diff options
Diffstat (limited to 'Tools/CCode/Source/Include/Protocol')
| -rw-r--r-- | Tools/CCode/Source/Include/Protocol/DevicePath.h | 94 | ||||
| -rw-r--r-- | Tools/CCode/Source/Include/Protocol/GuidedSectionExtraction.h | 102 | ||||
| -rw-r--r-- | Tools/CCode/Source/Include/Protocol/Hii.h | 1024 | ||||
| -rw-r--r-- | Tools/CCode/Source/Include/Protocol/UgaDraw.h | 168 |
4 files changed, 0 insertions, 1388 deletions
diff --git a/Tools/CCode/Source/Include/Protocol/DevicePath.h b/Tools/CCode/Source/Include/Protocol/DevicePath.h deleted file mode 100644 index d01999904f..0000000000 --- a/Tools/CCode/Source/Include/Protocol/DevicePath.h +++ /dev/null @@ -1,94 +0,0 @@ -/** @file
- The device path protocol as defined in EFI 1.0.
-
- The device path represents a programatic path to a device. It's the view
- from a software point of view. It also must persist from boot to boot, so
- it can not contain things like PCI bus numbers that change from boot to boot.
-
- Copyright (c) 2006, Intel Corporation
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
- Module Name: DevicePath.h
-
-**/
-
-#ifndef __EFI_DEVICE_PATH_PROTOCOL_H__
-#define __EFI_DEVICE_PATH_PROTOCOL_H__
-
-//
-// Device Path protocol
-//
-#define EFI_DEVICE_PATH_PROTOCOL_GUID \
- { \
- 0x9576e91, 0x6d3f, 0x11d2, {0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b } \
- }
-
-#pragma pack(1)
-
-typedef struct {
- UINT8 Type;
- UINT8 SubType;
- UINT8 Length[2];
-} EFI_DEVICE_PATH_PROTOCOL;
-
-#pragma pack()
-
-#define EFI_DP_TYPE_MASK 0x7F
-#define EFI_DP_TYPE_UNPACKED 0x80
-#define END_DEVICE_PATH_TYPE 0x7f
-
-#define EFI_END_ENTIRE_DEVICE_PATH 0xff
-#define EFI_END_ENTIRE_DEVICE_PATH_SUBTYPE 0xff
-#define EFI_END_INSTANCE_DEVICE_PATH 0x01
-#define END_ENTIRE_DEVICE_PATH_SUBTYPE EFI_END_ENTIRE_DEVICE_PATH_SUBTYPE
-#define END_INSTANCE_DEVICE_PATH_SUBTYPE EFI_END_INSTANCE_DEVICE_PATH
-
-#define EFI_END_DEVICE_PATH_LENGTH (sizeof (EFI_DEVICE_PATH_PROTOCOL))
-#define END_DEVICE_PATH_LENGTH EFI_END_DEVICE_PATH_LENGTH
-
-#define DP_IS_END_TYPE(a)
-#define DP_IS_END_SUBTYPE(a) (((a)->SubType == END_ENTIRE_DEVICE_PATH_SUBTYPE)
-#define DevicePathSubType(a) ((a)->SubType)
-#define IsDevicePathUnpacked(a) ((a)->Type & EFI_DP_TYPE_UNPACKED)
-
-#define EfiDevicePathNodeLength(a) (((a)->Length[0]) | ((a)->Length[1] << 8))
-#define DevicePathNodeLength(a) (EfiDevicePathNodeLength(a))
-#define EfiNextDevicePathNode(a) ((EFI_DEVICE_PATH_PROTOCOL *) (((UINT8 *) (a)) + EfiDevicePathNodeLength (a)))
-#define NextDevicePathNode(a) (EfiNextDevicePathNode(a))
-
-#define EfiDevicePathType(a) (((a)->Type) & EFI_DP_TYPE_MASK)
-#define DevicePathType(a) (EfiDevicePathType(a))
-#define EfiIsDevicePathEndType(a) (EfiDevicePathType (a) == END_DEVICE_PATH_TYPE)
-#define IsDevicePathEndType(a) (EfiIsDevicePathEndType(a))
-
-
-#define EfiIsDevicePathEndSubType(a) ((a)->SubType == EFI_END_ENTIRE_DEVICE_PATH_SUBTYPE)
-#define IsDevicePathEndSubType(a) (EfiIsDevicePathEndSubType(a))
-#define EfiIsDevicePathEndInstanceSubType(a) ((a)->SubType == EFI_END_INSTANCE_DEVICE_PATH)
-
-#define EfiIsDevicePathEnd(a) (EfiIsDevicePathEndType (a) && EfiIsDevicePathEndSubType (a))
-#define IsDevicePathEnd(a) (EfiIsDevicePathEnd(a))
-#define EfiIsDevicePathEndInstance(a) (EfiIsDevicePathEndType (a) && EfiIsDevicePathEndInstanceSubType (a))
-
-
-#define SetDevicePathNodeLength(a,l) { \
- (a)->Length[0] = (UINT8) (l); \
- (a)->Length[1] = (UINT8) ((l) >> 8); \
- }
-
-#define SetDevicePathEndNode(a) { \
- (a)->Type = END_DEVICE_PATH_TYPE; \
- (a)->SubType = END_ENTIRE_DEVICE_PATH_SUBTYPE; \
- (a)->Length[0] = sizeof(EFI_DEVICE_PATH_PROTOCOL); \
- (a)->Length[1] = 0; \
- }
-
-extern EFI_GUID gEfiDevicePathProtocolGuid;
-
-#endif
diff --git a/Tools/CCode/Source/Include/Protocol/GuidedSectionExtraction.h b/Tools/CCode/Source/Include/Protocol/GuidedSectionExtraction.h deleted file mode 100644 index d98c56a7bc..0000000000 --- a/Tools/CCode/Source/Include/Protocol/GuidedSectionExtraction.h +++ /dev/null @@ -1,102 +0,0 @@ -/** @file
- This file declares GUIDed section extraction protocol.
