ext: Replace gzstream with iostream3 from zlib to avoid LGPL

This patch replaces the gzstream zlib wrapper with the iostream3
wrapper provided as part of zlib contributions. The main reason for
the switch is to avoid including LGPL in the default gem5
build. iostream3 is provided under a more permissive license:

The code is provided "as is", with the permission to use, copy,
modify, distribute and sell it for any purpose without fee.

6 files changed, 1093 insertions, 0 deletions

diff --git a/ext/iostream3/README b/ext/iostream3/README
new file mode 100644
index 000000000..f7b319ab9
--- /dev/null
+++ b/ext/iostream3/README
@@ -0,0 +1,35 @@
+These classes provide a C++ stream interface to the zlib library. It allows you
+to do things like:
+
+  gzofstream outf("blah.gz");
+  outf << "These go into the gzip file " << 123 << endl;
+
+It does this by deriving a specialized stream buffer for gzipped files, which is
+the way Stroustrup would have done it. :->
+
+The gzifstream and gzofstream classes were originally written by Kevin Ruland
+and made available in the zlib contrib/iostream directory. The older version still
+compiles under gcc 2.xx, but not under gcc 3.xx, which sparked the development of
+this version.
+
+The new classes are as standard-compliant as possible, closely following the
+approach of the standard library's fstream classes. It compiles under gcc versions
+3.2 and 3.3, but not under gcc 2.xx. This is mainly due to changes in the standard
+library naming scheme. The new version of gzifstream/gzofstream/gzfilebuf differs
+from the previous one in the following respects:
+- added showmanyc
+- added setbuf, with support for unbuffered output via setbuf(0,0)
+- a few bug fixes of stream behavior
+- gzipped output file opened with default compression level instead of maximum level
+- setcompressionlevel()/strategy() members replaced by single setcompression()
+
+The code is provided "as is", with the permission to use, copy, modify, distribute
+and sell it for any purpose without fee.
+
+Ludwig Schwardt
+<schwardt@sun.ac.za>
+
+DSP Lab
+Electrical & Electronic Engineering Department
+University of Stellenbosch
+South Africa
diff --git a/ext/iostream3/SConscript b/ext/iostream3/SConscript
new file mode 100644
index 000000000..f8b5461a2
--- /dev/null
+++ b/ext/iostream3/SConscript
@@ -0,0 +1,46 @@
+# -*- mode:python -*-
+
+# Copyright (c) 2015 ARM Limited
+# All rights reserved.
+#
+# The license below extends only to copyright in the software and shall
+# not be construed as granting a license to any other intellectual
+# property including but not limited to intellectual property relating
+# to a hardware implementation of the functionality of the software
+# licensed hereunder.  You may use the software subject to the license
+# terms below provided that you ensure that this notice is replicated
+# unmodified and in its entirety in all distributions of the software,
+# modified or unmodified, in source code or in binary form.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met: redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer;
+# redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution;
+# neither the name of the copyright holders nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Authors: Andreas Hansson
+
+Import('main')
+
+main.Library('iostream3', [main.SharedObject('zfstream.cc')])
+
+main.Prepend(CPPPATH=Dir('.'))
+main.Append(LIBS=['iostream3'])
+main.Prepend(LIBPATH=[Dir('.')])
diff --git a/ext/iostream3/TODO b/ext/iostream3/TODO
new file mode 100644
index 000000000..7032f97be
--- /dev/null
+++ b/ext/iostream3/TODO
@@ -0,0 +1,17 @@
+Possible upgrades to gzfilebuf:
+
+- The ability to do putback (e.g. putbackfail)
+
+- The ability to seek (zlib supports this, but could be slow/tricky)
+
+- Simultaneous read/write access (does it make sense?)
+
+- Support for ios_base::ate open mode
+
+- Locale support?
