stats: update stats for no_value -> nan

Lots of accumulated older changes too.

6 files changed, 49 insertions, 43 deletions

diff --git a/tests/quick/se/00.hello/ref/power/linux/o3-timing/config.ini b/tests/quick/se/00.hello/ref/power/linux/o3-timing/config.ini
index eed88a81d..b22bc0367 100644
--- a/tests/quick/se/00.hello/ref/power/linux/o3-timing/config.ini
+++ b/tests/quick/se/00.hello/ref/power/linux/o3-timing/config.ini
@@ -16,7 +16,6 @@ load_addr_mask=1099511627775
 mem_mode=atomic
 memories=system.physmem
 num_work_ids=16
-physmem=system.physmem
 readfile=
 symbolfile=
 work_begin_ckpt_count=0
@@ -26,7 +25,7 @@ work_cpus_ckpt_count=0
 work_end_ckpt_count=0
 work_end_exit_count=0
 work_item_id=-1
-system_port=system.membus.port[0]
+system_port=system.membus.slave[0]
 
 [system.cpu]
 type=DerivO3CPU
@@ -128,7 +127,7 @@ icache_port=system.cpu.icache.cpu_side
 
 [system.cpu.dcache]
 type=BaseCache
-addr_range=0:18446744073709551615
+addr_ranges=0:18446744073709551615
 assoc=2
 block_size=64
 forward_snoops=true
@@ -149,7 +148,7 @@ trace_addr=0
 two_queue=false
 write_buffers=8
 cpu_side=system.cpu.dcache_port
-mem_side=system.cpu.toL2Bus.port[1]
+mem_side=system.cpu.toL2Bus.slave[1]
 
 [system.cpu.dtb]
 type=PowerTLB
@@ -420,7 +419,7 @@ opLat=3
 
 [system.cpu.icache]
 type=BaseCache
-addr_range=0:18446744073709551615
+addr_ranges=0:18446744073709551615
 assoc=2
 block_size=64
 forward_snoops=true
@@ -441,7 +440,7 @@ trace_addr=0
 two_queue=false
 write_buffers=8
 cpu_side=system.cpu.icache_port
-mem_side=system.cpu.toL2Bus.port[0]
+mem_side=system.cpu.toL2Bus.slave[0]
 
 [system.cpu.interrupts]
 type=PowerInterrupts
@@ -452,7 +451,7 @@ size=64
 
 [system.cpu.l2cache]
 type=BaseCache
-addr_range=0:18446744073709551615
+addr_ranges=0:18446744073709551615
 assoc=2
 block_size=64
 forward_snoops=true
@@ -472,8 +471,8 @@ tgts_per_mshr=5
 trace_addr=0
 two_queue=false
 write_buffers=8
-cpu_side=system.cpu.toL2Bus.port[2]
-mem_side=system.membus.port[2]
+cpu_side=system.cpu.toL2Bus.master[0]
+mem_side=system.membus.slave[1]
 
 [system.cpu.toL2Bus]
 type=Bus
@@ -483,7 +482,8 @@ clock=1000
 header_cycles=1
 use_default_range=false
 width=64
-port=system.cpu.icache.mem_side system.cpu.dcache.mem_side system.cpu.l2cache.cpu_side
+master=system.cpu.l2cache.cpu_side
+slave=system.cpu.icache.mem_side system.cpu.dcache.mem_side
 
 [system.cpu.tracer]
 type=ExeTracer
@@ -515,15 +515,18 @@ clock=1000
 header_cycles=1
 use_default_range=false
 width=64
-port=system.system_port system.physmem.port[0] system.cpu.l2cache.mem_side
+master=system.physmem.port[0]
+slave=system.system_port system.cpu.l2cache.mem_side
 
