diff options
Diffstat (limited to 'OldMdePkg/Library/PeiIoLibCpuIo')
-rw-r--r-- | OldMdePkg/Library/PeiIoLibCpuIo/IoHighLevel.c | 2272 | ||||
-rw-r--r-- | OldMdePkg/Library/PeiIoLibCpuIo/IoLib.c | 550 | ||||
-rw-r--r-- | OldMdePkg/Library/PeiIoLibCpuIo/IoLibMmioBuffer.c | 409 | ||||
-rw-r--r-- | OldMdePkg/Library/PeiIoLibCpuIo/PeiIoLibCpuIo.msa | 51 |
4 files changed, 0 insertions, 3282 deletions
diff --git a/OldMdePkg/Library/PeiIoLibCpuIo/IoHighLevel.c b/OldMdePkg/Library/PeiIoLibCpuIo/IoHighLevel.c deleted file mode 100644 index ed09b4e5aa..0000000000 --- a/OldMdePkg/Library/PeiIoLibCpuIo/IoHighLevel.c +++ /dev/null @@ -1,2272 +0,0 @@ -/** @file
- High-level Io/Mmio functions.
-
- All assertions for bit field operations are handled bit field functions in the
- Base Library.
-
- Copyright (c) 2006, Intel Corporation<BR>
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
- Module Name: IoHighLevel.c
-
- The following IoLib instances share the same version of this file:
-
- BaseIoLibIntrinsic
- DxeIoLibCpuIo
- PeiIoLibCpuIo
-
-**/
-
-/**
- Reads an 8-bit I/O port, performs a bitwise inclusive OR, and writes the
- result back to the 8-bit I/O port.
-
- Reads the 8-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 8-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoOr8 (
- IN UINTN Port,
- IN UINT8 OrData
- )
-{
- return IoWrite8 (Port, (UINT8) (IoRead8 (Port) | OrData));
-}
-
-/**
- Reads an 8-bit I/O port, performs a bitwise AND, and writes the result back
- to the 8-bit I/O port.
-
- Reads the 8-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 8-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoAnd8 (
- IN UINTN Port,
- IN UINT8 AndData
- )
-{
- return IoWrite8 (Port, (UINT8) (IoRead8 (Port) & AndData));
-}
-
-/**
- Reads an 8-bit I/O port, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 8-bit I/O port.
-
- Reads the 8-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, performs a bitwise OR
- between the result of the AND operation and the value specified by OrData,
- and writes the result to the 8-bit I/O port specified by Port. The value
- written to the I/O port is returned. This function must guarantee that all
- I/O read and write operations are serialized.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoAndThenOr8 (
- IN UINTN Port,
- IN UINT8 AndData,
- IN UINT8 OrData
- )
-{
- return IoWrite8 (Port, (UINT8) ((IoRead8 (Port) & AndData) | OrData));
-}
-
-/**
- Reads a bit field of an I/O register.
-
- Reads the bit field in an 8-bit I/O register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
-
- @return The value read.
-
-**/
-UINT8
-EFIAPI
-IoBitFieldRead8 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit
- )
-{
- return BitFieldRead8 (IoRead8 (Port), StartBit, EndBit);
-}
-
-/**
- Writes a bit field to an I/O register.
-
- Writes Value to the bit field of the I/O register. The bit field is specified
- by the StartBit and the EndBit. All other bits in the destination I/O
- register are preserved. The value written to the I/O port is returned. Extra
- left bits in Value are stripped.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param Value New value of the bit field.
-
- @return The value written back to the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoBitFieldWrite8 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 Value
- )
-{
- return IoWrite8 (
- Port,
- BitFieldWrite8 (IoRead8 (Port), StartBit, EndBit, Value)
- );
-}
-
-/**
- Reads a bit field in an 8-bit port, performs a bitwise OR, and writes the
- result back to the bit field in the 8-bit port.
-
- Reads the 8-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 8-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized. Extra left bits in OrData are stripped.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoBitFieldOr8 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 OrData
- )
-{
- return IoWrite8 (
- Port,
- BitFieldOr8 (IoRead8 (Port), StartBit, EndBit, OrData)
- );
-}
-
-/**
- Reads a bit field in an 8-bit port, performs a bitwise AND, and writes the
- result back to the bit field in the 8-bit port.
-
- Reads the 8-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 8-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized. Extra left bits in AndData are stripped.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoBitFieldAnd8 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 AndData
- )
-{
- return IoWrite8 (
- Port,
- BitFieldAnd8 (IoRead8 (Port), StartBit, EndBit, AndData)
- );
-}
-
-/**
- Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
- bitwise inclusive OR, and writes the result back to the bit field in the
- 8-bit port.
-
- Reads the 8-bit I/O port specified by Port, performs a bitwise AND followed
- by a bitwise inclusive OR between the read result and the value specified by
- AndData, and writes the result to the 8-bit I/O port specified by Port. The
- value written to the I/O port is returned. This function must guarantee that
- all I/O read and write operations are serialized. Extra left bits in both
- AndData and OrData are stripped.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoBitFieldAndThenOr8 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 AndData,
- IN UINT8 OrData
- )
-{
- return IoWrite8 (
- Port,
- BitFieldAndThenOr8 (IoRead8 (Port), StartBit, EndBit, AndData, OrData)
- );
-}
-
-/**
- Reads a 16-bit I/O port, performs a bitwise inclusive OR, and writes the
- result back to the 16-bit I/O port.
-
- Reads the 16-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 16-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoOr16 (
- IN UINTN Port,
- IN UINT16 OrData
- )
-{
- return IoWrite16 (Port, (UINT16) (IoRead16 (Port) | OrData));
-}
-
-/**
- Reads a 16-bit I/O port, performs a bitwise AND, and writes the result back
- to the 16-bit I/O port.
-
- Reads the 16-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 16-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoAnd16 (
- IN UINTN Port,
- IN UINT16 AndData
- )
-{
- return IoWrite16 (Port, (UINT16) (IoRead16 (Port) & AndData));
-}
-
-/**
- Reads a 16-bit I/O port, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 16-bit I/O port.
-
- Reads the 16-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, performs a bitwise OR
- between the result of the AND operation and the value specified by OrData,
- and writes the result to the 16-bit I/O port specified by Port. The value
- written to the I/O port is returned. This function must guarantee that all
- I/O read and write operations are serialized.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoAndThenOr16 (
- IN UINTN Port,
- IN UINT16 AndData,
- IN UINT16 OrData
- )
-{
- return IoWrite16 (Port, (UINT16) ((IoRead16 (Port) & AndData) | OrData));
-}
-
-/**
- Reads a bit field of an I/O register.
-
- Reads the bit field in a 16-bit I/O register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
-
- @return The value read.
-
-**/
-UINT16
-EFIAPI
-IoBitFieldRead16 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit
- )
-{
- return BitFieldRead16 (IoRead16 (Port), StartBit, EndBit);
-}
-
-/**
- Writes a bit field to an I/O register.
