| Age | Commit message (Collapse) | Author |
|---|
|
function called.
The SendForm function can be called nest in it. This function also uses some global variables. So we must save global variable values before it been called again.
Checked in the missing change for gBrowserFormSetList.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18681 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This is patch to add smbios measurement.
The problem of current SMBIOS measurement is:
1) TCG drivers do not support SMBIOS3.0 table.
2) TCG drivers do not follow TCG platform spec on: "Platform configuration information that is automatically updated,
such as clock registers, and system unique information, such as asset numbers or serial numbers,
MUST NOT be measured into PCR [1], or any other PCR."
So we decide to move Smbios measurement from TCG drivers to Smbios driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18680 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Ma, Maurice" <maurice.ma@intel.com>
Reviewed-by: "Rangarajan, Ravi P" <ravi.p.rangarajan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18679 6f19259b-4bc3-4df7-8a09-765794883524
|
|
We do not consider microcode not found as critical error, because Microcode might be applied later.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Ma, Maurice" <maurice.ma@intel.com>
Reviewed-by: "Rangarajan, Ravi P" <ravi.p.rangarajan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18678 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This is patch to remove smbios measurement in TCG driver. There will be other patch to add it in Smbios driver.
The problem of current SMBIOS measurement is:
1) TCG drivers do not support SMBIOS3.0 table.
2) TCG drivers do not follow TCG platform spec on: "Platform configuration information that is automatically updated,
such as clock registers, and system unique information, such as asset numbers or serial numbers,
MUST NOT be measured into PCR [1], or any other PCR."
So we decide to move Smbios measurement from TCG drivers to Smbios driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18677 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Previous TCG2 configuration UI always add all TCG defined hash algorithm to let user select which one need be used.
This brings risk that user might select unsupported hash, and selection is rejected later.
So we enhance to UI to hide unsupported hash algorithm.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18676 6f19259b-4bc3-4df7-8a09-765794883524
|
|
when the absolute path is given to '-f', it would create some redundant
empty directories.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18675 6f19259b-4bc3-4df7-8a09-765794883524
|
|
So that other module can also refer to them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18674 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The PiSmmCpuDxeSmm module does not use any services from the SmmLib.
This change removes the SmmLib from PiSmmCpuDxeSmm module and also
removes the lib mapping in the UefiCpuPkg DSC file because no other
modules in the UefiCpuPkg use the SmmLib.
Removal of SmmLib is now possible because the only API call to it,
ClearSmi(), was ultimately removed from PiSmmCpuDxeSmm -- see the
"BUGBUG" comment in git commit 529a5a86.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18673 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Before introducing the SMM driver interface, clean up #include directives
and [LibraryClasses] by:
- removing what's not directly used (HobLib and UefiLib),
- adding what's used but not spelled out (DevicePathLib),
- sorting the result.
This helps with seeing each source file's dependencies and with
determining the library classes for the SMM driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18672 6f19259b-4bc3-4df7-8a09-765794883524
|
|
In preparation for introducing an SMM interface to this driver, move the
following traits to separate files, so that we can replace them in the new
SMM INF file:
- Protocol installations. The SMM driver will install protocol interfaces
in the SMM protocol database, using SMM services.
- Virtual address change handler and pointer conversions. SMM drivers run
with physical mappings and pointers must not be converted.
There are further restrictions and changes for an SMM driver, but the rest
of the code either complies with those already, or will handle the changes
transparently. For example:
- SMM drivers have access to both UEFI and SMM protocols in their entry
points (see the PI spec 1.4, "1.7 SMM Driver Initialization"),
- MemoryAllocationLib has an SMM instance that serves allocation requests
with the gSmst->SmmAllocatePool() service transparently, allocating
runtime-marked SMRAM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18671 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Currently the EFI_FW_VOL_INSTANCE and ESAL_FWB_GLOBAL structures declare
the following entries as arrays, with two entries each:
- EFI_FW_VOL_INSTANCE.FvBase[2]
- ESAL_FWB_GLOBAL.FvInstance[2]
In every case, the entry at subscript zero is meant as "physical address",
while the entry at subscript one is meant as "virtual address" -- a
pointer to the same object. The virtual address entry is originally
initialized to the physical address, and then it is converted to the
virtual mapping in FvbVirtualddressChangeEvent().
Functions that (a) read the listed fields and (b) run both before and
after the virtual address change event -- since this is a runtime DXE
driver -- derive the correct array subscript by calling the
EfiGoneVirtual() function from UefiRuntimeLib.
The problem with the above infrastructure is that it's entirely
superfluous.
EfiGoneVirtual() "knows" whether EFI has gone virtual only because the
UefiRuntimeLib constructor registers the exact same kind of virtual
address change callback, and the callback flips a static variabe to TRUE,
and EfiGoneVirtual() queries that static variable.
In effect this means for QemuFlashFvbServicesRuntimeDxe: "when there is a
virtual address change, convert the entries with subscript one from
physical to virtual, and from then on use the entries with subscript one".
