT_SSTS_DET_MASK,
+ EFI_AHCI_PORT_SSTS_DET_PCE,
+ Timeout
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR;
+ AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_ERR_CLEAR);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Do AHCI HBA reset.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Timeout The timeout value of reset, uses 100ns as a unit.
+
+ @retval EFI_DEVICE_ERROR AHCI controller is failed to complete hardware reset.
+ @retval EFI_TIMEOUT The reset operation is time out.
+ @retval EFI_SUCCESS AHCI controller is reset successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciReset (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT64 Timeout
+ )
+{
+ UINT64 Delay;
+ UINT32 Value;
+ UINT32 Capability;
+
+ //
+ // Collect AHCI controller information
+ //
+ Capability = AhciReadReg (PciIo, EFI_AHCI_CAPABILITY_OFFSET);
+
+ //
+ // Enable AE before accessing any AHCI registers if Supports AHCI Mode Only is not set
+ //
+ if ((Capability & EFI_AHCI_CAP_SAM) == 0) {
+ AhciOrReg (PciIo, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE);
+ }
+
+ AhciOrReg (PciIo, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_RESET);
+
+ Delay = DivU64x32(Timeout, 1000) + 1;
+
+ do {
+ Value = AhciReadReg(PciIo, EFI_AHCI_GHC_OFFSET);
+
+ if ((Value & EFI_AHCI_GHC_RESET) == 0) {
+ break;
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay(100);
+
+ Delay--;
+ } while (Delay > 0);
+
+ if (Delay == 0) {
+ return EFI_TIMEOUT;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Send SMART Return Status command to check if the execution of SMART cmd is successful or not.
+
+ @param PciIo The PCI IO protocol instance.
+ @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param Port The number of port.
+ @param PortMultiplier The timeout value of stop.
+ @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+
+ @retval EFI_SUCCESS Successfully get the return status of S.M.A.R.T command execution.
+ @retval Others Fail to get return status data.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciAtaSmartReturnStatusCheck (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
+ )
+{
+ EFI_STATUS Status;
+ EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
+ UINT8 LBAMid;
+ UINT8 LBAHigh;
+ UINTN FisBaseAddr;
+ UINT32 Value;
+
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+
+ AtaCommandBlock.AtaCommand = ATA_CMD_SMART;
+ AtaCommandBlock.AtaFeatures = ATA_SMART_RETURN_STATUS;
+ AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F;
+ AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2;
+
+ //
+ // Send S.M.A.R.T Read Return Status command to device
+ //
+ Status = AhciNonDataTransfer (
+ PciIo,
+ AhciRegisters,
+ (UINT8)Port,
+ (UINT8)PortMultiplier,
+ NULL,
+ 0,
+ &AtaCommandBlock,
+ AtaStatusBlock,
+ ATA_ATAPI_TIMEOUT,
+ NULL
+ );
+
+ if (EFI_ERROR (Status)) {
+ REPORT_STATUS_CODE (
+ EFI_ERROR_CODE | EFI_ERROR_MINOR,
+ (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLED)
+ );
+ return EFI_DEVICE_ERROR;
+ }
+
+ REPORT_STATUS_CODE (
+ EFI_PROGRESS_CODE,
+ (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_ENABLE)
+ );
+
+ FisBaseAddr = (UINTN)AhciRegisters->AhciRFis + Port * sizeof (EFI_AHCI_RECEIVED_FIS);
+
+ Value = *(UINT32 *) (FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET);
+
+ if ((Value & EFI_AHCI_FIS_TYPE_MASK) == EFI_AHCI_FIS_REGISTER_D2H) {
+ LBAMid = ((UINT8 *)(UINTN)(FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET))[5];
+ LBAHigh = ((UINT8 *)(UINTN)(FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET))[6];
+
+ if ((LBAMid == 0x4f) && (LBAHigh == 0xc2)) {
+ //
+ // The threshold exceeded condition is not detected by the device
+ //
+ DEBUG ((EFI_D_INFO, "The S.M.A.R.T threshold exceeded condition is not detected\n"));
+ REPORT_STATUS_CODE (
+ EFI_PROGRESS_CODE,
+ (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_UNDERTHRESHOLD)
+ );
+ } else if ((LBAMid == 0xf4) && (LBAHigh == 0x2c)) {
+ //
+ // The threshold exceeded condition is detected by the device
+ //
+ DEBUG ((EFI_D_INFO, "The S.M.A.R.T threshold exceeded condition is detected\n"));
+ REPORT_STATUS_CODE (
+ EFI_PROGRESS_CODE,
+ (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_OVERTHRESHOLD)
+ );
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Enable SMART command of the disk if supported.
+
+ @param PciIo The PCI IO protocol instance.
+ @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param Port The number of port.
+ @param PortMultiplier The timeout value of stop.
+ @param IdentifyData A pointer to data buffer which is used to contain IDENTIFY data.
+ @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+
+**/
+VOID
+EFIAPI
+AhciAtaSmartSupport (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_IDENTIFY_DATA *IdentifyData,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
+ )
+{
+ EFI_STATUS Status;
+ EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
+
+ //
+ // Detect if the device supports S.M.A.R.T.
+ //
+ if ((IdentifyData->AtaData.command_set_supported_82 & 0x0001) != 0x0001) {
+ //
+ // S.M.A.R.T is not supported by the device
+ //
+ DEBUG ((EFI_D_INFO, "S.M.A.R.T feature is not supported at port [%d] PortMultiplier [%d]!\n",
+ Port, PortMultiplier));
+ REPORT_STATUS_CODE (
+ EFI_ERROR_CODE | EFI_ERROR_MINOR,
+ (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_NOTSUPPORTED)
+ );
+ } else {
+ //
+ // Check if the feature is enabled. If not, then enable S.M.A.R.T.
+ //
+ if ((IdentifyData->AtaData.command_set_feature_enb_85 & 0x0001) != 0x0001) {
+
+ REPORT_STATUS_CODE (
+ EFI_PROGRESS_CODE,
+ (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLE)
+ );
+
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+
+ AtaCommandBlock.AtaCommand = ATA_CMD_SMART;
+ AtaCommandBlock.AtaFeatures = ATA_SMART_ENABLE_OPERATION;
+ AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F;
+ AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2;
+
+ //
+ // Send S.M.A.R.T Enable command to device
+ //
+ Status = AhciNonDataTransfer (
+ PciIo,
+ AhciRegisters,
+ (UINT8)Port,
+ (UINT8)PortMultiplier,
+ NULL,
+ 0,
+ &AtaCommandBlock,
+ AtaStatusBlock,
+ ATA_ATAPI_TIMEOUT,
+ NULL
+ );
+
+
+ if (!EFI_ERROR (Status)) {
+ //
+ // Send S.M.A.R.T AutoSave command to device
+ //
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+
+ AtaCommandBlock.AtaCommand = ATA_CMD_SMART;
+ AtaCommandBlock.AtaFeatures = 0xD2;
+ AtaCommandBlock.AtaSectorCount = 0xF1;
+ AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F;
+ AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2;
+
+ Status = AhciNonDataTransfer (
+ PciIo,
+ AhciRegisters,
+ (UINT8)Port,
+ (UINT8)PortMultiplier,
+ NULL,
+ 0,
+ &AtaCommandBlock,
+ AtaStatusBlock,
+ ATA_ATAPI_TIMEOUT,
+ NULL
+ );
+
+ if (!EFI_ERROR (Status)) {
+ Status = AhciAtaSmartReturnStatusCheck (
+ PciIo,
+ AhciRegisters,
+ (UINT8)Port,
+ (UINT8)PortMultiplier,
+ AtaStatusBlock
+ );
+ }
+ }
+ }
+ DEBUG ((EFI_D_INFO, "Enabled S.M.A.R.T feature at port [%d] PortMultiplier [%d]!\n",
+ Port, PortMultiplier));
+ }
+
+ return ;
+}
+
+/**
+ Send Buffer cmd to specific device.
+
+ @param PciIo The PCI IO protocol instance.
+ @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param Port The number of port.
+ @param PortMultiplier The timeout value of stop.
+ @param Buffer The data buffer to store IDENTIFY PACKET data.
+
+ @retval EFI_DEVICE_ERROR The cmd abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for executing.
+ @retval EFI_SUCCESS The cmd executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciIdentify (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN OUT EFI_IDENTIFY_DATA *Buffer
+ )
+{
+ EFI_STATUS Status;
+ EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
+ EFI_ATA_STATUS_BLOCK AtaStatusBlock;
+
+ if (PciIo == NULL || AhciRegisters == NULL || Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+ ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
+
+ AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DRIVE;
+ AtaCommandBlock.AtaSectorCount = 1;
+
+ Status = AhciPioTransfer (
+ PciIo,
+ AhciRegisters,
+ Port,
+ PortMultiplier,
+ NULL,
+ 0,
+ TRUE,
+ &AtaCommandBlock,
+ &AtaStatusBlock,
+ Buffer,
+ sizeof (EFI_IDENTIFY_DATA),
+ ATA_ATAPI_TIMEOUT,
+ NULL
+ );
+
+ return Status;
+}
+
+/**
+ Send Buffer cmd to specific device.
+
+ @param PciIo The PCI IO protocol instance.
+ @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param Port The number of port.
+ @param PortMultiplier The timeout value of stop.
+ @param Buffer The data buffer to store IDENTIFY PACKET data.
+
+ @retval EFI_DEVICE_ERROR The cmd abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for executing.
+ @retval EFI_SUCCESS The cmd executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciIdentifyPacket (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN OUT EFI_IDENTIFY_DATA *Buffer
+ )
+{
+ EFI_STATUS Status;
+ EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
+ EFI_ATA_STATUS_BLOCK AtaStatusBlock;
+
+ if (PciIo == NULL || AhciRegisters == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+ ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
+
+ AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DEVICE;
+ AtaCommandBlock.AtaSectorCount = 1;
+
+ Status = AhciPioTransfer (
+ PciIo,
+ AhciRegisters,
+ Port,
+ PortMultiplier,
+ NULL,
+ 0,
+ TRUE,
+ &AtaCommandBlock,
+ &AtaStatusBlock,
+ Buffer,
+ sizeof (EFI_IDENTIFY_DATA),
+ ATA_ATAPI_TIMEOUT,
+ NULL
+ );
+
+ return Status;
+}
+
+/**
+ Send SET FEATURE cmd on specific device.
+
+ @param PciIo The PCI IO protocol instance.
+ @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param Port The number of port.
+ @param PortMultiplier The timeout value of stop.
+ @param Feature The data to send Feature register.
+ @param FeatureSpecificData The specific data for SET FEATURE cmd.
+
+ @retval EFI_DEVICE_ERROR The cmd abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for executing.
+ @retval EFI_SUCCESS The cmd executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciDeviceSetFeature (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN UINT16 Feature,
+ IN UINT32 FeatureSpecificData
+ )
+{
+ EFI_STATUS Status;
+ EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
+ EFI_ATA_STATUS_BLOCK AtaStatusBlock;
+
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+ ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
+
+ AtaCommandBlock.AtaCommand = ATA_CMD_SET_FEATURES;
+ AtaCommandBlock.AtaFeatures = (UINT8) Feature;
+ AtaCommandBlock.AtaFeaturesExp = (UINT8) (Feature >> 8);
+ AtaCommandBlock.AtaSectorCount = (UINT8) FeatureSpecificData;
+ AtaCommandBlock.AtaSectorNumber = (UINT8) (FeatureSpecificData >> 8);
+ AtaCommandBlock.AtaCylinderLow = (UINT8) (FeatureSpecificData >> 16);
+ AtaCommandBlock.AtaCylinderHigh = (UINT8) (FeatureSpecificData >> 24);
+
+ Status = AhciNonDataTransfer (
+ PciIo,
+ AhciRegisters,
+ (UINT8)Port,
+ (UINT8)PortMultiplier,
+ NULL,
+ 0,
+ &AtaCommandBlock,
+ &AtaStatusBlock,
+ ATA_ATAPI_TIMEOUT,
+ NULL
+ );
+
+ return Status;
+}
+
+/**
+ This function is used to send out ATAPI commands conforms to the Packet Command
+ with PIO Protocol.
+
+ @param PciIo The PCI IO protocol instance.
+ @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param Port The number of port.
+ @param PortMultiplier The number of port multiplier.
+ @param Packet A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET structure.
+
+ @retval EFI_SUCCESS send out the ATAPI packet command successfully
+ and device sends data successfully.
+ @retval EFI_DEVICE_ERROR the device failed to send data.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciPacketCommandExecute (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet
+ )
+{
+ EFI_STATUS Status;
+ VOID *Buffer;
+ UINT32 Length;
+ EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
+ EFI_ATA_STATUS_BLOCK AtaStatusBlock;
+ BOOLEAN Read;
+
+ if (Packet == NULL || Packet->Cdb == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+ ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
+ AtaCommandBlock.AtaCommand = ATA_CMD_PACKET;
+ //
+ // No OVL; No DMA
+ //
+ AtaCommandBlock.AtaFeatures = 0x00;
+ //
+ // set the transfersize to ATAPI_MAX_BYTE_COUNT to let the device
+ // determine how many data should be transferred.
+ //
+ AtaCommandBlock.AtaCylinderLow = (UINT8) (ATAPI_MAX_BYTE_COUNT & 0x00ff);
+ AtaCommandBlock.AtaCylinderHigh = (UINT8) (ATAPI_MAX_BYTE_COUNT >> 8);
+
+ if (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ) {
+ Buffer = Packet->InDataBuffer;
+ Length = Packet->InTransferLength;
+ Read = TRUE;
+ } else {
+ Buffer = Packet->OutDataBuffer;
+ Length = Packet->OutTransferLength;
+ Read = FALSE;
+ }
+
+ if (Length == 0) {
+ Status = AhciNonDataTransfer (
+ PciIo,
+ AhciRegisters,
+ Port,
+ PortMultiplier,
+ Packet->Cdb,
+ Packet->CdbLength,
+ &AtaCommandBlock,
+ &AtaStatusBlock,
+ Packet->Timeout,
+ NULL
+ );
+ } else {
+ Status = AhciPioTransfer (
+ PciIo,
+ AhciRegisters,
+ Port,
+ PortMultiplier,
+ Packet->Cdb,
+ Packet->CdbLength,
+ Read,
+ &AtaCommandBlock,
+ &AtaStatusBlock,
+ Buffer,
+ Length,
+ Packet->Timeout,
+ NULL
+ );
+ }
+ return Status;
+}
+
+/**
+ Allocate transfer-related data struct which is used at AHCI mode.
+
+ @param PciIo The PCI IO protocol instance.
+ @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciCreateTransferDescriptor (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN OUT EFI_AHCI_REGISTERS *AhciRegisters
+ )
+{
+ EFI_STATUS Status;
+ UINTN Bytes;
+ VOID *Buffer;
+
+ UINT32 Capability;
+ UINT32 PortImplementBitMap;
+ UINT8 MaxPortNumber;
+ UINT8 MaxCommandSlotNumber;
+ BOOLEAN Support64Bit;
+ UINT64 MaxReceiveFisSize;
+ UINT64 MaxCommandListSize;
+ UINT64 MaxCommandTableSize;
+ EFI_PHYSICAL_ADDRESS AhciRFisPciAddr;
+ EFI_PHYSICAL_ADDRESS AhciCmdListPciAddr;
+ EFI_PHYSICAL_ADDRESS AhciCommandTablePciAddr;
+
+ Buffer = NULL;
+ //
+ // Collect AHCI controller information
+ //
+ Capability = AhciReadReg(PciIo, EFI_AHCI_CAPABILITY_OFFSET);
+ //
+ // Get the number of command slots per port supported by this HBA.
+ //
+ MaxCommandSlotNumber = (UINT8) (((Capability & 0x1F00) >> 8) + 1);
+ Support64Bit = (BOOLEAN) (((Capability & BIT31) != 0) ? TRUE : FALSE);
+
+ PortImplementBitMap = AhciReadReg(PciIo, EFI_AHCI_PI_OFFSET);
+ //
+ // Get the highest bit of implemented ports which decides how many bytes are allocated for recived FIS.
+ //
+ MaxPortNumber = (UINT8)(UINTN)(HighBitSet32(PortImplementBitMap) + 1);
+ if (MaxPortNumber == 0) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ MaxReceiveFisSize = MaxPortNumber * sizeof (EFI_AHCI_RECEIVED_FIS);
+ Status = PciIo->AllocateBuffer (
+ PciIo,
+ AllocateAnyPages,
+ EfiBootServicesData,
+ EFI_SIZE_TO_PAGES ((UINTN) MaxReceiveFisSize),
+ &Buffer,
+ 0
+ );
+
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ ZeroMem (Buffer, (UINTN)MaxReceiveFisSize);
+
+ AhciRegisters->AhciRFis = Buffer;
+ AhciRegisters->MaxReceiveFisSize = MaxReceiveFisSize;
+ Bytes = (UINTN)MaxReceiveFisSize;
+
+ Status = PciIo->Map (
+ PciIo,
+ EfiPciIoOperationBusMasterCommonBuffer,
+ Buffer,
+ &Bytes,
+ &AhciRFisPciAddr,
+ &AhciRegisters->MapRFis
+ );
+
+ if (EFI_ERROR (Status) || (Bytes != MaxReceiveFisSize)) {
+ //
+ // Map error or unable to map the whole RFis buffer into a contiguous region.
+ //
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Error6;
+ }
+
+ if ((!Support64Bit) && (AhciRFisPciAddr > 0x100000000ULL)) {
+ //
+ // The AHCI HBA doesn't support 64bit addressing, so should not get a >4G pci bus master address.
+ //
+ Status = EFI_DEVICE_ERROR;
+ goto Error5;
+ }
+ AhciRegisters->AhciRFisPciAddr = (EFI_AHCI_RECEIVED_FIS *)(UINTN)AhciRFisPciAddr;
+
+ //
+ // Allocate memory for command list
+ // Note that the implemenation is a single task model which only use a command list for all ports.
+ //
+ Buffer = NULL;
+ MaxCommandListSize = MaxCommandSlotNumber * sizeof (EFI_AHCI_COMMAND_LIST);
+ Status = PciIo->AllocateBuffer (
+ PciIo,
+ AllocateAnyPages,
+ EfiBootServicesData,
+ EFI_SIZE_TO_PAGES ((UINTN) MaxCommandListSize),
+ &Buffer,
+ 0
+ );
+
+ if (EFI_ERROR (Status)) {
+ //
+ // Free mapped resource.
+ //
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Error5;
+ }
+
+ ZeroMem (Buffer, (UINTN)MaxCommandListSize);
+
+ AhciRegisters->AhciCmdList = Buffer;
+ AhciRegisters->MaxCommandListSize = MaxCommandListSize;
+ Bytes = (UINTN)MaxCommandListSize;
+
+ Status = PciIo->Map (
+ PciIo,
+ EfiPciIoOperationBusMasterCommonBuffer,
+ Buffer,
+ &Bytes,
+ &AhciCmdListPciAddr,
+ &AhciRegisters->MapCmdList
+ );
+
+ if (EFI_ERROR (Status) || (Bytes != MaxCommandListSize)) {
+ //
+ // Map error or unable to map the whole cmd list buffer into a contiguous region.
+ //
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Error4;
+ }
+
+ if ((!Support64Bit) && (AhciCmdListPciAddr > 0x100000000ULL)) {
+ //
+ // The AHCI HBA doesn't support 64bit addressing, so should not get a >4G pci bus master address.
+ //
+ Status = EFI_DEVICE_ERROR;
+ goto Error3;
+ }
+ AhciRegisters->AhciCmdListPciAddr = (EFI_AHCI_COMMAND_LIST *)(UINTN)AhciCmdListPciAddr;
+
+ //
+ // Allocate memory for command table
+ // According to AHCI 1.3 spec, a PRD table can contain maximum 65535 entries.
+ //
+ Buffer = NULL;
+ MaxCommandTableSize = sizeof (EFI_AHCI_COMMAND_TABLE);
+
+ Status = PciIo->AllocateBuffer (
+ PciIo,
+ AllocateAnyPages,
+ EfiBootServicesData,
+ EFI_SIZE_TO_PAGES ((UINTN) MaxCommandTableSize),
+ &Buffer,
+ 0
+ );
+
+ if (EFI_ERROR (Status)) {
+ //
+ // Free mapped resource.
+ //
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Error3;
+ }
+
+ ZeroMem (Buffer, (UINTN)MaxCommandTableSize);
+
+ AhciRegisters->AhciCommandTable = Buffer;
+ AhciRegisters->MaxCommandTableSize = MaxCommandTableSize;
+ Bytes = (UINTN)MaxCommandTableSize;
+
+ Status = PciIo->Map (
+ PciIo,
+ EfiPciIoOperationBusMasterCommonBuffer,
+ Buffer,
+ &Bytes,
+ &AhciCommandTablePciAddr,
+ &AhciRegisters->MapCommandTable
+ );
+
+ if (EFI_ERROR (Status) || (Bytes != MaxCommandTableSize)) {
+ //
+ // Map error or unable to map the whole cmd list buffer into a contiguous region.
+ //
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Error2;
+ }
+
+ if ((!Support64Bit) && (AhciCommandTablePciAddr > 0x100000000ULL)) {
+ //
+ // The AHCI HBA doesn't support 64bit addressing, so should not get a >4G pci bus master address.
+ //
+ Status = EFI_DEVICE_ERROR;
+ goto Error1;
+ }
+ AhciRegisters->AhciCommandTablePciAddr = (EFI_AHCI_COMMAND_TABLE *)(UINTN)AhciCommandTablePciAddr;
+
+ return EFI_SUCCESS;
+ //
+ // Map error or unable to map the whole CmdList buffer into a contiguous region.
+ //
+Error1:
+ PciIo->Unmap (
+ PciIo,
+ AhciRegisters->MapCommandTable
+ );
+Error2:
+ PciIo->FreeBuffer (
+ PciIo,
+ EFI_SIZE_TO_PAGES ((UINTN) MaxCommandTableSize),
+ AhciRegisters->AhciCommandTable
+ );
+Error3:
+ PciIo->Unmap (
+ PciIo,
+ AhciRegisters->MapCmdList
+ );
+Error4:
+ PciIo->FreeBuffer (
+ PciIo,
+ EFI_SIZE_TO_PAGES ((UINTN) MaxCommandListSize),
+ AhciRegisters->AhciCmdList
+ );
+Error5:
+ PciIo->Unmap (
+ PciIo,
+ AhciRegisters->MapRFis
+ );
+Error6:
+ PciIo->FreeBuffer (
+ PciIo,
+ EFI_SIZE_TO_PAGES ((UINTN) MaxReceiveFisSize),
+ AhciRegisters->AhciRFis
+ );
+
+ return Status;
+}
+
+/**
+ Initialize ATA host controller at AHCI mode.
+
+ The function is designed to initialize ATA host controller.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciModeInitialization (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
+ )
+{
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit;
+ UINT32 Capability;
+ UINT8 MaxPortNumber;
+ UINT32 PortImplementBitMap;
+
+ EFI_AHCI_REGISTERS *AhciRegisters;
+
+ UINT8 Port;
+ DATA_64 Data64;
+ UINT32 Offset;
+ UINT32 Data;
+ EFI_IDENTIFY_DATA Buffer;
+ EFI_ATA_DEVICE_TYPE DeviceType;
+ EFI_ATA_COLLECTIVE_MODE *SupportedModes;
+ EFI_ATA_TRANSFER_MODE TransferMode;
+ UINT32 PhyDetectDelay;
+
+ if (Instance == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ PciIo = Instance->PciIo;
+ IdeInit = Instance->IdeControllerInit;
+
+ Status = AhciReset (PciIo, EFI_AHCI_BUS_RESET_TIMEOUT);
+
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Collect AHCI controller information
+ //
+ Capability = AhciReadReg (PciIo, EFI_AHCI_CAPABILITY_OFFSET);
+
+ //
+ // Enable AE before accessing any AHCI registers if Supports AHCI Mode Only is not set
+ //
+ if ((Capability & EFI_AHCI_CAP_SAM) == 0) {
+ AhciOrReg (PciIo, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE);
+ }
+
+ //
+ // Get the number of command slots per port supported by this HBA.
+ //
+ MaxPortNumber = (UINT8) ((Capability & 0x1F) + 1);
+
+ //
+ // Get the bit map of those ports exposed by this HBA.
+ // It indicates which ports that the HBA supports are available for software to use.
+ //
+ PortImplementBitMap = AhciReadReg(PciIo, EFI_AHCI_PI_OFFSET);
+
+ AhciRegisters = &Instance->AhciRegisters;
+ Status = AhciCreateTransferDescriptor (PciIo, AhciRegisters);
+
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ for (Port = 0; Port < EFI_AHCI_MAX_PORTS; Port ++) {
+ if ((PortImplementBitMap & (BIT0 << Port)) != 0) {
+ //
+ // According to AHCI spec, MaxPortNumber should be equal or greater than the number of implemented ports.
+ //
+ if ((MaxPortNumber--) == 0) {
+ //
+ // Should never be here.
+ //
+ ASSERT (FALSE);
+ return EFI_SUCCESS;
+ }
+
+ IdeInit->NotifyPhase (IdeInit, EfiIdeBeforeChannelEnumeration, Port);
+
+ //
+ // Initialize FIS Base Address Register and Command List Base Address Register for use.
+ //
+ Data64.Uint64 = (UINTN) (AhciRegisters->AhciRFisPciAddr) + sizeof (EFI_AHCI_RECEIVED_FIS) * Port;
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FB;
+ AhciWriteReg (PciIo, Offset, Data64.Uint32.Lower32);
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FBU;
+ AhciWriteReg (PciIo, Offset, Data64.Uint32.Upper32);
+
+ Data64.Uint64 = (UINTN) (AhciRegisters->AhciCmdListPciAddr);
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLB;
+ AhciWriteReg (PciIo, Offset, Data64.Uint32.Lower32);
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLBU;
+ AhciWriteReg (PciIo, Offset, Data64.Uint32.Upper32);
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ Data = AhciReadReg (PciIo, Offset);
+ if ((Data & EFI_AHCI_PORT_CMD_CPD) != 0) {
+ AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_POD);
+ }
+
+ if ((Capability & EFI_AHCI_CAP_SSS) != 0) {
+ AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_SUD);
+ }
+
+ //
+ // Disable aggressive power management.
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SCTL;
+ AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_SCTL_IPM_INIT);
+ //
+ // Disable the reporting of the corresponding interrupt to system software.
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IE;
+ AhciAndReg (PciIo, Offset, 0);
+
+ //
+ // Now inform the IDE Controller Init Module.
+ //
+ IdeInit->NotifyPhase (IdeInit, EfiIdeBusBeforeDevicePresenceDetection, Port);
+
+ //
+ // Enable FIS Receive DMA engine for the first D2H FIS.
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_FRE);
+ Status = AhciWaitMmioSet (
+ PciIo,
+ Offset,
+ EFI_AHCI_PORT_CMD_FR,
+ EFI_AHCI_PORT_CMD_FR,
+ EFI_AHCI_PORT_CMD_FR_CLEAR_TIMEOUT
+ );
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+
+ //
+ // Wait no longer than 10 ms to wait the Phy to detect the presence of a device.
+ // It's the requirment from SATA1.0a spec section 5.2.
+ //
+ PhyDetectDelay = EFI_AHCI_BUS_PHY_DETECT_TIMEOUT;
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SSTS;
+ do {
+ Data = AhciReadReg (PciIo, Offset) & EFI_AHCI_PORT_SSTS_DET_MASK;
+ if ((Data == EFI_AHCI_PORT_SSTS_DET_PCE) || (Data == EFI_AHCI_PORT_SSTS_DET)) {
+ break;
+ }
+
+ MicroSecondDelay (1000);
+ PhyDetectDelay--;
+ } while (PhyDetectDelay > 0);
+
+ if (PhyDetectDelay == 0) {
+ //
+ // No device detected at this port.
+ // Clear PxCMD.SUD for those ports at which there are no device present.
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ AhciAndReg (PciIo, Offset, (UINT32) ~(EFI_AHCI_PORT_CMD_SUD));
+ continue;
+ }
+
+ //
+ // According to SATA1.0a spec section 5.2, we need to wait for PxTFD.BSY and PxTFD.DRQ
+ // and PxTFD.ERR to be zero. The maximum wait time is 16s which is defined at ATA spec.
+ //
+ PhyDetectDelay = 16 * 1000;
+ do {
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR;
+ if (AhciReadReg(PciIo, Offset) != 0) {
+ AhciWriteReg (PciIo, Offset, AhciReadReg(PciIo, Offset));
+ }
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
+
+ Data = AhciReadReg (PciIo, Offset) & EFI_AHCI_PORT_TFD_MASK;
+ if (Data == 0) {
+ break;
+ }
+
+ MicroSecondDelay (1000);
+ PhyDetectDelay--;
+ } while (PhyDetectDelay > 0);
+
+ if (PhyDetectDelay == 0) {
+ continue;
+ }
+
+ //
+ // When the first D2H register FIS is received, the content of PxSIG register is updated.
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SIG;
+ Status = AhciWaitMmioSet (
+ PciIo,
+ Offset,
+ 0x0000FFFF,
+ 0x00000101,
+ EFI_TIMER_PERIOD_SECONDS(16)
+ );
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+
+ Data = AhciReadReg (PciIo, Offset);
+ if ((Data & EFI_AHCI_ATAPI_SIG_MASK) == EFI_AHCI_ATAPI_DEVICE_SIG) {
+ Status = AhciIdentifyPacket (PciIo, AhciRegisters, Port, 0, &Buffer);
+
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+
+ DeviceType = EfiIdeCdrom;
+ } else if ((Data & EFI_AHCI_ATAPI_SIG_MASK) == EFI_AHCI_ATA_DEVICE_SIG) {
+ Status = AhciIdentify (PciIo, AhciRegisters, Port, 0, &Buffer);
+
+ if (EFI_ERROR (Status)) {
+ REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_EC_NOT_DETECTED));
+ continue;
+ }
+
+ DeviceType = EfiIdeHarddisk;
+ } else {
+ continue;
+ }
+ DEBUG ((EFI_D_INFO, "port [%d] port mulitplier [%d] has a [%a]\n",
+ Port, 0, DeviceType == EfiIdeCdrom ? "cdrom" : "harddisk"));
+
+ //
+ // If the device is a hard disk, then try to enable S.M.A.R.T feature
+ //
+ if ((DeviceType == EfiIdeHarddisk) && PcdGetBool (PcdAtaSmartEnable)) {
+ AhciAtaSmartSupport (
+ PciIo,
+ AhciRegisters,
+ Port,
+ 0,
+ &Buffer,
+ NULL
+ );
+ }
+
+ //
+ // Submit identify data to IDE controller init driver
+ //
+ IdeInit->SubmitData (IdeInit, Port, 0, &Buffer);
+
+ //
+ // Now start to config ide device parameter and transfer mode.
+ //
+ Status = IdeInit->CalculateMode (
+ IdeInit,
+ Port,
+ 0,
+ &SupportedModes
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Calculate Mode Fail, Status = %r\n", Status));
+ continue;
+ }
+
+ //
+ // Set best supported PIO mode on this IDE device
+ //
+ if (SupportedModes->PioMode.Mode <= EfiAtaPioMode2) {
+ TransferMode.ModeCategory = EFI_ATA_MODE_DEFAULT_PIO;
+ } else {
+ TransferMode.ModeCategory = EFI_ATA_MODE_FLOW_PIO;
+ }
+
+ TransferMode.ModeNumber = (UINT8) (SupportedModes->PioMode.Mode);
+
+ //
+ // Set supported DMA mode on this IDE device. Note that UDMA & MDMA cann't
+ // be set together. Only one DMA mode can be set to a device. If setting
+ // DMA mode operation fails, we can continue moving on because we only use
+ // PIO mode at boot time. DMA modes are used by certain kind of OS booting
+ //
+ if (SupportedModes->UdmaMode.Valid) {
+ TransferMode.ModeCategory = EFI_ATA_MODE_UDMA;
+ TransferMode.ModeNumber = (UINT8) (SupportedModes->UdmaMode.Mode);
+ } else if (SupportedModes->MultiWordDmaMode.Valid) {
+ TransferMode.ModeCategory = EFI_ATA_MODE_MDMA;
+ TransferMode.ModeNumber = (UINT8) SupportedModes->MultiWordDmaMode.Mode;
+ }
+
+ Status = AhciDeviceSetFeature (PciIo, AhciRegisters, Port, 0, 0x03, (UINT32)(*(UINT8 *)&TransferMode));
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Set transfer Mode Fail, Status = %r\n", Status));
+ continue;
+ }
+
+ //
+ // Found a ATA or ATAPI device, add it into the device list.