-
- Writes Value to the bit field of the I/O register. The bit field is specified
- by the StartBit and the EndBit. All other bits in the destination I/O
- register are preserved. The value written to the I/O port is returned. Extra
- left bits in Value are stripped.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param Value New value of the bit field.
-
- @return The value written back to the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoBitFieldWrite16 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 Value
- )
-{
- return IoWrite16 (
- Port,
- BitFieldWrite16 (IoRead16 (Port), StartBit, EndBit, Value)
- );
-}
-
-/**
- Reads a bit field in a 16-bit port, performs a bitwise OR, and writes the
- result back to the bit field in the 16-bit port.
-
- Reads the 16-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 16-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized. Extra left bits in OrData are stripped.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoBitFieldOr16 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 OrData
- )
-{
- return IoWrite16 (
- Port,
- BitFieldOr16 (IoRead16 (Port), StartBit, EndBit, OrData)
- );
-}
-
-/**
- Reads a bit field in a 16-bit port, performs a bitwise AND, and writes the
- result back to the bit field in the 16-bit port.
-
- Reads the 16-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 16-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized. Extra left bits in AndData are stripped.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoBitFieldAnd16 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 AndData
- )
-{
- return IoWrite16 (
- Port,
- BitFieldAnd16 (IoRead16 (Port), StartBit, EndBit, AndData)
- );
-}
-
-/**
- Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
- bitwise inclusive OR, and writes the result back to the bit field in the
- 16-bit port.
-
- Reads the 16-bit I/O port specified by Port, performs a bitwise AND followed
- by a bitwise inclusive OR between the read result and the value specified by
- AndData, and writes the result to the 16-bit I/O port specified by Port. The
- value written to the I/O port is returned. This function must guarantee that
- all I/O read and write operations are serialized. Extra left bits in both
- AndData and OrData are stripped.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoBitFieldAndThenOr16 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 AndData,
- IN UINT16 OrData
- )
-{
- return IoWrite16 (
- Port,
- BitFieldAndThenOr16 (IoRead16 (Port), StartBit, EndBit, AndData, OrData)
- );
-}
-
-/**
- Reads a 32-bit I/O port, performs a bitwise inclusive OR, and writes the
- result back to the 32-bit I/O port.
-
- Reads the 32-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 32-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoOr32 (
- IN UINTN Port,
- IN UINT32 OrData
- )
-{
- return IoWrite32 (Port, IoRead32 (Port) | OrData);
-}
-
-/**
- Reads a 32-bit I/O port, performs a bitwise AND, and writes the result back
- to the 32-bit I/O port.
-
- Reads the 32-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 32-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoAnd32 (
- IN UINTN Port,
- IN UINT32 AndData
- )
-{
- return IoWrite32 (Port, IoRead32 (Port) & AndData);
-}
-
-/**
- Reads a 32-bit I/O port, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 32-bit I/O port.
-
- Reads the 32-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, performs a bitwise OR
- between the result of the AND operation and the value specified by OrData,
- and writes the result to the 32-bit I/O port specified by Port. The value
- written to the I/O port is returned. This function must guarantee that all
- I/O read and write operations are serialized.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoAndThenOr32 (
- IN UINTN Port,
- IN UINT32 AndData,
- IN UINT32 OrData
- )
-{
- return IoWrite32 (Port, (IoRead32 (Port) & AndData) | OrData);
-}
-
-/**
- Reads a bit field of an I/O register.
-
- Reads the bit field in a 32-bit I/O register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
-
- @return The value read.
-
-**/
-UINT32
-EFIAPI
-IoBitFieldRead32 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit
- )
-{
- return BitFieldRead32 (IoRead32 (Port), StartBit, EndBit);
-}
-
-/**
- Writes a bit field to an I/O register.
-
- Writes Value to the bit field of the I/O register. The bit field is specified
- by the StartBit and the EndBit. All other bits in the destination I/O
- register are preserved. The value written to the I/O port is returned. Extra
- left bits in Value are stripped.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param Value New value of the bit field.
-
- @return The value written back to the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoBitFieldWrite32 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 Value
- )
-{
- return IoWrite32 (
- Port,
- BitFieldWrite32 (IoRead32 (Port), StartBit, EndBit, Value)
- );
-}
-
-/**
- Reads a bit field in a 32-bit port, performs a bitwise OR, and writes the
- result back to the bit field in the 32-bit port.
-
- Reads the 32-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 32-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized. Extra left bits in OrData are stripped.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoBitFieldOr32 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 OrData
- )
-{
- return IoWrite32 (
- Port,
- BitFieldOr32 (IoRead32 (Port), StartBit, EndBit, OrData)
- );
-}
-
-/**
- Reads a bit field in a 32-bit port, performs a bitwise AND, and writes the
- result back to the bit field in the 32-bit port.
-
- Reads the 32-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 32-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized. Extra left bits in AndData are stripped.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoBitFieldAnd32 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 AndData
- )
-{
- return IoWrite32 (
- Port,
- BitFieldAnd32 (IoRead32 (Port), StartBit, EndBit, AndData)
- );
-}
-
-/**
- Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
- bitwise inclusive OR, and writes the result back to the bit field in the
- 32-bit port.
-
- Reads the 32-bit I/O port specified by Port, performs a bitwise AND followed
- by a bitwise inclusive OR between the read result and the value specified by
- AndData, and writes the result to the 32-bit I/O port specified by Port. The
- value written to the I/O port is returned. This function must guarantee that
- all I/O read and write operations are serialized. Extra left bits in both
- AndData and OrData are stripped.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoBitFieldAndThenOr32 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 AndData,
- IN UINT32 OrData
- )
-{
- return IoWrite32 (
- Port,
- BitFieldAndThenOr32 (IoRead32 (Port), StartBit, EndBit, AndData, OrData)
- );
-}
-
-/**
- Reads a 64-bit I/O port, performs a bitwise inclusive OR, and writes the
- result back to the 64-bit I/O port.
-
- Reads the 64-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 64-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoOr64 (
- IN UINTN Port,
- IN UINT64 OrData
- )
-{
- return IoWrite64 (Port, IoRead64 (Port) | OrData);
-}
-
-/**
- Reads a 64-bit I/O port, performs a bitwise AND, and writes the result back
- to the 64-bit I/O port.
-
- Reads the 64-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 64-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoAnd64 (
- IN UINTN Port,
- IN UINT64 AndData
- )
-{
- return IoWrite64 (Port, IoRead64 (Port) & AndData);
-}
-
-/**
- Reads a 64-bit I/O port, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 64-bit I/O port.
-
- Reads the 64-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, performs a bitwise OR
- between the result of the AND operation and the value specified by OrData,
- and writes the result to the 64-bit I/O port specified by Port. The value
- written to the I/O port is returned. This function must guarantee that all
- I/O read and write operations are serialized.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoAndThenOr64 (
- IN UINTN Port,
- IN UINT64 AndData,
- IN UINT64 OrData
- )
-{
- return IoWrite64 (Port, (IoRead64 (Port) & AndData) | OrData);
-}
-
-/**
- Reads a bit field of an I/O register.
