diff options
Diffstat (limited to 'EdkModulePkg/Bus/Usb/UsbCbi')
| -rw-r--r-- | EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/Cbi0.c | 1025 | ||||
| -rw-r--r-- | EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/ComponentName.c | 179 | ||||
| -rw-r--r-- | EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/UsbCbi0.msa | 84 | ||||
| -rw-r--r-- | EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/cbi.h | 94 | ||||
| -rw-r--r-- | EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/ComponentName.c | 181 | ||||
| -rw-r--r-- | EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/UsbCbi1.msa | 84 | ||||
| -rw-r--r-- | EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/cbi.h | 94 | ||||
| -rw-r--r-- | EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/cbi1.c | 850 |
8 files changed, 0 insertions, 2591 deletions
diff --git a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/Cbi0.c b/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/Cbi0.c deleted file mode 100644 index 73b89406bd..0000000000 --- a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/Cbi0.c +++ /dev/null @@ -1,1025 +0,0 @@ -/*++
-
-Copyright (c) 2006, Intel Corporation
-All rights reserved. This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-Module Name:
-
- Cbi0.c
-
-Abstract:
-
---*/
-
-#include "cbi.h"
-
-//
-// Bot Driver Binding Protocol
-//
-STATIC
-EFI_STATUS
-EFIAPI
-Cbi0DriverBindingSupported (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- );
-
-STATIC
-EFI_STATUS
-EFIAPI
-Cbi0DriverBindingStart (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- );
-
-STATIC
-EFI_STATUS
-EFIAPI
-Cbi0DriverBindingStop (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN UINTN NumberOfChildren,
- IN EFI_HANDLE *ChildHandleBuffer
- );
-
-STATIC
-VOID
-Cbi0ReportStatusCode (
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value
- );
-
-
-EFI_DRIVER_BINDING_PROTOCOL gUsbCbi0DriverBinding = {
- Cbi0DriverBindingSupported,
- Cbi0DriverBindingStart,
- Cbi0DriverBindingStop,
- 0xa,
- NULL,
- NULL
-};
-
-STATIC
-EFI_STATUS
-Cbi0RecoveryReset (
- IN USB_CBI_DEVICE *UsbCbiDev
- );
-
-STATIC
-EFI_STATUS
-Cbi0CommandPhase (
- IN USB_CBI_DEVICE *UsbCbiDev,
- IN VOID *Command,
- IN UINT8 CommandSize,
- IN UINT16 Timeout
- );
-
-STATIC
-EFI_STATUS
-Cbi0DataPhase (
- IN USB_CBI_DEVICE *UsbCbiDev,
- IN UINT32 *DataSize,
- IN OUT VOID *DataBuffer,
- IN EFI_USB_DATA_DIRECTION Direction,
- IN UINT16 Timeout
- );
-
-STATIC
-EFI_STATUS
-Cbi0StatusPhase (
- IN USB_CBI_DEVICE *UsbCbiDev,
- OUT INTERRUPT_DATA_BLOCK *InterruptDataBlock,
- IN UINT16 Timeout
- );
-
-//
-// USB Atapi protocol prototype
-//
-STATIC
-EFI_STATUS
-EFIAPI
-Cbi0AtapiCommand (
- IN EFI_USB_ATAPI_PROTOCOL *This,
- IN VOID *Command,
- IN UINT8 CommandSize,
- IN VOID *DataBuffer,
- IN UINT32 BufferLength,
- IN EFI_USB_DATA_DIRECTION Direction,
- IN UINT16 TimeOutInMilliSeconds
- );
-
-STATIC
-EFI_STATUS
-EFIAPI
-Cbi0MassStorageReset (
- IN EFI_USB_ATAPI_PROTOCOL *This,
- IN BOOLEAN ExtendedVerification
- );
-
-STATIC EFI_USB_ATAPI_PROTOCOL Cbi0AtapiProtocol = {
- Cbi0AtapiCommand,
- Cbi0MassStorageReset,
- 0
-};
-
-STATIC
-EFI_STATUS
-EFIAPI
-Cbi0DriverBindingSupported (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-/*++
-
- Routine Description:
- Test to see if this driver supports ControllerHandle. Any ControllerHandle
- than contains a BlockIo and DiskIo protocol can be supported.
-
- Arguments:
- This - Protocol instance pointer.
- ControllerHandle - Handle of device to test
- RemainingDevicePath - Not used
-
- Returns:
- EFI_SUCCESS - This driver supports this device
- EFI_ALREADY_STARTED - This driver is already running on this device
- other - This driver does not support this device
-
---*/
-{
- EFI_STATUS Status;
- EFI_USB_IO_PROTOCOL *UsbIo;
- EFI_USB_INTERFACE_DESCRIPTOR InterfaceDescriptor;
-
- //
- // Check if the Controller supports USB IO protocol
- //
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiUsbIoProtocolGuid,
- (VOID **) &UsbIo,
- This->DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Get the Default interface descriptor, now we only
- // suppose interface 1
- //
- Status = UsbIo->UsbGetInterfaceDescriptor (
- UsbIo,
- &InterfaceDescriptor
- );
- if (EFI_ERROR (Status)) {
- gBS->CloseProtocol (
- ControllerHandle,
- &gEfiUsbIoProtocolGuid,
- This->DriverBindingHandle,
- ControllerHandle
- );
- return Status;
- }
- //
- // Check if it is a Cbi0 Type Mass Storage Device
- //
- if((InterfaceDescriptor.InterfaceClass != MASS_STORAGE_CLASS) ||
- (InterfaceDescriptor.InterfaceProtocol != CBI0_INTERFACE_PROTOCOL)) {
- Status = EFI_UNSUPPORTED;
- } else {
- Status = EFI_SUCCESS;
- }
-
- gBS->CloseProtocol (
- ControllerHandle,
- &gEfiUsbIoProtocolGuid,
- This->DriverBindingHandle,
- ControllerHandle
- );
-
- return Status;
-}
-
-STATIC
-EFI_STATUS
-EFIAPI
-Cbi0DriverBindingStart (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-/*++
-
- Routine Description:
- Start this driver on ControllerHandle by opening a Block IO and Disk IO
- protocol, reading Device Path, and creating a child handle with a
- Disk IO and device path protocol.
-
- Arguments:
- This - Protocol instance pointer.
- ControllerHandle - Handle of device to bind driver to
- RemainingDevicePath - Not used
-
- Returns:
- EFI_SUCCESS - This driver is added to DeviceHandle
- EFI_ALREADY_STARTED - This driver is already running on DeviceHandle
- other - This driver does not support this device
- EFI_OUT_OF_RESOURCES- Can't allocate memory
- EFI_UNSUPPORTED - Endpoint is not as expected
---*/
-{
- USB_CBI_DEVICE *UsbCbiDev;
- UINT8 Index;
- EFI_USB_ENDPOINT_DESCRIPTOR EndpointDescriptor;
- EFI_USB_INTERFACE_DESCRIPTOR InterfaceDescriptor;
- EFI_STATUS Status;
- EFI_USB_IO_PROTOCOL *UsbIo;
- UINT8 EndpointExistMask;
-
- //
- // Check if the Controller supports USB IO protocol
- //
- UsbCbiDev = NULL;
-
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiUsbIoProtocolGuid,
- (VOID **) &UsbIo,
- This->DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Get the controller interface descriptor
- //
- Status = UsbIo->UsbGetInterfaceDescriptor (
- UsbIo,
- &InterfaceDescriptor
- );
- if (EFI_ERROR (Status)) {
- gBS->CloseProtocol (
- ControllerHandle,
- &gEfiUsbIoProtocolGuid,
- This->DriverBindingHandle,
- ControllerHandle
- );
- return Status;
- }
-
- Cbi0AtapiProtocol.CommandProtocol = InterfaceDescriptor.InterfaceSubClass;
-
- UsbCbiDev = AllocateZeroPool (sizeof (USB_CBI_DEVICE));
- if (UsbCbiDev == NULL) {
- gBS->CloseProtocol (
- ControllerHandle,
- &gEfiUsbIoProtocolGuid,
- This->DriverBindingHandle,