+ //
+ CreateNewDeviceInfo (Instance, Port, 0, DeviceType, &Buffer);
+ if (DeviceType == EfiIdeHarddisk) {
+ REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_PC_ENABLE));
+ }
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
diff --git a/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.h b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.h new file mode 100644 index 0000000000..6401fb2e9f --- /dev/null +++ b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.h @@ -0,0 +1,370 @@ +/** @file
+ Header file for AHCI mode of ATA host controller.
+
+ Copyright (c) 2010 - 2014, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#ifndef __ATA_HC_AHCI_MODE_H__
+#define __ATA_HC_AHCI_MODE_H__
+
+#define EFI_AHCI_BAR_INDEX 0x05
+
+#define EFI_AHCI_CAPABILITY_OFFSET 0x0000
+#define EFI_AHCI_CAP_SAM BIT18
+#define EFI_AHCI_CAP_SSS BIT27
+#define EFI_AHCI_CAP_S64A BIT31
+#define EFI_AHCI_GHC_OFFSET 0x0004
+#define EFI_AHCI_GHC_RESET BIT0
+#define EFI_AHCI_GHC_IE BIT1
+#define EFI_AHCI_GHC_ENABLE BIT31
+#define EFI_AHCI_IS_OFFSET 0x0008
+#define EFI_AHCI_PI_OFFSET 0x000C
+
+#define EFI_AHCI_MAX_PORTS 32
+
+typedef struct {
+ UINT32 Lower32;
+ UINT32 Upper32;
+} DATA_32;
+
+typedef union {
+ DATA_32 Uint32;
+ UINT64 Uint64;
+} DATA_64;
+
+//
+// Refer SATA1.0a spec section 5.2, the Phy detection time should be less than 10ms.
+//
+#define EFI_AHCI_BUS_PHY_DETECT_TIMEOUT 10
+//
+// Refer SATA1.0a spec, the FIS enable time should be less than 500ms.
+//
+#define EFI_AHCI_PORT_CMD_FR_CLEAR_TIMEOUT EFI_TIMER_PERIOD_MILLISECONDS(500)
+//
+// Refer SATA1.0a spec, the bus reset time should be less than 1s.
+//
+#define EFI_AHCI_BUS_RESET_TIMEOUT EFI_TIMER_PERIOD_SECONDS(1)
+
+#define EFI_AHCI_ATAPI_DEVICE_SIG 0xEB140000
+#define EFI_AHCI_ATA_DEVICE_SIG 0x00000000
+#define EFI_AHCI_PORT_MULTIPLIER_SIG 0x96690000
+#define EFI_AHCI_ATAPI_SIG_MASK 0xFFFF0000
+
+//
+// Each PRDT entry can point to a memory block up to 4M byte
+//
+#define EFI_AHCI_MAX_DATA_PER_PRDT 0x400000
+
+#define EFI_AHCI_FIS_REGISTER_H2D 0x27 //Register FIS - Host to Device
+#define EFI_AHCI_FIS_REGISTER_H2D_LENGTH 20
+#define EFI_AHCI_FIS_REGISTER_D2H 0x34 //Register FIS - Device to Host
+#define EFI_AHCI_FIS_REGISTER_D2H_LENGTH 20
+#define EFI_AHCI_FIS_DMA_ACTIVATE 0x39 //DMA Activate FIS - Device to Host
+#define EFI_AHCI_FIS_DMA_ACTIVATE_LENGTH 4
+#define EFI_AHCI_FIS_DMA_SETUP 0x41 //DMA Setup FIS - Bi-directional
+#define EFI_AHCI_FIS_DMA_SETUP_LENGTH 28
+#define EFI_AHCI_FIS_DATA 0x46 //Data FIS - Bi-directional
+#define EFI_AHCI_FIS_BIST 0x58 //BIST Activate FIS - Bi-directional
+#define EFI_AHCI_FIS_BIST_LENGTH 12
+#define EFI_AHCI_FIS_PIO_SETUP 0x5F //PIO Setup FIS - Device to Host
+#define EFI_AHCI_FIS_PIO_SETUP_LENGTH 20
+#define EFI_AHCI_FIS_SET_DEVICE 0xA1 //Set Device Bits FIS - Device to Host
+#define EFI_AHCI_FIS_SET_DEVICE_LENGTH 8
+
+#define EFI_AHCI_D2H_FIS_OFFSET 0x40
+#define EFI_AHCI_DMA_FIS_OFFSET 0x00
+#define EFI_AHCI_PIO_FIS_OFFSET 0x20
+#define EFI_AHCI_SDB_FIS_OFFSET 0x58
+#define EFI_AHCI_FIS_TYPE_MASK 0xFF
+#define EFI_AHCI_U_FIS_OFFSET 0x60
+
+//
+// Port register
+//
+#define EFI_AHCI_PORT_START 0x0100
+#define EFI_AHCI_PORT_REG_WIDTH 0x0080
+#define EFI_AHCI_PORT_CLB 0x0000
+#define EFI_AHCI_PORT_CLBU 0x0004
+#define EFI_AHCI_PORT_FB 0x0008
+#define EFI_AHCI_PORT_FBU 0x000C
+#define EFI_AHCI_PORT_IS 0x0010
+#define EFI_AHCI_PORT_IS_DHRS BIT0
+#define EFI_AHCI_PORT_IS_PSS BIT1
+#define EFI_AHCI_PORT_IS_SSS BIT2
+#define EFI_AHCI_PORT_IS_SDBS BIT3
+#define EFI_AHCI_PORT_IS_UFS BIT4
+#define EFI_AHCI_PORT_IS_DPS BIT5
+#define EFI_AHCI_PORT_IS_PCS BIT6
+#define EFI_AHCI_PORT_IS_DIS BIT7
+#define EFI_AHCI_PORT_IS_PRCS BIT22
+#define EFI_AHCI_PORT_IS_IPMS BIT23
+#define EFI_AHCI_PORT_IS_OFS BIT24
+#define EFI_AHCI_PORT_IS_INFS BIT26
+#define EFI_AHCI_PORT_IS_IFS BIT27
+#define EFI_AHCI_PORT_IS_HBDS BIT28
+#define EFI_AHCI_PORT_IS_HBFS BIT29
+#define EFI_AHCI_PORT_IS_TFES BIT30
+#define EFI_AHCI_PORT_IS_CPDS BIT31
+#define EFI_AHCI_PORT_IS_CLEAR 0xFFFFFFFF
+#define EFI_AHCI_PORT_IS_FIS_CLEAR 0x0000000F
+
+#define EFI_AHCI_PORT_IE 0x0014
+#define EFI_AHCI_PORT_CMD 0x0018
+#define EFI_AHCI_PORT_CMD_ST_MASK 0xFFFFFFFE
+#define EFI_AHCI_PORT_CMD_ST BIT0
+#define EFI_AHCI_PORT_CMD_SUD BIT1
+#define EFI_AHCI_PORT_CMD_POD BIT2
+#define EFI_AHCI_PORT_CMD_CLO BIT3
+#define EFI_AHCI_PORT_CMD_CR BIT15
+#define EFI_AHCI_PORT_CMD_FRE BIT4
+#define EFI_AHCI_PORT_CMD_FR BIT14
+#define EFI_AHCI_PORT_CMD_MASK ~(EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_FRE | EFI_AHCI_PORT_CMD_COL)
+#define EFI_AHCI_PORT_CMD_PMA BIT17
+#define EFI_AHCI_PORT_CMD_HPCP BIT18
+#define EFI_AHCI_PORT_CMD_MPSP BIT19
+#define EFI_AHCI_PORT_CMD_CPD BIT20
+#define EFI_AHCI_PORT_CMD_ESP BIT21
+#define EFI_AHCI_PORT_CMD_ATAPI BIT24
+#define EFI_AHCI_PORT_CMD_DLAE BIT25
+#define EFI_AHCI_PORT_CMD_ALPE BIT26
+#define EFI_AHCI_PORT_CMD_ASP BIT27
+#define EFI_AHCI_PORT_CMD_ICC_MASK (BIT28 | BIT29 | BIT30 | BIT31)
+#define EFI_AHCI_PORT_CMD_ACTIVE (1 << 28 )
+#define EFI_AHCI_PORT_TFD 0x0020
+#define EFI_AHCI_PORT_TFD_MASK (BIT7 | BIT3 | BIT0)
+#define EFI_AHCI_PORT_TFD_BSY BIT7
+#define EFI_AHCI_PORT_TFD_DRQ BIT3
+#define EFI_AHCI_PORT_TFD_ERR BIT0
+#define EFI_AHCI_PORT_TFD_ERR_MASK 0x00FF00
+#define EFI_AHCI_PORT_SIG 0x0024
+#define EFI_AHCI_PORT_SSTS 0x0028
+#define EFI_AHCI_PORT_SSTS_DET_MASK 0x000F
+#define EFI_AHCI_PORT_SSTS_DET 0x0001
+#define EFI_AHCI_PORT_SSTS_DET_PCE 0x0003
+#define EFI_AHCI_PORT_SSTS_SPD_MASK 0x00F0
+#define EFI_AHCI_PORT_SCTL 0x002C
+#define EFI_AHCI_PORT_SCTL_DET_MASK 0x000F
+#define EFI_AHCI_PORT_SCTL_MASK (~EFI_AHCI_PORT_SCTL_DET_MASK)
+#define EFI_AHCI_PORT_SCTL_DET_INIT 0x0001
+#define EFI_AHCI_PORT_SCTL_DET_PHYCOMM 0x0003
+#define EFI_AHCI_PORT_SCTL_SPD_MASK 0x00F0
+#define EFI_AHCI_PORT_SCTL_IPM_MASK 0x0F00
+#define EFI_AHCI_PORT_SCTL_IPM_INIT 0x0300
+#define EFI_AHCI_PORT_SCTL_IPM_PSD 0x0100
+#define EFI_AHCI_PORT_SCTL_IPM_SSD 0x0200
+#define EFI_AHCI_PORT_SERR 0x0030
+#define EFI_AHCI_PORT_SERR_RDIE BIT0
+#define EFI_AHCI_PORT_SERR_RCE BIT1
+#define EFI_AHCI_PORT_SERR_TDIE BIT8
+#define EFI_AHCI_PORT_SERR_PCDIE BIT9
+#define EFI_AHCI_PORT_SERR_PE BIT10
+#define EFI_AHCI_PORT_SERR_IE BIT11
+#define EFI_AHCI_PORT_SERR_PRC BIT16
+#define EFI_AHCI_PORT_SERR_PIE BIT17
+#define EFI_AHCI_PORT_SERR_CW BIT18
+#define EFI_AHCI_PORT_SERR_BDE BIT19
+#define EFI_AHCI_PORT_SERR_DE BIT20
+#define EFI_AHCI_PORT_SERR_CRCE BIT21
+#define EFI_AHCI_PORT_SERR_HE BIT22
+#define EFI_AHCI_PORT_SERR_LSE BIT23
+#define EFI_AHCI_PORT_SERR_TSTE BIT24
+#define EFI_AHCI_PORT_SERR_UFT BIT25
+#define EFI_AHCI_PORT_SERR_EX BIT26
+#define EFI_AHCI_PORT_ERR_CLEAR 0xFFFFFFFF
+#define EFI_AHCI_PORT_SACT 0x0034
+#define EFI_AHCI_PORT_CI 0x0038
+#define EFI_AHCI_PORT_SNTF 0x003C
+
+
+#pragma pack(1)
+//
+// Command List structure includes total 32 entries.
+// The entry data structure is listed at the following.
+//
+typedef struct {
+ UINT32 AhciCmdCfl:5; //Command FIS Length
+ UINT32 AhciCmdA:1; //ATAPI
+ UINT32 AhciCmdW:1; //Write
+ UINT32 AhciCmdP:1; //Prefetchable
+ UINT32 AhciCmdR:1; //Reset
+ UINT32 AhciCmdB:1; //BIST
+ UINT32 AhciCmdC:1; //Clear Busy upon R_OK
+ UINT32 AhciCmdRsvd:1;
+ UINT32 AhciCmdPmp:4; //Port Multiplier Port
+ UINT32 AhciCmdPrdtl:16; //Physical Region Descriptor Table Length
+ UINT32 AhciCmdPrdbc; //Physical Region Descriptor Byte Count
+ UINT32 AhciCmdCtba; //Command Table Descriptor Base Address
+ UINT32 AhciCmdCtbau; //Command Table Descriptor Base Address Upper 32-BITs
+ UINT32 AhciCmdRsvd1[4];
+} EFI_AHCI_COMMAND_LIST;
+
+//
+// This is a software constructed FIS.
+// For data transfer operations, this is the H2D Register FIS format as
+// specified in the Serial ATA Revision 2.6 specification.
+//
+typedef struct {
+ UINT8 AhciCFisType;
+ UINT8 AhciCFisPmNum:4;
+ UINT8 AhciCFisRsvd:1;
+ UINT8 AhciCFisRsvd1:1;
+ UINT8 AhciCFisRsvd2:1;
+ UINT8 AhciCFisCmdInd:1;
+ UINT8 AhciCFisCmd;
+ UINT8 AhciCFisFeature;
+ UINT8 AhciCFisSecNum;
+ UINT8 AhciCFisClyLow;
+ UINT8 AhciCFisClyHigh;
+ UINT8 AhciCFisDevHead;
+ UINT8 AhciCFisSecNumExp;
+ UINT8 AhciCFisClyLowExp;
+ UINT8 AhciCFisClyHighExp;
+ UINT8 AhciCFisFeatureExp;
+ UINT8 AhciCFisSecCount;
+ UINT8 AhciCFisSecCountExp;
+ UINT8 AhciCFisRsvd3;
+ UINT8 AhciCFisControl;
+ UINT8 AhciCFisRsvd4[4];
+ UINT8 AhciCFisRsvd5[44];
+} EFI_AHCI_COMMAND_FIS;
+
+//
+// ACMD: ATAPI command (12 or 16 bytes)
+//
+typedef struct {
+ UINT8 AtapiCmd[0x10];
+} EFI_AHCI_ATAPI_COMMAND;
+
+//
+// Physical Region Descriptor Table includes up to 65535 entries
+// The entry data structure is listed at the following.
+// the actual entry number comes from the PRDTL field in the command
+// list entry for this command slot.
+//
+typedef struct {
+ UINT32 AhciPrdtDba; //Data Base Address
+ UINT32 AhciPrdtDbau; //Data Base Address Upper 32-BITs
+ UINT32 AhciPrdtRsvd;
+ UINT32 AhciPrdtDbc:22; //Data Byte Count
+ UINT32 AhciPrdtRsvd1:9;
+ UINT32 AhciPrdtIoc:1; //Interrupt on Completion
+} EFI_AHCI_COMMAND_PRDT;
+
+//
+// Command table data strucute which is pointed to by the entry in the command list
+//
+typedef struct {
+ EFI_AHCI_COMMAND_FIS CommandFis; // A software constructed FIS.
+ EFI_AHCI_ATAPI_COMMAND AtapiCmd; // 12 or 16 bytes ATAPI cmd.
+ UINT8 Reserved[0x30];
+ EFI_AHCI_COMMAND_PRDT PrdtTable[65535]; // The scatter/gather list for data transfer
+} EFI_AHCI_COMMAND_TABLE;
+
+//
+// Received FIS structure
+//
+typedef struct {
+ UINT8 AhciDmaSetupFis[0x1C]; // Dma Setup Fis: offset 0x00
+ UINT8 AhciDmaSetupFisRsvd[0x04];
+ UINT8 AhciPioSetupFis[0x14]; // Pio Setup Fis: offset 0x20
+ UINT8 AhciPioSetupFisRsvd[0x0C];
+ UINT8 AhciD2HRegisterFis[0x14]; // D2H Register Fis: offset 0x40
+ UINT8 AhciD2HRegisterFisRsvd[0x04];
+ UINT64 AhciSetDeviceBitsFis; // Set Device Bits Fix: offset 0x58
+ UINT8 AhciUnknownFis[0x40]; // Unkonwn Fis: offset 0x60
+ UINT8 AhciUnknownFisRsvd[0x60];
+} EFI_AHCI_RECEIVED_FIS;
+
+#pragma pack()
+
+typedef struct {
+ EFI_AHCI_RECEIVED_FIS *AhciRFis;
+ EFI_AHCI_COMMAND_LIST *AhciCmdList;
+ EFI_AHCI_COMMAND_TABLE *AhciCommandTable;
+ EFI_AHCI_RECEIVED_FIS *AhciRFisPciAddr;
+ EFI_AHCI_COMMAND_LIST *AhciCmdListPciAddr;
+ EFI_AHCI_COMMAND_TABLE *AhciCommandTablePciAddr;
+ UINT64 MaxCommandListSize;
+ UINT64 MaxCommandTableSize;
+ UINT64 MaxReceiveFisSize;
+ VOID *MapRFis;
+ VOID *MapCmdList;
+ VOID *MapCommandTable;
+} EFI_AHCI_REGISTERS;
+
+/**
+ This function is used to send out ATAPI commands conforms to the Packet Command
+ with PIO Protocol.
+
+ @param PciIo The PCI IO protocol instance.
+ @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param Port The number of port.
+ @param PortMultiplier The number of port multiplier.
+ @param Packet A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET structure.
+
+ @retval EFI_SUCCESS send out the ATAPI packet command successfully
+ and device sends data successfully.
+ @retval EFI_DEVICE_ERROR the device failed to send data.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciPacketCommandExecute (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet
+ );
+
+/**
+ Start command for give slot on specific port.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Port The number of port.
+ @param CommandSlot The number of CommandSlot.
+ @param Timeout The timeout value of start, uses 100ns as a unit.
+
+ @retval EFI_DEVICE_ERROR The command start unsuccessfully.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_SUCCESS The command start successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciStartCommand (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Port,
+ IN UINT8 CommandSlot,
+ IN UINT64 Timeout
+ );
+
+/**
+ Stop command running for giving port
+
+ @param PciIo The PCI IO protocol instance.
+ @param Port The number of port.
+ @param Timeout The timeout value of stop, uses 100ns as a unit.
+
+ @retval EFI_DEVICE_ERROR The command stop unsuccessfully.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_SUCCESS The command stop successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciStopCommand (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Port,
+ IN UINT64 Timeout
+ );
+
+#endif
+
diff --git a/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.c b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.c new file mode 100644 index 0000000000..870900f106 --- /dev/null +++ b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.c @@ -0,0 +1,2604 @@ +/** @file
+ This file implements ATA_PASSTHRU_PROCTOCOL and EXT_SCSI_PASSTHRU_PROTOCOL interfaces
+ for managed ATA controllers.
+
+ Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "AtaAtapiPassThru.h"
+
+//
+// EFI_DRIVER_BINDING_PROTOCOL instance
+//
+EFI_DRIVER_BINDING_PROTOCOL gAtaAtapiPassThruDriverBinding = {
+ AtaAtapiPassThruSupported,
+ AtaAtapiPassThruStart,
+ AtaAtapiPassThruStop,
+ 0x10,
+ NULL,
+ NULL
+};
+
+ATA_ATAPI_PASS_THRU_INSTANCE gAtaAtapiPassThruInstanceTemplate = {
+ ATA_ATAPI_PASS_THRU_SIGNATURE,
+ 0, // Controller Handle
+ NULL, // PciIo Protocol
+ NULL, // IdeControllerInit Protocol
+ { // AtaPassThruMode
+ //
+ // According to UEFI2.3 spec Section 12.10, Drivers for non-RAID ATA controllers should set
+ // both EFI_ATA_PASS_THRU_ATTRIBUTES_PHYSICAL and EFI_ATA_PASS_THRU_ATTRIBUTES_LOGICAL
+ // bits.
+ // Note that the driver doesn't support AtaPassThru non blocking I/O.
+ //
+ EFI_ATA_PASS_THRU_ATTRIBUTES_PHYSICAL | EFI_ATA_PASS_THRU_ATTRIBUTES_LOGICAL | EFI_ATA_PASS_THRU_ATTRIBUTES_NONBLOCKIO,
+ //
+ // IoAlign
+ //
+ sizeof (UINTN)
+ },
+ { // AtaPassThru
+ NULL,
+ AtaPassThruPassThru,
+ AtaPassThruGetNextPort,
+ AtaPassThruGetNextDevice,
+ AtaPassThruBuildDevicePath,
+ AtaPassThruGetDevice,
+ AtaPassThruResetPort,
+ AtaPassThruResetDevice
+ },
+ { // ExtScsiPassThruMode
+ //
+ // AdapterId
+ //
+ 0,
+ //
+ // According to UEFI2.3 spec Section 14.7, Drivers for non-RAID SCSI controllers should set
+ // both EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL and EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL
+ // bits.
+ // Note that the driver doesn't support ExtScsiPassThru non blocking I/O.
+ //
+ EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL | EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL,
+ //
+ // IoAlign
+ //
+ sizeof (UINTN)
+ },
+ { // ExtScsiPassThru
+ NULL,
+ ExtScsiPassThruPassThru,
+ ExtScsiPassThruGetNextTargetLun,
+ ExtScsiPassThruBuildDevicePath,
+ ExtScsiPassThruGetTargetLun,
+ ExtScsiPassThruResetChannel,
+ ExtScsiPassThruResetTargetLun,
+ ExtScsiPassThruGetNextTarget
+ },
+ EfiAtaUnknownMode, // Work Mode
+ { // IdeRegisters
+ {0},
+ {0}
+ },
+ { // AhciRegisters
+ 0
+ },
+ { // DeviceList
+ NULL,
+ NULL
+ },
+ 0, // OriginalAttributes
+ 0, // PreviousPort
+ 0, // PreviousPortMultiplier
+ 0, // PreviousTargetId
+ 0, // PreviousLun
+ NULL, // Timer event
+ { // NonBlocking TaskList
+ NULL,
+ NULL
+ }
+};
+
+ATAPI_DEVICE_PATH mAtapiDevicePathTemplate = {
+ {
+ MESSAGING_DEVICE_PATH,
+ MSG_ATAPI_DP,
+ {
+ (UINT8) (sizeof (ATAPI_DEVICE_PATH)),
+ (UINT8) ((sizeof (ATAPI_DEVICE_PATH)) >> 8)
+ }
+ },
+ 0,
+ 0,
+ 0
+};
+
+SATA_DEVICE_PATH mSataDevicePathTemplate = {
+ {
+ MESSAGING_DEVICE_PATH,
+ MSG_SATA_DP,
+ {
+ (UINT8) (sizeof (SATA_DEVICE_PATH)),
+ (UINT8) ((sizeof (SATA_DEVICE_PATH)) >> 8)
+ }
+ },
+ 0,
+ 0,
+ 0
+};
+
+UINT8 mScsiId[TARGET_MAX_BYTES] = {
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF
+};
+
+/**
+ Sends an ATA command to an ATA device that is attached to the ATA controller. This function
+ supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required,
+ and the non-blocking I/O functionality is optional.
+
+ @param[in] Port The port number of the ATA device to send the command.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
+ If there is no port multiplier, then specify 0.
+ @param[in, out] Packet A pointer to the ATA command to send to the ATA device specified by Port
+ and PortMultiplierPort.
+ @param[in] Instance Pointer to the ATA_ATAPI_PASS_THRU_INSTANCE.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_SUCCESS The ATA command was sent by the host. For
+ bi-directional commands, InTransferLength bytes
+ were transferred from InDataBuffer. For
+ write and bi-directional commands, OutTransferLength
+ bytes were transferred by OutDataBuffer.
+ @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number
+ of bytes that could be transferred is returned
+ in InTransferLength. For write and bi-directional
+ commands, OutTransferLength bytes were transferred
+ by OutDataBuffer.
+ @retval EFI_NOT_READY The ATA command could not be sent because
+ there are too many ATA commands already
+ queued. The caller may retry again later.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting
+ to send the ATA command.
+ @retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents
+ of Acb are invalid. The ATA command was
+ not sent, so no additional status information
+ is available.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruPassThruExecute (
+ IN UINT16 Port,
+ IN UINT16 PortMultiplierPort,
+ IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet,
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN ATA_NONBLOCK_TASK *Task OPTIONAL
+ )
+{
+ EFI_ATA_PASS_THRU_CMD_PROTOCOL Protocol;
+ EFI_ATA_HC_WORK_MODE Mode;
+ EFI_STATUS Status;
+
+ Protocol = Packet->Protocol;
+
+ Mode = Instance->Mode;
+ switch (Mode) {
+ case EfiAtaIdeMode:
+ //
+ // Reassign IDE mode io port registers' base addresses
+ //
+ Status = GetIdeRegisterIoAddr (Instance->PciIo, Instance->IdeRegisters);
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ switch (Protocol) {
+ case EFI_ATA_PASS_THRU_PROTOCOL_ATA_NON_DATA:
+ Status = AtaNonDataCommandIn (
+ Instance->PciIo,
+ &Instance->IdeRegisters[Port],
+ Packet->Acb,
+ Packet->Asb,
+ Packet->Timeout,
+ Task
+ );
+ break;
+ case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_IN:
+ Status = AtaPioDataInOut (
+ Instance->PciIo,
+ &Instance->IdeRegisters[Port],
+ Packet->InDataBuffer,
+ Packet->InTransferLength,
+ TRUE,
+ Packet->Acb,
+ Packet->Asb,
+ Packet->Timeout,
+ Task
+ );
+ break;
+ case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_OUT:
+ Status = AtaPioDataInOut (
+ Instance->PciIo,
+ &Instance->IdeRegisters[Port],
+ Packet->OutDataBuffer,
+ Packet->OutTransferLength,
+ FALSE,
+ Packet->Acb,
+ Packet->Asb,
+ Packet->Timeout,
+ Task
+ );
+ break;
+ case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_IN:
+ Status = AtaUdmaInOut (
+ Instance,
+ &Instance->IdeRegisters[Port],
+ TRUE,
+ Packet->InDataBuffer,
+ Packet->InTransferLength,
+ Packet->Acb,
+ Packet->Asb,
+ Packet->Timeout,
+ Task
+ );
+ break;
+ case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_OUT:
+ Status = AtaUdmaInOut (
+ Instance,
+ &Instance->IdeRegisters[Port],
+ FALSE,
+ Packet->OutDataBuffer,
+ Packet->OutTransferLength,
+ Packet->Acb,
+ Packet->Asb,
+ Packet->Timeout,
+ Task
+ );
+ break;
+ default :
+ return EFI_UNSUPPORTED;
+ }
+ break;
+ case EfiAtaAhciMode :
+ switch (Protocol) {
+ case EFI_ATA_PASS_THRU_PROTOCOL_ATA_NON_DATA:
+ Status = AhciNonDataTransfer (
+ Instance->PciIo,
+ &Instance->AhciRegisters,
+ (UINT8)Port,
+ (UINT8)PortMultiplierPort,
+ NULL,
+ 0,
+ Packet->Acb,
+ Packet->Asb,
+ Packet->Timeout,
+ Task
+ );
+ break;
+ case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_IN:
+ Status = AhciPioTransfer (
+ Instance->PciIo,
+ &Instance->AhciRegisters,
+ (UINT8)Port,
+ (UINT8)PortMultiplierPort,
+ NULL,
+ 0,
+ TRUE,
+ Packet->Acb,
+ Packet->Asb,
+ Packet->InDataBuffer,
+ Packet->InTransferLength,
+ Packet->Timeout,
+ Task
+ );
+ break;
+ case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_OUT:
+ Status = AhciPioTransfer (
+ Instance->PciIo,
+ &Instance->AhciRegisters,
+ (UINT8)Port,
+ (UINT8)PortMultiplierPort,
+ NULL,
+ 0,
+ FALSE,
+ Packet->Acb,
+ Packet->Asb,
+ Packet->OutDataBuffer,
+ Packet->OutTransferLength,
+ Packet->Timeout,
+ Task
+ );
+ break;
+ case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_IN:
+ Status = AhciDmaTransfer (
+ Instance,
+ &Instance->AhciRegisters,
+ (UINT8)Port,
+ (UINT8)PortMultiplierPort,
+ NULL,
+ 0,
+ TRUE,
+ Packet->Acb,
+ Packet->Asb,
+ Packet->InDataBuffer,
+ Packet->InTransferLength,
+ Packet->Timeout,
+ Task
+ );
+ break;
+ case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_OUT:
+ Status = AhciDmaTransfer (
+ Instance,
+ &Instance->AhciRegisters,
+ (UINT8)Port,
+ (UINT8)PortMultiplierPort,
+ NULL,
+ 0,
+ FALSE,
+ Packet->Acb,
+ Packet->Asb,
+ Packet->OutDataBuffer,
+ Packet->OutTransferLength,
+ Packet->Timeout,
+ Task
+ );
+ break;
+ default :
+ return EFI_UNSUPPORTED;
+ }
+ break;
+
+ default:
+ Status = EFI_DEVICE_ERROR;
+ break;
+ }
+
+ return Status;
+}
+
+/**
+ Call back function when the timer event is signaled.
+
+ @param[in] Event The Event this notify function registered to.
+ @param[in] Context Pointer to the context data registered to the
+ Event.
+
+**/
+VOID
+EFIAPI
+AsyncNonBlockingTransferRoutine (
+ EFI_EVENT Event,
+ VOID* Context
+ )
+{
+ LIST_ENTRY *Entry;
+ LIST_ENTRY *EntryHeader;
+ ATA_NONBLOCK_TASK *Task;
+ EFI_STATUS Status;
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+
+ Instance = (ATA_ATAPI_PASS_THRU_INSTANCE *) Context;
+ EntryHeader = &Instance->NonBlockingTaskList;
+ //
+ // Get the Taks from the Taks List and execute it, until there is
+ // no task in the list or the device is busy with task (EFI_NOT_READY).
+ //
+ while (TRUE) {
+ if (!IsListEmpty (EntryHeader)) {
+ Entry = GetFirstNode (EntryHeader);
+ Task = ATA_NON_BLOCK_TASK_FROM_ENTRY (Entry);
+ } else {
+ return;
+ }
+
+ Status = AtaPassThruPassThruExecute (
+ Task->Port,
+ Task->PortMultiplier,
+ Task->Packet,
+ Instance,
+ Task
+ );
+
+ //
+ // If the data transfer meet a error, remove all tasks in the list since these tasks are
+ // associated with one task from Ata Bus and signal the event with error status.
+ //
+ if ((Status != EFI_NOT_READY) && (Status != EFI_SUCCESS)) {
+ DestroyAsynTaskList (Instance, TRUE);
+ break;
+ }
+
+ //
+ // For Non blocking mode, the Status of EFI_NOT_READY means the operation
+ // is not finished yet. Otherwise the operation is successful.
+ //
+ if (Status == EFI_NOT_READY) {
+ break;
+ } else {
+ RemoveEntryList (&Task->Link);
+ gBS->SignalEvent (Task->Event);
+ FreePool (Task);
+ }
+ }
+}
+
+/**
+ The Entry Point of module.
+
+ @param[in] ImageHandle The firmware allocated handle for the EFI image.
+ @param[in] SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The entry point is executed successfully.
+ @retval other Some error occurs when executing this entry point.
+
+**/
+EFI_STATUS
+EFIAPI
+InitializeAtaAtapiPassThru (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Install driver model protocol(s).
+ //
+ Status = EfiLibInstallDriverBindingComponentName2 (
+ ImageHandle,
+ SystemTable,
+ &gAtaAtapiPassThruDriverBinding,
+ ImageHandle,
+ &gAtaAtapiPassThruComponentName,
+ &gAtaAtapiPassThruComponentName2
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
+
+/**
+ Tests to see if this driver supports a given controller. If a child device is provided,
+ it further tests to see if this driver supports creating a handle for the specified child device.
+
+ This function checks to see if the driver specified by This supports the device specified by
+ ControllerHandle. Drivers will typically use the device path attached to
+ ControllerHandle and/or the services from the bus I/O abstraction attached to
+ ControllerHandle to determine if the driver supports ControllerHandle. This function
+ may be called many times during platform initialization. In order to reduce boot times, the tests
+ performed by this function must be very small, and take as little time as possible to execute. This
+ function must not change the state of any hardware devices, and this function must be aware that the
+ device specified by ControllerHandle may already be managed by the same driver or a
+ different driver. This function must match its calls to AllocatePages() with FreePages(),
+ AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
+ Because ControllerHandle may have been previously started by the same driver, if a protocol is
+ already in the opened state, then it must not be closed with CloseProtocol(). This is required
+ to guarantee the state of ControllerHandle is not modified by this function.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to test. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For bus drivers, if this parameter is not NULL, then
+ the bus driver must determine if the bus controller specified
+ by ControllerHandle and the child controller specified
+ by RemainingDevicePath are both supported by this
+ bus driver.