-
- Reads the bit field in a 64-bit I/O register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
-
- @return The value read.
-
-**/
-UINT64
-EFIAPI
-IoBitFieldRead64 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit
- )
-{
- return BitFieldRead64 (IoRead64 (Port), StartBit, EndBit);
-}
-
-/**
- Writes a bit field to an I/O register.
-
- Writes Value to the bit field of the I/O register. The bit field is specified
- by the StartBit and the EndBit. All other bits in the destination I/O
- register are preserved. The value written to the I/O port is returned. Extra
- left bits in Value are stripped.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param Value New value of the bit field.
-
- @return The value written back to the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoBitFieldWrite64 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 Value
- )
-{
- return IoWrite64 (
- Port,
- BitFieldWrite64 (IoRead64 (Port), StartBit, EndBit, Value)
- );
-}
-
-/**
- Reads a bit field in a 64-bit port, performs a bitwise OR, and writes the
- result back to the bit field in the 64-bit port.
-
- Reads the 64-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 64-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized. Extra left bits in OrData are stripped.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoBitFieldOr64 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 OrData
- )
-{
- return IoWrite64 (
- Port,
- BitFieldOr64 (IoRead64 (Port), StartBit, EndBit, OrData)
- );
-}
-
-/**
- Reads a bit field in a 64-bit port, performs a bitwise AND, and writes the
- result back to the bit field in the 64-bit port.
-
- Reads the 64-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 64-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized. Extra left bits in AndData are stripped.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoBitFieldAnd64 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 AndData
- )
-{
- return IoWrite64 (
- Port,
- BitFieldAnd64 (IoRead64 (Port), StartBit, EndBit, AndData)
- );
-}
-
-/**
- Reads a bit field in a 64-bit port, performs a bitwise AND followed by a
- bitwise inclusive OR, and writes the result back to the bit field in the
- 64-bit port.
-
- Reads the 64-bit I/O port specified by Port, performs a bitwise AND followed
- by a bitwise inclusive OR between the read result and the value specified by
- AndData, and writes the result to the 64-bit I/O port specified by Port. The
- value written to the I/O port is returned. This function must guarantee that
- all I/O read and write operations are serialized. Extra left bits in both
- AndData and OrData are stripped.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoBitFieldAndThenOr64 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 AndData,
- IN UINT64 OrData
- )
-{
- return IoWrite64 (
- Port,
- BitFieldAndThenOr64 (IoRead64 (Port), StartBit, EndBit, AndData, OrData)
- );
-}
-
-/**
- Reads an 8-bit MMIO register, performs a bitwise inclusive OR, and writes the
- result back to the 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 8-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param OrData The value to OR with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioOr8 (
- IN UINTN Address,
- IN UINT8 OrData
- )
-{
- return MmioWrite8 (Address, (UINT8) (MmioRead8 (Address) | OrData));
-}
-
-/**
- Reads an 8-bit MMIO register, performs a bitwise AND, and writes the result
- back to the 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 8-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioAnd8 (
- IN UINTN Address,
- IN UINT8 AndData
- )
-{
- return MmioWrite8 (Address, (UINT8) (MmioRead8 (Address) & AndData));
-}
-
-/**
- Reads an 8-bit MMIO register, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, performs a
- bitwise OR between the result of the AND operation and the value specified by
- OrData, and writes the result to the 8-bit MMIO register specified by
- Address. The value written to the MMIO register is returned. This function
- must guarantee that all MMIO read and write operations are serialized.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
-
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioAndThenOr8 (
- IN UINTN Address,
- IN UINT8 AndData,
- IN UINT8 OrData
- )
-{
- return MmioWrite8 (Address, (UINT8) ((MmioRead8 (Address) & AndData) | OrData));
-}
-
-/**
- Reads a bit field of a MMIO register.
-
- Reads the bit field in an 8-bit MMIO register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
-
- @return The value read.
-
-**/
-UINT8
-EFIAPI
-MmioBitFieldRead8 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit
- )
-{
- return BitFieldRead8 (MmioRead8 (Address), StartBit, EndBit);
-}
-
-/**
- Writes a bit field to a MMIO register.
-
- Writes Value to the bit field of the MMIO register. The bit field is
- specified by the StartBit and the EndBit. All other bits in the destination
- MMIO register are preserved. The new value of the 8-bit register is returned.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param Value New value of the bit field.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioBitFieldWrite8 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 Value
- )
-{
- return MmioWrite8 (
- Address,
- BitFieldWrite8 (MmioRead8 (Address), StartBit, EndBit, Value)
- );
-}
-
-/**
- Reads a bit field in an 8-bit MMIO register, performs a bitwise OR, and
- writes the result back to the bit field in the 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 8-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized. Extra left bits in OrData
- are stripped.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param OrData The value to OR with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioBitFieldOr8 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 OrData
- )
-{
- return MmioWrite8 (
- Address,
- BitFieldOr8 (MmioRead8 (Address), StartBit, EndBit, OrData)
- );
-}
-
-/**
- Reads a bit field in an 8-bit MMIO register, performs a bitwise AND, and
- writes the result back to the bit field in the 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 8-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized. Extra left bits in AndData are
- stripped.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param AndData The value to AND with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioBitFieldAnd8 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 AndData
- )
-{
- return MmioWrite8 (
- Address,
- BitFieldAnd8 (MmioRead8 (Address), StartBit, EndBit, AndData)
- );
-}
-
-/**
- Reads a bit field in an 8-bit MMIO register, performs a bitwise AND followed
- by a bitwise inclusive OR, and writes the result back to the bit field in the
- 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address, performs a bitwise AND
- followed by a bitwise inclusive OR between the read result and the value
- specified by AndData, and writes the result to the 8-bit MMIO register
- specified by Address. The value written to the MMIO register is returned.
- This function must guarantee that all MMIO read and write operations are
- serialized. Extra left bits in both AndData and OrData are stripped.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param AndData The value to AND with read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioBitFieldAndThenOr8 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 AndData,
- IN UINT8 OrData
- )
-{
- return MmioWrite8 (
- Address,
- BitFieldAndThenOr8 (MmioRead8 (Address), StartBit, EndBit, AndData, OrData)
- );
-}
-
-/**
- Reads a 16-bit MMIO register, performs a bitwise inclusive OR, and writes the
- result back to the 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 16-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param OrData The value to OR with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioOr16 (
- IN UINTN Address,
- IN UINT16 OrData
- )
-{
- return MmioWrite16 (Address, (UINT16) (MmioRead16 (Address) | OrData));
-}
-
-/**
- Reads a 16-bit MMIO register, performs a bitwise AND, and writes the result
- back to the 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 16-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioAnd16 (
- IN UINTN Address,
- IN UINT16 AndData
- )
-{
- return MmioWrite16 (Address, (UINT16) (MmioRead16 (Address) & AndData));
-}
-
-/**
- Reads a 16-bit MMIO register, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, performs a
- bitwise OR between the result of the AND operation and the value specified by
- OrData, and writes the result to the 16-bit MMIO register specified by
- Address. The value written to the MMIO register is returned. This function
- must guarantee that all MMIO read and write operations are serialized.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
-
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioAndThenOr16 (
- IN UINTN Address,
- IN UINT16 AndData,
- IN UINT16 OrData
- )
-{
- return MmioWrite16 (Address, (UINT16) ((MmioRead16 (Address) & AndData) | OrData));
-}
-
-/**
- Reads a bit field of a MMIO register.
