diff options
Diffstat (limited to 'Omap35xxPkg/Library')
| -rwxr-xr-x | Omap35xxPkg/Library/OmapDmaLib/OmapDmaLib.c | 348 | ||||
| -rwxr-xr-x | Omap35xxPkg/Library/OmapDmaLib/OmapDmaLib.inf | 48 |
2 files changed, 396 insertions, 0 deletions
diff --git a/Omap35xxPkg/Library/OmapDmaLib/OmapDmaLib.c b/Omap35xxPkg/Library/OmapDmaLib/OmapDmaLib.c new file mode 100755 index 0000000000..f979b9444a --- /dev/null +++ b/Omap35xxPkg/Library/OmapDmaLib/OmapDmaLib.c @@ -0,0 +1,348 @@ +/** @file
+ OMAP35xx DMA abstractions modeled on PCI IO protocol. EnableDma()/DisableDma()
+ are from OMAP35xx TRM.
+
+ Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Base.h>
+#include <Library/DebugLib.h>
+#include <Library/OmapDmaLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UncachedMemoryAllocationLib.h>
+#include <Library/IoLib.h>
+#include <Omap3530/Omap3530.h>
+
+#include <Protocol/Cpu.h>
+
+typedef struct {
+ EFI_PHYSICAL_ADDRESS HostAddress;
+ EFI_PHYSICAL_ADDRESS DeviceAddress;
+ UINTN NumberOfBytes;
+ DMA_MAP_OPERATION Operation;
+} MAP_INFO_INSTANCE;
+
+
+
+EFI_CPU_ARCH_PROTOCOL *gCpu; +
+/**
+ Configure OMAP DMA Channel
+
+ @param Channel DMA Channel to configure
+ @param Dma4 Pointer to structure used to initialize DMA registers for the Channel
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_INVALID_PARAMETER Channel is not valid
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested information.
+
+**/ +EFI_STATUS +EFIAPI +EnableDmaChannel ( + IN UINTN Channel, + IN OMAP_DMA4 *DMA4 + ) +{ + UINT32 RegVal; + + + if (Channel > DMA4_MAX_CHANNEL) { + return EFI_INVALID_PARAMETER; + } + + /* 1) Configure the transfer parameters in the logical DMA registers */
+ /*-------------------------------------------------------------------*/
+
+ /* a) Set the data type CSDP[1:0], the Read/Write Port access type
+ CSDP[8:7]/[15:14], the Source/dest endianism CSDP[21]/CSDP[19],
+ write mode CSDP[17:16], source/dest packed or nonpacked CSDP[6]/CSDP[13] */
+
+ // Read CSDP
+ RegVal = MmioRead32 (DMA4_CSDP (Channel));
+
+ // Build reg
+ RegVal = ((RegVal & ~ 0x3) | DMA4->DataType );
+ RegVal = ((RegVal & ~(0x3 << 7)) | (DMA4->ReadPortAccessType << 7));
+ RegVal = ((RegVal & ~(0x3 << 14)) | (DMA4->WritePortAccessType << 14));
+ RegVal = ((RegVal & ~(0x1 << 21)) | (DMA4->SourceEndiansim << 21));
+ RegVal = ((RegVal & ~(0x1 << 19)) | (DMA4->DestinationEndianism << 19));
+ RegVal = ((RegVal & ~(0x3 << 16)) | (DMA4->WriteMode << 16));
+ RegVal = ((RegVal & ~(0x1 << 6)) | (DMA4->SourcePacked << 6));
+ RegVal = ((RegVal & ~(0x1 << 13)) | (DMA4->DestinationPacked << 13));
+ // Write CSDP
+ MmioWrite32 (DMA4_CSDP (Channel), RegVal);
+
+ /* b) Set the number of element per frame CEN[23:0]*/
+ MmioWrite32 (DMA4_CEN (Channel), DMA4->NumberOfElementPerFrame);
+
+ /* c) Set the number of frame per block CFN[15:0]*/
+ MmioWrite32 (DMA4_CFN (Channel), DMA4->NumberOfFramePerTransferBlock);
+
+ /* d) Set the Source/dest start address index CSSA[31:0]/CDSA[31:0]*/
+ MmioWrite32 (DMA4_CSSA (Channel), DMA4->SourceStartAddress);
+ MmioWrite32 (DMA4_CDSA (Channel), DMA4->DestinationStartAddress);
+
+ /* e) Set the Read Port addressing mode CCR[13:12], the Write Port addressing mode CCR[15:14],
+ read/write priority CCR[6]/CCR[26]
+ I changed LCH CCR[20:19]=00 and CCR[4:0]=00000 to
+ LCH CCR[20:19]= DMA4->WriteRequestNumber and CCR[4:0]=DMA4->ReadRequestNumber
+ */
+
+ // Read CCR
+ RegVal = MmioRead32 (DMA4_CCR (Channel));
+
+ // Build reg