-
- This interface provides a means of decoding a GUID defined encapsulation
- section. There may be multiple different GUIDs associated with the GUIDed
- section extraction protocol. That is, all instances of the GUIDed section
- extraction protocol must have the same interface structure.
-
- Copyright (c) 2006, Intel Corporation
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
- Module Name: GuidedSectionExtraction.h
-
- @par Revision Reference:
- This protocol is defined in Firmware Volume Specification.
- Version 0.9
-
-**/
-
-#ifndef __GUIDED_SECTION_EXTRACTION_PROTOCOL_H__
-#define __GUIDED_SECTION_EXTRACTION_PROTOCOL_H__
-
-
-//
-// Protocol GUID definition. Each GUIDed section extraction protocol has the
-// same interface but with different GUID. All the GUIDs is defined here.
-// May add multiple GUIDs here.
-//
-#define EFI_CRC32_GUIDED_SECTION_EXTRACTION_PROTOCOL_GUID \
- { \
- 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } \
- }
-
-//
-// Forward reference for pure ANSI compatability
-//
-typedef struct _EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL;
-
-//
-// Protocol member functions
-//
-/**
- Processes the input section and returns the data contained therein along
- with the authentication status.
-
- @param This Indicates the EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL instance.
- @param InputSection Buffer containing the input GUIDed section to be processed.
- @param OutputBuffer *OutputBuffer is allocated from boot services pool memory
- and contains the new section stream.
- @param OutputSize A pointer to a caller-allocated UINTN in which the size
- of *OutputBuffer allocation is stored.
- @param AuthenticationStatus A pointer to a caller-allocated UINT32 that
- indicates the authentication status of the output buffer.
-
- @retval EFI_SUCCESS The InputSection was successfully processed and the
- section contents were returned.
- @retval EFI_OUT_OF_RESOURCES The system has insufficient resources to
- process the request.
- @retval EFI_INVALID_PARAMETER The GUID in InputSection does not match
- this instance of the GUIDed Section Extraction Protocol.
-
-**/
-
-typedef
-EFI_STATUS
-(EFIAPI *EFI_EXTRACT_GUIDED_SECTION) (
- IN EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL *This,
- IN VOID *InputSection,
- OUT VOID **OutputBuffer,
- OUT UINTN *OutputSize,
- OUT UINT32 *AuthenticationStatus
- );
-
-//
-// Protocol definition
-//
-/**
- @par Protocol Description:
- If a GUID-defined section is encountered when doing section extraction,
- the section extraction driver calls the appropriate instance of the GUIDed
- Section Extraction Protocol to extract the section stream contained therein.
-
- @param ExtractSection
- Takes the GUIDed section as input and produces the section stream data.
-
-**/
-struct _EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL {
- EFI_EXTRACT_GUIDED_SECTION ExtractSection;
-};
-
-//
-// may add other GUID here
-//
-extern EFI_GUID gEfiCrc32GuidedSectionExtractionProtocolGuid;
-
-#endif
diff --git a/Tools/CCode/Source/Include/Protocol/Hii.h b/Tools/CCode/Source/Include/Protocol/Hii.h deleted file mode 100644 index d1c3c252d6..0000000000 --- a/Tools/CCode/Source/Include/Protocol/Hii.h +++ /dev/null @@ -1,1024 +0,0 @@ -/** @file
- This file defines the Human Interface Infrastructure protocol which will
- be used by resources which want to publish IFR/Font/String data and have it
- collected by the Configuration engine.
-
- Copyright (c) 2006, Intel Corporation
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
- Module Name: Hii.h
-
- @par Revision Reference:
- This protocol is defined in HII spec 0.92.
-
-**/
-
-#ifndef __HII_H__
-#define __HII_H__
-
-
-#define EFI_HII_PROTOCOL_GUID \
- { \
- 0xea816d2c, 0xcee5, 0x4f02, {0x99, 0xb5, 0xd3, 0x90, 0x5c, 0xbb, 0xd0, 0x77 } \
- }
-
-// BugBug:
-//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-// If UGA goes away we need to put this some place. I'm not sure where?
-//
-//typedef struct {
-// UINT8 Blue;
-// UINT8 Green;
-// UINT8 Red;
-// UINT8 Reserved;
-//} EFI_UGA_PIXEL;
-
-//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-//
-
-typedef struct _EFI_HII_PROTOCOL EFI_HII_PROTOCOL;
-
-//
-// Global definition
-//
-#define NARROW_CHAR 0xFFF0
-#define WIDE_CHAR 0xFFF1
-#define NON_BREAKING_CHAR 0xFFF2
-#define GLYPH_WIDTH 8
-#define GLYPH_HEIGHT 19
-
-#define EFI_HII_FONT 1
-#define EFI_HII_STRING 2
-#define EFI_HII_IFR 3
-#define EFI_HII_KEYBOARD 4
-#define EFI_HII_HANDLES 5
-#define EFI_HII_VARIABLE 6
-#define EFI_HII_DEVICE_PATH 7
-
-
-// References to string tokens must use this macro to enable scanning for
-// token usages.
-//
-#define STRING_TOKEN(t) t
-
-//
-// The following types are currently defined:
-//
-typedef UINT16 EFI_FORM_ID;
-typedef UINT16 EFI_FORM_LABEL;
-
-#pragma pack(1)
-
-typedef struct {
- UINT32 Length;
- UINT16 Type;
-} EFI_HII_PACK_HEADER;
-
-//
-// A form list consists of a large variety of structure
-// possibilities so to represent the binary blob of data
-// associated with a package of forms, we will assume a
-// pointer to a self-describing data buffer.
