summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorGabor Dozsa <gabor.dozsa@arm.com>2017-07-07 16:41:12 +0100
committerAndreas Sandberg <andreas.sandberg@arm.com>2017-07-27 15:16:30 +0000
commit662d2cde83d3ea10b3d189d0bcb6a1ef5a4349c1 (patch)
tree32af7e17901e1fc1c882e62fc58eeb38a8c1d5cf
parentbc818b2a9b2bc5824b26827e06600f9fa0badbec (diff)
downloadgem5-662d2cde83d3ea10b3d189d0bcb6a1ef5a4349c1.tar.xz
config, arm: SE configuration for the ARM starter kit
Add a full system example configuration for the ARM Research Starter Kit on System Modeling. More information can be found at: http://www.arm.com/ResearchEnablement/SystemModeling Change-Id: Ia32a28eb713ba7050d790327ba6dbb73ec33b53a Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com> [ Minor cleanups and more documentation ] Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/4203 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
-rw-r--r--configs/example/arm/starter_se.py233
1 files changed, 233 insertions, 0 deletions
diff --git a/configs/example/arm/starter_se.py b/configs/example/arm/starter_se.py
new file mode 100644
index 000000000..902e6e49a
--- /dev/null
+++ b/configs/example/arm/starter_se.py
@@ -0,0 +1,233 @@
+# Copyright (c) 2016-2017 ARM Limited
+# All rights reserved.
+#
+# The license below extends only to copyright in the software and shall
+# not be construed as granting a license to any other intellectual
+# property including but not limited to intellectual property relating
+# to a hardware implementation of the functionality of the software
+# licensed hereunder. You may use the software subject to the license
+# terms below provided that you ensure that this notice is replicated
+# unmodified and in its entirety in all distributions of the software,
+# modified or unmodified, in source code or in binary form.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met: redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer;
+# redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution;
+# neither the name of the copyright holders nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Authors: Andreas Sandberg
+# Chuan Zhu
+# Gabor Dozsa
+#
+
+"""This script is the syscall emulation example script from the ARM
+Research Starter Kit on System Modeling. More information can be found
+at: http://www.arm.com/ResearchEnablement/SystemModeling
+"""
+
+import os
+import m5
+from m5.util import addToPath
+from m5.objects import *
+import argparse
+import shlex
+
+m5.util.addToPath('../..')
+
+from common import MemConfig
+from common.cores.arm import HPI
+
+import devices
+
+
+
+# Pre-defined CPU configurations. Each tuple must be ordered as : (cpu_class,
+# l1_icache_class, l1_dcache_class, walk_cache_class, l2_Cache_class). Any of
+# the cache class may be 'None' if the particular cache is not present.
+cpu_types = {
+ "atomic" : ( AtomicSimpleCPU, None, None, None, None),
+ "minor" : (MinorCPU,
+ devices.L1I, devices.L1D,
+ devices.WalkCache,
+ devices.L2),
+ "hpi" : ( HPI.HPI,
+ HPI.HPI_ICache, HPI.HPI_DCache,
+ HPI.HPI_WalkCache,
+ HPI.HPI_L2)
+}
+
+
+class SimpleSeSystem(System):
+ '''
+ Example system class for syscall emulation mode
+ '''
+
+ # Use a fixed cache line size of 64 bytes
+ cache_line_size = 64
+
+ def __init__(self, args, **kwargs):
+ super(SimpleSeSystem, self).__init__(**kwargs)
+
+ # Setup book keeping to be able to use CpuClusters from the
+ # devices module.
+ self._clusters = []
+ self._num_cpus = 0
+
+ # Create a voltage and clock domain for system components
+ self.voltage_domain = VoltageDomain(voltage="3.3V")
+ self.clk_domain = SrcClockDomain(clock="1GHz",
+ voltage_domain=self.voltage_domain)
+
+ # Create the off-chip memory bus.
+ self.membus = SystemXBar()
+
+ # Wire up the system port that gem5 uses to load the kernel
+ # and to perform debug accesses.
+ self.system_port = self.membus.slave
+
+
+ # Add CPUs to the system. A cluster of CPUs typically have
+ # private L1 caches and a shared L2 cache.
+ self.cpu_cluster = devices.CpuCluster(self,
+ args.num_cores,
+ args.cpu_freq, "1.2V",
+ *cpu_types[args.cpu])
+
+ # Create a cache hierarchy (unless we are simulating a
+ # functional CPU in atomic memory mode) for the CPU cluster
+ # and connect it to the shared memory bus.