+ RegVal = ((RegVal & ~0x1f) | DMA4->ReadRequestNumber);
+ RegVal = ((RegVal & ~(BIT20 | BIT19)) | DMA4->WriteRequestNumber << 19);
+ RegVal = ((RegVal & ~(0x3 << 12)) | (DMA4->ReadPortAccessMode << 12));
+ RegVal = ((RegVal & ~(0x3 << 14)) | (DMA4->WritePortAccessMode << 14));
+ RegVal = ((RegVal & ~(0x1 << 6)) | (DMA4->ReadPriority << 6));
+ RegVal = ((RegVal & ~(0x1 << 26)) | (DMA4->WritePriority << 26));
+
+ // Write CCR
+ MmioWrite32 (DMA4_CCR (Channel), RegVal);
+
+ /* f)- Set the source element index CSEI[15:0]*/
+ MmioWrite32 (DMA4_CSEI (Channel), DMA4->SourceElementIndex);
+
+ /* - Set the source frame index CSFI[15:0]*/
+ MmioWrite32 (DMA4_CSFI (Channel), DMA4->SourceFrameIndex);
+
+
+ /* - Set the destination element index CDEI[15:0]*/
+ MmioWrite32 (DMA4_CDEI (Channel), DMA4->DestinationElementIndex);
+
+ /* - Set the destination frame index CDFI[31:0]*/
+ MmioWrite32 (DMA4_CDFI (Channel), DMA4->DestinationFrameIndex);
+
+ /* 2) Start the DMA transfer by Setting the enable bit CCR[7]=1 */
+ /*--------------------------------------------------------------*/
+ //write enable bit
+ MmioOr32 (DMA4_CCR(0), DMA4_CCR_ENABLE); //Launch transfer + + return EFI_SUCCESS; +} + +/**
+ Turn of DMA channel configured by EnableDma().
+
+ @param Channel DMA Channel to configure
+
+ @retval EFI_SUCCESS DMA hardware disabled
+ @retval EFI_INVALID_PARAMETER Channel is not valid
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested information.
+
+**/ +EFI_STATUS +EFIAPI +DisableDmaChannel ( + IN UINTN Channel + ) +{ + if (Channel > DMA4_MAX_CHANNEL) { + return EFI_INVALID_PARAMETER; + } + + MmioAnd32 (DMA4_CCR(0), ~(DMA4_CCR_ENABLE | DMA4_CCR_RD_ACTIVE | DMA4_CCR_WR_ACTIVE)); + return EFI_SUCCESS; +} + +/**
+ Provides the DMA controller-specific addresses needed to access system memory.
+
+ Operation is relative to the DMA bus master.
+
+ @param Operation Indicates if the bus master is going to read or write to system memory.
+ @param HostAddress The system memory address to map to the DMA controller.
+ @param NumberOfBytes On input the number of bytes to map. On output the number of bytes
+ that were mapped.
+ @param DeviceAddress The resulting map address for the bus master controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
+
+**/ +EFI_STATUS +EFIAPI +DmaMap ( + IN DMA_MAP_OPERATION Operation, + IN VOID *HostAddress,
+ IN OUT UINTN *NumberOfBytes,
+ OUT PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ ) +{ + MAP_INFO_INSTANCE *Map; + + if ( HostAddress == NULL || NumberOfBytes == NULL || + DeviceAddress == NULL || Mapping == NULL ) { + return EFI_INVALID_PARAMETER; + } + + + if (Operation >= MapOperationMaximum) { + return EFI_INVALID_PARAMETER; + } + + *DeviceAddress = ConvertToPhysicalAddress (HostAddress); + + // Remember range so we can flush on the other side + Map = AllocatePool (sizeof (MAP_INFO_INSTANCE)); + if (Map == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + *Mapping = Map; + + Map->HostAddress = (UINTN)HostAddress; + Map->DeviceAddress = *DeviceAddress; + Map->NumberOfBytes = *NumberOfBytes; + Map->Operation = Operation; + + // EfiCpuFlushTypeWriteBack, EfiCpuFlushTypeInvalidate + gCpu->FlushDataCache (gCpu, (EFI_PHYSICAL_ADDRESS)(UINTN)HostAddress, *NumberOfBytes, EfiCpuFlushTypeWriteBackInvalidate); + + return EFI_SUCCESS; +} + + +/**
+ Completes the DmaMapBusMasterRead(), DmaMapBusMasterWrite(), or DmaMapBusMasterCommonBuffer()
+ operation and releases any corresponding resources.