-
- Reads the bit field in a 16-bit MMIO register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
-
- @return The value read.
-
-**/
-UINT16
-EFIAPI
-MmioBitFieldRead16 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit
- )
-{
- return BitFieldRead16 (MmioRead16 (Address), StartBit, EndBit);
-}
-
-/**
- Writes a bit field to a MMIO register.
-
- Writes Value to the bit field of the MMIO register. The bit field is
- specified by the StartBit and the EndBit. All other bits in the destination
- MMIO register are preserved. The new value of the 16-bit register is returned.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param Value New value of the bit field.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioBitFieldWrite16 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 Value
- )
-{
- return MmioWrite16 (
- Address,
- BitFieldWrite16 (MmioRead16 (Address), StartBit, EndBit, Value)
- );
-}
-
-/**
- Reads a bit field in a 16-bit MMIO register, performs a bitwise OR, and
- writes the result back to the bit field in the 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 16-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized. Extra left bits in OrData
- are stripped.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param OrData The value to OR with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioBitFieldOr16 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 OrData
- )
-{
- return MmioWrite16 (
- Address,
- BitFieldOr16 (MmioRead16 (Address), StartBit, EndBit, OrData)
- );
-}
-
-/**
- Reads a bit field in a 16-bit MMIO register, performs a bitwise AND, and
- writes the result back to the bit field in the 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 16-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized. Extra left bits in AndData are
- stripped.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param AndData The value to AND with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioBitFieldAnd16 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 AndData
- )
-{
- return MmioWrite16 (
- Address,
- BitFieldAnd16 (MmioRead16 (Address), StartBit, EndBit, AndData)
- );
-}
-
-/**
- Reads a bit field in a 16-bit MMIO register, performs a bitwise AND followed
- by a bitwise inclusive OR, and writes the result back to the bit field in the
- 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address, performs a bitwise AND
- followed by a bitwise inclusive OR between the read result and the value
- specified by AndData, and writes the result to the 16-bit MMIO register
- specified by Address. The value written to the MMIO register is returned.
- This function must guarantee that all MMIO read and write operations are
- serialized. Extra left bits in both AndData and OrData are stripped.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param AndData The value to AND with read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioBitFieldAndThenOr16 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 AndData,
- IN UINT16 OrData
- )
-{
- return MmioWrite16 (
- Address,
- BitFieldAndThenOr16 (MmioRead16 (Address), StartBit, EndBit, AndData, OrData)
- );
-}
-
-/**
- Reads a 32-bit MMIO register, performs a bitwise inclusive OR, and writes the
- result back to the 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 32-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param OrData The value to OR with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioOr32 (
- IN UINTN Address,
- IN UINT32 OrData
- )
-{
- return MmioWrite32 (Address, MmioRead32 (Address) | OrData);
-}
-
-/**
- Reads a 32-bit MMIO register, performs a bitwise AND, and writes the result
- back to the 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 32-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioAnd32 (
- IN UINTN Address,
- IN UINT32 AndData
- )
-{
- return MmioWrite32 (Address, MmioRead32 (Address) & AndData);
-}
-
-/**
- Reads a 32-bit MMIO register, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, performs a
- bitwise OR between the result of the AND operation and the value specified by
- OrData, and writes the result to the 32-bit MMIO register specified by
- Address. The value written to the MMIO register is returned. This function
- must guarantee that all MMIO read and write operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
-
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioAndThenOr32 (
- IN UINTN Address,
- IN UINT32 AndData,
- IN UINT32 OrData
- )
-{
- return MmioWrite32 (Address, (MmioRead32 (Address) & AndData) | OrData);
-}
-
-/**
- Reads a bit field of a MMIO register.
-
- Reads the bit field in a 32-bit MMIO register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
-
- @return The value read.
-
-**/
-UINT32
-EFIAPI
-MmioBitFieldRead32 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit
- )
-{
- return BitFieldRead32 (MmioRead32 (Address), StartBit, EndBit);
-}
-
-/**
- Writes a bit field to a MMIO register.
-
- Writes Value to the bit field of the MMIO register. The bit field is
- specified by the StartBit and the EndBit. All other bits in the destination
- MMIO register are preserved. The new value of the 32-bit register is returned.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param Value New value of the bit field.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioBitFieldWrite32 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 Value
- )
-{
- return MmioWrite32 (
- Address,
- BitFieldWrite32 (MmioRead32 (Address), StartBit, EndBit, Value)
- );
-}
-
-/**
- Reads a bit field in a 32-bit MMIO register, performs a bitwise OR, and
- writes the result back to the bit field in the 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 32-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized. Extra left bits in OrData
- are stripped.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param OrData The value to OR with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioBitFieldOr32 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 OrData
- )
-{
- return MmioWrite32 (
- Address,
- BitFieldOr32 (MmioRead32 (Address), StartBit, EndBit, OrData)
- );
-}
-
-/**
- Reads a bit field in a 32-bit MMIO register, performs a bitwise AND, and
- writes the result back to the bit field in the 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 32-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized. Extra left bits in AndData are
- stripped.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param AndData The value to AND with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioBitFieldAnd32 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 AndData
- )
-{
- return MmioWrite32 (
- Address,
- BitFieldAnd32 (MmioRead32 (Address), StartBit, EndBit, AndData)
- );
-}
-
-/**
- Reads a bit field in a 32-bit MMIO register, performs a bitwise AND followed
- by a bitwise inclusive OR, and writes the result back to the bit field in the
- 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address, performs a bitwise AND
- followed by a bitwise inclusive OR between the read result and the value
- specified by AndData, and writes the result to the 32-bit MMIO register
- specified by Address. The value written to the MMIO register is returned.
- This function must guarantee that all MMIO read and write operations are
- serialized. Extra left bits in both AndData and OrData are stripped.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param AndData The value to AND with read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioBitFieldAndThenOr32 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 AndData,
- IN UINT32 OrData
- )
-{
- return MmioWrite32 (
- Address,
- BitFieldAndThenOr32 (MmioRead32 (Address), StartBit, EndBit, AndData, OrData)
- );
-}
-
-/**
- Reads a 64-bit MMIO register, performs a bitwise inclusive OR, and writes the
- result back to the 64-bit MMIO register.
