diff options
author | Andreas Sandberg <andreas.sandberg@arm.com> | 2019-10-25 09:25:40 +0100 |
---|---|---|
committer | Andreas Sandberg <andreas.sandberg@arm.com> | 2019-10-29 09:51:28 +0000 |
commit | cdc4a3cf1496c6c3bd8619ac7970a6090e38d305 (patch) | |
tree | cd24b9b7284ef6b0061d61aa3f572f93c9cd409d /ext/fputils | |
parent | 39220ef3681deb8c224cdcf28efdaa74bfa2facd (diff) | |
download | gem5-cdc4a3cf1496c6c3bd8619ac7970a6090e38d305.tar.xz |
ext: Remove non-source files from fputils
Remove the autoconf-based build system and GNU-style information files
from fputils. After this change, we only keep the files we will need
to integrate into gem5's main source tree.
Change-Id: I2ddf1d07d9cb51bcd91fc63f1ae43c7f46129933
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22163
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Diffstat (limited to 'ext/fputils')
-rw-r--r-- | ext/fputils/AUTHORS | 1 | ||||
-rw-r--r-- | ext/fputils/COPYING | 25 | ||||
-rw-r--r-- | ext/fputils/Doxyfile.in | 1792 | ||||
-rw-r--r-- | ext/fputils/INSTALL | 370 | ||||
-rw-r--r-- | ext/fputils/Makefile.am | 25 | ||||
-rw-r--r-- | ext/fputils/configure.ac | 36 | ||||
-rw-r--r-- | ext/fputils/doxygen.am | 105 | ||||
-rw-r--r-- | ext/fputils/m4/ax_prog_doxygen.m4 | 532 | ||||
-rw-r--r-- | ext/fputils/tests/Makefile.am | 13 | ||||
-rw-r--r-- | ext/fputils/tests/test_helper.c | 158 | ||||
-rw-r--r-- | ext/fputils/tests/test_helper.h | 60 |
11 files changed, 0 insertions, 3117 deletions
diff --git a/ext/fputils/AUTHORS b/ext/fputils/AUTHORS deleted file mode 100644 index 0f11b15dc..000000000 --- a/ext/fputils/AUTHORS +++ /dev/null @@ -1 +0,0 @@ -Andreas Sandberg <andreas@sandberg.pp.se> diff --git a/ext/fputils/COPYING b/ext/fputils/COPYING deleted file mode 100644 index 04d9c0943..000000000 --- a/ext/fputils/COPYING +++ /dev/null @@ -1,25 +0,0 @@ -Copyright (c) 2013 Andreas Sandberg -All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are -met: redistributions of source code must retain the above copyright -notice, this list of conditions and the following disclaimer; -redistributions in binary form must reproduce the above copyright -notice, this list of conditions and the following disclaimer in the -documentation and/or other materials provided with the distribution; -neither the name of the copyright holders nor the names of its -contributors may be used to endorse or promote products derived from -this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/ext/fputils/Doxyfile.in b/ext/fputils/Doxyfile.in deleted file mode 100644 index f2cc851cf..000000000 --- a/ext/fputils/Doxyfile.in +++ /dev/null @@ -1,1792 +0,0 @@ -# Doxyfile 1.8.1.2 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project. -# -# All text after a hash (#) is considered a comment and will be ignored. -# The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" "). - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all -# text before the first occurrence of this tag. Doxygen uses libiconv (or the -# iconv built into libc) for the transcoding. See -# http://www.gnu.org/software/libiconv for the list of possible encodings. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or sequence of words) that should -# identify the project. Note that if you do not use Doxywizard you need -# to put quotes around the project name if it contains spaces. - -PROJECT_NAME = "@PACKAGE_STRING@" - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. - -PROJECT_NUMBER = - -# Using the PROJECT_BRIEF tag one can provide an optional one line description -# for a project that appears at the top of each page and should give viewer -# a quick idea about the purpose of the project. Keep the description short. - -PROJECT_BRIEF = - -# With the PROJECT_LOGO tag one can specify an logo or icon that is -# included in the documentation. The maximum height of the logo should not -# exceed 55 pixels and the maximum width should not exceed 200 pixels. -# Doxygen will copy the logo to the output directory. - -PROJECT_LOGO = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. - -OUTPUT_DIRECTORY = @DX_DOCDIR@ - -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would -# otherwise cause performance problems for the file system. - -CREATE_SUBDIRS = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, -# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" -# "represents" "a" "an" "the" - -ABBREVIATE_BRIEF = - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - -FULL_PATH_NAMES = YES - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the -# path to strip. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that -# are normally passed to the compiler using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful if your file system -# doesn't support long names like on DOS, Mac, or CD-ROM. - -SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like regular Qt-style comments -# (thus requiring an explicit @brief command for a brief description.) - -JAVADOC_AUTOBRIEF = NO - -# If the QT_AUTOBRIEF tag is set to YES then Doxygen will -# interpret the first line (until the first dot) of a Qt-style -# comment as the brief description. If set to NO, the comments -# will behave just like regular Qt-style comments (thus requiring -# an explicit \brief command for a brief description.) - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# re-implements. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will -# be part of the file/class/namespace that contains it. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. - -TAB_SIZE = 8 - -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - -ALIASES = - -# This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding -# "class=itcl::class" will allow you to use the command class in the -# itcl::class meaning. - -TCL_SUBST = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list -# of all members will be omitted, etc. - -OPTIMIZE_OUTPUT_FOR_C = NO - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for -# Java. For instance, namespaces will be presented as packages, qualified -# scopes will look different, etc. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources only. Doxygen will then generate output that is more tailored for -# Fortran. - -OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for -# VHDL. - -OPTIMIZE_OUTPUT_VHDL = NO - -# Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. - -EXTENSION_MAPPING = - -# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all -# comments according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. -# The output of markdown processing is further processed by doxygen, so you -# can mix doxygen, HTML, and XML commands with Markdown formatting. -# Disable only in case of backward compatibilities issues. - -MARKDOWN_SUPPORT = YES - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should -# set this tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. -# func(std::string) {}). This also makes the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. -# Doxygen will parse them like normal C++ but will assume all classes use public -# instead of private inheritance when no explicit protection keyword is present. - -SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. - -IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - -DISTRIBUTE_GROUP_DOC = NO - -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using -# the \nosubgrouping command. - -SUBGROUPING = YES - -# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and -# unions are shown inside the group in which they are included (e.g. using -# @ingroup) instead of on a separate page (for HTML and Man pages) or -# section (for LaTeX and RTF). - -INLINE_GROUPED_CLASSES = NO - -# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). - -INLINE_SIMPLE_STRUCTS = NO - -# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum -# is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically -# be useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. - -TYPEDEF_HIDES_STRUCT = NO - -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -LOOKUP_CACHE_SIZE = 0 - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES - -EXTRACT_ALL = NO - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. - -EXTRACT_PRIVATE = NO - -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. - -EXTRACT_PACKAGE = NO - -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. - -EXTRACT_STATIC = NO - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. -# If set to NO (the default) only methods in the interface are included. - -EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base -# name of the file that contains the anonymous namespace. By default -# anonymous namespaces are hidden. - -EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the -# documentation. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the -# function's detailed documentation block. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. - -CASE_SENSE_NAMES = YES - -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. - -HIDE_SCOPE_NAMES = NO - -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation -# of that file. - -SHOW_INCLUDE_FILES = YES - -# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen -# will list include files with double quotes in the documentation -# rather than with sharp brackets. - -FORCE_LOCAL_INCLUDES = NO - -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in -# declaration order. - -SORT_BRIEF_DOCS = NO - -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen -# will sort the (brief and detailed) documentation of class members so that -# constructors and destructors are listed first. If set to NO (the default) -# the constructors will appear in the respective orders defined by -# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. -# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO -# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. - -SORT_MEMBERS_CTORS_1ST = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the -# hierarchy of group names into alphabetical order. If set to NO (the default) -# the group names will appear in their defined order. - -SORT_GROUP_NAMES = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the -# alphabetical list. - -SORT_BY_SCOPE_NAME = NO - -# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to -# do proper type resolution of all parameters of a function it will reject a -# match between the prototype and the implementation of a member function even -# if there is only one candidate or it is obvious which candidate to choose -# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen -# will still accept a match between prototype and implementation in such cases. - -STRICT_PROTO_MATCHING = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. - -GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. - -GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. - -GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting -# \deprecated commands in the documentation. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or macro consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and macros in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. - -SHOW_USED_FILES = YES - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. -# This will remove the Files entry from the Quick Index and from the -# Folder Tree View (if specified). The default is YES. - -SHOW_FILES = YES - -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the -# Namespaces page. -# This will remove the Namespaces entry from the Quick Index -# and from the Folder Tree View (if specified). The default is YES. - -SHOW_NAMESPACES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command <command> <input-file>, where <command> is the value of -# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file -# provided by doxygen. Whatever the program writes to standard output -# is used as the file version. See the manual for examples. - -FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. To create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. -# You can optionally specify a file name after the option, if omitted -# DoxygenLayout.xml will be used as the name of the layout file. - -LAYOUT_FILE = - -# The CITE_BIB_FILES tag can be used to specify one or more bib files -# containing the references data. This must be a list of .bib files. The -# .bib extension is automatically appended if omitted. Using this command -# requires the bibtex tool to be installed. See also -# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style -# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this -# feature you need bibtex and perl available in the search path. - -CITE_BIB_FILES = - -#--------------------------------------------------------------------------- -# configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. - -QUIET = NO - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. - -WARNINGS = YES - -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. - -WARN_IF_UNDOCUMENTED = YES - -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that -# don't exist or using markup commands wrongly. - -WARN_IF_DOC_ERROR = YES - -# The WARN_NO_PARAMDOC option can be enabled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of -# documentation. - -WARN_NO_PARAMDOC = YES - -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could -# be obtained via FILE_VERSION_FILTER) - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. - -INPUT = @top_srcdir@/ - -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is -# also the default input encoding. Doxygen uses libiconv (or the iconv built -# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for -# the list of possible encodings. - -INPUT_ENCODING = UTF-8 - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh -# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py -# *.f90 *.f *.for *.vhd *.vhdl - -FILE_PATTERNS = *.c *.h - -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. - -RECURSIVE = YES - -# The EXCLUDE tag can be used to specify files and/or directories that should be -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. -# Note that relative paths are relative to the directory from which doxygen is -# run. - -EXCLUDE = config.h - -# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or -# directories that are symbolic links (a Unix file system feature) are excluded -# from the input. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. Note that the wildcards are matched -# against the file with absolute path, so to exclude all test directories -# for example use the pattern */test/* - -EXCLUDE_PATTERNS = - -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test - -EXCLUDE_SYMBOLS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. - -EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command <filter> <input-file>, where <filter> -# is the value of the INPUT_FILTER tag, and <input-file> is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. - -INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. -# Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. -# The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty or if -# non of the patterns match the file name, INPUT_FILTER is applied. - -FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse (i.e. when SOURCE_BROWSER is set to YES). - -FILTER_SOURCE_FILES = NO - -# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file -# pattern. A pattern will override the setting for FILTER_PATTERN (if any) -# and it is also possible to disable source filtering for a specific pattern -# using *.ext= (so without naming a filter). This option only has effect when -# FILTER_SOURCE_FILES is enabled. - -FILTER_SOURCE_PATTERNS = - -#--------------------------------------------------------------------------- -# configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. - -SOURCE_BROWSER = NO - -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C, C++ and Fortran comments will always remain visible. - -STRIP_CODE_COMMENTS = NO - -# If the REFERENCED_BY_RELATION tag is set to YES -# then for each documented function all documented -# functions referencing it will be listed. - -REFERENCED_BY_RELATION = NO - -# If the REFERENCES_RELATION tag is set to YES -# then for each documented function all documented entities -# called/used by that function will be listed. - -REFERENCES_RELATION = NO - -# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) -# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from -# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will -# link to the source code. -# Otherwise they will link to the documentation. - -REFERENCES_LINK_SOURCE = YES - -# If the USE_HTAGS tag is set to YES then the references to source code -# will point to the HTML generated by the htags(1) tool instead of doxygen -# built-in source browser. The htags tool is part of GNU's global source -# tagging system (see http://www.gnu.org/software/global/global.html). You -# will need version 4.8.6 or higher. - -USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - -VERBATIM_HEADERS = YES - -#--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. - -ALPHABETICAL_INDEX = YES - -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. Note that when using a custom header you are responsible -# for the proper inclusion of any scripts and style sheets that doxygen -# needs, which is dependent on the configuration options used. -# It is advised to generate a default header using "doxygen -w html -# header.html footer.html stylesheet.css YourConfigFile" and then modify -# that header. Note that the header is subject to change so you typically -# have to redo this when upgrading to a newer version of doxygen or when -# changing the value of configuration settings such as GENERATE_TREEVIEW! - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - -HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! - -HTML_STYLESHEET = - -# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or -# other source files which should be copied to the HTML output directory. Note -# that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these -# files. In the HTML_STYLESHEET file, use the file name only. Also note that -# the files will be copied as-is; there are no commands or markers available. - -HTML_EXTRA_FILES = - -# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. -# Doxygen will adjust the colors in the style sheet and background images -# according to this color. Hue is specified as an angle on a colorwheel, -# see http://en.wikipedia.org/wiki/Hue for more information. -# For instance the value 0 represents red, 60 is yellow, 120 is green, -# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. -# The allowed range is 0 to 359. - -HTML_COLORSTYLE_HUE = 220 - -# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of -# the colors in the HTML output. For a value of 0 the output will use -# grayscales only. A value of 255 will produce the most vivid colors. - -HTML_COLORSTYLE_SAT = 100 - -# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to -# the luminance component of the colors in the HTML output. Values below -# 100 gradually make the output lighter, whereas values above 100 make -# the output darker. The value divided by 100 is the actual gamma applied, -# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, -# and 100 does not change the gamma. - -HTML_COLORSTYLE_GAMMA = 80 - -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting -# this to NO can help when comparing the output of multiple runs. - -HTML_TIMESTAMP = YES - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. - -HTML_DYNAMIC_SECTIONS = NO - -# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of -# entries shown in the various tree structured indices initially; the user -# can expand and collapse entries dynamically later on. Doxygen will expand -# the tree to such a level that at most the specified number of entries are -# visible (unless a fully collapsed tree already exceeds this amount). -# So setting the number of entries 1 will produce a full collapsed tree by -# default. 