| Age | Commit message (Collapse) | Author |
|---|
|
Change HttpDxe and HttpBootDxe to use the standard definitions from
Http11.h instead of private duplicate definitions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
Now we add new HII action type EFI_BROWSER_ACTION_SUBMITTED in
EFI HII Configuration Access Protocol, so add the test case in
DriverSample to show how to use it and whether it works.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Add new HII action type EFI_BROWSER_ACTION_SUBMITTED
to notify HII driver when its question values are submitted.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Base on the UEFI2.6, Add the new HII action type
EFI_BROWSER_ACTION_SUBMITTED to notify HII driver
when its question values are submitted.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Add UEFI application to UefiCpuPkg to display all supported CPUID
leafs and sub-leafs described by UefiCpuPkg/Include/Register/Cpuid.h
that is based on information from Intel(R) 64 and IA-32
Architectures Software Developer's Manual, Volume 2A, December
2015, CPUID instruction.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
|
|
Add CPUID leaf and sub-leaf indexes and structures as described by
Intel(R) 64 and IA-32 Architectures Software Developer's Manual,
Volume 2A, December 2015, CPUID instruction.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
|
|
Newer GCC compilers use a default of march higher than i586
for -m32 (IA32 configuration) and this is causing generation of
instructions that are not compatible with all IA32 targets.
Specically Galileo platform support in the QuarkPlatformPkg does
not boot if GCC48 or higher is used.
This is similar to the following checkin that was done to address
this same issue for VS2012 and higher tool chains:
SHA-1: 71028ba2c4c398d70475504e671d048d9003d90f
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leroy Leahy <leroy.p.leahy@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
According to the spec, each entry in the Memory
Attributes table shall have the same type as
the region it was carved out of in the UEFI memory map.
The current attribute uses RTData for PE Data, but
it should be RTCode.
This patch fixed the issue. It is validated with or
without PropertiesTable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
This is caused by my last commit,the LoadOption may
not initialize when call FreePool, and after investigation,
find that we can delete the LoadOption variable, this patch
is to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Add the definition for the new return status code defined in UEFI 2.6.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
This adds the new Virtio-RNG DXE module to all three builds of
OvmfPkg. Note that QEMU needs to be invoked with the 'device
virtio-rng-pci' option in order for this device to be exposed to
the guest.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
This adds the new Virtio-RNG DXE module to the default build of
ArmVirtQemu. Note that QEMU needs to be invoked with the 'device
virtio-rng-pci' option in order for this device to be exposed to
the guest.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
This implements a UEFI driver model driver for Virtio devices of type
VIRTIO_SUBSYSTEM_ENTROPY_SOURCE, and exposes them via instances of
the EFI_RNG_PROTOCOL protocol, supporting the EFI_RNG_ALGORITHM_RAW
algorithm only.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
VirtioLib provides an API for simple, synchronous (request/response-style)
virtio communication. The guest driver builds one descriptor chain, link
for link, with VirtioPrepare() and VirtioAppendDesc(), then submits the
chain, and awaits the processing, with VirtioFlush().
The descriptor chain is always built at the beginning of the descriptor
area, with the head descriptor having descriptor index 0.
In order to submit the descriptor chain to the host, the guest always
pushes a new "available element" to the Available Ring, in genuine
queue-like fashion, with the new element referencing the head descriptor
(which always has index 0, see above).
In turn, after processing, the host always pushes a new "used element" to
the Used Ring, in genuine queue-like fashion, with the new element
referencing the head descriptor of the chain that was just processed. The
same element also reports the number of bytes that the host wrote,
consecutively across the host-writeable buffers that were linked by the
descriptors.
(See "OvmfPkg/VirtioNetDxe/TechNotes.txt" for a diagram about the
descriptor area and the rings.)
Because at most one descriptor chain can be in flight with VirtioLib at
any time,
- the Available Ring and the Used Ring proceed in lock-step,
- and the head descriptor that the new "available" and "used" elements can
ever reference has index 0.
Based on the above, we can modify VirtioFlush() to return the number of
bytes written by the host across the descriptor chain. The virtio-block
and virtio-scsi drivers don't care (they have other ways to parse the data
produced by the host), while the virtio-net driver doesn't use
VirtioFlush() at all (it employs VirtioLib only to set up its rings).
