diff options
Diffstat (limited to 'EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/UnixSerialIo.c')
| -rw-r--r-- | EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/UnixSerialIo.c | 1487 |
1 files changed, 0 insertions, 1487 deletions
diff --git a/EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/UnixSerialIo.c b/EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/UnixSerialIo.c deleted file mode 100644 index 9f550f25c0..0000000000 --- a/EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/UnixSerialIo.c +++ /dev/null @@ -1,1487 +0,0 @@ -/*++
-
-Copyright (c) 2006 - 2007, Intel Corporation
-All rights reserved. This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-Module Name:
-
- UnixSerialIo.c
-
-Abstract:
-
- Our DriverBinding member functions operate on the handles
- created by the NT Bus driver.
-
- Handle(1) - UnixIo - DevicePath(1)
-
- If a serial port is added to the system this driver creates a new handle.
- The new handle is required, since the serial device must add an UART device
- pathnode.
-
- Handle(2) - SerialIo - DevicePath(1)\UART
-
- The driver then adds a gEfiUnixSerialPortGuid as a protocol to Handle(1).
- The instance data for this protocol is the private data used to create
- Handle(2).
-
- Handle(1) - UnixIo - DevicePath(1) - UnixSerialPort
-
- If the driver is unloaded Handle(2) is removed from the system and
- gEfiUnixSerialPortGuid is removed from Handle(1).
-
- Note: Handle(1) is any handle created by the Win NT Bus driver that is passed
- into the DriverBinding member functions of this driver. This driver requires
- a Handle(1) to contain a UnixIo protocol, a DevicePath protocol, and
- the TypeGuid in the UnixIo must be gEfiUnixSerialPortGuid.
-
- If Handle(1) contains a gEfiUnixSerialPortGuid protocol then the driver is
- loaded on the device.
-
---*/
-
-#include "UnixSerialIo.h"
-#include <termio.h>
-
-EFI_DRIVER_BINDING_PROTOCOL gUnixSerialIoDriverBinding = {
- UnixSerialIoDriverBindingSupported,
- UnixSerialIoDriverBindingStart,
- UnixSerialIoDriverBindingStop,
- 0xa,
- NULL,
- NULL
-};
-
-STATIC
-UINTN
-ConvertBaud2Unix (
- UINT64 BaudRate
- )
-{
- switch (BaudRate) {
- case 0:
- return B0;
- case 50:
- return B50;
- case 75:
- return B75;
- case 110:
- return B110;
- case 134:
- return B134;
- case 150:
- return B150;
- case 200:
- return B200;
- case 300:
- return B300;
- case 600:
- return B600;
- case 1200:
- return B1200;
- case 1800:
- return B1800;
- case 2400:
- return B2400;
- case 4800:
- return B4800;
- case 9600:
- return B9600;
- case 19200:
- return B19200;
- case 38400:
- return B38400;
- case 57600:
- return B57600;
- case 115200:
- return B115200;
- case 230400:
- return B230400;
- case 460800:
- return B460800;
- case 500000:
- return B500000;
- case 576000:
- return B576000;
- case 921600:
- return B921600;
- case 1000000:
- return B1000000;
- case 1152000:
- return B1152000;
- case 1500000:
- return B1500000;
- case 2000000:
- return B2000000;
- case 2500000:
- return B2500000;
- case 3000000:
- return B3000000;
- case 3500000:
- return B3500000;
- case 4000000:
- return B4000000;
- case __MAX_BAUD:
- default:
- DEBUG ((EFI_D_ERROR, "Invalid Baud Rate Parameter!\r\n"));
- }
- return -1;
-}
-
-STATIC
-UINTN
-ConvertByteSize2Unix (
- UINT8 DataBit
- )
-{
- switch (DataBit) {
- case 5:
- return CS5;
- case 6:
- return CS6;
- case 7:
- return CS7;
- case 8:
- return CS8;
- default:
- DEBUG ((EFI_D_ERROR, "Invalid Data Size Parameter!\r\n"));
- }
- return -1;
-}
-
-STATIC
-VOID
-ConvertParity2Unix (
- struct termios *Options,
- EFI_PARITY_TYPE Parity
- )
-{
- switch (Parity) {
- case NoParity:
- Options->c_cflag &= ~PARENB;
- break;
- case EvenParity:
- Options->c_cflag |= PARENB;
- break;
- case OddParity:
- Options->c_cflag |= PARENB;
- Options->c_cflag |= PARODD;
- break;
- case MarkParity:
- Options->c_cflag = PARENB | CMSPAR | PARODD;
- break;
- case SpaceParity:
- Options->c_cflag |= PARENB | CMSPAR;
- Options->c_cflag &= ~PARODD;
- break;
- default:
- DEBUG ((EFI_D_ERROR, "Invalid Parity Parameter!\r\n"));
- }
-}
-
-STATIC
-VOID
-ConvertStopBit2Unix (
- struct termios *Options,
- EFI_STOP_BITS_TYPE StopBits
- )
-{
- switch (StopBits) {
- case TwoStopBits:
- Options->c_cflag |= CSTOPB;
- break;
- case OneStopBit:
- case OneFiveStopBits:
- case DefaultStopBits:
- Options->c_cflag &= ~CSTOPB;
- }
-}
-
-EFI_STATUS
-EFIAPI
-UnixSerialIoDriverBindingSupported (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Handle,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-/*++
-
-Routine Description:
- The implementation of EFI_DRIVER_BINDING_PROTOCOL.EFI_DRIVER_BINDING_SUPPORTED.