 [system.physmem]
-type=PhysicalMemory
+type=SimpleMemory
+conf_table_reported=false
 file=
+in_addr_map=true
 latency=30000
 latency_var=0
 null=false
 range=0:134217727
 zero=false
-port=system.membus.port[1]
+port=system.membus.master[0]
 
diff --git a/tests/quick/se/00.hello/ref/power/linux/o3-timing/simout b/tests/quick/se/00.hello/ref/power/linux/o3-timing/simout
index a3c2e1876..7aac87cd9 100755
--- a/tests/quick/se/00.hello/ref/power/linux/o3-timing/simout
+++ b/tests/quick/se/00.hello/ref/power/linux/o3-timing/simout
@@ -1,10 +1,10 @@
 gem5 Simulator System.  http://gem5.org
 gem5 is copyrighted software; use the --copyright option for details.
 
-gem5 compiled Feb 12 2012 17:17:52
-gem5 started Feb 12 2012 18:17:19
-gem5 executing on zizzer
-command line: build/POWER/gem5.fast -d build/POWER/tests/fast/quick/se/00.hello/power/linux/o3-timing -re tests/run.py build/POWER/tests/fast/quick/se/00.hello/power/linux/o3-timing
+gem5 compiled May  8 2012 15:03:54
+gem5 started May  8 2012 15:36:49
+gem5 executing on piton
+command line: build/POWER/gem5.opt -d build/POWER/tests/opt/quick/se/00.hello/power/linux/o3-timing -re tests/run.py build/POWER/tests/opt/quick/se/00.hello/power/linux/o3-timing
 Global frequency set at 1000000000000 ticks per second
 info: Entering event queue @ 0.  Starting simulation...
 Hello world!
diff --git a/tests/quick/se/00.hello/ref/power/linux/o3-timing/stats.txt b/tests/quick/se/00.hello/ref/power/linux/o3-timing/stats.txt
index e78f47ce4..129f4d9d2 100644
--- a/tests/quick/se/00.hello/ref/power/linux/o3-timing/stats.txt
+++ b/tests/quick/se/00.hello/ref/power/linux/o3-timing/stats.txt
@@ -4,11 +4,11 @@ sim_seconds                                  0.000011                       # Nu
 sim_ticks                                    11243500                       # Number of ticks simulated
 final_tick                                   11243500                       # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
 sim_freq                                 1000000000000                       # Frequency of simulated ticks
-host_inst_rate                                 108078                       # Simulator instruction rate (inst/s)
-host_op_rate                                   108043                       # Simulator op (including micro ops) rate (op/s)
-host_tick_rate                              209380098                       # Simulator tick rate (ticks/s)
-host_mem_usage                                 207884                       # Number of bytes of host memory used
-host_seconds                                     0.05                       # Real time elapsed on the host
+host_inst_rate                                  73653                       # Simulator instruction rate (inst/s)
+host_op_rate                                    73641                       # Simulator op (including micro ops) rate (op/s)
+host_tick_rate                              142731766                       # Simulator tick rate (ticks/s)
+host_mem_usage                                 211540                       # Number of bytes of host memory used
+host_seconds                                     0.08                       # Real time elapsed on the host
 sim_insts                                        5800                       # Number of instructions simulated
 sim_ops                                          5800                       # Number of ops (including micro ops) simulated
 system.physmem.bytes_read                       28736                       # Number of bytes read from this memory
@@ -348,8 +348,8 @@ system.cpu.icache.blocked_cycles::no_mshrs            0                       #
 system.cpu.icache.blocked_cycles::no_targets            0                       # number of cycles access was blocked
 system.cpu.icache.blocked::no_mshrs                 0                       # number of cycles access was blocked
 system.cpu.icache.blocked::no_targets               0                       # number of cycles access was blocked
-system.cpu.icache.avg_blocked_cycles::no_mshrs     no_value                       # average number of cycles each access was blocked
-system.cpu.icache.avg_blocked_cycles::no_targets     no_value                       # average number of cycles each access was blocked