However, the virtio entropy device, to be covered in the upcoming
patches, reports the amount of randomness produced by the host only
through this quantity.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
Currently, we don't pick up removable media (USB drives) or storage
devices connected via plug-in cards. Take the sledge hammer approach
for now.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
The ACPI spec predates the AARCH64 architecture by 5 versions, so there
is no point in supporting anything below v5.0. So set the PCD that
controls the ACPI table generation to the appropriate value.
Note that the current consumers of this PCD only check whether bit 1
is set or not (i.e., ACPI v1.0b), but this may change in the future,
so let's choose a meaningful value right away.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
AARCH64 systems never require compatibility with legacy ACPI OSes, and
may not have any 32-bit addressable system RAM. To support ACPI on these
systems, we need to be able to relax the 4 GB allocation restriction.
So add a PCD PcdAcpiExposedTableVersions containing a bitmask describing
which ACPI versions are targeted, and wire it up it up to the memory
allocation calls in AcpiTableDxe/AcpiTableProtocol.c. I.e., if ACPI v1.0b
is not among the supported versions, the memory allocations are not limited
to 4 GB, and only table types that carry 64-bit addresses are emitted.
Note that this will inhibit the publishing of any tables that carry only
32-bit addresses, i.e., RSDPv1, RSDTv1 and RSDTv3.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Since Shell supports finding help information from resource section
of application image. We enhance the HelloWorld to add help information
string. After the HelloWorld are loaded in system the help string will
be stored in resource section of the application image.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
UEFI Shell scandalizes the help message in spec level so that a standalone
UEFI shell application can never get "-?" switch, instead the Shell core
(interpreter) detects the "-?" and finds .MAN file for that shell
application in certain spec defined paths, then show the help extracted
from that .MAN file.
But it means distributing a UEFI shell application not only means
distributing a .EFI file but also distributing a .MAN file. If the text
formatted .MAN file is corrupted (edited by user by mistake), or is
missing (deleted by user by mistake), no help will be shown to user.
So this patch enhance the Shell to make it support finding help message
imbedded in resource section of application image.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paulo Alcantara <paulo.alc.cavalcanti@hp.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
The AArch64 DAIF bits are different for reading (mrs) versus writing (msr).
The bitmask definitions assumed they were the same causing incorrect
results when trying to determine the current interrupt state through
GetInterruptState.
The logic for interpreting the DAIF read data using the csel instruction
was also incorrect and is fixed.
Replaced the magic numbers in DisableInterrupts.S and EnableInterrupts.S
with definitions for the DAIF write (daifset/daifclr) IRQ field.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Update the CpuDxe driver to remove an assumption that it is the only
component modifying interrupt state since this can be done through BaseLib
as well. Instead of using a global variable for last interrupt state we
now check the current PSTATE value directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
The AArch64 DAIF bits are different for reading (mrs) versus writing
(msr). The bitmask definitions assumed they were the same causing
incorrect results when trying to determine the current interrupt
state through ArmGetInterruptState.
The logic for interpreting the DAIF read data using the csel instruction
was also incorrect and is fixed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Refine the code in function Var_UpdateDriverOption and Var_UpdateBootOption,
use the existed API(EfiBootManagerInitializeLoadOption and
EfiBootManagerAddLoadOptionVariable) supplied by UefiBootManagerLib
to replace the same logic in the two functions. And remove the useless
code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
when has next line to draw, should not overwrite the BltX
to 0, instead should keep the BltX value that pass into
StringToImage function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
|
|
OpenSSL has released version 1.0.2f with two security fixes
(http://www.openssl.org/news/secadv/20160128.txt) at 28-Jan-2016.
Upgrade the supported OpenSSL version in CryptoPkg/OpensslLib
to catch the latest release 1.0.2f.
(NOTE: The patch file was just re-generated, and no new source
changes was introduced for 1.0.2f enabling)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
|
|
Do NULL pointer check before the pointer is used to avoid dereferenced.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
If XD is supported, then SMM enables it. The non-SMM execution
environment can choose to enable or disable XD, so the state of
XD must be detected in each SMI and be enabled/restored.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
The function CheckFeatureSupported() is used as an EFI_AP_PROCEDURE
in the MP Services Protocol service StartAllAPs(). Any function
used as an EFI_AP_PROCEDURE must use EFIAPI calling convention.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
No ARM support for ACPI is planned under any OS we intend to run under
ArmVirtQemu-ARM, so remove the drivers from the ARM build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
TPM state string update requires HiiHandle which may not be initialized when calling ExtractConfig.
