diff options
| -rw-r--r-- | system/alpha/console/Makefile | 14 | ||||
| -rw-r--r-- | system/alpha/console/console.c | 23 | ||||
| -rw-r--r-- | system/alpha/palcode/Makefile | 14 | ||||
| -rw-r--r-- | system/alpha/palcode/platform_m5.s | 2658 |
4 files changed, 2693 insertions, 16 deletions
diff --git a/system/alpha/console/Makefile b/system/alpha/console/Makefile index 48a6288a3..5905fa9d2 100644 --- a/system/alpha/console/Makefile +++ b/system/alpha/console/Makefile @@ -7,10 +7,8 @@ INCLUDES = -I$(PALCODE) -I$(INCLUDEH) -I$(M5)/dev SOURDIR = ./ PALCODE = ../palcode INCLUDEH = ../h -AS=alpha-elf-as -CC=alpha-elf-gcc -CXX=alpha-elf-$(CXX) - +CC=gcc +AS=gas dbmentry.o: dbmentry.s $(AS) $(INCLUDES) -nointrinsics -o $*.o $*.s @@ -22,12 +20,12 @@ printf.o: printf.c $(CC) -g3 $(INCLUDES) -nointrinsics -o $*.o -c $*.c paljtokern.s.o: paljtokern.s - $(CXX) -I ../palcode -E -P -nostdinc -nostdinc++ -x c++ paljtokern.s | \ - $(AS) -m 21164 -o paljtokern.s.o + g++ -I ../palcode -E -P -nostdinc -nostdinc++ -x c++ paljtokern.s | \ + gas -m 21164 -o paljtokern.s.o paljtoslave.s.o: paljtoslave.s - $(CXX) -I ../palcode -E -P -nostdinc -nostdinc++ -x c++ paljtoslave.s | \ - $(AS) -m 21164 -o paljtoslave.s.o + g++ -I ../palcode -E -P -nostdinc -nostdinc++ -x c++ paljtoslave.s | \ + gas -m 21164 -o paljtoslave.s.o paljtokern.c: paljtokern.s.o echo 'unsigned int palJToKern[] = {' > paljtokern.c diff --git a/system/alpha/console/console.c b/system/alpha/console/console.c index 0697be63a..844cb4ddc 100644 --- a/system/alpha/console/console.c +++ b/system/alpha/console/console.c @@ -27,7 +27,6 @@ typedef unsigned int uint32; #include "rpb.h" #include "cserve.h" - #define CONS_INT_TX 0x01 /* interrupt enable / state bits */ #define CONS_INT_RX 0x02 @@ -206,8 +205,8 @@ struct rpb xxm_rpb = { #if 0 0x12, /* 050: system type - masquarade as some random 21064 */ #endif - 12, /* masquerade a DEC_3000_500 (bugnion) */ - (2<<1), /* 058: system variation */ + 34, /* masquerade a Tsunami RGD */ + (1<<10), /* 058: system variation */ 'c'|('o'<<8)|('o'<<16)|('l'<< 24), /* 060: system revision */ 1024*4096, /* 068: scaled interval clock intr freq OVERRIDEN*/ 0, /* 070: cycle counter frequency */ @@ -1184,7 +1183,23 @@ CallBackDispatcher(long a0, long a1, long a2, long a3, long a4) long CallBackFixup(int a0, int a1, int a2) { - printf("CallbackFixup %x %x \n",a0,a1); + long temp; + /* Linux uses r8 for the current pointer (pointer to data structure + contating info about currently running process). It is set when the + kernel starts and is expected to remain there... Problem is that the + unlike the kernel, the console does not prevent the assembler from + using r8. So here is a work around. So far this has only been a problem + in CallBackFixup() but any other call back functions could cause a problem + at some point */ + + /* save off the current pointer to a temp variable */ + asm("bis $8, $31, %0" : "=r" (temp)); + + /* call original code */ + printf("CallbackFixup %x %x, t7=%x\n",a0,a1,temp); + + /* restore the current pointer */ + asm("bis %0, $31, $8" : : "r" (temp) : "$8"); #if 0 if (first[FIRST(a1)]==0) { diff --git a/system/alpha/palcode/Makefile b/system/alpha/palcode/Makefile index 071c8bc39..14a700c73 100644 --- a/system/alpha/palcode/Makefile +++ b/system/alpha/palcode/Makefile @@ -11,9 +11,10 @@ CFLAGS=-I . -E -P -D SIMOS -D BUILD_PALCODE -nostdinc -nostdinc++ -x c++ GASFLAGS=-m21164 LDFLAGS=-Ttext 0x4000 -SOURCES=osfpal.s platform_tlaser.s +SOURCES=osfpal.s platform_tlaser.s platform_m5.s PREPROC := $(SOURCES:.s=.i) -OBJS := $(SOURCES:.s=.o) +TLOBJS = osfpal.o platform_tlaser.o +TSOBJS = osfpal.o platform_m5.o %.i: %.s $(CC) $(CFLAGS) $< > $@ @@ -21,9 +22,14 @@ OBJS := $(SOURCES:.s=.o) %.o: %.i $(GAS) $(GASFLAGS) -o $@ $< +all: tlaser tsunami + +tlaser: $(PREPROC) $(TLOBJS) + $(LD) $(LDFLAGS) -o tl_osfpal $(TLOBJS) -all: $(PREPROC) $(OBJS) - $(LD) $(LDFLAGS) -o osfpal $(OBJS) +tsunami: $(PREPROC) $(TSOBJS) + $(LD) $(LDFLAGS) -o ts_osfpal $(TSOBJS) clean: rm -f *.o *.i osfpal + diff --git a/system/alpha/palcode/platform_m5.s b/system/alpha/palcode/platform_m5.s new file mode 100644 index 000000000..95f01f43a --- /dev/null +++ b/system/alpha/palcode/platform_m5.s @@ -0,0 +1,2658 @@ +// build_fixed_image: not sure what means +// real_mm to be replaced during rewrite +// remove_save_state remove_restore_state can be remooved to save space ?? + + +#define egore 0 +#define acore 0 +#define beh_model 0 +#define ev5_p2 1 +#define ev5_p1 0 +#define ldvpte_bug_fix 1 +#define spe_fix 0 +#define osf_chm_fix 0 +#define build_fixed_image 0 +#define enable_p4_fixups 0 +#define osf_svmin 1 +#define enable_physical_console 0 +#define fill_err_hack 0 +#define icflush_on_tbix 0 +#define max_cpuid 1 +#define perfmon_debug 0 +#define rax_mode 0 + +#define hw_rei_spe hw_rei + +#include "ev5_defs.h" +#include "ev5_impure.h" +#include "ev5_alpha_defs.h" +#include "ev5_paldef.h" +#include "ev5_osfalpha_defs.h" +#include "fromHudsonMacros.h" +#include "fromHudsonOsf.h" +#include "dc21164FromGasSources.h" +#include "cserve.h" +#include "tlaserreg.h" +//#include "simos.h" + + +#define ldlp ldl_p +#define ldqp ldq_p + +#define stlp stl_p +#define stqp stq_p +#define stqpc stqp + +#ifdef SIMOS +#define ldqpl ldq_p +#define sdqpl sdq_p +#else +<--bomb> +#endif + +#define pt_entInt pt_entint +#define pt_entArith pt_entarith +#define mchk_size ((mchk_cpu_base + 7 + 8) &0xfff8) +#define mchk_flag CNS_Q_FLAG +#define mchk_sys_base 56 +#define mchk_cpu_base (CNS_Q_LD_LOCK + 8) +#define mchk_offsets CNS_Q_EXC_ADDR +#define mchk_mchk_code 8 +#define mchk_ic_perr_stat CNS_Q_ICPERR_STAT +#define mchk_dc_perr_stat CNS_Q_DCPERR_STAT +#define mchk_sc_addr CNS_Q_SC_ADDR +#define mchk_sc_stat CNS_Q_SC_STAT +#define mchk_ei_addr CNS_Q_EI_ADDR +#define mchk_bc_tag_addr CNS_Q_BC_TAG_ADDR +#define mchk_fill_syn CNS_Q_FILL_SYN +#define mchk_ei_stat CNS_Q_EI_STAT +#define mchk_exc_addr CNS_Q_EXC_ADDR +#define mchk_ld_lock CNS_Q_LD_LOCK +#define osfpcb_q_Ksp pcb_q_ksp +#define pal_impure_common_size ((0x200 + 7) & 0xfff8) + +#define ALIGN_BLOCK \ + .align 5 + +#define ALIGN_BRANCH \ + .align 3 + +#define EXPORT(_x) \ + .align 5; \ + .globl _x; \ +_x: + +// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX +// XXX the following is 'made up' +// XXX bugnion + +// XXX bugnion not sure how to align 'quad' +#define ALIGN_QUAD \ + .align 3 + +#define ALIGN_128 \ + .align 7 + + +#define GET_IMPURE(_r) mfpr _r,pt_impure +#define GET_ADDR(_r1,_off,_r2) lda _r1,_off(_r2) + + +#define BIT(_x) (1<<(_x)) + + +// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX +// XXX back to original code + +// .sbttl "System specific code - beh model version" + +// +// Entry points +// SYS$CFLUSH - Cache flush +// SYS$CSERVE - Console service +// SYS$WRIPIR - interprocessor interrupts +// SYS$HALT_INTERRUPT - Halt interrupt +// SYS$PASSIVE_RELEASE - Interrupt, passive release +// SYS$INTERRUPT - Interrupt +// SYS$RESET - Reset +// SYS$ENTER_CONSOLE + +// +// Macro to read TLINTRSUMx +// +// Based on the CPU_NUMBER, read either the TLINTRSUM0 or TLINTRSUM1 register +// +// Assumed register usage: +// rsum TLINTRSUMx contents +// raddr node space address +// scratch scratch register + + +// .macro Read_TLINTRSUMx rsum, raddr, scratch, ?label1, ?label2 +// +// nop +// mfpr 'scratch', pt_whami // Get our whami (VID) +// +// extbl 'scratch', #1, 'scratch' // shift down to bit 0 +// lda 'raddr', ^xff88(r31) // Get base node space address bits +// +// sll 'raddr', #24, 'raddr' // Shift up to proper position +// srl 'scratch', #1, 'rsum' // Shift off the cpu number +// +// sll 'rsum', #22, 'rsum' // Get our node offset +// addq 'raddr', 'rsum', 'raddr' // Get our base node space address +// +// blbs 'scratch', label1 +// lda 'raddr', <tlep$tlintrsum0_offset>('raddr') +// +// br r31, label2 +//label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr') +// +//label2: ldlp 'rsum', 0('raddr') // read the right tlintrsum reg +//.endm + +#define Read_TLINTRSUMx(_rsum,_raddr,_scratch) \ + nop; \ + mfpr _scratch,pt_whami; \ + extbl _scratch,1,_scratch; \ + lda _raddr,0xff88(zero); \ + sll _raddr,24,_raddr; \ + srl _scratch,1,_rsum; \ + sll _rsum,22,_rsum; \ + addq _raddr,_rsum,_raddr; \ + blbs _scratch,1f; \ + lda _raddr,0x1180(_raddr); \ + br r31,2f; \ +1: \ + lda _raddr,0x11c0(_raddr); \ +2: ldlp _rsum,0(_raddr) + + + +// +// Macro to write TLINTRSUMx +// +// Based on the CPU_NUMBER, write either the TLINTRSUM0 or TLINTRSUM1 register +// +// Assumed register usage: +// rsum TLINTRSUMx write data +// raddr node space address +// scratch scratch register + +// .macro Write_TLINTRSUMx rsum, raddr, whami, ?label1, ?label2 +// +// nop +// mfpr 'whami', pt_whami // Get our whami (VID) +// +// extbl 'whami', #1, 'whami' // shift down to bit 0 +// lda 'raddr', ^xff88(r31) // Get base node space address bits +// +// sll 'raddr', #24, 'raddr' // Shift up to proper position +// blbs 'whami', label1 +// +// lda 'raddr', <tlep$tlintrsum0_offset>('raddr') +// br r31, label2 +// +// label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr') +// label2: srl 'whami', #1, 'whami' // Shift off the cpu number +// +// sll 'whami', #22, 'whami' // Get our node offset +// addq 'raddr', 'whami', 'raddr' // Get our base node space address +// +// mb +// stqp 'rsum', 0('raddr') // write