path: root/Platform/ARM/VExpressPkg/Library/HdLcdArmVExpressLib/HdLcdArmVExpress.c

/** @file

  Copyright (c) 2012-2018, ARM Ltd. All rights reserved.

  This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include <PiDxe.h>

#include <Library/ArmPlatformSysConfigLib.h>
#include <Library/IoLib.h>
#include <Library/PcdLib.h>
#include <Library/DebugLib.h>
#include <Library/DxeServicesTableLib.h>
#include <Library/LcdPlatformLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>

#include <Protocol/EdidDiscovered.h>
#include <Protocol/EdidActive.h>

#include <ArmPlatform.h>

typedef struct {
  UINT32                     Mode;
  UINT32                     HorizontalResolution;
  UINT32                     VerticalResolution;
  LCD_BPP                    Bpp;
  UINT32                     OscFreq;

  // These are used by HDLCD
  UINT32                     HSync;
  UINT32                     HBackPorch;
  UINT32                     HFrontPorch;
  UINT32                     VSync;
  UINT32                     VBackPorch;
  UINT32                     VFrontPorch;
} LCD_RESOLUTION;

/** The display modes supported by the platform.
**/
LCD_RESOLUTION mResolutions[] = {
  { // Mode 0 : VGA : 640 x 480 x 24 bpp
    VGA, VGA_H_RES_PIXELS, VGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24,
    VGA_OSC_FREQUENCY,
    VGA_H_SYNC, VGA_H_BACK_PORCH, VGA_H_FRONT_PORCH,
    VGA_V_SYNC, VGA_V_BACK_PORCH, VGA_V_FRONT_PORCH
  },
  { // Mode 1 : SVGA : 800 x 600 x 24 bpp
    SVGA, SVGA_H_RES_PIXELS, SVGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24,
    SVGA_OSC_FREQUENCY,
    SVGA_H_SYNC, SVGA_H_BACK_PORCH, SVGA_H_FRONT_PORCH,
    SVGA_V_SYNC, SVGA_V_BACK_PORCH, SVGA_V_FRONT_PORCH
  },
  { // Mode 2 : XGA : 1024 x 768 x 24 bpp
    XGA, XGA_H_RES_PIXELS, XGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24,
    XGA_OSC_FREQUENCY,
    XGA_H_SYNC, XGA_H_BACK_PORCH, XGA_H_FRONT_PORCH,
    XGA_V_SYNC, XGA_V_BACK_PORCH, XGA_V_FRONT_PORCH
  },
  { // Mode 3 : SXGA : 1280 x 1024 x 24 bpp
    SXGA, SXGA_H_RES_PIXELS, SXGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24,
    (SXGA_OSC_FREQUENCY/2),
    SXGA_H_SYNC, SXGA_H_BACK_PORCH, SXGA_H_FRONT_PORCH,
    SXGA_V_SYNC, SXGA_V_BACK_PORCH, SXGA_V_FRONT_PORCH
  },
  { // Mode 4 : UXGA : 1600 x 1200 x 24 bpp
    UXGA, UXGA_H_RES_PIXELS, UXGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24,
    (UXGA_OSC_FREQUENCY/2),
    UXGA_H_SYNC, UXGA_H_BACK_PORCH, UXGA_H_FRONT_PORCH,
    UXGA_V_SYNC, UXGA_V_BACK_PORCH, UXGA_V_FRONT_PORCH
  },
  { // Mode 5 : HD : 1920 x 1080 x 24 bpp
    HD, HD_H_RES_PIXELS, HD_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24,
    (HD_OSC_FREQUENCY/2),
    HD_H_SYNC, HD_H_BACK_PORCH, HD_H_FRONT_PORCH,
    HD_V_SYNC, HD_V_BACK_PORCH, HD_V_FRONT_PORCH
  }
};

EFI_EDID_DISCOVERED_PROTOCOL  mEdidDiscovered = {
  0,
  NULL
};

EFI_EDID_ACTIVE_PROTOCOL      mEdidActive = {
  0,
  NULL
};

/** HDLCD platform specific initialization function.

  @param[in] Handle              Handle to the LCD device instance.

  @retval EFI_SUCCESS            Plaform library initialized successfully.
  @retval !(EFI_SUCCESS)         Other errors.
**/
EFI_STATUS
LcdPlatformInitializeDisplay (
  IN EFI_HANDLE   Handle
  )
{
  EFI_STATUS  Status;

  // Set the FPGA multiplexer to select the video output from the
  // motherboard or the daughterboard
  Status = ArmPlatformSysConfigSet (
             SYS_CFG_MUXFPGA,
             ARM_VE_DAUGHTERBOARD_1_SITE
             );
  if (EFI_ERROR (Status)) {
    return Status;
  }

  // Install the EDID Protocols
  Status = gBS->InstallMultipleProtocolInterfaces (
                  &Handle,
                  &gEfiEdidDiscoveredProtocolGuid,
                  &mEdidDiscovered,
                  &gEfiEdidActiveProtocolGuid,
                  &mEdidActive,
                  NULL
                  );

  return Status;
}

/** Allocate VRAM memory in DRAM for the framebuffer
  (unless it is reserved already).