+
+ @retval EFI_SUCCESS The device specified by ControllerHandle and
+ RemainingDevicePath is supported by the driver specified by This.
+ @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by the driver
+ specified by This.
+ @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by a different
+ driver or an application that requires exclusive access.
+ Currently not implemented.
+ @retval EFI_UNSUPPORTED The device specified by ControllerHandle and
+ RemainingDevicePath is not supported by the driver specified by This.
+**/
+EFI_STATUS
+EFIAPI
+AtaAtapiPassThruSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ PCI_TYPE00 PciData;
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeControllerInit;
+
+ //
+ // SATA Controller is a device driver, and should ingore the
+ // "RemainingDevicePath" according to UEFI spec
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiDevicePathProtocolGuid,
+ (VOID *) &ParentDevicePath,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status)) {
+ //
+ // EFI_ALREADY_STARTED is also an error
+ //
+ return Status;
+ }
+ //
+ // Close the protocol because we don't use it here
+ //
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiDevicePathProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiIdeControllerInitProtocolGuid,
+ (VOID **) &IdeControllerInit,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+
+ if (EFI_ERROR (Status)) {
+ //
+ // EFI_ALREADY_STARTED is also an error
+ //
+ return Status;
+ }
+
+ //
+ // Close the I/O Abstraction(s) used to perform the supported test
+ //
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiIdeControllerInitProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ //
+ // Now test the EfiPciIoProtocol
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ (VOID **) &PciIo,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ //
+ // Now further check the PCI header: Base class (offset 0x0B) and
+ // Sub Class (offset 0x0A). This controller should be an ATA controller
+ //
+ Status = PciIo->Pci.Read (
+ PciIo,
+ EfiPciIoWidthUint8,
+ PCI_CLASSCODE_OFFSET,
+ sizeof (PciData.Hdr.ClassCode),
+ PciData.Hdr.ClassCode
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_UNSUPPORTED;
+ }
+
+ if (IS_PCI_IDE (&PciData) || IS_PCI_SATADPA (&PciData)) {
+ return EFI_SUCCESS;
+ }
+
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Starts a device controller or a bus controller.
+
+ The Start() function is designed to be invoked from the EFI boot service ConnectController().
+ As a result, much of the error checking on the parameters to Start() has been moved into this
+ common boot service. It is legal to call Start() from other locations,
+ but the following calling restrictions must be followed, or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE.
+ 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
+ EFI_DEVICE_PATH_PROTOCOL.
+ 3. Prior to calling Start(), the Supported() function for the driver specified by This must
+ have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to start. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For a bus driver, if this parameter is NULL, then handles
+ for all the children of Controller are created by this driver.
+ If this parameter is not NULL and the first Device Path Node is
+ not the End of Device Path Node, then only the handle for the
+ child device specified by the first Device Path Node of
+ RemainingDevicePath is created by this driver.
+ If the first Device Path Node of RemainingDevicePath is
+ the End of Device Path Node, no child handle is created by this
+ driver.
+
+ @retval EFI_SUCCESS The device was started.
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval Others The driver failded to start the device.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAtapiPassThruStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeControllerInit;
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ UINT64 Supports;
+ UINT64 OriginalPciAttributes;
+
+ Status = EFI_SUCCESS;
+ IdeControllerInit = NULL;
+ Instance = NULL;
+ OriginalPciAttributes = 0;
+
+ DEBUG ((EFI_D_INFO, "==AtaAtapiPassThru Start== Controller = %x\n", Controller));
+
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiIdeControllerInitProtocolGuid,
+ (VOID **) &IdeControllerInit,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Open Ide_Controller_Init Error, Status=%r", Status));
+ goto ErrorExit;
+ }
+
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ (VOID **) &PciIo,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Get Pci_Io Protocol Error, Status=%r", Status));
+ goto ErrorExit;
+ }
+
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationGet,
+ 0,
+ &OriginalPciAttributes
+ );
+
+ if (EFI_ERROR (Status)) {
+ goto ErrorExit;
+ }
+
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationSupported,
+ 0,
+ &Supports
+ );
+ if (!EFI_ERROR (Status)) {
+ Supports &= (UINT64)EFI_PCI_DEVICE_ENABLE;
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationEnable,
+ Supports,
+ NULL
+ );
+ }
+
+ if (EFI_ERROR (Status)) {
+ goto ErrorExit;
+ }
+
+ //
+ // Allocate a buffer to store the ATA_ATAPI_PASS_THRU_INSTANCE data structure
+ //
+ Instance = AllocateCopyPool (sizeof (ATA_ATAPI_PASS_THRU_INSTANCE), &gAtaAtapiPassThruInstanceTemplate);
+ if (Instance == NULL) {
+ goto ErrorExit;
+ }
+
+ Instance->ControllerHandle = Controller;
+ Instance->IdeControllerInit = IdeControllerInit;
+ Instance->PciIo = PciIo;
+ Instance->OriginalPciAttributes = OriginalPciAttributes;
+ Instance->AtaPassThru.Mode = &Instance->AtaPassThruMode;
+ Instance->ExtScsiPassThru.Mode = &Instance->ExtScsiPassThruMode;
+ InitializeListHead(&Instance->DeviceList);
+ InitializeListHead(&Instance->NonBlockingTaskList);
+
+ Instance->TimerEvent = NULL;
+
+ Status = gBS->CreateEvent (
+ EVT_TIMER | EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ AsyncNonBlockingTransferRoutine,
+ Instance,
+ &Instance->TimerEvent
+ );
+ if (EFI_ERROR (Status)) {
+ goto ErrorExit;
+ }
+
+ //
+ // Set 1ms timer.
+ //
+ Status = gBS->SetTimer (Instance->TimerEvent, TimerPeriodic, 10000);
+ if (EFI_ERROR (Status)) {
+ goto ErrorExit;
+ }
+
+ //
+ // Enumerate all inserted ATA devices.
+ //
+ Status = EnumerateAttachedDevice (Instance);
+ if (EFI_ERROR (Status)) {
+ goto ErrorExit;
+ }
+
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Controller,
+ &gEfiAtaPassThruProtocolGuid, &(Instance->AtaPassThru),
+ &gEfiExtScsiPassThruProtocolGuid, &(Instance->ExtScsiPassThru),
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+
+ErrorExit:
+ if (IdeControllerInit != NULL) {
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiIdeControllerInitProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+ }
+
+ if ((Instance != NULL) && (Instance->TimerEvent != NULL)) {
+ gBS->CloseEvent (Instance->TimerEvent);
+ }
+
+ //
+ // Remove all inserted ATA devices.
+ //
+ DestroyDeviceInfoList(Instance);
+
+ if (Instance != NULL) {
+ FreePool (Instance);
+ }
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Stops a device controller or a bus controller.
+
+ The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
+ As a result, much of the error checking on the parameters to Stop() has been moved
+ into this common boot service. It is legal to call Stop() from other locations,
+ but the following calling restrictions must be followed, or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
+ same driver's Start() function.
+ 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
+ EFI_HANDLE. In addition, all of these handles must have been created in this driver's
+ Start() function, and the Start() function must have called OpenProtocol() on
+ ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle A handle to the device being stopped. The handle must
+ support a bus specific I/O protocol for the driver
+ to use to stop the device.
+ @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
+ if NumberOfChildren is 0.
+
+ @retval EFI_SUCCESS The device was stopped.
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAtapiPassThruStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ )
+{
+ EFI_STATUS Status;
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+ EFI_ATA_PASS_THRU_PROTOCOL *AtaPassThru;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ EFI_AHCI_REGISTERS *AhciRegisters;
+ UINT64 Supports;
+
+ DEBUG ((EFI_D_INFO, "==AtaAtapiPassThru Stop== Controller = %x\n", Controller));
+
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiAtaPassThruProtocolGuid,
+ (VOID **) &AtaPassThru,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (AtaPassThru);
+
+ Status = gBS->UninstallMultipleProtocolInterfaces (
+ Controller,
+ &gEfiAtaPassThruProtocolGuid, &(Instance->AtaPassThru),
+ &gEfiExtScsiPassThruProtocolGuid, &(Instance->ExtScsiPassThru),
+ NULL
+ );
+
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Close protocols opened by AtaAtapiPassThru controller driver
+ //
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiIdeControllerInitProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ //
+ // Close Non-Blocking timer and free Task list.
+ //
+ if (Instance->TimerEvent != NULL) {
+ gBS->CloseEvent (Instance->TimerEvent);
+ Instance->TimerEvent = NULL;
+ }
+ DestroyAsynTaskList (Instance, FALSE);
+ //
+ // Free allocated resource
+ //
+ DestroyDeviceInfoList (Instance);
+
+ //
+ // If the current working mode is AHCI mode, then pre-allocated resource
+ // for AHCI initialization should be released.
+ //
+ PciIo = Instance->PciIo;
+
+ if (Instance->Mode == EfiAtaAhciMode) {
+ AhciRegisters = &Instance->AhciRegisters;
+ PciIo->Unmap (
+ PciIo,
+ AhciRegisters->MapCommandTable
+ );
+ PciIo->FreeBuffer (
+ PciIo,
+ EFI_SIZE_TO_PAGES ((UINTN) AhciRegisters->MaxCommandTableSize),
+ AhciRegisters->AhciCommandTable
+ );
+ PciIo->Unmap (
+ PciIo,
+ AhciRegisters->MapCmdList
+ );
+ PciIo->FreeBuffer (
+ PciIo,
+ EFI_SIZE_TO_PAGES ((UINTN) AhciRegisters->MaxCommandListSize),
+ AhciRegisters->AhciCmdList
+ );
+ PciIo->Unmap (
+ PciIo,
+ AhciRegisters->MapRFis
+ );
+ PciIo->FreeBuffer (
+ PciIo,
+ EFI_SIZE_TO_PAGES ((UINTN) AhciRegisters->MaxReceiveFisSize),
+ AhciRegisters->AhciRFis
+ );
+ }
+
+ //
+ // Disable this ATA host controller.
+ //
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationSupported,
+ 0,
+ &Supports
+ );
+ if (!EFI_ERROR (Status)) {
+ Supports &= (UINT64)EFI_PCI_DEVICE_ENABLE;
+ PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationDisable,
+ Supports,
+ NULL
+ );
+ }
+
+ //
+ // Restore original PCI attributes
+ //
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationSet,
+ Instance->OriginalPciAttributes,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ FreePool (Instance);
+
+ return Status;
+}
+
+/**
+ Traverse the attached ATA devices list to find out the device to access.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+ @param[in] Port The port number of the ATA device to send the command.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
+ If there is no port multiplier, then specify 0.
+ @param[in] DeviceType The device type of the ATA device.
+
+ @retval The pointer to the data structure of the device info to access.
+
+**/
+LIST_ENTRY *
+EFIAPI
+SearchDeviceInfoList (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplier,
+ IN EFI_ATA_DEVICE_TYPE DeviceType
+ )
+{
+ EFI_ATA_DEVICE_INFO *DeviceInfo;
+ LIST_ENTRY *Node;
+
+ Node = GetFirstNode (&Instance->DeviceList);
+ while (!IsNull (&Instance->DeviceList, Node)) {
+ DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
+
+ if ((DeviceInfo->Type == DeviceType) &&
+ (Port == DeviceInfo->Port) &&
+ (PortMultiplier == DeviceInfo->PortMultiplier)) {
+ return Node;
+ }
+
+ Node = GetNextNode (&Instance->DeviceList, Node);
+ }
+
+ return NULL;
+}
+
+/**
+ Allocate device info data structure to contain device info.
+ And insert the data structure to the tail of device list for tracing.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+ @param[in] Port The port number of the ATA device to send the command.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
+ If there is no port multiplier, then specify 0.
+ @param[in] DeviceType The device type of the ATA device.
+ @param[in] IdentifyData The data buffer to store the output of the IDENTIFY cmd.
+
+ @retval EFI_SUCCESS Successfully insert the ata device to the tail of device list.
+ @retval EFI_OUT_OF_RESOURCES Can not allocate enough resource for use.
+
+**/
+EFI_STATUS
+EFIAPI
+CreateNewDeviceInfo (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplier,
+ IN EFI_ATA_DEVICE_TYPE DeviceType,
+ IN EFI_IDENTIFY_DATA *IdentifyData
+ )
+{
+ EFI_ATA_DEVICE_INFO *DeviceInfo;
+
+ DeviceInfo = AllocateZeroPool (sizeof (EFI_ATA_DEVICE_INFO));
+
+ if (DeviceInfo == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ DeviceInfo->Signature = ATA_ATAPI_DEVICE_SIGNATURE;
+ DeviceInfo->Port = Port;
+ DeviceInfo->PortMultiplier = PortMultiplier;
+ DeviceInfo->Type = DeviceType;
+
+ if (IdentifyData != NULL) {
+ DeviceInfo->IdentifyData = AllocateCopyPool (sizeof (EFI_IDENTIFY_DATA), IdentifyData);
+ if (DeviceInfo->IdentifyData == NULL) {
+ FreePool (DeviceInfo);
+ return EFI_OUT_OF_RESOURCES;
+ }
+ }
+
+ InsertTailList (&Instance->DeviceList, &DeviceInfo->Link);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Destroy all attached ATA devices info.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+
+**/
+VOID
+EFIAPI
+DestroyDeviceInfoList (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
+ )
+{
+ EFI_ATA_DEVICE_INFO *DeviceInfo;
+ LIST_ENTRY *Node;
+
+ Node = GetFirstNode (&Instance->DeviceList);
+ while (!IsNull (&Instance->DeviceList, Node)) {
+ DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
+
+ Node = GetNextNode (&Instance->DeviceList, Node);
+
+ RemoveEntryList (&DeviceInfo->Link);
+ if (DeviceInfo->IdentifyData != NULL) {
+ FreePool (DeviceInfo->IdentifyData);
+ }
+ FreePool (DeviceInfo);
+ }
+}
+
+/**
+ Destroy all pending non blocking tasks.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+ @param[in] IsSigEvent Indicate whether signal the task event when remove the
+ task.
+
+**/
+VOID
+EFIAPI
+DestroyAsynTaskList (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN BOOLEAN IsSigEvent
+ )
+{
+ LIST_ENTRY *Entry;
+ LIST_ENTRY *DelEntry;
+ ATA_NONBLOCK_TASK *Task;
+ EFI_TPL OldTpl;
+
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+ if (!IsListEmpty (&Instance->NonBlockingTaskList)) {
+ //
+ // Free the Subtask list.
+ //
+ for (Entry = (&Instance->NonBlockingTaskList)->ForwardLink;
+ Entry != (&Instance->NonBlockingTaskList);
+ ) {
+ DelEntry = Entry;
+ Entry = Entry->ForwardLink;
+ Task = ATA_NON_BLOCK_TASK_FROM_ENTRY (DelEntry);
+
+ RemoveEntryList (DelEntry);
+ if (IsSigEvent) {
+ Task->Packet->Asb->AtaStatus = 0x01;
+ gBS->SignalEvent (Task->Event);
+ }
+ FreePool (Task);
+ }
+ }
+ gBS->RestoreTPL (OldTpl);
+}
+
+/**
+ Enumerate all attached ATA devices at IDE mode or AHCI mode separately.
+
+ The function is designed to enumerate all attached ATA devices.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+
+ @retval EFI_SUCCESS Successfully enumerate attached ATA devices.
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+EnumerateAttachedDevice (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
+ )
+{
+ EFI_STATUS Status;
+ PCI_TYPE00 PciData;
+ UINT8 ClassCode;
+
+ Status = EFI_SUCCESS;
+
+ Status = Instance->PciIo->Pci.Read (
+ Instance->PciIo,
+ EfiPciIoWidthUint8,
+ PCI_CLASSCODE_OFFSET,
+ sizeof (PciData.Hdr.ClassCode),
+ PciData.Hdr.ClassCode
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ ClassCode = PciData.Hdr.ClassCode[1];
+
+ switch (ClassCode) {
+ case PCI_CLASS_MASS_STORAGE_IDE :
+ //
+ // The ATA controller is working at IDE mode
+ //
+ Instance->Mode = EfiAtaIdeMode;
+
+ Status = IdeModeInitialization (Instance);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+ break;
+ case PCI_CLASS_MASS_STORAGE_SATADPA :
+ //
+ // The ATA controller is working at AHCI mode
+ //
+ Instance->Mode = EfiAtaAhciMode;
+
+ Status = AhciModeInitialization (Instance);
+
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
+ break;
+ default :
+ Status = EFI_UNSUPPORTED;
+ }
+
+Done:
+ return Status;
+}
+
+/**
+ Sends an ATA command to an ATA device that is attached to the ATA controller. This function
+ supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required,
+ and the non-blocking I/O functionality is optional.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] Port The port number of the ATA device to send the command.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
+ If there is no port multiplier, then specify 0.
+ @param[in, out] Packet A pointer to the ATA command to send to the ATA device specified by Port
+ and PortMultiplierPort.
+ @param[in] Event If non-blocking I/O is not supported then Event is ignored, and blocking
+ I/O is performed. If Event is NULL, then blocking I/O is performed. If
+ Event is not NULL and non blocking I/O is supported, then non-blocking
+ I/O is performed, and Event will be signaled when the ATA command completes.
+
+ @retval EFI_SUCCESS The ATA command was sent by the host. For bi-directional commands,
+ InTransferLength bytes were transferred from InDataBuffer. For write and
+ bi-directional commands, OutTransferLength bytes were transferred by OutDataBuffer.
+ @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number of bytes that could be transferred
+ is returned in InTransferLength. For write and bi-directional commands,
+ OutTransferLength bytes were transferred by OutDataBuffer.
+ @retval EFI_NOT_READY The ATA command could not be sent because there are too many ATA commands
+ already queued. The caller may retry again later.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the ATA command.
+ @retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents of Acb are invalid. The ATA
+ command was not sent, so no additional status information is available.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruPassThru (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplierPort,
+ IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet,
+ IN EFI_EVENT Event OPTIONAL
+ )
+{
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+ LIST_ENTRY *Node;
+ EFI_ATA_DEVICE_INFO *DeviceInfo;
+ EFI_IDENTIFY_DATA *IdentifyData;
+ UINT64 Capacity;
+ UINT32 MaxSectorCount;
+ ATA_NONBLOCK_TASK *Task;
+ EFI_TPL OldTpl;
+ UINT32 BlockSize;
+
+ Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ if ((This->Mode->IoAlign > 1) && !IS_ALIGNED(Packet->InDataBuffer, This->Mode->IoAlign)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((This->Mode->IoAlign > 1) && !IS_ALIGNED(Packet->OutDataBuffer, This->Mode->IoAlign)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((This->Mode->IoAlign > 1) && !IS_ALIGNED(Packet->Asb, This->Mode->IoAlign)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Node = SearchDeviceInfoList (Instance, Port, PortMultiplierPort, EfiIdeHarddisk);
+
+ if (Node == NULL) {
+ Node = SearchDeviceInfoList(Instance, Port, PortMultiplierPort, EfiIdeCdrom);
+ if (Node == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ //
+ // Check whether this device needs 48-bit addressing (ATAPI-6 ata device).
+ // Per ATA-6 spec, word83: bit15 is zero and bit14 is one.
+ // If bit10 is one, it means the ata device support 48-bit addressing.
+ //
+ DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
+ IdentifyData = DeviceInfo->IdentifyData;
+ MaxSectorCount = 0x100;
+ if ((IdentifyData->AtaData.command_set_supported_83 & (BIT10 | BIT15 | BIT14)) == 0x4400) {
+ Capacity = *((UINT64 *)IdentifyData->AtaData.maximum_lba_for_48bit_addressing);
+ if (Capacity > 0xFFFFFFF) {
+ //
+ // Capacity exceeds 120GB. 48-bit addressing is really needed
+ // In this case, the max sector count is 0x10000
+ //
+ MaxSectorCount = 0x10000;
+ }
+ }
+
+ BlockSize = 0x200;
+ if ((IdentifyData->AtaData.phy_logic_sector_support & (BIT14 | BIT15)) == BIT14) {
+ //
+ // Check logical block size
+ //
+ if ((IdentifyData->AtaData.phy_logic_sector_support & BIT12) != 0) {
+ BlockSize = (UINT32) (((IdentifyData->AtaData.logic_sector_size_hi << 16) | IdentifyData->AtaData.logic_sector_size_lo) * sizeof (UINT16));
+ }
+ }
+
+ //
+ // convert the transfer length from sector count to byte.
+ //
+ if (((Packet->Length & EFI_ATA_PASS_THRU_LENGTH_BYTES) == 0) &&
+ (Packet->InTransferLength != 0)) {
+ Packet->InTransferLength = Packet->InTransferLength * BlockSize;
+ }
+
+ //
+ // convert the transfer length from sector count to byte.
+ //
+ if (((Packet->Length & EFI_ATA_PASS_THRU_LENGTH_BYTES) == 0) &&
+ (Packet->OutTransferLength != 0)) {
+ Packet->OutTransferLength = Packet->OutTransferLength * BlockSize;
+ }
+
+ //
+ // If the data buffer described by InDataBuffer/OutDataBuffer and InTransferLength/OutTransferLength
+ // is too big to be transferred in a single command, then no data is transferred and EFI_BAD_BUFFER_SIZE
+ // is returned.
+ //
+ if (((Packet->InTransferLength != 0) && (Packet->InTransferLength > MaxSectorCount * BlockSize)) ||
+ ((Packet->OutTransferLength != 0) && (Packet->OutTransferLength > MaxSectorCount * BlockSize))) {
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ //
+ // For non-blocking mode, queue the Task into the list.
+ //
+ if (Event != NULL) {
+ Task = AllocateZeroPool (sizeof (ATA_NONBLOCK_TASK));
+ if (Task == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Task->Signature = ATA_NONBLOCKING_TASK_SIGNATURE;
+ Task->Port = Port;
+ Task->PortMultiplier = PortMultiplierPort;
+ Task->Packet = Packet;
+ Task->Event = Event;
+ Task->IsStart = FALSE;
+ Task->RetryTimes = DivU64x32(Packet->Timeout, 1000) + 1;
+ if (Packet->Timeout == 0) {
+ Task->InfiniteWait = TRUE;
+ } else {
+ Task->InfiniteWait = FALSE;
+ }
+
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+ InsertTailList (&Instance->NonBlockingTaskList, &Task->Link);
+ gBS->RestoreTPL (OldTpl);
+
+ return EFI_SUCCESS;
+ } else {
+ return AtaPassThruPassThruExecute (
+ Port,
+ PortMultiplierPort,
+ Packet,
+ Instance,
+ NULL
+ );
+ }
+}
+
+/**
+ Used to retrieve the list of legal port numbers for ATA devices on an ATA controller.
+ These can either be the list of ports where ATA devices are actually present or the
+ list of legal port numbers for the ATA controller. Regardless, the caller of this
+ function must probe the port number returned to see if an ATA device is actually
+ present at that location on the ATA controller.
+
+ The GetNextPort() function retrieves the port number on an ATA controller. If on input
+ Port is 0xFFFF, then the port number of the first port on the ATA controller is returned
+ in Port and EFI_SUCCESS is returned.
+
+ If Port is a port number that was returned on a previous call to GetNextPort(), then the
+ port number of the next port on the ATA controller is returned in Port, and EFI_SUCCESS
+ is returned. If Port is not 0xFFFF and Port was not returned on a previous call to
+ GetNextPort(), then EFI_INVALID_PARAMETER is returned.
+
+ If Port is the port number of the last port on the ATA controller, then EFI_NOT_FOUND is
+ returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in, out] Port On input, a pointer to the port number on the ATA controller.
+ On output, a pointer to the next port number on the ATA
+ controller. An input value of 0xFFFF retrieves the first port
+ number on the ATA controller.
+
+ @retval EFI_SUCCESS The next port number on the ATA controller was returned in Port.
+ @retval EFI_NOT_FOUND There are no more ports on this ATA controller.
+ @retval EFI_INVALID_PARAMETER Port is not 0xFFFF and Port was not returned on a previous call
+ to GetNextPort().
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruGetNextPort (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT16 *Port
+ )
+{
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+ LIST_ENTRY *Node;
+ EFI_ATA_DEVICE_INFO *DeviceInfo;
+
+ Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ if (Port == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (*Port == 0xFFFF) {
+ //
+ // If the Port is all 0xFF's, start to traverse the device list from the beginning
+ //
+ Node = GetFirstNode (&Instance->DeviceList);
+
+ while (!IsNull (&Instance->DeviceList, Node)) {
+ DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
+
+ if (DeviceInfo->Type == EfiIdeHarddisk) {
+ *Port = DeviceInfo->Port;
+ goto Exit;
+ }
+
+ Node = GetNextNode (&Instance->DeviceList, Node);
+ }
+
+ return EFI_NOT_FOUND;
+ } else if (*Port == Instance->PreviousPort) {
+ Node = GetFirstNode (&Instance->DeviceList);
+
+ while (!IsNull (&Instance->DeviceList, Node)) {
+ DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
+
+ if ((DeviceInfo->Type == EfiIdeHarddisk) &&
+ (DeviceInfo->Port > *Port)){
+ *Port = DeviceInfo->Port;
+ goto Exit;
+ }
+
+ Node = GetNextNode (&Instance->DeviceList, Node);
+ }
+
+ return EFI_NOT_FOUND;
+ } else {
+ //
+ // Port is not equal to 0xFFFF and also not equal to previous return value
+ //
+ return EFI_INVALID_PARAMETER;
+ }
+
+Exit:
+ //
+ // Update the PreviousPort and PreviousPortMultiplier.
+ //
+ Instance->PreviousPort = *Port;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Used to retrieve the list of legal port multiplier port numbers for ATA devices on a port of an ATA
+ controller. These can either be the list of port multiplier ports where ATA devices are actually
+ present on port or the list of legal port multiplier ports on that port. Regardless, the caller of this
+ function must probe the port number and port multiplier port number returned to see if an ATA
+ device is actually present.
+
+ The GetNextDevice() function retrieves the port multiplier port number of an ATA device
+ present on a port of an ATA controller.
+
+ If PortMultiplierPort points to a port multiplier port number value that was returned on a
+ previous call to GetNextDevice(), then the port multiplier port number of the next ATA device
+ on the port of the ATA controller is returned in PortMultiplierPort, and EFI_SUCCESS is
+ returned.
+
+ If PortMultiplierPort points to 0xFFFF, then the port multiplier port number of the first
+ ATA device on port of the ATA controller is returned in PortMultiplierPort and
+ EFI_SUCCESS is returned.
+
+ If PortMultiplierPort is not 0xFFFF and the value pointed to by PortMultiplierPort
+ was not returned on a previous call to GetNextDevice(), then EFI_INVALID_PARAMETER
+ is returned.
+
+ If PortMultiplierPort is the port multiplier port number of the last ATA device on the port of
+ the ATA controller, then EFI_NOT_FOUND is returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] Port The port number present on the ATA controller.
+ @param[in, out] PortMultiplierPort On input, a pointer to the port multiplier port number of an
+ ATA device present on the ATA controller.
+ If on input a PortMultiplierPort of 0xFFFF is specified,
+ then the port multiplier port number of the first ATA device
+ is returned. On output, a pointer to the port multiplier port
+ number of the next ATA device present on an ATA controller.
+
+ @retval EFI_SUCCESS The port multiplier port number of the next ATA device on the port
+ of the ATA controller was returned in PortMultiplierPort.
+ @retval EFI_NOT_FOUND There are no more ATA devices on this port of the ATA controller.
+ @retval EFI_INVALID_PARAMETER PortMultiplierPort is not 0xFFFF, and PortMultiplierPort was not
+ returned on a previous call to GetNextDevice().
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruGetNextDevice (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN UINT16 Port,
+ IN OUT UINT16 *PortMultiplierPort
+ )
+{
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+ LIST_ENTRY *Node;
+ EFI_ATA_DEVICE_INFO *DeviceInfo;
+
+ Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ if (PortMultiplierPort == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (*PortMultiplierPort == 0xFFFF) {
+ //
+ // If the PortMultiplierPort is all 0xFF's, start to traverse the device list from the beginning
+ //
+ Node = GetFirstNode (&Instance->DeviceList);
+
+ while (!IsNull (&Instance->DeviceList, Node)) {
+ DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
+
+ if ((DeviceInfo->Type == EfiIdeHarddisk) &&
+ (DeviceInfo->Port == Port)){
+ *PortMultiplierPort = DeviceInfo->PortMultiplier;
+ goto Exit;
+ }
+
+ Node = GetNextNode (&Instance->DeviceList, Node);
+ }
+
+ return EFI_NOT_FOUND;
+ } else if (*PortMultiplierPort == Instance->PreviousPortMultiplier) {
+ Node = GetFirstNode (&Instance->DeviceList);
+
+ while (!IsNull (&Instance->DeviceList, Node)) {
+ DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
+
+ if ((DeviceInfo->Type == EfiIdeHarddisk) &&
+ (DeviceInfo->Port == Port) &&
+ (DeviceInfo->PortMultiplier > *PortMultiplierPort)){
+ *PortMultiplierPort = DeviceInfo->PortMultiplier;
+ goto Exit;
+ }
+
+ Node = GetNextNode (&Instance->DeviceList, Node);
+ }
+
+ return EFI_NOT_FOUND;
+ } else {
+ //
+ // PortMultiplierPort is not equal to 0xFFFF and also not equal to previous return value
+ //
+ return EFI_INVALID_PARAMETER;
+ }
+
+Exit:
+ //
+ // Update the PreviousPort and PreviousPortMultiplier.
+ //
+ Instance->PreviousPortMultiplier = *PortMultiplierPort;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Used to allocate and build a device path node for an ATA device on an ATA controller.
+
+ The BuildDevicePath() function allocates and builds a single device node for the ATA
+ device specified by Port and PortMultiplierPort. If the ATA device specified by Port and
+ PortMultiplierPort is not present on the ATA controller, then EFI_NOT_FOUND is returned.
+ If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. If there are not enough
+ resources to allocate the device path node, then EFI_OUT_OF_RESOURCES is returned.
+
+ Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of
+ DevicePath are initialized to describe the ATA device specified by Port and PortMultiplierPort,
+ and EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] Port Port specifies the port number of the ATA device for which a
+ device path node is to be allocated and built.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device for which a
+ device path node is to be allocated and built. If there is no
+ port multiplier, then specify 0.
+ @param[in, out] DevicePath A pointer to a single device path node that describes the ATA
+ device specified by Port and PortMultiplierPort. This function
+ is responsible for allocating the buffer DevicePath with the
+ boot service AllocatePool(). It is the caller's responsibility
+ to free DevicePath when the caller is finished with DevicePath.
+ @retval EFI_SUCCESS The device path node that describes the ATA device specified by
+ Port and PortMultiplierPort was allocated and returned in DevicePath.
+ @retval EFI_NOT_FOUND The ATA device specified by Port and PortMultiplierPort does not
+ exist on the ATA controller.
+ @retval EFI_INVALID_PARAMETER DevicePath is NULL.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruBuildDevicePath (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplierPort,
+ IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ )
+{
+ EFI_DEV_PATH *DevicePathNode;
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+ LIST_ENTRY *Node;
+
+ Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ //
+ // Validate parameters passed in.
+ //
+ if (DevicePath == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Node = SearchDeviceInfoList(Instance, Port, PortMultiplierPort, EfiIdeHarddisk);
+ if (Node == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ if (Instance->Mode == EfiAtaIdeMode) {
+ DevicePathNode = AllocateCopyPool (sizeof (ATAPI_DEVICE_PATH), &mAtapiDevicePathTemplate);
+ if (DevicePathNode == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ DevicePathNode->Atapi.PrimarySecondary = (UINT8) Port;
+ DevicePathNode->Atapi.SlaveMaster = (UINT8) PortMultiplierPort;
+ DevicePathNode->Atapi.Lun = 0;
+ } else {
+ DevicePathNode = AllocateCopyPool (sizeof (SATA_DEVICE_PATH), &mSataDevicePathTemplate);
+ if (DevicePathNode == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ DevicePathNode->Sata.HBAPortNumber = Port;
+ DevicePathNode->Sata.PortMultiplierPortNumber = PortMultiplierPort;
+ DevicePathNode->Sata.Lun = 0;
+ }
+
+ *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *) DevicePathNode;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Used to translate a device path node to a port number and port multiplier port number.
