power: Add voltage domains to the clock domains

This patch adds the notion of voltage domains, and groups clock
domains that operate under the same voltage (i.e. power supply) into
domains. Each clock domain is required to be associated with a voltage
domain, and the latter requires the voltage to be explicitly set.

A voltage domain is an independently controllable voltage supply being
provided to section of the design. Thus, if you wish to perform
dynamic voltage scaling on a CPU, its clock domain should be
associated with a separate voltage domain.

The current implementation of the voltage domain does not take into
consideration cases where there are derived voltage domains running at
ratio of native voltage domains, as with the case where there can be
on-chip buck/boost (charge pumps) voltage regulation logic.

The regression and configuration scripts are updated with a generic
voltage domain for the system, and one for the CPUs.

2 files changed, 33 insertions, 5 deletions

diff --git a/configs/example/fs.py b/configs/example/fs.py
index 037a54b75..ff59ca67d 100644
--- a/configs/example/fs.py
+++ b/configs/example/fs.py
@@ -116,11 +116,20 @@ elif buildEnv['TARGET_ISA'] == "arm":
 else:
     fatal("Incapable of building %s full system!", buildEnv['TARGET_ISA'])
 
+# Create a top-level voltage domain
+test_sys.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
+
 # Create a source clock for the system and set the clock period
-test_sys.clk_domain = SrcClockDomain(clock =  options.sys_clock)
+test_sys.clk_domain = SrcClockDomain(clock =  options.sys_clock,
+                                     voltage_domain = test_sys.voltage_domain)
+
+# Create a CPU voltage domain
+test_sys.cpu_voltage_domain = VoltageDomain()
 
 # Create a source clock for the CPUs and set the clock period
-test_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock)
+test_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
+                                         voltage_domain =
+                                         test_sys.cpu_voltage_domain)
 
 if options.kernel is not None:
     test_sys.kernel = binary(options.kernel)
@@ -182,11 +191,19 @@ if len(bm) == 2:
     elif buildEnv['TARGET_ISA'] == 'arm':
         drive_sys = makeArmSystem(drive_mem_mode, options.machine_type, bm[1])
 
+    # Create a top-level voltage domain
+    drive_sys.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
+
     # Create a source clock for the system and set the clock period
     drive_sys.clk_domain = SrcClockDomain(clock =  options.sys_clock)
 
+    # Create a CPU voltage domain
+    drive_sys.cpu_voltage_domain = VoltageDomain()
+
     # Create a source clock for the CPUs and set the clock period
-    drive_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock)
+    drive_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
+                                              voltage_domain =
+                                              drive_sys.cpu_voltage_domain)
 
     drive_sys.cpu = DriveCPUClass(clk_domain=drive_sys.cpu_clk_domain,
                                   cpu_id=0)
diff --git a/configs/example/se.py b/configs/example/se.py
index 7b577239f..39572cd86 100644
--- a/configs/example/se.py
+++ b/configs/example/se.py
@@ -159,11 +159,22 @@ np = options.num_cpus
 system = System(cpu = [CPUClass(cpu_id=i) for i in xrange(np)],
                 physmem = MemClass(range=AddrRange(options.mem_size)),
                 mem_mode = test_mem_mode,
-                clk_domain = SrcClockDomain(clock = options.sys_clock),
                 cache_line_size = options.cacheline_size)
 
+# Create a top-level voltage domain
+system.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
+
+# Create a source clock for the system and set the clock period
+system.clk_domain = SrcClockDomain(clock =  options.sys_clock,
+                                   voltage_domain = system.voltage_domain)
+
+# Create a CPU voltage domain
+system.cpu_voltage_domain = VoltageDomain()
+
 # Create a separate clock domain for the CPUs
-system.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock)
+system.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
+                                       voltage_domain =
+                                       system.cpu_voltage_domain)
 
 # All cpus belong to a common cpu_clk_domain, therefore running at a common
 # frequency.