-//
-typedef struct {
- EFI_HII_PACK_HEADER Header;
-} EFI_HII_IFR_PACK;
-
-typedef struct {
- EFI_HII_PACK_HEADER Header; // Must be filled in
- EFI_HANDLE ImageHandle; // Must be filled in
- EFI_HANDLE DeviceHandle; // Optional
- EFI_HANDLE ControllerHandle; // Optional
- EFI_HANDLE CallbackHandle; // Optional
- EFI_HANDLE COBExportHandle; // Optional
-} EFI_HII_HANDLE_PACK;
-
-//
-// ********************************************************
-// EFI_VARIABLE_CONTENTS
-// ********************************************************
-//
-typedef struct {
- EFI_HII_PACK_HEADER Header;
- EFI_GUID VariableGuid;
- UINT32 VariableNameLength;
- UINT16 VariableId;
- //
- // CHAR16 VariableName[]; //Null-terminated
- //
-} EFI_HII_VARIABLE_PACK;
-
-//
-// ********************************************************
-// EFI_DEVICE_PATH_PACK
-// ********************************************************
-//
-typedef struct {
- EFI_HII_PACK_HEADER Header;
- //
- // EFI_DEVICE_PATH DevicePath[];
- //
-} EFI_HII_DEVICE_PATH_PACK;
-
-//
-// ********************************************************
-// EFI_HII_DATA_TABLE
-// ********************************************************
-//
-typedef struct {
- EFI_HII_HANDLE HiiHandle;
- EFI_GUID PackageGuid;
- UINT32 DataTableSize;
- UINT32 IfrDataOffset;
- UINT32 StringDataOffset;
- UINT32 VariableDataOffset;
- UINT32 DevicePathOffset;
- UINT32 NumberOfVariableData;
- UINT32 NumberOfLanguages;
- //
- // EFI_HII_DEVICE_PATH_PACK DevicePath[];
- // EFI_HII_VARIABLE_PACK VariableData[];
- // EFI_HII_IFR_PACK IfrData;
- // EFI_HII_STRING_PACK StringData[];
- //
-} EFI_HII_DATA_TABLE;
-
-//
-// ********************************************************
-// EFI_HII_EXPORT_TABLE
-// ********************************************************
-//
-typedef struct {
- UINT32 NumberOfHiiDataTables;
- EFI_GUID Revision;
- //
- // EFI_HII_DATA_TABLE HiiDataTable[];
- //
-} EFI_HII_EXPORT_TABLE;
-
-typedef struct {
- BOOLEAN FormSetUpdate; // If TRUE, next variable is significant
- EFI_PHYSICAL_ADDRESS FormCallbackHandle; // If not 0, will update Formset with this info
- BOOLEAN FormUpdate; // If TRUE, next variable is significant
- UINT16 FormValue; // specify which form is to be updated if FormUpdate value is TRUE.
- STRING_REF FormTitle; // If not 0, will update Form with this info
- UINT16 DataCount; // The number of Data entries in this structure
- UINT8 *Data; // An array of 1+ op-codes, specified by DataCount
-} EFI_HII_UPDATE_DATA;
-
-//
-// String attributes
-//
-#define LANG_RIGHT_TO_LEFT 0x00000001
-
-//
-// A string package is used to localize strings to a particular
-// language. The package is associated with a particular driver
-// or set of drivers. Tools are used to associate tokens with
-// string references in forms and in programs. These tokens are
-// language agnostic. When paired with a language pack (directly
-// or indirectly), the string token resolves into an actual
-// UNICODE string. The NumStringPointers determines how many
-// StringPointers (offset values) there are as well as the total
-// number of Strings that are defined.
-//
-typedef struct {
- EFI_HII_PACK_HEADER Header;
- RELOFST LanguageNameString;
- RELOFST PrintableLanguageName;
- UINT32 NumStringPointers;
- UINT32 Attributes;
- //
- // RELOFST StringPointers[];
- // EFI_STRING Strings[];
- //
-} EFI_HII_STRING_PACK;
-
-//
-// Glyph Attributes
-//
-#define EFI_GLYPH_NON_SPACING 1
-#define EFI_GLYPH_WIDE 2
-
-typedef struct {
- CHAR16 UnicodeWeight;
- UINT8 Attributes;
- UINT8 GlyphCol1[GLYPH_HEIGHT];
-} EFI_NARROW_GLYPH;
-
-typedef struct {
- CHAR16 UnicodeWeight;
- UINT8 Attributes;
- UINT8 GlyphCol1[GLYPH_HEIGHT];
- UINT8 GlyphCol2[GLYPH_HEIGHT];
- UINT8 Pad[3];
-} EFI_WIDE_GLYPH;
-
-//
-// A font list consists of a font header followed by a series
-// of glyph structures. Note that fonts are not language specific.
-//
-typedef struct {
- EFI_HII_PACK_HEADER Header;
- UINT16 NumberOfNarrowGlyphs;
- UINT16 NumberOfWideGlyphs;
-} EFI_HII_FONT_PACK;
-
-//
-// The IfrData in the EFI_HII_IFR_PACK structure definition
-// is variable length, and not really part of the header. To
-// simplify from code the size of the header, define an
-// identical structure that does not include the IfrData field.
-// Then use sizeof() this new structure to determine the
-// actual size of the header.