+
+ The GetDevice() function determines the port and port multiplier port number associated with
+ the ATA device described by DevicePath. If DevicePath is a device path node type that the
+ ATA Pass Thru driver supports, then the ATA Pass Thru driver will attempt to translate the contents
+ DevicePath into a port number and port multiplier port number.
+
+ If this translation is successful, then that port number and port multiplier port number are returned
+ in Port and PortMultiplierPort, and EFI_SUCCESS is returned.
+
+ If DevicePath, Port, or PortMultiplierPort are NULL, then EFI_INVALID_PARAMETER is returned.
+
+ If DevicePath is not a device path node type that the ATA Pass Thru driver supports, then
+ EFI_UNSUPPORTED is returned.
+
+ If DevicePath is a device path node type that the ATA Pass Thru driver supports, but there is not
+ a valid translation from DevicePath to a port number and port multiplier port number, then
+ EFI_NOT_FOUND is returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] DevicePath A pointer to the device path node that describes an ATA device on the
+ ATA controller.
+ @param[out] Port On return, points to the port number of an ATA device on the ATA controller.
+ @param[out] PortMultiplierPort On return, points to the port multiplier port number of an ATA device
+ on the ATA controller.
+
+ @retval EFI_SUCCESS DevicePath was successfully translated to a port number and port multiplier
+ port number, and they were returned in Port and PortMultiplierPort.
+ @retval EFI_INVALID_PARAMETER DevicePath is NULL.
+ @retval EFI_INVALID_PARAMETER Port is NULL.
+ @retval EFI_INVALID_PARAMETER PortMultiplierPort is NULL.
+ @retval EFI_UNSUPPORTED This driver does not support the device path node type in DevicePath.
+ @retval EFI_NOT_FOUND A valid translation from DevicePath to a port number and port multiplier
+ port number does not exist.
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruGetDevice (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ OUT UINT16 *Port,
+ OUT UINT16 *PortMultiplierPort
+ )
+{
+ EFI_DEV_PATH *DevicePathNode;
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+ LIST_ENTRY *Node;
+
+ Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ //
+ // Validate parameters passed in.
+ //
+ if (DevicePath == NULL || Port == NULL || PortMultiplierPort == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check whether the DevicePath belongs to SCSI_DEVICE_PATH or ATAPI_DEVICE_PATH
+ //
+ if ((DevicePath->Type != MESSAGING_DEVICE_PATH) ||
+ ((DevicePath->SubType != MSG_SATA_DP) &&
+ (DevicePath->SubType != MSG_ATAPI_DP)) ||
+ ((DevicePathNodeLength(DevicePath) != sizeof(ATAPI_DEVICE_PATH)) &&
+ (DevicePathNodeLength(DevicePath) != sizeof(SATA_DEVICE_PATH)))) {
+ return EFI_UNSUPPORTED;
+ }
+
+ DevicePathNode = (EFI_DEV_PATH *) DevicePath;
+
+ if (Instance->Mode == EfiAtaIdeMode) {
+ *Port = DevicePathNode->Atapi.PrimarySecondary;
+ *PortMultiplierPort = DevicePathNode->Atapi.SlaveMaster;
+ } else {
+ *Port = DevicePathNode->Sata.HBAPortNumber;
+ *PortMultiplierPort = DevicePathNode->Sata.PortMultiplierPortNumber;
+ }
+
+ Node = SearchDeviceInfoList(Instance, *Port, *PortMultiplierPort, EfiIdeHarddisk);
+
+ if (Node == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Resets a specific port on the ATA controller. This operation also resets all the ATA devices
+ connected to the port.
+
+ The ResetChannel() function resets an a specific port on an ATA controller. This operation
+ resets all the ATA devices connected to that port. If this ATA controller does not support
+ a reset port operation, then EFI_UNSUPPORTED is returned.
+
+ If a device error occurs while executing that port reset operation, then EFI_DEVICE_ERROR is
+ returned.
+
+ If a timeout occurs during the execution of the port reset operation, then EFI_TIMEOUT is returned.
+
+ If the port reset operation is completed, then EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] Port The port number on the ATA controller.
+
+ @retval EFI_SUCCESS The ATA controller port was reset.
+ @retval EFI_UNSUPPORTED The ATA controller does not support a port reset operation.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA port.
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA port.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruResetPort (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN UINT16 Port
+ )
+{
+ //
+ // Return success directly then upper layer driver could think reset port operation is done.
+ //
+ return EFI_SUCCESS;
+}
+
+/**
+ Resets an ATA device that is connected to an ATA controller.
+
+ The ResetDevice() function resets the ATA device specified by Port and PortMultiplierPort.
+ If this ATA controller does not support a device reset operation, then EFI_UNSUPPORTED is
+ returned.
+
+ If Port or PortMultiplierPort are not in a valid range for this ATA controller, then
+ EFI_INVALID_PARAMETER is returned.
+
+ If a device error occurs while executing that device reset operation, then EFI_DEVICE_ERROR
+ is returned.
+
+ If a timeout occurs during the execution of the device reset operation, then EFI_TIMEOUT is
+ returned.
+
+ If the device reset operation is completed, then EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] Port Port represents the port number of the ATA device to be reset.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device to reset.
+ If there is no port multiplier, then specify 0.
+ @retval EFI_SUCCESS The ATA device specified by Port and PortMultiplierPort was reset.
+ @retval EFI_UNSUPPORTED The ATA controller does not support a device reset operation.
+ @retval EFI_INVALID_PARAMETER Port or PortMultiplierPort are invalid.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA device
+ specified by Port and PortMultiplierPort.
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA device
+ specified by Port and PortMultiplierPort.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruResetDevice (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplierPort
+ )
+{
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+ LIST_ENTRY *Node;
+
+ Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ Node = SearchDeviceInfoList (Instance, Port, PortMultiplierPort, EfiIdeHarddisk);
+
+ if (Node == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Return success directly then upper layer driver could think reset device operation is done.
+ //
+ return EFI_SUCCESS;
+}
+
+/**
+ Sumbit ATAPI request sense command.
+
+ @param[in] This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param[in] Target The Target is an array of size TARGET_MAX_BYTES and it represents
+ the id of the SCSI device to send the SCSI Request Packet. Each
+ transport driver may choose to utilize a subset of this size to suit the needs
+ of transport target representation. For example, a Fibre Channel driver
+ may use only 8 bytes (WWN) to represent an FC target.
+ @param[in] Lun The LUN of the SCSI device to send the SCSI Request Packet.
+ @param[in] SenseData A pointer to store sense data.
+ @param[in] SenseDataLength The sense data length.
+ @param[in] Timeout The timeout value to execute this cmd, uses 100ns as a unit.
+
+ @retval EFI_SUCCESS Send out the ATAPI packet command successfully.
+ @retval EFI_DEVICE_ERROR The device failed to send data.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPacketRequestSense (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun,
+ IN VOID *SenseData,
+ IN UINT8 SenseDataLength,
+ IN UINT64 Timeout
+ )
+{
+ EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET Packet;
+ UINT8 Cdb[12];
+ EFI_STATUS Status;
+
+ ZeroMem (&Packet, sizeof (EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET));
+ ZeroMem (Cdb, 12);
+
+ Cdb[0] = ATA_CMD_REQUEST_SENSE;
+ Cdb[4] = SenseDataLength;
+
+ Packet.Timeout = Timeout;
+ Packet.Cdb = Cdb;
+ Packet.CdbLength = 12;
+ Packet.DataDirection = EFI_EXT_SCSI_DATA_DIRECTION_READ;
+ Packet.InDataBuffer = SenseData;
+ Packet.InTransferLength = SenseDataLength;
+
+ Status = ExtScsiPassThruPassThru (This, Target, Lun, &Packet, NULL);
+
+ return Status;
+}
+
+/**
+ Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel. This function
+ supports both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the
+ nonblocking I/O functionality is optional.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target The Target is an array of size TARGET_MAX_BYTES and it represents
+ the id of the SCSI device to send the SCSI Request Packet. Each
+ transport driver may choose to utilize a subset of this size to suit the needs
+ of transport target representation. For example, a Fibre Channel driver
+ may use only 8 bytes (WWN) to represent an FC target.
+ @param Lun The LUN of the SCSI device to send the SCSI Request Packet.
+ @param Packet A pointer to the SCSI Request Packet to send to the SCSI device
+ specified by Target and Lun.
+ @param Event If nonblocking I/O is not supported then Event is ignored, and blocking
+ I/O is performed. If Event is NULL, then blocking I/O is performed. If
+ Event is not NULL and non blocking I/O is supported, then
+ nonblocking I/O is performed, and Event will be signaled when the
+ SCSI Request Packet completes.
+
+ @retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For bi-directional
+ commands, InTransferLength bytes were transferred from
+ InDataBuffer. For write and bi-directional commands,
+ OutTransferLength bytes were transferred by
+ OutDataBuffer.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was not executed. The number of bytes that
+ could be transferred is returned in InTransferLength. For write
+ and bi-directional commands, OutTransferLength bytes were
+ transferred by OutDataBuffer.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
+ SCSI Request Packets already queued. The caller may retry again later.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SCSI Request
+ Packet.
+ @retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket are invalid.
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported
+ by the host adapter. This includes the case of Bi-directional SCSI
+ commands not supported by the implementation. The SCSI Request
+ Packet was not sent, so no additional status information is available.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruPassThru (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun,
+ IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
+ IN EFI_EVENT Event OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+ UINT8 Port;
+ UINT8 PortMultiplier;
+ EFI_ATA_HC_WORK_MODE Mode;
+ LIST_ENTRY *Node;
+ EFI_ATA_DEVICE_INFO *DeviceInfo;
+ BOOLEAN SenseReq;
+ EFI_SCSI_SENSE_DATA *PtrSenseData;
+ UINTN SenseDataLen;
+ EFI_STATUS SenseStatus;
+
+ SenseDataLen = 0;
+ Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ if ((Packet == NULL) || (Packet->Cdb == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Don't support variable length CDB
+ //
+ if ((Packet->CdbLength != 6) && (Packet->CdbLength != 10) &&
+ (Packet->CdbLength != 12) && (Packet->CdbLength != 16)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((Packet->SenseDataLength != 0) && (Packet->SenseData == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((This->Mode->IoAlign > 1) && !IS_ALIGNED(Packet->InDataBuffer, This->Mode->IoAlign)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((This->Mode->IoAlign > 1) && !IS_ALIGNED(Packet->OutDataBuffer, This->Mode->IoAlign)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((This->Mode->IoAlign > 1) && !IS_ALIGNED(Packet->SenseData, This->Mode->IoAlign)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // For ATAPI device, doesn't support multiple LUN device.
+ //
+ if (Lun != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // The layout of Target array:
+ // ________________________________________________________________________
+ // | Byte 0 | Byte 1 | ... | TARGET_MAX_BYTES - 1 |
+ // |_____________________|_____________________|_____|______________________|
+ // | | The port multiplier | | |
+ // | The port number | port number | N/A | N/A |
+ // |_____________________|_____________________|_____|______________________|
+ //
+ // For ATAPI device, 2 bytes is enough to represent the location of SCSI device.
+ //
+ Port = Target[0];
+ PortMultiplier = Target[1];
+
+ Node = SearchDeviceInfoList(Instance, Port, PortMultiplier, EfiIdeCdrom);
+ if (Node == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
+
+ //
+ // ATA_CMD_IDENTIFY_DEVICE cmd is a ATA cmd but not a SCSI cmd.
+ // Normally it should NOT be passed down through ExtScsiPassThru protocol interface.
+ // But to response EFI_DISK_INFO.Identify() request from ScsiDisk, we should handle this command.
+ //
+ if (*((UINT8*)Packet->Cdb) == ATA_CMD_IDENTIFY_DEVICE) {
+ CopyMem (Packet->InDataBuffer, DeviceInfo->IdentifyData, sizeof (EFI_IDENTIFY_DATA));
+ //
+ // For IDENTIFY DEVICE cmd, we don't need to get sense data.
+ //
+ Packet->SenseDataLength = 0;
+ return EFI_SUCCESS;
+ }
+
+ Mode = Instance->Mode;
+ switch (Mode) {
+ case EfiAtaIdeMode:
+ //
+ // Reassign IDE mode io port registers' base addresses
+ //
+ Status = GetIdeRegisterIoAddr (Instance->PciIo, Instance->IdeRegisters);
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = AtaPacketCommandExecute (Instance->PciIo, &Instance->IdeRegisters[Port], Port, PortMultiplier, Packet);
+ break;
+ case EfiAtaAhciMode:
+ Status = AhciPacketCommandExecute (Instance->PciIo, &Instance->AhciRegisters, Port, PortMultiplier, Packet);
+ break;
+ default :
+ Status = EFI_DEVICE_ERROR;
+ break;
+ }
+
+ //
+ // If the cmd doesn't get executed correctly, then check sense data.
+ //
+ if (EFI_ERROR (Status) && (Packet->SenseDataLength != 0) && (*((UINT8*)Packet->Cdb) != ATA_CMD_REQUEST_SENSE)) {
+ PtrSenseData = AllocateAlignedPages (EFI_SIZE_TO_PAGES (sizeof (EFI_SCSI_SENSE_DATA)), This->Mode->IoAlign);
+ if (PtrSenseData == NULL) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ for (SenseReq = TRUE; SenseReq;) {
+ SenseStatus = AtaPacketRequestSense (
+ This,
+ Target,
+ Lun,
+ PtrSenseData,
+ sizeof (EFI_SCSI_SENSE_DATA),
+ Packet->Timeout
+ );
+ if (EFI_ERROR (SenseStatus)) {
+ break;
+ }
+
+ CopyMem ((UINT8*)Packet->SenseData + SenseDataLen, PtrSenseData, sizeof (EFI_SCSI_SENSE_DATA));
+ SenseDataLen += sizeof (EFI_SCSI_SENSE_DATA);
+
+ //
+ // no more sense key or number of sense keys exceeds predefined,
+ // skip the loop.
+ //
+ if ((PtrSenseData->Sense_Key == EFI_SCSI_SK_NO_SENSE) ||
+ (SenseDataLen + sizeof (EFI_SCSI_SENSE_DATA) > Packet->SenseDataLength)) {
+ SenseReq = FALSE;
+ }
+ }
+ FreeAlignedPages (PtrSenseData, EFI_SIZE_TO_PAGES (sizeof (EFI_SCSI_SENSE_DATA)));
+ }
+ //
+ // Update the SenseDataLength field to the data length received.
+ //
+ Packet->SenseDataLength = (UINT8)SenseDataLen;
+ return Status;
+}
+
+/**
+ Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on a SCSI channel. These
+ can either be the list SCSI devices that are actually present on the SCSI channel, or the list of legal
+ Target Ids and LUNs for the SCSI channel. Regardless, the caller of this function must probe the
+ Target ID and LUN returned to see if a SCSI device is actually present at that location on the SCSI
+ channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target On input, a pointer to the Target ID (an array of size
+ TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
+ On output, a pointer to the Target ID (an array of
+ TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
+ channel. An input value of 0xF(all bytes in the array are 0xF) in the
+ Target array retrieves the Target ID of the first SCSI device present on a
+ SCSI channel.
+ @param Lun On input, a pointer to the LUN of a SCSI device present on the SCSI
+ channel. On output, a pointer to the LUN of the next SCSI device present
+ on a SCSI channel.
+
+ @retval EFI_SUCCESS The Target ID and LUN of the next SCSI device on the SCSI
+ channel was returned in Target and Lun.
+ @retval EFI_INVALID_PARAMETER Target array is not all 0xF, and Target and Lun were
+ not returned on a previous call to GetNextTargetLun().
+ @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruGetNextTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 **Target,
+ IN OUT UINT64 *Lun
+ )
+{
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+ LIST_ENTRY *Node;
+ EFI_ATA_DEVICE_INFO *DeviceInfo;
+ UINT8 *Target8;
+ UINT16 *Target16;
+
+ Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ if (Target == NULL || Lun == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (*Target == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Target8 = *Target;
+ Target16 = (UINT16 *)*Target;
+
+ if (CompareMem(Target8, mScsiId, TARGET_MAX_BYTES) != 0) {
+ //
+ // For ATAPI device, we use 2 least significant bytes to represent the location of SCSI device.
+ // So the higher bytes in Target array should be 0xFF.
+ //
+ if (CompareMem (&Target8[2], &mScsiId[2], TARGET_MAX_BYTES - 2) != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // When Target is not all 0xFF's, compare 2 least significant bytes with
+ // previous target id to see if it is returned by previous call.
+ //
+ if ((*Target16 != Instance->PreviousTargetId) ||
+ (*Lun != Instance->PreviousLun)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Traverse the whole device list to find the next cdrom closed to
+ // the device signified by Target[0] and Target[1].
+ //
+ // Note that we here use a tricky way to find the next cdrom :
+ // All ata devices are detected and inserted into the device list
+ // sequentially.
+ //
+ Node = GetFirstNode (&Instance->DeviceList);
+
+ while (!IsNull (&Instance->DeviceList, Node)) {
+ DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
+
+ if ((DeviceInfo->Type == EfiIdeCdrom) &&
+ ((Target8[0] < DeviceInfo->Port) ||
+ ((Target8[0] == DeviceInfo->Port) &&
+ (Target8[1] < DeviceInfo->PortMultiplier)))) {
+ Target8[0] = (UINT8)DeviceInfo->Port;
+ Target8[1] = (UINT8)DeviceInfo->PortMultiplier;
+ goto Exit;
+ }
+
+ Node = GetNextNode (&Instance->DeviceList, Node);
+ }
+
+ return EFI_NOT_FOUND;
+ } else {
+ //
+ // If the array is all 0xFF's, start to traverse the device list from the beginning
+ //
+ Node = GetFirstNode (&Instance->DeviceList);
+ while (!IsNull (&Instance->DeviceList, Node)) {
+ DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
+
+ if (DeviceInfo->Type == EfiIdeCdrom) {
+ Target8[0] = (UINT8)DeviceInfo->Port;
+ Target8[1] = (UINT8)DeviceInfo->PortMultiplier;
+ goto Exit;
+ }
+
+ Node = GetNextNode (&Instance->DeviceList, Node);
+ }
+
+ return EFI_NOT_FOUND;
+ }
+
+Exit:
+ *Lun = 0;
+
+ //
+ // Update the PreviousTargetId.
+ //
+ Instance->PreviousTargetId = *Target16;
+ Instance->PreviousLun = *Lun;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Used to allocate and build a device path node for a SCSI device on a SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target The Target is an array of size TARGET_MAX_BYTES and it specifies the
+ Target ID of the SCSI device for which a device path node is to be
+ allocated and built. Transport drivers may chose to utilize a subset of
+ this size to suit the representation of targets. For example, a Fibre
+ Channel driver may use only 8 bytes (WWN) in the array to represent a
+ FC target.
+ @param Lun The LUN of the SCSI device for which a device path node is to be
+ allocated and built.
+ @param DevicePath A pointer to a single device path node that describes the SCSI device
+ specified by Target and Lun. This function is responsible for
+ allocating the buffer DevicePath with the boot service
+ AllocatePool(). It is the caller's responsibility to free
+ DevicePath when the caller is finished with DevicePath.
+
+ @retval EFI_SUCCESS The device path node that describes the SCSI device specified by
+ Target and Lun was allocated and returned in
+ DevicePath.
+ @retval EFI_INVALID_PARAMETER DevicePath is NULL.
+ @retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does not exist
+ on the SCSI channel.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruBuildDevicePath (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun,
+ IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ )
+{
+ EFI_DEV_PATH *DevicePathNode;
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+ UINT8 Port;
+ UINT8 PortMultiplier;
+
+ Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ Port = Target[0];
+ PortMultiplier = Target[1];
+
+ //
+ // Validate parameters passed in.
+ //
+ if (DevicePath == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // can not build device path for the SCSI Host Controller.
+ //
+ if (Lun != 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ if (SearchDeviceInfoList(Instance, Port, PortMultiplier, EfiIdeCdrom) == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ if (Instance->Mode == EfiAtaIdeMode) {
+ DevicePathNode = AllocateCopyPool (sizeof (ATAPI_DEVICE_PATH), &mAtapiDevicePathTemplate);
+ if (DevicePathNode == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ DevicePathNode->Atapi.PrimarySecondary = Port;
+ DevicePathNode->Atapi.SlaveMaster = PortMultiplier;
+ DevicePathNode->Atapi.Lun = (UINT16) Lun;
+ } else {
+ DevicePathNode = AllocateCopyPool (sizeof (SATA_DEVICE_PATH), &mSataDevicePathTemplate);
+ if (DevicePathNode == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ DevicePathNode->Sata.HBAPortNumber = Port;
+ DevicePathNode->Sata.PortMultiplierPortNumber = PortMultiplier;
+ DevicePathNode->Sata.Lun = (UINT16) Lun;
+ }
+
+ *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *) DevicePathNode;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Used to translate a device path node to a Target ID and LUN.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param DevicePath A pointer to a single device path node that describes the SCSI device
+ on the SCSI channel.
+ @param Target A pointer to the Target Array which represents the ID of a SCSI device
+ on the SCSI channel.
+ @param Lun A pointer to the LUN of a SCSI device on the SCSI channel.
+
+ @retval EFI_SUCCESS DevicePath was successfully translated to a Target ID and
+ LUN, and they were returned in Target and Lun.
+ @retval EFI_INVALID_PARAMETER DevicePath or Target or Lun is NULL.
+ @retval EFI_NOT_FOUND A valid translation from DevicePath to a Target ID and LUN
+ does not exist.
+ @retval EFI_UNSUPPORTED This driver does not support the device path node type in
+ DevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruGetTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ OUT UINT8 **Target,
+ OUT UINT64 *Lun
+ )
+{
+ EFI_DEV_PATH *DevicePathNode;
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+ LIST_ENTRY *Node;
+
+ Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ //
+ // Validate parameters passed in.
+ //
+ if (DevicePath == NULL || Target == NULL || Lun == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (*Target == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ //
+ // Check whether the DevicePath belongs to SCSI_DEVICE_PATH
+ //
+ if ((DevicePath->Type != MESSAGING_DEVICE_PATH) ||
+ ((DevicePath->SubType != MSG_ATAPI_DP) &&
+ (DevicePath->SubType != MSG_SATA_DP)) ||
+ ((DevicePathNodeLength(DevicePath) != sizeof(ATAPI_DEVICE_PATH)) &&
+ (DevicePathNodeLength(DevicePath) != sizeof(SATA_DEVICE_PATH)))) {
+ return EFI_UNSUPPORTED;
+ }
+
+ SetMem (*Target, TARGET_MAX_BYTES, 0xFF);
+
+ DevicePathNode = (EFI_DEV_PATH *) DevicePath;
+
+ if (Instance->Mode == EfiAtaIdeMode) {
+ (*Target)[0] = (UINT8) DevicePathNode->Atapi.PrimarySecondary;
+ (*Target)[1] = (UINT8) DevicePathNode->Atapi.SlaveMaster;
+ *Lun = (UINT8) DevicePathNode->Atapi.Lun;
+ } else {
+ (*Target)[0] = (UINT8) DevicePathNode->Sata.HBAPortNumber;
+ (*Target)[1] = (UINT8) DevicePathNode->Sata.PortMultiplierPortNumber;
+ *Lun = (UINT8) DevicePathNode->Sata.Lun;
+ }
+
+ Node = SearchDeviceInfoList(Instance, (*Target)[0], (*Target)[1], EfiIdeCdrom);
+
+ if (Node == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ if (*Lun != 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Resets a SCSI channel. This operation resets all the SCSI devices connected to the SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The SCSI channel was reset.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI channel.
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI channel.
+ @retval EFI_UNSUPPORTED The SCSI channel does not support a channel reset operation.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruResetChannel (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This
+ )
+{
+ //
+ // Return success directly then upper layer driver could think reset channel operation is done.
+ //
+ return EFI_SUCCESS;
+}
+
+/**
+ Resets a SCSI logical unit that is connected to a SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target The Target is an array of size TARGET_MAX_BYTE and it represents the
+ target port ID of the SCSI device containing the SCSI logical unit to
+ reset. Transport drivers may chose to utilize a subset of this array to suit
+ the representation of their targets.
+ @param Lun The LUN of the SCSI device to reset.
+
+ @retval EFI_SUCCESS The SCSI device specified by Target and Lun was reset.
+ @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI device
+ specified by Target and Lun.
+ @retval EFI_UNSUPPORTED The SCSI channel does not support a target reset operation.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI device
+ specified by Target and Lun.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruResetTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun
+ )
+{
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+ LIST_ENTRY *Node;
+ UINT8 Port;
+ UINT8 PortMultiplier;
+
+ Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+ //
+ // For ATAPI device, doesn't support multiple LUN device.
+ //
+ if (Lun != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+ //
+ // The layout of Target array:
+ // ________________________________________________________________________
+ // | Byte 0 | Byte 1 | ... | TARGET_MAX_BYTES - 1 |
+ // |_____________________|_____________________|_____|______________________|
+ // | | The port multiplier | | |
+ // | The port number | port number | N/A | N/A |
+ // |_____________________|_____________________|_____|______________________|
+ //
+ // For ATAPI device, 2 bytes is enough to represent the location of SCSI device.
+ //
+ Port = Target[0];
+ PortMultiplier = Target[1];
+
+ Node = SearchDeviceInfoList(Instance, Port, PortMultiplier, EfiIdeCdrom);
+ if (Node == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Return success directly then upper layer driver could think reset target LUN operation is done.
+ //
+ return EFI_SUCCESS;
+}
+
+/**
+ Used to retrieve the list of legal Target IDs for SCSI devices on a SCSI channel. These can either
+ be the list SCSI devices that are actually present on the SCSI channel, or the list of legal Target IDs
+ for the SCSI channel. Regardless, the caller of this function must probe the Target ID returned to
+ see if a SCSI device is actually present at that location on the SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target (TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
+ On output, a pointer to the Target ID (an array of
+ TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
+ channel. An input value of 0xF(all bytes in the array are 0xF) in the
+ Target array retrieves the Target ID of the first SCSI device present on a
+ SCSI channel.
+
+ @retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI
+ channel was returned in Target.
+ @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
+ @retval EFI_TIMEOUT Target array is not all 0xF, and Target was not
+ returned on a previous call to GetNextTarget().
+ @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruGetNextTarget (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 **Target
+ )
+{
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+ LIST_ENTRY *Node;
+ EFI_ATA_DEVICE_INFO *DeviceInfo;
+ UINT8 *Target8;
+ UINT16 *Target16;
+
+ Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ if (Target == NULL || *Target == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Target8 = *Target;
+ Target16 = (UINT16 *)*Target;
+
+ if (CompareMem(Target8, mScsiId, TARGET_MAX_BYTES) != 0) {
+ //
+ // For ATAPI device, we use 2 least significant bytes to represent the location of SCSI device.
+ // So the higher bytes in Target array should be 0xFF.
+ //
+ if (CompareMem (&Target8[2], &mScsiId[2], TARGET_MAX_BYTES - 2) != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // When Target is not all 0xFF's, compare 2 least significant bytes with
+ // previous target id to see if it is returned by previous call.
+ //
+ if (*Target16 != Instance->PreviousTargetId) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Traverse the whole device list to find the next cdrom closed to
+ // the device signified by Target[0] and Target[1].
+ //
+ // Note that we here use a tricky way to find the next cdrom :
+ // All ata devices are detected and inserted into the device list
+ // sequentially.
+ //
+ Node = GetFirstNode (&Instance->DeviceList);
+ while (!IsNull (&Instance->DeviceList, Node)) {
+ DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
+
+ if ((DeviceInfo->Type == EfiIdeCdrom) &&
+ ((Target8[0] < DeviceInfo->Port) ||
+ ((Target8[0] == DeviceInfo->Port) &&
+ (Target8[1] < DeviceInfo->PortMultiplier)))) {
+ Target8[0] = (UINT8)DeviceInfo->Port;
+ Target8[1] = (UINT8)DeviceInfo->PortMultiplier;
+ goto Exit;
+ }
+
+ Node = GetNextNode (&Instance->DeviceList, Node);
+ }
+
+ return EFI_NOT_FOUND;
+ } else {
+ //
+ // If the array is all 0xFF's, start to traverse the device list from the beginning
+ //
+ Node = GetFirstNode (&Instance->DeviceList);
+
+ while (!IsNull (&Instance->DeviceList, Node)) {
+ DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
+
+ if (DeviceInfo->Type == EfiIdeCdrom) {
+ Target8[0] = (UINT8)DeviceInfo->Port;
+ Target8[1] = (UINT8)DeviceInfo->PortMultiplier;
+ goto Exit;
+ }
+
+ Node = GetNextNode (&Instance->DeviceList, Node);
+ }
+
+ return EFI_NOT_FOUND;
+ }
+
+Exit:
+ //
+ // Update the PreviousTargetId.
+ //
+ Instance->PreviousTargetId = *Target16;
+
+ return EFI_SUCCESS;
+}
+
diff --git a/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h new file mode 100644 index 0000000000..6f3407c01a --- /dev/null +++ b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h @@ -0,0 +1,1300 @@ +/** @file
+ Header file for ATA/ATAPI PASS THRU driver.
+
+ Copyright (c) 2010 - 2012, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#ifndef __ATA_ATAPI_PASS_THRU_H__
+#define __ATA_ATAPI_PASS_THRU_H__
+
+#include <Uefi.h>
+
+#include <IndustryStandard/Pci.h>
+#include <IndustryStandard/Atapi.h>
+#include <IndustryStandard/Scsi.h>
+
+#include <Protocol/PciIo.h>
+#include <Protocol/IdeControllerInit.h>
+#include <Protocol/AtaPassThru.h>
+#include <Protocol/ScsiPassThruExt.h>
+
+#include <Library/DebugLib.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Library/PciLib.h>
+#include <Library/PcdLib.h>
+#include <Library/TimerLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/ReportStatusCodeLib.h>
+#include <Library/DevicePathLib.h>
+
+#include "IdeMode.h"
+#include "AhciMode.h"
+
+extern EFI_DRIVER_BINDING_PROTOCOL gAtaAtapiPassThruDriverBinding;
+extern EFI_COMPONENT_NAME_PROTOCOL gAtaAtapiPassThruComponentName;
+extern EFI_COMPONENT_NAME2_PROTOCOL gAtaAtapiPassThruComponentName2;
+
+#define ATA_ATAPI_PASS_THRU_SIGNATURE SIGNATURE_32 ('a', 'a', 'p', 't')
+#define ATA_ATAPI_DEVICE_SIGNATURE SIGNATURE_32 ('a', 'd', 'e', 'v')
+#define ATA_NONBLOCKING_TASK_SIGNATURE SIGNATURE_32 ('a', 't', 's', 'k')
+
+typedef struct _ATA_NONBLOCK_TASK ATA_NONBLOCK_TASK;
+
+typedef enum {
+ EfiAtaIdeMode,
+ EfiAtaAhciMode,
+ EfiAtaRaidMode,
+ EfiAtaUnknownMode
+} EFI_ATA_HC_WORK_MODE;
+
+typedef enum {
+ EfiIdeCdrom, /* ATAPI CDROM */
+ EfiIdeHarddisk, /* Hard Disk */
+ EfiPortMultiplier, /* Port Multiplier */
+ EfiIdeUnknown
+} EFI_ATA_DEVICE_TYPE;
+
+//
+// Ahci mode device info
+//
+typedef struct {
+ UINT32 Signature;
+ LIST_ENTRY Link;
+
+ UINT16 Port;
+ UINT16 PortMultiplier;
+ EFI_ATA_DEVICE_TYPE Type;
+
+ EFI_IDENTIFY_DATA *IdentifyData;
+} EFI_ATA_DEVICE_INFO;
+
+typedef struct {
+ UINT32 Signature;
+
+ EFI_HANDLE ControllerHandle;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeControllerInit;
+
+ EFI_ATA_PASS_THRU_MODE AtaPassThruMode;
+ EFI_ATA_PASS_THRU_PROTOCOL AtaPassThru;
+ EFI_EXT_SCSI_PASS_THRU_MODE ExtScsiPassThruMode;
+ EFI_EXT_SCSI_PASS_THRU_PROTOCOL ExtScsiPassThru;
+
+ EFI_ATA_HC_WORK_MODE Mode;
+
+ EFI_IDE_REGISTERS IdeRegisters[EfiIdeMaxChannel];
+ EFI_AHCI_REGISTERS AhciRegisters;
+
+ //
+ // The attached device list
+ //
+ LIST_ENTRY DeviceList;
+ UINT64 OriginalPciAttributes;
+
+ //
+ // For AtaPassThru protocol, using the following bytes to record the previous call in
+ // GetNextPort()/GetNextDevice().