0 is a special value representing an infinite number of entries -# and will result in a full expanded tree by default. - -HTML_INDEX_NUM_ENTRIES = 100 - -# If the GENERATE_DOCSET tag is set to YES, additional index files -# will be generated that can be used as input for Apple's Xcode 3 -# integrated development environment, introduced with OSX 10.5 (Leopard). -# To create a documentation set, doxygen will generate a Makefile in the -# HTML output directory. Running make will produce the docset in that -# directory and running "make install" will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find -# it at startup. -# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. - -GENERATE_DOCSET = NO - -# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the -# feed. A documentation feed provides an umbrella under which multiple -# documentation sets from a single provider (such as a company or product suite) -# can be grouped. - -DOCSET_FEEDNAME = "Doxygen generated docs" - -# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that -# should uniquely identify the documentation set bundle. This should be a -# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen -# will append .docset to the name. - -DOCSET_BUNDLE_ID = org.doxygen.Project - -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. - -DOCSET_PUBLISHER_ID = org.doxygen.Publisher - -# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. - -DOCSET_PUBLISHER_NAME = Publisher - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) -# of the generated HTML documentation. - -GENERATE_HTMLHELP = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be -# written to the html output directory. - -CHM_FILE = - -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run -# the HTML help compiler on the generated index.hhp. - -HHC_LOCATION = - -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). - -GENERATE_CHI = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING -# is used to encode HtmlHelp index (hhk), content (hhc) and project file -# content. - -CHM_INDEX_ENCODING = - -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the HTML help documentation and to the tree view. - -TOC_EXPAND = NO - -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and -# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated -# that can be used as input for Qt's qhelpgenerator to generate a -# Qt Compressed Help (.qch) of the generated HTML documentation. - -GENERATE_QHP = NO - -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can -# be used to specify the file name of the resulting .qch file. -# The path specified is relative to the HTML output folder. - -QCH_FILE = - -# The QHP_NAMESPACE tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#namespace - -QHP_NAMESPACE = org.doxygen.Project - -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#virtual-folders - -QHP_VIRTUAL_FOLDER = doc - -# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to -# add. For more information please see -# http://doc.trolltech.com/qthelpproject.html#custom-filters - -QHP_CUST_FILTER_NAME = - -# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the -# custom filter to add. For more information please see -# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters"> -# Qt Help Project / Custom Filters</a>. - -QHP_CUST_FILTER_ATTRS = - -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this -# project's -# filter section matches. -# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes"> -# Qt Help Project / Filter Attributes</a>. - -QHP_SECT_FILTER_ATTRS = - -# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can -# be used to specify the location of Qt's qhelpgenerator. -# If non-empty doxygen will try to run qhelpgenerator on the generated -# .qhp file. - -QHG_LOCATION = - -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files -# will be generated, which together with the HTML files, form an Eclipse help -# plugin. To install this plugin and make it available under the help contents -# menu in Eclipse, the contents of the directory containing the HTML and XML -# files needs to be copied into the plugins directory of eclipse. The name of -# the directory within the plugins directory should be the same as -# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before -# the help appears. - -GENERATE_ECLIPSEHELP = NO - -# A unique identifier for the eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have -# this name. - -ECLIPSE_DOC_ID = org.doxygen.Project - -# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) -# at top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. Since the tabs have the same information as the -# navigation tree you can set this option to NO if you already set -# GENERATE_TREEVIEW to YES. - -DISABLE_INDEX = NO - -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. -# If the tag value is set to YES, a side panel will be generated -# containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). -# Windows users are probably better off using the HTML help feature. -# Since the tree basically has the same information as the tab index you -# could consider to set DISABLE_INDEX to NO when enabling this option. - -GENERATE_TREEVIEW = NO - -# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values -# (range [0,1..20]) that doxygen will group on one line in the generated HTML -# documentation. Note that a value of 0 will completely suppress the enum -# values from appearing in the overview section. - -ENUM_VALUES_PER_LINE = 4 - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. - -TREEVIEW_WIDTH = 250 - -# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open -# links to external symbols imported via tag files in a separate window. - -EXT_LINKS_IN_WINDOW = NO - -# Use this tag to change the font size of Latex formulas included -# as images in the HTML documentation. The default is 10. Note that -# when you change the font size after a successful doxygen run you need -# to manually remove any form_*.png images from the HTML output directory -# to force them to be regenerated. - -FORMULA_FONTSIZE = 10 - -# Use the FORMULA_TRANPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are -# not supported properly for IE 6.0, but are supported on all modern browsers. -# Note that when changing this option you need to delete any form_*.png files -# in the HTML output before the changes have effect. - -FORMULA_TRANSPARENT = YES - -# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax -# (see http://www.mathjax.org) which uses client side Javascript for the -# rendering instead of using prerendered bitmaps. Use this if you do not -# have LaTeX installed or if you want to formulas look prettier in the HTML -# output. When enabled you may also need to install MathJax separately and -# configure the path to it using the MATHJAX_RELPATH option. - -USE_MATHJAX = NO - -# When MathJax is enabled you need to specify the location relative to the -# HTML output directory using the MATHJAX_RELPATH option. The destination -# directory should contain the MathJax.js script. For instance, if the mathjax -# directory is located at the same level as the HTML output directory, then -# MATHJAX_RELPATH should be ../mathjax. The default value points to -# the MathJax Content Delivery Network so you can quickly see the result without -# installing MathJax. -# However, it is strongly recommended to install a local -# copy of MathJax from http://www.mathjax.org before deployment. - -MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest - -# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension -# names that should be enabled during MathJax rendering. - -MATHJAX_EXTENSIONS = - -# When the SEARCHENGINE tag is enabled doxygen will generate a search box -# for the HTML output. The underlying search engine uses javascript -# and DHTML and should work on any modern browser. Note that when using -# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets -# (GENERATE_DOCSET) there is already a search function so this one should -# typically be disabled. For large projects the javascript based search engine -# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. - -SEARCHENGINE = YES - -# When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a PHP enabled web server instead of at the web client -# using Javascript. Doxygen will generate the search PHP script and index -# file to put on the web server. The advantage of the server -# based approach is that it scales better to large projects and allows -# full text search. The disadvantages are that it is more difficult to setup -# and does not have live searching capabilities. - -SERVER_BASED_SEARCH = NO - -#--------------------------------------------------------------------------- -# configuration options related to the LaTeX output -#--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. - -GENERATE_LATEX = NO - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - -LATEX_OUTPUT = latex - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. -# Note that when enabling USE_PDFLATEX this option is only used for -# generating bitmaps for formulas in the HTML output, but not in the -# Makefile that is written to the output directory. - -LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - -MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. - -PAPER_TYPE = a4 - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - -EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - -LATEX_HEADER = - -# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for -# the generated latex document. The footer should contain everything after -# the last chapter. If it is left blank doxygen will generate a -# standard footer. Notice: only use this tag if you know what you are doing! - -LATEX_FOOTER = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - -PDF_HYPERLINKS = YES - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - -USE_PDFLATEX = YES - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - -LATEX_BATCHMODE = NO - -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) -# in the output. - -LATEX_HIDE_INDICES = NO - -# If LATEX_SOURCE_CODE is set to YES then doxygen will include -# source code with syntax highlighting in the LaTeX output. -# Note that which sources are shown also depends on other settings -# such as SOURCE_BROWSER. - -LATEX_SOURCE_CODE = NO - -# The LATEX_BIB_STYLE tag can be used to specify the style to use for the -# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See -# http://en.wikipedia.org/wiki/BibTeX for more info. - -LATEX_BIB_STYLE = plain - -#--------------------------------------------------------------------------- -# configuration options related to the RTF output -#--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with -# other RTF readers or editors. - -GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. - -RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. - -RTF_HYPERLINKS = NO - -# Load style sheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide -# replacements, missing definitions are set to their default value. - -RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. - -RTF_EXTENSIONS_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to the man page output -#--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages - -GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. - -MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) - -MAN_EXTENSION = .3 - -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. - -MAN_LINKS = NO - -#--------------------------------------------------------------------------- -# configuration options related to the XML output -#--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. - -GENERATE_XML = NO - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `xml' will be used as the default path. - -XML_OUTPUT = xml - -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that -# enabling this will significantly increase the size of the XML output. - -XML_PROGRAMLISTING = YES - -#--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. - -GENERATE_AUTOGEN_DEF = NO - -#--------------------------------------------------------------------------- -# configuration options related to the Perl module output -#--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - -GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able -# to generate PDF and DVI output from the Perl module output. - -PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. -# This is useful -# if you want to understand what is going on. -# On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller -# and Perl will parse it just the same. - -PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same -# Makefile don't overwrite each other's variables. - -PERLMOD_MAKEVAR_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. - -ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. - -MACRO_EXPANSION = NO - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_DEFINED tags. - -EXPAND_ONLY_PREDEF = NO - -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# pointed to by INCLUDE_PATH will be searched when a #include is found. - -SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. - -INCLUDE_PATH = include/ - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. - -INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator -# instead of the = operator. - -PREDEFINED = - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition that -# overrules the definition found in the source code. - -EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all references to function-like macros -# that are alone on a line, have an all uppercase name, and do not end with a -# semicolon, because these will confuse the parser if not removed. - -SKIP_FUNCTION_MACROS = YES - -#--------------------------------------------------------------------------- -# Configuration::additions related to external references -#--------------------------------------------------------------------------- - -# The TAGFILES option can be used to specify one or more tagfiles. For each -# tag file the location of the external documentation should be added. The -# format of a tag file without this location is as follows: -# -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths -# or URLs. Note that each tag file must have a unique name (where the name does -# NOT include the path). If a tag file is not located in the directory in which -# doxygen is run, you must also specify the path to the tagfile here. - -TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. - -GENERATE_TAGFILE = - -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. - -ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. - -EXTERNAL_GROUPS = YES - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). - -PERL_PATH = /usr/bin/perl - -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option also works with HAVE_DOT disabled, but it is recommended to -# install and use dot, since it yields more powerful graphs. - -CLASS_DIAGRAMS = YES - -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see -# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. - -HIDE_UNDOC_RELATIONS = YES - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) - -HAVE_DOT = NO - -# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is -# allowed to run in parallel. When set to 0 (the default) doxygen will -# base this on the number of processors available in the system. You can set it -# explicitly to a value larger than 0 to get control over the balance -# between CPU load and processing speed. - -DOT_NUM_THREADS = 0 - -# By default doxygen will use the Helvetica font for all dot files that -# doxygen generates. When you want a differently looking font you can specify -# the font name using DOT_FONTNAME. You need to make sure dot is able to find -# the font, which can be done by putting it in a standard location or by setting -# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the -# directory containing the font. - -DOT_FONTNAME = Helvetica - -# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. -# The default size is 10pt. - -DOT_FONTSIZE = 10 - -# By default doxygen will tell dot to use the Helvetica font. -# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to -# set the path where dot can find it. - -DOT_FONTPATH = - -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# CLASS_DIAGRAMS tag to NO. - -CLASS_GRAPH = YES - -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. - -COLLABORATION_GRAPH = YES - -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for groups, showing the direct groups dependencies - -GROUP_GRAPHS = YES - -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling -# Language. - -UML_LOOK = NO - -# If the UML_LOOK tag is enabled, the fields and methods are shown inside -# the class node. If there are many fields or methods and many nodes the -# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS -# threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be -# exceeded by 50% before the limit is enforced. - -UML_LIMIT_NUM_FIELDS = 10 - -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. - -TEMPLATE_RELATIONS = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. - -INCLUDE_GRAPH = YES - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. - -INCLUDED_BY_GRAPH = YES - -# If the CALL_GRAPH and HAVE_DOT options are set to YES then -# doxygen will generate a call dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable call graphs -# for selected functions only using the \callgraph command. - -CALL_GRAPH = NO - -# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then -# doxygen will generate a caller dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable caller -# graphs for selected functions only using the \callergraph command. - -CALLER_GRAPH = NO - -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will generate a graphical hierarchy of all classes instead of a textual one. - -GRAPHICAL_HIERARCHY = YES - -# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include -# relations between the files in the directories. - -DIRECTORY_GRAPH = YES - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are svg, png, jpg, or gif. -# If left blank png will be used. If you choose svg you need to set -# HTML_FILE_EXTENSION to xhtml in order to make the SVG files -# visible in IE 9+ (other browsers do not have this requirement). - -DOT_IMAGE_FORMAT = png - -# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to -# enable generation of interactive SVG images that allow zooming and panning. -# Note that this requires a modern browser other than Internet Explorer. -# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you -# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files -# visible. Older versions of IE do not have SVG support. - -INTERACTIVE_SVG = NO - -# The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found in the path. - -DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). - -DOTFILE_DIRS = - -# The MSCFILE_DIRS tag can be used to specify one or more directories that -# contain msc files that are included in the documentation (see the -# \mscfile command). - -MSCFILE_DIRS = - -# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of -# nodes that will be shown in the graph. If the number of nodes in a graph -# becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the -# number of direct children of the root node in a graph is already larger than -# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note -# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. - -DOT_GRAPH_MAX_NODES = 50 - -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that the size of a graph can be further restricted by -# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. - -MAX_DOT_GRAPH_DEPTH = 0 - -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not -# seem to support this out of the box. Warning: Depending on the platform used, -# enabling this option may lead to badly anti-aliased labels on the edges of -# a graph (i.e. they become hard to read). - -DOT_TRANSPARENT = NO - -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) -# support this, this feature is disabled by default. - -DOT_MULTI_TARGETS = YES - -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. - -GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate -# the various graphs. - -DOT_CLEANUP = YES diff --git a/ext/fputils/INSTALL b/ext/fputils/INSTALL deleted file mode 100644 index a1e89e18a..000000000 --- a/ext/fputils/INSTALL +++ /dev/null @@ -1,370 +0,0 @@ -Installation Instructions -************************* - -Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, -Inc. - - Copying and distribution of this file, with or without modification, -are permitted in any medium without royalty provided the copyright -notice and this notice are preserved. This file is offered as-is, -without warranty of any kind. - -Basic Installation -================== - - Briefly, the shell commands `./configure; make; make install' should -configure, build, and install this package. The following -more-detailed instructions are generic; see the `README' file for -instructions specific to this package. Some packages provide this -`INSTALL' file but do not implement all of the features documented -below. The lack of an optional feature in a given package is not -necessarily a bug. More recommendations for GNU packages can be found -in *note Makefile Conventions: (standards)Makefile Conventions. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). - - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. Caching is -disabled by default to prevent problems with accidental use of stale -cache files. - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You need `configure.ac' if -you want to change it or regenerate `configure' using a newer version -of `autoconf'. - - The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. - - Running `configure' might take a while. While running, it prints - some messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package, generally using the just-built uninstalled binaries. - - 4. Type `make install' to install the programs and any data files and - documentation. When installing into a prefix owned by root, it is - recommended that the package be configured and built as a regular - user, and only the `make install' phase executed with root - privileges. - - 5. Optionally, type `make installcheck' to repeat any self-tests, but - this time using the binaries in their final installed location. - This target does not install anything. Running this target as a - regular user, particularly if the prior `make install' required - root privileges, verifies that the installation completed - correctly. - - 6. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - - 7. Often, you can also type `make uninstall' to remove the installed - files again. In practice, not all packages have tested that - uninstallation works correctly, even though it is required by the - GNU Coding Standards. - - 8. Some packages, particularly those that use Automake, provide `make - distcheck', which can by used by developers to test that all other - targets like `make install' and `make uninstall' work correctly. - This target is generally not run by end users. - -Compilers and Options -===================== - - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. Run `./configure --help' -for details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c99 CFLAGS=-g LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - - You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you can use GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. This -is known as a "VPATH" build. - - With a non-GNU `make', it is safer to compile the package for one -architecture at a time in the source code directory. After you have -installed the package for one architecture, use `make distclean' before -reconfiguring for another architecture. - - On MacOS X 10.5 and later systems, you can create libraries and -executables that work on multiple system types--known as "fat" or -"universal" binaries--by specifying multiple `-arch' options to the -compiler but only a single `-arch' option to the preprocessor. Like -this: - - ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ - CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ - CPP="gcc -E" CXXCPP="g++ -E" - - This is not guaranteed to produce working output in all cases, you -may have to build one architecture at a time and combine the results -using the `lipo' tool if you have problems. - -Installation Names -================== - - By default, `make install' installs the package's commands under -`/usr/local/bin', include files under `/usr/local/include', etc. You -can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX', where PREFIX must be an -absolute file name. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -pass the option `--exec-prefix=PREFIX' to `configure', the package uses -PREFIX as the prefix for installing programs and libraries. -Documentation and other data files still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=DIR' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. In general, the -default for these options is expressed in terms of `${prefix}', so that -specifying just `--prefix' will affect all of the other directory -specifications that were not explicitly provided. - - The most portable way to affect installation locations is to pass the -correct locations to `configure'; however, many packages provide one or -both of the following shortcuts of passing variable assignments to the -`make install' command line to change installation locations without -having to reconfigure or recompile. - - The first method involves providing an override variable for each -affected directory. For example, `make install -prefix=/alternate/directory' will choose an alternate location for all -directory configuration variables that were expressed in terms of -`${prefix}'. Any directories that were specified during `configure', -but not in terms of `${prefix}', must each be overridden at install -time for the entire installation to be relocated. The approach of -makefile variable overrides for each directory variable is required by -the GNU Coding Standards, and ideally causes no recompilation. -However, some platforms have known limitations with the semantics of -shared libraries that end up requiring recompilation when using this -method, particularly noticeable in packages that use GNU Libtool. - - The second method involves providing the `DESTDIR' variable. For -example, `make install DESTDIR=/alternate/directory' will prepend -`/alternate/directory' before all installation names. The approach of -`DESTDIR' overrides is not required by the GNU Coding Standards, and -does not work on platforms that have drive letters. On the other hand, -it does better at avoiding recompilation issues, and works well even -when some directory options were not specified in terms of `${prefix}' -at `configure' time. - -Optional Features -================= - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - - Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - - Some packages offer the ability to configure how verbose the -execution of `make' will be. For these packages, running `./configure ---enable-silent-rules' sets the default to minimal output, which can be -overridden with `make V=1'; while running `./configure ---disable-silent-rules' sets the default to verbose, which can be -overridden with `make V=0'. - -Particular systems -================== - - On HP-UX, the default C compiler is not ANSI C compatible. If GNU -CC is not installed, it is recommended to use the following options in -order to use an ANSI C compiler: - - ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" - -and if that doesn't work, install pre-built binaries of GCC for HP-UX. - - HP-UX `make' updates targets which have the same time stamps as -their prerequisites, which makes it generally unusable when shipped -generated files such as `configure' are involved. Use GNU `make' -instead. - - On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot -parse its `<wchar.h>' header file. The option `-nodtk' can be used as -a workaround. If GNU CC is not installed, it is therefore recommended -to try - - ./configure CC="cc" - -and if that doesn't work, try - - ./configure CC="cc -nodtk" - - On Solaris, don't put `/usr/ucb' early in your `PATH'. This -directory contains several dysfunctional programs; working variants of -these programs are available in `/usr/bin'. So, if you need `/usr/ucb' -in your `PATH', put it _after_ `/usr/bin'. - - On Haiku, software installed for all users goes in `/boot/common', -not `/usr/local'. It is recommended to use the following options: - - ./configure --prefix=/boot/common - -Specifying the System Type -========================== - - There may be some features `configure' cannot figure out -automatically, but needs to determine by the type of machine the package -will run on. Usually, assuming the package is built to be run on the -_same_ architectures, `configure' can figure that out, but if it prints -a message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS - KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the option `--target=TYPE' to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - - Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). - -Unfortunately, this technique does not work for `CONFIG_SHELL' due to -an Autoconf bug. Until the bug is fixed you can use this workaround: - - CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash - -`configure' Invocation -====================== - - `configure' recognizes the following options to control how it -operates. - -`--help' -`-h' - Print a summary of all of the options to `configure', and exit. - -`--help=short' -`--help=recursive' - Print a summary of the options unique to this package's - `configure', and exit. The `short' variant lists options used - only in the top level, while the `recursive' variant lists options - also present in any nested packages. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`--prefix=DIR' - Use DIR as the installation prefix. *note Installation Names:: - for more details, including other options available for fine-tuning - the installation locations. - -`--no-create' -`-n' - Run the configure checks, but stop before creating any output - files. - -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. - diff --git a/ext/fputils/Makefile.am b/ext/fputils/Makefile.am deleted file mode 100644 index c8aaac410..000000000 --- a/ext/fputils/Makefile.am +++ /dev/null @@ -1,25 +0,0 @@ -ACLOCAL_AMFLAGS=-I m4 - -SUBDIRS=. tests - -MOSTLYCLEANFILES= - -lib_LTLIBRARIES = libfputils.la - -include_HEADERS = \ - include/fputils/fp80.h \ - include/fputils/fp64.h \ - include/fputils/fptypes.h - -libfputils_la_SOURCES = \ - include/fputils/fp80.h \ - include/fputils/fp64.h \ - include/fputils/fptypes.h \ - fpbits.h \ - fp64.c \ - fp80.c - - -include $(top_srcdir)/doxygen.am - -MOSTLYCLEANFILES += $(DX_CLEANFILES) diff --git a/ext/fputils/configure.ac b/ext/fputils/configure.ac deleted file mode 100644 index 35cade885..000000000 --- a/ext/fputils/configure.ac +++ /dev/null @@ -1,36 +0,0 @@ -AC_INIT(libfputils, 1.0, andreas@sandberg.pp.se) - -AC_CONFIG_MACRO_DIR([m4]) - -AM_INIT_AUTOMAKE([foreign -Wall]) - -DX_PDF_FEATURE(OFF) -DX_PS_FEATURE(OFF) -DX_MAN_FEATURE(OFF) -DX_INIT_DOXYGEN([libfputils]) - -AC_REQUIRE_AUX_FILE([tap-driver.sh]) - -AC_PROG_CC -AC_PROG_CC_C99 -AC_PROG_LIBTOOL -AC_PROG_AWK - -if test "x$ac_cv_prog_cc_c99" = "xno"; then - AC_MSG_ERROR([Could not enable C99 support in compiler.]) -fi - -AM_CFLAGS="-Wall -Werror" -AM_CPPFLAGS="-I\$(abs_top_srcdir)/include" - -AC_SUBST(AM_CFLAGS) -AC_SUBST(AM_CPPFLAGS) - -AC_CONFIG_HEADERS([config.h]) - -AC_CONFIG_FILES([ \ - Doxyfile \ - Makefile \ - tests/Makefile \ -]) -AC_OUTPUT diff --git a/ext/fputils/doxygen.am b/ext/fputils/doxygen.am deleted file mode 100644 index 472de63b0..000000000 --- a/ext/fputils/doxygen.am +++ /dev/null @@ -1,105 +0,0 @@ -## --------------------------------- ## -## Format-independent Doxygen rules. ## -## --------------------------------- ## -if DX_COND_doc -## ------------------------------- ## -## Rules specific for HTML output. ## -## ------------------------------- ## -if DX_COND_html -DX_CLEAN_HTML = @DX_DOCDIR@/html -endif DX_COND_html -## ------------------------------ ## -## Rules specific for CHM output. ## -## ------------------------------ ## -if DX_COND_chm -DX_CLEAN_CHM = @DX_DOCDIR@/chm -if DX_COND_chi -DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi -endif DX_COND_chi -endif DX_COND_chm -## ------------------------------ ## -## Rules specific for MAN output. ## -## ------------------------------ ## -if DX_COND_man -DX_CLEAN_MAN = @DX_DOCDIR@/man -endif DX_COND_man -## ------------------------------ ## -## Rules specific for RTF output. ## -## ------------------------------ ## -if DX_COND_rtf -DX_CLEAN_RTF = @DX_DOCDIR@/rtf -endif DX_COND_rtf -## ------------------------------ ## -## Rules specific for XML output. ## -## ------------------------------ ## -if DX_COND_xml -DX_CLEAN_XML = @DX_DOCDIR@/xml -endif DX_COND_xml -## ----------------------------- ## -## Rules specific for PS output. ## -## ----------------------------- ## -if DX_COND_ps -DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps -DX_PS_GOAL = doxygen-ps -doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps -@DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag - cd @DX_DOCDIR@/latex; \ - rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ - $(DX_LATEX) refman.tex; \ - $(MAKEINDEX_PATH) refman.idx; \ - $(DX_LATEX) refman.tex; \ - countdown=5; \ - while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ - refman.log > /dev/null 2>&1 && test $$countdown -gt 0; do \ - $(DX_LATEX) refman.tex; \ - countdown=`expr $$countdown - 1`; \ - done; \ - $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi -endif DX_COND_ps -## ------------------------------ ## -## Rules specific for PDF output. ## -## ------------------------------ ## -if DX_COND_pdf -DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf -DX_PDF_GOAL = doxygen-pdf -doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf -@DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag - cd @DX_DOCDIR@/latex; \ - rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ - $(DX_PDFLATEX) refman.tex; \ - $(DX_MAKEINDEX) refman.idx; \ - $(DX_PDFLATEX) refman.tex; \ - countdown=5; \ - while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ - refman.log > /dev/null 2>&1 && test $$countdown -gt 0; do \ - $(DX_PDFLATEX) refman.tex; \ - countdown=`expr $$countdown - 1`; \ - done; \ - mv refman.pdf ../@PACKAGE@.pdf -endif DX_COND_pdf -## ------------------------------------------------- ## -## Rules specific for LaTeX (shared for PS and PDF). ## -## ------------------------------------------------- ## -if DX_COND_latex -DX_CLEAN_LATEX = @DX_DOCDIR@/latex -endif DX_COND_latex -.PHONY: doxygen-run doxygen-doc $(DX_PS_GOAL) $(DX_PDF_GOAL) -.INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) -doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag -doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) -@DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS) - rm -rf @DX_DOCDIR@ - $(DX_ENV) $(DX_DOXYGEN) $(srcdir)/$(DX_CONFIG) -DX_CLEANFILES = \ - @DX_DOCDIR@/@PACKAGE@.tag \ - -r \ - $(DX_CLEAN_HTML) \ - $(DX_CLEAN_CHM) \ - $(DX_CLEAN_CHI) \ - $(DX_CLEAN_MAN) \ - $(DX_CLEAN_RTF) \ - $(DX_CLEAN_XML) \ - $(DX_CLEAN_PS) \ - $(DX_CLEAN_PDF) \ - $(DX_CLEAN_LATEX) -endif DX_COND_doc diff --git a/ext/fputils/m4/ax_prog_doxygen.m4 b/ext/fputils/m4/ax_prog_doxygen.m4 deleted file mode 100644 index 44b22b00a..000000000 --- a/ext/fputils/m4/ax_prog_doxygen.m4 +++ /dev/null @@ -1,532 +0,0 @@ -# =========================================================================== -# http://www.gnu.org/software/autoconf-archive/ax_prog_doxygen.html -# =========================================================================== -# -# SYNOPSIS -# -# DX_INIT_DOXYGEN(PROJECT-NAME, DOXYFILE-PATH, [OUTPUT-DIR]) -# DX_DOXYGEN_FEATURE(ON|OFF) -# DX_DOT_FEATURE(ON|OFF) -# DX_HTML_FEATURE(ON|OFF) -# DX_CHM_FEATURE(ON|OFF) -# DX_CHI_FEATURE(ON|OFF) -# DX_MAN_FEATURE(ON|OFF) -# DX_RTF_FEATURE(ON|OFF) -# DX_XML_FEATURE(ON|OFF) -# DX_PDF_FEATURE(ON|OFF) -# DX_PS_FEATURE(ON|OFF) -# -# DESCRIPTION -# -# The DX_*_FEATURE macros control the default setting for the given -# Doxygen feature. Supported features are 'DOXYGEN' itself, 'DOT' for -# generating graphics, 'HTML' for plain HTML, 'CHM' for compressed HTML -# help (for MS users), 'CHI' for generating a seperate .chi file by the -# .chm file, and 'MAN', 'RTF', 'XML', 'PDF' and 'PS' for the appropriate -# output formats. The environment variable DOXYGEN_PAPER_SIZE may be -# specified to override the default 'a4wide' paper size. -# -# By default, HTML, PDF and PS documentation is generated as this seems to -# be the most popular and portable combination. MAN pages created by -# Doxygen are usually problematic, though by picking an appropriate subset -# and doing some massaging they might be better than nothing. CHM and RTF -# are specific for MS (note that you can't generate both HTML and CHM at -# the same time). The XML is rather useless unless you apply specialized -# post-processing to it. -# -# The macros mainly control the default state of the feature. The use can -# override the default by specifying --enable or --disable. The macros -# ensure that contradictory flags are not given (e.g., -# --enable-doxygen-html and --enable-doxygen-chm, -# --enable-doxygen-anything