| Age | Commit message (Collapse) | Author |
|---|
|
Recent versions of the Intel C compiler define the _MSC_EXTENSIONS
constant. Base.h checks if this constant is defined to decide whether
or not to use a pragma intrinsic, which is unsupported by the latest
version of the Intel C compiler. Thus the check has been modified to
only pass in the case __INTEL_COMPILER is not defined.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
Juno doesn't have lots of DTB files in NOR flash, it only has 1 file,
called "board.dtb" and the motherboard configuration makes the right
choice about which DTB file gets written as board.dtb in NOR.
The code attempts to select which DTB it should use based on the board
variant or configuration. And this doesn't work because those DTB files
aren't present in NOR flash.
So remove the DTB variants and only load board.dtb.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Code was inserted to create default boot entries for Juno R1. These
don't work, but they are also preventing the board from booting into the
default options that Intel BDS would otherwise boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <Jim_Dailey@Dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
|
|
The variable TimeOut is actually a retry, not a timeout, so I renamed
the variable accordingly.
This patch makes no functional change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
This patch makes a few minor DEBUG output changes:
- Fix typo in DEBUG output: Negociation->Negotiation
- Change DEBUG occurrences of "Lan9118" to "LAN9118" to make grepping
the log output easier.
- Change the warning that auto-negotiation is not supported when
AutoNegotiate() returns an error.
The function already reports if the feature is supported or not and
can also return an error for other reasons.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Add a PCD for the link negotiation timeout so the platform can over-ride
the default value.
The code previously did 2000 iterations of the loop with a 2us stall, so
the code has been changed subtly to set the number of iterations equal
to the PCD value divided by the stall time.
Since the stall time has not changed, the default PCD value is set at
4000 so the original behaviour is not changed.
The problems were discovered when the ARM Juno Development Platform used
the "EFI Network" option with then LAN9118 driver. It fails to boot the
first time and so the board drops back to Shell again:
Warning: LAN9118 Driver in stopped state
Link timeout in auto-negotiation.
Lan9118: Auto Negociation not supported.
EhcExecTransfer: transfer failed with 2
EhcControlTransfer: error - Device Error, transfer - 2
Buffer: EFI Hard Drive
Booting EFI Misc Device
Booting EFI Misc Device 1
Booting EFI Hard Drive
Booting EFI Network
Warning: LAN9118 Driver not initialized
Link timeout in auto-negotiation.
Lan9118: Auto Negociation not supported.
Booting EFI Internal Shell
Exiting Shell drops the user back to the Intel BDS UI. Selecting
"Continue" then succeeds in booting from the EFI Network:
Booting EFI Misc Device
Booting EFI Misc Device 1
Booting EFI Hard Drive
Booting EFI Network
..MnpFreeTxBuf: Duplicated recycle report from SNP.
MnpFreeTxBuf: Duplicated recycle report from SNP.
[snip repeated errors]
Discussion on the edk2-devel mailing list [1] prompted Laszlo Ersek to
suggest the time taken for the NIC to negotiate was causing a problem.
He suggested the solution contained in this patch to provide a PCD
configurable by the platform.
The default PCD value does not work for Juno. Setting the PCD to a
larger value works for Juno R0, R1 and R2.
[1] http://article.gmane.org/gmane.comp.bios.edk2.devel/7341
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
When reviewing my LAN9118 driver PCD patch [1], Ard Biesheuvel noted
that most calls to gBS->Stall() in this driver seem to be used to
prevent timing issues between the device updating data and the host
reading the values. And that replacing most of these calls with a
MemoryFence() would be more robust.
The only exceptions are the stalls that are enclosed inside retry loops:
- in the AutoNegotiate() function.
This stall is waiting for the link to negotiate, which may require
stalling until it is ready.
- in the Lan9118Initialize() function.
These two stalls are waiting for devices and time out after a number
of retries.
- in the SoftReset() function.
This stall is inside a loop where the comment states:
"If time taken exceeds 100us, then there was an error condition"
In these instances, I kept the stall, but also added a MemoryFence().
