diff options
Diffstat (limited to 'EdkModulePkg/Library/DxeCorePerformanceLib')
-rw-r--r-- | EdkModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.c | 637 | ||||
-rw-r--r-- | EdkModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.msa | 90 |
2 files changed, 0 insertions, 727 deletions
diff --git a/EdkModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.c b/EdkModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.c deleted file mode 100644 index 727133226c..0000000000 --- a/EdkModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.c +++ /dev/null @@ -1,637 +0,0 @@ -/*++
-
-Copyright (c) 2006, Intel Corporation
-All rights reserved. This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-Module Name:
-
- DxeCorePerformance.c
-
-Abstract:
-
- Support for measurement of DXE performance
-
---*/
-
-//
-// Interface declarations for Performance Protocol.
-//
-/**
- Adds a record at the end of the performance measurement log
- that records the start time of a performance measurement.
-
- Adds a record to the end of the performance measurement log
- that contains the Handle, Token, and Module.
- The end time of the new record must be set to zero.
- If TimeStamp is not zero, then TimeStamp is used to fill in the start time in the record.
- If TimeStamp is zero, the start time in the record is filled in with the value
- read from the current time stamp.
-
- @param Handle Pointer to environment specific context used
- to identify the component being measured.
- @param Token Pointer to a Null-terminated ASCII string
- that identifies the component being measured.
- @param Module Pointer to a Null-terminated ASCII string
- that identifies the module being measured.
- @param TimeStamp 64-bit time stamp.
-
- @retval EFI_SUCCESS The data was read correctly from the device.
- @retval EFI_OUT_OF_RESOURCES There are not enough resources to record the measurement.
-
-**/
-STATIC
-EFI_STATUS
-EFIAPI
-StartGauge (
- IN CONST VOID *Handle, OPTIONAL
- IN CONST CHAR8 *Token, OPTIONAL
- IN CONST CHAR8 *Module, OPTIONAL
- IN UINT64 TimeStamp
- );
-
-/**
- Searches the performance measurement log from the beginning of the log
- for the first matching record that contains a zero end time and fills in a valid end time.
-
- Searches the performance measurement log from the beginning of the log
- for the first record that matches Handle, Token, and Module and has an end time value of zero.
- If the record can not be found then return EFI_NOT_FOUND.
- If the record is found and TimeStamp is not zero,
- then the end time in the record is filled in with the value specified by TimeStamp.
- If the record is found and TimeStamp is zero, then the end time in the matching record
- is filled in with the current time stamp value.
-
- @param Handle Pointer to environment specific context used
- to identify the component being measured.
- @param Token Pointer to a Null-terminated ASCII string
- that identifies the component being measured.
- @param Module Pointer to a Null-terminated ASCII string
- that identifies the module being measured.
- @param TimeStamp 64-bit time stamp.
-
- @retval EFI_SUCCESS The end of the measurement was recorded.
- @retval EFI_NOT_FOUND The specified measurement record could not be found.
-
-**/
-STATIC
-EFI_STATUS
-EFIAPI
-EndGauge (
- IN CONST VOID *Handle, OPTIONAL
- IN CONST CHAR8 *Token, OPTIONAL
- IN CONST CHAR8 *Module, OPTIONAL
- IN UINT64 TimeStamp
- );
-
-/**
- Retrieves a previously logged performance measurement.
-
- Retrieves the performance log entry from the performance log specified by LogEntryKey.
- If it stands for a valid entry, then EFI_SUCCESS is returned and
- GaugeDataEntry stores the pointer to that entry.
-
- @param LogEntryKey The key for the previous performance measurement log entry.
- If 0, then the first performance measurement log entry is retrieved.
- @param GaugeDataEntry The indirect pointer to the gauge data entry specified by LogEntryKey
- if the retrieval is successful.
-
- @retval EFI_SUCCESS The GuageDataEntry is successfuly found based on LogEntryKey.
- @retval EFI_NOT_FOUND The LogEntryKey is the last entry (equals to the total entry number).
- @retval EFI_INVALIDE_PARAMETER The LogEntryKey is not a valid entry (greater than the total entry number).