-//
-typedef struct {
- EFI_HII_PACK_HEADER Header;
-} EFI_HII_IFR_PACK_HEADER;
-
-//
-// pedef EFI_HII_PACK_HEADER EFI_HII_IFR_PACK_HEADER;
-//
-typedef enum {
- EfiKeyLCtrl,
- EfiKeyA0,
- EfiKeyLAlt,
- EfiKeySpaceBar,
- EfiKeyA2,
- EfiKeyA3,
- EfiKeyA4,
- EfiKeyRCtrl,
- EfiKeyLeftArrow,
- EfiKeyDownArrow,
- EfiKeyRightArrow,
- EfiKeyZero,
- EfiKeyPeriod,
- EfiKeyEnter,
- EfiKeyLShift,
- EfiKeyB0,
- EfiKeyB1,
- EfiKeyB2,
- EfiKeyB3,
- EfiKeyB4,
- EfiKeyB5,
- EfiKeyB6,
- EfiKeyB7,
- EfiKeyB8,
- EfiKeyB9,
- EfiKeyB10,
- EfiKeyRshift,
- EfiKeyUpArrow,
- EfiKeyOne,
- EfiKeyTwo,
- EfiKeyThree,
- EfiKeyCapsLock,
- EfiKeyC1,
- EfiKeyC2,
- EfiKeyC3,
- EfiKeyC4,
- EfiKeyC5,
- EfiKeyC6,
- EfiKeyC7,
- EfiKeyC8,
- EfiKeyC9,
- EfiKeyC10,
- EfiKeyC11,
- EfiKeyC12,
- EfiKeyFour,
- EfiKeyFive,
- EfiKeySix,
- EfiKeyPlus,
- EfiKeyTab,
- EfiKeyD1,
- EfiKeyD2,
- EfiKeyD3,
- EfiKeyD4,
- EfiKeyD5,
- EfiKeyD6,
- EfiKeyD7,
- EfiKeyD8,
- EfiKeyD9,
- EfiKeyD10,
- EfiKeyD11,
- EfiKeyD12,
- EfiKeyD13,
- EfiKeyDel,
- EfiKeyEnd,
- EfiKeyPgDn,
- EfiKeySeven,
- EfiKeyEight,
- EfiKeyNine,
- EfiKeyE0,
- EfiKeyE1,
- EfiKeyE2,
- EfiKeyE3,
- EfiKeyE4,
- EfiKeyE5,
- EfiKeyE6,
- EfiKeyE7,
- EfiKeyE8,
- EfiKeyE9,
- EfiKeyE10,
- EfiKeyE11,
- EfiKeyE12,
- EfiKeyBackSpace,
- EfiKeyIns,
- EfiKeyHome,
- EfiKeyPgUp,
- EfiKeyNLck,
- EfiKeySlash,
- EfiKeyAsterisk,
- EfiKeyMinus,
- EfiKeyEsc,
- EfiKeyF1,
- EfiKeyF2,
- EfiKeyF3,
- EfiKeyF4,
- EfiKeyF5,
- EfiKeyF6,
- EfiKeyF7,
- EfiKeyF8,
- EfiKeyF9,
- EfiKeyF10,
- EfiKeyF11,
- EfiKeyF12,
- EfiKeyPrint,
- EfiKeySLck,
- EfiKeyPause
-} EFI_KEY;
-
-typedef struct {
- EFI_KEY Key;
- CHAR16 Unicode;
- CHAR16 ShiftedUnicode;
- CHAR16 AltGrUnicode;
- CHAR16 ShiftedAltGrUnicode;
- UINT16 Modifier;
-} EFI_KEY_DESCRIPTOR;
-
-//
-// This structure allows a sparse set of keys to be redefined
-// or a complete redefinition of the keyboard layout. Most
-// keyboards have a lot of commonality in their layouts, therefore
-// only defining those keys that need to change from the default
-// minimizes the passed in information.
-//
-// Additionally, when an update occurs, the active keyboard layout
-// will be switched to the newly updated keyboard layout. This
-// allows for situations that when a keyboard layout driver is
-// loaded as part of system initialization, the system will default
-// the keyboard behavior to the new layout.
-//
-// Each call to update the keyboard mapping should contain the
-// complete set of key descriptors to be updated, since every
-// call to the HII which contains an EFI_HII_KEYBOARD_PACK will
-// wipe the previous set of overrides. A call to
-//
-typedef struct {
- EFI_HII_PACK_HEADER Header;
- EFI_KEY_DESCRIPTOR *Descriptor;
- UINT8 DescriptorCount;
-} EFI_HII_KEYBOARD_PACK;
-
-//
-// The EFI_HII_PACKAGES can contain different types of packages just
-// after the structure as inline data.
-//
-typedef struct {
- UINTN NumberOfPackages;
- EFI_GUID *GuidId;
- //
- // EFI_HII_HANDLE_PACK *HandlePack; // Only one pack.
- // EFI_HII_IFR_PACK *IfrPack; // Only one pack.
- // EFI_HII_FONT_PACK *FontPack[]; // Multiple packs ok
- // EFI_HII_STRING_PACK *StringPack[]; // Multiple packs ok
- // EFI_HII_KEYBOARD_PACK *KeyboardPack[]; // Multiple packs ok
- //
-} EFI_HII_PACKAGES;
-
-typedef struct _EFI_HII_VARIABLE_PACK_LIST {
- struct _EFI_HII_VARIABLE_PACK_LIST *NextVariablePack;
- EFI_HII_VARIABLE_PACK *VariablePack;
-} EFI_HII_VARIABLE_PACK_LIST;
-
-#pragma pack()
-
-/**
- Registers the various packs that are passed in via the Packages parameter.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param Packages A pointer to an EFI_HII_PACKAGES package instance.
-
- @param Handle A pointer to the EFI_HII_HANDLE instance.
