summaryrefslogtreecommitdiff
path: root/src/mem/slicc
diff options
context:
space:
mode:
authorNilay Vaish <nilay@cs.wisc.edu>2014-04-19 09:00:31 -0500
committerNilay Vaish <nilay@cs.wisc.edu>2014-04-19 09:00:31 -0500
commit4ceeda20aab924de0910bd9caa4919553ff23d56 (patch)
treec51eeda739864ea00cc12fc031be3225a8bf1b1b /src/mem/slicc
parent183100b8cbe137da906631166f6664e4ef1bb612 (diff)
downloadgem5-4ceeda20aab924de0910bd9caa4919553ff23d56.tar.xz
ruby: slicc: remove old documentation
Has not been maintained at all. Since there is alternate documentation available on gem5.org, no need to have this separately.
Diffstat (limited to 'src/mem/slicc')
-rw-r--r--src/mem/slicc/doc/SLICC_V03.txt307
-rw-r--r--src/mem/slicc/doc/tutorial.tex574
2 files changed, 0 insertions, 881 deletions
diff --git a/src/mem/slicc/doc/SLICC_V03.txt b/src/mem/slicc/doc/SLICC_V03.txt
deleted file mode 100644
index 1c2a95a39..000000000
--- a/src/mem/slicc/doc/SLICC_V03.txt
+++ /dev/null
@@ -1,307 +0,0 @@
-SLICC - Version 0.3 Design Document - January 17, 1999
-Milo Martin and Dan Sorin
-
-Question: Rethinking of support for profiling the transactions
-
-Question: How do we deal with functions/methods and resources
-
-Comment: We need to discuss the sequencer interface so it can work now
- and for the speculative version buffer.
-
-Overview
---------
-
-We are in the process of designing and implementing SLICC v0.3, an
-evolution of SLICC v0.2. The new design includes capabilities for
-design of multilevel cache hierarchies including the specification of
-multiple protocol state machines (PSMs) and the queues which connect
-these PSMs and the network. We actually believe that most of the
-network and network topology, including the ordered network, can be
-expressed using the new hierarchical extensions to the language.
-
-In addition, many implicit aspects of the language will be eliminated
-in favor of explicit declarations. For example functions, queues, and
-objects declarations such as "cacheMemory" and "TBETable" will be
-explicitly declared. This will allow for full static type checking
-and easier extension for the language. Event triggering will be part
-of "in_port" declarations and not "event" declarations. Finally, many
-less fundamental, but important, features and internal code
-improvements will be enhanced.
-
-SLICC History
--------------
-
-v0.1 - Initially the language only handled the generation of the PSM
- transition table logic. All actions and event triggering were
- still coded in C++. At this point it was still called, "the
- language."
-
-v0.2 - Extended the language to include a simple C like syntax for
- specifying actions, event triggering, and manipulating queues
- and state elements. This version was the first version of the
- language known as SLICC (suggested by Amir) and was used for
- the Multifacet ISCA 2000 submission.
-
-v0.3 - Development effort started January 2000. Intended features and
- enhancements are described by this document.
-
-Specifying Hierarchical Designs
--------------------------------
-
-Right now all of our protocols have two tables, a processor/cache PSM
-and a directory PSM. In v0.2 this is a rigid requirement and
-the names are implicit. SLICC v0.3 will allow for an arbitrary number
-of different PSMs.
-
-The most significant improvement in v0.3 is the ability for the user
-to define an arbitrary set of interconnected PSMs. PSMs may include
-an L1 cache controller, L2 cache controller, directory controller,
-speculative version buffer, network interface, etc. There are a
-couple of "primitive PSMs" such as the sequencer.
-
-There will be a notion of a "node" of the system. In a node, each PSM
-will be instantiated and connected together with queues. For example,
-assume we define a PSMs and want to create a queue of RequestMessages
-to communicate between it and the network.
-
- machine(CacheController) {
- ...
- out_port(to_network, RequestMessage, "To the network", desc="...");
- ...
