diff options
Diffstat (limited to 'Core/MdeModulePkg/Bus/Pci/UhciPei')
| -rw-r--r-- | Core/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c | 3219 | ||||
| -rw-r--r-- | Core/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h | 1333 | ||||
| -rw-r--r-- | Core/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.inf | 64 | ||||
| -rw-r--r-- | Core/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.uni | bin | 0 -> 2246 bytes | |||
| -rw-r--r-- | Core/MdeModulePkg/Bus/Pci/UhciPei/UhciPeiExtra.uni | bin | 0 -> 1362 bytes |
5 files changed, 4616 insertions, 0 deletions
diff --git a/Core/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c b/Core/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c new file mode 100644 index 0000000000..368b75d753 --- /dev/null +++ b/Core/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c @@ -0,0 +1,3219 @@ +/** @file
+PEIM to produce gPeiUsbHostControllerPpiGuid based on gPeiUsbControllerPpiGuid
+which is used to enable recovery function from USB Drivers.
+
+Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved. <BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "UhcPeim.h"
+
+/**
+ Initializes Usb Host Controller.
+
+ @param FileHandle Handle of the file being invoked.
+ @param PeiServices Describes the list of possible PEI Services.
+
+ @retval EFI_SUCCESS PPI successfully installed.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcPeimEntry (
+ IN EFI_PEI_FILE_HANDLE FileHandle,
+ IN CONST EFI_PEI_SERVICES **PeiServices
+ )
+{
+ PEI_USB_CONTROLLER_PPI *ChipSetUsbControllerPpi;
+ EFI_STATUS Status;
+ UINT8 Index;
+ UINTN ControllerType;
+ UINTN BaseAddress;
+ UINTN MemPages;
+ USB_UHC_DEV *UhcDev;
+ EFI_PHYSICAL_ADDRESS TempPtr;
+
+ //
+ // Shadow this PEIM to run from memory
+ //
+ if (!EFI_ERROR (PeiServicesRegisterForShadow (FileHandle))) {
+ return EFI_SUCCESS;
+ }
+
+ Status = PeiServicesLocatePpi (
+ &gPeiUsbControllerPpiGuid,
+ 0,
+ NULL,
+ (VOID **) &ChipSetUsbControllerPpi
+ );
+ //
+ // If failed to locate, it is a bug in dispather as depex has gPeiUsbControllerPpiGuid.
+ //
+ ASSERT_EFI_ERROR (Status);
+
+ Index = 0;
+ while (TRUE) {
+ Status = ChipSetUsbControllerPpi->GetUsbController (
+ (EFI_PEI_SERVICES **) PeiServices,
+ ChipSetUsbControllerPpi,
+ Index,
+ &ControllerType,
+ &BaseAddress
+ );
+ //
+ // When status is error, meant no controller is found
+ //
+ if (EFI_ERROR (Status)) {
+ break;
+ }
+
+ //
+ // This PEIM is for UHC type controller.
+ //
+ if (ControllerType != PEI_UHCI_CONTROLLER) {
+ Index++;
+ continue;
+ }
+
+ MemPages = sizeof (USB_UHC_DEV) / EFI_PAGE_SIZE + 1;
+
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesData,
+ MemPages,
+ &TempPtr
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ UhcDev = (USB_UHC_DEV *) ((UINTN) TempPtr);
+ UhcDev->Signature = USB_UHC_DEV_SIGNATURE;
+ UhcDev->UsbHostControllerBaseAddress = (UINT32) BaseAddress;
+
+ //
+ // Init local memory management service
+ //
+ Status = InitializeMemoryManagement (UhcDev);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Initialize Uhc's hardware
+ //
+ Status = InitializeUsbHC (UhcDev);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ UhcDev->UsbHostControllerPpi.ControlTransfer = UhcControlTransfer;
+ UhcDev->UsbHostControllerPpi.BulkTransfer = UhcBulkTransfer;
+ UhcDev->UsbHostControllerPpi.GetRootHubPortNumber = UhcGetRootHubPortNumber;
+ UhcDev->UsbHostControllerPpi.GetRootHubPortStatus = UhcGetRootHubPortStatus;
+ UhcDev->UsbHostControllerPpi.SetRootHubPortFeature = UhcSetRootHubPortFeature;
+ UhcDev->UsbHostControllerPpi.ClearRootHubPortFeature = UhcClearRootHubPortFeature;
+
+ UhcDev->PpiDescriptor.Flags = (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST);
+ UhcDev->PpiDescriptor.Guid = &gPeiUsbHostControllerPpiGuid;
+ UhcDev->PpiDescriptor.Ppi = &UhcDev->UsbHostControllerPpi;
+
+ Status = PeiServicesInstallPpi (&UhcDev->PpiDescriptor);
+ if (EFI_ERROR (Status)) {
+ Index++;
+ continue;
+ }
+
+ Index++;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Submits control transfer to a target USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param DeviceAddress The target device address.
+ @param DeviceSpeed Target device speed.
+ @param MaximumPacketLength Maximum packet size the default control transfer
+ endpoint is capable of sending or receiving.
+ @param Request USB device request to send.
+ @param TransferDirection Specifies the data direction for the data stage.
+ @param Data Data buffer to be transmitted or received from USB device.
+ @param DataLength The size (in bytes) of the data buffer.
+ @param TimeOut Indicates the maximum timeout, in millisecond.
+ If Timeout is 0, then the caller must wait for the function
+ to be completed until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.
+ @param TransferResult Return the result of this control transfer.
+
+ @retval EFI_SUCCESS Transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resources.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_TIMEOUT Transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR Transfer failed due to host controller or device error.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcControlTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINT8 MaximumPacketLength,
+ IN EFI_USB_DEVICE_REQUEST *Request,
+ IN EFI_USB_DATA_DIRECTION TransferDirection,
+ IN OUT VOID *Data OPTIONAL,
+ IN OUT UINTN *DataLength OPTIONAL,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ )
+{
+ USB_UHC_DEV *UhcDev;
+ UINT32 StatusReg;
+ UINT8 PktID;
+ QH_STRUCT *PtrQH;
+ TD_STRUCT *PtrTD;
+ TD_STRUCT *PtrPreTD;
+ TD_STRUCT *PtrSetupTD;
+ TD_STRUCT *PtrStatusTD;
+ EFI_STATUS Status;
+ UINT32 DataLen;
+ UINT8 *PtrDataSource;
+ UINT8 *Ptr;
+ UINT8 DataToggle;
+
+ UhcDev = PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS (This);
+
+ StatusReg = UhcDev->UsbHostControllerBaseAddress + USBSTS;
+
+ PktID = INPUT_PACKET_ID;
+
+ if (Request == NULL || TransferResult == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ //
+ // if errors exist that cause host controller halt,
+ // then return EFI_DEVICE_ERROR.
+ //
+
+ if (!IsStatusOK (UhcDev, StatusReg)) {
+ ClearStatusReg (UhcDev, StatusReg);
+ *TransferResult = EFI_USB_ERR_SYSTEM;
+ return EFI_DEVICE_ERROR;
+ }
+
+ ClearStatusReg (UhcDev, StatusReg);
+
+ //
+ // generate Setup Stage TD
+ //
+
+ PtrQH = UhcDev->ConfigQH;
+
+ GenSetupStageTD (
+ UhcDev,
+ DeviceAddress,
+ 0,
+ DeviceSpeed,
+ (UINT8 *) Request,
+ (UINT8) sizeof (EFI_USB_DEVICE_REQUEST),
+ &PtrSetupTD
+ );
+
+ //
+ // link setup TD structures to QH structure
+ //
+ LinkTDToQH (PtrQH, PtrSetupTD);
+
+ PtrPreTD = PtrSetupTD;
+
+ //
+ // Data Stage of Control Transfer
+ //
+ switch (TransferDirection) {
+
+ case EfiUsbDataIn:
+ PktID = INPUT_PACKET_ID;
+ PtrDataSource = Data;
+ DataLen = (UINT32) *DataLength;
+ Ptr = PtrDataSource;
+ break;
+
+ case EfiUsbDataOut:
+ PktID = OUTPUT_PACKET_ID;
+ PtrDataSource = Data;
+ DataLen = (UINT32) *DataLength;
+ Ptr = PtrDataSource;
+ break;
+
+ //
+ // no data stage
+ //
+ case EfiUsbNoData:
+ if (*DataLength != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ PktID = OUTPUT_PACKET_ID;
+ PtrDataSource = NULL;
+ DataLen = 0;
+ Ptr = NULL;
+ break;
+
+ default:
+ return EFI_INVALID_PARAMETER;
+ }
+
+ DataToggle = 1;
+
+ PtrTD = PtrSetupTD;
+ while (DataLen > 0) {
+ //
+ // create TD structures and link together
+ //
+ UINT8 PacketSize;
+
+ //
+ // PacketSize is the data load size of each TD carries.
+ //
+ PacketSize = (UINT8) DataLen;
+ if (DataLen > MaximumPacketLength) {
+ PacketSize = MaximumPacketLength;
+ }
+
+ GenDataTD (
+ UhcDev,
+ DeviceAddress,
+ 0,
+ Ptr,
+ PacketSize,
+ PktID,
+ DataToggle,
+ DeviceSpeed,
+ &PtrTD
+ );
+
+ //
+ // Link two TDs in vertical depth
+ //
+ LinkTDToTD (PtrPreTD, PtrTD);
+ PtrPreTD = PtrTD;
+
+ DataToggle ^= 1;
+ Ptr += PacketSize;
+ DataLen -= PacketSize;
+ }
+
+ //
+ // PtrPreTD points to the last TD before the Setup-Stage TD.
+ //
+ PtrPreTD = PtrTD;
+
+ //
+ // Status Stage of Control Transfer
+ //
+ if (PktID == OUTPUT_PACKET_ID) {
+ PktID = INPUT_PACKET_ID;
+ } else {
+ PktID = OUTPUT_PACKET_ID;
+ }
+ //
+ // create Status Stage TD structure
+ //
+ CreateStatusTD (
+ UhcDev,
+ DeviceAddress,
+ 0,
+ PktID,
+ DeviceSpeed,
+ &PtrStatusTD
+ );
+
+ LinkTDToTD (PtrPreTD, PtrStatusTD);
+
+ //
+ // Poll QH-TDs execution and get result.
+ // detail status is returned
+ //
+ Status = ExecuteControlTransfer (
+ UhcDev,
+ PtrSetupTD,
+ DataLength,
+ TimeOut,
+ TransferResult
+ );
+
+ //
+ // TRUE means must search other framelistindex
+ //
+ SetQHVerticalValidorInvalid(PtrQH, FALSE);
+ DeleteQueuedTDs (UhcDev, PtrSetupTD);
+
+ //
+ // if has errors that cause host controller halt, then return EFI_DEVICE_ERROR directly.
+ //
+ if (!IsStatusOK (UhcDev, StatusReg)) {
+
+ ClearStatusReg (UhcDev, StatusReg);
+ *TransferResult |= EFI_USB_ERR_SYSTEM;
+ return EFI_DEVICE_ERROR;
+ }
+
+ ClearStatusReg (UhcDev, StatusReg);
+
+ return Status;
+}
+
+/**
+ Submits bulk transfer to a bulk endpoint of a USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param DeviceAddress Target device address.
+ @param EndPointAddress Endpoint number and its direction in bit 7.
+ @param MaximumPacketLength Maximum packet size the endpoint is capable of
+ sending or receiving.
+ @param Data Array of pointers to the buffers of data to transmit
+ from or receive into.
+ @param DataLength The lenght of the data buffer.
+ @param DataToggle On input, the initial data toggle for the transfer;
+ On output, it is updated to to next data toggle to use of
+ the subsequent bulk transfer.
+ @param TimeOut Indicates the maximum time, in millisecond, which the
+ transfer is allowed to complete.
+ If Timeout is 0, then the caller must wait for the function
+ to be completed until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.
+ @param TransferResult A pointer to the detailed result information of the
+ bulk transfer.
+
+ @retval EFI_SUCCESS The transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource.
+ @retval EFI_INVALID_PARAMETER Parameters are invalid.
+ @retval EFI_TIMEOUT The transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR The transfer failed due to host controller error.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcBulkTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 MaximumPacketLength,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN OUT UINT8 *DataToggle,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ )
+{
+ USB_UHC_DEV *UhcDev;
+ UINT32 StatusReg;
+
+ UINT32 DataLen;
+
+ QH_STRUCT *PtrQH;
+ TD_STRUCT *PtrFirstTD;
+ TD_STRUCT *PtrTD;
+ TD_STRUCT *PtrPreTD;
+
+ UINT8 PktID;
+ UINT8 *PtrDataSource;
+ UINT8 *Ptr;
+
+ BOOLEAN IsFirstTD;
+
+ EFI_STATUS Status;
+
+ EFI_USB_DATA_DIRECTION TransferDirection;
+
+ BOOLEAN ShortPacketEnable;
+
+ UINT16 CommandContent;
+
+ UhcDev = PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS (This);
+
+ //
+ // Enable the maximum packet size (64bytes)
+ // that can be used for full speed bandwidth reclamation
+ // at the end of a frame.
+ //
+ CommandContent = USBReadPortW (UhcDev, UhcDev->UsbHostControllerBaseAddress + USBCMD);
+ if ((CommandContent & USBCMD_MAXP) != USBCMD_MAXP) {
+ CommandContent |= USBCMD_MAXP;
+ USBWritePortW (UhcDev, UhcDev->UsbHostControllerBaseAddress + USBCMD, CommandContent);
+ }
+
+ StatusReg = UhcDev->UsbHostControllerBaseAddress + USBSTS;
+
+ //
+ // these code lines are added here per complier's strict demand
+ //
+ PktID = INPUT_PACKET_ID;
+ PtrTD = NULL;
+ PtrFirstTD = NULL;
+ PtrPreTD = NULL;
+ DataLen = 0;
+ Ptr = NULL;
+
+ ShortPacketEnable = FALSE;
+
+ if ((DataLength == 0) || (Data == NULL) || (TransferResult == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((*DataToggle != 1) && (*DataToggle != 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (MaximumPacketLength != 8 && MaximumPacketLength != 16
+ && MaximumPacketLength != 32 && MaximumPacketLength != 64) {
+ return EFI_INVALID_PARAMETER;
+ }
+ //
+ // if has errors that cause host controller halt, then return EFI_DEVICE_ERROR directly.