-
-Arguments:
-
-Returns:
-
- None
-
---*/
-{
- EFI_STATUS Status;
- EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
- EFI_UNIX_IO_PROTOCOL *UnixIo;
- UART_DEVICE_PATH *UartNode;
-
- //
- // Open the IO Abstraction(s) needed to perform the supported test
- //
- Status = gBS->OpenProtocol (
- Handle,
- &gEfiDevicePathProtocolGuid,
- (VOID**)&ParentDevicePath,
- This->DriverBindingHandle,
- Handle,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (Status == EFI_ALREADY_STARTED) {
- return EFI_SUCCESS;
- }
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- gBS->CloseProtocol (
- Handle,
- &gEfiDevicePathProtocolGuid,
- This->DriverBindingHandle,
- Handle
- );
-
- Status = gBS->OpenProtocol (
- Handle,
- &gEfiUnixIoProtocolGuid,
- (VOID**)&UnixIo,
- This->DriverBindingHandle,
- Handle,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (Status == EFI_ALREADY_STARTED) {
- return EFI_SUCCESS;
- }
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Make sure that the Unix Thunk Protocol is valid
- //
- if (UnixIo->UnixThunk->Signature != EFI_UNIX_THUNK_PROTOCOL_SIGNATURE) {
- Status = EFI_UNSUPPORTED;
- goto Error;
- }
-
- //
- // Check the GUID to see if this is a handle type the driver supports
- //
- if (!CompareGuid (UnixIo->TypeGuid, &gEfiUnixSerialPortGuid)) {
- Status = EFI_UNSUPPORTED;
- goto Error;
- }
-
- if (RemainingDevicePath != NULL) {
- Status = EFI_UNSUPPORTED;
- UartNode = (UART_DEVICE_PATH *) RemainingDevicePath;
- if (UartNode->Header.Type != MESSAGING_DEVICE_PATH ||
- UartNode->Header.SubType != MSG_UART_DP ||
- DevicePathNodeLength((EFI_DEVICE_PATH_PROTOCOL *)UartNode) != sizeof(UART_DEVICE_PATH)) {
- goto Error;
- }
- if (UartNode->BaudRate < 0 || UartNode->BaudRate > SERIAL_PORT_MAX_BAUD_RATE) {
- goto Error;
- }
- if (UartNode->Parity < NoParity || UartNode->Parity > SpaceParity) {
- goto Error;
- }
- if (UartNode->DataBits < 5 || UartNode->DataBits > 8) {
- goto Error;
- }
- if (UartNode->StopBits < OneStopBit || UartNode->StopBits > TwoStopBits) {
- goto Error;
- }
- if ((UartNode->DataBits == 5) && (UartNode->StopBits == TwoStopBits)) {
- goto Error;
- }
- if ((UartNode->DataBits >= 6) && (UartNode->DataBits <= 8) && (UartNode->StopBits == OneFiveStopBits)) {
- goto Error;
- }
- Status = EFI_SUCCESS;
- }
-
-Error:
- //
- // Close the I/O Abstraction(s) used to perform the supported test
- //
- gBS->CloseProtocol (
- Handle,
- &gEfiUnixIoProtocolGuid,
- This->DriverBindingHandle,
- Handle
- );
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-UnixSerialIoDriverBindingStart (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Handle,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-/*++
-
-Routine Description:
-
-Arguments:
-
-Returns:
-
- None
-
---*/
-{
- EFI_STATUS Status;
- EFI_UNIX_IO_PROTOCOL *UnixIo;
- UNIX_SERIAL_IO_PRIVATE_DATA *Private;
- UINTN UnixHandle;
- UART_DEVICE_PATH Node;
- EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
- EFI_OPEN_PROTOCOL_INFORMATION_ENTRY *OpenInfoBuffer;
- UINTN EntryCount;
- UINTN Index;
- EFI_SERIAL_IO_PROTOCOL *SerialIo;
- CHAR8 AsciiDevName[1024];
-
- DEBUG ((EFI_D_INFO, "SerialIo drive binding start!\r\n"));
- Private = NULL;
- UnixHandle = -1;
-
- //
- // Grab the protocols we need
- //
- Status = gBS->OpenProtocol (
- Handle,
- &gEfiDevicePathProtocolGuid,
- (VOID**)&ParentDevicePath,
- This->DriverBindingHandle,
- Handle,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
- return Status;
- }
-
- //
- // Grab the IO abstraction we need to get any work done
- //
- Status = gBS->OpenProtocol (
- Handle,
- &gEfiUnixIoProtocolGuid,
- (VOID**)&UnixIo,
- This->DriverBindingHandle,
- Handle,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
- gBS->CloseProtocol (
- Handle,
- &gEfiDevicePathProtocolGuid,
- This->DriverBindingHandle,
- Handle
- );
- return Status;
- }
-
- if (Status == EFI_ALREADY_STARTED) {
-
- if (RemainingDevicePath == NULL) {
- return EFI_SUCCESS;
- }
-
- //
- // Make sure a child handle does not already exist. This driver can only
- // produce one child per serial port.