- }
-
- CacheController cache, desc="...";
-
- connect(cache.to_network, network.from_cache, ordered="yes", desc="...");
-
-Explicit State Manipulation
----------------------------
-
-As before, PSMs have states, events, and transitions. New in v0.3 each
-PSM must have user defined methods for get_state(address) and
-set_state(address, state), and these methods are written explicitly,
-instead of being implicit functions of memory states (e.g., our
-current implementation which implicitly uses the TBE state if there is
-a TBE or uses the cache state). Functions have a return value,
-procedures do not. Function calls are expressions, procedure calls
-are statements. All function and procedure parameters are considered
-pass-by-value.
-
- procedure set_state(Address addr, State state) {
- ...
- }
-
- function State get_state(Address addr) {
- ...
- }
-
-Explicit Declaration
---------------------
-
-PSMs reference or declare structures, such as queues, ports, cache
-memories, main memory, TBEs, write buffers, etc. These primitive
-types and structures are written in C++, and their semantics are still
-specified by the C++ coder. Examples of these primitive types include
-"CacheMemory," "TBETable," as well as various types of queues.
-
-One major difference is that in v0.3 the interface for all of these
-primitive objects will be declared (but not defined) in the SLICC
-language. This also allows adding primitive structures by defining a
-C++ implementation and a SLICC interface specification. This will
-make the language much more extensible. Specifying the interface of
-these primitive types, structures, and queues in SLICC will eliminate
-much of the implicit semantics that is currently hiding in the
-controllers.
-
-The interface declaration might be in one file and shared between all
-protocols. The object instantiation would be internal to each PSM
-that requires a cache memory. The syntax for messages will also be
-enhanced by using this new syntax. Notice the support for default
-values.
-
- structure(CacheMemory, "Cache memory", desc="...") {
- void cache_change_state(Address addr, State state), desc="...";
- Data dataBlk, default="", desc="";
- bool cache_avail(Address addr), desc="...";
- Address cache_probe(Address addr), desc="...";
- void cache_allocate(Address addr), desc="...";
- }
-
- CacheMemory L1cacheMemory, desc="...";
-
-Structure specification is going to require the introduction of an
-object model in the language. The "." (dot) operator is going to be
-extended beyond the use as structure element access, but also allow
-for a object method call syntax similar to C++ and Java.
-
- L1cacheMemory.cache_allocate(addr);
-
-Polymorphism
-------------
-
-We are also going to want to allow for polymorphism for many of the
-structures. We already have a limited degree of polymorphism between
-different protocols by using the same cache memory structure with
-different "CacheEntry" types in each protocol. Now that we are going
-to have multiple levels of cache, each requiring slightly different
-state bits, we are going to want to specify cache memory structures
-which have different "CacheEntry" types in the same protocol. To do
-this right, this is going to require adding full polymorphism support
-to the language. Right now we imagine something like C++'s templates,
-since they are a more natural fit to hardware synthesis in the future.
-
-Type Checker
-------------
-
-All of the above substantially complicates our type system by
-requiring more types and scoping rules. As a step towards
-understanding the implications of the type system, a type checking
-system will be implemented. This is a hard requirement if we are ever
-to distribute the system since receiving compile time errors in the
-generated code is not acceptable. In order to ensure that we don't
-accidentally design a language that is not statically type checkable,
-it is important to add the type checker sooner rather than later.
-
-Event Triggering
-----------------
-
-In v0.2, PSM events were individually specified as sets of conditions.
-The following SLICC v0.2 code is a simplified example from the origin
-protocol.
-
- event(Dir_data_ack_0, "Data ack 0", desc="... ack count == 0") {
- if (queue_ready(responseNetwork)) {
- peek(responseNetwork, ResponseMsg) {
- if(in_msg.NumPendingAcks == 0) {
- trigger(in_msg.Address);
- }
- }
- }
- }
-
- event(Dir_data_ack_not_0, "Data ack not 0", desc="... ack count != 0") {
- if (queue_ready(responseNetwork)) {
- peek(responseNetwork, ResponseMsg) {
- if(in_msg.NumPendingAcks != 0) {
- trigger(in_msg.Address);
- }
- }
- }
- }
-
-The above code defines the exact conditions for the events to be
-triggered. This type of event specification led to redundant code and
-numerous bugs where conditions for different events were not
-completely orthogonal.