+ //
+ if (!IsStatusOK (UhcDev, StatusReg)) {
+
+ ClearStatusReg (UhcDev, StatusReg);
+ *TransferResult = EFI_USB_ERR_SYSTEM;
+ return EFI_DEVICE_ERROR;
+ }
+
+ ClearStatusReg (UhcDev, StatusReg);
+
+ if ((EndPointAddress & 0x80) != 0) {
+ TransferDirection = EfiUsbDataIn;
+ } else {
+ TransferDirection = EfiUsbDataOut;
+ }
+
+ switch (TransferDirection) {
+
+ case EfiUsbDataIn:
+ ShortPacketEnable = TRUE;
+ PktID = INPUT_PACKET_ID;
+ PtrDataSource = Data;
+ DataLen = (UINT32) *DataLength;
+ Ptr = PtrDataSource;
+ break;
+
+ case EfiUsbDataOut:
+ PktID = OUTPUT_PACKET_ID;
+ PtrDataSource = Data;
+ DataLen = (UINT32) *DataLength;
+ Ptr = PtrDataSource;
+ break;
+
+ default:
+ break;
+ }
+
+ PtrQH = UhcDev->BulkQH;
+
+ IsFirstTD = TRUE;
+ while (DataLen > 0) {
+ //
+ // create TD structures and link together
+ //
+ UINT8 PacketSize;
+
+ PacketSize = (UINT8) DataLen;
+ if (DataLen > MaximumPacketLength) {
+ PacketSize = MaximumPacketLength;
+ }
+
+ GenDataTD (
+ UhcDev,
+ DeviceAddress,
+ EndPointAddress,
+ Ptr,
+ PacketSize,
+ PktID,
+ *DataToggle,
+ USB_FULL_SPEED_DEVICE,
+ &PtrTD
+ );
+
+ //
+ // Enable short packet detection.
+ // (default action is disabling short packet detection)
+ //
+ if (ShortPacketEnable) {
+ EnableorDisableTDShortPacket (PtrTD, TRUE);
+ }
+
+ if (IsFirstTD) {
+ PtrFirstTD = PtrTD;
+ PtrFirstTD->PtrNextTD = NULL;
+ IsFirstTD = FALSE;
+ } else {
+ //
+ // Link two TDs in vertical depth
+ //
+ LinkTDToTD (PtrPreTD, PtrTD);
+ }
+
+ PtrPreTD = PtrTD;
+
+ *DataToggle ^= 1;
+ Ptr += PacketSize;
+ DataLen -= PacketSize;
+ }
+ //
+ // link TD structures to QH structure
+ //
+ LinkTDToQH (PtrQH, PtrFirstTD);
+
+ //
+ // Execute QH-TD and get result
+ //
+ //
+ // detail status is put into the Result field in the pIRP
+ // the Data Toggle value is also re-updated to the value
+ // of the last successful TD
+ //
+ Status = ExecBulkTransfer (
+ UhcDev,
+ PtrFirstTD,
+ DataLength,
+ DataToggle,
+ TimeOut,
+ TransferResult
+ );
+
+ //
+ // Delete Bulk transfer TD structure
+ //
+ DeleteQueuedTDs (UhcDev, PtrFirstTD);
+
+ //
+ // if has errors that cause host controller halt, then return EFI_DEVICE_ERROR directly.
+ //
+ if (!IsStatusOK (UhcDev, StatusReg)) {
+
+ ClearStatusReg (UhcDev, StatusReg);
+ *TransferResult |= EFI_USB_ERR_SYSTEM;
+ return EFI_DEVICE_ERROR;
+ }
+
+ ClearStatusReg (UhcDev, StatusReg);
+
+ return Status;
+}
+
+/**
+ Retrieves the number of root hub ports.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB_HOST_CONTROLLER_PPI.
+ @param[out] PortNumber The pointer to the number of the root hub ports.
+
+ @retval EFI_SUCCESS The port number was retrieved successfully.
+ @retval EFI_INVALID_PARAMETER PortNumber is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcGetRootHubPortNumber (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ OUT UINT8 *PortNumber
+ )
+{
+ USB_UHC_DEV *UhcDev;
+ UINT32 PSAddr;
+ UINT16 RHPortControl;
+ UINT32 Index;
+
+ UhcDev = PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS (This);
+
+ if (PortNumber == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *PortNumber = 0;
+
+ for (Index = 0; Index < 2; Index++) {
+ PSAddr = UhcDev->UsbHostControllerBaseAddress + USBPORTSC1 + Index * 2;
+ RHPortControl = USBReadPortW (UhcDev, PSAddr);
+ //
+ // Port Register content is valid
+ //
+ if (RHPortControl != 0xff) {
+ (*PortNumber)++;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Retrieves the current status of a USB root hub port.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param PortNumber The root hub port to retrieve the state from.
+ @param PortStatus Variable to receive the port state.
+
+ @retval EFI_SUCCESS The status of the USB root hub port specified.
+ by PortNumber was returned in PortStatus.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcGetRootHubPortStatus (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ OUT EFI_USB_PORT_STATUS *PortStatus
+ )
+{
+ USB_UHC_DEV *UhcDev;
+ UINT32 PSAddr;
+ UINT16 RHPortStatus;
+ UINT8 TotalPortNumber;
+
+ if (PortStatus == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ UhcGetRootHubPortNumber (PeiServices, This, &TotalPortNumber);
+ if (PortNumber > TotalPortNumber) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ UhcDev = PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS (This);
+ PSAddr = UhcDev->UsbHostControllerBaseAddress + USBPORTSC1 + PortNumber * 2;
+
+ PortStatus->PortStatus = 0;
+ PortStatus->PortChangeStatus = 0;
+
+ RHPortStatus = USBReadPortW (UhcDev, PSAddr);
+
+ //
+ // Current Connect Status
+ //
+ if ((RHPortStatus & USBPORTSC_CCS) != 0) {
+ PortStatus->PortStatus |= USB_PORT_STAT_CONNECTION;
+ }
+ //
+ // Port Enabled/Disabled
+ //
+ if ((RHPortStatus & USBPORTSC_PED) != 0) {
+ PortStatus->PortStatus |= USB_PORT_STAT_ENABLE;
+ }
+ //
+ // Port Suspend
+ //
+ if ((RHPortStatus & USBPORTSC_SUSP) != 0) {
+ PortStatus->PortStatus |= USB_PORT_STAT_SUSPEND;
+ }
+ //
+ // Port Reset
+ //
+ if ((RHPortStatus & USBPORTSC_PR) != 0) {
+ PortStatus->PortStatus |= USB_PORT_STAT_RESET;
+ }
+ //
+ // Low Speed Device Attached
+ //
+ if ((RHPortStatus & USBPORTSC_LSDA) != 0) {
+ PortStatus->PortStatus |= USB_PORT_STAT_LOW_SPEED;
+ }
+ //
+ // Fill Port Status Change bits
+ //
+ //
+ // Connect Status Change
+ //
+ if ((RHPortStatus & USBPORTSC_CSC) != 0) {
+ PortStatus->PortChangeStatus |= USB_PORT_STAT_C_CONNECTION;
+ }
+ //
+ // Port Enabled/Disabled Change
+ //
+ if ((RHPortStatus & USBPORTSC_PEDC) != 0) {
+ PortStatus->PortChangeStatus |= USB_PORT_STAT_C_ENABLE;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Sets a feature for the specified root hub port.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI
+ @param PortNumber Root hub port to set.
+ @param PortFeature Feature to set.
+
+ @retval EFI_SUCCESS The feature specified by PortFeature was set.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+ @retval EFI_TIMEOUT The time out occurred.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcSetRootHubPortFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ )
+{
+ USB_UHC_DEV *UhcDev;
+ UINT32 PSAddr;
+ UINT32 CommandRegAddr;
+ UINT16 RHPortControl;
+ UINT8 TotalPortNumber;
+
+ UhcGetRootHubPortNumber (PeiServices, This, &TotalPortNumber);
+ if (PortNumber > TotalPortNumber) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ UhcDev = PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS (This);
+ PSAddr = UhcDev->UsbHostControllerBaseAddress + USBPORTSC1 + PortNumber * 2;
+ CommandRegAddr = UhcDev->UsbHostControllerBaseAddress + USBCMD;
+
+ RHPortControl = USBReadPortW (UhcDev, PSAddr);
+
+ switch (PortFeature) {
+
+ case EfiUsbPortSuspend:
+ if ((USBReadPortW (UhcDev, CommandRegAddr) & USBCMD_EGSM) == 0) {
+ //
+ // if global suspend is not active, can set port suspend
+ //
+ RHPortControl &= 0xfff5;
+ RHPortControl |= USBPORTSC_SUSP;
+ }
+ break;
+
+ case EfiUsbPortReset:
+ RHPortControl &= 0xfff5;
+ RHPortControl |= USBPORTSC_PR;
+ //
+ // Set the reset bit
+ //
+ break;
+
+ case EfiUsbPortPower:
+ break;
+
+ case EfiUsbPortEnable:
+ RHPortControl &= 0xfff5;
+ RHPortControl |= USBPORTSC_PED;
+ break;
+
+ default:
+ return EFI_INVALID_PARAMETER;
+ }
+
+ USBWritePortW (UhcDev, PSAddr, RHPortControl);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Clears a feature for the specified root hub port.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param PortNumber Specifies the root hub port whose feature
+ is requested to be cleared.
+ @param PortFeature Indicates the feature selector associated with the
+ feature clear request.
+
+ @retval EFI_SUCCESS The feature specified by PortFeature was cleared
+ for the USB root hub port specified by PortNumber.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcClearRootHubPortFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ )
+{
+ USB_UHC_DEV *UhcDev;
+ UINT32 PSAddr;
+ UINT16 RHPortControl;
+ UINT8 TotalPortNumber;
+
+ UhcGetRootHubPortNumber (PeiServices, This, &TotalPortNumber);
+
+ if (PortNumber > TotalPortNumber) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ UhcDev = PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS (This);
+ PSAddr = UhcDev->UsbHostControllerBaseAddress + USBPORTSC1 + PortNumber * 2;
+
+ RHPortControl = USBReadPortW (UhcDev, PSAddr);
+
+ switch (PortFeature) {
+ //
+ // clear PORT_ENABLE feature means disable port.
+ //
+ case EfiUsbPortEnable:
+ RHPortControl &= 0xfff5;
+ RHPortControl &= ~USBPORTSC_PED;
+ break;
+
+ //
+ // clear PORT_SUSPEND feature means resume the port.
+ // (cause a resume on the specified port if in suspend mode)
+ //
+ case EfiUsbPortSuspend:
+ RHPortControl &= 0xfff5;
+ RHPortControl &= ~USBPORTSC_SUSP;
+ break;
+
+ //
+ // no operation
+ //
+ case EfiUsbPortPower:
+ break;
+
+ //
+ // clear PORT_RESET means clear the reset signal.
+ //
+ case EfiUsbPortReset:
+ RHPortControl &= 0xfff5;
+ RHPortControl &= ~USBPORTSC_PR;
+ break;
+
+ //
+ // clear connect status change
+ //
+ case EfiUsbPortConnectChange:
+ RHPortControl &= 0xfff5;
+ RHPortControl |= USBPORTSC_CSC;
+ break;
+
+ //
+ // clear enable/disable status change
+ //
+ case EfiUsbPortEnableChange:
+ RHPortControl &= 0xfff5;
+ RHPortControl |= USBPORTSC_PEDC;
+ break;
+
+ //
+ // root hub does not support this request
+ //
+ case EfiUsbPortSuspendChange:
+ break;
+
+ //
+ // root hub does not support this request
+ //
+ case EfiUsbPortOverCurrentChange:
+ break;
+
+ //
+ // root hub does not support this request
+ //
+ case EfiUsbPortResetChange:
+ break;
+
+ default:
+ return EFI_INVALID_PARAMETER;
+ }
+
+ USBWritePortW (UhcDev, PSAddr, RHPortControl);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Initialize UHCI.
+
+ @param UhcDev UHCI Device.
+
+ @retval EFI_SUCCESS UHCI successfully initialized.
+ @retval EFI_OUT_OF_RESOURCES Resource can not be allocated.
+
+**/
+EFI_STATUS
+InitializeUsbHC (
+ IN USB_UHC_DEV *UhcDev
+ )
+{
+ EFI_STATUS Status;
+ UINT32 FrameListBaseAddrReg;
+ UINT32 CommandReg;
+ UINT16 Command;
+
+ //
+ // Create and Initialize Frame List For the Host Controller.
+ //
+ Status = CreateFrameList (UhcDev);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ FrameListBaseAddrReg = UhcDev->UsbHostControllerBaseAddress + USBFLBASEADD;
+ CommandReg = UhcDev->UsbHostControllerBaseAddress + USBCMD;
+
+ //
+ // Set Frame List Base Address to the specific register to inform the hardware.
+ //
+ SetFrameListBaseAddress (UhcDev, FrameListBaseAddrReg, (UINT32) (UINTN) (UhcDev->FrameListEntry));
+
+ Command = USBReadPortW (UhcDev, CommandReg);
+ Command |= USBCMD_GRESET;
+ USBWritePortW (UhcDev, CommandReg, Command);
+
+ MicroSecondDelay (50 * 1000);
+
+
+ Command &= ~USBCMD_GRESET;
+
+ USBWritePortW (UhcDev, CommandReg, Command);
+
+ //
+ //UHCI spec page120 reset recovery time
+ //
+ MicroSecondDelay (20 * 1000);
+
+ //
+ // Set Run/Stop bit to 1.
+ //
+ Command = USBReadPortW (UhcDev, CommandReg);
+ Command |= USBCMD_RS | USBCMD_MAXP;
+ USBWritePortW (UhcDev, CommandReg, Command);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Create Frame List Structure.
+
+ @param UhcDev UHCI device.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+CreateFrameList (
+ USB_UHC_DEV *UhcDev
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS FrameListBaseAddr;
+ FRAMELIST_ENTRY *FrameListPtr;
+ UINTN Index;
+
+ //
+ // The Frame List ocupies 4K bytes,
+ // and must be aligned on 4-Kbyte boundaries.