-
- Reads the 64-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 64-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param OrData The value to OR with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioOr64 (
- IN UINTN Address,
- IN UINT64 OrData
- )
-{
- return MmioWrite64 (Address, MmioRead64 (Address) | OrData);
-}
-
-/**
- Reads a 64-bit MMIO register, performs a bitwise AND, and writes the result
- back to the 64-bit MMIO register.
-
- Reads the 64-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 64-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioAnd64 (
- IN UINTN Address,
- IN UINT64 AndData
- )
-{
- return MmioWrite64 (Address, MmioRead64 (Address) & AndData);
-}
-
-/**
- Reads a 64-bit MMIO register, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 64-bit MMIO register.
-
- Reads the 64-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, performs a
- bitwise OR between the result of the AND operation and the value specified by
- OrData, and writes the result to the 64-bit MMIO register specified by
- Address. The value written to the MMIO register is returned. This function
- must guarantee that all MMIO read and write operations are serialized.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
-
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioAndThenOr64 (
- IN UINTN Address,
- IN UINT64 AndData,
- IN UINT64 OrData
- )
-{
- return MmioWrite64 (Address, (MmioRead64 (Address) & AndData) | OrData);
-}
-
-/**
- Reads a bit field of a MMIO register.
-
- Reads the bit field in a 64-bit MMIO register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
-
- @return The value read.
-
-**/
-UINT64
-EFIAPI
-MmioBitFieldRead64 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit
- )
-{
- return BitFieldRead64 (MmioRead64 (Address), StartBit, EndBit);
-}
-
-/**
- Writes a bit field to a MMIO register.
-
- Writes Value to the bit field of the MMIO register. The bit field is
- specified by the StartBit and the EndBit. All other bits in the destination
- MMIO register are preserved. The new value of the 64-bit register is returned.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param Value New value of the bit field.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioBitFieldWrite64 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 Value
- )
-{
- return MmioWrite64 (
- Address,
- BitFieldWrite64 (MmioRead64 (Address), StartBit, EndBit, Value)
- );
-}
-
-/**
- Reads a bit field in a 64-bit MMIO register, performs a bitwise OR, and
- writes the result back to the bit field in the 64-bit MMIO register.
-
- Reads the 64-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 64-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized. Extra left bits in OrData
- are stripped.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param OrData The value to OR with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioBitFieldOr64 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 OrData
- )
-{
- return MmioWrite64 (
- Address,
- BitFieldOr64 (MmioRead64 (Address), StartBit, EndBit, OrData)
- );
-}
-
-/**
- Reads a bit field in a 64-bit MMIO register, performs a bitwise AND, and
- writes the result back to the bit field in the 64-bit MMIO register.
-
- Reads the 64-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 64-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized. Extra left bits in AndData are
- stripped.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param AndData The value to AND with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioBitFieldAnd64 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 AndData
- )
-{
- return MmioWrite64 (
- Address,
- BitFieldAnd64 (MmioRead64 (Address), StartBit, EndBit, AndData)
- );
-}
-
-/**
- Reads a bit field in a 64-bit MMIO register, performs a bitwise AND followed
- by a bitwise inclusive OR, and writes the result back to the bit field in the
- 64-bit MMIO register.
-
- Reads the 64-bit MMIO register specified by Address, performs a bitwise AND
- followed by a bitwise inclusive OR between the read result and the value
- specified by AndData, and writes the result to the 64-bit MMIO register
- specified by Address. The value written to the MMIO register is returned.
- This function must guarantee that all MMIO read and write operations are
- serialized. Extra left bits in both AndData and OrData are stripped.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param AndData The value to AND with read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioBitFieldAndThenOr64 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 AndData,
- IN UINT64 OrData
- )
-{
- return MmioWrite64 (
- Address,
- BitFieldAndThenOr64 (MmioRead64 (Address), StartBit, EndBit, AndData, OrData)
- );
-}
diff --git a/OldMdePkg/Library/PeiIoLibCpuIo/IoLib.c b/OldMdePkg/Library/PeiIoLibCpuIo/IoLib.c deleted file mode 100644 index 1da0203b5c..0000000000 --- a/OldMdePkg/Library/PeiIoLibCpuIo/IoLib.c +++ /dev/null @@ -1,550 +0,0 @@ -/** @file
- I/O Library.
-
- Copyright (c) 2006, Intel Corporation<BR>
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
- Module Name: IoLib.c
-
-**/
-
-/**
- Reads an 8-bit I/O port.
-
- Reads the 8-bit I/O port specified by Port. The 8-bit read value is returned.
- This function must guarantee that all I/O read and write operations are
- serialized.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to read.
-
- @return The value read.
-
-**/
-UINT8
-EFIAPI
-IoRead8 (
- IN UINTN Port
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
-
- return CpuIo->IoRead8 (PeiServices, CpuIo, (UINT64) Port);
-}
-
-/**
- Writes an 8-bit I/O port.
-
- Writes the 8-bit I/O port specified by Port with the value specified by Value
- and returns Value. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param Value The value to write to the I/O port.
-
- @return The value written the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoWrite8 (
- IN UINTN Port,
- IN UINT8 Value
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
-
- CpuIo->IoWrite8 (PeiServices, CpuIo, (UINT64) Port, Value);
- return Value;
-}
-
-/**
- Reads a 16-bit I/O port.
-
- Reads the 16-bit I/O port specified by Port. The 16-bit read value is returned.
- This function must guarantee that all I/O read and write operations are
- serialized.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to read.
-
- @return The value read.
-
-**/
-UINT16
-EFIAPI
-IoRead16 (
- IN UINTN Port
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
- //
- // Make sure Port is aligned on a 16-bit boundary.
- //
- ASSERT ((Port & 1) == 0);
- return CpuIo->IoRead16 (PeiServices, CpuIo, (UINT64) Port);
-}
-
-/**
- Writes a 16-bit I/O port.
-
- Writes the 16-bit I/O port specified by Port with the value specified by Value
- and returns Value. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param Value The value to write to the I/O port.
-
- @return The value written the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoWrite16 (
- IN UINTN Port,
- IN UINT16 Value
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
- //
- // Make sure Port is aligned on a 16-bit boundary.
- //
- ASSERT ((Port & 1) == 0);
- CpuIo->IoWrite16 (PeiServices, CpuIo, (UINT64) Port, Value);
- return Value;
-}
-
-/**
- Reads a 32-bit I/O port.
-
- Reads the 32-bit I/O port specified by Port. The 32-bit read value is returned.
- This function must guarantee that all I/O read and write operations are
- serialized.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to read.
-
- @return The value read.
-
-**/
-UINT32
-EFIAPI
-IoRead32 (
- IN UINTN Port
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
- //
- // Make sure Port is aligned on a 32-bit boundary.
- //
- ASSERT ((Port & 3) == 0);
- return CpuIo->IoRead32 (PeiServices, CpuIo, (UINT64) Port);
-}
-
-/**
- Writes a 32-bit I/O port.