- ControllerHandle
- );
- return EFI_OUT_OF_RESOURCES;
- }
-
- UsbCbiDev->Signature = USB_CBI_DEVICE_SIGNATURE;
- UsbCbiDev->UsbIo = UsbIo;
- CopyMem (&UsbCbiDev->InterfaceDescriptor, &InterfaceDescriptor, sizeof (InterfaceDescriptor));
- CopyMem (&UsbCbiDev->UsbAtapiProtocol, &Cbi0AtapiProtocol, sizeof (Cbi0AtapiProtocol));
-
- //
- // Get the Device Path Protocol on Controller's handle
- //
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiDevicePathProtocolGuid,
- (VOID **) &UsbCbiDev->DevicePath,
- This->DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
-
- if (EFI_ERROR (Status)) {
- gBS->CloseProtocol (
- ControllerHandle,
- &gEfiUsbIoProtocolGuid,
- This->DriverBindingHandle,
- ControllerHandle
- );
- if (UsbCbiDev != NULL) {
- gBS->FreePool (UsbCbiDev);
- }
-
- return Status;
- }
- //
- // Mask used to see whether all three kinds of endpoints exist,
- // Mask value:
- // bit0: bulk in endpoint;
- // bit1: bulk out endpoint;
- // bit2: interrupt in endpoint;
- //
- EndpointExistMask = 0;
- for (Index = 0; Index < InterfaceDescriptor.NumEndpoints; Index++) {
- UsbIo->UsbGetEndpointDescriptor (
- UsbIo,
- Index,
- &EndpointDescriptor
- );
-
- //
- // We parse bulk endpoint
- //
- if (EndpointDescriptor.Attributes == 0x02) {
- if (EndpointDescriptor.EndpointAddress & 0x80) {
- CopyMem (&UsbCbiDev->BulkInEndpointDescriptor, &EndpointDescriptor, sizeof (EndpointDescriptor));
- EndpointExistMask |= bit (0);
- } else {
- CopyMem (&UsbCbiDev->BulkOutEndpointDescriptor, &EndpointDescriptor, sizeof (EndpointDescriptor));
- EndpointExistMask |= bit (1);
- }
- }
- //
- // We parse interrupt endpoint
- //
- if (EndpointDescriptor.Attributes == 0x03) {
- CopyMem (&UsbCbiDev->InterruptEndpointDescriptor, &EndpointDescriptor, sizeof (EndpointDescriptor));
- EndpointExistMask |= bit (2);
- }
-
- }
- //
- // Double check we have all endpoints needed
- //
- if (EndpointExistMask != (bit (0) | bit (1) | bit (2))) {
- gBS->CloseProtocol (
- ControllerHandle,
- &gEfiUsbIoProtocolGuid,
- This->DriverBindingHandle,
- ControllerHandle
- );
- if (UsbCbiDev != NULL) {
- gBS->FreePool (UsbCbiDev);
- }
-
- return EFI_UNSUPPORTED;
- }
- //
- // After installing Usb-Atapi protocol onto this handle
- // it will be called by upper layer drivers such as Fat
- //
- Cbi0ReportStatusCode (
- UsbCbiDev->DevicePath,
- EFI_PROGRESS_CODE,
- (EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_PC_ENABLE)
- );
-
- Status = gBS->InstallProtocolInterface (
- &ControllerHandle,
- &gEfiUsbAtapiProtocolGuid,
- EFI_NATIVE_INTERFACE,
- &UsbCbiDev->UsbAtapiProtocol
- );
- if (EFI_ERROR (Status)) {
- gBS->CloseProtocol (
- ControllerHandle,
- &gEfiUsbIoProtocolGuid,
- This->DriverBindingHandle,
- ControllerHandle
- );
- if (UsbCbiDev != NULL) {
- gBS->FreePool (UsbCbiDev);
- }
-
- return Status;
- }
-
- UsbCbiDev->ControllerNameTable = NULL;
- AddUnicodeString (
- "eng",
- gUsbCbi0ComponentName.SupportedLanguages,
- &UsbCbiDev->ControllerNameTable,
- (CHAR16 *) L"Usb Cbi0 Mass Storage"
- );
-
- return EFI_SUCCESS;
-}
-
-STATIC
-EFI_STATUS
-EFIAPI
-Cbi0DriverBindingStop (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN UINTN NumberOfChildren,
- IN EFI_HANDLE *ChildHandleBuffer
- )
-/*++
-
- Routine Description:
- Stop this driver on ControllerHandle. Support stoping any child handles
- created by this driver.
-
- Arguments:
- This - Protocol instance pointer.
- ControllerHandle - Handle of device to stop driver on
- NumberOfChildren - Number of Children in the ChildHandleBuffer
- ChildHandleBuffer - List of handles for the children we need to stop.
-
- Returns:
- EFI_SUCCESS - This driver is removed DeviceHandle
- EFI_UNSUPPORTED - This driver was not removed from this device
-
---*/
-{
- EFI_STATUS Status;
- EFI_USB_ATAPI_PROTOCOL *Cbi0AtapiProtocol;
- USB_CBI_DEVICE *UsbCbiDev;
-
- //
- // Get our context back.
- //
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiUsbAtapiProtocolGuid,
- (VOID **) &Cbi0AtapiProtocol,
- This->DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (EFI_ERROR (Status)) {
- return EFI_UNSUPPORTED;
- }
-
- UsbCbiDev = USB_CBI_DEVICE_FROM_THIS (Cbi0AtapiProtocol);
-
- Cbi0ReportStatusCode (
- UsbCbiDev->DevicePath,
- EFI_PROGRESS_CODE,
- (EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_PC_DISABLE)
- );
-
- //
- // Uninstall protocol
- //
- Status = gBS->UninstallProtocolInterface (
- ControllerHandle,
- &gEfiUsbAtapiProtocolGuid,
- &UsbCbiDev->UsbAtapiProtocol
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Status = gBS->CloseProtocol (
- ControllerHandle,
- &gEfiUsbIoProtocolGuid,
- This->DriverBindingHandle,
- ControllerHandle
- );
- //
- // Free all allocated resources
- //
- if (UsbCbiDev->ControllerNameTable) {
- FreeUnicodeStringTable (UsbCbiDev->ControllerNameTable);
- }
-
- gBS->FreePool (UsbCbiDev);
-
- return Status;
-}
-
-
-STATIC
-EFI_STATUS
-Cbi0RecoveryReset (
- IN USB_CBI_DEVICE *UsbCbiDev
- )
-/*++
-
-Routine Description:
-
- Cbi0 Recovery Reset routine
-
-Arguments:
-
- UsbCbiDev - Cbi0RecoveryReset
-
-Returns:
-
- EFI_SUCCESS - Success
-
---*/
-{
- UINT8 ResetCommand[12];
- EFI_STATUS Status;
- EFI_USB_IO_PROTOCOL *UsbIo;
- UINT8 EndpointAddress;
- UINT32 Result;
- UINT16 Timeout;
-
- UsbIo = UsbCbiDev->UsbIo;
-
- Cbi0ReportStatusCode (
- UsbCbiDev->DevicePath,
- EFI_PROGRESS_CODE,
- (EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_PC_RESET)
- );
- //
- // CBI reset command protocol
- //
- SetMem (ResetCommand, sizeof (ResetCommand), 0xff);
- ResetCommand[0] = 0x1d;
- ResetCommand[1] = 0x04;
-
- //
- // (in millisecond unit)
- //
- Timeout = STALL_1_SECOND;
-
- Status = Cbi0AtapiCommand (
- &UsbCbiDev->UsbAtapiProtocol,
- ResetCommand,
- 12,
- NULL,
- 0,
- EfiUsbNoData,
- Timeout
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- gBS->Stall (100 * 1000);
- //
- // clear bulk in endpoint stall feature
- //
- EndpointAddress = UsbCbiDev->BulkInEndpointDescriptor.EndpointAddress;
- Status = UsbClearEndpointHalt (
- UsbIo,
- EndpointAddress,
- &Result
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // clear bulk out endpoint stall feature
- //
- EndpointAddress = UsbCbiDev->BulkOutEndpointDescriptor.EndpointAddress;
- Status = UsbClearEndpointHalt (
- UsbIo,
- EndpointAddress,
- &Result
- );
- //
- // according to CBI spec, no need to clear interrupt endpoint feature.
- //
- return Status;
-}
-
-STATIC
-EFI_STATUS
-Cbi0CommandPhase (
- IN USB_CBI_DEVICE *UsbCbiDev,
- IN VOID *Command,
- IN UINT8 CommandSize,
- IN UINT16 Timeout
- )
-/*++
-
- Routine Description:
- Send ATAPI command through CBI0 interface.
