diff options
27 files changed, 3066 insertions, 20210 deletions
diff --git a/system/alpha/console/Makefile b/system/alpha/console/Makefile index ca61a0fe3..728ab7a8d 100644 --- a/system/alpha/console/Makefile +++ b/system/alpha/console/Makefile @@ -1,44 +1,41 @@ -#Copyright (c) 2005 -#The Regents of The University of Michigan -#All Rights Reserved +# Copyright (c) 2005 +# The Regents of The University of Michigan +# All Rights Reserved # -#This code is part of the M5 simulator, developed by Nathan Binkert, -#Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions -#from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew -#Schultz. +# This code is part of the M5 simulator, developed by Nathan Binkert, +# Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions +# from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew +# Schultz. # -#Permission is granted to use, copy, create derivative works and -#redistribute this software and such derivative works for any purpose, -#so long as the copyright notice above, this grant of permission, and -#the disclaimer below appear in all copies made; and so long as the -#name of The University of Michigan is not used in any advertising or -#publicity pertaining to the use or distribution of this software -#without specific, written prior authorization. +# Permission is granted to use, copy, create derivative works and +# redistribute this software and such derivative works for any purpose, +# so long as the copyright notice above, this grant of permission, and +# the disclaimer below appear in all copies made; and so long as the +# name of The University of Michigan is not used in any advertising or +# publicity pertaining to the use or distribution of this software +# without specific, written prior authorization. # -#THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE -#UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT -#WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER EXPRESS OR -#IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF -#MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REGENTS OF -#THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, -#INCLUDING DIRECT, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL -#DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR IN CONNECTION -#WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS HEREAFTER -#ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. - -DBMENTRY = fffffc0000010000 -CFLAGS=-I . -I ../h -I$(M5)/dev -nostdinc++ -Wa,-m21164 - -ARCHNAME=$(shell uname -m) +# THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE +# UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT +# WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER EXPRESS OR +# IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REGENTS OF +# THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, +# INCLUDING DIRECT, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL +# DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR IN CONNECTION +# WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS HEREAFTER +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ### If we are not compiling on an alpha, we must use cross tools ### -ifneq ($(ARCHNAME), alpha) +ifneq ($(shell uname -m), alpha) CROSS_COMPILE?=alpha-unknown-linux-gnu- endif CC=$(CROSS_COMPILE)gcc AS=$(CROSS_COMPILE)as LD=$(CROSS_COMPILE)ld +DBMENTRY= fffffc0000010000 +CFLAGS=-I . -I ../h -I$(M5)/dev -fno-builtin -Wa,-m21164 OBJS=dbmentry.o printf.o paljtokern.o paljtoslave.o TLOBJS+=$(OBJS) console_tl.o TSOBJS+=$(OBJS) console_ts.o @@ -54,19 +51,19 @@ all: console_tl console_ts $(CC) $(CFLAGS) -nostdinc -o $@ -c $< console_ts.o: console.c - $(CC) -g3 $(CFLAGS) -D _TIME_T -D TSUNAMI -o $@ -c $< + $(CC) -g3 $(CFLAGS) -D TSUNAMI -o $@ -c $< console_tl.o: console.c - $(CC) -g3 $(CFLAGS) -D _TIME_T -D TLASER -o $@ -c $< + $(CC) -g3 $(CFLAGS) -D TLASER -o $@ -c $< printf.o: printf.c $(CC) -g3 $(CFLAGS) -o $@ -c $< console_ts: $(TSOBJS) - $(LD) -o console_ts -N -Ttext $(DBMENTRY) -non_shared $(TSOBJS) -lc + $(LD) -o console_ts -N -Ttext $(DBMENTRY) -non_shared $(TSOBJS) -lc console_tl: $(TLOBJS) - $(LD) -o console_tl -N -Ttext $(DBMENTRY) -non_shared $(TLOBJS) -lc + $(LD) -o console_tl -N -Ttext $(DBMENTRY) -non_shared $(TLOBJS) -lc clean: rm -f *.o console_t? diff --git a/system/alpha/console/console.c b/system/alpha/console/console.c index f51d958c0..1cd5f1a6c 100644 --- a/system/alpha/console/console.c +++ b/system/alpha/console/console.c @@ -1,85 +1,77 @@ /* -Copyright (c) 2003, 2004 -The Regents of The University of Michigan -All Rights Reserved - -This code is part of the M5 simulator, developed by Nathan Binkert, -Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions -from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew -Schultz. - -Permission is granted to use, copy, create derivative works and -redistribute this software and such derivative works for any purpose, -so long as the copyright notice above, this grant of permission, and -the disclaimer below appear in all copies made; and so long as the -name of The University of Michigan is not used in any advertising or -publicity pertaining to the use or distribution of this software -without specific, written prior authorization. - -THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE -UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT -WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER EXPRESS OR -IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REGENTS OF -THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, -INCLUDING DIRECT, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL -DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR IN CONNECTION -WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS HEREAFTER -ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. -*/ + * Copyright (c) 2003, 2004 + * The Regents of The University of Michigan + * All Rights Reserved + * + * This code is part of the M5 simulator, developed by Nathan Binkert, + * Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions + * from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew + * Schultz. + * + * Permission is granted to use, copy, create derivative works and + * redistribute this software and such derivative works for any purpose, + * so long as the copyright notice above, this grant of permission, and + * the disclaimer below appear in all copies made; and so long as the + * name of The University of Michigan is not used in any advertising or + * publicity pertaining to the use or distribution of this software + * without specific, written prior authorization. + * + * THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE + * UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT + * WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER EXPRESS OR + * IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REGENTS OF + * THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, + * INCLUDING DIRECT, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL + * DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR IN CONNECTION + * WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS HEREAFTER + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + */ + /* -Copyright 1993 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ -/* ****************************************** - * SimOS SRM Console + * Copyright 1993 Hewlett-Packard Development Company, L.P. * - * Derived from Lance Berc's SRM console - * for the SRC XXM Machine - * ******************************************/ + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +/* ****************************************** + * M5 Console + * ******************************************/ -typedef unsigned long long uint64_t; -typedef unsigned long long uint64; -typedef unsigned int uint32_t; -typedef unsigned int uint32; +#include <linux/stddef.h> +#include <sys/types.h> #define CONSOLE #include "alpha_access.h" - -#if 0 -#include "new_aouthdr.h" -#include "srcmax.h" -#endif - -/* from ../h */ -#include "lib.h" -#include "rpb.h" #include "cserve.h" +#include "rpb.h" #define CONS_INT_TX 0x01 /* interrupt enable / state bits */ #define CONS_INT_RX 0x02 +#define PAGE_SIZE (8192) + #define KSEG 0xfffffc0000000000 #define K1BASE 0xfffffc8000000000 -#define KSEG_TO_PHYS(x)(((ul)x) & ~KSEG) +#define KSEG_TO_PHYS(x) (((ulong)x) & ~KSEG) #ifdef TSUNAMI #define ALPHA_ACCESS_BASE 0xfffffd0200000000 @@ -89,295 +81,258 @@ typedef unsigned int uint32; #error TSUNAMI/TLASER not defined. #endif -#define PHYS_TO_K1(_x) (K1BASE|(_x)) +#define ROUNDUP8(x) ((ulong)(((ulong)x)+7) & ~7) +#define ROUNDUP128(x) ((ulong)(((ulong)x) + 127) & ~127) +#define ROUNDUP8K(x) ((ulong)(((ulong)(x)) + 8191) & ~8191) -#define AOUT_LOAD_ADDR (KSEG|0xf000) - -#define ROUNDUP8(x) ((ul)(((ul)x)+7) & ~7) -#define ROUNDUP128(x) ((ul)(((ul)x)+127) & ~127) -#define ROUNDUP8K(x) ((ul)(((ul)(x))+8191) & ~8191) - -#define FIRST(x) ((((ul)(x)) >> 33) & 0x3ff) -#define SECOND(x) ((((ul)(x)) >> 23) & 0x3ff) -#define THIRD(x) ((((ul)(x)) >> 13) & 0x3ff) -#define THIRD_XXX(x) ((((ul)(x)) >> 13) & 0xfff) -#define PFN(x) ((((ul)(x) & ~KSEG) >> 13)) +#define FIRST(x) ((((ulong)(x)) >> 33) & 0x3ff) +#define SECOND(x) ((((ulong)(x)) >> 23) & 0x3ff) +#define THIRD(x) ((((ulong)(x)) >> 13) & 0x3ff) +#define THIRD_XXX(x) ((((ulong)(x)) >> 13) & 0xfff) +#define PFN(x) ((((ulong)(x) & ~KSEG) >> 13)) /* Kernel write | kernel read | valid */ -#define KPTE(x) ((ul)((((ul)(x)) << 32) | 0x1101)) +#define KPTE(x) ((ulong)((((ulong)(x)) << 32) | 0x1101)) #define HWRPB_PAGES 16 #define MDT_BITMAP_PAGES 4 -#define CSERVE_K_JTOKERN 0x18 - #define NUM_KERNEL_THIRD (4) -#define printf_lock(args...) \ - do { \ - SpinLock(&theLock); \ - printf(args); \ - SpinUnlock(&theLock); \ +#define printf_lock(args...) \ + do { \ + SpinLock(&theLock); \ + printf(args); \ + SpinUnlock(&theLock); \ } while (0) -static unixBoot(int go, int argc, char **argv); -void jToPal(ul bootadr); +void unixBoot(int go, int argc, char **argv); +void JToKern(char *bootadr, ulong rpb_percpu, ulong free_pfn, ulong k_argc, + char **k_argv, char **envp); +void JToPal(ulong bootadr); void SlaveLoop(int cpu); +struct AlphaAccess m5Conf; -struct AlphaAccess simosConf; - -/* ************************************************************** - * Console callbacks use VMS calling conventions - * read AXP manual, 2-64. - * ***************************************************************/ -typedef struct OpenVMSFunc { - long dummy; - long func; -}OpenVMSFunc; - -OpenVMSFunc callbackFunc, fixupFunc; +ulong theLock; - - - -ul theLock; - - -extern void SpinLock(ul *lock); +extern void SpinLock(ulong *lock); #define SpinUnlock(_x) *(_x) = 0; struct _kernel_params { - char *bootadr; - ul rpb_percpu; - ul free_pfn; - ul argc; - ul argv; - ul envp; /* NULL */ + char *bootadr; + ulong rpb_percpu; + ulong free_pfn; + ulong argc; + ulong argv; + ulong envp; /* NULL */ }; - extern consoleCallback[]; extern consoleFixup[]; long CallBackDispatcher(); long CallBackFixup(); /* - * simos console output + * m5 console output */ -void InitConsole(void) +void +InitConsole() { -#if 0 - CDR->intr_status =(DevRegister)(DEV_CNSLE_RX_INTR |DEV_CNSLE_TX_INTR); -#endif } -char GetChar() +char +GetChar() { - struct AlphaAccess *k1Conf = (struct AlphaAccess *)(ALPHA_ACCESS_BASE); - return k1Conf->inputChar; + struct AlphaAccess *k1Conf = (struct AlphaAccess *)(ALPHA_ACCESS_BASE); + return k1Conf->inputChar; } -void PutChar(char c) +void +PutChar(char c) { -#if 0 - CDR->data = c; -#endif -#if 0 - *(int*) PHYS_TO_K1(SLOT_D_COM1<<5) = c; -#endif - struct AlphaAccess *k1Conf = (struct AlphaAccess *)(ALPHA_ACCESS_BASE); - k1Conf->outputChar = c; - + struct AlphaAccess *k1Conf = (struct AlphaAccess *)(ALPHA_ACCESS_BASE); + k1Conf->outputChar = c; } - int passArgs(int argc) -{ return 0; } +{ + return 0; +} int main(int argc, char **argv) { - int x,i; - struct AlphaAccess *k1Conf = (struct AlphaAccess *)(ALPHA_ACCESS_BASE); - ui *k1ptr,*ksegptr; - - - InitConsole(); - printf_lock("M5 console\n"); - /* - * get configuration from backdoor - */ - simosConf.last_offset = k1Conf->last_offset; - printf_lock("Got Configuration %d \n",simosConf.last_offset); - - simosConf.last_offset = k1Conf->last_offset; - simosConf.version = k1Conf->version; - simosConf.numCPUs = k1Conf->numCPUs; - simosConf.intrClockFrequency = k1Conf->intrClockFrequency; - simosConf.cpuClock = k1Conf->cpuClock; - simosConf.mem_size = k1Conf->mem_size; - simosConf.kernStart = k1Conf->kernStart; - simosConf.kernEnd = k1Conf->kernEnd; - simosConf.entryPoint = k1Conf->entryPoint; - simosConf.diskUnit = k1Conf->diskUnit; - simosConf.diskCount = k1Conf->diskCount; - simosConf.diskPAddr = k1Conf->diskPAddr; - simosConf.diskBlock = k1Conf->diskBlock; - simosConf.diskOperation = k1Conf->diskOperation; - simosConf.outputChar = k1Conf->outputChar; - simosConf.inputChar = k1Conf->inputChar; - simosConf.bootStrapImpure = k1Conf->bootStrapImpure; - simosConf.bootStrapCPU = k1Conf->bootStrapCPU; - - if (simosConf.version != ALPHA_ACCESS_VERSION) { - panic("Console version mismatch. Console expects %d. has %d \n", - ALPHA_ACCESS_VERSION,simosConf.version); - } - - - /* - * setup arguments to kernel - */ - unixBoot(1,argc,argv); - - x = *(volatile int *)(K1BASE-4); - while(1) continue; - return x; + int x, i; + struct AlphaAccess *k1Conf = (struct AlphaAccess *)(ALPHA_ACCESS_BASE); + uint *k1ptr, *ksegptr; + + InitConsole(); + printf_lock("M5 console\n"); + + /* + * get configuration from backdoor + */ + m5Conf.last_offset = k1Conf->last_offset; + printf_lock("Got Configuration %d\n", m5Conf.last_offset); + + m5Conf.last_offset = k1Conf->last_offset; + m5Conf.version = k1Conf->version; + m5Conf.numCPUs = k1Conf->numCPUs; + m5Conf.intrClockFrequency = k1Conf->intrClockFrequency; + m5Conf.cpuClock = k1Conf->cpuClock; + m5Conf.mem_size = k1Conf->mem_size; + m5Conf.kernStart = k1Conf->kernStart; + m5Conf.kernEnd = k1Conf->kernEnd; + m5Conf.entryPoint = k1Conf->entryPoint; + m5Conf.diskUnit = k1Conf->diskUnit; + m5Conf.diskCount = k1Conf->diskCount; + m5Conf.diskPAddr = k1Conf->diskPAddr; + m5Conf.diskBlock = k1Conf->diskBlock; + m5Conf.diskOperation = k1Conf->diskOperation; + m5Conf.outputChar = k1Conf->outputChar; + m5Conf.inputChar = k1Conf->inputChar; + m5Conf.bootStrapImpure = k1Conf->bootStrapImpure; + m5Conf.bootStrapCPU = k1Conf->bootStrapCPU; + + if (m5Conf.version != ALPHA_ACCESS_VERSION) { + panic("Console version mismatch. Console expects %d. has %d \n", + ALPHA_ACCESS_VERSION, m5Conf.version); + } + + /* + * setup arguments to kernel + */ + unixBoot(1, argc, argv); + + x = *(volatile int *)(K1BASE-4); + while (1) + continue; + return x; } /* * BOOTING */ -struct rpb xxm_rpb = { - NULL, /* 000: physical self-reference */ - ((long)'H') | (((long)'W') << 8) | (((long)'R') << 16) | - ((long)'P' << 24) | (((long)'B') << 32), /* 008: contains string "HWRPB" */ - 6, /* 010: HWRPB version number */ - /* the byte count is wrong, but who needs it? - lance */ - 0, /* 018: bytes in RPB perCPU CTB CRB MEDSC */ - 0, /* 020: primary cpu id */ - 8192, /* 028: page size in bytes */ - 43, /* 030: number of phys addr bits */ - 127, /* 038: max valid ASN */ - {'0', '0', '0', '0', '0', '0', '0', '0', '0', '0', '0', '0', '0', '0', '0', '1'}, /* 040: system serial num: 10 ascii chars */ -#ifdef undef -/* To be legitimate, the following system type and variation are correct for the XXM. - But there are too many #ifdefs etc to deal with in Unix, so we tell the kernel - that we're an Avanti, which is similar enough. - */ - 31, /* 050: system type - XXM is now in the Alpha SRM */ - (1 << 10) | (2<<1),/* 058: system variation - XXM w/EV5 & embeded console */ -#endif -#if 0 - 0x12, /* 050: system type - masquarade as some random 21064 */ -#endif - 0, /* OVERRIDDEN */ - (1<<10), /* 058: system variation OVERRIDDEN */ - 'c'|('o'<<8)|('o'<<16)|('l'<< 24), /* 060: system revision */ - 1024*4096, /* 068: scaled interval clock intr freq OVERRIDEN*/ - 0, /* 070: cycle counter frequency */ - 0x200000000, /* 078: virtual page table base */ - 0, /* 080: reserved */ - 0, /* 088: offset to translation buffer hint */ - 1, /* 090: number of processor slots OVERRIDDEN*/ - sizeof(struct rpb_percpu), /* 098: per-cpu slot size. OVERRIDDEN */ - 0, /* 0A0: offset to per_cpu slots */ - 1, /* 0A8: number of CTBs */ -#ifdef bugnion_gone - sizeof(struct rpb_ctb), /* 0B0: bytes in largest CTB */ -#else - sizeof(struct ctb_tt), -#endif - 0, /* 0B8: offset to CTB (cons term block) */ - 0, /* 0C0: offset to CRB (cons routine block) */ - 0, /* 0C8: offset to memory descriptor table */ - 0, /* 0D0: offset to config data block */ - 0, /* 0D8: offset to FRU table */ - 0, /* 0E0: virt addr of save term routine */ - 0, /* 0E8: proc value for save term routine */ - 0, /* 0F0: virt addr of restore term routine */ - 0, /* 0F8: proc value for restore term routine */ - 0, /* 100: virt addr of CPU restart routine */ - 0, /* 108: proc value for CPU restart routine */ - 0, /* 110: used to determine presence of kdebug */ - 0, /* 118: reserved for hardware */ +struct rpb m5_rpb = { + NULL, /* 000: physical self-reference */ + ((long)'H') | (((long)'W') << 8) | (((long)'R') << 16) | + ((long)'P' << 24) | (((long)'B') << 32), /* 008: contains "HWRPB" */ + 6, /* 010: HWRPB version number */ + /* the byte count is wrong, but who needs it? - lance */ + 0, /* 018: bytes in RPB perCPU CTB CRB MEDSC */ + 0, /* 020: primary cpu id */ + PAGE_SIZE, /* 028: page size in bytes */ + 43, /* 030: number of phys addr bits */ + 127, /* 038: max valid ASN */ + {'0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','1'}, + /* 040: system serial num: 10 ascii chars */ + 0, /* OVERRIDDEN */ + (1<<10), /* 058: system variation */ + 'c'|('o'<<8)|('o'<<16)|('l'<< 24), /* 060: system revision */ + 1024*4096, /* 068: scaled interval clock intr freq */ + 0, /* 070: cycle counter frequency */ + 0x200000000, /* 078: virtual page table base */ + 0, /* 080: reserved */ + 0, /* 088: offset to translation buffer hint */ + 1, /* 090: number of processor slots OVERRIDDEN*/ + sizeof(struct rpb_percpu), /* 098: per-cpu slot size. OVERRIDDEN */ + 0, /* 0A0: offset to per_cpu slots */ + 1, /* 0A8: number of CTBs */ + sizeof(struct ctb_tt), + 0, /* 0B8: offset to CTB (cons term block) */ + 0, /* 0C0: offset to CRB (cons routine block) */ + 0, /* 0C8: offset to memory descriptor table */ + 0, /* 0D0: offset to config data block */ + 0, /* 0D8: offset to FRU table */ + 0, /* 0E0: virt addr of save term routine */ + 0, /* 0E8: proc value for save term routine */ + 0, /* 0F0: virt addr of restore term routine */ + 0, /* 0F8: proc value for restore term routine */ + 0, /* 100: virt addr of CPU restart routine */ + 0, /* 108: proc value for CPU restart routine */ + 0, /* 110: used to determine presence of kdebug */ + 0, /* 118: reserved for hardware */ /* the checksum is wrong, but who needs it? - lance */ - 0, /* 120: checksum of prior entries in rpb */ - 0, /* 128: receive ready bitmask */ - 0, /* 130: transmit ready bitmask */ - 0, /* 138: Dynamic System Recog. offset */ + 0, /* 120: checksum of prior entries in rpb */ + 0, /* 128: receive ready bitmask */ + 0, /* 130: transmit ready bitmask */ + 0, /* 138: Dynamic System Recog. offset */ }; -ul xxm_tbb[] = { 0x1e1e1e1e1e1e1e1e, 0x1e1e1e1e1e1e1e1e, 0x1e1e1e1e1e1e1e1e, 0x1e1e1e1e1e1e1e1e, - 0x1e1e1e1e1e1e1e1e, 0x1e1e1e1e1e1e1e1e, 0x1e1e1e1e1e1e1e1e, 0x1e1e1e1e1e1e1e1e}; - -struct rpb_percpu xxm_rpb_percpu = { - {0,0,0,0,0,0,1,{0,0},{0,0,0,0,0,0,0,0}}, /* 000: boot/restart HWPCB */ - (STATE_PA | STATE_PP | STATE_CV | STATE_PV | STATE_PMV | STATE_PL), /* 080: per-cpu state bits */ - 0xc000, /* 088: palcode memory length */ - 0x2000, /* 090: palcode scratch length */ - 0x4000, /* 098: phys addr of palcode mem space */ - 0x2000, /* 0A0: phys addr of palcode scratch space */ - (2 << 16) | (5 << 8) | 1, /* 0A8: PALcode rev required */ - 11 | (2L << 32), /* 0B0: processor type */ - 7, /* 0B8: processor variation */ - 'M'|('5'<<8)|('A'<<16)|('0'<<24), /* 0C0: processor revision */ - {'M','5','/','A','l','p','h','a','0','0','0','0','0','0','0','0'}, /* 0C8: proc serial num: 10 ascii chars */ - 0, /* 0D8: phys addr of logout area */ - 0, /* 0E0: length in bytes of logout area */ - 0, /* 0E8: halt pcb base */ - 0, /* 0F0: halt pc */ - 0, /* 0F8: halt ps */ - 0, /* 100: halt arg list (R25) */ - 0, /* 108: halt return address (R26) */ - 0, /* 110: halt procedure value (R27) */ - 0, /* 118: reason for halt */ - 0, /* 120: for software */ - {0}, /* 128: inter-console communications buffer */ - {1,0,5,0,0,0,0,0,0,0,0,0,0,0,0,0}, /* 1D0: PALcode revs available */ - 0 /* 250: reserved for arch use */ +ulong m5_tbb[] = { 0x1e1e1e1e1e1e1e1e, 0x1e1e1e1e1e1e1e1e, + 0x1e1e1e1e1e1e1e1e, 0x1e1e1e1e1e1e1e1e, + 0x1e1e1e1e1e1e1e1e, 0x1e1e1e1e1e1e1e1e, + 0x1e1e1e1e1e1e1e1e, 0x1e1e1e1e1e1e1e1e }; + +struct rpb_percpu m5_rpb_percpu = { + {0,0,0,0,0,0,1,{0,0},{0,0,0,0,0,0,0,0}}, /* 000: boot/restart HWPCB */ + (STATE_PA | STATE_PP | STATE_CV | + STATE_PV | STATE_PMV | STATE_PL), /* 080: per-cpu state bits */ + 0xc000, /* 088: palcode memory length */ + 0x2000, /* 090: palcode scratch length */ + 0x4000, /* 098: paddr of pal mem space */ + 0x2000, /* 0A0: paddr of pal scratch space */ + (2 << 16) | (5 << 8) | 1, /* 0A8: PALcode rev required */ + 11 | (2L << 32), /* 0B0: processor type */ + 7, /* 0B8: processor variation */ + 'M'|('5'<<8)|('A'<<16)|('0'<<24), /* 0C0: processor revision */ + {'M','5','/','A','l','p','h','a','0','0','0','0','0','0','0','0'}, + /* 0C8: proc serial num: 10 chars */ + 0, /* 0D8: phys addr of logout area */ + 0, /* 0E0: len in bytes of logout area */ + 0, /* 0E8: halt pcb base */ + 0, /* 0F0: halt pc */ + 0, /* 0F8: halt ps */ + 0, /* 100: halt arg list (R25) */ + 0, /* 108: halt return address (R26) */ + 0, /* 110: halt procedure value (R27) */ + 0, /* 118: reason for halt */ + 0, /* 120: for software */ + {0}, /* 128: inter-console comm buffer */ + {1,0,5,0,0,0,0,0,0,0,0,0,0,0,0,0}, /* 1D0: PALcode revs available */ + 0 /* 250: reserved for arch use */ /* the dump stack grows from the end of the rpb page not to reach here */ }; -struct _xxm_rpb_mdt { - long rpb_checksum; /* 000: checksum of entire mem desc table */ - long rpb_impaddr; /* 008: PA of implementation dep info */ - long rpb_numcl; /* 010: number of clusters */ - struct rpb_cluster rpb_cluster[3]; /* first instance of a cluster */ +struct _m5_rpb_mdt { + long rpb_checksum; /* 000: checksum of entire mem desc table */ + long rpb_impaddr; /* 008: PA of implementation dep info */ + long rpb_numcl; /* 010: number of clusters */ + struct rpb_cluster rpb_cluster[3]; /* first instance of a cluster */ }; -struct _xxm_rpb_mdt xxm_rpb_mdt = { - 0, /* 000: checksum of entire mem desc table */ - 0, /* 008: PA of implementation dep info */ - 0, /* 010: number of clusters */ - {{ 0, /* 000: starting PFN of this cluster */ +struct _m5_rpb_mdt m5_rpb_mdt = { + 0, /* 000: checksum of entire mem desc table */ + 0, /* 008: PA of implementation dep info */ + 0, /* 010: number of clusters */ + {{ 0, /* 000: starting PFN of this cluster */ 0, /* 008: count of PFNs in this cluster */ 0, /* 010: count of tested PFNs in cluster */ 0, /* 018: va of bitmap */ 0, /* 020: pa of bitmap */ 0, /* 028: checksum of bitmap */ 1 /* 030: usage of cluster */ - }, - { 0, /* 000: starting PFN of this cluster */ - 0, /* 008: count of PFNs in this cluster */ - 0, /* 010: count of tested PFNs in cluster */ - 0, /* 018: va of bitmap */ - 0, /* 020: pa of bitmap */ - 0, /* 028: checksum of bitmap */ - 0 /* 030: usage of cluster */ - }, - { 0, /* 000: starting PFN of this cluster */ - 0, /* 008: count of PFNs in this cluster */ - 0, /* 010: count of tested PFNs in cluster */ - 0, /* 018: va of bitmap */ - 0, /* 020: pa of bitmap */ - 0, /* 028: checksum of bitmap */ - 0 /* 030: usage of cluster */ - }} + }, + { 0, /* 000: starting PFN of this cluster */ + 0, /* 008: count of PFNs in this cluster */ + 0, /* 010: count of tested PFNs in cluster */ + 0, /* 018: va of bitmap */ + 0, /* 020: pa of bitmap */ + 0, /* 028: checksum of bitmap */ + 0 /* 030: usage of cluster */ + }, + { 0, /* 000: starting PFN of this cluster */ + 0, /* 008: count of PFNs in this cluster */ + 0, /* 010: count of tested PFNs in cluster */ + 0, /* 018: va of bitmap */ + 0, /* 020: pa of bitmap */ + 0, /* 028: checksum of bitmap */ + 0 /* 030: usage of cluster */ + }} }; /* constants for slotinfo bus_type subfield */ @@ -386,643 +341,524 @@ struct _xxm_rpb_mdt xxm_rpb_mdt = { #define SLOTINFO_EISA 2 #define SLOTINFO_PCI 3 -struct rpb_ctb xxm_rpb_ctb = { - CONS_DZ, /* 000: console type */ - 0, /* 008: console unit */ - 0, /* 010: reserved */ - 0 /* 018: byte length of device dep portion */ +struct rpb_ctb m5_rpb_ctb = { + CONS_DZ, /* 000: console type */ + 0, /* 008: console unit */ + 0, /* 010: reserved */ + 0 /* 018: byte length of device dep portion */ }; /* we don't do any fixup (aka relocate the console) - we hope */ -struct rpb_crb xxm_rpb_crb = { - 0, /* va of call-back dispatch rtn */ - 0, /* pa of call-back dispatch rtn */ - 0, /* va of call-back fixup rtn */ - 0, /* pa of call-back fixup rtn */ - 0, /* number of entries in phys/virt map */ - 0 /* Number of pages to be mapped */ +struct rpb_crb m5_rpb_crb = { + 0, /* va of call-back dispatch rtn */ + 0, /* pa of call-back dispatch rtn */ + 0, /* va of call-back fixup rtn */ + 0, /* pa of call-back fixup rtn */ + 0, /* number of entries in phys/virt map */ + 0 /* Number of pages to be mapped */ }; struct _rpb_name { - unsigned long length; - char name[16]; + ulong length; + char name[16]; }; -extern struct _rpb_name xxm_name; +extern struct _rpb_name m5_name; -struct rpb_dsr xxm_rpb_dsr = { - 0, - 0, - 0, +struct rpb_dsr m5_rpb_dsr = { + 0, + 0, + 0, }; -struct _rpb_name xxm_name = { - 16, - {'D','E','C',' ','S','R','C',' ','X','X','M',' ','D','G','C',0}, +struct _rpb_name m5_name = { + 16, + {'U','M','I','C','H',' ','M','5','/','A','L','P','H','A',' ',0}, }; -/* XXM has one LURT entry - 1050 is for workstations, 1100 is servers (and is needed for CXX) */ -long xxm_lurt[10] = { 9, 12, -1, -1, -1, -1, -1, -1, 1100, 1100 }; +/* + * M5 has one LURT entry: + * 1050 is for workstations + * 1100 is servers (and is needed for CXX) + */ +long m5_lurt[10] = { 9, 12, -1, -1, -1, -1, -1, -1, 1100, 1100 }; + +ulong unix_boot_mem; +ulong bootadr; -ul unix_boot_mem; -unsigned long bootadr; -#if 0 -unsigned long aout_bss_addr, aout_bss_size, aout_entry, aout_text_start, aout_data_addr; -#endif char **kargv; int kargc; -ul free_pfn; +ulong free_pfn; struct rpb_percpu *rpb_percpu; - #define MAX_CPUS 32 -ul bootStrapImpure[MAX_CPUS]; +ulong bootStrapImpure[MAX_CPUS]; - -char *unix_boot_alloc(int pages) +char * +unix_boot_alloc(int pages) { - char *ret = (char *) unix_boot_mem; - unix_boot_mem += (pages * 8192); - return ret; + char *ret = (char *) unix_boot_mem; + unix_boot_mem += (pages * PAGE_SIZE); + return ret; } -ul *first = 0; -ul *third_rpb = 0; -ul *reservedFixup = 0; +ulong *first = 0; +ulong *third_rpb = 0; +ulong *reservedFixup = 0; int strcpy(char *dst, char *src); struct rpb *rpb; +extern ulong _end; +void unixBoot(int go, int argc, char **argv) { - ul *second, *third_kernel, ptr, *tbb, size, *percpu_logout; - unsigned char *mdt_bitmap; - long *lp1, *lp2, sum; - int i, cl; - int kern_first_page; - int mem_size = simosConf.mem_size; - - int mem_pages = mem_size / 8192, cons_pages; - ul kernel_bytes, ksp, kernel_end, *unix_kernel_stack, bss, ksp_bottom, ksp_top; - struct rpb_ctb *rpb_ctb; - struct ctb_tt *ctb_tt; - struct rpb_dsr *rpb_dsr; - struct rpb_crb *rpb_crb; - struct _xxm_rpb_mdt *rpb_mdt; - int *rpb_lurt; - char *rpb_name; - ul nextPtr; - - printf_lock( "memsize %x pages %x \n",mem_size,mem_pages); - - - -#ifdef notnow - if (unixArgs()) return; -#endif - - /* Allocate: - * two pages for the HWRPB - * five page table pages: - * 1: First level page table - * 1: Second level page table - * 1: Third level page table for HWRPB - * 2: Third level page table for kernel (for up to 16MB) - * set up the page tables - * load the kernel at the physical address 0x230000 - * build the HWRPB - * set up memory descriptor table to give up the - * physical memory between the end of the page - * tables and the start of the kernel - * enable kseg addressing - * jump to the kernel - */ - - unix_boot_mem = ROUNDUP8K(&_end); - - printf_lock("First free page after ROM 0x%x\n", unix_boot_mem); - - rpb = (struct rpb *) unix_boot_alloc( HWRPB_PAGES); - - mdt_bitmap = (unsigned char *) unix_boot_alloc(MDT_BITMAP_PAGES); - first = (ul *)unix_boot_alloc(1); - second = (ul *)unix_boot_alloc(1); - third_rpb = (ul *)unix_boot_alloc(1); - reservedFixup = (ul*) unix_boot_alloc(1); - third_kernel = (ul *)unix_boot_alloc(NUM_KERNEL_THIRD); - percpu_logout = (ul*)unix_boot_alloc(1); - - - cons_pages = KSEG_TO_PHYS(unix_boot_mem) / 8192; - - /* Set up the page tables */ - bzero((char *)first, 8192); - bzero((char *)second, 8192); - bzero((char *)reservedFixup,8192); - bzero((char *)third_rpb, HWRPB_PAGES * 8192); - bzero((char *)third_kernel, 8192 * NUM_KERNEL_THIRD); - - first[0] = KPTE(PFN(second)); - first[1] = KPTE(PFN(first)); /* Region 3 */ - - second[SECOND(0x10000000)] = KPTE(PFN(third_rpb)); /* Region 0 */ - - for (i=0;i<NUM_KERNEL_THIRD;i++) { - second[SECOND(0x20000000)+i] = KPTE(PFN(third_kernel)+i); /* Region 1 */ - } - second[SECOND(0x40000000)] = KPTE(PFN(second)); /* Region 2 */ - - - { - - /* For some obscure reason, Dec Unix's database read - * from /etc/sysconfigtab is written to this fixed - * mapped memory location. Go figure, since it is - * not initialized by the console. Maybe it is - * to look at the database from the console - * after a boot/crash. - * - * Black magic to estimate the max size. SEGVs on overflow - * bugnion - */ + ulong *second, *third_kernel, ptr, *tbb, size, *percpu_logout; + unsigned char *mdt_bitmap; + long *lp1, *lp2, sum; + int i, cl; + int kern_first_page; + int mem_size = m5Conf.mem_size; + + int mem_pages = mem_size / PAGE_SIZE, cons_pages; + ulong kernel_bytes, ksp, kernel_end, *unix_kernel_stack, bss, + ksp_bottom, ksp_top; + struct rpb_ctb *rpb_ctb; + struct ctb_tt *ctb_tt; + struct rpb_dsr *rpb_dsr; + struct rpb_crb *rpb_crb; + struct _m5_rpb_mdt *rpb_mdt; + int *rpb_lurt; + char *rpb_name; + ulong nextPtr; + + printf_lock("memsize %x pages %x \n", mem_size, mem_pages); + + /* Allocate: + * two pages for the HWRPB + * five page table pages: + * 1: First level page table + * 1: Second level page table + * 1: Third level page table for HWRPB + * 2: Third level page table for kernel (for up to 16MB) + * set up the page tables + * load the kernel at the physical address 0x230000 + * build the HWRPB + * set up memory descriptor table to give up the + * physical memory between the end of the page + * tables and the start of the kernel + * enable kseg addressing + * jump to the kernel + */ + + unix_boot_mem = ROUNDUP8K(&_end); + + printf_lock("First free page after ROM 0x%x\n", unix_boot_mem); + + rpb = (struct rpb *) unix_boot_alloc( HWRPB_PAGES); + + mdt_bitmap = (unsigned char *) unix_boot_alloc(MDT_BITMAP_PAGES); + first = (ulong *)unix_boot_alloc(1); + second = (ulong *)unix_boot_alloc(1); + third_rpb = (ulong *)unix_boot_alloc(1); + reservedFixup = (ulong*) unix_boot_alloc(1); + third_kernel = (ulong *)unix_boot_alloc(NUM_KERNEL_THIRD); + percpu_logout = (ulong*)unix_boot_alloc(1); + + cons_pages = KSEG_TO_PHYS(unix_boot_mem) / PAGE_SIZE; + + /* Set up the page tables */ + bzero((char *)first, PAGE_SIZE); + bzero((char *)second, PAGE_SIZE); + bzero((char *)reservedFixup, PAGE_SIZE); + bzero((char *)third_rpb, HWRPB_PAGES * PAGE_SIZE); + bzero((char *)third_kernel, PAGE_SIZE * NUM_KERNEL_THIRD); + + first[0] = KPTE(PFN(second)); + first[1] = KPTE(PFN(first)); /* Region 3 */ + + /* Region 0 */ + second[SECOND(0x10000000)] = KPTE(PFN(third_rpb)); + + for (i = 0; i < NUM_KERNEL_THIRD; i++) { + /* Region 1 */ + second[SECOND(0x20000000) + i] = KPTE(PFN(third_kernel) + i); + } + /* Region 2 */ + second[SECOND(0x40000000)] = KPTE(PFN(second)); + + + /* For some obscure reason, Dec Unix's database read + * from /etc/sysconfigtab is written to this fixed + * mapped memory location. Go figure, since it is + * not initialized by the console. Maybe it is + * to look at the database from the console + * after a boot/crash. + * + * Black magic to estimate the max size. SEGVs on overflow + * bugnion + */ #define DATABASE_BASE 0x20000000 -#ifdef not_not -#define DATABASE_END 0x20230000 /* don't need all that */ -#endif - #define DATABASE_END 0x20020000 - int i; - ul *dbPage = (ul*)unix_boot_alloc(1); - second[SECOND(DATABASE_BASE)] = KPTE(PFN(dbPage)); - for (i=DATABASE_BASE; i <DATABASE_END ; i+= 8096) { - ul *db = (ul*)unix_boot_alloc(1); - dbPage[THIRD(i)] = KPTE(PFN(db)); - } - } + ulong *dbPage = (ulong*)unix_boot_alloc(1); + second[SECOND(DATABASE_BASE)] = KPTE(PFN(dbPage)); + for (i = DATABASE_BASE; i < DATABASE_END ; i += 8096) { + ulong *db = (ulong*)unix_boot_alloc(1); + dbPage[THIRD(i)] = KPTE(PFN(db)); + } - /* Region 0 */ - /* Map the HWRPB */ - for (i = 0; i < HWRPB_PAGES; i++) third_rpb[i] = KPTE(PFN(rpb) + i); + /* Region 0 */ + /* Map the HWRPB */ + for (i = 0; i < HWRPB_PAGES; i++) + third_rpb[i] = KPTE(PFN(rpb) + i); - /* Map the MDT bitmap table */ - for (i=0;i<MDT_BITMAP_PAGES;i++) { - third_rpb[HWRPB_PAGES+i] = KPTE(PFN(mdt_bitmap)+i); - } + /* Map the MDT bitmap table */ + for (i = 0; i < MDT_BITMAP_PAGES; i++) { + third_rpb[HWRPB_PAGES + i] = KPTE(PFN(mdt_bitmap) + i); + } - /* Protect the PAL pages */ - for (i = 1; i < PFN(first); i++) third_rpb[HWRPB_PAGES + MDT_BITMAP_PAGES + i] = KPTE(i); + /* Protect the PAL pages */ + for (i = 1; i < PFN(first); i++) + third_rpb[HWRPB_PAGES + MDT_BITMAP_PAGES + i] = KPTE(i); /* Set up third_kernel after it's loaded, when we know where it is */ + kern_first_page = (KSEG_TO_PHYS(m5Conf.kernStart)/PAGE_SIZE); + kernel_end = ksp_top = ROUNDUP8K(m5Conf.kernEnd); + bootadr = m5Conf.entryPoint; + + printf_lock("HWRPB 0x%x l1pt 0x%x l2pt 0x%x l3pt_rpb 0x%x l3pt_kernel 0x%x" + " l2reserv 0x%x\n", + rpb, first, second, third_rpb, third_kernel, reservedFixup); + if (kernel_end - m5Conf.kernStart > (0x800000*NUM_KERNEL_THIRD)) { + printf_lock("Kernel is more than 8MB 0x%x - 0x%x = 0x%x\n", + kernel_end, m5Conf.kernStart, + kernel_end - m5Conf.kernStart ); + panic("kernel too big\n"); + } + + /* Map the kernel's pages into the third level of region 2 */ + for (ptr = m5Conf.kernStart; ptr < kernel_end; ptr += PAGE_SIZE) { + third_kernel[THIRD_XXX(ptr)] = KPTE(PFN(ptr)); + } + + /* blow 2 pages of phys mem for guards since it maintains 1-to-1 mapping */ + ksp = ksp_top + (3 * PAGE_SIZE); + if (ksp - m5Conf.kernStart > (0x800000*NUM_KERNEL_THIRD)) { + printf_lock("Kernel stack pushd us over 8MB\n"); + panic("ksp too big\n"); + } + if (THIRD_XXX((ulong)ksp_top) > NUM_KERNEL_THIRD * 1024) { + panic("increase NUM_KERNEL_THIRD, and change THIRD_XXX\n"); + } + ptr = (ulong) ksp_top; + bzero((char *)ptr, PAGE_SIZE * 2); + third_kernel[THIRD_XXX(ptr)] = 0; /* Stack Guard Page */ + ptr += PAGE_SIZE; + third_kernel[THIRD_XXX(ptr)] = KPTE(PFN(ptr)); /* Kernel Stack Pages */ + ptr += PAGE_SIZE; + third_kernel[THIRD_XXX(ptr)] = KPTE(PFN(ptr)); + ptr += PAGE_SIZE; + third_kernel[THIRD_XXX(ptr)] = 0; /* Stack Guard Page */ + + /* put argv into the bottom of the stack - argv starts at 1 because + * the command thatr got us here (i.e. "unixboot) is in argv[0]. + */ + ksp -= 8; /* Back up one longword */ + ksp -= argc * sizeof(char *); /* Make room for argv */ + kargv = (char **) ksp; + for (i = 1; i < argc; i++) { /* Copy arguments to stack */ + ksp -= ((strlen(argv[i]) + 1) + 7) & ~0x7; + kargv[i-1] = (char *) ksp; + strcpy(kargv[i - 1], argv[i]); + } + kargc = i - 1; + kargv[kargc] = NULL; /* just to be sure; doesn't seem to be used */ + ksp -= sizeof(char *); /* point above last arg for no real reason */ + + free_pfn = PFN(ptr); + + bcopy((char *)&m5_rpb, (char *)rpb, sizeof(struct rpb)); + + rpb->rpb_selfref = (struct rpb *) KSEG_TO_PHYS(rpb); + rpb->rpb_string = 0x0000004250525748; + + tbb = (ulong *) (((char *) rpb) + ROUNDUP8(sizeof(struct rpb))); + rpb->rpb_trans_off = (ulong)tbb - (ulong)rpb; + bcopy((char *)m5_tbb, (char *)tbb, sizeof(m5_tbb)); + + /* + * rpb_counter. Use to determine timeouts in OS. + * XXX must be patched after a checkpoint restore (I guess) + */ + + printf_lock("CPU Clock at %d MHz IntrClockFrequency=%d \n", + m5Conf.cpuClock, m5Conf.intrClockFrequency); + rpb->rpb_counter = m5Conf.cpuClock * 1000 * 1000; + + /* + * By definition, the rpb_clock is scaled by 4096 (in hz) + */ + rpb->rpb_clock = m5Conf.intrClockFrequency * 4096; + + /* + * Per CPU Slots. Multiprocessor support. + */ + int percpu_size = ROUNDUP128(sizeof(struct rpb_percpu)); + + printf_lock("Booting with %d processor(s) \n", m5Conf.numCPUs); + + rpb->rpb_numprocs = m5Conf.numCPUs; + rpb->rpb_slotsize = percpu_size; + rpb_percpu = (struct rpb_percpu *) + ROUNDUP128(((ulong)tbb) + (sizeof(m5_tbb))); + + rpb->rpb_percpu_off = (ulong)rpb_percpu - (ulong)rpb; + + for (i = 0; i < m5Conf.numCPUs; i++) { + struct rpb_percpu *thisCPU = (struct rpb_percpu*) + ((ulong)rpb_percpu + percpu_size * i); + + bzero((char *)thisCPU, percpu_size); + bcopy((char *)&m5_rpb_percpu, (char *)thisCPU, + sizeof(struct rpb_percpu)); + + thisCPU->rpb_pcb.rpb_ksp = ksp; + thisCPU->rpb_pcb.rpb_ptbr = PFN(first); + + thisCPU->rpb_logout = KSEG_TO_PHYS(percpu_logout); + thisCPU->rpb_logout_len = PAGE_SIZE; + + printf_lock("KSP: 0x%x PTBR 0x%x\n", + thisCPU->rpb_pcb.rpb_ksp, thisCPU->rpb_pcb.rpb_ptbr); + + if (i) { + bootStrapImpure[i] = (ulong)unix_boot_alloc(1); + } + } + + nextPtr = (ulong)rpb_percpu + percpu_size * m5Conf.numCPUs; + + /* + * Console Terminal Block + */ + rpb_ctb = (struct rpb_ctb *) nextPtr; + ctb_tt = (struct ctb_tt*) rpb_ctb; + + rpb->rpb_ctb_off = ((ulong)rpb_ctb) - (ulong)rpb; + rpb->rpb_ctb_size = sizeof(struct rpb_ctb); + + bzero((char *)rpb_ctb, sizeof(struct ctb_tt)); + + rpb_ctb->rpb_type = CONS_DZ; + rpb_ctb->rpb_length = sizeof(ctb_tt) - sizeof(rpb_ctb); + + /* + * uart initizliation + */ + ctb_tt->ctb_csr = 0; + ctb_tt->ctb_tivec = 0x6c0; /* matches tlaser pal code */ + ctb_tt->ctb_rivec = 0x680; /* matches tlaser pal code */ + ctb_tt->ctb_baud = 9600; + ctb_tt->ctb_put_sts = 0; + ctb_tt->ctb_get_sts = 0; + + rpb_crb = (struct rpb_crb *) (((ulong)rpb_ctb) + sizeof(struct ctb_tt)); + rpb->rpb_crb_off = ((ulong)rpb_crb) - (ulong)rpb; + + bzero((char *)rpb_crb, sizeof(struct rpb_crb)); + + /* + * console callback stuff (m5) + */ + rpb_crb->rpb_num = 1; + rpb_crb->rpb_mapped_pages = HWRPB_PAGES; + rpb_crb->rpb_map[0].rpb_virt = 0x10000000; + rpb_crb->rpb_map[0].rpb_phys = KSEG_TO_PHYS(((ulong)rpb) & ~0x1fff); + rpb_crb->rpb_map[0].rpb_pgcount = HWRPB_PAGES; -#ifdef original__xxm - if (unixLoadKernel(AOUT_LOAD_ADDR, argv[1]) == -1) return; - aoutfixup(AOUT_LOAD_ADDR); -#else - /* aoutfixup(simosConf.kernelFileHdr); */ -#endif -#if 0 - bss = aout_bss_addr; - - kern_first_page = (KSEG_TO_PHYS(aout_text_start) / 8192); - kernel_end = ksp_top = ROUNDUP8K(aout_bss_addr + aout_bss_size); - bootadr = aout_entry; -#endif - - kern_first_page = (KSEG_TO_PHYS(simosConf.kernStart)/8192); - kernel_end = ksp_top = ROUNDUP8K(simosConf.kernEnd); - bootadr = simosConf.entryPoint; - - - printf_lock("HWRPB 0x%x l1pt 0x%x l2pt 0x%x l3pt_rpb 0x%x l3pt_kernel 0x%x l2reserv 0x%x\n", - rpb, first, second, third_rpb, third_kernel,reservedFixup); - if (kernel_end - simosConf.kernStart > (0x800000*NUM_KERNEL_THIRD)) { - printf_lock("Kernel is more than 8MB 0x%x - 0x%x = 0x%x\n", - kernel_end, simosConf.kernStart, - kernel_end -simosConf.kernStart ); - panic("kernel too big\n"); - - } - /* Map the kernel's pages into the third level of region 2 */ - - for (ptr = simosConf.kernStart; ptr < kernel_end; ptr += 8192) { - - third_kernel[THIRD_XXX(ptr)] = KPTE(PFN(ptr)); - } - /* blow 2 pages of phys mem for guards since it maintains 1-to-1 mapping */ - ksp = ksp_top + (3 * 8192); - if (ksp - simosConf.kernStart > (0x800000*NUM_KERNEL_THIRD)) { - printf_lock("Kernel stack pushd us over 8MB\n"); - panic("ksp too big\n"); - } - if (THIRD_XXX((ul)ksp_top) > NUM_KERNEL_THIRD * 1024) { - panic("increase NUM_KERNEL_THIRD, and change THIRD_XXX\n"); - } - ptr = (ul) ksp_top; - bzero((char *)ptr, 8192 * 2); - third_kernel[THIRD_XXX(ptr)] = 0; /* Stack Guard Page */ - ptr += 8192; - third_kernel[THIRD_XXX(ptr)] = KPTE(PFN(ptr)); /* Kernel Stack Pages */ - ptr += 8192; - third_kernel[THIRD_XXX(ptr)] = KPTE(PFN(ptr)); - ptr += 8192; - third_kernel[THIRD_XXX(ptr)] = 0; /* Stack Guard Page */ + printf_lock("Console Callback at 0x%x, fixup at 0x%x, crb offset: 0x%x\n", + rpb_crb->rpb_va_disp, rpb_crb->rpb_va_fixup, rpb->rpb_crb_off); - /* put argv into the bottom of the stack - argv starts at 1 because - * the command thatr got us here (i.e. "unixboot) is in argv[0]. - */ - ksp -= 8; /* Back up one longword */ - ksp -= argc * sizeof(char *); /* Make room for argv */ - kargv = (char **) ksp; - for (i = 1; i < argc; i++) { /* Copy arguments to stack */ - ksp -= ((strlen(argv[i]) + 1) + 7) & ~0x7; - kargv[i-1] = (char *) ksp; - strcpy(kargv[i-1], argv[i]); - } - kargc = i - 1; - kargv[kargc] = NULL; /* just to be sure; doesn't seem to be used */ - ksp -= sizeof(char *); /* point above last arg for no real reason */ + rpb_mdt = (struct _m5_rpb_mdt *)((ulong)rpb_crb + sizeof(struct rpb_crb)); + rpb->rpb_mdt_off = (ulong)rpb_mdt - (ulong)rpb; + bcopy((char *)&m5_rpb_mdt, (char *)rpb_mdt, sizeof(struct _m5_rpb_mdt)); + + + cl = 0; + rpb_mdt->rpb_cluster[cl].rpb_pfncount = kern_first_page; + cl++; + + rpb_mdt->rpb_cluster[cl].rpb_pfn = kern_first_page; + rpb_mdt->rpb_cluster[cl].rpb_pfncount = mem_pages - kern_first_page; + rpb_mdt->rpb_cluster[cl].rpb_pfntested = + rpb_mdt->rpb_cluster[cl].rpb_pfncount; + rpb_mdt->rpb_cluster[cl].rpb_pa = KSEG_TO_PHYS(mdt_bitmap); + rpb_mdt->rpb_cluster[cl].rpb_va = 0x10000000 + HWRPB_PAGES * PAGE_SIZE; + cl++; + + rpb_mdt->rpb_numcl = cl; + + for (i = 0; i < cl; i++) + printf_lock("Memory cluster %d [%d - %d]\n", i, + rpb_mdt->rpb_cluster[i].rpb_pfn, + rpb_mdt->rpb_cluster[i].rpb_pfncount); - free_pfn = PFN(ptr); - - bcopy((char *)&xxm_rpb, (char *)rpb, sizeof(struct rpb)); - - rpb->rpb_selfref = (struct rpb *) KSEG_TO_PHYS(rpb); - rpb->rpb_string = 0x0000004250525748; - - tbb = (ul *) (((char *) rpb) + ROUNDUP8(sizeof(struct rpb))); - rpb->rpb_trans_off = (ul)tbb - (ul)rpb; - bcopy((char *)xxm_tbb, (char *)tbb, sizeof(xxm_tbb)); - - - /* - * rpb_counter. Use to determine timeouts in OS. - * XXX must be patched after a checkpoint restore (I guess) - */ - - printf_lock("CPU Clock at %d MHz IntrClockFrequency=%d \n", simosConf.cpuClock,simosConf.intrClockFrequency); - rpb->rpb_counter = simosConf.cpuClock * 1000 * 1000; - - /* - * By definition, the rpb_clock is scaled by 4096 (in hz) - */ - rpb->rpb_clock = simosConf.intrClockFrequency * 4096; - - - - /* - * Per CPU Slots. Multiprocessor support. - */ - { - int i; - int size = ROUNDUP128(sizeof(struct rpb_percpu)); - - printf_lock("Booting with %d processor(s) \n",simosConf.numCPUs); - - rpb->rpb_numprocs = simosConf.numCPUs; - rpb->rpb_slotsize = size; - rpb_percpu = (struct rpb_percpu *) - ROUNDUP128(((ul) tbb) +(sizeof(xxm_tbb))); - - rpb->rpb_percpu_off = (ul)rpb_percpu - (ul)rpb; - - for (i=0;i<simosConf.numCPUs;i++) { - struct rpb_percpu *thisCPU = (struct rpb_percpu*) - ((ul)rpb_percpu + size*i); - - bzero((char *)thisCPU, size); - bcopy((char *)&xxm_rpb_percpu, - (char *)thisCPU, - sizeof(struct rpb_percpu)); - - thisCPU->rpb_pcb.rpb_ksp = ksp; - thisCPU->rpb_pcb.rpb_ptbr = PFN(first); - - thisCPU->rpb_logout = KSEG_TO_PHYS(percpu_logout); - thisCPU->rpb_logout_len = 8192; - -/* thisCPU->rpb_pcb.rpb_ptbr = PFN(second);*/ - - printf_lock("KSP: 0x%x PTBR 0x%x\n", thisCPU->rpb_pcb.rpb_ksp, thisCPU->rpb_pcb.rpb_ptbr); - - if (i) { - bootStrapImpure[i] = (ul)unix_boot_alloc(1); - } - - } - - nextPtr = (ul)rpb_percpu + size*simosConf.numCPUs; - } - - /* - * Console Terminal Block - */ - - - rpb_ctb = (struct rpb_ctb *) nextPtr; - ctb_tt = (struct ctb_tt*) rpb_ctb; - - rpb->rpb_ctb_off = ((ul)rpb_ctb) - (ul)rpb; - rpb->rpb_ctb_size = sizeof(struct rpb_ctb); - - bzero((char *)rpb_ctb, sizeof(struct ctb_tt)); - -#ifdef original_xxm - if (tga_slot == -1) - rpb_ctb->rpb_type = CONS_DZ; - else { - rpb_ctb->rpb_type = CONS_GRPH; - rpb_ctb->rpb_unit = (SLOTINFO_PCI << 16) | (0 << 8) | tga_slot; - } -#else - rpb_ctb->rpb_type = CONS_DZ; -#endif - - rpb_ctb->rpb_length = sizeof(ctb_tt)-sizeof(rpb_ctb); - - /* - * uart initizliation - */ - ctb_tt->ctb_csr = 0; - ctb_tt->ctb_tivec = 0x6c0; /* matches tlaser pal code */ - ctb_tt->ctb_rivec = 0x680; /* matches tlaser pal code */ - ctb_tt->ctb_baud = 9600; - ctb_tt->ctb_put_sts = 0; - ctb_tt->ctb_get_sts = 0; - - - rpb_crb = (struct rpb_crb *) (((ul)rpb_ctb) + sizeof(struct ctb_tt)); - rpb->rpb_crb_off = ((ul)rpb_crb) - (ul)rpb; - - bzero((char *)rpb_crb, sizeof(struct rpb_crb)); - /* - * console callback stuff (simos) - */ - - rpb_crb->rpb_num = 1; - rpb_crb->rpb_mapped_pages = HWRPB_PAGES; - rpb_crb->rpb_map[0].rpb_virt = 0x10000000; - rpb_crb->rpb_map[0].rpb_phys = KSEG_TO_PHYS(((ul)rpb) & ~0x1fff); - rpb_crb->rpb_map[0].rpb_pgcount = HWRPB_PAGES; - - - printf_lock("Console Callback at 0x%x, fixup at 0x%x, crb offset: 0x%x\n", - rpb_crb->rpb_va_disp, - rpb_crb->rpb_va_fixup, - rpb->rpb_crb_off); - - rpb_mdt = (struct _xxm_rpb_mdt *) (((ul)rpb_crb) + sizeof(struct rpb_crb)); - rpb->rpb_mdt_off = (ul)rpb_mdt - (ul)rpb; - bcopy((char *)&xxm_rpb_mdt, (char *)rpb_mdt, sizeof(struct _xxm_rpb_mdt)); - - - cl = 0; -#ifdef undef - /* Until Digital Unix can handle it, account all pages below the kernel - * as "console" memory. */ - rpb_mdt->rpb_cluster[cl].rpb_pfncount = cons_pages; -#endif - rpb_mdt->rpb_cluster[cl].rpb_pfncount = kern_first_page; - cl++; - - rpb_mdt->rpb_cluster[cl].rpb_pfn = kern_first_page; - rpb_mdt->rpb_cluster[cl].rpb_pfncount = mem_pages - kern_first_page; - rpb_mdt->rpb_cluster[cl].rpb_pfntested=rpb_mdt->rpb_cluster[cl].rpb_pfncount; - rpb_mdt->rpb_cluster[cl].rpb_pa = KSEG_TO_PHYS(mdt_bitmap); - rpb_mdt->rpb_cluster[cl].rpb_va = 0x10000000 + HWRPB_PAGES * 8192; - cl++; - -#ifdef undef - /* The stupid Unix kernel needs to have all mdt clusters in ascending - * order, and the last cluster is used to compute the top of memory. - * It can't make use of memory between the console and the kernel. - */ - rpb_mdt->rpb_cluster[cl].rpb_pfn = cons_pages; - rpb_mdt->rpb_cluster[cl].rpb_pfncount = kern_first_page - cons_pages; - rpb_mdt->rpb_cluster[cl].rpb_pfntested=rpb_mdt->rpb_cluster[cl].rpb_pfncount; - rpb_mdt->rpb_cluster[cl].rpb_pa = KSEG_TO_PHYS(mdt_bitmap); - rpb_mdt->rpb_cluster[cl].rpb_va = 0x10000000 + HWRPB_PAGES * 8192; - cl++; -#endif - - rpb_mdt->rpb_numcl = cl; - - for (i = 0; i < cl; i++) - printf_lock("Memory cluster %d [%d - %d]\n", i, rpb_mdt->rpb_cluster[i].rpb_pfn, rpb_mdt->rpb_cluster[i].rpb_pfncount); - - - - /* Checksum the rpb for good luck */ - sum = 0; - lp1 = (long *)&rpb_mdt->rpb_impaddr; - lp2 = (long *)&rpb_mdt->rpb_cluster[cl]; - while (lp1 < lp2) sum += *lp1++; - rpb_mdt->rpb_checksum = sum; - - /* XXX should checksum the cluster descriptors */ - - bzero((char *)mdt_bitmap, MDT_BITMAP_PAGES * 8192); - for (i = 0; i < mem_pages/8; i++) ((unsigned char *)mdt_bitmap)[i] = 0xff; - - printf_lock("Initalizing mdt_bitmap addr 0x%x mem_pages %x \n", - (long)mdt_bitmap,(long)mem_pages); - - xxm_rpb.rpb_config_off = 0; - xxm_rpb.rpb_fru_off = 0; - - rpb_dsr = (struct rpb_dsr *) (((ul)rpb_mdt) + sizeof(struct _xxm_rpb_mdt)); - rpb->rpb_dsr_off = ((ul)rpb_dsr) - (ul)rpb; - bzero((char *)rpb_dsr, sizeof(struct rpb_dsr)); - rpb_dsr->rpb_smm = 1578; /* Official XXM SMM number as per SRM */ - rpb_dsr->rpb_smm = 1089; /* Official Alcor SMM number as per SRM */ - - rpb_lurt = (int *) ROUNDUP8(((ul)rpb_dsr) + sizeof(struct rpb_dsr)); - rpb_dsr->rpb_lurt_off = ((ul) rpb_lurt) - (ul) rpb_dsr; - bcopy((char *)xxm_lurt, (char *)rpb_lurt, sizeof(xxm_lurt)); - - rpb_name = (char *) ROUNDUP8(((ul)rpb_lurt) + sizeof(xxm_lurt)); - rpb_dsr->rpb_sysname_off = ((ul) rpb_name) - (ul) rpb_dsr; + /* Checksum the rpb for good luck */ + sum = 0; + lp1 = (long *)&rpb_mdt->rpb_impaddr; + lp2 = (long *)&rpb_mdt->rpb_cluster[cl]; + while (lp1 < lp2) sum += *lp1++; + rpb_mdt->rpb_checksum = sum; + + /* XXX should checksum the cluster descriptors */ + bzero((char *)mdt_bitmap, MDT_BITMAP_PAGES * PAGE_SIZE); + for (i = 0; i < mem_pages/8; i++) + ((unsigned char *)mdt_bitmap)[i] = 0xff; + + printf_lock("Initalizing mdt_bitmap addr 0x%x mem_pages %x \n", + (long)mdt_bitmap,(long)mem_pages); + + m5_rpb.rpb_config_off = 0; + m5_rpb.rpb_fru_off = 0; + + rpb_dsr = (struct rpb_dsr *)((ulong)rpb_mdt + sizeof(struct _m5_rpb_mdt)); + rpb->rpb_dsr_off = (ulong)rpb_dsr - (ulong)rpb; + bzero((char *)rpb_dsr, sizeof(struct rpb_dsr)); + rpb_dsr->rpb_smm = 1578; /* Official XXM SMM number as per SRM */ + rpb_dsr->rpb_smm = 1089; /* Official Alcor SMM number as per SRM */ + + rpb_lurt = (int *) ROUNDUP8((ulong)rpb_dsr + sizeof(struct rpb_dsr)); + rpb_dsr->rpb_lurt_off = ((ulong) rpb_lurt) - (ulong) rpb_dsr; + bcopy((char *)m5_lurt, (char *)rpb_lurt, sizeof(m5_lurt)); + + rpb_name = (char *) ROUNDUP8(((ulong)rpb_lurt) + sizeof(m5_lurt)); + rpb_dsr->rpb_sysname_off = ((ulong) rpb_name) - (ulong) rpb_dsr; #define THENAME " M5/Alpha " - sum = sizeof(THENAME); - bcopy(THENAME, rpb_name, sum); - *(ul *)rpb_name = sizeof(THENAME); /* put in length field */ - - /* calculate size of rpb */ - rpb->rpb_size = ((ul) &rpb_name[sum]) - (ul)rpb; - - if (rpb->rpb_size > 8192*HWRPB_PAGES) { - panic("HWRPB_PAGES=%d too small for HWRPB !!! \n"); - } - - - { - ul *ptr = (ul*)((char*)rpb_dsr + sizeof(struct rpb_dsr )); - rpb_crb->rpb_pa_disp = KSEG_TO_PHYS(ptr); - rpb_crb->rpb_va_disp = 0x10000000 + (((ul)ptr - (ul)rpb) & (0x2000*HWRPB_PAGES-1)); - printf_lock("ConsoleDispatch at virt %x phys %x val %x\n", - rpb_crb->rpb_va_disp, - rpb_crb->rpb_pa_disp, - consoleCallback); - *ptr++ = 0; - *ptr++ = (ul) consoleCallback; - rpb_crb->rpb_pa_fixup = KSEG_TO_PHYS(ptr); - rpb_crb->rpb_va_fixup = 0x10000000 + (((ul)ptr - (ul)rpb) & (0x2000*HWRPB_PAGES-1)); - *ptr++ = 0; - - *ptr++ = (ul) consoleFixup; - } - - - /* Checksum the rpb for good luck */ - sum = 0; - lp1 = (long *)rpb; - lp2 = &rpb->rpb_checksum; - while (lp1 < lp2) - sum += *lp1++; - *lp2 = sum; - + sum = sizeof(THENAME); + bcopy(THENAME, rpb_name, sum); + *(ulong *)rpb_name = sizeof(THENAME); /* put in length field */ + + /* calculate size of rpb */ + rpb->rpb_size = ((ulong) &rpb_name[sum]) - (ulong)rpb; + + if (rpb->rpb_size > PAGE_SIZE * HWRPB_PAGES) { + panic("HWRPB_PAGES=%d too small for HWRPB !!! \n"); + } + + ulong *rpbptr = (ulong*)((char*)rpb_dsr + sizeof(struct rpb_dsr)); + rpb_crb->rpb_pa_disp = KSEG_TO_PHYS(rpbptr); + rpb_crb->rpb_va_disp = 0x10000000 + + (((ulong)rpbptr - (ulong)rpb) & (0x2000 * HWRPB_PAGES - 1)); + printf_lock("ConsoleDispatch at virt %x phys %x val %x\n", + rpb_crb->rpb_va_disp, rpb_crb->rpb_pa_disp, consoleCallback); + *rpbptr++ = 0; + *rpbptr++ = (ulong) consoleCallback; + rpb_crb->rpb_pa_fixup = KSEG_TO_PHYS(rpbptr); + rpb_crb->rpb_va_fixup = 0x10000000 + + (((ulong)rpbptr - (ulong)rpb) & (0x2000 * HWRPB_PAGES - 1)); + *rpbptr++ = 0; + + *rpbptr++ = (ulong) consoleFixup; + + /* Checksum the rpb for good luck */ + sum = 0; + lp1 = (long *)rpb; + lp2 = &rpb->rpb_checksum; + while (lp1 < lp2) + sum += *lp1++; + *lp2 = sum; /* * MP bootstrap */ - - { - int i; - for (i=1;i<simosConf.numCPUs;i++) { - volatile struct AlphaAccess *k1Conf = (volatile struct AlphaAccess *) - (ALPHA_ACCESS_BASE); - printf_lock("Bootstraping CPU %d with sp=0x%x \n", - i,bootStrapImpure[i]); + for (i = 1; i < m5Conf.numCPUs; i++) { + volatile struct AlphaAccess *k1Conf; + k1Conf = (volatile struct AlphaAccess *)(ALPHA_ACCESS_BASE); + printf_lock("Bootstraping CPU %d with sp=0x%x\n", + i, bootStrapImpure[i]); k1Conf->bootStrapImpure = bootStrapImpure[i]; k1Conf->bootStrapCPU = i; - } - } - - /* - * Make sure that we are not stepping on the kernel - */ - if ((ul)unix_boot_mem >= (ul)simosConf.kernStart) { - panic("CONSOLE: too much memory. Smashing kernel \n"); - } else { - printf_lock("unix_boot_mem ends at %x \n",unix_boot_mem); - } - - -#ifdef undef -#define CSERVE_K_JTOKERN 0x18 - cServe(bootadr, (ul) rpb_percpu, CSERVE_K_JTOKERN, free_pfn); -#endif - - if (go) JToKern(bootadr, rpb_percpu, free_pfn, kargc, kargv, NULL); -} - - -#if 0 -aoutfixup(char *p) -{ - int i; - unsigned long rem, len, off, dst; - - - struct new_aouthdr *ao = (struct new_aouthdr *) &p[NEW_FILHSZ]; -#if 0 - struct scnhdr *s = (struct scnhdr *) &p[FILHSZ + AOUTHSZ]; - struct scnhdr *t, *d, *b; - printf("aoutfixup: %d sections \n",fh->f_nscns); -#endif - - - aout_text_start = ((ul)ao->text_start_hi<<32) + ao->text_start; - aout_data_addr = ((ul)ao->data_start_hi<<32) + ao->data_start; - aout_bss_addr = ((ul)ao->bss_start_hi<<32) + ao->bss_start; - aout_bss_size = ((ul)ao->bsize_hi<<32) + ao->bsize; - aout_entry = ((ul)ao->entry_hi<<32) + ao->entry; - - printf("_text 0x%16x %8d @ %08d\n", aout_text_start, ao->tsize,0 /* t->s_scnptr*/); - printf("_data 0x%16x %8d @ %08d\n", aout_data_addr, ao->dsize,0/* d->s_scnptr*/); - printf("_bss 0x%16x %8d\n", aout_bss_addr, ao->bsize); - printf("entry 0x%16x\n", aout_entry); -#if 0 - for (i = 0; i < fh->f_nscns; i++) { - printf("section %d %s \n",i,s[i].s_name); - if (!strcmp(s[i].s_name, ".text")) t = &s[i]; - else if (!strcmp(s[i].s_name, ".data")) d = &s[i]; - else if (!strcmp(s[i].s_name, ".bss")) b = &s[i]; - } - bcopy(&p[t->s_scnptr], (char *)ao->text_start, ao->tsize); - bcopy(&p[d->s_scnptr], (char *)ao->data_start, ao->dsize); -#endif + } + + /* + * Make sure that we are not stepping on the kernel + */ + if ((ulong)unix_boot_mem >= (ulong)m5Conf.kernStart) { + panic("CONSOLE: too much memory. Smashing kernel\n"); + } else { + printf_lock("unix_boot_mem ends at %x \n", unix_boot_mem); + } + + if (go) + JToKern((char *)bootadr, (ulong)rpb_percpu, free_pfn, kargc, kargv, + NULL); } -#endif -extern ui palJToKern[]; -JToKern(bootadr, rpb_percpu, free_pfn, k_argc, k_argv, envp) -char * bootadr; -ul rpb_percpu; -ul free_pfn; -ul k_argc; -char **k_argv; -char **envp; +void +JToKern(char *bootadr, ulong rpb_percpu, ulong free_pfn, ulong k_argc, + char **k_argv, char **envp) { - struct _kernel_params *kernel_params = (struct _kernel_params *) KSEG; - int i; - - printf_lock("k_argc = %d ", k_argc); - for (i = 0; i < k_argc; i++) { - printf_lock("'%s' ", k_argv[i]); - } - printf_lock("\n"); - -/* rpb_percpu |= 0xfffffc0000000000;*/ - kernel_params->bootadr = bootadr; - kernel_params->rpb_percpu = KSEG_TO_PHYS(rpb_percpu); - kernel_params->free_pfn = free_pfn; - kernel_params->argc = k_argc; - kernel_params->argv = (ul)k_argv; - kernel_params->envp = (ul)envp; - printf_lock("jumping to kernel at 0x%x, (PCBB 0x%x pfn %d)\n", bootadr, rpb_percpu, free_pfn); - jToPal(KSEG_TO_PHYS((ul)palJToKern)); - printf_lock("returned from jToPal. Looping\n"); - while(1) continue; + extern ulong palJToKern[]; + + struct _kernel_params *kernel_params = (struct _kernel_params *) KSEG; + int i; + + printf_lock("k_argc = %d ", k_argc); + for (i = 0; i < k_argc; i++) { + printf_lock("'%s' ", k_argv[i]); + } + printf_lock("\n"); + + kernel_params->bootadr = bootadr; + kernel_params->rpb_percpu = KSEG_TO_PHYS(rpb_percpu); + kernel_params->free_pfn = free_pfn; + kernel_params->argc = k_argc; + kernel_params->argv = (ulong)k_argv; + kernel_params->envp = (ulong)envp; + printf_lock("jumping to kernel at 0x%x, (PCBB 0x%x pfn %d)\n", + bootadr, rpb_percpu, free_pfn); + JToPal(KSEG_TO_PHYS(palJToKern)); + printf_lock("returned from JToPal. Looping\n"); + while (1) + continue; } - -void jToPal(ul bootadr) +void +JToPal(ulong bootadr) { - cServe(bootadr, 0, CSERVE_K_JTOPAL); + cServe(bootadr, 0, CSERVE_K_JTOPAL); -/* - * Make sure that floating point is enabled incase - * it was disabled by the user program. - */ - wrfen(1); + /* + * Make sure that floating point is enabled incase + * it was disabled by the user program. + */ + wrfen(1); } - -int strcpy(char *dst, char *src) +int +strcpy(char *dst, char *src) { - int i=0; - while(*src) { - *dst++ = *src++; - i++; - } - return i; + int i = 0; + while (*src) { + *dst++ = *src++; + i++; + } + return i; } - - - -/* ***************************************** +/* * Console I/O - * ******************************************/ + * + */ int numOpenDevices = 11; struct { - char name[128]; + char name[128]; } deviceState[32]; #define BOOTDEVICE_NAME "SCSI 1 0 0 1 100 0" @@ -1030,35 +866,27 @@ struct { void DeviceOperation(long op, long channel, long count, long address, long block) { - struct AlphaAccess *k1Conf = (struct AlphaAccess *) - (ALPHA_ACCESS_BASE); - - long pAddr; - -#if 0 - printf("Console::DeviceRead count=0x%x address=0x%x block=0x%x\n", - count,address,block); -#endif - - if (strcmp(deviceState[channel].name, BOOTDEVICE_NAME )) { - panic("DeviceRead: only implemented for root disk \n"); - } - pAddr = KSEG_TO_PHYS(address); - if (pAddr + count > simosConf.mem_size) { - panic("DeviceRead: request out of range \n"); - } - - k1Conf->diskCount = count; - k1Conf->diskPAddr = pAddr; - k1Conf->diskBlock = block; - k1Conf->diskOperation = op; /* launch */ + struct AlphaAccess *k1Conf = (struct AlphaAccess *)(ALPHA_ACCESS_BASE); + long pAddr; + + if (strcmp(deviceState[channel].name, BOOTDEVICE_NAME )) { + panic("DeviceRead: only implemented for root disk \n"); + } + pAddr = KSEG_TO_PHYS(address); + if (pAddr + count > m5Conf.mem_size) { + panic("DeviceRead: request out of range \n"); + } + + k1Conf->diskCount = count; + k1Conf->diskPAddr = pAddr; + k1Conf->diskBlock = block; + k1Conf->diskOperation = op; /* launch */ } - - -/* ************************************************************************* - * SimoS Console callbacks - * **************************************************/ +/* + * M5 Console callbacks + * + */ /* AXP manual 2-31 */ #define CONSCB_GETC 0x1 @@ -1109,39 +937,38 @@ DeviceOperation(long op, long channel, long count, long address, long block) #define MAX_ENVLEN 32 -char env_auto_action[MAX_ENVLEN] = "BOOT"; -char env_boot_dev[MAX_ENVLEN] = ""; -char env_bootdef_dev[MAX_ENVLEN] = ""; -char env_booted_dev[MAX_ENVLEN] = BOOTDEVICE_NAME; -char env_boot_file[MAX_ENVLEN] = ""; -char env_booted_file[MAX_ENVLEN] = ""; -char env_boot_osflags[MAX_ENVLEN] = ""; -char env_booted_osflags[MAX_ENVLEN] = ""; -char env_boot_reset[MAX_ENVLEN] = ""; -char env_dump_dev[MAX_ENVLEN] = ""; -char env_enable_audit[MAX_ENVLEN] = ""; -char env_license[MAX_ENVLEN] = ""; -char env_char_set[MAX_ENVLEN] = ""; -char env_language[MAX_ENVLEN] = ""; -char env_tty_dev[MAX_ENVLEN] = "0"; -char env_scsiid[MAX_ENVLEN] = ""; -char env_scsifast[MAX_ENVLEN] = ""; -char env_com1_baud[MAX_ENVLEN] = ""; -char env_com1_modem[MAX_ENVLEN] = ""; -char env_com1_flow[MAX_ENVLEN] = ""; -char env_com1_misc[MAX_ENVLEN] = ""; -char env_com2_baud[MAX_ENVLEN] = ""; -char env_com2_modem[MAX_ENVLEN] = ""; -char env_com2_flow[MAX_ENVLEN] = ""; -char env_com2_misc[MAX_ENVLEN] = ""; -char env_password[MAX_ENVLEN] = ""; -char env_secure[MAX_ENVLEN] = ""; -char env_logfail[MAX_ENVLEN] = ""; -char env_srm2dev_id[MAX_ENVLEN] = ""; +char env_auto_action[MAX_ENVLEN] = "BOOT"; +char env_boot_dev[MAX_ENVLEN] = ""; +char env_bootdef_dev[MAX_ENVLEN] = ""; +char env_booted_dev[MAX_ENVLEN] = BOOTDEVICE_NAME; +char env_boot_file[MAX_ENVLEN] = ""; +char env_booted_file[MAX_ENVLEN] = ""; +char env_boot_osflags[MAX_ENVLEN] = ""; +char env_booted_osflags[MAX_ENVLEN] = ""; +char env_boot_reset[MAX_ENVLEN] = ""; +char env_dump_dev[MAX_ENVLEN] = ""; +char env_enable_audit[MAX_ENVLEN] = ""; +char env_license[MAX_ENVLEN] = ""; +char env_char_set[MAX_ENVLEN] = ""; +char env_language[MAX_ENVLEN] = ""; +char env_tty_dev[MAX_ENVLEN] = "0"; +char env_scsiid[MAX_ENVLEN] = ""; +char env_scsifast[MAX_ENVLEN] = ""; +char env_com1_baud[MAX_ENVLEN] = ""; +char env_com1_modem[MAX_ENVLEN] = ""; +char env_com1_flow[MAX_ENVLEN] = ""; +char env_com1_misc[MAX_ENVLEN] = ""; +char env_com2_baud[MAX_ENVLEN] = ""; +char env_com2_modem[MAX_ENVLEN] = ""; +char env_com2_flow[MAX_ENVLEN] = ""; +char env_com2_misc[MAX_ENVLEN] = ""; +char env_password[MAX_ENVLEN] = ""; +char env_secure[MAX_ENVLEN] = ""; +char env_logfail[MAX_ENVLEN] = ""; +char env_srm2dev_id[MAX_ENVLEN] = ""; #define MAX_ENV_INDEX 100 -char *env_ptr[MAX_ENV_INDEX] = -{ +char *envptr[MAX_ENV_INDEX] = { 0, /* 0x00 */ env_auto_action, /* 0x01 */ env_boot_dev, /* 0x02 */ @@ -1187,140 +1014,128 @@ char *env_ptr[MAX_ENV_INDEX] = long CallBackDispatcher(long a0, long a1, long a2, long a3, long a4) { - long i; - switch (a0) { - case CONSCB_GETC: - return GetChar(); - - case CONSCB_PUTS: - for(i = 0; i < a3; i++) - PutChar(*((char *)a2+i)); - return a3; - - case CONSCB_GETENV: - if (a1 >= 0 && a1 < MAX_ENV_INDEX && env_ptr[a1] != 0 && *env_ptr[a1]) { - i = strcpy((char*)a2, env_ptr[a1]); - } else { - strcpy((char*)a2, ""); - i = (long)0xc000000000000000; - if (a1 >= 0 && a1 < MAX_ENV_INDEX) - printf_lock("GETENV unsupported option %d (0x%x)\n", a1, a1); - else - printf_lock("GETENV unsupported option %s\n", a1); - } - - if (i > a3) - panic("CONSCB_GETENV overwrote buffer\n"); - return i; - - case CONSCB_OPEN: - bcopy((char*)a1,deviceState[numOpenDevices].name,a2); - deviceState[numOpenDevices].name[a2] = '\0'; - printf_lock("CONSOLE OPEN : %s --> success \n", - deviceState[numOpenDevices].name); - return numOpenDevices++; - - case CONSCB_READ: - DeviceOperation(a0,a1,a2,a3,a4); - break; - - case CONSCB_CLOSE: - break; - case CONSCB_OPEN_CONSOLE: - printf_lock("CONSOLE OPEN\n"); - return 0; /* success */ - break; /* not rearched */ - case CONSCB_CLOSE_CONSOLE: - printf_lock("CONSOLE CLOSE\n"); - return 0; /* success */ - break; /* not reached */ - - default: - panic("cher (%x,%x,%x,%x)\n", a0, a1, a2, a3); - } - - return 0; + long i; + switch (a0) { + case CONSCB_GETC: + return GetChar(); + + case CONSCB_PUTS: + for (i = 0; i < a3; i++) + PutChar(*((char *)a2 + i)); + return a3; + + case CONSCB_GETENV: + if (a1 >= 0 && a1 < MAX_ENV_INDEX && envptr[a1] != 0 && *envptr[a1]) { + i = strcpy((char*)a2, envptr[a1]); + } else { + strcpy((char*)a2, ""); + i = (long)0xc000000000000000; + if (a1 >= 0 && a1 < MAX_ENV_INDEX) + printf_lock("GETENV unsupported option %d (0x%x)\n", a1, a1); + else + printf_lock("GETENV unsupported option %s\n", a1); + } + + if (i > a3) + panic("CONSCB_GETENV overwrote buffer\n"); + return i; + + case CONSCB_OPEN: + bcopy((char*)a1, deviceState[numOpenDevices].name, a2); + deviceState[numOpenDevices].name[a2] = '\0'; + printf_lock("CONSOLE OPEN : %s --> success \n", + deviceState[numOpenDevices].name); + return numOpenDevices++; + + case CONSCB_READ: + DeviceOperation(a0, a1, a2, a3, a4); + break; + + case CONSCB_CLOSE: + break; + + case CONSCB_OPEN_CONSOLE: + printf_lock("CONSOLE OPEN\n"); + return 0; /* success */ + break; /* not reached */ + + case CONSCB_CLOSE_CONSOLE: + printf_lock("CONSOLE CLOSE\n"); + return 0; /* success */ + break; /* not reached */ + + default: + panic("CallBackDispatcher(%x,%x,%x,%x,%x)\n", a0, a1, a2, a3, a4); + } + + return 0; } -long CallBackFixup(int a0, int a1, int a2) +long +CallBackFixup(int a0, int a1, int a2) { - long temp; - /* Linux uses r8 for the current pointer (pointer to data structure - contating info about currently running process). It is set when the - kernel starts and is expected to remain there... Problem is that the - unlike the kernel, the console does not prevent the assembler from - using r8. So here is a work around. So far this has only been a problem - in CallBackFixup() but any other call back functions could cause a problem - at some point */ - - /* save off the current pointer to a temp variable */ - asm("bis $8, $31, %0" : "=r" (temp)); - - /* call original code */ - printf_lock("CallbackFixup %x %x, t7=%x\n",a0,a1,temp); - - /* restore the current pointer */ - asm("bis %0, $31, $8" : : "r" (temp) : "$8"); - -#if 0 - if (first[FIRST(a1)]==0) { - first[FIRST(a1)] = KPTE(PFN(reservedFixup)); - } else { - panic("CallBakcfixup\n"); - } - second[SECOND(a1)] = KPTE(PFN(third_rpb)); /* Region 0 */ - printf("Fixup: FISRT(a1)=0x%x SECOND(a1)=0x%x THIRD(a1)=0x%x\n", - FIRST(a1),SECOND(a1),THIRD(a1)); - -#endif - return 0; + long temp; + /* + * Linux uses r8 for the current pointer (pointer to data + * structure contating info about currently running process). It + * is set when the kernel starts and is expected to remain + * there... Problem is that the unlike the kernel, the console + * does not prevent the assembler from using r8. So here is a work + * around. So far this has only been a problem in CallBackFixup() + * but any other call back functions couldd cause a problem at + * some point + */ + + /* save off the current pointer to a temp variable */ + asm("bis $8, $31, %0" : "=r" (temp)); + + /* call original code */ + printf_lock("CallbackFixup %x %x, t7=%x\n", a0, a1, temp); + + /* restore the current pointer */ + asm("bis %0, $31, $8" : : "r" (temp) : "$8"); + + return 0; } - - - - -void SlaveCmd(int cpu, struct rpb_percpu *my_rpb) +void +SlaveCmd(int cpu, struct rpb_percpu *my_rpb) { -/* extern void palJToSlave[]; */ - extern unsigned int palJToSlave[]; + extern ulong palJToSlave[]; - printf_lock("Slave CPU %d console command %s", cpu,my_rpb->rpb_iccb.iccb_rxbuf); + printf_lock("Slave CPU %d console command %s", cpu, + my_rpb->rpb_iccb.iccb_rxbuf); - my_rpb->rpb_state |= STATE_BIP; - my_rpb->rpb_state &= ~STATE_RC; + my_rpb->rpb_state |= STATE_BIP; + my_rpb->rpb_state &= ~STATE_RC; - printf_lock("SlaveCmd: restart %x %x vptb %x my_rpb %x my_rpb_phys %x\n", - rpb->rpb_restart, - rpb->rpb_restart_pv, - rpb->rpb_vptb, my_rpb, - KSEG_TO_PHYS(my_rpb)); + printf_lock("SlaveCmd: restart %x %x vptb %x my_rpb %x my_rpb_phys %x\n", + rpb->rpb_restart, rpb->rpb_restart_pv, rpb->rpb_vptb, my_rpb, + KSEG_TO_PHYS(my_rpb)); - cServe(KSEG_TO_PHYS((ul)palJToSlave), - (ul)rpb->rpb_restart, - CSERVE_K_JTOPAL, - rpb->rpb_restart_pv, - rpb->rpb_vptb, - KSEG_TO_PHYS(my_rpb)); + cServe(KSEG_TO_PHYS(palJToSlave), (ulong)rpb->rpb_restart, + CSERVE_K_JTOPAL, rpb->rpb_restart_pv, rpb->rpb_vptb, + KSEG_TO_PHYS(my_rpb)); - panic("SlaveCmd returned \n"); + panic("SlaveCmd returned \n"); } -void SlaveLoop( int cpu) +void +SlaveLoop(int cpu) { - int size = ROUNDUP128(sizeof(struct rpb_percpu)); - struct rpb_percpu *my_rpb = (struct rpb_percpu*) - ((ul)rpb_percpu + size*cpu); - - if (cpu==0) { - panic("CPU 0 entering slaveLoop. Reenetering the console. HOSED \n"); - } else { - printf_lock("Entering slaveloop for cpu %d my_rpb=%x \n",cpu,my_rpb); - } - - // swap the processors context to the one in the - // rpb_percpu struct very carefully (i.e. no stack usage) - // so that linux knows which processor ends up in __smp_callin - // and we don't trash any data is the process - SlaveSpin(cpu,my_rpb,&my_rpb->rpb_iccb.iccb_rxlen); + int size = ROUNDUP128(sizeof(struct rpb_percpu)); + struct rpb_percpu *my_rpb = (struct rpb_percpu*) + ((ulong)rpb_percpu + size * cpu); + + if (cpu == 0) { + panic("CPU 0 entering slaveLoop. Reenetering the console. HOSED\n"); + } else { + printf_lock("Entering slaveloop for cpu %d my_rpb=%x\n", cpu, my_rpb); + } + + // swap the processors context to the one in the + // rpb_percpu struct very carefully (i.e. no stack usage) + // so that linux knows which processor ends up in __smp_callin + // and we don't trash any data is the process + SlaveSpin(cpu, my_rpb, &my_rpb->rpb_iccb.iccb_rxlen); } diff --git a/system/alpha/console/dbmentry.S b/system/alpha/console/dbmentry.S index df7b39e40..38e614585 100644 --- a/system/alpha/console/dbmentry.S +++ b/system/alpha/console/dbmentry.S @@ -1,139 +1,73 @@ /* -Copyright (c) 2003, 2004 -The Regents of The University of Michigan -All Rights Reserved - -This code is part of the M5 simulator, developed by Nathan Binkert, -Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions -from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew -Schultz. - -Permission is granted to use, copy, create derivative works and -redistribute this software and such derivative works for any purpose, -so long as the copyright notice above, this grant of permission, and -the disclaimer below appear in all copies made; and so long as the -name of The University of Michigan is not used in any advertising or -publicity pertaining to the use or distribution of this software -without specific, written prior authorization. - -THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE -UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT -WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER EXPRESS OR -IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REGENTS OF -THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, -INCLUDING DIRECT, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL -DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR IN CONNECTION -WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS HEREAFTER -ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. -*/ + * Copyright (c) 2003, 2004 + * The Regents of The University of Michigan + * All Rights Reserved + * + * This code is part of the M5 simulator, developed by Nathan Binkert, + * Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions + * from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew + * Schultz. + * + * Permission is granted to use, copy, create derivative works and + * redistribute this software and such derivative works for any purpose, + * so long as the copyright notice above, this grant of permission, and + * the disclaimer below appear in all copies made; and so long as the + * name of The University of Michigan is not used in any advertising or + * publicity pertaining to the use or distribution of this software + * without specific, written prior authorization. + * + * THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE + * UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT + * WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER EXPRESS OR + * IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REGENTS OF + * THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, + * INCLUDING DIRECT, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL + * DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR IN CONNECTION + * WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS HEREAFTER + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + */ /* -Copyright 1993 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -/* taken from ebfw/rom/dbmentry.s */ - -#define EB164 -/*#ifndef LINT -.data -.asciiz "$Id: dbmentry.s,v 1.1.1.1 1997/10/30 23:27:12 verghese Exp $" -.text -#endif -*/ + * Copyright 1993 Hewlett-Packard Development Company, L.P. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + /* * Debug Monitor Entry code */ - -#ifndef MAKEDEPEND -#include "ev5_impure.h" -#include "cserve.h" #include "fromHudsonOsf.h" -#endif - -//#include "paldefs.h" -#include "regdefs.h" -#include "eb164.h" -//#include "ledcodes.h" .text /* return address and padding to octaword align */ #define STARTFRM 16 - .globl __start - .ent __start, 0 -__start: + .globl _start + .ent _start, 0 +_start: _entry: br t0, 2f # get the current PC 2: ldgp gp, 0(t0) # init gp - -#ifdef original_xxm - lda a2, CSERVE_K_RD_IMPURE - call_pal PAL_CSERVE_ENTRY - lda v0, CNS_Q_BASE(v0) - - # Add KSEG offset to the impure area - subq zero, 1, t0 - sll t0, 42, t0 - addq t0, v0, v0 - - lda t0, CNS_Q_SIGNATURE(v0) - bic t0, 0x07, t0 # Clear bottom 3 bits to avoid - # allignment errors if the - # impure area is total rubbish - ldq t0, 0x00(t0) - srl t0, 16, t0 # Shift signature into bottom 16 bits. - lda t6, 0xDECB(zero) # Load the expected valid signature. - zap t6, 0xFC, t6 # Clear the upper bits. - cmpeq t0, t6, t0 # Is this a valid signature? - beq t0, 1f # Not valid, don't trust input params. - -/* - * Init the stack at the first 8K boundary - * below the top of memory. - */ - lda t0, CNS_Q_MEM_SIZE(v0) - ldq t0, 0x00(t0) # Load memory size. - subq t0, 1, t0 # Last address in memory - srl t0, 13, t0 # Align to first 8KB boundary - sll t0, 13, sp # below the top of memory. - br zero, 2f - -/* - * If memory size was not passed in via the - * PALcode impure data use the system specific - * MINIMUM_SYSTEM_MEMORY definition. - */ -1: - lda sp, (MINIMUM_SYSTEM_MEMORY&0xffff)(zero) - ldah sp, ((MINIMUM_SYSTEM_MEMORY+0x8000)>>16)(sp) - lda t0, (8*1024)(zero) # Allow for 8KB guard page. - subq sp, t0, sp - -2: - -#endif /* original_xxm */ - - /* * SimOS. Stack pointer is start of a valid phys or KSEG page */ @@ -146,13 +80,6 @@ slave: lda v0,(8*1024)(sp) /* end of page */ sll t0, 42, t0 bis t0, v0, sp -#ifdef original_xxm - # Add KSEG offset to the stack pointer - subq zero, 1, t0 - sll t0, 42, t0 - addq t0, sp, sp -#endif - lda sp, -STARTFRM(sp) # Create a stack frame stq ra, 0(sp) # Place return address on the stack @@ -186,7 +113,7 @@ master: ldgp gp, 0(ra) bsr zero, _exit -.end __start +.end _start diff --git a/system/alpha/console/paljtokern.S b/system/alpha/console/paljtokern.S index 3e3ec6fa0..539515fe1 100644 --- a/system/alpha/console/paljtokern.S +++ b/system/alpha/console/paljtokern.S @@ -1,97 +1,94 @@ /* -Copyright (c) 2003, 2004 -The Regents of The University of Michigan -All Rights Reserved - -This code is part of the M5 simulator, developed by Nathan Binkert, -Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions -from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew -Schultz. - -Permission is granted to use, copy, create derivative works and -redistribute this software and such derivative works for any purpose, -so long as the copyright notice above, this grant of permission, and -the disclaimer below appear in all copies made; and so long as the -name of The University of Michigan is not used in any advertising or -publicity pertaining to the use or distribution of this software -without specific, written prior authorization. - -THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE -UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT -WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER EXPRESS OR -IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REGENTS OF -THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, -INCLUDING DIRECT, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL -DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR IN CONNECTION -WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS HEREAFTER -ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. -*/ + * Copyright (c) 2003, 2004 + * The Regents of The University of Michigan + * All Rights Reserved + * + * This code is part of the M5 simulator, developed by Nathan Binkert, + * Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions + * from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew + * Schultz. + * + * Permission is granted to use, copy, create derivative works and + * redistribute this software and such derivative works for any purpose, + * so long as the copyright notice above, this grant of permission, and + * the disclaimer below appear in all copies made; and so long as the + * name of The University of Michigan is not used in any advertising or + * publicity pertaining to the use or distribution of this software + * without specific, written prior authorization. + * + * THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE + * UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT + * WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER EXPRESS OR + * IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REGENTS OF + * THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, + * INCLUDING DIRECT, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL + * DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR IN CONNECTION + * WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS HEREAFTER + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + */ + /* -Copyright 1993 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ + * Copyright 1993 Hewlett-Packard Development Company, L.P. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + #include "dc21164FromGasSources.h" // DECchip 21164 specific definitions #include "ev5_defs.h" -#include "fromHudsonOsf.h" // OSF/1 specific definitions -#include "fromHudsonMacros.h" // Global macro definitions -#include "ev5_impure.h" // Scratch & logout area data structures -#include "platform.h" // Platform specific definitions +#include "fromHudsonOsf.h" // OSF/1 specific definitions +#include "fromHudsonMacros.h" // Global macro definitions - .global palJToKern - .text 3 -palJToKern: /* Jump to kernel -args: - Kernel address - a0 - PCBB - a1 - First free PFN - a3? - - Enable kseg addressing in ICSR - Enable kseg addressing in MCSR - Set VTBR -- Set to 1GB as per SRM, or maybe 8GB?? - Set PCBB -- pass pointer in arg - Set PTBR -- get it out of PCB - Set KSP -- get it out of PCB - - Jump to kernel address - - Kernel args- - s0 first free PFN - s1 ptbr - s2 argc 0 - s3 argv NULL - s5 osf_param (sysconfigtab) NULL + * args: + * Kernel address - a0 + * PCBB - a1 + * First free PFN - a3? + * + * Enable kseg addressing in ICSR + * Enable kseg addressing in MCSR + * Set VTBR -- Set to 1GB as per SRM, or maybe 8GB?? + * Set PCBB -- pass pointer in arg + * Set PTBR -- get it out of PCB + * Set KSP -- get it out of PCB + * + * Jump to kernel address + * + * Kernel args- + * s0 first free PFN + * s1 ptbr + * s2 argc 0 + * s3 argv NULL + * s5 osf_param (sysconfigtab) NULL */ + .global palJToKern + .text 3 +palJToKern: ALIGN_BRANCH ldq_p a0, 0(zero) ldq_p a1, 8(zero) ldq_p a3, 16(zero) -#ifdef undef - LDLI(t0,0x200000000) // 8GB, like the Mikasa - LDLI(t0,0x40000000) // 1GB, like the SRM - STALL // don't dual issue the load with mtpr -pb -#endif /* Point the Vptbr at 8GB */ lda t0, 0x1(zero) sll t0, 33, t0 @@ -103,7 +100,7 @@ args: /* Turn on superpage mapping in the mbox and icsr */ lda t0, (2<<MCSR_V_SP)(zero) // Get a '10' (binary) in MCSR<SP> STALL // don't dual issue the load with mtpr -pb - mtpr t0, mcsr // Set the super page mode enable bit + mtpr t0, mcsr // Set the super page mode enable bit STALL // don't dual issue the load with mtpr -pb lda t0, 0(zero) @@ -112,45 +109,45 @@ args: LDLI (t1,0x20000000) STALL // don't dual issue the load with mtpr -pb - mfpr t0, icsr // Enable superpage mapping + mfpr t0, icsr // Enable superpage mapping STALL // don't dual issue the load with mtpr -pb bis t0, t1, t0 mtpr t0, icsr - STALL // Required stall to update chip ... + STALL // Required stall to update chip ... STALL STALL STALL STALL ldq_p s0, PCB_Q_PTBR(a1) - sll s0, VA_S_OFF, s0 // Shift PTBR into position + sll s0, VA_S_OFF, s0 // Shift PTBR into position STALL // don't dual issue the load with mtpr -pb - mtpr s0, ptPtbr // PHYSICAL MBOX INST -> MT PT20 IN 0,1 + mtpr s0, ptPtbr // PHYSICAL MBOX INST -> MT PT20 IN 0,1 STALL // don't dual issue the load with mtpr -pb ldq_p sp, PCB_Q_KSP(a1) - mtpr a0, excAddr // Load the dispatch address. + mtpr a0, excAddr // Load the dispatch address. STALL // don't dual issue the load with mtpr -pb - bis a3, zero, a0 // first free PFN - ldq_p a1, PCB_Q_PTBR(a1) // ptbr - ldq_p a2, 24(zero) // argc - ldq_p a3, 32(zero) // argv - ldq_p a4, 40(zero) // environ - lda a5, 0(zero) // osf_param + bis a3, zero, a0 // first free PFN + ldq_p a1, PCB_Q_PTBR(a1) // ptbr + ldq_p a2, 24(zero) // argc + ldq_p a3, 32(zero) // argv + ldq_p a4, 40(zero) // environ + lda a5, 0(zero) // osf_param STALL // don't dual issue the load with mtpr -pb - mtpr zero, dtbIa // Flush all D-stream TB entries - mtpr zero, itbIa // Flush all I-stream TB entries + mtpr zero, dtbIa // Flush all D-stream TB entries + mtpr zero, itbIa // Flush all I-stream TB entries br zero, 2f ALIGN_BLOCK -2: NOP - mtpr zero, icFlush // Flush the icache. +2: NOP + mtpr zero, icFlush // Flush the icache. NOP NOP - NOP // Required NOPs ... 1-10 + NOP // Required NOPs ... 1-10 NOP NOP NOP @@ -161,7 +158,7 @@ args: NOP NOP - NOP // Required NOPs ... 11-20 + NOP // Required NOPs ... 11-20 NOP NOP NOP @@ -172,7 +169,7 @@ args: NOP NOP - NOP // Required NOPs ... 21-30 + NOP // Required NOPs ... 21-30 NOP NOP NOP @@ -183,7 +180,7 @@ args: NOP NOP - NOP // Required NOPs ... 31-40 + NOP // Required NOPs ... 31-40 NOP NOP NOP @@ -194,13 +191,9 @@ args: NOP NOP - - - NOP // Required NOPs ... 41-44 + NOP // Required NOPs ... 41-44 NOP NOP NOP - hw_rei_stall // Dispatch to kernel - - + hw_rei_stall // Dispatch to kernel diff --git a/system/alpha/console/paljtoslave.S b/system/alpha/console/paljtoslave.S index add6fda95..e67e292b2 100644 --- a/system/alpha/console/paljtoslave.S +++ b/system/alpha/console/paljtoslave.S @@ -1,80 +1,78 @@ /* -Copyright (c) 2003, 2004 -The Regents of The University of Michigan -All Rights Reserved - -This code is part of the M5 simulator, developed by Nathan Binkert, -Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions -from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew -Schultz. - -Permission is granted to use, copy, create derivative works and -redistribute this software and such derivative works for any purpose, -so long as the copyright notice above, this grant of permission, and -the disclaimer below appear in all copies made; and so long as the -name of The University of Michigan is not used in any advertising or -publicity pertaining to the use or distribution of this software -without specific, written prior authorization. - -THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE -UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT -WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER EXPRESS OR -IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REGENTS OF -THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, -INCLUDING DIRECT, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL -DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR IN CONNECTION -WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS HEREAFTER -ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. -*/ + * Copyright (c) 2003, 2004 + * The Regents of The University of Michigan + * All Rights Reserved + * + * This code is part of the M5 simulator, developed by Nathan Binkert, + * Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions + * from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew + * Schultz. + * + * Permission is granted to use, copy, create derivative works and + * redistribute this software and such derivative works for any purpose, + * so long as the copyright notice above, this grant of permission, and + * the disclaimer below appear in all copies made; and so long as the + * name of The University of Michigan is not used in any advertising or + * publicity pertaining to the use or distribution of this software + * without specific, written prior authorization. + * + * THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE + * UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT + * WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER EXPRESS OR + * IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REGENTS OF + * THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, + * INCLUDING DIRECT, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL + * DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR IN CONNECTION + * WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS HEREAFTER + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + */ + /* -Copyright 1993 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ -#include "dc21164FromGasSources.h" // DECchip 21164 specific definitions -#include "ev5_defs.h" -#include "fromHudsonOsf.h" // OSF/1 specific definitions -#include "fromHudsonMacros.h" // Global macro definitions -#include "ev5_impure.h" // Scratch & logout area data structures -#include "platform.h" // Platform specific definitions + * Copyright 1993 Hewlett-Packard Development Company, L.P. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include "dc21164FromGasSources.h" // DECchip 21164 specific definitions +#include "ev5_defs.h" +#include "fromHudsonOsf.h" // OSF/1 specific definitions +#include "fromHudsonMacros.h" // Global macro definitions +/* + * args: + * a0: here + * a1: boot location + * a2: CSERVE_J_KTOPAL + * a3: restrart_pv + * a4: vptb + * a5: my_rpb + * + * SRM Console Architecture III 3-26 + */ .global palJToSlave .text 3 - - /* - * args: - a0: here - a1: boot location - a2: CSERVE_J_KTOPAL - a3: restrart_pv - a4: vptb - a5: my_rpb - - */ palJToSlave: - /* - * SRM Console Architecture III 3-26 - */ - ALIGN_BRANCH bis a3, zero, pv @@ -90,7 +88,7 @@ palJToSlave: /* Turn on superpage mapping in the mbox and icsr */ lda t0, (2<<MCSR_V_SP)(zero) // Get a '10' (binary) in MCSR<SP> STALL // don't dual issue the load with mtpr -pb - mtpr t0, mcsr // Set the super page mode enable bit + mtpr t0, mcsr // Set the super page mode enable bit STALL // don't dual issue the load with mtpr -pb lda t0, 0(zero) @@ -99,54 +97,43 @@ palJToSlave: LDLI (t1,0x20000000) STALL // don't dual issue the load with mtpr -pb - mfpr t0, icsr // Enable superpage mapping + mfpr t0, icsr // Enable superpage mapping STALL // don't dual issue the load with mtpr -pb bis t0, t1, t0 mtpr t0, icsr - STALL // Required stall to update chip ... + STALL // Required stall to update chip ... STALL STALL STALL STALL ldq_p s0, PCB_Q_PTBR(a5) - sll s0, VA_S_OFF, s0 // Shift PTBR into position + sll s0, VA_S_OFF, s0 // Shift PTBR into position STALL // don't dual issue the load with mtpr -pb - mtpr s0, ptPtbr // PHYSICAL MBOX INST -> MT PT20 IN 0,1 + mtpr s0, ptPtbr // PHYSICAL MBOX INST -> MT PT20 IN 0,1 STALL // don't dual issue the load with mtpr -pb ldq_p sp, PCB_Q_KSP(a5) - //mtpr a0, excAddr // Load the dispatch address. - //STALL // don't dual issue the load with mtpr -pb - //bis a3, zero, a0 // first free PFN - // ldq_p a1, PCB_Q_PTBR(a5) // ptbr + mtpr zero, dtbIa // Flush all D-stream TB entries + mtpr zero, itbIa // Flush all I-stream TB entries - //ldq_p a2, 24(zero) // argc - //ldq_p a3, 32(zero) // argv - //ldq_p a4, 40(zero) // environ - //lda a5, 0(zero) // osf_param - //STALL // don't dual issue the load with mtpr -pb - mtpr zero, dtbIa // Flush all D-stream TB entries - mtpr zero, itbIa // Flush all I-stream TB entries - - - mtpr a1, excAddr // Load the dispatch address. + mtpr a1, excAddr // Load the dispatch address. STALL // don't dual issue the load with mtpr -pb STALL // don't dual issue the load with mtpr -pb - mtpr zero, dtbIa // Flush all D-stream TB entries - mtpr zero, itbIa // Flush all I-stream TB entries + mtpr zero, dtbIa // Flush all D-stream TB entries + mtpr zero, itbIa // Flush all I-stream TB entries br zero, 2f ALIGN_BLOCK 2: NOP - mtpr zero, icFlush // Flush the icache. + mtpr zero, icFlush // Flush the icache. NOP NOP - NOP // Required NOPs ... 1-10 + NOP // Required NOPs ... 1-10 NOP NOP NOP @@ -157,7 +144,7 @@ palJToSlave: NOP NOP - NOP // Required NOPs ... 11-20 + NOP // Required NOPs ... 11-20 NOP NOP NOP @@ -168,7 +155,7 @@ palJToSlave: NOP NOP - NOP // Required NOPs ... 21-30 + NOP // Required NOPs ... 21-30 NOP NOP NOP @@ -179,7 +166,7 @@ palJToSlave: NOP NOP - NOP // Required NOPs ... 31-40 + NOP // Required NOPs ... 31-40 NOP NOP NOP @@ -190,12 +177,10 @@ palJToSlave: NOP NOP - - - NOP // Required NOPs ... 41-44 + NOP // Required NOPs ... 41-44 NOP NOP NOP - hw_rei_stall // Dispatch to kernel + hw_rei_stall // Dispatch to kernel diff --git a/system/alpha/console/printf.c b/system/alpha/console/printf.c index 9a92036aa..0e665a434 100644 --- a/system/alpha/console/printf.c +++ b/system/alpha/console/printf.c @@ -1,302 +1,324 @@ /* -Copyright 1993, 1994 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#ifndef LINT -static char *rcsid = "$Id: printf.c,v 1.1.1.1 1997/10/30 23:27:12 verghese Exp $"; -#endif - -/* - * $Log: printf.c,v $ - * Revision 1.1.1.1 1997/10/30 23:27:12 verghese - * current 10/29/97 - * - * Revision 1.1 1995/06/26 21:09:35 berc - * Initial revision - * - * Revision 1.8 1994/10/06 20:29:08 fdh - * Corrected unsigned long declaration. + * Copyright (c) 2003, 2004 + * The Regents of The University of Michigan + * All Rights Reserved * - * Revision 1.7 1994/08/05 20:16:23 fdh - * Updated Copyright header and RCS $Id: identifier. + * This code is part of the M5 simulator, developed by Nathan Binkert, + * Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions + * from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew + * Schultz. * - * Revision 1.6 1994/06/21 15:41:54 rusling - * fixedup WNT compiler warnings + * Permission is granted to use, copy, create derivative works and + * redistribute this software and such derivative works for any purpose, + * so long as the copyright notice above, this grant of permission, and + * the disclaimer below appear in all copies made; and so long as the + * name of The University of Michigan is not used in any advertising or + * publicity pertaining to the use or distribution of this software + * without specific, written prior authorization. * - * Revision 1.5 1994/06/17 19:35:37 fdh - * Clean-up... - * - * Revision 1.4 1994/01/19 10:40:08 rusling - * Ported to Alpha Windows NT. - * - * Revision 1.3 1993/11/02 21:57:45 fdh - * Fixed sign extension problem introduced in version 1.2 + * THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE + * UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT + * WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER EXPRESS OR + * IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REGENTS OF + * THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, + * INCLUDING DIRECT, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL + * DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR IN CONNECTION + * WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS HEREAFTER + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + */ + +/* + * Copyright 1993 Hewlett-Packard Development Company, L.P. * - * Revision 1.2 1993/10/13 15:29:02 rusling - * Added floating point support in printf. This meant adding variable arguments to - * it and FormatItem() and including stdarg.h. + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: * - * Revision 1.1 1993/06/08 19:56:24 fdh - * Initial revision + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. */ - - -/* printf.c - L. S. - Sun Feb 10 20:18:22 1985 - */ - -//#include "system.h" -#include "lib.h" +#include <sys/types.h> #include <stdarg.h> - - - - /* The string s is terminated by a '\0' */ void PutString(const char *s) { - while (*s) PutChar(*s++); + while (*s) + PutChar(*s++); } /* print c count times */ void PutRepChar(char c, int count) { - while (count--) PutChar(c); + while (count--) + PutChar(c); } /* put string reverse */ void PutStringReverse(const char *s, int index) { - while ((index--) > 0) PutChar(s[index]); + while (index-- > 0) + PutChar(s[index]); } -/* prints value in radix, in a field width width, with fill - character fill - if radix is negative, print as signed quantity - if width is negative, left justify - if width is 0, use whatever is needed - if fill is 0, use ' ' +/* + * prints value in radix, in a field width width, with fill + * character fill + * if radix is negative, print as signed quantity + * if width is negative, left justify + * if width is 0, use whatever is needed + * if fill is 0, use ' ' */ void -PutNumber(sl value, int radix, int width, char fill) +PutNumber(long value, int radix, int width, char fill) { - char buffer[40]; - ui bufferindex = 0; - ul uvalue; - uw digit; - uw left = FALSE; - uw negative = FALSE; - - if (fill == 0) fill = ' '; - - if (width < 0) { - width = -width; - left = TRUE; - } - if (width < 0 || width > 80) width = 0; - - if (radix < 0) { - radix = -radix; - if (value < 0) { - negative = TRUE; - value = -value; - } + char buffer[40]; + uint bufferindex = 0; + ulong uvalue; + ushort digit; + ushort left = 0; + ushort negative = 0; + + if (fill == 0) + fill = ' '; + + if (width < 0) { + width = -width; + left = 1; } - switch (radix) { - case 8: - case 10: - case 16: break; - default: { - PutString("****"); - return; - } - } - uvalue = value; - do { - if (radix != 16) - { - digit = (uw)(uvalue % radix); - uvalue /= radix; + + if (width < 0 || width > 80) + width = 0; + + if (radix < 0) { + radix = -radix; + if (value < 0) { + negative = 1; + value = -value; + } } - else - { - digit = (uw)(uvalue & 0xf); - uvalue = uvalue >> 4; + + switch (radix) { + case 8: + case 10: + case 16: + break; + + default: + PutString("****"); + return; } - buffer[bufferindex] = digit + ((digit <= 9) ? '0' : ('A' - 10)); - bufferindex += 1; + + uvalue = value; + + do { + if (radix != 16) { + digit = (ushort)(uvalue % radix); + uvalue /= radix; + } else { + digit = (ushort)(uvalue & 0xf); + uvalue = uvalue >> 4; + } + buffer[bufferindex] = digit + ((digit <= 9) ? '0' : ('A' - 10)); + bufferindex += 1; } while (uvalue != 0); + /* fill # ' ' and negative cannot happen at once */ - if (negative) { - buffer[bufferindex] = '-'; - bufferindex += 1; + if (negative) { + buffer[bufferindex] = '-'; + bufferindex += 1; } - if ((ui)width <= bufferindex) PutStringReverse(buffer, bufferindex); - else { - width -= bufferindex; - if (!left) PutRepChar(fill, width); - PutStringReverse(buffer, bufferindex); - if (left) PutRepChar(fill, width); + + if ((uint)width <= bufferindex) { + PutStringReverse(buffer, bufferindex); + } else { + width -= bufferindex; + if (!left) + PutRepChar(fill, width); + PutStringReverse(buffer, bufferindex); + if (left) + PutRepChar(fill, width); } } -ul power(long base, long n) +ulong +power(long base, long n) { - ul p; + ulong p; - for (p = 1; n > 0; --n) - p = p * base; - return p; + for (p = 1; n > 0; --n) + p = p * base; + return p; } -void putFloat(double a, int fieldwidth, char fill) +void +putFloat(double a, int fieldwidth, char fill) { - int i; - ul b; - -/* - * Put out everything before the decimal place. - */ - PutNumber(((ul) a), 10, fieldwidth, fill); -/* - * Output the decimal place. - */ - PutChar('.' & 0x7f); -/* - * Output the n digits after the decimal place. - */ - for (i = 1; i < 6; i++) { - b = (ul)(power(10, i) * (double)(a - (ul) a)); - PutChar((char)(b % 10) + '0'); - } + int i; + ulong b; + + /* + * Put out everything before the decimal place. + */ + PutNumber(((ulong) a), 10, fieldwidth, fill); + + /* + * Output the decimal place. + */ + PutChar('.' & 0x7f); + + /* + * Output the n digits after the decimal place. + */ + for (i = 1; i < 6; i++) { + b = (ulong)(power(10, i) * (double)(a - (ulong) a)); + PutChar((char)(b % 10) + '0'); + } } + const char * FormatItem(const char *f, va_list *ap) { - char c; - int fieldwidth = 0; - int leftjust = FALSE; - int radix = 0; - char fill = ' '; - if (*f == '0') fill = '0'; - while (c = *f++) { - if (c >= '0' && c <= '9') { - fieldwidth = (fieldwidth * 10) + (c - '0'); - } - else switch (c) { - case '\000': return(--f); - case '%': PutChar('%'); - return(f); - case '-': leftjust = TRUE; - break; - case 'c': { - char a = va_arg(*ap, char *); - - if (leftjust) PutChar(a & 0x7f); - if (fieldwidth > 0) PutRepChar(fill, fieldwidth - 1); - if (!leftjust) PutChar(a & 0x7f); - return(f); - } - case 's': { - const char *a = va_arg(*ap, const char *); - - if (leftjust) PutString((const char *) a); - if (fieldwidth > strlen((const char *) a)) - PutRepChar(fill, fieldwidth - strlen((const char *)a)); - if (!leftjust) PutString((const char *) a); - return(f); + char c; + int fieldwidth = 0; + int leftjust = 0; + int radix = 0; + char fill = ' '; + + if (*f == '0') + fill = '0'; + + while (c = *f++) { + if (c >= '0' && c <= '9') { + fieldwidth = (fieldwidth * 10) + (c - '0'); + } else { + switch (c) { + case '\000': + return(--f); + case '%': + PutChar('%'); + return(f); + case '-': + leftjust = 1; + break; + case 'c': { + char a = (char)va_arg(*ap, int); + + if (leftjust) + PutChar(a & 0x7f); + if (fieldwidth > 0) + PutRepChar(fill, fieldwidth - 1); + if (!leftjust) + PutChar(a & 0x7f); + return(f); + } + case 's': { + const char *a = va_arg(*ap, const char *); + + if (leftjust) + PutString((const char *) a); + if (fieldwidth > strlen((const char *) a)) + PutRepChar(fill, fieldwidth - strlen((const char *)a)); + if (!leftjust) + PutString((const char *) a); + return(f); + } + case 'd': + radix = -10; + break; + case 'u': + radix = 10; + break; + case 'x': + radix = 16; + break; + case 'X': + radix = 16; + break; + case 'o': + radix = 8; + break; + case 'f': { + double a = va_arg(*ap, double); + + putFloat(a, fieldwidth, fill); + return(f); + } + default: /* unknown switch! */ + radix = 3; + break; + } } - case 'd': radix = -10; - break; - case 'u': radix = 10; - break; - case 'x': radix = 16; - break; - case 'X': radix = 16; - break; - case 'o': radix = 8; - break; - case 'f': { - double a = va_arg(*ap, double); - - putFloat(a, fieldwidth, fill); - return(f); - } - default: /* unknown switch! */ - radix = 3; - break; - } - if (radix) break; + + if (radix) + break; } - if (leftjust) fieldwidth = -fieldwidth; - { - sl a = va_arg(*ap, sl); - PutNumber(a, radix, fieldwidth, fill); - } - return(f); + + if (leftjust) + fieldwidth = -fieldwidth; + + long a = va_arg(*ap, long); + PutNumber(a, radix, fieldwidth, fill); + + return(f); } int printf(const char *f, ...) { - va_list ap; + va_list ap; - va_start(ap, f); + va_start(ap, f); - while (*f) { - if (*f == '%') f = FormatItem(f + 1, &ap); - else PutChar(*f++); - } + while (*f) { + if (*f == '%') + f = FormatItem(f + 1, &ap); + else + PutChar(*f++); + } - if (*(f-1)=='\n') { - /* add a line-feed (SimOS console output goes to shell */ - PutChar('\r'); - } + if (*(f - 1) == '\n') { + /* add a line-feed (SimOS console output goes to shell */ + PutChar('\r'); + } - va_end(ap); /* clean up */ - return 0; + va_end(ap); /* clean up */ + return 0; } void panic(const char *f, ...) { - va_list ap; + va_list ap; - va_start(ap, f); + va_start(ap, f); - printf("CONSOLE PANIC (looping): "); - while (*f) { - if (*f == '%') f = FormatItem(f + 1, &ap); - else PutChar(*f++); + printf("CONSOLE PANIC (looping): "); + while (*f) { + if (*f == '%') + f = FormatItem(f + 1, &ap); + else + PutChar(*f++); } - va_end(ap); /* clean up */ - while(1); + va_end(ap); /* clean up */ + while(1); } - - diff --git a/system/alpha/h/cia.h b/system/alpha/h/cia.h deleted file mode 100644 index 864afb27c..000000000 --- a/system/alpha/h/cia.h +++ /dev/null @@ -1,456 +0,0 @@ -/* -Copyright 1993, 1994, 1995 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - - - -#ifndef __CIA_H_LOADED -#define __CIA_H_LOADED - -/* - * $Id: cia.h,v 1.1.1.1 1997/10/30 23:27:14 verghese Exp $; - */ - -/* - * $Log: cia.h,v $ - * Revision 1.1.1.1 1997/10/30 23:27:14 verghese - * current 10/29/97 - * - * Revision 1.3 1995/04/20 16:37:22 cruz - * Made some deletions and modifications. - * - * Revision 1.2 1994/12/19 18:33:02 cruz - * Added some new constants. - * - * Revision 1.1 1994/11/23 19:49:39 cruz - * Initial revision - * - * - */ - -/* - ******************************** WARNING ******************************* - * BE EXTREMELY CAREFUL WHEN USING OFFSETS LARGER THAN 0x8000 WITH - * AN "LDA" INSTRUCTION BECAUSE THEY WILL CAUSE AN UNWANTED SIGN - * EXTENSION. - ******************************** WARNING ******************************* -*/ - -/* ====================================================================== - * = BASE ADDRESSES = - * ====================================================================== - * - * Define the base address for registers accessing the memory - * controller -*/ -#define MC_GCR_BASE 0x874 /* General Control Register */ -#define MC_GCR_BASE_SHIFT 28 /* Shift base by this # of bits */ -#define MC_DIAG_BASE 0x874 /* Diagnostic Registers */ -#define MC_DIAG_BASE_SHIFT 28 -#define MC_PERFMON_BASE 0x874 /* Performance monitoring regs */ -#define MC_PERFMON_BASE_SHIFT 28 -#define MC_ERROR_BASE 0x874 /* Error Registers */ -#define MC_ERROR_BASE_SHIFT 28 -#define MC_MCR_BASE 0x875 /* Memory Configuration Registers*/ -#define MC_MCR_BASE_SHIFT 28 -#define MC_PCI_BASE 0x876 /* PCI Configuration Registers */ -#define MC_PCI_BASE_SHIFT 28 - - -/* ====================================================================== - * = OFFSETS FOR THE GENERAL CONTROL REGISTERS (87.4000.0000) = - * ====================================================================== -*/ -#define MC_PCI_REV 0x80 /* Revision of CIA ASIC. */ -#define MC_PCI_LAT 0xC0 /* PCI Master Latency Timer. */ -#define MC_CIA_CTRL 0x100 /* CIA Control Register. */ -#define MC_CIA_CNFG 0x200 /* CIA Configuration Register. */ -#define MC_HAE_MEM 0x400 /* HW Address Extension (Sparse)*/ -#define MC_HAE_IO 0x440 /* HW Addr. Ext. for sparse IO. */ -#define MC_CFG 0x480 /* Configuration reg for bridges*/ -#define MC_CACK_EN 0x600 /* Acknowledgement Control Reg. */ - - -/* ====================================================================== - * = OFFSETS FOR THE DIAGNOSTIC REGISTERS (87.4000.0000) = - * ====================================================================== -*/ -#define MC_CIA_DIAG 0x2000 /* Diagnostic control register */ -#define MC_DIAG_CHECK 0x3000 /* Diagnostic check register */ - - -/* ====================================================================== - * = OFFSETS FOR THE PERFORMANCE MONITORING REGISTERS (87.4000.0000) = - * ====================================================================== -*/ -#define MC_PERF_MONITOR 0x4000 /* Performance monitor register */ -#define MC_PERF_CONTROL 0x4040 /* Perf. Mon. Control register */ - - -/* ====================================================================== - * = OFFSETS FOR THE ERROR REGISTERS (87.4000.0000) = - * ====================================================================== -*/ -#define MC_CPU_ERR0 0x8000 /* CPU Error Info Register 0. */ -#define MC_CPU_ERR1 0x8040 /* CPU Error Info Register 1. */ -#define MC_CIA_ERR 0x8200 /* CIA Error Register. */ -#define MC_CIA_STAT 0x8240 /* CIA Status Register. */ -#define MC_ERR_MASK 0x8280 /* CIA Error Mask Register. */ -#define MC_CIA_SYN 0x8300 /* CIA Syndrome Register. */ -#define MC_MEM_ERR0 0x8400 /* Memory Port Status Register 0*/ -#define MC_MEM_ERR1 0x8440 /* Memory Port Status Register 1*/ -#define MC_PCI_ERR0 0x8800 /* PCI Error Status Register 0. */ -#define MC_PCI_ERR1 0x8840 /* PCI Error Status Register 1. */ - - -/* ====================================================================== - * = OFFSETS FOR THE MEMORY CONFIGURATION REGISTERS (87.5000.0000) = - * ====================================================================== -*/ -#define MC_MCR 0x0 /* Memory Configuration Register*/ -#define MC_MBA0 0x600 /* Memory Base Address Register */ -#define MC_MBA2 0x680 /* Memory Base Address Register */ -#define MC_MBA4 0x700 /* Memory Base Address Register */ -#define MC_MBA6 0x780 /* Memory Base Address Register */ -#define MC_MBA8 0x800 /* Memory Base Address Register */ -#define MC_MBAA 0x880 /* Memory Base Address Register */ -#define MC_MBAC 0x900 /* Memory Base Address Register */ -#define MC_MBAE 0x980 /* Memory Base Address Register */ -#define MC_TMG0 0xB00 /* Memory Timing Register */ -#define MC_TMG1 0xB40 /* Memory Timing Register */ -#define MC_TMG2 0xB80 /* Memory Timing Register */ - - -/* ====================================================================== - * = OFFSETS FOR THE PCI CONFIGURATION REGISTERS (87.6000.0000) = - * ====================================================================== -*/ -#define MC_TBIA 0x100 /* S/G Translation Buffer Inval.*/ -#define MC_W0_BASE 0x400 /* Window Base 0. */ -#define MC_W0_MASK 0x440 /* Window Mask 0. */ -#define MC_T0_BASE 0x480 /* Translated Base 0. */ -#define MC_W1_BASE 0x500 /* Window Base 1. */ -#define MC_W1_MASK 0x540 /* Window Mask 1. */ -#define MC_T1_BASE 0x580 /* Translated Base 1. */ -#define MC_W2_BASE 0x600 /* Window Base 2. */ -#define MC_W2_MASK 0x640 /* Window Mask 2. */ -#define MC_T2_BASE 0x680 /* Translated Base 2. */ -#define MC_W3_BASE 0x700 /* Window Base 3. */ -#define MC_W3_MASK 0x740 /* Window Mask 3. */ -#define MC_T3_BASE 0x780 /* Translated Base 3. */ -#define MC_DAC 0x7C0 /* Window DAC Base. */ -#define MC_LTB_TAG0 0x800 /* Lockable Translation Buffer. */ -#define MC_LTB_TAG1 0x840 /* Lockable Translation Buffer. */ -#define MC_LTB_TAG2 0x880 /* Lockable Translation Buffer. */ -#define MC_LTB_TAG3 0x8C0 /* Lockable Translation Buffer. */ -#define MC_TB_TAG0 0x900 /* Translation Buffer Tag. */ -#define MC_TB_TAG1 0x940 /* Translation Buffer Tag. */ -#define MC_TB_TAG2 0x980 /* Translation Buffer Tag. */ -#define MC_TB_TAG3 0x9C0 /* Translation Buffer Tag. */ -#define MC_TB0_PAGE0 0x1000 /* Translation Buffer 0 Page. */ -#define MC_TB0_PAGE1 0x1040 /* Translation Buffer 0 Page. */ -#define MC_TB0_PAGE2 0x1080 /* Translation Buffer 0 Page. */ -#define MC_TB0_PAGE3 0x10C0 /* Translation Buffer 0 Page. */ -#define MC_TB1_PAGE0 0x1100 /* Translation Buffer 1 Page. */ -#define MC_TB1_PAGE1 0x1140 /* Translation Buffer 1 Page. */ -#define MC_TB1_PAGE2 0x1180 /* Translation Buffer 1 Page. */ -#define MC_TB1_PAGE3 0x11C0 /* Translation Buffer 1 Page. */ -#define MC_TB2_PAGE0 0x1200 /* Translation Buffer 2 Page. */ -#define MC_TB2_PAGE1 0x1240 /* Translation Buffer 2 Page. */ -#define MC_TB2_PAGE2 0x1280 /* Translation Buffer 2 Page. */ -#define MC_TB2_PAGE3 0x12C0 /* Translation Buffer 2 Page. */ -#define MC_TB3_PAGE0 0x1300 /* Translation Buffer 3 Page. */ -#define MC_TB3_PAGE1 0x1340 /* Translation Buffer 3 Page. */ -#define MC_TB3_PAGE2 0x1380 /* Translation Buffer 3 Page. */ -#define MC_TB3_PAGE3 0x13C0 /* Translation Buffer 3 Page. */ -#define MC_TB4_PAGE0 0x1400 /* Translation Buffer 4 Page. */ -#define MC_TB4_PAGE1 0x1440 /* Translation Buffer 4 Page. */ -#define MC_TB4_PAGE2 0x1480 /* Translation Buffer 4 Page. */ -#define MC_TB4_PAGE3 0x14C0 /* Translation Buffer 4 Page. */ -#define MC_TB5_PAGE0 0x1500 /* Translation Buffer 5 Page. */ -#define MC_TB5_PAGE1 0x1540 /* Translation Buffer 5 Page. */ -#define MC_TB5_PAGE2 0x1580 /* Translation Buffer 5 Page. */ -#define MC_TB5_PAGE3 0x15C0 /* Translation Buffer 5 Page. */ -#define MC_TB6_PAGE0 0x1600 /* Translation Buffer 6 Page. */ -#define MC_TB6_PAGE1 0x1640 /* Translation Buffer 6 Page. */ -#define MC_TB6_PAGE2 0x1680 /* Translation Buffer 6 Page. */ -#define MC_TB6_PAGE3 0x16C0 /* Translation Buffer 6 Page. */ -#define MC_TB7_PAGE0 0x1700 /* Translation Buffer 7 Page. */ -#define MC_TB7_PAGE1 0x1740 /* Translation Buffer 7 Page. */ -#define MC_TB7_PAGE2 0x1780 /* Translation Buffer 7 Page. */ -#define MC_TB7_PAGE3 0x17C0 /* Translation Buffer 7 Page. */ - - -/* ====================================================================== - * = BIT EXTENT FOR CIA_CTRL REGISTER (87.4000.0100) = - * ====================================================================== -*/ -#define MC_CIA_CTRL_V_PCI_EN 0 -#define MC_CIA_CTRL_M_PCI_EN (1 << MC_CIA_CTRL_V_PCI_EN) -#define MC_CIA_CTRL_V_PCI_LOCK_EN 1 -#define MC_CIA_CTRL_M_PCI_LOCK_EN (1 << MC_CIA_CTRL_V_PCI_LOCK_EN) -#define MC_CIA_CTRL_V_PCI_LOOP_EN 2 -#define MC_CIA_CTRL_M_PCI_LOOP_EN (1 << MC_CIA_CTRL_V_PCI_LOOP_EN) -#define MC_CIA_CTRL_V_FST_BB_EN 3 -#define MC_CIA_CTRL_M_FST_BB_EN (1 << MC_CIA_CTRL_V_FST_BB_EN) -#define MC_CIA_CTRL_V_PCI_MST_EN 4 -#define MC_CIA_CTRL_M_PCI_MST_EN (1 << MC_CIA_CTRL_V_PCI_MST_EN) -#define MC_CIA_CTRL_V_PCI_MEM_EN 5 -#define MC_CIA_CTRL_M_PCI_MEM_EN (1 << MC_CIA_CTRL_V_PCI_MEM_EN) -#define MC_CIA_CTRL_V_PCI_REQ64_EN 6 -#define MC_CIA_CTRL_M_PCI_REQ64_EN (1 << MC_CIA_CTRL_V_PCI_REQ64_EN) -#define MC_CIA_CTRL_V_PCI_ACK64_EN 7 -#define MC_CIA_CTRL_M_PCI_ACK64_EN (1 << MC_CIA_CTRL_V_PCI_ACK64_EN) -#define MC_CIA_CTRL_V_ADDR_PE_EN 8 -#define MC_CIA_CTRL_M_ADDR_PE_EN (1 << MC_CIA_CTRL_V_ADDR_PE_EN) -#define MC_CIA_CTRL_V_PERR_EN 9 -#define MC_CIA_CTRL_M_PERR_EN (1 << MC_CIA_CTRL_V_PERR_EN) -#define MC_CIA_CTRL_V_FILLERR_EN 10 -#define MC_CIA_CTRL_M_FILLERR_EN (1 << MC_CIA_CTRL_V_FILLERR_EN) -#define MC_CIA_CTRL_V_MCHKERR_EN 11 -#define MC_CIA_CTRL_M_MCHKERR_EN (1 << MC_CIA_CTRL_V_MCHKERR_EN) -#define MC_CIA_CTRL_V_ECC_CHK_EN 12 -#define MC_CIA_CTRL_M_ECC_CHK_EN (1 << MC_CIA_CTRL_V_ECC_CHK_EN) -#define MC_CIA_CTRL_V_ASSERT_IDLE_BC 13 -#define MC_CIA_CTRL_M_ASSERT_IDLE_BC (1 << MC_CIA_CTRL_V_ASSERT_IDLE_BC) -#define MC_CIA_CTRL_V_CON_IDLE_BC 14 -#define MC_CIA_CTRL_M_CON_IDLE_BC (1 << MC_CIA_CTRL_V_CON_IDLE_BC) -#define MC_CIA_CTRL_V_CSR_IOA_BYPASS 15 -#define MC_CIA_CTRL_M_CSR_IOA_BYPASS (1 << MC_CIA_CTRL_V_CSR_IOA_BYPASS ) -#define MC_CIA_CTRL_V_IO_FLUSHREQ_EN 16 -#define MC_CIA_CTRL_M_IO_FLUSHREQ_EN (1 << MC_CIA_CTRL_V_IO_FLUSHREQ_EN ) -#define MC_CIA_CTRL_V_CPU_FLUSHREQ_EN 17 -#define MC_CIA_CTRL_M_CPU_FLUSHREQ_EN (1 << MC_CIA_CTRL_V_CPU_FLUSHREQ_EN ) -#define MC_CIA_CTRL_V_ARB_EV5_EN 18 -#define MC_CIA_CTRL_M_ARB_EV5_EN (1 << MC_CIA_CTRL_V_ARB_EV5_EN) -#define MC_CIA_CTRL_V_EN_ARB_LINK 19 -#define MC_CIA_CTRL_M_EN_ARB_LINK (1 << MC_CIA_CTRL_V_EN_ARB_LINK) -#define MC_CIA_CTRL_V_RD_TYPE 20 -#define MC_CIA_CTRL_M_RD_TYPE (3 << MC_CIA_CTRL_V_RD_TYPE) -#define MC_CIA_CTRL_V_RL_TYPE 24 -#define MC_CIA_CTRL_M_RL_TYPE (3 << MC_CIA_CTRL_V_RL_TYPE) -#define MC_CIA_CTRL_V_RM_TYPE 28 -#define MC_CIA_CTRL_M_RM_TYPE (3 << MC_CIA_CTRL_V_RM_TYPE) - - -/* ====================================================================== - * = BIT EXTENT FOR CACK_EN REGISTER (87.4000.0600) = - * ====================================================================== -*/ -#define MC_CACK_EN_V_MEM_LOCK 0x0 /* Controls LOCK enable. */ -#define MC_CACK_EN_V_MB 0x1 /* Controls MB enable. */ -#define MC_CACK_EN_V_SET_DIRTY 0x2 /* Controls SET_DIRTY enable. */ -#define MC_CACK_EN_V_BC_VICTIM 0x3 /* Controls BC_VICTIM enable. */ - - -/* ====================================================================== - * = BIT SIZES FOR CACK_EN REGISTER (87.4000.0600) = - * ====================================================================== -*/ -#define MC_CACK_EN_S_MEM_LOCK 1 /* Controls LOCK enable. */ -#define MC_CACK_EN_S_MB 1 /* Controls MB enable. */ -#define MC_CACK_EN_S_SET_DIRTY 1 /* Controls SET_DIRTY enable. */ -#define MC_CACK_EN_S_BC_VICTIM 1 /* Controls BC_VICTIM enable. */ - -/* ====================================================================== - * = BIT MASKS FOR CACK_EN REGISTER (87.4000.0600) = - * ====================================================================== -*/ -#define MC_CACK_EN_M_MEM_LOCK (((1<<MC_CACK_EN_S_MEM_LOCK)-1) << MC_CACK_EN_V_MEM_LOCK) -#define MC_CACK_EN_M_MB (((1<<MC_CACK_EN_S_MB)-1) << MC_CACK_EN_V_MB) -#define MC_CACK_EN_M_SET_DIRTY (((1<<MC_CACK_EN_S_SET_DIRTY)-1) << MC_CACK_EN_V_SET_DIRTY) -#define MC_CACK_EN_M_BC_VICTIM (((1<<MC_CACK_EN_S_BC_VICTIM)-1) << MC_CACK_EN_V_BC_VICTIM) - - -/* ====================================================================== - * = BIT EXTENT FOR MCR REGISTER (87.5000.0000) = - * ====================================================================== -*/ -#define MC_MCR_V_MEM_SIZE 0x0 /* 1 = 256-bit data, 0 = 128-bit*/ -#define MC_MCR_V_CACHE_SIZE 0x4 /* Set to match CPU's cache size*/ -#define MC_MCR_V_REF_RATE 0x8 /* Refresh rate counter. */ -#define MC_MCR_V_REF_BURST 0x18 /* Refresh burst. */ -#define MC_MCR_V_TMG_R0 0x20 /* Row address setup. */ -#define MC_MCR_V_LONG_CBR_CAS 0x22 /* Refresh CAS pulse width. */ -#define MC_MCR_V_DLY_IDLE_BC 0x26 /* ??. */ -#define MC_MCR_V_EARLY_IDLE_BC 0x29 /* ??. */ - - -/* ====================================================================== - * = BIT SIZES FOR MCR REGISTER (87.5000.0000) = - * ====================================================================== -*/ -#define MC_MCR_S_MEM_SIZE 1 -#define MC_MCR_S_CACHE_SIZE 3 -#define MC_MCR_S_REF_RATE 10 -#define MC_MCR_S_REF_BURST 2 -#define MC_MCR_S_TMG_R0 2 -#define MC_MCR_S_LONG_CBR_CAS 1 -#define MC_MCR_S_DLY_IDLE_BC 2 -#define MC_MCR_S_EARLY_IDLE_BC 1 - -/* ====================================================================== - * = BIT MASKS FOR MCR REGISTER (87.5000.0000) = - * ====================================================================== -*/ -#define MC_MCR_M_MEM_SIZE (((1<<MC_MCR_S_MEM_SIZE)-1) << MC_MCR_V_MEM_SIZE) -#define MC_MCR_M_CACHE_SIZE (((1<<MC_MCR_S_CACHE_SIZE)-1) << MC_MCR_V_CACHE_SIZE) -#define MC_MCR_M_REF_RATE (((1<<MC_MCR_S_REF_RATE)-1) << MC_MCR_V_REF_RATE) -#define MC_MCR_M_REF_BURST (((1<<MC_MCR_S_REF_BURST)-1) << MC_MCR_V_REF_BURST) -#define MC_MCR_M_TMG_R0 (((1<<MC_MCR_S_TMG_R0)-1) << MC_MCR_V_TMG_R0) -#define MC_MCR_M_LONG_CBR_CAS (((1<<MC_MCR_S_LONG_CBR_CAS)-1) << MC_MCR_V_LONG_CBR_CAS) -#define MC_MCR_M_DLY_IDLE_BC (((1<<MC_MCR_S_DLY_IDLE_BC)-1) << MC_MCR_V_DLY_IDLE_BC) -#define MC_MCR_M_EARLY_IDLE_BC (((1<<MC_MCR_S_EARLY_IDLE_BC)-1) << MC_MCR_V_EARLY_IDLE_BC) - -/* ====================================================================== - * = BIT EXTENT FOR TIMING REGISTERS = - * ====================================================================== -*/ -#define MC_TMG_V_R1 0 /* [1:0] row address hold */ -#define MC_TMG_V_R2 2 /* [3:2] row address hold */ -#define MC_TMG_V_R3 4 /* [5:4] read, cycle time */ -#define MC_TMG_V_R4 6 /* [7:6] read, delay from */ - /* MEM_RD_RDY to CAS assertion */ -#define MC_TMG_V_R5 8 /* [9:8] read, cas pulse width */ -#define MC_TMG_V_R6 10 /* [11:10] read, column address hold*/ -#define MC_TMG_V_W1 12 /* [13:12] writes, non-linked */ - /* victim, delay from start to MEM_WR */ -#define MC_TMG_V_W4 14 /*[16:14] writes, MEM_WR to CAS assert*/ -#define MC_TMG_V_PRE 17 /* [17] RAS Pre-charge delay */ - /* __0=no delay, 1=delay 30 ns */ -#define MC_TMG_V_V3 18 /* [19:18] write, cycle time */ -#define MC_TMG_V_V4 20 /* [22:20] linked victim, */ - /* MEM_WR to CAS assertion */ -#define MC_TMG_V_V5 24 /* [25:24] write, victim, CAS */ - /* pulse width */ -#define MC_TMG_V_V6 26 /* [27:26] victim/write, column*/ - /* address hold */ -#define MC_TMG_V_RV 28 /* [29:28] read-victim, delay */ - /* from MEM_RD_RDY de-assertion*/ - /* to MEM_WR */ -#define MC_TMG_V_RD_DLY 30 /* [31:30] select clk the dsw */ - /* will use to capture memory */ - /* data 0=CLK, 1=CLK2X */ - - -/* ====================================================================== - * = BIT EXTENT FOR MBA REGISTERS (87.5000.0600 + n*80) = - * ====================================================================== -*/ -#define MC_MBA_V_S0_VALID 0 /* Side 0 for the bank is valid */ -#define MC_MBA_V_ROW_TYPE 1 /* Row and Column configuration */ -#define MC_MBA_V_MASK 4 /* Indicates size of mem SIMMs */ -#define MC_MBA_V_S1_VALID 15 /* Side 1 for the bank is valid */ -#define MC_MBA_V_PATTERN 16 /* Base address of the bank */ -#define MC_MBA_V_TMG_SEL 28 /* Select timing register. */ - -/* ====================================================================== - * = BIT FIELD VALUES FOR MBA REGISTERS (87.5000.0600 + n*80) = - * ====================================================================== -*/ -#define MC_MBA_V_ROW_TYPE_10X10 0 /* 10 row, 10 column */ -#define MC_MBA_V_ROW_TYPE_12X10 1 /* 12 row, 10 column */ -#define MC_MBA_V_ROW_TYPE_11X11 1 /* 11 row, 11 column */ -#define MC_MBA_V_ROW_TYPE_13X11 2 /* 13 row, 11 column */ -#define MC_MBA_V_ROW_TYPE_12X12 2 /* 12 row, 12 column */ - -#define MC_MBA_V_TMG_SEL_TMG0 0 /* Select timing register 0. */ -#define MC_MBA_V_TMG_SEL_TMG1 1 /* Select timing register 1. */ -#define MC_MBA_V_TMG_SEL_TMG2 2 /* Select timing register 2. */ - - -/* ====================================================================== - * = BIT SIZES FOR MBA REGISTERS (87.5000.0600 + n*80) = - * ====================================================================== -*/ -#define MC_MBA_S_S0_VALID 1 -#define MC_MBA_S_ROW_TYPE 2 -#define MC_MBA_S_MASK 5 -#define MC_MBA_S_S1_VALID 1 -#define MC_MBA_S_PATTERN 10 -#define MC_MBA_S_TMG_SEL 2 - -/* ====================================================================== - * = BIT MASKS FOR MBA REGISTERS (87.5000.0600 + n*80) = - * ====================================================================== -*/ -#define MC_MBA_M_S0_VALID (((1<<MC_MBA_S_S0_VALID)-1) << MC_MBA_V_S0_VALID) -#define MC_MBA_M_ROW_TYPE (((1<<MC_MBA_S_ROW_TYPE)-1) << MC_MBA_V_ROW_TYPE) -#define MC_MBA_M_MASK (((1<<MC_MBA_S_MASK)-1) << MC_MBA_V_MASK) -#define MC_MBA_M_S1_VALID (((1<<MC_MBA_S_S1_VALID)-1) << MC_MBA_V_S1_VALID) -#define MC_MBA_M_PATTERN (((1<<MC_MBA_S_PATTERN)-1) << MC_MBA_V_PATTERN) -#define MC_MBA_M_TMG_SEL (((1<<MC_MBA_S_TMG_SEL)-1) << MC_MBA_V_TMG_SEL) - - - -#define cia_k_main_csr_base 0x0874 /* CIA General Control Register Base*/ -#define cia_v_main_csr_base 28 /* Shift base by this # of bits */ - -/* Offsets from CIA control base register. */ - -#define hae_mem 0x0400 -#define hae_io 0x0440 - -#define cia_err 0x8200 -#define cia_err_mask 0x8280 -#define cia_err_v_rcvd_mas_abt 7 -#define cia_err_m_rcvd_mas_abt (1 << cia_err_v_rcvd_mas_abt) -#define cia_err_mask_v_mas_abt 7 -#define cia_err_mask_m_mas_abt (1 << cia_err_mask_v_mas_abt) - -#define cia_k_addr_trans 0x876 /* CIA's PCI Address Translation Regs*/ -#define cia_v_addr_trans 28 /* Shift base by this # of bits */ - -/* Offsets from PCI address translation base register. Must be < 0x8000 */ -/* if they are to be used with LDA instructions! */ -#define w_base0 0x0400 -#define w_mask0 0x0440 -#define t_base0 0x0480 -#define w_base1 0x0500 -#define w_mask1 0x0540 -#define t_base1 0x0580 -#define w_base2 0x0600 -#define w_mask2 0x0640 -#define t_base2 0x0680 -#define w_base3 0x0700 -#define w_mask3 0x0740 -#define t_base3 0x0780 - -#define w_v_en 0x0 -#define w_m_en (1 << w_v_en) - - - -/* CIA Memory Control Register. */ -#define mcr 0 -#define mba 0x600 -#define mba_v_disp 0x7 -#define mba_k_disp 0x80 /* 1 << mba_v_disp */ - - - -/* The following constants define which bits are provided by the HAE_MEM*/ -/* register for each of the three sparse regions. */ -#define hae_sp1_bits 0xE0000000 -#define hae_sp2_bits 0xF8000000 -#define hae_sp3_bits 0xFC000000 - -#endif /* __CIA_H_LOADED */ diff --git a/system/alpha/h/cserve.h b/system/alpha/h/cserve.h index 1e42495d0..495e9f8a8 100644 --- a/system/alpha/h/cserve.h +++ b/system/alpha/h/cserve.h @@ -1,85 +1,32 @@ /* -Copyright 1993, 1994 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - - -/* - * VID: [T1.2] PT: [Fri Apr 21 16:47:20 1995] SF: [cserve.h] - * TI: [/sae_users/cruz/bin/vice -iplatform.s -l// -p# -DEB164 -h -m -aeb164 ] + * Copyright 1993 Hewlett-Packard Development Company, L.P. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. */ + #define __CSERVE_LOADED 1 -/* -***************************************************************************** -** -** FACILITY: -** -** DECchip 21164 OSF/1 PALcode -** -** MODULE: -** -** cserve.h -** -** MODULE DESCRIPTION: -** -** Platform specific cserve definitions. -** -** AUTHOR: ES -** -** CREATION DATE: 21-JUN-1994 -** -** $Id: cserve.h,v 1.1.1.1 1997/10/30 23:27:18 verghese Exp $ -** -** MODIFICATION HISTORY: -** -** $Log: cserve.h,v $ -** Revision 1.1.1.1 1997/10/30 23:27:18 verghese -** current 10/29/97 -** -** Revision 1.6 1995/04/03 17:29:52 samberg -** Add rd_bccfg_off -** -** Revision 1.5 1995/02/02 19:31:34 samberg -** Added WR_BCACHE, deleted WR_BCCFG and WR_BCCTL -** -** Revision 1.4 1994/12/08 17:13:34 samberg -** Add CSERVE_K_WR_BCCTL and CSERVE_K_WR_BCCFG -** -** Revision 1.3 1994/11/30 15:59:30 samberg -** Use c-style comments for c compiler use -** -** Revision 1.2 1994/11/22 19:02:46 samberg -** Add constants for ev4 backward compatibility -** -** Revision 1.2 1994/11/22 19:02:46 samberg -** Add constants for ev4 backward compatibility -** -** Revision 1.1 1994/07/08 17:01:40 samberg -** Initial revision -** -** -*/ /* -** Console Service (cserve) sub-function codes: -*/ + * Console Service (cserve) sub-function codes: + */ #define CSERVE_K_LDQP 0x01 #define CSERVE_K_STQP 0x02 #define CSERVE_K_JTOPAL 0x09 diff --git a/system/alpha/h/dc21164FromGasSources.h b/system/alpha/h/dc21164FromGasSources.h index bdb1251a0..e5d7c53bc 100644 --- a/system/alpha/h/dc21164FromGasSources.h +++ b/system/alpha/h/dc21164FromGasSources.h @@ -1,107 +1,32 @@ /* -Copyright 1993 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ + * Copyright 1993 Hewlett-Packard Development Company, L.P. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ #ifndef DC21164FROMGASSOURCES_INCLUDED #define DC21164FROMGASSOURCES_INCLUDED 1 /* ** -** FACILITY: -** -** DECchip 21164 PALcode -** -** MODULE: -** -** dc21164.h -** -** MODULE DESCRIPTION: -** -** DECchip 21164 specific definitions -** -** AUTHOR: ER -** -** CREATION DATE: 24-Nov-1993 -** -** $Id: dc21164FromGasSources.h,v 1.1.1.1 1997/10/30 23:27:19 verghese Exp $ -** -** MODIFICATION HISTORY: -** -** $Log: dc21164FromGasSources.h,v $ -** Revision 1.1.1.1 1997/10/30 23:27:19 verghese -** current 10/29/97 -** -** Revision 1.1 1995/11/18 01:45:46 boyle -** Initial revision -** -** Revision 1.15 1995/04/21 02:06:30 fdh -** Replaced C++ style comments with Standard C style comments. -** -** Revision 1.14 1995/03/20 14:55:23 samberg -** Add flushIc to make Roger Cruz's life easier. -** -** Revision 1.13 1994/12/14 15:52:48 samberg -** Add slXmit and slRcv bit definitions -** -** Revision 1.12 1994/09/07 15:43:49 samberg -** Changes for Makefile.vpp, take out OSF definition -** -** Revision 1.11 1994/07/26 17:38:35 samberg -** Changes for SD164. -** -** Revision 1.10 1994/07/08 17:02:12 samberg -** Changes to support platform specific additions -** -** Revision 1.8 1994/05/31 15:49:21 ericr -** Moved ptKdebug from pt10 to pt13; pt10 is used in MCHK flows -** -** Revision 1.7 1994/05/26 19:29:51 ericr -** Added BC_CONFIG definitions -** -** Revision 1.6 1994/05/25 14:27:25 ericr -** Added physical bit to ldq_lp and stq_cp macros -** -** Revision 1.5 1994/05/20 18:07:50 ericr -** Changed line comments to C++ style comment character -** -** Revision 1.4 1994/01/17 21:46:54 ericr -** Added floating point register definitions -** -** Revision 1.3 1994/01/03 19:31:49 ericr -** Added cache parity error status register definitions -** -** Revision 1.2 1993/12/22 20:42:35 eric -** Added ptTrap, ptMisc and flag definitions -** Added PAL shadow regsiter definitions -** -** Revision 1.1 1993/12/16 21:55:05 eric -** Initial revision -** -** -**-- -*/ - - -/* -** ** INTERNAL PROCESSOR REGISTER DEFINITIONS ** ** The internal processor register definitions below are annotated diff --git a/system/alpha/h/eb164.h b/system/alpha/h/eb164.h deleted file mode 100644 index 7c9bff3f1..000000000 --- a/system/alpha/h/eb164.h +++ /dev/null @@ -1,184 +0,0 @@ -/* -Copyright 1993 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#ifndef __EB164_H_LOADED -#define __EB164_H_LOADED - -/* - * $Id: eb164.h,v 1.1.1.1 1997/10/30 23:27:14 verghese Exp $; - */ - -/* - * $Log: eb164.h,v $ - * Revision 1.1.1.1 1997/10/30 23:27:14 verghese - * current 10/29/97 - * - * Revision 1.3 1995/02/10 02:21:36 fdh - * Corrected EB164 banner. - * - * Revision 1.2 1994/12/07 21:24:58 cruz - * Added constant defining the maximum size of the BCache - * - * Revision 1.1 1994/11/23 19:47:30 cruz - * Initial revision - * - * - */ - -#ifdef EB164 - -#define BANNER "DECchip 21164 Evaluation Board (EB164) Debug Monitor" -#define PROMPT "EB164> " - -/**************************************************************************** - * Basic * - ****************************************************************************/ - -#define NEEDPCI -#define NEEDDEBUGGER -#define NEEDFLOPPY - -/**************************************************************************** - * CIA (Part of CIA) definitions * - ****************************************************************************/ -#include "cia.h" - -/**************************************************************************** - * Plug in cards, what does it have? * - ****************************************************************************/ -/* - * The Allied Telesis card is an ISA card based on the am79c960 - * chip. - */ -#define ALLIED_TELESIS_AT_1500T - -/* - * The DEC Etherworks ISA card is a LANCE like device. - */ -#define DEC_ETHERWORKS - -#define NEED21040 - -/**************************************************************************** - * ISA Address Space * - ****************************************************************************/ - -#define RTCBASE 0x70 -#define LEDPORT 0x80 /* JDR Microdevices P.O.S.T. Diagnostics Card. */ - - -/* - * Allied telesis is optional. We treat it like an optional - * am79c960 as far as the driver is concerned, see /h/am79c960.h - * for more definitions and /ether/am79c960_device.c for the device - * driver. - */ -#ifdef ALLIED_TELESIS_AT_1500T -#define OPTIONAL_AM79C960 /* warning only define this once - kmc */ -#define NEEDAM79C960 /* same for this */ -#define OPTIONAL_AM79C960_BASE 0x360 -#define OPTIONAL_AM79C960_INT 9 - -/* - * This parameter determines the - * DMA Mask for the DMA2 controller. - * Mask Channel - * ---- ------- - * 1 5 - * 2 6 - * 3 7 - * 4 8 - */ -#define OPTIONAL_AM79C960_DMA 1 /* Selects DMA Channel 5 */ -#endif - -#ifdef DEC_ETHERWORKS -#define DEC_ETHERWORKS_BASE 0x300 -#endif - -#ifdef DEC_ETHERWORKS -#define DEC_ETHERWORKS_BASE 0x300 -#endif - - -/**************************************************************************** - * System Address Space * - ****************************************************************************/ - -#define MINIMUM_SYSTEM_MEMORY 0x1000000 /* 16MB */ -#define MAXIMUM_SYSTEM_CACHE 0x800000 /* 8MB */ -#define DMA_BUFF_BASE 0x100000 - - -/**************************************************************************** - * PCI I/O Address Space * - ****************************************************************************/ -/* - * Definitions for the windows mapping PCI addresses into - * system addresses - * - * 16 megabyte window starting at CPU address = 0. - */ - -#define PCI_BASE_1_USED 1 -#define PCI_BASE_1 0x000100000 -#define PCI_MASK_1 0x000000000 -#define PCI_TBASE_1 0x000100000 - -#define PCI_BASE_2_USED 0 -#define PCI_BASE_2 0x000000000 -#define PCI_MASK_2 0x000000000 -#define PCI_TBASE_2 0x000000000 - -#define PCI_BASE_3_USED 0 -#define PCI_BASE_3 0x000000000 -#define PCI_MASK_3 0x000000000 -#define PCI_TBASE_3 0x000000000 - -#define PCI_BASE_4_USED 0 -#define PCI_BASE_4 0x000000000 -#define PCI_MASK_4 0x00000000 -#define PCI_TBASE_4 0x000000000 - -/* - * Each mask translates to a number of these units. For - * APECS this unit is 1Kbyte. - */ -#define PCI_MASK_UNIT 0x100000 - -/* - * Where do we start allocating addresses from in PCI I/O space? - */ -#define PCI_IO_BASE 0xB000 - -/* - * ROM definitions. - */ -#define NEEDFLASHMEMORY -#define INTEL_28F008SA -#define ROMBASE 0xFFF80000 -#define ROMSIZE 0x100000 -#define ROMINC 0x1 - -#endif /* EB164 */ -#endif /* __EB164_H_LOADED */ - diff --git a/system/alpha/h/ev5_alpha_defs.h b/system/alpha/h/ev5_alpha_defs.h index 84faf92b5..6dd9322c6 100644 --- a/system/alpha/h/ev5_alpha_defs.h +++ b/system/alpha/h/ev5_alpha_defs.h @@ -1,24 +1,26 @@ /* -Copyright 1993 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ + * Copyright 1993 Hewlett-Packard Development Company, L.P. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ #ifndef EV5_ALPHA_DEFS_INCLUDED #define EV5_ALPHA_DEFS_INCLUDED 1 @@ -26,24 +28,19 @@ SOFTWARE. // from ev5_alpha_defs.mar from Lance's fetch directory // Lower-caseified and $ signs removed ... pb Nov/95 -// .MACRO _ALPHADEFS -// ALPHADEF_VER == 6 ; Flag the version number of this file. -// .ENDM -// .MACRO _PSDEF,_GBL -// _DEFINI PS,_GBL -//;+ -//; PS Layout - PS -//; Loc Size name function -//; ------ ------ ______ ----------------------------------- -//; <31:29> 3 SA stack alignment -//; <31:13> 24 RES Reserved MBZ -//; <12:8> 5 IPL Priority level -//; <7> 1 VMM Virtual Mach Monitor -//; <6:5> 2 RES Reserved MBZ -//; <4:3> 2 CM Current Mode -//; <2> 1 IP Interrupt Pending -//; <1:0> 2 SW Software bits -//;- +// +// PS Layout - PS +// Loc Size name function +// ------ ------ ______ ----------------------------------- +// <31:29> 3 SA stack alignment +// <31:13> 24 RES Reserved MBZ +// <12:8> 5 IPL Priority level +// <7> 1 VMM Virtual Mach Monitor +// <6:5> 2 RES Reserved MBZ +// <4:3> 2 CM Current Mode +// <2> 1 IP Interrupt Pending +// <1:0> 2 SW Software bits +// #define ps_v_sw 0 #define ps_m_sw (3<<ps_v_sw) @@ -101,33 +98,29 @@ SOFTWARE. #define ps_c_ipl30 (0x1E00) #define ps_c_ipl31 (0x1F00) -// _DEFEND PS,_GBL,DEF -// .ENDM -//;+ -//; PTE layout - symbol prefix PTE_ -//; -//; Loc Size name function -//; ------ ------ ------ ----------------------------------- -//; <63:32> 32 PFN Page Frame Number -//; <31:16> 16 SOFT Bits reserved for software use -//; <15> 1 UWE User write enable -//; <14> 1 SWE Super write enable -//; <13> 1 EWE Exec write enable -//; <12> 1 KWE Kernel write enable -//; <11> 1 URE User read enable -//; <10> 1 SRE Super read enable -//; <9> 1 ERE Exec read enable -//; <8> 1 KRE Kernel read enable -//; <7:6> 2 RES Reserved SBZ -//; <5> 1 HPF Huge Page Flag -//; <4> 1 ASM Wild card address space number match -//; <3> 1 FOE Fault On execute -//; <2> 1 FOW Fault On Write -//; <1> 1 FOR Fault On Read -//; <0> 1 V valid bit -//;- -// .MACRO _PTEDEF,_GBL -// _DEFINI PTE,_GBL +// +// PTE layout - symbol prefix PTE_ +// +// Loc Size name function +// ------ ------ ------ ----------------------------------- +// <63:32> 32 PFN Page Frame Number +// <31:16> 16 SOFT Bits reserved for software use +// <15> 1 UWE User write enable +// <14> 1 SWE Super write enable +// <13> 1 EWE Exec write enable +// <12> 1 KWE Kernel write enable +// <11> 1 URE User read enable +// <10> 1 SRE Super read enable +// <9> 1 ERE Exec read enable +// <8> 1 KRE Kernel read enable +// <7:6> 2 RES Reserved SBZ +// <5> 1 HPF Huge Page Flag +// <4> 1 ASM Wild card address space number match +// <3> 1 FOE Fault On execute +// <2> 1 FOW Fault On Write +// <1> 1 FOR Fault On Read +// <0> 1 V valid bit +// #define pte_v_pfn 32 #define pte_m_soft (0xFFFF0000) @@ -161,20 +154,16 @@ SOFTWARE. #define pte_m_v (0x0001) #define pte_v_v 0 -// _DEFEND PTE,_GBL,DEF -// .ENDM -//;+ -//; VA layout - symbol prefix VA_ -//; -//; Loc Size name function -//; ------ ------ ------- ----------------------------------- -//; <42:33> 10 SEG1 First seg table offset for mapping -//; <32:23> 10 SEG2 Second seg table offset for mapping -//; <22:13> 10 SEG3 Third seg table offset for mapping -//; <12:0> 13 OFFSET Byte within page -//;- -// .MACRO _VADEF,_GBL -// _DEFINI VA,_GBL +// +// VA layout - symbol prefix VA_ +// +// Loc Size name function +// ------ ------ ------- ----------------------------------- +// <42:33> 10 SEG1 First seg table offset for mapping +// <32:23> 10 SEG2 Second seg table offset for mapping +// <22:13> 10 SEG3 Third seg table offset for mapping +// <12:0> 13 OFFSET Byte within page +// #define va_m_offset (0x000000001FFF) #define va_v_offset 0 @@ -185,13 +174,9 @@ SOFTWARE. #define va_m_seg1 (0x7FE00000000) #define va_v_seg1 33 -// _DEFEND VA,_GBL,DEF -// .ENDM -//;+ -//; PRIVILEGED CONTEXT BLOCK (PCB) -//;- -// .MACRO _PCBDEF,_GBL -// _DEFINI PCB,_GBL +// +//PRIVILEGED CONTEXT BLOCK (PCB) +// #define pcb_q_ksp 0 #define pcb_q_esp 8 #define pcb_q_ssp 16 @@ -211,13 +196,9 @@ SOFTWARE. #define pcb_v_dat 63 #define pcb_v_pme 62 -// _DEFEND PCB,_GBL,DEF -// .ENDM -//;+ -//; SYSTEM CONTROL BLOCK (SCB) -//;- -// .MACRO _SCBDEF,_GBL -// _DEFINI SCB,_GBL +// +// SYSTEM CONTROL BLOCK (SCB) +// #define scb_v_fen (0x0010) #define scb_v_acv (0x0080) @@ -266,13 +247,9 @@ SOFTWARE. #define scb_v_procmchk (0x0670) #define scb_v_passive_rel (0x06F0) -// _DEFEND SCB,_GBL,DEF -// .ENDM -//;+ -//; Stack frame (FRM) -//;- -// .MACRO _FRMDEF,_GBL -// _DEFINI FRM,_GBL +// +// Stack frame (FRM) +// #define frm_v_r2 (0x0000) #define frm_v_r3 (0x0008) @@ -283,13 +260,9 @@ SOFTWARE. #define frm_v_pc (0x0030) #define frm_v_ps (0x0038) -// _DEFEND FRM,_GBL,DEF -// .ENDM -//;+ -//; Exeception summary register (EXS) -//;- -// .MACRO _EXSDEF,_GBL -// _DEFINI EXS,_GBL +// +// Exeception summary register (EXS) +// // exs_v_swc <0> ; Software completion // exs_v_inv <1> ; Ivalid operation // exs_v_dze <2> ; Div by zero @@ -313,13 +286,9 @@ SOFTWARE. #define exs_m_ine (1<<exs_v_ine) #define exs_m_iov (1<<exs_v_iov) -// _defend exs,_gbl,def -// .endm -//;+ -//; machine check error summary register (mces) -//;- -// .macro _mcesdef,_gbl -// _defini mces,_gbl +// +// machine check error summary register (mces) +// // mces_v_mchk <0> ; machine check in progress // mces_v_sce <1> ; system correctable error // mces_v_pce <2> ; processor correctable error @@ -337,9 +306,5 @@ SOFTWARE. #define mces_m_dpc (1<<mces_v_dpc) #define mces_m_dsc (1<<mces_v_dsc) #define mces_m_all ((1<<mces_v_mchk) | (1<<mces_v_sce) | (1<<mces_v_pce) | (1<<mces_v_dpc) | (1<<mces_v_dsc)) -// _defend mces,_gbl,def -// .endm - - #endif diff --git a/system/alpha/h/ev5_defs.h b/system/alpha/h/ev5_defs.h index fbbc58010..90119bdf5 100644 --- a/system/alpha/h/ev5_defs.h +++ b/system/alpha/h/ev5_defs.h @@ -1,55 +1,52 @@ /* -Copyright 1995 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ + * Copyright 1995 Hewlett-Packard Development Company, L.P. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ #ifndef EV5_DEFS_INCLUDED #define EV5_DEFS_INCLUDED 1 // adapted from the version emailed to lance..pb Nov/95 - -// ******************************************************************************************************************************** -// Created 25-JUL-1995 14:21:23 by VAX SDL V3.2-12 Source: 21-JUL-1995 11:03:08 EV5$:[EV5.DVT.SUP]EV5_DEFS.SDL;24 -// ******************************************************************************************************************************** - -// .MACRO $EV5DEF,..EQU=<=>,..COL=<:> -// EV5$K_REVISION'..equ'34 -// In the definitions below, registers are annotated with one of the following -// symbols: +// In the definitions below, registers are annotated with one of the +// following symbols: // -// RW - The register may be read and written +// RW - The register may be read and written // RO - The register may only be read // WO - The register may only be written // -// For RO and WO registers, all bits and fields within the register are also -// read-only or write-only. For RW registers, each bit or field within -// the register is annotated with one of the following: +// For RO and WO registers, all bits and fields within the register +// are also read-only or write-only. For RW registers, each bit or +// field within the register is annotated with one of the following: // // RW - The bit/field may be read and written // RO - The bit/field may be read; writes are ignored -// WO - The bit/field may be written; reads return an UNPREDICTABLE result. +// WO - The bit/field may be written; reads return an UNPREDICTABLE result // WZ - The bit/field may be written; reads return a 0 // WC - The bit/field may be read; writes cause state to clear -// RC - The bit/field may be read, which also causes state to clear; writes are ignored +// RC - The bit/field may be read, which also causes state to clear; +// writes are ignored // Architecturally-defined (SRM) registers for EVMS + #define pt0 320 #define pt1 321 #define pt2 322 diff --git a/system/alpha/h/ev5_impure.h b/system/alpha/h/ev5_impure.h index 6ec838a41..c9403c24d 100644 --- a/system/alpha/h/ev5_impure.h +++ b/system/alpha/h/ev5_impure.h @@ -1,59 +1,64 @@ /* -Copyright 1993 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ + * Copyright 1993 Hewlett-Packard Development Company, L.P. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ #ifndef EV5_IMPURE_INCLUDED #define EV5_IMPURE_INCLUDED -/* // This uses the Hudson file format from "impure.h" but with the fields from // the distrubuted palcode "ev5_impure.sdl" .. pboyle Nov/95 -//orig file: impure.sdl -//orig -//orig Abstract: PAL impure scratch area and logout area data structure definitions for -//orig Alpha firmware. -//orig -//orig -//orig module $pal_impure; -//orig -//orig Edit Date Who Description -//orig ---- --------- --- --------------------- -//orig 1 7-Jul-93 JEM Initial Entry -//orig 2 18-nov-93 JEM Add shadow bc_ctl and pmctr_ctl to impure area -//orig Delete mvptbr -//orig Calculate pal$logout from end of impure area -//orig 3 6-dec-93 JEM Add pmctr_ctl bitfield definitions -//orig 4 3-feb-94 JEM Remove f31,r31 from impure area; Remove bc_ctl, pmctr_ctl; -//orig add ic_perr_stat, pmctr, dc_perr_stat, sc_stat, sc_addr, sc_ctl, -//orig bc_tag_addr, ei_stat, ei_addr, fill_syn, ld_lock -//orig 5 19-feb-94 JEM add gpr constants, and add f31,r31 back in to be consistent with ev4 -//orig add cns$ipr_offset -//orig 6 18-apr-94 JEM Add shadow bc_ctl and pmctr_ctl to impure area again. -//orig 7 18-jul-94 JEM Add bc_config shadow. Add mchk$sys_base constant to mchk logout frame -//orig -//orig -//orig constant REVISION equals 7 prefix IMPURE$; // Revision number of this file +// file: impure.sdl +// +// PAL impure scratch area and logout area data structure definitions for +// Alpha firmware. +// +// +// module $pal_impure; +// +// Edit Date Who Description +// ---- --------- --- --------------------- +// 1 7-Jul-93 JEM Initial Entry +// 2 18-nov-93 JEM Add shadow bc_ctl and pmctr_ctl to impure area +// Delete mvptbr +// Calculate pal$logout from end of impure area +// 3 6-dec-93 JEM Add pmctr_ctl bitfield definitions +// 4 3-feb-94 JEM Remove f31,r31 from impure area; Remove bc_ctl, +// pmctr_ctl; add ic_perr_stat, pmctr, dc_perr_stat, +// sc_stat, sc_addr, sc_ctl, bc_tag_addr, ei_stat, +// ei_addr, fill_syn, ld_lock +// 5 19-feb-94 JEM add gpr constants, and add f31,r31 back in to be +// consistent with ev4 +// add cns$ipr_offset +// 6 18-apr-94 JEM Add shadow bc_ctl and pmctr_ctl to impure area again. +// 7 18-jul-94 JEM Add bc_config shadow. Add mchk$sys_base constant +// to mchk logout frame +// +// +// constant REVISION equals 7 prefix IMPURE$; // Revision number of this file //orig +/* ** Macros for saving/restoring data to/from the PAL impure scratch ** area. ** @@ -73,34 +78,6 @@ SOFTWARE. ** macros will auto-magically adjust the offsets accordingly. ** */ -#if 0 -#define SAVE_GPR(reg,offset,base) \ - stq_p reg, ((offset-0x200)&0x3FF)(base) - -#define RESTORE_GPR(reg,offset,base) \ - ldq_p reg, ((offset-0x200)&0x3FF)(base) - - -#define SAVE_FPR(reg,offset,base) \ - stt reg, ((offset-0x200)&0x3FF)(base) - -#define RESTORE_FPR(reg,offset,base) \ - ldt reg, ((offset-0x200)&0x3FF)(base) - -#define SAVE_IPR(reg,offset,base) \ - mfpr v0, reg; \ - stq_p v0, ((offset-CNS_Q_IPR)&0x3FF)(base) - -#define RESTORE_IPR(reg,offset,base) \ - ldq_p v0, ((offset-CNS_Q_IPR)&0x3FF)(base); \ - mtpr v0, reg - -#define SAVE_SHADOW(reg,offset,base) \ - stq_p reg, ((offset-CNS_Q_IPR)&0x3FF)(base) - -#define RESTORE_SHADOW(reg,offset,base)\ - ldq_p reg, ((offset-CNS_Q_IPR)&0x3FF)(base) -#else //#define SEXT10(X) (((X) & 0x200) ? ((X) | 0xfffffffffffffc00) : (X)) #define SEXT10(X) ((X) & 0x3ff) //#define SEXT10(X) (((X) << 55) >> 55) @@ -131,13 +108,13 @@ SOFTWARE. #define RESTORE_SHADOW(reg,offset,base)\ ldq_p reg, (SEXT10(offset-CNS_Q_IPR))(base) -#endif -/* orig Structure of the processor-specific impure area */ -/* orig aggregate impure struct prefix "" tag ""; - * orig cns$flag quadword; - * orig cns$hlt quadword; -*/ +/* Structure of the processor-specific impure area */ + +/* aggregate impure struct prefix "" tag ""; + * cns$flag quadword; + * cns$hlt quadword; + */ /* Define base for debug monitor compatibility */ #define CNS_Q_BASE 0x000 @@ -145,138 +122,140 @@ SOFTWARE. #define CNS_Q_HALT 0x108 -/* orig constant ( - * orig cns$r0,cns$r1,cns$r2,cns$r3,cns$r4,cns$r5,cns$r6,cns$r7, - * orig cns$r8,cns$r9,cns$r10,cns$r11,cns$r12,cns$r13,cns$r14,cns$r15, - * orig cns$r16,cns$r17,cns$r18,cns$r19,cns$r20,cns$r21,cns$r22,cns$r23, - * orig cns$r24,cns$r25,cns$r26,cns$r27,cns$r28,cns$r29,cns$r30,cns$r31 - * orig ) equals . increment 8 prefix "" tag ""; - * orig cns$gpr quadword dimension 32; -*/ +/* constant ( + * cns$r0,cns$r1,cns$r2,cns$r3,cns$r4,cns$r5,cns$r6,cns$r7, + * cns$r8,cns$r9,cns$r10,cns$r11,cns$r12,cns$r13,cns$r14,cns$r15, + * cns$r16,cns$r17,cns$r18,cns$r19,cns$r20,cns$r21,cns$r22,cns$r23, + * cns$r24,cns$r25,cns$r26,cns$r27,cns$r28,cns$r29,cns$r30,cns$r31 + * ) equals . increment 8 prefix "" tag ""; + * cns$gpr quadword dimension 32; + */ + /* Offset to base of saved GPR area - 32 quadword */ #define CNS_Q_GPR 0x110 #define cns_gpr CNS_Q_GPR -/* orig constant ( - * orig cns$f0,cns$f1,cns$f2,cns$f3,cns$f4,cns$f5,cns$f6,cns$f7, - * orig cns$f8,cns$f9,cns$f10,cns$f11,cns$f12,cns$f13,cns$f14,cns$f15, - * orig cns$f16,cns$f17,cns$f18,cns$f19,cns$f20,cns$f21,cns$f22,cns$f23, - * orig cns$f24,cns$f25,cns$f26,cns$f27,cns$f28,cns$f29,cns$f30,cns$f31 - * orig ) equals . increment 8 prefix "" tag ""; - * orig cns$fpr quadword dimension 32; -*/ +/* constant ( + * cns$f0,cns$f1,cns$f2,cns$f3,cns$f4,cns$f5,cns$f6,cns$f7, + * cns$f8,cns$f9,cns$f10,cns$f11,cns$f12,cns$f13,cns$f14,cns$f15, + * cns$f16,cns$f17,cns$f18,cns$f19,cns$f20,cns$f21,cns$f22,cns$f23, + * cns$f24,cns$f25,cns$f26,cns$f27,cns$f28,cns$f29,cns$f30,cns$f31 + * ) equals . increment 8 prefix "" tag ""; + * cns$fpr quadword dimension 32; + */ + /* Offset to base of saved FPR area - 32 quadwords */ #define CNS_Q_FPR 0x210 -/* orig #t=.; - * orig cns$mchkflag quadword; -*/ +/* #t=.; + * cns$mchkflag quadword; + */ #define CNS_Q_MCHK 0x310 -/* orig constant cns$pt_offset equals .; - * orig constant ( - * orig cns$pt0,cns$pt1,cns$pt2,cns$pt3,cns$pt4,cns$pt5,cns$pt6, - * orig cns$pt7,cns$pt8,cns$pt9,cns$pt10,cns$pt11,cns$pt12,cns$pt13, - * orig cns$pt14,cns$pt15,cns$pt16,cns$pt17,cns$pt18,cns$pt19,cns$pt20, - * orig cns$pt21,cns$pt22,cns$pt23 - * orig ) equals . increment 8 prefix "" tag ""; - * orig cns$pt quadword dimension 24; -*/ +/* constant cns$pt_offset equals .; + * constant ( + * cns$pt0,cns$pt1,cns$pt2,cns$pt3,cns$pt4,cns$pt5,cns$pt6, + * cns$pt7,cns$pt8,cns$pt9,cns$pt10,cns$pt11,cns$pt12,cns$pt13, + * cns$pt14,cns$pt15,cns$pt16,cns$pt17,cns$pt18,cns$pt19,cns$pt20, + * cns$pt21,cns$pt22,cns$pt23 + * ) equals . increment 8 prefix "" tag ""; + * cns$pt quadword dimension 24; + */ /* Offset to base of saved PALtemp area - 25 quadwords */ #define CNS_Q_PT 0x318 -/* orig cns$shadow8 quadword; - * orig cns$shadow9 quadword; - * orig cns$shadow10 quadword; - * orig cns$shadow11 quadword; - * orig cns$shadow12 quadword; - * orig cns$shadow13 quadword; - * orig cns$shadow14 quadword; - * orig cns$shadow25 quadword; -*/ +/* cns$shadow8 quadword; + * cns$shadow9 quadword; + * cns$shadow10 quadword; + * cns$shadow11 quadword; + * cns$shadow12 quadword; + * cns$shadow13 quadword; + * cns$shadow14 quadword; + * cns$shadow25 quadword; + */ /* Offset to base of saved PALshadow area - 8 quadwords */ #define CNS_Q_SHADOW 0x3D8 /* Offset to base of saved IPR area */ #define CNS_Q_IPR 0x418 -/* orig constant cns$ipr_offset equals .; */ -/* orig cns$exc_addr quadword; */ +/* constant cns$ipr_offset equals .; */ +/* cns$exc_addr quadword; */ #define CNS_Q_EXC_ADDR 0x418 -/* orig cns$pal_base quadword; */ +/* cns$pal_base quadword; */ #define CNS_Q_PAL_BASE 0x420 -/* orig cns$mm_stat quadword; */ +/* cns$mm_stat quadword; */ #define CNS_Q_MM_STAT 0x428 -/* orig cns$va quadword; */ +/* cns$va quadword; */ #define CNS_Q_VA 0x430 -/* orig cns$icsr quadword; */ +/* cns$icsr quadword; */ #define CNS_Q_ICSR 0x438 -/* orig cns$ipl quadword; */ +/* cns$ipl quadword; */ #define CNS_Q_IPL 0x440 -/* orig cns$ps quadword; // Ibox current mode */ +/* cns$ps quadword; // Ibox current mode */ #define CNS_Q_IPS 0x448 -/* orig cns$itb_asn quadword; */ +/* cns$itb_asn quadword; */ #define CNS_Q_ITB_ASN 0x450 -/* orig cns$aster quadword; */ +/* cns$aster quadword; */ #define CNS_Q_ASTER 0x458 -/* orig cns$astrr quadword; */ +/* cns$astrr quadword; */ #define CNS_Q_ASTRR 0x460 -/* orig cns$isr quadword; */ +/* cns$isr quadword; */ #define CNS_Q_ISR 0x468 -/* orig cns$ivptbr quadword; */ +/* cns$ivptbr quadword; */ #define CNS_Q_IVPTBR 0x470 -/* orig cns$mcsr quadword; */ +/* cns$mcsr quadword; */ #define CNS_Q_MCSR 0x478 -/* orig cns$dc_mode quadword; */ +/* cns$dc_mode quadword; */ #define CNS_Q_DC_MODE 0x480 -/* orig cns$maf_mode quadword; */ +/* cns$maf_mode quadword; */ #define CNS_Q_MAF_MODE 0x488 -/* orig cns$sirr quadword; */ +/* cns$sirr quadword; */ #define CNS_Q_SIRR 0x490 -/* orig cns$fpcsr quadword; */ +/* cns$fpcsr quadword; */ #define CNS_Q_FPCSR 0x498 -/* orig cns$icperr_stat quadword; */ +/* cns$icperr_stat quadword; */ #define CNS_Q_ICPERR_STAT 0x4A0 -/* orig cns$pmctr quadword; */ +/* cns$pmctr quadword; */ #define CNS_Q_PM_CTR 0x4A8 -/* orig cns$exc_sum quadword; */ +/* cns$exc_sum quadword; */ #define CNS_Q_EXC_SUM 0x4B0 -/* orig cns$exc_mask quadword; */ +/* cns$exc_mask quadword; */ #define CNS_Q_EXC_MASK 0x4B8 -/* orig cns$intid quadword; */ +/* cns$intid quadword; */ #define CNS_Q_INT_ID 0x4C0 -/* orig cns$dcperr_stat quadword; */ +/* cns$dcperr_stat quadword; */ #define CNS_Q_DCPERR_STAT 0x4C8 -/* orig cns$sc_stat quadword; */ +/* cns$sc_stat quadword; */ #define CNS_Q_SC_STAT 0x4D0 -/* orig cns$sc_addr quadword; */ +/* cns$sc_addr quadword; */ #define CNS_Q_SC_ADDR 0x4D8 -/* orig cns$sc_ctl quadword; */ +/* cns$sc_ctl quadword; */ #define CNS_Q_SC_CTL 0x4E0 -/* orig cns$bc_tag_addr quadword; */ +/* cns$bc_tag_addr quadword; */ #define CNS_Q_BC_TAG_ADDR 0x4E8 -/* orig cns$ei_stat quadword; */ +/* cns$ei_stat quadword; */ #define CNS_Q_EI_STAT 0x4F0 -/* orig cns$ei_addr quadword; */ +/* cns$ei_addr quadword; */ #define CNS_Q_EI_ADDR 0x4F8 -/* orig cns$fill_syn quadword; */ +/* cns$fill_syn quadword; */ #define CNS_Q_FILL_SYN 0x500 -/* orig cns$ld_lock quadword; */ +/* cns$ld_lock quadword; */ #define CNS_Q_LD_LOCK 0x508 -/* orig cns$bc_ctl quadword; // shadow of on chip bc_ctl */ +/* cns$bc_ctl quadword; // shadow of on chip bc_ctl */ #define CNS_Q_BC_CTL 0x510 -/* orig cns$pmctr_ctl quadword; // saved frequency select info for performance monitor counter */ +/* cns$pmctr_ctl quadword; // saved frequency select info for performance monitor counter */ #define CNS_Q_PM_CTL 0x518 -/* orig cns$bc_config quadword; // shadow of on chip bc_config */ +/* cns$bc_config quadword; // shadow of on chip bc_config */ #define CNS_Q_BC_CFG 0x520 -/* orig constant cns$size equals .; - * orig - * orig constant pal$impure_common_size equals (%x0200 +7) & %xfff8; - * orig constant pal$impure_specific_size equals (.+7) & %xfff8; - * orig constant cns$mchksize equals (.+7-#t) & %xfff8; - * orig constant pal$logout_area equals pal$impure_specific_size ; - * orig end impure; +/* constant cns$size equals .; + * + * constant pal$impure_common_size equals (%x0200 +7) & %xfff8; + * constant pal$impure_specific_size equals (.+7) & %xfff8; + * constant cns$mchksize equals (.+7-#t) & %xfff8; + * constant pal$logout_area equals pal$impure_specific_size ; + * end impure; */ /* This next set of stuff came from the old code ..pb */ @@ -295,56 +274,54 @@ SOFTWARE. -/* orig - * orig aggregate EV5PMCTRCTL_BITS structure fill prefix PMCTR_CTL$; - * orig SPROCESS bitfield length 1 ; - * orig FILL_0 bitfield length 3 fill tag $$; - * orig FRQ2 bitfield length 2 ; - * orig FRQ1 bitfield length 2 ; - * orig FRQ0 bitfield length 2 ; - * orig CTL2 bitfield length 2 ; - * orig CTL1 bitfield length 2 ; - * orig CTL0 bitfield length 2 ; - * orig FILL_1 bitfield length 16 fill tag $$; - * orig FILL_2 bitfield length 32 fill tag $$; - * orig end EV5PMCTRCTL_BITS; - * orig - * orig end_module $pal_impure; - * orig - * orig module $pal_logout; - * orig - * orig // - * orig // Start definition of Corrected Error Frame - * orig // +/* + * aggregate EV5PMCTRCTL_BITS structure fill prefix PMCTR_CTL$; + * SPROCESS bitfield length 1 ; + * FILL_0 bitfield length 3 fill tag $$; + * FRQ2 bitfield length 2 ; + * FRQ1 bitfield length 2 ; + * FRQ0 bitfield length 2 ; + * CTL2 bitfield length 2 ; + * CTL1 bitfield length 2 ; + * CTL0 bitfield length 2 ; + * FILL_1 bitfield length 16 fill tag $$; + * FILL_2 bitfield length 32 fill tag $$; + * end EV5PMCTRCTL_BITS; + * + * end_module $pal_impure; + * + * module $pal_logout; + * + * // + * // Start definition of Corrected Error Frame + * // */ /* - * orig aggregate crd_logout struct prefix "" tag ""; + * aggregate crd_logout struct prefix "" tag ""; */ -#ifdef SIMOS #define pal_logout_area 0x600 #define mchk_crd_base 0 -#endif -/* orig mchk$crd_flag quadword; */ +/* mchk$crd_flag quadword; */ #define mchk_crd_flag 0 -/* orig mchk$crd_offsets quadword; */ +/* mchk$crd_offsets quadword; */ #define mchk_crd_offsets 8 -/* orig - * orig // Pal-specific information */ +/* + * // Pal-specific information */ #define mchk_crd_mchk_code 0x10 -/* orig mchk$crd_mchk_code quadword; - * orig - * orig // CPU-specific information - * orig constant mchk$crd_cpu_base equals . ; - * orig mchk$crd_ei_addr quadword; */ +/* mchk$crd_mchk_code quadword; + * + * // CPU-specific information + * constant mchk$crd_cpu_base equals . ; + * mchk$crd_ei_addr quadword; */ #define mchk_crd_ei_addr 0x18 -/* orig mchk$crd_fill_syn quadword; */ +/* mchk$crd_fill_syn quadword; */ #define mchk_crd_fill_syn 0x20 -/* orig mchk$crd_ei_stat quadword; */ +/* mchk$crd_ei_stat quadword; */ #define mchk_crd_ei_stat 0x28 -/* orig mchk$crd_isr quadword; */ +/* mchk$crd_isr quadword; */ #define mchk_crd_isr 0x30 /* @@ -362,7 +339,6 @@ SOFTWARE. #define mchk_crd_rsvd 0x70 -#ifdef SIMOS /* * mchk area seems different for tlaser */ @@ -376,70 +352,65 @@ SOFTWARE. #define mchk_tlepmerr 0x18 -#endif - - -/* orig - * orig // System-specific information - * orig constant mchk$crd_sys_base equals . ; - * orig constant mchk$crd_size equals (.+7) & %xfff8; - * orig - * orig end crd_logout; - * orig // - * orig // Start definition of Machine check logout Frame - * orig // - * orig aggregate logout struct prefix "" tag ""; - * orig mchk$flag quadword; */ -/* orig mchk$offsets quadword; */ -/* orig - * orig // Pal-specific information - * orig mchk$mchk_code quadword; */ +/* + * // System-specific information + * constant mchk$crd_sys_base equals . ; + * constant mchk$crd_size equals (.+7) & %xfff8; + * + * end crd_logout; + * // + * // Start definition of Machine check logout Frame + * // + * aggregate logout struct prefix "" tag ""; + * mchk$flag quadword; */ +/* mchk$offsets quadword; */ +/* + * // Pal-specific information + * mchk$mchk_code quadword; */ /* - * orig mchk$pt quadword dimension 24; - * orig - * orig // CPU-specific information - * orig constant mchk$cpu_base equals . ; - * orig mchk$exc_addr quadword; - * orig mchk$exc_sum quadword; - * orig mchk$exc_mask quadword; - * orig mchk$pal_base quadword; - * orig mchk$isr quadword; - * orig mchk$icsr quadword; - * orig mchk$ic_perr_stat quadword; - * orig mchk$dc_perr_stat quadword; - * orig mchk$va quadword; - * orig mchk$mm_stat quadword; - * orig mchk$sc_addr quadword; - * orig mchk$sc_stat quadword; - * orig mchk$bc_tag_addr quadword; - * orig mchk$ei_addr quadword; - * orig mchk$fill_syn quadword; - * orig mchk$ei_stat quadword; - * orig mchk$ld_lock quadword; - * orig - * orig // System-specific information - * orig - * orig constant mchk$sys_base equals . ; - * orig mchk$sys_ipr1 quadword ; // Holder for system-specific stuff - * orig - * orig constant mchk$size equals (.+7) & %xfff8; - * orig - * orig - * orig constant mchk$crd_base equals 0 ; - * orig constant mchk$mchk_base equals mchk$crd_size ; - * orig - * orig - * orig end logout; - * orig - * orig end_module $pal_logout; + * mchk$pt quadword dimension 24; + * + * // CPU-specific information + * constant mchk$cpu_base equals . ; + * mchk$exc_addr quadword; + * mchk$exc_sum quadword; + * mchk$exc_mask quadword; + * mchk$pal_base quadword; + * mchk$isr quadword; + * mchk$icsr quadword; + * mchk$ic_perr_stat quadword; + * mchk$dc_perr_stat quadword; + * mchk$va quadword; + * mchk$mm_stat quadword; + * mchk$sc_addr quadword; + * mchk$sc_stat quadword; + * mchk$bc_tag_addr quadword; + * mchk$ei_addr quadword; + * mchk$fill_syn quadword; + * mchk$ei_stat quadword; + * mchk$ld_lock quadword; + * + * // System-specific information + * + * constant mchk$sys_base equals . ; + * mchk$sys_ipr1 quadword ; // Holder for system-specific stuff + * + * constant mchk$size equals (.+7) & %xfff8; + * + * + * constant mchk$crd_base equals 0 ; + * constant mchk$mchk_base equals mchk$crd_size ; + * + * + * end logout; + * + * end_module $pal_logout; */ - - - -/* this is lingering in the old ladbx code but looks like it was from ev4 days. - * This was 0x160 in the old days..pb -*/ +/* + * this is lingering in the old ladbx code but looks like it was from + * ev4 days. This was 0x160 in the old days..pb + */ #define LAF_K_SIZE MACHINE_CHECK_SIZE #endif diff --git a/system/alpha/h/ev5_osfalpha_defs.h b/system/alpha/h/ev5_osfalpha_defs.h index 6bc98de47..b16f119db 100644 --- a/system/alpha/h/ev5_osfalpha_defs.h +++ b/system/alpha/h/ev5_osfalpha_defs.h @@ -1,44 +1,40 @@ /* -Copyright 1993 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ + * Copyright 1993 Hewlett-Packard Development Company, L.P. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ #ifndef EV5_OSFALPHA_DEFS_INCLUDED #define EV5_OSFALPHA_DEFS_INCLUDED 1 - // from ev5_osfalpha_defs.mar from Lance's fetch directory // lowercaseified and $ changed to _ and reformatting for gas...pb Nov/95 -//orig .MACRO $OSF_ALPHADEFS -//orig OSF_ALPHADEF_VER == 5 ; Flag the version number of this file. -//orig .ENDM -//orig .MACRO $OSF_PSDEF,$GBL -//orig $DEFINI OSFPS,$GBL -//orig;+ -//orig; PS Layout - PS -//orig; Loc Size name function -//orig; ------ ------ ----- ----------------------------------- -//orig; <0:2> 3 IPL Prio level -//orig; <3> 1 CM Current Mode -//orig;- +// +// PS Layout - PS +// Loc Size name function +// ------ ------ ----- ----------------------------------- +// <0:2> 3 IPL Prio level +// <3> 1 CM Current Mode +// #define osfps_v_mode 3 #define osfps_m_mode (1<<osfps_v_mode) @@ -61,33 +57,27 @@ SOFTWARE. #define osfint_c_perf 4 #define osfint_c_passrel 5 -//orig _DEFEND OSFPS,_GBL,DEF -//orig .ENDM - -//orig;+ -//orig; PTE layout - symbol prefix osfpte_ -//orig; -//orig; Loc Size name function -//orig; ------ ------ ------ ----------------------------------- -//orig; <63:32> 32 PFN Page Frame Number -//orig; <31:16> 16 SOFT Bits reserved for software use -//orig; <15:14> 2 -//orig; <13> 1 UWE User write enable -//orig; <12> 1 KWE Kernel write enable -//orig; <11:10> 2 -//orig; <9> 1 URE User read enable -//orig; <8> 1 KRE Kernel read enable -//orig; <7:6> 2 RES Reserved SBZ -//orig; <5> 1 HPF Huge Page Flag -//orig; <4> 1 ASM Wild card address space number match -//orig; <3> 1 FOE Fault On execute -//orig; <2> 1 FOW Fault On Write -//orig; <1> 1 FOR Fault On Read -//orig; <0> 1 V valid bit -//orig;- - -//orig .MACRO _OSF_PTEDEF,_GBL -//orig _DEFINI OSFPTE,_GBL +// +// PTE layout - symbol prefix osfpte_ +// +// Loc Size name function +// ------ ------ ------ ----------------------------------- +// <63:32> 32 PFN Page Frame Number +// <31:16> 16 SOFT Bits reserved for software use +// <15:14> 2 +// <13> 1 UWE User write enable +// <12> 1 KWE Kernel write enable +// <11:10> 2 +// <9> 1 URE User read enable +// <8> 1 KRE Kernel read enable +// <7:6> 2 RES Reserved SBZ +// <5> 1 HPF Huge Page Flag +// <4> 1 ASM Wild card address space number match +// <3> 1 FOE Fault On execute +// <2> 1 FOW Fault On Write +// <1> 1 FOR Fault On Read +// <0> 1 V valid bit +// #define osfpte_v_pfn 32 #define osfpte_m_soft (0xFFFF0000) @@ -116,21 +106,16 @@ SOFTWARE. #define osfpte_m_ksegbits (osfpte_m_kre | osfpte_m_kwe | osfpte_m_v | osfpte_m_asm) #define osfpte_m_prot (osfpte_m_ure+osfpte_m_uwe | osfpte_m_kre | osfpte_m_kwe) -//orig _DEFEND OSFPTE,_GBL,DEF -//orig .ENDM - -//orig;+ -//orig; VA layout - symbol prefix VA_ -//orig; -//orig; Loc Size name function -//orig; ------ ------ ------- ----------------------------------- -//orig; <42:33> 10 SEG1 First seg table offset for mapping -//orig; <32:23> 10 SEG2 Second seg table offset for mapping -//orig; <22:13> 10 SEG3 Third seg table offset for mapping -//orig; <12:0> 13 OFFSET Byte within page -//orig;- -//orig .MACRO _OSF_VADEF,_GBL -//orig _DEFINI OSFVA,_GBL +// +// VA layout - symbol prefix VA_ +// +// Loc Size name function +// ------ ------ ------- ----------------------------------- +// <42:33> 10 SEG1 First seg table offset for mapping +// <32:23> 10 SEG2 Second seg table offset for mapping +// <22:13> 10 SEG3 Third seg table offset for mapping +// <12:0> 13 OFFSET Byte within page +// #define osfva_m_offset (0x000000001FFF) #define osfva_v_offset 0 @@ -141,14 +126,6 @@ SOFTWARE. #define osfva_m_seg1 (0x7FE00000000) #define osfva_v_seg1 33 -//orig _DEFEND OSFVA,_GBL,DEF -//orig .ENDM -//orig;+ -//orig; PRIVILEGED CONTEXT BLOCK (PCB) -//orig;- -//orig .MACRO _OSF_PCBDEF,_GBL -//orig _DEFINI OSFPCB,_GBL - #define osfpcb_q_ksp (0x0000) #define osfpcb_q_usp (0x0008) #define osfpcb_q_Usp (0x0008) @@ -160,14 +137,6 @@ SOFTWARE. #define osfpcb_q_fen (0x0028) #define osfpcb_v_pme 62 -//orig _DEFEND OSFPCB,_GBL,DEF -//orig .ENDM -//orig;+ -//orig; Stack Frame -//orig;- -//orig .MACRO _OSF_SFDEF,_GBL -//orig _DEFINI OSFSF,_GBL - #define osfsf_ps (0x00) #define osfsf_pc (0x08) #define osfsf_gp (0x10) @@ -176,7 +145,4 @@ SOFTWARE. #define osfsf_a2 (0x28) #define osfsf_c_size (0x30) -//orig _DEFEND OSFSF,_GBL,DEF -//orig .ENDM - #endif diff --git a/system/alpha/h/ev5_paldef.h b/system/alpha/h/ev5_paldef.h index d2262a44a..996e79131 100644 --- a/system/alpha/h/ev5_paldef.h +++ b/system/alpha/h/ev5_paldef.h @@ -1,24 +1,26 @@ /* -Copyright 1993 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ + * Copyright 1993 Hewlett-Packard Development Company, L.P. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ #ifndef EV5_PALDEF_INCLUDED #define EV5_PALDEF_INCLUDED 1 @@ -26,18 +28,12 @@ SOFTWARE. // from ev5_paldef.mar from Lance's fetch directory...pb Nov/95 // some entries have been superceeded by the more recent evt_defs.h -// These are lower-caseified and have the $ signs (unnecessarily we now discover) removed. +// These are lower-caseified and have the $ signs (unnecessarily we +// now discover) removed. // Note that at the bottom of this file is the version of ev5_defs.mar -// which is more recent than the top part of the file and contains overlapping information...pb Nov/95 - -// .MACRO PALDEFS -// PALDEF_VER == 1 ; Flag the version number of this file. -// .ENDM -// -// -// .MACRO _HALT_CODES,_GBL -// _DEFINI HALT_CODES,_GBL +// which is more recent than the top part of the file and contains +// overlapping information...pb Nov/95 #define hlt_c_reset 0 #define hlt_c_hw_halt 1 @@ -52,12 +48,6 @@ SOFTWARE. #define hlt_c_mpstart 34 #define hlt_c_lfu_start 35 -// halt codes above 255 reserved for platform specific errors -// _DEFEND HALT_CODES,_GBL,DEF -// .ENDM -// .MACRO _MCHK_CODES,_GBL -// _DEFINI MCHK_CODES,_GBL - #define mchk_c_tperr (64<<1) #define mchk_c_tcperr (65<<1) #define mchk_c_herr (66<<1) @@ -80,24 +70,12 @@ SOFTWARE. #define mchk_c_sys_hrd_error (257<<1) #define mchk_c_sys_ecc (258<<1) -// _DEFEND MCHK_CODES,_GBL,DEF -// .ENDM - -// .MACRO _EV5_MM,_GBL -// _DEFINI _EV5_MM,_GBL - #define page_seg_size_bits 10 #define page_offset_size_bits 13 #define page_size_bytes 8192 #define va_size_bits 43 #define pa_size_bits 45 -// _DEFEND _EV5_MM,_GBL,DEF -// .ENDM - -// .MACRO _PALTEMP,_GBL -// _DEFINI _PALTEMP,_GBL - // replaced by ev5_defs.h #define pt0 (0x140) // replaced by ev5_defs.h #define pt1 (0x141) // replaced by ev5_defs.h #define pt2 (0x142) @@ -153,55 +131,28 @@ SOFTWARE. #define pt_misc_v_switch 48 #define pt_misc_v_cm 56 -// _DEFEND _PALTEMP,_GBL,DEF -// .ENDM - -// .MACRO _OSF_MMCSR_DEF,_GBL -// _DEFINI OSFMMCSR,_GBL - #define mmcsr_c_tnv 0 #define mmcsr_c_acv 1 #define mmcsr_c_for 2 #define mmcsr_c_foe 3 #define mmcsr_c_fow 4 -// _DEFEND OSFMMCSR,_GBL,DEF -// .ENDM - -// .MACRO _MM_STAT_DEF,_GBL -// _DEFINI MMSTATDEF,_GBL - #define mm_stat_m_opcode (0x3F) #define mm_stat_m_ra (0x1F) #define evx_opc_sync (0x18) #define EVX_OPC_SYNC (0x18) #define evx_opc_hw_ld (0x1B) -// _DEFEND MMSTATDEF,_GBL,DEF -// .ENDM - -// .MACRO _OSF_A0_DEF,_GBL -// _DEFINI OSFA0DEF,_GBL - #define osf_a0_bpt (0x0) #define osf_a0_bugchk (0x1) #define osf_a0_gentrap (0x2) #define osf_a0_fen (0x3) #define osf_a0_opdec (0x4) -// _DEFEND OSFA0DEF,_GBL,DEF -// .ENDM - -// .MACRO _EV5_IPLDEF,_GBL -// _DEFINI EV5_IPLDEF,_GBL - #define ipl_machine_check 31 #define ipl_powerfail 30 #define ipl_perf_count 29 #define ipl_clock 22 #define ipl_interprocessor 22 -// _DEFEND EV5_IPLDEF,_GBL,DEF -// .ENDM - #endif diff --git a/system/alpha/h/fromHudsonMacros.h b/system/alpha/h/fromHudsonMacros.h index e6c219edb..c1fc0dfa0 100644 --- a/system/alpha/h/fromHudsonMacros.h +++ b/system/alpha/h/fromHudsonMacros.h @@ -1,81 +1,30 @@ /* -Copyright 1993, 1994 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ + * Copyright 1993, 1994 Hewlett-Packard Development Company, L.P. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ #ifndef HUDSON_MACROS_LOADED #define HUDSON_MACROS_LOADED 1 -/* - * VID: [T1.2] PT: [Fri Apr 21 16:47:16 1995] SF: [macros.h] - * TI: [/sae_users/cruz/bin/vice -iplatform.s -l// -p# -DEB164 -h -m -aeb164 ] - */ -/* -** -** FACILITY: -** -** DECchip 21164 PALcode -** -** MODULE: -** -** macros.h -** -** MODULE DESCRIPTION: -** -** DECchip 21164 PALcode macro definitions -** -** AUTHOR: ER -** -** CREATION DATE: 29-Nov-1993 -** -** $Id: fromHudsonMacros.h,v 1.1.1.1 1997/10/30 23:27:19 verghese Exp $ -** -** MODIFICATION HISTORY: -** -** $Log: fromHudsonMacros.h,v $ -** Revision 1.1.1.1 1997/10/30 23:27:19 verghese -** current 10/29/97 -** -** Revision 1.1 1995/11/18 01:46:23 boyle -** Initial revision -** -** Revision 1.5 1994/07/08 17:03:12 samberg -** Changes to support platform specific additions -** -** Revision 1.4 1994/05/20 19:24:19 ericr -** Moved STALL macro from osfpal.s to here -** Added LDLI macro -** -** Revision 1.3 1994/05/20 18:08:14 ericr -** Changed line comments to C++ style comment character -** -** Revision 1.2 1994/02/28 18:45:51 ericr -** Fixed EGORE related bugs -** -** Revision 1.1 1993/12/16 21:55:05 eric -** Initial revision -** -** -**-- -*/ - #define STALL \ mfpr r31, pt0 @@ -132,6 +81,4 @@ SOFTWARE. ldah reg, ((val+0x8000) >> 16)(zero); \ lda reg, (val&0xffff)(reg) - - #endif diff --git a/system/alpha/h/fromHudsonOsf.h b/system/alpha/h/fromHudsonOsf.h index 647b1e980..b67183860 100644 --- a/system/alpha/h/fromHudsonOsf.h +++ b/system/alpha/h/fromHudsonOsf.h @@ -1,98 +1,31 @@ /* -Copyright 1993, 1994 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ + * Copyright 1993, 1994 Hewlett-Packard Development Company, L.P. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ #ifndef FROMHUDSONOSF_INCLUDED #define FROMHUDSONOSF_INCLUDED 1 -/* - * VID: [T1.2] PT: [Fri Apr 21 16:47:14 1995] SF: [osf.h] - * TI: [/sae_users/cruz/bin/vice -iplatform.s -l// -p# -DEB164 -h -m -aeb164 ] - */ -#define __OSF_LOADED 1 -/* -** -** FACILITY: -** -** DECchip 21164 PALcode -** -** MODULE: -** -** osf.h -** -** MODULE DESCRIPTION: -** -** OSF/1 specific definitions -** -** AUTHOR: ER -** -** CREATION DATE: 24-Nov-1993 -** -** $Id: fromHudsonOsf.h,v 1.1.1.1 1997/10/30 23:27:19 verghese Exp $ -** -** MODIFICATION HISTORY: -** -** $Log: fromHudsonOsf.h,v $ -** Revision 1.1.1.1 1997/10/30 23:27:19 verghese -** current 10/29/97 -** -** Revision 1.1 1995/11/18 01:46:31 boyle -** Initial revision -** -** Revision 1.11 1995/04/21 02:06:30 fdh -** Replaced C++ style comments with Standard C style comments. -** -** Revision 1.10 1994/09/26 14:17:47 samberg -** Complete VICE work and EB164/SD164 breakout. -** -** Revision 1.9 1994/07/26 17:39:10 samberg -** Changes for SD164. -** -** Revision 1.8 1994/07/08 17:03:48 samberg -** Changes to support platform specific additions -** -** Revision 1.7 1994/05/20 19:23:51 ericr -** Moved STACK_FRAME macro from osfpal.s to here -** -** Revision 1.6 1994/05/20 18:08:19 ericr -** Changed line comments to C++ style comment character -** -** Revision 1.5 1994/01/11 18:43:33 ericr -** Removed PAL version/revision and size constants -** -** Revision 1.4 1994/01/05 16:22:32 ericr -** Added more SCB vector offsets and MCHK error code -** -** Revision 1.3 1994/01/03 19:35:40 ericr -** Derive mask definitions from field constants -** -** Revision 1.2 1993/12/22 20:43:01 eric -** Added mask definitions for MCES bits -** -** Revision 1.1 1993/12/16 21:55:05 eric -** Initial revision -** -** -**-- -*/ +#define __OSF_LOADED 1 /* ** Seg0 and Seg1 Virtual Address (VA) Format ** diff --git a/system/alpha/h/lib.h b/system/alpha/h/lib.h deleted file mode 100644 index 2b4837237..000000000 --- a/system/alpha/h/lib.h +++ /dev/null @@ -1,517 +0,0 @@ -/* -Copyright 1993, 1994Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - - -#ifndef __LIB_H_LOADED -#define __LIB_H_LOADED - -/* - * $Id: lib.h,v 1.1.1.1 1997/10/30 23:27:16 verghese Exp $; - */ - -/* - * $Log: lib.h,v $ - * Revision 1.1.1.1 1997/10/30 23:27:16 verghese - * current 10/29/97 - * - * Revision 1.1 1995/06/23 00:18:57 berc - * Initial revision - * - * Revision 1.29 1995/04/05 21:46:10 cruz - * Added EB164 prototype for wr_bcache(). - * - * Revision 1.28 1995/04/03 18:35:32 cruz - * Extended the prototype definition of cserv. - * - * Revision 1.27 1995/03/05 04:17:23 fdh - * Corrected prototype for inrom(). - * - * Revision 1.26 1995/02/28 03:05:53 fdh - * Moved rom.c prototypes to rom.h - * - * Revision 1.25 1995/02/27 19:21:27 fdh - * Added prototypes for Ctype routines. - * - * Revision 1.24 1995/02/23 21:48:31 fdh - * Added prototypes for set_haxr() and atoi(). - * - * Revision 1.23 1995/02/22 22:01:10 fdh - * Changed types for tolower() and toupper(). - * - * Revision 1.22 1995/02/19 17:46:01 fdh - * Changed one of the arguments to read_rom(). - * - * Revision 1.21 1995/02/10 02:23:20 fdh - * Added prototype for set_romboot(). - * - * Revision 1.20 1994/11/19 03:30:51 fdh - * Added support for romlist command. - * - * Revision 1.19 1994/11/18 19:05:31 fdh - * swpipl returns the current ipl. - * - * Revision 1.18 1994/11/08 21:39:20 fdh - * Added declaration for the flash routine. - * - * Revision 1.17 1994/11/01 11:30:01 rusling - * Changed following PCI-PCI bridge support. - * - * Revision 1.16 1994/08/05 20:13:47 fdh - * Updated Copyright header and RCS $Id: identifier. - * - * Revision 1.15 1994/08/03 19:44:23 fdh - * Fixups around the linker defined symbols _edata and _end. - * Protect time_t definition with #ifndef _TIME_T. - * - * Revision 1.14 1994/07/22 21:02:46 fdh - * Added extern void rtcBaseInit(void); for EB64 builds. - * - * Revision 1.13 1994/07/21 18:10:06 fdh - * >> Added EnableBCache(), DisableBCache(), and CleanBCache(). - * - * Revision 1.12 1994/07/13 14:17:07 fdh - * Added data structure for holding pointers to SROM interface - * parameters. - * - * Revision 1.11 1994/06/28 20:08:21 fdh - * Modified filenames and build precedure to fit into a FAT filesystem. - * - * Revision 1.10 1994/06/22 15:10:34 rusling - * Fixed up WNT compile warnings. - * - * Revision 1.9 1994/06/21 15:27:47 rusling - * Removed putFloat() prototype. - * - * Revision 1.8 1994/06/21 14:18:05 rusling - * changed definition of loadHeader() in rom.c - * - * Revision 1.7 1994/06/21 10:38:53 rusling - * Added strncmp() for WNT. - * - * Revision 1.5 1994/06/20 14:18:59 fdh - * Fixup header file preprocessor #include conditionals. - * - * Revision 1.4 1994/06/17 19:34:01 fdh - * Clean-up... - * - * Revision 1.3 1994/06/13 15:54:35 fdh - * Added definitions of unsigned amounts as defined in system.h - * Definitions are also placed here to make the lib subdirectory - * free-standing from the rest of the source tree. - * - * Revision 1.2 1994/06/03 20:18:38 fdh - * Added protypes for all routines in /lib. - * - * Revision 1.1 1994/01/19 10:33:21 rusling - * Initial revision - * - * Revision 1.1 1993/06/08 19:56:14 fdh - * Initial revision - * - */ - -#include <stddef.h> - -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif - -/* - * Definitions of unsigned amounts - */ -#define ub unsigned char -#define uw unsigned short int - -#ifdef _WIN32 -#define ul unsigned __int64 -#define sl __int64 -#define ui unsigned int -#else -#define ul unsigned long -#define sl long -#define ui unsigned int -#endif - -typedef struct { - ul *abox_ctl; -#ifdef DC21064 - ul *biu_ctl; -#endif /* DC21064 */ -#ifdef DC21066 - ui *bcr0; - ui *bcr1; - ui *bcr2; - ui *bcr3; - ui *bmr0; - ui *bmr1; - ui *bmr2; - ui *bmr3; -#endif /* DC21066 */ - ul *srom_rev; - ul *proc_id; - ul *mem_size; - ul *cycle_cnt; - ul *signature; - ul *proc_mask; - ul *sysctx; - int valid; -} sysdata_t; - -#ifdef _WIN32 -extern ul end; -extern ul edata; -#define _END end -#define _EDATA edata -#else -extern ul _end; -extern ul _edata; -#define _END _end -#define _EDATA _edata -#endif - -#ifndef _TIME_T -#define _TIME_T -typedef int time_t; -/* typedef ui time_t; */ -#endif - -/*:::::::::::::: -rw.c -::::::::::::::*/ -/* Here B = 8 bits, W = 16 bits, L = 32 bits, Q = 64 bits */ -extern ub ReadB(ub * adr); -extern uw ReadW(uw * adr); -extern void WriteB(ub * adr , ub data); -extern void WriteW(uw * adr , uw data); - -/*:::::::::::::: -beep.c -::::::::::::::*/ -extern void tone(int period , int time); -extern void dummy(int x); -extern void Beep(int msec , int freq); -extern void msleep(int ms); - -/*:::::::::::::: -c8514.c -::::::::::::::*/ -extern int c8514init(void); -extern void c8514erase(void); -extern void c8514putc(char c); -extern void c8514show(void); -extern void c8514hide(void); -extern void c8514insfontchar(int code , ub * s); -extern void initfont(void); - -/*:::::::::::::: -date.c -::::::::::::::*/ -extern void printDate(void); -extern void setDate(ub * date); -extern ui gettime(void); -//extern time_t time(void); -extern void CheckDate(void); - -/*:::::::::::::: -initdata.c -::::::::::::::*/ -extern void doinitdata(void ); - -/*:::::::::::::: -ebxx_io.c -::::::::::::::*/ -extern void outportb(ul p , ui d); -extern void outportw(ul p , ui d); -extern void outportt(ul p , ui d); -extern void outportl(ul p , ui d); -extern void outportbxt(ul p , ui d); -extern void outport(ul p , ui d); -extern void outcfgb(ui bus, ui dev, ui reg, ui data); -extern void outcfgw(ui bus, ui dev, ui reg, ui data); -extern void outcfgl(ui bus, ui dev, ui reg, ui data); -extern void outmembxt(ul p , ui d); -extern void outmemwat(ul p , ui d); -extern ui inportb(ul p); -extern ui inportw(ul p); -extern ui inportt(ul p); -extern ui inportl(ul p); -extern ui inportwat(ul p); -extern ui inportbxt(ul p); -extern ui inport(ul p); -extern ui incfgb(ui bus, ui dev, ui reg); -extern ui incfgw(ui bus, ui dev, ui reg); -extern ui incfgl(ui bus, ui dev, ui reg); -extern ui inmembat(ul p); -extern ui inmembxt(ul p); -extern void IOBusInit(void); -extern ul IOPCIClearNODEV(void); -extern void outLed(ui d); -extern void out_ioc_csr(ui p , ul d); -extern ul in_ioc_csr(ui p); -extern void outmemb(ul p , ui d); -extern void outmemw(ul p , ui d); -extern void outmemt(ul p , ui d); -extern void outmeml(ul p , ui d); -extern void outmem(ul p , ui d); -extern ui inmemb(ul p); -extern ui inmemw(ul p); -extern ui inmemt(ul p); -extern ul inmeml(ul p); -extern ui inmemwat(ul p); -extern ui inmem(ul p); -extern void set_haxr(unsigned int addr); -extern void outVti(ul p , ui d); -extern ui inVti(ul p); -extern ub inrom(ul p); -extern ui insctl(void); -extern void outsctl(ui d); -extern ui inIack(void); -#ifdef EB64 -extern void rtcBaseInit(void); -#endif - -/*:::::::::::::: -ebxx_mem.c -::::::::::::::*/ -extern void memdetect(void); -extern int check_mem_esr(int silent); -#ifdef EB66 -extern void out_mem_csr(ul p , ul d); -extern ul in_mem_csr(ui p); -#elif EB64P -extern void out_mem_csr(ui p , ui d); -extern ui in_mem_csr(ui p); -#endif - -extern void EnableBCache(void); -extern void DisableBCache(void); - -#ifdef EB164 -void wr_bcache (ui argc, ul arg1, ul arg2, ui select); -#endif - -/*:::::::::::::: -ffcsubs.c -::::::::::::::*/ -extern size_t strlen(const char *s); -#if 0 -extern void bzero(void *s, int count); -extern void bcopy(void *from, void *to, int count); -#endif -extern int tolower(int c); -extern int toupper(int c); -extern int IsAlpha(char c); -extern int IsDigit(char c); - -/*:::::::::::::: -fftty.c -::::::::::::::*/ -extern void UnGetChar(char c); -extern char MonGetChar(void); -extern void FlushLine(void); -extern ul ReadHex(void); -extern void ReadString(char * s); -extern char RawMonGetChar(void); -extern int kbdcontinue(void ); - -/*:::::::::::::: -floppy.c -::::::::::::::*/ -extern int floppyRead(int loadtype , char * file2load); - -/*:::::::::::::: -gpchar.c -::::::::::::::*/ -extern void PutChar(char c); -extern char GetChar(void); -extern int CharAv(void); -extern void WaitUs(int usecs); - -/*:::::::::::::: -ident.c -::::::::::::::*/ -extern int ident(ul first , ul last); - -/*:::::::::::::: -int.c -::::::::::::::*/ -extern void intr_enable(int int_level); - -/*:::::::::::::: -kbd.c -::::::::::::::*/ -extern void kbd_error(char * error_msg , int s1); -extern int kbd_init(void); -extern void kbd_reset_state(void); -extern int kbd_charav(void); -extern int kbd_getc(void); - -/*:::::::::::::: -leds.c -::::::::::::::*/ -extern void sethdled(int v); -extern int isturbo(void); -extern int kbd_locked(void); - -/*:::::::::::::: -memtest.c -::::::::::::::*/ -extern ul do_memtest(char * llim , char * hlim , int inc); -extern void memtest1(char * llim , char * hlim , int inc , int pattern); -extern void memtest2(char * llim , char * hlim , int inc , int seed); -extern void memtest3(char * llim , char * hlim , int inc); -extern void memtest(char * min , char * max , int inc); - -/*:::::::::::::: -p8514.c -::::::::::::::*/ -extern void pwgaFillSolid(ui fg , ui alu , ui planemask , int xDst , int yDst , int wDst , int hDst); -extern void pwgaDrawColorImage(int xDst , int yDst , int wDst , int hDst , ub * pSrc , int widthSrc , ui alu , ui planemask); -extern void pwgaBlit(int xSrc , int ySrc , int wSrc , int hSrc , int xDst , int yDst , ui alu , ui planemask); -extern int DisplayOpen(int mode1024); -extern void DisplayClose(void); -extern void byteoutport(int p , int d); -extern void short_delay(void); -extern void InitLUT(void); -extern int pwgaExists(void); -extern ui pwgaHWInit(int mode1024); -extern void outwords(short * wSrc , int wcount); -extern void outwblock(ub * pSrc , int w , int h , int widthSrc); - -/*:::::::::::::: -pr.c -::::::::::::::*/ -extern void PQ(ul x); -extern void PL(ui x); -extern void PW(uw x); -extern void PB(ub x); -extern void PutSpace(void); -extern void PutCR(void); - -/*:::::::::::::: -printf.c -::::::::::::::*/ -extern void PutString(const char * s); -extern int printf(const char *f, ...); - -/*:::::::::::::: -search.c -::::::::::::::*/ -extern int search(ul first , ul last , int size , char * valstr , int inverse); -extern void ParseVal(char * s , ul * val , ul * mask , int size); - -/*:::::::::::::: -sniff.c -::::::::::::::*/ -extern int find_first(int map); -extern int sniff_eisa(int id , int mask , int num_slots); - -/*:::::::::::::: -uart.c -::::::::::::::*/ -extern int uart_charav(int port); -extern char uart_getchar(int port); -extern void uart_putchar(int port , char c); -extern void putcLpt(int c); -extern void uart_init_line(int line , int baud); -extern int uart_init(void); - -/*:::::::::::::: -vga.c -::::::::::::::*/ -extern void vgaerase(void); -extern void vgalcgen(void); -extern void vgasetloc(void); -extern void vgaputc(register int c); -extern void vgastl(ul a , int d); -extern int vgaldl(ul a); -extern ub readreg(ui sel , ui off); -extern void writereg(ui sel , ui off , ub dat); -extern void dumpvga(void); -extern void vgainit(void); - -/*:::::::::::::: -libc.c -::::::::::::::*/ -extern int memcmp(const void * pcs , const void * pct , size_t n); -extern void * memset(void * ps , char c , size_t n); -extern void * memmove(void * ps , const void * pct , size_t n); -extern void * memcpy(void * ps , const void * pct , size_t n); -extern int atoi(const char *nptr); -extern int isalnum(int c); -extern int isalpha(int c); -extern int isascii(int c); -extern int iscntrl(int c); -extern int isdigit(int c); -extern int isgraph(int c); -extern int islower(int c); -extern int isprint(int c); -extern int ispunct(int c); -extern int isspace(int c); -extern int isupper(int c); -extern int isxdigit(int c); - -/*:::::::::::::: -flash.c -::::::::::::::*/ -extern int flash_main(ui src , ui segnum, ui segcnt); -/*:::::::::::::: -asmstuff.s -::::::::::::::*/ -extern void mb(void); -extern ul GetSP(void); -extern ul cServe(ul, ul, ul, ...); -extern void wrfen(ui); -extern void swppal(ul, ul, ul, ul); -extern void halt(void); -extern void wait_cycles(ui cycles); -extern int swpipl(ui); -extern void CleanBCache(ul); -/* Here B = 8 bits, W = 16 bits, L = 32 bits, Q = 64 bits */ -#ifdef _WIN32 -extern ui ReadL(ul); -extern void WriteL(ul, ui); -extern ul ReadQ(ul); -extern void WriteQ(ul, ul); -#else -#define WriteL(address,value) (*(ui *)(address)=(ui)(value)) -#define ReadL(address) (*(ui *)(address)) -#define WriteQ(address,value) (*(ul *)(address)=(ul)(value)) -#define ReadQ(address) (*(ul *)(address)) -#endif - -/*:::::::::::::::: -host specific library definitions -::::::::::::::::*/ -#ifdef _WIN32 -extern int strcmp(char *cs, char *ct); -extern char *strcpy(char *s, char *ct); -extern int strncmp(char *cs, char *ct, int n); -extern char *strncpy(char *s, char *ct, int n); -extern int rand(void); -#endif - -#endif /* __LIB_H_LOADED */ diff --git a/system/alpha/h/platform.h b/system/alpha/h/platform.h deleted file mode 100644 index 368152e3f..000000000 --- a/system/alpha/h/platform.h +++ /dev/null @@ -1,244 +0,0 @@ -/* -Copyright 1993, 1994 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - - -/* - * VID: [T1.2] PT: [Fri Apr 21 16:47:18 1995] SF: [platform.h] - * TI: [/sae_users/cruz/bin/vice -iplatform.s -l// -p# -DEB164 -h -m -aeb164 ] - */ -#define __PLATFORM_LOADED 1 -/* -** -** FACILITY: -** -** DECchip 21164 OSF/1 PALcode -** -** MODULE: -** -** platform.h -** -** MODULE DESCRIPTION: -** -** Platform specific definitions. -** -** AUTHOR: Lance Berc (taken from EB164 code) -** -** CREATION DATE: 14-Jun-1995 -** -** $Id: platform.h,v 1.1.1.1 1997/10/30 23:27:20 verghese Exp $ -** -** MODIFICATION HISTORY: -** -** $Log: platform.h,v $ -** Revision 1.1.1.1 1997/10/30 23:27:20 verghese -** current 10/29/97 -** - * Revision 1.1 1995/06/14 18:50:42 berc - * Initial revision - * -*/ - -#if !defined(CONSOLE_ENTRY) -#define CONSOLE_ENTRY 0x10000 -#endif /* CONSOLE_ENTRY */ - -#define DEBUGDEATH(c) \ - lda a0, c(zero) ; \ - br DebugDeath - -#define DEBUGSTORE(c) \ - stq_p t0,0(zero) ; \ - stq_p t1,8(zero) ; \ - lda t0, 0x400(zero) ; \ - sll t0, 29, t0 ; \ - ldah t0, 0x280(t0) ; \ -9: lda t1, 0x140(t0) ; \ - ldl_p t1, 0(t1) ; \ - srl t1, 16, t1 ; \ - and t1, 0x20, t1 ; \ - beq t1, 9b ; \ - lda t1, c(zero) ; \ - stl_p t1, 0(t0) ; \ - mb ; \ - ldq_p t1, 8(zero) ; \ - ldq_p t0, 0(zero) - - -/* -** IPL translation table definitions: -** -** EB164 specific IRQ pins are -** -** Line IPL Source OSF/1 IPL -** ---- --- ------ --------- -** IRQ0 20 Corrected ECC error 7 -** IRQ1 21 PCI/ISA 3 -** IRQ2 22 Real Time Clock 5 -** IRQ3 23 SIO NMI, CIA errors 7 -** -** The mask contains one byte for each IPL level, with IPL0 in the -** least significant (right-most) byte and IPL7 in the most -** significant (left-most) byte. Each byte in the mask maps the -** OSF/1 IPL to the DC21164 IPL. -** -** OSF/1 IPL IPL -** --------- --- -** 0 0 -** 1 1 -** 2 2 -** 3 21 (to account for PCI/ISA at IPL 21) -** 4 21 -** 5 22 (to account for clock at IPL 21) -** 6 30 (to account for powerfail) -** 7 31 -*/ - -#define INT_K_MASK_HIGH 0x1F1E1615 -#define INT_K_MASK_LOW 0x15020100 - -#define BYTE_ENABLE_SHIFT 5 - -/* -** Dallas DS1287A Real-Time Clock (RTC) Definitions: -*/ -#define RTCADD 0x160000 -#define RTCDAT 0x170000 - - -/* -** Serial Port (COM) Definitions: -*/ - -#define DLA_K_BRG 12 /* Baud Rate Divisor = 9600 */ - -#define LSR_V_THRE 5 /* Xmit Holding Register Empty Bit */ - -#define LCR_M_WLS 3 /* Word Length Select Mask */ -#define LCR_M_STB 4 /* Number Of Stop Bits Mask */ -#define LCR_M_PEN 8 /* Parity Enable Mask */ -#define LCR_M_DLAB 128 /* Divisor Latch Access Bit Mask */ - -#define LCR_K_INIT (LCR_M_WLS | LCR_M_STB) - -#define MCR_M_DTR 1 /* Data Terminal Ready Mask */ -#define MCR_M_RTS 2 /* Request To Send Mask */ -#define MCR_M_OUT1 4 /* Output 1 Control Mask */ -#define MCR_M_OUT2 8 /* UART Interrupt Mask Enable */ - -#define MCR_K_INIT (MCR_M_DTR | \ - MCR_M_RTS | \ - MCR_M_OUT1 | \ - MCR_M_OUT2) - -/* CPU Adr[39:29]=0x500 select PCI Mem. */ -#define PCI_MEM 0x400 -#define SLOT_D_COM1 (0x140000) -#define SLOT_D_COM2 (0x150000) - -#define COM1_RBR (SLOT_D_COM1 | (0x0 << 1)) /* Receive Buffer Register Offset */ -#define COM1_THR (SLOT_D_COM1 | (0x0 << 1)) /* Xmit Holding Register Offset */ -#define COM1_IER (SLOT_D_COM1 | (0x1 << 1)) /* Interrupt Enable Register Offset */ -#define COM1_IIR (SLOT_D_COM1 | (0x2 << 1)) /* Interrupt ID Register Offset */ -#define COM1_LCR (SLOT_D_COM1 | (0x3 << 1)) /* Line Control Register Offset */ -#define COM1_MCR (SLOT_D_COM1 | (0x4 << 1)) /* Modem Control Register Offset */ -#define COM1_LSR (SLOT_D_COM1 | (0x5 << 1)) /* Line Status Register Offset */ -#define COM1_MSR (SLOT_D_COM1 | (0x6 << 1)) /* Modem Status Register Offset */ -#define COM1_SCR (SLOT_D_COM1 | (0x7 << 1)) /* Scratch Register Offset */ -#define COM1_DLL (SLOT_D_COM1 | (0x8 << 1)) /* Divisor Latch (LS) Offset */ -#define COM1_DLH (SLOT_D_COM1 | (0x9 << 1)) /* Divisor Latch (MS) Offset */ - -#define COM2_RBR (SLOT_D_COM2 | (0x0 << 1)) -#define COM2_THR (SLOT_D_COM2 | (0x0 << 1)) -#define COM2_IER (SLOT_D_COM2 | (0x1 << 1)) -#define COM2_IIR (SLOT_D_COM2 | (0x2 << 1)) -#define COM2_LCR (SLOT_D_COM2 | (0x3 << 1)) -#define COM2_MCR (SLOT_D_COM2 | (0x4 << 1)) -#define COM2_LSR (SLOT_D_COM2 | (0x5 << 1)) -#define COM2_MSR (SLOT_D_COM2 | (0x6 << 1)) -#define COM2_SCR (SLOT_D_COM2 | (0x7 << 1)) -#define COM2_DLL (SLOT_D_COM2 | (0x8 << 1)) -#define COM2_DLH (SLOT_D_COM2 | (0x9 << 1)) - - -/* -** Macro to define a port address -*/ -#define IO_MASK 0x7FFFFFF - -/* NOTE ON ADDITIONAL PORT DEFINITION: -** -** We also need to set bit 39! Since the span between bit 39 -** and the byte enable field is more than 32, we set bit 39 in the -** port macros. -*/ - -/* -** Macro to write a byte literal to a specified port -*/ -#define OutPortByte(port,val,tmp0,tmp1) \ - LDLI (tmp0, port); \ - sll tmp0, BYTE_ENABLE_SHIFT, tmp0; \ - lda tmp1, PCI_MEM(zero); \ - sll tmp1, 29, tmp1; \ - bis tmp0, tmp1, tmp0; \ - lda tmp1, (val)(zero); \ - sll tmp1, 8*(port & 3), tmp1; \ - stl_p tmp1, 0x00(tmp0); \ - mb - -/* -** Macro to write a byte from a register to a specified port -*/ -#define OutPortByteReg(port,reg,tmp0,tmp1) \ - LDLI (tmp0, port); \ - sll tmp0, BYTE_ENABLE_SHIFT, tmp0; \ - lda tmp1, PCI_MEM(zero); \ - sll tmp1, 29, tmp1; \ - bis tmp0, tmp1, tmp0; \ - sll reg, 8*(port & 3), tmp1; \ - stl_p tmp1, 0x00(tmp0); \ - mb - -/* -** Macro to write a longword from a register to a specified port -*/ -#define OutPortLongReg(port,reg,tmp0,tmp1) \ - LDLI (tmp0, port); \ - sll tmp0, BYTE_ENABLE_SHIFT, tmp0; \ - lda tmp1, PCI_MEM(zero); \ - sll tmp1, 29, tmp1; \ - bis tmp0, tmp1, tmp0; \ - stl_p tmp1, 0x18(tmp0); \ - mb - -/* -** Macro to read a byte from a specified port -*/ -#define InPortByte(port,tmp0,tmp1) \ - LDLI (tmp0, port); \ - sll tmp0, BYTE_ENABLE_SHIFT, tmp0; \ - lda tmp1, PCI_MEM(zero); \ - sll tmp1, 29, tmp1; \ - bis tmp0, tmp1, tmp0; \ - ldl_p tmp0, 0x00(tmp0); \ - srl tmp0, (8 * (port & 3)), tmp0; \ - zap tmp0, 0xfe, tmp0 diff --git a/system/alpha/h/regdefs.h b/system/alpha/h/regdefs.h deleted file mode 100644 index 3a12b8c63..000000000 --- a/system/alpha/h/regdefs.h +++ /dev/null @@ -1,81 +0,0 @@ -/* -Copyright 1993Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - - -#ifndef __REGDEFS_H_LOADED -#define __REGDEFS_H_LOADED - -/* - * $Id: regdefs.h,v 1.1.1.1 1997/10/30 23:27:17 verghese Exp $; - */ - -/* - * $Log: regdefs.h,v $ - * Revision 1.1.1.1 1997/10/30 23:27:17 verghese - * current 10/29/97 - * - * Revision 1.2 1995/02/24 16:00:18 fdh - * Conditional around #define AT. - * - * Revision 1.1 1995/02/24 15:54:26 fdh - * Initial revision - * - */ - -#define v0 $0 -#define t0 $1 -#define t1 $2 -#define t2 $3 -#define t3 $4 -#define t4 $5 -#define t5 $6 -#define t6 $7 -#define t7 $8 -#define s0 $9 -#define s1 $10 -#define s2 $11 -#define s3 $12 -#define s4 $13 -#define s5 $14 -#define s6 $15 -#define fp $15 /* fp & s6 are the same */ -#define a0 $16 -#define a1 $17 -#define a2 $18 -#define a3 $19 -#define a4 $20 -#define a5 $21 -#define t8 $22 -#define t9 $23 -#define t10 $24 -#define t11 $25 -#define ra $26 -#define pv $27 /* pv and t5 are the same */ -#define t12 $27 -#ifndef AT -#define AT $at -#endif -#define gp $29 -#define sp $30 -#define zero $31 - -#endif /* __REGDEFS_H_LOADED */ diff --git a/system/alpha/h/rpb.h b/system/alpha/h/rpb.h index 225aec23f..81ed5bb14 100644 --- a/system/alpha/h/rpb.h +++ b/system/alpha/h/rpb.h @@ -1,32 +1,30 @@ /* -Copyright 1990 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -/* - * "@(#)rpb.h 9.2 (ULTRIX/OSF) 10/30/91" + * Copyright 1990 Hewlett-Packard Development Company, L.P. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. */ + /* * Defines for the architected startup addresses. */ - #define HWRPB_ADDR 0x10000000 /* 256 MB */ #define BOOT_ADDR 0x20000000 /* 512 MB */ #define PGTBL_ADDR 0x40000000 /* 1 GB */ @@ -66,7 +64,7 @@ SOFTWARE. #define SV_PF_RSVD 0x00000000 /* RESERVED */ -#define SV_RESERVED 0x00000000 /* All STS bits; zero for backward compat. */ +#define SV_RESERVED 0x00000000 /* All STS bits; 0 for back compat */ #define SV_MPCAP 0x00000001 /* MP capable */ #define SV_PF_UNITED 0x00000020 /* United */ #define SV_PF_SEPARATE 0x00000040 /* Separate */ @@ -76,8 +74,8 @@ SOFTWARE. #define SV_GRAPHICS 0x00000200 /* Embedded graphics processor */ -#define SV_STS_MASK 0x0000fc00 /* STS bits - system and I/O board */ -#define SV_SANDPIPER 0x00000400 /* others define system platforms. */ +#define SV_STS_MASK 0x0000fc00 /* STS bits - system and I/O board */ +#define SV_SANDPIPER 0x00000400 /* others define system platforms */ #define SV_FLAMINGO 0x00000800 /* STS BIT SETTINGS */ #define SV_HOTPINK 0x00000c00 /* STS BIT SETTINGS */ #define SV_FLAMINGOPLUS 0x00001000 /* STS BIT SETTINGS */ @@ -96,7 +94,7 @@ SOFTWARE. #define CONS_NONE 0 /* no console present */ #define CONS_SRVC 1 /* console is service processor */ #define CONS_DZ 2 /* console is dz/dl VT device */ -#define CONS_GRPH 3 /* cons is graphics dev w/ dz/dl keybd*/ +#define CONS_GRPH 3 /* cons is gfx dev w/ dz/dl keybd*/ #define CONS_REM 4 /* cons is remote, protocal enet/MOP */ /* @@ -108,50 +106,49 @@ SOFTWARE. #define PALvar_OpenVMS 1 #define PALvar_OSF1 2 -#include <sys/types.h> /* * The Alpha restart parameter block, which is a page or 2 in low memory */ struct rpb { struct rpb *rpb_selfref; /* 000: physical self-reference */ - long rpb_string; /* 008: contains string "HWRPB" */ - long rpb_vers; /* 010: HWRPB version number */ - u_long rpb_size; /* 018: bytes in RPB perCPU CTB CRB MEMDSC */ - u_long rpb_cpuid; /* 020: primary cpu id */ - u_long rpb_pagesize; /* 028: page size in bytes */ - u_long rpb_addrbits; /* 030: number of phys addr bits */ - u_long rpb_maxasn; /* 038: max valid ASN */ - char rpb_ssn[16]; /* 040: system serial num: 10 ascii chars */ - u_long rpb_systype; /* 050: system type */ - long rpb_sysvar; /* 058: system variation */ - long rpb_sysrev; /* 060: system revision */ - u_long rpb_clock; /* 068: scaled interval clock intr freq */ - u_long rpb_counter; /* 070: cycle counter frequency */ - u_long rpb_vptb; /* 078: virtual page table base */ - long rpb_res1; /* 080: reserved */ - u_long rpb_trans_off; /* 088: offset to translation buffer hint */ - u_long rpb_numprocs; /* 090: number of processor slots */ - u_long rpb_slotsize; /* 098: per-cpu slot size */ - u_long rpb_percpu_off; /* 0A0: offset to per_cpu slots */ - u_long rpb_num_ctb; /* 0A8: number of CTBs */ - u_long rpb_ctb_size; /* 0B0: bytes in largest CTB */ - u_long rpb_ctb_off; /* 0B8: offset to CTB (cons term block) */ - u_long rpb_crb_off; /* 0C0: offset to CRB (cons routine block) */ - u_long rpb_mdt_off; /* 0C8: offset to memory descriptor table */ - u_long rpb_config_off; /* 0D0: offset to config data block */ - u_long rpb_fru_off; /* 0D8: offset to FRU table */ - void (*rpb_saveterm)(); /* 0E0: virt addr of save term routine */ - long rpb_saveterm_pv; /* 0E8: proc value for save term routine */ - void (*rpb_rstrterm)(); /* 0F0: virt addr of restore term routine */ - long rpb_rstrterm_pv; /* 0F8: proc value for restore term routine */ - void (*rpb_restart)(); /* 100: virt addr of CPU restart routine */ - long rpb_restart_pv; /* 108: proc value for CPU restart routine */ - long rpb_software; /* 110: used to determine presence of kdebug */ - long rpb_hardware; /* 118: reserved for hardware */ - long rpb_checksum; /* 120: checksum of prior entries in rpb */ - long rpb_rxrdy; /* 128: receive ready bitmask */ - long rpb_txrdy; /* 130: transmit ready bitmask */ - u_long rpb_dsr_off; /* 138: Dynamic System Recog. offset */ + long rpb_string; /* 008: contains string "HWRPB" */ + long rpb_vers; /* 010: HWRPB version number */ + ulong rpb_size; /* 018: bytes in RPB perCPU CTB CRB MEMDSC */ + ulong rpb_cpuid; /* 020: primary cpu id */ + ulong rpb_pagesize; /* 028: page size in bytes */ + ulong rpb_addrbits; /* 030: number of phys addr bits */ + ulong rpb_maxasn; /* 038: max valid ASN */ + char rpb_ssn[16]; /* 040: system serial num: 10 ascii chars */ + ulong grpb_systype; /* 050: system type */ + long rpb_sysvar; /* 058: system variation */ + long rpb_sysrev; /* 060: system revision */ + ulong rpb_clock; /* 068: scaled interval clock intr freq */ + ulong rpb_counter; /* 070: cycle counter frequency */ + ulong rpb_vptb; /* 078: virtual page table base */ + long rpb_res1; /* 080: reserved */ + ulong rpb_trans_off; /* 088: offset to translation buffer hint */ + ulong rpb_numprocs; /* 090: number of processor slots */ + ulong rpb_slotsize; /* 098: per-cpu slot size */ + ulong rpb_percpu_off; /* 0A0: offset to per_cpu slots */ + ulong rpb_num_ctb; /* 0A8: number of CTBs */ + ulong rpb_ctb_size; /* 0B0: bytes in largest CTB */ + ulong rpb_ctb_off; /* 0B8: offset to CTB (cons term block) */ + ulong rpb_crb_off; /* 0C0: offset to CRB (cons routine block) */ + ulong rpb_mdt_off; /* 0C8: offset to memory descriptor table */ + ulong rpb_config_off; /* 0D0: offset to config data block */ + ulong rpb_fru_off; /* 0D8: offset to FRU table */ + void (*rpb_saveterm)(); /* 0E0: virt addr of save term routine */ + long rpb_saveterm_pv; /* 0E8: proc value for save term routine */ + void (*rpb_rstrterm)(); /* 0F0: virt addr of restore term routine */ + long rpb_rstrterm_pv; /* 0F8: proc value for restore term routine */ + void (*rpb_restart)(); /* 100: virt addr of CPU restart routine */ + long rpb_restart_pv; /* 108: proc value for CPU restart routine */ + long rpb_software; /* 110: used to determine presence of kdebug */ + long rpb_hardware; /* 118: reserved for hardware */ + long rpb_checksum; /* 120: checksum of prior entries in rpb */ + long rpb_rxrdy; /* 128: receive ready bitmask */ + long rpb_txrdy; /* 130: transmit ready bitmask */ + ulong rpb_dsr_off; /* 138: Dynamic System Recog. offset */ }; #define rpb_kdebug rpb_software @@ -165,15 +162,15 @@ struct rpb { * with formats used by other palcode types. */ struct bootpcb { - long rpb_ksp; /* 000: kernel stack pointer */ - long rpb_usp; /* 008: user stack pointer */ - long rpb_ptbr; /* 010: page table base register */ - int rpb_cc; /* 018: cycle counter */ - int rpb_asn; /* 01C: address space number */ - long rpb_proc_uniq; /* 020: proc/thread unique value */ - long rpb_fen; /* 028: floating point enable */ - long rpb_palscr[2]; /* 030: pal scratch area */ - long rpb_pcbpad[8]; /* 040: padding for fixed size */ + long rpb_ksp; /* 000: kernel stack pointer */ + long rpb_usp; /* 008: user stack pointer */ + long rpb_ptbr; /* 010: page table base register */ + int rpb_cc; /* 018: cycle counter */ + int rpb_asn; /* 01C: address space number */ + long rpb_proc_uniq; /* 020: proc/thread unique value */ + long rpb_fen; /* 028: floating point enable */ + long rpb_palscr[2]; /* 030: pal scratch area */ + long rpb_pcbpad[8]; /* 040: padding for fixed size */ }; /* @@ -182,10 +179,10 @@ struct bootpcb { * of secondary processors. */ struct iccb { - u_int iccb_rxlen; /* receive length in bytes */ - u_int iccb_txlen; /* transmit length in bytes */ - char iccb_rxbuf[80]; /* receive buffer */ - char iccb_txbuf[80]; /* transmit buffer */ + uint iccb_rxlen; /* receive length in bytes */ + uint iccb_txlen; /* transmit length in bytes */ + char iccb_rxbuf[80]; /* receive buffer */ + char iccb_txbuf[80]; /* transmit buffer */ }; /* @@ -196,29 +193,29 @@ struct iccb { */ struct rpb_percpu { struct bootpcb rpb_pcb; /* 000: boot/restart HWPCB */ - long rpb_state; /* 080: per-cpu state bits */ - long rpb_palmem; /* 088: palcode memory length */ - long rpb_palscratch; /* 090: palcode scratch length */ - long rpb_palmem_addr; /* 098: phys addr of palcode mem space */ - long rpb_palscratch_addr; /* 0A0: phys addr of palcode scratch space */ - long rpb_palrev; /* 0A8: PALcode rev required */ - long rpb_proctype; /* 0B0: processor type */ - long rpb_procvar; /* 0B8: processor variation */ - long rpb_procrev; /* 0C0: processor revision */ - char rpb_procsn[16]; /* 0C8: proc serial num: 10 ascii chars */ - long rpb_logout; /* 0D8: phys addr of logout area */ - long rpb_logout_len; /* 0E0: length in bytes of logout area */ - long rpb_haltpb; /* 0E8: halt pcb base */ - long rpb_haltpc; /* 0F0: halt pc */ - long rpb_haltps; /* 0F8: halt ps */ - long rpb_haltal; /* 100: halt arg list (R25) */ - long rpb_haltra; /* 108: halt return address (R26) */ - long rpb_haltpv; /* 110: halt procedure value (R27) */ - long