| Age | Commit message (Collapse) | Author |
|---|
|
The comments in the code should speak for themselves; here we note only
two facts:
- The PCI config space writes (to the PCIEXBAR register) are performed
using the 0xCF8 / 0xCFC IO ports, by virtue of PciLib being resolved to
BasePciLibCf8. (This library resolution will permanently remain in place
for the PEI phase.)
- Since PCIEXBAR counts as a chipset register, it is the responsibility of
the firmware to reprogram it at S3 resume. Therefore
PciExBarInitialization() is called regardless of the boot path. (Marcel
recently posted patches for SeaBIOS that implement this.)
This patch suffices to enable PCIEXBAR (and the dependent ACPI table
generation in QEMU), for the sake of "PCIeHotplug" in the Linux guest:
ACPI: MCFG 0x000000007E17F000 00003C
(v01 BOCHS BXPCMCFG 00000001 BXPC 00000001)
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff]
(base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
acpi PNP0A08:00: _OSC: OS supports
[ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls
[PCIeHotplug PME AER PCIeCapability]
In the following patches, we'll equip the core PCI host bridge / root
bridge driver and the rest of DXE as well to utilize ECAM on Q35.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michał Zegan <webczat_200@poczta.onet.pl>
Ref: https://github.com/tianocore/edk2/issues/32
Ref: http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/10548
Suggested-by: Marcel Apfelbaum <marcel@redhat.com>
Reported-by: Michał Zegan <webczat_200@poczta.onet.pl>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Michał Zegan <webczat_200@poczta.onet.pl>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
Gerd has advised us that long term support Q35 machine types have no low
RAM above 2GB, hence we should utilize the [2GB, 3GB) gap -- that we
currently leave unused -- for MMIO. (Plus, later in this series, for the
PCIEXBAR too.)
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michał Zegan <webczat_200@poczta.onet.pl>
Ref: https://github.com/tianocore/edk2/issues/32
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/8707/focus=8817
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Michał Zegan <webczat_200@poczta.onet.pl>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
Section 5.1.16 ("PCIEXBAR -- PCI Express Register Range Base Address") in
Intel document #316966-002 (already referenced near the top of this header
file) describes the Q35 DRAM Controller register that configures the
memory-mapped PCI config space (also known as MMCONFIG, and ECAM /
Enhanced Configuration Access Method).
In this patch we add the macros we'll need later. We'll only support the
256 MB memory-mapped config space -- enough for buses [0, 255].
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michał Zegan <webczat_200@poczta.onet.pl>
Ref: https://github.com/tianocore/edk2/issues/32
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Michał Zegan <webczat_200@poczta.onet.pl>
|
|
The script is updated to support both python 2.7 and python 3.
v2:
* Use io.open() rather than open() (Jaben)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
|
|
Convert to use the argparse library rather than optparse.
As part of the conversion, the script will now give an error message
if no arguments are given. Previously the script would give an
exception when no arguments were given.
Fixes: https://github.com/tianocore/edk2/issues/65
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
The script previously would hit an exception if it was run outside of
a git tree.
The exception looked like:
edk2/BaseTools/Scripts/ConvertMasmToNasm.py Version 0.01
Traceback (most recent call last):
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 986, in <module>
ConvertAsmApp()
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 984, in __init__
ConvertAsmFile(src, dst, self)
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 209, in __init__
CommonUtils.__init__(self, clone)
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 69, in __init__
self.gitemail = clone.gitemail
AttributeError: ConvertAsmApp instance has no attribute 'gitemail'
Fixes: https://github.com/tianocore/edk2/issues/63
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Instead of only handling SEC Core or PEI Core instances in the outer FV,
the GenFv tool will now recurse into FV image FFS files to look for instances
in encapsulated FVs so the vector area can be updated appropriately.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
For VOID* Pcd with {} value, If platform developer wants to put in a
specific hex offset value that is not 8-byte aligned for VOID * then we
allow it with a warning message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
After submitting changes for HttpLib, other modules should be able to use
those functions
1 remove the private function and their calls
2 update it with the functions from httpLib
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ghazi Belaam <Ghazi.belaam@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
There some usefull functions in edk2 private modules that could be used,
so we added them to the httpLib
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ghazi Belaam <Ghazi.belaam@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
gMaximumBasicFunction is set to CPUID_SIGNATURE as below, so removed the compare code.
UINT32 gMaximumBasicFunction = CPUID_SIGNATURE;
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
UefiCpuPkg/Application/Cpuid: Remove unnecessary code check
gMaximumBasicFunction is set to CPUID_SIGNATURE as below, so removed the compare code.
UINT32 gMaximumBasicFunction = CPUID_SIGNATURE;
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
UefiCpuPkg/Application/Cpuid: Remove unnecessary code check
gMaximumBasicFunction is set to CPUID_SIGNATURE as below, so removed the compare code.