-
-In v0.3, events will be declared with no accompanying code (similar to
-how states are specified). Instead, the code that determines which
-event is triggered will be part of each incoming port's declaration.
-This approach should eliminate redundancy and bugs in trigger
-conditions. The v0.3 code for the above would look like:
-
- event(Dir_data_ack_0, "Data ack 0", desc="... ack count = 0");
- event(Dir_data_ack_not_0, "Data ack not 0", desc="... ack count != 0");
-
- in_port(responseNetwork, ResponseMsg, "Response Network", desc="...") {
- if(in_msg.NumPendingAcks == 0) {
- trigger(Dir_data_ack_0, in_msg.Address);
- } else {
- trigger(Dir_data_ack_not_0, in_msg.Address);
- }
- }
-
-Notice that one no longer needs to explicitly check if the queue is
-ready or to perform the peek operation.
-
-Also notice that the type of messages that arrives on the port is
-explicitly declared. All ports, incoming and outgoing, are now
-explicitly type channels. You will still be required to include the
-type of message when manipulating the queue. The type specified will
-be statically type checked and also acts as self-documenting code.
-
-Other Improvements
-------------------
-
-There will be a number of other improvements in v0.3 such as general
-performance tuning and clean up of the internals of the compiler. The
-compiler will be modified to operate on multiple files. In addition,
-the abstract syntax tree internal to the code will need to be extended
-to encompass more information, including information parsed in from
-multiple files.
-
-The affiliates talk and the document for the language should also be
-updated to reflect the changes in the new version.
-
-Looking Forward
----------------
-
-When designing v0.3 we are keeping future plans in mind.
-
-- When our designs of the multilevel cache hierarchy are complete, we
- expect to have a large amount of replication between the protocols
- and caches controllers within a protocol. For v0.4 we hope to look
- at the patterns that have evolved and look for ways in which the
- language can capture these patterns. Exploiting reuse will provide
- quicker protocol development and maintainability.
-
-- By keeping the specification structural, we are looking towards
- generating VHDL/Verilog from SLICC. The type system will help this,
- as will more explicit instantiation and declaration of types and
- structures. The structures now written in C++ (sequencer, network,
- cache arrays) will be ported to the HDL we select. The rest of the
- controllers will be generated by the compiler. At first the
- generated controller will not be optimized. I believe that with
- more effort we can automatically generate reasonably optimized,
- pipelined implementation of the controllers.
-
-Implementation Plan
--------------------
-
-- HTML generator
-- Extend internal parser AST nodes
-- Add get_state function and set_state procedure declarations
-- Move trigger logic from events to in_ports
-- Types
- - Change type declaration syntax
- - Declare primitive types and corresponding C++ types
- - Add default values to structures and types
- - Add object method call syntax
- - Write type checker
-- Documentation
- - Revise document
- - Update presentation
-
-Document History
-----------------
-
-$Id: SLICC_V03.txt,v 3.0 2000/09/12 20:27:59 sorin Exp $
-
-$Log: SLICC_V03.txt,v $
-Revision 3.0 2000/09/12 20:27:59 sorin
-Version 3.0 signifies a checkpoint of the source tree right after the
-final draft of the ASPLOS '00 paper.
-
-Revision 1.1.1.1 2000/03/09 10:18:38 milo
-Initial import
-
-Revision 2.0 2000/01/19 07:21:13 milo
-Version 2.0
-
-Revision 1.5 2000/01/18 10:26:24 milo
-Changed the SLICC parser so that it generates a full AST. This is the
-first step in moving towards v0.3
-
-Revision 1.4 2000/01/17 18:36:15 sorin
-*** empty log message ***
-
-Revision 1.3 2000/01/15 10:30:16 milo
-Added implementation list
-
-Revision 1.2 2000/01/15 08:11:44 milo
-Minor revisions
-
-Revision 1.1 2000/01/15 07:14:17 milo
-Converted Dan's first draft into a text file. Significant
-modifications were made.