-
- Arguments:
- UsbCbiDev - USB_CBI_DEVICE
- Command - Command to send
- CommandSize - Command size
- Timeout - Time out value in milliseconds
- Returns:
- EFI_SUCCESS - Success
- EFI_DEVICE_ERROR - Fail
- Others
-
---*/
-{
- EFI_STATUS Status;
- UINT32 Result;
- EFI_USB_IO_PROTOCOL *UsbIo;
- EFI_USB_DEVICE_REQUEST Request;
-
- UsbIo = UsbCbiDev->UsbIo;
-
- ZeroMem (&Request, sizeof (EFI_USB_DEVICE_REQUEST));
-
- //
- // Device request see CBI specification
- //
- Request.RequestType = 0x21;
- Request.Request = 0x00;
- Request.Value = 0;
- Request.Index = 0;
- Request.Length = CommandSize;
-
- Status = UsbIo->UsbControlTransfer (
- UsbIo,
- &Request,
- EfiUsbDataOut,
- Timeout,
- Command,
- CommandSize,
- &Result
- );
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- return EFI_SUCCESS;
-}
-
-STATIC
-EFI_STATUS
-Cbi0DataPhase (
- IN USB_CBI_DEVICE *UsbCbiDev,
- IN UINT32 *DataSize,
- IN OUT VOID *DataBuffer,
- IN EFI_USB_DATA_DIRECTION Direction,
- IN UINT16 Timeout
- )
-/*++
-
- Routine Description:
- Get/Send Data through CBI0 interface
-
- Arguments:
- UsbCbiDev - USB_CBI_DEVICE
- DataSize - Data size
- DataBuffer - Data buffer
- Direction - IN/OUT/NODATA
- Timeout - Time out value in milliseconds
- Returns:
- EFI_SUCCESS
- Others
-
---*/
-{
- EFI_STATUS Status;
- EFI_USB_IO_PROTOCOL *UsbIo;
- UINT8 EndpointAddress;
- UINTN Remain;
- UINTN Increment;
- UINT32 MaxPacketLength;
- UINT8 *BufferPtr;
- UINT32 Result;
- UINTN TransferredSize;
-
- UsbIo = UsbCbiDev->UsbIo;
-
- Remain = *DataSize;
- BufferPtr = (UINT8 *) DataBuffer;
- TransferredSize = 0;
- //
- // retrieve the the max packet length of the given endpoint
- //
- if (Direction == EfiUsbDataIn) {
- MaxPacketLength = UsbCbiDev->BulkInEndpointDescriptor.MaxPacketSize;
- EndpointAddress = UsbCbiDev->BulkInEndpointDescriptor.EndpointAddress;
- } else {
- MaxPacketLength = UsbCbiDev->BulkOutEndpointDescriptor.MaxPacketSize;
- EndpointAddress = UsbCbiDev->BulkOutEndpointDescriptor.EndpointAddress;
- }
-
- while (Remain > 0) {
-
- if (Remain > 16 * MaxPacketLength) {
- Increment = 16 * MaxPacketLength;
- } else {
- Increment = Remain;
- }
-
- Status = UsbIo->UsbBulkTransfer (
- UsbIo,
- EndpointAddress,
- BufferPtr,
- &Increment,
- Timeout,
- &Result
- );
- TransferredSize += Increment;
-
- if (EFI_ERROR (Status)) {
- goto ErrorExit;
- }
-
- BufferPtr += Increment;
- Remain -= Increment;
- }
-
- return EFI_SUCCESS;
-
-ErrorExit:
-
- if (Direction == EfiUsbDataIn) {
- Cbi0ReportStatusCode (
- UsbCbiDev->DevicePath,
- EFI_ERROR_CODE | EFI_ERROR_MINOR,
- (EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_EC_INPUT_ERROR)
- );
- } else {
- Cbi0ReportStatusCode (
- UsbCbiDev->DevicePath,
- EFI_ERROR_CODE | EFI_ERROR_MINOR,
- (EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_EC_OUTPUT_ERROR)
- );
- }
-
- if ((Result & EFI_USB_ERR_STALL) == EFI_USB_ERR_STALL) {
- Status = Cbi0RecoveryReset (UsbCbiDev);
- }
-
- *DataSize = (UINT32) TransferredSize;
- return Status;
-}
-
-STATIC
-EFI_STATUS
-Cbi0StatusPhase (
- IN USB_CBI_DEVICE *UsbCbiDev,
- OUT INTERRUPT_DATA_BLOCK *InterruptDataBlock,
- IN UINT16 Timeout
- )
-/*++
-
- Routine Description:
- Get transfer status through BOT interface
-
- Arguments:
- UsbCbiDev - USB_CBI_DEVICE
- InterruptDataBlock - Interrupt Data Block for interrupt transfer
- Timeout - Time out value in milliseconds
- Returns:
- EFI_SUCCESS
- Others
-
---*/
-{
- UINT8 EndpointAddress;
- UINTN InterruptDataBlockLength;
- UINT32 Result;
- EFI_STATUS Status;
-
- ZeroMem (InterruptDataBlock, sizeof (INTERRUPT_DATA_BLOCK));
-
- EndpointAddress = UsbCbiDev->InterruptEndpointDescriptor.EndpointAddress;
- InterruptDataBlockLength = sizeof (INTERRUPT_DATA_BLOCK);
-
- Status = UsbCbiDev->UsbIo->UsbSyncInterruptTransfer (
- UsbCbiDev->UsbIo,
- EndpointAddress,
- InterruptDataBlock,
- &InterruptDataBlockLength,
- Timeout,
- &Result
- );
- if (EFI_ERROR (Status)) {
- if ((Result & EFI_USB_ERR_STALL) == EFI_USB_ERR_STALL) {
- //
- // just endpoint stall happens
- //
- UsbClearEndpointHalt (
- UsbCbiDev->UsbIo,
- EndpointAddress,
- &Result
- );
- gBS->Stall (100 * 1000);
- }
-
- return Status;
- }
-
- return EFI_SUCCESS;
-}
-//
-// Cbi0 Atapi Protocol Implementation
-//
-STATIC
-EFI_STATUS
-EFIAPI
-Cbi0MassStorageReset (
- IN EFI_USB_ATAPI_PROTOCOL *This,
- IN BOOLEAN ExtendedVerification
- )
-/*++
-
- Routine Description:
- Reset CBI Devices
-
- Arguments:
- This - Protocol instance pointer.
- ExtendedVerification - TRUE if we need to do strictly reset.
-
- Returns:
- EFI_SUCCESS - Command succeeded.
- EFI_DEVICE_ERROR - Command failed.
-
---*/
-{
- EFI_STATUS Status;
- USB_CBI_DEVICE *UsbCbiDev;
-
- UsbCbiDev = USB_CBI_DEVICE_FROM_THIS (This);
-
- if (ExtendedVerification) {
- //
- // UsbIo->UsbPortReset (UsbIo);
- //
- }
-
- Status = Cbi0RecoveryReset (UsbCbiDev);
- return Status;
-}
-
-STATIC
-EFI_STATUS
-EFIAPI
-Cbi0AtapiCommand (
- IN EFI_USB_ATAPI_PROTOCOL *This,
- IN VOID *Command,
- IN UINT8 CommandSize,
- IN VOID *DataBuffer,
- IN UINT32 BufferLength,
- IN EFI_USB_DATA_DIRECTION Direction,
- IN UINT16 TimeOutInMilliSeconds
- )
-/*++
-
- Routine Description:
- Send ATAPI command using BOT protocol.
-
- Arguments:
- This - Protocol instance pointer.
- Command - Command buffer
- CommandSize - Size of Command Buffer
- DataBuffer - Data buffer
- BufferLength - Length of Data buffer
- Direction - Data direction of this command
- TimeOutInMilliSeconds - Timeout value in ms
-
- Returns:
- EFI_SUCCESS - Command succeeded.
- EFI_DEVICE_ERROR - Command failed.
- EFI_INVALID_PARAMETER - Invalidate parameter
---*/
-{
- EFI_STATUS Status;
- USB_CBI_DEVICE *UsbCbiDev;
- UINT32 BufferSize;
- INTERRUPT_DATA_BLOCK InterruptDataBlock;
- EFI_STATUS DataPhaseStatus;
-
- if (Direction != EfiUsbNoData) {
- if (DataBuffer == NULL || BufferLength == 0) {
- return EFI_INVALID_PARAMETER;
- }
- }
-
- DataPhaseStatus = EFI_SUCCESS;
- //
- // Get the context
- //
- UsbCbiDev = USB_CBI_DEVICE_FROM_THIS (This);
-
- //
- // First send ATAPI command through Cbi
- //
- Status = Cbi0CommandPhase (
- UsbCbiDev,
- Command,
- CommandSize,
- TimeOutInMilliSeconds
- );
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
- //
- // Send/Get Data if there is a Data Stage
- //
- switch (Direction) {
-
- case EfiUsbDataIn:
- case EfiUsbDataOut:
- BufferSize = BufferLength;
-
- DataPhaseStatus = Cbi0DataPhase (
- UsbCbiDev,
- &BufferSize,
- DataBuffer,
- Direction,
- TimeOutInMilliSeconds
- );
- break;
-
- case EfiUsbNoData:
- break;
- }
-
- if (EFI_ERROR (DataPhaseStatus)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Status Phase
- //
- Status = Cbi0StatusPhase (
- UsbCbiDev,
- &InterruptDataBlock,
- TimeOutInMilliSeconds
- );
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- if (This->CommandProtocol != EFI_USB_SUBCLASS_UFI) {
-
- if (InterruptDataBlock.bType == 0) {
- //
- // indicates command completion
- //
- switch (InterruptDataBlock.bValue & 0x03) {
-
- case 0:
- Status = EFI_SUCCESS;
- break;
-
- case 1:
- Status = EFI_DEVICE_ERROR;
- break;
-
- case 2:
- Status = Cbi0RecoveryReset (UsbCbiDev);
- if (EFI_ERROR (Status)) {
- UsbCbiDev->UsbIo->UsbPortReset (UsbCbiDev->UsbIo);
- }
-
- Status = EFI_DEVICE_ERROR;
- break;
-
- case 3:
- Status = EFI_DEVICE_ERROR;
- }
- } else {
- Status = DataPhaseStatus;
- }
-
- } else {
- //
- // UFI device, InterruptDataBlock.bType: ASC (Additional Sense Code)
- // InterruptDataBlock.bValue: ASCQ (Additional Snese Code Qualifier)
- //
- Status = DataPhaseStatus;
- }
-
- return Status;
-}
-
-STATIC
-VOID
-Cbi0ReportStatusCode (
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value
- )
-/*++
-
- Routine Description:
- Report Status Code in Usb Cbi0 Driver
-
- Arguments:
- DevicePath - Use this to get Device Path
- CodeType - Status Code Type
- CodeValue - Status Code Value
-
- Returns:
- None
-
---*/
-{
-
- REPORT_STATUS_CODE_WITH_DEVICE_PATH (
- CodeType,
- Value,
- DevicePath
- );
-}
diff --git a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/ComponentName.c b/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/ComponentName.c deleted file mode 100644 index 87ff7d257b..0000000000 --- a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/ComponentName.c +++ /dev/null @@ -1,179 +0,0 @@ -/*++
-
-Copyright (c) 2006, Intel Corporation
-All rights reserved. This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-Module Name:
-
- ComponentName.c
-
-Abstract:
-
---*/
-
-#include "cbi.h"
-
-//
-// EFI Component Name Protocol
-//
-EFI_COMPONENT_NAME_PROTOCOL gUsbCbi0ComponentName = {
- UsbCbi0ComponentNameGetDriverName,
- UsbCbi0ComponentNameGetControllerName,
- "eng"
-};
-
-STATIC EFI_UNICODE_STRING_TABLE mUsbCbi0DriverNameTable[] = {
- { "eng", (CHAR16 *) L"Usb Cbi0 Mass Storage Driver" },
- { NULL , NULL }
-};
-
-
-EFI_STATUS
-EFIAPI
-UsbCbi0ComponentNameGetDriverName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN CHAR8 *Language,
- OUT CHAR16 **DriverName
- )
-/*++
-
- Routine Description:
- Retrieves a Unicode string that is the user readable name of the EFI Driver.