-
- @retval EFI_SUCCESS Data was extracted from Packages, the database
- was updated with the data, and Handle returned successfully.
-
- @retval EFI_INVALID_PARAMETER The content of Packages was invalid.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_NEW_PACK) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_PACKAGES *Packages,
- OUT EFI_HII_HANDLE *Handle
- );
-
-/**
- Removes a package from the HII database.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param Handle The handle that was registered to the data that is requested
- for removal.
-
- @retval EFI_SUCCESS The data associated with the Handle was removed
- from the HII database.
-
- @retval EFI_INVALID_PARAMETER The Handle was not valid.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_REMOVE_PACK) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle
- );
-
-/**
- Determines the handles that are currently active in the database.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param HandleBufferLength On input, a pointer to the length of the handle
- buffer. On output, the length of the handle buffer that is required
- for the handles found.
-
- @param Handle An array of EFI_HII_HANDLE instances returned.
-
- @retval EFI_SUCCESS Handle was updated successfully.
-
- @retval EFI_BUFFER_TOO_SMALL The HandleBufferLength parameter indicates
- that Handle is too small to support the number of handles.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_FIND_HANDLES) (
- IN EFI_HII_PROTOCOL *This,
- IN OUT UINT16 *HandleBufferLength,
- OUT EFI_HII_HANDLE *Handle
- );
-
-/**
- Exports the contents of the database into a buffer.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param Handle An EFI_HII_HANDLE that corresponds to the desired
- handle to export. If the value is 0, the entire database will be exported.
- In either case, the data will be exported in a format described by the
- structure definition of EFI_HII_EXPORT_TABLE.
-
- @param BufferSize
- On input, a pointer to the length of the buffer. On output, the length
- of the buffer that is required for the export data.
-
- @param Buffer A pointer to a buffer that will contain the results of the export function.
-
- @retval EFI_SUCCESS The buffer was successfully filled with BufferSize amount of data.
-
- @retval EFI_BUFFER_TOO_SMALL The value in BufferSize was too small to contain the export data.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_EXPORT) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- IN OUT UINTN *BufferSize,
- OUT VOID *Buffer
- );
-
-/**
- Remove any new strings that were added after the initial string export
- for this handle.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param Handle The handle on which the string resides.
-
- @retval EFI_SUCCESS Remove strings from the handle successfully.
-
- @retval EFI_INVALID_PARAMETER The Handle was unknown.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_RESET_STRINGS) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle
- );
-
-/**
- Tests if all of the characters in a string have corresponding font characters.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param StringToTest A pointer to a Unicode string.
-
- @param FirstMissing A pointer to an index into the string. On input,
- the index of the first character in the StringToTest to examine. On exit,
- the index of the first character encountered for which a glyph is unavailable.
- If all glyphs in the string are available, the index is the index of the
- terminator of the string.
-
- @param GlyphBufferSize A pointer to a value. On output, if the function
- returns EFI_SUCCESS, it contains the amount of memory that is required to
- store the string's glyph equivalent.
-
- @retval EFI_SUCCESS All glyphs are available. Note that an empty string
- always returns this value.
-
- @retval EFI_NOT_FOUND A glyph was not found for a character.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_TEST_STRING) (
- IN EFI_HII_PROTOCOL *This,
- IN CHAR16 *StringToTest,
- IN OUT UINT32 *FirstMissing,
- OUT UINT32 *GlyphBufferSize
- );
-
-/**
- Translates a Unicode character into the corresponding font glyph.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param Source A pointer to a Unicode string.
-
- @param Index On input, the offset into the string from which to fetch
- the character.On successful completion, the index is updated to the first
- character past the character(s) making up the just extracted glyph.
-
- @param GlyphBuffer Pointer to an array where the glyphs corresponding
- to the characters in the source may be stored. GlyphBuffer is assumed
- to be wide enough to accept a wide glyph character.
-
- @param BitWidth If EFI_SUCCESS was returned, the UINT16 pointed to by
- this value is filled with the length of the glyph in pixels. It is unchanged
- if the call was unsuccessful.
-
- @param InternalStatus The cell pointed to by this parameter must be
- initialized to zero prior to invoking the call the first time for any string.
-
- @retval EFI_SUCCESS It worked.
-
- @retval EFI_NOT_FOUND A glyph for a character was not found.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_GLYPH) (
- IN EFI_HII_PROTOCOL *This,
- IN CHAR16 *Source,
- IN OUT UINT16 *Index,
- OUT UINT8 **GlyphBuffer,
- OUT UINT16 *BitWidth,
- IN OUT UINT32 *InternalStatus
- );
-
-/**
- Translates a glyph into the format required for input to the Universal
- Graphics Adapter (UGA) Block Transfer (BLT) routines.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param GlyphBuffer A pointer to the buffer that contains glyph data.
-
- @param Foreground The foreground setting requested to be used for the
- generated BltBuffer data.
-
- @param Background The background setting requested to be used for the
- generated BltBuffer data.
-
- @param Count The entry in the BltBuffer upon which to act.
-
- @param Width The width in bits of the glyph being converted.
-
- @param Height The height in bits of the glyph being converted
-
- @param BltBuffer A pointer to the buffer that contains the data that is
- ready to be used by the UGA BLT routines.
-
- @retval EFI_SUCCESS It worked.
-
- @retval EFI_NOT_FOUND A glyph for a character was not found.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GLYPH_TO_BLT) (
- IN EFI_HII_PROTOCOL *This,
- IN UINT8 *GlyphBuffer,
- IN EFI_UGA_PIXEL Foreground,
- IN EFI_UGA_PIXEL Background,
- IN UINTN Count,
- IN UINTN Width,
- IN UINTN Height,
- IN OUT EFI_UGA_PIXEL *BltBuffer
- );
-
-/**
- Allows a new string to be added to an already existing string package.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param Pointer to a NULL-terminated string containing a single ISO 639-2
- language identifier, indicating the language in which the string is translated.