-
- Writes the 32-bit I/O port specified by Port with the value specified by Value
- and returns Value. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param Value The value to write to the I/O port.
-
- @return The value written the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoWrite32 (
- IN UINTN Port,
- IN UINT32 Value
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
- //
- // Make sure Port is aligned on a 32-bit boundary.
- //
- ASSERT ((Port & 3) == 0);
- CpuIo->IoWrite32 (PeiServices, CpuIo, (UINT64) Port, Value);
- return Value;
-}
-
-/**
- Reads a 64-bit I/O port.
-
- Reads the 64-bit I/O port specified by Port. The 64-bit read value is returned.
- This function must guarantee that all I/O read and write operations are
- serialized.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to read.
-
- @return The value read.
-
-**/
-UINT64
-EFIAPI
-IoRead64 (
- IN UINTN Port
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
- //
- // Make sure Port is aligned on a 64-bit boundary.
- //
- ASSERT ((Port & 7) == 0);
- return CpuIo->IoRead64 (PeiServices, CpuIo, (UINT64) Port);
-}
-
-/**
- Writes a 64-bit I/O port.
-
- Writes the 64-bit I/O port specified by Port with the value specified by Value
- and returns Value. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param Value The value to write to the I/O port.
-
- @return The value written the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoWrite64 (
- IN UINTN Port,
- IN UINT64 Value
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
- //
- // Make sure Port is aligned on a 64-bit boundary.
- //
- ASSERT ((Port & 7) == 0);
- CpuIo->IoWrite64 (PeiServices, CpuIo, (UINT64) Port, Value);
- return Value;;
-}
-
-/**
- Reads an 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address. The 8-bit read value is
- returned. This function must guarantee that all MMIO read and write
- operations are serialized.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT8
-EFIAPI
-MmioRead8 (
- IN UINTN Address
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
-
- return CpuIo->MemRead8 (PeiServices, CpuIo, (UINT64) Address);
-}
-
-/**
- Writes an 8-bit MMIO register.
-
- Writes the 8-bit MMIO register specified by Address with the value specified
- by Value and returns Value. This function must guarantee that all MMIO read
- and write operations are serialized.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param Value The value to write to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioWrite8 (
- IN UINTN Address,
- IN UINT8 Value
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
-
- CpuIo->MemWrite8 (PeiServices, CpuIo, (UINT64) Address, Value);
- return Value;
-}
-
-/**
- Reads a 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address. The 16-bit read value is
- returned. This function must guarantee that all MMIO read and write
- operations are serialized.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT16
-EFIAPI
-MmioRead16 (
- IN UINTN Address
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
- //
- // Make sure Address is aligned on a 16-bit boundary.
- //
- ASSERT ((Address & 1) == 0);
- return CpuIo->MemRead16 (PeiServices, CpuIo, (UINT64) Address);
-
-}
-
-/**
- Writes a 16-bit MMIO register.
-
- Writes the 16-bit MMIO register specified by Address with the value specified
- by Value and returns Value. This function must guarantee that all MMIO read
- and write operations are serialized.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param Value The value to write to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioWrite16 (
- IN UINTN Address,
- IN UINT16 Value
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
- //
- // Make sure Address is aligned on a 16-bit boundary.
- //
- ASSERT ((Address & 1) == 0);
- CpuIo->MemWrite16 (PeiServices, CpuIo, (UINT64) Address, Value);
- return Value;
-}
-
-/**
- Reads a 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address. The 32-bit read value is
- returned. This function must guarantee that all MMIO read and write
- operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT32
-EFIAPI
-MmioRead32 (
- IN UINTN Address
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
- //
- // Make sure Address is aligned on a 32-bit boundary.
- //
- ASSERT ((Address & 3) == 0);
- return CpuIo->MemRead32 (PeiServices, CpuIo, (UINT64) Address);
-
-}
-
-/**
- Writes a 32-bit MMIO register.
-
- Writes the 32-bit MMIO register specified by Address with the value specified
- by Value and returns Value. This function must guarantee that all MMIO read
- and write operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param Value The value to write to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioWrite32 (
- IN UINTN Address,
- IN UINT32 Value
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
- //
- // Make sure Address is aligned on a 32-bit boundary.
- //
- ASSERT ((Address & 3) == 0);
- CpuIo->MemWrite32 (PeiServices, CpuIo, (UINT64) Address, Value);
- return Value;
-}
-
-/**
- Reads a 64-bit MMIO register.
-
- Reads the 64-bit MMIO register specified by Address. The 64-bit read value is
- returned. This function must guarantee that all MMIO read and write
- operations are serialized.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT64
-EFIAPI
-MmioRead64 (
- IN UINTN Address
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
- //
- // Make sure Address is aligned on a 64-bit boundary.
- //
- ASSERT ((Address & 7) == 0);
- return CpuIo->MemRead64 (PeiServices, CpuIo, (UINT64) Address);
-
-}
-
-/**
- Writes a 64-bit MMIO register.
-
- Writes the 64-bit MMIO register specified by Address with the value specified
- by Value and returns Value. This function must guarantee that all MMIO read
- and write operations are serialized.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param Value The value to write to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioWrite64 (
- IN UINTN Address,
- IN UINT64 Value
- )
-{
- EFI_PEI_SERVICES **PeiServices;
- EFI_PEI_CPU_IO_PPI *CpuIo;
-
- PeiServices = GetPeiServicesTablePointer ();
- CpuIo = (*PeiServices)->CpuIo;
- ASSERT (CpuIo != NULL);
- //
- // Make sure Address is aligned on a 64-bit boundary.
- //
- ASSERT ((Address & 7) == 0);
- CpuIo->MemWrite64 (PeiServices, CpuIo, (UINT64) Address, Value);
- return Value;
-}
diff --git a/OldMdePkg/Library/PeiIoLibCpuIo/IoLibMmioBuffer.c b/OldMdePkg/Library/PeiIoLibCpuIo/IoLibMmioBuffer.c deleted file mode 100644 index b8e6d83665..0000000000 --- a/OldMdePkg/Library/PeiIoLibCpuIo/IoLibMmioBuffer.c +++ /dev/null @@ -1,409 +0,0 @@ -/** @file
- I/O Library MMIO Buffer Functions.
-
- Copyright (c) 2007, Intel Corporation<BR>
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-/**
- Copy data from MMIO region to system memory by using 8-bit access.
-
- Copy data from MMIO region specified by starting address StartAddress
- to system memory specified by Buffer by using 8-bit access. The total
- number of byte to be copied is specified by Length. Buffer is returned.
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().
-
-
- @param StartAddress Starting address for the MMIO region to be copied from.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer receiving the data read.