-
- Arguments:
- This - A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.
- Language - A pointer to a three character ISO 639-2 language identifier.
- This is the language of the driver name that that the caller
- is requesting, and it must match one of the languages specified
- in SupportedLanguages. The number of languages supported by a
- driver is up to the driver writer.
- DriverName - A pointer to the Unicode string to return. This Unicode string
- is the name of the driver specified by This in the language
- specified by Language.
-
- Returns:
- EFI_SUCCESS - The Unicode string for the Driver specified by This
- and the language specified by Language was returned
- in DriverName.
- EFI_INVALID_PARAMETER - Language is NULL.
- EFI_INVALID_PARAMETER - DriverName is NULL.
- EFI_UNSUPPORTED - The driver specified by This does not support the
- language specified by Language.
-
---*/
-{
- return LookupUnicodeString (
- Language,
- gUsbCbi0ComponentName.SupportedLanguages,
- mUsbCbi0DriverNameTable,
- DriverName
- );
-}
-
-EFI_STATUS
-EFIAPI
-UsbCbi0ComponentNameGetControllerName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_HANDLE ChildHandle OPTIONAL,
- IN CHAR8 *Language,
- OUT CHAR16 **ControllerName
- )
-/*++
-
- Routine Description:
- Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by an EFI Driver.
-
- Arguments:
- This - A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.
- ControllerHandle - The handle of a controller that the driver specified by
- This is managing. This handle specifies the controller
- whose name is to be returned.
- ChildHandle - The handle of the child controller to retrieve the name
- of. This is an optional parameter that may be NULL. It
- will be NULL for device drivers. It will also be NULL
- for a bus drivers that wish to retrieve the name of the
- bus controller. It will not be NULL for a bus driver
- that wishes to retrieve the name of a child controller.
- Language - A pointer to a three character ISO 639-2 language
- identifier. This is the language of the controller name
- that that the caller is requesting, and it must match one
- of the languages specified in SupportedLanguages. The
- number of languages supported by a driver is up to the
- driver writer.
- ControllerName - A pointer to the Unicode string to return. This Unicode
- string is the name of the controller specified by
- ControllerHandle and ChildHandle in the language specified
- by Language from the point of view of the driver specified
- by This.
-
- Returns:
- EFI_SUCCESS - The Unicode string for the user readable name in the
- language specified by Language for the driver
- specified by This was returned in DriverName.
- EFI_INVALID_PARAMETER - ControllerHandle is not a valid EFI_HANDLE.
- EFI_INVALID_PARAMETER - ChildHandle is not NULL and it is not a valid EFI_HANDLE.
- EFI_INVALID_PARAMETER - Language is NULL.
- EFI_INVALID_PARAMETER - ControllerName is NULL.
- EFI_UNSUPPORTED - The driver specified by This is not currently managing
- the controller specified by ControllerHandle and
- ChildHandle.
- EFI_UNSUPPORTED - The driver specified by This does not support the
- language specified by Language.
-
---*/
-{
- EFI_STATUS Status;
- USB_CBI_DEVICE *UsbCbiDev;
- EFI_USB_ATAPI_PROTOCOL *UsbAtapi;
-
- //
- // This is a device driver, so ChildHandle must be NULL.
- //
- if (ChildHandle != NULL) {
- return EFI_UNSUPPORTED;
- }
- //
- // Make sure this driver is currently managing ControllerHandle
- //
- Status = EfiTestManagedDevice (
- ControllerHandle,
- gUsbCbi0DriverBinding.DriverBindingHandle,
- &gEfiUsbIoProtocolGuid
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Get the device context
- //
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiUsbAtapiProtocolGuid,
- (VOID **) &UsbAtapi,
- gUsbCbi0DriverBinding.DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- UsbCbiDev = USB_CBI_DEVICE_FROM_THIS (UsbAtapi);
-
- return LookupUnicodeString (
- Language,
- gUsbCbi0ComponentName.SupportedLanguages,
- UsbCbiDev->ControllerNameTable,
- ControllerName
- );
-
-}
diff --git a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/UsbCbi0.msa b/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/UsbCbi0.msa deleted file mode 100644 index ad8e9f202e..0000000000 --- a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/UsbCbi0.msa +++ /dev/null @@ -1,84 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<ModuleSurfaceArea xmlns="http://www.TianoCore.org/2006/Edk2.0">
- <MsaHeader>
- <ModuleName>UsbCbi0</ModuleName>
- <ModuleType>DXE_DRIVER</ModuleType>
- <GuidValue>A3527D16-E6CC-42f5-BADB-BF3DE177742B</GuidValue>
- <Version>1.0</Version>
- <Abstract>Component description file for UsbCbi0 module</Abstract>
- <Description>This module provides support for USB Control-Bulk-Interrupt Protocol with command completion interrupt</Description>
- <Copyright>Copyright (c) 2006, Intel Corporation</Copyright>
- <License>All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.</License>
- <Specification>FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052</Specification>
- </MsaHeader>
- <ModuleDefinitions>
- <SupportedArchitectures>IA32 X64 IPF EBC</SupportedArchitectures>
- <BinaryModule>false</BinaryModule>
- <OutputFileBasename>UsbCbi0</OutputFileBasename>
- </ModuleDefinitions>
- <LibraryClassDefinitions>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>DebugLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>UefiDriverModelLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>UefiDriverEntryPoint</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>BaseLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>UefiLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>BaseMemoryLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>EdkUsbLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>ReportStatusCodeLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>MemoryAllocationLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>UefiBootServicesTableLib</Keyword>
- </LibraryClass>
- </LibraryClassDefinitions>
- <SourceFiles>
- <Filename>cbi.h</Filename>
- <Filename>Cbi0.c</Filename>
- <Filename>ComponentName.c</Filename>
- </SourceFiles>
- <PackageDependencies>
- <Package PackageGuid="5e0e9358-46b6-4ae2-8218-4ab8b9bbdcec"/>
- <Package PackageGuid="68169ab0-d41b-4009-9060-292c253ac43d"/>
- </PackageDependencies>
- <Protocols>
- <Protocol Usage="TO_START">
- <ProtocolCName>gEfiDevicePathProtocolGuid</ProtocolCName>
- </Protocol>
- <Protocol Usage="TO_START">
- <ProtocolCName>gEfiUsbIoProtocolGuid</ProtocolCName>
- </Protocol>
- <Protocol Usage="BY_START">
- <ProtocolCName>gEfiUsbAtapiProtocolGuid</ProtocolCName>
- </Protocol>
- </Protocols>
- <Externs>
- <Specification>EFI_SPECIFICATION_VERSION 0x00020000</Specification>
- <Specification>EDK_RELEASE_VERSION 0x00020000</Specification>
- <Extern>
- <DriverBinding>gUsbCbi0DriverBinding</DriverBinding>
- <ComponentName>gUsbCbi0ComponentName</ComponentName>
- </Extern>
- </Externs>
-</ModuleSurfaceArea>
diff --git a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/cbi.h b/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/cbi.h deleted file mode 100644 index d312176cac..0000000000 --- a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi0/cbi.h +++ /dev/null @@ -1,94 +0,0 @@ -/*++
-
-Copyright (c) 2006, Intel Corporation
-All rights reserved. This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-Module Name:
-
- cbi.h
-
-Abstract:
-
- USB CBI transportation protocol definitions.
