path: root/MdeModulePkg/Universal/Network/UefiPxeBcDxe/PxeBcSupport.c

/** @file
  Support routines for PxeBc.

Copyright (c) 2007 - 2010, Intel Corporation.<BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/


#include "PxeBcImpl.h"


/**
  This function returns SMBIOS string given the string number.

  @param  Smbios              Pointer to SMBIOS structure
  @param  StringNumber        String number to return. 0 is used to skip all
                              strings and  point to the next SMBIOS structure.

  @return Pointer to string, or pointer to next SMBIOS strcuture if StringNumber == 0

**/
CHAR8 *
GetSmbiosString (
  IN  SMBIOS_STRUCTURE_POINTER  *Smbios,
  IN  UINT16                    StringNumber
  )
{
  UINT16  Index;
  CHAR8   *String;

  //
  // Skip over formatted section
  //
  String = (CHAR8 *) (Smbios->Raw + Smbios->Hdr->Length);

  //
  // Look through unformated section
  //
  for (Index = 1; Index <= StringNumber || StringNumber == 0; Index++) {
    if (StringNumber == Index) {
      return String;
    }
    //
    // Skip string
    //
    for (; *String != 0; String++)
      ;
    String++;

    if (*String == 0) {
      //
      // If double NULL then we are done.
      //  Return pointer to next structure in Smbios.
      //  if you pass in a 0 you will always get here
      //
      Smbios->Raw = (UINT8 *)++String;
      return NULL;
    }
  }

  return NULL;
}


/**
  This function gets system guid and serial number from the smbios table.

  @param  SystemGuid          The pointer of returned system guid.
  @param  SystemSerialNumber  The pointer of returned system serial number.

  @retval EFI_SUCCESS         Successfully get the system guid and system serial
                              number.
  @retval EFI_NOT_FOUND       Not find the SMBIOS table.

**/
EFI_STATUS
GetSmbiosSystemGuidAndSerialNumber (
  IN  EFI_GUID  *SystemGuid,
  OUT CHAR8     **SystemSerialNumber
  )
{
  EFI_STATUS                Status;
  SMBIOS_TABLE_ENTRY_POINT  *SmbiosTable;
  SMBIOS_STRUCTURE_POINTER  Smbios;
  SMBIOS_STRUCTURE_POINTER  SmbiosEnd;
  UINT16                    Index;

  Status = EfiGetSystemConfigurationTable (&gEfiSmbiosTableGuid, (VOID **) &SmbiosTable);

  if (EFI_ERROR (Status)) {
    return EFI_NOT_FOUND;
  }
  ASSERT (SmbiosTable != NULL);

  Smbios.Hdr    = (SMBIOS_STRUCTURE *) (UINTN) SmbiosTable->TableAddress;
  SmbiosEnd.Raw = (UINT8 *) (UINTN) (SmbiosTable->TableAddress + SmbiosTable->TableLength);

  for (Index = 0; Index < SmbiosTable->TableLength; Index++) {
    if (Smbios.Hdr->Type == 1) {
      if (Smbios.Hdr->Length < 0x19) {
        //
        // Older version did not support Guid and Serial number
        //
        continue;
      }
      //
      // SMBIOS tables are byte packed so we need to do a byte copy to
      // prevend alignment faults on Itanium-based platform.
      //
      CopyMem (SystemGuid, &Smbios.Type1->Uuid, sizeof (EFI_GUID));
      *SystemSerialNumber = GetSmbiosString (&Smbios, Smbios.Type1->SerialNumber);

      return EFI_SUCCESS;
    }
    //
    // Make Smbios point to the next record
    //
    GetSmbiosString (&Smbios, 0);

    if (Smbios.Raw >= SmbiosEnd.Raw) {
      //
      // SMBIOS 2.1 incorrectly stated the length of SmbiosTable as 0x1e.
      // given this we must double check against the length of the structure.
      //
      return EFI_SUCCESS;
    }
  }

  return EFI_SUCCESS;
}


/**
  The common notify function associated with various PxeBc events.

  @param  Event     The event signaled.
  @param  Context   The context.

**/
VOID
EFIAPI
PxeBcCommonNotify (
  IN EFI_EVENT           Event,
  IN VOID                *Context
  )
{
  *((BOOLEAN *) Context) = TRUE;
}


/**
  This function initialize(or configure) the Udp4Write instance.

  @param  Udp4       Pointer to the EFI_UDP4_PROTOCOL instance.
  @param  StationIp  Pointer to the station ip address.
  @param  SubnetMask Pointer to the subnetmask of the station ip address.
  @param  Gateway    Pointer to the gateway ip address.
  @param  SrcPort    Pointer to the srouce port of the station.