+
+- Check public interface to see which calls give problems
+  (due to dependence on library internals)
+
+- Override operator<<(ostream&, gzfilebuf*) to allow direct copying
+  of stream buffer to stream ( i.e. os << is.rdbuf(); )
diff --git a/ext/iostream3/test.cc b/ext/iostream3/test.cc
new file mode 100644
index 000000000..94235334f
--- /dev/null
+++ b/ext/iostream3/test.cc
@@ -0,0 +1,50 @@
+/*
+ * Test program for gzifstream and gzofstream
+ *
+ * by Ludwig Schwardt <schwardt@sun.ac.za>
+ * original version by Kevin Ruland <kevin@rodin.wustl.edu>
+ */
+
+#include "zfstream.h"
+#include <iostream>      // for cout
+
+int main() {
+
+  gzofstream outf;
+  gzifstream inf;
+  char buf[80];
+
+  outf.open("test1.txt.gz");
+  outf << "The quick brown fox sidestepped the lazy canine\n"
+       << 1.3 << "\nPlan " << 9 << std::endl;
+  outf.close();
+  std::cout << "Wrote the following message to 'test1.txt.gz' (check with zcat or zless):\n"
+            << "The quick brown fox sidestepped the lazy canine\n"
+            << 1.3 << "\nPlan " << 9 << std::endl;
+
+  std::cout << "\nReading 'test1.txt.gz' (buffered) produces:\n";
+  inf.open("test1.txt.gz");
+  while (inf.getline(buf,80,'\n')) {
+    std::cout << buf << "\t(" << inf.rdbuf()->in_avail() << " chars left in buffer)\n";
+  }
+  inf.close();
+
+  outf.rdbuf()->pubsetbuf(0,0);
+  outf.open("test2.txt.gz");
+  outf << setcompression(Z_NO_COMPRESSION)
+       << "The quick brown fox sidestepped the lazy canine\n"
+       << 1.3 << "\nPlan " << 9 << std::endl;
+  outf.close();
+  std::cout << "\nWrote the same message to 'test2.txt.gz' in uncompressed form";
+
+  std::cout << "\nReading 'test2.txt.gz' (unbuffered) produces:\n";
+  inf.rdbuf()->pubsetbuf(0,0);
+  inf.open("test2.txt.gz");
+  while (inf.getline(buf,80,'\n')) {
+    std::cout << buf << "\t(" << inf.rdbuf()->in_avail() << " chars left in buffer)\n";
+  }
+  inf.close();
+
+  return 0;
+
+}
diff --git a/ext/iostream3/zfstream.cc b/ext/iostream3/zfstream.cc
new file mode 100644
index 000000000..94eb93344
--- /dev/null
+++ b/ext/iostream3/zfstream.cc
@@ -0,0 +1,479 @@
+/*
+ * A C++ I/O streams interface to the zlib gz* functions
+ *
+ * by Ludwig Schwardt <schwardt@sun.ac.za>
+ * original version by Kevin Ruland <kevin@rodin.wustl.edu>
+ *
+ * This version is standard-compliant and compatible with gcc 3.x.
+ */
+
+#include "zfstream.h"
+#include <cstring>          // for strcpy, strcat, strlen (mode strings)
+#include <cstdio>           // for BUFSIZ
+
+// Internal buffer sizes (default and "unbuffered" versions)
+#define BIGBUFSIZE BUFSIZ
+#define SMALLBUFSIZE 1
+
+/*****************************************************************************/
+
+// Default constructor
+gzfilebuf::gzfilebuf()
+: file(NULL), io_mode(std::ios_base::openmode(0)), own_fd(false),
+  buffer(NULL), buffer_size(BIGBUFSIZE), own_buffer(true)
+{
+  // No buffers to start with
+  this->disable_buffer();
+}
+
+// Destructor
+gzfilebuf::~gzfilebuf()
+{
+  // Sync output buffer and close only if responsible for file
+  // (i.e. attached streams should be left open at this stage)
+  this->sync();
+  if (own_fd)
+    this->close();
+  // Make sure internal buffer is deallocated
+  this->disable_buffer();
+}
+
+// Set compression level and strategy
+int
+gzfilebuf::setcompression(int comp_level,
+                          int comp_strategy)
+{
+  return gzsetparams(file, comp_level, comp_strategy);
+}
+
+// Open gzipped file
+gzfilebuf*
+gzfilebuf::open(const char *name,
+                std::ios_base::openmode mode)
+{
+  // Fail if file already open
+  if (this->is_open())
+    return NULL;
+  // Don't support simultaneous read/write access (yet)
+  if ((mode & std::ios_base::in) && (mode & std::ios_base::out))
+    return NULL;
+
+  // Build mode string for gzopen and check it [27.8.1.3.2]
+  char char_mode[6] = "\0\0\0\0\0";
+  if (!this->open_mode(mode, char_mode))
+    return NULL;
+