- @retval EFI_INVALIDE_PARAMETER GaugeDataEntry is NULL.
-
-**/
-STATIC
-EFI_STATUS
-EFIAPI
-GetGauge (
- IN UINTN LogEntryKey,
- OUT GAUGE_DATA_ENTRY **GaugeDataEntry
- );
-
-//
-// Definition for global variables.
-//
-STATIC GAUGE_DATA_HEADER *mGaugeData;
-STATIC UINT32 mMaxGaugeRecords;
-
-EFI_HANDLE mHandle = NULL;
-PERFORMANCE_PROTOCOL mPerformanceInterface = {
- StartGauge,
- EndGauge,
- GetGauge
- };
-
-
-/**
- Searches in the gauge array with keyword Handle, Token and Module.
-
- This internal function searches for the gauge entry in the gauge array.
- If there is an entry that exactly matches the given key word triple
- and its end time stamp is zero, then the index of that gauge entry is returned;
- otherwise, the the number of gauge entries in the array is returned.
-
- @param Handle Pointer to environment specific context used
- to identify the component being measured.
- @param Token Pointer to a Null-terminated ASCII string
- that identifies the component being measured.
- @param Module Pointer to a Null-terminated ASCII string
- that identifies the module being measured.
-
- @retval The index of gauge entry in the array.
-
-**/
-STATIC
-UINT32
-InternalSearchForGaugeEntry (
- IN CONST VOID *Handle, OPTIONAL
- IN CONST CHAR8 *Token, OPTIONAL
- IN CONST CHAR8 *Module OPTIONAL
- )
-{
- UINT32 Index;
- UINT32 NumberOfEntries;
- GAUGE_DATA_ENTRY *GaugeEntryArray;
-
- if (Token == NULL) {
- Token = "";
- }
- if (Module == NULL) {
- Module = "";
- }
-
- NumberOfEntries = mGaugeData->NumberOfEntries;
- GaugeEntryArray = (GAUGE_DATA_ENTRY *) (mGaugeData + 1);
-
- for (Index = 0; Index < NumberOfEntries; Index++) {
- if ((GaugeEntryArray[Index].Handle == (EFI_PHYSICAL_ADDRESS) (UINTN) Handle) &&
- AsciiStrnCmp (GaugeEntryArray[Index].Token, Token, PEI_PERFORMANCE_STRING_LENGTH) == 0 &&
- AsciiStrnCmp (GaugeEntryArray[Index].Module, Module, PEI_PERFORMANCE_STRING_LENGTH) == 0 &&
- GaugeEntryArray[Index].EndTimeStamp == 0
- ) {
- break;
- }
- }
-
- return Index;
-}
-
-/**
- Adds a record at the end of the performance measurement log
- that records the start time of a performance measurement.
-
- Adds a record to the end of the performance measurement log
- that contains the Handle, Token, and Module.
- The end time of the new record must be set to zero.
- If TimeStamp is not zero, then TimeStamp is used to fill in the start time in the record.
- If TimeStamp is zero, the start time in the record is filled in with the value
- read from the current time stamp.
-
- @param Handle Pointer to environment specific context used
- to identify the component being measured.
- @param Token Pointer to a Null-terminated ASCII string
- that identifies the component being measured.
- @param Module Pointer to a Null-terminated ASCII string
- that identifies the module being measured.
- @param TimeStamp 64-bit time stamp.
-
- @retval EFI_SUCCESS The data was read correctly from the device.
- @retval EFI_OUT_OF_RESOURCES There are not enough resources to record the measurement.
-
-**/
-STATIC
-EFI_STATUS
-EFIAPI
-StartGauge (
- IN CONST VOID *Handle, OPTIONAL
- IN CONST CHAR8 *Token, OPTIONAL
- IN CONST CHAR8 *Module, OPTIONAL
- IN UINT64 TimeStamp
- )
-{
- GAUGE_DATA_ENTRY *GaugeEntryArray;
- UINTN GaugeDataSize;
- UINTN OldGaugeDataSize;
- GAUGE_DATA_HEADER *OldGaugeData;
- UINT32 Index;
-
- Index = mGaugeData->NumberOfEntries;
- if (Index >= mMaxGaugeRecords) {
- //
- // Try to enlarge the scale of gauge arrary.
