summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAndreas Hansson <andreas.hansson@arm.com>2014-03-23 11:12:01 -0400
committerAndreas Hansson <andreas.hansson@arm.com>2014-03-23 11:12:01 -0400
commit6557741311f28f718cc33f9abde36d7e51f3585c (patch)
treef5d77bce64a777801d40ef9901cff9b1c17c69c8
parent7d883df7e58b6e61ed93717f6fde251086d50153 (diff)
downloadgem5-6557741311f28f718cc33f9abde36d7e51f3585c.tar.xz
mem: Make DRAM write queue draining more aggressive
This patch changes the triggering condition for the write draining such that we grab the opportunity to issue writes if there are no reads waiting (as opposed to waiting for the writes to reach the high threshold). As a result, we potentially drain some of the writes in read idle periods (if any). A low threshold is added to be able to control how many write bursts are kept in the memory controller queue (acting as on-chip storage). The high and low thresholds are updated to sensible values for a 32/64 size write buffer. Note that the thresholds should be adjusted along with the queue sizes. This patch also adds some basic initialisation sanity checks and moves part of the initialisation to the constructor.
-rw-r--r--src/mem/SimpleDRAM.py20
-rw-r--r--src/mem/simple_dram.cc86
-rw-r--r--src/mem/simple_dram.hh13
3 files changed, 56 insertions, 63 deletions
diff --git a/src/mem/SimpleDRAM.py b/src/mem/SimpleDRAM.py
index 7b8e506ac..1f44888e7 100644
--- a/src/mem/SimpleDRAM.py
+++ b/src/mem/SimpleDRAM.py
@@ -73,15 +73,17 @@ class SimpleDRAM(AbstractMemory):
write_buffer_size = Param.Unsigned(32, "Number of write queue entries")
read_buffer_size = Param.Unsigned(32, "Number of read queue entries")
- # threshold in percent for when to trigger writes and start
- # emptying the write buffer as it starts to get full
- write_high_thresh_perc = Param.Percent(70, "Threshold to trigger writes")
-
- # threshold in percentage for when to stop writes if the read
- # queue has an entry. An optimisaton to give reads priority if
- # sufficient number of writes are scheduled and write queue has
- # sufficient number of free entries
- write_low_thresh_perc = Param.Percent(0, "Threshold to stop writes")
+ # threshold in percent for when to forcefully trigger writes and
+ # start emptying the write buffer
+ write_high_thresh_perc = Param.Percent(85, "Threshold to force writes")
+
+ # threshold in percentage for when to start writes if the read
+ # queue is empty
+ write_low_thresh_perc = Param.Percent(50, "Threshold to start writes")
+
+ # minimum write bursts to schedule before switching back to reads
+ min_writes_per_switch = Param.Unsigned(16, "Minimum write bursts before "
+ "switching to reads")
# scheduler, address map and page policy
mem_sched_policy = Param.MemSched('frfcfs', "Memory scheduling policy")
diff --git a/src/mem/simple_dram.cc b/src/mem/simple_dram.cc
index 415f3dfcf..9a0008569 100644
--- a/src/mem/simple_dram.cc
+++ b/src/mem/simple_dram.cc
@@ -63,12 +63,14 @@ SimpleDRAM::SimpleDRAM(const SimpleDRAMParams* p) :
devicesPerRank(p->devices_per_rank),
burstSize((devicesPerRank * burstLength * deviceBusWidth) / 8),
rowBufferSize(devicesPerRank * deviceRowBufferSize),
+ columnsPerRowBuffer(rowBufferSize / burstSize),
ranksPerChannel(p->ranks_per_channel),
banksPerRank(p->banks_per_rank), channels(p->channels), rowsPerBank(0),