+  // Attempt to open file
+  if ((file = gzopen(name, char_mode)) == NULL)
+    return NULL;
+
+  // On success, allocate internal buffer and set flags
+  this->enable_buffer();
+  io_mode = mode;
+  own_fd = true;
+  return this;
+}
+
+// Attach to gzipped file
+gzfilebuf*
+gzfilebuf::attach(int fd,
+                  std::ios_base::openmode mode)
+{
+  // Fail if file already open
+  if (this->is_open())
+    return NULL;
+  // Don't support simultaneous read/write access (yet)
+  if ((mode & std::ios_base::in) && (mode & std::ios_base::out))
+    return NULL;
+
+  // Build mode string for gzdopen and check it [27.8.1.3.2]
+  char char_mode[6] = "\0\0\0\0\0";
+  if (!this->open_mode(mode, char_mode))
+    return NULL;
+
+  // Attempt to attach to file
+  if ((file = gzdopen(fd, char_mode)) == NULL)
+    return NULL;
+
+  // On success, allocate internal buffer and set flags
+  this->enable_buffer();
+  io_mode = mode;
+  own_fd = false;
+  return this;
+}
+
+// Close gzipped file
+gzfilebuf*
+gzfilebuf::close()
+{
+  // Fail immediately if no file is open
+  if (!this->is_open())
+    return NULL;
+  // Assume success
+  gzfilebuf* retval = this;
+  // Attempt to sync and close gzipped file
+  if (this->sync() == -1)
+    retval = NULL;
+  if (gzclose(file) < 0)
+    retval = NULL;
+  // File is now gone anyway (postcondition [27.8.1.3.8])
+  file = NULL;
+  own_fd = false;
+  // Destroy internal buffer if it exists
+  this->disable_buffer();
+  return retval;
+}
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+// Convert int open mode to mode string
+bool
+gzfilebuf::open_mode(std::ios_base::openmode mode,
+                     char* c_mode) const
+{
+  bool testb = mode & std::ios_base::binary;
+  bool testi = mode & std::ios_base::in;
+  bool testo = mode & std::ios_base::out;
+  bool testt = mode & std::ios_base::trunc;
+  bool testa = mode & std::ios_base::app;
+
+  // Check for valid flag combinations - see [27.8.1.3.2] (Table 92)
+  // Original zfstream hardcoded the compression level to maximum here...
+  // Double the time for less than 1% size improvement seems
+  // excessive though - keeping it at the default level
+  // To change back, just append "9" to the next three mode strings
+  if (!testi && testo && !testt && !testa)
+    strcpy(c_mode, "w");
+  if (!testi && testo && !testt && testa)
+    strcpy(c_mode, "a");
+  if (!testi && testo && testt && !testa)
+    strcpy(c_mode, "w");
+  if (testi && !testo && !testt && !testa)
+    strcpy(c_mode, "r");
+  // No read/write mode yet
+//  if (testi && testo && !testt && !testa)
+//    strcpy(c_mode, "r+");
+//  if (testi && testo && testt && !testa)
+//    strcpy(c_mode, "w+");
+
+  // Mode string should be empty for invalid combination of flags
+  if (strlen(c_mode) == 0)
+    return false;
+  if (testb)
+    strcat(c_mode, "b");
+  return true;
+}
+
+// Determine number of characters in internal get buffer
+std::streamsize
+gzfilebuf::showmanyc()
+{
+  // Calls to underflow will fail if file not opened for reading
+  if (!this->is_open() || !(io_mode & std::ios_base::in))
+    return -1;
+  // Make sure get area is in use
+  if (this->gptr() && (this->gptr() < this->egptr()))
+    return std::streamsize(this->egptr() - this->gptr());
+  else
+    return 0;
+}
+
+// Fill get area from gzipped file
+gzfilebuf::int_type
+gzfilebuf::underflow()
+{
+  // If something is left in the get area by chance, return it
+  // (this shouldn't normally happen, as underflow is only supposed
+  // to be called when gptr >= egptr, but it serves as error check)
+  if (this->gptr() && (this->gptr() < this->egptr()))
+    return traits_type::to_int_type(*(this->gptr()));
+
+  // If the file hasn't been opened for reading, produce error
+  if (!this->is_open() || !(io_mode & std::ios_base::in))
+    return traits_type::eof();
+
+  // Attempt to fill internal buffer from gzipped file
+  // (buffer must be guaranteed to exist...)