-
diff --git a/src/mem/slicc/doc/tutorial.tex b/src/mem/slicc/doc/tutorial.tex
deleted file mode 100644
index c20dba156..000000000
--- a/src/mem/slicc/doc/tutorial.tex
+++ /dev/null
@@ -1,574 +0,0 @@
-%& latex
-\documentclass[11pt]{article}
-\usepackage{graphics}
-\usepackage{color}
-
-\textheight 9.0 in
-\topmargin -0.5 in
-\textwidth 6.5 in
-\oddsidemargin -0.0 in
-\evensidemargin -0.0 in
-
-\begin{document}
-
-\definecolor{dark}{gray}{0.5}
-
-\newcommand{\syntax}[1]{%
-\begin{center}
-\fbox{\tt \small
-\begin{tabular}{l}
-#1\end{tabular}}\end{center}}
-
-\begin{center}
-{\LARGE Tutorial for SLICC v0.2} \\
-\vspace{.25in}
-{\large Milo Martin} \\
-{\large 8/25/1999}
-\end{center}
-
-\section*{Overview}
-
-This document attempts to illustrate the syntax and expressiveness of
-the cache coherence protocol specification language through a small
-example. A ``stupido'' cache coherence protocol is described in prose
-and then expressed in the language.
-
-The protocol used as the running example is described. Then each of
-the elements of the protocol is discussed and expressed in the
-language: states, events, transitions, and actions.
-
-\section*{Protocol Description}
-
-In order to make this example a simple as possible, the protocol
-described is a simple as possible and makes many simplifying
-assumptions. These simplifications were made only to clarify the
-exposition and are not indications of limitations of the
-expressiveness of the description language. We have already specified
-a more complicated MSI broadcast snooping protocol, a multicast
-snooping protocol, and a directory protocol. The simplifying
-assumptions are listed below. The remaining details of the protocol
-are described in the sections where we give the syntax of the
-language.
-
-\begin{itemize}
-
-\item
-The protocol uses broadcast snooping that assumes that a broadcast can
-only occur if all processors have processed all of their incoming
-address transactions. In essence, when a processor issue an address
-request, that request will be next in the global order. This allows
-us to avoid needed to handle the cases before we have observed our
-request in the global order.
-
-\item
-The protocol has only Modified and Idle stable states. (Note: Even
-the Shared state is omitted.)
-
-\item
-To avoid describing replacement (PutX's) and writebacks, the caches
-are in treated as infinite in size.
-
-\item
-No forward progress bit is used, so the protocol as specified does not
-guarantee forward progress.
-
-\item
-Only the mandatory request queue is used. No optional or prefetch
-queue is described.
-
-\item
-The above simplifications reduce the need for TBEs (Translation Buffer
-Entries) and thus the idea of a TBE is not include.
-
-\item
-Each memory module is assumed to have some state associated with each
-cache block in the memory. This requires a simple directory/memory
-state machine to work as a compliment to the processor state machine.
-Traditional broadcast snooping protocols often have no ``directory''
-state in the memory.
-
-\end{itemize}
-
-\section*{Protocol Messages}
-
-Cache coherence protocols communicate by sending well defined
-messages. To fully specify a cache coherence protocol we need to be
-able to specify the message types and fields. For this protocol we
-have address messages ({\tt AddressMsg}) which are broadcast, and data
-messages ({\tt DataMsg}) which are point-to-point. Address messages
-have an address field ({\tt Address}), a request type ({\tt Type}),
-and which processor made the request ({\tt Requestor}). Data message
-have an address field ({\tt Address}), a destination ({\tt
-Destination}), and the actual cache block being transfered ({\tt
-DataBlk}). The names in parenthesis are important because those are
-the names which code later in the specification will reference various
-message types and fields in the messages.
-
-Messages are declared by creating types with {\tt new\_type()} and
-adding fields with {\tt type\_field()}. The exact syntax for
-declaring types and message is a bit ugly right now and is going to be
-changed in the near future. If you wish, please see the appendix for
-an example of the current syntax.