+ //
+ UINT16 PreviousPort;
+ UINT16 PreviousPortMultiplier;
+ //
+ // For ExtScsiPassThru protocol, using the following bytes to record the previous call in
+ // GetNextTarget()/GetNextTargetLun().
+ //
+ UINT16 PreviousTargetId;
+ UINT64 PreviousLun;
+
+ //
+ // For Non-blocking.
+ //
+ EFI_EVENT TimerEvent;
+ LIST_ENTRY NonBlockingTaskList;
+} ATA_ATAPI_PASS_THRU_INSTANCE;
+
+//
+// Task for Non-blocking mode.
+//
+struct _ATA_NONBLOCK_TASK {
+ UINT32 Signature;
+ LIST_ENTRY Link;
+
+ UINT16 Port;
+ UINT16 PortMultiplier;
+ EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet;
+ BOOLEAN IsStart;
+ EFI_EVENT Event;
+ UINT64 RetryTimes;
+ BOOLEAN InfiniteWait;
+ VOID *Map; // Pointer to map.
+ VOID *TableMap; // Pointer to PRD table map.
+ EFI_ATA_DMA_PRD *MapBaseAddress; // Pointer to range Base address for Map.
+ UINTN PageCount; // The page numbers used by PCIO freebuffer.
+};
+
+//
+// Timeout value which uses 100ns as a unit.
+// It means 3 second span.
+//
+#define ATA_ATAPI_TIMEOUT EFI_TIMER_PERIOD_SECONDS(3)
+
+#define IS_ALIGNED(addr, size) (((UINTN) (addr) & (size - 1)) == 0)
+
+#define ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS(a) \
+ CR (a, \
+ ATA_ATAPI_PASS_THRU_INSTANCE, \
+ AtaPassThru, \
+ ATA_ATAPI_PASS_THRU_SIGNATURE \
+ )
+
+#define EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS(a) \
+ CR (a, \
+ ATA_ATAPI_PASS_THRU_INSTANCE, \
+ ExtScsiPassThru, \
+ ATA_ATAPI_PASS_THRU_SIGNATURE \
+ )
+
+#define ATA_ATAPI_DEVICE_INFO_FROM_THIS(a) \
+ CR (a, \
+ EFI_ATA_DEVICE_INFO, \
+ Link, \
+ ATA_ATAPI_DEVICE_SIGNATURE \
+ );
+
+#define ATA_NON_BLOCK_TASK_FROM_ENTRY(a) \
+ CR (a, \
+ ATA_NONBLOCK_TASK, \
+ Link, \
+ ATA_NONBLOCKING_TASK_SIGNATURE \
+ );
+
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+
+ @param DriverName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAtapiPassThruComponentNameGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ );
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ @param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ @param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAtapiPassThruComponentNameGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle OPTIONAL,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ );
+
+/**
+ Tests to see if this driver supports a given controller. If a child device is provided,
+ it further tests to see if this driver supports creating a handle for the specified child device.
+
+ This function checks to see if the driver specified by This supports the device specified by
+ ControllerHandle. Drivers will typically use the device path attached to
+ ControllerHandle and/or the services from the bus I/O abstraction attached to
+ ControllerHandle to determine if the driver supports ControllerHandle. This function
+ may be called many times during platform initialization. In order to reduce boot times, the tests
+ performed by this function must be very small, and take as little time as possible to execute. This
+ function must not change the state of any hardware devices, and this function must be aware that the
+ device specified by ControllerHandle may already be managed by the same driver or a
+ different driver. This function must match its calls to AllocatePages() with FreePages(),
+ AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
+ Because ControllerHandle may have been previously started by the same driver, if a protocol is
+ already in the opened state, then it must not be closed with CloseProtocol(). This is required
+ to guarantee the state of ControllerHandle is not modified by this function.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to test. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For bus drivers, if this parameter is not NULL, then
+ the bus driver must determine if the bus controller specified
+ by ControllerHandle and the child controller specified
+ by RemainingDevicePath are both supported by this
+ bus driver.
+
+ @retval EFI_SUCCESS The device specified by ControllerHandle and
+ RemainingDevicePath is supported by the driver specified by This.
+ @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by the driver
+ specified by This.
+ @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by a different
+ driver or an application that requires exclusive access.
+ Currently not implemented.
+ @retval EFI_UNSUPPORTED The device specified by ControllerHandle and
+ RemainingDevicePath is not supported by the driver specified by This.
+**/
+EFI_STATUS
+EFIAPI
+AtaAtapiPassThruSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ );
+
+/**
+ Starts a device controller or a bus controller.
+
+ The Start() function is designed to be invoked from the EFI boot service ConnectController().
+ As a result, much of the error checking on the parameters to Start() has been moved into this
+ common boot service. It is legal to call Start() from other locations,
+ but the following calling restrictions must be followed, or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE.
+ 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
+ EFI_DEVICE_PATH_PROTOCOL.
+ 3. Prior to calling Start(), the Supported() function for the driver specified by This must
+ have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to start. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For a bus driver, if this parameter is NULL, then handles
+ for all the children of Controller are created by this driver.
+ If this parameter is not NULL and the first Device Path Node is
+ not the End of Device Path Node, then only the handle for the
+ child device specified by the first Device Path Node of
+ RemainingDevicePath is created by this driver.
+ If the first Device Path Node of RemainingDevicePath is
+ the End of Device Path Node, no child handle is created by this
+ driver.
+
+ @retval EFI_SUCCESS The device was started.
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval Others The driver failded to start the device.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAtapiPassThruStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ );
+
+/**
+ Stops a device controller or a bus controller.
+
+ The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
+ As a result, much of the error checking on the parameters to Stop() has been moved
+ into this common boot service. It is legal to call Stop() from other locations,
+ but the following calling restrictions must be followed, or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
+ same driver's Start() function.
+ 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
+ EFI_HANDLE. In addition, all of these handles must have been created in this driver's
+ Start() function, and the Start() function must have called OpenProtocol() on
+ ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle A handle to the device being stopped. The handle must
+ support a bus specific I/O protocol for the driver
+ to use to stop the device.
+ @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
+ if NumberOfChildren is 0.
+
+ @retval EFI_SUCCESS The device was stopped.
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAtapiPassThruStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ );
+
+/**
+ Traverse the attached ATA devices list to find out the device to access.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+ @param[in] Port The port number of the ATA device to send the command.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
+ If there is no port multiplier, then specify 0.
+ @param[in] DeviceType The device type of the ATA device.
+
+ @retval The pointer to the data structure of the device info to access.
+
+**/
+LIST_ENTRY *
+EFIAPI
+SearchDeviceInfoList (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplier,
+ IN EFI_ATA_DEVICE_TYPE DeviceType
+ );
+
+/**
+ Allocate device info data structure to contain device info.
+ And insert the data structure to the tail of device list for tracing.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+ @param[in] Port The port number of the ATA device to send the command.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
+ If there is no port multiplier, then specify 0.
+ @param[in] DeviceType The device type of the ATA device.
+ @param[in] IdentifyData The data buffer to store the output of the IDENTIFY cmd.
+
+ @retval EFI_SUCCESS Successfully insert the ata device to the tail of device list.
+ @retval EFI_OUT_OF_RESOURCES Can not allocate enough resource for use.
+
+**/
+EFI_STATUS
+EFIAPI
+CreateNewDeviceInfo (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplier,
+ IN EFI_ATA_DEVICE_TYPE DeviceType,
+ IN EFI_IDENTIFY_DATA *IdentifyData
+ );
+
+/**
+ Destroy all attached ATA devices info.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+
+**/
+VOID
+EFIAPI
+DestroyDeviceInfoList (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
+ );
+
+/**
+ Destroy all pending non blocking tasks.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+ @param[in] IsSigEvent Indicate whether signal the task event when remove the
+ task.
+
+**/
+VOID
+EFIAPI
+DestroyAsynTaskList (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN BOOLEAN IsSigEvent
+ );
+
+/**
+ Enumerate all attached ATA devices at IDE mode or AHCI mode separately.
+
+ The function is designed to enumerate all attached ATA devices.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+
+ @retval EFI_SUCCESS Successfully enumerate attached ATA devices.
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+EnumerateAttachedDevice (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
+ );
+
+/**
+ Call back funtion when the timer event is signaled.
+
+ @param[in] Event The Event this notify function registered to.
+ @param[in] Context Pointer to the context data registered to the
+ Event.
+
+**/
+VOID
+EFIAPI
+AsyncNonBlockingTransferRoutine (
+ EFI_EVENT Event,
+ VOID* Context
+ );
+
+/**
+ Sends an ATA command to an ATA device that is attached to the ATA controller. This function
+ supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required,
+ and the non-blocking I/O functionality is optional.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] Port The port number of the ATA device to send the command.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
+ If there is no port multiplier, then specify 0.
+ @param[in, out] Packet A pointer to the ATA command to send to the ATA device specified by Port
+ and PortMultiplierPort.
+ @param[in] Event If non-blocking I/O is not supported then Event is ignored, and blocking
+ I/O is performed. If Event is NULL, then blocking I/O is performed. If
+ Event is not NULL and non blocking I/O is supported, then non-blocking
+ I/O is performed, and Event will be signaled when the ATA command completes.
+
+ @retval EFI_SUCCESS The ATA command was sent by the host. For bi-directional commands,
+ InTransferLength bytes were transferred from InDataBuffer. For write and
+ bi-directional commands, OutTransferLength bytes were transferred by OutDataBuffer.
+ @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number of bytes that could be transferred
+ is returned in InTransferLength. For write and bi-directional commands,
+ OutTransferLength bytes were transferred by OutDataBuffer.
+ @retval EFI_NOT_READY The ATA command could not be sent because there are too many ATA commands
+ already queued. The caller may retry again later.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the ATA command.
+ @retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents of Acb are invalid. The ATA
+ command was not sent, so no additional status information is available.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruPassThru (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplierPort,
+ IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet,
+ IN EFI_EVENT Event OPTIONAL
+ );
+
+/**
+ Used to retrieve the list of legal port numbers for ATA devices on an ATA controller.
+ These can either be the list of ports where ATA devices are actually present or the
+ list of legal port numbers for the ATA controller. Regardless, the caller of this
+ function must probe the port number returned to see if an ATA device is actually
+ present at that location on the ATA controller.
+
+ The GetNextPort() function retrieves the port number on an ATA controller. If on input
+ Port is 0xFFFF, then the port number of the first port on the ATA controller is returned
+ in Port and EFI_SUCCESS is returned.
+
+ If Port is a port number that was returned on a previous call to GetNextPort(), then the
+ port number of the next port on the ATA controller is returned in Port, and EFI_SUCCESS
+ is returned. If Port is not 0xFFFF and Port was not returned on a previous call to
+ GetNextPort(), then EFI_INVALID_PARAMETER is returned.
+
+ If Port is the port number of the last port on the ATA controller, then EFI_NOT_FOUND is
+ returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in, out] Port On input, a pointer to the port number on the ATA controller.
+ On output, a pointer to the next port number on the ATA
+ controller. An input value of 0xFFFF retrieves the first port
+ number on the ATA controller.
+
+ @retval EFI_SUCCESS The next port number on the ATA controller was returned in Port.
+ @retval EFI_NOT_FOUND There are no more ports on this ATA controller.
+ @retval EFI_INVALID_PARAMETER Port is not 0xFFFF and Port was not returned on a previous call
+ to GetNextPort().
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruGetNextPort (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT16 *Port
+ );
+
+/**
+ Used to retrieve the list of legal port multiplier port numbers for ATA devices on a port of an ATA
+ controller. These can either be the list of port multiplier ports where ATA devices are actually
+ present on port or the list of legal port multiplier ports on that port. Regardless, the caller of this
+ function must probe the port number and port multiplier port number returned to see if an ATA
+ device is actually present.
+
+ The GetNextDevice() function retrieves the port multiplier port number of an ATA device
+ present on a port of an ATA controller.
+
+ If PortMultiplierPort points to a port multiplier port number value that was returned on a
+ previous call to GetNextDevice(), then the port multiplier port number of the next ATA device
+ on the port of the ATA controller is returned in PortMultiplierPort, and EFI_SUCCESS is
+ returned.
+
+ If PortMultiplierPort points to 0xFFFF, then the port multiplier port number of the first
+ ATA device on port of the ATA controller is returned in PortMultiplierPort and
+ EFI_SUCCESS is returned.
+
+ If PortMultiplierPort is not 0xFFFF and the value pointed to by PortMultiplierPort
+ was not returned on a previous call to GetNextDevice(), then EFI_INVALID_PARAMETER
+ is returned.
+
+ If PortMultiplierPort is the port multiplier port number of the last ATA device on the port of
+ the ATA controller, then EFI_NOT_FOUND is returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] Port The port number present on the ATA controller.
+ @param[in, out] PortMultiplierPort On input, a pointer to the port multiplier port number of an
+ ATA device present on the ATA controller.
+ If on input a PortMultiplierPort of 0xFFFF is specified,
+ then the port multiplier port number of the first ATA device
+ is returned. On output, a pointer to the port multiplier port
+ number of the next ATA device present on an ATA controller.
+
+ @retval EFI_SUCCESS The port multiplier port number of the next ATA device on the port
+ of the ATA controller was returned in PortMultiplierPort.
+ @retval EFI_NOT_FOUND There are no more ATA devices on this port of the ATA controller.
+ @retval EFI_INVALID_PARAMETER PortMultiplierPort is not 0xFFFF, and PortMultiplierPort was not
+ returned on a previous call to GetNextDevice().
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruGetNextDevice (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN UINT16 Port,
+ IN OUT UINT16 *PortMultiplierPort
+ );
+
+/**
+ Used to allocate and build a device path node for an ATA device on an ATA controller.
+
+ The BuildDevicePath() function allocates and builds a single device node for the ATA
+ device specified by Port and PortMultiplierPort. If the ATA device specified by Port and
+ PortMultiplierPort is not present on the ATA controller, then EFI_NOT_FOUND is returned.
+ If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. If there are not enough
+ resources to allocate the device path node, then EFI_OUT_OF_RESOURCES is returned.
+
+ Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of
+ DevicePath are initialized to describe the ATA device specified by Port and PortMultiplierPort,
+ and EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] Port Port specifies the port number of the ATA device for which a
+ device path node is to be allocated and built.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device for which a
+ device path node is to be allocated and built. If there is no
+ port multiplier, then specify 0.
+ @param[in, out] DevicePath A pointer to a single device path node that describes the ATA
+ device specified by Port and PortMultiplierPort. This function
+ is responsible for allocating the buffer DevicePath with the
+ boot service AllocatePool(). It is the caller's responsibility
+ to free DevicePath when the caller is finished with DevicePath.
+ @retval EFI_SUCCESS The device path node that describes the ATA device specified by
+ Port and PortMultiplierPort was allocated and returned in DevicePath.
+ @retval EFI_NOT_FOUND The ATA device specified by Port and PortMultiplierPort does not
+ exist on the ATA controller.
+ @retval EFI_INVALID_PARAMETER DevicePath is NULL.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruBuildDevicePath (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplierPort,
+ IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ );
+
+/**
+ Used to translate a device path node to a port number and port multiplier port number.
+
+ The GetDevice() function determines the port and port multiplier port number associated with
+ the ATA device described by DevicePath. If DevicePath is a device path node type that the
+ ATA Pass Thru driver supports, then the ATA Pass Thru driver will attempt to translate the contents
+ DevicePath into a port number and port multiplier port number.
+
+ If this translation is successful, then that port number and port multiplier port number are returned
+ in Port and PortMultiplierPort, and EFI_SUCCESS is returned.
+
+ If DevicePath, Port, or PortMultiplierPort are NULL, then EFI_INVALID_PARAMETER is returned.
+
+ If DevicePath is not a device path node type that the ATA Pass Thru driver supports, then
+ EFI_UNSUPPORTED is returned.
+
+ If DevicePath is a device path node type that the ATA Pass Thru driver supports, but there is not
+ a valid translation from DevicePath to a port number and port multiplier port number, then
+ EFI_NOT_FOUND is returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] DevicePath A pointer to the device path node that describes an ATA device on the
+ ATA controller.
+ @param[out] Port On return, points to the port number of an ATA device on the ATA controller.
+ @param[out] PortMultiplierPort On return, points to the port multiplier port number of an ATA device
+ on the ATA controller.
+
+ @retval EFI_SUCCESS DevicePath was successfully translated to a port number and port multiplier
+ port number, and they were returned in Port and PortMultiplierPort.
+ @retval EFI_INVALID_PARAMETER DevicePath is NULL.
+ @retval EFI_INVALID_PARAMETER Port is NULL.
+ @retval EFI_INVALID_PARAMETER PortMultiplierPort is NULL.
+ @retval EFI_UNSUPPORTED This driver does not support the device path node type in DevicePath.
+ @retval EFI_NOT_FOUND A valid translation from DevicePath to a port number and port multiplier
+ port number does not exist.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruGetDevice (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ OUT UINT16 *Port,
+ OUT UINT16 *PortMultiplierPort
+ );
+
+/**
+ Resets a specific port on the ATA controller. This operation also resets all the ATA devices
+ connected to the port.
+
+ The ResetChannel() function resets an a specific port on an ATA controller. This operation
+ resets all the ATA devices connected to that port. If this ATA controller does not support
+ a reset port operation, then EFI_UNSUPPORTED is returned.
+
+ If a device error occurs while executing that port reset operation, then EFI_DEVICE_ERROR is
+ returned.
+
+ If a timeout occurs during the execution of the port reset operation, then EFI_TIMEOUT is returned.
+
+ If the port reset operation is completed, then EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] Port The port number on the ATA controller.
+
+ @retval EFI_SUCCESS The ATA controller port was reset.
+ @retval EFI_UNSUPPORTED The ATA controller does not support a port reset operation.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA port.
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA port.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruResetPort (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN UINT16 Port
+ );
+
+/**
+ Resets an ATA device that is connected to an ATA controller.
+
+ The ResetDevice() function resets the ATA device specified by Port and PortMultiplierPort.
+ If this ATA controller does not support a device reset operation, then EFI_UNSUPPORTED is
+ returned.
+
+ If Port or PortMultiplierPort are not in a valid range for this ATA controller, then
+ EFI_INVALID_PARAMETER is returned.
+
+ If a device error occurs while executing that device reset operation, then EFI_DEVICE_ERROR
+ is returned.
+
+ If a timeout occurs during the execution of the device reset operation, then EFI_TIMEOUT is
+ returned.
+
+ If the device reset operation is completed, then EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] Port Port represents the port number of the ATA device to be reset.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device to reset.
+ If there is no port multiplier, then specify 0.
+ @retval EFI_SUCCESS The ATA device specified by Port and PortMultiplierPort was reset.
+ @retval EFI_UNSUPPORTED The ATA controller does not support a device reset operation.
+ @retval EFI_INVALID_PARAMETER Port or PortMultiplierPort are invalid.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA device
+ specified by Port and PortMultiplierPort.
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA device
+ specified by Port and PortMultiplierPort.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruResetDevice (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplierPort
+ );
+
+/**
+ Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel. This function
+ supports both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the
+ nonblocking I/O functionality is optional.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target The Target is an array of size TARGET_MAX_BYTES and it represents
+ the id of the SCSI device to send the SCSI Request Packet. Each
+ transport driver may choose to utilize a subset of this size to suit the needs
+ of transport target representation. For example, a Fibre Channel driver
+ may use only 8 bytes (WWN) to represent an FC target.
+ @param Lun The LUN of the SCSI device to send the SCSI Request Packet.
+ @param Packet A pointer to the SCSI Request Packet to send to the SCSI device
+ specified by Target and Lun.
+ @param Event If nonblocking I/O is not supported then Event is ignored, and blocking
+ I/O is performed. If Event is NULL, then blocking I/O is performed. If
+ Event is not NULL and non blocking I/O is supported, then
+ nonblocking I/O is performed, and Event will be signaled when the
+ SCSI Request Packet completes.
+
+ @retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For bi-directional
+ commands, InTransferLength bytes were transferred from
+ InDataBuffer. For write and bi-directional commands,
+ OutTransferLength bytes were transferred by
+ OutDataBuffer.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was not executed. The number of bytes that
+ could be transferred is returned in InTransferLength. For write
+ and bi-directional commands, OutTransferLength bytes were
+ transferred by OutDataBuffer.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
+ SCSI Request Packets already queued. The caller may retry again later.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SCSI Request
+ Packet.
+ @retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket are invalid.
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported
+ by the host adapter. This includes the case of Bi-directional SCSI
+ commands not supported by the implementation. The SCSI Request
+ Packet was not sent, so no additional status information is available.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruPassThru (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun,
+ IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
+ IN EFI_EVENT Event OPTIONAL
+ );
+
+/**
+ Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on a SCSI channel. These
+ can either be the list SCSI devices that are actually present on the SCSI channel, or the list of legal
+ Target Ids and LUNs for the SCSI channel. Regardless, the caller of this function must probe the
+ Target ID and LUN returned to see if a SCSI device is actually present at that location on the SCSI
+ channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target On input, a pointer to the Target ID (an array of size
+ TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
+ On output, a pointer to the Target ID (an array of
+ TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
+ channel. An input value of 0xF(all bytes in the array are 0xF) in the
+ Target array retrieves the Target ID of the first SCSI device present on a
+ SCSI channel.
+ @param Lun On input, a pointer to the LUN of a SCSI device present on the SCSI
+ channel. On output, a pointer to the LUN of the next SCSI device present
+ on a SCSI channel.
+
+ @retval EFI_SUCCESS The Target ID and LUN of the next SCSI device on the SCSI
+ channel was returned in Target and Lun.
+ @retval EFI_INVALID_PARAMETER Target array is not all 0xF, and Target and Lun were
+ not returned on a previous call to GetNextTargetLun().
+ @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruGetNextTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 **Target,
+ IN OUT UINT64 *Lun
+ );
+
+/**
+ Used to allocate and build a device path node for a SCSI device on a SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target The Target is an array of size TARGET_MAX_BYTES and it specifies the
+ Target ID of the SCSI device for which a device path node is to be
+ allocated and built. Transport drivers may chose to utilize a subset of
+ this size to suit the representation of targets. For example, a Fibre
+ Channel driver may use only 8 bytes (WWN) in the array to represent a
+ FC target.
+ @param Lun The LUN of the SCSI device for which a device path node is to be
+ allocated and built.
+ @param DevicePath A pointer to a single device path node that describes the SCSI device
+ specified by Target and Lun. This function is responsible for
+ allocating the buffer DevicePath with the boot service
+ AllocatePool(). It is the caller's responsibility to free
+ DevicePath when the caller is finished with DevicePath.
+
+ @retval EFI_SUCCESS The device path node that describes the SCSI device specified by
+ Target and Lun was allocated and returned in
+ DevicePath.
+ @retval EFI_INVALID_PARAMETER DevicePath is NULL.
+ @retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does not exist
+ on the SCSI channel.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruBuildDevicePath (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun,
+ IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ );
+
+/**
+ Used to translate a device path node to a Target ID and LUN.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param DevicePath A pointer to a single device path node that describes the SCSI device
+ on the SCSI channel.
+ @param Target A pointer to the Target Array which represents the ID of a SCSI device
+ on the SCSI channel.
+ @param Lun A pointer to the LUN of a SCSI device on the SCSI channel.
+
+ @retval EFI_SUCCESS DevicePath was successfully translated to a Target ID and
+ LUN, and they were returned in Target and Lun.
+ @retval EFI_INVALID_PARAMETER DevicePath or Target or Lun is NULL.
+ @retval EFI_NOT_FOUND A valid translation from DevicePath to a Target ID and LUN
+ does not exist.
+ @retval EFI_UNSUPPORTED This driver does not support the device path node type in
+ DevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruGetTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ OUT UINT8 **Target,
+ OUT UINT64 *Lun
+ );
+
+/**
+ Resets a SCSI channel. This operation resets all the SCSI devices connected to the SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The SCSI channel was reset.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI channel.
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI channel.
+ @retval EFI_UNSUPPORTED The SCSI channel does not support a channel reset operation.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruResetChannel (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This
+ );
+
+/**
+ Resets a SCSI logical unit that is connected to a SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target The Target is an array of size TARGET_MAX_BYTE and it represents the
+ target port ID of the SCSI device containing the SCSI logical unit to
+ reset. Transport drivers may chose to utilize a subset of this array to suit
+ the representation of their targets.
+ @param Lun The LUN of the SCSI device to reset.
+
+ @retval EFI_SUCCESS The SCSI device specified by Target and Lun was reset.
+ @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI device
+ specified by Target and Lun.
+ @retval EFI_UNSUPPORTED The SCSI channel does not support a target reset operation.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI device
+ specified by Target and Lun.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruResetTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun
+ );
+
+/**
+ Used to retrieve the list of legal Target IDs for SCSI devices on a SCSI channel. These can either
+ be the list SCSI devices that are actually present on the SCSI channel, or the list of legal Target IDs
+ for the SCSI channel. Regardless, the caller of this function must probe the Target ID returned to
+ see if a SCSI device is actually present at that location on the SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target (TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
+ On output, a pointer to the Target ID (an array of
+ TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
+ channel. An input value of 0xF(all bytes in the array are 0xF) in the
+ Target array retrieves the Target ID of the first SCSI device present on a
+ SCSI channel.
+
+ @retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI
+ channel was returned in Target.
+ @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
+ @retval EFI_TIMEOUT Target array is not all 0xF, and Target was not
+ returned on a previous call to GetNextTarget().
+ @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruGetNextTarget (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 **Target
+ );
+
+/**
+ Initialize ATA host controller at IDE mode.
+
+ The function is designed to initialize ATA host controller.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+
+**/
+EFI_STATUS
+EFIAPI
+IdeModeInitialization (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
+ );
+
+/**
+ Initialize ATA host controller at AHCI mode.
+
+ The function is designed to initialize ATA host controller.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciModeInitialization (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
+ );
+
+/**
+ Start a non data transfer on specific port.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param[in] Port The number of port.
+ @param[in] PortMultiplier The timeout value of stop.
+ @param[in] AtapiCommand The atapi command will be used for the
+ transfer.
+ @param[in] AtapiCommandLength The length of the atapi command.
+ @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data.
+ @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data.
+ @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_DEVICE_ERROR The non data transfer abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for transfer.
+ @retval EFI_SUCCESS The non data transfer executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciNonDataTransfer (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
+ IN UINT8 AtapiCommandLength,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ );
+
+/**
+ Start a DMA data transfer on specific port
+
+ @param[in] Instance The ATA_ATAPI_PASS_THRU_INSTANCE protocol instance.
+ @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param[in] Port The number of port.
+ @param[in] PortMultiplier The timeout value of stop.
+ @param[in] AtapiCommand The atapi command will be used for the
+ transfer.
+ @param[in] AtapiCommandLength The length of the atapi command.
+ @param[in] Read The transfer direction.
+ @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data.
+ @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data.
+ @param[in, out] MemoryAddr The pointer to the data buffer.
+ @param[in] DataCount The data count to be transferred.
+ @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_DEVICE_ERROR The DMA data transfer abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for transfer.
+ @retval EFI_SUCCESS The DMA data transfer executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciDmaTransfer (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
+ IN UINT8 AtapiCommandLength,
+ IN BOOLEAN Read,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN OUT VOID *MemoryAddr,
+ IN UINT32 DataCount,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ );
+
+/**
+ Start a PIO data transfer on specific port.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param[in] Port The number of port.
+ @param[in] PortMultiplier The timeout value of stop.
+ @param[in] AtapiCommand The atapi command will be used for the
+ transfer.
+ @param[in] AtapiCommandLength The length of the atapi command.
+ @param[in] Read The transfer direction.
+ @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data.
+ @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data.
+ @param[in, out] MemoryAddr The pointer to the data buffer.
+ @param[in] DataCount The data count to be transferred.
+ @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_DEVICE_ERROR The PIO data transfer abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for transfer.
+ @retval EFI_SUCCESS The PIO data transfer executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciPioTransfer (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
+ IN UINT8 AtapiCommandLength,
+ IN BOOLEAN Read,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN OUT VOID *MemoryAddr,
+ IN UINT32 DataCount,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ );
+
+/**
+ Send ATA command into device with NON_DATA protocol
+
+ @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE
+ data structure.
+ @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data
+ structure.
+ @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+ @param[in] Timeout The time to complete the command, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_SUCCESS Reading succeed
+ @retval EFI_ABORTED Command failed
+ @retval EFI_DEVICE_ERROR Device status error.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaNonDataCommandIn (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ );
+
+/**
+ Perform an ATA Udma operation (Read, ReadExt, Write, WriteExt).
+
+ @param[in] Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data
+ structure.
+ @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param[in] Read Flag used to determine the data transfer
+ direction. Read equals 1, means data transferred
+ from device to host;Read equals 0, means data
+ transferred from host to device.
+ @param[in] DataBuffer A pointer to the source buffer for the data.
+ @param[in] DataLength The length of the data.
+ @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure.
+ @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+ @param[in] Timeout The time to complete the command, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_SUCCESS the operation is successful.
+ @retval EFI_OUT_OF_RESOURCES Build PRD table failed
+ @retval EFI_UNSUPPORTED Unknown channel or operations command
+ @retval EFI_DEVICE_ERROR Ata command execute failed
+
+**/
+EFI_STATUS
+EFIAPI
+AtaUdmaInOut (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN BOOLEAN Read,
+ IN VOID *DataBuffer,
+ IN UINT64 DataLength,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ );
+
+/**
+ This function is used to send out ATA commands conforms to the PIO Data In Protocol.
+
+ @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data
+ structure.
+ @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param[in, out] Buffer A pointer to the source buffer for the data.
+ @param[in] ByteCount The length of the data.
+ @param[in] Read Flag used to determine the data transfer direction.
+ Read equals 1, means data transferred from device
+ to host;Read equals 0, means data transferred
+ from host to device.
+ @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure.
+ @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+ @param[in] Timeout The time to complete the command, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_SUCCESS send out the ATA command and device send required data successfully.
+ @retval EFI_DEVICE_ERROR command sent failed.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPioDataInOut (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN OUT VOID *Buffer,
+ IN UINT64 ByteCount,
+ IN BOOLEAN Read,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ );
+
+#endif
+
diff --git a/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf new file mode 100644 index 0000000000..82d5f7a46c --- /dev/null +++ b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf @@ -0,0 +1,78 @@ +## @file
+# AtaAtapiPassThru driver to provide native IDE/AHCI mode support.
+#
+# This driver installs AtaPassThru and ExtScsiPassThru protocol in each ide/sata controller
+# to access to all attached Ata/Atapi devices.
+#
+# Copyright (c) 2010 - 2014, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = AtaAtapiPassThruDxe
+ MODULE_UNI_FILE = AtaAtapiPassThruDxe.uni
+ FILE_GUID = 5E523CB4-D397-4986-87BD-A6DD8B22F455
+ MODULE_TYPE = UEFI_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = InitializeAtaAtapiPassThru
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+#
+# DRIVER_BINDING = gAtaAtapiPassThruDriverBinding
+# COMPONENT_NAME = gAtaAtapiPassThruComponentName
+# COMPONENT_NAME2 = gAtaAtapiPassThruComponentName2
+#
+#
+
+[Sources]
+ AtaAtapiPassThru.c
+ AtaAtapiPassThru.h
+ AhciMode.c
+ AhciMode.h
+ IdeMode.c
+ IdeMode.h
+ ComponentName.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[LibraryClasses]
+ DevicePathLib
+ UefiBootServicesTableLib
+ MemoryAllocationLib
+ BaseMemoryLib
+ UefiLib
+ BaseLib
+ UefiDriverEntryPoint
+ DebugLib
+ TimerLib
+ ReportStatusCodeLib
+ PcdLib
+
+[Protocols]
+ gEfiAtaPassThruProtocolGuid ## BY_START
+ gEfiExtScsiPassThruProtocolGuid ## BY_START
+ gEfiIdeControllerInitProtocolGuid ## TO_START
+ gEfiDevicePathProtocolGuid ## TO_START
+ gEfiPciIoProtocolGuid ## TO_START
+
+[Pcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable ## SOMETIMES_CONSUMES
+
+# [Event]
+# EVENT_TYPE_PERIODIC_TIMER ## SOMETIMES_CONSUMES
+
+[UserExtensions.TianoCore."ExtraFiles"]
+ AtaAtapiPassThruDxeExtra.uni
diff --git a/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxe.uni b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxe.uni Binary files differnew file mode 100644 index 0000000000..0285409ec5 --- /dev/null +++ b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxe.uni diff --git a/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxeExtra.uni b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxeExtra.uni Binary files differnew file mode 100644 index 0000000000..d89350dfe3 --- /dev/null +++ b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxeExtra.uni diff --git a/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/ComponentName.c b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/ComponentName.c new file mode 100644 index 0000000000..c3f7738d45 --- /dev/null +++ b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/ComponentName.c @@ -0,0 +1,251 @@ +/** @file
+ UEFI Component Name(2) protocol implementation for AtaAtapiPassThru driver.