+ if self.cpu_cluster.memoryMode() == "timing":
+ self.cpu_cluster.addL1()
+ self.cpu_cluster.addL2(self.cpu_cluster.clk_domain)
+ self.cpu_cluster.connectMemSide(self.membus)
+
+ # Tell gem5 about the memory mode used by the CPUs we are
+ # simulating.
+ self.mem_mode = self.cpu_cluster.memoryMode()
+
+ def numCpuClusters(self):
+ return len(self._clusters)
+
+ def addCpuCluster(self, cpu_cluster, num_cpus):
+ assert cpu_cluster not in self._clusters
+ assert num_cpus > 0
+ self._clusters.append(cpu_cluster)
+ self._num_cpus += num_cpus
+
+ def numCpus(self):
+ return self._num_cpus
+
+def get_processes(cmd):
+ """Interprets commands to run and returns a list of processes"""
+
+ cwd = os.getcwd()
+ multiprocesses = []
+ for idx, c in enumerate(cmd):
+ argv = shlex.split(c)
+
+ process = Process(pid=100 + idx, cwd=cwd, cmd=argv, executable=argv[0])
+
+ print "info: %d. command and arguments: %s" % (idx + 1, process.cmd)
+ multiprocesses.append(process)
+
+ return multiprocesses
+
+
+def create(args):
+ ''' Create and configure the system object. '''
+
+ system = SimpleSeSystem(args)
+
+ # Tell components about the expected physical memory ranges. This
+ # is, for example, used by the MemConfig helper to determine where
+ # to map DRAMs in the physical address space.
+ system.mem_ranges = [ AddrRange(start=0, size=args.mem_size) ]
+
+ # Configure the off-chip memory system.
+ MemConfig.config_mem(args, system)
+
+ # Parse the command line and get a list of Processes instances
+ # that we can pass to gem5.
+ processes = get_processes(args.commands_to_run)
+ if len(processes) != args.num_cores:
+ print "Error: Cannot map %d command(s) onto %d " \
+ "CPU(s)" % (len(processes), args.num_cores)
+ sys.exit(1)
+
+ # Assign one workload to each CPU
+ for cpu, workload in zip(system.cpu_cluster.cpus, processes):
+ cpu.workload = workload
+
+ return system
+
+
+def main():
+ parser = argparse.ArgumentParser(epilog=__doc__)
+
+ parser.add_argument("commands_to_run", metavar="command(s)", nargs='*',
+ help="Command(s) to run")
+ parser.add_argument("--cpu", type=str, choices=cpu_types.keys(),
+ default="atomic",
+ help="CPU model to use")
+ parser.add_argument("--cpu-freq", type=str, default="4GHz")
+ parser.add_argument("--num-cores", type=int, default=1,
+ help="Number of CPU cores")
+ parser.add_argument("--mem-type", default="DDR3_1600_8x8",
+ choices=MemConfig.mem_names(),
+ help = "type of memory to use")
+ parser.add_argument("--mem-channels", type=int, default=2,
+ help = "number of memory channels")
+ parser.add_argument("--mem-ranks", type=int, default=None,
+ help = "number of memory ranks per channel")
+ parser.add_argument("--mem-size", action="store", type=str,
+ default="2GB",
+ help="Specify the physical memory size")
+
+ args = parser.parse_args()
+
+ # Create a single root node for gem5's object hierarchy. There can
+ # only exist one root node in the simulator at any given
+ # time. Tell gem5 that we want to use syscall emulation mode
+ # instead of full system mode.
+ root = Root(full_system=False)
+
+ # Populate the root node with a system. A system corresponds to a
+ # single node with shared memory.
+ root.system = create(args)
+
+ # Instantiate the C++ object hierarchy. After this point,
+ # SimObjects can't be instantiated anymore.
+ m5.instantiate()
+
+ # Start the simulator. This gives control to the C++ world and
+ # starts the simulator. The returned event tells the simulation
+ # script why the simulator exited.
+ event = m5.simulate()
+
+ # Print the reason for the simulation exit. Some exit codes are
+ # requests for service (e.g., checkpoints) from the simulation
+ # script. We'll just ignore them here and exit.
+ print event.getCause(), " @ ", m5.curTick()
+ sys.exit(event.getCode())
+
+
+if __name__ == "__m5_main__":
+ main()