+ //
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesData,
+ 1,
+ &FrameListBaseAddr
+ );
+
+ if (Status != EFI_SUCCESS) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ //
+ //Create Control QH and Bulk QH and link them into Framelist Entry
+ //
+ Status = CreateQH(UhcDev, &UhcDev->ConfigQH);
+ if (Status != EFI_SUCCESS) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ ASSERT (UhcDev->ConfigQH != NULL);
+
+ Status = CreateQH(UhcDev, &UhcDev->BulkQH);
+ if (Status != EFI_SUCCESS) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ ASSERT (UhcDev->BulkQH != NULL);
+
+ //
+ //Set the corresponding QH pointer
+ //
+ SetQHHorizontalLinkPtr(UhcDev->ConfigQH, UhcDev->BulkQH);
+ SetQHHorizontalQHorTDSelect (UhcDev->ConfigQH, TRUE);
+ SetQHHorizontalValidorInvalid (UhcDev->ConfigQH, TRUE);
+
+ UhcDev->FrameListEntry = (FRAMELIST_ENTRY *) ((UINTN) FrameListBaseAddr);
+
+ FrameListPtr = UhcDev->FrameListEntry;
+
+ for (Index = 0; Index < 1024; Index++) {
+ FrameListPtr->FrameListPtrTerminate = 0;
+ FrameListPtr->FrameListPtr = (UINT32)(UINTN)UhcDev->ConfigQH >> 4;
+ FrameListPtr->FrameListPtrQSelect = 1;
+ FrameListPtr->FrameListRsvd = 0;
+ FrameListPtr ++;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Read a 16bit width data from Uhc HC IO space register.
+
+ @param UhcDev The UHCI device.
+ @param Port The IO space address of the register.
+
+ @retval the register content read.
+
+**/
+UINT16
+USBReadPortW (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Port
+ )
+{
+ return IoRead16 (Port);
+}
+
+/**
+ Write a 16bit width data into Uhc HC IO space register.
+
+ @param UhcDev The UHCI device.
+ @param Port The IO space address of the register.
+ @param Data The data written into the register.
+
+**/
+VOID
+USBWritePortW (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Port,
+ IN UINT16 Data
+ )
+{
+ IoWrite16 (Port, Data);
+}
+
+/**
+ Write a 32bit width data into Uhc HC IO space register.
+
+ @param UhcDev The UHCI device.
+ @param Port The IO space address of the register.
+ @param Data The data written into the register.
+
+**/
+VOID
+USBWritePortDW (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Port,
+ IN UINT32 Data
+ )
+{
+ IoWrite32 (Port, Data);
+}
+
+/**
+ Clear the content of UHCI's Status Register.
+
+ @param UhcDev The UHCI device.
+ @param StatusAddr The IO space address of the register.
+
+**/
+VOID
+ClearStatusReg (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 StatusAddr
+ )
+{
+ //
+ // Clear the content of UHCI's Status Register
+ //
+ USBWritePortW (UhcDev, StatusAddr, 0x003F);
+}
+
+/**
+ Check whether the host controller operates well.
+
+ @param UhcDev The UHCI device.
+ @param StatusRegAddr The io address of status register.
+
+ @retval TRUE Host controller is working.
+ @retval FALSE Host controller is halted or system error.
+
+**/
+BOOLEAN
+IsStatusOK (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 StatusRegAddr
+ )
+{
+ UINT16 StatusValue;
+
+ StatusValue = USBReadPortW (UhcDev, StatusRegAddr);
+
+ if ((StatusValue & (USBSTS_HCPE | USBSTS_HSE | USBSTS_HCH)) != 0) {
+ return FALSE;
+ } else {
+ return TRUE;
+ }
+}
+
+/**
+ Get Current Frame Number.
+
+ @param UhcDev The UHCI device.
+ @param FrameNumberAddr The address of frame list register.
+
+ @retval The content of the frame list register.
+
+**/
+UINT16
+GetCurrentFrameNumber (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 FrameNumberAddr
+ )
+{
+ //
+ // Gets value in the USB frame number register.
+ //
+ return (UINT16) (USBReadPortW (UhcDev, FrameNumberAddr) & 0x03FF);
+}
+
+/**
+ Set Frame List Base Address.
+
+ @param UhcDev The UHCI device.
+ @param FrameListRegAddr The address of frame list register.
+ @param Addr The address of frame list table.
+
+**/
+VOID
+SetFrameListBaseAddress (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 FrameListRegAddr,
+ IN UINT32 Addr
+ )
+{
+ //
+ // Sets value in the USB Frame List Base Address register.
+ //
+ USBWritePortDW (UhcDev, FrameListRegAddr, (UINT32) (Addr & 0xFFFFF000));
+}
+
+/**
+ Create QH and initialize.
+
+ @param UhcDev The UHCI device.
+ @param PtrQH Place to store QH_STRUCT pointer.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+CreateQH (
+ IN USB_UHC_DEV *UhcDev,
+ OUT QH_STRUCT **PtrQH
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // allocate align memory for QH_STRUCT
+ //
+ Status = AllocateTDorQHStruct (UhcDev, sizeof(QH_STRUCT), (void **)PtrQH);
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ //
+ // init each field of the QH_STRUCT
+ //
+ SetQHHorizontalValidorInvalid (*PtrQH, FALSE);
+ SetQHVerticalValidorInvalid (*PtrQH, FALSE);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Set the horizontal link pointer in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param PtrNext Place to the next QH_STRUCT.
+
+**/
+VOID
+SetQHHorizontalLinkPtr (
+ IN QH_STRUCT *PtrQH,
+ IN VOID *PtrNext
+ )
+{
+ //
+ // Since the QH_STRUCT is aligned on 16-byte boundaries,
+ // Only the highest 28bit of the address is valid
+ // (take 32bit address as an example).
+ //
+ PtrQH->QueueHead.QHHorizontalPtr = (UINT32) (UINTN) PtrNext >> 4;
+}
+
+/**
+ Get the horizontal link pointer in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+
+ @retval The horizontal link pointer in QH.
+
+**/
+VOID *
+GetQHHorizontalLinkPtr (
+ IN QH_STRUCT *PtrQH
+ )
+{
+ //
+ // Restore the 28bit address to 32bit address
+ // (take 32bit address as an example)
+ //
+ return (VOID *) (UINTN) ((PtrQH->QueueHead.QHHorizontalPtr) << 4);
+}
+
+/**
+ Set a QH or TD horizontally to be connected with a specific QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsQH Specify QH or TD is connected.
+
+**/
+VOID
+SetQHHorizontalQHorTDSelect (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsQH
+ )
+{
+ //
+ // if QH is connected, the specified bit is set,
+ // if TD is connected, the specified bit is cleared.
+ //
+ PtrQH->QueueHead.QHHorizontalQSelect = IsQH ? 1 : 0;
+}
+
+/**
+ Set the horizontal validor bit in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsValid Specify the horizontal linker is valid or not.
+
+**/
+VOID
+SetQHHorizontalValidorInvalid (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsValid
+ )
+{
+ //
+ // Valid means the horizontal link pointer is valid,
+ // else, it's invalid.
+ //
+ PtrQH->QueueHead.QHHorizontalTerminate = IsValid ? 0 : 1;
+}
+
+/**
+ Set the vertical link pointer in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param PtrNext Place to the next QH_STRUCT.
+
+**/
+VOID
+SetQHVerticalLinkPtr (
+ IN QH_STRUCT *PtrQH,
+ IN VOID *PtrNext
+ )
+{
+ //
+ // Since the QH_STRUCT is aligned on 16-byte boundaries,
+ // Only the highest 28bit of the address is valid
+ // (take 32bit address as an example).
+ //
+ PtrQH->QueueHead.QHVerticalPtr = (UINT32) (UINTN) PtrNext >> 4;
+}
+
+/**
+ Set a QH or TD vertically to be connected with a specific QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsQH Specify QH or TD is connected.
+
+**/
+VOID
+SetQHVerticalQHorTDSelect (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsQH
+ )
+{
+ //
+ // Set the specified bit if the Vertical Link Pointer pointing to a QH,
+ // Clear the specified bit if the Vertical Link Pointer pointing to a TD.
+ //
+ PtrQH->QueueHead.QHVerticalQSelect = IsQH ? 1 : 0;
+}
+
+/**
+ Set the vertical validor bit in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsValid Specify the vertical linker is valid or not.
+
+**/
+VOID
+SetQHVerticalValidorInvalid (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsValid
+ )
+{
+ //
+ // If TRUE, meaning the Vertical Link Pointer field is valid,
+ // else, the field is invalid.
+ //
+ PtrQH->QueueHead.QHVerticalTerminate = IsValid ? 0 : 1;
+}
+
+/**
+ Get the vertical validor bit in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+
+ @retval The vertical linker is valid or not.
+
+**/
+BOOLEAN
+GetQHHorizontalValidorInvalid (
+ IN QH_STRUCT *PtrQH
+ )
+{
+ //
+ // If TRUE, meaning the Horizontal Link Pointer field is valid,
+ // else, the field is invalid.
+ //
+ return (BOOLEAN) (!(PtrQH->QueueHead.QHHorizontalTerminate));
+}
+
+/**
+ Allocate TD or QH Struct.
+
+ @param UhcDev The UHCI device.
+ @param Size The size of allocation.
+ @param PtrStruct Place to store TD_STRUCT pointer.
+
+ @return EFI_SUCCESS Allocate successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+AllocateTDorQHStruct (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Size,
+ OUT VOID **PtrStruct
+ )
+{
+ EFI_STATUS Status;
+
+ Status = EFI_SUCCESS;
+ *PtrStruct = NULL;
+
+ Status = UhcAllocatePool (
+ UhcDev,
+ (UINT8 **) PtrStruct,
+ Size
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ ZeroMem (*PtrStruct, Size);
+
+ return Status;
+}
+
+/**
+ Create a TD Struct.
+
+ @param UhcDev The UHCI device.
+ @param PtrTD Place to store TD_STRUCT pointer.
+
+ @return EFI_SUCCESS Allocate successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+CreateTD (
+ IN USB_UHC_DEV *UhcDev,
+ OUT TD_STRUCT **PtrTD
+ )
+{
+ EFI_STATUS Status;
+ //
+ // create memory for TD_STRUCT, and align the memory.
+ //
+ Status = AllocateTDorQHStruct (UhcDev, sizeof(TD_STRUCT), (void **)PtrTD);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Make TD ready.
+ //
+ SetTDLinkPtrValidorInvalid (*PtrTD, FALSE);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Generate Setup Stage TD.
+
+ @param UhcDev The UHCI device.
+ @param DevAddr Device address.
+ @param Endpoint Endpoint number.
+ @param DeviceSpeed Device Speed.
+ @param DevRequest Device reuquest.
+ @param RequestLen Request length.
+ @param PtrTD TD_STRUCT generated.
+
+ @return EFI_SUCCESS Generate setup stage TD successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+GenSetupStageTD (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 DevAddr,
+ IN UINT8 Endpoint,
+ IN UINT8 DeviceSpeed,
+ IN UINT8 *DevRequest,
+ IN UINT8 RequestLen,
+ OUT TD_STRUCT **PtrTD
+ )
+{
+ TD_STRUCT *TdStruct;
+ EFI_STATUS Status;
+
+ Status = CreateTD (UhcDev, &TdStruct);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ SetTDLinkPtr (TdStruct, NULL);
+
+ //
+ // Depth first fashion
+ //
+ SetTDLinkPtrDepthorBreadth (TdStruct, TRUE);
+
+ //
+ // initialize as the last TD in the QH context,
+ // this field will be updated in the TD linkage process.
+ //
+ SetTDLinkPtrValidorInvalid (TdStruct, FALSE);
+
+ //
+ // Disable Short Packet Detection by default
+ //
+ EnableorDisableTDShortPacket (TdStruct, FALSE);
+
+ //
+ // Max error counter is 3, retry 3 times when error encountered.
+ //
+ SetTDControlErrorCounter (TdStruct, 3);
+
+ //
+ // set device speed attribute
+ // (TRUE - Slow Device; FALSE - Full Speed Device)
+ //
+ switch (DeviceSpeed) {
+ case USB_SLOW_SPEED_DEVICE:
+ SetTDLoworFullSpeedDevice (TdStruct, TRUE);
+ break;
+
+ case USB_FULL_SPEED_DEVICE:
+ SetTDLoworFullSpeedDevice (TdStruct, FALSE);
+ break;
+ }
+ //
+ // Non isochronous transfer TD
+ //
+ SetTDControlIsochronousorNot (TdStruct, FALSE);
+
+ //
+ // Interrupt On Complete bit be set to zero,
+ // Disable IOC interrupt.
+ //
+ SetorClearTDControlIOC (TdStruct, FALSE);
+
+ //
+ // Set TD Active bit
+ //
+ SetTDStatusActiveorInactive (TdStruct, TRUE);
+
+ SetTDTokenMaxLength (TdStruct, RequestLen);
+
+ SetTDTokenDataToggle0 (TdStruct);
+
+ SetTDTokenEndPoint (TdStruct, Endpoint);
+
+ SetTDTokenDeviceAddress (TdStruct, DevAddr);
+
+ SetTDTokenPacketID (TdStruct, SETUP_PACKET_ID);
+
+ TdStruct->PtrTDBuffer = (UINT8 *) DevRequest;
+ TdStruct->TDBufferLength = RequestLen;
+ SetTDDataBuffer (TdStruct);
+
+ *PtrTD = TdStruct;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Generate Data Stage TD.
+
+ @param UhcDev The UHCI device.
+ @param DevAddr Device address.
+ @param Endpoint Endpoint number.
+ @param PtrData Data buffer.
+ @param Len Data length.
+ @param PktID PacketID.
+ @param Toggle Data toggle value.
+ @param DeviceSpeed Device Speed.
+ @param PtrTD TD_STRUCT generated.
+
+ @return EFI_SUCCESS Generate data stage TD successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+GenDataTD (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 DevAddr,
+ IN UINT8 Endpoint,
+ IN UINT8 *PtrData,
+ IN UINT8 Len,
+ IN UINT8 PktID,
+ IN UINT8 Toggle,
+ IN UINT8 DeviceSpeed,
+ OUT TD_STRUCT **PtrTD
+ )
+{
+ TD_STRUCT *TdStruct;
+ EFI_STATUS Status;
+
+ Status = CreateTD (UhcDev, &TdStruct);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ SetTDLinkPtr (TdStruct, NULL);
+
+ //
+ // Depth first fashion
+ //
+ SetTDLinkPtrDepthorBreadth (TdStruct, TRUE);
+
+ //
+ // Link pointer pointing to TD struct
+ //
+ SetTDLinkPtrQHorTDSelect (TdStruct, FALSE);
+
+ //
+ // initialize as the last TD in the QH context,
+ // this field will be updated in the TD linkage process.