+system.cpu.icache.avg_blocked_cycles::no_mshrs          nan                       # average number of cycles each access was blocked
+system.cpu.icache.avg_blocked_cycles::no_targets          nan                       # average number of cycles each access was blocked
 system.cpu.icache.fast_writes                       0                       # number of fast writes performed
 system.cpu.icache.cache_copies                      0                       # number of cache copies performed
 system.cpu.icache.ReadReq_mshr_hits::cpu.inst           82                       # number of ReadReq MSHR hits
@@ -430,8 +430,8 @@ system.cpu.dcache.blocked_cycles::no_mshrs            0                       #
 system.cpu.dcache.blocked_cycles::no_targets            0                       # number of cycles access was blocked
 system.cpu.dcache.blocked::no_mshrs                 0                       # number of cycles access was blocked
 system.cpu.dcache.blocked::no_targets               0                       # number of cycles access was blocked
-system.cpu.dcache.avg_blocked_cycles::no_mshrs     no_value                       # average number of cycles each access was blocked
-system.cpu.dcache.avg_blocked_cycles::no_targets     no_value                       # average number of cycles each access was blocked
+system.cpu.dcache.avg_blocked_cycles::no_mshrs          nan                       # average number of cycles each access was blocked
+system.cpu.dcache.avg_blocked_cycles::no_targets          nan                       # average number of cycles each access was blocked
 system.cpu.dcache.fast_writes                       0                       # number of fast writes performed
 system.cpu.dcache.cache_copies                      0                       # number of cache copies performed
 system.cpu.dcache.ReadReq_mshr_hits::cpu.data           32                       # number of ReadReq MSHR hits
@@ -535,8 +535,8 @@ system.cpu.l2cache.blocked_cycles::no_mshrs            0                       #
 system.cpu.l2cache.blocked_cycles::no_targets            0                       # number of cycles access was blocked
 system.cpu.l2cache.blocked::no_mshrs                0                       # number of cycles access was blocked
 system.cpu.l2cache.blocked::no_targets              0                       # number of cycles access was blocked
-system.cpu.l2cache.avg_blocked_cycles::no_mshrs     no_value                       # average number of cycles each access was blocked
-system.cpu.l2cache.avg_blocked_cycles::no_targets     no_value                       # average number of cycles each access was blocked
+system.cpu.l2cache.avg_blocked_cycles::no_mshrs          nan                       # average number of cycles each access was blocked
+system.cpu.l2cache.avg_blocked_cycles::no_targets          nan                       # average number of cycles each access was blocked
 system.cpu.l2cache.fast_writes                      0                       # number of fast writes performed
 system.cpu.l2cache.cache_copies                     0                       # number of cache copies performed
 system.cpu.l2cache.ReadReq_mshr_misses::cpu.inst          350                       # number of ReadReq MSHR misses
diff --git a/tests/quick/se/00.hello/ref/power/linux/simple-atomic/config.ini b/tests/quick/se/00.hello/ref/power/linux/simple-atomic/config.ini
index 252e46831..0a48b581e 100644
--- a/tests/quick/se/00.hello/ref/power/linux/simple-atomic/config.ini
+++ b/tests/quick/se/00.hello/ref/power/linux/simple-atomic/config.ini
@@ -16,7 +16,6 @@ load_addr_mask=1099511627775
 mem_mode=atomic
 memories=system.physmem
 num_work_ids=16
-physmem=system.physmem
 readfile=
 symbolfile=
 work_begin_ckpt_count=0
@@ -26,7 +25,7 @@ work_cpus_ckpt_count=0
 work_end_ckpt_count=0
 work_end_exit_count=0
 work_item_id=-1
-system_port=system.membus.port[0]
+system_port=system.membus.slave[0]
 
 [system.cpu]
 type=AtomicSimpleCPU
@@ -40,6 +39,7 @@ do_checkpoint_insts=true
 do_quiesce=true
 do_statistics_insts=true
 dtb=system.cpu.dtb
+fastmem=false
 function_trace=false
 function_trace_start=0
 interrupts=system.cpu.interrupts
@@ -58,8 +58,8 @@ system=system
 tracer=system.cpu.tracer
 width=1
 workload=system.cpu.workload
-dcache_port=system.membus.port[3]
-icache_port=system.membus.port[2]
+dcache_port=system.membus.slave[2]
+icache_port=system.membus.slave[1]
 
 [system.cpu.dtb]
 type=PowerTLB
@@ -102,15 +102,18 @@ clock=1000
 header_cycles=1
 use_default_range=false
 width=64
-port=system.system_port system.physmem.port[0] system.cpu.icache_port system.cpu.dcache_port
+master=system.physmem.port[0]
+slave=system.system_port system.cpu.icache_port system.cpu.dcache_port
 
 [system.physmem]
-type=PhysicalMemory
+type=SimpleMemory
+conf_table_reported=false
 file=
+in_addr_map=true
 latency=30000
 latency_var=0
 null=false
 range=0:134217727
 zero=false
-port=system.membus.port[1]
+port=system.membus.master[0]
 
diff --git a/tests/quick/se/00.hello/ref/power/linux/simple-atomic/simout b/tests/quick/se/00.hello/ref/power/linux/simple-atomic/simout
index 2b3bb9fb6..4ba999389 100755
--- a/tests/quick/se/00.hello/ref/power/linux/simple-atomic/simout
+++ b/tests/quick/se/00.hello/ref/power/linux/simple-atomic/simout
@@ -1,10 +1,10 @@
 gem5 Simulator System.  http://gem5.org
 gem5 is copyrighted software; use the --copyright option for details.
 
-gem5 compiled Feb 11 2012 13:07:55
-gem5 started Feb 11 2012 13:55:02
-gem5 executing on zizzer
-command line: build/POWER/gem5.fast -d build/POWER/tests/fast/quick/se/00.hello/power/linux/simple-atomic -re tests/run.py build/POWER/tests/fast/quick/se/00.hello/power/linux/simple-atomic
+gem5 compiled May  8 2012 15:03:54
+gem5 started May  8 2012 15:36:50
+gem5 executing on piton
+command line: build/POWER/gem5.opt -d build/POWER/tests/opt/quick/se/00.hello/power/linux/simple-atomic -re tests/run.py build/POWER/tests/opt/quick/se/00.hello/power/linux/simple-atomic
 Global frequency set at 1000000000000 ticks per second
 info: Entering event queue @ 0.  Starting simulation...
 Hello world!
diff --git a/tests/quick/se/00.hello/ref/power/linux/simple-atomic/stats.txt b/tests/quick/se/00.hello/ref/power/linux/simple-atomic/stats.txt
index 5d83b2bac..87b1b3e66 100644
--- a/tests/quick/se/00.hello/ref/power/linux/simple-atomic/stats.txt
+++ b/tests/quick/se/00.hello/ref/power/linux/simple-atomic/stats.txt
@@ -4,10 +4,10 @@ sim_seconds                                  0.000003                       # Nu
 sim_ticks                                     2900000                       # Number of ticks simulated
 final_tick                                    2900000                       # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
 sim_freq                                 1000000000000                       # Frequency of simulated ticks
-host_inst_rate                                 430782                       # Simulator instruction rate (inst/s)
-host_op_rate                                   430227                       # Simulator op (including micro ops) rate (op/s)
-host_tick_rate                              214814147                       # Simulator tick rate (ticks/s)
-host_mem_usage                                 197864                       # Number of bytes of host memory used
+host_inst_rate                                 413372                       # Simulator instruction rate (inst/s)
+host_op_rate                                   412979                       # Simulator op (including micro ops) rate (op/s)
+host_tick_rate                              206267825                       # Simulator tick rate (ticks/s)
+host_mem_usage                                 201744                       # Number of bytes of host memory used
 host_seconds                                     0.01                       # Real time elapsed on the host
 sim_insts                                        5801                       # Number of instructions simulated
 sim_ops                                          5801                       # Number of ops (including micro ops) simulated