+  int bytes_read = gzread(file, buffer, buffer_size);
+  // Indicates error or EOF
+  if (bytes_read <= 0)
+  {
+    // Reset get area
+    this->setg(buffer, buffer, buffer);
+    return traits_type::eof();
+  }
+  // Make all bytes read from file available as get area
+  this->setg(buffer, buffer, buffer + bytes_read);
+
+  // Return next character in get area
+  return traits_type::to_int_type(*(this->gptr()));
+}
+
+// Write put area to gzipped file
+gzfilebuf::int_type
+gzfilebuf::overflow(int_type c)
+{
+  // Determine whether put area is in use
+  if (this->pbase())
+  {
+    // Double-check pointer range
+    if (this->pptr() > this->epptr() || this->pptr() < this->pbase())
+      return traits_type::eof();
+    // Add extra character to buffer if not EOF
+    if (!traits_type::eq_int_type(c, traits_type::eof()))
+    {
+      *(this->pptr()) = traits_type::to_char_type(c);
+      this->pbump(1);
+    }
+    // Number of characters to write to file
+    int bytes_to_write = this->pptr() - this->pbase();
+    // Overflow doesn't fail if nothing is to be written
+    if (bytes_to_write > 0)
+    {
+      // If the file hasn't been opened for writing, produce error
+      if (!this->is_open() || !(io_mode & std::ios_base::out))
+        return traits_type::eof();
+      // If gzipped file won't accept all bytes written to it, fail
+      if (gzwrite(file, this->pbase(), bytes_to_write) != bytes_to_write)
+        return traits_type::eof();
+      // Reset next pointer to point to pbase on success
+      this->pbump(-bytes_to_write);
+    }
+  }
+  // Write extra character to file if not EOF
+  else if (!traits_type::eq_int_type(c, traits_type::eof()))
+  {
+    // If the file hasn't been opened for writing, produce error
+    if (!this->is_open() || !(io_mode & std::ios_base::out))
+      return traits_type::eof();
+    // Impromptu char buffer (allows "unbuffered" output)
+    char_type last_char = traits_type::to_char_type(c);
+    // If gzipped file won't accept this character, fail
+    if (gzwrite(file, &last_char, 1) != 1)
+      return traits_type::eof();
+  }
+
+  // If you got here, you have succeeded (even if c was EOF)
+  // The return value should therefore be non-EOF
+  if (traits_type::eq_int_type(c, traits_type::eof()))
+    return traits_type::not_eof(c);
+  else
+    return c;
+}
+
+// Assign new buffer
+std::streambuf*
+gzfilebuf::setbuf(char_type* p,
+                  std::streamsize n)
+{
+  // First make sure stuff is sync'ed, for safety
+  if (this->sync() == -1)
+    return NULL;
+  // If buffering is turned off on purpose via setbuf(0,0), still allocate one...
+  // "Unbuffered" only really refers to put [27.8.1.4.10], while get needs at
+  // least a buffer of size 1 (very inefficient though, therefore make it bigger?)
+  // This follows from [27.5.2.4.3]/12 (gptr needs to point at something, it seems)
+  if (!p || !n)
+  {
+    // Replace existing buffer (if any) with small internal buffer
+    this->disable_buffer();
+    buffer = NULL;
+    buffer_size = 0;
+    own_buffer = true;
+    this->enable_buffer();
+  }
+  else
+  {
+    // Replace existing buffer (if any) with external buffer
+    this->disable_buffer();
+    buffer = p;
+    buffer_size = n;
+    own_buffer = false;
+    this->enable_buffer();
+  }
+  return this;
+}
+
+// Write put area to gzipped file (i.e. ensures that put area is empty)
+int
+gzfilebuf::sync()
+{
+  return traits_type::eq_int_type(this->overflow(), traits_type::eof()) ? -1 : 0;
+}
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+// Allocate internal buffer
+void
+gzfilebuf::enable_buffer()
+{
+  // If internal buffer required, allocate one
+  if (own_buffer && !buffer)
+  {
+    // Check for buffered vs. "unbuffered"
+    if (buffer_size > 0)
+    {
+      // Allocate internal buffer
+      buffer = new char_type[buffer_size];
+      // Get area starts empty and will be expanded by underflow as need arises
+      this->setg(buffer, buffer, buffer);
+      // Setup entire internal buffer as put area.
+      // The one-past-end pointer actually points to the last element of the buffer,
+      // so that overflow(c) can safely add the extra character c to the sequence.
+      // These pointers remain in place for the duration of the buffer
+      this->setp(buffer, buffer + buffer_size - 1);
+    }
+    else
+    {
+      // Even in "unbuffered" case, (small?) get buffer is still required
+      buffer_size = SMALLBUFSIZE;
+      buffer = new char_type[buffer_size];
+      this->setg(buffer, buffer, buffer);
+      // "Unbuffered" means no put buffer
+      this->setp(0, 0);
+    }
+  }
+  else
+  {
+    // If buffer already allocated, reset buffer pointers just to make sure no
+    // stale chars are lying around
+    this->setg(buffer, buffer, buffer);
+    this->setp(buffer, buffer + buffer_size - 1);
+  }
+}
+
+// Destroy internal buffer
+void
+gzfilebuf::disable_buffer()
+{
+  // If internal buffer exists, deallocate it
+  if (own_buffer && buffer)
+  {
+    // Preserve unbuffered status by zeroing size
+    if (!this->pbase())
+      buffer_size = 0;
+    delete[] buffer;
+    buffer = NULL;
+    this->setg(0, 0, 0);
+    this->setp(0, 0);
+  }
+  else
+  {
+    // Reset buffer pointers to initial state if external buffer exists
+    this->setg(buffer, buffer, buffer);
+    if (buffer)
+      this->setp(buffer, buffer + buffer_size - 1);
+    else
+      this->setp(0, 0);
+  }
+}
+
+/*****************************************************************************/
+
+// Default constructor initializes stream buffer
+gzifstream::gzifstream()
+: std::istream(NULL), sb()
+{ this->init(&sb); }
+
+// Initialize stream buffer and open file
+gzifstream::gzifstream(const char* name,
+                       std::ios_base::openmode mode)
+: std::istream(NULL), sb()
+{
+  this->init(&sb);
+  this->open(name, mode);
+}
+
+// Initialize stream buffer and attach to file
+gzifstream::gzifstream(int fd,
+                       std::ios_base::openmode mode)
+: std::istream(NULL), sb()
+{
+  this->init(&sb);
+  this->attach(fd, mode);
+}
+
+// Open file and go into fail() state if unsuccessful
+void
+gzifstream::open(const char* name,
+                 std::ios_base::openmode mode)
+{
+  if (!sb.open(name, mode | std::ios_base::in))
+    this->setstate(std::ios_base::failbit);
+  else
+    this->clear();
+}
+
+// Attach to file and go into fail() state if unsuccessful
+void
+gzifstream::attach(int fd,
+                   std::ios_base::openmode mode)
+{
+  if (!sb.attach(fd, mode | std::ios_base::in))
+    this->setstate(std::ios_base::failbit);
+  else
+    this->clear();
+}
+
+// Close file
+void
+gzifstream::close()
+{
+  if (!sb.close())
+    this->setstate(std::ios_base::failbit);
+}
+
+/*****************************************************************************/
+
+// Default constructor initializes stream buffer
+gzofstream::gzofstream()
+: std::ostream(NULL), sb()
+{ this->init(&sb); }
+
+// Initialize stream buffer and open file
+gzofstream::gzofstream(const char* name,
+                       std::ios_base::openmode mode)
+: std::ostream(NULL), sb()
+{
+  this->init(&sb);
+  this->open(name, mode);
+}
+
+// Initialize stream buffer and attach to file
+gzofstream::gzofstream(int fd,
+                       std::ios_base::openmode mode)
+: std::ostream(NULL), sb()
+{
+  this->init(&sb);
+  this->attach(fd, mode);
+}
+
+// Open file and go into fail() state if unsuccessful
+void
+gzofstream::open(const char* name,
+                 std::ios_base::openmode mode)
+{
+  if (!sb.open(name, mode | std::ios_base::out))
+    this->setstate(std::ios_base::failbit);
+  else
+    this->clear();
+}
+
+// Attach to file and go into fail() state if unsuccessful
+void
+gzofstream::attach(int fd,
+                   std::ios_base::openmode mode)
+{
+  if (!sb.attach(fd, mode | std::ios_base::out))
+    this->setstate(std::ios_base::failbit);
+  else
+    this->clear();
+}
+
+// Close file
+void
+gzofstream::close()
+{
+  if (!sb.close())
+    this->setstate(std::ios_base::failbit);
+}
diff --git a/ext/iostream3/zfstream.h b/ext/iostream3/zfstream.h
new file mode 100644
index 000000000..8574479ae
--- /dev/null
+++ b/ext/iostream3/zfstream.h
@@ -0,0 +1,466 @@
+/*
+ * A C++ I/O streams interface to the zlib gz* functions
+ *
+ * by Ludwig Schwardt <schwardt@sun.ac.za>
+ * original version by Kevin Ruland <kevin@rodin.wustl.edu>
+ *
+ * This version is standard-compliant and compatible with gcc 3.x.