-
-
-
-\section*{Cache States}
-
-Idle and Modified are the two stable states in our protocol. In
-addition the we have a single transient processor state. This state
-is used after a processor has issued a request and is waiting for the
-data response to arrive.
-
-Declaring states in the language is the first of a number of
-declarations we will be using. All of these declarations have a
-similar format. Below is the format for a state declaration.
-
-\syntax{
-{\tt state({\em identifier}, {\em shorthand}, {\em pair1}, {\em pair2}, ...);}
-}
-
-{\em identifier} is a name that is used later to
-refer to this state later in the description. It must start with a
-letter and after than can have any combination of letters, numbers,
-and the underscore character. {\em shorthand} is a quoted string
-which contains the shorthand that should be used for the state when
-generating tables and such.
-
-The {\em pair}'s are used to associate arbitrary information with each
-state. Zero or more pairs can be included in each declaration. For
-example we want to have a more verbose description of each state when
-we generate the table which contains the states and descriptions.
-This information is encoded in the language by adding a {\tt desc}
-parameter to a declaration. The name of the parameter is followed by
-an equal sign and a string with the description. The {\tt desc} pair
-technically optional, however the table generation tool will complain
-about a missing description if it is not present.
-
-The three states for our protocol are expressed as follows:
-
-\begin{verbatim}
-state(I, "I", desc="Idle");
-state(M, "M", desc="Modified");
-state(IM, "IM", desc="Idle, issued request but have not seen data yet");
-\end{verbatim}
-
-\section*{Cache Events}
-
-Events are external stimulus that cause the state machine to take
-action. This is most often a message in one of the queues from the
-network or processor. Events form the columns of the protocol table.
-Our simple protocol has one event per incoming queue. When a message
-is waiting in one of these queues and event can occur. We can see a
-request from the processor in the mandatory queue, another processor's
-request, or a data response.
-
-Events are declared in the language similarly to states. The {\em
-identifier}, {\em shorthand}, and {\em pair}'s have the same purpose
-as in a state declaration.
-
-\syntax{
-event({\em identifier}, {\em shorthand}, {\em pair1}, {\em pair2}, ...) \{ \\
-\hspace{.1in} {\em statement\_list} \\
-\} \\
-}
-
-Events are different in that they have a list of statements which
-allows exact specification of when the event should ``trigger'' a
-transition. These statements are mini-programming language with
-syntax similar to that of C. For example the {\tt peek} construct in
-this context checks to see if there is a message at the head of the
-specified queue, and if so, conceptually copies the message to a
-temporary variable accessed as {\tt in\_msg}. The language also
-supports various procedure calls, functions, conditional statements,
-assignment, and queue operations such as peek, enqueue and dequeue.
-The {\tt trigger()} construct takes an address as the only parameter.
-This is the address that should be triggered for the event. To give
-you a feel for what this code looks like, the three events for our
-simple protocol are below.
-
-\begin{verbatim}
-event(LoadStore, "LoadStore", desc="Load or Store request from local processor") {
- peek(mandatoryQueue_ptr, CacheMsg) {
- trigger(in_msg.Address);
- }
-}
-
-event(Other_GETX, "Other GETX", desc="Observed a GETX request from another processor") {
- peek(addressNetwork_ptr, AddressMsg) {
- if (in_msg.Requestor != id) {
- trigger(in_msg.Address);
- }
- }
-}
-
-event(Data, "Data", desc="Data for this block from the data network") {
- peek(dataNetwork_ptr, DataMsg) {
- trigger(in_msg.Address);
- }
-}
-\end{verbatim}
-
-\section*{Cache Actions}
-
-Actions are the privative operations that are performed by various
-state transitions. These correspond (by convention) to the lower case
-letters in the tables. We need several actions in our protocol
-including issuing a GetX request, servicing a cache hit, send data
-from the cache to the requestor, writing data into the cache, and
-popping the various queues.
-
-The syntax of an action declaration is similar to an event
-declaration. The difference is that statements in the statement list
-are used to implement the desired action, and not triggering an event.