- //
- OldGaugeData = mGaugeData;
- OldGaugeDataSize = sizeof (GAUGE_DATA_HEADER) + sizeof (GAUGE_DATA_ENTRY) * mMaxGaugeRecords;
-
- mMaxGaugeRecords *= 2;
- GaugeDataSize = sizeof (GAUGE_DATA_HEADER) + sizeof (GAUGE_DATA_ENTRY) * mMaxGaugeRecords;
-
- mGaugeData = AllocateZeroPool (GaugeDataSize);
- if (mGaugeData == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
- //
- // Initialize new data arry and migrate old data one.
- //
- mGaugeData = CopyMem (mGaugeData, OldGaugeData, OldGaugeDataSize);
-
- FreePool (OldGaugeData);
- }
-
- GaugeEntryArray = (GAUGE_DATA_ENTRY *) (mGaugeData + 1);
- GaugeEntryArray[Index].Handle = (EFI_PHYSICAL_ADDRESS) (UINTN) Handle;
-
- if (Token != NULL) {
- AsciiStrnCpy (GaugeEntryArray[Index].Token, Token, DXE_PERFORMANCE_STRING_LENGTH);
- }
- if (Module != NULL) {
- AsciiStrnCpy (GaugeEntryArray[Index].Module, Module, DXE_PERFORMANCE_STRING_LENGTH);
- }
-
- if (TimeStamp == 0) {
- TimeStamp = GetPerformanceCounter ();
- }
- GaugeEntryArray[Index].StartTimeStamp = TimeStamp;
-
- mGaugeData->NumberOfEntries++;
-
- return EFI_SUCCESS;
-}
-
-/**
- Searches the performance measurement log from the beginning of the log
- for the first matching record that contains a zero end time and fills in a valid end time.
-
- Searches the performance measurement log from the beginning of the log
- for the first record that matches Handle, Token, and Module and has an end time value of zero.
- If the record can not be found then return EFI_NOT_FOUND.
- If the record is found and TimeStamp is not zero,
- then the end time in the record is filled in with the value specified by TimeStamp.
- If the record is found and TimeStamp is zero, then the end time in the matching record
- is filled in with the current time stamp value.
-
- @param Handle Pointer to environment specific context used
- to identify the component being measured.
- @param Token Pointer to a Null-terminated ASCII string
- that identifies the component being measured.
- @param Module Pointer to a Null-terminated ASCII string
- that identifies the module being measured.
- @param TimeStamp 64-bit time stamp.
-
- @retval EFI_SUCCESS The end of the measurement was recorded.
- @retval EFI_NOT_FOUND The specified measurement record could not be found.
-
-**/
-STATIC
-EFI_STATUS
-EFIAPI
-EndGauge (
- IN CONST VOID *Handle, OPTIONAL
- IN CONST CHAR8 *Token, OPTIONAL
- IN CONST CHAR8 *Module, OPTIONAL
- IN UINT64 TimeStamp
- )
-{
- GAUGE_DATA_ENTRY *GaugeEntryArray;
- UINT32 Index;
-
- if (TimeStamp == 0) {
- TimeStamp = GetPerformanceCounter ();
- }
-
- Index = InternalSearchForGaugeEntry (Handle, Token, Module);
- if (Index >= mGaugeData->NumberOfEntries) {
- return EFI_NOT_FOUND;
- }
- GaugeEntryArray = (GAUGE_DATA_ENTRY *) (mGaugeData + 1);
- GaugeEntryArray[Index].EndTimeStamp = TimeStamp;
-
- return EFI_SUCCESS;
-}
-
-/**
- Retrieves a previously logged performance measurement.
-
- Retrieves the performance log entry from the performance log specified by LogEntryKey.
- If it stands for a valid entry, then EFI_SUCCESS is returned and
- GaugeDataEntry stores the pointer to that entry.
-
- @param LogEntryKey The key for the previous performance measurement log entry.
