| Age | Commit message (Collapse) | Author |
|---|
|
AARCH64 systems never require compatibility with legacy ACPI OSes, and
may not have any 32-bit addressable system RAM. To support ACPI on these
systems, we need to be able to relax the 4 GB allocation restriction.
So add a PCD PcdAcpiExposedTableVersions containing a bitmask describing
which ACPI versions are targeted, and wire it up it up to the memory
allocation calls in AcpiTableDxe/AcpiTableProtocol.c. I.e., if ACPI v1.0b
is not among the supported versions, the memory allocations are not limited
to 4 GB, and only table types that carry 64-bit addresses are emitted.
Note that this will inhibit the publishing of any tables that carry only
32-bit addresses, i.e., RSDPv1, RSDTv1 and RSDTv3.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Since Shell supports finding help information from resource section
of application image. We enhance the HelloWorld to add help information
string. After the HelloWorld are loaded in system the help string will
be stored in resource section of the application image.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
UEFI Shell scandalizes the help message in spec level so that a standalone
UEFI shell application can never get "-?" switch, instead the Shell core
(interpreter) detects the "-?" and finds .MAN file for that shell
application in certain spec defined paths, then show the help extracted
from that .MAN file.
But it means distributing a UEFI shell application not only means
distributing a .EFI file but also distributing a .MAN file. If the text
formatted .MAN file is corrupted (edited by user by mistake), or is
missing (deleted by user by mistake), no help will be shown to user.
So this patch enhance the Shell to make it support finding help message
imbedded in resource section of application image.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paulo Alcantara <paulo.alc.cavalcanti@hp.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
The AArch64 DAIF bits are different for reading (mrs) versus writing (msr).
The bitmask definitions assumed they were the same causing incorrect
results when trying to determine the current interrupt state through
GetInterruptState.
The logic for interpreting the DAIF read data using the csel instruction
was also incorrect and is fixed.
Replaced the magic numbers in DisableInterrupts.S and EnableInterrupts.S
with definitions for the DAIF write (daifset/daifclr) IRQ field.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Update the CpuDxe driver to remove an assumption that it is the only
component modifying interrupt state since this can be done through BaseLib
as well. Instead of using a global variable for last interrupt state we
now check the current PSTATE value directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
The AArch64 DAIF bits are different for reading (mrs) versus writing
(msr). The bitmask definitions assumed they were the same causing
incorrect results when trying to determine the current interrupt
state through ArmGetInterruptState.
The logic for interpreting the DAIF read data using the csel instruction
was also incorrect and is fixed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Refine the code in function Var_UpdateDriverOption and Var_UpdateBootOption,
use the existed API(EfiBootManagerInitializeLoadOption and
EfiBootManagerAddLoadOptionVariable) supplied by UefiBootManagerLib
to replace the same logic in the two functions. And remove the useless
code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
when has next line to draw, should not overwrite the BltX
to 0, instead should keep the BltX value that pass into
StringToImage function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
|
|
OpenSSL has released version 1.0.2f with two security fixes
(http://www.openssl.org/news/secadv/20160128.txt) at 28-Jan-2016.
Upgrade the supported OpenSSL version in CryptoPkg/OpensslLib
to catch the latest release 1.0.2f.
(NOTE: The patch file was just re-generated, and no new source
changes was introduced for 1.0.2f enabling)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
|
|
Do NULL pointer check before the pointer is used to avoid dereferenced.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
If XD is supported, then SMM enables it. The non-SMM execution
environment can choose to enable or disable XD, so the state of
XD must be detected in each SMI and be enabled/restored.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
The function CheckFeatureSupported() is used as an EFI_AP_PROCEDURE
in the MP Services Protocol service StartAllAPs(). Any function
used as an EFI_AP_PROCEDURE must use EFIAPI calling convention.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
No ARM support for ACPI is planned under any OS we intend to run under
ArmVirtQemu-ARM, so remove the drivers from the ARM build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
TPM state string update requires HiiHandle which may not be initialized when calling ExtractConfig.
Move this logic to CallBack function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
|
|
The HeaderLog field of the PCIe Extended Capabilities Advanced Error
Reporting structure was incorrectly defined as a 32-bit field. The PCIe
2.1 Base Specification, section 7.10, lists this as 16 bytes, or 4
DWORDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
when no line directive in file, the tool still need to strip the typedef
statement (eg: typedef struct, typedef union ..).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
When the last line in a script file is not an empty line the Shell
will not execute the command in the last line. The patch refine the
logic in function 'ShellFileHandleReturnLine' and fix the issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
|
|
UEFI Spec 2.3.1.D Section 9.3.5.1 says Partitions are numbered
according to their entry in their respective partition table,
starting with 1.
Update the code for MBR partition to follow this rule.
Ref: https://github.com/tianocore/edk2/issues/50
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
|
|
FALSE
UEFI2.6 specification does not recommend to use BIT0
attribute for PropertiesTable, so we change default
value to FALSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
Reviewed-by: "Ard Biesheuvel" <ard.biesheuvel@linaro.org>
Reviewed-by: "Laszlo Ersek" <lersek@redhat.com>
|
|
There are no functional changes in this patch.
The only change is to the XML format, updated using Visual Studio
Edit->Advanced->Format Document.
Different XML Schema editors use different formats for indentation and
line breaks. Visual Studio 2013 uses a two space indentation for content.
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Larry Hauch <larry.hauch@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
The Juno .dsc and .fdf files were recently deleted (currently held
in OpenPlatformPkg), but a spurious Makefile for building using it
was left in place. Drop the Makefile to complete the cleanup.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Harking back to the earliest days of software development for AArch64,
this piece of code abstracted away "early setup stuff" when the
software model came out of reset.