+ //
+ SetTDLinkPtrValidorInvalid (TdStruct, FALSE);
+
+ //
+ // Disable short packet detect
+ //
+ EnableorDisableTDShortPacket (TdStruct, FALSE);
+ //
+ // Max error counter is 3
+ //
+ SetTDControlErrorCounter (TdStruct, 3);
+
+ //
+ // set device speed attribute
+ // (TRUE - Slow Device; FALSE - Full Speed Device)
+ //
+ switch (DeviceSpeed) {
+ case USB_SLOW_SPEED_DEVICE:
+ SetTDLoworFullSpeedDevice (TdStruct, TRUE);
+ break;
+
+ case USB_FULL_SPEED_DEVICE:
+ SetTDLoworFullSpeedDevice (TdStruct, FALSE);
+ break;
+ }
+ //
+ // Non isochronous transfer TD
+ //
+ SetTDControlIsochronousorNot (TdStruct, FALSE);
+
+ //
+ // Disable Interrupt On Complete
+ // Disable IOC interrupt.
+ //
+ SetorClearTDControlIOC (TdStruct, FALSE);
+
+ //
+ // Set Active bit
+ //
+ SetTDStatusActiveorInactive (TdStruct, TRUE);
+
+ SetTDTokenMaxLength (TdStruct, Len);
+
+ if (Toggle != 0) {
+ SetTDTokenDataToggle1 (TdStruct);
+ } else {
+ SetTDTokenDataToggle0 (TdStruct);
+ }
+
+ SetTDTokenEndPoint (TdStruct, Endpoint);
+
+ SetTDTokenDeviceAddress (TdStruct, DevAddr);
+
+ SetTDTokenPacketID (TdStruct, PktID);
+
+ TdStruct->PtrTDBuffer = (UINT8 *) PtrData;
+ TdStruct->TDBufferLength = Len;
+ SetTDDataBuffer (TdStruct);
+
+ *PtrTD = TdStruct;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Generate Status Stage TD.
+
+ @param UhcDev The UHCI device.
+ @param DevAddr Device address.
+ @param Endpoint Endpoint number.
+ @param PktID PacketID.
+ @param DeviceSpeed Device Speed.
+ @param PtrTD TD_STRUCT generated.
+
+ @return EFI_SUCCESS Generate status stage TD successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+CreateStatusTD (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 DevAddr,
+ IN UINT8 Endpoint,
+ IN UINT8 PktID,
+ IN UINT8 DeviceSpeed,
+ OUT TD_STRUCT **PtrTD
+ )
+{
+ TD_STRUCT *PtrTDStruct;
+ EFI_STATUS Status;
+
+ Status = CreateTD (UhcDev, &PtrTDStruct);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ SetTDLinkPtr (PtrTDStruct, NULL);
+
+ //
+ // Depth first fashion
+ //
+ SetTDLinkPtrDepthorBreadth (PtrTDStruct, TRUE);
+
+ //
+ // initialize as the last TD in the QH context,
+ // this field will be updated in the TD linkage process.
+ //
+ SetTDLinkPtrValidorInvalid (PtrTDStruct, FALSE);
+
+ //
+ // Disable short packet detect
+ //
+ EnableorDisableTDShortPacket (PtrTDStruct, FALSE);
+
+ //
+ // Max error counter is 3
+ //
+ SetTDControlErrorCounter (PtrTDStruct, 3);
+
+ //
+ // set device speed attribute
+ // (TRUE - Slow Device; FALSE - Full Speed Device)
+ //
+ switch (DeviceSpeed) {
+ case USB_SLOW_SPEED_DEVICE:
+ SetTDLoworFullSpeedDevice (PtrTDStruct, TRUE);
+ break;
+
+ case USB_FULL_SPEED_DEVICE:
+ SetTDLoworFullSpeedDevice (PtrTDStruct, FALSE);
+ break;
+ }
+ //
+ // Non isochronous transfer TD
+ //
+ SetTDControlIsochronousorNot (PtrTDStruct, FALSE);
+
+ //
+ // Disable Interrupt On Complete
+ // Disable IOC interrupt.
+ //
+ SetorClearTDControlIOC (PtrTDStruct, FALSE);
+
+ //
+ // Set TD Active bit
+ //
+ SetTDStatusActiveorInactive (PtrTDStruct, TRUE);
+
+ SetTDTokenMaxLength (PtrTDStruct, 0);
+
+ SetTDTokenDataToggle1 (PtrTDStruct);
+
+ SetTDTokenEndPoint (PtrTDStruct, Endpoint);
+
+ SetTDTokenDeviceAddress (PtrTDStruct, DevAddr);
+
+ SetTDTokenPacketID (PtrTDStruct, PktID);
+
+ PtrTDStruct->PtrTDBuffer = NULL;
+ PtrTDStruct->TDBufferLength = 0;
+ SetTDDataBuffer (PtrTDStruct);
+
+ *PtrTD = PtrTDStruct;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Set the link pointer validor bit in TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsValid Specify the linker pointer is valid or not.
+
+**/
+VOID
+SetTDLinkPtrValidorInvalid (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsValid
+ )
+{
+ //
+ // Valid means the link pointer is valid,
+ // else, it's invalid.
+ //
+ PtrTDStruct->TDData.TDLinkPtrTerminate = (IsValid ? 0 : 1);
+}
+
+/**
+ Set the Link Pointer pointing to a QH or TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsQH Specify QH or TD is connected.
+
+**/
+VOID
+SetTDLinkPtrQHorTDSelect (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsQH
+ )
+{
+ //
+ // Indicate whether the Link Pointer pointing to a QH or TD
+ //
+ PtrTDStruct->TDData.TDLinkPtrQSelect = (IsQH ? 1 : 0);
+}
+
+/**
+ Set the traverse is depth-first or breadth-first.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsDepth Specify the traverse is depth-first or breadth-first.
+
+**/
+VOID
+SetTDLinkPtrDepthorBreadth (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsDepth
+ )
+{
+ //
+ // If TRUE, indicating the host controller should process in depth first fashion,
+ // else, the host controller should process in breadth first fashion
+ //
+ PtrTDStruct->TDData.TDLinkPtrDepthSelect = (IsDepth ? 1 : 0);
+}
+
+/**
+ Set TD Link Pointer in TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param PtrNext Place to the next TD_STRUCT.
+
+**/
+VOID
+SetTDLinkPtr (
+ IN TD_STRUCT *PtrTDStruct,
+ IN VOID *PtrNext
+ )
+{
+ //
+ // Set TD Link Pointer. Since QH,TD align on 16-byte boundaries,
+ // only the highest 28 bits are valid. (if take 32bit address as an example)
+ //
+ PtrTDStruct->TDData.TDLinkPtr = (UINT32) (UINTN) PtrNext >> 4;
+}
+
+/**
+ Get TD Link Pointer.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval Get TD Link Pointer in TD.
+
+**/
+VOID *
+GetTDLinkPtr (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ //
+ // Get TD Link Pointer. Restore it back to 32bit
+ // (if take 32bit address as an example)
+ //
+ return (VOID *) (UINTN) ((PtrTDStruct->TDData.TDLinkPtr) << 4);
+}
+
+/**
+ Get the information about whether the Link Pointer field pointing to
+ a QH or a TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval whether the Link Pointer field pointing to a QH or a TD.
+
+**/
+BOOLEAN
+IsTDLinkPtrQHOrTD (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ //
+ // Get the information about whether the Link Pointer field pointing to
+ // a QH or a TD.
+ //
+ return (BOOLEAN) (PtrTDStruct->TDData.TDLinkPtrQSelect);
+}
+
+/**
+ Enable/Disable short packet detection mechanism.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsEnable Enable or disable short packet detection mechanism.
+
+**/
+VOID
+EnableorDisableTDShortPacket (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsEnable
+ )
+{
+ //
+ // TRUE means enable short packet detection mechanism.
+ //
+ PtrTDStruct->TDData.TDStatusSPD = (IsEnable ? 1 : 0);
+}
+
+/**
+ Set the max error counter in TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param MaxErrors The number of allowable error.
+
+**/
+VOID
+SetTDControlErrorCounter (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINT8 MaxErrors
+ )
+{
+ //
+ // valid value of MaxErrors is 0,1,2,3
+ //
+ if (MaxErrors > 3) {
+ MaxErrors = 3;
+ }
+
+ PtrTDStruct->TDData.TDStatusErr = MaxErrors;
+}
+
+/**
+ Set the TD is targeting a low-speed device or not.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsLowSpeedDevice Whether The device is low-speed.
+
+**/
+VOID
+SetTDLoworFullSpeedDevice (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsLowSpeedDevice
+ )
+{
+ //
+ // TRUE means the TD is targeting at a Low-speed device
+ //
+ PtrTDStruct->TDData.TDStatusLS = (IsLowSpeedDevice ? 1 : 0);
+}
+
+/**
+ Set the TD is isochronous transfer type or not.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsIsochronous Whether the transaction isochronous transfer type.
+
+**/
+VOID
+SetTDControlIsochronousorNot (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsIsochronous
+ )
+{
+ //
+ // TRUE means the TD belongs to Isochronous transfer type.
+ //
+ PtrTDStruct->TDData.TDStatusIOS = (IsIsochronous ? 1 : 0);
+}
+
+/**
+ Set if UCHI should issue an interrupt on completion of the frame
+ in which this TD is executed
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsSet Whether HC should issue an interrupt on completion.
+
+**/
+VOID
+SetorClearTDControlIOC (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsSet
+ )
+{
+ //
+ // If this bit is set, it indicates that the host controller should issue
+ // an interrupt on completion of the frame in which this TD is executed.
+ //
+ PtrTDStruct->TDData.TDStatusIOC = IsSet ? 1 : 0;
+}
+
+/**
+ Set if the TD is active and can be executed.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsActive Whether the TD is active and can be executed.
+
+**/
+VOID
+SetTDStatusActiveorInactive (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsActive
+ )
+{
+ //
+ // If this bit is set, it indicates that the TD is active and can be
+ // executed.
+ //
+ if (IsActive) {
+ PtrTDStruct->TDData.TDStatus |= 0x80;
+ } else {
+ PtrTDStruct->TDData.TDStatus &= 0x7F;
+ }
+}
+
+/**
+ Specifies the maximum number of data bytes allowed for the transfer.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param MaxLen The maximum number of data bytes allowed.
+
+ @retval The allowed maximum number of data.
+**/
+UINT16
+SetTDTokenMaxLength (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINT16 MaxLen
+ )
+{
+ //
+ // Specifies the maximum number of data bytes allowed for the transfer.
+ // the legal value extent is 0 ~ 0x500.
+ //
+ if (MaxLen > 0x500) {
+ MaxLen = 0x500;
+ }
+
+ PtrTDStruct->TDData.TDTokenMaxLen = MaxLen - 1;
+
+ return MaxLen;
+}
+
+/**
+ Set the data toggle bit to DATA1.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+**/
+VOID
+SetTDTokenDataToggle1 (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ //
+ // Set the data toggle bit to DATA1
+ //
+ PtrTDStruct->TDData.TDTokenDataToggle = 1;
+}
+
+/**
+ Set the data toggle bit to DATA0.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+**/
+VOID
+SetTDTokenDataToggle0 (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ //
+ // Set the data toggle bit to DATA0
+ //
+ PtrTDStruct->TDData.TDTokenDataToggle = 0;
+}
+
+/**
+ Set EndPoint Number the TD is targeting at.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param EndPoint The Endport number of the target.
+
+**/
+VOID
+SetTDTokenEndPoint (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINTN EndPoint
+ )
+{
+ //
+ // Set EndPoint Number the TD is targeting at.
+ //
+ PtrTDStruct->TDData.TDTokenEndPt = (UINT8) EndPoint;
+}
+
+/**
+ Set Device Address the TD is targeting at.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param DevAddr The Device Address of the target.
+
+**/
+VOID
+SetTDTokenDeviceAddress (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINTN DevAddr
+ )
+{
+ //
+ // Set Device Address the TD is targeting at.
+ //
+ PtrTDStruct->TDData.TDTokenDevAddr = (UINT8) DevAddr;
+}
+
+/**
+ Set Packet Identification the TD is targeting at.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param PacketID The Packet Identification of the target.
+
+**/
+VOID
+SetTDTokenPacketID (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINT8 PacketID
+ )
+{
+ //
+ // Set the Packet Identification to be used for this transaction.
+ //
+ PtrTDStruct->TDData.TDTokenPID = PacketID;
+}
+
+/**
+ Set the beginning address of the data buffer that will be used
+ during the transaction.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+**/
+VOID
+SetTDDataBuffer (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ //
+ // Set the beginning address of the data buffer that will be used
+ // during the transaction.
+ //
+ PtrTDStruct->TDData.TDBufferPtr = (UINT32) (UINTN) (PtrTDStruct->PtrTDBuffer);
+}
+
+/**
+ Detect whether the TD is active.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The TD is active or not.
+
+**/
+BOOLEAN
+IsTDStatusActive (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ UINT8 TDStatus;
+
+ //
+ // Detect whether the TD is active.
+ //
+ TDStatus = (UINT8) (PtrTDStruct->TDData.TDStatus);
+ return (BOOLEAN) (TDStatus & 0x80);
+}
+
+/**
+ Detect whether the TD is stalled.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The TD is stalled or not.
+
+**/
+BOOLEAN
+IsTDStatusStalled (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ UINT8 TDStatus;
+
+ //
+ // Detect whether the device/endpoint addressed by this TD is stalled.
+ //
+ TDStatus = (UINT8) (PtrTDStruct->TDData.TDStatus);
+ return (BOOLEAN) (TDStatus & 0x40);
+}
+
+/**
+ Detect whether Data Buffer Error is happened.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The Data Buffer Error is happened or not.
+
+**/
+BOOLEAN
+IsTDStatusBufferError (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ UINT8 TDStatus;
+
+ //
+ // Detect whether Data Buffer Error is happened.
+ //
+ TDStatus = (UINT8) (PtrTDStruct->TDData.TDStatus);
+ return (BOOLEAN) (TDStatus & 0x20);
+}
+
+/**
+ Detect whether Babble Error is happened.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The Babble Error is happened or not.
+
+**/
+BOOLEAN
+IsTDStatusBabbleError (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ UINT8 TDStatus;
+
+ //
+ // Detect whether Babble Error is happened.
+ //
+ TDStatus = (UINT8) (PtrTDStruct->TDData.TDStatus);
+ return (BOOLEAN) (TDStatus & 0x10);
+}
+
+/**
+ Detect whether NAK is received.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The NAK is received or not.
+
+**/
+BOOLEAN
+IsTDStatusNAKReceived (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ UINT8 TDStatus;
+
+ //
+ // Detect whether NAK is received.
+ //
+ TDStatus = (UINT8) (PtrTDStruct->TDData.TDStatus);
+ return (BOOLEAN) (TDStatus & 0x08);
+}
+
+/**
+ Detect whether CRC/Time Out Error is encountered.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The CRC/Time Out Error is encountered or not.