---*/
-
-#ifndef _CBI_H
-#define _CBI_H
-
-
-#include <IndustryStandard/Usb.h>
-
-#define bit(a) (1 << (a))
-
-#define MASS_STORAGE_CLASS 0x08
-#define CBI0_INTERFACE_PROTOCOL 0x00
-#define CBI1_INTERFACE_PROTOCOL 0x01
-
-//
-// in millisecond unit
-//
-#define STALL_1_SECOND 1000
-
-#pragma pack(1)
-//
-// Data block definition for transportation through interrupt endpoint
-//
-typedef struct {
- UINT8 bType;
- UINT8 bValue;
-} INTERRUPT_DATA_BLOCK;
-
-#pragma pack()
-
-#define USB_CBI_DEVICE_SIGNATURE EFI_SIGNATURE_32 ('u', 'c', 'b', 'i')
-
-//
-// Device structure for CBI, interrupt endpoint may be not used in
-// CBI1 Protocol
-//
-typedef struct {
- UINT32 Signature;
- EFI_DEVICE_PATH_PROTOCOL *DevicePath;
- EFI_USB_ATAPI_PROTOCOL UsbAtapiProtocol;
- EFI_USB_IO_PROTOCOL *UsbIo;
- EFI_USB_INTERFACE_DESCRIPTOR InterfaceDescriptor;
- EFI_USB_ENDPOINT_DESCRIPTOR BulkInEndpointDescriptor;
- EFI_USB_ENDPOINT_DESCRIPTOR BulkOutEndpointDescriptor;
- EFI_USB_ENDPOINT_DESCRIPTOR InterruptEndpointDescriptor;
- EFI_UNICODE_STRING_TABLE *ControllerNameTable;
-} USB_CBI_DEVICE;
-
-#define USB_CBI_DEVICE_FROM_THIS(a) \
- CR(a, USB_CBI_DEVICE, UsbAtapiProtocol, USB_CBI_DEVICE_SIGNATURE)
-
-extern EFI_COMPONENT_NAME_PROTOCOL gUsbCbi0ComponentName;
-extern EFI_DRIVER_BINDING_PROTOCOL gUsbCbi0DriverBinding;
-
-//
-// EFI Component Name Functions
-//
-EFI_STATUS
-EFIAPI
-UsbCbi0ComponentNameGetDriverName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN CHAR8 *Language,
- OUT CHAR16 **DriverName
- );
-
-EFI_STATUS
-EFIAPI
-UsbCbi0ComponentNameGetControllerName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_HANDLE ChildHandle OPTIONAL,
- IN CHAR8 *Language,
- OUT CHAR16 **ControllerName
- );
-
-#endif
diff --git a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/ComponentName.c b/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/ComponentName.c deleted file mode 100644 index 316c7f4c55..0000000000 --- a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/ComponentName.c +++ /dev/null @@ -1,181 +0,0 @@ -/*++
-
-Copyright (c) 2006, Intel Corporation
-All rights reserved. This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-Module Name:
-
- ComponentName.c
-
-Abstract:
-
---*/
-
-#include "cbi.h"
-
-//
-// EFI Component Name Protocol
-//
-EFI_COMPONENT_NAME_PROTOCOL gUsbCbi1ComponentName = {
- UsbCbi1ComponentNameGetDriverName,
- UsbCbi1ComponentNameGetControllerName,
- "eng"
-};
-
-STATIC EFI_UNICODE_STRING_TABLE mUsbCbi1DriverNameTable[] = {
- { "eng", (CHAR16 *) L"Usb Cbi1 Mass Storage Driver" },
- { NULL , NULL }
-};
-
-
-EFI_STATUS
-EFIAPI
-UsbCbi1ComponentNameGetDriverName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN CHAR8 *Language,
- OUT CHAR16 **DriverName
- )
-/*++
-
- Routine Description:
- Retrieves a Unicode string that is the user readable name of the EFI Driver.
-
- Arguments:
- This - A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.
- Language - A pointer to a three character ISO 639-2 language identifier.
- This is the language of the driver name that that the caller
- is requesting, and it must match one of the languages specified
- in SupportedLanguages. The number of languages supported by a
- driver is up to the driver writer.
- DriverName - A pointer to the Unicode string to return. This Unicode string
- is the name of the driver specified by This in the language
- specified by Language.
-
- Returns:
- EFI_SUCCESS - The Unicode string for the Driver specified by This
- and the language specified by Language was returned
- in DriverName.
- EFI_INVALID_PARAMETER - Language is NULL.
- EFI_INVALID_PARAMETER - DriverName is NULL.
- EFI_UNSUPPORTED - The driver specified by This does not support the
- language specified by Language.
-
---*/
-{
- return LookupUnicodeString (
- Language,
- gUsbCbi1ComponentName.SupportedLanguages,
- mUsbCbi1DriverNameTable,
- DriverName
- );
-}
-
-EFI_STATUS
-EFIAPI
-UsbCbi1ComponentNameGetControllerName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_HANDLE ChildHandle OPTIONAL,
- IN CHAR8 *Language,
- OUT CHAR16 **ControllerName
- )
-/*++
-
- Routine Description:
- Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by an EFI Driver.
-
- Arguments:
- This - A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.
- ControllerHandle - The handle of a controller that the driver specified by
- This is managing. This handle specifies the controller
- whose name is to be returned.
- ChildHandle - The handle of the child controller to retrieve the name
- of. This is an optional parameter that may be NULL. It
- will be NULL for device drivers. It will also be NULL
- for a bus drivers that wish to retrieve the name of the
- bus controller. It will not be NULL for a bus driver
- that wishes to retrieve the name of a child controller.
- Language - A pointer to a three character ISO 639-2 language
- identifier. This is the language of the controller name
- that that the caller is requesting, and it must match one
- of the languages specified in SupportedLanguages. The
- number of languages supported by a driver is up to the
- driver writer.
- ControllerName - A pointer to the Unicode string to return. This Unicode
- string is the name of the controller specified by
- ControllerHandle and ChildHandle in the language specified
- by Language from the point of view of the driver specified
- by This.
-
- Returns:
- EFI_SUCCESS - The Unicode string for the user readable name in the
- language specified by Language for the driver
- specified by This was returned in DriverName.
- EFI_INVALID_PARAMETER - ControllerHandle is not a valid EFI_HANDLE.
- EFI_INVALID_PARAMETER - ChildHandle is not NULL and it is not a valid EFI_HANDLE.
- EFI_INVALID_PARAMETER - Language is NULL.
- EFI_INVALID_PARAMETER - ControllerName is NULL.
- EFI_UNSUPPORTED - The driver specified by This is not currently managing
- the controller specified by ControllerHandle and
- ChildHandle.
- EFI_UNSUPPORTED - The driver specified by This does not support the
- language specified by Language.
-
---*/
-{
- EFI_STATUS Status;
- USB_CBI_DEVICE *UsbCbiDev;
- EFI_USB_ATAPI_PROTOCOL *UsbAtapi;
-
- //
- // This is a device driver, so ChildHandle must be NULL.