+ */
+
+#ifndef ZFSTREAM_H
+#define ZFSTREAM_H
+
+#include <istream>  // not iostream, since we don't need cin/cout
+#include <ostream>
+#include "zlib.h"
+
+/*****************************************************************************/
+
+/**
+ *  @brief  Gzipped file stream buffer class.
+ *
+ *  This class implements basic_filebuf for gzipped files. It doesn't yet support
+ *  seeking (allowed by zlib but slow/limited), putback and read/write access
+ *  (tricky). Otherwise, it attempts to be a drop-in replacement for the standard
+ *  file streambuf.
+*/
+class gzfilebuf : public std::streambuf
+{
+public:
+  //  Default constructor.
+  gzfilebuf();
+
+  //  Destructor.
+  virtual
+  ~gzfilebuf();
+
+  /**
+   *  @brief  Set compression level and strategy on the fly.
+   *  @param  comp_level  Compression level (see zlib.h for allowed values)
+   *  @param  comp_strategy  Compression strategy (see zlib.h for allowed values)
+   *  @return  Z_OK on success, Z_STREAM_ERROR otherwise.
+   *
+   *  Unfortunately, these parameters cannot be modified separately, as the
+   *  previous zfstream version assumed. Since the strategy is seldom changed,
+   *  it can default and setcompression(level) then becomes like the old
+   *  setcompressionlevel(level).
+  */
+  int
+  setcompression(int comp_level,
+                 int comp_strategy = Z_DEFAULT_STRATEGY);
+
+  /**
+   *  @brief  Check if file is open.
+   *  @return  True if file is open.
+  */
+  bool
+  is_open() const { return (file != NULL); }
+
+  /**
+   *  @brief  Open gzipped file.
+   *  @param  name  File name.
+   *  @param  mode  Open mode flags.
+   *  @return  @c this on success, NULL on failure.
+  */
+  gzfilebuf*
+  open(const char* name,
+       std::ios_base::openmode mode);
+
+  /**
+   *  @brief  Attach to already open gzipped file.
+   *  @param  fd  File descriptor.
+   *  @param  mode  Open mode flags.
+   *  @return  @c this on success, NULL on failure.
+  */
+  gzfilebuf*
+  attach(int fd,
+         std::ios_base::openmode mode);
+
+  /**
+   *  @brief  Close gzipped file.
+   *  @return  @c this on success, NULL on failure.
+  */
+  gzfilebuf*
+  close();
+
+protected:
+  /**
+   *  @brief  Convert ios open mode int to mode string used by zlib.
+   *  @return  True if valid mode flag combination.
+  */
+  bool
+  open_mode(std::ios_base::openmode mode,
+            char* c_mode) const;
+
+  /**
+   *  @brief  Number of characters available in stream buffer.
+   *  @return  Number of characters.
+   *
+   *  This indicates number of characters in get area of stream buffer.
+   *  These characters can be read without accessing the gzipped file.
+  */
+  virtual std::streamsize
+  showmanyc();
+
+  /**
+   *  @brief  Fill get area from gzipped file.
+   *  @return  First character in get area on success, EOF on error.
+   *
+   *  This actually reads characters from gzipped file to stream
+   *  buffer. Always buffered.
+  */
+  virtual int_type
+  underflow();
+
+  /**
+   *  @brief  Write put area to gzipped file.
+   *  @param  c  Extra character to add to buffer contents.
+   *  @return  Non-EOF on success, EOF on error.
+   *
+   *  This actually writes characters in stream buffer to
+   *  gzipped file. With unbuffered output this is done one
+   *  character at a time.
+  */
+  virtual int_type
+  overflow(int_type c = traits_type::eof());
+
+  /**
+   *  @brief  Installs external stream buffer.
+   *  @param  p  Pointer to char buffer.
+   *  @param  n  Size of external buffer.
+   *  @return  @c this on success, NULL on failure.
+   *
+   *  Call setbuf(0,0) to enable unbuffered output.
+  */
+  virtual std::streambuf*
+  setbuf(char_type* p,
+         std::streamsize n);
+
+  /**
+   *  @brief  Flush stream buffer to file.
+   *  @return  0 on success, -1 on error.
+   *
+   *  This calls underflow(EOF) to do the job.
+  */
+  virtual int
+  sync();
+
+//
+// Some future enhancements
+//
+//  virtual int_type uflow();
+//  virtual int_type pbackfail(int_type c = traits_type::eof());
+//  virtual pos_type
+//  seekoff(off_type off,
+//          std::ios_base::seekdir way,
+//          std::ios_base::openmode mode = std::ios_base::in|std::ios_base::out);
+//  virtual pos_type
+//  seekpos(pos_type sp,
+//          std::ios_base::openmode mode = std::ios_base::in|std::ios_base::out);
+
+private:
+  /**
+   *  @brief  Allocate internal buffer.
