Merge zizzer.eecs.umich.edu:/bk/m5

into crampon.my.domain:/z/binkertn/research/m5/head

--HG--
extra : convert_revision : b0c9b044b44a1bfc4cded2ebfa240b799dd4a5a0

1 files changed, 197 insertions, 0 deletions

diff --git a/dev/ide_wdcreg.h b/dev/ide_wdcreg.h
new file mode 100644
index 000000000..ed7475ec8
--- /dev/null
+++ b/dev/ide_wdcreg.h
@@ -0,0 +1,197 @@
+/*      $OpenBSD: wdcreg.h,v 1.13 2004/09/24 07:05:44 grange Exp $     */
+/*	$NetBSD: wdcreg.h,v 1.22 1999/03/07 14:02:54 bouyer Exp $	*/
+
+/*-
+ * Copyright (c) 1991 The Regents of the University of California.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * William Jolitz.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)wdreg.h	7.1 (Berkeley) 5/9/91
+ */
+
+#ifndef _DEV_IC_WDCREG_H_
+#define _DEV_IC_WDCREG_H_
+
+/*
+ * Controller register (wdr_ctlr)
+ */
+#define WDCTL_4BIT	0x08	/* use four head bits (wd1003) */
+#define WDCTL_RST	0x04	/* reset the controller */
+#define WDCTL_IDS	0x02	/* disable controller interrupts */
+
+/*
+ * Status bits.
+ */
+#define WDCS_BSY	0x80	/* busy */
+#define WDCS_DRDY	0x40	/* drive ready */
+#define WDCS_DWF	0x20	/* drive write fault */
+#define WDCS_DSC	0x10	/* drive seek complete */
+#define WDCS_DRQ	0x08	/* data request */
+#define WDCS_CORR	0x04	/* corrected data */
+#define WDCS_IDX	0x02	/* index */
+#define WDCS_ERR	0x01	/* error */
+#define WDCS_BITS	"\020\010BSY\007DRDY\006DWF\005DSC\004DRQ\003CORR\002IDX\001ERR"
+
+/*
+ * Error bits.
+ */
+#define WDCE_BBK	0x80	/* bad block detected */
+#define WDCE_CRC	0x80	/* CRC error (Ultra-DMA only) */
+#define WDCE_UNC	0x40	/* uncorrectable data error */
+#define WDCE_MC		0x20	/* media changed */
+#define WDCE_IDNF	0x10	/* id not found */
+#define WDCE_MCR	0x08	/* media change requested */
+#define WDCE_ABRT	0x04	/* aborted command */
+#define WDCE_TK0NF	0x02	/* track 0 not found */
+#define WDCE_AMNF	0x01	/* address mark not found */
+
+/*
+ * Commands for Disk Controller.
+ */
+#define WDCC_NOP	0x00	/* NOP - Always fail with "aborted command" */
+#define WDCC_RECAL	0x10	/* disk restore code -- resets cntlr */
+
+#define WDCC_READ	0x20	/* disk read code */
+#define WDCC_WRITE	0x30	/* disk write code */
+#define WDCC__LONG	0x02	/* modifier -- access ecc bytes */
+#define WDCC__NORETRY	0x01	/* modifier -- no retrys */
+
+#define WDCC_FORMAT	0x50	/* disk format code */
+#define WDCC_DIAGNOSE	0x90	/* controller diagnostic */
+#define WDCC_IDP	0x91	/* initialize drive parameters */
+
+#define WDCC_READMULTI	0xc4	/* read multiple */
+#define WDCC_WRITEMULTI	0xc5	/* write multiple */
+#define WDCC_SETMULTI	0xc6	/* set multiple mode */
+
+#define WDCC_READDMA	0xc8	/* read with DMA */
+#define WDCC_WRITEDMA	0xca	/* write with DMA */
+
+#define WDCC_ACKMC	0xdb	/* acknowledge media change */
+#define WDCC_LOCK	0xde	/* lock drawer */
+#define WDCC_UNLOCK	0xdf	/* unlock drawer */
+
+#define WDCC_FLUSHCACHE	0xe7	/* Flush cache */
+#define WDCC_IDENTIFY	0xec	/* read parameters from controller */
+#define SET_FEATURES	0xef	/* set features */
+
+#define WDCC_IDLE	0xe3	/* set idle timer & enter idle mode */
+#define WDCC_IDLE_IMMED	0xe1	/* enter idle mode */
+#define WDCC_SLEEP	0xe6	/* enter sleep mode */
+#define WDCC_STANDBY	0xe2	/* set standby timer & enter standby mode */
+#define WDCC_STANDBY_IMMED 0xe0	/* enter standby mode */
+#define WDCC_CHECK_PWR	0xe5	/* check power mode */
+
+#define WDCC_READ_EXT		0x24 /* read 48-bit addressing */
+#define WDCC_WRITE_EXT		0x34 /* write 48-bit addressing */
+
+#define WDCC_READMULTI_EXT	0x29 /* read multiple 48-bit addressing */
+#define WDCC_WRITEMULTI_EXT	0x39 /* write multiple 48-bit addressing */