- If 0, then the first performance measurement log entry is retrieved.
- @param GaugeDataEntry The indirect pointer to the gauge data entry specified by LogEntryKey
- if the retrieval is successful.
-
- @retval EFI_SUCCESS The GuageDataEntry is successfuly found based on LogEntryKey.
- @retval EFI_NOT_FOUND The LogEntryKey is the last entry (equals to the total entry number).
- @retval EFI_INVALIDE_PARAMETER The LogEntryKey is not a valid entry (greater than the total entry number).
- @retval EFI_INVALIDE_PARAMETER GaugeDataEntry is NULL.
-
-**/
-STATIC
-EFI_STATUS
-EFIAPI
-GetGauge (
- IN UINTN LogEntryKey,
- OUT GAUGE_DATA_ENTRY **GaugeDataEntry
- )
-{
- UINTN NumberOfEntries;
- GAUGE_DATA_ENTRY *LogEntryArray;
-
- NumberOfEntries = (UINTN) (mGaugeData->NumberOfEntries);
- if (LogEntryKey > NumberOfEntries) {
- return EFI_INVALID_PARAMETER;
- }
- if (LogEntryKey == NumberOfEntries) {
- return EFI_NOT_FOUND;
- }
-
- LogEntryArray = (GAUGE_DATA_ENTRY *) (mGaugeData + 1);
-
- if (GaugeDataEntry == NULL) {
- return EFI_INVALID_PARAMETER;
- }
- *GaugeDataEntry = &LogEntryArray[LogEntryKey];
-
- return EFI_SUCCESS;
-}
-
-/**
- Dumps all the PEI performance log to DXE performance gauge array.
-
- This internal function dumps all the PEI performance log to the DXE performance gauge array.
- It retrieves the optional GUID HOB for PEI performance and then saves the performance data
- to DXE performance data structures.
-
-**/
-STATIC
-VOID
-InternalGetPeiPerformance (
- VOID
- )
-{
- EFI_HOB_GUID_TYPE *GuidHob;
- PEI_PERFORMANCE_LOG_HEADER *LogHob;
- PEI_PERFORMANCE_LOG_ENTRY *LogEntryArray;
- GAUGE_DATA_ENTRY *GaugeEntryArray;
- UINT32 Index;
- UINT32 NumberOfEntries;
-
- NumberOfEntries = 0;
- GaugeEntryArray = (GAUGE_DATA_ENTRY *) (mGaugeData + 1);
-
- //
- // Dump PEI Log Entries to DXE Guage Data structure.
- //
- GuidHob = GetFirstGuidHob (&gPeiPerformanceHobGuid);
- if (GuidHob != NULL) {
- LogHob = GET_GUID_HOB_DATA (GuidHob);
- LogEntryArray = (PEI_PERFORMANCE_LOG_ENTRY *) (LogHob + 1);
- GaugeEntryArray = (GAUGE_DATA_ENTRY *) (mGaugeData + 1);
-
- NumberOfEntries = LogHob->NumberOfEntries;
- for (Index = 0; Index < NumberOfEntries; Index++) {
- GaugeEntryArray[Index].Handle = LogEntryArray[Index].Handle;
- AsciiStrnCpy (GaugeEntryArray[Index].Token, LogEntryArray[Index].Token, DXE_PERFORMANCE_STRING_LENGTH);
- AsciiStrnCpy (GaugeEntryArray[Index].Module, LogEntryArray[Index].Module, DXE_PERFORMANCE_STRING_LENGTH);
- GaugeEntryArray[Index].StartTimeStamp = LogEntryArray[Index].StartTimeStamp;
- GaugeEntryArray[Index].EndTimeStamp = LogEntryArray[Index].EndTimeStamp;
- }
- }
- mGaugeData->NumberOfEntries = NumberOfEntries;
-}
-
-/**
- The constructor function initializes Performance infrastructure for DXE phase.
-
- The constructor function publishes Performance protocol, allocates memory to log DXE performance
- and merges PEI performance data to DXE performance log.
- It will ASSERT() if one of these operations fails and it will always return EFI_SUCCESS.