-
-\syntax{action({\em identifier}, {\em shorthand}, {\em pair1}, {\em pair2}, ...) \{ \\
-\hspace{.1in} {\em statement\_list} \\
-\}
-}
-
-The actions for this protocol use more of the features of the
-language. Some of the interesting case are discussed below.
-
-\begin{itemize}
-
-\item
-To manipulate values we need assignment statements (notice the use of
-{\verb+:=+} as the assignment operator). The action to write data
-into the cache looks at the incoming data message and puts the data in
-the cache. Notice the use of square brackets to lookup the block in
-the cache based on the address of the block.
-
-\begin{verbatim}
-action(w_writeDataToCache, "w", desc="Write data from data message into cache") {
- peek(dataNetwork_ptr, DataMsg) {
- cacheMemory_ptr[address].DataBlk := in_msg.DataBlk;
- }
-}
-\end{verbatim}
-
-\item
-In addition to peeking at queues, we also enqueue messages. The {\tt
-enqueue} construct works similarly to the {\tt peek} construct. {\tt
-enqueue} creates a temporary called {\tt out\_msg}. You can assign
-the fields of this message. At the end of the {\tt enqueue} construct
-the message is implicitly inserted in the outgoing queue of the
-specified network. Notice also how the type of the message is
-specified and how the assignment statements use the names of the
-fields of the messages. {\tt address} is the address for which the
-event was {\tt trigger}ed.
-
-\begin{verbatim}
-action(g_issueGETX, "g", desc="Issue GETX.") {
- enqueue(addressNetwork_ptr, AddressMsg) {
- out_msg.Address := address;
- out_msg.Type := "GETX";
- out_msg.Requestor := id;
- }
-}
-\end{verbatim}
-
-\item
-Some times we need to use both {\tt peek} and {\tt enqueue} together.
-In this example we look at an incoming address request to figure out
-who to whom to forward the data value.
-
-\begin{verbatim}
-action(r_cacheToRequestor, "r", desc="Send data from the cache to the requestor") {
- peek(addressNetwork_ptr, AddressMsg) {
- enqueue(dataNetwork_ptr, DataMsg) {
- out_msg.Address := address;
- out_msg.Destination := in_msg.Requestor;
- out_msg.DataBlk := cacheMemory_ptr[address].DataBlk;
- }
- }
-}
-\end{verbatim}
-
-\item
-We also need to pop the various queues.
-\begin{verbatim}
-action(k_popMandatoryQueue, "k", desc="Pop mandatory queue.") {
- dequeue(mandatoryQueue_ptr);
-}
-\end{verbatim}
-
-\item
-Finally we have the ability to call procedures and functions. The
-following is an example of a procedure call. Currently all of the
-procedures and functions are used to handle all of the more specific
-operations. These are currently hard coded into the generator.
-
-\begin{verbatim}
-action(h_hit, "h", desc="Service load/store from the cache.") {
- serviceLdSt(address, cacheMemory_ptr[address].DataBlk);
-}
-\end{verbatim}
-
-\end{itemize}
-
-\section*{Cache Transitions}
-
-The cross product of states and events gives us the set of possible
-transitions. For example, for our example protocol the empty would
-be:
-
-\begin{center}
-\begin{tabular}{|l||l|l|l|} \hline
- & LoadStore & Other GETX & Data \\ \hline \hline
-I & & & \\ \hline
-M & & & \\ \hline
-IM & & & \\ \hline
-\end{tabular}
-\end{center}
-
-
-Transitions are atomic and are the heart of the protocol
-specification. The transition specifies both what the next state, and
-also what actions are performed for each unique state/event pair. The
-transition declaration looks different from the other declarations:
-
-\syntax{
-transition({\em state}, {\em event}, {\em new\_state}, {\em pair1}, {\em pair2}, ...) \{ \\
-\hspace{.1in} {\em action\_identifier\_list}\\
-\}
-}
-
-{\em state} and {\em event} are the pair which uniquely identifies the
-transition. {\em state} correspond to the row where {\em event}
-selects the column. {\em new\_state} is an optional parameter. If
-{\em new\_state} is specified, that is the state when the atomic
-transition is completed. If the parameter is omitted there is assumed
-to be no state change. An impossible transition is specified by
-simply not declaring an event for that state/event pair.