+
+**/
+BOOLEAN
+IsTDStatusCRCTimeOutError (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ UINT8 TDStatus;
+
+ //
+ // Detect whether CRC/Time Out Error is encountered.
+ //
+ TDStatus = (UINT8) (PtrTDStruct->TDData.TDStatus);
+ return (BOOLEAN) (TDStatus & 0x04);
+}
+
+/**
+ Detect whether Bitstuff Error is received.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The Bitstuff Error is received or not.
+
+**/
+BOOLEAN
+IsTDStatusBitStuffError (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ UINT8 TDStatus;
+
+ //
+ // Detect whether Bitstuff Error is received.
+ //
+ TDStatus = (UINT8) (PtrTDStruct->TDData.TDStatus);
+ return (BOOLEAN) (TDStatus & 0x02);
+}
+
+/**
+ Retrieve the actual number of bytes that were tansferred.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The actual number of bytes that were tansferred.
+
+**/
+UINT16
+GetTDStatusActualLength (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ //
+ // Retrieve the actual number of bytes that were tansferred.
+ // the value is encoded as n-1. so return the decoded value.
+ //
+ return (UINT16) ((PtrTDStruct->TDData.TDStatusActualLength) + 1);
+}
+
+/**
+ Retrieve the information of whether the Link Pointer field is valid or not.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The linker pointer field is valid or not.
+
+**/
+BOOLEAN
+GetTDLinkPtrValidorInvalid (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ //
+ // Retrieve the information of whether the Link Pointer field
+ // is valid or not.
+ //
+ if ((PtrTDStruct->TDData.TDLinkPtrTerminate & BIT0) != 0) {
+ return FALSE;
+ } else {
+ return TRUE;
+ }
+
+}
+
+/**
+ Count TD Number from PtrFirstTD.
+
+ @param PtrFirstTD Place to store TD_STRUCT pointer.
+
+ @retval The queued TDs number.
+
+**/
+UINTN
+CountTDsNumber (
+ IN TD_STRUCT *PtrFirstTD
+ )
+{
+ UINTN Number;
+ TD_STRUCT *Ptr;
+
+ //
+ // Count the queued TDs number.
+ //
+ Number = 0;
+ Ptr = PtrFirstTD;
+ while (Ptr != 0) {
+ Ptr = (TD_STRUCT *) Ptr->PtrNextTD;
+ Number++;
+ }
+
+ return Number;
+}
+
+/**
+ Link TD To QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param PtrTD Place to store TD_STRUCT pointer.
+
+**/
+VOID
+LinkTDToQH (
+ IN QH_STRUCT *PtrQH,
+ IN TD_STRUCT *PtrTD
+ )
+{
+ if (PtrQH == NULL || PtrTD == NULL) {
+ return ;
+ }
+ //
+ // Validate QH Vertical Ptr field
+ //
+ SetQHVerticalValidorInvalid (PtrQH, TRUE);
+
+ //
+ // Vertical Ptr pointing to TD structure
+ //
+ SetQHVerticalQHorTDSelect (PtrQH, FALSE);
+
+ SetQHVerticalLinkPtr (PtrQH, (VOID *) PtrTD);
+
+ PtrQH->PtrDown = (VOID *) PtrTD;
+}
+
+/**
+ Link TD To TD.
+
+ @param PtrPreTD Place to store TD_STRUCT pointer.
+ @param PtrTD Place to store TD_STRUCT pointer.
+
+**/
+VOID
+LinkTDToTD (
+ IN TD_STRUCT *PtrPreTD,
+ IN TD_STRUCT *PtrTD
+ )
+{
+ if (PtrPreTD == NULL || PtrTD == NULL) {
+ return ;
+ }
+ //
+ // Depth first fashion
+ //
+ SetTDLinkPtrDepthorBreadth (PtrPreTD, TRUE);
+
+ //
+ // Link pointer pointing to TD struct
+ //
+ SetTDLinkPtrQHorTDSelect (PtrPreTD, FALSE);
+
+ //
+ // Validate the link pointer valid bit
+ //
+ SetTDLinkPtrValidorInvalid (PtrPreTD, TRUE);
+
+ SetTDLinkPtr (PtrPreTD, PtrTD);
+
+ PtrPreTD->PtrNextTD = (VOID *) PtrTD;
+
+ PtrTD->PtrNextTD = NULL;
+}
+
+/**
+ Execute Control Transfer.
+
+ @param UhcDev The UCHI device.
+ @param PtrTD A pointer to TD_STRUCT data.
+ @param ActualLen Actual transfer Length.
+ @param TimeOut TimeOut value.
+ @param TransferResult Transfer Result.
+
+ @return EFI_DEVICE_ERROR The transfer failed due to transfer error.
+ @return EFI_TIMEOUT The transfer failed due to time out.
+ @return EFI_SUCCESS The transfer finished OK.
+
+**/
+EFI_STATUS
+ExecuteControlTransfer (
+ IN USB_UHC_DEV *UhcDev,
+ IN TD_STRUCT *PtrTD,
+ OUT UINTN *ActualLen,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ )
+{
+ UINTN ErrTDPos;
+ UINTN Delay;
+ BOOLEAN InfiniteLoop;
+
+ ErrTDPos = 0;
+ *TransferResult = EFI_USB_NOERROR;
+ *ActualLen = 0;
+ InfiniteLoop = FALSE;
+
+ Delay = TimeOut * STALL_1_MILLI_SECOND;
+ //
+ // If Timeout is 0, then the caller must wait for the function to be completed
+ // until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.
+ //
+ if (TimeOut == 0) {
+ InfiniteLoop = TRUE;
+ }
+
+ do {
+
+ CheckTDsResults (PtrTD, TransferResult, &ErrTDPos, ActualLen);
+
+ //
+ // TD is inactive, means the control transfer is end.
+ //
+ if ((*TransferResult & EFI_USB_ERR_NOTEXECUTE) != EFI_USB_ERR_NOTEXECUTE) {
+ break;
+ }
+ MicroSecondDelay (STALL_1_MICRO_SECOND);
+ Delay--;
+
+ } while (InfiniteLoop || (Delay != 0));
+
+ if (*TransferResult != EFI_USB_NOERROR) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Execute Bulk Transfer.
+
+ @param UhcDev The UCHI device.
+ @param PtrTD A pointer to TD_STRUCT data.
+ @param ActualLen Actual transfer Length.
+ @param DataToggle DataToggle value.
+ @param TimeOut TimeOut value.
+ @param TransferResult Transfer Result.
+
+ @return EFI_DEVICE_ERROR The transfer failed due to transfer error.
+ @return EFI_TIMEOUT The transfer failed due to time out.
+ @return EFI_SUCCESS The transfer finished OK.
+
+**/
+EFI_STATUS
+ExecBulkTransfer (
+ IN USB_UHC_DEV *UhcDev,
+ IN TD_STRUCT *PtrTD,
+ IN OUT UINTN *ActualLen,
+ IN UINT8 *DataToggle,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ )
+{
+ UINTN ErrTDPos;
+ UINTN ScrollNum;
+ UINTN Delay;
+ BOOLEAN InfiniteLoop;
+
+ ErrTDPos = 0;
+ *TransferResult = EFI_USB_NOERROR;
+ *ActualLen = 0;
+ InfiniteLoop = FALSE;
+
+ Delay = TimeOut * STALL_1_MILLI_SECOND;
+ //
+ // If Timeout is 0, then the caller must wait for the function to be completed
+ // until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.
+ //
+ if (TimeOut == 0) {
+ InfiniteLoop = TRUE;
+ }
+
+ do {
+
+ CheckTDsResults (PtrTD, TransferResult, &ErrTDPos, ActualLen);
+ //
+ // TD is inactive, thus meaning bulk transfer's end.
+ //
+ if ((*TransferResult & EFI_USB_ERR_NOTEXECUTE) != EFI_USB_ERR_NOTEXECUTE) {
+ break;
+ }
+ MicroSecondDelay (STALL_1_MICRO_SECOND);
+ Delay--;
+
+ } while (InfiniteLoop || (Delay != 0));
+
+ //
+ // has error
+ //
+ if (*TransferResult != EFI_USB_NOERROR) {
+ //
+ // scroll the Data Toggle back to the last success TD
+ //
+ ScrollNum = CountTDsNumber (PtrTD) - ErrTDPos;
+ if ((ScrollNum % 2) != 0) {
+ *DataToggle ^= 1;
+ }
+
+ //
+ // If error, wait 100ms to retry by upper layer
+ //
+ MicroSecondDelay (100 * 1000);
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Delete Queued TDs.
+
+ @param UhcDev The UCHI device.
+ @param PtrFirstTD Place to store TD_STRUCT pointer.
+
+**/
+VOID
+DeleteQueuedTDs (
+ IN USB_UHC_DEV *UhcDev,
+ IN TD_STRUCT *PtrFirstTD
+ )
+{
+ TD_STRUCT *Tptr1;
+
+ TD_STRUCT *Tptr2;
+
+ Tptr1 = PtrFirstTD;
+ //
+ // Delete all the TDs in a queue.
+ //
+ while (Tptr1 != NULL) {
+
+ Tptr2 = Tptr1;
+
+ if (!GetTDLinkPtrValidorInvalid (Tptr2)) {
+ Tptr1 = NULL;
+ } else {
+ //
+ // has more than one TD in the queue.
+ //
+ Tptr1 = GetTDLinkPtr (Tptr2);
+ }
+
+ UhcFreePool (UhcDev, (UINT8 *) Tptr2, sizeof (TD_STRUCT));
+ }
+
+ return ;
+}
+
+/**
+ Check TDs Results.
+
+ @param PtrTD A pointer to TD_STRUCT data.
+ @param Result The result to return.
+ @param ErrTDPos The Error TD position.
+ @param ActualTransferSize Actual transfer size.
+
+ @retval The TD is executed successfully or not.
+
+**/
+BOOLEAN
+CheckTDsResults (
+ IN TD_STRUCT *PtrTD,
+ OUT UINT32 *Result,
+ OUT UINTN *ErrTDPos,
+ OUT UINTN *ActualTransferSize
+ )
+{
+ UINTN Len;
+
+ *Result = EFI_USB_NOERROR;
+ *ErrTDPos = 0;
+
+ //
+ // Init to zero.
+ //
+ *ActualTransferSize = 0;
+
+ while (PtrTD != NULL) {
+
+ if (IsTDStatusActive (PtrTD)) {
+ *Result |= EFI_USB_ERR_NOTEXECUTE;
+ }
+
+ if (IsTDStatusStalled (PtrTD)) {
+ *Result |= EFI_USB_ERR_STALL;
+ }
+
+ if (IsTDStatusBufferError (PtrTD)) {
+ *Result |= EFI_USB_ERR_BUFFER;
+ }
+
+ if (IsTDStatusBabbleError (PtrTD)) {
+ *Result |= EFI_USB_ERR_BABBLE;
+ }
+
+ if (IsTDStatusNAKReceived (PtrTD)) {
+ *Result |= EFI_USB_ERR_NAK;
+ }
+
+ if (IsTDStatusCRCTimeOutError (PtrTD)) {
+ *Result |= EFI_USB_ERR_TIMEOUT;
+ }
+
+ if (IsTDStatusBitStuffError (PtrTD)) {
+ *Result |= EFI_USB_ERR_BITSTUFF;
+ }
+ //
+ // Accumulate actual transferred data length in each TD.
+ //
+ Len = GetTDStatusActualLength (PtrTD) & 0x7FF;
+ *ActualTransferSize += Len;
+
+ //
+ // if any error encountered, stop processing the left TDs.
+ //
+ if ((*Result) != 0) {
+ return FALSE;
+ }
+
+ PtrTD = (TD_STRUCT *) (PtrTD->PtrNextTD);
+ //
+ // Record the first Error TD's position in the queue,
+ // this value is zero-based.
+ //
+ (*ErrTDPos)++;
+ }
+
+ return TRUE;
+}
+
+/**
+ Create Memory Block.
+
+ @param UhcDev The UCHI device.
+ @param MemoryHeader The Pointer to allocated memory block.
+ @param MemoryBlockSizeInPages The page size of memory block to be allocated.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+CreateMemoryBlock (
+ IN USB_UHC_DEV *UhcDev,
+ OUT MEMORY_MANAGE_HEADER **MemoryHeader,
+ IN UINTN MemoryBlockSizeInPages
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS TempPtr;
+ UINTN MemPages;
+ UINT8 *Ptr;
+
+ //
+ // Memory Block uses MemoryBlockSizeInPages pages,
+ // memory management header and bit array use 1 page
+ //
+ MemPages = MemoryBlockSizeInPages + 1;
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesData,
+ MemPages,
+ &TempPtr
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Ptr = (UINT8 *) ((UINTN) TempPtr);
+
+ ZeroMem (Ptr, MemPages * EFI_PAGE_SIZE);
+
+ *MemoryHeader = (MEMORY_MANAGE_HEADER *) Ptr;
+ //
+ // adjust Ptr pointer to the next empty memory
+ //
+ Ptr += sizeof (MEMORY_MANAGE_HEADER);
+ //
+ // Set Bit Array initial address
+ //
+ (*MemoryHeader)->BitArrayPtr = Ptr;
+
+ (*MemoryHeader)->Next = NULL;
+
+ //
+ // Memory block initial address
+ //
+ Ptr = (UINT8 *) ((UINTN) TempPtr);
+ Ptr += EFI_PAGE_SIZE;
+ (*MemoryHeader)->MemoryBlockPtr = Ptr;
+ //
+ // set Memory block size
+ //
+ (*MemoryHeader)->MemoryBlockSizeInBytes = MemoryBlockSizeInPages * EFI_PAGE_SIZE;
+ //
+ // each bit in Bit Array will manage 32byte memory in memory block
+ //
+ (*MemoryHeader)->BitArraySizeInBytes = ((*MemoryHeader)->MemoryBlockSizeInBytes / 32) / 8;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Initialize UHCI memory management.
+
+ @param UhcDev The UCHI device.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+InitializeMemoryManagement (
+ IN USB_UHC_DEV *UhcDev
+ )
+{
+ MEMORY_MANAGE_HEADER *MemoryHeader;
+ EFI_STATUS Status;
+ UINTN MemPages;
+
+ MemPages = NORMAL_MEMORY_BLOCK_UNIT_IN_PAGES;
+ Status = CreateMemoryBlock (UhcDev, &MemoryHeader, MemPages);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ UhcDev->Header1 = MemoryHeader;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Initialize UHCI memory management.
+
+ @param UhcDev The UCHI device.
+ @param Pool Buffer pointer to store the buffer pointer.