  The allocated address can be used to set the framebuffer.

  @param[out] VramBaseAddress     A pointer to the framebuffer address.
  @param[out] VramSize            A pointer to the size of the framebuffer
                                  in bytes

  @retval EFI_SUCCESS             Framebuffer memory allocated successfully.
  @retval !(EFI_SUCCESS)          Other errors.
**/
EFI_STATUS
LcdPlatformGetVram (
  OUT EFI_PHYSICAL_ADDRESS*  VramBaseAddress,
  OUT UINTN*                 VramSize
  )
{
  EFI_STATUS              Status;
  EFI_ALLOCATE_TYPE       AllocationType;

  ASSERT (VramBaseAddress != NULL);
  ASSERT (VramSize != NULL);

  // Set the vram size
  *VramSize = LCD_VRAM_SIZE;

  *VramBaseAddress = (EFI_PHYSICAL_ADDRESS)LCD_VRAM_CORE_TILE_BASE;

  // Allocate the VRAM from the DRAM so that nobody else uses it.
  if (*VramBaseAddress == 0) {
    AllocationType = AllocateAnyPages;
  } else {
    AllocationType = AllocateAddress;
  }
  Status = gBS->AllocatePages (
                  AllocationType,
                  EfiBootServicesData,
                  EFI_SIZE_TO_PAGES (((UINTN)LCD_VRAM_SIZE)),
                  VramBaseAddress
                  );
  if (EFI_ERROR (Status)) {
    ASSERT_EFI_ERROR (Status);
    return Status;
  }

  // Mark the VRAM as write-combining.
  // The VRAM is inside the DRAM, which is cacheable.
  Status = gDS->SetMemorySpaceAttributes (
                  *VramBaseAddress,
                  *VramSize,
                  EFI_MEMORY_WC
                  );
  if (EFI_ERROR (Status)) {
    ASSERT_EFI_ERROR (Status);
    gBS->FreePages (*VramBaseAddress, EFI_SIZE_TO_PAGES (*VramSize));
    return Status;
  }

  return EFI_SUCCESS;
}

/** Return total number of modes supported.

  Note: Valid mode numbers are 0 to MaxMode - 1
  See Section 12.9 of the UEFI Specification 2.7

  @retval UINT32             Mode Number.
**/
UINT32
LcdPlatformGetMaxMode (VOID)
{
  // The following line will report correctly the total number of graphics modes
  // that could be supported by the graphics driver
  return (sizeof (mResolutions) / sizeof (LCD_RESOLUTION));
}

/** Set the requested display mode.

  @param[in] ModeNumber             Mode Number.

  @retval EFI_SUCCESS               Mode set successfully.
  @retval EFI_INVALID_PARAMETER     Requested mode not found.
  @retval !(EFI_SUCCESS)            Other errors.
**/
EFI_STATUS
LcdPlatformSetMode (
  IN UINT32                         ModeNumber
  )
{
  EFI_STATUS            Status;

  if (ModeNumber >= LcdPlatformGetMaxMode ()) {
    ASSERT (FALSE);
    return EFI_INVALID_PARAMETER;
  }

  // Set the video mode oscillator
  do {
    Status = ArmPlatformSysConfigSetDevice (
               SYS_CFG_OSC_SITE1,
               PcdGet32 (PcdHdLcdVideoModeOscId),
               mResolutions[ModeNumber].OscFreq
               );
  } while (Status == EFI_TIMEOUT);
  if (EFI_ERROR (Status)) {
    ASSERT_EFI_ERROR (Status);
    return Status;
  }

  // Set the DVI into the new mode
  do {
    Status = ArmPlatformSysConfigSet (
               SYS_CFG_DVIMODE,
               mResolutions[ModeNumber].Mode
               );
  } while (Status == EFI_TIMEOUT);
  if (EFI_ERROR (Status)) {
    ASSERT_EFI_ERROR (Status);
    return Status;
  }

  // Set the multiplexer
  Status = ArmPlatformSysConfigSet (
             SYS_CFG_MUXFPGA,
             ARM_VE_DAUGHTERBOARD_1_SITE
             );
  ASSERT_EFI_ERROR (Status);

  return Status;
}

/** Return information for the requested mode number.

  @param[in]  ModeNumber          Mode Number.

  @param[out] Info                Pointer for returned mode information
                                  (on success).