-
-We also place list of actions in the curly braces. The {\em
-action\_identifier}'s correspond to the identifier specified as the
-first parameter of an action declaration. The action list is a list
-of operations to be performed when this transition occurs. The
-actions also knows what preconditions are necessary are required for
-the action to be performed. For example a necessary precondition for
-an action which sends a message is that there is a space available in
-the outgoing queue. Each transition is considered atomic, and thus
-the generated code ensures that all of the actions can be completed
-before performing and of the actions.
-
-In our running example protocol it is only possible to receive data in
-the {\em IM} state. The other seven cases can occur and are declared
-as follows. Below are a couple of examples. See the appendix for a
-complete list.
-
-\newpage
-\begin{verbatim}
-transition(I, LoadStore, IM) {
- g_issueGETX;
-}
-
-transition(M, LoadStore) {
- h_hit;
- k_popMandatoryQueue;
-}
-
-transition(M, Other_GETX, I) {
- r_cacheToRequestor;
- i_popAddressQueue;
-}
-\end{verbatim}
-
-From the above declarations we can generate a table. Each box can
-have lower case letters which corresponds to the list of actions
-possibly followed by a slash and a state (in uppercase letters). If
-there is no slash and state, the transition does not change the state.
-
-\begin{center}
-\begin{tabular}{|l||l|l|l|} \hline
- & LoadStore & Other GETX & Data \\ \hline \hline
-I & g/IM & i & (impossible)\\ \hline
-M & hk & ri/I & (impossible)\\ \hline
-IM & z & z & wj/M \\ \hline
-\end{tabular}
-\end{center}
-
-There is a useful shorthand for specifying many transitions with the
-same action. One or both of {\em event} and {\em state} can be a list
-in curly braces. This defines the cross product of the sets in one
-declaration. If no {\em new\_state} is specified none of the
-transitions cause a state change. If {\em new\_state} is specified,
-all of the transitions in the cross product of the sets has the same
-next state. For example, in the below transitions both IM/LoadStore
-and IM/Other\_GETX have the action {\tt z\_delayTrans}.
-\begin{verbatim}
-transition(IM, LoadStore) {
- z_delayTrans;
-}
-
-transition(IM, Other_GETX) {
- z_delayTrans;
-}
-\end{verbatim}
-These can be specified in a single declaration:
-\begin{verbatim}
-transition(IM, {LoadStore, Other_GETX}) {
- z_delayTrans;
-}
-\end{verbatim}
-
-
-\newpage
-\section*{Appendix - Sample Cache Controller Specification}
-
-{\small
-\begin{verbatim}
-machine(processor, "Simple MI Processor") {
-
- // AddressMsg
- new_type(AddressMsg, "AddressMsg", message="yes", desc="");
- type_field(AddressMsg, Address, "address",
- desc="Physical address for this request",
- c_type=PhysAddress, c_include="Address.hh", murphi_type="");
- type_field(AddressMsg, Type, "type",
- desc="Type of request (GetS, GetX, PutX, etc)",
- c_type=CoherenceRequestType, c_include="CoherenceRequestType.hh", murphi_type="");
- type_field(AddressMsg, Requestor, "requestor",
- desc="Node who initiated the request",
- c_type=ComponentID, c_include="ComponentID.hh", murphi_type="");
-
- // DataMsg
- new_type(DataMsg, "DataMsg", message="yes", desc="");
- type_field(DataMsg, Address, "address",
- desc="Physical address for this request",
- c_type=PhysAddress, c_include="Address.hh", murphi_type="");
- type_field(DataMsg, Destination, "destination",