  @retval EFI_SUCCESS           The configuration settings were set, changed, or reset successfully.
  @retval EFI_NO_MAPPING        When using a default address, configuration (DHCP, BOOTP,
                                RARP, etc.) is not finished yet.
  @retval EFI_INVALID_PARAMETER One or more following conditions are TRUE:
  @retval EFI_ALREADY_STARTED   The EFI UDPv4 Protocol instance is already started/configured
                                and must be stopped/reset before it can be reconfigured.
  @retval EFI_ACCESS_DENIED     UdpConfigData. AllowDuplicatePort is FALSE
                                and UdpConfigData.StationPort is already used by
                                other instance.
  @retval EFI_OUT_OF_RESOURCES  The EFI UDPv4 Protocol driver cannot allocate memory for this
                                EFI UDPv4 Protocol instance.
  @retval EFI_DEVICE_ERROR      An unexpected network or system error occurred and this instance
                                was not opened.
  @retval Others                Please examine the function Udp4->Routes(Udp4, FALSE, &mZeroIp4Addr, &mZeroIp4Addr, Gateway) returns.

**/
EFI_STATUS
PxeBcConfigureUdpWriteInstance (
  IN EFI_UDP4_PROTOCOL  *Udp4,
  IN EFI_IPv4_ADDRESS   *StationIp,
  IN EFI_IPv4_ADDRESS   *SubnetMask,
  IN EFI_IPv4_ADDRESS   *Gateway,
  IN OUT UINT16         *SrcPort
  )
{
  EFI_UDP4_CONFIG_DATA  Udp4CfgData;
  EFI_STATUS            Status;

  ZeroMem (&Udp4CfgData, sizeof (Udp4CfgData));

  Udp4CfgData.ReceiveTimeout = PXEBC_DEFAULT_LIFETIME;
  Udp4CfgData.TypeOfService  = DEFAULT_ToS;
  Udp4CfgData.TimeToLive     = DEFAULT_TTL;
  Udp4CfgData.AllowDuplicatePort = TRUE;

  CopyMem (&Udp4CfgData.StationAddress, StationIp, sizeof (*StationIp));
  CopyMem (&Udp4CfgData.SubnetMask, SubnetMask, sizeof (*SubnetMask));

  Udp4CfgData.StationPort    = *SrcPort;

  //
  // Reset the instance.
  //
  Udp4->Configure (Udp4, NULL);

  Status = Udp4->Configure (Udp4, &Udp4CfgData);
  if (!EFI_ERROR (Status) && (Gateway->Addr[0] != 0)) {
    //
    // basic configuration OK, need to add the default route entry
    //
    Status = Udp4->Routes (Udp4, FALSE, &mZeroIp4Addr, &mZeroIp4Addr, Gateway);
    if (EFI_ERROR (Status)) {
      //
      // roll back
      //
      Udp4->Configure (Udp4, NULL);
    }
  }

  if (!EFI_ERROR (Status) && (*SrcPort == 0)) {
    Udp4->GetModeData (Udp4, &Udp4CfgData, NULL, NULL, NULL);
    *SrcPort = Udp4CfgData.StationPort;
  }

  return Status;
}


/**
  Convert number to ASCII value.

  @param  Number              Numeric value to convert to decimal ASCII value.
  @param  Buffer              Buffer to place ASCII version of the Number.
  @param  Length              Length of Buffer.

**/
VOID
CvtNum (
  IN UINTN  Number,
  IN UINT8  *Buffer,
  IN UINTN   Length
  )
{
  UINTN Remainder;

  while (Length > 0) {
    Remainder = Number % 10;
    Number /= 10;
    Length--;
    Buffer[Length] = (UINT8) ('0' + Remainder);
  }
}


/**
  Convert unsigned int number to decimal number.

  @param  Number   The unsigned int number will be converted.
  @param  Buffer   Pointer to the buffer to store the decimal number after transform.

  @return the length of the number after transform.

**/
UINTN
UtoA10 (
  IN UINTN Number,
  IN CHAR8 *Buffer
  )
{
  UINTN Index;
  CHAR8 TempStr[64];

  Index           = 63;
  TempStr[Index]  = 0;

  do {
    Index--;
    TempStr[Index]  = (CHAR8) ('0' + (Number % 10));
    Number          = Number / 10;
  } while (Number != 0);

  AsciiStrCpy (Buffer, &TempStr[Index]);

  return AsciiStrLen (Buffer);
}


/**
  Convert ASCII numeric string to a UINTN value.

  @param  Buffer  Pointer to the 8-byte unsigned int value.

  @return UINTN value of the ASCII string.

**/
UINT64
AtoU64 (
  IN UINT8 *Buffer
  )
{
  UINT64  Value;
  UINT8   Character;

  Value = 0;
  while ((Character = *Buffer++) != '\0') {
    Value = MultU64x32 (Value, 10) + (Character - '0');
  }

  return Value;
}