the right tlintrsum reg +// mb +// ldqp 'rsum', 0('raddr') // dummy read to tlintrsum +// bis 'rsum', 'rsum', 'rsum' // needed to complete the ldqp above -jpo +// .endm + + +#define Write_TLINTRSUMx(_rsum,_raddr,_whami) \ + nop; \ + mfpr _whami,pt_whami; \ + extbl _whami,1,_whami; \ + lda _raddr,0xff88(zero); \ + sll _raddr,24,_raddr; \ + blbs _whami,1f; \ + lda _raddr,0x1180(_raddr);\ + br zero,2f; \ +1: lda _raddr,0x11c0(_raddr);\ +2: srl _whami,1,_whami; \ + addq _raddr,_whami,_raddr; \ + mb; \ + stqp _rsum,0(_raddr); \ + ldqp _rsum,0(_raddr); \ + bis _rsum,_rsum,_rsum + + +// +// Macro to determine highest priority TIOP Node ID from interrupt pending mask +// +// Assumed register usage: +// rmask - TLINTRSUMx contents, shifted to isolate IOx bits +// rid - TLSB Node ID of highest TIOP + +//.macro Intr_Find_TIOP rmask, rid, ?l1, ?l2, ?l3, ?l4, ?l5, ?l6 +// srl 'rmask', #4, 'rid' // check IOP8 +// blbc 'rid', l1 // not IOP8 +// +// lda 'rid', 8(r31) // IOP8 +// br r31, l6 +// +// l1: srl 'rmask', #3, 'rid' // check IOP7 +// blbc 'rid', l2 // not IOP7 +// +// lda 'rid', 7(r31) // IOP7 +// br r31, l6 +// +// l2: srl 'rmask', #2, 'rid' // check IOP6 +// blbc 'rid', l3 // not IOP6 +// +// lda 'rid', 6(r31) // IOP6 +// br r31, l6 +// +// l3: srl 'rmask', #1, 'rid' // check IOP5 +// blbc 'rid', l4 // not IOP5 +// +// lda 'rid', 5(r31) // IOP5 +// br r31, l6 +// +// l4: srl 'rmask', #0, 'rid' // check IOP4 +// blbc 'rid', l5 // not IOP4 +// +// lda r14, 4(r31) // IOP4 +// br r31, l6 +// +// l5: lda r14, 0(r31) // passive release +// l6: +// .endm + + +#define Intr_Find_TIOP(_rmask,_rid) \ + srl _rmask,3,_rid; \ + blbc _rid,1f; \ + lda _rid,8(zero); \ + br zero,6f; \ +1: srl _rmask,3,_rid; \ + blbc _rid, 2f; \ + lda _rid, 7(r31); \ + br r31, 6f; \ +2: srl _rmask, 2, _rid; \ + blbc _rid, 3f; \ + lda _rid, 6(r31); \ + br r31, 6f; \ +3: srl _rmask, 1, _rid; \ + blbc _rid, 4f; \ + lda _rid, 5(r31); \ + br r31, 6f; \ +4: srl _rmask, 0, _rid; \ + blbc _rid, 5f; \ + lda r14, 4(r31); \ + br r31, 6f; \ +5: lda r14, 0(r31); \ +6: + + + + +// +// Macro to calculate base node space address for given node id +// +// Assumed register usage: +// rid - TLSB node id +// raddr - base node space address + +//.macro Get_TLSB_Node_Address rid, raddr +// sll 'rid', #22, 'rid' // Get offset of IOP node +// lda 'raddr', ^xff88(r31) // Get base node space address bits +// +// sll 'raddr', #24, 'raddr' // Shift up to proper position +// addq 'raddr', 'rid', 'raddr' // Get TIOP node space address +// .iif ne turbo_pcia_intr_fix, srl 'rid', #22, 'rid' // Restore IOP node id +//.endm + + +#define turbo_pcia_intr_fix 0 + + +#if turbo_pcia_intr_fix != 0 +#define Get_TLSB_Node_Address(_rid,_raddr) \ + sll _rid,22,_rid; \ + lda _raddr,0xff88(zero); \ + sll _raddr,24,_raddr; \ + addq _raddr,_rid,_raddr; \ + srl _rid,22,_rid +#else +#define Get_TLSB_Node_Address(_rid,_raddr) \ + sll _rid,22,_rid; \ + lda _raddr,0xff88(zero); \ + sll _raddr,24,_raddr; \ + addq _raddr,_rid,_raddr +#endif + + + + + +// .macro mchk$TLEPstore rlog, rs, rs1, nodebase, tlepreg, clr, tlsb, crd +// .iif eq tlsb, lda 'rs1',<tlep$'tlepreg'_offset>(r31) +// .iif ne tlsb, lda 'rs1',<tlsb$'tlepreg'_offset>(r31) +// or 'rs1', 'nodebase', 'rs1' +// ldlp 'rs', 0('rs1') +// .iif eq crd, stlp 'rs', mchk$'tlepreg'('rlog') // store in frame +// .iif ne crd, stlp 'rs', mchk$crd_'tlepreg'('rlog') // store in frame +// .iif ne clr, stlp 'rs',0('rs1') // optional write to clear +// .endm + + +// .macro OSFmchk$TLEPstore tlepreg, clr=0, tlsb=0 +// mchk$TLEPstore r14, r8, r4, r13, <tlepreg>, <clr>, <tlsb>, crd=0 +// .endm + +#define CONCAT(_a,_b) _a ## _b + +#define OSFmchk_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \ + lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \ + or _rs1,_nodebase,_rs1; \ + ldlp _rs1,0(_rs1); \ + stlp _rs,CONCAT(mchk_,_tlepreg)(_rlog) + + +#define OSFmchk_TLEPstore(_tlepreg) OSFmchk_TLEPstore_1(r14,r8,r4,r13,_tlepreg) + + +// .macro OSFcrd$TLEPstore tlepreg, clr=0, tlsb=0 +// mchk$TLEPstore r14, r10, r1, r0, <tlepreg>, <clr>, <tlsb>, crd=1 +// .endm + +#define OSFcrd_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \ + lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \ + or _rs1,_nodebase,_rs1; \ + ldlp _rs1,0(_rs1); \ + stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog) + +#define OSFcrd_TLEPstore_tlsb_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \ + lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \ + or _rs1,_nodebase,_rs1; \ + ldlp _rs1,0(_rs1); \ + stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog) + +#define OSFcrd_TLEPstore_tlsb_clr_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \ + lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \ + or _rs1,_nodebase,_rs1; \ + ldlp _rs1,0(_rs1); \ + stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog); \ + stlp _rs,0(_rs1) + + +#define OSFcrd_TLEPstore(_tlepreg) OSFcrd_TLEPstore_1(r14,r8,r4,r13,_tlepreg) +#define OSFcrd_TLEPstore_tlsb(_tlepreg) OSFcrd_TLEPstore_tlsb_1(r14,r8,r4,r13,_tlepreg) +#define OSFcrd_TLEPstore_tlsb_clr(_tlepreg) OSFcrd_TLEPstore_tlsb_clr_1(r14,r8,r4,r13,_tlepreg) + + + + +// .macro save_pcia_intr irq +// and r13, #^xf, r25 // isolate low 4 bits +// addq r14, #4, r14 // format the TIOP Node id field +// sll r14, #4, r14 // shift the TIOP Node id +// or r14, r25, r10 // merge Node id/hose/HPC +// mfpr r14, pt14 // get saved value +// extbl r14, #'irq', r25 // confirm none outstanding +// bne r25, sys$machine_check_while_in_pal +// insbl r10, #'irq', r10 // align new info +// or r14, r10, r14 // merge info +// mtpr r14, pt14 // save it +// bic r13, #^xf, r13 // clear low 4 bits of vector +// .endm + +#define save_pcia_intr(_irq) \ + and r13, 0xf, r25; \ + addq r14, 4, r14; \ + sll r14, 4, r14; \ + or r14, r25, r10; \ + mfpr r14, pt14; \ + extbl r14, _irq, r25; \ + bne r25, sys_machine_check_while_in_pal; \ + insbl r10, _irq, r10; \ + or r14, r10, r14; \ + mtpr r14, pt14; \ + bic r13, 0xf, r13 + + + + ALIGN_BLOCK + +// .sbttl "wripir - PALcode for wripir instruction" +//orig SYS$WRIPIR: // R16 has the processor number. + +EXPORT(sys_wripir) + +//++ +// Convert the processor number to a CPU mask +//-- + + and r16,0xf, r14 // mask the top stuff (16 CPUs supported) + bis r31,0x1,r16 // get a one + sll r16,r14,r14 // shift the bit to the right place + +//++ +// Build the Broadcast Space base address +//-- + lda r13,0xff8e(r31) // Load the upper address bits + sll r13,24,r13 // shift them to the top + +//++ +// Send out the IP Intr +//-- + stqp r14, 0x40(r13) // Write to TLIPINTR reg WAS TLSB_TLIPINTR_OFFSET + wmb // Push out the store + + hw_rei + + + ALIGN_BLOCK +// .sbttl "CFLUSH- PALcode for CFLUSH instruction" +//+ +// SYS$CFLUSH +// Entry: +// +// R16 - contains the PFN of the page to be flushed +// +// Function: +// Flush all Dstream caches of 1 entire page +// +//- + +EXPORT(sys_cflush) + +// #convert pfn to addr, and clean off <63:20> +// #sll r16, <page_offset_size_bits>+<63-20>>, r12 + sll r16, page_offset_size_bits+(63-20),r12 + +// #ldah r13,<<1@22>+32768>@-16(r31)// + xxx<31:16> +// # stolen from srcmax code. XXX bugnion + lda r13, 0x10(r31) // assume 16Mbytes of cache + sll r13, 20, r13 // convert to bytes + + + srl r12, 63-20, r12 // shift back to normal position + xor r12, r13, r12 // xor addr<18> + + or r31, 8192/(32*8), r13 // get count of loads + nop + +cflush_loop: + subq r13, 1, r13 // decr counter + mfpr r25, ev5__intid // Fetch level of interruptor + + ldqp r31, 32*0(r12) // do a load + ldqp r31, 32*1(r12) // do next load + + ldqp r31, 32*2(r12) // do next load + ldqp r31, 32*3(r12) // do next load + + ldqp r31, 32*4(r12) // do next load + ldqp r31, 32*5(r12) // do next load + + ldqp r31, 32*6(r12) // do next load + ldqp r31, 32*7(r12) // do next load + + mfpr r14, ev5__ipl // Fetch current level + lda r12, (32*8)(r12) // skip to next cache block addr + + cmple r25, r14, r25 // R25 = 1 if intid .less than or eql ipl + beq r25, 1f // if any int's pending, re-queue CFLUSH -- need to check for hlt interrupt??? + + bne r13, cflush_loop // loop till done + hw_rei // back to user + + ALIGN_BRANCH +1: // Here if interrupted + mfpr r12, exc_addr + subq r12, 4, r12 // Backup PC to point to CFLUSH + + mtpr r12, exc_addr + nop + + mfpr r31, pt0 // Pad exc_addr write + hw_rei + + + ALIGN_BLOCK +// .sbttl "CSERVE- PALcode for CSERVE instruction" +//+ +// SYS$CSERVE +// +// Function: +// Various functions for private use of console software +// +// option selector in r0 +// arguments in r16.... +// +// +// r0 = 0 unknown +// +// r0 = 1 ldqp +// r0 = 2 stqp +// args, are as for normal STQP/LDQP in VMS PAL +// +// r0 = 3 dump_tb's +// r16 = detination PA to dump tb's to. +// +// r0<0> = 1, success +// r0<0> = 0, failure, or option not supported +// r0<63:1> = (generally 0, but may be function dependent) +// r0 - load data on ldqp +// +//- +EXPORT(sys_cserve) + +#ifdef SIMOS + /* taken from scrmax */ + cmpeq r18, CSERVE_K_RD_IMPURE, r0 + bne r0, Sys_Cserve_Rd_Impure + + cmpeq r18, CSERVE_K_JTOPAL, r0 + bne r0, Sys_Cserve_Jtopal + call_pal 0 + + or r31, r31, r0 + hw_rei // and back we go + +Sys_Cserve_Rd_Impure: + mfpr r0, pt_impure // Get base of impure scratch area. + hw_rei + + ALIGN_BRANCH + +Sys_Cserve_Jtopal: + bic a0, 3, t8 // Clear out low 2 bits of address + bis t8, 1, t8 // Or in PAL