diff options
Diffstat (limited to 'Platform/Comcast/RDKQemu/RDKQemu.fdf')
| -rw-r--r-- | Platform/Comcast/RDKQemu/RDKQemu.fdf | 128 |
1 files changed, 128 insertions, 0 deletions
diff --git a/Platform/Comcast/RDKQemu/RDKQemu.fdf b/Platform/Comcast/RDKQemu/RDKQemu.fdf new file mode 100644 index 0000000000..2ff7bef08a --- /dev/null +++ b/Platform/Comcast/RDKQemu/RDKQemu.fdf @@ -0,0 +1,128 @@ +#
+# Copyright (c) 2011-2015, ARM Limited. All rights reserved.
+# Copyright (c) 2014 - 2018, Linaro Limited. All rights reserved.
+# Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+################################################################################
+#
+# FD Section
+# The [FD] Section is made up of the definition statements and a
+# description of what goes into the Flash Device Image. Each FD section
+# defines one flash "device" image. A flash device image may be one of
+# the following: Removable media bootable image (like a boot floppy
+# image,) an Option ROM image (that would be "flashed" into an add-in
+# card,) a System "Flash" image (that would be burned into a system's
+# flash) or an Update ("Capsule") image that will be used to update and
+# existing system flash.
+#
+################################################################################
+
+[FD.RDK_EFI]
+BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
+Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
+ErasePolarity = 1
+
+# This one is tricky, it must be: BlockSize * NumBlocks = Size
+BlockSize = 0x00001000
+NumBlocks = 0x200
+
+################################################################################
+#
+# Following are lists of FD Region layout which correspond to the locations of different
+# images within the flash device.
+#
+# Regions must be defined in ascending order and may not overlap.
+#
+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
+# the pipe "|" character, followed by the size of the region, also in hex with the leading
+# "0x" characters. Like:
+# Offset|Size
+# PcdOffsetCName|PcdSizeCName
+# RegionType <FV, DATA, or FILE>
+#
+################################################################################
+
+#
+# UEFI has trouble dealing with FVs that reside at physical address 0x0.
+# So instead, put a hardcoded 'jump to 0x1000' at offset 0x0, and put the
+# real FV at offset 0x1000
+#
+0x00000000|0x00001000
+DATA = {
+!if $(ARCH) == AARCH64
+ 0x00, 0x04, 0x00, 0x14 # 'b 0x1000' in AArch64 ASM
+!else
+ 0xfe, 0x03, 0x00, 0xea # 'b 0x1000' in AArch32 ASM
+!endif
+}
+
+0x00001000|0x001ff000
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
+FV = FVMAIN_COMPACT
+
+!include ArmVirtPkg/VarStore.fdf.inc
+
+################################################################################
+#
+# FV Section
+#
+# [FV] section is used to define what components or modules are placed within a flash
+# device file. This section also defines order the components and modules are positioned
+# within the image. The [FV] section consists of define statements, set statements and
+# module statements.
+#
+################################################################################
+
+!include ArmVirtPkg/ArmVirtQemuFvMain.fdf.inc
+
+[FV.FVMAIN_COMPACT]
+#FvNameGuid = 64074afe-340a-4be6-94ba-91b5b4d0d412
+FvAlignment = 16
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
+ INF MdeModulePkg/Core/Pei/PeiMain.inf
+ INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
+ INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
+ INF ArmPkg/Drivers/CpuPei/CpuPei.inf
+ INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
+ INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
+ INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
+
+ #
+ # FDT installation
+ #
+ # The UEFI driver is at the end of the list of the driver to be dispatched
+ # after the device drivers (eg: Ethernet) to ensure we have support for them.
+ #INF Platform/ARM/Drivers/FdtPlatformDxe/FdtPlatformDxe.inf
+
+ FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
+ SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
+ SECTION FV_IMAGE = FVMAIN
+ }
+ }
+
+!include ArmVirtPkg/ArmVirtRules.fdf.inc
|