-
- @param ImageHandle The firmware allocated handle for the EFI image.
- @param SystemTable A pointer to the EFI System Table.
-
- @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
-
-**/
-EFI_STATUS
-EFIAPI
-DxeCorePerformanceLibConstructor (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
-{
- EFI_STATUS Status;
-
- if (!PerformanceMeasurementEnabled ()) {
- //
- // Do not initialize performance infrastructure if not required.
- //
- return EFI_SUCCESS;
- }
- //
- // Install the protocol interfaces.
- //
- Status = gBS->InstallProtocolInterface (
- &mHandle,
- &gPerformanceProtocolGuid,
- EFI_NATIVE_INTERFACE,
- &mPerformanceInterface
- );
- ASSERT_EFI_ERROR (Status);
-
- mMaxGaugeRecords = INIT_DXE_GAUGE_DATA_ENTRIES + PcdGet8 (PcdMaxPeiPerformanceLogEntries);
-
- mGaugeData = AllocateZeroPool (sizeof (GAUGE_DATA_HEADER) + (sizeof (GAUGE_DATA_ENTRY) * mMaxGaugeRecords));
- ASSERT (mGaugeData != NULL);
-
- InternalGetPeiPerformance ();
-
- return Status;
-}
-
-/**
- Adds a record at the end of the performance measurement log
- that records the start time of a performance measurement.
-
- Adds a record to the end of the performance measurement log
- that contains the Handle, Token, and Module.
- The end time of the new record must be set to zero.
- If TimeStamp is not zero, then TimeStamp is used to fill in the start time in the record.
- If TimeStamp is zero, the start time in the record is filled in with the value
- read from the current time stamp.
-
- @param Handle Pointer to environment specific context used
- to identify the component being measured.
- @param Token Pointer to a Null-terminated ASCII string
- that identifies the component being measured.
- @param Module Pointer to a Null-terminated ASCII string
- that identifies the module being measured.
- @param TimeStamp 64-bit time stamp.
-
- @retval RETURN_SUCCESS The start of the measurement was recorded.
- @retval RETURN_OUT_OF_RESOURCES There are not enough resources to record the measurement.
-
-**/
-RETURN_STATUS
-EFIAPI
-StartPerformanceMeasurement (
- IN CONST VOID *Handle, OPTIONAL
- IN CONST CHAR8 *Token, OPTIONAL
- IN CONST CHAR8 *Module, OPTIONAL
- IN UINT64 TimeStamp
- )
-{
- EFI_STATUS Status;
-
- Status = StartGauge (Handle, Token, Module, TimeStamp);
- return (RETURN_STATUS) Status;
-}
-
-/**
- Searches the performance measurement log from the beginning of the log
- for the first matching record that contains a zero end time and fills in a valid end time.
-
- Searches the performance measurement log from the beginning of the log
- for the first record that matches Handle, Token, and Module and has an end time value of zero.
- If the record can not be found then return RETURN_NOT_FOUND.
- If the record is found and TimeStamp is not zero,
- then the end time in the record is filled in with the value specified by TimeStamp.
- If the record is found and TimeStamp is zero, then the end time in the matching record
- is filled in with the current time stamp value.
-
- @param Handle Pointer to environment specific context used
- to identify the component being measured.
- @param Token Pointer to a Null-terminated ASCII string
- that identifies the component being measured.
- @param Module Pointer to a Null-terminated ASCII string
- that identifies the module being measured.
- @param TimeStamp 64-bit time stamp.
-
- @retval RETURN_SUCCESS The end of the measurement was recorded.
- @retval RETURN_NOT_FOUND The specified measurement record could not be found.
-
-**/
-RETURN_STATUS
-EFIAPI
-EndPerformanceMeasurement (
- IN CONST VOID *Handle, OPTIONAL
- IN CONST CHAR8 *Token, OPTIONAL
- IN CONST CHAR8 *Module, OPTIONAL
- IN UINT64 TimeStamp
- )
-{
- EFI_STATUS Status;
-
- Status = EndGauge (Handle, Token, Module, TimeStamp);
- return (RETURN_STATUS) Status;
-}
-
-/**
- Attempts to retrieve a performance measurement log entry from the performance measurement log.