readBufferSize(p->read_buffer_size),
writeBufferSize(p->write_buffer_size),
- writeHighThresholdPerc(p->write_high_thresh_perc),
- writeLowThresholdPerc(p->write_low_thresh_perc),
+ writeHighThreshold(writeBufferSize * p->write_high_thresh_perc / 100.0),
+ writeLowThreshold(writeBufferSize * p->write_low_thresh_perc / 100.0),
+ minWritesPerSwitch(p->min_writes_per_switch), writesThisTime(0),
tWTR(p->tWTR), tBURST(p->tBURST),
tRCD(p->tRCD), tCL(p->tCL), tRP(p->tRP), tRAS(p->tRAS),
tRFC(p->tRFC), tREFI(p->tREFI), tRRD(p->tRRD),
@@ -79,8 +81,7 @@ SimpleDRAM::SimpleDRAM(const SimpleDRAMParams* p) :
backendLatency(p->static_backend_latency),
busBusyUntil(0), writeStartTime(0),
prevArrival(0), numReqs(0),
- numWritesThisTime(0), newTime(0),
- startTickPrechargeAll(0), numBanksActive(0)
+ newTime(0), startTickPrechargeAll(0), numBanksActive(0)
{
// create the bank states based on the dimensions of the ranks and
// banks
@@ -91,24 +92,11 @@ SimpleDRAM::SimpleDRAM(const SimpleDRAMParams* p) :
actTicks[c].resize(activationLimit, 0);
}
- // round the write thresholds percent to a whole number of entries
- // in the buffer.
- writeHighThreshold = writeBufferSize * writeHighThresholdPerc / 100.0;
- writeLowThreshold = writeBufferSize * writeLowThresholdPerc / 100.0;
-}
-
-void
-SimpleDRAM::init()
-{
- if (!port.isConnected()) {
- fatal("SimpleDRAM %s is unconnected!\n", name());
- } else {
- port.sendRangeChange();
- }
-
- // we could deal with plenty options here, but for now do a quick
- // sanity check
- DPRINTF(DRAM, "Burst size %d bytes\n", burstSize);
+ // perform a basic check of the write thresholds
+ if (p->write_low_thresh_perc >= p->write_high_thresh_perc)
+ fatal("Write buffer low threshold %d must be smaller than the "
+ "high threshold %d\n", p->write_low_thresh_perc,
+ p->write_high_thresh_perc);
// determine the rows per bank by looking at the total capacity
uint64_t capacity = ULL(1) << ceilLog2(AbstractMemory::size());
@@ -116,8 +104,6 @@ SimpleDRAM::init()
DPRINTF(DRAM, "Memory capacity %lld (%lld) bytes\n", capacity,
AbstractMemory::size());
- columnsPerRowBuffer = rowBufferSize / burstSize;
-
DPRINTF(DRAM, "Row buffer size %d bytes with %d columns per row buffer\n",
rowBufferSize, columnsPerRowBuffer);
@@ -147,6 +133,16 @@ SimpleDRAM::init()
}
void
+SimpleDRAM::init()
+{
+ if (!port.isConnected()) {
+ fatal("SimpleDRAM %s is unconnected!\n", name());
+ } else {
+ port.sendRangeChange();
+ }
+}
+
+void
SimpleDRAM::startup()
{
// print the configuration of the controller
@@ -397,29 +393,26 @@ SimpleDRAM::processWriteEvent()
writeQueue.pop_front();
delete dram_pkt;
- numWritesThisTime++;
- DPRINTF(DRAM, "Completed %d writes, bus busy for %lld ticks,"\
- "banks busy for %lld ticks\n", numWritesThisTime,
- busBusyUntil - temp1, maxBankFreeAt() - temp2);
+ ++writesThisTime;
+
+ DPRINTF(DRAM, "Writing, bus busy for %lld ticks, banks busy "
+ "for %lld ticks\n", busBusyUntil - temp1, maxBankFreeAt() - temp2);
// Update stats
avgWrQLen = writeQueue.size();
- if (numWritesThisTime >= writeHighThreshold) {
- DPRINTF(DRAM, "Hit write threshold %d\n", writeHighThreshold);
- }
-
- // If number of writes in the queue fall below the low thresholds and
- // read queue is not empty then schedule a request event else continue
- // with writes. The retry above could already have caused it to be