+
+ Copyright (c) 2010 - 2011, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "AtaAtapiPassThru.h"
+
+//
+// Driver name table
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mAtaAtapiPassThruDriverNameTable[] = {
+ { "eng;en", L"AtaAtapiPassThru Driver" },
+ { NULL , NULL }
+};
+
+//
+// Controller name table
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mAtaAtapiPassThruIdeControllerNameTable[] = {
+ { "eng;en", L"IDE Controller" },
+ { NULL , NULL }
+};
+
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mAtaAtapiPassThruAhciControllerNameTable[] = {
+ { "eng;en", L"AHCI Controller" },
+ { NULL , NULL }
+};
+
+//
+// EFI Component Name Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gAtaAtapiPassThruComponentName = {
+ AtaAtapiPassThruComponentNameGetDriverName,
+ AtaAtapiPassThruComponentNameGetControllerName,
+ "eng"
+};
+
+//
+// EFI Component Name 2 Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gAtaAtapiPassThruComponentName2 = {
+ (EFI_COMPONENT_NAME2_GET_DRIVER_NAME) AtaAtapiPassThruComponentNameGetDriverName,
+ (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) AtaAtapiPassThruComponentNameGetControllerName,
+ "en"
+};
+
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+
+ @param DriverName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAtapiPassThruComponentNameGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ )
+{
+ return LookupUnicodeString2 (
+ Language,
+ This->SupportedLanguages,
+ mAtaAtapiPassThruDriverNameTable,
+ DriverName,
+ (BOOLEAN)(This == &gAtaAtapiPassThruComponentName)
+ );
+}
+
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ @param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ @param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAtapiPassThruComponentNameGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle OPTIONAL,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ )
+{
+ EFI_STATUS Status;
+ EFI_UNICODE_STRING_TABLE *ControllerNameTable;
+ VOID *Interface;
+ ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
+
+ if (Language == NULL || ControllerName == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // This is a device driver, so ChildHandle must be NULL.
+ //
+ if (ChildHandle != NULL) {
+ return EFI_UNSUPPORTED;
+ }
+
+ //
+ // Make sure this driver is currently managing Controller Handle
+ //
+ Status = EfiTestManagedDevice (
+ ControllerHandle,
+ gAtaAtapiPassThruDriverBinding.DriverBindingHandle,
+ &gEfiIdeControllerInitProtocolGuid
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // AtaPassThru and ExtScsiPassThru should also be installed at the controller handle.
+ //
+ Status = gBS->OpenProtocol (
+ ControllerHandle,
+ &gEfiAtaPassThruProtocolGuid,
+ &Interface,
+ gAtaAtapiPassThruDriverBinding.DriverBindingHandle,
+ ControllerHandle,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_UNSUPPORTED;
+ }
+
+ Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (Interface);
+
+ if (Instance->Mode == EfiAtaIdeMode) {
+ ControllerNameTable = mAtaAtapiPassThruIdeControllerNameTable;
+ } else if (Instance->Mode == EfiAtaAhciMode) {
+ ControllerNameTable = mAtaAtapiPassThruAhciControllerNameTable;
+ } else {
+ return EFI_UNSUPPORTED;
+ }
+
+ return LookupUnicodeString2 (
+ Language,
+ This->SupportedLanguages,
+ ControllerNameTable,
+ ControllerName,
+ (BOOLEAN)(This == &gAtaAtapiPassThruComponentName)
+ );
+}
diff --git a/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c new file mode 100644 index 0000000000..420ad273dc --- /dev/null +++ b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c @@ -0,0 +1,2890 @@ +/** @file
+ Header file for AHCI mode of ATA host controller.
+
+ Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "AtaAtapiPassThru.h"
+
+/**
+ read a one-byte data from a IDE port.
+
+ @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure
+ @param Port The IDE Port number
+
+ @return the one-byte data read from IDE port
+**/
+UINT8
+EFIAPI
+IdeReadPortB (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT16 Port
+ )
+{
+ UINT8 Data;
+
+ ASSERT (PciIo != NULL);
+
+ Data = 0;
+ //
+ // perform 1-byte data read from register
+ //
+ PciIo->Io.Read (
+ PciIo,
+ EfiPciIoWidthUint8,
+ EFI_PCI_IO_PASS_THROUGH_BAR,
+ (UINT64) Port,
+ 1,
+ &Data
+ );
+ return Data;
+}
+
+/**
+ write a 1-byte data to a specific IDE port.
+
+ @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure
+ @param Port The IDE port to be writen
+ @param Data The data to write to the port
+**/
+VOID
+EFIAPI
+IdeWritePortB (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT16 Port,
+ IN UINT8 Data
+ )
+{
+ ASSERT (PciIo != NULL);
+
+ //
+ // perform 1-byte data write to register
+ //
+ PciIo->Io.Write (
+ PciIo,
+ EfiPciIoWidthUint8,
+ EFI_PCI_IO_PASS_THROUGH_BAR,
+ (UINT64) Port,
+ 1,
+ &Data
+ );
+}
+
+/**
+ write a 1-word data to a specific IDE port.
+
+ @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure
+ @param Port The IDE port to be writen
+ @param Data The data to write to the port
+**/
+VOID
+EFIAPI
+IdeWritePortW (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT16 Port,
+ IN UINT16 Data
+ )
+{
+ ASSERT (PciIo != NULL);
+
+ //
+ // perform 1-word data write to register
+ //
+ PciIo->Io.Write (
+ PciIo,
+ EfiPciIoWidthUint16,
+ EFI_PCI_IO_PASS_THROUGH_BAR,
+ (UINT64) Port,
+ 1,
+ &Data
+ );
+}
+
+/**
+ write a 2-word data to a specific IDE port.
+
+ @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure
+ @param Port The IDE port to be writen
+ @param Data The data to write to the port
+**/
+VOID
+EFIAPI
+IdeWritePortDW (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT16 Port,
+ IN UINT32 Data
+ )
+{
+ ASSERT (PciIo != NULL);
+
+ //
+ // perform 2-word data write to register
+ //
+ PciIo->Io.Write (
+ PciIo,
+ EfiPciIoWidthUint32,
+ EFI_PCI_IO_PASS_THROUGH_BAR,
+ (UINT64) Port,
+ 1,
+ &Data
+ );
+}
+
+/**
+ Write multiple words of data to the IDE data port.
+ Call the IO abstraction once to do the complete read,
+ not one word at a time
+
+ @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure
+ @param Port IO port to read
+ @param Count No. of UINT16's to read
+ @param Buffer Pointer to the data buffer for read
+
+**/
+VOID
+EFIAPI
+IdeWritePortWMultiple (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT16 Port,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ ASSERT (PciIo != NULL);
+ ASSERT (Buffer != NULL);
+
+ //
+ // perform UINT16 data write to the FIFO
+ //
+ PciIo->Io.Write (
+ PciIo,
+ EfiPciIoWidthFifoUint16,
+ EFI_PCI_IO_PASS_THROUGH_BAR,
+ (UINT64) Port,
+ Count,
+ (UINT16 *) Buffer
+ );
+
+}
+
+/**
+ Reads multiple words of data from the IDE data port.
+ Call the IO abstraction once to do the complete read,
+ not one word at a time
+
+ @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure
+ @param Port IO port to read
+ @param Count Number of UINT16's to read
+ @param Buffer Pointer to the data buffer for read
+
+**/
+VOID
+EFIAPI
+IdeReadPortWMultiple (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT16 Port,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ ASSERT (PciIo != NULL);
+ ASSERT (Buffer != NULL);
+
+ //
+ // Perform UINT16 data read from FIFO
+ //
+ PciIo->Io.Read (
+ PciIo,
+ EfiPciIoWidthFifoUint16,
+ EFI_PCI_IO_PASS_THROUGH_BAR,
+ (UINT64) Port,
+ Count,
+ (UINT16 *) Buffer
+ );
+
+}
+
+/**
+ This function is used to analyze the Status Register and print out
+ some debug information and if there is ERR bit set in the Status
+ Register, the Error Register's value is also be parsed and print out.
+
+ @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure.
+ @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+
+**/
+VOID
+EFIAPI
+DumpAllIdeRegisters (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
+ )
+{
+ EFI_ATA_STATUS_BLOCK StatusBlock;
+
+ ASSERT (PciIo != NULL);
+ ASSERT (IdeRegisters != NULL);
+
+ ZeroMem (&StatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
+
+ StatusBlock.AtaStatus = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus);
+ StatusBlock.AtaError = IdeReadPortB (PciIo, IdeRegisters->ErrOrFeature);
+ StatusBlock.AtaSectorCount = IdeReadPortB (PciIo, IdeRegisters->SectorCount);
+ StatusBlock.AtaSectorCountExp = IdeReadPortB (PciIo, IdeRegisters->SectorCount);
+ StatusBlock.AtaSectorNumber = IdeReadPortB (PciIo, IdeRegisters->SectorNumber);
+ StatusBlock.AtaSectorNumberExp = IdeReadPortB (PciIo, IdeRegisters->SectorNumber);
+ StatusBlock.AtaCylinderLow = IdeReadPortB (PciIo, IdeRegisters->CylinderLsb);
+ StatusBlock.AtaCylinderLowExp = IdeReadPortB (PciIo, IdeRegisters->CylinderLsb);
+ StatusBlock.AtaCylinderHigh = IdeReadPortB (PciIo, IdeRegisters->CylinderMsb);
+ StatusBlock.AtaCylinderHighExp = IdeReadPortB (PciIo, IdeRegisters->CylinderMsb);
+ StatusBlock.AtaDeviceHead = IdeReadPortB (PciIo, IdeRegisters->Head);
+
+ if (AtaStatusBlock != NULL) {
+ //
+ // Dump the content of all ATA registers.
+ //
+ CopyMem (AtaStatusBlock, &StatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
+ }
+
+ DEBUG_CODE_BEGIN ();
+ if ((StatusBlock.AtaStatus & ATA_STSREG_DWF) != 0) {
+ DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Write Fault\n", StatusBlock.AtaStatus));
+ }
+
+ if ((StatusBlock.AtaStatus & ATA_STSREG_CORR) != 0) {
+ DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Corrected Data\n", StatusBlock.AtaStatus));
+ }
+
+ if ((StatusBlock.AtaStatus & ATA_STSREG_ERR) != 0) {
+ if ((StatusBlock.AtaError & ATA_ERRREG_BBK) != 0) {
+ DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Bad Block Detected\n", StatusBlock.AtaError));
+ }
+
+ if ((StatusBlock.AtaError & ATA_ERRREG_UNC) != 0) {
+ DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Uncorrectable Data\n", StatusBlock.AtaError));
+ }
+
+ if ((StatusBlock.AtaError & ATA_ERRREG_MC) != 0) {
+ DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Media Change\n", StatusBlock.AtaError));
+ }
+
+ if ((StatusBlock.AtaError & ATA_ERRREG_ABRT) != 0) {
+ DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Abort\n", StatusBlock.AtaError));
+ }
+
+ if ((StatusBlock.AtaError & ATA_ERRREG_TK0NF) != 0) {
+ DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Track 0 Not Found\n", StatusBlock.AtaError));
+ }
+
+ if ((StatusBlock.AtaError & ATA_ERRREG_AMNF) != 0) {
+ DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Address Mark Not Found\n", StatusBlock.AtaError));
+ }
+ }
+ DEBUG_CODE_END ();
+}
+
+/**
+ This function is used to analyze the Status Register at the condition that BSY is zero.
+ if there is ERR bit set in the Status Register, then return error.
+
+ @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure.
+ @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+
+ @retval EFI_SUCCESS No err information in the Status Register.
+ @retval EFI_DEVICE_ERROR Any err information in the Status Register.
+
+**/
+EFI_STATUS
+EFIAPI
+CheckStatusRegister (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters
+ )
+{
+ UINT8 StatusRegister;
+
+ ASSERT (PciIo != NULL);
+ ASSERT (IdeRegisters != NULL);
+
+ StatusRegister = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus);
+
+ if ((StatusRegister & ATA_STSREG_BSY) == 0) {
+ if ((StatusRegister & (ATA_STSREG_ERR | ATA_STSREG_DWF | ATA_STSREG_CORR)) == 0) {
+ return EFI_SUCCESS;
+ } else {
+ return EFI_DEVICE_ERROR;
+ }
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ This function is used to poll for the DRQ bit clear in the Status
+ Register. DRQ is cleared when the device is finished transferring data.
+ So this function is called after data transfer is finished.
+
+ @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure.
+ @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param Timeout The time to complete the command, uses 100ns as a unit.
+
+ @retval EFI_SUCCESS DRQ bit clear within the time out.
+
+ @retval EFI_TIMEOUT DRQ bit not clear within the time out.
+
+ @note
+ Read Status Register will clear interrupt status.
+
+**/
+EFI_STATUS
+EFIAPI
+DRQClear (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN UINT64 Timeout
+ )
+{
+ UINT64 Delay;
+ UINT8 StatusRegister;
+ BOOLEAN InfiniteWait;
+
+ ASSERT (PciIo != NULL);
+ ASSERT (IdeRegisters != NULL);
+
+ if (Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+
+ Delay = DivU64x32(Timeout, 1000) + 1;
+ do {
+ StatusRegister = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus);
+
+ //
+ // Wait for BSY == 0, then judge if DRQ is clear
+ //
+ if ((StatusRegister & ATA_STSREG_BSY) == 0) {
+ if ((StatusRegister & ATA_STSREG_DRQ) == ATA_STSREG_DRQ) {
+ return EFI_DEVICE_ERROR;
+ } else {
+ return EFI_SUCCESS;
+ }
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay (100);
+
+ Delay--;
+
+ } while (InfiniteWait || (Delay > 0));
+
+ return EFI_TIMEOUT;
+}
+/**
+ This function is used to poll for the DRQ bit clear in the Alternate
+ Status Register. DRQ is cleared when the device is finished
+ transferring data. So this function is called after data transfer
+ is finished.
+
+ @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure.
+ @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param Timeout The time to complete the command, uses 100ns as a unit.
+
+ @retval EFI_SUCCESS DRQ bit clear within the time out.
+
+ @retval EFI_TIMEOUT DRQ bit not clear within the time out.
+ @note Read Alternate Status Register will not clear interrupt status.
+
+**/
+EFI_STATUS
+EFIAPI
+DRQClear2 (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN UINT64 Timeout
+ )
+{
+ UINT64 Delay;
+ UINT8 AltRegister;
+ BOOLEAN InfiniteWait;
+
+ ASSERT (PciIo != NULL);
+ ASSERT (IdeRegisters != NULL);
+
+ if (Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+
+ Delay = DivU64x32(Timeout, 1000) + 1;
+ do {
+ AltRegister = IdeReadPortB (PciIo, IdeRegisters->AltOrDev);
+
+ //
+ // Wait for BSY == 0, then judge if DRQ is clear
+ //
+ if ((AltRegister & ATA_STSREG_BSY) == 0) {
+ if ((AltRegister & ATA_STSREG_DRQ) == ATA_STSREG_DRQ) {
+ return EFI_DEVICE_ERROR;
+ } else {
+ return EFI_SUCCESS;
+ }
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay (100);
+
+ Delay--;
+
+ } while (InfiniteWait || (Delay > 0));
+
+ return EFI_TIMEOUT;
+}
+
+/**
+ This function is used to poll for the DRQ bit set in the
+ Status Register.
+ DRQ is set when the device is ready to transfer data. So this function
+ is called after the command is sent to the device and before required
+ data is transferred.
+
+ @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure.
+ @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param Timeout The time to complete the command, uses 100ns as a unit.
+
+ @retval EFI_SUCCESS DRQ bit set within the time out.
+ @retval EFI_TIMEOUT DRQ bit not set within the time out.
+ @retval EFI_ABORTED DRQ bit not set caused by the command abort.
+
+ @note Read Status Register will clear interrupt status.
+
+**/
+EFI_STATUS
+EFIAPI
+DRQReady (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN UINT64 Timeout
+ )
+{
+ UINT64 Delay;
+ UINT8 StatusRegister;
+ UINT8 ErrorRegister;
+ BOOLEAN InfiniteWait;
+
+ ASSERT (PciIo != NULL);
+ ASSERT (IdeRegisters != NULL);
+
+ if (Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+
+ Delay = DivU64x32(Timeout, 1000) + 1;
+ do {
+ //
+ // Read Status Register will clear interrupt
+ //
+ StatusRegister = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus);
+
+ //
+ // Wait for BSY == 0, then judge if DRQ is clear or ERR is set
+ //
+ if ((StatusRegister & ATA_STSREG_BSY) == 0) {
+ if ((StatusRegister & ATA_STSREG_ERR) == ATA_STSREG_ERR) {
+ ErrorRegister = IdeReadPortB (PciIo, IdeRegisters->ErrOrFeature);
+
+ if ((ErrorRegister & ATA_ERRREG_ABRT) == ATA_ERRREG_ABRT) {
+ return EFI_ABORTED;
+ }
+ return EFI_DEVICE_ERROR;
+ }
+
+ if ((StatusRegister & ATA_STSREG_DRQ) == ATA_STSREG_DRQ) {
+ return EFI_SUCCESS;
+ } else {
+ return EFI_NOT_READY;
+ }
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay (100);
+
+ Delay--;
+ } while (InfiniteWait || (Delay > 0));
+
+ return EFI_TIMEOUT;
+}
+/**
+ This function is used to poll for the DRQ bit set in the Alternate Status Register.
+ DRQ is set when the device is ready to transfer data. So this function is called after
+ the command is sent to the device and before required data is transferred.
+
+ @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure.
+ @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param Timeout The time to complete the command, uses 100ns as a unit.
+
+ @retval EFI_SUCCESS DRQ bit set within the time out.
+ @retval EFI_TIMEOUT DRQ bit not set within the time out.
+ @retval EFI_ABORTED DRQ bit not set caused by the command abort.
+ @note Read Alternate Status Register will not clear interrupt status.
+
+**/
+EFI_STATUS
+EFIAPI
+DRQReady2 (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN UINT64 Timeout
+ )
+{
+ UINT64 Delay;
+ UINT8 AltRegister;
+ UINT8 ErrorRegister;
+ BOOLEAN InfiniteWait;
+
+ ASSERT (PciIo != NULL);
+ ASSERT (IdeRegisters != NULL);
+
+ if (Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+
+ Delay = DivU64x32(Timeout, 1000) + 1;
+
+ do {
+ //
+ // Read Alternate Status Register will not clear interrupt status
+ //
+ AltRegister = IdeReadPortB (PciIo, IdeRegisters->AltOrDev);
+ //
+ // Wait for BSY == 0, then judge if DRQ is clear or ERR is set
+ //
+ if ((AltRegister & ATA_STSREG_BSY) == 0) {
+ if ((AltRegister & ATA_STSREG_ERR) == ATA_STSREG_ERR) {
+ ErrorRegister = IdeReadPortB (PciIo, IdeRegisters->ErrOrFeature);
+
+ if ((ErrorRegister & ATA_ERRREG_ABRT) == ATA_ERRREG_ABRT) {
+ return EFI_ABORTED;
+ }
+ return EFI_DEVICE_ERROR;
+ }
+
+ if ((AltRegister & ATA_STSREG_DRQ) == ATA_STSREG_DRQ) {
+ return EFI_SUCCESS;
+ } else {
+ return EFI_NOT_READY;
+ }
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay (100);
+
+ Delay--;
+ } while (InfiniteWait || (Delay > 0));
+
+ return EFI_TIMEOUT;
+}
+
+/**
+ This function is used to poll for the DRDY bit set in the Status Register. DRDY
+ bit is set when the device is ready to accept command. Most ATA commands must be
+ sent after DRDY set except the ATAPI Packet Command.
+
+ @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure.
+ @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param Timeout The time to complete the command, uses 100ns as a unit.
+
+ @retval EFI_SUCCESS DRDY bit set within the time out.
+ @retval EFI_TIMEOUT DRDY bit not set within the time out.
+
+ @note Read Status Register will clear interrupt status.
+**/
+EFI_STATUS
+EFIAPI
+DRDYReady (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN UINT64 Timeout
+ )
+{
+ UINT64 Delay;
+ UINT8 StatusRegister;
+ UINT8 ErrorRegister;
+ BOOLEAN InfiniteWait;
+
+ ASSERT (PciIo != NULL);
+ ASSERT (IdeRegisters != NULL);
+
+ if (Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+
+ Delay = DivU64x32(Timeout, 1000) + 1;
+ do {
+ StatusRegister = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus);
+ //
+ // Wait for BSY == 0, then judge if DRDY is set or ERR is set
+ //
+ if ((StatusRegister & ATA_STSREG_BSY) == 0) {
+ if ((StatusRegister & ATA_STSREG_ERR) == ATA_STSREG_ERR) {
+ ErrorRegister = IdeReadPortB (PciIo, IdeRegisters->ErrOrFeature);
+
+ if ((ErrorRegister & ATA_ERRREG_ABRT) == ATA_ERRREG_ABRT) {
+ return EFI_ABORTED;
+ }
+ return EFI_DEVICE_ERROR;
+ }
+
+ if ((StatusRegister & ATA_STSREG_DRDY) == ATA_STSREG_DRDY) {
+ return EFI_SUCCESS;
+ } else {
+ return EFI_DEVICE_ERROR;
+ }
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay (100);
+
+ Delay--;
+ } while (InfiniteWait || (Delay > 0));
+
+ return EFI_TIMEOUT;
+}
+
+/**
+ This function is used to poll for the DRDY bit set in the Alternate Status Register.
+ DRDY bit is set when the device is ready to accept command. Most ATA commands must
+ be sent after DRDY set except the ATAPI Packet Command.
+
+ @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure.
+ @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param Timeout The time to complete the command, uses 100ns as a unit.
+
+ @retval EFI_SUCCESS DRDY bit set within the time out.
+ @retval EFI_TIMEOUT DRDY bit not set within the time out.
+
+ @note Read Alternate Status Register will clear interrupt status.
+
+**/
+EFI_STATUS
+EFIAPI
+DRDYReady2 (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN UINT64 Timeout
+ )
+{
+ UINT64 Delay;
+ UINT8 AltRegister;
+ UINT8 ErrorRegister;
+ BOOLEAN InfiniteWait;
+
+ ASSERT (PciIo != NULL);
+ ASSERT (IdeRegisters != NULL);
+
+ if (Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+
+ Delay = DivU64x32(Timeout, 1000) + 1;
+ do {
+ AltRegister = IdeReadPortB (PciIo, IdeRegisters->AltOrDev);
+ //
+ // Wait for BSY == 0, then judge if DRDY is set or ERR is set
+ //
+ if ((AltRegister & ATA_STSREG_BSY) == 0) {
+ if ((AltRegister & ATA_STSREG_ERR) == ATA_STSREG_ERR) {
+ ErrorRegister = IdeReadPortB (PciIo, IdeRegisters->ErrOrFeature);
+
+ if ((ErrorRegister & ATA_ERRREG_ABRT) == ATA_ERRREG_ABRT) {
+ return EFI_ABORTED;
+ }
+ return EFI_DEVICE_ERROR;
+ }
+
+ if ((AltRegister & ATA_STSREG_DRDY) == ATA_STSREG_DRDY) {
+ return EFI_SUCCESS;
+ } else {
+ return EFI_DEVICE_ERROR;
+ }
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay (100);
+
+ Delay--;
+ } while (InfiniteWait || (Delay > 0));
+
+ return EFI_TIMEOUT;
+}
+
+/**
+ This function is used to poll for the BSY bit clear in the Status Register. BSY
+ is clear when the device is not busy. Every command must be sent after device is not busy.
+
+ @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
+ @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param Timeout The time to complete the command, uses 100ns as a unit.
+
+ @retval EFI_SUCCESS BSY bit clear within the time out.
+ @retval EFI_TIMEOUT BSY bit not clear within the time out.
+
+ @note Read Status Register will clear interrupt status.
+**/
+EFI_STATUS
+EFIAPI
+WaitForBSYClear (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN UINT64 Timeout
+ )
+{
+ UINT64 Delay;
+ UINT8 StatusRegister;
+ BOOLEAN InfiniteWait;
+
+ ASSERT (PciIo != NULL);
+ ASSERT (IdeRegisters != NULL);
+
+ if (Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+
+ Delay = DivU64x32(Timeout, 1000) + 1;
+ do {
+ StatusRegister = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus);
+
+ if ((StatusRegister & ATA_STSREG_BSY) == 0x00) {
+ return EFI_SUCCESS;
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay (100);
+
+ Delay--;
+
+ } while (InfiniteWait || (Delay > 0));
+
+ return EFI_TIMEOUT;
+}
+
+/**
+ This function is used to poll for the BSY bit clear in the Status Register. BSY
+ is clear when the device is not busy. Every command must be sent after device is not busy.
+
+ @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
+ @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param Timeout The time to complete the command, uses 100ns as a unit.
+
+ @retval EFI_SUCCESS BSY bit clear within the time out.
+ @retval EFI_TIMEOUT BSY bit not clear within the time out.
+
+ @note Read Status Register will clear interrupt status.
+**/
+EFI_STATUS
+EFIAPI
+WaitForBSYClear2 (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN UINT64 Timeout
+ )
+{
+ UINT64 Delay;
+ UINT8 AltStatusRegister;
+ BOOLEAN InfiniteWait;
+
+ ASSERT (PciIo != NULL);
+ ASSERT (IdeRegisters != NULL);
+
+ if (Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+
+ Delay = DivU64x32(Timeout, 1000) + 1;
+ do {
+ AltStatusRegister = IdeReadPortB (PciIo, IdeRegisters->AltOrDev);
+
+ if ((AltStatusRegister & ATA_STSREG_BSY) == 0x00) {
+ return EFI_SUCCESS;
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay (100);
+
+ Delay--;
+
+ } while (InfiniteWait || (Delay > 0));
+
+ return EFI_TIMEOUT;
+}
+
+/**
+ Get IDE i/o port registers' base addresses by mode.
+
+ In 'Compatibility' mode, use fixed addresses.
+ In Native-PCI mode, get base addresses from BARs in the PCI IDE controller's
+ Configuration Space.
+
+ The steps to get IDE i/o port registers' base addresses for each channel
+ as follows:
+
+ 1. Examine the Programming Interface byte of the Class Code fields in PCI IDE
+ controller's Configuration Space to determine the operating mode.
+
+ 2. a) In 'Compatibility' mode, use fixed addresses shown in the Table 1 below.
+ ___________________________________________
+ | | Command Block | Control Block |
+ | Channel | Registers | Registers |
+ |___________|_______________|_______________|
+ | Primary | 1F0h - 1F7h | 3F6h - 3F7h |
+ |___________|_______________|_______________|
+ | Secondary | 170h - 177h | 376h - 377h |
+ |___________|_______________|_______________|
+
+ Table 1. Compatibility resource mappings
+
+ b) In Native-PCI mode, IDE registers are mapped into IO space using the BARs
+ in IDE controller's PCI Configuration Space, shown in the Table 2 below.
+ ___________________________________________________
+ | | Command Block | Control Block |
+ | Channel | Registers | Registers |
+ |___________|___________________|___________________|
+ | Primary | BAR at offset 0x10| BAR at offset 0x14|
+ |___________|___________________|___________________|
+ | Secondary | BAR at offset 0x18| BAR at offset 0x1C|
+ |___________|___________________|___________________|
+
+ Table 2. BARs for Register Mapping
+
+ @param[in] PciIo Pointer to the EFI_PCI_IO_PROTOCOL instance
+ @param[in, out] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to
+ store the IDE i/o port registers' base addresses
+
+ @retval EFI_UNSUPPORTED Return this value when the BARs is not IO type
+ @retval EFI_SUCCESS Get the Base address successfully
+ @retval Other Read the pci configureation data error
+
+**/
+EFI_STATUS
+EFIAPI
+GetIdeRegisterIoAddr (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN OUT EFI_IDE_REGISTERS *IdeRegisters
+ )
+{
+ EFI_STATUS Status;
+ PCI_TYPE00 PciData;
+ UINT16 CommandBlockBaseAddr;
+ UINT16 ControlBlockBaseAddr;
+ UINT16 BusMasterBaseAddr;
+
+ if ((PciIo == NULL) || (IdeRegisters == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = PciIo->Pci.Read (
+ PciIo,
+ EfiPciIoWidthUint8,
+ 0,
+ sizeof (PciData),
+ &PciData
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ BusMasterBaseAddr = (UINT16) ((PciData.Device.Bar[4] & 0x0000fff0));
+
+ if ((PciData.Hdr.ClassCode[0] & IDE_PRIMARY_OPERATING_MODE) == 0) {
+ CommandBlockBaseAddr = 0x1f0;
+ ControlBlockBaseAddr = 0x3f6;
+ } else {
+ //
+ // The BARs should be of IO type
+ //
+ if ((PciData.Device.Bar[0] & BIT0) == 0 ||
+ (PciData.Device.Bar[1] & BIT0) == 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ CommandBlockBaseAddr = (UINT16) (PciData.Device.Bar[0] & 0x0000fff8);
+ ControlBlockBaseAddr = (UINT16) ((PciData.Device.Bar[1] & 0x0000fffc) + 2);
+ }
+
+ //
+ // Calculate IDE primary channel I/O register base address.
+ //
+ IdeRegisters[EfiIdePrimary].Data = CommandBlockBaseAddr;
+ IdeRegisters[EfiIdePrimary].ErrOrFeature = (UINT16) (CommandBlockBaseAddr + 0x01);
+ IdeRegisters[EfiIdePrimary].SectorCount = (UINT16) (CommandBlockBaseAddr + 0x02);
+ IdeRegisters[EfiIdePrimary].SectorNumber = (UINT16) (CommandBlockBaseAddr + 0x03);
+ IdeRegisters[EfiIdePrimary].CylinderLsb = (UINT16) (CommandBlockBaseAddr + 0x04);
+ IdeRegisters[EfiIdePrimary].CylinderMsb = (UINT16) (CommandBlockBaseAddr + 0x05);
+ IdeRegisters[EfiIdePrimary].Head = (UINT16) (CommandBlockBaseAddr + 0x06);
+ IdeRegisters[EfiIdePrimary].CmdOrStatus = (UINT16) (CommandBlockBaseAddr + 0x07);
+ IdeRegisters[EfiIdePrimary].AltOrDev = ControlBlockBaseAddr;
+ IdeRegisters[EfiIdePrimary].BusMasterBaseAddr = BusMasterBaseAddr;
+
+ if ((PciData.Hdr.ClassCode[0] & IDE_SECONDARY_OPERATING_MODE) == 0) {
+ CommandBlockBaseAddr = 0x170;
+ ControlBlockBaseAddr = 0x376;
+ } else {
+ //
+ // The BARs should be of IO type
+ //
+ if ((PciData.Device.Bar[2] & BIT0) == 0 ||
+ (PciData.Device.Bar[3] & BIT0) == 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ CommandBlockBaseAddr = (UINT16) (PciData.Device.Bar[2] & 0x0000fff8);
+ ControlBlockBaseAddr = (UINT16) ((PciData.Device.Bar[3] & 0x0000fffc) + 2);
+ }
+
+ //
+ // Calculate IDE secondary channel I/O register base address.
+ //
+ IdeRegisters[EfiIdeSecondary].Data = CommandBlockBaseAddr;
+ IdeRegisters[EfiIdeSecondary].ErrOrFeature = (UINT16) (CommandBlockBaseAddr + 0x01);
+ IdeRegisters[EfiIdeSecondary].SectorCount = (UINT16) (CommandBlockBaseAddr + 0x02);
+ IdeRegisters[EfiIdeSecondary].SectorNumber = (UINT16) (CommandBlockBaseAddr + 0x03);
+ IdeRegisters[EfiIdeSecondary].CylinderLsb = (UINT16) (CommandBlockBaseAddr + 0x04);
+ IdeRegisters[EfiIdeSecondary].CylinderMsb = (UINT16) (CommandBlockBaseAddr + 0x05);
+ IdeRegisters[EfiIdeSecondary].Head = (UINT16) (CommandBlockBaseAddr + 0x06);
+ IdeRegisters[EfiIdeSecondary].CmdOrStatus = (UINT16) (CommandBlockBaseAddr + 0x07);
+ IdeRegisters[EfiIdeSecondary].AltOrDev = ControlBlockBaseAddr;
+ IdeRegisters[EfiIdeSecondary].BusMasterBaseAddr = (UINT16) (BusMasterBaseAddr + 0x8);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function is used to implement the Soft Reset on the specified device. But,
+ the ATA Soft Reset mechanism is so strong a reset method that it will force
+ resetting on both devices connected to the same cable.