+ @param AllocSize The size of the pool to be allocated.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+UhcAllocatePool (
+ IN USB_UHC_DEV *UhcDev,
+ OUT UINT8 **Pool,
+ IN UINTN AllocSize
+ )
+{
+ MEMORY_MANAGE_HEADER *MemoryHeader;
+ MEMORY_MANAGE_HEADER *TempHeaderPtr;
+ MEMORY_MANAGE_HEADER *NewMemoryHeader;
+ UINTN RealAllocSize;
+ UINTN MemoryBlockSizeInPages;
+ EFI_STATUS Status;
+
+ *Pool = NULL;
+
+ MemoryHeader = UhcDev->Header1;
+
+ //
+ // allocate unit is 32 byte (align on 32 byte)
+ //
+ if ((AllocSize & 0x1F) != 0) {
+ RealAllocSize = (AllocSize / 32 + 1) * 32;
+ } else {
+ RealAllocSize = AllocSize;
+ }
+
+ Status = EFI_NOT_FOUND;
+ for (TempHeaderPtr = MemoryHeader; TempHeaderPtr != NULL; TempHeaderPtr = TempHeaderPtr->Next) {
+
+ Status = AllocMemInMemoryBlock (
+ TempHeaderPtr,
+ (VOID **) Pool,
+ RealAllocSize / 32
+ );
+ if (!EFI_ERROR (Status)) {
+ return EFI_SUCCESS;
+ }
+ }
+ //
+ // There is no enough memory,
+ // Create a new Memory Block
+ //
+ //
+ // if pool size is larger than NORMAL_MEMORY_BLOCK_UNIT_IN_PAGES,
+ // just allocate a large enough memory block.
+ //
+ if (RealAllocSize > (NORMAL_MEMORY_BLOCK_UNIT_IN_PAGES * EFI_PAGE_SIZE)) {
+ MemoryBlockSizeInPages = RealAllocSize / EFI_PAGE_SIZE + 1;
+ } else {
+ MemoryBlockSizeInPages = NORMAL_MEMORY_BLOCK_UNIT_IN_PAGES;
+ }
+
+ Status = CreateMemoryBlock (UhcDev, &NewMemoryHeader, MemoryBlockSizeInPages);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ //
+ // Link the new Memory Block to the Memory Header list
+ //
+ InsertMemoryHeaderToList (MemoryHeader, NewMemoryHeader);
+
+ Status = AllocMemInMemoryBlock (
+ NewMemoryHeader,
+ (VOID **) Pool,
+ RealAllocSize / 32
+ );
+ return Status;
+}
+
+/**
+ Alloc Memory In MemoryBlock.
+
+ @param MemoryHeader The pointer to memory manage header.
+ @param Pool Buffer pointer to store the buffer pointer.
+ @param NumberOfMemoryUnit The size of the pool to be allocated.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+AllocMemInMemoryBlock (
+ IN MEMORY_MANAGE_HEADER *MemoryHeader,
+ OUT VOID **Pool,
+ IN UINTN NumberOfMemoryUnit
+ )
+{
+ UINTN TempBytePos;
+ UINTN FoundBytePos;
+ UINT8 Index;
+ UINT8 FoundBitPos;
+ UINT8 ByteValue;
+ UINT8 BitValue;
+ UINTN NumberOfZeros;
+ UINTN Count;
+
+ FoundBytePos = 0;
+ FoundBitPos = 0;
+
+ ByteValue = MemoryHeader->BitArrayPtr[0];
+ NumberOfZeros = 0;
+ Index = 0;
+ for (TempBytePos = 0; TempBytePos < MemoryHeader->BitArraySizeInBytes;) {
+ //
+ // Pop out BitValue from a byte in TempBytePos.
+ //
+ BitValue = (UINT8)(ByteValue & 0x1);
+
+ if (BitValue == 0) {
+ //
+ // Found a free bit, the NumberOfZeros only record the number of those consecutive zeros
+ //
+ NumberOfZeros++;
+ //
+ // Found enough consecutive free space, break the loop
+ //
+ if (NumberOfZeros >= NumberOfMemoryUnit) {
+ break;
+ }
+ } else {
+ //
+ // Encountering a '1', meant the bit is ocupied.
+ //
+ if (NumberOfZeros >= NumberOfMemoryUnit) {
+ //
+ // Found enough consecutive free space,break the loop
+ //
+ break;
+ } else {
+ //
+ // the NumberOfZeros only record the number of those consecutive zeros,
+ // so reset the NumberOfZeros to 0 when encountering '1' before finding
+ // enough consecutive '0's
+ //
+ NumberOfZeros = 0;
+ //
+ // reset the (FoundBytePos,FoundBitPos) to the position of '1'
+ //
+ FoundBytePos = TempBytePos;
+ FoundBitPos = Index;
+ }
+ }
+ //
+ // right shift the byte
+ //
+ ByteValue /= 2;
+
+ //
+ // step forward a bit
+ //
+ Index++;
+ if (Index == 8) {
+ //
+ // step forward a byte, getting the byte value,
+ // and reset the bit pos.
+ //
+ TempBytePos += 1;
+ ByteValue = MemoryHeader->BitArrayPtr[TempBytePos];
+ Index = 0;
+ }
+ }
+
+ if (NumberOfZeros < NumberOfMemoryUnit) {
+ return EFI_NOT_FOUND;
+ }
+ //
+ // Found enough free space.
+ //
+ //
+ // The values recorded in (FoundBytePos,FoundBitPos) have two conditions:
+ // 1)(FoundBytePos,FoundBitPos) record the position
+ // of the last '1' before the consecutive '0's, it must
+ // be adjusted to the start position of the consecutive '0's.
+ // 2)the start address of the consecutive '0's is just the start of
+ // the bitarray. so no need to adjust the values of (FoundBytePos,FoundBitPos).
+ //
+ if ((MemoryHeader->BitArrayPtr[0] & BIT0) != 0) {
+ FoundBitPos += 1;
+ }
+ //
+ // Have the (FoundBytePos,FoundBitPos) make sense.
+ //
+ if (FoundBitPos > 7) {
+ FoundBytePos += 1;
+ FoundBitPos -= 8;
+ }
+ //
+ // Set the memory as allocated
+ //
+ for (TempBytePos = FoundBytePos, Index = FoundBitPos, Count = 0; Count < NumberOfMemoryUnit; Count++) {
+
+ MemoryHeader->BitArrayPtr[TempBytePos] = (UINT8) (MemoryHeader->BitArrayPtr[TempBytePos] | (1 << Index));
+ Index++;
+ if (Index == 8) {
+ TempBytePos += 1;
+ Index = 0;
+ }
+ }
+
+ *Pool = MemoryHeader->MemoryBlockPtr + (FoundBytePos * 8 + FoundBitPos) * 32;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Uhci Free Pool.
+
+ @param UhcDev The UHCI device.
+ @param Pool A pointer to store the buffer address.
+ @param AllocSize The size of the pool to be freed.
+
+**/
+VOID
+UhcFreePool (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 *Pool,
+ IN UINTN AllocSize
+ )
+{
+ MEMORY_MANAGE_HEADER *MemoryHeader;
+ MEMORY_MANAGE_HEADER *TempHeaderPtr;
+ UINTN StartBytePos;
+ UINTN Index;
+ UINT8 StartBitPos;
+ UINT8 Index2;
+ UINTN Count;
+ UINTN RealAllocSize;
+
+ MemoryHeader = UhcDev->Header1;
+
+ //
+ // allocate unit is 32 byte (align on 32 byte)
+ //
+ if ((AllocSize & 0x1F) != 0) {
+ RealAllocSize = (AllocSize / 32 + 1) * 32;
+ } else {
+ RealAllocSize = AllocSize;
+ }
+
+ for (TempHeaderPtr = MemoryHeader; TempHeaderPtr != NULL;
+ TempHeaderPtr = TempHeaderPtr->Next) {
+
+ if ((Pool >= TempHeaderPtr->MemoryBlockPtr) &&
+ ((Pool + RealAllocSize) <= (TempHeaderPtr->MemoryBlockPtr +
+ TempHeaderPtr->MemoryBlockSizeInBytes))) {
+
+ //
+ // Pool is in the Memory Block area,
+ // find the start byte and bit in the bit array
+ //
+ StartBytePos = ((Pool - TempHeaderPtr->MemoryBlockPtr) / 32) / 8;
+ StartBitPos = (UINT8) (((Pool - TempHeaderPtr->MemoryBlockPtr) / 32) % 8);
+
+ //
+ // reset associated bits in bit arry
+ //
+ for (Index = StartBytePos, Index2 = StartBitPos, Count = 0; Count < (RealAllocSize / 32); Count++) {
+
+ TempHeaderPtr->BitArrayPtr[Index] = (UINT8) (TempHeaderPtr->BitArrayPtr[Index] ^ (1 << Index2));
+ Index2++;
+ if (Index2 == 8) {
+ Index += 1;
+ Index2 = 0;
+ }
+ }
+ //
+ // break the loop
+ //
+ break;
+ }
+ }
+
+}
+
+/**
+ Insert a new memory header into list.
+
+ @param MemoryHeader A pointer to the memory header list.
+ @param NewMemoryHeader A new memory header to be inserted into the list.
+
+**/
+VOID
+InsertMemoryHeaderToList (
+ IN MEMORY_MANAGE_HEADER *MemoryHeader,
+ IN MEMORY_MANAGE_HEADER *NewMemoryHeader
+ )
+{
+ MEMORY_MANAGE_HEADER *TempHeaderPtr;
+
+ for (TempHeaderPtr = MemoryHeader; TempHeaderPtr != NULL; TempHeaderPtr = TempHeaderPtr->Next) {
+ if (TempHeaderPtr->Next == NULL) {
+ TempHeaderPtr->Next = NewMemoryHeader;
+ break;
+ }
+ }
+}
+
+/**
+ Judge the memory block in the memory header is empty or not.
+
+ @param MemoryHeaderPtr A pointer to the memory header list.
+
+ @retval Whether the memory block in the memory header is empty or not.
+
+**/
+BOOLEAN
+IsMemoryBlockEmptied (
+ IN MEMORY_MANAGE_HEADER *MemoryHeaderPtr
+ )
+{
+ UINTN Index;
+
+ for (Index = 0; Index < MemoryHeaderPtr->BitArraySizeInBytes; Index++) {
+ if (MemoryHeaderPtr->BitArrayPtr[Index] != 0) {
+ return FALSE;
+ }
+ }
+
+ return TRUE;
+}
+
+/**
+ remove a memory header from list.
+
+ @param FirstMemoryHeader A pointer to the memory header list.
+ @param FreeMemoryHeader A memory header to be removed into the list.
