Age | Commit message (Collapse) | Author |
|
PcdEmbeddedPerformanceCounterFrequencyInHz and PcdSerialRegisterBase
were not defined.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11748 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The ARM RealView EB (hardware and RTSM) supports the same NOR Flash controller
as the ARM Versatile Express.
Add the implementation of the NorFlashPlatformLib for ArmRealViewEb.
Remove the Firmware Volume Block raw data used to enable environment variables on
ARM RealView EB from the FDF file to use the NOR Flash driver.
Replace the variable service emulation by the version using Firmware Volume Block.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11747 6f19259b-4bc3-4df7-8a09-765794883524
|
|
ArmPlatformPkg
This NOR Flash driver can be reused for other platform (eg: ARM Realview EB).
To make this driver reusable on other platforms the NorFlashPlatformLib library
has been created to abstract the platform specific bits such as the pre-requirements
steps to the initialization and the geometry of the NOR Flash regions.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11746 6f19259b-4bc3-4df7-8a09-765794883524
|
|
gArmPlatformTokenSpaceGuid.PcdSP804FrequencyInMHz
This PCD defines the speed of the SP804 timer. The default value is 1MHz.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11745 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The SP804 drivers must not consider the presence of the SP810 System Controller
on the platform. The SP810 was used to enable the SP804 Dual Timers on ArmVExpress.
It is the role of the Platform specific driver to enable to the SP804 dual timers
if required.
The former SP810 initialization code has moved to ArmPlatformLib for ArmRealViewEb
and ArmVersatileExpress.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11744 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This library makes the interface with the PL011 UART controller.
This library can be linked to different types of driver (Serial Console,
debugger, etc) using PL011 UART controller.
ArmPlatformPkg/PL011SerialPortLib: Use Drivers/PL011Uart
Remove the direct accesses to the PL011 UART controller to use the PL011Uart
library.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11743 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11742 6f19259b-4bc3-4df7-8a09-765794883524
|
|
printing the debugger command lines
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11741 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11740 6f19259b-4bc3-4df7-8a09-765794883524
|
|
These functions set/clear the SCTLR.V bit that controls the location
of the Vector Table.
This commit also forces the SCTLR.V to be clear when the VBAR register
is set.
Note: The original fix has been proposed by Eugene Cohen (HP).
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11739 6f19259b-4bc3-4df7-8a09-765794883524
|
|
There is no requirement to initialize the SMC in secure world.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11738 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The High Vector Table base address is 0xFFFF0000 (was 0xFFF00000).
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11737 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11736 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11735 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11734 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The Exception Vector can be set before installing the CPU DXE driver to add
debugger support at the early stage of the firmware initialization.
If no one has touched the exception vector prior to the CPU DXE then the Vector
might contain non zero data.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11733 6f19259b-4bc3-4df7-8a09-765794883524
|
|
ArmRealViewEb model (RTSM) use the PL390 Generic Interrupt Controller
as interrupt controller.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11732 6f19259b-4bc3-4df7-8a09-765794883524
|
|
gArmRealViewEbPkgTokenSpaceGuid.PcdPeiServicePtrAddr is not used.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11731 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Poll the Serial Port to ensure data are available.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11730 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The UART device type and subtype were inccorect.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11729 6f19259b-4bc3-4df7-8a09-765794883524
|
|
It is a UEFI requirement to update the cursor position infomation for each
string displayed using calls to EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL->OutputString().
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11728 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Make the coding style more compliant with the EDK2 coding convention.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11727 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The MMC controller might be ready for data but not be in a 'ready' state
to send or receive commands.
This fix waits for the MMC controller to be in the correct state.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11726 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The MmcDxe is not ARM architecture specific.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11725 6f19259b-4bc3-4df7-8a09-765794883524
|
|
block size of devices, but you can map a .dmg file no problem at this point.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11724 6f19259b-4bc3-4df7-8a09-765794883524
|
|
it was out of bounds.
Signed-off-by: vanjeff
Reviewed-by: rsun3
Reviewed-by: erictian
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11723 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: niruiyu
Reviewed-by: jljusten
Reviewed-by: hhtian
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11722 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: erictian
Reviewed-by: niruiyu
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11721 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: hhuan13
Reviewed-by: tye
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11720 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Hii, DevicePathToText, and ComponentName drivers from edk2, then with this patch the new Shell will run.
Reviewed by: jcarsey
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11719 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Emulator start code to only pass 2 args in place of 3. The 3rd argument is not needed. Still need a function as the BaseLib functoin does not have the correct calling conventions. Cleanup build script for binary shell case.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11718 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: niruiyu
Reviewed-by: ydong10
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11717 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: niruiyu
Reviewed-by: lgao4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11716 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: niruiyu
Reviewed-by: lgao4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11715 6f19259b-4bc3-4df7-8a09-765794883524
|
|
according to UEFI Spec.
Signed-off-by: qianouyang
Reviewed-by: jjin9
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11714 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: ydong10
Reviewed-by: lgao4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11713 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: lzeng14
Reviewed-by: lgao4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11712 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Fixed NULL pointer reference of BlockIo2.Media in partition code. This resulted
in the interrupt vector table being corrupted in a legacy (CSM) based system.
Signed-off-by: geekboy15a
Reviewed-by: mdkinney
Reviewed-by: niruiyu
Reviewed-by: jljusten
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11711 6f19259b-4bc3-4df7-8a09-765794883524
|
|
calling GraphicConSoleConOutSetPosition().
2. Rename the internal function name EraseCursor() to FlushCursor() to remove the confusion on this function name. And add detailed function description for it.
Signed-off-by: vanjeff
Reviewed-by: rsun3
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11710 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: niruiyu
Reviewed-by: li-elvin
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11709 6f19259b-4bc3-4df7-8a09-765794883524
|
|
BaseTool Branch:
https://edk2-buildtools.svn.sourceforge.net/svnroot/edk2-buildtools/branches/Releases/BaseTools_r2100
Signed-off-by: lgao4
Reviewed-by: gikidy
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11708 6f19259b-4bc3-4df7-8a09-765794883524
|
|
creates boot options for fixed media as well.
Signed-off-by: niruiyu
Reviewed-by: li-elvin
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11707 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: li-elvin
Reviewed-by: jyao1
Reviewed-by: lgao4
Reviewed-by: erictian
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11706 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: li-elvin
Reviewed-by: jyao1
Reviewed-by: lgao4
Reviewed-by: erictian
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11705 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: lgao4
Reviewed-by: rsun3
Reviewed-by: mdkinney
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11704 6f19259b-4bc3-4df7-8a09-765794883524
|
|
TimeDate.c: replace magic number with constant.
Ls.c: use new warning printout string and remove an ASSERT. also replace magic number with constant.
The UNI file: add new warning printout string.
Signed-off-by: jcarsey
Reviewed-by: geekboy15a
Reviewed-by: lgrosenb
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11703 6f19259b-4bc3-4df7-8a09-765794883524
|
|
BaseTool Branch:
https://edk2-buildtools.svn.sourceforge.net/svnroot/edk2-buildtools/branches/Releases/BaseTools_r2100
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11702 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: ydong10
Reviewed-by:
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11701 6f19259b-4bc3-4df7-8a09-765794883524
|
|
into memory lock protection region
Signed-off-by: erictian
Reviewed-by: rsun3
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11700 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: vanjeff
Reviewed-by: rsun3
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11699 6f19259b-4bc3-4df7-8a09-765794883524
|