UINT32 gMaximumBasicFunction = CPUID_SIGNATURE;
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
|
|
Add check for gMaximumBasicFunction in CpuidVersionInfo () back.
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
|
|
Use DOS format end of line(CR, LF).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
This patch makes sure the MODULE_DIR variable points to the correct
location when multiple workspaces are used. Currently, it is
always prefixed with $(WORKSPACE), which only works as long as the
package is in the Workspace.
Code modules were not effected because the required paths were valid,
but for custom Makefiles, the MODULE_DIR variable is used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
The maximum number of PEI performance log entries is 255.
Add a new PCD, PcdMaxPeiPerformanceLogEntries16, to increase the maximum
number of PEI performance log entries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Joseph Shifflett <joseph.shifflett@hpe.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Enable the network2 commands when NETWORK_IP6_ENABLE is TRUE, so we
would have Ping6 and Ifconfig6.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
[lersek@redhat.com: added the word "Shell" to the subject]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Support UEFI shell execution break.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Support UEFI shell execution break.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Some static scan tool may regard CurrentRsdtEntry to be potentially
referenced to NULL pointer if CurrentRsdtEntry == NULL is used in
the right above if condition judgment.
CopyMem (CurrentRsdtEntry, CurrentRsdtEntry + 1, (*NumberOfTableEntries - Index) * sizeof (UINT32));
It is introduced by commit f9bbb8d9c3f065faba9f266cf4e731fe2ca70c4d.
To avoid it and have same style with
"((Xsdt == NULL) || CurrentTablePointer64 == (UINT64) (UINTN) Table->Table)",
use Rsdt instead of CurrentRsdtEntry to check against NULL.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Shumin Qiu <shumin.qiu@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
|
|
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/IoFifo.asm to X64/IoFifo.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/IoFifo.asm to Ia32/IoFifo.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
According to the new Shell spec, we add Network2 profile and
merge Ping6 and Ifconfig6 tools to Shell command.
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-By: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Commit fa848a404894 ("NetworkPkg: Add URI configuration form to HTTP boot
driver") causes the build to fail with gcc:
> NetworkPkg/HttpBootDxe/HttpBootConfig.c: In function
> 'HttpBootAddBootOption':
> NetworkPkg/HttpBootDxe/HttpBootConfig.c:148:14:
> error: passing argument 3 of 'GetVariable2' from incompatible pointer
> type [-Werror]
> );
> ^
> In file included from NetworkPkg/HttpBootDxe/HttpBootDxe.h:31:0,
> from NetworkPkg/HttpBootDxe/HttpBootConfig.c:15:
> MdePkg/Include/Library/UefiLib.h:708:1: note: expected 'void **' but
> argument is of type 'CHAR16 **'
> GetVariable2 (
> ^
> cc1: all warnings being treated as errors
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
-----Original Message-----
From: Leahy, Leroy P
Sent: Friday, March 4, 2016 8:58 AM
To: Ni, Ruiyu <ruiyu.ni@intel.com>; edk2-devel@lists.01.org; Bjorge, Erik C <erik.c.bjorge@intel.com>
Cc: Leahy, Leroy P <leroy.p.leahy@intel.com>
Subject: [PATCH 3/9] CorebootPayloadPkg/PlatformBdsLib: Fix spelling error
Change vender to vendor
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
|
|
The patch enhances the UefiBootManagerLib to use more user-friendly
network boot option description.
It builds description like below:
"PXEv6 (MAC:112233445566 VLAN1)"
"HTTPv4 (MAC:112233445566)"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
|
|
Fix ACPI 6.0 and 6.1 NFIT GUID definitions to avoid GCC compiler error
for missing braces.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
Add gEfiIa32X64ProcessorErrorSectionGuid and
gEfiArmProcessorErrorSectionGuid to
match the definition in the UEFI 2.6 specification Table 249.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
v2:
*Modify the logic of show SAD,SPD and PAD help info, include them in -?
instead of follow -p command.
Since Shell supports finding help information from resource section
of application image. We modify the Shell application Under NetworkPkg
to support print help information string using -? command.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
This patch updates the HTTP boot driver to produce a setup page for the boot
file URI configuration. A new boot option will be created for the manual
configured URI address. This change is made to support the HTTP boot usage
in home environment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
This got broken in committing, due to a catalogue of broken practices.
Firstly, we should *pull* git submissions, never recommit them. You
preserve the correct history then, and don't risk rebasing to result in
a history which *never* worked in the form that gets preserved.
That would have kept the authorship attrbution correct too.
Secondly, we shouldn't be storing CRLF line endings in the objects that
git stores in its database. It is designed to store simple LF line endings,
and then check that out as appropriate for the system (resulting in CRLF
in the working tree for Windows users, as they expect). That would avoid
this problem, and all the other problems we have with patches being
exchanged.