+
+**/
+VOID
+DelinkMemoryBlock (
+ IN MEMORY_MANAGE_HEADER *FirstMemoryHeader,
+ IN MEMORY_MANAGE_HEADER *FreeMemoryHeader
+ )
+{
+ MEMORY_MANAGE_HEADER *TempHeaderPtr;
+
+ if ((FirstMemoryHeader == NULL) || (FreeMemoryHeader == NULL)) {
+ return ;
+ }
+
+ for (TempHeaderPtr = FirstMemoryHeader; TempHeaderPtr != NULL; TempHeaderPtr = TempHeaderPtr->Next) {
+
+ if (TempHeaderPtr->Next == FreeMemoryHeader) {
+ //
+ // Link the before and after
+ //
+ TempHeaderPtr->Next = FreeMemoryHeader->Next;
+ break;
+ }
+ }
+}
diff --git a/Core/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h b/Core/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h new file mode 100644 index 0000000000..460db7eab9 --- /dev/null +++ b/Core/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h @@ -0,0 +1,1333 @@ +/** @file
+Private Header file for Usb Host Controller PEIM
+
+Copyright (c) 2006 - 2013, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _RECOVERY_UHC_H_
+#define _RECOVERY_UHC_H_
+
+
+#include <PiPei.h>
+
+#include <Ppi/UsbController.h>
+#include <Ppi/UsbHostController.h>
+
+#include <Library/DebugLib.h>
+#include <Library/PeimEntryPoint.h>
+#include <Library/PeiServicesLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/TimerLib.h>
+#include <Library/IoLib.h>
+#include <Library/PeiServicesLib.h>
+
+#define USB_SLOW_SPEED_DEVICE 0x01
+#define USB_FULL_SPEED_DEVICE 0x02
+
+//
+// One memory block uses 16 page
+//
+#define NORMAL_MEMORY_BLOCK_UNIT_IN_PAGES 16
+
+#define USBCMD 0 /* Command Register Offset 00-01h */
+#define USBCMD_RS BIT0 /* Run/Stop */
+#define USBCMD_HCRESET BIT1 /* Host reset */
+#define USBCMD_GRESET BIT2 /* Global reset */
+#define USBCMD_EGSM BIT3 /* Global Suspend Mode */
+#define USBCMD_FGR BIT4 /* Force Global Resume */
+#define USBCMD_SWDBG BIT5 /* SW Debug mode */
+#define USBCMD_CF BIT6 /* Config Flag (sw only) */
+#define USBCMD_MAXP BIT7 /* Max Packet (0 = 32, 1 = 64) */
+
+/* Status register */
+#define USBSTS 2 /* Status Register Offset 02-03h */
+#define USBSTS_USBINT BIT0 /* Interrupt due to IOC */
+#define USBSTS_ERROR BIT1 /* Interrupt due to error */
+#define USBSTS_RD BIT2 /* Resume Detect */
+#define USBSTS_HSE BIT3 /* Host System Error - basically PCI problems */
+#define USBSTS_HCPE BIT4 /* Host Controller Process Error - the scripts were buggy */
+#define USBSTS_HCH BIT5 /* HC Halted */
+
+/* Interrupt enable register */
+#define USBINTR 4 /* Interrupt Enable Register 04-05h */
+#define USBINTR_TIMEOUT BIT0 /* Timeout/CRC error enable */
+#define USBINTR_RESUME BIT1 /* Resume interrupt enable */
+#define USBINTR_IOC BIT2 /* Interrupt On Complete enable */
+#define USBINTR_SP BIT3 /* Short packet interrupt enable */
+
+/* Frame Number Register Offset 06-08h */
+#define USBFRNUM 6
+
+/* Frame List Base Address Register Offset 08-0Bh */
+#define USBFLBASEADD 8
+
+/* Start of Frame Modify Register Offset 0Ch */
+#define USBSOF 0x0c
+
+/* USB port status and control registers */
+#define USBPORTSC1 0x10 /*Port 1 offset 10-11h */
+#define USBPORTSC2 0x12 /*Port 2 offset 12-13h */
+
+#define USBPORTSC_CCS BIT0 /* Current Connect Status ("device present") */
+#define USBPORTSC_CSC BIT1 /* Connect Status Change */
+#define USBPORTSC_PED BIT2 /* Port Enable / Disable */
+#define USBPORTSC_PEDC BIT3 /* Port Enable / Disable Change */
+#define USBPORTSC_LSL BIT4 /* Line Status Low bit*/
+#define USBPORTSC_LSH BIT5 /* Line Status High bit*/
+#define USBPORTSC_RD BIT6 /* Resume Detect */
+#define USBPORTSC_LSDA BIT8 /* Low Speed Device Attached */
+#define USBPORTSC_PR BIT9 /* Port Reset */
+#define USBPORTSC_SUSP BIT12 /* Suspend */
+
+#define SETUP_PACKET_ID 0x2D
+#define INPUT_PACKET_ID 0x69
+#define OUTPUT_PACKET_ID 0xE1
+#define ERROR_PACKET_ID 0x55
+
+#define STALL_1_MICRO_SECOND 1
+#define STALL_1_MILLI_SECOND 1000
+
+
+#pragma pack(1)
+
+typedef struct {
+ UINT32 FrameListPtrTerminate : 1;
+ UINT32 FrameListPtrQSelect : 1;
+ UINT32 FrameListRsvd : 2;
+ UINT32 FrameListPtr : 28;
+} FRAMELIST_ENTRY;
+
+typedef struct {
+ UINT32 QHHorizontalTerminate : 1;
+ UINT32 QHHorizontalQSelect : 1;
+ UINT32 QHHorizontalRsvd : 2;
+ UINT32 QHHorizontalPtr : 28;
+ UINT32 QHVerticalTerminate : 1;
+ UINT32 QHVerticalQSelect : 1;
+ UINT32 QHVerticalRsvd : 2;
+ UINT32 QHVerticalPtr : 28;
+} QUEUE_HEAD;
+
+typedef struct {
+ QUEUE_HEAD QueueHead;
+ UINT32 Reserved1;
+ UINT32 Reserved2;
+ VOID *PtrNext;
+ VOID *PtrDown;
+ VOID *Reserved3;
+ UINT32 Reserved4;
+} QH_STRUCT;
+
+typedef struct {
+ UINT32 TDLinkPtrTerminate : 1;
+ UINT32 TDLinkPtrQSelect : 1;
+ UINT32 TDLinkPtrDepthSelect : 1;
+ UINT32 TDLinkPtrRsvd : 1;
+ UINT32 TDLinkPtr : 28;
+ UINT32 TDStatusActualLength : 11;
+ UINT32 TDStatusRsvd : 5;
+ UINT32 TDStatus : 8;
+ UINT32 TDStatusIOC : 1;
+ UINT32 TDStatusIOS : 1;
+ UINT32 TDStatusLS : 1;
+ UINT32 TDStatusErr : 2;
+ UINT32 TDStatusSPD : 1;
+ UINT32 TDStatusRsvd2 : 2;
+ UINT32 TDTokenPID : 8;
+ UINT32 TDTokenDevAddr : 7;
+ UINT32 TDTokenEndPt : 4;
+ UINT32 TDTokenDataToggle : 1;
+ UINT32 TDTokenRsvd : 1;
+ UINT32 TDTokenMaxLen : 11;
+ UINT32 TDBufferPtr;
+} TD;
+
+typedef struct {
+ TD TDData;
+ UINT8 *PtrTDBuffer;
+ VOID *PtrNextTD;
+ VOID *PtrNextQH;
+ UINT16 TDBufferLength;
+ UINT16 Reserved;
+} TD_STRUCT;
+
+#pragma pack()
+
+typedef struct _MEMORY_MANAGE_HEADER MEMORY_MANAGE_HEADER;
+
+struct _MEMORY_MANAGE_HEADER {
+ UINT8 *BitArrayPtr;
+ UINTN BitArraySizeInBytes;
+ UINT8 *MemoryBlockPtr;
+ UINTN MemoryBlockSizeInBytes;
+ MEMORY_MANAGE_HEADER *Next;
+};
+
+#define USB_UHC_DEV_SIGNATURE SIGNATURE_32 ('p', 'u', 'h', 'c')
+typedef struct {
+ UINTN Signature;
+ PEI_USB_HOST_CONTROLLER_PPI UsbHostControllerPpi;
+ EFI_PEI_PPI_DESCRIPTOR PpiDescriptor;
+
+ UINT32 UsbHostControllerBaseAddress;
+ FRAMELIST_ENTRY *FrameListEntry;
+ QH_STRUCT *ConfigQH;
+ QH_STRUCT *BulkQH;
+ //
+ // Header1 used for QH,TD memory blocks management
+ //
+ MEMORY_MANAGE_HEADER *Header1;
+
+} USB_UHC_DEV;
+
+#define PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS(a) CR (a, USB_UHC_DEV, UsbHostControllerPpi, USB_UHC_DEV_SIGNATURE)
+
+/**
+ Submits control transfer to a target USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param DeviceAddress The target device address.
+ @param DeviceSpeed Target device speed.
+ @param MaximumPacketLength Maximum packet size the default control transfer
+ endpoint is capable of sending or receiving.
+ @param Request USB device request to send.
+ @param TransferDirection Specifies the data direction for the data stage.
+ @param Data Data buffer to be transmitted or received from USB device.
+ @param DataLength The size (in bytes) of the data buffer.
+ @param TimeOut Indicates the maximum timeout, in millisecond.
+ @param TransferResult Return the result of this control transfer.
+
+ @retval EFI_SUCCESS Transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resources.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_TIMEOUT Transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR Transfer failed due to host controller or device error.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcControlTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI * This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINT8 MaximumPacketLength,
+ IN EFI_USB_DEVICE_REQUEST * Request,
+ IN EFI_USB_DATA_DIRECTION TransferDirection,
+ IN OUT VOID *Data OPTIONAL,
+ IN OUT UINTN *DataLength OPTIONAL,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ );
+
+/**
+ Submits bulk transfer to a bulk endpoint of a USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param DeviceAddress Target device address.
+ @param EndPointAddress Endpoint number and its direction in bit 7.
+ @param MaximumPacketLength Maximum packet size the endpoint is capable of
+ sending or receiving.
+ @param Data Array of pointers to the buffers of data to transmit
+ from or receive into.
+ @param DataLength The lenght of the data buffer.
+ @param DataToggle On input, the initial data toggle for the transfer;
+ On output, it is updated to to next data toggle to use of
+ the subsequent bulk transfer.
+ @param TimeOut Indicates the maximum time, in millisecond, which the
+ transfer is allowed to complete.
+ @param TransferResult A pointer to the detailed result information of the
+ bulk transfer.
+
+ @retval EFI_SUCCESS The transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource.
+ @retval EFI_INVALID_PARAMETER Parameters are invalid.
+ @retval EFI_TIMEOUT The transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR The transfer failed due to host controller error.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcBulkTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 MaximumPacketLength,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN OUT UINT8 *DataToggle,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ );
+
+/**
+ Retrieves the number of root hub ports.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB_HOST_CONTROLLER_PPI.
+ @param[out] PortNumber The pointer to the number of the root hub ports.
+
+ @retval EFI_SUCCESS The port number was retrieved successfully.
+ @retval EFI_INVALID_PARAMETER PortNumber is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcGetRootHubPortNumber (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ OUT UINT8 *PortNumber
+ );
+
+/**
+ Retrieves the current status of a USB root hub port.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param PortNumber The root hub port to retrieve the state from.
+ @param PortStatus Variable to receive the port state.
+
+ @retval EFI_SUCCESS The status of the USB root hub port specified.
+ by PortNumber was returned in PortStatus.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcGetRootHubPortStatus (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ OUT EFI_USB_PORT_STATUS *PortStatus
+ );
+
+/**
+ Sets a feature for the specified root hub port.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI
+ @param PortNumber Root hub port to set.
+ @param PortFeature Feature to set.
+
+ @retval EFI_SUCCESS The feature specified by PortFeature was set.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+ @retval EFI_TIMEOUT The time out occurred.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcSetRootHubPortFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ );
+
+/**
+ Clears a feature for the specified root hub port.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param PortNumber Specifies the root hub port whose feature
+ is requested to be cleared.
+ @param PortFeature Indicates the feature selector associated with the
+ feature clear request.
+
+ @retval EFI_SUCCESS The feature specified by PortFeature was cleared
+ for the USB root hub port specified by PortNumber.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcClearRootHubPortFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ );
+
+/**
+ Initialize UHCI.
+
+ @param UhcDev UHCI Device.
+
+ @retval EFI_SUCCESS UHCI successfully initialized.
+ @retval EFI_OUT_OF_RESOURCES Resource can not be allocated.
+
+**/
+EFI_STATUS
+InitializeUsbHC (
+ IN USB_UHC_DEV *UhcDev
+ );
+
+/**
+ Create Frame List Structure.
+
+ @param UhcDev UHCI device.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+CreateFrameList (
+ USB_UHC_DEV *UhcDev
+ );
+
+/**
+ Read a 16bit width data from Uhc HC IO space register.
+
+ @param UhcDev The UHCI device.
+ @param Port The IO space address of the register.
+
+ @retval the register content read.
+
+**/
+UINT16
+USBReadPortW (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Port
+ );
+
+/**
+ Write a 16bit width data into Uhc HC IO space register.
+
+ @param UhcDev The UHCI device.
+ @param Port The IO space address of the register.
+ @param Data The data written into the register.
+
+**/
+VOID
+USBWritePortW (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Port,
+ IN UINT16 Data
+ );
+
+/**
+ Write a 32bit width data into Uhc HC IO space register.
+
+ @param UhcDev The UHCI device.
+ @param Port The IO space address of the register.
+ @param Data The data written into the register.
+
+**/
+VOID
+USBWritePortDW (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Port,
+ IN UINT32 Data
+ );
+
+/**
+ Clear the content of UHCI's Status Register.
+
+ @param UhcDev The UHCI device.
+ @param StatusAddr The IO space address of the register.
+
+**/
+VOID
+ClearStatusReg (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 StatusAddr
+ );
+
+/**
+ Check whether the host controller operates well.
+
+ @param UhcDev The UHCI device.
+ @param StatusRegAddr The io address of status register.
+
+ @retval TRUE Host controller is working.
+ @retval FALSE Host controller is halted or system error.
+
+**/
+BOOLEAN
+IsStatusOK (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 StatusRegAddr
+ );
+
+/**
+ Get Current Frame Number.
+
+ @param UhcDev The UHCI device.
+ @param FrameNumberAddr The address of frame list register.
+
+ @retval The content of the frame list register.
+
+**/
+UINT16
+GetCurrentFrameNumber (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 FrameNumberAddr
+ );
+
+/**
+ Set Frame List Base Address.
+
+ @param UhcDev The UHCI device.
+ @param FrameListRegAddr The address of frame list register.
+ @param Addr The address of frame list table.
+
+**/
+VOID
+SetFrameListBaseAddress (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 FrameListRegAddr,
+ IN UINT32 Addr
+ );
+
+/**
+ Create QH and initialize.
+
+ @param UhcDev The UHCI device.
+ @param PtrQH Place to store QH_STRUCT pointer.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+CreateQH (
+ IN USB_UHC_DEV *UhcDev,
+ OUT QH_STRUCT **PtrQH
+ );
+
+/**
+ Set the horizontal link pointer in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param PtrNext Place to the next QH_STRUCT.
+
+**/
+VOID
+SetQHHorizontalLinkPtr (
+ IN QH_STRUCT *PtrQH,
+ IN VOID *PtrNext
+ );
+
+/**
+ Get the horizontal link pointer in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+
+ @retval The horizontal link pointer in QH.
+
+**/
+VOID *
+GetQHHorizontalLinkPtr (
+ IN QH_STRUCT *PtrQH
+ );
+
+/**
+ Set a QH or TD horizontally to be connected with a specific QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsQH Specify QH or TD is connected.
+
+**/
+VOID
+SetQHHorizontalQHorTDSelect (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsQH
+ );
+
+/**
+ Set the horizontal validor bit in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsValid Specify the horizontal linker is valid or not.
+
+**/
+VOID
+SetQHHorizontalValidorInvalid (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsValid
+ );
+
+/**
+ Set the vertical link pointer in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param PtrNext Place to the next QH_STRUCT.
+
+**/
+VOID
+SetQHVerticalLinkPtr (
+ IN QH_STRUCT *PtrQH,
+ IN VOID *PtrNext
+ );
+
+/**
+ Set a QH or TD vertically to be connected with a specific QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsQH Specify QH or TD is connected.
+
+**/
+VOID
+SetQHVerticalQHorTDSelect (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsQH
+ );
+
+/**
+ Set the vertical validor bit in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsValid Specify the vertical linker is valid or not.
+
+**/
+VOID
+SetQHVerticalValidorInvalid (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsValid
+ );
+
+/**
+ Get the vertical validor bit in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+
+ @retval The vertical linker is valid or not.
+
+**/
+BOOLEAN
+GetQHHorizontalValidorInvalid (
+ IN QH_STRUCT *PtrQH
+ );
+
+/**
+ Allocate TD or QH Struct.
+
+ @param UhcDev The UHCI device.
+ @param Size The size of allocation.
+ @param PtrStruct Place to store TD_STRUCT pointer.
+
+ @return EFI_SUCCESS Allocate successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+AllocateTDorQHStruct (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Size,
+ OUT VOID **PtrStruct
+ );
+
+/**
+ Create a TD Struct.
+
+ @param UhcDev The UHCI device.
+ @param PtrTD Place to store TD_STRUCT pointer.
+
+ @return EFI_SUCCESS Allocate successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+CreateTD (
+ IN USB_UHC_DEV *UhcDev,
+ OUT TD_STRUCT **PtrTD
+ );
+
+/**
+ Generate Setup Stage TD.
+
+ @param UhcDev The UHCI device.
+ @param DevAddr Device address.
+ @param Endpoint Endpoint number.
+ @param DeviceSpeed Device Speed.
+ @param DevRequest Device reuquest.
+ @param RequestLen Request length.
+ @param PtrTD TD_STRUCT generated.
+
+ @return EFI_SUCCESS Generate setup stage TD successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+GenSetupStageTD (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 DevAddr,
+ IN UINT8 Endpoint,
+ IN UINT8 DeviceSpeed,
+ IN UINT8 *DevRequest,
+ IN UINT8 RequestLen,
+ OUT TD_STRUCT **PtrTD
+ );
+
+/**
+ Generate Data Stage TD.
+
+ @param UhcDev The UHCI device.
+ @param DevAddr Device address.
+ @param Endpoint Endpoint number.