-
- Attempts to retrieve the performance log entry specified by LogEntryKey. If LogEntryKey is
- zero on entry, then an attempt is made to retrieve the first entry from the performance log,
- and the key for the second entry in the log is returned. If the performance log is empty,
- then no entry is retrieved and zero is returned. If LogEntryKey is not zero, then the performance
- log entry associated with LogEntryKey is retrieved, and the key for the next entry in the log is
- returned. If LogEntryKey is the key for the last entry in the log, then the last log entry is
- retrieved and an implementation specific non-zero key value that specifies the end of the performance
- log is returned. If LogEntryKey is equal this implementation specific non-zero key value, then no entry
- is retrieved and zero is returned. In the cases where a performance log entry can be returned,
- the log entry is returned in Handle, Token, Module, StartTimeStamp, and EndTimeStamp.
- If LogEntryKey is not a valid log entry key for the performance measurement log, then ASSERT().
- If Handle is NULL, then ASSERT().
- If Token is NULL, then ASSERT().
- If Module is NULL, then ASSERT().
- If StartTimeStamp is NULL, then ASSERT().
- If EndTimeStamp is NULL, then ASSERT().
-
- @param LogEntryKey On entry, the key of the performance measurement log entry to retrieve.
- 0, then the first performance measurement log entry is retrieved.
- On exit, the key of the next performance lof entry entry.
- @param Handle Pointer to environment specific context used to identify the component
- being measured.
- @param Token Pointer to a Null-terminated ASCII string that identifies the component
- being measured.
- @param Module Pointer to a Null-terminated ASCII string that identifies the module
- being measured.
- @param StartTimeStamp Pointer to the 64-bit time stamp that was recorded when the measurement
- was started.
- @param EndTimeStamp Pointer to the 64-bit time stamp that was recorded when the measurement
- was ended.
-
- @return The key for the next performance log entry (in general case).
-
-**/
-UINTN
-EFIAPI
-GetPerformanceMeasurement (
- IN UINTN LogEntryKey,
- OUT CONST VOID **Handle,
- OUT CONST CHAR8 **Token,
- OUT CONST CHAR8 **Module,
- OUT UINT64 *StartTimeStamp,
- OUT UINT64 *EndTimeStamp
- )
-{
- EFI_STATUS Status;
- GAUGE_DATA_ENTRY *GaugeData;
-
- ASSERT (Handle != NULL);
- ASSERT (Token != NULL);
- ASSERT (Module != NULL);
- ASSERT (StartTimeStamp != NULL);
- ASSERT (EndTimeStamp != NULL);
-
- Status = GetGauge (LogEntryKey++, &GaugeData);
-
- //
- // Make sure that LogEntryKey is a valid log entry key,
- //
- ASSERT (Status != EFI_INVALID_PARAMETER);
-
- if (EFI_ERROR (Status)) {
- //
- // The LogEntryKey is the last entry (equals to the total entry number).
- //
- return 0;
- }
-
- ASSERT (GaugeData != NULL);
-
- *Handle = (VOID *) (UINTN) GaugeData->Handle;
- *Token = GaugeData->Token;
- *Module = GaugeData->Module;
- *StartTimeStamp = GaugeData->StartTimeStamp;
- *EndTimeStamp = GaugeData->EndTimeStamp;
-
- return LogEntryKey;
-}
-
-/**
- Returns TRUE if the performance measurement macros are enabled.
-
- This function returns TRUE if the PERFORMANCE_LIBRARY_PROPERTY_MEASUREMENT_ENABLED bit of
- PcdPerformanceLibraryPropertyMask is set. Otherwise FALSE is returned.
-
- @retval TRUE The PERFORMANCE_LIBRARY_PROPERTY_MEASUREMENT_ENABLED bit of
- PcdPerformanceLibraryPropertyMask is set.
- @retval FALSE The PERFORMANCE_LIBRARY_PROPERTY_MEASUREMENT_ENABLED bit of
- PcdPerformanceLibraryPropertyMask is clear.