-
- @return Buffer
-
-**/
-UINT8 *
-EFIAPI
-MmioReadBuffer8 (
- IN UINTN StartAddress,
- IN UINTN Length,
- OUT UINT8 *Buffer
- )
-{
- UINT8 *ReturnBuffer;
-
- ASSERT ((Length - 1) <= (MAX_ADDRESS - StartAddress));
- ASSERT ((Length - 1) <= (MAX_ADDRESS - (UINTN) Buffer));
-
- ReturnBuffer = Buffer;
-
- while (Length--) {
- *(Buffer++) = MmioRead8 (StartAddress++);
- }
-
- return ReturnBuffer;
-}
-
-/**
- Copy data from MMIO region to system memory by using 16-bit access.
-
- Copy data from MMIO region specified by starting address StartAddress
- to system memory specified by Buffer by using 16-bit access. The total
- number of byte to be copied is specified by Length. Buffer is returned.
-
- If StartAddress is not aligned on a 16-bit boundary, then ASSERT().
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().
-
- If Length is not aligned on a 16-bit boundary, then ASSERT().
- If Buffer is not aligned on a 16-bit boundary, then ASSERT().
-
- @param StartAddress Starting address for the MMIO region to be copied from.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer receiving the data read.
-
- @return Buffer
-
-**/
-UINT16 *
-EFIAPI
-MmioReadBuffer16 (
- IN UINTN StartAddress,
- IN UINTN Length,
- OUT UINT16 *Buffer
- )
-{
- UINT16 *ReturnBuffer;
-
- ASSERT ((StartAddress & (sizeof (UINT16) - 1)) == 0);
-
- ASSERT ((Length - 1) <= (MAX_ADDRESS - StartAddress));
- ASSERT ((Length - 1) <= (MAX_ADDRESS - (UINTN) Buffer));
-
- ASSERT ((Length & (sizeof (UINT16) - 1)) == 0);
- ASSERT (((UINTN) Buffer & (sizeof (UINT16) - 1)) == 0);
-
- ReturnBuffer = Buffer;
-
- while (Length) {
- *(Buffer++) = MmioRead16 (StartAddress);
- StartAddress += sizeof (UINT16);
- Length -= sizeof (UINT16);
- }
-
- return ReturnBuffer;
-}
-
-/**
- Copy data from MMIO region to system memory by using 32-bit access.
-
- Copy data from MMIO region specified by starting address StartAddress
- to system memory specified by Buffer by using 32-bit access. The total
- number of byte to be copied is specified by Length. Buffer is returned.
-
- If StartAddress is not aligned on a 32-bit boundary, then ASSERT().
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().
-
- If Length is not aligned on a 32-bit boundary, then ASSERT().
- If Buffer is not aligned on a 32-bit boundary, then ASSERT().
-
- @param StartAddress Starting address for the MMIO region to be copied from.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer receiving the data read.
-
- @return Buffer
-
-**/
-UINT32 *
-EFIAPI
-MmioReadBuffer32 (
- IN UINTN StartAddress,
- IN UINTN Length,
- OUT UINT32 *Buffer
- )
-{
- UINT32 *ReturnBuffer;
-
- ASSERT ((StartAddress & (sizeof (UINT32) - 1)) == 0);
-
- ASSERT ((Length - 1) <= (MAX_ADDRESS - StartAddress));
- ASSERT ((Length - 1) <= (MAX_ADDRESS - (UINTN) Buffer));
-
- ASSERT ((Length & (sizeof (UINT32) - 1)) == 0);
- ASSERT (((UINTN) Buffer & (sizeof (UINT32) - 1)) == 0);
-
- ReturnBuffer = Buffer;
-
- while (Length) {
- *(Buffer++) = MmioRead32 (StartAddress);
- StartAddress += sizeof (UINT32);
- Length -= sizeof (UINT32);
- }
-
- return ReturnBuffer;
-}
-
-/**
- Copy data from MMIO region to system memory by using 64-bit access.
-
- Copy data from MMIO region specified by starting address StartAddress
- to system memory specified by Buffer by using 64-bit access. The total
- number of byte to be copied is specified by Length. Buffer is returned.
-
- If StartAddress is not aligned on a 64-bit boundary, then ASSERT().
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().
-
- If Length is not aligned on a 64-bit boundary, then ASSERT().
- If Buffer is not aligned on a 64-bit boundary, then ASSERT().
-
- @param StartAddress Starting address for the MMIO region to be copied from.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer receiving the data read.
-
- @return Buffer
-
-**/
-UINT64 *
-EFIAPI
-MmioReadBuffer64 (
- IN UINTN StartAddress,
- IN UINTN Length,
- OUT UINT64 *Buffer
- )
-{
- UINT64 *ReturnBuffer;
-
- ASSERT ((StartAddress & (sizeof (UINT64) - 1)) == 0);
-
- ASSERT ((Length - 1) <= (MAX_ADDRESS - StartAddress));
- ASSERT ((Length - 1) <= (MAX_ADDRESS - (UINTN) Buffer));
-
- ASSERT ((Length & (sizeof (UINT64) - 1)) == 0);
- ASSERT (((UINTN) Buffer & (sizeof (UINT64) - 1)) == 0);
-
- ReturnBuffer = Buffer;
-
- while (Length) {
- *(Buffer++) = MmioRead64 (StartAddress);
- StartAddress += sizeof (UINT64);
- Length -= sizeof (UINT64);
- }
-
- return ReturnBuffer;
-}
-
-
-/**
- Copy data from system memory to MMIO region by using 8-bit access.
-
- Copy data from system memory specified by Buffer to MMIO region specified
- by starting address StartAddress by using 8-bit access. The total number
- of byte to be copied is specified by Length. Buffer is returned.
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS -Buffer + 1), then ASSERT().
-
-
- @param StartAddress Starting address for the MMIO region to be copied to.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer containing the data to write.
-
- @return Size in bytes of the copy.
-
-**/
-UINT8 *
-EFIAPI
-MmioWriteBuffer8 (
- IN UINTN StartAddress,
- IN UINTN Length,
- IN CONST UINT8 *Buffer
- )
-{
- VOID* ReturnBuffer;
-
- ASSERT ((Length - 1) <= (MAX_ADDRESS - StartAddress));
- ASSERT ((Length - 1) <= (MAX_ADDRESS - (UINTN) Buffer));
-
- ReturnBuffer = (UINT8 *) Buffer;
-
- while (Length--) {
- MmioWrite8 (StartAddress++, *(Buffer++));
- }
-
- return ReturnBuffer;
-
-}
-
-/**
- Copy data from system memory to MMIO region by using 16-bit access.
-
- Copy data from system memory specified by Buffer to MMIO region specified
- by starting address StartAddress by using 16-bit access. The total number
- of byte to be copied is specified by Length. Length is returned.
-
- If StartAddress is not aligned on a 16-bit boundary, then ASSERT().
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS -Buffer + 1), then ASSERT().
-
- If Length is not aligned on a 16-bit boundary, then ASSERT().
-
- If Buffer is not aligned on a 16-bit boundary, then ASSERT().