-
- @param Handle The handle of the language pack to which the string is to be added.
-
- @param Reference The identifier of the string to be added. If the reference
- value is zero, then the string will be assigned a new identifier on that
- handle for the language specified. Otherwise, the string will be updated
- with the NewString Value.
-
- @param NewString The string to be added.
-
- @retval EFI_SUCCESS The string was effectively registered.
-
- @retval EFI_INVALID_PARAMETER The Handle was unknown.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_NEW_STRING) (
- IN EFI_HII_PROTOCOL *This,
- IN CHAR16 *Language,
- IN EFI_HII_HANDLE Handle,
- IN OUT STRING_REF *Reference,
- IN CHAR16 *NewString
- );
-
-/**
- Allows a program to determine the primary languages that are supported
- on a given handle.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param Handle The handle on which the strings reside.
-
- @param LanguageString A string allocated by GetPrimaryLanguages() that
- contains a list of all primary languages registered on the handle.
-
- @retval EFI_SUCCESS LanguageString was correctly returned.
-
- @retval EFI_INVALID_PARAMETER The Handle was unknown.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_PRI_LANGUAGES) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- OUT EFI_STRING *LanguageString
- );
-
-/**
- Allows a program to determine which secondary languages are supported
- on a given handle for a given primary language.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param Handle The handle on which the strings reside.
-
- @param PrimaryLanguage Pointer to a NULL-terminated string containing a single
- ISO 639-2 language identifier, indicating the primary language.
-
- @param LanguageString A string allocated by GetSecondaryLanguages()
- containing a list of all secondary languages registered on the handle.
-
- @retval EFI_SUCCESS LanguageString was correctly returned.
-
- @retval EFI_INVALID_PARAMETER The Handle was unknown.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_SEC_LANGUAGES) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- IN CHAR16 *PrimaryLanguage,
- OUT EFI_STRING *LanguageString
- );
-
-/**
- Extracts a string from a package already registered with the EFI HII database.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param Handle The handle on which the string resides.
-
- @param Token The string token assigned to the string.
-
- @param Raw If TRUE, the string is returned unedited in the internal
- storage format described above. If false, the string returned is edited
- by replacing <cr> with <space> and by removing special characters such
- as the <wide> prefix.
-
- @param LanguageString Pointer to a NULL-terminated string containing a
- single ISO 639-2 language identifier, indicating the language to print.
- If the LanguageString is empty (starts with a NULL), the default system
- language will be used to determine the language.
-
- @param BufferLength Length of the StringBuffer.
-
- @param StringBuffer The buffer designed to receive the characters in the string.
-
- @retval EFI_SUCCESS StringBuffer is filled with a NULL-terminated string.
-
- @retval EFI_INVALID_PARAMETER The handle or string token is unknown.
-
- @retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough to
- allow the entire string to be stored.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_STRING) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- IN STRING_REF Token,
- IN BOOLEAN Raw,
- IN CHAR16 *LanguageString,
- IN OUT UINTN *BufferLength,
- OUT EFI_STRING StringBuffer
- );
-
-/**
- Allows a program to extract a part of a string of not more than a given width.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param Handle The handle on which the string resides.
-
- @param Token The string token assigned to the string.
-
- @param Index On input, the offset into the string where the line is to start.
- On output, the index is updated to point to beyond the last character returned
- in the call.
-
- @param LineWidth The maximum width of the line in units of narrow glyphs.
-
- @param LanguageString Pointer to a NULL-terminated string containing a
- single ISO 639-2 language identifier, indicating the language to print.
-
- @param BufferLength Pointer to the length of the StringBuffer.
-
- @param StringBuffer The buffer designed to receive the characters in the string.
-
- @retval EFI_SUCCESS StringBuffer filled with characters that will fit on the line.
-
- @retval EFI_NOT_FOUND The font glyph for at least one of the characters in
- the string is not in the font database.
-
- @retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough
- to allow the entire string to be stored.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_LINE) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- IN STRING_REF Token,
- IN OUT UINT16 *Index,
- IN UINT16 LineWidth,
- IN CHAR16 *LanguageString,
- IN OUT UINT16 *BufferLength,
- OUT EFI_STRING StringBuffer
- );
-
-/**
- Allows a program to extract a form or form package that has previously
- been registered with the HII database.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param Handle Handle on which the form resides.
-
- @param FormId The ID of the form to return. If the ID is zero,
- the entire form package is returned.
-
- @param BufferLength On input, the length of the Buffer. On output,
- the length of the returned buffer,
-
- @param Buffer The buffer designed to receive the form(s).
-
- @retval EFI_SUCCESS Buffer filled with the requested forms. BufferLength
- was updated.
-
- @retval EFI_INVALID_PARAMETER The handle is unknown.
-
- @retval EFI_NOT_FOUND A form on the requested handle cannot be found with
- the requested FormId.
-
- @retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough
- to allow the form to be stored.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_FORMS) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- IN EFI_FORM_ID FormId,
- IN OUT UINTN *BufferLength,
- OUT UINT8 *Buffer
- );
-
-/**
- Extracts the defaults that are associated with a given handle in the HII database.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param Handle The HII handle from which will have default data retrieved.
-
- @param DefaultMask The mask used to specify some type of default override when extracting
- the default image data.
-
- @param VariablePackList A indirect pointer to the first entry of a link list with
- type EFI_HII_VARIABLE_PACK_LIST.
-
- @retval EFI_SUCCESS The VariablePackList was populated with the appropriate
- default setting data.