-
-**/
-BOOLEAN
-EFIAPI
-PerformanceMeasurementEnabled (
- VOID
- )
-{
- return (BOOLEAN) ((PcdGet8(PcdPerformanceLibraryPropertyMask) & PERFORMANCE_LIBRARY_PROPERTY_MEASUREMENT_ENABLED) != 0);
-}
diff --git a/EdkModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.msa b/EdkModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.msa deleted file mode 100644 index 444867af86..0000000000 --- a/EdkModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.msa +++ /dev/null @@ -1,90 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<ModuleSurfaceArea xmlns="http://www.TianoCore.org/2006/Edk2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <MsaHeader>
- <ModuleName>DxeCorePerformanceLib</ModuleName>
- <ModuleType>DXE_CORE</ModuleType>
- <GuidValue>D0F78BBF-0A30-4c63-8A48-0F618A4AFACD</GuidValue>
- <Version>1.0</Version>
- <Abstract>Component description file for DxeCore Performance Library</Abstract>
- <Description>This library provides intrastructure for DxeCore to log performance.</Description>
- <Copyright>Copyright (c) 2006, Intel Corporation.</Copyright>
- <License>All rights reserved. This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.</License>
- <Specification>FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052</Specification>
- </MsaHeader>
- <ModuleDefinitions>
- <SupportedArchitectures>IA32 X64 IPF EBC</SupportedArchitectures>
- <BinaryModule>false</BinaryModule>
- <OutputFileBasename>DxeCorePerformanceLib</OutputFileBasename>
- </ModuleDefinitions>
- <LibraryClassDefinitions>
- <LibraryClass Usage="ALWAYS_PRODUCED" SupModuleList="DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SAL_DRIVER DXE_SMM_DRIVER UEFI_APPLICATION UEFI_DRIVER">
- <Keyword>PerformanceLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>DebugLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>HobLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>BaseLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>BaseMemoryLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>TimerLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>PcdLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>UefiBootServicesTableLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>MemoryAllocationLib</Keyword>
- </LibraryClass>
- </LibraryClassDefinitions>
- <SourceFiles>
- <Filename>DxeCorePerformanceLib.c</Filename>
- </SourceFiles>
- <PackageDependencies>
- <Package PackageGuid="5e0e9358-46b6-4ae2-8218-4ab8b9bbdcec"/>
- <Package PackageGuid="68169ab0-d41b-4009-9060-292c253ac43d"/>
- </PackageDependencies>
- <Protocols>
- <Protocol Usage="ALWAYS_PRODUCED">
- <ProtocolCName>gPerformanceProtocolGuid</ProtocolCName>
- </Protocol>
- </Protocols>
- <Guids>
- <GuidCNames Usage="ALWAYS_CONSUMED">
- <GuidCName>gPeiPerformanceHobGuid</GuidCName>
- </GuidCNames>
- </Guids>
- <Externs>
- <Specification>EFI_SPECIFICATION_VERSION 0x00020000</Specification>
- <Specification>EDK_RELEASE_VERSION 0x00020000</Specification>
- <Extern>
- <Constructor>DxeCorePerformanceLibConstructor</Constructor>
- </Extern>
- </Externs>
- <PcdCoded>
- <PcdEntry PcdItemType="FIXED_AT_BUILD">
- <C_Name>PcdPerformanceLibraryPropertyMask</C_Name>
- <TokenSpaceGuidCName>gEfiMdePkgTokenSpaceGuid</TokenSpaceGuidCName>
- <HelpText>The bitmask of flags that specify the enable/disable of - Performance Measurement.</HelpText>
- </PcdEntry>
- <PcdEntry PcdItemType="DYNAMIC">
- <C_Name>PcdMaxPeiPerformanceLogEntries</C_Name>
- <TokenSpaceGuidCName>gEfiEdkModulePkgTokenSpaceGuid</TokenSpaceGuidCName>
- <HelpText>Maximun number of performance log entries during PEI phase.</HelpText>
- </PcdEntry>
- </PcdCoded>
-</ModuleSurfaceArea>
\ No newline at end of file |