  @retval EFI_SUCCESS             Mode information for the requested mode
                                  returned successfully.
  @retval EFI_INVALID_PARAMETER   Requested mode not found.
**/
EFI_STATUS
LcdPlatformQueryMode (
  IN  UINT32                                ModeNumber,
  OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION  *Info
  )
{
  ASSERT (Info != NULL);

  if (ModeNumber >= LcdPlatformGetMaxMode ()) {
    ASSERT (FALSE);
    return EFI_INVALID_PARAMETER;
  }

  Info->Version = 0;
  Info->HorizontalResolution = mResolutions[ModeNumber].HorizontalResolution;
  Info->VerticalResolution = mResolutions[ModeNumber].VerticalResolution;
  Info->PixelsPerScanLine = mResolutions[ModeNumber].HorizontalResolution;

  switch (mResolutions[ModeNumber].Bpp) {
  case LCD_BITS_PER_PIXEL_24:
    Info->PixelFormat                   = PixelRedGreenBlueReserved8BitPerColor;
    Info->PixelInformation.RedMask      = LCD_24BPP_RED_MASK;
    Info->PixelInformation.GreenMask    = LCD_24BPP_GREEN_MASK;
    Info->PixelInformation.BlueMask     = LCD_24BPP_BLUE_MASK;
    Info->PixelInformation.ReservedMask = LCD_24BPP_RESERVED_MASK;
    break;

  case LCD_BITS_PER_PIXEL_16_555:
  case LCD_BITS_PER_PIXEL_16_565:
  case LCD_BITS_PER_PIXEL_12_444:
  case LCD_BITS_PER_PIXEL_8:
  case LCD_BITS_PER_PIXEL_4:
  case LCD_BITS_PER_PIXEL_2:
  case LCD_BITS_PER_PIXEL_1:
  default:
    // These are not supported
    ASSERT (FALSE);
    break;
  }

  return EFI_SUCCESS;
}

/** Return display timing information for the requested mode number.

  @param[in]  ModeNumber          Mode Number.

  @param[out] HRes                Pointer to horizontal resolution.
  @param[out] HSync               Pointer to horizontal sync width.
  @param[out] HBackPorch          Pointer to horizontal back porch.
  @param[out] HFrontPorch         Pointer to horizontal front porch.
  @param[out] VRes                Pointer to vertical resolution.
  @param[out] VSync               Pointer to vertical sync width.
  @param[out] VBackPorch          Pointer to vertical back porch.
  @param[out] VFrontPorch         Pointer to vertical front porch.

  @retval EFI_SUCCESS             Display timing information for the requested
                                  mode returned successfully.
  @retval EFI_INVALID_PARAMETER   Requested mode not found.
**/
EFI_STATUS
LcdPlatformGetTimings (
  IN  UINT32                              ModeNumber,
  OUT UINT32*                             HRes,
  OUT UINT32*                             HSync,
  OUT UINT32*                             HBackPorch,
  OUT UINT32*                             HFrontPorch,
  OUT UINT32*                             VRes,
  OUT UINT32*                             VSync,
  OUT UINT32*                             VBackPorch,
  OUT UINT32*                             VFrontPorch
  )
{
  // One of the pointers is NULL
  ASSERT (HRes != NULL);
  ASSERT (HSync != NULL);
  ASSERT (HBackPorch != NULL);
  ASSERT (HFrontPorch != NULL);
  ASSERT (VRes != NULL);
  ASSERT (VSync != NULL);
  ASSERT (VBackPorch != NULL);
  ASSERT (VFrontPorch != NULL);

  if (ModeNumber >= LcdPlatformGetMaxMode ()) {
    ASSERT (FALSE);
    return EFI_INVALID_PARAMETER;
  }

  *HRes           = mResolutions[ModeNumber].HorizontalResolution;
  *HSync          = mResolutions[ModeNumber].HSync;
  *HBackPorch     = mResolutions[ModeNumber].HBackPorch;
  *HFrontPorch    = mResolutions[ModeNumber].HFrontPorch;
  *VRes           = mResolutions[ModeNumber].VerticalResolution;
  *VSync          = mResolutions[ModeNumber].VSync;
  *VBackPorch     = mResolutions[ModeNumber].VBackPorch;
  *VFrontPorch    = mResolutions[ModeNumber].VFrontPorch;

  return EFI_SUCCESS;
}

/** Return bits per pixel information for a mode number.

  @param[in]  ModeNumber          Mode Number.

  @param[out] Bpp                 Pointer to bits per pixel information.

  @retval EFI_SUCCESS             Bits per pixel information for the requested
                                  mode returned successfully.
  @retval EFI_INVALID_PARAMETER   Requested mode not found.
**/
EFI_STATUS
LcdPlatformGetBpp (
  IN  UINT32                              ModeNumber,
  OUT LCD_BPP  *                          Bpp
  )
{
  if (ModeNumber >= LcdPlatformGetMaxMode ()) {
    ASSERT (FALSE);
    return EFI_INVALID_PARAMETER;
  }

  *Bpp = mResolutions[ModeNumber].Bpp;

  return EFI_SUCCESS;
}