mode bit + mtpr t8,exc_addr + hw_rei + + +#else /* SIMOS */ + + cmpeq r16, cserve_ldlp, r12 // check for ldqp + bne r12, 1f // br if + + cmpeq r16, cserve_stlp, r12 // check for stqp + bne r12, 2f // br if + + cmpeq r16, cserve_callback, r12 // check for callback entry + bne r12, csrv_callback // br if + + cmpeq r16, cserve_identify, r12 // check for callback entry + bne r12, csrv_identify // br if + + or r31, r31, r0 // set failure + nop // pad palshadow write + + hw_rei // and back we go +#endif /* SIMOS */ + +// ldqp + ALIGN_QUAD +1: + ldqp r0,0(r17) // get the data + nop // pad palshadow write + + hw_rei // and back we go + + +// stqp + ALIGN_QUAD +2: + stqp r18, 0(r17) // store the data +#ifdef SIMOS + lda r0,17(r31) // bogus +#else + lda r0, CSERVE_SUCCESS(r31) // set success +#endif + hw_rei // and back we go + + + ALIGN_QUAD +csrv_callback: + ldq r16, 0(r17) // restore r16 + ldq r17, 8(r17) // restore r17 + lda r0, hlt_c_callback(r31) + br r31, sys_enter_console + + +csrv_identify: + mfpr r0, pal_base + ldqp r0, 8(r0) + hw_rei + + +// dump tb's + ALIGN_QUAD +0: + // DTB PTEs - 64 entries + addq r31, 64, r0 // initialize loop counter + nop + +1: mfpr r12, ev5__dtb_pte_temp // read out next pte to temp + mfpr r12, ev5__dtb_pte // read out next pte to reg file + + subq r0, 1, r0 // decrement loop counter + nop // Pad - no Mbox instr in cycle after mfpr + + stqp r12, 0(r16) // store out PTE + addq r16, 8 ,r16 // increment pointer + + bne r0, 1b + + ALIGN_BRANCH + // ITB PTEs - 48 entries + addq r31, 48, r0 // initialize loop counter + nop + +2: mfpr r12, ev5__itb_pte_temp // read out next pte to temp + mfpr r12, ev5__itb_pte // read out next pte to reg file + + subq r0, 1, r0 // decrement loop counter + nop // + + stqp r12, 0(r16) // store out PTE + addq r16, 8 ,r16 // increment pointer + + bne r0, 2b + or r31, 1, r0 // set success + + hw_rei // and back we go + + +// .sbttl "SYS$INTERRUPT - Interrupt processing code" + +//+ +// SYS$INTERRUPT +// +// Current state: +// Stack is pushed +// ps, sp and gp are updated +// r12, r14 - available +// r13 - INTID (new EV5 IPL) +// r25 - ISR +// r16, r17, r18 - available +// +//- + + +EXPORT(sys_interrupt) + cmpeq r13, 31, r12 + bne r12, sys_int_mchk_or_crd // Check for level 31 interrupt (machine check or crd) + + cmpeq r13, 30, r12 + bne r12, sys_int_powerfail // Check for level 30 interrupt (powerfail) + + cmpeq r13, 29, r12 + bne r12, sys_int_perf_cnt // Check for level 29 interrupt (performance counters) + + cmpeq r13, 23, r12 + bne r12, sys_int_23 // Check for level 23 interrupt + + cmpeq r13, 22, r12 + bne r12, sys_int_22 // Check for level 22 interrupt (might be + // interprocessor or timer interrupt) + + cmpeq r13, 21, r12 + bne r12, sys_int_21 // Check for level 21 interrupt + + cmpeq r13, 20, r12 + bne r12, sys_int_20 // Check for level 20 interrupt (might be corrected + // system error interrupt) + + mfpr r14, exc_addr // ooops, something is wrong + br r31, pal_pal_bug_check_from_int + + + + +//+ +//sys$int_2* +// Routines to handle device interrupts at IPL 23-20. +// System specific method to ack/clear the interrupt, detect passive release, +// detect interprocessor (22), interval clock (22), corrected +// system error (20) +// +// Current state: +// Stack is pushed +// ps, sp and gp are updated +// r12, r14 - available +// r13 - INTID (new EV5 IPL) +// r25 - ISR +// +// On exit: +// Interrupt has been ack'd/cleared +// a0/r16 - signals IO device interrupt +// a1/r17 - contains interrupt vector +// exit to ent_int address +// +//- + ALIGN_BRANCH +sys_int_23: + Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx + srl r13, 22, r13 // shift down to examine IPL17 + + Intr_Find_TIOP(r13,r14) + beq r14, 1f + + Get_TLSB_Node_Address(r14,r10) + lda r10, 0xac0(r10) // Get base TLILID address + + ldlp r13, 0(r10) // Read the TLILID register + bne r13, pal_post_dev_interrupt + +1: lda r16, osfint_c_passrel(r31) // passive release + br r31, pal_post_interrupt // + + + ALIGN_BRANCH +sys_int_22: + or r31,1,r16 // a0 means it is a I/O interrupt + lda r8,0x101(r31) + sll r8,16,r8 + lda r8,0xa000(r8) + sll r8,16,r8 + lda r8,0x080(r8) + or r31,0x10,r9 + stq_p r9, 0(r8) // clear the rtc interrupt + + br r31, pal_post_interrupt // + + + ALIGN_BRANCH +sys_int_21: + Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx + srl r13, 12, r13 // shift down to examine IPL15 + + Intr_Find_TIOP(r13,r14) + beq r14, 1f + + Get_TLSB_Node_Address(r14,r10) + lda r10, 0xa40(r10) // Get base TLILID address + + ldlp r13, 0(r10) // Read the TLILID register +#if turbo_pcia_intr_fix == 0 +//orig .if eq turbo_pcia_intr_fix + bne r13, pal_post_dev_interrupt +//orig .iff + beq r13, 1f + + and r13, 0x3, r10 // check for PCIA bits + beq r10, pal_post_dev_interrupt // done if nothing set + save_pcia_intr(1) + br r31, pal_post_dev_interrupt // +// orig .endc +#endif /* turbo_pcia_intr_fix == 0 */ + +1: lda r16, osfint_c_passrel(r31) // passive release + br r31, pal_post_interrupt // + + + ALIGN_BRANCH +sys_int_20: + or r31,3,r16 // a0 means it is a I/O interrupt + bis r31,0x801,r8 + sll r8,4,r8 + bis r8,0xa000,r8 + sll r8,4,r8 + bis r8,0x300,r8 + ldl_p r17, 0(r8) // read the drir, which is actually + // the srm vector + + br r31, pal_post_interrupt + + + ALIGN_BRANCH +pal_post_dev_interrupt: + or r13, r31, r17 // move vector to a1 + or r31, osfint_c_dev, r16 // a0 signals IO device interrupt + +pal_post_interrupt: + mfpr r12, pt_entint + + mtpr r12, exc_addr + + nop + nop + + hw_rei_spe + + + +//+ +// sys_passive_release +// Just pretend the interrupt never occurred. +//- + +EXPORT(sys_passive_release) + mtpr r11, ev5__dtb_cm // Restore Mbox current mode for ps + nop + + mfpr r31, pt0 // Pad write to dtb_cm + hw_rei + +//+ +//sys_int_powerfail +// A powerfail interrupt has been detected. The stack has been pushed. +// IPL and PS are updated as well. +// +// I'm not sure what to do here, I'm treating it as an IO device interrupt +// +//- + + ALIGN_BLOCK +sys_int_powerfail: + lda r12, 0xffc4(r31) // get GBUS_MISCR address bits + sll r12, 24, r12 // shift to proper position + ldqp r12, 0(r12) // read GBUS_MISCR + srl r12, 5, r12 // isolate bit <5> + blbc r12, 1f // if clear, no missed mchk + + // Missed a CFAIL mchk + lda r13, 0xffc7(r31) // get GBUS$SERNUM address bits + sll r13, 24, r13 // shift to proper position + lda r14, 0x40(r31) // get bit <6> mask + ldqp r12, 0(r13) // read GBUS$SERNUM + or r12, r14, r14 // set bit <6> + stqp r14, 0(r13) // clear GBUS$SERNUM<6> + mb + mb + +1: br r31, sys_int_mchk // do a machine check + + lda r17, scb_v_pwrfail(r31) // a1 to interrupt vector + mfpr r25, pt_entint + + lda r16, osfint_c_dev(r31) // a0 to device code + mtpr r25, exc_addr + + nop // pad exc_addr write + nop + + hw_rei_spe + +//+ +// sys$halt_interrupt +// A halt interrupt has been detected. Pass control to the console. +// +// +//- + EXPORT(sys_halt_interrupt) + + ldah r13, 0x1800(r31) // load Halt/^PHalt bits + Write_TLINTRSUMx(r13,r10,r14) // clear the ^PHalt bits + + mtpr r11, dtb_cm // Restore Mbox current mode + nop + nop + mtpr r0, pt0 +#ifndef SIMOS + pvc_jsr updpcb, bsr=1 + bsr r0, pal_update_pcb // update the pcb +#endif + lda r0, hlt_c_hw_halt(r31) // set halt code to hw halt + br r31, sys_enter_console // enter the console + + + +//+ +// sys$int_mchk_or_crd +// +// Current state: +// Stack is pushed +// ps, sp and gp are updated +// r12 +// r13 - INTID (new EV5 IPL) +// r14 - exc_addr +// r25 - ISR +// r16, r17, r18 - available +// +//- + ALIGN_BLOCK + +sys_int_mchk_or_crd: + srl r25, isr_v_mck, r12 + blbs r12, sys_int_mchk + //+ + // Not a Machine check interrupt, so must be an Internal CRD interrupt + //- + + mb //Clear out Cbox prior to reading IPRs + srl r25, isr_v_crd, r13 //Check for CRD + blbc r13, pal_pal_bug_check_from_int //If CRD not set, shouldn't be here!!! + + lda r9, 1(r31) + sll r9, hwint_clr_v_crdc, r9 // get ack bit for crd + mtpr r9, ev5__hwint_clr // ack the crd interrupt + + or r31, r31, r12 // clear flag + lda r9, mchk_c_ecc_c(r31) // Correctable error MCHK code + +sys_merge_sys_corr: + ldah r14, 0xfff0(r31) + mtpr r0, pt0 // save r0 for scratch + zap r14, 0xE0, r14 // Get Cbox IPR base + mtpr r1, pt1 // save r0 for scratch + + ldqp r0, ei_addr(r14) // EI_ADDR IPR + ldqp r10, fill_syn(r14) // FILL_SYN IPR + bis r0, r10, r31 // Touch lds to make sure they complete before doing scrub + + blbs r12, 1f // no scrubbing for IRQ0 case +// XXX bugnion pvc_jsr crd_scrub_mem, bsr=1 + bsr r13, sys_crd_scrub_mem // and go scrub + + // ld/st pair in scrub routine will have finished due + // to ibox stall of stx_c. Don't need another mb. + ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN + or r8, r31, r12 // Must only be executed once in this flow, and must + br r31, 2f // be after the scrub routine. + +1: ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN + // For IRQ0 CRD case only - meaningless data. + +2: mfpr r13, pt_mces // Get MCES + srl r12, ei_stat_v_ei_es, r14 // Isolate EI_STAT:EI_ES + blbc r14, 6f // branch if 630 + srl r13, mces_v_dsc, r14 // check if 620 reporting disabled + blbc r14, 5f // branch if enabled + or r13, r31, r14 // don't set SCE if disabled + br r31, 8f // continue +5: bis r13, BIT(mces_v_sce), r14 // Set MCES<SCE> bit + br r31, 8f + +6: srl r13, mces_v_dpc, r14 // check if 630 reporting