- //
- if (ChildHandle != NULL) {
- return EFI_UNSUPPORTED;
- }
-
- //
- // Make sure this driver is currently managing ControllerHandle
- //
- Status = EfiTestManagedDevice (
- ControllerHandle,
- gUsbCbi1DriverBinding.DriverBindingHandle,
- &gEfiUsbIoProtocolGuid
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Get the device context
- //
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiUsbAtapiProtocolGuid,
- (VOID **) &UsbAtapi,
- gUsbCbi1DriverBinding.DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- UsbCbiDev = USB_CBI_DEVICE_FROM_THIS (UsbAtapi);
-
- return LookupUnicodeString (
- Language,
- gUsbCbi1ComponentName.SupportedLanguages,
- UsbCbiDev->ControllerNameTable,
- ControllerName
- );
-
-}
diff --git a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/UsbCbi1.msa b/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/UsbCbi1.msa deleted file mode 100644 index 2a0a86b8ae..0000000000 --- a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/UsbCbi1.msa +++ /dev/null @@ -1,84 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<ModuleSurfaceArea xmlns="http://www.TianoCore.org/2006/Edk2.0">
- <MsaHeader>
- <ModuleName>UsbCbi1</ModuleName>
- <ModuleType>DXE_DRIVER</ModuleType>
- <GuidValue>B40612B2-A063-11d4-9A3A-0090273FC14D</GuidValue>
- <Version>1.0</Version>
- <Abstract>Component description file for UsbCbi1 module</Abstract>
- <Description>This module provides support for USB Control-Bulk-Interrupt Protocol with no command completion interrupt</Description>
- <Copyright>Copyright (c) 2006, Intel Corporation</Copyright>
- <License>All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.</License>
- <Specification>FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052</Specification>
- </MsaHeader>
- <ModuleDefinitions>
- <SupportedArchitectures>IA32 X64 IPF EBC</SupportedArchitectures>
- <BinaryModule>false</BinaryModule>
- <OutputFileBasename>UsbCbi1</OutputFileBasename>
- </ModuleDefinitions>
- <LibraryClassDefinitions>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>DebugLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>UefiDriverModelLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>UefiDriverEntryPoint</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>BaseLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>UefiLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>BaseMemoryLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>EdkUsbLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>ReportStatusCodeLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>MemoryAllocationLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>UefiBootServicesTableLib</Keyword>
- </LibraryClass>
- </LibraryClassDefinitions>
- <SourceFiles>
- <Filename>cbi.h</Filename>
- <Filename>cbi1.c</Filename>
- <Filename>ComponentName.c</Filename>
- </SourceFiles>
- <PackageDependencies>
- <Package PackageGuid="5e0e9358-46b6-4ae2-8218-4ab8b9bbdcec"/>
- <Package PackageGuid="68169ab0-d41b-4009-9060-292c253ac43d"/>
- </PackageDependencies>
- <Protocols>
- <Protocol Usage="TO_START">
- <ProtocolCName>gEfiDevicePathProtocolGuid</ProtocolCName>
- </Protocol>
- <Protocol Usage="TO_START">
- <ProtocolCName>gEfiUsbIoProtocolGuid</ProtocolCName>
- </Protocol>
- <Protocol Usage="BY_START">
- <ProtocolCName>gEfiUsbAtapiProtocolGuid</ProtocolCName>
- </Protocol>
- </Protocols>
- <Externs>
- <Specification>EFI_SPECIFICATION_VERSION 0x00020000</Specification>
- <Specification>EDK_RELEASE_VERSION 0x00020000</Specification>
- <Extern>
- <DriverBinding>gUsbCbi1DriverBinding</DriverBinding>
- <ComponentName>gUsbCbi1ComponentName</ComponentName>
- </Extern>
- </Externs>
-</ModuleSurfaceArea>
diff --git a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/cbi.h b/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/cbi.h deleted file mode 100644 index 77daa1a29b..0000000000 --- a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/cbi.h +++ /dev/null @@ -1,94 +0,0 @@ -/*++
-
-Copyright (c) 2006, Intel Corporation
-All rights reserved. This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-Module Name:
-
- cbi.h
-
-Abstract:
-
- USB CBI transportation protocol definitions.
---*/
-
-#ifndef _CBI_H
-#define _CBI_H
-
-
-#include <IndustryStandard/Usb.h>
-
-#define bit(a) (1 << (a))
-
-#define MASS_STORAGE_CLASS 0x08
-#define CBI0_INTERFACE_PROTOCOL 0x00
-#define CBI1_INTERFACE_PROTOCOL 0x01
-
-//
-// in millisecond unit
-//
-#define STALL_1_SECOND 1000
-
-#pragma pack(1)
-//
-// Data block definition for transportation through interrupt endpoint
-//
-typedef struct {
- UINT8 bType;
- UINT8 bValue;
-} INTERRUPT_DATA_BLOCK;
-
-#pragma pack()
-
-#define USB_CBI_DEVICE_SIGNATURE EFI_SIGNATURE_32 ('u', 'c', 'b', 'i')
-
-//
-// Device structure for CBI, interrupt endpoint may be not used in
-// CBI1 Protocol
-//
-typedef struct {
- UINT32 Signature;
- EFI_DEVICE_PATH_PROTOCOL *DevicePath;
- EFI_USB_ATAPI_PROTOCOL UsbAtapiProtocol;
- EFI_USB_IO_PROTOCOL *UsbIo;
- EFI_USB_INTERFACE_DESCRIPTOR InterfaceDescriptor;
- EFI_USB_ENDPOINT_DESCRIPTOR BulkInEndpointDescriptor;
- EFI_USB_ENDPOINT_DESCRIPTOR BulkOutEndpointDescriptor;
- EFI_USB_ENDPOINT_DESCRIPTOR InterruptEndpointDescriptor;
- EFI_UNICODE_STRING_TABLE *ControllerNameTable;
-} USB_CBI_DEVICE;
-
-#define USB_CBI_DEVICE_FROM_THIS(a) \
- CR(a, USB_CBI_DEVICE, UsbAtapiProtocol, USB_CBI_DEVICE_SIGNATURE)
-
-extern EFI_DRIVER_BINDING_PROTOCOL gUsbCbi1DriverBinding;
-extern EFI_COMPONENT_NAME_PROTOCOL gUsbCbi1ComponentName;
-
-//
-// EFI Component Name Functions
-//
-EFI_STATUS
-EFIAPI
-UsbCbi1ComponentNameGetDriverName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN CHAR8 *Language,
- OUT CHAR16 **DriverName
- );
-
-EFI_STATUS
-EFIAPI
-UsbCbi1ComponentNameGetControllerName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_HANDLE ChildHandle OPTIONAL,
- IN CHAR8 *Language,
- OUT CHAR16 **ControllerName
- );
-
-#endif
diff --git a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/cbi1.c b/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/cbi1.c deleted file mode 100644 index d98d022a54..0000000000 --- a/EdkModulePkg/Bus/Usb/UsbCbi/Dxe/Cbi1/cbi1.c +++ /dev/null @@ -1,850 +0,0 @@ -/*++
-
-Copyright (c) 2006, Intel Corporation
-All rights reserved. This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-Module Name:
-
- cbi1.c
-
-Abstract:
- cbi1 transportation protocol implementation files
-
---*/
-
-#include "cbi.h"
-
-//
-// CBI Function prototypes
-//
-STATIC
-EFI_STATUS
-CBI1CommandPhase (
- IN USB_CBI_DEVICE *UsbCbiDev,
- IN VOID *Command,
- IN UINT8 CommandSize,
- OUT UINT32 *Result
- );
-
-STATIC
-EFI_STATUS
-CBI1DataPhase (
- IN USB_CBI_DEVICE *UsbCbiDev,
- IN UINT32 DataSize,
- IN OUT VOID *DataBuffer,
- IN EFI_USB_DATA_DIRECTION Direction,
- IN UINT16 Timeout,
- OUT UINT32 *Result
- );
-
-//
-// USB Atapi implementation
-//
-STATIC
-EFI_STATUS
-EFIAPI
-CBI1AtapiCommand (
- IN EFI_USB_ATAPI_PROTOCOL *This,
- IN VOID *Command,
- IN UINT8 CommandSize,
- IN VOID *DataBuffer,
- IN UINT32 BufferLength,
- IN EFI_USB_DATA_DIRECTION Direction,
- IN UINT16 TimeOutInMilliSeconds
- );
-
-STATIC
-EFI_STATUS
-EFIAPI
-CBI1MassStorageReset (
- IN EFI_USB_ATAPI_PROTOCOL *This,
- IN BOOLEAN ExtendedVerification
- );
-
-//
-// CBI1 Driver Binding Protocol
-//
-STATIC
-EFI_STATUS
-EFIAPI
-CBI1DriverBindingSupported (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- );
-
-STATIC
-EFI_STATUS
-EFIAPI
-CBI1DriverBindingStart (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- );
-
-STATIC
-EFI_STATUS
-EFIAPI
-CBI1DriverBindingStop (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN UINTN NumberOfChildren,
- IN EFI_HANDLE *ChildHandleBuffer
- );
-
-STATIC
-VOID
-Cbi1ReportStatusCode (
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value
- );
-
-
-EFI_DRIVER_BINDING_PROTOCOL gUsbCbi1DriverBinding = {
- CBI1DriverBindingSupported,
- CBI1DriverBindingStart,
- CBI1DriverBindingStop,
- 0xa,
- NULL,
- NULL
-};
-
-STATIC EFI_USB_ATAPI_PROTOCOL CBI1AtapiProtocol = {
- CBI1AtapiCommand,
- CBI1MassStorageReset,
- 0
-};
-
-//
-// CBI1 Driver Binding implementation
-//
-STATIC
-EFI_STATUS
-EFIAPI
-CBI1DriverBindingSupported (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-/*++
-
- Routine Description:
- Test to see if this driver supports ControllerHandle. Any ControllerHandle
- than contains a BlockIo and DiskIo protocol can be supported.
-
- Arguments:
- This - Protocol instance pointer.
