diff options
Diffstat (limited to 'OldMdePkg/Include/Protocol/ScsiPassThru.h')
| -rw-r--r-- | OldMdePkg/Include/Protocol/ScsiPassThru.h | 312 |
1 files changed, 0 insertions, 312 deletions
diff --git a/OldMdePkg/Include/Protocol/ScsiPassThru.h b/OldMdePkg/Include/Protocol/ScsiPassThru.h deleted file mode 100644 index a5aa6c47c0..0000000000 --- a/OldMdePkg/Include/Protocol/ScsiPassThru.h +++ /dev/null @@ -1,312 +0,0 @@ -/** @file
- SCSI Pass Through protocol.
-
- Copyright (c) 2006, Intel Corporation
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
- Module Name: ScsiPassThru.h
-
-**/
-
-#ifndef __SCSI_PASS_THROUGH_H__
-#define __SCSI_PASS_THROUGH_H__
-
-#define EFI_SCSI_PASS_THRU_PROTOCOL_GUID \
- { \
- 0xa59e8fcf, 0xbda0, 0x43bb, {0x90, 0xb1, 0xd3, 0x73, 0x2e, 0xca, 0xa8, 0x77 } \
- }
-
-//
-// Forward reference for pure ANSI compatability
-//
-typedef struct _EFI_SCSI_PASS_THRU_PROTOCOL EFI_SCSI_PASS_THRU_PROTOCOL;
-
-#define EFI_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL 0x0001
-#define EFI_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL 0x0002
-#define EFI_SCSI_PASS_THRU_ATTRIBUTES_NONBLOCKIO 0x0004
-
-//
-// SCSI Host Adapter Status definition
-//
-#define EFI_SCSI_STATUS_HOST_ADAPTER_OK 0x00
-#define EFI_SCSI_STATUS_HOST_ADAPTER_TIMEOUT_COMMAND 0x09 // timeout when processing the command
-#define EFI_SCSI_STATUS_HOST_ADAPTER_TIMEOUT 0x0b // timeout when waiting for the command processing
-#define EFI_SCSI_STATUS_HOST_ADAPTER_MESSAGE_REJECT 0x0d // a message reject was received when processing command
-#define EFI_SCSI_STATUS_HOST_ADAPTER_BUS_RESET 0x0e // a bus reset was detected
-#define EFI_SCSI_STATUS_HOST_ADAPTER_PARITY_ERROR 0x0f
-#define EFI_SCSI_STATUS_HOST_ADAPTER_REQUEST_SENSE_FAILED 0x10 // the adapter failed in issuing request sense command
-#define EFI_SCSI_STATUS_HOST_ADAPTER_SELECTION_TIMEOUT 0x11 // selection timeout
-#define EFI_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN 0x12 // data overrun or data underrun
-#define EFI_SCSI_STATUS_HOST_ADAPTER_BUS_FREE 0x13 // Unexepected bus free
-#define EFI_SCSI_STATUS_HOST_ADAPTER_PHASE_ERROR 0x14 // Target bus phase sequence failure
-#define EFI_SCSI_STATUS_HOST_ADAPTER_OTHER 0x7f
-
-//
-// SCSI Target Status definition
-//
-#define EFI_SCSI_STATUS_TARGET_GOOD 0x00
-#define EFI_SCSI_STATUS_TARGET_CHECK_CONDITION 0x02 // check condition
-#define EFI_SCSI_STATUS_TARGET_CONDITION_MET 0x04 // condition met
-#define EFI_SCSI_STATUS_TARGET_BUSY 0x08 // busy
-#define EFI_SCSI_STATUS_TARGET_INTERMEDIATE 0x10 // intermediate
-#define EFI_SCSI_STATUS_TARGET_INTERMEDIATE_CONDITION_MET 0x14 // intermediate-condition met
-#define EFI_SCSI_STATUS_TARGET_RESERVATION_CONFLICT 0x18 // reservation conflict
-#define EFI_SCSI_STATUS_TARGET_COMMOND_TERMINATED 0x22 // command terminated
-#define EFI_SCSI_STATUS_TARGET_QUEUE_FULL 0x28 // queue full
-
-typedef struct {
- UINT64 Timeout;
- VOID *DataBuffer;
- VOID *SenseData;
- VOID *Cdb;
- UINT32 TransferLength;
- UINT8 CdbLength;
- UINT8 DataDirection;
- UINT8 HostAdapterStatus;
- UINT8 TargetStatus;
- UINT8 SenseDataLength;
-} EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET;
-
-typedef struct {
- CHAR16 *ControllerName;
- CHAR16 *ChannelName;
- UINT32 AdapterId;
- UINT32 Attributes;
- UINT32 IoAlign;
-} EFI_SCSI_PASS_THRU_MODE;
-
-/**
- Sends a SCSI Request Packet to a SCSI device that is attached to
- the SCSI channel. This function supports both blocking I/O and
- non-blocking I/O. The blocking I/O functionality is required,
- and the non-blocking I/O functionality is optional.