disabled + blbc r14, 7f // branch if enabled + or r13, r31, r14 // don't set PCE if disabled + br r31, 8f // continue +7: bis r13, BIT(mces_v_pce), r14 // Set MCES<PCE> bit + + // Setup SCB if dpc is not set +8: mtpr r14, pt_mces // Store updated MCES + srl r13, mces_v_sce, r1 // Get SCE + srl r13, mces_v_pce, r14 // Get PCE + or r1, r14, r1 // SCE OR PCE, since they share + // the CRD logout frame + // Get base of the logout area. + GET_IMPURE(r14) // addr of per-cpu impure area + GET_ADDR(r14,(pal_logout_area+mchk_crd_base),r14) + + blbc r1, sys_crd_write_logout_frame // If pce/sce not set, build the frame + + // Set the 2nd error flag in the logout area: + + lda r1, 3(r31) // Set retry and 2nd error flags + sll r1, 30, r1 // Move to bits 31:30 of logout frame flag longword + stlp r1, mchk_crd_flag+4(r14) // store flag longword + br sys_crd_ack + +sys_crd_write_logout_frame: + // should only be here if neither the pce or sce bits are set + + //+ + // Write the mchk code to the logout area + //- + stqp r9, mchk_crd_mchk_code(r14) + + + //+ + // Write the first 2 quadwords of the logout area: + //- + lda r1, 1(r31) // Set retry flag + sll r1, 63, r9 // Move retry flag to bit 63 + lda r1, mchk_crd_size(r9) // Combine retry flag and frame size + stqp r1, mchk_crd_flag(r14) // store flag/frame size + +#ifndef SIMOS + /* needed? bugnion */ + lda r1, mchk_crd_sys_base(r31) // sys offset + sll r1, 32, r1 + lda r1, mchk_crd_cpu_base(r1) // cpu offset + stqp r1, mchk_crd_offsets(r14) // store sys offset/cpu offset into logout frame + +#endif + //+ + // Write error IPRs already fetched to the logout area + //- + stqp r0, mchk_crd_ei_addr(r14) + stqp r10, mchk_crd_fill_syn(r14) + stqp r8, mchk_crd_ei_stat(r14) + stqp r25, mchk_crd_isr(r14) + //+ + // Log system specific info here + //- +crd_storeTLEP_: + lda r1, 0xffc4(r31) // Get GBUS$MISCR address + sll r1, 24, r1 + ldqp r1, 0(r1) // Read GBUS$MISCR + sll r1, 16, r1 // shift up to proper field + mfpr r10, pt_whami // get our node id + extbl r10, 1, r10 // shift to bit 0 + or r1, r10, r1 // merge MISCR and WHAMI + stlp r1, mchk_crd_whami(r14) // write to crd logout area + srl r10, 1, r10 // shift off cpu number + + Get_TLSB_Node_Address(r10,r0) // compute our nodespace address + + OSFcrd_TLEPstore_tlsb(tldev) + OSFcrd_TLEPstore_tlsb_clr(tlber) + OSFcrd_TLEPstore_tlsb_clr(tlesr0) + OSFcrd_TLEPstore_tlsb_clr(tlesr1) + OSFcrd_TLEPstore_tlsb_clr(tlesr2) + OSFcrd_TLEPstore_tlsb_clr(tlesr3) + +sys_crd_ack: + mfpr r0, pt0 // restore r0 + mfpr r1, pt1 // restore r1 + + srl r12, ei_stat_v_ei_es, r12 + blbc r12, 5f + srl r13, mces_v_dsc, r10 // logging enabled? + br r31, 6f +5: srl r13, mces_v_dpc, r10 // logging enabled? +6: blbc r10, sys_crd_post_interrupt // logging enabled -- report it + + // logging not enabled -- + // Get base of the logout area. + GET_IMPURE(r13) // addr of per-cpu impure area + GET_ADDR(r13,(pal_logout_area+mchk_crd_base),r13) + ldlp r10, mchk_crd_rsvd(r13) // bump counter + addl r10, 1, r10 + stlp r10, mchk_crd_rsvd(r13) + mb + br r31, sys_crd_dismiss_interrupt // just return + + //+ + // The stack is pushed. Load up a0,a1,a2 and vector via entInt + // + //- + + ALIGN_BRANCH +sys_crd_post_interrupt: + lda r16, osfint_c_mchk(r31) // flag as mchk/crd in a0 + lda r17, scb_v_proc_corr_err(r31) // a1 <- interrupt vector + + blbc r12, 1f + lda r17, scb_v_sys_corr_err(r31) // a1 <- interrupt vector + +1: subq r31, 1, r18 // get a -1 + mfpr r25, pt_entInt + + srl r18, 42, r18 // shift off low bits of kseg addr + mtpr r25, exc_addr // load interrupt vector + + sll r18, 42, r18 // shift back into position + or r14, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address + + hw_rei_spe // done + + + //+ + // The stack is pushed. Need to back out of it all. + //- + +sys_crd_dismiss_interrupt: + br r31, Call_Pal_Rti + + +// .sbttl sys_crd_scrub_mem + + //+ + // + // sys_crd_scrub_mem + // called + // jsr r13, sys$crd_scrub_mem + // r0 = addr of cache block + // + //- + + + + ALIGN_BLOCK // align for branch target +sys_crd_scrub_mem: + // now find error in memory, and attempt to scrub that cache block + // This routine just scrubs the failing octaword + // Only need to "touch" one quadword per octaword to accomplish the scrub + srl r0, 39, r8 // get high bit of bad pa + blbs r8, 1f // don't attempt fixup on IO space addrs + nop // needed to align the ldqpl to octaword boundary + nop // " + + ldqpl r8, 0(r0) // attempt to read the bad memory + // location + // (Note bits 63:40,3:0 of ei_addr + // are set to 1, but as long as + // we are doing a phys ref, should + // be ok) + nop // Needed to keep the Ibox from swapping the ldqpl into E1 + + stqpc r8, 0(r0) // Store it back if it is still there. + // If store fails, location already + // scrubbed by someone else + + nop // needed to align the ldqpl to octaword boundary + + lda r8, 0x20(r31) // flip bit 5 to touch next hexaword + xor r8, r0, r0 + nop // needed to align the ldqpl to octaword boundary + nop // " + + ldqpl r8, 0(r0) // attempt to read the bad memory + // location + // (Note bits 63:40,3:0 of ei_addr + // are set to 1, but as long as + // we are doing a phys ref, should + // be ok) + nop // Needed to keep the Ibox from swapping the ldqpl into E1 + + stqpc r8, 0(r0) // Store it back if it is still there. + // If store fails, location already + // scrubbed by someone else + + lda r8, 0x20(r31) // restore r0 to original address + xor r8, r0, r0 + + //at this point, ei_stat could be locked due to a new corr error on the ld, + //so read ei_stat to unlock AFTER this routine. + +// XXX bugnion pvc$jsr crd_scrub_mem, bsr=1, dest=1 +1: ret r31, (r13) // and back we go + + +// .sbttl "SYS$INT_MCHK - MCHK Interrupt code" +//+ +// Machine check interrupt from the system. Setup and join the +// regular machine check flow. +// On exit: +// pt0 - saved r0 +// pt1 - saved r1 +// pt4 - saved r4 +// pt5 - saved r5 +// pt6 - saved r6 +// pt10 - saved exc_addr +// pt_misc<47:32> - mchk code +// pt_misc<31:16> - scb vector +// r14 - base of Cbox IPRs in IO space +// MCES<mchk> is set +//- + ALIGN_BLOCK +sys_int_mchk: + lda r14, mchk_c_sys_hrd_error(r31) + mfpr r12, exc_addr + + addq r14, 1, r14 // Flag as interrupt + nop + + sll r14, 32, r14 // Move mchk code to position + mtpr r12, pt10 // Stash exc_addr + + mfpr r12, pt_misc // Get MCES and scratch + mtpr r0, pt0 // Stash for scratch + + zap r12, 0x3c, r12 // Clear scratch + blbs r12, sys_double_machine_check // MCHK halt if double machine check + + or r12, r14, r12 // Combine mchk code + lda r14, scb_v_sysmchk(r31) // Get SCB vector + + sll r14, 16, r14 // Move SCBv to position + or r12, r14, r14 // Combine SCBv + + bis r14, BIT(mces_v_mchk), r14 // Set MCES<MCHK> bit + mtpr r14, pt_misc // Save mchk code!scbv!whami!mces + + ldah r14, 0xfff0(r31) + mtpr r1, pt1 // Stash for scratch + + zap r14, 0xE0, r14 // Get Cbox IPR base + mtpr r4, pt4 + + mtpr r5, pt5 + +#if beh_model +// .if ne beh_model + ldah r25, 0xC000(r31) // Get base of demon space + lda r25, 0x340(r25) // Add interrupt demon offset + + ldqp r13, 0(r25) // Read the control register + nop + + and r13, 0x10, r8 // For debug, check that the interrupt is expected + beq r8, interrupt_not_expected + + bic r13, 0x10, r13 + stqp r13, 0(r25) // Ack and clear the interrupt +// XXX bugnion pvc$violate 379 // stqp can't trap except replay. mt ipr only problem if mf same ipr in same shadow + .endc +#endif + + mtpr r6, pt6 + br r31, sys_mchk_collect_iprs // Join common machine check flow + + +// .sbttl "SYS$INT_PERF_CNT - Performance counter interrupt code" +//+ +//sys$int_perf_cnt +// +// A performance counter interrupt has been detected. The stack has been pushed. +// IPL and PS are updated as well. +// +// on exit to interrupt entry point ENTINT:: +// a0 = osfint$c_perf +// a1 = scb$v_perfmon (650) +// a2 = 0 if performance counter 0 fired +// a2 = 1 if performance counter 1 fired +// a2 = 2 if performance counter 2 fired +// (if more than one counter overflowed, an interrupt will be +// generated for each counter that overflows) +// +// +//- + ALIGN_BLOCK +sys_int_perf_cnt: // Performance counter interrupt + lda r17, scb_v_perfmon(r31) // a1 to interrupt vector + mfpr r25, pt_entint + + lda r16, osfint_c_perf(r31) // a0 to perf counter code + mtpr r25, exc_addr + + //isolate which perf ctr fired, load code in a2, and ack + mfpr r25, isr + or r31, r31, r18 // assume interrupt was pc0 + + srl r25, isr_v_pc1, r25 // isolate + cmovlbs r25, 1, r18 // if pc1 set, load 1 into r14 + + srl r25, 1, r25 // get pc2 + cmovlbs r25, 2, r18 // if pc2 set, load 2 into r14 + + lda r25, 1(r31) // get a one + sll r25, r18, r25 + + sll r25, hwint_clr_v_pc0c, r25 // ack only the perf counter that generated the interrupt + mtpr r25, hwint_clr + + hw_rei_spe + + + + ALIGN_BLOCK +// .sbttl "System specific RESET code" +//+ +// RESET code +// On entry: +// r1 = pal_base +8 +// +// Entry state on trap: +// r0 = whami +// r2 = base of scratch area +// r3 = halt code +// and the following 3 if init_cbox is enabled: +// r5 = sc_ctl +// r6 = bc_ctl +// r7 = bc_cnfg +// +// Entry state on switch: +// r17 - new PC +// r18 - new PCBB +// r19 - new VPTB +// +//- + +#if rax_mode==0 + .globl sys_reset +sys_reset: +// mtpr r31, ic_flush_ctl // do not flush the icache - done by hardware before SROM load + mtpr