with --disable-doxygen, etc.) Finally, each -# feature will be automatically disabled (with a warning) if the required -# programs are missing. -# -# Once all the feature defaults have been specified, call DX_INIT_DOXYGEN -# with the following parameters: a one-word name for the project for use -# as a filename base etc., an optional configuration file name (the -# default is 'Doxyfile', the same as Doxygen's default), and an optional -# output directory name (the default is 'doxygen-doc'). -# -# Automake Support -# -# The following is a template aminclude.am file for use with Automake. -# Make targets and variables values are controlled by the various -# DX_COND_* conditionals set by autoconf. -# -# The provided targets are: -# -# doxygen-doc: Generate all doxygen documentation. -# -# doxygen-run: Run doxygen, which will generate some of the -# documentation (HTML, CHM, CHI, MAN, RTF, XML) -# but will not do the post processing required -# for the rest of it (PS, PDF, and some MAN). -# -# doxygen-man: Rename some doxygen generated man pages. -# -# doxygen-ps: Generate doxygen PostScript documentation. -# -# doxygen-pdf: Generate doxygen PDF documentation. -# -# Note that by default these are not integrated into the automake targets. -# If doxygen is used to generate man pages, you can achieve this -# integration by setting man3_MANS to the list of man pages generated and -# then adding the dependency: -# -# $(man3_MANS): doxygen-doc -# -# This will cause make to run doxygen and generate all the documentation. -# -# The following variable is intended for use in Makefile.am: -# -# DX_CLEANFILES = everything to clean. -# -# Then add this variable to MOSTLYCLEANFILES. -# -# ----- begin aminclude.am ------------------------------------- -# -# ## --------------------------------- ## -# ## Format-independent Doxygen rules. ## -# ## --------------------------------- ## -# -# if DX_COND_doc -# -# ## ------------------------------- ## -# ## Rules specific for HTML output. ## -# ## ------------------------------- ## -# -# if DX_COND_html -# -# DX_CLEAN_HTML = @DX_DOCDIR@/html -# -# endif DX_COND_html -# -# ## ------------------------------ ## -# ## Rules specific for CHM output. ## -# ## ------------------------------ ## -# -# if DX_COND_chm -# -# DX_CLEAN_CHM = @DX_DOCDIR@/chm -# -# if DX_COND_chi -# -# DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi -# -# endif DX_COND_chi -# -# endif DX_COND_chm -# -# ## ------------------------------ ## -# ## Rules specific for MAN output. ## -# ## ------------------------------ ## -# -# if DX_COND_man -# -# DX_CLEAN_MAN = @DX_DOCDIR@/man -# -# endif DX_COND_man -# -# ## ------------------------------ ## -# ## Rules specific for RTF output. ## -# ## ------------------------------ ## -# -# if DX_COND_rtf -# -# DX_CLEAN_RTF = @DX_DOCDIR@/rtf -# -# endif DX_COND_rtf -# -# ## ------------------------------ ## -# ## Rules specific for XML output. ## -# ## ------------------------------ ## -# -# if DX_COND_xml -# -# DX_CLEAN_XML = @DX_DOCDIR@/xml -# -# endif DX_COND_xml -# -# ## ----------------------------- ## -# ## Rules specific for PS output. ## -# ## ----------------------------- ## -# -# if DX_COND_ps -# -# DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps -# -# DX_PS_GOAL = doxygen-ps -# -# doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps -# -# @DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag -# cd @DX_DOCDIR@/latex; \ -# rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ -# $(DX_LATEX) refman.tex; \ -# $(MAKEINDEX_PATH) refman.idx; \ -# $(DX_LATEX) refman.tex; \ -# countdown=5; \ -# while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ -# refman.log > /dev/null 2>&1 \ -# && test $$countdown -gt 0; do \ -# $(DX_LATEX) refman.tex; \ -# countdown=`expr $$countdown - 1`; \ -# done; \ -# $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi -# -# endif DX_COND_ps -# -# ## ------------------------------ ## -# ## Rules specific for PDF output. ## -# ## ------------------------------ ## -# -# if DX_COND_pdf -# -# DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf -# -# DX_PDF_GOAL = doxygen-pdf -# -# doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf -# -# @DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag -# cd @DX_DOCDIR@/latex; \ -# rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ -# $(DX_PDFLATEX) refman.tex; \ -# $(DX_MAKEINDEX) refman.idx; \ -# $(DX_PDFLATEX) refman.tex; \ -# countdown=5; \ -# while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ -# refman.log > /dev/null 2>&1 \ -# && test $$countdown -gt 0; do \ -# $(DX_PDFLATEX) refman.tex; \ -# countdown=`expr $$countdown - 1`; \ -# done; \ -# mv refman.pdf ../@PACKAGE@.pdf -# -# endif DX_COND_pdf -# -# ## ------------------------------------------------- ## -# ## Rules specific for LaTeX (shared for PS and PDF). ## -# ## ------------------------------------------------- ## -# -# if DX_COND_latex -# -# DX_CLEAN_LATEX = @DX_DOCDIR@/latex -# -# endif DX_COND_latex -# -# .PHONY: doxygen-run doxygen-doc $(DX_PS_GOAL) $(DX_PDF_GOAL) -# -# .INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) -# -# doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag -# -# doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) -# -# @DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS) -# rm -rf @DX_DOCDIR@ -# $(DX_ENV) $(DX_DOXYGEN) $(srcdir)/$(DX_CONFIG) -# -# DX_CLEANFILES = \ -# @DX_DOCDIR@/@PACKAGE@.tag \ -# -r \ -# $(DX_CLEAN_HTML) \ -# $(DX_CLEAN_CHM) \ -# $(DX_CLEAN_CHI) \ -# $(DX_CLEAN_MAN) \ -# $(DX_CLEAN_RTF) \ -# $(DX_CLEAN_XML) \ -# $(DX_CLEAN_PS) \ -# $(DX_CLEAN_PDF) \ -# $(DX_CLEAN_LATEX) -# -# endif DX_COND_doc -# -# ----- end aminclude.am --------------------------------------- -# -# LICENSE -# -# Copyright (c) 2009 Oren Ben-Kiki <oren@ben-kiki.org> -# -# Copying and distribution of this file, with or without modification, are -# permitted in any medium without royalty provided the copyright notice -# and this notice are preserved. This file is offered as-is, without any -# warranty. - -#serial 12 - -## ----------## -## Defaults. ## -## ----------## - -DX_ENV="" -AC_DEFUN([DX_FEATURE_doc], ON) -AC_DEFUN([DX_FEATURE_dot], OFF) -AC_DEFUN([DX_FEATURE_man], OFF) -AC_DEFUN([DX_FEATURE_html], ON) -AC_DEFUN([DX_FEATURE_chm], OFF) -AC_DEFUN([DX_FEATURE_chi], OFF) -AC_DEFUN([DX_FEATURE_rtf], OFF) -AC_DEFUN([DX_FEATURE_xml], OFF) -AC_DEFUN([DX_FEATURE_pdf], ON) -AC_DEFUN([DX_FEATURE_ps], ON) - -## --------------- ## -## Private macros. ## -## --------------- ## - -# DX_ENV_APPEND(VARIABLE, VALUE) -# ------------------------------ -# Append VARIABLE="VALUE" to DX_ENV for invoking doxygen. -AC_DEFUN([DX_ENV_APPEND], [AC_SUBST([DX_ENV], ["$DX_ENV $1='$2'"])]) - -# DX_DIRNAME_EXPR -# --------------- -# Expand into a shell expression prints the directory part of a path. -AC_DEFUN([DX_DIRNAME_EXPR], - [[expr ".$1" : '\(\.\)[^/]*$' \| "x$1" : 'x\(.*\)/[^/]*$']]) - -# DX_IF_FEATURE(FEATURE, IF-ON, IF-OFF) -# ------------------------------------- -# Expands according to the M4 (static) status of the feature. -AC_DEFUN([DX_IF_FEATURE], [ifelse(DX_FEATURE_$1, ON, [$2], [$3])]) - -# DX_REQUIRE_PROG(VARIABLE, PROGRAM) -# ---------------------------------- -# Require the specified program to be found for the DX_CURRENT_FEATURE to work. -AC_DEFUN([DX_REQUIRE_PROG], [ -AC_PATH_TOOL([$1], [$2]) -if test "$DX_FLAG_[]DX_CURRENT_FEATURE$$1" = 1; then - AC_MSG_WARN([$2 not found - will not DX_CURRENT_DESCRIPTION]) - AC_SUBST(DX_FLAG_[]DX_CURRENT_FEATURE, 0) -fi -]) - -# DX_TEST_FEATURE(FEATURE) -# ------------------------ -# Expand to a shell expression testing whether the feature is active. -AC_DEFUN([DX_TEST_FEATURE], [test "$DX_FLAG_$1" = 1]) - -# DX_CHECK_DEPEND(REQUIRED_FEATURE, REQUIRED_STATE) -# ------------------------------------------------- -# Verify that a required features has the right state before trying to turn on -# the DX_CURRENT_FEATURE. -AC_DEFUN([DX_CHECK_DEPEND], [ -test "$DX_FLAG_$1" = "$2" \ -|| AC_MSG_ERROR([doxygen-DX_CURRENT_FEATURE ifelse([$2], 1, - requires, contradicts) doxygen-DX_CURRENT_FEATURE]) -]) - -# DX_CLEAR_DEPEND(FEATURE, REQUIRED_FEATURE, REQUIRED_STATE) -# ---------------------------------------------------------- -# Turn off the DX_CURRENT_FEATURE if the required feature is off. -AC_DEFUN([DX_CLEAR_DEPEND], [ -test "$DX_FLAG_$1" = "$2" || AC_SUBST(DX_FLAG_[]DX_CURRENT_FEATURE, 0) -]) - -# DX_FEATURE_ARG(FEATURE, DESCRIPTION, -# CHECK_DEPEND, CLEAR_DEPEND, -# REQUIRE, DO-IF-ON, DO-IF-OFF) -# -------------------------------------------- -# Parse the command-line option controlling a feature. CHECK_DEPEND is called -# if the user explicitly turns the feature on (and invokes DX_CHECK_DEPEND), -# otherwise CLEAR_DEPEND is called to turn off the default state if a required -# feature is disabled (using DX_CLEAR_DEPEND). REQUIRE performs additional -# requirement tests (DX_REQUIRE_PROG). Finally, an automake flag is set and -# DO-IF-ON or DO-IF-OFF are called according to the final state of the feature. -AC_DEFUN([DX_ARG_ABLE], [ - AC_DEFUN([DX_CURRENT_FEATURE], [$1]) - AC_DEFUN([DX_CURRENT_DESCRIPTION], [$2]) - AC_ARG_ENABLE(doxygen-$1, - [AS_HELP_STRING(DX_IF_FEATURE([$1], [--disable-doxygen-$1], - [--enable-doxygen-$1]), - DX_IF_FEATURE([$1], [don't $2], [$2]))], - [ -case "$enableval" in -#( -y|Y|yes|Yes|YES) - AC_SUBST([DX_FLAG_$1], 1) - $3 -;; #( -n|N|no|No|NO) - AC_SUBST([DX_FLAG_$1], 0) -;; #( -*) - AC_MSG_ERROR([invalid value '$enableval' given to doxygen-$1]) -;; -esac -], [ -AC_SUBST([DX_FLAG_$1], [DX_IF_FEATURE([$1], 1, 0)]) -$4 -]) -if DX_TEST_FEATURE([$1]); then - $5 - : -fi -AM_CONDITIONAL(DX_COND_$1, DX_TEST_FEATURE([$1])) -if DX_TEST_FEATURE([$1]); then - $6 - : -else - $7 - : -fi -]) - -## -------------- ## -## Public macros. ## -## -------------- ## - -# DX_XXX_FEATURE(DEFAULT_STATE) -# ----------------------------- -AC_DEFUN([DX_DOXYGEN_FEATURE], [AC_DEFUN([DX_FEATURE_doc], [$1])]) -AC_DEFUN([DX_DOT_FEATURE], [AC_DEFUN([DX_FEATURE_dot], [$1])]) -AC_DEFUN([DX_MAN_FEATURE], [AC_DEFUN([DX_FEATURE_man], [$1])]) -AC_DEFUN([DX_HTML_FEATURE], [AC_DEFUN([DX_FEATURE_html], [$1])]) -AC_DEFUN([DX_CHM_FEATURE], [AC_DEFUN([DX_FEATURE_chm], [$1])]) -AC_DEFUN([DX_CHI_FEATURE], [AC_DEFUN([DX_FEATURE_chi], [$1])]) -AC_DEFUN([DX_RTF_FEATURE], [AC_DEFUN([DX_FEATURE_rtf], [$1])]) -AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])]) -AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])]) -AC_DEFUN([DX_PDF_FEATURE], [AC_DEFUN([DX_FEATURE_pdf], [$1])]) -AC_DEFUN([DX_PS_FEATURE], [AC_DEFUN([DX_FEATURE_ps], [$1])]) - -# DX_INIT_DOXYGEN(PROJECT, [CONFIG-FILE], [OUTPUT-DOC-DIR]) -# --------------------------------------------------------- -# PROJECT also serves as the base name for the documentation files. -# The default CONFIG-FILE is "Doxyfile" and OUTPUT-DOC-DIR is "doxygen-doc". -AC_DEFUN([DX_INIT_DOXYGEN], [ - -# Files: -AC_SUBST([DX_PROJECT], [$1]) -AC_SUBST([DX_CONFIG], [ifelse([$2], [], Doxyfile, [$2])]) -AC_SUBST([DX_DOCDIR], [ifelse([$3], [], doxygen-doc, [$3])]) - -# Environment variables used inside doxygen.cfg: -DX_ENV_APPEND(SRCDIR, $srcdir) -DX_ENV_APPEND(PROJECT, $DX_PROJECT) -DX_ENV_APPEND(DOCDIR, $DX_DOCDIR) -DX_ENV_APPEND(VERSION, $PACKAGE_VERSION) - -# Doxygen itself: -DX_ARG_ABLE(doc, [generate any doxygen documentation], - [], - [], - [DX_REQUIRE_PROG([DX_DOXYGEN], doxygen) - DX_REQUIRE_PROG([DX_PERL], perl)], - [DX_ENV_APPEND(PERL_PATH, $DX_PERL)]) - -# Dot for graphics: -DX_ARG_ABLE(dot, [generate graphics for doxygen documentation], - [DX_CHECK_DEPEND(doc, 1)], - [DX_CLEAR_DEPEND(doc, 1)], - [DX_REQUIRE_PROG([DX_DOT], dot)], - [DX_ENV_APPEND(HAVE_DOT, YES) - DX_ENV_APPEND(DOT_PATH, [`DX_DIRNAME_EXPR($DX_DOT)`])], - [DX_ENV_APPEND(HAVE_DOT, NO)]) - -# Man pages generation: -DX_ARG_ABLE(man, [generate doxygen manual pages], - [DX_CHECK_DEPEND(doc, 1)], - [DX_CLEAR_DEPEND(doc, 1)], - [], - [DX_ENV_APPEND(GENERATE_MAN, YES)], - [DX_ENV_APPEND(GENERATE_MAN, NO)]) - -# RTF file generation: -DX_ARG_ABLE(rtf, [generate doxygen RTF documentation], - [DX_CHECK_DEPEND(doc, 1)], - [DX_CLEAR_DEPEND(doc, 1)], - [], - [DX_ENV_APPEND(GENERATE_RTF, YES)], - [DX_ENV_APPEND(GENERATE_RTF, NO)]) - -# XML file generation: -DX_ARG_ABLE(xml, [generate doxygen XML documentation], - [DX_CHECK_DEPEND(doc, 1)], - [DX_CLEAR_DEPEND(doc, 1)], - [], - [DX_ENV_APPEND(GENERATE_XML, YES)], - [DX_ENV_APPEND(GENERATE_XML, NO)]) - -# (Compressed) HTML help generation: -DX_ARG_ABLE(chm, [generate doxygen compressed HTML help documentation], - [DX_CHECK_DEPEND(doc, 1)], - [DX_CLEAR_DEPEND(doc, 1)], - [DX_REQUIRE_PROG([DX_HHC], hhc)], - [DX_ENV_APPEND(HHC_PATH, $DX_HHC) - DX_ENV_APPEND(GENERATE_HTML, YES) - DX_ENV_APPEND(GENERATE_HTMLHELP, YES)], - [DX_ENV_APPEND(GENERATE_HTMLHELP, NO)]) - -# Seperate CHI file generation. -DX_ARG_ABLE(chi, [generate doxygen seperate compressed HTML help index file], - [DX_CHECK_DEPEND(chm, 1)], - [DX_CLEAR_DEPEND(chm, 1)], - [], - [DX_ENV_APPEND(GENERATE_CHI, YES)], - [DX_ENV_APPEND(GENERATE_CHI, NO)]) - -# Plain HTML pages generation: -DX_ARG_ABLE(html, [generate doxygen plain HTML documentation], - [DX_CHECK_DEPEND(doc, 1) DX_CHECK_DEPEND(chm, 0)], - [DX_CLEAR_DEPEND(doc, 1) DX_CLEAR_DEPEND(chm, 0)], - [], - [DX_ENV_APPEND(GENERATE_HTML, YES)], - [DX_TEST_FEATURE(chm) || DX_ENV_APPEND(GENERATE_HTML, NO)]) - -# PostScript file generation: -DX_ARG_ABLE(ps, [generate doxygen PostScript documentation], - [DX_CHECK_DEPEND(doc, 1)], - [DX_CLEAR_DEPEND(doc, 1)], - [DX_REQUIRE_PROG([DX_LATEX], latex) - DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex) - DX_REQUIRE_PROG([DX_DVIPS], dvips) - DX_REQUIRE_PROG([DX_EGREP], egrep)]) - -# PDF file generation: -DX_ARG_ABLE(pdf, [generate doxygen PDF documentation], - [DX_CHECK_DEPEND(doc, 1)], - [DX_CLEAR_DEPEND(doc, 1)], - [DX_REQUIRE_PROG([DX_PDFLATEX], pdflatex) - DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex) - DX_REQUIRE_PROG([DX_EGREP], egrep)]) - -# LaTeX generation for PS and/or PDF: -AM_CONDITIONAL(DX_COND_latex, DX_TEST_FEATURE(ps) || DX_TEST_FEATURE(pdf)) -if DX_TEST_FEATURE(ps) || DX_TEST_FEATURE(pdf); then - DX_ENV_APPEND(GENERATE_LATEX, YES) -else - DX_ENV_APPEND(GENERATE_LATEX, NO) -fi - -# Paper size for PS and/or PDF: -AC_ARG_VAR(DOXYGEN_PAPER_SIZE, - [a4wide (default), a4, letter, legal or executive]) -case "$DOXYGEN_PAPER_SIZE" in -#( -"") - AC_SUBST(DOXYGEN_PAPER_SIZE, "") -;; #( -a4wide|a4|letter|legal|executive) - DX_ENV_APPEND(PAPER_SIZE, $DOXYGEN_PAPER_SIZE) -;; #( -*) - AC_MSG_ERROR([unknown DOXYGEN_PAPER_SIZE='$DOXYGEN_PAPER_SIZE']) -;; -esac - -#For debugging: -#echo DX_FLAG_doc=$DX_FLAG_doc -#echo DX_FLAG_dot=$DX_FLAG_dot -#echo DX_FLAG_man=$DX_FLAG_man -#echo DX_FLAG_html=$DX_FLAG_html -#echo DX_FLAG_chm=$DX_FLAG_chm -#echo DX_FLAG_chi=$DX_FLAG_chi -#echo DX_FLAG_rtf=$DX_FLAG_rtf -#echo DX_FLAG_xml=$DX_FLAG_xml -#echo DX_FLAG_pdf=$DX_FLAG_pdf -#echo DX_FLAG_ps=$DX_FLAG_ps -#echo DX_ENV=$DX_ENV -]) diff --git a/ext/fputils/tests/Makefile.am b/ext/fputils/tests/Makefile.am deleted file mode 100644 index 6faffead2..000000000 --- a/ext/fputils/tests/Makefile.am +++ /dev/null @@ -1,13 +0,0 @@ - -TEST_LOG_DRIVER = env AM_TAP_AWK='$(AWK)' $(SHELL) \ - $(top_srcdir)/tap-driver.sh - -LIBS=-lm $(top_builddir)/.libs/libfputils.la libtest.a - -FP80_TESTS=fp80_cvtd fp80_cvfd fp80_cvtf -TESTS=$(FP80_TESTS) - -check_LIBRARIES=libtest.a -check_PROGRAMS=$(FP80_TESTS) - -libtest_a_SOURCES=test_helper.c test_helper.h diff --git a/ext/fputils/tests/test_helper.c b/ext/fputils/tests/test_helper.c deleted file mode 100644 index b8181c84c..000000000 --- a/ext/fputils/tests/test_helper.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * Copyright (c) 2013 Andreas Sandberg - * All rights reserved - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer; - * redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution; - * neither the name of the copyright holders nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Authors: Andreas Sandberg - */ - -#include "test_helper.h" - -#include <assert.h> -#include <stdarg.h> -#include <stdlib.h> - -unsigned test_current = 0; -unsigned test_count = 0; -unsigned test_fail_count = 0; - -void -test_init(unsigned no_tests) -{ - assert(test_count == 0 && test_current == 0); - - test_count = no_tests; - test_current = 1; - test_fail_count = 0; - - printf("1..%u\n", no_tests); -} - -void -test_exit() -{ - if (test_fail_count) - exit(EXIT_FAILURE); - else - exit(EXIT_SUCCESS); -} - -void -test_bail(const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - - printf("Bail out! "); - vprintf(fmt, ap); - printf("\n"); - - va_end(ap); - - exit(EXIT_FAILURE); -} - -void -test_diag(const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - - printf("# "); - vprintf(fmt, ap); - printf("\n"); - - va_end(ap); -} - -static void -test_vstatus(const char *status, const char *test, - const char *directive, - const char *fmt_why, va_list ap) -{ - printf("%s %i", status, test_current); - - if (test && test[0] != '\0') - printf(" - %s", test); - - if (directive && directive[0] != '\0') { - printf(" # %s ", directive); - if (fmt_why && fmt_why[0] != '\0') - vprintf(fmt_why, ap); - } - printf("\n"); - - ++test_current; -} - -static void __attribute__((format (printf, 4, 5))) -test_status(const char *status, const char *test, - const char *directive, - const char *fmt_why, ...) -{ - va_list ap; - va_start(ap, fmt_why); - - test_vstatus(status, test, directive, fmt_why, ap); - - va_end(ap); -} - -void -test_ok(const char *test) -{ - test_status("ok", test, NULL, NULL); -} - -void -test_fail(const char *test) -{ - test_status("not ok", test, NULL, NULL); - ++test_fail_count; -} - -void -test_skip(const char *test, const char *fmt_why, ...) -{ - va_list ap; - va_start(ap, fmt_why); - - test_vstatus("ok", test, "SKIP", fmt_why, ap); - - va_end(ap); -} - -void -test_todo(const char *test, const char *fmt_why, ...) -{ - va_list ap; - va_start(ap, fmt_why); - - test_vstatus("not ok", test, "TODO", fmt_why, ap); - - va_end(ap); - - ++test_fail_count; -} diff --git a/ext/fputils/tests/test_helper.h b/ext/fputils/tests/test_helper.h deleted file mode 100644 index 6565a9f37..000000000 --- a/ext/fputils/tests/test_helper.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (c) 2013 Andreas Sandberg - * All rights reserved - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer; - * redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution; - * neither the name of the copyright holders nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Authors: Andreas Sandberg - */ - -#ifndef _TEST_HELPER -#define _TEST_HELPER 1 - -#include <stdio.h> - -extern unsigned test_current; -extern unsigned test_count; -extern unsigned test_fail_count; - -void test_init(unsigned no_tests); -void test_exit() - __attribute__((noreturn)); - -void test_bail(const char *fmt, ...) - __attribute__((format (printf, 1, 2), noreturn)); - -void test_diag(const char *fmt, ...) - __attribute__((format (printf, 1, 2))); - -void test_ok(const char *test); - -void test_fail(const char *test); - -void test_skip(const char *test, const char *fmt_why, ...) - __attribute__((format (printf, 2, 3))); - -void test_todo(const char *test, const char *fmt_why, ...) - __attribute__((format (printf, 2, 3))); - -#endif |