Move this logic to CallBack function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
|
|
The HeaderLog field of the PCIe Extended Capabilities Advanced Error
Reporting structure was incorrectly defined as a 32-bit field. The PCIe
2.1 Base Specification, section 7.10, lists this as 16 bytes, or 4
DWORDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
when no line directive in file, the tool still need to strip the typedef
statement (eg: typedef struct, typedef union ..).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
When the last line in a script file is not an empty line the Shell
will not execute the command in the last line. The patch refine the
logic in function 'ShellFileHandleReturnLine' and fix the issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
|
|
UEFI Spec 2.3.1.D Section 9.3.5.1 says Partitions are numbered
according to their entry in their respective partition table,
starting with 1.
Update the code for MBR partition to follow this rule.
Ref: https://github.com/tianocore/edk2/issues/50
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
|
|
FALSE
UEFI2.6 specification does not recommend to use BIT0
attribute for PropertiesTable, so we change default
value to FALSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
Reviewed-by: "Ard Biesheuvel" <ard.biesheuvel@linaro.org>
Reviewed-by: "Laszlo Ersek" <lersek@redhat.com>
|
|
There are no functional changes in this patch.
The only change is to the XML format, updated using Visual Studio
Edit->Advanced->Format Document.
Different XML Schema editors use different formats for indentation and
line breaks. Visual Studio 2013 uses a two space indentation for content.
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Larry Hauch <larry.hauch@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
The Juno .dsc and .fdf files were recently deleted (currently held
in OpenPlatformPkg), but a spurious Makefile for building using it
was left in place. Drop the Makefile to complete the cleanup.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Harking back to the earliest days of software development for AArch64,
this piece of code abstracted away "early setup stuff" when the
software model came out of reset.
However, it is unmaintained and has been superseded by ARM Trusted
Firmware. So drop it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
The legacy 32-bit SMBIOS entry point has little use on AARCH64 systems,
since many such systems have no 32-bit addressable physical RAM, and so
OSes that implement SMBIOS will have to be able to deal with the 64-bit
entry point anyway.
Given that the OS will map main memory in 1 GB chunks if it can, and that
punching a page sized hole (e.g., for SMBIOS data) into it will result in
the whole 1 GB chunk being mapped using 2 MB and 4 KB blocks instead, it
is important to group memory reservations from the OS as much as we can,
and allocating below 4 GB for no good reason interferes with that.
This is especially important under virtualization, considering that each
*level* of lookup at stage 1 (the guest virtual page table) will result in
a full page table walk at stage 2 (the guest PA to host PA mapping).
So expose only the 64-bit entry point when the SMBIOS tables adhere to
version 3.0 or later.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
The pointer 'FileInterface->Buffer' returned from 'AllocateZeroPool' in function
'CreateFileInterfaceMem' may be NULL and will be dereferenced at the following code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
This patch is used to replace the internal function with
the exposed one defined in NetLib.h.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
This patch is used to define a general function to create
DNS QName.
QName is a domain name represented as a sequence
of labels, where each label consists of a length octet
followed by that number of octets. The domain name terminates
with the zero length octet for the null label of the root.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
The way the first use of the "_maxMode" variable is commented out (i.e.,
together with the enclosing "if" statement) in GetOptimum() triggers the
"misleading-indentation" warning that is new in gcc-6.0, for the block of
code that originally depended on the "if" statement. Gcc believes
(mistakenly) that the programmer believes (mistakenly) that the block
depends on (repIndex == 0) higher up.
Restore the if statement, with a controlling expression that comprises the
constant 1 and "_maxMode" commented out.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reported-by: Cole Robinson <crobinso@redhat.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Build-tested-by: Cole Robinson <crobinso@redhat.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1307439
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
The Help information provided by VolInfo does not follow the EDK II Tools
Design doc, so this patch update the help text and add the generic
options: -d, -v, -q, -s.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
when build.py was failing to build packages but was not providing any
error message except for “Failed to start command.” this patch provide
the error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
current GCC build report error: 'for' loop initial declarations are only
allowed in C99 or C11 mode, the patch fix this failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Replace gBS->LocateHandle with gBS->LocateHandleBuffer
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
|
|
Replace gBS->LocateHandle with gBS->LocateHandleBuffer
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
|