+
+ @param Mapping The mapping value returned from DmaMap*().
+
+ @retval EFI_SUCCESS The range was unmapped.
+ @retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
+
+**/ +EFI_STATUS +EFIAPI +DmaUnmap ( + IN VOID *Mapping
+ ) +{ + MAP_INFO_INSTANCE *Map; + + if (Mapping == NULL) { + ASSERT (FALSE); + return EFI_INVALID_PARAMETER; + } + + Map = (MAP_INFO_INSTANCE *)Mapping; + if (Map->Operation == MapOperationBusMasterWrite) { + // + // Make sure we read buffer from uncached memory and not the cache + // + gCpu->FlushDataCache (gCpu, Map->HostAddress, Map->NumberOfBytes, EfiCpuFlushTypeInvalidate); + } + + FreePool (Map); + + return EFI_SUCCESS; +} + +/**
+ Allocates pages that are suitable for an DmaMap() of type MapOperationBusMasterCommonBuffer.
+ mapping.
+
+ @param MemoryType The type of memory to allocate, EfiBootServicesData or
+ EfiRuntimeServicesData.
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the
+ allocated range.
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/EFI_STATUS +EFIAPI +DmaAllocateBuffer ( + IN EFI_MEMORY_TYPE MemoryType, + IN UINTN Pages,
+ OUT VOID **HostAddress
+ )
+{ + if (HostAddress == NULL) { + return EFI_INVALID_PARAMETER; + } + + // + // The only valid memory types are EfiBootServicesData and EfiRuntimeServicesData + // + // We used uncached memory to keep coherency + // + if (MemoryType == EfiBootServicesData) { + *HostAddress = UncachedAllocatePages (Pages); + } else if (MemoryType != EfiRuntimeServicesData) { + *HostAddress = UncachedAllocateRuntimePages (Pages); + } else { + return EFI_INVALID_PARAMETER; + } + + return EFI_SUCCESS; +} + + +/**
+ Frees memory that was allocated with DmaAllocateBuffer().
+
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+
+ @retval EFI_SUCCESS The requested memory pages were freed.
+ @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
+ was not allocated with DmaAllocateBuffer().
+
+**/
+EFI_STATUS +EFIAPI +DmaFreeBuffer ( + IN UINTN Pages,
+ IN VOID *HostAddress
+ )
+{ + if (HostAddress == NULL) { + return EFI_INVALID_PARAMETER; + } + + UncachedFreePages (HostAddress, Pages); + return EFI_SUCCESS; +} + + +EFI_STATUS +EFIAPI +OmapDmaLibConstructor ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + + // Get the Cpu protocol for later use + Status = gBS->LocateProtocol (&gEfiCpuArchProtocolGuid, NULL, (VOID **)&gCpu); + ASSERT_EFI_ERROR(Status); + + return EFI_SUCCESS; +} + diff --git a/Omap35xxPkg/Library/OmapDmaLib/OmapDmaLib.inf b/Omap35xxPkg/Library/OmapDmaLib/OmapDmaLib.inf new file mode 100755 index 0000000000..78f2d01dcb --- /dev/null +++ b/Omap35xxPkg/Library/OmapDmaLib/OmapDmaLib.inf @@ -0,0 +1,48 @@ +#/** @file
+#
+# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = OmapDmaLib
+ FILE_GUID = 09B17D99-BB07-49a8-B0D2-06D6AFCBE3AB
+ MODULE_TYPE = UEFI_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = OmapDmaLib
+ CONSTRUCTOR = OmapDmaLibConstructor
+
+[Sources.common]
+ OmapDmaLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ ArmPkg/ArmPkg.dec
+ Omap35xxPkg/Omap35xxPkg.dec
+
+[LibraryClasses]
+ DebugLib
+ UefiBootServicesTableLib
+ MemoryAllocationLib
+ UncachedMemoryAllocationLib
+ IoLib
+
+
+[Protocols]
+ gEfiCpuArchProtocolGuid
+
+[Guids]
+
+[Pcd]
+
+[Depex]
+ gEfiCpuArchProtocolGuid
\ No newline at end of file |