- // scheduled, so first check
- if (((writeQueue.size() <= writeLowThreshold) && !readQueue.empty()) ||
- writeQueue.empty()) {
- numWritesThisTime = 0;
+ // If we emptied the write queue, or got below the threshold and
+ // are not draining, or we have reads waiting and have done enough
+ // writes, then switch to reads. The retry above could already
+ // have caused it to be scheduled, so first check
+ if (writeQueue.empty() ||
+ (writeQueue.size() < writeLowThreshold && !drainManager) ||
+ (!readQueue.empty() && writesThisTime >= minWritesPerSwitch)) {
// turn the bus back around for reads again
busBusyUntil += tWTR;
stopReads = false;
+ writesThisTime = 0;
if (!nextReqEvent.scheduled())
schedule(nextReqEvent, busBusyUntil);
@@ -600,12 +593,13 @@ SimpleDRAM::printParams() const
"Memory controller %s characteristics\n" \
"Read buffer size %d\n" \
"Write buffer size %d\n" \
- "Write buffer thresh %d\n" \
+ "Write high thresh %d\n" \
+ "Write low thresh %d\n" \
"Scheduler %s\n" \
"Address mapping %s\n" \
"Page policy %s\n",
name(), readBufferSize, writeBufferSize, writeHighThreshold,
- scheduler, address_mapping, page_policy);
+ writeLowThreshold, scheduler, address_mapping, page_policy);
DPRINTF(DRAM, "Memory controller %s timing specs\n" \
"tRCD %d ticks\n" \
@@ -1258,11 +1252,11 @@ SimpleDRAM::scheduleNextReq()
// Figure out which read request goes next, and move it to the
// front of the read queue
if (!chooseNextRead()) {
- // In the case there is no read request to go next, see if we
- // are asked to drain, and if so trigger writes, this also
- // ensures that if we hit the write limit we will do this
- // multiple times until we are completely drained
- if (drainManager && !writeQueue.empty() && !writeEvent.scheduled())
+ // In the case there is no read request to go next, trigger
+ // writes if we have passed the low threshold (or if we are
+ // draining)
+ if (!writeQueue.empty() && !writeEvent.scheduled() &&
+ (writeQueue.size() > writeLowThreshold || drainManager))
triggerWrites();
} else {
doDRAMAccess(readQueue.front());
diff --git a/src/mem/simple_dram.hh b/src/mem/simple_dram.hh
index 0731b14bb..8ecce94b7 100644
--- a/src/mem/simple_dram.hh
+++ b/src/mem/simple_dram.hh
@@ -471,17 +471,17 @@ class SimpleDRAM : public AbstractMemory
const uint32_t devicesPerRank;
const uint32_t burstSize;
const uint32_t rowBufferSize;
+ const uint32_t columnsPerRowBuffer;
const uint32_t ranksPerChannel;
const uint32_t banksPerRank;
const uint32_t channels;
uint32_t rowsPerBank;
- uint32_t columnsPerRowBuffer;
const uint32_t readBufferSize;
const uint32_t writeBufferSize;
- const double writeHighThresholdPerc;
- uint32_t writeHighThreshold;
- const double writeLowThresholdPerc;
- uint32_t writeLowThreshold;
+ const uint32_t writeHighThreshold;
+ const uint32_t writeLowThreshold;
+ const uint32_t minWritesPerSwitch;
+ uint32_t writesThisTime;
/**
* Basic memory timing parameters initialized based on parameter
@@ -530,9 +530,6 @@ class SimpleDRAM : public AbstractMemory
Tick prevArrival;
int numReqs;
- // Tracks number of writes done to meet the write threshold
- uint32_t numWritesThisTime;
-
// The absolute soonest you have to start thinking about the
// next request is the longest access time that can occur before
// busBusyUntil. Assuming you need to precharge,