[1] http://article.gmane.org/gmane.comp.bios.edk2.devel/7389
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
|
|
An earlier change had this function returning the type of lines that were in
the file being read (ASCII or UCS2). The way it is used, UCS2 output is
expected, even when the file being read is ASCII. This change restores that
behavior and documents it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <Jim_Dailey@Dell.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Separate ShellPkg and ShellBinPkg into separate entities.
Add Leif Lindholm and Ard Biesheuvel as ShellBinPkg maintainers
for ARM/AArch64 only.
Add indicaton that Jaben Carsey and Shumin Qiu are maintainers for
Ia32/X64 specifically.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Fix various errors when piping a UNICODE or ASCII file to a simple shell application that reads standard input and writes it to standard output.
1) When the memory file is created by CreateFileInferfaceMem() to capture the pipe output, no UNICODE BOM is written to the memory file. Later, when the memory file is read by the application using ShellFileHandleReadLine(), the function indicates that the file is ASCII because there is no BOM.
2) If the file is piped as ASCII, the ASCII memory image is not correctly created by FileInterfaceMemWrite() as each ASCII character is followed by '\0' in the image (when the ASCII data is written to the memory image, the file position should only be incremented by half the buffer size).
3) ShellFileHandleReadLine() does not read ASCII files correctly (writes to Buffer need to be cast as CHAR8*).
4) FileInterfaceMemRead() and FileInterfaceMemWrite() as somewhat hard to read and difficult to debug with certain tools due to the typecasting of This. Added a local variable (MemFile) of the correct type to these functions and used it instead of This.
Enhancement: ShellFileHandleReadLine() now returns EFI_END_OF_FILE when appropriate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Setup the EFI System Table with information about the
Console Devices early, so that error messages in bds
are printed on the console earlier.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The binaries of ShellBinPkg are generated with ShellPkg from
9a8f6fb40712 ("ArmPlatformPkg: remove unused Sec library").
This reintroduces the non-standard tftp commands that were
unintentionally dropped with svn r18243.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The Sec library was built by the AARCH64 FVP models, but the binary was
unused because it was part of a legacy booting strategy from before ARM
Trusted Firmware came along.
This change requires changes in OpenPlatformPkg to remove the Sec binary
from the FVP build.
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
This platform is untested and no longer supported, so remove it from the
tree.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
ARM Ltd Platform support is migrating to use OpenPlatformPkg [1].
Currently, Juno exists both in EDK2's ArmPlatformPkg and in
OpenPlatformPkg [2]. And they are starting to diverge, with
OpenPlatformPkg being the most up-to-date with current developments.
To prevent this divergence, remove the .dsc and .fdf files from
ArmPlatformPkg and leave OpenPlatformPkg as the master.
We can't remove ArmJuno.dec yet because ACPI still uses it to set the
include path to ArmPlatform.h.
[1] https://git.linaro.org/uefi/OpenPlatformPkg.git
[2] https://git.linaro.org/uefi/OpenPlatformPkg.git/tree/master:/Platforms/ARM/Juno
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
ARM Ltd Platform support is migrating to use OpenPlatformPkg [1].
Currently, FVP exists both in EDK2's ArmPlatformPkg and in
OpenPlatformPkg [2]. And they are starting to diverge, with
OpenPlatformPkg being the most up-to-date with current developments.
To prevent this divergence, remove the .dsc and .fdf files from
ArmPlatformPkg and leave OpenPlatformPkg as the master.
[1] https://git.linaro.org/uefi/OpenPlatformPkg.git
[2] https://git.linaro.org/uefi/OpenPlatformPkg.git/tree/master:/Platforms/ARM/VExpress
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
ARM Ltd Platform support is migrating to use OpenPlatformPkg [1].
Currently, TC2 exists both in EDK2's ArmPlatformPkg and in
OpenPlatformPkg [2]. And they are starting to diverge, with
OpenPlatformPkg being the most up-to-date with current developments.
To prevent this divergence, remove the .dsc and .fdf files from
ArmPlatformPkg and leave OpenPlatformPkg as the master.
[1] https://git.linaro.org/uefi/OpenPlatformPkg.git
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Fix various errors when piping a UNICODE or ASCII file to a simple shell application that reads standard input and writes it to standard output.