- //
- Status = gBS->OpenProtocolInformation (
- Handle,
- &gEfiUnixIoProtocolGuid,
- &OpenInfoBuffer,
- &EntryCount
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Status = EFI_ALREADY_STARTED;
- for (Index = 0; Index < EntryCount; Index++) {
- if (OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) {
- Status = gBS->OpenProtocol (
- OpenInfoBuffer[Index].ControllerHandle,
- &gEfiSerialIoProtocolGuid,
- (VOID**)&SerialIo,
- This->DriverBindingHandle,
- Handle,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (!EFI_ERROR (Status)) {
- CopyMem (&Node, RemainingDevicePath, sizeof (UART_DEVICE_PATH));
- Status = SerialIo->SetAttributes (
- SerialIo,
- Node.BaudRate,
- SerialIo->Mode->ReceiveFifoDepth,
- SerialIo->Mode->Timeout,
- Node.Parity,
- Node.DataBits,
- Node.StopBits
- );
- }
- break;
- }
- }
-
- FreePool (OpenInfoBuffer);
- return Status;
- }
-
- //
- // Check to see if we can access the hardware device. If it's Open in Unix we
- // will not get access.
- //
- UnicodeStrToAsciiStr(UnixIo->EnvString, AsciiDevName);
- UnixHandle = UnixIo->UnixThunk->Open (AsciiDevName, O_RDWR | O_NOCTTY, 0);
-
- if (UnixHandle == -1) {
- DEBUG ((EFI_D_INFO, "Faile to open serial device, %s!\r\n", UnixIo->EnvString ));
- UnixIo->UnixThunk->Perror (AsciiDevName);
- Status = EFI_DEVICE_ERROR;
- goto Error;
- }
- DEBUG ((EFI_D_INFO, "Success to open serial device %s, Hanle = 0x%x \r\n", UnixIo->EnvString, UnixHandle));
-
- //
- // Construct Private data
- //
- Private = AllocatePool (sizeof (UNIX_SERIAL_IO_PRIVATE_DATA));
- if (Private == NULL) {
- goto Error;
- }
-
- //
- // This signature must be valid before any member function is called
- //
- Private->Signature = UNIX_SERIAL_IO_PRIVATE_DATA_SIGNATURE;
- Private->UnixHandle = UnixHandle;
- Private->ControllerHandle = Handle;
- Private->Handle = NULL;
- Private->UnixThunk = UnixIo->UnixThunk;
- Private->ParentDevicePath = ParentDevicePath;
- Private->ControllerNameTable = NULL;
-
- Private->SoftwareLoopbackEnable = FALSE;
- Private->HardwareLoopbackEnable = FALSE;
- Private->HardwareFlowControl = FALSE;
- Private->Fifo.First = 0;
- Private->Fifo.Last = 0;
- Private->Fifo.Surplus = SERIAL_MAX_BUFFER_SIZE;
-
- AddUnicodeString (
- "eng",
- gUnixSerialIoComponentName.SupportedLanguages,
- &Private->ControllerNameTable,
- UnixIo->EnvString
- );
-
- Private->SerialIo.Revision = SERIAL_IO_INTERFACE_REVISION;
- Private->SerialIo.Reset = UnixSerialIoReset;
- Private->SerialIo.SetAttributes = UnixSerialIoSetAttributes;
- Private->SerialIo.SetControl = UnixSerialIoSetControl;
- Private->SerialIo.GetControl = UnixSerialIoGetControl;
- Private->SerialIo.Write = UnixSerialIoWrite;
- Private->SerialIo.Read = UnixSerialIoRead;
- Private->SerialIo.Mode = &Private->SerialIoMode;
-
- if (RemainingDevicePath != NULL) {
- //
- // Match the configuration of the RemainingDevicePath. IsHandleSupported()
- // already checked to make sure the RemainingDevicePath contains settings
- // that we can support.
- //
- CopyMem (&Private->UartDevicePath, RemainingDevicePath, sizeof (UART_DEVICE_PATH));
- } else {
- //
- // Build the device path by appending the UART node to the ParentDevicePath
- // from the UnixIo handle. The Uart setings are zero here, since
- // SetAttribute() will update them to match the default setings.
- //
- ZeroMem (&Private->UartDevicePath, sizeof (UART_DEVICE_PATH));
- Private->UartDevicePath.Header.Type = MESSAGING_DEVICE_PATH;
- Private->UartDevicePath.Header.SubType = MSG_UART_DP;
- SetDevicePathNodeLength ((EFI_DEVICE_PATH_PROTOCOL *) &Private->UartDevicePath, sizeof (UART_DEVICE_PATH));
- }
-
- //
- // Build the device path by appending the UART node to the ParentDevicePath
- // from the UnixIo handle. The Uart setings are zero here, since
- // SetAttribute() will update them to match the current setings.
- //
- Private->DevicePath = AppendDevicePathNode (
- ParentDevicePath,
- (EFI_DEVICE_PATH_PROTOCOL *) &Private->UartDevicePath
- );
- if (Private->DevicePath == NULL) {
- Status = EFI_OUT_OF_RESOURCES;
- goto Error;
- }
-
- //
- // Fill in Serial I/O Mode structure based on either the RemainingDevicePath or defaults.