+
+ It is called by IdeBlkIoReset(), a interface function of Block
+ I/O protocol.
+
+ This function can also be used by the ATAPI device to perform reset when
+ ATAPI Reset command is failed.
+
+ @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
+ @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param Timeout The time to complete the command, uses 100ns as a unit.
+
+ @retval EFI_SUCCESS Soft reset completes successfully.
+ @retval EFI_DEVICE_ERROR Any step during the reset process is failed.
+
+ @note The registers initial values after ATA soft reset are different
+ to the ATA device and ATAPI device.
+**/
+EFI_STATUS
+EFIAPI
+AtaSoftReset (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN UINT64 Timeout
+ )
+{
+ UINT8 DeviceControl;
+
+ DeviceControl = 0;
+ //
+ // disable Interrupt and set SRST bit to initiate soft reset
+ //
+ DeviceControl = ATA_CTLREG_SRST | ATA_CTLREG_IEN_L;
+
+ IdeWritePortB (PciIo, IdeRegisters->AltOrDev, DeviceControl);
+
+ //
+ // SRST should assert for at least 5 us, we use 10 us for
+ // better compatibility
+ //
+ MicroSecondDelay (10);
+
+ //
+ // Enable interrupt to support UDMA, and clear SRST bit
+ //
+ DeviceControl = 0;
+ IdeWritePortB (PciIo, IdeRegisters->AltOrDev, DeviceControl);
+
+ //
+ // Wait for at least 10 ms to check BSY status, we use 10 ms
+ // for better compatibility
+ //
+ MicroSecondDelay (10000);
+
+ //
+ // slave device needs at most 31ms to clear BSY
+ //
+ if (WaitForBSYClear (PciIo, IdeRegisters, Timeout) == EFI_TIMEOUT) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Send ATA Ext command into device with NON_DATA protocol.
+
+ @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
+ @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure.
+ @param Timeout The time to complete the command, uses 100ns as a unit.
+
+ @retval EFI_SUCCESS Reading succeed
+ @retval EFI_DEVICE_ERROR Error executing commands on this device.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaIssueCommand (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN UINT64 Timeout
+ )
+{
+ EFI_STATUS Status;
+ UINT8 DeviceHead;
+ UINT8 AtaCommand;
+
+ ASSERT (PciIo != NULL);
+ ASSERT (IdeRegisters != NULL);
+ ASSERT (AtaCommandBlock != NULL);
+
+ DeviceHead = AtaCommandBlock->AtaDeviceHead;
+ AtaCommand = AtaCommandBlock->AtaCommand;
+
+ Status = WaitForBSYClear (PciIo, IdeRegisters, Timeout);
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Select device (bit4), set LBA mode(bit6) (use 0xe0 for compatibility)
+ //
+ IdeWritePortB (PciIo, IdeRegisters->Head, (UINT8) (0xe0 | DeviceHead));
+
+ //
+ // set all the command parameters
+ // Before write to all the following registers, BSY and DRQ must be 0.
+ //
+ Status = DRQClear2 (PciIo, IdeRegisters, Timeout);
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Fill the feature register, which is a two-byte FIFO. Need write twice.
+ //
+ IdeWritePortB (PciIo, IdeRegisters->ErrOrFeature, AtaCommandBlock->AtaFeaturesExp);
+ IdeWritePortB (PciIo, IdeRegisters->ErrOrFeature, AtaCommandBlock->AtaFeatures);
+
+ //
+ // Fill the sector count register, which is a two-byte FIFO. Need write twice.
+ //
+ IdeWritePortB (PciIo, IdeRegisters->SectorCount, AtaCommandBlock->AtaSectorCountExp);
+ IdeWritePortB (PciIo, IdeRegisters->SectorCount, AtaCommandBlock->AtaSectorCount);
+
+ //
+ // Fill the start LBA registers, which are also two-byte FIFO
+ //
+ IdeWritePortB (PciIo, IdeRegisters->SectorNumber, AtaCommandBlock->AtaSectorNumberExp);
+ IdeWritePortB (PciIo, IdeRegisters->SectorNumber, AtaCommandBlock->AtaSectorNumber);
+
+ IdeWritePortB (PciIo, IdeRegisters->CylinderLsb, AtaCommandBlock->AtaCylinderLowExp);
+ IdeWritePortB (PciIo, IdeRegisters->CylinderLsb, AtaCommandBlock->AtaCylinderLow);
+
+ IdeWritePortB (PciIo, IdeRegisters->CylinderMsb, AtaCommandBlock->AtaCylinderHighExp);
+ IdeWritePortB (PciIo, IdeRegisters->CylinderMsb, AtaCommandBlock->AtaCylinderHigh);
+
+ //
+ // Send command via Command Register
+ //
+ IdeWritePortB (PciIo, IdeRegisters->CmdOrStatus, AtaCommand);
+
+ //
+ // Stall at least 400 microseconds.
+ //
+ MicroSecondDelay (400);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function is used to send out ATA commands conforms to the PIO Data In Protocol.
+
+ @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data
+ structure.
+ @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param[in, out] Buffer A pointer to the source buffer for the data.
+ @param[in] ByteCount The length of the data.
+ @param[in] Read Flag used to determine the data transfer direction.
+ Read equals 1, means data transferred from device
+ to host;Read equals 0, means data transferred
+ from host to device.
+ @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure.
+ @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+ @param[in] Timeout The time to complete the command, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_SUCCESS send out the ATA command and device send required data successfully.
+ @retval EFI_DEVICE_ERROR command sent failed.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPioDataInOut (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN OUT VOID *Buffer,
+ IN UINT64 ByteCount,
+ IN BOOLEAN Read,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ )
+{
+ UINTN WordCount;
+ UINTN Increment;
+ UINT16 *Buffer16;
+ EFI_STATUS Status;
+
+ if ((PciIo == NULL) || (IdeRegisters == NULL) || (Buffer == NULL) || (AtaCommandBlock == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Issue ATA command
+ //
+ Status = AtaIssueCommand (PciIo, IdeRegisters, AtaCommandBlock, Timeout);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Exit;
+ }
+
+ Buffer16 = (UINT16 *) Buffer;
+
+ //
+ // According to PIO data in protocol, host can perform a series of reads to
+ // the data register after each time device set DRQ ready;
+ // The data size of "a series of read" is command specific.
+ // For most ATA command, data size received from device will not exceed
+ // 1 sector, hence the data size for "a series of read" can be the whole data
+ // size of one command request.
+ // For ATA command such as Read Sector command, the data size of one ATA
+ // command request is often larger than 1 sector, according to the
+ // Read Sector command, the data size of "a series of read" is exactly 1
+ // sector.
+ // Here for simplification reason, we specify the data size for
+ // "a series of read" to 1 sector (256 words) if data size of one ATA command
+ // request is larger than 256 words.
+ //
+ Increment = 256;
+
+ //
+ // used to record bytes of currently transfered data
+ //
+ WordCount = 0;
+
+ while (WordCount < RShiftU64(ByteCount, 1)) {
+ //
+ // Poll DRQ bit set, data transfer can be performed only when DRQ is ready
+ //
+ Status = DRQReady2 (PciIo, IdeRegisters, Timeout);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Exit;
+ }
+
+ //
+ // Get the byte count for one series of read
+ //
+ if ((WordCount + Increment) > RShiftU64(ByteCount, 1)) {
+ Increment = (UINTN)(RShiftU64(ByteCount, 1) - WordCount);
+ }
+
+ if (Read) {
+ IdeReadPortWMultiple (
+ PciIo,
+ IdeRegisters->Data,
+ Increment,
+ Buffer16
+ );
+ } else {
+ IdeWritePortWMultiple (
+ PciIo,
+ IdeRegisters->Data,
+ Increment,
+ Buffer16
+ );
+ }
+
+ Status = CheckStatusRegister (PciIo, IdeRegisters);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Exit;
+ }
+
+ WordCount += Increment;
+ Buffer16 += Increment;
+ }
+
+ Status = DRQClear (PciIo, IdeRegisters, Timeout);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Exit;
+ }
+
+Exit:
+ //
+ // Dump All Ide registers to ATA_STATUS_BLOCK
+ //
+ DumpAllIdeRegisters (PciIo, IdeRegisters, AtaStatusBlock);
+
+ //
+ // Not support the Non-blocking now,just do the blocking process.
+ //
+ return Status;
+}
+
+/**
+ Send ATA command into device with NON_DATA protocol
+
+ @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE
+ data structure.
+ @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data
+ structure.
+ @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+ @param[in] Timeout The time to complete the command, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_SUCCESS Reading succeed
+ @retval EFI_ABORTED Command failed
+ @retval EFI_DEVICE_ERROR Device status error.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaNonDataCommandIn (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ )
+{
+ EFI_STATUS Status;
+
+ if ((PciIo == NULL) || (IdeRegisters == NULL) || (AtaCommandBlock == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Issue ATA command
+ //
+ Status = AtaIssueCommand (PciIo, IdeRegisters, AtaCommandBlock, Timeout);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Exit;
+ }
+
+ //
+ // Wait for command completion
+ //
+ Status = WaitForBSYClear (PciIo, IdeRegisters, Timeout);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Exit;
+ }
+
+ Status = CheckStatusRegister (PciIo, IdeRegisters);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Exit;
+ }
+
+Exit:
+ //
+ // Dump All Ide registers to ATA_STATUS_BLOCK
+ //
+ DumpAllIdeRegisters (PciIo, IdeRegisters, AtaStatusBlock);
+
+ //
+ // Not support the Non-blocking now,just do the blocking process.
+ //
+ return Status;
+}
+
+/**
+ Wait for memory to be set.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param[in] Timeout The time to complete the command, uses 100ns as a unit.
+
+ @retval EFI_DEVICE_ERROR The memory is not set.
+ @retval EFI_TIMEOUT The memory setting is time out.
+ @retval EFI_SUCCESS The memory is correct set.
+
+**/
+EFI_STATUS
+AtaUdmStatusWait (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN UINT64 Timeout
+ )
+{
+ UINT8 RegisterValue;
+ EFI_STATUS Status;
+ UINT16 IoPortForBmis;
+ UINT64 Delay;
+ BOOLEAN InfiniteWait;
+
+ if (Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+
+ Delay = DivU64x32 (Timeout, 1000) + 1;
+
+ do {
+ Status = CheckStatusRegister (PciIo, IdeRegisters);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ break;
+ }
+
+ IoPortForBmis = (UINT16) (IdeRegisters->BusMasterBaseAddr + BMIS_OFFSET);
+ RegisterValue = IdeReadPortB (PciIo, IoPortForBmis);
+ if (((RegisterValue & BMIS_ERROR) != 0) || (Timeout == 0)) {
+ DEBUG ((EFI_D_ERROR, "ATA UDMA operation fails\n"));
+ Status = EFI_DEVICE_ERROR;
+ break;
+ }
+
+ if ((RegisterValue & BMIS_INTERRUPT) != 0) {
+ Status = EFI_SUCCESS;
+ break;
+ }
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay (100);
+ Delay--;
+ } while (InfiniteWait || (Delay > 0));
+
+ return Status;
+}
+
+/**
+ Check if the memory to be set.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+ @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+
+ @retval EFI_DEVICE_ERROR The memory setting met a issue.
+ @retval EFI_NOT_READY The memory is not set.
+ @retval EFI_TIMEOUT The memory setting is time out.
+ @retval EFI_SUCCESS The memory is correct set.
+
+**/
+EFI_STATUS
+AtaUdmStatusCheck (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN ATA_NONBLOCK_TASK *Task,
+ IN EFI_IDE_REGISTERS *IdeRegisters
+ )
+{
+ UINT8 RegisterValue;
+ UINT16 IoPortForBmis;
+ EFI_STATUS Status;
+
+ Task->RetryTimes--;
+
+ Status = CheckStatusRegister (PciIo, IdeRegisters);
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ IoPortForBmis = (UINT16) (IdeRegisters->BusMasterBaseAddr + BMIS_OFFSET);
+ RegisterValue = IdeReadPortB (PciIo, IoPortForBmis);
+
+ if ((RegisterValue & BMIS_ERROR) != 0) {
+ DEBUG ((EFI_D_ERROR, "ATA UDMA operation fails\n"));
+ return EFI_DEVICE_ERROR;
+ }
+
+ if ((RegisterValue & BMIS_INTERRUPT) != 0) {
+ return EFI_SUCCESS;
+ }
+
+ if (!Task->InfiniteWait && (Task->RetryTimes == 0)) {
+ return EFI_TIMEOUT;
+ } else {
+ //
+ // The memory is not set.
+ //
+ return EFI_NOT_READY;
+ }
+}
+
+/**
+ Perform an ATA Udma operation (Read, ReadExt, Write, WriteExt).
+
+ @param[in] Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data
+ structure.
+ @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param[in] Read Flag used to determine the data transfer
+ direction. Read equals 1, means data transferred
+ from device to host;Read equals 0, means data
+ transferred from host to device.
+ @param[in] DataBuffer A pointer to the source buffer for the data.
+ @param[in] DataLength The length of the data.
+ @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure.
+ @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+ @param[in] Timeout The time to complete the command, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_SUCCESS the operation is successful.
+ @retval EFI_OUT_OF_RESOURCES Build PRD table failed
+ @retval EFI_UNSUPPORTED Unknown channel or operations command
+ @retval EFI_DEVICE_ERROR Ata command execute failed
+
+**/
+EFI_STATUS
+EFIAPI
+AtaUdmaInOut (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN BOOLEAN Read,
+ IN VOID *DataBuffer,
+ IN UINT64 DataLength,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ )
+{
+ EFI_STATUS Status;
+ UINT16 IoPortForBmic;
+ UINT16 IoPortForBmis;
+ UINT16 IoPortForBmid;
+
+ UINTN PrdTableSize;
+ EFI_PHYSICAL_ADDRESS PrdTableMapAddr;
+ VOID *PrdTableMap;
+ EFI_PHYSICAL_ADDRESS PrdTableBaseAddr;
+ EFI_ATA_DMA_PRD *TempPrdBaseAddr;
+ UINTN PrdTableNum;
+
+ UINT8 RegisterValue;
+ UINTN PageCount;
+ UINTN ByteCount;
+ UINTN ByteRemaining;
+ UINT8 DeviceControl;
+
+ VOID *BufferMap;
+ EFI_PHYSICAL_ADDRESS BufferMapAddress;
+ EFI_PCI_IO_PROTOCOL_OPERATION PciIoOperation;
+
+ UINT8 DeviceHead;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ EFI_TPL OldTpl;
+
+ UINTN AlignmentMask;
+ UINTN RealPageCount;
+ EFI_PHYSICAL_ADDRESS BaseAddr;
+ EFI_PHYSICAL_ADDRESS BaseMapAddr;
+
+ Status = EFI_SUCCESS;
+ PrdTableMap = NULL;
+ BufferMap = NULL;
+ PageCount = 0;
+ RealPageCount = 0;
+ BaseAddr = 0;
+ PciIo = Instance->PciIo;
+
+ if ((PciIo == NULL) || (IdeRegisters == NULL) || (DataBuffer == NULL) || (AtaCommandBlock == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Before starting the Blocking BlockIO operation, push to finish all non-blocking
+ // BlockIO tasks.
+ // Delay 1ms to simulate the blocking time out checking.
+ //
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+ while ((Task == NULL) && (!IsListEmpty (&Instance->NonBlockingTaskList))) {
+ AsyncNonBlockingTransferRoutine (NULL, Instance);
+ //
+ // Stall for 1 milliseconds.
+ //
+ MicroSecondDelay (1000);
+ }
+ gBS->RestoreTPL (OldTpl);
+
+ //
+ // The data buffer should be even alignment
+ //
+ if (((UINTN)DataBuffer & 0x1) != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Set relevant IO Port address.
+ //
+ IoPortForBmic = (UINT16) (IdeRegisters->BusMasterBaseAddr + BMIC_OFFSET);
+ IoPortForBmis = (UINT16) (IdeRegisters->BusMasterBaseAddr + BMIS_OFFSET);
+ IoPortForBmid = (UINT16) (IdeRegisters->BusMasterBaseAddr + BMID_OFFSET);
+
+ //
+ // For Blocking mode, start the command.
+ // For non-blocking mode, when the command is not started, start it, otherwise
+ // go to check the status.
+ //
+ if (((Task != NULL) && (!Task->IsStart)) || (Task == NULL)) {
+ //
+ // Calculate the number of PRD entry.
+ // Every entry in PRD table can specify a 64K memory region.
+ //
+ PrdTableNum = (UINTN)(RShiftU64(DataLength, 16) + 1);
+
+ //
+ // Make sure that the memory region of PRD table is not cross 64K boundary
+ //
+ PrdTableSize = PrdTableNum * sizeof (EFI_ATA_DMA_PRD);
+ if (PrdTableSize > 0x10000) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Allocate buffer for PRD table initialization.
+ // Note Ide Bus Master spec said the descriptor table must be aligned on a 4 byte
+ // boundary and the table cannot cross a 64K boundary in memory.
+ //
+ PageCount = EFI_SIZE_TO_PAGES (PrdTableSize);
+ RealPageCount = PageCount + EFI_SIZE_TO_PAGES (SIZE_64KB);
+
+ //
+ // Make sure that PageCount plus EFI_SIZE_TO_PAGES (SIZE_64KB) does not overflow.
+ //
+ ASSERT (RealPageCount > PageCount);
+
+ Status = PciIo->AllocateBuffer (
+ PciIo,
+ AllocateAnyPages,
+ EfiBootServicesData,
+ RealPageCount,
+ (VOID **)&BaseAddr,
+ 0
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ ByteCount = EFI_PAGES_TO_SIZE (RealPageCount);
+ Status = PciIo->Map (
+ PciIo,
+ EfiPciIoOperationBusMasterCommonBuffer,
+ (VOID*)(UINTN)BaseAddr,
+ &ByteCount,
+ &BaseMapAddr,
+ &PrdTableMap
+ );
+ if (EFI_ERROR (Status) || (ByteCount != EFI_PAGES_TO_SIZE (RealPageCount))) {
+ //
+ // If the data length actually mapped is not equal to the requested amount,
+ // it means the DMA operation may be broken into several discontinuous smaller chunks.
+ // Can't handle this case.
+ //
+ PciIo->FreeBuffer (PciIo, RealPageCount, (VOID*)(UINTN)BaseAddr);
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ ZeroMem ((VOID *) ((UINTN) BaseAddr), ByteCount);
+
+ //
+ // Calculate the 64K align address as PRD Table base address.
+ //
+ AlignmentMask = SIZE_64KB - 1;
+ PrdTableBaseAddr = ((UINTN) BaseAddr + AlignmentMask) & ~AlignmentMask;
+ PrdTableMapAddr = ((UINTN) BaseMapAddr + AlignmentMask) & ~AlignmentMask;
+
+ //
+ // Map the host address of DataBuffer to DMA master address.
+ //
+ if (Read) {
+ PciIoOperation = EfiPciIoOperationBusMasterWrite;
+ } else {
+ PciIoOperation = EfiPciIoOperationBusMasterRead;
+ }
+
+ ByteCount = (UINTN)DataLength;
+ Status = PciIo->Map (
+ PciIo,
+ PciIoOperation,
+ DataBuffer,
+ &ByteCount,
+ &BufferMapAddress,
+ &BufferMap
+ );
+ if (EFI_ERROR (Status) || (ByteCount != DataLength)) {
+ PciIo->Unmap (PciIo, PrdTableMap);
+ PciIo->FreeBuffer (PciIo, RealPageCount, (VOID*)(UINTN)BaseAddr);
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ //
+ // According to Ata spec, it requires the buffer address and size to be even.
+ //
+ ASSERT ((BufferMapAddress & 0x1) == 0);
+ ASSERT ((ByteCount & 0x1) == 0);
+
+ //
+ // Fill the PRD table with appropriate bus master address of data buffer and data length.
+ //
+ ByteRemaining = ByteCount;
+ TempPrdBaseAddr = (EFI_ATA_DMA_PRD*)(UINTN)PrdTableBaseAddr;
+ while (ByteRemaining != 0) {
+ if (ByteRemaining <= 0x10000) {
+ TempPrdBaseAddr->RegionBaseAddr = (UINT32) ((UINTN) BufferMapAddress);
+ TempPrdBaseAddr->ByteCount = (UINT16) ByteRemaining;
+ TempPrdBaseAddr->EndOfTable = 0x8000;
+ break;
+ }
+
+ TempPrdBaseAddr->RegionBaseAddr = (UINT32) ((UINTN) BufferMapAddress);
+ TempPrdBaseAddr->ByteCount = (UINT16) 0x0;
+
+ ByteRemaining -= 0x10000;
+ BufferMapAddress += 0x10000;
+ TempPrdBaseAddr++;
+ }
+
+ //
+ // Start to enable the DMA operation
+ //
+ DeviceHead = AtaCommandBlock->AtaDeviceHead;
+
+ IdeWritePortB (PciIo, IdeRegisters->Head, (UINT8)(0xe0 | DeviceHead));
+
+ //
+ // Enable interrupt to support UDMA
+ //
+ DeviceControl = 0;
+ IdeWritePortB (PciIo, IdeRegisters->AltOrDev, DeviceControl);
+
+ //
+ // Read BMIS register and clear ERROR and INTR bit
+ //
+ RegisterValue = IdeReadPortB(PciIo, IoPortForBmis);
+ RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR);
+ IdeWritePortB (PciIo, IoPortForBmis, RegisterValue);
+
+ //
+ // Set the base address to BMID register
+ //
+ IdeWritePortDW (PciIo, IoPortForBmid, (UINT32)PrdTableMapAddr);
+
+ //
+ // Set BMIC register to identify the operation direction
+ //
+ RegisterValue = IdeReadPortB(PciIo, IoPortForBmic);
+ if (Read) {
+ RegisterValue |= BMIC_NREAD;
+ } else {
+ RegisterValue &= ~((UINT8) BMIC_NREAD);
+ }
+ IdeWritePortB (PciIo, IoPortForBmic, RegisterValue);
+
+ if (Task != NULL) {
+ Task->Map = BufferMap;
+ Task->TableMap = PrdTableMap;
+ Task->MapBaseAddress = (EFI_ATA_DMA_PRD*)(UINTN)BaseAddr;
+ Task->PageCount = RealPageCount;
+ Task->IsStart = TRUE;
+ }
+
+ //
+ // Issue ATA command
+ //
+ Status = AtaIssueCommand (PciIo, IdeRegisters, AtaCommandBlock, Timeout);
+
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Exit;
+ }
+
+ Status = CheckStatusRegister (PciIo, IdeRegisters);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Exit;
+ }
+ //
+ // Set START bit of BMIC register
+ //
+ RegisterValue = IdeReadPortB(PciIo, IoPortForBmic);
+ RegisterValue |= BMIC_START;
+ IdeWritePortB(PciIo, IoPortForBmic, RegisterValue);
+
+ }
+
+ //
+ // Check the INTERRUPT and ERROR bit of BMIS
+ //
+ if (Task != NULL) {
+ Status = AtaUdmStatusCheck (PciIo, Task, IdeRegisters);
+ } else {
+ Status = AtaUdmStatusWait (PciIo, IdeRegisters, Timeout);
+ }
+
+ //
+ // For blocking mode, clear registers and free buffers.
+ // For non blocking mode, when the related registers have been set or time
+ // out, or a error has been happened, it needs to clear the register and free
+ // buffer.
+ //
+ if ((Task == NULL) || Status != EFI_NOT_READY) {
+ //
+ // Read BMIS register and clear ERROR and INTR bit
+ //
+ RegisterValue = IdeReadPortB (PciIo, IoPortForBmis);
+ RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR);
+ IdeWritePortB (PciIo, IoPortForBmis, RegisterValue);
+
+ //
+ // Read Status Register of IDE device to clear interrupt
+ //
+ RegisterValue = IdeReadPortB(PciIo, IdeRegisters->CmdOrStatus);
+
+ //
+ // Clear START bit of BMIC register
+ //
+ RegisterValue = IdeReadPortB(PciIo, IoPortForBmic);
+ RegisterValue &= ~((UINT8) BMIC_START);
+ IdeWritePortB (PciIo, IoPortForBmic, RegisterValue);
+
+ //
+ // Disable interrupt of Select device
+ //
+ DeviceControl = IdeReadPortB (PciIo, IdeRegisters->AltOrDev);
+ DeviceControl |= ATA_CTLREG_IEN_L;
+ IdeWritePortB (PciIo, IdeRegisters->AltOrDev, DeviceControl);
+ //
+ // Stall for 10 milliseconds.
+ //
+ MicroSecondDelay (10000);
+
+ }
+
+Exit:
+ //
+ // Free all allocated resource
+ //
+ if ((Task == NULL) || Status != EFI_NOT_READY) {
+ if (Task != NULL) {
+ PciIo->Unmap (PciIo, Task->TableMap);
+ PciIo->FreeBuffer (PciIo, Task->PageCount, Task->MapBaseAddress);
+ PciIo->Unmap (PciIo, Task->Map);
+ } else {
+ PciIo->Unmap (PciIo, PrdTableMap);
+ PciIo->FreeBuffer (PciIo, RealPageCount, (VOID*)(UINTN)BaseAddr);
+ PciIo->Unmap (PciIo, BufferMap);
+ }
+
+ //
+ // Dump All Ide registers to ATA_STATUS_BLOCK
+ //
+ DumpAllIdeRegisters (PciIo, IdeRegisters, AtaStatusBlock);
+ }
+
+ return Status;
+}
+
+/**
+ This function reads the pending data in the device.
+
+ @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
+ @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+
+ @retval EFI_SUCCESS Successfully read.
+ @retval EFI_NOT_READY The BSY is set avoiding reading.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPacketReadPendingData (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters
+ )
+{
+ UINT8 AltRegister;
+ UINT16 TempWordBuffer;
+
+ AltRegister = IdeReadPortB (PciIo, IdeRegisters->AltOrDev);
+ if ((AltRegister & ATA_STSREG_BSY) == ATA_STSREG_BSY) {
+ return EFI_NOT_READY;
+ }
+
+ if ((AltRegister & (ATA_STSREG_BSY | ATA_STSREG_DRQ)) == ATA_STSREG_DRQ) {
+ TempWordBuffer = IdeReadPortB (PciIo, IdeRegisters->AltOrDev);
+ while ((TempWordBuffer & (ATA_STSREG_BSY | ATA_STSREG_DRQ)) == ATA_STSREG_DRQ) {
+ IdeReadPortWMultiple (
+ PciIo,
+ IdeRegisters->Data,
+ 1,
+ &TempWordBuffer
+ );
+ TempWordBuffer = IdeReadPortB (PciIo, IdeRegisters->AltOrDev);
+ }
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ This function is called by AtaPacketCommandExecute().
+ It is used to transfer data between host and device. The data direction is specified
+ by the fourth parameter.
+
+ @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
+ @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param Buffer Buffer contained data transferred between host and device.
+ @param ByteCount Data size in byte unit of the buffer.
+ @param Read Flag used to determine the data transfer direction.
+ Read equals 1, means data transferred from device to host;
+ Read equals 0, means data transferred from host to device.
+ @param Timeout Timeout value for wait DRQ ready before each data stream's transfer
+ , uses 100ns as a unit.
+
+ @retval EFI_SUCCESS data is transferred successfully.
+ @retval EFI_DEVICE_ERROR the device failed to transfer data.
+**/
+EFI_STATUS
+EFIAPI
+AtaPacketReadWrite (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN OUT VOID *Buffer,
+ IN UINT64 ByteCount,
+ IN BOOLEAN Read,
+ IN UINT64 Timeout
+ )
+{
+ UINT32 RequiredWordCount;
+ UINT32 ActualWordCount;
+ UINT32 WordCount;
+ EFI_STATUS Status;
+ UINT16 *PtrBuffer;
+
+ //
+ // No data transfer is premitted.
+ //
+ if (ByteCount == 0) {
+ return EFI_SUCCESS;
+ }
+
+ PtrBuffer = Buffer;
+ RequiredWordCount = (UINT32)RShiftU64(ByteCount, 1);
+ //
+ // ActuralWordCount means the word count of data really transferred.
+ //
+ ActualWordCount = 0;
+
+ while (ActualWordCount < RequiredWordCount) {
+ //
+ // before each data transfer stream, the host should poll DRQ bit ready,
+ // to see whether indicates device is ready to transfer data.
+ //
+ Status = DRQReady2 (PciIo, IdeRegisters, Timeout);
+ if (EFI_ERROR (Status)) {
+ return CheckStatusRegister (PciIo, IdeRegisters);
+ }
+
+ //
+ // get current data transfer size from Cylinder Registers.
+ //
+ WordCount = IdeReadPortB (PciIo, IdeRegisters->CylinderMsb) << 8;
+ WordCount = WordCount | IdeReadPortB (PciIo, IdeRegisters->CylinderLsb);
+ WordCount = WordCount & 0xffff;
+ WordCount /= 2;
+
+ WordCount = MIN (WordCount, (RequiredWordCount - ActualWordCount));
+
+ if (Read) {
+ IdeReadPortWMultiple (
+ PciIo,
+ IdeRegisters->Data,
+ WordCount,
+ PtrBuffer
+ );
+ } else {
+ IdeWritePortWMultiple (
+ PciIo,
+ IdeRegisters->Data,
+ WordCount,
+ PtrBuffer
+ );
+ }
+
+ //
+ // read status register to check whether error happens.
+ //
+ Status = CheckStatusRegister (PciIo, IdeRegisters);
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ PtrBuffer += WordCount;
+ ActualWordCount += WordCount;
+ }
+
+ if (Read) {
+ //
+ // In the case where the drive wants to send more data than we need to read,
+ // the DRQ bit will be set and cause delays from DRQClear2().
+ // We need to read data from the drive until it clears DRQ so we can move on.
+ //
+ AtaPacketReadPendingData (PciIo, IdeRegisters);
+ }
+
+ //
+ // read status register to check whether error happens.
+ //
+ Status = CheckStatusRegister (PciIo, IdeRegisters);
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // After data transfer is completed, normally, DRQ bit should clear.
+ //
+ Status = DRQClear (PciIo, IdeRegisters, Timeout);
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ return Status;
+}
+
+/**
+ This function is used to send out ATAPI commands conforms to the Packet Command
+ with PIO Data In Protocol.
+
+ @param[in] PciIo Pointer to the EFI_PCI_IO_PROTOCOL instance
+ @param[in] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to
+ store the IDE i/o port registers' base addresses
+ @param[in] Channel The channel number of device.
+ @param[in] Device The device number of device.
+ @param[in] Packet A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET data structure.
+
+ @retval EFI_SUCCESS send out the ATAPI packet command successfully
+ and device sends data successfully.
+ @retval EFI_DEVICE_ERROR the device failed to send data.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPacketCommandExecute (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ IN EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet
+ )
+{
+ EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
+ EFI_STATUS Status;
+ UINT8 Count;
+ UINT8 PacketCommand[12];
+
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+
+ //
+ // Fill ATAPI Command Packet according to CDB.
+ // For Atapi cmd, its length should be less than or equal to 12 bytes.
+ //
+ if (Packet->CdbLength > 12) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ ZeroMem (PacketCommand, 12);
+ CopyMem (PacketCommand, Packet->Cdb, Packet->CdbLength);
+
+ //
+ // No OVL; No DMA
+ //
+ AtaCommandBlock.AtaFeatures = 0x00;
+ //
+ // set the transfersize to ATAPI_MAX_BYTE_COUNT to let the device
+ // determine how many data should be transferred.
