x86: Fix implicit stack addressing in 64-bit mode

When in 64-bit mode, if the stack is accessed implicitly by an instruction
the alternate address prefix should be ignored if present.

This patch adds an extra flag to the ldstop which signifies when the
address override should be ignored. Then, for all of the affected
instructions, this patch adds two options to the ld and st opcode to use
the current stack addressing mode for all addresses and to ignore the
AddressSizeFlagBit.  Finally, this patch updates the x86 TLB to not
truncate the address if it is in 64-bit mode and the IgnoreAddrSizeFlagBit
is set.

This fixes a problem when calling __libc_start_main with a binary that is
linked with a recent version of ld. This version of ld uses the address
override prefix (0x67) on the call instruction instead of a nop.

Note: This has not been tested in compatibility mode and only the call
instruction with the address override prefix has been tested.

See [1] page 9 (pdf page 45)

For instructions that are affected see [1] page 519 (pdf page 555).

[1] http://support.amd.com/TechDocs/24594.pdf

Signed-off-by: Jason Lowe-Power <jason@lowepower.com>

2 files changed, 11 insertions, 11 deletions

diff --git a/src/arch/x86/isa/insts/general_purpose/control_transfer/call.py b/src/arch/x86/isa/insts/general_purpose/control_transfer/call.py
index eaaa18208..c58152ca4 100644
--- a/src/arch/x86/isa/insts/general_purpose/control_transfer/call.py
+++ b/src/arch/x86/isa/insts/general_purpose/control_transfer/call.py
@@ -45,7 +45,7 @@ def macroop CALL_NEAR_I
     limm t1, imm
     rdip t7
     # Check target of call
-    st t7, ss, [0, t0, rsp], "-env.dataSize"
+    stis t7, ss, [0, t0, rsp], "-env.dataSize"
     subi rsp, rsp, ssz
     wrip t7, t1
 };
@@ -58,7 +58,7 @@ def macroop CALL_NEAR_R
 
     rdip t1
     # Check target of call
-    st t1, ss, [0, t0, rsp], "-env.dataSize"
+    stis t1, ss, [0, t0, rsp], "-env.dataSize"
     subi rsp, rsp, ssz
     wripi reg, 0
 };
diff --git a/src/arch/x86/isa/insts/general_purpose/data_transfer/stack_operations.py b/src/arch/x86/isa/insts/general_purpose/data_transfer/stack_operations.py
index be9387ecf..a3a6eb29e 100644
--- a/src/arch/x86/isa/insts/general_purpose/data_transfer/stack_operations.py
+++ b/src/arch/x86/isa/insts/general_purpose/data_transfer/stack_operations.py
@@ -40,7 +40,7 @@ def macroop POP_R {
     # Make the default data size of pops 64 bits in 64 bit mode
     .adjust_env oszIn64Override
 
-    ld t1, ss, [1, t0, rsp], dataSize=ssz
+    ldis t1, ss, [1, t0, rsp], dataSize=ssz
     addi rsp, rsp, ssz, dataSize=asz
     mov reg, reg, t1
 };
@@ -49,7 +49,7 @@ def macroop POP_M {
     # Make the default data size of pops 64 bits in 64 bit mode
     .adjust_env oszIn64Override
 
-    ld t1, ss, [1, t0, rsp], dataSize=ssz
+    ldis t1, ss, [1, t0, rsp], dataSize=ssz
     cda seg, sib, disp, dataSize=ssz
     addi rsp, rsp, ssz, dataSize=asz
     st t1, seg, sib, disp, dataSize=ssz
@@ -70,7 +70,7 @@ def macroop PUSH_R {
     # Make the default data size of pops 64 bits in 64 bit mode
     .adjust_env oszIn64Override
 
-    st reg, ss, [1, t0, rsp], "-env.stackSize", dataSize=ssz
+    stis reg, ss, [1, t0, rsp], "-env.stackSize", dataSize=ssz
     subi rsp, rsp, ssz
 };
 
@@ -79,7 +79,7 @@ def macroop PUSH_I {
     .adjust_env oszIn64Override
 
     limm t1, imm
-    st t1, ss, [1, t0, rsp], "-env.stackSize", dataSize=ssz
+    stis t1, ss, [1, t0, rsp], "-env.stackSize", dataSize=ssz
     subi rsp, rsp, ssz
 };
 
@@ -138,7 +138,7 @@ def macroop LEAVE {
     .adjust_env oszIn64Override
 
     mov t1, t1, rbp, dataSize=ssz
-    ld rbp, ss, [1, t0, t1], dataSize=ssz
+    ldis rbp, ss, [1, t0, t1], dataSize=ssz
     mov rsp, rsp, t1, dataSize=ssz
     addi rsp, rsp, ssz, dataSize=ssz
 };
@@ -156,7 +156,7 @@ def macroop ENTER_I_I {
     # t1 is now the masked nesting level, and t2 is the amount of storage.
 
     # Push rbp.
-    st rbp, ss, [1, t0, rsp], "-env.dataSize"
+    stis rbp, ss, [1, t0, rsp], "-env.dataSize"
     subi rsp, rsp, ssz
 
     # Save the stack pointer for later
@@ -172,8 +172,8 @@ def macroop ENTER_I_I {
 
     limm t4, "ULL(-1)", dataSize=8
 topOfLoop:
-    ld t5, ss, [dsz, t4, rbp]
-    st t5, ss, [1, t0, rsp], "-env.dataSize"
+    ldis t5, ss, [dsz, t4, rbp]
+    stis t5, ss, [1, t0, rsp], "-env.dataSize"
     subi rsp, rsp, ssz
 
     # If we're not done yet, loop
@@ -183,7 +183,7 @@ topOfLoop:
 
 bottomOfLoop:
     # Push the old rbp onto the stack
-    st t6, ss, [1, t0, rsp], "-env.dataSize"
+    stis t6, ss, [1, t0, rsp], "-env.dataSize"
     subi rsp, rsp, ssz
 
 skipLoop: