diff options
Diffstat (limited to 'IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/Ata.c')
| -rw-r--r-- | IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/Ata.c | 36 |
1 files changed, 18 insertions, 18 deletions
diff --git a/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/Ata.c b/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/Ata.c index 98d9323ea7..b627f25413 100644 --- a/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/Ata.c +++ b/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/Ata.c @@ -1281,7 +1281,7 @@ AtaPioDataInExt ( return CheckErrorStatus (IdeDev);
}
/**
- Send ATA Ext command into device with NON_DATA protocol
+ Send ATA Ext command into device with NON_DATA protocol.
@param IdeDev Standard IDE device private data structure
@param AtaCommand The ATA command to be sent
@@ -2027,7 +2027,7 @@ AtaReadSectorsExt ( @param IdeBlkIoDevice Indicates the calling context.
@param MediaId The media id that the read request is for.
- @param LBA The starting logical block address to read from on the device.
+ @param Lba The starting logical block address to read from on the device.
@param BufferSize The size of the Buffer in bytes. This must be a multiple
of the intrinsic block size of the device.
@@ -2052,7 +2052,7 @@ EFI_STATUS AtaBlkIoReadBlocks (
IN IDE_BLK_IO_DEV *IdeBlkIoDevice,
IN UINT32 MediaId,
- IN EFI_LBA LBA,
+ IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
)
@@ -2092,11 +2092,11 @@ AtaBlkIoReadBlocks ( return EFI_NO_MEDIA;
}
- if (LBA > Media->LastBlock) {
+ if (Lba > Media->LastBlock) {
return EFI_INVALID_PARAMETER;
}
- if ((LBA + NumberOfBlocks - 1) > Media->LastBlock) {
+ if ((Lba + NumberOfBlocks - 1) > Media->LastBlock) {
return EFI_INVALID_PARAMETER;
}
@@ -2110,18 +2110,18 @@ AtaBlkIoReadBlocks ( // For ATA/ATAPI-6 device(capcity > 120GB), use ATA-6 read block mechanism
//
if (IdeBlkIoDevice->UdmaMode.Valid) {
- Status = AtaUdmaReadExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);
+ Status = AtaUdmaReadExt (IdeBlkIoDevice, Buffer, Lba, NumberOfBlocks);
} else {
- Status = AtaReadSectorsExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);
+ Status = AtaReadSectorsExt (IdeBlkIoDevice, Buffer, Lba, NumberOfBlocks);
}
} else {
//
// For ATA-3 compatible device, use ATA-3 read block mechanism
//
if (IdeBlkIoDevice->UdmaMode.Valid) {
- Status = AtaUdmaRead (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);
+ Status = AtaUdmaRead (IdeBlkIoDevice, Buffer, Lba, NumberOfBlocks);
} else {
- Status = AtaReadSectors (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);
+ Status = AtaReadSectors (IdeBlkIoDevice, Buffer, Lba, NumberOfBlocks);
}
}
@@ -2419,7 +2419,7 @@ AtaWriteSectorsExt ( @param IdeBlkIoDevice Indicates the calling context.
@param MediaId The media id that the write request is for.
- @param LBA The starting logical block address to write onto the device.
+ @param Lba The starting logical block address to write onto the device.
@param BufferSize The size of the Buffer in bytes. This must be a multiple
of the intrinsic block size of the device.
@param Buffer A pointer to the source buffer for the data.The caller
@@ -2443,7 +2443,7 @@ EFI_STATUS AtaBlkIoWriteBlocks (
IN IDE_BLK_IO_DEV *IdeBlkIoDevice,
IN UINT32 MediaId,
- IN EFI_LBA LBA,
+ IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
)
@@ -2479,11 +2479,11 @@ AtaBlkIoWriteBlocks ( return EFI_BAD_BUFFER_SIZE;
}
- if (LBA > Media->LastBlock) {
+ if (Lba > Media->LastBlock) {
return EFI_INVALID_PARAMETER;
}
- if ((LBA + NumberOfBlocks - 1) > Media->LastBlock) {
+ if ((Lba + NumberOfBlocks - 1) > Media->LastBlock) {
return EFI_INVALID_PARAMETER;
}
@@ -2497,18 +2497,18 @@ AtaBlkIoWriteBlocks ( // For ATA/ATAPI-6 device(capcity > 120GB), use ATA-6 write block mechanism
//
if (IdeBlkIoDevice->UdmaMode.Valid) {
- Status = AtaUdmaWriteExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);
+ Status = AtaUdmaWriteExt (IdeBlkIoDevice, Buffer, Lba, NumberOfBlocks);
} else {
- Status = AtaWriteSectorsExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);
+ Status = AtaWriteSectorsExt (IdeBlkIoDevice, Buffer, Lba, NumberOfBlocks);
}
} else {
//
// For ATA-3 compatible device, use ATA-3 write block mechanism
//
if (IdeBlkIoDevice->UdmaMode.Valid) {
- Status = AtaUdmaWrite (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);
+ Status = AtaUdmaWrite (IdeBlkIoDevice, Buffer, Lba, NumberOfBlocks);
} else {
- Status = AtaWriteSectors (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);
+ Status = AtaWriteSectors (IdeBlkIoDevice, Buffer, Lba, NumberOfBlocks);
}
}
@@ -2619,7 +2619,7 @@ AtaNonDataCommandIn ( }
//
- // Select device (bit4), set LBA mode(bit6) (use 0xe0 for compatibility)
+ // Select device (bit4), set Lba mode(bit6) (use 0xe0 for compatibility)
//
IDEWritePortB (
IdeDev->PciIo,
|