Make it executable too, which also got lost in the commit mess.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
|
OpenSSL 1.1 (as well as our backport to 1.0.2) now allows us to run its
standard Configure script and import the result into the EDK II source
repository for others to build natively. The opensslconf.h file and the
list of files in OpensslLib.inf don't need to be managed manually.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Tested-by: Qin Long <qin.long@intel.com>
|
|
This is pull request #755 for OpenSSL 1.1, along with a little extra fix
in the RSA_NET code which has been removed from 1.1 so we can't fix it
there.
https://github.com/openssl/openssl/pull/755
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Tested-by: Qin Long <qin.long@intel.com>
|
|
Support for the UEFI target has been added to OpenSSL in commit 4d60c7e10.
Drop our partial implementation and use a backported version of what's
upstream. This includes a couple of fixes which will be needed when we
automatically generate the file list and opensslconf.h instead of
manually maintaining those.
This includes the subsequent fix in commit fb4844bbc.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Tested-by: Qin Long <qin.long@intel.com>
|
|
Instead of commenting out the Signed Certificate Timestamps purely based
on the OPENSSL_SYS_UEFI flag, OpenSSL 1.1 supports a no-sct configuration
option, added in commit 05d7bf6c5. Drop our own hack and use that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Tested-by: Qin Long <qin.long@intel.com>
|
|
A more complete implementation of the X509_V_FLAG_NO_CHECK_TIME flag was
added to OpenSSL 1.1 as commit d35ff2c0a. Drop our own version and use a
backport of what was committed upstream.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Tested-by: Qin Long <qin.long@intel.com>
|
|
A more complete fix for the no-cms configuration has been added to
OpenSSL 1.1 as commit e968561d5. Drop our own version and use a
backport of what was committed upstream.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Tested-by: Qin Long <qin.long@intel.com>
|
|
A different fix for the excessive stack usage has been merged into
OpenSSL 1.1 as commit 8e704858f. Drop our own version and use a backport
of what was committed upstream.
Note: This requires the free() function to work correctly when passed
a NULL argument (qv).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Tested-by: Qin Long <qin.long@intel.com>
|
|
A complete implementation of the no-filenames configuration option was
added to OpenSSL 1.1 in commit 02f7114a7. Drop our own version and use
a backport of what was committed upstream.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Tested-by: Qin Long <qin.long@intel.com>
|
|
Extensive fixes for the no-stdio configuration have been merged into
OpenSSL 1.1, primarily in commit 984d6c605.
The backport to 1.0.2 is slightly different because we still have a
mixture of no-fp-api and no-stdio in 1.0.2, although they are hopelessly
intertwined. Nevertheless, drop our own original version and switch to
a backported version of what went into 1.1.
This includes subsequent fixes in commit c0cf5b84d for the TS code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Tested-by: Qin Long <qin.long@intel.com>
|
|
A different fix for the PKCS7_verify() regression on Authenticode
signatures has landed in the OpenSSL 1.0.2 branch as commit c436c990f
and will be present in the 1.0.2g release.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Tested-by: Qin Long <qin.long@intel.com>
|
|
All the OpenSSL changes we carry in our EDKII_openssl patch for 1.0.2
are now merged into upstream OpenSSL and will be in the upcoming 1.1
release.
As a first step towards switching out our original hacks for backported
versions of the commits which were actually accepted into OpenSSL 1.1,
just regenerate the *existing* patch against the 1.0.2f release using
'git diff'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Tested-by: Qin Long <qin.long@intel.com>
|
|
This can be an auto-generated file, and it *isn't* in the OpenSSL git tree;
it's only in the generated tarballs. So rather than including it in our
OpenSSL patch, just have the user copy it into place.
This makes it easier to manage changes, and is a step towards better
integration.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Tested-by: Qin Long <qin.long@intel.com>
|
|
The standard OpenSSL 1.0.2 configuration and build process will already
symlink or copy the necessary header files to the include/openssl/
directory within the OpenSSL source tree.
When we transition to OpenSSL 1.1 it won't even be necessary to link
or copy the files there; they have just been moved outright.
So let's use them from there. Change the include directory specified
in CryptoPkg/CryptoPkg.dec, and modify the Install.cmd and Install.sh
scripts to copy the files to the normal directory within the OpenSSL
source tree, instead of CryptoPkg/Include/openssl/.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Tested-by: Qin Long <qin.long@intel.com>
|
|
Fix SMBIOSVIEW decode of the HeaderLog fields of the PCIe
AER structure . The PCIe 2.1 Base Specification, section 7.10, lists
this as 16 bytes, or 4 DWORDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
1. The consumer of Acpi Sdt Protocol may want to use the API after ReadyToLock.
2. The ACPI system configuration table even could be overwritten,
we see little issue in leaving Acpi Sdt Protocol installed.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
Failing to set EFI_MEMORY_UC to MMIO aperture is not a fatal error.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
|