-
- @param This Protocol instance pointer.
- @param Target The Target ID of the SCSI device to
- send the SCSI Request Packet.
- @param Lun The LUN of the SCSI device to send the
- SCSI Request Packet.
- @param Packet A pointer to the SCSI Request Packet to send
- to the SCSI device specified by Target and Lun.
- @param Event If non-blocking I/O is not supported then Event
- is ignored, and blocking I/O is performed.
- If Event is NULL, then blocking I/O is performed.
- If Event is not NULL and non blocking I/O is
- supported, then non-blocking I/O is performed,
- and Event will be signaled when the SCSI Request
- Packet completes
-
- @retval EFI_SUCCESS The SCSI Request Packet was sent by the host, and
- TransferLength bytes were transferred to/from
- DataBuffer.See HostAdapterStatus, TargetStatus,
- SenseDataLength,and SenseData in that order
- for additional status information.
- @retval EFI_WARN_BUFFER_TOO_SMALL The SCSI Request Packet was executed, but the
- entire DataBuffer could not be transferred.
- The actual number of bytes transferred is returned
- in TransferLength. See HostAdapterStatus,
- TargetStatus, SenseDataLength, and SenseData in
- that order for additional status information.
- @retval EFI_NOT_READY The SCSI Request Packet could not be sent because
- there are too many SCSI Request Packets already
- queued. The caller may retry again later.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to send
- the SCSI Request Packet. See HostAdapterStatus,
- TargetStatus, SenseDataLength, and SenseData in
- that order for additional status information.
- @retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket
- are invalid. The SCSI Request Packet was not sent,
- so no additional status information is available.
- @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet
- is not supported by the host adapter. The SCSI
- Request Packet was not sent, so no additional
- status information is available.
- @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI
- Request Packet to execute. See HostAdapterStatus,
- TargetStatus, SenseDataLength, and SenseData in
- that order for additional status information.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SCSI_PASS_THRU_PASSTHRU) (
- IN EFI_SCSI_PASS_THRU_PROTOCOL *This,
- IN UINT32 Target,
- IN UINT64 Lun,
- IN OUT EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
- IN EFI_EVENT Event OPTIONAL
- )
-;
-
-/**
- Used to retrieve the list of legal Target IDs for SCSI devices
- on a SCSI channel.
-
- @param This Protocol instance pointer.
- @param Target On input, a pointer to the Target ID of a
- SCSI device present on the SCSI channel.
- On output, a pointer to the Target ID of
- the next SCSI device present on a SCSI channel.
- An input value of 0xFFFFFFFF retrieves the
- Target ID of the first SCSI device present on
- a SCSI channel.
- @param Lun On input, a pointer to the LUN of a SCSI device
- present on the SCSI channel.On output, a pointer
- to the LUN of the next SCSI device present on a
- SCSI channel.
-
- @retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI
- channel was returned in Target and Lun.
- @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
- @retval EFI_INVALID_PARAMETER Target is not 0xFFFFFFFF, and Target and Lun were
- not returned on a previous call to GetNextDevice().
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SCSI_PASS_THRU_GET_NEXT_DEVICE) (
- IN EFI_SCSI_PASS_THRU_PROTOCOL *This,
- IN OUT UINT32 *Target,
- IN OUT UINT64 *Lun
- )
-;
-
-/**
- Used to allocate and build a device path node for a SCSI device
- on a SCSI channel.
-
- @param This Protocol instance pointer.
- @param Target The Target ID of the SCSI device for which
- a device path node is to be allocated and built.
- @param Lun The LUN of the SCSI device for which a device
- path node is to be allocated and built.