1) When the memory file is created by CreateFileInferfaceMem() to capture the pipe output, no UNICODE BOM is written to the memory file. Later, when the memory file is read by the application using ShellFileHandleReadLine(), the function indicates that the file is ASCII because there is no BOM.
2) If the file is piped as ASCII, the ASCII memory image is not correctly created by FileInterfaceMemWrite() as each ASCII character is followed by '\0' in the image (when the ASCII data is written to the memory image, the file position should only be incremented by half the buffer size).
3) ShellFileHandleReadLine() does not read ASCII files correctly (writes to Buffer need to be cast as CHAR8*).
4) FileInterfaceMemRead() and FileInterfaceMemWrite() as somewhat hard to read and difficult to debug with certain tools due to the typecasting of This. Added a local variable (MemFile) of the correct type to these functions and used it instead of This.
Enhancement: ShellFileHandleReadLine() now returns EFI_END_OF_FILE when appropriate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
This implements a version of ArmVirtQemu that does not execute in place from
emulated NOR flash, but implements the Linux kernel boot protocol, and executes
from DRAM instead. This allows UEFI to be loaded as a payload by a previous
bootloader stage such as ARM Trusted Firmware/OP-TEE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
|
|
This introduces ArmQemuRelocatablePlatformLib, which started out as a
straight copy of ArmXenRelocatablePlatformLib, but has been modified so
that ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf can be used with
QEMU as well as with Xen. It retains the self relocation and FDT parsing
for the system memory, but uses the QEMU MMU layout.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
|
|
Allow the use of a patchable PCD for the initial DT base address recorded in
gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress, so that the module
can be reused by a relocatable version of ArmVirtQemu.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
The .dsc and .fdf files in ArmPlatformPkg are unused. Remove them as
part of a general cleanup of ArmPlatformPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
If FV image without DXE depex, it will be dispatched by DxeCore.
If FV image with SMM depex, it is the invalid image. ASSERT will be trig.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
|
|
Some updates to SCR can cause a problem which manifests as an undefined opcode exception.
This may be when a speculative secure instruction fetch happens after the NS bit is set.
An isb is required to make the register change take effect fully.
Contributed-under: Tianocore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <Evan.Lloyd@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The patch fixes a regression bug caused by last check-in which
causes Daylight setting cannot be set when timezone is unspecified.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
|
|
Fix UsbMouseAbsolutePointer driver GetState() interface to return
absolute value instead of relative value.
The driver is ported from UsbMouse driver. The GetState of
SimplePointer protocol returns relative value but the GetState
of AbsolutePointer protocol should return absolute value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
|
|
According to UEFI spec, a BUFFER_FULL return status in UNDI Transmit command
indicates UNDI "Transmit buffer is full. Call Get Status command toempty
buffer." So this patch updates the SNP Transmit to return EFI_NOT_READY for
BUFFER_FULL to let the call know the buffer full status.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
The MNP and SNP are independent drivers so the MNP_TX_BUFFER_INCREASEMENT could choose
any value as needed. While this patch update the default value of this macro to 32,
to be same as the maximum recycled buffer numbers in one UNDI GetStatus command. It is
a workaround for some incorrect UNDI drivers which may not return the correct statuses
for the SNP and MNP to correctly retry/call GetStatus to clear the buffers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
Update the DBsize in GetStatus command to let UNDI return an array of recycled
buffers. This is to make the loop at the end of PxeGetStatus() useful and to
prevent buffer overflow with some non-conformant UNDI drivers which not check
the value of the input DBsize in UNDI GetStatus command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
v4:
* Update macro HTTP_ERROR_STATUS to HTTP_ERROR_OR_NOT_SUPPORT_STATUS_CODE
Update copyright year.
When the Error Status of ResponseData returned from HttpIoRecvResponse
function during the Http HEAD method, it should also return error status
to Load file protocol.