-
- @retval EFI_NOT_FOUND The IFR does not have any explicit or default map(s).
-
- @retval EFI_INVALID_PARAMETER The HII database entry associated with Handle
- contain invalid data.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_DEFAULT_IMAGE) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- IN UINTN DefaultMask,
- OUT EFI_HII_VARIABLE_PACK_LIST **VariablePackList
- );
-
-/**
- Allows the caller to update a form or form package that has previously been
- registered with the EFI HII database.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param Handle Handle of the package where the form to be updated resides.
-
- @param Label The label inside the form package where the update is to take place.
-
- @param AddData If TRUE, adding data at a given Label; otherwise,
- if FALSE, removing data at a given Label.
-
- @param Data The buffer containing the new tags to insert after the Label
-
- @retval EFI_SUCCESS The form was updated with the new tags.
-
- @retval EFI_INVALID_PARAMETER The buffer for the buffer length does not
- contain an integral number of tags.
-
- @retval EFI_NOT_FOUND The Handle, Label, or FormId was not found.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_UPDATE_FORM) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- IN EFI_FORM_LABEL Label,
- IN BOOLEAN AddData,
- IN EFI_HII_UPDATE_DATA *Data
- );
-
-/**
- Retrieves the current keyboard layout.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
-
- @param DescriptorCount A pointer to the number of Descriptor entries being
- described in the keyboard layout being retrieved.
-
- @param Descriptor A pointer to a buffer containing an array of EFI_KEY_DESCRIPTOR
- entries. Each entry will reflect the definition of a specific physical key.
-
- @retval EFI_SUCCESS The keyboard layout was retrieved successfully.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_KEYBOARD_LAYOUT) (
- IN EFI_HII_PROTOCOL *This,
- OUT UINT16 *DescriptorCount,
- OUT EFI_KEY_DESCRIPTOR *Descriptor
- );
-
-/**
- @par Protocol Description:
- The HII Protocol manages the HII database, which is a repository for data
- having to do with fonts, strings, forms, keyboards, and other future human
- interface items.
-
- @param NewPack
- Extracts the various packs from a package list.
-
- @param RemovePack
- Removes a package from the HII database.
-
- @param FindHandles
- Determines the handles that are currently active in the database.
-
- @param ExportDatabase
- Export the entire contents of the database to a buffer.
-
- @param TestString
- Tests if all of the characters in a string have corresponding font characters.
-
- @param GetGlyph
- Translates a Unicode character into the corresponding font glyph.
-
- @param GlyphToBlt
- Converts a glyph value into a format that is ready for a UGA BLT command.
-
- @param NewString
- Allows a new string to be added to an already existing string package.
-
- @param GetPrimaryLanguages
- Allows a program to determine the primary languages that are supported
- on a given handle.
-
- @param GetSecondaryLanguages
- Allows a program to determine which secondary languages are supported
- on a given handle for a given primary language.
-
- @param GetString
- Extracts a string from a package that is already registered with the
- EFI HII database.
-
- @param ResetString
- Remove any new strings that were added after the initial string export
- for this handle.
-
- @param GetLine
- Allows a program to extract a part of a string of not more than a given width.
-
- @param GetForms
- Allows a program to extract a form or form package that has been previously registered.
-
- @param GetDefaultImage
- Allows a program to extract the nonvolatile image that represents the default storage image.
-
- @param UpdateForm
- Allows a program to update a previously registered form.
-
- @param GetKeyboardLayout
- Allows a program to extract the current keyboard layout.
-
-**/
-struct _EFI_HII_PROTOCOL {
- EFI_HII_NEW_PACK NewPack;
- EFI_HII_REMOVE_PACK RemovePack;
- EFI_HII_FIND_HANDLES FindHandles;
- EFI_HII_EXPORT ExportDatabase;
-
- EFI_HII_TEST_STRING TestString;
- EFI_HII_GET_GLYPH GetGlyph;
- EFI_HII_GLYPH_TO_BLT GlyphToBlt;
-
- EFI_HII_NEW_STRING NewString;
- EFI_HII_GET_PRI_LANGUAGES GetPrimaryLanguages;
- EFI_HII_GET_SEC_LANGUAGES GetSecondaryLanguages;
- EFI_HII_GET_STRING GetString;
- EFI_HII_RESET_STRINGS ResetStrings;
- EFI_HII_GET_LINE GetLine;
- EFI_HII_GET_FORMS GetForms;
- EFI_HII_GET_DEFAULT_IMAGE GetDefaultImage;
- EFI_HII_UPDATE_FORM UpdateForm;
-
- EFI_HII_GET_KEYBOARD_LAYOUT GetKeyboardLayout;
-};
-
-extern EFI_GUID gEfiHiiProtocolGuid;
-
-#endif
diff --git a/Tools/CCode/Source/Include/Protocol/UgaDraw.h b/Tools/CCode/Source/Include/Protocol/UgaDraw.h deleted file mode 100644 index 5586bdfffb..0000000000 --- a/Tools/CCode/Source/Include/Protocol/UgaDraw.h +++ /dev/null @@ -1,168 +0,0 @@ -/** @file
- UGA Draw protocol from the EFI 1.1 specification.
-
- Abstraction of a very simple graphics device.
-
- Copyright (c) 2006, Intel Corporation
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
- Module Name: UgaDraw.h
-
-**/
-
-#ifndef __UGA_DRAW_H__
-#define __UGA_DRAW_H__
-
-#define EFI_UGA_DRAW_PROTOCOL_GUID \
- { \
- 0x982c298b, 0xf4fa, 0x41cb, {0xb8, 0x38, 0x77, 0xaa, 0x68, 0x8f, 0xb8, 0x39 } \
- }
-
-typedef struct _EFI_UGA_DRAW_PROTOCOL EFI_UGA_DRAW_PROTOCOL;
-
-/**
- Return the current video mode information.