This would only make sense if QemuFlashFvbServicesRuntimeDxe ever needed
the original (physical) addresses (ie. the entries with subscript zero)
after the virtual address change, but that is not the case.
Replace the arrays with single elements. The subscript zero elements
simply disappear, and the single elements take the role of the prior
subscript one elements.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18670 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The ESAL_FWB_GLOBAL.FvbScratchSpace array is never initialized (it
contains garbage from AllocateRuntimePool()). Its element at subscript one
(=FVB_VIRTUAL), containing garbage as well, is converted to virtual
mapping. Then the array is never used again.
Remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18669 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The EFI_FW_VOL_INSTANCE.FvbDevLock member is initialized and then never
used. Remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18668 6f19259b-4bc3-4df7-8a09-765794883524
|
|
We build this driver for X64 as well -- the comment isn't overly
important, but it shouldn't be misleading.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18667 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Some of the line lengths in this driver are atrocious. While we have to
put up with the status quo outside of OvmfPkg, we can at least rewrap this
driver before refactoring it.
In the FvbInitialize() function there's no way around introducing two
local variables, just for the sake of sensibly rewrapping the code.
Furthermore, in "FwBlockService.c" the function comment blocks are now
indented; their original position causes diff to print bogus function
names at the top of hunks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18666 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18665 6f19259b-4bc3-4df7-8a09-765794883524
|
|
1. Add a new function 'RunShellCommand' to return command status, thus 'EfiShellExecute' can get the command return status of 'CommandLine'.
2. Refine the code logic of 'EfiShellExecute' to make the new image of shell be loaded only if 'Environment' isn't NULL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Signed-off-by: Jin Eric <eric.jin@intel.com>
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18664 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add new added MultipleWorkspace.py in the common dependency to freeze
python tools for Windows.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18663 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Make the BmFindLoadOption function public
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18662 6f19259b-4bc3-4df7-8a09-765794883524
|
|
We already added the extern declaration for protocols/PPI/GUID in AutoGen.h
file for driver, but missing this feature for the Library. so this patch
add it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18661 6f19259b-4bc3-4df7-8a09-765794883524
|
|
As the title, this patch is to add back the useful information.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18660 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Changing 'tftp' command's help output .uni file to match other EDK2 Shell commands as well as adjusting error messages text.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18659 6f19259b-4bc3-4df7-8a09-765794883524
|
|
For a hot plug bridge with device attached, PciBusDxe driver reserves
the resources which equal to the total amount of padding resource
returned from HotPlug->GetResourcePadding() and the actual occupied
resource by the attached device. The behavior is incorrect.
Correct behavior is to reserve the bigger one between the padding
resource and the actual occupied resource.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18658 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18657 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18656 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
From: Shia Cinnamon <cinnamon.shia@hpe.com>
Signed-off-by: Wang Nickle <nickle.wang@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18655 6f19259b-4bc3-4df7-8a09-765794883524
|
|
memory cache.
Current variable driver already have memory cache to improve performance.
Change the code which read from physical MMIO address to read from memory cache.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18654 6f19259b-4bc3-4df7-8a09-765794883524
|
|
In Shell spec 2.1 the return name of EFI_SHELL_PROTOCOL.GetCurDir() is defined as 'fs0:\current-dir' while in current implementation it's 'fs0:\current-dir\'.
To follow spec the patch removed the redundant '\' char.
Since it has been broken for a long time, some codes may depend on the broken behavior.
After this change 'EFI_SHELL_PROTOCOL.GetCurDir()' and 'UefiShellLib.ShellGetCurrentDir()'
will return a current directory string without tailing '\' (fs0:\current-dir), the value of Shell environment variable 'cwd' will become 'fs0:\current-dir' as well.
This patch has updated all the code in EDKII to make them depend on the new behavior.
Developers should check whether 'GetCurDir()' and 'ShellGetCurrentDir' are used in their source code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18653 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This script can be used to check some expected rules for EDK II
patches. It only works on git formatted patches.
It checks both the commit message and the lines that are added in the
patch diff.
In the commit message it verifies line lengths, signature formats, and
the Contributed-under tag.
In the patch, it checks that line endings are CRLF for all files that
don't have a .sh extension. It verifies that no trailing whitespace is
present and that tab characters are not used.
Patch contributors should use this script prior to submitting their
patches. Package maintainers can also use it to verify incoming
patches.
It can also be run by specifying a git revision list, so actual patch
files are not always required.
For example, to checkout this last 5 patches in your git branch you
can run:
python PatchCheck.py HEAD~5..
Or, a shortcut (like git log):
python PatchCheck.py -5
The --oneline option works similar to git log --oneline.
The --silent option enables silent operation.
The script supports python 2.7 and python 3.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Erik Bjorge <erik.c.bjorge@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18652 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Empty cdroms are not going to connect, avoid waiting for the backend to
switch to state 4, which is never going to happen, and return
error instead from XenPvBlockFrontInitialization(). Detect an
empty cdrom by looking at the "params" node on xenstore, which is set to
"" or "aio:" for empty drives by libxl.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18651 6f19259b-4bc3-4df7-8a09-765794883524
|
|
function called.