- @param DevicePath A pointer to a single device path node that
- describes the SCSI device specified by
- Target and Lun. This function is responsible
- for allocating the buffer DevicePath with the boot
- service AllocatePool(). It is the caller's
- responsibility to free DevicePath when the caller
- is finished with DevicePath.
-
- @retval EFI_SUCCESS The device path node that describes the SCSI device
- specified by Target and Lun was allocated and
- returned in DevicePath.
- @retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does
- not exist on the SCSI channel.
- @retval EFI_INVALID_PARAMETER DevicePath is NULL.
- @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate
- DevicePath.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SCSI_PASS_THRU_BUILD_DEVICE_PATH) (
- IN EFI_SCSI_PASS_THRU_PROTOCOL *This,
- IN UINT32 Target,
- IN UINT64 Lun,
- IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
- )
-;
-
-/**
- Used to translate a device path node to a Target ID and LUN.
-
- @param This Protocol instance pointer.
- @param DevicePath A pointer to the device path node that
- describes a SCSI device on the SCSI channel.
- @param Target A pointer to the Target ID of a SCSI device
- on the SCSI channel.
- @param Lun A pointer to the LUN of a SCSI device on
- the SCSI channel.
-
- @retval EFI_SUCCESS DevicePath was successfully translated to a
- Target ID and LUN, and they were returned
- in Target and Lun.
- @retval EFI_INVALID_PARAMETER DevicePath is NULL.
- @retval EFI_INVALID_PARAMETER Target is NULL.
- @retval EFI_INVALID_PARAMETER Lun is NULL.
- @retval EFI_UNSUPPORTED This driver does not support the device path
- node type in DevicePath.
- @retval EFI_NOT_FOUND A valid translation from DevicePath to a
- Target ID and LUN does not exist.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SCSI_PASS_THRU_GET_TARGET_LUN) (
- IN EFI_SCSI_PASS_THRU_PROTOCOL *This,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- OUT UINT32 *Target,
- OUT UINT64 *Lun
- )
-;
-
-/**
- Resets a SCSI channel.This operation resets all the
- SCSI devices connected to the SCSI channel.
-
- @param This Protocol instance pointer.
-
- @retval EFI_SUCCESS The SCSI channel was reset.
- @retval EFI_UNSUPPORTED The SCSI channel does not support
- a channel reset operation.
- @retval EFI_DEVICE_ERROR A device error occurred while
- attempting to reset the SCSI channel.
- @retval EFI_TIMEOUT A timeout occurred while attempting
- to reset the SCSI channel.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SCSI_PASS_THRU_RESET_CHANNEL) (
- IN EFI_SCSI_PASS_THRU_PROTOCOL *This
- )
-;
-
-/**
- Resets a SCSI device that is connected to a SCSI channel.
-
- @param This Protocol instance pointer.
- @param Target The Target ID of the SCSI device to reset.
- @param Lun The LUN of the SCSI device to reset.
-
- @retval EFI_SUCCESS The SCSI device specified by Target and
- Lun was reset.
- @retval EFI_UNSUPPORTED The SCSI channel does not support a target
- reset operation.
- @retval EFI_INVALID_PARAMETER Target or Lun are invalid.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting
- to reset the SCSI device specified by Target
- and Lun.
- @retval EFI_TIMEOUT A timeout occurred while attempting to reset
- the SCSI device specified by Target and Lun.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SCSI_PASS_THRU_RESET_TARGET) (
- IN EFI_SCSI_PASS_THRU_PROTOCOL *This,
- IN UINT32 Target,
- IN UINT64 Lun
- )
-;
-
-struct _EFI_SCSI_PASS_THRU_PROTOCOL {
- EFI_SCSI_PASS_THRU_MODE *Mode;
- EFI_SCSI_PASS_THRU_PASSTHRU PassThru;
- EFI_SCSI_PASS_THRU_GET_NEXT_DEVICE GetNextDevice;
- EFI_SCSI_PASS_THRU_BUILD_DEVICE_PATH BuildDevicePath;
- EFI_SCSI_PASS_THRU_GET_TARGET_LUN GetTargetLun;
- EFI_SCSI_PASS_THRU_RESET_CHANNEL ResetChannel;
- EFI_SCSI_PASS_THRU_RESET_TARGET ResetTarget;
-};
-
-extern EFI_GUID gEfiScsiPassThruProtocolGuid;
-
-#endif
|