r31, itb_ia // clear the ITB + mtpr r31, dtb_ia // clear the DTB + + lda r1, -8(r1) // point to start of code + mtpr r1, pal_base // initialize PAL_BASE + + // Interrupts + mtpr r31, astrr // stop ASTs + mtpr r31, aster // stop ASTs + mtpr r31, sirr // clear software interrupts + + mtpr r0, pt1 // r0 is whami (unless we entered via swp) + +//orig ldah r1, <<1@<icsr$v_sde-16>> ! <1@<icsr$v_fpe-16>> ! <2@<icsr$v_spe-16>>>(r31) + ldah r1,(BIT(icsr_v_sde-16)|BIT(icsr_v_fpe-16)|BIT(icsr_v_spe-16+1))(zero) + +#if disable_crd == 0 +// .if eq disable_crd + bis r31, 1, r0 + sll r0, icsr_v_crde, r0 // A 1 in iscr<corr_read_enable> + or r0, r1, r1 // Set the bit +#endif + + mtpr r1, icsr // ICSR - Shadows enabled, Floating point enable, + // super page enabled, correct read per assembly option + + // Mbox/Dcache init +//orig lda r1, <1@<mcsr$v_sp1>>(r31) + lda r1,BIT(mcsr_v_sp1)(zero) + + mtpr r1, mcsr // MCSR - Super page enabled + lda r1, BIT(dc_mode_v_dc_ena)(r31) + ALIGN_BRANCH +// mtpr r1, dc_mode // turn Dcache on + nop + + mfpr r31, pt0 // No Mbox instr in 1,2,3,4 + mfpr r31, pt0 + mfpr r31, pt0 + mfpr r31, pt0 + mtpr r31, dc_flush // flush Dcache + + // build PS (IPL=7,CM=K,VMM=0,SW=0) + lda r11, 0x7(r31) // Set shadow copy of PS - kern mode, IPL=7 + lda r1, 0x1F(r31) + mtpr r1, ipl // set internal <ipl>=1F + mtpr r31, ev5__ps // set new ps<cm>=0, Ibox copy + mtpr r31, dtb_cm // set new ps<cm>=0, Mbox copy + + // Create the PALtemp pt_intmask - + // MAP: + // OSF IPL EV5 internal IPL(hex) note + // 0 0 + // 1 1 + // 2 2 + // 3 14 device + // 4 15 device + // 5 16 device + // 6 1E device,performance counter, powerfail + // 7 1F + // + + ldah r1, 0x1f1E(r31) // Create upper lw of int_mask + lda r1, 0x1615(r1) + + sll r1, 32, r1 + ldah r1, 0x1402(r1) // Create lower lw of int_mask + + lda r1, 0x0100(r1) + mtpr r1, pt_intmask // Stash in PALtemp + + // Unlock a bunch of chip internal IPRs + mtpr r31, exc_sum // clear out exeception summary and exc_mask + mfpr r31, va // unlock va, mmstat +//rig lda r8, <<1@icperr_stat$v_dpe> ! <1@icperr_stat$v_tpe> ! <1@icperr_stat$v_tmr>>(r31) + lda r8,(BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(zero) + + mtpr r8, icperr_stat // Clear Icache parity error & timeout status +//orig lda r8, <<1@dcperr_stat$v_lock> ! <1@dcperr_stat$v_seo>>(r31) + lda r8,(BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31) + + mtpr r8, dcperr_stat // Clear Dcache parity error status + + rc r0 // clear intr_flag + mtpr r31, pt_trap + + mfpr r0, pt_misc + srl r0, pt_misc_v_switch, r1 + blbs r1, sys_reset_switch // see if we got here from swppal + + // Rest of the "real" reset flow + // ASN + mtpr r31, dtb_asn + mtpr r31, itb_asn + + lda r1, 0x67(r31) + sll r1, hwint_clr_v_pc0c, r1 + mtpr r1, hwint_clr // Clear hardware interrupt requests + + lda r1, BIT(mces_v_dpc)(r31) // 1 in disable processor correctable error + mfpr r0, pt1 // get whami + insbl r0, 1, r0 // isolate whami in correct pt_misc position + or r0, r1, r1 // combine whami and mces + mtpr r1, pt_misc // store whami and mces, swap bit clear + + zapnot r3, 1, r0 // isolate halt code + mtpr r0, pt0 // save entry type + + // Cycle counter + or r31, 1, r9 // get a one + sll r9, 32, r9 // shift to <32> + mtpr r31, cc // clear Cycle Counter + mtpr r9, cc_ctl // clear and enable the Cycle Counter + mtpr r31, pt_scc // clear System Cycle Counter + + + // Misc PALtemps + mtpr r31, maf_mode // no mbox instructions for 3 cycles + or r31, 1, r1 // get bogus scbb value + mtpr r1, pt_scbb // load scbb + mtpr r31, pt_prbr // clear out prbr +#ifdef SIMOS +// or zero,kludge_initial_pcbb,r1 + GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1) +#else + mfpr r1, pal_base +//orig sget_addr r1, (kludge_initial_pcbb-pal$base), r1, verify=0// get address for temp pcbb + GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1) +#endif + mtpr r1, pt_pcbb // load pcbb + lda r1, 2(r31) // get a two + sll r1, 32, r1 // gen up upper bits + mtpr r1, mvptbr + mtpr r1, ivptbr + mtpr r31, pt_ptbr + // Performance counters + mtpr r31, pmctr + +#if init_cbox != 0 +// .if ne init_cbox + // Only init the Scache and the Bcache if there have been no previous + // cacheable dstream loads or stores. + // + // Inputs: + // r5 - sc_ctl + // r6 - bc_ctl + // r7 - bc_cnfg + + ldah r0, 0xfff0(r31) + zap r0, 0xE0, r0 // Get Cbox IPR base + ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl +temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1> + lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode) + sll r20, 1, r20 +temp = 0x017441 // default bc_config + get_addr r21, temp, r31 // create default bc_config + lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl + +// XXX bugnion pvc$jsr scbcctl, bsr=1 + bsr r10, set_sc_bc_ctl + update_bc_ctl_shadow r6, r23 // update bc_ctl shadow using r6 as input// r23 gets adjusted impure pointer + store_reg1 bc_config, r7, r23, ipr=1 // update bc_config shadow in impure area +// .endc +#endif + // Clear pmctr_ctl in impure area + +#ifndef SIMOS + // can't assemble ??? + update_pmctr_ctl r31, r1 // clear pmctr_ctl // r1 trashed +#endif + + ldah r14, 0xfff0(r31) + zap r14, 0xE0, r14 // Get Cbox IPR base +#ifndef SIMOS + ldqp r31, sc_stat(r14) // Clear sc_stat and sc_addr + ldqp r31, ei_stat(r14) + ldqp r31, ei_stat(r14) // Clear ei_stat, ei_addr, bc_tag_addr, fill_syn +#endif + GET_IMPURE(r13) + stqpc r31, 0(r13) // Clear lock_flag + + mfpr r0, pt0 // get entry type + br r31, sys_enter_console // enter the cosole + +#endif /* rax_mode == 0 */ + + + + +//.if ne rax_mode +#if rax_mode != 0 + + // For RAX: + // r0 - icsr at first, then used for cbox ipr base offset + // r2 - mcsr + // r3 - dc_mode + // r4 - maf_mode + // r5 - sc_ctl + // r6 - bc_ctl + // r7 - bc_cnfg + .globl sys_reset +sys_reset: + mtpr r31, ev5__dtb_cm // set mbox mode to kernel + mtpr r31, ev5__ps // set Ibox mode to kernel - E1 + + mtpr r0, ev5__icsr // Load ICSR - E1 + + mtpr r2, ev5__mcsr + mfpr r8, pal_base + + ldah r0, 0xfff0(r31) + zap r0, 0xE0, r0 // Get Cbox IPR base + + mtpr r31, ev5__itb_asn // clear asn - E1 + ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl + +temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1> + lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode) + sll r20, 1, r20 + +temp = 0x017441 // default bc_config + get_addr r21, temp, r31 // create default bc_config + lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl + +// XXX bugnion pvc$jsr scbcctl, bsr=1 + bsr r10, set_sc_bc_ctl + update_bc_ctl_shadow r6, r2 // initialize bc_ctl shadow// adjusted impure pointer in r2 + store_reg1 pmctr_ctl, r31, r2, ipr=1 // clear pmctr_ctl + store_reg1 bc_config, r7, r2, ipr=1 // initialize bc_config shadow + + mtpr r3, ev5__dc_mode // write dc_mode + mtpr r31, ev5__dc_flush // flush dcache + + mtpr r31, ev5__exc_sum // clear exc_sum - E1 + mtpr r31, ev5__exc_mask // clear exc_mask - E1 + + ldah r2, 4(r31) // For EXC_ADDR + mtpr r2, ev5__exc_addr // EXC_ADDR to 40000 (hex) + + mtpr r31, ev5__sirr // Clear SW interrupts (for ISP) + mtpr r4, ev5__maf_mode // write maf_mode + + mtpr r31, ev5__alt_mode // set alt_mode to kernel + mtpr r31, ev5__itb_ia // clear ITB - E1 + + lda r1, 0x1F(r31) // For IPL + mtpr r1, ev5__ipl // IPL to 1F + + mtpr r31, ev5__hwint_clr // clear hardware interrupts + mtpr r31, ev5__aster // disable AST interrupts + + mtpr r31, ev5__astrr // clear AST requests + mtpr r31, ev5__dtb_ia // clear dtb + + nop + mtpr r31, pt_trap + + srl r2, page_offset_size_bits, r9 // Start to make PTE for address 40000 + sll r9, 32, r9 + + lda r9, 0x7F01(r9) // Make PTE, V set, all RE set, all but UWE set + nop + + mtpr r9, dtb_pte // ACORE hack, load TB with 1-1 translation for address 40000 + mtpr r2, itb_tag // ACORE hack, load TB with 1-1 translation for address 40000 + + mtpr r2, dtb_tag + mtpr r9, itb_pte + + and r31, r31, r0 // clear deposited registers, note: r2 already overwritten + and r31, r31, r3 + + and r31, r31, r4 + and r31, r31, r5 + + and r31, r31, r6 + and r31, r31, r7 + + hw_rei //May need to be a rei_stall since + //we write to TB's above + //However, it currently works ok. (JH) + + +// .endc +#endif /*rax_mode != 0 */ + + + // swppal entry + // r0 - pt_misc + // r17 - new PC + // r18 - new PCBB + // r19 - new VPTB +sys_reset_switch: + or r31, 1, r9 + sll r9, pt_misc_v_switch, r9 + bic r0, r9, r0 // clear switch bit + mtpr r0, pt_misc + + rpcc r1 // get cyccounter + + ldqp r22, osfpcb_q_fen(r18) // get new fen/pme + ldlp r23, osfpcb_l_cc(r18) // get cycle counter + ldlp r24, osfpcb_l_asn(r18) // get new asn + + + ldqp r25, osfpcb_q_Mmptr(r18)// get new mmptr + sll r25, page_offset_size_bits, r25 // convert pfn to pa + mtpr r25, pt_ptbr // load the new mmptr + mtpr r18, pt_pcbb // set new pcbb + + bic r17, 3, r17 // clean use pc + mtpr r17, exc_addr // set new pc + mtpr r19, mvptbr + mtpr r19, ivptbr + + ldqp r30, osfpcb_q_Usp(r18) // get new usp + mtpr r30, pt_usp // save usp + + sll r24, dtb_asn_v_asn, r8 + mtpr r8, dtb_asn + sll r24, itb_asn_v_asn, r24 + mtpr r24, itb_asn + + mfpr r25, icsr // get current icsr + lda r24, 1(r31) + sll r24, icsr_v_fpe, r24 // 1 in icsr<fpe> position + bic r25, r24, r25 // clean out old fpe + and r22, 1, r22 // isolate new fen bit + sll r22, icsr_v_fpe, r22 + or r22, r25, r25 // or in new fpe + mtpr r25, icsr // update ibox ipr + + subl r23, r1, r1 // gen new cc offset + insll r1, 4, r1 // << 32 + mtpr r1, cc // set new offset + + or r31, r31, r0 // set success + ldqp r30, osfpcb_q_Ksp(r18) // get new ksp + mfpr r31, pt0 // stall + hw_rei_stall + +// .sbttl "SYS_MACHINE_CHECK - Machine check PAL" + ALIGN_BLOCK +//+ +//sys$machine_check +// A machine_check trap has occurred. The Icache has been flushed. +// +//- + +EXPORT(sys_machine_check) + // Need to fill up the refill buffer (32 instructions) and + // then flush the Icache again. + // Also, due to possible 2nd Cbox register file write for + // uncorrectable errors, no register file read or write for 7 cycles. + + nop + mtpr r0, pt0 // Stash for scratch -- OK if Cbox overwrites r0 later + + nop + nop + + nop + nop + + nop + nop + + nop + nop + // 10 instructions// 5 cycles + + nop + nop + + nop + nop + + // Register file can now be written + lda r0, scb_v_procmchk(r31) // SCB vector + mfpr r13, pt_mces // Get MCES + sll r0, 16, r0 // Move SCBv to correct position +// bis r13, #<1@mces$v_mchk>, r14 // Set MCES<MCHK> bit + bis r13, BIT(mces_v_mchk), r14 // Set MCES<MCHK> bit + + + zap r14, 0x3C, r14 // Clear mchk_code word and SCBv word + mtpr r14, pt_mces + // 20 instructions + + nop + or r14, r0, r14 // Insert new SCB vector + lda r0, mchk_c_proc_hrd_error(r31) // MCHK code + mfpr r12, exc_addr + + sll r0, 32, r0 // Move MCHK code to correct position + mtpr r4, pt4 + or r14, r0, r14 // Insert new MCHK code + mtpr r14, pt_misc // Store updated MCES, MCHK code, and SCBv + + ldah r14, 0xfff0(r31) + mtpr r1, pt1 // Stash for scratch - 30 instructions + + zap r14, 0xE0, r14 // Get Cbox IPR base + mtpr r12, pt10 // Stash exc_addr + + + + mtpr r31, ic_flush_ctl // Second Icache flush, now it is really flushed. + blbs r13, sys_double_machine_check // MCHK halt if double machine check + + mtpr r6, pt6 + mtpr r5, pt5 + + // Look for the powerfail cases here.... + mfpr r4, isr + srl r4, isr_v_pfl, r4 + blbc r4, sys_mchk_collect_iprs // skip if no powerfail interrupt pending + lda r4, 0xffc4(r31) // get GBUS$MISCR address bits + sll r4, 24, r4 // shift to proper position + ldqp r4, 0(r4) // read GBUS$MISCR + srl r4, 5, r4 // isolate bit <5> + blbc r4, sys_mchk_collect_iprs // skip if already cleared + // No missed CFAIL mchk + lda r5, 0xffc7(r31) // get GBUS$SERNUM address bits + sll r5, 24, r5 // shift to proper position + lda r6, 0x40(r31) // get bit <6> mask + ldqp r4, 0(r5) // read GBUS$SERNUM + or r4, r6, r6 // set bit <6> + stqp r6, 0(r5) // clear GBUS$SERNUM<6> + mb + mb + + + //+ + // Start to collect the IPRs. Common entry point for mchk flows. + // + // Current state: + // pt0 - saved r0 + // pt1 - saved r1 + // pt4 - saved r4 + // pt5 - saved r5 + // pt6 - saved r6 + // pt10 - saved exc_addr + // pt_misc<47:32> - mchk code + // pt_misc<31:16> - scb vector + // r14 - base of Cbox IPRs in IO space + // r0, r1, r4, r5, r6, r12, r13, r25 - available + // r8, r9, r10 - available as all loads are physical + // MCES<mchk> is set + // + //- + +EXPORT(sys_mchk_collect_iprs) + mb // MB before reading Scache IPRs + mfpr r1, icperr_stat + + mfpr r8, dcperr_stat + mtpr r31, dc_flush // Flush the Dcache + + mfpr r31, pt0 // Pad Mbox instructions from dc_flush + mfpr r31, pt0 + nop + nop + + ldqp r9, sc_addr(r14) // SC_ADDR IPR + bis r9, r31, r31 // Touch ld to make sure it completes before + // read of SC_STAT + ldqp r10, sc_stat(r14) // SC_STAT, also unlocks SC_ADDR + + ldqp r12, ei_addr(r14) // EI_ADDR IPR + ldqp r13, bc_tag_addr(r14) // BC_TAG_ADDR IPR + ldqp r0, fill_syn(r14) // FILL_SYN IPR + bis r12, r13, r31 // Touch lds to make sure they complete before reading EI_STAT + bis r0, r0, r31 // Touch lds to make sure they complete before reading EI_STAT + ldqp r25, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN + ldqp r31, ei_stat(r14) // Read again to insure it is unlocked + + + + + //+ + // Look for nonretryable cases + // In this segment: + // r5<0> = 1 means retryable + // r4, r6, and r14 are available for scratch + // + //- + + + bis r31, r31, r5 // Clear local retryable flag + srl r25, ei_stat_v_bc_tperr, r25 // Move EI_STAT status bits to low bits + + lda r4, 1(r31) + sll r4, icperr_stat_v_tmr, r4 + and r1, r4, r4 // Timeout reset + bne r4, sys_cpu_mchk_not_retryable + + and r8, BIT(dcperr_stat_v_lock), r4 // DCache parity error locked + bne r4, sys_cpu_mchk_not_retryable + + lda r4, 1(r31) + sll r4, sc_stat_v_sc_scnd_err, r4 + and r10, r4, r4 // 2nd Scache error occurred + bne r4, sys_cpu_mchk_not_retryable + + + bis r31, 0xa3, r4 // EI_STAT Bcache Tag Parity Error, Bcache Tag Control + // Parity Error, Interface Parity Error, 2nd Error + + and r25, r4, r4 + bne r4, sys_cpu_mchk_not_retryable + +// bis r31, #<1@<ei_stat$v_unc_ecc_err-ei_stat$v_bc_tperr>>, r4 + bis r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4 + and r25, r4, r4 // Isolate the Uncorrectable Error Bit +// bis r31, #<1@<ei_stat$v_fil_ird-ei_stat$v_bc_tperr>>, r6 + bis r31, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r6 // Isolate the Iread bit + cmovne r6, 0, r4 // r4 = 0 if IRD or if No Uncorrectable Error + bne r4, sys_cpu_mchk_not_retryable + + lda r4, 7(r31) + and r10, r4, r4 // Isolate the Scache Tag Parity Error bits + bne r4, sys_cpu_mchk_not_retryable // All Scache Tag PEs are not retryable + + + lda r4, 0x7f8(r31) + and r10, r4, r4 // Isolate the Scache Data Parity Error bits + srl r10, sc_stat_v_cbox_cmd, r6 + and r6, 0x1f, r6 // Isolate Scache Command field + subq r6, 1, r6 // Scache Iread command = 1 + cmoveq r6, 0, r4 // r4 = 0 if IRD or if No Parity Error + bne r4, sys_cpu_mchk_not_retryable + + // Look for the system unretryable cases here.... + + mfpr r4, isr // mchk_interrupt pin asserted + srl r4, isr_v_mck, r4 + blbs r4, sys_cpu_mchk_not_retryable + + + + //+ + // Look for retryable cases + // In this segment: + // r5<0> = 1 means retryable + // r6 - holds the mchk code + // r4 and r14 are available for scratch + // + //- + + + // Within the chip, the retryable cases are Istream errors + lda r4, 3(r31) + sll r4, icperr_stat_v_dpe, r4 + and r1, r4, r4 + cmovne r4, 1, r5 // Retryable if just Icache parity error + + + lda r4, 0x7f8(r31) + and r10, r4, r4 // Isolate the Scache Data Parity Error bits + srl r10, sc_stat_v_cbox_cmd, r14 + and r14, 0x1f, r14 // Isolate Scache Command field + subq r14, 1, r14 // Scache Iread command = 1 + cmovne r4, 1, r4 // r4 = 1 if Scache data parity error bit set + cmovne r14, 0, r4 // r4 = 1 if Scache PE and Iread + bis r4, r5, r5 // Accumulate + + + bis r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4 + and r25, r4, r4 // Isolate the Uncorrectable Error Bit + and r25, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r14 // Isolate the Iread bit + cmovne r4, 1, r4 // r4 = 1 if uncorr error + cmoveq r14, 0, r4 // r4 = 1 if uncorr and Iread + bis r4, r5, r5 // Accumulate + + mfpr r6, pt_misc + extwl r6, 4, r6 // Fetch mchk code + bic r6, 1, r6 // Clear flag from interrupt flow + cmovne r5, mchk_c_retryable_ird, r6 // Set mchk code + + + + // In the system, the retryable cases are ... + // (code here handles beh model read NXM) + +#if beh_model != 0 +// .if ne beh_model + ldah r4, 0xC000(r31) // Get base of demon space + lda r4, 0x550(r4) // Add NXM demon flag offset + + ldqp r4, 0(r4) // Read the demon register + lda r14, mchk_c_read_nxm(r31) + cmovlbs r4, r14, r6 // Set mchk code if read NXM + cmovlbs r4, 1, r4 + bis r4, r5, r5 // Accumulate retry bit +#endif + + + //+ + // Write the logout frame + // + // Current state: + // r0 - fill_syn + // r1 - icperr_stat + // r4 - available + // r5<0> - retry flag + // r6 - mchk code + // r8 - dcperr_stat + // r9 - sc_addr + // r10 - sc_stat + // r12 - ei_addr + // r13 - bc_tag_addr + // r14 - available + // r25 - ei_stat (shifted) + // pt0 - saved r0 + // pt1 - saved r1 + // pt4 - saved r4 + // pt5 - saved r5 + // pt6 - saved r6 + // pt10 - saved exc_addr + // + //- + +sys_mchk_write_logout_frame: + // Get base of the logout area. + GET_IMPURE(r14) // addr of per-cpu impure area + GET_ADDR(r14,pal_logout_area+mchk_mchk_base,r14) + + // Write the first 2 quadwords of the logout area: + + sll r5, 63, r5 // Move retry flag to bit 63 + lda r4, mchk_size(r5) // Combine retry flag and frame size + stqp r4, mchk_flag(r14) // store flag/frame size + lda r4, mchk_sys_base(r31) // sys offset + sll r4, 32, r4 + lda r4, mchk_cpu_base(r4) // cpu offset + stqp r4, mchk_offsets(r14) // store sys offset/cpu offset into logout frame + + //+ + // Write the mchk code to the logout area + // Write error IPRs already fetched to the logout area + // Restore some GPRs from PALtemps + //- + + mfpr r5, pt5 + stqp r6, mchk_mchk_code(r14) + mfpr r4, pt4 + stqp r1, mchk_ic_perr_stat(r14) + mfpr r6, pt6 + stqp r8, mchk_dc_perr_stat(r14) + mfpr r1, pt1 + stqp r9, mchk_sc_addr(r14) + stqp r10, mchk_sc_stat(r14) + stqp r12, mchk_ei_addr(r14) + stqp r13, mchk_bc_tag_addr(r14) + stqp r0, mchk_fill_syn(r14) + mfpr r0, pt0 + sll r25, ei_stat_v_bc_tperr, r25 // Move EI_STAT status bits back to expected position + // retrieve lower 28 bits again from ei_stat and restore before storing to logout frame + ldah r13, 0xfff0(r31) + zapnot r13, 0x1f, r13 + ldqp r13, ei_stat(r13) + sll r13, 64-ei_stat_v_bc_tperr, r13 + srl r13, 64-ei_stat_v_bc_tperr, r13 + or r25, r13, r25 + stqp r25, mchk_ei_stat(r14) + + + + + //+ + // complete the CPU-specific part of the logout frame + //- + +#ifndef SIMOS + // cant' assemble.Where is the macro ? + mchk_logout mm_stat + mchk_logout va // Unlocks VA and MM_STAT + mchk_logout isr + mchk_logout icsr + mchk_logout pal_base + mchk_logout exc_mask + mchk_logout exc_sum +#endif + + ldah r13, 0xfff0(r31) + zap r13, 0xE0, r13 // Get Cbox IPR base + ldqp r13, ld_lock(r13) // Get ld_lock IPR + stqp r13, mchk_ld_lock(r14) // and stash it in the frame + + //+ + // complete the PAL-specific part of the logout frame + //- +#ifdef vms + t = 0 + .repeat 24 + pt_mchk_logout \t + t = t + 1 + .endr +#endif +#ifndef SIMOS + //can't assemble ? + pt_mchk_logout 0 + pt_mchk_logout 1 + pt_mchk_logout 2 + pt_mchk_logout 3 + pt_mchk_logout 4 + pt_mchk_logout 5 + pt_mchk_logout 6 + pt_mchk_logout 7 + pt_mchk_logout 8 + pt_mchk_logout 9 + pt_mchk_logout 10 + pt_mchk_logout 11 + pt_mchk_logout 12 + pt_mchk_logout 13 + pt_mchk_logout 14 + pt_mchk_logout 15 + pt_mchk_logout 16 + pt_mchk_logout 17 + pt_mchk_logout 18 + pt_mchk_logout 19 + pt_mchk_logout 20 + pt_mchk_logout 21 + pt_mchk_logout 22 + pt_mchk_logout 23 +#endif + + + //+ + // Log system specific info here + //- + +#if alpha_fw != 0 +// .if ne alpha_fw +storeTLEP_: + lda r13, 0xffc4(r31) // Get GBUS$MISCR address + sll r13, 24, r13 + ldqp r13, 0(r13) // Read GBUS$MISCR + sll r13, 16, r13 // shift up to proper field + mfpr r8, pt_whami // get our node id + extbl r8, 1, r8 // shift to bit 0 + or r13, r8, r13 // merge MISCR and WHAMI + stlp r13, mchk$gbus(r14) // write to logout area + srl r8, 1, r8 // shift off cpu number + + Get_TLSB_Node_Address r8,r13 // compute our nodespace address + + OSFmchk_TLEPstore tldev, tlsb=1 + OSFmchk_TLEPstore tlber, tlsb=1, clr=1 + OSFmchk_TLEPstore tlcnr, tlsb=1 + OSFmchk_TLEPstore tlvid, tlsb=1 + OSFmchk_TLEPstore tlesr0, tlsb=1, clr=1 + OSFmchk_TLEPstore tlesr1, tlsb=1, clr=1 + OSFmchk_TLEPstore tlesr2, tlsb=1, clr=1 + OSFmchk_TLEPstore tlesr3, tlsb=1, clr=1 + OSFmchk_TLEPstore tlmodconfig + OSFmchk_TLEPstore tlepaerr, clr=1 + OSFmchk_TLEPstore tlepderr, clr=1 + OSFmchk_TLEPstore tlepmerr, clr=1 + OSFmchk_TLEPstore tlintrmask0 + OSFmchk_TLEPstore tlintrmask1 + OSFmchk_TLEPstore tlintrsum0 + OSFmchk_TLEPstore tlintrsum1 + OSFmchk_TLEPstore tlep_vmg +// .endc +#endif /*alpha_fw != 0 */ + // Unlock IPRs + lda r8, (BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31) + mtpr r8, dcperr_stat // Clear Dcache parity error status + + lda r8, (BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(r31) + mtpr r8, icperr_stat // Clear Icache parity error & timeout status + +1: ldqp r8, mchk_ic_perr_stat(r14) // get ICPERR_STAT value + GET_ADDR(r0,0x1800,r31) // get ICPERR_STAT value + and r0, r8, r0 // compare + beq r0, 2f // check next case if nothing set + lda r0, mchk_c_retryable_ird(r31) // set new MCHK code + br r31, do_670 // setup new vector + +2: ldqp r8, mchk_dc_perr_stat(r14) // get DCPERR_STAT value + GET_ADDR(r0,0x3f,r31) // get DCPERR_STAT value + and r0, r8, r0 // compare + beq r0, 3f // check next case if nothing set + lda r0, mchk_c_dcperr(r31) // set new MCHK code + br r31, do_670 // setup new vector + +3: ldqp r8, mchk_sc_stat(r14) // get SC_STAT value + GET_ADDR(r0,0x107ff,r31) // get SC_STAT value + and r0, r8, r0 // compare + beq r0, 4f // check next case if nothing set + lda r0, mchk_c_scperr(r31) // set new MCHK code + br r31, do_670 // setup new vector + +4: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value + GET_ADDR(r0,0x30000000,r31) // get EI_STAT value + and r0, r8, r0 // compare + beq r0, 5f // check next case if nothing set + lda r0, mchk_c_bcperr(r31) // set new MCHK code + br r31, do_670 // setup new vector + +5: ldlp r8, mchk_tlber(r14) // get TLBER value + GET_ADDR(r0,0xfe01,r31) // get high TLBER mask value + sll r0, 16, r0 // shift into proper position + GET_ADDR(r1,0x03ff,r31) // get low TLBER mask value + or r0, r1, r0 // merge mask values + and r0, r8, r0 // compare + beq r0, 6f // check next case if nothing set + GET_ADDR(r0, 0xfff0, r31) // set new MCHK code + br r31, do_660 // setup new vector + +6: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value + GET_ADDR(r0,0xff7f,r31) // get TLEPAERR mask value + and r0, r8, r0 // compare + beq r0, 7f // check next case if nothing set + GET_ADDR(r0, 0xfffa, r31) // set new MCHK code + br r31, do_660 // setup new vector + +7: ldlp r8, mchk_tlepderr(r14) // get TLEPDERR value + GET_ADDR(r0,0x7,r31) // get TLEPDERR mask value + and r0, r8, r0 // compare + beq r0, 8f // check next case if nothing set + GET_ADDR(r0, 0xfffb, r31) // set new MCHK code + br r31, do_660 // setup new vector + +8: ldlp r8, mchk_tlepmerr(r14) // get TLEPMERR value + GET_ADDR(r0,0x3f,r31) // get TLEPMERR mask value + and r0, r8, r0 // compare + beq r0, 9f // check next case if nothing set + GET_ADDR(r0, 0xfffc, r31) // set new MCHK code + br r31, do_660 // setup new vector + +9: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value + GET_ADDR(r0,0xb,r31) // get EI_STAT mask value + sll r0, 32, r0 // shift to upper lw + and r0, r8, r0 // compare + beq r0, 1f // check next case if nothing set + GET_ADDR(r0,0xfffd,r31) // set new MCHK code + br r31, do_660 // setup new vector + +1: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value + GET_ADDR(r0,0x80,r31) // get TLEPAERR mask value + and r0, r8, r0 // compare + beq r0, cont_logout_frame // check next case if nothing set + GET_ADDR(r0, 0xfffe, r31) // set new MCHK code + br r31, do_660 // setup new vector + +do_670: lda r8, scb_v_procmchk(r31) // SCB vector + br r31, do_6x0_cont +do_660: lda r8, scb_v_sysmchk(r31) // SCB vector +do_6x0_cont: + sll r8, 16, r8 // shift to proper position + mfpr r1, pt_misc // fetch current pt_misc + GET_ADDR(r4,0xffff, r31) // mask for vector field + sll r4, 16, r4 // shift to proper position + bic r1, r4, r1 // clear out old vector field + or r1, r8, r1 // merge in new vector + mtpr r1, pt_misc // save new vector field + stlp r0, mchk_mchk_code(r14) // save new mchk code + +cont_logout_frame: + // Restore some GPRs from PALtemps + mfpr r0, pt0 + mfpr r1, pt1 + mfpr r4, pt4 + + mfpr r12, pt10 // fetch original PC + blbs r12, sys_machine_check_while_in_pal // MCHK halt if machine check in pal + +//XXXbugnion pvc_jsr armc, bsr=1 + bsr r12, sys_arith_and_mchk // go check for and deal with arith trap + + mtpr r31, exc_sum // Clear Exception Summary + + mfpr r25, pt10 // write exc_addr after arith_and_mchk to pickup new pc + stqp r25, mchk_exc_addr(r14) + + //+ + // Set up the km trap + //- + + +sys_post_mchk_trap: + mfpr r25, pt_misc // Check for flag from mchk interrupt + extwl r25, 4, r25 + blbs r25, sys_mchk_stack_done // Stack from already pushed if from interrupt flow + + bis r14, r31, r12 // stash pointer to logout area + mfpr r14, pt10 // get exc_addr + + sll r11, 63-3, r25 // get mode to msb + bge r25, 3f + + mtpr r31, dtb_cm + mtpr r31, ev5__ps + + mtpr r30, pt_usp // save user stack + mfpr r30, pt_ksp + +3: + lda sp, 0-osfsf_c_size(sp) // allocate stack space + nop + + stq r18, osfsf_a2(sp) // a2 + stq r11, osfsf_ps(sp) // save ps + + stq r14, osfsf_pc(sp) // save pc + mfpr r25, pt_entint // get the VA of the interrupt routine + + stq r16, osfsf_a0(sp) // a0 + lda r16, osfint_c_mchk(r31) // flag as mchk in a0 + + stq r17, osfsf_a1(sp) // a1 + mfpr r17, pt_misc // get vector + + stq r29, osfsf_gp(sp) // old gp + mtpr r25, exc_addr // + + or r31, 7, r11 // get new ps (km, high ipl) + subq r31, 1, r18 // get a -1 + + extwl r17, 2, r17 // a1 <- interrupt vector + bis r31, ipl_machine_check, r25 + + mtpr r25, ipl // Set internal ipl + srl r18, 42, r18 // shift off low bits of kseg addr + + sll r18, 42, r18 // shift back into position + mfpr r29, pt_kgp // get the kern r29 + + or r12, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address + hw_rei_spe // out to interrupt dispatch routine + + + //+ + // The stack is pushed. Load up a0,a1,a2 and vector via entInt + // + //- + ALIGN_BRANCH +sys_mchk_stack_done: + lda r16, osfint_c_mchk(r31) // flag as mchk/crd in a0 + lda r17, scb_v_sysmchk(r31) // a1 <- interrupt vector + + subq r31, 1, r18 // get a -1 + mfpr r25, pt_entInt + + srl r18, 42, r18 // shift off low bits of kseg addr + mtpr r25, exc_addr // load interrupt vector + + sll r18, 42, r18 // shift back into position + or r14, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address + + hw_rei_spe // done + + + ALIGN_BRANCH +sys_cpu_mchk_not_retryable: + mfpr r6, pt_misc + extwl r6, 4, r6 // Fetch mchk code + br r31, sys_mchk_write_logout_frame // + + + +//+ +//sys$double_machine_check - a machine check was started, but MCES<MCHK> was +// already set. We will now double machine check halt. +// +// pt0 - old R0 +// +//+ + +EXPORT(sys_double_machine_check) +#ifndef SIMOS + pvc$jsr updpcb, bsr=1 + bsr r0, pal_update_pcb // update the pcb +#endif + lda r0, hlt_c_dbl_mchk(r31) + br r31, sys_enter_console + +//+ +//sys$machine_check_while_in_pal - a machine check was started, exc_addr points to +// a PAL PC. We will now machine check halt. +// +// pt0 - old R0 +// +//+ +sys_machine_check_while_in_pal: + stqp r12, mchk_exc_addr(r14) // exc_addr has not yet been written + +#ifndef SIMOS + pvc$jsr updpcb, bsr=1 + bsr r0, pal_update_pcb // update the pcb +#endif + lda r0, hlt_c_mchk_from_pal(r31) + br