+
+#define WDCC_READDMA_EXT	0x25 /* read 48-bit addressing with DMA */
+#define WDCC_WRITEDMA_EXT	0x35 /* write 48-bit addressing with DMA */
+
+#define WDCC_FLUSHCACHE_EXT	0xea /* 48-bit addressing flush cache */
+
+/* Subcommands for SET_FEATURES (features register ) */
+#define WDSF_8BIT_PIO_EN	0x01 /* Enable 8bit PIO (CFA featureset) */
+#define WDSF_EN_WR_CACHE	0x02
+#define WDSF_SET_MODE		0x03
+#define WDSF_REASSIGN_EN	0x04 /* Obsolete in ATA-6 */
+#define WDSF_APM_EN		0x05 /* Enable Adv. Power Management */
+#define WDSF_PUIS_EN		0x06 /* Enable Power-Up In Standby */
+#define WDSF_PUIS_SPINUP	0x07 /* Power-Up In Standby spin-up */
+#define WDSF_CFA_MODE1_EN	0x0A /* Enable CFA power mode 1 */
+#define WDSF_RMSN_DS		0x31 /* Disable Removable Media Status */
+#define WDSF_RETRY_DS		0x33 /* Obsolete in ATA-6 */
+#define WDSF_AAM_EN		0x42 /* Enable Autom. Acoustic Management */
+#define WDSF_SET_CACHE_SGMT	0x54 /* Obsolete in ATA-6 */
+#define WDSF_READAHEAD_DS	0x55 /* Disable read look-ahead */
+#define WDSF_RLSE_EN		0x5D /* Enable release interrupt */
+#define WDSF_SRV_EN		0x5E /* Enable SERVICE interrupt */
+#define WDSF_POD_DS		0x66
+#define WDSF_ECC_DS		0x77
+#define WDSF_8BIT_PIO_DS	0x81 /* Disable 8bit PIO (CFA featureset) */
+#define WDSF_WRITE_CACHE_DS	0x82
+#define WDSF_REASSIGN_DS	0x84
+#define WDSF_APM_DS		0x85 /* Disable Adv. Power Management */
+#define WDSF_PUIS_DS		0x86 /* Disable Power-Up In Standby */
+#define WDSF_ECC_EN		0x88
+#define WDSF_CFA_MODE1_DS	0x8A /* Disable CFA power mode 1 */
+#define WDSF_RMSN_EN		0x95 /* Enable Removable Media Status */
+#define WDSF_RETRY_EN		0x99 /* Obsolete in ATA-6 */
+#define WDSF_SET_CURRENT	0x9A /* Obsolete in ATA-6 */
+#define WDSF_READAHEAD_EN	0xAA
+#define WDSF_PREFETCH_SET	0xAB /* Obsolete in ATA-6 */
+#define WDSF_AAM_DS		0xC2 /* Disable Autom. Acoustic Management */
+#define WDSF_POD_EN		0xCC
+#define WDSF_RLSE_DS		0xDD /* Disable release interrupt */
+#define WDSF_SRV_DS		0xDE /* Disable SERVICE interrupt */
+#define WDSF_READ_NATIVE_MAX    0xF8
+#define WDSF_SEEK               0x70
+#define WDSF_VERIFY             0x40
+
+/* parameters uploaded to device/heads register */
+#define WDSD_IBM	0xa0	/* forced to 512 byte sector, ecc */
+#define WDSD_CHS	0x00	/* cylinder/head/sector addressing */
+#define WDSD_LBA	0x40	/* logical block addressing */
+
+/* Commands for ATAPI devices */
+#define ATAPI_CHECK_POWER_MODE	0xe5
+#define ATAPI_EXEC_DRIVE_DIAGS	0x90
+#define ATAPI_IDLE_IMMEDIATE	0xe1
+#define ATAPI_NOP		0x00
+#define ATAPI_PKT_CMD		0xa0
+#define ATAPI_IDENTIFY_DEVICE	0xa1
+#define ATAPI_SOFT_RESET	0x08
+#define ATAPI_DEVICE_RESET	0x08 /* ATA/ATAPI-5 name for soft reset */
+#define ATAPI_SLEEP		0xe6
+#define ATAPI_STANDBY_IMMEDIATE	0xe0
+#define ATAPI_SMART		0xB0 /* SMART operations */
+#define ATAPI_SETMAX		0xF9 /* Set Max Address */
+#define ATAPI_WRITEEXT		0x34 /* Write sectors Ext */
+#define ATAPI_SETMAXEXT		0x37 /* Set Max Address Ext */
+#define ATAPI_WRITEMULTIEXT	0x39 /* Write Multi Ext */
+
+/* Bytes used by ATAPI_PACKET_COMMAND ( feature register) */
+#define ATAPI_PKT_CMD_FTRE_DMA	0x01
+#define ATAPI_PKT_CMD_FTRE_OVL	0x02
+
+/* ireason */
+#define WDCI_CMD	0x01 /* command(1) or data(0) */
+#define WDCI_IN		0x02 /* transfer to(1) or from(0) the host */
+#define WDCI_RELEASE	0x04 /* bus released until completion */
+
+#define PHASE_CMDOUT	(WDCS_DRQ | WDCI_CMD)
+#define PHASE_DATAIN	(WDCS_DRQ | WDCI_IN)
+#define PHASE_DATAOUT	WDCS_DRQ
+#define PHASE_COMPLETED	(WDCI_IN | WDCI_CMD)
+#define PHASE_ABORTED	0
+
+#endif	/* !_DEV_IC_WDCREG_H_ */