+ //
+ AtaCommandBlock.AtaCylinderLow = (UINT8) (ATAPI_MAX_BYTE_COUNT & 0x00ff);
+ AtaCommandBlock.AtaCylinderHigh = (UINT8) (ATAPI_MAX_BYTE_COUNT >> 8);
+ AtaCommandBlock.AtaDeviceHead = (UINT8) (Device << 0x4);
+ AtaCommandBlock.AtaCommand = ATA_CMD_PACKET;
+
+ IdeWritePortB (PciIo, IdeRegisters->Head, (UINT8)(0xe0 | (Device << 0x4)));
+ //
+ // Disable interrupt
+ //
+ IdeWritePortB (PciIo, IdeRegisters->AltOrDev, ATA_DEFAULT_CTL);
+
+ //
+ // Issue ATA PACKET command firstly
+ //
+ Status = AtaIssueCommand (PciIo, IdeRegisters, &AtaCommandBlock, Packet->Timeout);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = DRQReady (PciIo, IdeRegisters, Packet->Timeout);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Send out ATAPI command packet
+ //
+ for (Count = 0; Count < 6; Count++) {
+ IdeWritePortW (PciIo, IdeRegisters->Data, *((UINT16*)PacketCommand + Count));
+ //
+ // Stall for 10 microseconds.
+ //
+ MicroSecondDelay (10);
+ }
+
+ //
+ // Read/Write the data of ATAPI Command
+ //
+ if (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ) {
+ Status = AtaPacketReadWrite (
+ PciIo,
+ IdeRegisters,
+ Packet->InDataBuffer,
+ Packet->InTransferLength,
+ TRUE,
+ Packet->Timeout
+ );
+ } else {
+ Status = AtaPacketReadWrite (
+ PciIo,
+ IdeRegisters,
+ Packet->OutDataBuffer,
+ Packet->OutTransferLength,
+ FALSE,
+ Packet->Timeout
+ );
+ }
+
+ return Status;
+}
+
+
+/**
+ Set the calculated Best transfer mode to a detected device.
+
+ @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
+ @param Channel The channel number of device.
+ @param Device The device number of device.
+ @param TransferMode A pointer to EFI_ATA_TRANSFER_MODE data structure.
+ @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+
+ @retval EFI_SUCCESS Set transfer mode successfully.
+ @retval EFI_DEVICE_ERROR Set transfer mode failed.
+ @retval EFI_OUT_OF_RESOURCES Allocate memory failed.
+
+**/
+EFI_STATUS
+EFIAPI
+SetDeviceTransferMode (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ IN EFI_ATA_TRANSFER_MODE *TransferMode,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
+ )
+{
+ EFI_STATUS Status;
+ EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
+
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+
+ AtaCommandBlock.AtaCommand = ATA_CMD_SET_FEATURES;
+ AtaCommandBlock.AtaDeviceHead = (UINT8)(Device << 0x4);
+ AtaCommandBlock.AtaFeatures = 0x03;
+ AtaCommandBlock.AtaSectorCount = *((UINT8 *)TransferMode);
+
+ //
+ // Send SET FEATURE command (sub command 0x03) to set pio mode.
+ //
+ Status = AtaNonDataCommandIn (
+ Instance->PciIo,
+ &Instance->IdeRegisters[Channel],
+ &AtaCommandBlock,
+ AtaStatusBlock,
+ ATA_ATAPI_TIMEOUT,
+ NULL
+ );
+
+ return Status;
+}
+
+/**
+ Set drive parameters for devices not support PACKETS command.
+
+ @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
+ @param Channel The channel number of device.
+ @param Device The device number of device.
+ @param DriveParameters A pointer to EFI_ATA_DRIVE_PARMS data structure.
+ @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+
+ @retval EFI_SUCCESS Set drive parameter successfully.
+ @retval EFI_DEVICE_ERROR Set drive parameter failed.
+ @retval EFI_OUT_OF_RESOURCES Allocate memory failed.
+
+**/
+EFI_STATUS
+EFIAPI
+SetDriveParameters (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ IN EFI_ATA_DRIVE_PARMS *DriveParameters,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
+ )
+{
+ EFI_STATUS Status;
+ EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
+
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+
+ AtaCommandBlock.AtaCommand = ATA_CMD_INIT_DRIVE_PARAM;
+ AtaCommandBlock.AtaSectorCount = DriveParameters->Sector;
+ AtaCommandBlock.AtaDeviceHead = (UINT8) ((Device << 0x4) + DriveParameters->Heads);
+
+ //
+ // Send Init drive parameters
+ //
+ Status = AtaNonDataCommandIn (
+ Instance->PciIo,
+ &Instance->IdeRegisters[Channel],
+ &AtaCommandBlock,
+ AtaStatusBlock,
+ ATA_ATAPI_TIMEOUT,
+ NULL
+ );
+
+ //
+ // Send Set Multiple parameters
+ //
+ AtaCommandBlock.AtaCommand = ATA_CMD_SET_MULTIPLE_MODE;
+ AtaCommandBlock.AtaSectorCount = DriveParameters->MultipleSector;
+ AtaCommandBlock.AtaDeviceHead = (UINT8)(Device << 0x4);
+
+ Status = AtaNonDataCommandIn (
+ Instance->PciIo,
+ &Instance->IdeRegisters[Channel],
+ &AtaCommandBlock,
+ AtaStatusBlock,
+ ATA_ATAPI_TIMEOUT,
+ NULL
+ );
+
+ return Status;
+}
+
+/**
+ Send SMART Return Status command to check if the execution of SMART cmd is successful or not.
+
+ @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
+ @param Channel The channel number of device.
+ @param Device The device number of device.
+ @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+
+ @retval EFI_SUCCESS Successfully get the return status of S.M.A.R.T command execution.
+ @retval Others Fail to get return status data.
+
+**/
+EFI_STATUS
+EFIAPI
+IdeAtaSmartReturnStatusCheck (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
+ )
+{
+ EFI_STATUS Status;
+ EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
+ UINT8 LBAMid;
+ UINT8 LBAHigh;
+
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+
+ AtaCommandBlock.AtaCommand = ATA_CMD_SMART;
+ AtaCommandBlock.AtaFeatures = ATA_SMART_RETURN_STATUS;
+ AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F;
+ AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2;
+ AtaCommandBlock.AtaDeviceHead = (UINT8) ((Device << 0x4) | 0xe0);
+
+ //
+ // Send S.M.A.R.T Read Return Status command to device
+ //
+ Status = AtaNonDataCommandIn (
+ Instance->PciIo,
+ &Instance->IdeRegisters[Channel],
+ &AtaCommandBlock,
+ AtaStatusBlock,
+ ATA_ATAPI_TIMEOUT,
+ NULL
+ );
+
+ if (EFI_ERROR (Status)) {
+ REPORT_STATUS_CODE (
+ EFI_ERROR_CODE | EFI_ERROR_MINOR,
+ (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLED)
+ );
+ return EFI_DEVICE_ERROR;
+ }
+
+ REPORT_STATUS_CODE (
+ EFI_PROGRESS_CODE,
+ (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_ENABLE)
+ );
+
+ LBAMid = IdeReadPortB (Instance->PciIo, Instance->IdeRegisters[Channel].CylinderLsb);
+ LBAHigh = IdeReadPortB (Instance->PciIo, Instance->IdeRegisters[Channel].CylinderMsb);
+
+ if ((LBAMid == 0x4f) && (LBAHigh == 0xc2)) {
+ //
+ // The threshold exceeded condition is not detected by the device
+ //
+ DEBUG ((EFI_D_INFO, "The S.M.A.R.T threshold exceeded condition is not detected\n"));
+ REPORT_STATUS_CODE (
+ EFI_PROGRESS_CODE,
+ (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_UNDERTHRESHOLD)
+ );
+ } else if ((LBAMid == 0xf4) && (LBAHigh == 0x2c)) {
+ //
+ // The threshold exceeded condition is detected by the device
+ //
+ DEBUG ((EFI_D_INFO, "The S.M.A.R.T threshold exceeded condition is detected\n"));
+ REPORT_STATUS_CODE (
+ EFI_PROGRESS_CODE,
+ (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_OVERTHRESHOLD)
+ );
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Enable SMART command of the disk if supported.
+
+ @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
+ @param Channel The channel number of device.
+ @param Device The device number of device.
+ @param IdentifyData A pointer to data buffer which is used to contain IDENTIFY data.
+ @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+
+**/
+VOID
+EFIAPI
+IdeAtaSmartSupport (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ IN EFI_IDENTIFY_DATA *IdentifyData,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
+ )
+{
+ EFI_STATUS Status;
+ EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
+
+ //
+ // Detect if the device supports S.M.A.R.T.
+ //
+ if ((IdentifyData->AtaData.command_set_supported_82 & 0x0001) != 0x0001) {
+ //
+ // S.M.A.R.T is not supported by the device
+ //
+ DEBUG ((EFI_D_INFO, "S.M.A.R.T feature is not supported at [%a] channel [%a] device!\n",
+ (Channel == 1) ? "secondary" : "primary", (Device == 1) ? "slave" : "master"));
+ REPORT_STATUS_CODE (
+ EFI_ERROR_CODE | EFI_ERROR_MINOR,
+ (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_NOTSUPPORTED)
+ );
+ } else {
+ //
+ // Check if the feature is enabled. If not, then enable S.M.A.R.T.
+ //
+ if ((IdentifyData->AtaData.command_set_feature_enb_85 & 0x0001) != 0x0001) {
+
+ REPORT_STATUS_CODE (
+ EFI_PROGRESS_CODE,
+ (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLE)
+ );
+
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+
+ AtaCommandBlock.AtaCommand = ATA_CMD_SMART;
+ AtaCommandBlock.AtaFeatures = ATA_SMART_ENABLE_OPERATION;
+ AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F;
+ AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2;
+ AtaCommandBlock.AtaDeviceHead = (UINT8) ((Device << 0x4) | 0xe0);
+
+ //
+ // Send S.M.A.R.T Enable command to device
+ //
+ Status = AtaNonDataCommandIn (
+ Instance->PciIo,
+ &Instance->IdeRegisters[Channel],
+ &AtaCommandBlock,
+ AtaStatusBlock,
+ ATA_ATAPI_TIMEOUT,
+ NULL
+ );
+
+ if (!EFI_ERROR (Status)) {
+ //
+ // Send S.M.A.R.T AutoSave command to device
+ //
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+
+ AtaCommandBlock.AtaCommand = ATA_CMD_SMART;
+ AtaCommandBlock.AtaFeatures = 0xD2;
+ AtaCommandBlock.AtaSectorCount = 0xF1;
+ AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F;
+ AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2;
+ AtaCommandBlock.AtaDeviceHead = (UINT8) ((Device << 0x4) | 0xe0);
+
+ Status = AtaNonDataCommandIn (
+ Instance->PciIo,
+ &Instance->IdeRegisters[Channel],
+ &AtaCommandBlock,
+ AtaStatusBlock,
+ ATA_ATAPI_TIMEOUT,
+ NULL
+ );
+ if (!EFI_ERROR (Status)) {
+ Status = IdeAtaSmartReturnStatusCheck (
+ Instance,
+ Channel,
+ Device,
+ AtaStatusBlock
+ );
+ }
+ }
+ }
+
+ DEBUG ((EFI_D_INFO, "Enabled S.M.A.R.T feature at [%a] channel [%a] device!\n",
+ (Channel == 1) ? "secondary" : "primary", (Device == 1) ? "slave" : "master"));
+
+ }
+
+ return ;
+}
+
+
+/**
+ Sends out an ATA Identify Command to the specified device.
+
+ This function is called by DiscoverIdeDevice() during its device
+ identification. It sends out the ATA Identify Command to the
+ specified device. Only ATA device responses to this command. If
+ the command succeeds, it returns the Identify data structure which
+ contains information about the device. This function extracts the
+ information it needs to fill the IDE_BLK_IO_DEV data structure,
+ including device type, media block size, media capacity, and etc.
+
+ @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
+ @param Channel The channel number of device.
+ @param Device The device number of device.
+ @param Buffer A pointer to data buffer which is used to contain IDENTIFY data.
+ @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+
+ @retval EFI_SUCCESS Identify ATA device successfully.
+ @retval EFI_DEVICE_ERROR ATA Identify Device Command failed or device is not ATA device.
+ @retval EFI_OUT_OF_RESOURCES Allocate memory failed.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaIdentify (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ IN OUT EFI_IDENTIFY_DATA *Buffer,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
+ )
+{
+ EFI_STATUS Status;
+ EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
+
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+
+ AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DRIVE;
+ AtaCommandBlock.AtaDeviceHead = (UINT8)(Device << 0x4);
+
+ Status = AtaPioDataInOut (
+ Instance->PciIo,
+ &Instance->IdeRegisters[Channel],
+ Buffer,
+ sizeof (EFI_IDENTIFY_DATA),
+ TRUE,
+ &AtaCommandBlock,
+ AtaStatusBlock,
+ ATA_ATAPI_TIMEOUT,
+ NULL
+ );
+
+ return Status;
+}
+
+/**
+ This function is called by DiscoverIdeDevice() during its device
+ identification.
+ Its main purpose is to get enough information for the device media
+ to fill in the Media data structure of the Block I/O Protocol interface.
+
+ There are 5 steps to reach such objective:
+ 1. Sends out the ATAPI Identify Command to the specified device.
+ Only ATAPI device responses to this command. If the command succeeds,
+ it returns the Identify data structure which filled with information
+ about the device. Since the ATAPI device contains removable media,
+ the only meaningful information is the device module name.
+ 2. Sends out ATAPI Inquiry Packet Command to the specified device.
+ This command will return inquiry data of the device, which contains
+ the device type information.
+ 3. Allocate sense data space for future use. We don't detect the media
+ presence here to improvement boot performance, especially when CD
+ media is present. The media detection will be performed just before
+ each BLK_IO read/write
+
+ @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
+ @param Channel The channel number of device.
+ @param Device The device number of device.
+ @param Buffer A pointer to data buffer which is used to contain IDENTIFY data.
+ @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+
+ @retval EFI_SUCCESS Identify ATAPI device successfully.
+ @retval EFI_DEVICE_ERROR ATA Identify Packet Device Command failed or device type
+ is not supported by this IDE driver.
+ @retval EFI_OUT_OF_RESOURCES Allocate memory failed.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaIdentifyPacket (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ IN OUT EFI_IDENTIFY_DATA *Buffer,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
+ )
+{
+ EFI_STATUS Status;
+ EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
+
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+
+ AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DEVICE;
+ AtaCommandBlock.AtaDeviceHead = (UINT8)(Device << 0x4);
+
+ //
+ // Send ATAPI Identify Command to get IDENTIFY data.
+ //
+ Status = AtaPioDataInOut (
+ Instance->PciIo,
+ &Instance->IdeRegisters[Channel],
+ (VOID *) Buffer,
+ sizeof (EFI_IDENTIFY_DATA),
+ TRUE,
+ &AtaCommandBlock,
+ AtaStatusBlock,
+ ATA_ATAPI_TIMEOUT,
+ NULL
+ );
+
+ return Status;
+}
+
+
+/**
+ This function is used for detect whether the IDE device exists in the
+ specified Channel as the specified Device Number.
+
+ There is two IDE channels: one is Primary Channel, the other is
+ Secondary Channel.(Channel is the logical name for the physical "Cable".)
+ Different channel has different register group.
+
+ On each IDE channel, at most two IDE devices attach,
+ one is called Device 0 (Master device), the other is called Device 1
+ (Slave device). The devices on the same channel co-use the same register
+ group, so before sending out a command for a specified device via command
+ register, it is a must to select the current device to accept the command
+ by set the device number in the Head/Device Register.
+
+ @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
+ @param IdeChannel The channel number of device.
+
+ @retval EFI_SUCCESS successfully detects device.
+ @retval other any failure during detection process will return this value.
+
+**/
+EFI_STATUS
+EFIAPI
+DetectAndConfigIdeDevice (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN UINT8 IdeChannel
+ )
+{
+ EFI_STATUS Status;
+ UINT8 SectorCountReg;
+ UINT8 LBALowReg;
+ UINT8 LBAMidReg;
+ UINT8 LBAHighReg;
+ EFI_ATA_DEVICE_TYPE DeviceType;
+ UINT8 IdeDevice;
+ EFI_IDE_REGISTERS *IdeRegisters;
+ EFI_IDENTIFY_DATA Buffer;
+
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ EFI_ATA_COLLECTIVE_MODE *SupportedModes;
+ EFI_ATA_TRANSFER_MODE TransferMode;
+ EFI_ATA_DRIVE_PARMS DriveParameters;
+
+ IdeRegisters = &Instance->IdeRegisters[IdeChannel];
+ IdeInit = Instance->IdeControllerInit;
+ PciIo = Instance->PciIo;
+
+ for (IdeDevice = 0; IdeDevice < EfiIdeMaxDevice; IdeDevice++) {
+ //
+ // Send ATA Device Execut Diagnostic command.
+ // This command should work no matter DRDY is ready or not
+ //
+ IdeWritePortB (PciIo, IdeRegisters->CmdOrStatus, ATA_CMD_EXEC_DRIVE_DIAG);
+
+ Status = WaitForBSYClear (PciIo, IdeRegisters, 350000000);
+ if (EFI_ERROR (Status)) {
+ DEBUG((EFI_D_ERROR, "New detecting method: Send Execute Diagnostic Command: WaitForBSYClear: Status: %d\n", Status));
+ continue;
+ }
+
+ //
+ // Select Master or Slave device to get the return signature for ATA DEVICE DIAGNOSTIC cmd.
+ //
+ IdeWritePortB (PciIo, IdeRegisters->Head, (UINT8)((IdeDevice << 4) | 0xe0));
+ //
+ // Stall for 1 milliseconds.
+ //
+ MicroSecondDelay (1000);
+
+ SectorCountReg = IdeReadPortB (PciIo, IdeRegisters->SectorCount);
+ LBALowReg = IdeReadPortB (PciIo, IdeRegisters->SectorNumber);
+ LBAMidReg = IdeReadPortB (PciIo, IdeRegisters->CylinderLsb);
+ LBAHighReg = IdeReadPortB (PciIo, IdeRegisters->CylinderMsb);
+
+ //
+ // Refer to ATA/ATAPI 4 Spec, section 9.1
+ //
+ if ((SectorCountReg == 0x1) && (LBALowReg == 0x1) && (LBAMidReg == 0x0) && (LBAHighReg == 0x0)) {
+ DeviceType = EfiIdeHarddisk;
+ } else if ((LBAMidReg == 0x14) && (LBAHighReg == 0xeb)) {
+ DeviceType = EfiIdeCdrom;
+ } else {
+ continue;
+ }
+
+ //
+ // Send IDENTIFY cmd to the device to test if it is really attached.
+ //
+ if (DeviceType == EfiIdeHarddisk) {
+ Status = AtaIdentify (Instance, IdeChannel, IdeDevice, &Buffer, NULL);
+ //
+ // if identifying ata device is failure, then try to send identify packet cmd.
+ //
+ if (EFI_ERROR (Status)) {
+ REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_EC_NOT_DETECTED));
+
+ DeviceType = EfiIdeCdrom;
+ Status = AtaIdentifyPacket (Instance, IdeChannel, IdeDevice, &Buffer, NULL);
+ }
+ } else {
+ Status = AtaIdentifyPacket (Instance, IdeChannel, IdeDevice, &Buffer, NULL);
+ //
+ // if identifying atapi device is failure, then try to send identify cmd.
+ //
+ if (EFI_ERROR (Status)) {
+ DeviceType = EfiIdeHarddisk;
+ Status = AtaIdentify (Instance, IdeChannel, IdeDevice, &Buffer, NULL);
+ }
+ }
+
+ if (EFI_ERROR (Status)) {
+ //
+ // No device is found at this port
+ //
+ continue;
+ }
+
+ DEBUG ((EFI_D_INFO, "[%a] channel [%a] [%a] device\n",
+ (IdeChannel == 1) ? "secondary" : "primary ", (IdeDevice == 1) ? "slave " : "master",
+ DeviceType == EfiIdeCdrom ? "cdrom " : "harddisk"));
+ //
+ // If the device is a hard disk, then try to enable S.M.A.R.T feature
+ //
+ if ((DeviceType == EfiIdeHarddisk) && PcdGetBool (PcdAtaSmartEnable)) {
+ IdeAtaSmartSupport (
+ Instance,
+ IdeChannel,
+ IdeDevice,
+ &Buffer,
+ NULL
+ );
+ }
+
+ //
+ // Submit identify data to IDE controller init driver
+ //
+ IdeInit->SubmitData (IdeInit, IdeChannel, IdeDevice, &Buffer);
+
+ //
+ // Now start to config ide device parameter and transfer mode.
+ //
+ Status = IdeInit->CalculateMode (
+ IdeInit,
+ IdeChannel,
+ IdeDevice,
+ &SupportedModes
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Calculate Mode Fail, Status = %r\n", Status));
+ continue;
+ }
+
+ //
+ // Set best supported PIO mode on this IDE device
+ //
+ if (SupportedModes->PioMode.Mode <= EfiAtaPioMode2) {
+ TransferMode.ModeCategory = EFI_ATA_MODE_DEFAULT_PIO;
+ } else {
+ TransferMode.ModeCategory = EFI_ATA_MODE_FLOW_PIO;
+ }
+
+ TransferMode.ModeNumber = (UINT8) (SupportedModes->PioMode.Mode);
+
+ if (SupportedModes->ExtModeCount == 0){
+ Status = SetDeviceTransferMode (Instance, IdeChannel, IdeDevice, &TransferMode, NULL);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Set transfer Mode Fail, Status = %r\n", Status));
+ continue;
+ }
+ }
+
+ //
+ // Set supported DMA mode on this IDE device. Note that UDMA & MDMA cann't
+ // be set together. Only one DMA mode can be set to a device. If setting
+ // DMA mode operation fails, we can continue moving on because we only use
+ // PIO mode at boot time. DMA modes are used by certain kind of OS booting
+ //
+ if (SupportedModes->UdmaMode.Valid) {
+ TransferMode.ModeCategory = EFI_ATA_MODE_UDMA;
+ TransferMode.ModeNumber = (UINT8) (SupportedModes->UdmaMode.Mode);
+ Status = SetDeviceTransferMode (Instance, IdeChannel, IdeDevice, &TransferMode, NULL);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Set transfer Mode Fail, Status = %r\n", Status));
+ continue;
+ }
+ } else if (SupportedModes->MultiWordDmaMode.Valid) {
+ TransferMode.ModeCategory = EFI_ATA_MODE_MDMA;
+ TransferMode.ModeNumber = (UINT8) SupportedModes->MultiWordDmaMode.Mode;
+ Status = SetDeviceTransferMode (Instance, IdeChannel, IdeDevice, &TransferMode, NULL);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Set transfer Mode Fail, Status = %r\n", Status));
+ continue;
+ }
+ }
+
+ //
+ // Set Parameters for the device:
+ // 1) Init
+ // 2) Establish the block count for READ/WRITE MULTIPLE (EXT) command
+ //
+ if (DeviceType == EfiIdeHarddisk) {
+ //
+ // Init driver parameters
+ //
+ DriveParameters.Sector = (UINT8) ((ATA5_IDENTIFY_DATA *)(&Buffer.AtaData))->sectors_per_track;
+ DriveParameters.Heads = (UINT8) (((ATA5_IDENTIFY_DATA *)(&Buffer.AtaData))->heads - 1);
+ DriveParameters.MultipleSector = (UINT8) ((ATA5_IDENTIFY_DATA *)(&Buffer.AtaData))->multi_sector_cmd_max_sct_cnt;
+
+ Status = SetDriveParameters (Instance, IdeChannel, IdeDevice, &DriveParameters, NULL);
+ }
+
+ //
+ // Set IDE controller Timing Blocks in the PCI Configuration Space
+ //
+ IdeInit->SetTiming (IdeInit, IdeChannel, IdeDevice, SupportedModes);
+
+ //
+ // IDE controller and IDE device timing is configured successfully.
+ // Now insert the device into device list.
+ //
+ Status = CreateNewDeviceInfo (Instance, IdeChannel, IdeDevice, DeviceType, &Buffer);
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+
+ if (DeviceType == EfiIdeHarddisk) {
+ REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_PC_ENABLE));
+ }
+ }
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Initialize ATA host controller at IDE mode.
+
+ The function is designed to initialize ATA host controller.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+
+**/
+EFI_STATUS
+EFIAPI
+IdeModeInitialization (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
+ )
+{
+ EFI_STATUS Status;
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ UINT8 Channel;
+ UINT8 IdeChannel;
+ BOOLEAN ChannelEnabled;
+ UINT8 MaxDevices;
+
+ IdeInit = Instance->IdeControllerInit;
+ PciIo = Instance->PciIo;
+ Channel = IdeInit->ChannelCount;
+
+ //
+ // Obtain IDE IO port registers' base addresses
+ //
+ Status = GetIdeRegisterIoAddr (PciIo, Instance->IdeRegisters);
+ if (EFI_ERROR (Status)) {
+ goto ErrorExit;
+ }
+
+ for (IdeChannel = 0; IdeChannel < Channel; IdeChannel++) {
+ IdeInit->NotifyPhase (IdeInit, EfiIdeBeforeChannelEnumeration, IdeChannel);
+
+ //
+ // now obtain channel information fron IdeControllerInit protocol.
+ //
+ Status = IdeInit->GetChannelInfo (
+ IdeInit,
+ IdeChannel,
+ &ChannelEnabled,
+ &MaxDevices
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "[GetChannel, Status=%x]", Status));
+ continue;
+ }
+
+ if (!ChannelEnabled) {
+ continue;
+ }
+
+ ASSERT (MaxDevices <= 2);
+ //
+ // Now inform the IDE Controller Init Module.
+ //
+ IdeInit->NotifyPhase (IdeInit, EfiIdeBeforeChannelReset, IdeChannel);
+
+ //
+ // No reset channel function implemented.
+ //
+ IdeInit->NotifyPhase (IdeInit, EfiIdeAfterChannelReset, IdeChannel);
+
+ //
+ // Now inform the IDE Controller Init Module.
+ //
+ IdeInit->NotifyPhase (IdeInit, EfiIdeBusBeforeDevicePresenceDetection, IdeChannel);
+
+ //
+ // Detect all attached ATA devices and set the transfer mode for each device.
+ //
+ DetectAndConfigIdeDevice (Instance, IdeChannel);
+ }
+
+ //
+ // All configurations done! Notify IdeController to do post initialization
+ // work such as saving IDE controller PCI settings for S3 resume
+ //
+ IdeInit->NotifyPhase (IdeInit, EfiIdeBusPhaseMaximum, 0);
+
+ErrorExit:
+ return Status;
+}
+
diff --git a/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.h b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.h new file mode 100644 index 0000000000..67fff64658 --- /dev/null +++ b/Core/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.h @@ -0,0 +1,204 @@ +/** @file
+ Header file for IDE mode of ATA host controller.
+
+ Copyright (c) 2010 - 2011, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#ifndef __ATA_HC_IDE_MODE_H__
+#define __ATA_HC_IDE_MODE_H__
+
+typedef enum {
+ EfiIdePrimary = 0,
+ EfiIdeSecondary = 1,
+ EfiIdeMaxChannel = 2
+} EFI_IDE_CHANNEL;
+
+typedef enum {
+ EfiIdeMaster = 0,
+ EfiIdeSlave = 1,
+ EfiIdeMaxDevice = 2
+} EFI_IDE_DEVICE;
+
+///
+/// PIO mode definition
+///
+typedef enum {
+ EfiAtaPioModeBelow2,
+ EfiAtaPioMode2,
+ EfiAtaPioMode3,
+ EfiAtaPioMode4
+} EFI_ATA_PIO_MODE;
+
+//
+// Multi word DMA definition
+//
+typedef enum {
+ EfiAtaMdmaMode0,
+ EfiAtaMdmaMode1,
+ EfiAtaMdmaMode2
+} EFI_ATA_MDMA_MODE;
+
+//
+// UDMA mode definition
+//
+typedef enum {
+ EfiAtaUdmaMode0,
+ EfiAtaUdmaMode1,
+ EfiAtaUdmaMode2,
+ EfiAtaUdmaMode3,
+ EfiAtaUdmaMode4,
+ EfiAtaUdmaMode5
+} EFI_ATA_UDMA_MODE;
+
+//
+// Bus Master Reg
+//
+#define BMIC_NREAD BIT3
+#define BMIC_START BIT0
+#define BMIS_INTERRUPT BIT2
+#define BMIS_ERROR BIT1
+
+#define BMIC_OFFSET 0x00
+#define BMIS_OFFSET 0x02
+#define BMID_OFFSET 0x04
+
+//
+// IDE transfer mode
+//
+#define EFI_ATA_MODE_DEFAULT_PIO 0x00
+#define EFI_ATA_MODE_FLOW_PIO 0x01
+#define EFI_ATA_MODE_MDMA 0x04
+#define EFI_ATA_MODE_UDMA 0x08
+
+typedef struct {
+ UINT32 RegionBaseAddr;
+ UINT16 ByteCount;
+ UINT16 EndOfTable;
+} EFI_ATA_DMA_PRD;
+
+typedef struct {
+ UINT8 ModeNumber : 3;
+ UINT8 ModeCategory : 5;
+} EFI_ATA_TRANSFER_MODE;
+
+typedef struct {
+ UINT8 Sector;
+ UINT8 Heads;
+ UINT8 MultipleSector;
+} EFI_ATA_DRIVE_PARMS;
+
+//
+// IDE registers set
+//
+typedef struct {
+ UINT16 Data;
+ UINT16 ErrOrFeature;
+ UINT16 SectorCount;
+ UINT16 SectorNumber;
+ UINT16 CylinderLsb;
+ UINT16 CylinderMsb;
+ UINT16 Head;
+ UINT16 CmdOrStatus;
+ UINT16 AltOrDev;
+
+ UINT16 BusMasterBaseAddr;
+} EFI_IDE_REGISTERS;
+
+//
+// Bit definitions in Programming Interface byte of the Class Code field
+// in PCI IDE controller's Configuration Space
+//
+#define IDE_PRIMARY_OPERATING_MODE BIT0
+#define IDE_PRIMARY_PROGRAMMABLE_INDICATOR BIT1
+#define IDE_SECONDARY_OPERATING_MODE BIT2
+#define IDE_SECONDARY_PROGRAMMABLE_INDICATOR BIT3
+
+/**
+ Get IDE i/o port registers' base addresses by mode.
+
+ In 'Compatibility' mode, use fixed addresses.
+ In Native-PCI mode, get base addresses from BARs in the PCI IDE controller's
+ Configuration Space.
+
+ The steps to get IDE i/o port registers' base addresses for each channel
+ as follows:
+
+ 1. Examine the Programming Interface byte of the Class Code fields in PCI IDE
+ controller's Configuration Space to determine the operating mode.
+
+ 2. a) In 'Compatibility' mode, use fixed addresses shown in the Table 1 below.
+ ___________________________________________
+ | | Command Block | Control Block |
+ | Channel | Registers | Registers |
+ |___________|_______________|_______________|
+ | Primary | 1F0h - 1F7h | 3F6h - 3F7h |
+ |___________|_______________|_______________|
+ | Secondary | 170h - 177h | 376h - 377h |
+ |___________|_______________|_______________|
+
+ Table 1. Compatibility resource mappings
+
+ b) In Native-PCI mode, IDE registers are mapped into IO space using the BARs
+ in IDE controller's PCI Configuration Space, shown in the Table 2 below.
+ ___________________________________________________
+ | | Command Block | Control Block |
+ | Channel | Registers | Registers |
+ |___________|___________________|___________________|
+ | Primary | BAR at offset 0x10| BAR at offset 0x14|
+ |___________|___________________|___________________|
+ | Secondary | BAR at offset 0x18| BAR at offset 0x1C|
+ |___________|___________________|___________________|
+
+ Table 2. BARs for Register Mapping
+
+ @param[in] PciIo Pointer to the EFI_PCI_IO_PROTOCOL instance
+ @param[in, out] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to
+ store the IDE i/o port registers' base addresses
+
+ @retval EFI_UNSUPPORTED Return this value when the BARs is not IO type
+ @retval EFI_SUCCESS Get the Base address successfully
+ @retval Other Read the pci configureation data error
+
+**/
+EFI_STATUS
+EFIAPI
+GetIdeRegisterIoAddr (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN OUT EFI_IDE_REGISTERS *IdeRegisters
+ );
+
+/**
+ This function is used to send out ATAPI commands conforms to the Packet Command
+ with PIO Data In Protocol.
+
+ @param[in] PciIo Pointer to the EFI_PCI_IO_PROTOCOL instance
+ @param[in] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to
+ store the IDE i/o port registers' base addresses
+ @param[in] Channel The channel number of device.
+ @param[in] Device The device number of device.
+ @param[in] Packet A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET data structure.
+
+ @retval EFI_SUCCESS send out the ATAPI packet command successfully
+ and device sends data successfully.
+ @retval EFI_DEVICE_ERROR the device failed to send data.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPacketCommandExecute (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ IN EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet
+ );
+
+#endif
+
|