-
- @param This Protocol instance pointer.
- @param HorizontalResolution Current video horizontal resolution in pixels
- @param VerticalResolution Current video vertical resolution in pixels
- @param ColorDepth Current video color depth in bits per pixel
- @param RefreshRate Current video refresh rate in Hz.
-
- @retval EFI_SUCCESS Mode information returned.
- @retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
- @retval EFI_INVALID_PARAMETER One of the input args was NULL.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_UGA_DRAW_PROTOCOL_GET_MODE) (
- IN EFI_UGA_DRAW_PROTOCOL *This,
- OUT UINT32 *HorizontalResolution,
- OUT UINT32 *VerticalResolution,
- OUT UINT32 *ColorDepth,
- OUT UINT32 *RefreshRate
- )
-;
-
-/**
- Return the current video mode information.
-
- @param This Protocol instance pointer.
- @param HorizontalResolution Current video horizontal resolution in pixels
- @param VerticalResolution Current video vertical resolution in pixels
- @param ColorDepth Current video color depth in bits per pixel
- @param RefreshRate Current video refresh rate in Hz.
-
- @retval EFI_SUCCESS Mode information returned.
- @retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_UGA_DRAW_PROTOCOL_SET_MODE) (
- IN EFI_UGA_DRAW_PROTOCOL *This,
- IN UINT32 HorizontalResolution,
- IN UINT32 VerticalResolution,
- IN UINT32 ColorDepth,
- IN UINT32 RefreshRate
- )
-;
-
-typedef struct {
- UINT8 Blue;
- UINT8 Green;
- UINT8 Red;
- UINT8 Reserved;
-} EFI_UGA_PIXEL;
-
-typedef union {
- EFI_UGA_PIXEL Pixel;
- UINT32 Raw;
-} EFI_UGA_PIXEL_UNION;
-
-typedef enum {
- EfiUgaVideoFill,
- EfiUgaVideoToBltBuffer,
- EfiUgaBltBufferToVideo,
- EfiUgaVideoToVideo,
- EfiUgaBltMax
-} EFI_UGA_BLT_OPERATION;
-
-/**
- Type specifying a pointer to a function to perform an UGA Blt operation.
-
- The following table defines actions for BltOperations:
-
- <B>EfiUgaVideoFill</B> - Write data from the BltBuffer pixel (SourceX, SourceY)
- directly to every pixel of the video display rectangle
- (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
- Only one pixel will be used from the BltBuffer. Delta is NOT used.
-
- <B>EfiUgaVideoToBltBuffer</B> - Read data from the video display rectangle
- (SourceX, SourceY) (SourceX + Width, SourceY + Height) and place it in
- the BltBuffer rectangle (DestinationX, DestinationY )
- (DestinationX + Width, DestinationY + Height). If DestinationX or
- DestinationY is not zero then Delta must be set to the length in bytes
- of a row in the BltBuffer.
-
- <B>EfiUgaBltBufferToVideo</B> - Write data from the BltBuffer rectangle
- (SourceX, SourceY) (SourceX + Width, SourceY + Height) directly to the
- video display rectangle (DestinationX, DestinationY)
- (DestinationX + Width, DestinationY + Height). If SourceX or SourceY is
- not zero then Delta must be set to the length in bytes of a row in the
- BltBuffer.
-
- <B>EfiUgaVideoToVideo</B> - Copy from the video display rectangle (SourceX, SourceY)
- (SourceX + Width, SourceY + Height) .to the video display rectangle
- (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
- The BltBuffer and Delta are not used in this mode.
-
-
- @param[in] This - Protocol instance pointer.
- @param[in] BltBuffer - Buffer containing data to blit into video buffer. This
- buffer has a size of Width*Height*sizeof(EFI_UGA_PIXEL)
- @param[in] BltOperation - Operation to perform on BlitBuffer and video memory
- @param[in] SourceX - X coordinate of source for the BltBuffer.
- @param[in] SourceY - Y coordinate of source for the BltBuffer.
- @param[in] DestinationX - X coordinate of destination for the BltBuffer.
- @param[in] DestinationY - Y coordinate of destination for the BltBuffer.
- @param[in] Width - Width of rectangle in BltBuffer in pixels.
- @param[in] Height - Hight of rectangle in BltBuffer in pixels.
- @param[in] Delta - OPTIONAL
-
- @retval EFI_SUCCESS - The Blt operation completed.
- @retval EFI_INVALID_PARAMETER - BltOperation is not valid.
- @retval EFI_DEVICE_ERROR - A hardware error occured writting to the video buffer.
-
---*/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_UGA_DRAW_PROTOCOL_BLT) (
- IN EFI_UGA_DRAW_PROTOCOL * This,
- IN EFI_UGA_PIXEL * BltBuffer, OPTIONAL
- IN EFI_UGA_BLT_OPERATION BltOperation,
- IN UINTN SourceX,
- IN UINTN SourceY,
- IN UINTN DestinationX,
- IN UINTN DestinationY,
- IN UINTN Width,
- IN UINTN Height,
- IN UINTN Delta OPTIONAL
- );
-
-struct _EFI_UGA_DRAW_PROTOCOL {
- EFI_UGA_DRAW_PROTOCOL_GET_MODE GetMode;
- EFI_UGA_DRAW_PROTOCOL_SET_MODE SetMode;
- EFI_UGA_DRAW_PROTOCOL_BLT Blt;
-};
-
-extern EFI_GUID gEfiUgaDrawProtocolGuid;
-
-#endif
|