- //
- Private->SerialIoMode.ControlMask = SERIAL_CONTROL_MASK;
- Private->SerialIoMode.Timeout = SERIAL_TIMEOUT_DEFAULT;
- Private->SerialIoMode.BaudRate = Private->UartDevicePath.BaudRate;
- Private->SerialIoMode.ReceiveFifoDepth = SERIAL_FIFO_DEFAULT;
- Private->SerialIoMode.DataBits = Private->UartDevicePath.DataBits;
- Private->SerialIoMode.Parity = Private->UartDevicePath.Parity;
- Private->SerialIoMode.StopBits = Private->UartDevicePath.StopBits;
-
- //
- // Issue a reset to initialize the COM port
- //
- Status = Private->SerialIo.Reset (&Private->SerialIo);
- if (EFI_ERROR (Status)) {
- goto Error;
- }
-
- //
- // Create new child handle
- //
- Status = gBS->InstallMultipleProtocolInterfaces (
- &Private->Handle,
- &gEfiSerialIoProtocolGuid,
- &Private->SerialIo,
- &gEfiDevicePathProtocolGuid,
- Private->DevicePath,
- NULL
- );
- if (EFI_ERROR (Status)) {
- goto Error;
- }
-
- //
- // Open For Child Device
- //
- Status = gBS->OpenProtocol (
- Handle,
- &gEfiUnixIoProtocolGuid,
- (VOID**)&UnixIo,
- This->DriverBindingHandle,
- Private->Handle,
- EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
- );
- if (EFI_ERROR (Status)) {
- goto Error;
- }
-
- return EFI_SUCCESS;
-
-Error:
- //
- // Use the Stop() function to free all resources allocated in Start()
- //
- if (Private != NULL) {
- if (Private->Handle != NULL) {
- This->Stop (This, Handle, 1, &Private->Handle);
- } else {
- if (UnixHandle != -1) {
- Private->UnixThunk->Close (UnixHandle);
- }
-
- if (Private->DevicePath != NULL) {
- FreePool (Private->DevicePath);
- }
-
- FreeUnicodeStringTable (Private->ControllerNameTable);
-
- FreePool (Private);
- }
- }
-
- This->Stop (This, Handle, 0, NULL);
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-UnixSerialIoDriverBindingStop (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Handle,
- IN UINTN NumberOfChildren,
- IN EFI_HANDLE *ChildHandleBuffer
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- This - TODO: add argument description
- Handle - TODO: add argument description
- NumberOfChildren - TODO: add argument description
- ChildHandleBuffer - TODO: add argument description
-
-Returns:
-
- EFI_DEVICE_ERROR - TODO: Add description for return value
- EFI_SUCCESS - TODO: Add description for return value
-
---*/
-{
- EFI_STATUS Status;
- UINTN Index;
- BOOLEAN AllChildrenStopped;
- EFI_SERIAL_IO_PROTOCOL *SerialIo;
- UNIX_SERIAL_IO_PRIVATE_DATA *Private;
- EFI_UNIX_IO_PROTOCOL *UnixIo;
-
- //
- // Complete all outstanding transactions to Controller.
- // Don't allow any new transaction to Controller to be started.
- //
-
- if (NumberOfChildren == 0) {
- //
- // Close the bus driver
- //
- Status = gBS->CloseProtocol (
- Handle,
- &gEfiUnixIoProtocolGuid,
- This->DriverBindingHandle,
- Handle
- );
- Status = gBS->CloseProtocol (
- Handle,
- &gEfiDevicePathProtocolGuid,
- This->DriverBindingHandle,
- Handle
- );
- return Status;
- }
-
- AllChildrenStopped = TRUE;
-
- for (Index = 0; Index < NumberOfChildren; Index++) {
- Status = gBS->OpenProtocol (
- ChildHandleBuffer[Index],
- &gEfiSerialIoProtocolGuid,
- (VOID**)&SerialIo,
- This->DriverBindingHandle,
- Handle,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (!EFI_ERROR (Status)) {
- Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (SerialIo);
-
- ASSERT (Private->Handle == ChildHandleBuffer[Index]);
-
- Status = gBS->CloseProtocol (
- Handle,
- &gEfiUnixIoProtocolGuid,
- This->DriverBindingHandle,
- ChildHandleBuffer[Index]
- );
-
- Status = gBS->UninstallMultipleProtocolInterfaces (
- ChildHandleBuffer[Index],
- &gEfiSerialIoProtocolGuid,
- &Private->SerialIo,
- &gEfiDevicePathProtocolGuid,
- Private->DevicePath,
- NULL
- );
-
- if (EFI_ERROR (Status)) {
- gBS->OpenProtocol (
- Handle,
- &gEfiUnixIoProtocolGuid,
- (VOID **) &UnixIo,
- This->DriverBindingHandle,
- ChildHandleBuffer[Index],
- EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
- );
- } else {
- Private->UnixThunk->Close (Private->UnixHandle);
-
- FreePool (Private->DevicePath);
-
- FreeUnicodeStringTable (Private->ControllerNameTable);
-
- FreePool (Private);
- }
- }
-
- if (EFI_ERROR (Status)) {
- AllChildrenStopped = FALSE;
- }
- }
-
- if (!AllChildrenStopped) {
- return EFI_DEVICE_ERROR;
- }
-
- return EFI_SUCCESS;
-}
-
-//
-// Serial IO Protocol member functions
-//
-
-EFI_STATUS
-EFIAPI
-UnixSerialIoReset (
- IN EFI_SERIAL_IO_PROTOCOL *This
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- This - TODO: add argument description
-
-Returns:
-
- TODO: add return values
-
---*/
-{
- UNIX_SERIAL_IO_PRIVATE_DATA *Private;
- EFI_TPL Tpl;
- UINTN UnixStatus;
-
- Tpl = gBS->RaiseTPL (TPL_NOTIFY);
-
- Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This);
-
- UnixStatus = Private->UnixThunk->Tcflush (
- Private->UnixHandle,
- TCIOFLUSH
- );
- switch (UnixStatus) {
- case EBADF:
- DEBUG ((EFI_D_ERROR, "Invalid handle of serial device!\r\n"));
- return EFI_DEVICE_ERROR;
- case EINVAL:
- DEBUG ((EFI_D_ERROR, "Invalid queue selector!\r\n"));
- return EFI_DEVICE_ERROR;
- case ENOTTY:
- DEBUG ((EFI_D_ERROR, "The file associated with serial's handle is not a terminal!\r\n"));
- return EFI_DEVICE_ERROR;
- default:
- DEBUG ((EFI_D_ERROR, "The serial IO device is reset successfully!\r\n"));
- }
-
- gBS->RestoreTPL (Tpl);
-
- return This->SetAttributes (
- This,
- This->Mode->BaudRate,
- This->Mode->ReceiveFifoDepth,
- This->Mode->Timeout,
- This->Mode->Parity,
- (UINT8) This->Mode->DataBits,
- This->Mode->StopBits
- );
-}
-
-EFI_STATUS
-EFIAPI
-UnixSerialIoSetAttributes (
- IN EFI_SERIAL_IO_PROTOCOL *This,
- IN UINT64 BaudRate,
- IN UINT32 ReceiveFifoDepth,
- IN UINT32 Timeout,
- IN EFI_PARITY_TYPE Parity,
- IN UINT8 DataBits,
- IN EFI_STOP_BITS_TYPE StopBits
- )
-/*++
-
-Routine Description:
-
- This function is used to set the attributes.
-
-Arguments:
-
- This - A pointer to the EFI_SERIAL_IO_PROTOCOL structrue.
- BaudRate - The Baud rate of the serial device.
- ReceiveFifoDepth - The request depth of fifo on receive side.
- Timeout - the request timeout for a single charact.
- Parity - The type of parity used in serial device.
- DataBits - Number of deata bits used in serial device.
- StopBits - Number of stop bits used in serial device.
-
-Returns:
- Status code
-
- None
-
---*/
-{
- EFI_STATUS Status;
- UNIX_SERIAL_IO_PRIVATE_DATA *Private;
- EFI_TPL Tpl;
- EFI_DEVICE_PATH_PROTOCOL *NewDevicePath;
-
- Tpl = gBS->RaiseTPL (TPL_NOTIFY);
- Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This);
-
- //
- // Some of our arguments have defaults if a null value is passed in, and
- // we must set the default values if a null argument is passed in.
- //
- if (BaudRate == 0) {
- BaudRate = SERIAL_BAUD_DEFAULT;
- }
-
- if (ReceiveFifoDepth == 0) {
- ReceiveFifoDepth = SERIAL_FIFO_DEFAULT;
- }
-
- if (Timeout == 0) {
- Timeout = SERIAL_TIMEOUT_DEFAULT;
- }
-
- if (Parity == DefaultParity) {
- Parity = NoParity;
- }
-
- if (DataBits == 0) {
- DataBits = SERIAL_DATABITS_DEFAULT;
- }
-
- if (StopBits == DefaultStopBits) {
- StopBits = OneStopBit;
- }
-
- //
- // See if the new attributes already match the current attributes
- //
- if (Private->UartDevicePath.BaudRate == BaudRate &&
- Private->UartDevicePath.DataBits == DataBits &&
- Private->UartDevicePath.Parity == Parity &&
- Private->UartDevicePath.StopBits == StopBits &&
- Private->SerialIoMode.ReceiveFifoDepth == ReceiveFifoDepth &&
- Private->SerialIoMode.Timeout == Timeout ) {
- gBS->RestoreTPL(Tpl);
- return EFI_SUCCESS;
- }
-
- //
- // Try to get options from serial device.
- //
- if (Private->UnixThunk->Tcgetattr (Private->UnixHandle, &Private->UnixTermios) == -1) {
- Private->UnixThunk->Perror ("IoSetAttributes");
- gBS->RestoreTPL (Tpl);
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Setting Baud Rate
- //
- Private->UnixThunk->Cfsetispeed (&Private->UnixTermios, ConvertBaud2Unix(BaudRate));
- Private->UnixThunk->Cfsetospeed (&Private->UnixTermios, ConvertBaud2Unix(BaudRate));
- //
- // Setting DataBits
- //
- Private->UnixTermios.c_cflag &= ~CSIZE;
- Private->UnixTermios.c_cflag |= ConvertByteSize2Unix (DataBits);
- //
- // Setting Parity
- //
- ConvertParity2Unix (&Private->UnixTermios, Parity);
- //
- // Setting StopBits
- //
- ConvertStopBit2Unix (&Private->UnixTermios, StopBits);
- //
- // Raw input
- //
- Private->UnixTermios.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
- //
- // Raw output
- //
- Private->UnixTermios.c_oflag &= ~OPOST;
- //
- // Support hardware flow control
- //
- Private->UnixTermios.c_cflag &= ~CRTSCTS;;
- //
- // Time out
- //
- Private->UnixTermios.c_cc[VMIN] = 0;
- Private->UnixTermios.c_cc[VTIME] = (Timeout/1000000) * 10;
-
- //
- // Set the options
- //
- if (-1 == Private->UnixThunk->Tcsetattr (
- Private->UnixHandle,
- TCSANOW,
- &Private->UnixTermios
- )) {
- DEBUG ((EFI_D_INFO, "Fail to set options for serial device!\r\n"));
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Update mode
- //
- Private->SerialIoMode.BaudRate = BaudRate;
- Private->SerialIoMode.ReceiveFifoDepth = ReceiveFifoDepth;
- Private->SerialIoMode.Timeout = Timeout;
- Private->SerialIoMode.Parity = Parity;
- Private->SerialIoMode.DataBits = DataBits;
- Private->SerialIoMode.StopBits = StopBits;
- //
- // See if Device Path Node has actually changed
- //
- if (Private->UartDevicePath.BaudRate == BaudRate &&
- Private->UartDevicePath.DataBits == DataBits &&
- Private->UartDevicePath.Parity == Parity &&
- Private->UartDevicePath.StopBits == StopBits ) {
- gBS->RestoreTPL(Tpl);
- return EFI_SUCCESS;
- }
-
- //
- // Update the device path
- //
- Private->UartDevicePath.BaudRate = BaudRate;
- Private->UartDevicePath.DataBits = DataBits;
- Private->UartDevicePath.Parity = (UINT8) Parity;
- Private->UartDevicePath.StopBits = (UINT8) StopBits;
-
- NewDevicePath = AppendDevicePathNode (
- Private->ParentDevicePath,
- (EFI_DEVICE_PATH_PROTOCOL *) &Private->UartDevicePath
- );
- if (NewDevicePath == NULL) {
- gBS->RestoreTPL (Tpl);
- return EFI_DEVICE_ERROR;
- }
-
- if (Private->Handle != NULL) {
- Status = gBS->ReinstallProtocolInterface (
- Private->Handle,
- &gEfiDevicePathProtocolGuid,
- Private->DevicePath,
- NewDevicePath
- );
- if (EFI_ERROR (Status)) {
- gBS->RestoreTPL (Tpl);
- return Status;
- }
- }
-
- if (Private->DevicePath != NULL) {
- FreePool (Private->DevicePath);
- }
-
- Private->DevicePath = NewDevicePath;
-
- gBS->RestoreTPL (Tpl);
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-EFIAPI
-UnixSerialIoSetControl (
- IN EFI_SERIAL_IO_PROTOCOL *This,
- IN UINT32 Control
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- This - TODO: add argument description
- Control - TODO: add argument description
-
-Returns:
-
- EFI_DEVICE_ERROR - TODO: Add description for return value
- EFI_DEVICE_ERROR - TODO: Add description for return value
- EFI_SUCCESS - TODO: Add description for return value
-
---*/
-{
- UNIX_SERIAL_IO_PRIVATE_DATA *Private;
- UINTN Result;
- UINTN Status;
- struct termios Options;
- EFI_TPL Tpl;
-
- Tpl = gBS->RaiseTPL (TPL_NOTIFY);
-
- Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This);
-
- Result = Private->UnixThunk->IoCtl (Private->UnixHandle, TIOCMGET, &Status);
-
- if (Result == -1) {
- Private->UnixThunk->Perror ("SerialSetControl");
- gBS->RestoreTPL (Tpl);
- return EFI_DEVICE_ERROR;
- }
-
- Private->HardwareFlowControl = FALSE;
- Private->SoftwareLoopbackEnable = FALSE;
- Private->HardwareLoopbackEnable = FALSE;
-
- if (Control & EFI_SERIAL_REQUEST_TO_SEND) {
- Options.c_cflag |= TIOCM_RTS;
- }
-
- if (Control & EFI_SERIAL_DATA_TERMINAL_READY) {
- Options.c_cflag |= TIOCM_DTR;
- }
-
- if (Control & EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE) {
- Private->HardwareFlowControl = TRUE;
- }
-
- if (Control & EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE) {
- Private->SoftwareLoopbackEnable = TRUE;