+   *
+   *  This function is safe to call multiple times. It will ensure
+   *  that a proper internal buffer exists if it is required. If the
+   *  buffer already exists or is external, the buffer pointers will be
+   *  reset to their original state.
+  */
+  void
+  enable_buffer();
+
+  /**
+   *  @brief  Destroy internal buffer.
+   *
+   *  This function is safe to call multiple times. It will ensure
+   *  that the internal buffer is deallocated if it exists. In any
+   *  case, it will also reset the buffer pointers.
+  */
+  void
+  disable_buffer();
+
+  /**
+   *  Underlying file pointer.
+  */
+  gzFile file;
+
+  /**
+   *  Mode in which file was opened.
+  */
+  std::ios_base::openmode io_mode;
+
+  /**
+   *  @brief  True if this object owns file descriptor.
+   *
+   *  This makes the class responsible for closing the file
+   *  upon destruction.
+  */
+  bool own_fd;
+
+  /**
+   *  @brief  Stream buffer.
+   *
+   *  For simplicity this remains allocated on the free store for the
+   *  entire life span of the gzfilebuf object, unless replaced by setbuf.
+  */
+  char_type* buffer;
+
+  /**
+   *  @brief  Stream buffer size.
+   *
+   *  Defaults to system default buffer size (typically 8192 bytes).
+   *  Modified by setbuf.
+  */
+  std::streamsize buffer_size;
+
+  /**
+   *  @brief  True if this object owns stream buffer.
+   *
+   *  This makes the class responsible for deleting the buffer
+   *  upon destruction.
+  */
+  bool own_buffer;
+};
+
+/*****************************************************************************/
+
+/**
+ *  @brief  Gzipped file input stream class.
+ *
+ *  This class implements ifstream for gzipped files. Seeking and putback
+ *  is not supported yet.
+*/
+class gzifstream : public std::istream
+{
+public:
+  //  Default constructor
+  gzifstream();
+
+  /**
+   *  @brief  Construct stream on gzipped file to be opened.
+   *  @param  name  File name.
+   *  @param  mode  Open mode flags (forced to contain ios::in).
+  */
+  explicit
+  gzifstream(const char* name,
+             std::ios_base::openmode mode = std::ios_base::in);
+
+  /**
+   *  @brief  Construct stream on already open gzipped file.
+   *  @param  fd    File descriptor.
+   *  @param  mode  Open mode flags (forced to contain ios::in).
+  */
+  explicit
+  gzifstream(int fd,
+             std::ios_base::openmode mode = std::ios_base::in);
+
+  /**
+   *  Obtain underlying stream buffer.
+  */
+  gzfilebuf*
+  rdbuf() const
+  { return const_cast<gzfilebuf*>(&sb); }
+
+  /**
+   *  @brief  Check if file is open.
+   *  @return  True if file is open.
+  */
+  bool
+  is_open() { return sb.is_open(); }
+
+  /**
+   *  @brief  Open gzipped file.
+   *  @param  name  File name.
+   *  @param  mode  Open mode flags (forced to contain ios::in).
+   *
+   *  Stream will be in state good() if file opens successfully;
+   *  otherwise in state fail(). This differs from the behavior of
+   *  ifstream, which never sets the state to good() and therefore
+   *  won't allow you to reuse the stream for a second file unless
+   *  you manually clear() the state. The choice is a matter of
+   *  convenience.
+  */
+  void
+  open(const char* name,
+       std::ios_base::openmode mode = std::ios_base::in);
+
+  /**
+   *  @brief  Attach to already open gzipped file.
+   *  @param  fd  File descriptor.
+   *  @param  mode  Open mode flags (forced to contain ios::in).
+   *
+   *  Stream will be in state good() if attach succeeded; otherwise
+   *  in state fail().
+  */
+  void
+  attach(int fd,
+         std::ios_base::openmode mode = std::ios_base::in);
+
+  /**
+   *  @brief  Close gzipped file.
+   *
+   *  Stream will be in state fail() if close failed.
+  */
+  void
+  close();
+
+private:
+  /**
+   *  Underlying stream buffer.
+  */
+  gzfilebuf sb;
+};
+
+/*****************************************************************************/
+
+/**
+ *  @brief  Gzipped file output stream class.