+ @param PtrData Data buffer.
+ @param Len Data length.
+ @param PktID PacketID.
+ @param Toggle Data toggle value.
+ @param DeviceSpeed Device Speed.
+ @param PtrTD TD_STRUCT generated.
+
+ @return EFI_SUCCESS Generate data stage TD successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+GenDataTD (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 DevAddr,
+ IN UINT8 Endpoint,
+ IN UINT8 *PtrData,
+ IN UINT8 Len,
+ IN UINT8 PktID,
+ IN UINT8 Toggle,
+ IN UINT8 DeviceSpeed,
+ OUT TD_STRUCT **PtrTD
+ );
+
+/**
+ Generate Status Stage TD.
+
+ @param UhcDev The UHCI device.
+ @param DevAddr Device address.
+ @param Endpoint Endpoint number.
+ @param PktID PacketID.
+ @param DeviceSpeed Device Speed.
+ @param PtrTD TD_STRUCT generated.
+
+ @return EFI_SUCCESS Generate status stage TD successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+CreateStatusTD (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 DevAddr,
+ IN UINT8 Endpoint,
+ IN UINT8 PktID,
+ IN UINT8 DeviceSpeed,
+ OUT TD_STRUCT **PtrTD
+ );
+
+/**
+ Set the link pointer validor bit in TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsValid Specify the linker pointer is valid or not.
+
+**/
+VOID
+SetTDLinkPtrValidorInvalid (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsValid
+ );
+
+/**
+ Set the Link Pointer pointing to a QH or TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsQH Specify QH or TD is connected.
+
+**/
+VOID
+SetTDLinkPtrQHorTDSelect (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsQH
+ );
+
+/**
+ Set the traverse is depth-first or breadth-first.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsDepth Specify the traverse is depth-first or breadth-first.
+
+**/
+VOID
+SetTDLinkPtrDepthorBreadth (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsDepth
+ );
+
+/**
+ Set TD Link Pointer in TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param PtrNext Place to the next TD_STRUCT.
+
+**/
+VOID
+SetTDLinkPtr (
+ IN TD_STRUCT *PtrTDStruct,
+ IN VOID *PtrNext
+ );
+
+/**
+ Get TD Link Pointer.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval Get TD Link Pointer in TD.
+
+**/
+VOID*
+GetTDLinkPtr (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Get the information about whether the Link Pointer field pointing to
+ a QH or a TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval whether the Link Pointer field pointing to a QH or a TD.
+
+**/
+BOOLEAN
+IsTDLinkPtrQHOrTD (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Enable/Disable short packet detection mechanism.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsEnable Enable or disable short packet detection mechanism.
+
+**/
+VOID
+EnableorDisableTDShortPacket (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsEnable
+ );
+
+/**
+ Set the max error counter in TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param MaxErrors The number of allowable error.
+
+**/
+VOID
+SetTDControlErrorCounter (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINT8 MaxErrors
+ );
+
+/**
+ Set the TD is targeting a low-speed device or not.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsLowSpeedDevice Whether The device is low-speed.
+
+**/
+VOID
+SetTDLoworFullSpeedDevice (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsLowSpeedDevice
+ );
+
+/**
+ Set the TD is isochronous transfer type or not.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsIsochronous Whether the transaction isochronous transfer type.
+
+**/
+VOID
+SetTDControlIsochronousorNot (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsIsochronous
+ );
+
+/**
+ Set if UCHI should issue an interrupt on completion of the frame
+ in which this TD is executed
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsSet Whether HC should issue an interrupt on completion.
+
+**/
+VOID
+SetorClearTDControlIOC (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsSet
+ );
+
+/**
+ Set if the TD is active and can be executed.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsActive Whether the TD is active and can be executed.
+
+**/
+VOID
+SetTDStatusActiveorInactive (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsActive
+ );
+
+/**
+ Specifies the maximum number of data bytes allowed for the transfer.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param MaxLen The maximum number of data bytes allowed.
+
+ @retval The allowed maximum number of data.
+**/
+UINT16
+SetTDTokenMaxLength (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINT16 MaxLen
+ );
+
+/**
+ Set the data toggle bit to DATA1.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+**/
+VOID
+SetTDTokenDataToggle1 (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Set the data toggle bit to DATA0.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+**/
+VOID
+SetTDTokenDataToggle0 (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Set EndPoint Number the TD is targeting at.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param EndPoint The Endport number of the target.
+
+**/
+VOID
+SetTDTokenEndPoint (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINTN EndPoint
+ );
+
+/**
+ Set Device Address the TD is targeting at.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param DevAddr The Device Address of the target.
+
+**/
+VOID
+SetTDTokenDeviceAddress (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINTN DevAddr
+ );
+
+/**
+ Set Packet Identification the TD is targeting at.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param PacketID The Packet Identification of the target.
+
+**/
+VOID
+SetTDTokenPacketID (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINT8 PacketID
+ );
+
+/**
+ Set the beginning address of the data buffer that will be used
+ during the transaction.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+**/
+VOID
+SetTDDataBuffer (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Detect whether the TD is active.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The TD is active or not.
+
+**/
+BOOLEAN
+IsTDStatusActive (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Detect whether the TD is stalled.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The TD is stalled or not.
+
+**/
+BOOLEAN
+IsTDStatusStalled (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Detect whether Data Buffer Error is happened.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The Data Buffer Error is happened or not.
+
+**/
+BOOLEAN
+IsTDStatusBufferError (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Detect whether Babble Error is happened.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The Babble Error is happened or not.
+
+**/
+BOOLEAN
+IsTDStatusBabbleError (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Detect whether NAK is received.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The NAK is received or not.
+
+**/
+BOOLEAN
+IsTDStatusNAKReceived (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Detect whether CRC/Time Out Error is encountered.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The CRC/Time Out Error is encountered or not.
+
+**/
+BOOLEAN
+IsTDStatusCRCTimeOutError (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Detect whether Bitstuff Error is received.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The Bitstuff Error is received or not.
+
+**/
+BOOLEAN
+IsTDStatusBitStuffError (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Retrieve the actual number of bytes that were tansferred.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The actual number of bytes that were tansferred.
+
+**/
+UINT16
+GetTDStatusActualLength (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Retrieve the information of whether the Link Pointer field is valid or not.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The linker pointer field is valid or not.
+
+**/
+BOOLEAN
+GetTDLinkPtrValidorInvalid (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Count TD Number from PtrFirstTD.
+
+ @param PtrFirstTD Place to store TD_STRUCT pointer.
+
+ @retval The queued TDs number.
+
+**/
+UINTN
+CountTDsNumber (
+ IN TD_STRUCT *PtrFirstTD
+ );
+
+/**
+ Link TD To QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param PtrTD Place to store TD_STRUCT pointer.
+
+**/
+VOID
+LinkTDToQH (
+ IN QH_STRUCT *PtrQH,
+ IN TD_STRUCT *PtrTD
+ );
+
+/**
+ Link TD To TD.
+
+ @param PtrPreTD Place to store TD_STRUCT pointer.
+ @param PtrTD Place to store TD_STRUCT pointer.
+
+**/
+VOID
+LinkTDToTD (
+ IN TD_STRUCT *PtrPreTD,
+ IN TD_STRUCT *PtrTD
+ );
+
+/**
+ Execute Control Transfer.
+
+ @param UhcDev The UCHI device.
+ @param PtrTD A pointer to TD_STRUCT data.
+ @param ActualLen Actual transfer Length.
+ @param TimeOut TimeOut value.
+ @param TransferResult Transfer Result.
+
+ @return EFI_DEVICE_ERROR The transfer failed due to transfer error.
+ @return EFI_TIMEOUT The transfer failed due to time out.
+ @return EFI_SUCCESS The transfer finished OK.
+
+**/
+EFI_STATUS
+ExecuteControlTransfer (
+ IN USB_UHC_DEV *UhcDev,
+ IN TD_STRUCT *PtrTD,
+ OUT UINTN *ActualLen,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ );
+
+/**
+ Execute Bulk Transfer.
+
+ @param UhcDev The UCHI device.
+ @param PtrTD A pointer to TD_STRUCT data.
+ @param ActualLen Actual transfer Length.
+ @param DataToggle DataToggle value.
+ @param TimeOut TimeOut value.
+ @param TransferResult Transfer Result.
+
+ @return EFI_DEVICE_ERROR The transfer failed due to transfer error.
+ @return EFI_TIMEOUT The transfer failed due to time out.
+ @return EFI_SUCCESS The transfer finished OK.
+
+**/
+EFI_STATUS
+ExecBulkTransfer (
+ IN USB_UHC_DEV *UhcDev,
+ IN TD_STRUCT *PtrTD,
+ IN OUT UINTN *ActualLen,
+ IN UINT8 *DataToggle,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ );
+
+/**
+ Delete Queued TDs.
+
+ @param UhcDev The UCHI device.
+ @param PtrFirstTD Place to store TD_STRUCT pointer.
+
+**/
+VOID
+DeleteQueuedTDs (
+ IN USB_UHC_DEV *UhcDev,
+ IN TD_STRUCT *PtrFirstTD
+ );
+
+/**
+ Check TDs Results.
+
+ @param PtrTD A pointer to TD_STRUCT data.
+ @param Result The result to return.
+ @param ErrTDPos The Error TD position.
+ @param ActualTransferSize Actual transfer size.
+
+ @retval The TD is executed successfully or not.
+
+**/
+BOOLEAN
+CheckTDsResults (
+ IN TD_STRUCT *PtrTD,
+ OUT UINT32 *Result,
+ OUT UINTN *ErrTDPos,
+ OUT UINTN *ActualTransferSize
+ );
+
+/**
+ Create Memory Block.
+
+ @param UhcDev The UCHI device.
+ @param MemoryHeader The Pointer to allocated memory block.
+ @param MemoryBlockSizeInPages The page size of memory block to be allocated.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+CreateMemoryBlock (
+ IN USB_UHC_DEV *UhcDev,
+ OUT MEMORY_MANAGE_HEADER **MemoryHeader,
+ IN UINTN MemoryBlockSizeInPages
+ );
+
+/**
+ Initialize UHCI memory management.
+
+ @param UhcDev The UCHI device.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+InitializeMemoryManagement (
+ IN USB_UHC_DEV *UhcDev
+ );
+
+/**
+ Initialize UHCI memory management.
+
+ @param UhcDev The UCHI device.
+ @param Pool Buffer pointer to store the buffer pointer.
+ @param AllocSize The size of the pool to be allocated.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+UhcAllocatePool (
+ IN USB_UHC_DEV *UhcDev,
+ OUT UINT8 **Pool,
+ IN UINTN AllocSize
+ );
+
+/**
+ Alloc Memory In MemoryBlock.
+
+ @param MemoryHeader The pointer to memory manage header.
+ @param Pool Buffer pointer to store the buffer pointer.
+ @param NumberOfMemoryUnit The size of the pool to be allocated.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+AllocMemInMemoryBlock (
+ IN MEMORY_MANAGE_HEADER *MemoryHeader,
+ OUT VOID **Pool,
+ IN UINTN NumberOfMemoryUnit
+ );
+
+/**
+ Uhci Free Pool.
+
+ @param UhcDev The UHCI device.
+ @param Pool A pointer to store the buffer address.
+ @param AllocSize The size of the pool to be freed.
+
+**/
+VOID
+UhcFreePool (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 *Pool,
+ IN UINTN AllocSize
+ );
+
+/**
+ Insert a new memory header into list.
+
+ @param MemoryHeader A pointer to the memory header list.
+ @param NewMemoryHeader A new memory header to be inserted into the list.
+
+**/
+VOID
+InsertMemoryHeaderToList (
+ IN MEMORY_MANAGE_HEADER *MemoryHeader,
+ IN MEMORY_MANAGE_HEADER *NewMemoryHeader
+ );
+
+/**
+ Judge the memory block in the memory header is empty or not.
+
+ @param MemoryHeaderPtr A pointer to the memory header list.
+
+ @retval Whether the memory block in the memory header is empty or not.
+
+**/
+BOOLEAN
+IsMemoryBlockEmptied (
+ IN MEMORY_MANAGE_HEADER *MemoryHeaderPtr
+ );
+
+/**
+ remove a memory header from list.
+
+ @param FirstMemoryHeader A pointer to the memory header list.
+ @param FreeMemoryHeader A memory header to be removed into the list.
+
+**/
+VOID
+DelinkMemoryBlock (
+ IN MEMORY_MANAGE_HEADER *FirstMemoryHeader,
+ IN MEMORY_MANAGE_HEADER *FreeMemoryHeader
+ );
+
+#endif
diff --git a/Core/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.inf b/Core/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.inf new file mode 100644 index 0000000000..7baa07612d --- /dev/null +++ b/Core/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.inf @@ -0,0 +1,64 @@ +## @file
+# The UhcPeim driver is responsible for managing the behavior of UHCI controller at PEI phase.
+#
+# It produces gPeiUsbHostControllerPpiGuid based on gPeiUsbControllerPpiGuid which is used
+# to enable recovery function from USB Drivers.
+#
+# Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions
+# of the BSD License which accompanies this distribution. The
+# full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = UhciPei
+ MODULE_UNI_FILE = UhciPei.uni
+ FILE_GUID = C463CEAC-FC57-4f36-88B7-356C750C3BCA
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+
+ ENTRY_POINT = UhcPeimEntry
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+#
+
+[Sources]
+ UhcPeim.c
+ UhcPeim.h
+
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+
+[LibraryClasses]
+ IoLib
+ TimerLib
+ BaseMemoryLib
+ PeiServicesLib
+ PeimEntryPoint
+ DebugLib
+
+
+[Ppis]
+ gPeiUsbHostControllerPpiGuid ## PRODUCES
+ gPeiUsbControllerPpiGuid ## CONSUMES
+
+
+[Depex]
+ gEfiPeiMemoryDiscoveredPpiGuid AND gPeiUsbControllerPpiGuid AND gEfiPeiBootInRecoveryModePpiGuid
+
+[UserExtensions.TianoCore."ExtraFiles"]
+ UhciPeiExtra.uni
diff --git a/Core/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.uni b/Core/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.uni Binary files differnew file mode 100644 index 0000000000..b3cfb23139 --- /dev/null +++ b/Core/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.uni diff --git a/Core/MdeModulePkg/Bus/Pci/UhciPei/UhciPeiExtra.uni b/Core/MdeModulePkg/Bus/Pci/UhciPei/UhciPeiExtra.uni Binary files differnew file mode 100644 index 0000000000..5cde35591a --- /dev/null +++ b/Core/MdeModulePkg/Bus/Pci/UhciPei/UhciPeiExtra.uni |