The SendForm function can be called nest in it. This function also uses some global variables. So we must save global variable values before it been called again.
Old implementation miss to save some global variables, this patch fixed it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18650 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Python, as distributed, sends its prompts and other interactive output
to stderr, which uses the platforms STDERR device for output. If STDERR output
is not visible, it may appear that Python has hung. Several people have
reported problems on platforms that don't enable STDERR. These include
platforms without a Setup utility and those without Setup options for STDERR.
This patch adds a command-line switch, -#, to Python. If this switch
is present, stderr will be aliased to stdout.
AppPkg/Applications/Python/PyMod-2.7.2/Modules/main.c: New file, modified
version of AppPkg/Applications/Python/Python-2.7.2/Modules/main.c. Add the -#
option which causes stderr to be aliased to stdout. Add a description of this
switch to the Help output.
AppPkg/Applications/Python/PythonCore.inf: Reference main.c from PyMod-2.7.2
instead of from Python-2.7.2 so that the modified version is used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daryl McDaniel <edk2-lists@mc2research.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18649 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add the PiSmmCpuDxeSmm module to the UefiCpuPkg DSC file along
with this modules dependent libraries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18648 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18647 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18646 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
Changes between [PATCH v1] and [PATCH v2]:
1) Swap PTE init order for QEMU compatibility.
Current PTE initialization algorithm works on HW but breaks QEMU
emulator. Update the PTE initialization order to be compatible
with both.
2) Update comment block that describes 32KB SMBASE alignment requirement
to match contents of Intel(R) 64 and IA-32 Architectures Software
Developer's Manual
3) Remove BUGBUG comment and call to ClearSmi() that is not required.
SMI should be cleared by root SMI handler.
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
[pbonzini@redhat.com: InitPaging: prepare PT before filling in PDE]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18645 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add SmmCpuPlatformHookLib library class declaration
Add SmmCpuFeaturesLib library class declaration
Add gEfiSmmCpuServiceProtocolGuid protocol declaration
Build SmmCpuPlatformHookLibNull library instance
Build SmmCpuFeaturesLib library instance
Changes between [PATCH v1] and [PATCH v2]:
1) Use module type specific CpuExceptionHandlerLib in DSC file
instead of Null library instance
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18644 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add CpuHotPlugData.h that defines a data structure that is shared between
modules and is required for to support hot plug CPUs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18643 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add AcpuCpuData.h that defines a data structure that is shared between
modules and is required for ACPI S3 support.
APState field removed between V1 and V2 patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18642 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add SmramSaveStateMap.h file that defines the 32-bit and 64-bit CPU
SMRAM Save State Map.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18641 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add definition of the SMM CPU Service Protocol that is produced by
the PiSmmCpuDxeSmm module.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18640 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add SmmCpuPlatformHookLib that provides platform specific functions
that are used to initialize SMM and process SMIs. A Null instance
of this library is provided that should work for most platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18639 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add SmmCpuFeaturesLib that provides CPU specific functions that are
used to initialize SMM and process SMIs. A functional implementation
of this library class is provided that is based on the
Intel(R) 64 and IA-32 Architectures Software Developer's Manual
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18638 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add declaration of PlatformSecLib library class to DEC file
Add declaration of PcdPeiTemporaryRamStackSize PCD to DEC/UNI file
Add build of PlatformSecLibNull to DSC file
Add build of SecCore to DSC file
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18637 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add SecCore module that uses the PlatformSecLib class for platform
specific actions. The SecCore module also uses a new PCD to
configure the size of the stack used in the SEC phase. If the
stack size PCD is set to 0, the stack is configured to use half
of the available temporary RAM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18636 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add PlatformSecLib class and PlatformSecLibNull instance
that is used by the SecCore. PlatformSecLibNull should
not be used in a platform build. Instead, it should be
used as a template for implementing a platform specific
instance of the PlatformSecLib library class.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18635 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add modules that produce the SMM Communications PPI and
install a SW SMI handler for SMM Communication requests
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18634 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Move CPUID related defines from LocalApic.h to Cpuid.h
Update LocalApicLib instances to include Cpuid.h
Update CpuMpPei module to include Cpuid.h
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18633 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The Quark_EDKII_v1.1.0/IA32FamilyCpuBasePkg/CpuArchDxe
driver applies any MTRR changes to APs, if the
EFI_MP_SERVICES_PROTOCOL is available. We should do the same.
Additionally, the broadcast should occur at MP startup as well,
not only when MTRR settings are changed. The inspiration is
taken from
Quark_EDKII_v1.1.0/IA32FamilyCpuBasePkg/CpuMpDxe/
(see the EarlyMpInit() function and its call sites in
"ProcessorConfig.c").
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18632 6f19259b-4bc3-4df7-8a09-765794883524
|