+ *
+ *  This class implements ofstream for gzipped files. Seeking and putback
+ *  is not supported yet.
+*/
+class gzofstream : public std::ostream
+{
+public:
+  //  Default constructor
+  gzofstream();
+
+  /**
+   *  @brief  Construct stream on gzipped file to be opened.
+   *  @param  name  File name.
+   *  @param  mode  Open mode flags (forced to contain ios::out).
+  */
+  explicit
+  gzofstream(const char* name,
+             std::ios_base::openmode mode = std::ios_base::out);
+
+  /**
+   *  @brief  Construct stream on already open gzipped file.
+   *  @param  fd    File descriptor.
+   *  @param  mode  Open mode flags (forced to contain ios::out).
+  */
+  explicit
+  gzofstream(int fd,
+             std::ios_base::openmode mode = std::ios_base::out);
+
+  /**
+   *  Obtain underlying stream buffer.
+  */
+  gzfilebuf*
+  rdbuf() const
+  { return const_cast<gzfilebuf*>(&sb); }
+
+  /**
+   *  @brief  Check if file is open.
+   *  @return  True if file is open.
+  */
+  bool
+  is_open() { return sb.is_open(); }
+
+  /**
+   *  @brief  Open gzipped file.
+   *  @param  name  File name.
+   *  @param  mode  Open mode flags (forced to contain ios::out).
+   *
+   *  Stream will be in state good() if file opens successfully;
+   *  otherwise in state fail(). This differs from the behavior of
+   *  ofstream, which never sets the state to good() and therefore
+   *  won't allow you to reuse the stream for a second file unless
+   *  you manually clear() the state. The choice is a matter of
+   *  convenience.
+  */
+  void
+  open(const char* name,
+       std::ios_base::openmode mode = std::ios_base::out);
+
+  /**
+   *  @brief  Attach to already open gzipped file.
+   *  @param  fd  File descriptor.
+   *  @param  mode  Open mode flags (forced to contain ios::out).
+   *
+   *  Stream will be in state good() if attach succeeded; otherwise
+   *  in state fail().
+  */
+  void
+  attach(int fd,
+         std::ios_base::openmode mode = std::ios_base::out);
+
+  /**
+   *  @brief  Close gzipped file.
+   *
+   *  Stream will be in state fail() if close failed.
+  */
+  void
+  close();
+
+private:
+  /**
+   *  Underlying stream buffer.
+  */
+  gzfilebuf sb;
+};
+
+/*****************************************************************************/
+
+/**
+ *  @brief  Gzipped file output stream manipulator class.
+ *
+ *  This class defines a two-argument manipulator for gzofstream. It is used
+ *  as base for the setcompression(int,int) manipulator.
+*/
+template<typename T1, typename T2>
+  class gzomanip2
+  {
+  public:
+    // Allows insertor to peek at internals
+    template <typename Ta, typename Tb>
+      friend gzofstream&
+      operator<<(gzofstream&,
+                 const gzomanip2<Ta,Tb>&);
+
+    // Constructor
+    gzomanip2(gzofstream& (*f)(gzofstream&, T1, T2),
+              T1 v1,
+              T2 v2);
+  private:
+    // Underlying manipulator function
+    gzofstream&
+    (*func)(gzofstream&, T1, T2);
+
+    // Arguments for manipulator function
+    T1 val1;
+    T2 val2;
+  };
+
+/*****************************************************************************/
+
+// Manipulator function thunks through to stream buffer
+inline gzofstream&
+setcompression(gzofstream &gzs, int l, int s = Z_DEFAULT_STRATEGY)
+{
+  (gzs.rdbuf())->setcompression(l, s);
+  return gzs;
+}
+
+// Manipulator constructor stores arguments
+template<typename T1, typename T2>
+  inline
+  gzomanip2<T1,T2>::gzomanip2(gzofstream &(*f)(gzofstream &, T1, T2),
+                              T1 v1,
+                              T2 v2)
+  : func(f), val1(v1), val2(v2)
+  { }
+
+// Insertor applies underlying manipulator function to stream
+template<typename T1, typename T2>
+  inline gzofstream&
+  operator<<(gzofstream& s, const gzomanip2<T1,T2>& m)
+  { return (*m.func)(s, m.val1, m.val2); }
+
+// Insert this onto stream to simplify setting of compression level
+inline gzomanip2<int,int>
+setcompression(int l, int s = Z_DEFAULT_STRATEGY)
+{ return gzomanip2<int,int>(&setcompression, l, s); }
+
+#endif // ZFSTREAM_H