- }
-
- if (Control & EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE) {
- Private->HardwareLoopbackEnable = TRUE;
- }
-
- Result = Private->UnixThunk->IoCtl (Private->UnixHandle, TIOCMSET, &Status);
-
- if (Result == -1) {
- Private->UnixThunk->Perror ("SerialSetControl");
- gBS->RestoreTPL (Tpl);
- return EFI_DEVICE_ERROR;
- }
-
- gBS->RestoreTPL (Tpl);
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-EFIAPI
-UnixSerialIoGetControl (
- IN EFI_SERIAL_IO_PROTOCOL *This,
- OUT UINT32 *Control
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- This - TODO: add argument description
- Control - TODO: add argument description
-
-Returns:
-
- EFI_DEVICE_ERROR - TODO: Add description for return value
- EFI_DEVICE_ERROR - TODO: Add description for return value
- EFI_DEVICE_ERROR - TODO: Add description for return value
- EFI_SUCCESS - TODO: Add description for return value
-
---*/
-{
- UNIX_SERIAL_IO_PRIVATE_DATA *Private;
- UINTN Result;
- UINTN Status;
- UINT32 Bits;
- EFI_TPL Tpl;
- UINTN Bytes;
-
- Tpl = gBS->RaiseTPL (TPL_NOTIFY);
-
- Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This);
- Result = Private->UnixThunk->IoCtl (Private->UnixHandle, TIOCMGET, &Status);
- if (Result == -1) {
- Private->UnixThunk->Perror ("SerialGetControl");
- gBS->RestoreTPL (Tpl);
- return EFI_DEVICE_ERROR;
- }
-
- if ((Status & TIOCM_CTS) == TIOCM_CTS) {
- Bits |= EFI_SERIAL_CLEAR_TO_SEND;
- }
-
- if ((Status & TIOCM_DSR) == TIOCM_DSR) {
- Bits |= EFI_SERIAL_DATA_SET_READY;
- }
-
- if ((Status & TIOCM_DTR) == TIOCM_DTR) {
- Bits |= EFI_SERIAL_DATA_TERMINAL_READY;
- }
-
- if ((Status & TIOCM_RTS) == TIOCM_RTS) {
- Bits |= EFI_SERIAL_REQUEST_TO_SEND;
- }
-
- if ((Status & TIOCM_RNG) == TIOCM_RNG) {
- Bits |= EFI_SERIAL_RING_INDICATE;
- }
-
- if ((Status & TIOCM_CAR) == TIOCM_CAR) {
- Bits |= EFI_SERIAL_CARRIER_DETECT;
- }
-
- if (Private->HardwareFlowControl) {
- Bits |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;
- }
-
- if (Private->SoftwareLoopbackEnable) {
- Bits |= EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE;
- }
-
- if (Private->HardwareLoopbackEnable) {
- Bits |= EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE;
- }
-
- Result = Private->UnixThunk->IoCtl (Private->UnixHandle, FIONREAD, &Bytes);
- if (Result == -1) {
- Private->UnixThunk->Perror ("SerialGetControl");
- gBS->RestoreTPL (Tpl);
- return EFI_DEVICE_ERROR;
- }
-
- if (Bytes == 0) {
- Bits |= EFI_SERIAL_INPUT_BUFFER_EMPTY;
- }
-
- *Control = Bits;
-
- gBS->RestoreTPL (Tpl);
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-EFIAPI
-UnixSerialIoWrite (
- IN EFI_SERIAL_IO_PROTOCOL *This,
- IN OUT UINTN *BufferSize,
- IN VOID *Buffer
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- This - TODO: add argument description
- BufferSize - TODO: add argument description
- Buffer - TODO: add argument description
-
-Returns:
-
- EFI_DEVICE_ERROR - TODO: Add description for return value
- EFI_SUCCESS - TODO: Add description for return value
-
---*/
-{
- UNIX_SERIAL_IO_PRIVATE_DATA *Private;
- UINT8 *ByteBuffer;
- UINT32 TotalBytesWritten;
- UINT32 BytesToGo;
- UINT32 BytesWritten;
- UINT32 Index;
- UINT32 Control;
- EFI_TPL Tpl;
-
- Tpl = gBS->RaiseTPL (TPL_NOTIFY);
-
- Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This);
-
- ByteBuffer = (UINT8 *) Buffer;
- TotalBytesWritten = 0;
-
- if (Private->SoftwareLoopbackEnable || Private->HardwareLoopbackEnable) {
- for (Index = 0; Index < *BufferSize; Index++) {
- if (IsaSerialFifoAdd (&Private->Fifo, ByteBuffer[Index]) == EFI_SUCCESS) {
- TotalBytesWritten++;
- } else {
- break;
- }
- }
- } else {
- BytesToGo = (*BufferSize);
-
- do {
- if (Private->HardwareFlowControl) {
- //
- // Send RTS
- //
- UnixSerialIoGetControl (&Private->SerialIo, &Control);
- Control |= EFI_SERIAL_REQUEST_TO_SEND;
- UnixSerialIoSetControl (&Private->SerialIo, Control);
- }
-
- //
- // Do the write
- //
- BytesWritten = Private->UnixThunk->Write (
- Private->UnixHandle,
- &ByteBuffer[TotalBytesWritten],
- BytesToGo
- );
-
- if (Private->HardwareFlowControl) {
- //
- // Assert RTS
- //
- UnixSerialIoGetControl (&Private->SerialIo, &Control);
- Control &= ~ (UINT32) EFI_SERIAL_REQUEST_TO_SEND;
- UnixSerialIoSetControl (&Private->SerialIo, Control);
- }
-