However, it is unmaintained and has been superseded by ARM Trusted
Firmware. So drop it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
The legacy 32-bit SMBIOS entry point has little use on AARCH64 systems,
since many such systems have no 32-bit addressable physical RAM, and so
OSes that implement SMBIOS will have to be able to deal with the 64-bit
entry point anyway.
Given that the OS will map main memory in 1 GB chunks if it can, and that
punching a page sized hole (e.g., for SMBIOS data) into it will result in
the whole 1 GB chunk being mapped using 2 MB and 4 KB blocks instead, it
is important to group memory reservations from the OS as much as we can,
and allocating below 4 GB for no good reason interferes with that.
This is especially important under virtualization, considering that each
*level* of lookup at stage 1 (the guest virtual page table) will result in
a full page table walk at stage 2 (the guest PA to host PA mapping).
So expose only the 64-bit entry point when the SMBIOS tables adhere to
version 3.0 or later.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
The pointer 'FileInterface->Buffer' returned from 'AllocateZeroPool' in function
'CreateFileInterfaceMem' may be NULL and will be dereferenced at the following code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
This patch is used to replace the internal function with
the exposed one defined in NetLib.h.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
This patch is used to define a general function to create
DNS QName.
QName is a domain name represented as a sequence
of labels, where each label consists of a length octet
followed by that number of octets. The domain name terminates
with the zero length octet for the null label of the root.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
The way the first use of the "_maxMode" variable is commented out (i.e.,
together with the enclosing "if" statement) in GetOptimum() triggers the
"misleading-indentation" warning that is new in gcc-6.0, for the block of
code that originally depended on the "if" statement. Gcc believes
(mistakenly) that the programmer believes (mistakenly) that the block
depends on (repIndex == 0) higher up.
Restore the if statement, with a controlling expression that comprises the
constant 1 and "_maxMode" commented out.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reported-by: Cole Robinson <crobinso@redhat.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Build-tested-by: Cole Robinson <crobinso@redhat.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1307439
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
The Help information provided by VolInfo does not follow the EDK II Tools
Design doc, so this patch update the help text and add the generic
options: -d, -v, -q, -s.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
when build.py was failing to build packages but was not providing any
error message except for “Failed to start command.” this patch provide
the error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
current GCC build report error: 'for' loop initial declarations are only
allowed in C99 or C11 mode, the patch fix this failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Replace gBS->LocateHandle with gBS->LocateHandleBuffer
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
|
|
Replace gBS->LocateHandle with gBS->LocateHandleBuffer
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
|
|
The error return is triggered by one of two conditions:
1. rrecp is NULL (calloc failed)
2. strdup(dname) returns NULL
Previously, the function just returned NULL. This patch adds a call to
free rrecp before returning NULL. Since the free() function will properly
do nothing when called with a NULL parameter, it is not necessary to
separate the two tests into separate if clauses.
Reported-by: Colin King <colin.king@canonical.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daryl McDaniel <edk2-lists@mc2research.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
string termination
This patch revises multiple diagnostic messages to use correct
datatypes. It also checks that a symbol name that is about to be used
in a diagnostic message is terminated by a null character within the
contents of the string table section so that the print routine does
not read past the end of the string table section contents when
reading the symbol name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
This patch expands the error message that is output when GenFw
encounters a bad symbol definition or an unsupported symbol type. It
displays the symbol name, the symbol address, and a message that
describes both possibilities (bad symbol definition or unsupported
symbol type). It also provides two examples of unsupported symbol
types.
Furthermore, this patch revises the conditional for detecting bad
symbol definitions to eliminate a redundant test (a Sym->st_shndx
value of SHN_ABS should certainly be greater than mEhdr->e_shnum) and
to change another test from 'Sym->st_shndx > mEhdr->e_shnum' to
'Sym->st_shndx >= mEhdr->e_shnum' for consistency with the test in
GetShdrByIndex.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
This patch revises GetPhdrByIndex and GetShdrByIndex to cause GenFw to
exit with an error message when a section header lookup fails. The
current behavior of those functions in such circumstances is to return
NULL, which can cause GenFw to subsequently fault when it attempts to
dereference the null pointer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
|
|
MemoryAttributeTable
|
|
This patch fixes a bug in SNP driver that the Cdb.StatCode should be check with
PXE_STATCODE_SUCCESS instead of EFI_SUCCESS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
SNP driver will print the UNDI returned StatFlags:StatCode with DEBUG macro,
while in some please it uses the reverse order (StatCode:StatFlags). This patch
is to make the print info consistent, that StatFlags always come first.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
Update DxeCore INF for MemoryAttributesTable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
|
|
Call CoreInitializeMemoryAttributesTable() in DXE Entrypoint.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
|
|
Add CoreInitializeMemoryAttributesTable() to DXE Core
header file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
|
|
MemoryAttributesTable generation need information in
PropertiesTable.
In memory attributes table generation path,
PropertiesTable need record original memory map and do
not merge the new memory map entry cross original
memory map boundary.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
|
|
Add MemoryAttributesTable generation in DxeCore.
We leverage the information collected by original
PropertiesTable, and publish runtime code/data to
another standalone table. So that this is a
compatible solution to report more PE Code/Data
information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
|
|
Add UEFI2.6 MemoryAttributesTable GUID definition.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
|
|
Add UEFI2.6 MemoryAttributes Table definition header
file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
|
|
Juno is now managed in OpenPlatformPkg, including the ACPI
tables - so delete this unmaintained copy.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
|