- desc="Node to whom the data is sent",
- c_type=Set, c_include="Set.hh", murphi_type="");
- type_field(DataMsg, DataBlk, "data",
- desc="Node to whom the data is sent",
- c_type=DataBlock, c_include="DataBlock.hh", murphi_type="");
-
- // CacheEntry
- new_type(CacheEntry, "CacheEntry");
- type_field(CacheEntry, CacheState, "Cache state", desc="cache state",
- c_type=CacheState, c_include="CacheState.hh", murphi_type="");
- type_field(CacheEntry, DataBlk, "data", desc="data for the block",
- c_type=DataBlock, c_include="DataBlock.hh", murphi_type="");
-
- // DirectoryEntry
- new_type(DirectoryEntry, "DirectoryEntry");
- type_field(DirectoryEntry, DirectoryState, "Directory state", desc="Directory state",
- c_type=DirectoryState, c_include="DirectoryState.hh", murphi_type="");
- type_field(DirectoryEntry, DataBlk, "data", desc="data for the block",
- c_type=DataBlock, c_include="DataBlock.hh", murphi_type="");
-
-\end{verbatim}
-\newpage
-\begin{verbatim}
- // STATES
- state(I, "I", desc="Idle");
- state(M, "M", desc="Modified");
- state(IM, "IM", desc="Idle, issued request but have not seen data yet");
-
- // EVENTS
-
- // From processor
- event(LoadStore, "LoadStore", desc="Load or Store request from local processor") {
- peek(mandatoryQueue_ptr, CacheMsg) {
- trigger(in_msg.Address);
- }
- }
-
- // From Address network
- event(Other_GETX, "Other GETX", desc="Observed a GETX request from another processor") {
- peek(addressNetwork_ptr, AddressMsg) {
- if (in_msg.Requestor != id) {
- trigger(in_msg.Address);
- }
- }
- }
-
- // From Data network
- event(Data, "Data", desc="Data for this block from the data network") {
- peek(dataNetwork_ptr, DataMsg) {
- trigger(in_msg.Address);
- }
- }
-
- // ACTIONS
- action(g_issueGETX, "g", desc="Issue GETX.") {
- enqueue(addressNetwork_ptr, AddressMsg) {
- out_msg.Address := address;
- out_msg.Type := "GETX";
- out_msg.Requestor := id;
- }
- }
-
- action(h_hit, "h", desc="Service load/store from the cache.") {
- serviceLdSt(address, cacheMemory_ptr[address].DataBlk);
- }
-
- action(i_popAddressQueue, "i", desc="Pop incoming address queue.") {
- dequeue(addressNetwork_ptr);
- }
-
- action(j_popDataQueue, "j", desc="Pop incoming data queue.") {
- dequeue(dataNetwork_ptr);
- }
-
- action(k_popMandatoryQueue, "k", desc="Pop mandatory queue.") {
- dequeue(mandatoryQueue_ptr);
- }
-
- action(r_cacheToRequestor, "r", desc="Send data from the cache to the requestor") {
- peek(addressNetwork_ptr, AddressMsg) {
- enqueue(dataNetwork_ptr, DataMsg) {
- out_msg.Address := address;
- out_msg.Destination := in_msg.Requestor;
- out_msg.DataBlk := cacheMemory_ptr[address].DataBlk;
- }
- }
- }
-
- action(w_writeDataToCache, "w", desc="Write data from data message into cache") {
- peek(dataNetwork_ptr, DataMsg) {
- cacheMemory_ptr[address].DataBlk := in_msg.DataBlk;
- }
- }
-
- action(z_delayTrans, "z", desc="Cannot be handled right now.") {
- stall();
- }
-
- // TRANSITIONS
-
- // Transitions from Idle
- transition(I, LoadStore, IM) {
- g_issueGETX;
- }
-
- transition(I, Other_GETX) {
- i_popAddressQueue;
- }
-
- // Transitions from Modified
- transition(M, LoadStore) {
- h_hit;
- k_popMandatoryQueue;
- }
-
- transition(M, Other_GETX, I) {
- r_cacheToRequestor;
- i_popAddressQueue;
- }
-
- // Transitions from IM
- transition(IM, {LoadStore, Other_GETX}) {
- z_delayTrans;
- }
-
- transition(IM, Data, M) {
- w_writeDataToCache;
- j_popDataQueue;
- }
-}
-\end{verbatim}
-}
-\end{document}
-