- ControllerHandle - Handle of device to test
- RemainingDevicePath - Not used
-
- Returns:
- EFI_SUCCESS - This driver supports this device
- EFI_ALREADY_STARTED - This driver is already running on this device
- other - This driver does not support this device
-
---*/
-{
- EFI_STATUS Status;
- EFI_USB_IO_PROTOCOL *UsbIo;
- EFI_USB_INTERFACE_DESCRIPTOR InterfaceDescriptor;
-
- //
- // Check if the Controller supports USB IO protocol
- //
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiUsbIoProtocolGuid,
- (VOID **) &UsbIo,
- This->DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Get the Controller interface descriptor
- //
- Status = UsbIo->UsbGetInterfaceDescriptor (
- UsbIo,
- &InterfaceDescriptor
- );
- if (EFI_ERROR (Status)) {
- goto Exit;
- }
- //
- // Bug here: just let Vendor specific CBI protocol get supported
- //
- if (!((InterfaceDescriptor.InterfaceClass == 0xFF) &&
- (InterfaceDescriptor.InterfaceProtocol == 0))) {
- Status = EFI_UNSUPPORTED;
- goto Exit;
- }
-
-Exit:
- gBS->CloseProtocol (
- ControllerHandle,
- &gEfiUsbIoProtocolGuid,
- This->DriverBindingHandle,
- ControllerHandle
- );
- return Status;
-
-}
-
-STATIC
-EFI_STATUS
-EFIAPI
-CBI1DriverBindingStart (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-/*++
-
- Routine Description:
- Start this driver on ControllerHandle by opening a Block IO and Disk IO
- protocol, reading Device Path, and creating a child handle with a
- Disk IO and device path protocol.
-
- Arguments:
- This - Protocol instance pointer.
- ControllerHandle - Handle of device to bind driver to
- RemainingDevicePath - Not used
-
- Returns:
- EFI_SUCCESS - This driver is added to DeviceHandle
- EFI_ALREADY_STARTED - This driver is already running on DeviceHandle
- other - This driver does not support this device
-
---*/
-{
- USB_CBI_DEVICE *UsbCbiDev;
- UINT8 Index;
- EFI_USB_ENDPOINT_DESCRIPTOR EndpointDescriptor;
- EFI_USB_INTERFACE_DESCRIPTOR InterfaceDescriptor;
- EFI_STATUS Status;
- EFI_USB_IO_PROTOCOL *UsbIo;
- BOOLEAN Found;
-
- Found = FALSE;
- //
- // Check if the Controller supports USB IO protocol
- //
- UsbCbiDev = NULL;
-
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiUsbIoProtocolGuid,
- (VOID **) &UsbIo,
- This->DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Get the controller interface descriptor
- //
- Status = UsbIo->UsbGetInterfaceDescriptor (
- UsbIo,
- &InterfaceDescriptor
- );
- if (EFI_ERROR (Status)) {
- goto ErrorExit;
- }
-
- CBI1AtapiProtocol.CommandProtocol = InterfaceDescriptor.InterfaceSubClass;
-
- UsbCbiDev = AllocateZeroPool (sizeof (USB_CBI_DEVICE));
- if (UsbCbiDev == NULL) {
- Status = EFI_OUT_OF_RESOURCES;
- goto ErrorExit;
- }
-
- UsbCbiDev->Signature = USB_CBI_DEVICE_SIGNATURE;
- UsbCbiDev->UsbIo = UsbIo;
- CopyMem (&UsbCbiDev->InterfaceDescriptor, &InterfaceDescriptor, sizeof (InterfaceDescriptor));
- CopyMem (&UsbCbiDev->UsbAtapiProtocol , &CBI1AtapiProtocol, sizeof (CBI1AtapiProtocol));
-
- //
- // Get the Device Path Protocol on Controller's handle
- //
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiDevicePathProtocolGuid,
- (VOID **) &UsbCbiDev->DevicePath,
- This->DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
-
- if (EFI_ERROR (Status)) {
- goto ErrorExit;
- }
-
- for (Index = 0; Index < InterfaceDescriptor.NumEndpoints; Index++) {
- UsbIo->UsbGetEndpointDescriptor (
- UsbIo,
- Index,
- &EndpointDescriptor
- );
-
- //
- // We parse bulk endpoint
- //
- if (EndpointDescriptor.Attributes == 0x02) {
- if (EndpointDescriptor.EndpointAddress & 0x80) {
- CopyMem (&UsbCbiDev->BulkInEndpointDescriptor, &EndpointDescriptor, sizeof (EndpointDescriptor));
- } else {
- CopyMem (&UsbCbiDev->BulkOutEndpointDescriptor, &EndpointDescriptor, sizeof (EndpointDescriptor));
- }
-
- Found = TRUE;
- }
- //
- // We parse interrupt endpoint
- //
- if (EndpointDescriptor.Attributes == 0x03) {
- CopyMem (&UsbCbiDev->InterruptEndpointDescriptor, &EndpointDescriptor, sizeof (EndpointDescriptor));
- Found = TRUE;
- }
-
- }
- //
- // Double check we have these
- //
- if (!Found) {
- goto ErrorExit;
- }
- //
- // After installing Usb-Atapi protocol onto this handle
- // it will be called by upper layer drivers such as Fat
- //
- Cbi1ReportStatusCode (
- UsbCbiDev->DevicePath,
- EFI_PROGRESS_CODE,
- (EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_PC_ENABLE)
- );
-
- Status = gBS->InstallProtocolInterface (
- &ControllerHandle,
- &gEfiUsbAtapiProtocolGuid,
- EFI_NATIVE_INTERFACE,
- &UsbCbiDev->UsbAtapiProtocol
- );
-
- if (EFI_ERROR (Status)) {
- goto ErrorExit;
- }
-
- UsbCbiDev->ControllerNameTable = NULL;
- AddUnicodeString (
- "eng",
- gUsbCbi1ComponentName.SupportedLanguages,
- &UsbCbiDev->ControllerNameTable,
- (CHAR16 *) L"Usb Cbi1 Mass Storage"
- );
-
- return EFI_SUCCESS;
-
-ErrorExit:
- gBS->CloseProtocol (
- ControllerHandle,
- &gEfiUsbIoProtocolGuid,
- This->DriverBindingHandle,
- ControllerHandle
- );
- if (UsbCbiDev != NULL) {
- gBS->FreePool (UsbCbiDev);
- }
-
- return Status;
-
-}
-
-STATIC
-EFI_STATUS
-EFIAPI
-CBI1DriverBindingStop (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN UINTN NumberOfChildren,
- IN EFI_HANDLE *ChildHandleBuffer
- )
-/*++
-
- Routine Description:
- Stop this driver on ControllerHandle. Support stoping any child handles
- created by this driver.
-
- Arguments:
- This - Protocol instance pointer.
- ControllerHandle - Handle of device to stop driver on
- NumberOfChildren - Number of Children in the ChildHandleBuffer
- ChildHandleBuffer - List of handles for the children we need to stop.
-
- Returns:
- EFI_SUCCESS - This driver is removed DeviceHandle
- EFI_UNSUPPORTED - Can't open the gEfiUsbAtapiProtocolGuid protocol
- other - This driver was not removed from this device
-
---*/
-{
- EFI_STATUS Status;
- EFI_USB_ATAPI_PROTOCOL *CBI1AtapiProtocol;
- USB_CBI_DEVICE *UsbCbiDev;
-
- //
- // Get our context back.
- //
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiUsbAtapiProtocolGuid,
- (VOID **) &CBI1AtapiProtocol,
- This->DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (EFI_ERROR (Status)) {
- return EFI_UNSUPPORTED;
- }
-
- UsbCbiDev = USB_CBI_DEVICE_FROM_THIS (CBI1AtapiProtocol);
-
- Cbi1ReportStatusCode (
- UsbCbiDev->DevicePath,
- EFI_PROGRESS_CODE,
- (EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_PC_DISABLE)
- );
-
- Status = gBS->UninstallProtocolInterface (
- ControllerHandle,
- &gEfiUsbAtapiProtocolGuid,
- &UsbCbiDev->UsbAtapiProtocol
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Status = gBS->CloseProtocol (
- ControllerHandle,
- &gEfiUsbIoProtocolGuid,
- This->DriverBindingHandle,
- ControllerHandle
- );
- gBS->FreePool (UsbCbiDev);
-
- return Status;
-
-}
-//
-// CBI1 command
-//
-STATIC
-EFI_STATUS
-CBI1CommandPhase (
- IN USB_CBI_DEVICE *UsbCbiDev,
- IN VOID *Command,
- IN UINT8 CommandSize,
- OUT UINT32 *Result
- )
-/*++
-
- Routine Description:
- In order to make consistence, CBI transportation protocol does only use
- the first 3 parameters. Other parameters are not used here.
-
- Arguments:
- UsbCbiDev - USB_CBI_DEVICE
- Command - Command to send
- CommandSize - Command Size
- Result - Result to return
-
- Returns:
- EFI_SUCCESS - This driver is removed DeviceHandle
- other - This driver was not removed from this device
---*/
-{
- EFI_STATUS Status;
- EFI_USB_IO_PROTOCOL *UsbIo;
- EFI_USB_DEVICE_REQUEST Request;
- UINT32 TimeOutInMilliSeconds;
-
- UsbIo = UsbCbiDev->UsbIo;
-
- ZeroMem (&Request, sizeof (EFI_USB_DEVICE_REQUEST));
-
- //
- // Device request see CBI specification
- //
- Request.RequestType = 0x21;
- Request.Length = CommandSize;
-
- TimeOutInMilliSeconds = 1000;
-
- Status = UsbIo->UsbControlTransfer (
- UsbIo,
- &Request,
- EfiUsbDataOut,
- TimeOutInMilliSeconds,
- Command,
- CommandSize,
- Result
- );
-
- return Status;
-}
-
-STATIC
-EFI_STATUS
-CBI1DataPhase (
- IN USB_CBI_DEVICE *UsbCbiDev,
- IN UINT32 DataSize,
- IN OUT VOID *DataBuffer,
- IN EFI_USB_DATA_DIRECTION Direction,
- IN UINT16 Timeout,
- OUT UINT32 *Result
- )
-/*++
-
-Routine Description:
-
- CBI1 Data Phase
-
-Arguments:
-
- UsbCbiDev - USB_CBI_DEVICE
- DataSize - Data Size
- DataBuffer - Data Buffer
- Direction - IN/OUT/NODATA
- Timeout - Time out value in milliseconds
- Result - Transfer result
-
-Returns:
-
- EFI_SUCCESS - Success
-
---*/
-{
- EFI_STATUS Status;
- EFI_USB_IO_PROTOCOL *UsbIo;
- UINT8 EndpointAddr;
- UINTN Remain;
- UINTN Increment;
- UINT32 MaxPacketLen;
- UINT8 *BufferPtr;
-
- UsbIo = UsbCbiDev->UsbIo;
-
- Remain = DataSize;
- BufferPtr = (UINT8 *) DataBuffer;
-
- //
- // retrieve the the max packet length of the given endpoint
- //
- if (Direction == EfiUsbDataIn) {
- MaxPacketLen = (UsbCbiDev->BulkInEndpointDescriptor).MaxPacketSize;
- EndpointAddr = (UsbCbiDev->BulkInEndpointDescriptor).EndpointAddress;
- } else {
- MaxPacketLen = (UsbCbiDev->BulkOutEndpointDescriptor).MaxPacketSize;
- EndpointAddr = (UsbCbiDev->BulkOutEndpointDescriptor).EndpointAddress;
- }
-
- while (Remain > 0) {
- //
- // Using 15 packets to aVOID Bitstuff error
- //
- if (Remain > 15 * MaxPacketLen) {
- Increment = 15 * MaxPacketLen;
- } else {
- Increment = Remain;
- }
-
- Status = UsbIo->UsbBulkTransfer (
- UsbIo,
- EndpointAddr,
- BufferPtr,
- &Increment,
- Timeout,
- Result
- );
-
- if (EFI_ERROR (Status)) {
- goto ErrorExit;
- }
-
- BufferPtr += Increment;
- Remain -= Increment;
- }
-
- return EFI_SUCCESS;
-
-ErrorExit:
-
- if (Direction == EfiUsbDataIn) {
- Cbi1ReportStatusCode (
- UsbCbiDev->DevicePath,
- EFI_ERROR_CODE | EFI_ERROR_MINOR,
- (EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_EC_INPUT_ERROR)
- );
- } else {
- Cbi1ReportStatusCode (
- UsbCbiDev->DevicePath,
- EFI_ERROR_CODE | EFI_ERROR_MINOR,
- (EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_EC_OUTPUT_ERROR)
- );
- }
-
- if (((*Result) & EFI_USB_ERR_STALL) == EFI_USB_ERR_STALL) {
- //
- // just endpoint stall happens
- //
- UsbClearEndpointHalt (
- UsbIo,
- EndpointAddr,
- Result
- );
- }
-
- return Status;
-}
-//
-// CBI1 USB ATAPI Protocol
-//
-STATIC
-EFI_STATUS
-EFIAPI
-CBI1MassStorageReset (
- IN EFI_USB_ATAPI_PROTOCOL *This,
- IN BOOLEAN ExtendedVerification
- )
-/*++
-
- Routine Description:
- Reset CBI Devices
-
- Arguments:
- This - Protocol instance pointer.
- ExtendedVerification - TRUE if we need to do strictly reset.
-
- Returns:
- EFI_SUCCESS - Command succeeded.
- EFI_DEVICE_ERROR - Command failed.
-
---*/
-{
- UINT8 ResetCommand[12];
- EFI_USB_IO_PROTOCOL *UsbIo;
- USB_CBI_DEVICE *UsbCbiDev;
- UINT8 EndpointAddr;
- UINT32 Result;
-
- UsbCbiDev = USB_CBI_DEVICE_FROM_THIS (This);
- UsbIo = UsbCbiDev->UsbIo;
-
- Cbi1ReportStatusCode (
- UsbCbiDev->DevicePath,
- EFI_PROGRESS_CODE,
- (EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_PC_RESET)
- );
-
- if (ExtendedVerification) {
- UsbIo->UsbPortReset (UsbIo);
- }
- //
- // CBI reset command protocol
- //
- SetMem (ResetCommand, sizeof (ResetCommand), 0xff);
- ResetCommand[0] = 0x1d;
- ResetCommand[1] = 0x04;
-
- CBI1CommandPhase (
- UsbCbiDev,
- ResetCommand,
- 12,
- &Result
- );
-
- //
- // clear bulk in endpoint stall feature
- //
- EndpointAddr = UsbCbiDev->BulkInEndpointDescriptor.EndpointAddress;
- UsbClearEndpointHalt (
- UsbIo,
- EndpointAddr,
- &Result
- );
-
- //
- // clear bulk out endpoint stall feature
- //
- EndpointAddr = UsbCbiDev->BulkOutEndpointDescriptor.EndpointAddress;
- UsbClearEndpointHalt (
- UsbIo,
- EndpointAddr,
- &Result
- );
-
- return EFI_SUCCESS;
-
-}
-
-STATIC
-EFI_STATUS
-EFIAPI
-CBI1AtapiCommand (
- IN EFI_USB_ATAPI_PROTOCOL *This,
- IN VOID *Command,
- IN UINT8 CommandSize,
- IN VOID *DataBuffer,
- IN UINT32 BufferLength,
- IN EFI_USB_DATA_DIRECTION Direction,
- IN UINT16 TimeOutInMilliSeconds
- )
-/*++
-
- Routine Description:
- Send ATAPI command using CBI1 protocol.
-
- Arguments:
- This - Protocol instance pointer.
- Command - Command buffer
- CommandSize - Size of Command Buffer
- DataBuffer - Data buffer
- BufferLength - Length of Data buffer
- Direction - Data direction of this command
- TimeOutInMilliSeconds - Timeout value in ms
-
- Returns:
- EFI_SUCCESS - Command succeeded.
- EFI_DEVICE_ERROR - Command failed.
-
---*/
-{
- EFI_STATUS Status;
- USB_CBI_DEVICE *UsbCbiDev;
- UINT32 Result;
- UINT8 Index;
- UINT8 MaxRetryNum;
-
- UsbCbiDev = USB_CBI_DEVICE_FROM_THIS (This);
-
- MaxRetryNum = 3;
-
- for (Index = 0; Index < MaxRetryNum; Index++) {
-
- //
- // First send ATAPI command through CBI1
- //
- Status = CBI1CommandPhase (
- UsbCbiDev,
- Command,
- CommandSize,
- &Result
- );
- if (EFI_ERROR (Status)) {
-
- switch (Result) {
-
- case EFI_USB_NOERROR:
- case EFI_USB_ERR_STALL:
- case EFI_USB_ERR_SYSTEM:
- return EFI_DEVICE_ERROR;
-
- default:
- continue;
- break;
- }
- } else {
- break;
- }
- }
-
- if (Index == MaxRetryNum) {
- return EFI_DEVICE_ERROR;
- }
-
- for (Index = 0; Index < MaxRetryNum; Index++) {
- //
- // Send/Get Data if there is a Data Stage
- //
- switch (Direction) {
-
- case EfiUsbDataIn:
- case EfiUsbDataOut:
- Status = CBI1DataPhase (
- UsbCbiDev,
- BufferLength,
- DataBuffer,
- Direction,
- TimeOutInMilliSeconds,
- &Result
- );
-
- if (EFI_ERROR (Status)) {
- switch (Result) {
-
- case EFI_USB_NOERROR:
- case EFI_USB_ERR_STALL:
- case EFI_USB_ERR_SYSTEM:
- return EFI_DEVICE_ERROR;
-
- default:
- continue;
- break;
- }
-
- } else {
-
- return EFI_SUCCESS;
- }
- break;
-
- case EfiUsbNoData:
- return EFI_SUCCESS;
- }
- }
- //
- // If goes here, means met error.
- //
- return EFI_DEVICE_ERROR;
-}
-
-STATIC
-VOID
-Cbi1ReportStatusCode (
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value
- )
-/*++
-
- Routine Description:
- Report Status Code in Usb Cbi1 Driver
-
- Arguments:
- DevicePath - Use this to get Device Path
- CodeType - Status Code Type
- CodeValue - Status Code Value
-
- Returns:
- None
-
---*/
-{
- REPORT_STATUS_CODE_WITH_DEVICE_PATH (
- CodeType,
- Value,
- DevicePath
- );
-
-}
|