-
- @param StartAddress Starting address for the MMIO region to be copied to.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer containing the data to write.
-
- @return Size in bytes of the copy.
-
-**/
-UINT16 *
-EFIAPI
-MmioWriteBuffer16 (
- IN UINTN StartAddress,
- IN UINTN Length,
- IN CONST UINT16 *Buffer
- )
-{
- UINT16 *ReturnBuffer;
-
- ASSERT ((StartAddress & (sizeof (UINT16) - 1)) == 0);
-
- ASSERT ((Length - 1) <= (MAX_ADDRESS - StartAddress));
- ASSERT ((Length - 1) <= (MAX_ADDRESS - (UINTN) Buffer));
-
- ASSERT ((Length & (sizeof (UINT16) - 1)) == 0);
- ASSERT (((UINTN) Buffer & (sizeof (UINT16) - 1)) == 0);
-
- ReturnBuffer = (UINT16 *) Buffer;
-
- while (Length) {
- MmioWrite16 (StartAddress, *(Buffer++));
-
- StartAddress += sizeof (UINT16);
- Length -= sizeof (UINT16);
- }
-
- return ReturnBuffer;
-}
-
-
-/**
- Copy data from system memory to MMIO region by using 32-bit access.
-
- Copy data from system memory specified by Buffer to MMIO region specified
- by starting address StartAddress by using 32-bit access. The total number
- of byte to be copied is specified by Length. Length is returned.
-
- If StartAddress is not aligned on a 32-bit boundary, then ASSERT().
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS -Buffer + 1), then ASSERT().
-
- If Length is not aligned on a 32-bit boundary, then ASSERT().
-
- If Buffer is not aligned on a 32-bit boundary, then ASSERT().
-
- @param StartAddress Starting address for the MMIO region to be copied to.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer containing the data to write.
-
- @return Size in bytes of the copy.
-
-**/
-UINT32 *
-EFIAPI
-MmioWriteBuffer32 (
- IN UINTN StartAddress,
- IN UINTN Length,
- IN CONST UINT32 *Buffer
- )
-{
- UINT32 *ReturnBuffer;
-
- ASSERT ((StartAddress & (sizeof (UINT32) - 1)) == 0);
-
- ASSERT ((Length - 1) <= (MAX_ADDRESS - StartAddress));
- ASSERT ((Length - 1) <= (MAX_ADDRESS - (UINTN) Buffer));
-
- ASSERT ((Length & (sizeof (UINT32) - 1)) == 0);
- ASSERT (((UINTN) Buffer & (sizeof (UINT32) - 1)) == 0);
-
- ReturnBuffer = (UINT32 *) Buffer;
-
- while (Length) {
- MmioWrite32 (StartAddress, *(Buffer++));
-
- StartAddress += sizeof (UINT32);
- Length -= sizeof (UINT32);
- }
-
- return ReturnBuffer;
-}
-
-/**
- Copy data from system memory to MMIO region by using 64-bit access.
-
- Copy data from system memory specified by Buffer to MMIO region specified
- by starting address StartAddress by using 64-bit access. The total number
- of byte to be copied is specified by Length. Length is returned.
-
- If StartAddress is not aligned on a 64-bit boundary, then ASSERT().
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS -Buffer + 1), then ASSERT().
-
- If Length is not aligned on a 64-bit boundary, then ASSERT().
-
- If Buffer is not aligned on a 64-bit boundary, then ASSERT().
-
- @param StartAddress Starting address for the MMIO region to be copied to.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer containing the data to write.
-
- @return Size in bytes of the copy.
-
-**/
-UINT64 *
-EFIAPI
-MmioWriteBuffer64 (
- IN UINTN StartAddress,
- IN UINTN Length,
- IN CONST UINT64 *Buffer
- )
-{
- UINT64 *ReturnBuffer;
-
- ASSERT ((StartAddress & (sizeof (UINT64) - 1)) == 0);
-
- ASSERT ((Length - 1) <= (MAX_ADDRESS - StartAddress));
- ASSERT ((Length - 1) <= (MAX_ADDRESS - (UINTN) Buffer));
-
- ASSERT ((Length & (sizeof (UINT64) - 1)) == 0);
- ASSERT (((UINTN) Buffer & (sizeof (UINT64) - 1)) == 0);
-
- ReturnBuffer = (UINT64 *) Buffer;
-
- while (Length) {
- MmioWrite64 (StartAddress, *(Buffer++));
-
- StartAddress += sizeof (UINT64);
- Length -= sizeof (UINT64);
- }
-
- return ReturnBuffer;
-}
-
diff --git a/OldMdePkg/Library/PeiIoLibCpuIo/PeiIoLibCpuIo.msa b/OldMdePkg/Library/PeiIoLibCpuIo/PeiIoLibCpuIo.msa deleted file mode 100644 index a458f327c2..0000000000 --- a/OldMdePkg/Library/PeiIoLibCpuIo/PeiIoLibCpuIo.msa +++ /dev/null @@ -1,51 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<ModuleSurfaceArea xmlns="http://www.TianoCore.org/2006/Edk2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <MsaHeader>
- <ModuleName>PeiIoLibCpuIo</ModuleName>
- <ModuleType>PEIM</ModuleType>
- <GuidValue>b2585b69-fb63-4220-844a-8fbea8bf01af</GuidValue>
- <Version>1.0</Version>
- <Abstract>Component description file for Cpu Io Pei Io Library</Abstract>
- <Description>I/O Library implementation that uses the CPU I/O PPI for I/O - and MMIO operations.</Description>
- <Copyright>Copyright (c) 2006 - 2007, Intel Corporation.</Copyright>
- <License>All rights reserved. This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.</License>
- <Specification>FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052</Specification>
- </MsaHeader>
- <ModuleDefinitions>
- <SupportedArchitectures>IA32 X64 IPF EBC</SupportedArchitectures>
- <BinaryModule>false</BinaryModule>
- <OutputFileBasename>PeiIoLibCpuIo</OutputFileBasename>
- </ModuleDefinitions>
- <LibraryClassDefinitions>
- <LibraryClass Usage="ALWAYS_PRODUCED" SupModuleList="PEIM PEI_CORE">
- <Keyword>IoLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>DebugLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>BaseLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>PeiServicesTablePointerLib</Keyword>
- </LibraryClass>
- </LibraryClassDefinitions>
- <SourceFiles>
- <Filename>IoLibMmioBuffer.c</Filename>
- <Filename>IoLib.c</Filename>
- <Filename>IoHighLevel.c</Filename>
- </SourceFiles>
- <PackageDependencies>
- <Package PackageGuid="5e0e9358-46b6-4ae2-8218-4ab8b9bbdcec"/>
- </PackageDependencies>
- <Externs>
- <Specification>EFI_SPECIFICATION_VERSION 0x00020000</Specification>
- <Specification>EDK_RELEASE_VERSION 0x00020000</Specification>
- </Externs>
-</ModuleSurfaceArea>
\ No newline at end of file |