r31, sys_enter_console + + +//ARITH and MCHK +// Check for arithmetic errors and build trap frame, +// but don't post the trap. +// on entry: +// pt10 - exc_addr +// r12 - return address +// r14 - logout frame pointer +// r13 - available +// r8,r9,r10 - available except across stq's +// pt0,1,6 - available +// +// on exit: +// pt10 - new exc_addr +// r17 = exc_mask +// r16 = exc_sum +// r14 - logout frame pointer +// + ALIGN_BRANCH +sys_arith_and_mchk: + mfpr r13, ev5__exc_sum + srl r13, exc_sum_v_swc, r13 + bne r13, handle_arith_and_mchk + +// XXX bugnion pvc$jsr armc, bsr=1, dest=1 + ret r31, (r12) // return if no outstanding arithmetic error + +handle_arith_and_mchk: + mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - + // no virt ref for next 2 cycles + mtpr r14, pt0 + + mtpr r1, pt1 // get a scratch reg + and r11, osfps_m_mode, r1 // get mode bit + + bis r11, r31, r25 // save ps + beq r1, 1f // if zero we are in kern now + + bis r31, r31, r25 // set the new ps + mtpr r30, pt_usp // save user stack + + mfpr r30, pt_ksp // get kern stack +1: + mfpr r14, exc_addr // get pc into r14 in case stack writes fault + + lda sp, 0-osfsf_c_size(sp) // allocate stack space + mtpr r31, ev5__ps // Set Ibox current mode to kernel + + mfpr r1, pt_entArith + stq r14, osfsf_pc(sp) // save pc + + stq r17, osfsf_a1(sp) + mfpr r17, ev5__exc_mask // Get exception register mask IPR - no mtpr exc_sum in next cycle + + stq r29, osfsf_gp(sp) + stq r16, osfsf_a0(sp) // save regs + + bis r13, r31, r16 // move exc_sum to r16 + stq r18, osfsf_a2(sp) + + stq r11, osfsf_ps(sp) // save ps + mfpr r29, pt_kgp // get the kern gp + + mfpr r14, pt0 // restore logout frame pointer from pt0 + bis r25, r31, r11 // set new ps + + mtpr r1, pt10 // Set new PC + mfpr r1, pt1 + +// XXX bugnion pvc$jsr armc, bsr=1, dest=1 + ret r31, (r12) // return if no outstanding arithmetic error + + + +// .sbttl "SYS$ENTER_CONSOLE - Common PALcode for ENTERING console" + + ALIGN_BLOCK + +// SYS$enter_console +// +// Entry: +// Entered when PAL wants to enter the console. +// usually as the result of a HALT instruction or button, +// or catastrophic error. +// +// Regs on entry... +// +// R0 = halt code +// pt0 <- r0 +// +// Function: +// +// Save all readable machine state, and "call" the console +// +// Returns: +// +// +// Notes: +// +// In these routines, once the save state routine has been executed, +// the remainder of the registers become scratchable, as the only +// "valid" copy of them is the "saved" copy. +// +// Any registers or PTs that are modified before calling the save +// routine will have there data lost. The code below will save all +// state, but will loose pt 0,4,5. +// +//- + +EXPORT(sys_enter_console) + mtpr r1, pt4 + mtpr r3, pt5 +#ifdef SIMOS + subq r31, 1, r1 + sll r1, 42, r1 + ldah r1, 1(r1) +#else /* SIMOS */ + lda r3, pal_enter_console_ptr(r31) //find stored vector + ldqp r1, 0(r3) +#endif /* SIMOS */ + +#ifdef SIMOS + /* taken from scrmax, seems like the obvious thing to do */ + mtpr r1, exc_addr + mfpr r1, pt4 + mfpr r3, pt5 + STALL + STALL + hw_rei_stall +#else + pvc$violate 1007 + jmp r31, (r1) // off to common routine +#endif + + +// .sbttl "SYS$EXIT_CONSOLE - Common PALcode for ENTERING console" +//+ +// sys$exit_console +// +// Entry: +// Entered when console wants to reenter PAL. +// usually as the result of a CONTINUE. +// +// +// Regs' on entry... +// +// +// Function: +// +// Restore all readable machine state, and return to user code. +// +// +// +//- + ALIGN_BLOCK +sys_exit_console: + //Disable physical mode: +#if enable_physical_console != 0 +// .if ne enable_physical_console + mfpr r25, pt_ptbr + bic r25, 1, r25 // clear physical console flag + mtpr r25, pt_ptbr +#endif + + GET_IMPURE(r1) + + // clear lock and intr_flags prior to leaving console + rc r31 // clear intr_flag + // lock flag cleared by restore_state +#ifndef SIMOS + pvc$jsr rststa, bsr=1 + bsr r3, pal_restore_state // go restore all state + // note, R1 and R3 are NOT restored + // by restore_state. +#endif + // TB's have been flushed + + ldqp r3, (cns_gpr+(8*3))(r1) // restore r3 + ldqp r1, (cns_gpr+8)(r1) // restore r1 + hw_rei_stall // back to user + +#if turbo_pcia_intr_fix != 0 +// .if ne turbo_pcia_intr_fix +check_pcia_intr: + mfpr r14, pt14 // fetch saved PCIA interrupt info + beq r14, check_done // don't bother checking if no info + mfpr r13, ipl // check the current IPL + bic r13, 3, r25 // isolate ipl<5:2> + cmpeq r25, 0x14, r25 // is it an I/O interrupt? + beq r25, check_done // no, return + and r13, 3, r25 // get I/O interrupt index + extbl r14, r25, r13 // extract info for this interrupt + beq r13, check_done // if no info, return + + // This is an RTI from a PCIA interrupt + lda r12, 1(r31) // get initial bit mask + sll r12, r25, r25 // shift to select interrupt index + zap r14, r25, r14 // clear out info from this interrupt + mtpr r14, pt14 // and save it + + and r13, 3, r25 // isolate HPC field + subq r25, 1, r25 // subtract 1 to get HPC number + srl r13, 2, r13 // generate base register address + sll r13, 6, r13 // get slot/hose address bits + lda r13, 0x38(r13) // insert other high bits + sll r13, 28, r13 // shift high bits into position + + // Read the IPROGx register + sll r25, 21, r14 // HPC address bit position + or r13, r14, r14 // add in upper bits + lda r14, 0x400(r14) // add in lower bits + ldqp r14, 0(r14) // read IPROG + srl r14, 4, r12 // check the In Progress bit + blbc r12, 1f // skip if none in progress + and r14, 0xf, r14 // isolate interrupt source + lda r12, 1(r31) // make initial mask + sll r12, r14, r14 // shift to make new intr source mask + br r31, 2f + // Write the SMPLIRQx register +1: or r31, r31, r14 // default interrupt source mask +2: GET_ADDR(r12, 0xffff, r31) // default SMPLIRQx data + bic r12, r14, r12 // clear any interrupts in progres +//orig lda r14, <0xbffc@-2>(r31) // get register address bits + lda r14,(0xbffc>>2)(r31) + + sll r14, 10, r14 // shift into position + or r14, r13, r14 // add in upper bits + sll r25, 8, r25 // shift HPC number into position + or r14, r25, r14 // add in lower bits + stqp r12, 0(r14) // write SMPLIRQx register + mb + ldqp r12, 0(r14) // read it back + bis r12, r12, r12 // touch register to insure completion + +check_done: // do these now and return + lda r25, osfsf_c_size(sp) // get updated sp + bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr + br r31, pcia_check_return +#endif + + +// .sbttl KLUDGE_INITIAL_PCBB - PCB for Boot use only + + ALIGN_128 + +kludge_initial_pcbb: // PCB is 128 bytes long +// .repeat 16 +// .quad 0 +// .endr + + nop + nop + nop + nop + + nop + nop + nop + nop + + nop + nop + nop + nop + + nop + nop + nop + nop + +// .sbttl "SET_SC_BC_CTL subroutine" +// +// Subroutine to set the SC_CTL, BC_CONFIG, and BC_CTL registers and flush the Scache +// There must be no outstanding memory references -- istream or dstream -- when +// these registers are written. EV5 prefetcher is difficult to turn off. So, +// this routine needs to be exactly 32 instructions long// the final jmp must +// be in the last octaword of a page (prefetcher doesn't go across page) +// +// +// Register expecations: +// r0 base address of CBOX iprs +// r5 value to set sc_ctl to (flush bit is added in) +// r6 value to set bc_ctl to +// r7 value to set bc_config to +// r10 return address +// r19 old sc_ctl value +// r20 old value of bc_ctl +// r21 old value of bc_config +// r23 flush scache flag +// Register usage: +// r17 sc_ctl with flush bit cleared +// r22 loop address +// +// +#ifndef SIMOS + align_page <32*4> // puts start of routine at next page boundary minus 32 longwords. +#endif + +set_sc_bc_ctl: + +#ifndef SIMOS + br r22, sc_ctl_loop //this branch must be in the same 4 instruction block as it's dest +sc_ctl_loop: +// XXX bugnion pvc$jsr scloop, dest=1 + mb + mb + + bis r5, r23, r5 //r5 <- same sc_ctl with flush bit set (if flag set in r23) + + stqp r19, ev5__sc_ctl(r0) // write sc_ctl + stqp r20, ev5__bc_ctl(r0) // write bc_ctl + bis r31, r6, r20 // update r20 with new bc_ctl for 2nd time through loop + stqp r21, bc_config(r0) // write bc_config register + bis r31, r7, r21 // update r21 with new bc_config for 2nd time through loop + + bic r19, BIT(sc_ctl_v_sc_flush), r17 //r17 <- same sc_ctl without flush bit set + //NOTE: only works because flush bit is in lower 16 bits + + wmb // don't merge with other writes + stqp r17, ev5__sc_ctl(r0) // write sc_ctl without flush bit + ldqp r17, ev5__sc_ctl(r0) // read sc_ctl + bis r17, r17, r17 // stall until the data comes back + bis r31, r5, r19 // update r19 with new sc_ctl for 2nd time through loop + + // fill with requisite number of nops (unops ok) to make exactly 32 instructions in loop + t = 0 + .repeat 15 + unop + t = t + 1 + .endr + $opdef mnemonic= myjmp, - + format= <custom=iregister, iregister, branch_offset>, - + encoding= <26:31=0x1A, 21:25=%OP1,16:20=%OP2,14:15=0x00,0:13=%op3> + +// XXXbugnion pvc$jsr scloop + myjmp r22,r22,sc_ctl_loop // first time, jump to sc_ctl_loop (hint will cause prefetcher to go to loop instead + // of straight) // r22 gets sc_ctl_done + // 2nd time, code continues at sc_ctl_done (I hope) +sc_ctl_done: +// XXX bugnion pvc$jsr scloop, dest=1 +// XXX bugnion pvc$jsr scbcctl +#endif /*SIMOS*/ + ret r31, (r10) // return to where we came from + + +.end + + + + |