- TotalBytesWritten += BytesWritten;
- BytesToGo -= BytesWritten;
- } while (BytesToGo > 0);
- }
-
- *BufferSize = TotalBytesWritten;
-
- gBS->RestoreTPL (Tpl);
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-EFIAPI
-UnixSerialIoRead (
- IN EFI_SERIAL_IO_PROTOCOL *This,
- IN OUT UINTN *BufferSize,
- OUT VOID *Buffer
- )
-/*++
-
-Routine Description:
-
- TODO: Add function description
-
-Arguments:
-
- This - TODO: add argument description
- BufferSize - TODO: add argument description
- Buffer - TODO: add argument description
-
-Returns:
-
- EFI_DEVICE_ERROR - TODO: Add description for return value
-
---*/
-{
- UNIX_SERIAL_IO_PRIVATE_DATA *Private;
- UINT32 BytesRead;
- EFI_STATUS Status;
- UINT32 Index;
- UINT8 Data;
- UINT32 Control;
- EFI_TPL Tpl;
-
- Tpl = gBS->RaiseTPL (TPL_NOTIFY);
-
- Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This);
-
- //
- // Do the read
- //
- if (Private->SoftwareLoopbackEnable || Private->HardwareLoopbackEnable) {
- for (Index = 0, BytesRead = 0; Index < *BufferSize; Index++) {
- if (IsaSerialFifoRemove (&Private->Fifo, &Data) == EFI_SUCCESS) {
- ((UINT8 *) Buffer)[Index] = Data;
- BytesRead++;
- } else {
- break;
- }
- }
- } else {
- if (Private->HardwareFlowControl) {
- UnixSerialIoGetControl (&Private->SerialIo, &Control);
- Control |= EFI_SERIAL_DATA_TERMINAL_READY;
- UnixSerialIoSetControl (&Private->SerialIo, Control);
- }
-
- BytesRead = Private->UnixThunk->Read (Private->UnixHandle, Buffer, *BufferSize);
- if (Private->HardwareFlowControl) {
- UnixSerialIoGetControl (&Private->SerialIo, &Control);
- Control &= ~ (UINT32) EFI_SERIAL_DATA_TERMINAL_READY;
- UnixSerialIoSetControl (&Private->SerialIo, Control);
- }
-
- }
-
- if (BytesRead != *BufferSize) {
- Status = EFI_TIMEOUT;
- } else {
- Status = EFI_SUCCESS;
- }
-
- *BufferSize = (UINTN) BytesRead;
-
- gBS->RestoreTPL (Tpl);
-
- return Status;
-}
-
-BOOLEAN
-IsaSerialFifoFull (
- IN SERIAL_DEV_FIFO *Fifo
- )
-/*++
-
- Routine Description:
- Detect whether specific FIFO is full or not
-
- Arguments:
- Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO
-
- Returns:
- TRUE: the FIFO is full
- FALSE: the FIFO is not full
-
---*/
-{
- if (Fifo->Surplus == 0) {
- return TRUE;
- }
-
- return FALSE;
-}
-
-BOOLEAN
-IsaSerialFifoEmpty (
- IN SERIAL_DEV_FIFO *Fifo
- )
-/*++
-
- Routine Description:
- Detect whether specific FIFO is empty or not
-
- Arguments:
- Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO
-
- Returns:
- TRUE: the FIFO is empty
- FALSE: the FIFO is not empty
-
---*/
-{
- if (Fifo->Surplus == SERIAL_MAX_BUFFER_SIZE) {
- return TRUE;
- }
-
- return FALSE;
-}
-
-EFI_STATUS
-IsaSerialFifoAdd (
- IN SERIAL_DEV_FIFO *Fifo,
- IN UINT8 Data
- )
-/*++
-
- Routine Description:
- Add data to specific FIFO
-
- Arguments:
- Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO
- Data UINT8: the data added to FIFO
-
- Returns:
- EFI_SUCCESS: Add data to specific FIFO successfully
- EFI_OUT_RESOURCE: Failed to add data because FIFO is already full
-
---*/
-// TODO: EFI_OUT_OF_RESOURCES - add return value to function comment
-{
- //
- // if FIFO full can not add data
- //
- if (IsaSerialFifoFull (Fifo)) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- //
- // FIFO is not full can add data
- //
- Fifo->Data[Fifo->Last] = Data;
- Fifo->Surplus--;
- Fifo->Last++;
- if (Fifo->Last >= SERIAL_MAX_BUFFER_SIZE) {
- Fifo->Last = 0;
- }
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-IsaSerialFifoRemove (
- IN SERIAL_DEV_FIFO *Fifo,
- OUT UINT8 *Data
- )
-/*++
-
- Routine Description:
- Remove data from specific FIFO
-
- Arguments:
- Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO
- Data UINT8*: the data removed from FIFO
-
- Returns:
- EFI_SUCCESS: Remove data from specific FIFO successfully
- EFI_OUT_RESOURCE: Failed to remove data because FIFO is empty
-
---*/
-// TODO: EFI_OUT_OF_RESOURCES - add return value to function comment
-{
- //
- // if FIFO is empty, no data can remove
- //
- if (IsaSerialFifoEmpty (Fifo)) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- //
- // FIFO is not empty, can remove data
- //
- *Data = Fifo->Data[Fifo->First];
- Fifo->Surplus++;
- Fifo->First++;
- if (Fifo->First >= SERIAL_MAX_BUFFER_SIZE) {
- Fifo->First = 0;
- }
-
- return EFI_SUCCESS;
-}
|