Add a new error status code EFI_HTTP_ERROR in corresponding with the
UEFI 2.6 spec . When a HTTP error occurred during the network operation,
The EFI_HTTP_ERROR is returned in token.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
v2:
*Return the EFI_HTTP_ERROR in the “Status” field in token, instead of
in the status codes returned table of EFI_HTTP_PROTOCOL.Response() interface.
Add a new error status code EFI_HTTP_ERROR in corresponding with
the UEFI 2.6 spec
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
This patch is used to fix suspicious dereference of pointer 'Mode.Ia'
before NULL check.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Add 'mirror' to mirror/backup git repositories, and mark svn as
read-only and deprecated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
(Actually, this is a test to see if SVN is read-only.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19793 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This patch enables QemuBootOrderLib to parse OFW device paths formatted by
QEMU commit a907ec52cc1a:
nvme: generate OpenFirmware device path in the "bootorder" fw_cfg file
With both patches applied, OVMF will honor the bootindex=N property of the
NVMe device:
-drive id=drive0,if=none,format=FORMAT,file=PATHNAME \
-device nvme,drive=drive0,serial=SERIAL,bootindex=N
^^^^^^^^^^^
Cc: Vladislav Vovchenko <vladislav.vovchenko@sk.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reference: https://github.com/tianocore/edk2/issues/48
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Vladislav Vovchenko <vladislav.vovchenko@sk.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19792 6f19259b-4bc3-4df7-8a09-765794883524
|
|
QEMU emulates NVMe. NvmExpressDxe seems to work well with it. The relevant
QEMU options are
-drive id=drive0,if=none,format=FORMAT,file=PATHNAME \
-device nvme,drive=drive0,serial=SERIAL
where the required SERIAL value sets the Serial Number (SN) field of the
"Identify Controller Data Structure". It is an ASCII string with up to 20
characters, which QEMU pads with spaces to maximum length.
(Refer to "NVME_ADMIN_CONTROLLER_DATA.Sn" in
"MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressHci.h".)
Cc: Vladislav Vovchenko <vladislav.vovchenko@sk.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reference: https://github.com/tianocore/edk2/issues/48
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Vladislav Vovchenko <vladislav.vovchenko@sk.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19791 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Problems have been encountered because some of the source files have
execute permission set. This can cause git to report them as changed
when they are checked out onto a file system with inherited permissions.
This has been seen using Cygwin, MinGW and PowerShell Git.
This patch makes no change to source file content, and only aims to
correct the file modes/permissions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19790 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Problems have been encountered because some of the source files have
execute permission set. This can cause git to report them as changed
when they are checked out onto a file system with inherited permissions.
This has been seen using Cygwin, MinGW and PowerShell Git.
This patch makes no change to source file content, and only aims to
correct the file modes/permissions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19789 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Problems have been encountered because some of the source files have
execute permission set. This can cause git to report them as changed
when they are checked out onto a file system with inherited permissions.
This has been seen using Cygwin, MinGW and PowerShell Git.
This patch makes no change to source file content, and only aims to
correct the file modes/permissions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19788 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Problems have been encountered because some of the source files have
execute permission set. This can cause git to report them as changed
when they are checked out onto a file system with inherited permissions.
This has been seen using Cygwin, MinGW and PowerShell Git.
This patch makes no change to source file content, and only aims to
correct the file modes/permissions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19787 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Auth variable
Add a new cert data base "certdbv" to store signer certs for volatile time based
Auth variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19786 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add BS+RT+AT variable attribute definition.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19785 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add new enum EfiPlatformConfigurationActionUnsupportedGuid to
EFI_PLATFORM_CONFIGURATION_ACTION to be used by Response() when
Query() returns a unsupported ParameterTypeGuid.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19784 6f19259b-4bc3-4df7-8a09-765794883524
|
|
When SetTime() is called with EFI_UNSPECIFIED_TIMEZONE, the code
can optimally not create the private timezone variable because
absence of timezone variable indicates the timezone is unspecified.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19783 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19782 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This patch is used to correct inconsistent function descriptions
in DnsDxe.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19781 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This patch is used to correct inconsistent function descriptions
in Dns4.h and Dns6.h.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19780 6f19259b-4bc3-4df7-8a09-765794883524
|