rpb_haltcode; /* 118: reason for halt */ - long rpb_software; /* 120: for software */ - struct iccb rpb_iccb; /* 128: inter-console communications buffer */ - long rpb_palrev_avail[16];/* 1D0: PALcode revs available */ - long rpb_pcrsvd[6]; /* 250: reserved for arch use */ + long rpb_state; /* 080: per-cpu state bits */ + long rpb_palmem; /* 088: palcode memory length */ + long rpb_palscratch; /* 090: palcode scratch length */ + long rpb_palmem_addr; /* 098: phys addr of palcode mem space */ + long rpb_palscratch_addr; /* 0A0: phys addr of palcode scratch space */ + long rpb_palrev; /* 0A8: PALcode rev required */ + long rpb_proctype; /* 0B0: processor type */ + long rpb_procvar; /* 0B8: processor variation */ + long rpb_procrev; /* 0C0: processor revision */ + char rpb_procsn[16]; /* 0C8: proc serial num: 10 ascii chars */ + long rpb_logout; /* 0D8: phys addr of logout area */ + long rpb_logout_len; /* 0E0: length in bytes of logout area */ + long rpb_haltpb; /* 0E8: halt pcb base */ + long rpb_haltpc; /* 0F0: halt pc */ + long rpb_haltps; /* 0F8: halt ps */ + long rpb_haltal; /* 100: halt arg list (R25) */ + long rpb_haltra; /* 108: halt return address (R26) */ + long rpb_haltpv; /* 110: halt procedure value (R27) */ + long rpb_haltcode; /* 118: reason for halt */ + long rpb_software; /* 120: for software */ + struct iccb rpb_iccb; /* 128: inter-console communications buffer */ + long rpb_palrev_avail[16]; /* 1D0: PALcode revs available */ + long rpb_pcrsvd[6]; /* 250: reserved for arch use */ /* the dump stack grows from the end of the rpb page not to reach here */ }; @@ -229,13 +226,13 @@ struct rpb_percpu { * The memory cluster descriptor. */ struct rpb_cluster { - long rpb_pfn; /* 000: starting PFN of this cluster */ - long rpb_pfncount; /* 008: count of PFNs in this cluster */ - long rpb_pfntested; /* 010: count of tested PFNs in cluster */ - long rpb_va; /* 018: va of bitmap */ - long rpb_pa; /* 020: pa of bitmap */ - long rpb_checksum; /* 028: checksum of bitmap */ - long rpb_usage; /* 030: usage of cluster */ + long rpb_pfn; /* 000: starting PFN of this cluster */ + long rpb_pfncount; /* 008: count of PFNs in this cluster */ + long rpb_pfntested; /* 010: count of tested PFNs in cluster */ + long rpb_va; /* 018: va of bitmap */ + long rpb_pa; /* 020: pa of bitmap */ + long rpb_checksum; /* 028: checksum of bitmap */ + long rpb_usage; /* 030: usage of cluster */ }; #define CLUSTER_USAGE_OS ((long)0) #define CLUSTER_USAGE_PAL ((long)1) @@ -250,9 +247,9 @@ struct rpb_cluster { * of memory). */ struct rpb_mdt { - long rpb_checksum; /* 000: checksum of entire mem desc table */ - long rpb_impaddr; /* 008: PA of implementation dep info */ - long rpb_numcl; /* 010: number of clusters */ + long rpb_checksum; /* 000: checksum of entire mem desc table */ + long rpb_impaddr; /* 008: PA of implementation dep info */ + long rpb_numcl; /* 010: number of clusters */ struct rpb_cluster rpb_cluster[1]; /* first instance of a cluster */ }; @@ -261,38 +258,37 @@ struct rpb_mdt { * UART console device. */ struct ctb_tt { - long ctb_type; /* 000: console type */ - long ctb_unit; /* 008: console unit */ - long ctb_resv; /* 010: reserved */ - long ctb_length; /* 018: byte length of device dep */ - /* portion */ - long ctb_csr; /* 020: CSR Address */ - long ctb_tivec; /* 028: <63>=tie; interrupt vector */ - long ctb_rivec; /* 030: <63>=rie; interrupt vector */ - long ctb_baud; /* 038: baud rate */ - long ctb_put_sts; /* 040: PUTS callback extended status */ - long ctb_get_sts; /* 048: GETS callback extended status */ - long ctb_rsvd[1]; /* 050: reserved for console use */ + long ctb_type; /* 000: console type */ + long ctb_unit; /* 008: console unit */ + long ctb_resv; /* 010: reserved */ + long ctb_length; /* 018: byte length of device dep portion */ + long ctb_csr; /* 020: CSR Address */ + long ctb_tivec; /* 028: <63>=tie; interrupt vector */ + long ctb_rivec; /* 030: <63>=rie; interrupt vector */ + long ctb_baud; /* 038: baud rate */ + long ctb_put_sts; /* 040: PUTS callback extended status */ + long ctb_get_sts; /* 048: GETS callback extended status */ + long ctb_rsvd[1]; /* 050: reserved for console use */ }; /* * The "Console Terminal Block" portion of the HWRPB. */ struct rpb_ctb { - long rpb_type; /* 000: console type */ - long rpb_unit; /* 008: console unit */ - long rpb_resv; /* 010: reserved */ - long rpb_length; /* 018: byte length of device dep portion */ - long rpb_first; /* 000: first field of device dep portion */ + long rpb_type; /* 000: console type */ + long rpb_unit; /* 008: console unit */ + long rpb_resv; /* 010: reserved */ + long rpb_length; /* 018: byte length of device dep portion */ + long rpb_first; /* 000: first field of device dep portion */ }; /* * The physical/virtual map for the console routine block. */ struct rpb_map { - long rpb_virt; /* virtual address for map entry */ - long rpb_phys; /* phys address for map entry */ - long rpb_pgcount; /* page count for map entry */ + long rpb_virt; /* virtual address for map entry */ + long rpb_phys; /* phys address for map entry */ + long rpb_pgcount; /* page count for map entry */ }; /* @@ -300,22 +296,23 @@ struct rpb_map { * Note: the "offsets" are all relative to the start of the HWRPB (HWRPB_ADDR). */ struct rpb_crb { - long rpb_va_disp; /* va of call-back dispatch rtn */ - long rpb_pa_disp; /* pa of call-back dispatch rtn */ - long rpb_va_fixup; /* va of call-back fixup rtn */ - long rpb_pa_fixup; /* pa of call-back fixup rtn */ - long rpb_num; /* number of entries in phys/virt map */ - long rpb_mapped_pages; /* Number of pages to be mapped */ - struct rpb_map rpb_map[1]; /* first instance of a map entry */ + long rpb_va_disp; /* va of call-back dispatch rtn */ + long rpb_pa_disp; /* pa of call-back dispatch rtn */ + long rpb_va_fixup; /* va of call-back fixup rtn */ + long rpb_pa_fixup; /* pa of call-back fixup rtn */ + long rpb_num; /* number of entries in phys/virt map */ + long rpb_mapped_pages; /* Number of pages to be mapped */ + struct rpb_map rpb_map[1]; /* first instance of a map entry */ }; /* * These macros define where within the HWRPB the CTB and CRB are located. */ -#define CTB_SETUP ((struct rpb_ctb *) ((long)hwrpb_addr + \ - (long)(hwrpb_addr->rpb_ctb_off))) -#define CRB_SETUP ((struct rpb_crb *) ((long)hwrpb_addr + \ - (long)(hwrpb_addr->rpb_crb_off))) +#define CTB_SETUP \ + ((struct rpb_ctb *) ((long)hwrpb_addr + (long)(hwrpb_addr->rpb_ctb_off))) + +#define CRB_SETUP \ + ((struct rpb_crb *) ((long)hwrpb_addr + (long)(hwrpb_addr->rpb_crb_off))) /* * The "Dynamic System Recognition" portion of the HWRPB. @@ -324,8 +321,8 @@ struct rpb_crb { * data for software licensing */ struct rpb_dsr { - long rpb_smm; /* SMM nubber used by LMF */ - u_long rpb_lurt_off; /* offset to LURT table */ - u_long rpb_sysname_off; /* offset to sysname char count */ - int lurt[10]; /* XXM has one LURT entry */ + long rpb_smm; /* SMM nubber used by LMF */ + ulong rpb_lurt_off; /* offset to LURT table */ + ulong rpb_sysname_off; /* offset to sysname char count */ + int lurt[10]; /* XXM has one LURT entry */ }; diff --git a/system/alpha/palcode/Makefile b/system/alpha/palcode/Makefile index 8ea1a4f5f..34b60cee3 100644 --- a/system/alpha/palcode/Makefile +++ b/system/alpha/palcode/Makefile @@ -1,75 +1,91 @@ -#Copyright (c) 2003, 2004 -#The Regents of The University of Michigan -#All Rights Reserved +# Copyright (c) 2003, 2004 +# The Regents of The University of Michigan +# All Rights Reserved # -#This code is part of the M5 simulator, developed by Nathan Binkert, -#Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions -#from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew -#Schultz. +# This code is part of the M5 simulator, developed by Nathan Binkert, +# Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions +# from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew +# Schultz. # -#Permission is granted to use, copy, create derivative works and -#redistribute this software and such derivative works for any purpose, -#so long as the copyright notice above, this grant of permission, and -#the disclaimer below appear in all copies made; and so long as the -#name of The University of Michigan is not used in any advertising or -#publicity pertaining to the use or distribution of this software -#without specific, written prior authorization. +# Permission is granted to use, copy, create derivative works and +# redistribute this software and such derivative works for any purpose, +# so long as the copyright notice above, this grant of permission, and +# the disclaimer below appear in all copies made; and so long as the +# name of The University of Michigan is not used in any advertising or +# publicity pertaining to the use or distribution of this software +# without specific, written prior authorization. # -#THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE -#UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT -#WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER EXPRESS OR -#IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF -#MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REGENTS OF -#THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, -#INCLUDING DIRECT, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL -#DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR IN CONNECTION -#WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS HEREAFTER -#ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. - -#Makefile for palcode -#Works on alpha-linux and builds elf executable +# THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE +# UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT +# WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER EXPRESS OR +# IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REGENTS OF +# THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, +# INCLUDING DIRECT, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL +# DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR IN CONNECTION +# WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS HEREAFTER +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + +# Makefile for palcode +# Works on alpha-linux and builds elf executable ### If we are not compiling on an alpha, we must use cross tools ### -ifneq ($(ARCHNAME), alpha) +ifneq ($(shell uname -m), alpha) CROSS_COMPILE?=alpha-unknown-linux-gnu- endif CC=$(CROSS_COMPILE)gcc AS=$(CROSS_COMPILE)as LD=$(CROSS_COMPILE)ld -CFLAGS=-I . -I ../h -D SIMOS -D BUILD_PALCODE -nostdinc -nostdinc++ -Wa,-m21164 +CFLAGS=-I . -I ../h -nostdinc -nostdinc++ -Wa,-m21164 LDFLAGS=-Ttext 0x4000 -TLOBJS = osfpal.o platform_tlaser.o -TLOBJS_COPY = osfpal_cache_copy.o osfpal_cache_copy_unaligned.o -TSOBJS = osfpal.o platform_m5.o -TSBOBJS = osfpal.o platform_m5b.o -TSOBJS_COPY = osfpal_cache_copy.o osfpal_cache_copy_unaligned.o +TLOBJS = osfpal.o platform_tlaser.o +TLOBJS_COPY = osfpal_cache_copy.o platform_tlaser.o +TLOBJS_COPY_UNALIGNED = osfpal_cache_copy_unaligned.o platform_tlaser.o +TSOBJS = osfpal.o platform_tsunami.o +TSBOBJS = osfpal.o platform_bigtsunami.o +TSOBJS_COPY = osfpal_cache_copy.o platform_tsunami.o +TSOBJS_COPY_UNALIGNED = osfpal_cache_copy_unaligned.o platform_bigtsunami.o + +all: tlaser tsunami tsunami_b64 -%.o: %.S +all_copy: tlaser tlaser_copy tsunami tsunami_b64 tsunami_copy + +osfpal.o: osfpal.S $(CC) $(CFLAGS) -o $@ -c $< -all: tsunami tsunami_b64 - -platform_m5b.o: platform_m5.S +osfpal_cache_copy.o: osfpal.S + $(CC) $(CFLAGS) -DCACHE_COPY -o $@ -c $< + +osfpal_cache_copy_unaligned.o: osfpal.S + $(CC) $(CFLAGS) -DCACHE_COPY -DCACHE_COPY_UNALIGNED -o $@ -c $< + +platform_tlaser.o: platform.S + $(CC) $(CFLAGS) -DTLASER -o $@ -c $< + +platform_tsunami.o: platform.S + $(CC) $(CFLAGS) -DTSUNAMI -o $@ -c $< + +platform_bigtsunami.o: platform.S $(CC) $(CFLAGS) -DBIG_TSUNAMI -o $@ -c $< - + tlaser: $(TLOBJS) - $(LD) $(LDFLAGS) -o tl_osfpal osfpal.o platform_tlaser.o + $(LD) $(LDFLAGS) -o tl_osfpal $(TLOBJS) -tlaser_copy: $(TLOBJS_COPY) $(TLOBJS) - $(LD) $(LDFLAGS) -o tl_osfpal_cache osfpal_cache_copy.o platform_tlaser.o - $(LD) $(LDFLAGS) -o tl_osfpal_unalign osfpal_cache_copy_unaligned.o platform_tlaser.o +tlaser_copy: $(TLOBJS_COPY) $(TLOBJS_COPY_UNALIGNED) + $(LD) $(LDFLAGS) -o tl_osfpal_cache $(TLOBJS_COPY) + $(LD) $(LDFLAGS) -o tl_osfpal_unalign $(TLOBJS_COPY_UNALIGNED) tsunami: $(TSOBJS) - $(LD) $(LDFLAGS) -o ts_osfpal osfpal.o platform_m5.o + $(LD) $(LDFLAGS) -o ts_osfpal $(TSOBJS) tsunami_b64: $(TSBOBJS) - $(LD) $(LDFLAGS) -o tsb_osfpal osfpal.o platform_m5b.o + $(LD) $(LDFLAGS) -o tsb_osfpal $(TSBOBJS) -tsunami_copy: $(TSOBJS) $(TSOBJS_COPY) - $(LD) $(LDFLAGS) -o ts_osfpal_cache osfpal_cache_copy.o platform_m5.o - $(LD) $(LDFLAGS) -o ts_osfpal_unalign osfpal_cache_copy_unaligned.o platform_m5.o +tsunami_copy: $(TSOBJS_COPY) $(TSOBJS_COPY_UNALIGNED) + $(LD) $(LDFLAGS) -o ts_osfpal_cache $(TSOBJS_COPY) + $(LD) $(LDFLAGS) -o ts_osfpal_unalign $(TSOBJS_COPY_UNALIGNED) clean: rm -f *.o tl_osfpal tl_osfpal_cache tl_osfpal_unalign ts_osfpal \ diff --git a/system/alpha/palcode/osfpal.S b/system/alpha/palcode/osfpal.S index c46af0cdf..b19ce3f01 100644 --- a/system/alpha/palcode/osfpal.S +++ b/system/alpha/palcode/osfpal.S @@ -30,35 +30,32 @@ */ /* -Copyright 1992, 1993, 1994, 1995 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ + * Copyright 1992, 1993, 1994, 1995 Hewlett-Packard Development + * Company, L.P. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ // modified to use the Hudson style "impure.h" instead of ev5_impure.sdl // since we don't have a mechanism to expand the data structures.... pb Nov/95 - -// build_fixed_image: not sure what means -// real_mm to be replaced during rewrite -// remove_save_state remove_restore_state can be remooved to save space ?? - - #include "ev5_defs.h" #include "ev5_impure.h" #include "ev5_alpha_defs.h" @@ -68,262 +65,29 @@ SOFTWARE. #include "fromHudsonOsf.h" #include "dc21164FromGasSources.h" -#ifdef SIMOS #define DEBUGSTORE(c) nop -#else -#define DEBUGSTORE(c) \ - lda r13, c(zero) ; \ - bsr r25, debugstore -#endif #define DEBUG_EXC_ADDR()\ bsr r25, put_exc_addr; \ DEBUGSTORE(13) ; \ DEBUGSTORE(10) -#define egore 0 -#define acore 0 -#define beh_model 0 -#define ev5_p2 1 -#define ev5_p1 0 -#define ldvpte_bug_fix 1 -#define osf_chm_fix 0 - -// Do we want to do this?? pb -#define spe_fix 0 -// Do we want to do this?? pb -#define build_fixed_image 0 - -#define ev5_pass2 -#define enable_p4_fixups 0 -#define osf_svmin 1 -#define enable_physical_console 0 -#define fill_err_hack 0 -#define icflush_on_tbix 0 -#define max_cpuid 1 -#define perfmon_debug 0 -#define rawhide_system 0 -#define rax_mode 0 - - -// This is the fix for the user-mode super page references causing the machine to crash. -#if (spe_fix == 1) && (build_fixed_image==1) -#define hw_rei_spe br r31, hw_rei_update_spe -#else +// This is the fix for the user-mode super page references causing the +// machine to crash. #define hw_rei_spe hw_rei -#endif - -// redefine a few of the distribution-code names to match the Hudson gas names. -// opcodes -#define ldqp ldq_p -#define stqp stq_p -#define ldlp ldl_p -#define stlp stl_p - -#define r0 $0 -#define r1 $1 -#define r2 $2 -#define r3 $3 -#define r4 $4 -#define r5 $5 -#define r6 $6 -#define r7 $7 -#define r8 $8 -#define r9 $9 -#define r10 $10 -#define r11 $11 -#define r12 $12 -#define r13 $13 -#define r14 $14 -#define r15 $15 -#define r16 $16 -#define r17 $17 -#define r18 $18 -#define r19 $19 -#define r20 $20 -#define r21 $21 -#define r22 $22 -#define r23 $23 -#define r24 $24 -#define r25 $25 -#define r26 $26 -#define r27 $27 -#define r28 $28 -#define r29 $29 -#define r30 $30 -#define r31 $31 - -// .title "EV5 OSF PAL" -// .ident "V1.18" -// -//**************************************************************************** -//* * -//* Copyright (c) 1992, 1993, 1994, 1995 * -//* by DIGITAL Equipment Corporation, Maynard, Mass. * -//* * -//* This software is furnished under a license and may be used and copied * -//* only in accordance with the terms of such license and with the * -//* inclusion of the above copyright notice. This software or any other * -//* copies thereof may not be provided or otherwise made available to any * -//* other person. No title to and ownership of the software is hereby * -//* transferred. * -//* * -//* The information in this software is subject to change without notice * -//* and should not be construed as a commitment by DIGITAL Equipment * -//* Corporation. * -//* * -//* DIGITAL assumes no responsibility for the use or reliability of its * -//* software on equipment which is not supplied by DIGITAL. * -//* * -//**************************************************************************** - -// .sbttl "Edit History" -//+ -// Who Rev When What -// ------------ --- ----------- -------------------------------- -// DB 0.0 03-Nov-1992 Start -// DB 0.1 28-Dec-1992 add swpctx -// DB 0.2 05-Jan-1993 Bug: PVC found mtpr dtb_CM -> virt ref bug -// DB 0.3 11-Jan-1993 rearrange trap entry points -// DB 0.4 01-Feb-1993 add tbi -// DB 0.5 04-Feb-1993 real MM, kludge reset flow, kludge swppal -// DB 0.6 09-Feb-1993 Bug: several stack pushers used r16 for pc (should be r14) -// DB 0.7 10-Feb-1993 Bug: pushed wrong PC (+8) on CALL_PAL OPCDEC -// Bug: typo on register number for store in wrunique -// Bug: rti to kern uses r16 as scratch -// Bug: callsys saving wrong value in pt_usp -// DB 0.8 16-Feb-1993 PVC: fix possible pt write->read bug in wrkgp, wrusp -// DB 0.9 18-Feb-1993 Bug: invalid_dpte_handler shifted pte twice -// Bug: rti stl_c could corrupt the stack -// Bug: unaligned returning wrong value in r17 (or should be and) -// DB 0.10 19-Feb-1993 Add draina, rd/wrmces, cflush, cserve, interrupt -// DB 0.11 23-Feb-1993 Turn caches on in reset flow -// DB 0.12 10-Mar-1993 Bug: wrong value for icsr for FEN in kern mode flow -// DB 0.13 15-Mar-1993 Bug: wrong value pushed for PC in invalid_dpte_handler if stack push tbmisses -// DB 0.14 23-Mar-1993 Add impure pointer paltemp, reshuffle some other paltemps to match VMS -// DB 0.15 15-Apr-1993 Combine paltemps for WHAMI and MCES -// DB 0.16 12-May-1993 Update reset -// New restriction: no mfpr exc_addr in cycle 1 of call_pal flows -// Bug: in wrmces, not clearing DPC, DSC -// Update swppal -// Add pal bugchecks, pal_save_state, pal_restore_state -// DB 0.17 24-May-1993 Add dfault_in_pal flow; fixup stack builder to have common state for pc/ps. -// New restriction: No hw_rei_stall in 0,1,2 after mtpr itb_asn -// DB 0.18 26-May-1993 PVC fixes -// JM 0.19 01-jul-1993 Bug: OSFPAL_CALPAL_OPCDEC, TRAP_OPCDEC -- move mt exc_addr after stores -// JM 0.20 07-jul-1993 Update cns_ and mchk_ names for impure.mar conversion to .sdl -// Bug: exc_addr was being loaded before stores that could dtb_miss in the following -// routines: TRAP_FEN,FEN_TO_OPCDEC,CALL_PAL_CALLSYS,RTI_TO_KERN -// JM 0.21 26-jul-1993 Bug: move exc_addr load after ALL stores in the following routines: -// TRAP_IACCVIO::,TRAP_OPCDEC::,TRAP_ARITH::,TRAP_FEN:: -// dfault_trap_cont:,fen_to_opcdec:,invalid_dpte_handler: -// osfpal_calpal_opcdec:,CALL_PAL_callsys::,TRAP_UNALIGN:: -// Bugs from PVC: trap_unalign - mt pt0 ->mf pt0 within 2 cycles -// JM 0.22 28-jul-1993 Add WRIPIR instruction -// JM 0.23 05-aug-1993 Bump version number for release -// JM 0.24 11-aug-1993 Bug: call_pal_swpipl - palshadow write -> hw_rei violation -// JM 0.25 09-sep-1993 Disable certain "hidden" pvc checks in call_pals; -// New restriction: No hw_rei_stall in 0,1,2,3,4 after mtpr itb_asn - affects HALT(raxmode), -// and SWPCTX -// JM 0.26 07-oct-1993 Re-implement pal_version -// JM 0.27 12-oct-1993 One more time: change pal_version format to conform to SRM -// JM 0.28 14-oct-1993 Change ic_flush routine to pal_ic_flush -// JM 0.29 19-oct-1993 BUG(?): dfault_in_pal: use exc_addr to check for dtbmiss,itbmiss check instead -// of mm_stat<opcode>. mm_stat contains original opcode, not hw_ld. -// JM 0.30 28-oct-1993 BUG: PVC violation - mf exc_addr in first cycles of call_pal in rti,retsys -// JM 0.31 15-nov-1993 BUG: WRFEN trashing r0 -// JM 0.32 21-nov-1993 BUG: dtb_ldq,itb_ldq (used in dfault_in_pal) not defined when real_mm=0 -// JM 0.33 24-nov-1993 save/restore_state - -// BUG: use ivptbr to restore mvptbr -// BUG: adjust hw_ld/st base/offsets to accomodate 10-bit offset limit -// CHANGE: Load 2 pages into dtb to accomodate compressed logout area/multiprocessors -// JM 0.34 20-dec-1993 BUG: set r11<mode> to kernel for ksnv halt case -// BUG: generate ksnv halt when tb miss on kernel stack accesses -// save exc_addr in r14 for invalid_dpte stack builder -// JM 0.35 30-dec-1993 BUG: PVC violation in trap_arith - mt exc_sum in shadow of store with mf exc_mask in -// the same shadow -// JM 0.36 6-jan-1994 BUG: fen_to_opcdec - savePC should be PC+4, need to save old PS, update new PS -// New palcode restiction: mt icsr<fpe,hwe> --> 3 bubbles to hw_rei --affects wrfen -// JM 0.37 25-jan-1994 BUG: PVC violations in restore_state - mt dc_mode/maf_mode ->mbox instructions -// Hide impure area manipulations in macros -// BUG: PVC violation in save and restore state-- move mt icsr out of shadow of ld/st -// Add some pvc_violate statements -// JM 0.38 1-feb-1994 Changes to save_state: save pt1; don't save r31,f31; update comments to reflect reality; -// Changes to restore_state: restore pt1, icsr; don't restore r31,f31; update comments -// Add code to ensure fen bit set in icsr before ldt -// conditionally compile rax_more_reset out. -// move ldqp,stqp macro definitions to ev5_pal_macros.mar and add .mcall's for them here -// move rax reset stuff to ev5_osf_system_pal.m64 -// JM 0.39 7-feb-1994 Move impure pointer to pal scratch space. Use former pt_impure for bc_ctl shadow -// and performance monitoring bits -// Change to save_state routine to save more iprs. -// JM 0.40 19-feb-1994 Change algorithm in save/restore_state routines; add f31,r31 back in -// JM 0.41 21-feb-1994 Add flags to compile out save/restore state (not needed in some systems) -// remove_save_state,remove_restore_state;fix new pvc violation in save_state -// JM 0.42 22-feb-1994 BUG: save_state overwriting r3 -// JM 0.43 24-feb-1994 BUG: save_state saving wrong icsr -// JM 0.44 28-feb-1994 Remove ic_flush from wr_tbix instructions -// JM 0.45 15-mar-1994 BUG: call_pal_tbi trashes a0 prior to range check (instruction order problem) -// New pal restriction in pal_restore_state: icsr<fpe>->floating instr = 3 bubbles -// Add exc_sum and exc_mask to pal_save_state (not restore) -// JM 0.46 22-apr-1994 Move impure pointer back into paltemp; Move bc_ctl shadow and pmctr_ctl into impure -// area. -// Add performance counter support to swpctx and wrperfmon -// JM 0.47 9-may-1994 Bump version # (for ev5_osf_system_pal.m64 sys_perfmon fix) -// JM 0.48 13-jun-1994 BUG: trap_interrupt --> put new ev5 ipl at 30 for all osfipl6 interrupts -// JM 0.49 8-jul-1994 BUG: In the unlikely (impossible?) event that the branch to pal_pal_bug_check is -// taken in the interrupt flow, stack is pushed twice. -// SWPPAL - update to support ECO 59 to allow 0 as a valid address -// Add itb flush to save/restore state routines -// Change hw_rei to hw_rei_stall in ic_flush routine. Shouldn't be necessary, but -// conforms to itbia restriction. -// Added enable_physical_console flag (for enter/exit console routines only) -// JM 0.50 29-jul-1994 Add code to dfault & invalid_dpte_handler to ignore exceptions on a -// load to r31/f31. changed dfault_fetch_err to dfault_fetch_ldr31_err and -// nmiss_fetch_err to nmiss_fetch_ldr31_err. -// JM 1.00 1-aug-1994 Add pass2 support (swpctx) -// JM 1.01 2-aug-1994 swppal now passes bc_ctl/bc_config in r1/r2 -// JM 1.02 15-sep-1994 BUG: swpctx missing shift of pme bit to correct position in icsr (pass2) -// Moved perfmon code here from system file. -// BUG: pal_perfmon - enable function not saving correct enables when pme not set (pass1) -// JM 1.03 3-oct-1994 Added (pass2 only) code to wrperfmon enable function to look at pme bit. -// JM 1.04 14-oct-1994 BUG: trap_interrupt - ISR read (and saved) before INTID -- INTID can change -// after ISR read, but we won't catch the ISR update. reverse order -// JM 1.05 17-nov-1994 Add code to dismiss UNALIGN trap if LD r31/F31 -// JM 1.06 28-nov-1994 BUG: missing mm_stat shift for store case in trap_unalign (new bug due to "dismiss" code) -// JM 1.07 1-dec-1994 EV5 PASS1,2,3 BUG WORKAROUND: Add flag LDVPTE_BUG_FIX. In DTBMISS_DOUBLE, branch to -// DTBMISS_SINGLE if not in palmode. -// JM 1.08 9-jan-1995 Bump version number for change to EV5_OSF_SYSTEM_PAL.M64 - ei_stat fix in mchk logout frame -// JM 1.09 2-feb-1995 Add flag "spe_fix" and accompanying code to workaround pre-pass4 bug: Disable Ibox -// superpage mode in User mode and re-enable in kernel mode. -// EV5_OSF_SYSTEM_PAL.M64 and EV5_PALDEF.MAR (added pt_misc_v_cm) also changed to support this. -// JM 1.10 24-feb-1995 Set ldvpte_bug_fix regardless of ev5 pass. set default to ev5_p2 -// ES 1.11 10-mar-1995 Add flag "osf_chm_fix" to enable dcache in user mode only to avoid -// cpu bug. -// JM 1.12 17-mar-1995 BUG FIX: Fix F0 corruption problem in pal_restore_state -// ES 1.13 17-mar-1995 Refine osf_chm_fix -// ES 1.14 20-mar-1995 Don't need as many stalls before hw_rei_stall in chm_fix -// ES 1.15 21-mar-1995 Add a stall to avoid a pvc violation in pal_restore_state -// Force pvc checking of exit_console -// ES 1.16 26-apr-1995 In the wrperfmon disable function, correct meaning of R17<2:0> to ctl2,ctl2,ctl0 -// ES 1.17 01-may-1995 In hw_rei_update_spe code, in the osf_chm fix, use bic and bis (self-correcting) -// instead of xor to maintain previous mode in pt_misc -// ES 1.18 14-jul-1995 In wrperfmon enable on pass2, update pmctr even if current process does -// not have pme set. The bits in icsr maintain the master enable state. -// In sys_reset, add icsr<17>=1 for ev56 byte/word eco enable -// #define vmaj 1 #define vmin 18 #define vms_pal 1 #define osf_pal 2 #define pal_type osf_pal #define osfpal_version_l ((pal_type<<16) | (vmaj<<8) | (vmin<<0)) -//- -// .sbttl "PALtemp register usage" -//+ +/////////////////////////// +// PALtemp register usage +/////////////////////////// + // The EV5 Ibox holds 24 PALtemp registers. This maps the OSF PAL usage // for these PALtemps: // @@ -343,7 +107,8 @@ SOFTWARE. // pt13 reserved for system specific PAL // pt14 reserved for system specific PAL // pt15 reserved for system specific PAL -// pt16 MISC: scratch ! WHAMI<7:0> ! 0 0 0 MCES<4:0> pt_misc, pt_whami, pt_mces +// pt16 MISC: scratch ! WHAMI<7:0> ! 0 0 0 MCES<4:0> pt_misc, pt_whami, +// pt_mces // pt17 sysval pt_sysval // pt18 usp pt_usp // pt19 ksp pt_ksp @@ -352,11 +117,13 @@ SOFTWARE. // pt22 kgp pt_kgp // pt23 PCBB pt_pcbb // -//- - -// .sbttl "PALshadow register usage" // -//+ + + +///////////////////////////// +// PALshadow register usage +///////////////////////////// + // // EV5 shadows R8-R14 and R25 when in PALmode and ICSR<shadow_enable> = 1. // This maps the OSF PAL usage of R8 - R14 and R25: @@ -370,36 +137,6 @@ SOFTWARE. // r14 local scratch // r25 local scratch // -// -//- - -// .sbttl "ALPHA symbol definitions" -// _OSF_PSDEF GLOBAL -// _OSF_PTEDEF GLOBAL -// _OSF_VADEF GLOBAL -// _OSF_PCBDEF GLOBAL -// _OSF_SFDEF GLOBAL -// _OSF_MMCSR_DEF GLOBAL -// _SCBDEF GLOBAL -// _FRMDEF GLOBAL -// _EXSDEF GLOBAL -// _OSF_A0_DEF GLOBAL -// _MCESDEF GLOBAL - -// .sbttl "EV5 symbol definitions" - -// _EV5DEF -// _PALTEMP -// _MM_STAT_DEF -// _EV5_MM -// _EV5_IPLDEF - -// _HALT_CODES GLOBAL -// _MCHK_CODES GLOBAL - -// _PAL_IMPURE -// _PAL_LOGOUT - @@ -410,233 +147,21 @@ SOFTWARE. // the following). The options that can be adjusted cause the resultant PALcode // to reflect the desired target system. - -#define osfpal 1 // This is the PALcode for OSF. - -#ifndef rawhide_system - -#define rawhide_system 0 -#endif - - -#ifndef real_mm -// Page table translation vs 1-1 mapping -#define real_mm 1 -#endif - - -#ifndef rax_mode - -#define rax_mode 0 -#endif - -#ifndef egore -// End of reset flow starts a program at 200000(hex). -#define egore 1 -#endif - -#ifndef acore -// End of reset flow starts a program at 40000(hex). -#define acore 0 -#endif - - -// assume acore+egore+rax_mode lt 2 // Assertion checker - -#ifndef beh_model -// EV5 behavioral model specific code -#define beh_model 1 -#endif - -#ifndef init_cbox -// Reset flow init of Bcache and Scache -#define init_cbox 1 -#endif - -#ifndef disable_crd -// Decides whether the reset flow will disable -#define disable_crd 0 -#endif - - // correctable read interrupts via ICSR -#ifndef perfmon_debug -#define perfmon_debug 0 -#endif - -#ifndef icflush_on_tbix -#define icflush_on_tbix 0 -#endif - -#ifndef remove_restore_state -#define remove_restore_state 0 -#endif - -#ifndef remove_save_state -#define remove_save_state 0 -#endif - -#ifndef enable_physical_console -#define enable_physical_console 0 -#endif - -#ifndef ev5_p1 -#define ev5_p1 0 -#endif - -#ifndef ev5_p2 -#define ev5_p2 1 -#endif - -// assume ev5_p1+ev5_p2 eq 1 - -#ifndef ldvpte_bug_fix -#define ldvpte_bug_fix 1 // If set, fix ldvpte bug in dtbmiss_double flow. -#endif - -#ifndef spe_fix -// If set, disable super-page mode in user mode and re-enable -#define spe_fix 0 -#endif - // in kernel. Workaround for cpu bug. -#ifndef build_fixed_image -#define build_fixed_image 0 -#endif - - -#ifndef fill_err_hack -// If set, disable fill_error mode in user mode and re-enable -#define fill_err_hack 0 -#endif - - // in kernel. Workaround for cpu bug. - -// .macro hw_rei_spe -// .iif eq spe_fix, hw_rei -//#if spe_fix != 0 -// -// -//#define hw_rei_chm_count hw_rei_chm_count + 1 -// p4_fixup_label \hw_rei_chm_count -// .iif eq build_fixed_image, br r31, hw_rei_update_spe -// .iif ne build_fixed_image, hw_rei -//#endif -// -// .endm - -// Add flag "osf_chm_fix" to enable dcache in user mode only -// to avoid cpu bug. - -#ifndef osf_chm_fix -// If set, enable D-Cache in -#define osf_chm_fix 0 -#endif - -#if osf_chm_fix != 0 -// user mode only. -#define hw_rei_chm_count 0 -#endif - -#if osf_chm_fix != 0 - -#define hw_rei_stall_chm_count 0 -#endif - -#ifndef enable_p4_fixups - -#define enable_p4_fixups 0 -#endif - - // If set, do EV5 Pass 4 fixups -#if spe_fix == 0 - -#define osf_chm_fix 0 -#endif - -#if spe_fix == 0 - -#define enable_p4_fixups 0 -#endif - - // Only allow fixups if fix enabled - - //Turn off fill_errors and MEM_NEM in user mode -// .macro fill_error_hack ?L10_, ?L20_, ?L30_, ?L40_ -// //save r22,r23,r24 -// stqp r22, 0x150(r31) //add -// stqp r23, 0x158(r31) //contents -// stqp r24, 0x160(r31) //bit mask -// -// lda r22, 0x82(r31) -// ldah r22, 0x8740(r22) -// sll r22, 8, r22 -// ldlp r23, 0x80(r22) // r23 <- contents of CIA_MASK -// bis r23,r31,r23 -// -// lda r24, 0x8(r31) // r24 <- MEM_NEM bit -// beq r10, L10_ // IF user mode (r10<0> == 0) pal mode -// bic r23, r24, r23 // set fillerr_en bit -// br r31, L20_ // ELSE -//L10_: bis r23, r24, r23 // clear fillerr_en bit -//L20_: // ENDIF -// -// stlp r23, 0x80(r22) // write back the CIA_MASK register -// mb -// ldlp r23, 0x80(r22) -// bis r23,r31,r23 -// mb -// -// lda r22, 1(r31) // r22 <- 87.4000.0100 ptr to CIA_CTRL -// ldah r22, 0x8740(r22) -// sll r22, 8, r22 -// ldlp r23, 0(r22) // r23 <- contents of CIA_CTRL -// bis r23,r31,r23 -// -// -// lda r24, 0x400(r31) // r9 <- fillerr_en bit -// beq r10, L30_ // IF user mode (r10<0> == 0) pal mode -// bic r23, r24, r23 // set fillerr_en bit -// br r31, L40_ // ELSE -//L30_: bis r23, r24, r23 // clear fillerr_en bit -//L40_: // ENDIF -// -// stlp r23, 0(r22) // write back the CIA_CTRL register -// mb -// ldlp r23, 0(r22) -// bis r23,r31,r23 -// mb -// -// //restore r22,r23,r24 -// ldqp r22, 0x150(r31) -// ldqp r23, 0x158(r31) -// ldqp r24, 0x160(r31) -// -// .endm - // multiprocessor support can be enabled for a max of n processors by // setting the following to the number of processors on the system. // Note that this is really the max cpuid. +#define max_cpuid 1 #ifndef max_cpuid #define max_cpuid 8 #endif -#ifndef osf_svmin // platform specific palcode version number -#define osf_svmin 0 -#endif - - +#define osf_svmin 1 #define osfpal_version_h ((max_cpuid<<16) | (osf_svmin<<0)) -// .mcall ldqp // override macro64 definition with macro from library -// .mcall stqp // override macro64 definition with macro from library - - -// .psect _pal,mix -// huh pb pal_base: -// huh pb #define current_block_base . - pal_base - -// .sbttl "RESET - Reset Trap Entry Point" -//+ +// +// RESET - Reset Trap Entry Point +// // RESET - offset 0000 // Entry: // Vectored into via hardware trap on reset, or branched to @@ -650,30 +175,21 @@ SOFTWARE. // // Function: // -//- +// .text 0 . = 0x0000 + .globl _start .globl Pal_Base +_start: Pal_Base: HDW_VECTOR(PAL_RESET_ENTRY) Trap_Reset: nop -#ifdef SIMOS /* * store into r1 */ br r1,sys_reset -#else - /* following is a srcmax change */ - - DEBUGSTORE(0x41) - /* The original code jumped using r1 as a linkage register to pass the base - of PALcode to the platform specific code. We use r1 to pass a parameter - from the SROM, so we hardcode the address of Pal_Base in platform.s - */ - br r31, sys_reset -#endif // Specify PAL version info as a constant // at a known location (reset + 8). @@ -686,38 +202,11 @@ pal_impure_start: .quad 0 pal_debug_ptr: .quad 0 // reserved for debug pointer ; 20 -#if beh_model == 0 - - -#if enable_p4_fixups != 0 - - - .quad 0 - .long p4_fixup_hw_rei_fixup_table -#endif - -#else - - .quad 0 // - .quad 0 //0x0030 - .quad 0 - .quad 0 //0x0040 - .quad 0 - .quad 0 //0x0050 - .quad 0 - .quad 0 //0x0060 - .quad 0 -pal_enter_cns_address: - .quad 0 //0x0070 -- address to jump to from enter_console - .long <<sys_exit_console-pal_base>+1> //0x0078 -- offset to sys_exit_console (set palmode bit) -#endif - - -// .sbttl "IACCVIO- Istream Access Violation Trap Entry Point" - -//+ +// +// IACCVIO - Istream Access Violation Trap Entry Point +// // IACCVIO - offset 0080 // Entry: // Vectored into via hardware trap on Istream access violation or sign check error on PC. @@ -728,7 +217,7 @@ pal_enter_cns_address: // a1 <- MMCSR (1 for ACV) // a2 <- -1 (for ifetch fault) // vector via entMM -//- +// HDW_VECTOR(PAL_IACCVIO_ENTRY) Trap_Iaccvio: @@ -774,9 +263,9 @@ TRAP_IACCVIO_10_: hw_rei_spe -// .sbttl "INTERRUPT- Interrupt Trap Entry Point" - -//+ +// +// INTERRUPT - Interrupt Trap Entry Point +// // INTERRUPT - offset 0100 // Entry: // Vectored into via trap on hardware interrupt @@ -784,13 +273,11 @@ TRAP_IACCVIO_10_: // Function: // check for halt interrupt // check for passive release (current ipl geq requestor) -// if necessary, switch to kernel mode -// push stack frame, update ps (including current mode and ipl copies), sp, and gp +// if necessary, switch to kernel mode push stack frame, +// update ps (including current mode and ipl copies), sp, and gp // pass the interrupt info to the system module // -//- - - +// HDW_VECTOR(PAL_INTERRUPT_ENTRY) Trap_Interrupt: mfpr r13, ev5__intid // Fetch level of interruptor @@ -837,27 +324,19 @@ TRAP_INTERRUPT_10_: mfpr r12, pt_intmask and r11, osfps_m_ipl, r14 // Isolate just new ipl (not really needed, since all non-ipl bits zeroed already) -#ifdef SIMOS /* * Lance had space problems. We don't. */ extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL mfpr r29, pt_kgp // update gp mtpr r14, ev5__ipl // load the new IPL into Ibox -#else -// Moved the following three lines to sys_interrupt to make room for debug -// extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL -// mfpr r29, pt_kgp // update gp - -// mtpr r14, ev5__ipl // load the new IPL into Ibox -#endif br r31, sys_interrupt // Go handle interrupt -// .sbttl "ITBMISS- Istream TBmiss Trap Entry Point" - -//+ +// +// ITBMISS - Istream TBmiss Trap Entry Point +// // ITBMISS - offset 0180 // Entry: // Vectored into via hardware trap on Istream translation buffer miss. @@ -867,28 +346,11 @@ TRAP_INTERRUPT_10_: // Can trap into DTBMISS_DOUBLE. // This routine can use the PALshadow registers r8, r9, and r10 // -//- +// HDW_VECTOR(PAL_ITB_MISS_ENTRY) Trap_Itbmiss: -#if real_mm == 0 - - - // Simple 1-1 va->pa mapping - - nop // Pad to align to E1 - mfpr r8, exc_addr - - srl r8, page_offset_size_bits, r9 - sll r9, 32, r9 - - lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE - mtpr r9, itb_pte // E1 - - hw_rei_stall // Nital says I don't have to obey shadow wait rule here. -#else - - // Real MM mapping + // Real MM mapping nop mfpr r8, ev5__ifault_va_form // Get virtual address of PTE. @@ -913,50 +375,23 @@ pal_itb_ldq: hw_rei_stall // -#endif - - - -// .sbttl "DTBMISS_SINGLE - Dstream Single TBmiss Trap Entry Point" - -//+ +// +// DTBMISS_SINGLE - Dstream Single TBmiss Trap Entry Point +// // DTBMISS_SINGLE - offset 0200 // Entry: -// Vectored into via hardware trap on Dstream single translation buffer miss. +// Vectored into via hardware trap on Dstream single translation +// buffer miss. // // Function: // Do a virtual fetch of the PTE, and fill the DTB if the PTE is valid. // Can trap into DTBMISS_DOUBLE. // This routine can use the PALshadow registers r8, r9, and r10 -//- +// HDW_VECTOR(PAL_DTB_MISS_ENTRY) Trap_Dtbmiss_Single: -#if real_mm == 0 - // Simple 1-1 va->pa mapping - mfpr r8, va // E0 - srl r8, page_offset_size_bits, r9 - - sll r9, 32, r9 - lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE - - mtpr r9, dtb_pte // E0 - nop // Pad to align to E0 - - - - mtpr r8, dtb_tag // E0 - nop - - nop // Pad tag write - nop - - nop // Pad tag write - nop - - hw_rei -#else mfpr r8, ev5__va_form // Get virtual address of PTE - 1 cycle delay. E0. mfpr r10, exc_addr // Get PC of faulting instruction in case of error. E1. @@ -984,17 +419,16 @@ pal_dtb_ldq: mfpr r31, pt0 // Pad the write to dtb_tag hw_rei // Done, return -#endif - - -// .sbttl "DTBMISS_DOUBLE - Dstream Double TBmiss Trap Entry Point" - -//+ +// +// DTBMISS_DOUBLE - Dstream Double TBmiss Trap Entry Point +// +// // DTBMISS_DOUBLE - offset 0280 // Entry: -// Vectored into via hardware trap on Double TBmiss from single miss flows. +// Vectored into via hardware trap on Double TBmiss from single +// miss flows. // // r8 - faulting VA // r9 - original MMstat @@ -1009,16 +443,14 @@ pal_dtb_ldq: // pt4 and pt5 are reserved for this flow. // // -//- +// HDW_VECTOR(PAL_DOUBLE_MISS_ENTRY) Trap_Dtbmiss_double: -#if ldvpte_bug_fix != 0 mtpr r8, pt4 // save r8 to do exc_addr check mfpr r8, exc_addr blbc r8, Trap_Dtbmiss_Single //if not in palmode, should be in the single routine, dummy! mfpr r8, pt4 // restore r8 -#endif nop mtpr r22, pt5 // Get some scratch space. E1. // Due to virtual scheme, we can skip the first lookup and go @@ -1033,7 +465,7 @@ Trap_Dtbmiss_double: addq r21, r22, r21 // Index into page table for level 2 PTE. sll r8, (64-((1*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA - ldqp r21, 0(r21) // Get level 2 PTE (addr<2:0> ignored) + ldq_p r21, 0(r21) // Get level 2 PTE (addr<2:0> ignored) srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8 blbc r21, double_pte_inv // Check for Invalid PTE. @@ -1044,7 +476,7 @@ Trap_Dtbmiss_double: addq r21, r22, r21 // Index into page table for level 3 PTE. nop - ldqp r21, 0(r21) // Get level 3 PTE (addr<2:0> ignored) + ldq_p r21, 0(r21) // Get level 3 PTE (addr<2:0> ignored) blbc r21, double_pte_inv // Check for invalid PTE. mtpr r21, ev5__dtb_pte // Write the PTE. E0. @@ -1063,8 +495,9 @@ Trap_Dtbmiss_double: -// .sbttl "UNALIGN -- Dstream unalign trap" -//+ +// +// UNALIGN -- Dstream unalign trap +// // UNALIGN - offset 0300 // Entry: // Vectored into via hardware trap on unaligned Dstream reference. @@ -1075,7 +508,7 @@ Trap_Dtbmiss_double: // a1 <- Opcode // a2 <- src/dst register number // vector via entUna -//- +// HDW_VECTOR(PAL_UNALIGN_ENTRY) Trap_Unalign: @@ -1135,14 +568,13 @@ UNALIGN_NO_DISMISS_10_: br r31, unalign_trap_cont - - -// .sbttl "DFAULT - Dstream Fault Trap Entry Point" - -//+ +// +// DFAULT - Dstream Fault Trap Entry Point +// // DFAULT - offset 0380 // Entry: -// Vectored into via hardware trap on dstream fault or sign check error on DVA. +// Vectored into via hardware trap on dstream fault or sign check +// error on DVA. // // Function: // Ignore faults on FETCH/FETCH_M @@ -1153,7 +585,7 @@ UNALIGN_NO_DISMISS_10_: // a2 <- R/W // vector via entMM // -//- +// HDW_VECTOR(PAL_D_FAULT_ENTRY) Trap_Dfault: // DEBUGSTORE(0x48) @@ -1200,19 +632,16 @@ dfault_no_dismiss: br r31, dfault_trap_cont - - - -// .sbttl "MCHK - Machine Check Trap Entry Point" - -//+ +// +// MCHK - Machine Check Trap Entry Point +// // MCHK - offset 0400 // Entry: // Vectored into via hardware trap on machine check. // // Function: // -//- +// HDW_VECTOR(PAL_MCHK_ENTRY) Trap_Mchk: @@ -1221,11 +650,9 @@ Trap_Mchk: br r31, sys_machine_check - - -// .sbttl "OPCDEC - Illegal Opcode Trap Entry Point" - -//+ +// +// OPCDEC - Illegal Opcode Trap Entry Point +// // OPCDEC - offset 0480 // Entry: // Vectored into via hardware trap on illegal opcode. @@ -1236,7 +663,7 @@ Trap_Mchk: // a2 <- unpred // vector via entIF // -//- +// HDW_VECTOR(PAL_OPCDEC_ENTRY) Trap_Opcdec: @@ -1284,13 +711,9 @@ TRAP_OPCDEC_10_: hw_rei_spe // done, E1 - - - - -// .sbttl "ARITH - Arithmetic Exception Trap Entry Point" - -//+ +// +// ARITH - Arithmetic Exception Trap Entry Point +// // ARITH - offset 0500 // Entry: // Vectored into via hardware trap on arithmetic excpetion. @@ -1302,7 +725,7 @@ TRAP_OPCDEC_10_: // a2 <- unpred // vector via entArith // -//- +// HDW_VECTOR(PAL_ARITH_ENTRY) Trap_Arith: DEBUGSTORE(0x4b) @@ -1341,7 +764,7 @@ TRAP_ARITH_10_: lda sp, 0-osfsf_c_size(sp) // allocate stack space bis r25, r31, r11 // set new ps stq r16, osfsf_a0(sp) // save regs - srl r13, exc_sum_v_swc, r16// shift data to correct position + srl r13, exc_sum_v_swc, r16 // shift data to correct position stq r18, osfsf_a2(sp) // pvc_violate 354 // ok, but make sure reads of exc_mask/sum are not in same trap shadow @@ -1354,13 +777,9 @@ TRAP_ARITH_10_: lda sp, 0-osfsf_c_size(sp) // allocate stack space hw_rei_spe // done - E1 - - - - -// .sbttl "FEN - Illegal Floating Point Operation Trap Entry Point" - -//+ +// +// FEN - Illegal Floating Point Operation Trap Entry Point +// // FEN - offset 0580 // Entry: // Vectored into via hardware trap on illegal FP op. @@ -1372,7 +791,7 @@ TRAP_ARITH_10_: lda sp, 0-osfsf_c_size(sp) // allocate stack space // a2 <- unpred // vector via entIF // -//- +// HDW_VECTOR(PAL_FEN_ENTRY) Trap_Fen: @@ -1437,10 +856,12 @@ fen_to_opcdec: -// .sbttl "Misc handlers" - // Start area for misc code. -//+ -//dfault_trap_cont +////////////////////////////////////////////////////////////////////////////// +// Misc handlers - Start area for misc code. +////////////////////////////////////////////////////////////////////////////// + +// +// dfault_trap_cont // A dfault trap has been taken. The sp has been updated if necessary. // Push a stack frame a vector via entMM. // @@ -1449,7 +870,7 @@ fen_to_opcdec: // r13 - MMstat // VA - locked // -//- +// ALIGN_BLOCK dfault_trap_cont: lda sp, 0-osfsf_c_size(sp)// allocate stack space @@ -1479,7 +900,7 @@ dfault_trap_cont: hw_rei_spe // done -//+ +// //unalign_trap_cont // An unalign trap has been taken. Just need to finish up a few things. // @@ -1487,7 +908,7 @@ dfault_trap_cont: // r25 - entUna // r13 - shifted MMstat // -//- +// ALIGN_BLOCK unalign_trap_cont: mtpr r25, exc_addr // load exc_addr with entUna @@ -1501,7 +922,7 @@ unalign_trap_cont: -//+ +// // dfault_in_pal // Dfault trap was taken, exc_addr points to a PAL PC. // r9 - mmstat<opcode> right justified @@ -1523,7 +944,7 @@ unalign_trap_cont: // r11 - original PS // // -//- +// ALIGN_BLOCK dfault_in_pal: DEBUGSTORE(0x50) @@ -1531,8 +952,8 @@ dfault_in_pal: mfpr r9, pal_base mfpr r31, va // unlock VA -#if real_mm != 0 - // if not real_mm, should never get here from miss flows + + // if not real_mm, should never get here from miss flows subq r9, r8, r8 // pal_base - offset @@ -1543,7 +964,6 @@ dfault_in_pal: lda r9, pal_dtb_ldq-pal_base(r8) beq r9, dfault_do_bugcheck -#endif // // KSP invalid halt case -- @@ -1556,7 +976,6 @@ ksp_inval_halt: mtpr r31, ips mtpr r14, exc_addr // Set PC to instruction that caused trouble -//orig pvc_jsr updpcb, bsr=1 bsr r0, pal_update_pcb // update the pcb lda r0, hlt_c_ksp_inval(r31) // set halt code to hw halt @@ -1568,14 +987,14 @@ dfault_do_bugcheck: br r31, pal_pal_bug_check - ALIGN_BLOCK -//+ +// // dfault_fetch_ldr31_err - ignore faults on fetch(m) and loads to r31/f31 // On entry - // r14 - exc_addr // VA is locked // -//- +// + ALIGN_BLOCK dfault_fetch_ldr31_err: mtpr r11, ev5__dtb_cm mtpr r11, ev5__ps // Make sure ps hasn't changed @@ -1591,11 +1010,11 @@ dfault_fetch_ldr31_err: ALIGN_BLOCK -//+ +// // sys_from_kern // callsys from kernel mode - OS bugcheck machine check // -//- +// sys_from_kern: mfpr r14, exc_addr // PC points to call_pal subq r14, 4, r14 @@ -1604,15 +1023,15 @@ sys_from_kern: br r31, pal_pal_mchk -// .sbttl "Continuation of long call_pal flows" - ALIGN_BLOCK -//+ +// Continuation of long call_pal flows +// // wrent_tbl // Table to write *int in paltemps. // 4 instructions/entry // r16 has new value // -//- +// + ALIGN_BLOCK wrent_tbl: //orig pvc_jsr wrent, dest=1 nop @@ -1662,25 +1081,18 @@ wrent_tbl: hw_rei ALIGN_BLOCK -//+ +// // tbi_tbl // Table to do tbi instructions // 4 instructions per entry -//- +// tbi_tbl: // -2 tbia //orig pvc_jsr tbi, dest=1 mtpr r31, ev5__dtb_ia // Flush DTB mtpr r31, ev5__itb_ia // Flush ITB -#if icflush_on_tbix != 0 - - - br r31, pal_ic_flush // Flush Icache -#else - hw_rei_stall -#endif nop // Pad table @@ -1689,14 +1101,7 @@ tbi_tbl: mtpr r31, ev5__dtb_iap // Flush DTB mtpr r31, ev5__itb_iap // Flush ITB -#if icflush_on_tbix != 0 - - - br r31, pal_ic_flush // Flush Icache -#else - hw_rei_stall -#endif nop // Pad table @@ -1711,23 +1116,11 @@ tbi_tbl: // 1 tbisi //orig pvc_jsr tbi, dest=1 -#if icflush_on_tbix != 0 - - - - nop - br r31, pal_ic_flush_and_tbisi // Flush Icache - nop - nop // Pad table -#else nop nop mtpr r17, ev5__itb_is // Flush ITB hw_rei_stall -#endif - - // 2 tbisd //orig pvc_jsr tbi, dest=1 @@ -1741,25 +1134,19 @@ tbi_tbl: // 3 tbis //orig pvc_jsr tbi, dest=1 mtpr r17, ev5__dtb_is // Flush DTB -#if icflush_on_tbix != 0 - - - br r31, pal_ic_flush_and_tbisi // Flush Icache and ITB -#else br r31, tbi_finish ALIGN_BRANCH tbi_finish: mtpr r17, ev5__itb_is // Flush ITB hw_rei_stall -#endif ALIGN_BLOCK -//+ +// // bpt_bchk_common: // Finish up the bpt/bchk instructions -//- +// bpt_bchk_common: stq r18, osfsf_a2(sp) // a2 mfpr r13, pt_entif // get entry point @@ -1778,10 +1165,10 @@ bpt_bchk_common: ALIGN_BLOCK -//+ +// // rti_to_user // Finish up the rti instruction -//- +// rti_to_user: mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei @@ -1794,10 +1181,10 @@ rti_to_user: ALIGN_BLOCK -//+ +// // rti_to_kern // Finish up the rti instruction -//- +// rti_to_kern: and r12, osfps_m_ipl, r11 // clean ps mfpr r12, pt_intmask // get int mask @@ -1812,36 +1199,17 @@ rti_to_kern: hw_rei ALIGN_BLOCK -//+ +// // swpctx_cont // Finish up the swpctx instruction -//- +// swpctx_cont: -#if ev5_p1 != 0 - - - bic r25, r24, r25 // clean icsr<FPE> - get_impure r8 // get impure pointer - - sll r12, icsr_v_fpe, r12 // shift new fen to pos - fix_impure_ipr r8 // adjust impure pointer - - restore_reg1 pmctr_ctl, r8, r8, ipr=1 // "ldqp" - get pmctr_ctl bits - srl r23, 32, r24 // move asn to low asn pos - - ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr - srl r22, osfpcb_v_pme, r22 // get pme down to bit 0 - - or r25, r12, r25 // icsr with new fen - sll r24, itb_asn_v_asn, r12 - -#else bic r25, r24, r25 // clean icsr<FPE,PMP> sll r12, icsr_v_fpe, r12 // shift new fen to pos - ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr + ldq_p r14, osfpcb_q_mmptr(r16)// get new mmptr srl r22, osfpcb_v_pme, r22 // get pme down to bit 0 or r25, r12, r25 // icsr with new fen @@ -1854,7 +1222,6 @@ swpctx_cont: nop or r25, r22, r25 // icsr with new pme -#endif sll r24, dtb_asn_v_asn, r24 @@ -1865,85 +1232,24 @@ swpctx_cont: mtpr r25, icsr // write the icsr sll r14, page_offset_size_bits, r14 // Move PTBR into internal position. - ldqp r25, osfpcb_q_usp(r16) // get new usp + ldq_p r25, osfpcb_q_usp(r16) // get new usp insll r13, 4, r13 // >> 32 -// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow +// pvc_violate 379 // ldq_p can't trap except replay. only problem if mf same ipr in same shadow mtpr r14, pt_ptbr // load the new ptbr mtpr r13, cc // set new offset - ldqp r30, osfpcb_q_ksp(r16) // get new ksp + ldq_p r30, osfpcb_q_ksp(r16) // get new ksp -// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow +// pvc_violate 379 // ldq_p can't trap except replay. only problem if mf same ipr in same shadow mtpr r25, pt_usp // save usp -#if ev5_p1 != 0 - - - blbc r8, no_pm_change // if monitoring all processes -- no need to change pm - - // otherwise, monitoring select processes - update pm - lda r25, 0x3F(r31) - cmovlbc r22, r31, r8 // if pme set, disable counters, otherwise use saved encodings - - sll r25, pmctr_v_ctl2, r25 // create ctl field bit mask - mfpr r22, ev5__pmctr - - and r8, r25, r8 // mask new ctl value - bic r22, r25, r22 // clear ctl field in pmctr - - or r8, r22, r8 - mtpr r8, ev5__pmctr - -no_pm_change: -#endif - - -#if osf_chm_fix != 0 - - - p4_fixup_hw_rei_stall // removes this section for Pass 4 by placing a hw_rei_stall here - -#if build_fixed_image != 0 - - - hw_rei_stall -#else - - mfpr r9, pt_pcbb // get FEN -#endif - - ldqp r9, osfpcb_q_fen(r9) - blbc r9, no_pm_change_10_ // skip if FEN disabled - - mb // ensure no outstanding fills - lda r12, 1<<dc_mode_v_dc_ena(r31) - mtpr r12, dc_mode // turn dcache on so we can flush it - nop // force correct slotting - mfpr r31, pt0 // no mbox instructions in 1,2,3,4 - mfpr r31, pt0 // no mbox instructions in 1,2,3,4 - mfpr r31, pt0 // no mbox instructions in 1,2,3,4 - mfpr r31, pt0 // no mbox instructions in 1,2,3,4 - - lda r8, 0(r31) // flood the dcache with junk data -no_pm_change_5_: ldqp r31, 0(r8) - lda r8, 0x20(r8) // touch each cache block - srl r8, 13, r9 - blbc r9, no_pm_change_5_ - - mb // ensure no outstanding fills - mtpr r31, dc_mode // turn the dcache back off - nop // force correct slotting - mfpr r31, pt0 // no hw_rei_stall in 0,1 -#endif - - no_pm_change_10_: hw_rei_stall // back we go ALIGN_BLOCK -//+ +// // swppal_cont - finish up the swppal call_pal -//- +// swppal_cont: mfpr r2, pt_misc // get misc bits @@ -1976,7 +1282,7 @@ swppal_fail: // .sbttl "Memory management" ALIGN_BLOCK -//+ +// //foe_ipte_handler // IFOE detected on level 3 pte, sort out FOE vs ACV // @@ -1988,7 +1294,7 @@ swppal_fail: // Function // Determine TNV vs ACV vs FOE. Build stack and dispatch // Will not be here if TNV. -//- +// foe_ipte_handler: sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit @@ -2036,7 +1342,7 @@ foe_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0> hw_rei_spe // out to exec ALIGN_BLOCK -//+ +// //invalid_ipte_handler // TNV detected on level 3 pte, sort out TNV vs ACV // @@ -2047,7 +1353,7 @@ foe_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0> // // Function // Determine TNV vs ACV. Build stack and dispatch. -//- +// invalid_ipte_handler: sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit @@ -2098,7 +1404,7 @@ invalid_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0> ALIGN_BLOCK -//+ +// //invalid_dpte_handler // INVALID detected on level 3 pte, sort out TNV vs ACV // @@ -2111,7 +1417,7 @@ invalid_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0> // // Function // Determine TNV vs ACV. Build stack and dispatch -//- +// invalid_dpte_handler: @@ -2185,14 +1491,14 @@ invalid_dpte_no_dismiss_10_: srl r8, osfpte_v_kre, r12 // get kre to <0> hw_rei_spe // out to exec -//+ +// // // We come here if we are erring on a dtb_miss, and the instr is a // fetch, fetch_m, of load to r31/f31. // The PC is incremented, and we return to the program. // essentially ignoring the instruction and error. // -//- +// ALIGN_BLOCK nmiss_fetch_ldr31_err: mfpr r12, pt6 @@ -2204,7 +1510,7 @@ nmiss_fetch_ldr31_err: hw_rei // ALIGN_BLOCK -//+ +// // double_pte_inv // We had a single tbmiss which turned into a double tbmiss which found // an invalid PTE. Return to single miss with a fake pte, and the invalid @@ -2222,7 +1528,7 @@ nmiss_fetch_ldr31_err: // r8 fake PTE // // -//- +// double_pte_inv: srl r21, osfpte_v_kre, r21 // get the kre bit to <0> mfpr r22, exc_addr // get the pc @@ -2239,13 +1545,13 @@ double_pte_inv: hw_rei // back to tb miss ALIGN_BLOCK -//+ +// //tnv_in_pal // The only places in pal that ld or store are the // stack builders, rti or retsys. Any of these mean we // need to take a ksp not valid halt. // -//- +// tnv_in_pal: @@ -2255,11 +1561,11 @@ tnv_in_pal: // .sbttl "Icache flush routines" ALIGN_BLOCK -//+ +// // Common Icache flush routine. // // -//- +// pal_ic_flush: nop mtpr r31, ev5__ic_flush_ctl // Icache flush - E1 @@ -2327,94 +1633,8 @@ one_cycle_and_hw_rei: hw_rei_stall -#if icflush_on_tbix != 0 - - ALIGN_BLOCK - -//+ -// Common Icache flush and ITB invalidate single routine. -// ITBIS and hw_rei_stall must be in same octaword. -// r17 - has address to invalidate // -//- -PAL_IC_FLUSH_AND_TBISI: - nop - mtpr r31, ev5__ic_flush_ctl // Icache flush - E1 - nop - nop - -// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20) - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 10 - - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 20 - - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 30 - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 40 - - - nop - nop - - nop - nop - - // A quadword is 64 bits, so an octaword is 128 bits -> 16 bytes -> 4 instructions - // 44 nops plus 4 instructions before it is 48 instructions. - // Since this routine started on a 32-byte (8 instruction) boundary, - // the following 2 instructions will be in the same octword as required. -// ALIGN_BRANCH - mtpr r17, ev5__itb_is // Flush ITB - hw_rei_stall - -#endif - - ALIGN_BLOCK -//+ //osfpal_calpal_opcdec // Here for all opcdec CALL_PALs // @@ -2424,7 +1644,7 @@ PAL_IC_FLUSH_AND_TBISI: // a2 <- unpred // vector via entIF // -//- +// osfpal_calpal_opcdec: sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit @@ -2473,12 +1693,12 @@ osfpal_calpal_opcdec_10_: -//+ +// //pal_update_pcb // Update the PCB with the current SP, AST, and CC info // // r0 - return linkage -//- +// ALIGN_BLOCK pal_update_pcb: @@ -2486,25 +1706,20 @@ pal_update_pcb: and r11, osfps_m_mode, r25 // get mode beq r25, pal_update_pcb_10_ // in kern? no need to update user sp mtpr r30, pt_usp // save user stack - stqp r30, osfpcb_q_usp(r12) // store usp + stq_p r30, osfpcb_q_usp(r12) // store usp br r31, pal_update_pcb_20_ // join common -pal_update_pcb_10_: stqp r30, osfpcb_q_ksp(r12) // store ksp +pal_update_pcb_10_: stq_p r30, osfpcb_q_ksp(r12) // store ksp pal_update_pcb_20_: rpcc r13 // get cyccounter srl r13, 32, r14 // move offset addl r13, r14, r14 // merge for new time - stlp r14, osfpcb_l_cc(r12) // save time + stl_p r14, osfpcb_l_cc(r12) // save time //orig pvc_jsr updpcb, bsr=1, dest=1 ret r31, (r0) - -#if remove_save_state == 0 - -// .sbttl "PAL_SAVE_STATE" -//+ // -// Pal_save_state +// pal_save_state // // Function // All chip state saved, all PT's, SR's FR's, IPR's @@ -2525,8 +1740,7 @@ pal_update_pcb_20_: rpcc r13 // get cyccounter // r3 = return_address // r4 = scratch // -//- - +// ALIGN_BLOCK .globl pal_save_state @@ -2581,24 +1795,18 @@ pal_save_state: // Get out of shadow mode // - mfpr r2, icsr // Get icsr //orig -//orig ldah r0, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location + mfpr r2, icsr // Get icsr ldah r0, (1<<(icsr_v_sde-16))(r31) - bic r2, r0, r0 // ICSR with SDE clear //orig - mtpr r0, icsr // Turn off SDE //orig + bic r2, r0, r0 // ICSR with SDE clear + mtpr r0, icsr // Turn off SDE - mfpr r31, pt0 // SDE bubble cycle 1 //orig - mfpr r31, pt0 // SDE bubble cycle 2 //orig - mfpr r31, pt0 // SDE bubble cycle 3 //orig - nop //orig + mfpr r31, pt0 // SDE bubble cycle 1 + mfpr r31, pt0 // SDE bubble cycle 2 + mfpr r31, pt0 // SDE bubble cycle 3 + nop // save integer regs R4-r31 -//orig #define t 4 -//orig .repeat 28 -//orig store_reg \t -//orig #define t t + 1 -//orig .endr SAVE_GPR(r4,CNS_Q_GPR+0x20,r1) SAVE_GPR(r5,CNS_Q_GPR+0x28,r1) SAVE_GPR(r6,CNS_Q_GPR+0x30,r1) @@ -2632,11 +1840,6 @@ pal_save_state: //orig unfix_impure_gpr r1 // adjust impure area pointer for gpr stores //orig fix_impure_ipr r1 // adjust impure area pointer for pt stores -//orig #define t 1 -//orig .repeat 23 -//orig store_reg \t , pal=1 -//orig #define t t + 1 -//orig .endr lda r1, -0x200(r1) // Restore the impure base address. lda r1, CNS_Q_IPR(r1) // Point to the base of IPR area. @@ -2666,24 +1869,16 @@ pal_save_state: SAVE_IPR(pt23,CNS_Q_PT+0xB8,r1) // Restore shadow mode - mfpr r31, pt0 // pad write to icsr out of shadow of store (trap does not abort write) //orig - mfpr r31, pt0 //orig - mtpr r2, icsr // Restore original ICSR //orig + mfpr r31, pt0 // pad write to icsr out of shadow of store (trap does not abort write) + mfpr r31, pt0 + mtpr r2, icsr // Restore original ICSR - mfpr r31, pt0 // SDE bubble cycle 1 //orig - mfpr r31, pt0 // SDE bubble cycle 2 //orig - mfpr r31, pt0 // SDE bubble cycle 3 //orig - nop //orig + mfpr r31, pt0 // SDE bubble cycle 1 + mfpr r31, pt0 // SDE bubble cycle 2 + mfpr r31, pt0 // SDE bubble cycle 3 + nop // save all integer shadow regs - -//orig #define t 8 -//orig .repeat 7 -//orig store_reg \t, shadow=1 -//orig #define t t + 1 -//orig .endr -//orig store_reg 25, shadow=1 - SAVE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code SAVE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1) SAVE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1) @@ -2693,22 +1888,6 @@ pal_save_state: SAVE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1) SAVE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1) -//orig store_reg exc_addr, ipr=1 // save ipr -//orig store_reg pal_base, ipr=1 // save ipr -//orig store_reg mm_stat, ipr=1 // save ipr -//orig store_reg va, ipr=1 // save ipr -//orig store_reg icsr, ipr=1 // save ipr -//orig store_reg ipl, ipr=1 // save ipr -//orig store_reg ps, ipr=1 // save ipr -//orig store_reg itb_asn, ipr=1 // save ipr -//orig store_reg aster, ipr=1 // save ipr -//orig store_reg astrr, ipr=1 // save ipr -//orig store_reg sirr, ipr=1 // save ipr -//orig store_reg isr, ipr=1 // save ipr -//orig store_reg ivptbr, ipr=1 // save ipr -//orig store_reg mcsr, ipr=1 // save ipr -//orig store_reg dc_mode, ipr=1 // save ipr - SAVE_IPR(excAddr,CNS_Q_EXC_ADDR,r1) SAVE_IPR(palBase,CNS_Q_PAL_BASE,r1) SAVE_IPR(mmStat,CNS_Q_MM_STAT,r1) @@ -2734,18 +1913,6 @@ pvc$osf35$379: // loads. HW_ST ok here, so ignore //the following iprs are informational only -- will not be restored -//orig store_reg icperr_stat, ipr=1 -//orig store_reg pmctr, ipr=1 -//orig store_reg intid, ipr=1 -//orig store_reg exc_sum, ipr=1 -//orig store_reg exc_mask, ipr=1 -//orig ldah r14, 0xfff0(r31) -//orig zap r14, 0xE0, r14 // Get Cbox IPR base -//orig nop // pad mf dcperr_stat out of shadow of last store -//orig nop -//orig nop -//orig store_reg dcperr_stat, ipr=1 - SAVE_IPR(icPerr,CNS_Q_ICPERR_STAT,r1) SAVE_IPR(PmCtr,CNS_Q_PM_CTR,r1) SAVE_IPR(intId,CNS_Q_INT_ID,r1) @@ -2760,21 +1927,6 @@ pvc$osf35$379: // loads. HW_ST ok here, so ignore // read cbox ipr state -//orig mb -//orig ldqp r2, ev5__sc_ctl(r14) -//orig ldqp r13, ld_lock(r14) -//orig ldqp r4, ev5__sc_addr(r14) -//orig ldqp r5, ev5__ei_addr(r14) -//orig ldqp r6, ev5__bc_tag_addr(r14) -//orig ldqp r7, ev5__fill_syn(r14) -//orig bis r5, r4, r31 -//orig bis r7, r6, r31 // make sure previous loads finish before reading stat registers which unlock them -//orig ldqp r8, ev5__sc_stat(r14) // unlocks sc_stat,sc_addr -//orig ldqp r9, ev5__ei_stat(r14) // may unlock ei_*, bc_tag_addr, fill_syn -//orig ldqp r31, ev5__ei_stat(r14) // ensures it is really unlocked -//orig mb - -#ifndef SIMOS mb ldq_p r2, scCtl(r14) ldq_p r13, ldLock(r14) @@ -2788,18 +1940,8 @@ pvc$osf35$379: // loads. HW_ST ok here, so ignore ldq_p r9, eiStat(r14) // Unlocks eiAddr, bcTagAddr, fillSyn. ldq_p zero, eiStat(r14) // Make sure it is really unlocked. mb -#endif -//orig // save cbox ipr state -//orig store_reg1 sc_ctl, r2, r1, ipr=1 -//orig store_reg1 ld_lock, r13, r1, ipr=1 -//orig store_reg1 sc_addr, r4, r1, ipr=1 -//orig store_reg1 ei_addr, r5, r1, ipr=1 -//orig store_reg1 bc_tag_addr, r6, r1, ipr=1 -//orig store_reg1 fill_syn, r7, r1, ipr=1 -//orig store_reg1 sc_stat, r8, r1, ipr=1 -//orig store_reg1 ei_stat, r9, r1, ipr=1 -//orig //bc_config? sl_rcv? + // save cbox ipr state SAVE_SHADOW(r2,CNS_Q_SC_CTL,r1); SAVE_SHADOW(r13,CNS_Q_LD_LOCK,r1); SAVE_SHADOW(r4,CNS_Q_SC_ADDR,r1); @@ -2808,29 +1950,20 @@ pvc$osf35$379: // loads. HW_ST ok here, so ignore SAVE_SHADOW(r7,CNS_Q_FILL_SYN,r1); SAVE_SHADOW(r8,CNS_Q_SC_STAT,r1); SAVE_SHADOW(r9,CNS_Q_EI_STAT,r1); + //bc_config? sl_rcv? -// restore impure base //orig +// restore impure base //orig unfix_impure_ipr r1 lda r1, -CNS_Q_IPR(r1) -// save all floating regs //orig - mfpr r0, icsr // get icsr //orig - or r31, 1, r2 // get a one //orig -//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot //orig +// save all floating regs + mfpr r0, icsr // get icsr + or r31, 1, r2 // get a one sll r2, icsr_v_fpe, r2 // Shift it into ICSR<FPE> position - or r2, r0, r0 // set FEN on //orig - mtpr r0, icsr // write to icsr, enabling FEN //orig + or r2, r0, r0 // set FEN on + mtpr r0, icsr // write to icsr, enabling FEN // map the save area virtually -// orig mtpr r31, dtb_ia // clear the dtb -// orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA -// orig sll r0, 32, r0 // shift to PFN field -// orig lda r2, 0xff(r31) // all read enable and write enable bits set -// orig sll r2, 8, r2 // move to PTE location -// orig addq r0, r2, r0 // combine with PFN -// orig mtpr r0, dtb_pte // Load PTE and set TB valid bit -// orig mtpr r1, dtb_tag // write TB tag - mtpr r31, dtbIa // Clear all DTB entries srl r1, va_s_off, r0 // Clean off byte-within-page offset sll r0, pte_v_pfn, r0 // Shift to form PFN @@ -2839,16 +1972,7 @@ pvc$osf35$379: // loads. HW_ST ok here, so ignore mtpr r1, dtbTag // Write the PTE and tag into the DTB -//orig // map the next page too - in case the impure area crosses a page boundary -//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page -//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA -//orig sll r0, 32, r0 // shift to PFN field -//orig lda r2, 0xff(r31) // all read enable and write enable bits set -//orig sll r2, 8, r2 // move to PTE location -//orig addq r0, r2, r0 // combine with PFN -//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit -//orig mtpr r4, dtb_tag // write TB tag - +// map the next page too - in case the impure area crosses a page boundary lda r4, (1<<va_s_off)(r1) // Generate address for next page srl r4, va_s_off, r0 // Clean off byte-within-page offset sll r0, pte_v_pfn, r0 // Shift to form PFN @@ -2856,24 +1980,16 @@ pvc$osf35$379: // loads. HW_ST ok here, so ignore mtpr r0, dtbPte // Load the PTE and set valid mtpr r4, dtbTag // Write the PTE and tag into the DTB - sll r31, 0, r31 // stall cycle 1 // orig - sll r31, 0, r31 // stall cycle 2 // orig - sll r31, 0, r31 // stall cycle 3 // orig - nop // orig + sll r31, 0, r31 // stall cycle 1 + sll r31, 0, r31 // stall cycle 2 + sll r31, 0, r31 // stall cycle 3 + nop -//orig // add offset for saving fpr regs +// add offset for saving fpr regs //orig fix_impure_gpr r1 - lda r1, 0x200(r1) // Point to center of CPU segment // now save the regs - F0-F31 - -//orig #define t 0 -//orig .repeat 32 -//orig store_reg \t , fpu=1 -//orig #define t t + 1 -//orig .endr - mf_fpcr f0 // original SAVE_FPR(f0,CNS_Q_FPR+0x00,r1) @@ -2909,15 +2025,15 @@ pvc$osf35$379: // loads. HW_ST ok here, so ignore SAVE_FPR(f30,CNS_Q_FPR+0xF0,r1) SAVE_FPR(f31,CNS_Q_FPR+0xF8,r1) -//orig //switch impure offset from gpr to ipr--- +//switch impure offset from gpr to ipr--- //orig unfix_impure_gpr r1 //orig fix_impure_ipr r1 //orig store_reg1 fpcsr, f0, r1, fpcsr=1 - SAVE_FPR(f0,CNS_Q_FPCSR,r1) // fpcsr loaded above into f0 -- can it reach// pb + SAVE_FPR(f0,CNS_Q_FPCSR,r1) // fpcsr loaded above into f0 -- can it reach lda r1, -0x200(r1) // Restore the impure base address -//orig // and back to gpr --- +// and back to gpr --- //orig unfix_impure_ipr r1 //orig fix_impure_gpr r1 @@ -2941,23 +2057,20 @@ pvc$osf35$379: // loads. HW_ST ok here, so ignore SAVE_GPR(r0,CNS_Q_FLAG,r1) // // set dump area valid flag mb -//orig // restore impure area base + // restore impure area base //orig unfix_impure_gpr r1 lda r1, -0x200(r1) // Point to center of CPU segment - mtpr r31, dtb_ia // clear the dtb //orig - mtpr r31, itb_ia // clear the itb //orig + mtpr r31, dtb_ia // clear the dtb + mtpr r31, itb_ia // clear the itb //orig pvc_jsr savsta, bsr=1, dest=1 ret r31, (r3) // and back we go -#endif -#if remove_restore_state == 0 - // .sbttl "PAL_RESTORE_STATE" -//+ +// // // Pal_restore_state // @@ -2972,24 +2085,13 @@ pvc$osf35$379: // loads. HW_ST ok here, so ignore // All chip state restored, all SRs, FRs, PTs, IPRs // *** except R1, R3, PT0, PT4, PT5 *** // -//- +// ALIGN_BLOCK pal_restore_state: //need to restore sc_ctl,bc_ctl,bc_config??? if so, need to figure out a safe way to do so. -//orig // map the console io area virtually -//orig mtpr r31, dtb_ia // clear the dtb -//orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA -//orig sll r0, 32, r0 // shift to PFN field -//orig lda r2, 0xff(r31) // all read enable and write enable bits set -//orig sll r2, 8, r2 // move to PTE location -//orig addq r0, r2, r0 // combine with PFN -//orig -//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit -//orig mtpr r1, dtb_tag // write TB tag -//orig - +// map the console io area virtually mtpr r31, dtbIa // Clear all DTB entries srl r1, va_s_off, r0 // Clean off byte-within-page offset sll r0, pte_v_pfn, r0 // Shift to form PFN @@ -2998,17 +2100,7 @@ pal_restore_state: mtpr r1, dtbTag // Write the PTE and tag into the DTB -//orig // map the next page too, in case impure area crosses page boundary -//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page -//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA -//orig sll r0, 32, r0 // shift to PFN field -//orig lda r2, 0xff(r31) // all read enable and write enable bits set -//orig sll r2, 8, r2 // move to PTE location -//orig addq r0, r2, r0 // combine with PFN -//orig -//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit -//orig mtpr r4, dtb_tag // write TB tag - no virtual mbox instruction for 3 cycles - +// map the next page too, in case impure area crosses page boundary lda r4, (1<<VA_S_OFF)(r1) // Generate address for next page srl r4, va_s_off, r0 // Clean off byte-within-page offset sll r0, pte_v_pfn, r0 // Shift to form PFN @@ -3016,14 +2108,7 @@ pal_restore_state: mtpr r0, dtbPte // Load the PTE and set valid mtpr r4, dtbTag // Write the PTE and tag into the DTB -//orig // save all floating regs -//orig mfpr r0, icsr // get icsr -//orig// assume ICSR_V_SDE gt <ICSR_V_FPE> // assertion checker -//orig or r31, <<1@<ICSR_V_SDE-ICSR_V_FPE>> ! 1>, r2 // set SDE and FPE -//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot -//orig or r2, r0, r0 // set FEN on -//orig mtpr r0, icsr // write to icsr, enabling FEN and SDE. 3 bubbles to floating instr. - +// save all floating regs mfpr r0, icsr // Get current ICSR bis zero, 1, r2 // Get a '1' or r2, (1<<(icsr_v_sde-icsr_v_fpe)), r2 @@ -3041,19 +2126,13 @@ pal_restore_state: //orig //orig unfix_impure_ipr r1 //orig fix_impure_gpr r1 // adjust impure pointer offset for gpr access -//orig -//orig // restore all floating regs -//orig#define t 0 -//orig .repeat 32 -//orig restore_reg \t , fpu=1 -//orig#define t t + 1 -//orig .endr - lda r1, 200(r1) // Point to base of IPR area again RESTORE_FPR(f0,CNS_Q_FPCSR,r1) // can it reach?? pb mt_fpcr f0 // original lda r1, 0x200(r1) // point to center of CPU segment + +// restore all floating regs RESTORE_FPR(f0,CNS_Q_FPR+0x00,r1) RESTORE_FPR(f1,CNS_Q_FPR+0x08,r1) RESTORE_FPR(f2,CNS_Q_FPR+0x10,r1) @@ -3087,19 +2166,13 @@ pal_restore_state: RESTORE_FPR(f30,CNS_Q_FPR+0xF0,r1) RESTORE_FPR(f31,CNS_Q_FPR+0xF8,r1) -//orig // switch impure pointer from gpr to ipr area -- +// switch impure pointer from gpr to ipr area -- //orig unfix_impure_gpr r1 //orig fix_impure_ipr r1 -//orig -//orig // restore all pal regs -//orig#define t 1 -//orig .repeat 23 -//orig restore_reg \t , pal=1 -//orig#define t t + 1 -//orig .endr - lda r1, -0x200(r1) // Restore base address of impure area. lda r1, CNS_Q_IPR(r1) // Point to base of IPR area. + +// restore all pal regs RESTORE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle RESTORE_IPR(pt1,CNS_Q_PT+0x08,r1) RESTORE_IPR(pt2,CNS_Q_PT+0x10,r1) @@ -3173,14 +2246,6 @@ pal_restore_state: // restore all integer shadow regs -//orig#define t 8 -//orig .repeat 7 -//orig restore_reg \t, shadow=1 -//orig#define t t + 1 -//orig .endr -//orig restore_reg 25, shadow=1 -//orig restore_reg dc_mode, ipr=1 // no mbox instructions for 4 cycles - RESTORE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code RESTORE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1) RESTORE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1) @@ -3195,34 +2260,28 @@ pal_restore_state: // Get out of shadow mode // - mfpr r31, pt0 // pad last load to icsr write (in case of replay, icsr will be written anyway) //orig - mfpr r31, pt0 // "" //orig - mfpr r0, icsr // Get icsr //orig -//orig ldah r2, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location - ldah r2, (1<<(ICSR_V_SDE-16))(r31) // Get a one in SHADOW_ENABLE bit location //orig - bic r0, r2, r2 // ICSR with SDE clear //orig - mtpr r2, icsr // Turn off SDE - no palshadow rd/wr for 3 bubble cycles //orig + mfpr r31, pt0 // pad last load to icsr write (in case of replay, icsr will be written anyway) + mfpr r31, pt0 // "" + mfpr r0, icsr // Get icsr + ldah r2, (1<<(ICSR_V_SDE-16))(r31) // Get a one in SHADOW_ENABLE bit location + bic r0, r2, r2 // ICSR with SDE clear + mtpr r2, icsr // Turn off SDE - no palshadow rd/wr for 3 bubble cycles - mfpr r31, pt0 // SDE bubble cycle 1 //orig - mfpr r31, pt0 // SDE bubble cycle 2 //orig - mfpr r31, pt0 // SDE bubble cycle 3 //orig - nop //orig + mfpr r31, pt0 // SDE bubble cycle 1 + mfpr r31, pt0 // SDE bubble cycle 2 + mfpr r31, pt0 // SDE bubble cycle 3 + nop -//orig // switch impure pointer from ipr to gpr area -- +// switch impure pointer from ipr to gpr area -- //orig unfix_impure_ipr r1 //orig fix_impure_gpr r1 -//orig // restore all integer regs -//orig#define t 4 -//orig .repeat 28 -//orig restore_reg \t -//orig#define t t + 1 -//orig .endr // Restore GPRs (r0, r2 are restored later, r1 and r3 are trashed) ... lda r1, -CNS_Q_IPR(r1) // Restore base address of impure area lda r1, 0x200(r1) // Point to center of CPU segment + // restore all integer regs RESTORE_GPR(r4,CNS_Q_GPR+0x20,r1) RESTORE_GPR(r5,CNS_Q_GPR+0x28,r1) RESTORE_GPR(r6,CNS_Q_GPR+0x30,r1) @@ -3284,17 +2343,16 @@ pal_restore_state: RESTORE_GPR(r0,CNS_Q_GPR+0x00,r1) lda r1, -0x200(r1) // Restore impure base address - mfpr r31, pt0 // stall for ldqp above //orig + mfpr r31, pt0 // stall for ldq_p above //orig mtpr r31, dtb_ia // clear the tb //orig mtpr r31, itb_ia // clear the itb //orig //orig pvc_jsr rststa, bsr=1, dest=1 ret r31, (r3) // back we go //orig -#endif -//+ +// // pal_pal_bug_check -- code has found a bugcheck situation. // Set things up and join common machine check flow. // @@ -3312,7 +2370,7 @@ pal_restore_state: // pt_misc<31:16> - scb vector // r14 - base of Cbox IPRs in IO space // MCES<mchk> is set -//- +// ALIGN_BLOCK .globl pal_pal_bug_check_from_int @@ -3361,11 +2419,13 @@ pal_pal_mchk: br r31, sys_mchk_collect_iprs // Join common machine check flow -// align_to_call_pal_section // Align to address of first call_pal entry point - 2000 -// .sbttl "HALT - PALcode for HALT instruction" -//+ +// align_to_call_pal_section +// Align to address of first call_pal entry point - 2000 + +// +// HALT - PALcode for HALT instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -3373,13 +2433,12 @@ pal_pal_mchk: // Function: // GO to console code // -//- +// .text 1 // . = 0x2000 CALL_PAL_PRIV(PAL_HALT_ENTRY) call_pal_halt: -#if rax_mode == 0 mfpr r31, pt0 // Pad exc_addr read mfpr r31, pt0 @@ -3394,29 +2453,8 @@ call_pal_halt: lda r0, hlt_c_sw_halt(r31) // set halt code to sw halt br r31, sys_enter_console // enter the console -#else // RAX mode - mb - mb - mtpr r9, ev5__dtb_asn // no Dstream virtual ref for next 3 cycles. - mtpr r9, ev5__itb_asn // E1. Update ITB ASN. No hw_rei for 5 cycles. - mtpr r8, exc_addr // no HW_REI for 1 cycle. - blbc r9, not_begin_case - mtpr r31, ev5__dtb_ia // clear DTB. No Dstream virtual ref for 2 cycles. - mtpr r31, ev5__itb_ia // clear ITB. - -not_begin_case: - nop - nop - - nop - nop // pad mt itb_asn ->hw_rei_stall - - hw_rei_stall -#endif - -// .sbttl "CFLUSH- PALcode for CFLUSH instruction" - -//+ +// +// CFLUSH - PALcode for CFLUSH instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -3427,14 +2465,14 @@ not_begin_case: // Flush all Dstream caches of 1 entire page // The CFLUSH routine is in the system specific module. // -//- +// CALL_PAL_PRIV(PAL_CFLUSH_ENTRY) Call_Pal_Cflush: br r31, sys_cflush -// .sbttl "DRAINA - PALcode for DRAINA instruction" -//+ +// +// DRAINA - PALcode for DRAINA instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -3445,7 +2483,7 @@ Call_Pal_Cflush: // complete without incurring aborts. For the EV5 implementation, this // means waiting until all pending DREADS are returned. // -//- +// CALL_PAL_PRIV(PAL_DRAINA_ENTRY) Call_Pal_Draina: @@ -3467,7 +2505,7 @@ DRAINA_LOOP: DRAINA_LOOP_TOO_LONG: br r31, call_pal_halt -// .sbttl "CALL_PAL OPCDECs" +// CALL_PAL OPCDECs CALL_PAL_PRIV(0x0003) CallPal_OpcDec03: @@ -3493,8 +2531,8 @@ CallPal_OpcDec07: CallPal_OpcDec08: br r31, osfpal_calpal_opcdec -// .sbttl "CSERVE- PALcode for CSERVE instruction" -//+ +// +// CSERVE - PALcode for CSERVE instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -3506,15 +2544,14 @@ CallPal_OpcDec08: // arguments in r16.... // The CSERVE routine is in the system specific module. // -//- +// CALL_PAL_PRIV(PAL_CSERVE_ENTRY) Call_Pal_Cserve: br r31, sys_cserve -// .sbttl "swppal - PALcode for swppal instruction" - -//+ +// +// swppal - PALcode for swppal instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -3530,7 +2567,7 @@ Call_Pal_Cserve: // // Function: // Swap control to another PAL. -//- +// CALL_PAL_PRIV(PAL_SWPPAL_ENTRY) Call_Pal_Swppal: @@ -3551,7 +2588,7 @@ Call_Pal_Swppal: //orig halt // don't know how to get the address here - kludge ok, load pal at 0 .long 0 // ?? hack upon hack...pb -CALL_PAL_SWPPAL_10_: ldlp r3, 0(r2) // fetch target addr +CALL_PAL_SWPPAL_10_: ldl_p r3, 0(r2) // fetch target addr // ble r3, swppal_fail ; if OSF not linked in say not loaded. mfpr r2, pal_base // fetch pal base @@ -3574,8 +2611,8 @@ CallPal_OpcDec0B: CallPal_OpcDec0C: br r31, osfpal_calpal_opcdec -// .sbttl "wripir- PALcode for wripir instruction" -//+ +// +// wripir - PALcode for wripir instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -3588,7 +2625,7 @@ CallPal_OpcDec0C: // Exit: // interprocessor interrupt is recorded on the target processor // and is initiated when the proper enabling conditions are present. -//- +// CALL_PAL_PRIV(PAL_WRIPIR_ENTRY) Call_Pal_Wrpir: @@ -3604,16 +2641,15 @@ CallPal_OpcDec0E: CallPal_OpcDec0F: br r31, osfpal_calpal_opcdec -// .sbttl "rdmces- PALcode for rdmces instruction" - -//+ +// +// rdmces - PALcode for rdmces instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. // // Function: // R0 <- ZEXT(MCES) -//- +// CALL_PAL_PRIV(PAL_RDMCES_ENTRY) Call_Pal_Rdmces: @@ -3622,9 +2658,8 @@ Call_Pal_Rdmces: hw_rei -// .sbttl "wrmces- PALcode for wrmces instruction" - -//+ +// +// wrmces - PALcode for wrmces instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -3636,7 +2671,7 @@ Call_Pal_Rdmces: // MCES<3> <- R16<3> (DPC) // MCES<4> <- R16<4> (DSC) // -//- +// CALL_PAL_PRIV(PAL_WRMCES_ENTRY) Call_Pal_Wrmces: @@ -3652,18 +2687,14 @@ Call_Pal_Wrmces: or r1, r17, r1 // Update DPC and DSC mtpr r1, pt_mces // Write MCES back -#if rawhide_system == 0 nop // Pad to fix PT write->read restriction -#else - blbs r16, RAWHIDE_clear_mchk_lock // Clear logout from lock -#endif nop hw_rei -// .sbttl "CALL_PAL OPCDECs" +// CALL_PAL OPCDECs CALL_PAL_PRIV(0x0012) CallPal_OpcDec12: @@ -3765,9 +2796,8 @@ CallPal_OpcDec29: CallPal_OpcDec2A: br r31, osfpal_calpal_opcdec -// .sbttl "wrfen - PALcode for wrfen instruction" - -//+ +// +// wrfen - PALcode for wrfen instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -3775,10 +2805,11 @@ CallPal_OpcDec2A: // Function: // a0<0> -> ICSR<FPE> // Store new FEN in PCB -// Final value of t0 (r1), t8..t10 (r22..r24) and a0 (r16) are UNPREDICTABLE +// Final value of t0 (r1), t8..t10 (r22..r24) and a0 (r16) +// are UNPREDICTABLE // // Issue: What about pending FP loads when FEN goes from on->off???? -//- +// CALL_PAL_PRIV(PAL_WRFEN_ENTRY) Call_Pal_Wrfen: @@ -3795,7 +2826,7 @@ Call_Pal_Wrfen: mfpr r12, pt_pcbb // Get PCBB - E1 mtpr r1, ev5__icsr // write new ICSR. 3 Bubble cycles to HW_REI - stlp r16, osfpcb_q_fen(r12) // Store FEN in PCB. + stl_p r16, osfpcb_q_fen(r12) // Store FEN in PCB. mfpr r31, pt0 // Pad ICSR<FPE> write. mfpr r31, pt0 @@ -3809,15 +2840,15 @@ Call_Pal_Wrfen: CallPal_OpcDec2C: br r31, osfpal_calpal_opcdec -// .sbttl "wrvptpr - PALcode for wrvptpr instruction" -//+ +// +// wrvptpr - PALcode for wrvptpr instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. // // Function: // vptptr <- a0 (r16) -//- +// CALL_PAL_PRIV(PAL_WRVPTPTR_ENTRY) Call_Pal_Wrvptptr: @@ -3835,9 +2866,9 @@ CallPal_OpcDec2E: CallPal_OpcDec2F: br r31, osfpal_calpal_opcdec -// .sbttl "swpctx- PALcode for swpctx instruction" -//+ +// +// swpctx - PALcode for swpctx instruction // // Entry: // hardware dispatch via callPal instruction @@ -3850,44 +2881,44 @@ CallPal_OpcDec2F: // old pcbb returned in R0 // // Note: need to add perf monitor stuff -//- +// CALL_PAL_PRIV(PAL_SWPCTX_ENTRY) Call_Pal_Swpctx: rpcc r13 // get cyccounter mfpr r0, pt_pcbb // get pcbb - ldqp r22, osfpcb_q_fen(r16) // get new fen/pme - ldqp r23, osfpcb_l_cc(r16) // get new asn + ldq_p r22, osfpcb_q_fen(r16) // get new fen/pme + ldq_p r23, osfpcb_l_cc(r16) // get new asn srl r13, 32, r25 // move offset mfpr r24, pt_usp // get usp - stqp r30, osfpcb_q_ksp(r0) // store old ksp -// pvc_violate 379 // stqp can't trap except replay. only problem if mf same ipr in same shadow. + stq_p r30, osfpcb_q_ksp(r0) // store old ksp +// pvc_violate 379 // stq_p can't trap except replay. only problem if mf same ipr in same shadow. mtpr r16, pt_pcbb // set new pcbb - stqp r24, osfpcb_q_usp(r0) // store usp + stq_p r24, osfpcb_q_usp(r0) // store usp addl r13, r25, r25 // merge for new time - stlp r25, osfpcb_l_cc(r0) // save time + stl_p r25, osfpcb_l_cc(r0) // save time ldah r24, (1<<(icsr_v_fpe-16))(r31) and r22, 1, r12 // isolate fen mfpr r25, icsr // get current icsr - ev5_pass2 lda r24, (1<<icsr_v_pmp)(r24) + lda r24, (1<<icsr_v_pmp)(r24) br r31, swpctx_cont -// .sbttl "wrval - PALcode for wrval instruction" -//+ +// +// wrval - PALcode for wrval instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. // // Function: // sysvalue <- a0 (r16) -//- +// CALL_PAL_PRIV(PAL_WRVAL_ENTRY) Call_Pal_Wrval: @@ -3897,17 +2928,15 @@ Call_Pal_Wrval: nop hw_rei - -// .sbttl "rdval - PALcode for rdval instruction" - -//+ +// +// rdval - PALcode for rdval instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. // // Function: // v0 (r0) <- sysvalue -//- +// CALL_PAL_PRIV(PAL_RDVAL_ENTRY) Call_Pal_Rdval: @@ -3916,8 +2945,8 @@ Call_Pal_Rdval: nop hw_rei -// .sbttl "tbi - PALcode for tbi instruction" -//+ +// +// tbi - PALcode for tbi instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -3926,7 +2955,7 @@ Call_Pal_Rdval: // TB invalidate // r16/a0 = TBI type // r17/a1 = Va for TBISx instructions -//- +// CALL_PAL_PRIV(PAL_TBI_ENTRY) Call_Pal_Tbi: @@ -3946,8 +2975,8 @@ CALL_PAL_tbi_30_: hw_rei nop -// .sbttl "wrent - PALcode for wrent instruction" -//+ +// +// wrent - PALcode for wrent instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -3958,7 +2987,7 @@ CALL_PAL_tbi_30_: // r17/a1 = Entry Number 0..5 // // r22, r23 trashed -//- +// CALL_PAL_PRIV(PAL_WRENT_ENTRY) Call_Pal_Wrent: @@ -3978,8 +3007,8 @@ CALL_PAL_wrent_10_: bic r16, 3, r16 // clean pc CALL_PAL_wrent_30_: hw_rei // out of range, just return -// .sbttl "swpipl - PALcode for swpipl instruction" -//+ +// +// swpipl - PALcode for swpipl instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -3989,7 +3018,7 @@ CALL_PAL_wrent_30_: // PS<IPL> <- a0<2:0> (r16) // // t8 (r22) is scratch -//- +// CALL_PAL_PRIV(PAL_SWPIPL_ENTRY) Call_Pal_Swpipl: @@ -4007,15 +3036,15 @@ Call_Pal_Swpipl: hw_rei // back -// .sbttl "rdps - PALcode for rdps instruction" -//+ +// +// rdps - PALcode for rdps instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. // // Function: // v0 (r0) <- ps -//- +// CALL_PAL_PRIV(PAL_RDPS_ENTRY) Call_Pal_Rdps: @@ -4023,15 +3052,15 @@ Call_Pal_Rdps: nop // Must be 2 cycles long hw_rei -// .sbttl "wrkgp - PALcode for wrkgp instruction" -//+ +// +// wrkgp - PALcode for wrkgp instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. // // Function: // kgp <- a0 (r16) -//- +// CALL_PAL_PRIV(PAL_WRKGP_ENTRY) Call_Pal_Wrkgp: @@ -4041,15 +3070,15 @@ Call_Pal_Wrkgp: nop hw_rei -// .sbttl "wrusp - PALcode for wrusp instruction" -//+ +// +// wrusp - PALcode for wrusp instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. // // Function: // usp <- a0 (r16) -//- +// CALL_PAL_PRIV(PAL_WRUSP_ENTRY) Call_Pal_Wrusp: @@ -4059,8 +3088,8 @@ Call_Pal_Wrusp: nop hw_rei -// .sbttl "wrperfmon - PALcode for wrperfmon instruction" -//+ +// +// wrperfmon - PALcode for wrperfmon instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -4137,7 +3166,6 @@ Call_Pal_Wrusp: CALL_PAL_PRIV(0x0039) // unsupported in Hudson code .. pboyle Nov/95 CALL_PAL_Wrperfmon: -#if perfmon_debug == 0 // "real" performance monitoring code cmpeq r16, 1, r0 // check for enable bne r0, perfmon_en // br if requested to enable @@ -4162,20 +3190,16 @@ CALL_PAL_Wrperfmon: beq r16, perfmon_dis // br if requested to disable (r16=0) br r31, perfmon_unknown // br if unknown request -#else - - br r31, pal_perfmon_debug -#endif -// .sbttl "rdusp - PALcode for rdusp instruction" -//+ +// +// rdusp - PALcode for rdusp instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. // // Function: // v0 (r0) <- usp -//- +// CALL_PAL_PRIV(PAL_RDUSP_ENTRY) Call_Pal_Rdusp: @@ -4188,15 +3212,15 @@ Call_Pal_Rdusp: CallPal_OpcDec3B: br r31, osfpal_calpal_opcdec -// .sbttl "whami - PALcode for whami instruction" -//+ +// +// whami - PALcode for whami instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. // // Function: // v0 (r0) <- whami -//- +// CALL_PAL_PRIV(PAL_WHAMI_ENTRY) Call_Pal_Whami: nop @@ -4204,7 +3228,8 @@ Call_Pal_Whami: extbl r0, 1, r0 // Isolate just whami bits hw_rei -// .sbttl "retsys - PALcode for retsys instruction" +// +// retsys - PALcode for retsys instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -4216,7 +3241,7 @@ Call_Pal_Whami: // mode switched from kern to user. // stacks swapped, ugp, upc restored. // r23, r25 junked -//- +// CALL_PAL_PRIV(PAL_RETSYS_ENTRY) Call_Pal_Retsys: @@ -4250,8 +3275,8 @@ Call_Pal_Retsys: CallPal_OpcDec3E: br r31, osfpal_calpal_opcdec -// .sbttl "rti - PALcode for rti instruction" -//+ +// +// rti - PALcode for rti instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -4263,13 +3288,11 @@ CallPal_OpcDec3E: // 24(sp) -> r16 (a0) // 32(sp) -> r17 (a1) // 40(sp) -> r18 (a3) -//- +// CALL_PAL_PRIV(PAL_RTI_ENTRY) -#ifdef SIMOS /* called once by platform_tlaser */ .globl Call_Pal_Rti -#endif Call_Pal_Rti: lda r25, osfsf_c_size(sp) // get updated sp bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr @@ -4296,9 +3319,12 @@ Call_Pal_Rti: br r31, rti_to_user // out of call_pal space -// .sbttl "Start the Unprivileged CALL_PAL Entry Points" -// .sbttl "bpt- PALcode for bpt instruction" -//+ +/////////////////////////////////////////////////// +// Start the Unprivileged CALL_PAL Entry Points +/////////////////////////////////////////////////// + +// +// bpt - PALcode for bpt instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -4310,7 +3336,7 @@ Call_Pal_Rti: // a2 <- unpred // vector via entIF // -//- +// // .text 1 // . = 0x3000 @@ -4340,8 +3366,8 @@ CALL_PAL_bpt_10_: br r31, bpt_bchk_common // out of call_pal space -// .sbttl "bugchk- PALcode for bugchk instruction" -//+ +// +// bugchk - PALcode for bugchk instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -4353,7 +3379,7 @@ CALL_PAL_bpt_10_: // a2 <- unpred // vector via entIF // -//- +// // CALL_PAL_UNPRIV(PAL_BUGCHK_ENTRY) Call_Pal_Bugchk: @@ -4385,8 +3411,8 @@ CALL_PAL_bugchk_10_: CallPal_OpcDec82: br r31, osfpal_calpal_opcdec -// .sbttl "callsys - PALcode for callsys instruction" -//+ +// +// callsys - PALcode for callsys instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -4397,7 +3423,7 @@ CallPal_OpcDec82: // gp = kgp // t8 - t10 (r22-r24) trashed // -//- +// // CALL_PAL_UNPRIV(PAL_CALLSYS_ENTRY) Call_Pal_Callsys: @@ -4408,9 +3434,9 @@ Call_Pal_Callsys: beq r24, sys_from_kern // sysCall from kern is not allowed mfpr r12, pt_entsys // get address of callSys routine -//+ +// // from here on we know we are in user going to Kern -//- +// mtpr r31, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles mtpr r31, ev5__ps // set Ibox current mode - 2 bubble to hw_rei @@ -4440,8 +3466,8 @@ CallPal_OpcDec84: CallPal_OpcDec85: br r31, osfpal_calpal_opcdec -// .sbttl "imb - PALcode for imb instruction" -//+ +// +// imb - PALcode for imb instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -4449,7 +3475,7 @@ CallPal_OpcDec85: // Function: // Flush the writebuffer and flush the Icache // -//- +// // CALL_PAL_UNPRIV(PAL_IMB_ENTRY) Call_Pal_Imb: @@ -4460,7 +3486,7 @@ Call_Pal_Imb: br r31, pal_ic_flush // Flush Icache -// .sbttl "CALL_PAL OPCDECs" +// CALL_PAL OPCDECs CALL_PAL_UNPRIV(0x0087) CallPal_OpcDec87: @@ -4554,8 +3580,8 @@ CallPal_OpcDec9C: CallPal_OpcDec9D: br r31, osfpal_calpal_opcdec -// .sbttl "rdunique - PALcode for rdunique instruction" -//+ +// +// rdunique - PALcode for rdunique instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -4563,17 +3589,17 @@ CallPal_OpcDec9D: // Function: // v0 (r0) <- unique // -//- +// // CALL_PAL_UNPRIV(PAL_RDUNIQUE_ENTRY) CALL_PALrdunique_: mfpr r0, pt_pcbb // get pcb pointer - ldqp r0, osfpcb_q_unique(r0) // get new value + ldq_p r0, osfpcb_q_unique(r0) // get new value hw_rei -// .sbttl "wrunique - PALcode for wrunique instruction" -//+ +// +// wrunique - PALcode for wrunique instruction // // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -4581,17 +3607,17 @@ CALL_PALrdunique_: // Function: // unique <- a0 (r16) // -//- +// // CALL_PAL_UNPRIV(PAL_WRUNIQUE_ENTRY) CALL_PAL_Wrunique: nop mfpr r12, pt_pcbb // get pcb pointer - stqp r16, osfpcb_q_unique(r12)// get new value + stq_p r16, osfpcb_q_unique(r12)// get new value nop // Pad palshadow write hw_rei // back -// .sbttl "CALL_PAL OPCDECs" +// CALL_PAL OPCDECs CALL_PAL_UNPRIV(0x00A0) CallPal_OpcDecA0: @@ -4634,8 +3660,9 @@ CallPal_OpcDecA9: br r31, osfpal_calpal_opcdec -// .sbttl "gentrap - PALcode for gentrap instruction" -//+ +// +// gentrap - PALcode for gentrap instruction +// // CALL_PAL_gentrap: // Entry: // Vectored into via hardware PALcode instruction dispatch. @@ -4647,7 +3674,7 @@ CallPal_OpcDecA9: // a2 <- unpred // vector via entIF // -//- +// CALL_PAL_UNPRIV(0x00AA) // unsupported in Hudson code .. pboyle Nov/95 @@ -4676,7 +3703,7 @@ CALL_PAL_gentrap_10_: br r31, bpt_bchk_common // out of call_pal space -// .sbttl "CALL_PAL OPCDECs" +// CALL_PAL OPCDECs CALL_PAL_UNPRIV(0x00AB) CallPal_OpcDecAB: @@ -4773,9 +3800,8 @@ CallPal_OpcDecBF: . = 0x4000 -// .sbttl "Continuation of MTPR_PERFMON" +// Continuation of MTPR_PERFMON ALIGN_BLOCK -#if perfmon_debug == 0 // "real" performance monitoring code // mux ctl perfmon_muxctl: @@ -4804,7 +3830,7 @@ perfmon_muxctl: bic r16, r8, r16 // isolate old mux select bits or r16, r25, r25 // create new bc_ctl mb // clear out cbox for future ipr write - stqp r25, ev5__bc_ctl(r14) // store to cbox ipr + stq_p r25, ev5__bc_ctl(r14) // store to cbox ipr mb // clear out cbox for future ipr write //orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr @@ -4875,26 +3901,20 @@ perfmon_en_cont: lda r25, CNS_Q_IPR(r25) RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r25); - ldqp r16, osfpcb_q_fen(r8) // read DAT/PME/FEN quadword + ldq_p r16, osfpcb_q_fen(r8) // read DAT/PME/FEN quadword mfpr r14, ev5__pmctr // read ibox pmctr ipr srl r16, osfpcb_v_pme, r16 // get pme bit mfpr r13, icsr and r16, 1, r16 // isolate pme bit // this code only needed in pass2 and later -//orig sget_addr r12, 1<<icsr_v_pmp, r31 lda r12, 1<<icsr_v_pmp(r31) // pb bic r13, r12, r13 // clear pmp bit sll r16, icsr_v_pmp, r12 // move pme bit to icsr<pmp> position or r12, r13, r13 // new icsr with icsr<pmp> bit set/clear - ev5_pass2 mtpr r13, icsr // update icsr + mtpr r13, icsr // update icsr -#if ev5_p1 != 0 - lda r12, 1(r31) - cmovlbc r25, r12, r16 // r16<0> set if either pme=1 or sprocess=0 (sprocess in bit 0 of r25) -#else bis r31, 1, r16 // set r16<0> on pass2 to update pmctr always (icsr provides real enable) -#endif sll r25, 6, r25 // shift frequency bits into pmctr_v_ctl positions bis r14, r31, r13 // copy pmctr @@ -4982,7 +4002,7 @@ perfmon_ctl: lda r12, CNS_Q_IPR(r12) RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12); -//orig get_addr r8, (1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk), r31 // build mode mask for pmctr register + // build mode mask for pmctr register LDLI(r8, ((1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk))) mfpr r0, ev5__pmctr and r17, r8, r25 // isolate pmctr mode bits @@ -4990,17 +4010,19 @@ perfmon_ctl: or r0, r25, r25 // or in new mode bits mtpr r25, ev5__pmctr -//;the following code will only be used in pass2, but should not hurt anything if run in pass1. + // the following code will only be used in pass2, but should + // not hurt anything if run in pass1. mfpr r8, icsr lda r25, 1<<icsr_v_pma(r31) // set icsr<pma> if r17<0>=0 bic r8, r25, r8 // clear old pma bit cmovlbs r17, r31, r25 // and clear icsr<pma> if r17<0>=1 or r8, r25, r8 - ev5_pass2 mtpr r8, icsr // 4 bubbles to hw_rei + mtpr r8, icsr // 4 bubbles to hw_rei mfpr r31, pt0 // pad icsr write mfpr r31, pt0 // pad icsr write -//;the following code not needed for pass2 and later, but should work anyway. + // the following code not needed for pass2 and later, but + // should work anyway. bis r14, 1, r14 // set for select processes blbs r17, perfmon_sp // branch if select processes bic r14, 1, r14 // all processes @@ -5018,7 +4040,7 @@ perfmon_freq: lda r8, 0x3F(r31) //orig sll r8, pmctr_ctl_v_frq2, r8 // build mask for frequency select field -// I guess this should be a shift of 4 bits from the above control register structure .. pb +// I guess this should be a shift of 4 bits from the above control register structure #define pmctr_ctl_v_frq2_SHIFT 4 sll r8, pmctr_ctl_v_frq2_SHIFT, r8 // build mask for frequency select field @@ -5043,8 +4065,7 @@ perfmon_wr: lda r8, 0x3FFF(r31) // ctr2<13:0> mask sll r8, pmctr_v_ctr2, r8 -//orig get_addr r9, 0xFFFFFFFF, r31, verify=0 // ctr2<15:0>,ctr1<15:0> mask - LDLI(r9, (0xFFFFFFFF)) + LDLI(r9, (0xFFFFFFFF)) // ctr2<15:0>,ctr1<15:0> mask sll r9, pmctr_v_ctr1, r9 or r8, r9, r8 // or ctr2, ctr1, ctr0 mask bic r14, r8, r14 // clear ctr fields @@ -5062,123 +4083,33 @@ perfmon_unknown: or r31, r31, r0 // set fail hw_rei // back to user -#else - -// end of "real code", start of debug code - -//+ -// Debug environment: -// (in pass2, always set icsr<pma> to ensure master counter enable is on) -// R16 = 0 Write to on-chip performance monitor ipr -// r17 = on-chip ipr -// r0 = return value of read of on-chip performance monitor ipr -// R16 = 1 Setup Cbox mux selects -// r17 = Cbox mux selects in same position as in bc_ctl ipr. -// r0 = return value of read of on-chip performance monitor ipr -// -//- -pal_perfmon_debug: - mfpr r8, icsr - lda r9, 1<<icsr_v_pma(r31) - bis r8, r9, r8 - mtpr r8, icsr - - mfpr r0, ev5__pmctr // read old value - bne r16, cbox_mux_sel - - mtpr r17, ev5__pmctr // update pmctr ipr - br r31, end_pm - -cbox_mux_sel: - // ok, now tackle cbox mux selects - ldah r14, 0xfff0(r31) - zap r14, 0xE0, r14 // Get Cbox IPR base -//orig get_bc_ctl_shadow r16 // bc_ctl returned - mfpr r16, pt_impure - lda r16, CNS_Q_IPR(r16) - RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16); - - lda r8, 0x3F(r31) // build mux select mask - sll r8, BC_CTL_V_PM_MUX_SEL, r8 - - and r17, r8, r25 // isolate bc_ctl mux select bits - bic r16, r8, r16 // isolate old mux select bits - or r16, r25, r25 // create new bc_ctl - mb // clear out cbox for future ipr write - stqp r25, ev5__bc_ctl(r14) // store to cbox ipr - mb // clear out cbox for future ipr write -//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr - mfpr r16, pt_impure - lda r16, CNS_Q_IPR(r16) - SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16); - -end_pm: hw_rei - -#endif - - -//;The following code is a workaround for a cpu bug where Istream prefetches to -//;super-page address space in user mode may escape off-chip. -#if spe_fix != 0 - - ALIGN_BLOCK -hw_rei_update_spe: - mfpr r12, pt_misc // get previous mode - srl r11, osfps_v_mode, r10 // isolate current mode bit - and r10, 1, r10 - extbl r12, 7, r8 // get previous mode field - and r8, 1, r8 // isolate previous mode bit - cmpeq r10, r8, r8 // compare previous and current modes - beq r8, hw_rei_update_spe_5_ - hw_rei // if same, just return - -hw_rei_update_spe_5_: - -#if fill_err_hack != 0 - - fill_error_hack -#endif - - mfpr r8, icsr // get current icsr value - ldah r9, (2<<(icsr_v_spe-16))(r31) // get spe bit mask - bic r8, r9, r8 // disable spe - xor r10, 1, r9 // flip mode for new spe bit - sll r9, icsr_v_spe+1, r9 // shift into position - bis r8, r9, r8 // enable/disable spe - lda r9, 1(r31) // now update our flag - sll r9, pt_misc_v_cm, r9 // previous mode saved bit mask - bic r12, r9, r12 // clear saved previous mode - sll r10, pt_misc_v_cm, r9 // current mode saved bit mask - bis r12, r9, r12 // set saved current mode - mtpr r12, pt_misc // update pt_misc - mtpr r8, icsr // update icsr - -#if osf_chm_fix != 0 - - - blbc r10, hw_rei_update_spe_10_ // branch if not user mode - - mb // ensure no outstanding fills - lda r12, 1<<dc_mode_v_dc_ena(r31) // User mode - mtpr r12, dc_mode // Turn on dcache - mtpr r31, dc_flush // and flush it - br r31, pal_ic_flush - -hw_rei_update_spe_10_: mfpr r9, pt_pcbb // Kernel mode - ldqp r9, osfpcb_q_Fen(r9) // get FEN - blbc r9, pal_ic_flush // return if FP disabled - mb // ensure no outstanding fills - mtpr r31, dc_mode // turn off dcache -#endif - - - br r31, pal_ic_flush // Pal restriction - must flush Icache if changing ICSR<SPE> -#endif +////////////////////////////////////////////////////////// +// Copy code +////////////////////////////////////////////////////////// copypal_impl: mov r16, r0 - ble r18, finished #if len <=0 we are finished +#ifdef CACHE_COPY +#ifndef CACHE_COPY_UNALIGNED + and r16, 63, r8 + and r17, 63, r9 + bis r8, r9, r8 + bne r8, cache_copy_done +#endif + bic r18, 63, r8 + and r18, 63, r18 + beq r8, cache_copy_done +cache_loop: + ldf f17, 0(r16) + stf f17, 0(r16) + addq r17, 64, r17 + addq r16, 64, r16 + subq r8, 64, r8 + bne r8, cache_loop +cache_copy_done: +#endif + ble r18, finished // if len <=0 we are finished ldq_u r8, 0(r17) xor r17, r16, r9 and r9, 7, r9 diff --git a/system/alpha/palcode/osfpal_cache_copy.S b/system/alpha/palcode/osfpal_cache_copy.S deleted file mode 100644 index 6bddf0f2f..000000000 --- a/system/alpha/palcode/osfpal_cache_copy.S +++ /dev/null @@ -1,5309 +0,0 @@ -/* - * Copyright (c) 2003, 2004 - * The Regents of The University of Michigan - * All Rights Reserved - * - * This code is part of the M5 simulator, developed by Nathan Binkert, - * Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions - * from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew - * Schultz. - * - * Permission is granted to use, copy, create derivative works and - * redistribute this software and such derivative works for any - * purpose, so long as the copyright notice above, this grant of - * permission, and the disclaimer below appear in all copies made; and - * so long as the name of The University of Michigan is not used in - * any advertising or publicity pertaining to the use or distribution - * of this software without specific, written prior authorization. - * - * THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE - * UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND - * WITHOUT WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER - * EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE. THE REGENTS OF THE UNIVERSITY OF MICHIGAN SHALL NOT BE - * LIABLE FOR ANY DAMAGES, INCLUDING DIRECT, SPECIAL, INDIRECT, - * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WITH RESPECT TO ANY CLAIM - * ARISING OUT OF OR IN CONNECTION WITH THE USE OF THE SOFTWARE, EVEN - * IF IT HAS BEEN OR IS HEREAFTER ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGES. - */ -/* -Copyright 1992, 1993, 1994, 1995 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -// modified to use the Hudson style "impure.h" instead of ev5_impure.sdl -// since we don't have a mechanism to expand the data structures.... pb Nov/95 - -// build_fixed_image: not sure what means -// real_mm to be replaced during rewrite -// remove_save_state remove_restore_state can be remooved to save space ?? - - -#include "ev5_defs.h" -#include "ev5_impure.h" -#include "ev5_alpha_defs.h" -#include "ev5_paldef.h" -#include "ev5_osfalpha_defs.h" -#include "fromHudsonMacros.h" -#include "fromHudsonOsf.h" -#include "dc21164FromGasSources.h" - -#ifdef SIMOS -#define DEBUGSTORE(c) nop -#else -#define DEBUGSTORE(c) \ - lda r13, c(zero) ; \ - bsr r25, debugstore -#endif - -#define DEBUG_EXC_ADDR()\ - bsr r25, put_exc_addr; \ - DEBUGSTORE(13) ; \ - DEBUGSTORE(10) - -#define egore 0 -#define acore 0 -#define beh_model 0 -#define ev5_p2 1 -#define ev5_p1 0 -#define ldvpte_bug_fix 1 -#define osf_chm_fix 0 - -// Do we want to do this?? pb -#define spe_fix 0 -// Do we want to do this?? pb -#define build_fixed_image 0 - -#define ev5_pass2 -#define enable_p4_fixups 0 -#define osf_svmin 1 -#define enable_physical_console 0 -#define fill_err_hack 0 -#define icflush_on_tbix 0 -#define max_cpuid 1 -#define perfmon_debug 0 -#define rawhide_system 0 -#define rax_mode 0 - - -// This is the fix for the user-mode super page references causing the machine to crash. -#if (spe_fix == 1) && (build_fixed_image==1) -#define hw_rei_spe br r31, hw_rei_update_spe -#else -#define hw_rei_spe hw_rei -#endif - - -// redefine a few of the distribution-code names to match the Hudson gas names. -// opcodes -#define ldqp ldq_p -#define stqp stq_p -#define ldlp ldl_p -#define stlp stl_p - -#define r0 $0 -#define r1 $1 -#define r2 $2 -#define r3 $3 -#define r4 $4 -#define r5 $5 -#define r6 $6 -#define r7 $7 -#define r8 $8 -#define r9 $9 -#define r10 $10 -#define r11 $11 -#define r12 $12 -#define r13 $13 -#define r14 $14 -#define r15 $15 -#define r16 $16 -#define r17 $17 -#define r18 $18 -#define r19 $19 -#define r20 $20 -#define r21 $21 -#define r22 $22 -#define r23 $23 -#define r24 $24 -#define r25 $25 -#define r26 $26 -#define r27 $27 -#define r28 $28 -#define r29 $29 -#define r30 $30 -#define r31 $31 - -// .title "EV5 OSF PAL" -// .ident "V1.18" -// -//**************************************************************************** -//* * -//* Copyright (c) 1992, 1993, 1994, 1995 * -//* by DIGITAL Equipment Corporation, Maynard, Mass. * -//* * -//* This software is furnished under a license and may be used and copied * -//* only in accordance with the terms of such license and with the * -//* inclusion of the above copyright notice. This software or any other * -//* copies thereof may not be provided or otherwise made available to any * -//* other person. No title to and ownership of the software is hereby * -//* transferred. * -//* * -//* The information in this software is subject to change without notice * -//* and should not be construed as a commitment by DIGITAL Equipment * -//* Corporation. * -//* * -//* DIGITAL assumes no responsibility for the use or reliability of its * -//* software on equipment which is not supplied by DIGITAL. * -//* * -//**************************************************************************** - -// .sbttl "Edit History" -//+ -// Who Rev When What -// ------------ --- ----------- -------------------------------- -// DB 0.0 03-Nov-1992 Start -// DB 0.1 28-Dec-1992 add swpctx -// DB 0.2 05-Jan-1993 Bug: PVC found mtpr dtb_CM -> virt ref bug -// DB 0.3 11-Jan-1993 rearrange trap entry points -// DB 0.4 01-Feb-1993 add tbi -// DB 0.5 04-Feb-1993 real MM, kludge reset flow, kludge swppal -// DB 0.6 09-Feb-1993 Bug: several stack pushers used r16 for pc (should be r14) -// DB 0.7 10-Feb-1993 Bug: pushed wrong PC (+8) on CALL_PAL OPCDEC -// Bug: typo on register number for store in wrunique -// Bug: rti to kern uses r16 as scratch -// Bug: callsys saving wrong value in pt_usp -// DB 0.8 16-Feb-1993 PVC: fix possible pt write->read bug in wrkgp, wrusp -// DB 0.9 18-Feb-1993 Bug: invalid_dpte_handler shifted pte twice -// Bug: rti stl_c could corrupt the stack -// Bug: unaligned returning wrong value in r17 (or should be and) -// DB 0.10 19-Feb-1993 Add draina, rd/wrmces, cflush, cserve, interrupt -// DB 0.11 23-Feb-1993 Turn caches on in reset flow -// DB 0.12 10-Mar-1993 Bug: wrong value for icsr for FEN in kern mode flow -// DB 0.13 15-Mar-1993 Bug: wrong value pushed for PC in invalid_dpte_handler if stack push tbmisses -// DB 0.14 23-Mar-1993 Add impure pointer paltemp, reshuffle some other paltemps to match VMS -// DB 0.15 15-Apr-1993 Combine paltemps for WHAMI and MCES -// DB 0.16 12-May-1993 Update reset -// New restriction: no mfpr exc_addr in cycle 1 of call_pal flows -// Bug: in wrmces, not clearing DPC, DSC -// Update swppal -// Add pal bugchecks, pal_save_state, pal_restore_state -// DB 0.17 24-May-1993 Add dfault_in_pal flow; fixup stack builder to have common state for pc/ps. -// New restriction: No hw_rei_stall in 0,1,2 after mtpr itb_asn -// DB 0.18 26-May-1993 PVC fixes -// JM 0.19 01-jul-1993 Bug: OSFPAL_CALPAL_OPCDEC, TRAP_OPCDEC -- move mt exc_addr after stores -// JM 0.20 07-jul-1993 Update cns_ and mchk_ names for impure.mar conversion to .sdl -// Bug: exc_addr was being loaded before stores that could dtb_miss in the following -// routines: TRAP_FEN,FEN_TO_OPCDEC,CALL_PAL_CALLSYS,RTI_TO_KERN -// JM 0.21 26-jul-1993 Bug: move exc_addr load after ALL stores in the following routines: -// TRAP_IACCVIO::,TRAP_OPCDEC::,TRAP_ARITH::,TRAP_FEN:: -// dfault_trap_cont:,fen_to_opcdec:,invalid_dpte_handler: -// osfpal_calpal_opcdec:,CALL_PAL_callsys::,TRAP_UNALIGN:: -// Bugs from PVC: trap_unalign - mt pt0 ->mf pt0 within 2 cycles -// JM 0.22 28-jul-1993 Add WRIPIR instruction -// JM 0.23 05-aug-1993 Bump version number for release -// JM 0.24 11-aug-1993 Bug: call_pal_swpipl - palshadow write -> hw_rei violation -// JM 0.25 09-sep-1993 Disable certain "hidden" pvc checks in call_pals; -// New restriction: No hw_rei_stall in 0,1,2,3,4 after mtpr itb_asn - affects HALT(raxmode), -// and SWPCTX -// JM 0.26 07-oct-1993 Re-implement pal_version -// JM 0.27 12-oct-1993 One more time: change pal_version format to conform to SRM -// JM 0.28 14-oct-1993 Change ic_flush routine to pal_ic_flush -// JM 0.29 19-oct-1993 BUG(?): dfault_in_pal: use exc_addr to check for dtbmiss,itbmiss check instead -// of mm_stat<opcode>. mm_stat contains original opcode, not hw_ld. -// JM 0.30 28-oct-1993 BUG: PVC violation - mf exc_addr in first cycles of call_pal in rti,retsys -// JM 0.31 15-nov-1993 BUG: WRFEN trashing r0 -// JM 0.32 21-nov-1993 BUG: dtb_ldq,itb_ldq (used in dfault_in_pal) not defined when real_mm=0 -// JM 0.33 24-nov-1993 save/restore_state - -// BUG: use ivptbr to restore mvptbr -// BUG: adjust hw_ld/st base/offsets to accomodate 10-bit offset limit -// CHANGE: Load 2 pages into dtb to accomodate compressed logout area/multiprocessors -// JM 0.34 20-dec-1993 BUG: set r11<mode> to kernel for ksnv halt case -// BUG: generate ksnv halt when tb miss on kernel stack accesses -// save exc_addr in r14 for invalid_dpte stack builder -// JM 0.35 30-dec-1993 BUG: PVC violation in trap_arith - mt exc_sum in shadow of store with mf exc_mask in -// the same shadow -// JM 0.36 6-jan-1994 BUG: fen_to_opcdec - savePC should be PC+4, need to save old PS, update new PS -// New palcode restiction: mt icsr<fpe,hwe> --> 3 bubbles to hw_rei --affects wrfen -// JM 0.37 25-jan-1994 BUG: PVC violations in restore_state - mt dc_mode/maf_mode ->mbox instructions -// Hide impure area manipulations in macros -// BUG: PVC violation in save and restore state-- move mt icsr out of shadow of ld/st -// Add some pvc_violate statements -// JM 0.38 1-feb-1994 Changes to save_state: save pt1; don't save r31,f31; update comments to reflect reality; -// Changes to restore_state: restore pt1, icsr; don't restore r31,f31; update comments -// Add code to ensure fen bit set in icsr before ldt -// conditionally compile rax_more_reset out. -// move ldqp,stqp macro definitions to ev5_pal_macros.mar and add .mcall's for them here -// move rax reset stuff to ev5_osf_system_pal.m64 -// JM 0.39 7-feb-1994 Move impure pointer to pal scratch space. Use former pt_impure for bc_ctl shadow -// and performance monitoring bits -// Change to save_state routine to save more iprs. -// JM 0.40 19-feb-1994 Change algorithm in save/restore_state routines; add f31,r31 back in -// JM 0.41 21-feb-1994 Add flags to compile out save/restore state (not needed in some systems) -// remove_save_state,remove_restore_state;fix new pvc violation in save_state -// JM 0.42 22-feb-1994 BUG: save_state overwriting r3 -// JM 0.43 24-feb-1994 BUG: save_state saving wrong icsr -// JM 0.44 28-feb-1994 Remove ic_flush from wr_tbix instructions -// JM 0.45 15-mar-1994 BUG: call_pal_tbi trashes a0 prior to range check (instruction order problem) -// New pal restriction in pal_restore_state: icsr<fpe>->floating instr = 3 bubbles -// Add exc_sum and exc_mask to pal_save_state (not restore) -// JM 0.46 22-apr-1994 Move impure pointer back into paltemp; Move bc_ctl shadow and pmctr_ctl into impure -// area. -// Add performance counter support to swpctx and wrperfmon -// JM 0.47 9-may-1994 Bump version # (for ev5_osf_system_pal.m64 sys_perfmon fix) -// JM 0.48 13-jun-1994 BUG: trap_interrupt --> put new ev5 ipl at 30 for all osfipl6 interrupts -// JM 0.49 8-jul-1994 BUG: In the unlikely (impossible?) event that the branch to pal_pal_bug_check is -// taken in the interrupt flow, stack is pushed twice. -// SWPPAL - update to support ECO 59 to allow 0 as a valid address -// Add itb flush to save/restore state routines -// Change hw_rei to hw_rei_stall in ic_flush routine. Shouldn't be necessary, but -// conforms to itbia restriction. -// Added enable_physical_console flag (for enter/exit console routines only) -// JM 0.50 29-jul-1994 Add code to dfault & invalid_dpte_handler to ignore exceptions on a -// load to r31/f31. changed dfault_fetch_err to dfault_fetch_ldr31_err and -// nmiss_fetch_err to nmiss_fetch_ldr31_err. -// JM 1.00 1-aug-1994 Add pass2 support (swpctx) -// JM 1.01 2-aug-1994 swppal now passes bc_ctl/bc_config in r1/r2 -// JM 1.02 15-sep-1994 BUG: swpctx missing shift of pme bit to correct position in icsr (pass2) -// Moved perfmon code here from system file. -// BUG: pal_perfmon - enable function not saving correct enables when pme not set (pass1) -// JM 1.03 3-oct-1994 Added (pass2 only) code to wrperfmon enable function to look at pme bit. -// JM 1.04 14-oct-1994 BUG: trap_interrupt - ISR read (and saved) before INTID -- INTID can change -// after ISR read, but we won't catch the ISR update. reverse order -// JM 1.05 17-nov-1994 Add code to dismiss UNALIGN trap if LD r31/F31 -// JM 1.06 28-nov-1994 BUG: missing mm_stat shift for store case in trap_unalign (new bug due to "dismiss" code) -// JM 1.07 1-dec-1994 EV5 PASS1,2,3 BUG WORKAROUND: Add flag LDVPTE_BUG_FIX. In DTBMISS_DOUBLE, branch to -// DTBMISS_SINGLE if not in palmode. -// JM 1.08 9-jan-1995 Bump version number for change to EV5_OSF_SYSTEM_PAL.M64 - ei_stat fix in mchk logout frame -// JM 1.09 2-feb-1995 Add flag "spe_fix" and accompanying code to workaround pre-pass4 bug: Disable Ibox -// superpage mode in User mode and re-enable in kernel mode. -// EV5_OSF_SYSTEM_PAL.M64 and EV5_PALDEF.MAR (added pt_misc_v_cm) also changed to support this. -// JM 1.10 24-feb-1995 Set ldvpte_bug_fix regardless of ev5 pass. set default to ev5_p2 -// ES 1.11 10-mar-1995 Add flag "osf_chm_fix" to enable dcache in user mode only to avoid -// cpu bug. -// JM 1.12 17-mar-1995 BUG FIX: Fix F0 corruption problem in pal_restore_state -// ES 1.13 17-mar-1995 Refine osf_chm_fix -// ES 1.14 20-mar-1995 Don't need as many stalls before hw_rei_stall in chm_fix -// ES 1.15 21-mar-1995 Add a stall to avoid a pvc violation in pal_restore_state -// Force pvc checking of exit_console -// ES 1.16 26-apr-1995 In the wrperfmon disable function, correct meaning of R17<2:0> to ctl2,ctl2,ctl0 -// ES 1.17 01-may-1995 In hw_rei_update_spe code, in the osf_chm fix, use bic and bis (self-correcting) -// instead of xor to maintain previous mode in pt_misc -// ES 1.18 14-jul-1995 In wrperfmon enable on pass2, update pmctr even if current process does -// not have pme set. The bits in icsr maintain the master enable state. -// In sys_reset, add icsr<17>=1 for ev56 byte/word eco enable -// -#define vmaj 1 -#define vmin 18 -#define vms_pal 1 -#define osf_pal 2 -#define pal_type osf_pal -#define osfpal_version_l ((pal_type<<16) | (vmaj<<8) | (vmin<<0)) -//- - -// .sbttl "PALtemp register usage" - -//+ -// The EV5 Ibox holds 24 PALtemp registers. This maps the OSF PAL usage -// for these PALtemps: -// -// pt0 local scratch -// pt1 local scratch -// pt2 entUna pt_entUna -// pt3 CPU specific impure area pointer pt_impure -// pt4 memory management temp -// pt5 memory management temp -// pt6 memory management temp -// pt7 entIF pt_entIF -// pt8 intmask pt_intmask -// pt9 entSys pt_entSys -// pt10 -// pt11 entInt pt_entInt -// pt12 entArith pt_entArith -// pt13 reserved for system specific PAL -// pt14 reserved for system specific PAL -// pt15 reserved for system specific PAL -// pt16 MISC: scratch ! WHAMI<7:0> ! 0 0 0 MCES<4:0> pt_misc, pt_whami, pt_mces -// pt17 sysval pt_sysval -// pt18 usp pt_usp -// pt19 ksp pt_ksp -// pt20 PTBR pt_ptbr -// pt21 entMM pt_entMM -// pt22 kgp pt_kgp -// pt23 PCBB pt_pcbb -// -//- - -// .sbttl "PALshadow register usage" -// -//+ -// -// EV5 shadows R8-R14 and R25 when in PALmode and ICSR<shadow_enable> = 1. -// This maps the OSF PAL usage of R8 - R14 and R25: -// -// r8 ITBmiss/DTBmiss scratch -// r9 ITBmiss/DTBmiss scratch -// r10 ITBmiss/DTBmiss scratch -// r11 PS -// r12 local scratch -// r13 local scratch -// r14 local scratch -// r25 local scratch -// -// -//- - -// .sbttl "ALPHA symbol definitions" -// _OSF_PSDEF GLOBAL -// _OSF_PTEDEF GLOBAL -// _OSF_VADEF GLOBAL -// _OSF_PCBDEF GLOBAL -// _OSF_SFDEF GLOBAL -// _OSF_MMCSR_DEF GLOBAL -// _SCBDEF GLOBAL -// _FRMDEF GLOBAL -// _EXSDEF GLOBAL -// _OSF_A0_DEF GLOBAL -// _MCESDEF GLOBAL - -// .sbttl "EV5 symbol definitions" - -// _EV5DEF -// _PALTEMP -// _MM_STAT_DEF -// _EV5_MM -// _EV5_IPLDEF - -// _HALT_CODES GLOBAL -// _MCHK_CODES GLOBAL - -// _PAL_IMPURE -// _PAL_LOGOUT - - - - -// .sbttl "PALcode configuration options" - -// There are a number of options that may be assembled into this version of -// PALcode. They should be adjusted in a prefix assembly file (i.e. do not edit -// the following). The options that can be adjusted cause the resultant PALcode -// to reflect the desired target system. - - -#define osfpal 1 // This is the PALcode for OSF. - -#ifndef rawhide_system - -#define rawhide_system 0 -#endif - - -#ifndef real_mm -// Page table translation vs 1-1 mapping -#define real_mm 1 -#endif - - -#ifndef rax_mode - -#define rax_mode 0 -#endif - -#ifndef egore -// End of reset flow starts a program at 200000(hex). -#define egore 1 -#endif - -#ifndef acore -// End of reset flow starts a program at 40000(hex). -#define acore 0 -#endif - - -// assume acore+egore+rax_mode lt 2 // Assertion checker - -#ifndef beh_model -// EV5 behavioral model specific code -#define beh_model 1 -#endif - -#ifndef init_cbox -// Reset flow init of Bcache and Scache -#define init_cbox 1 -#endif - -#ifndef disable_crd -// Decides whether the reset flow will disable -#define disable_crd 0 -#endif - - // correctable read interrupts via ICSR -#ifndef perfmon_debug -#define perfmon_debug 0 -#endif - -#ifndef icflush_on_tbix -#define icflush_on_tbix 0 -#endif - -#ifndef remove_restore_state -#define remove_restore_state 0 -#endif - -#ifndef remove_save_state -#define remove_save_state 0 -#endif - -#ifndef enable_physical_console -#define enable_physical_console 0 -#endif - -#ifndef ev5_p1 -#define ev5_p1 0 -#endif - -#ifndef ev5_p2 -#define ev5_p2 1 -#endif - -// assume ev5_p1+ev5_p2 eq 1 - -#ifndef ldvpte_bug_fix -#define ldvpte_bug_fix 1 // If set, fix ldvpte bug in dtbmiss_double flow. -#endif - -#ifndef spe_fix -// If set, disable super-page mode in user mode and re-enable -#define spe_fix 0 -#endif - // in kernel. Workaround for cpu bug. -#ifndef build_fixed_image -#define build_fixed_image 0 -#endif - - -#ifndef fill_err_hack -// If set, disable fill_error mode in user mode and re-enable -#define fill_err_hack 0 -#endif - - // in kernel. Workaround for cpu bug. - -// .macro hw_rei_spe -// .iif eq spe_fix, hw_rei -//#if spe_fix != 0 -// -// -//#define hw_rei_chm_count hw_rei_chm_count + 1 -// p4_fixup_label \hw_rei_chm_count -// .iif eq build_fixed_image, br r31, hw_rei_update_spe -// .iif ne build_fixed_image, hw_rei -//#endif -// -// .endm - -// Add flag "osf_chm_fix" to enable dcache in user mode only -// to avoid cpu bug. - -#ifndef osf_chm_fix -// If set, enable D-Cache in -#define osf_chm_fix 0 -#endif - -#if osf_chm_fix != 0 -// user mode only. -#define hw_rei_chm_count 0 -#endif - -#if osf_chm_fix != 0 - -#define hw_rei_stall_chm_count 0 -#endif - -#ifndef enable_p4_fixups - -#define enable_p4_fixups 0 -#endif - - // If set, do EV5 Pass 4 fixups -#if spe_fix == 0 - -#define osf_chm_fix 0 -#endif - -#if spe_fix == 0 - -#define enable_p4_fixups 0 -#endif - - // Only allow fixups if fix enabled - - //Turn off fill_errors and MEM_NEM in user mode -// .macro fill_error_hack ?L10_, ?L20_, ?L30_, ?L40_ -// //save r22,r23,r24 -// stqp r22, 0x150(r31) //add -// stqp r23, 0x158(r31) //contents -// stqp r24, 0x160(r31) //bit mask -// -// lda r22, 0x82(r31) -// ldah r22, 0x8740(r22) -// sll r22, 8, r22 -// ldlp r23, 0x80(r22) // r23 <- contents of CIA_MASK -// bis r23,r31,r23 -// -// lda r24, 0x8(r31) // r24 <- MEM_NEM bit -// beq r10, L10_ // IF user mode (r10<0> == 0) pal mode -// bic r23, r24, r23 // set fillerr_en bit -// br r31, L20_ // ELSE -//L10_: bis r23, r24, r23 // clear fillerr_en bit -//L20_: // ENDIF -// -// stlp r23, 0x80(r22) // write back the CIA_MASK register -// mb -// ldlp r23, 0x80(r22) -// bis r23,r31,r23 -// mb -// -// lda r22, 1(r31) // r22 <- 87.4000.0100 ptr to CIA_CTRL -// ldah r22, 0x8740(r22) -// sll r22, 8, r22 -// ldlp r23, 0(r22) // r23 <- contents of CIA_CTRL -// bis r23,r31,r23 -// -// -// lda r24, 0x400(r31) // r9 <- fillerr_en bit -// beq r10, L30_ // IF user mode (r10<0> == 0) pal mode -// bic r23, r24, r23 // set fillerr_en bit -// br r31, L40_ // ELSE -//L30_: bis r23, r24, r23 // clear fillerr_en bit -//L40_: // ENDIF -// -// stlp r23, 0(r22) // write back the CIA_CTRL register -// mb -// ldlp r23, 0(r22) -// bis r23,r31,r23 -// mb -// -// //restore r22,r23,r24 -// ldqp r22, 0x150(r31) -// ldqp r23, 0x158(r31) -// ldqp r24, 0x160(r31) -// -// .endm - -// multiprocessor support can be enabled for a max of n processors by -// setting the following to the number of processors on the system. -// Note that this is really the max cpuid. - -#ifndef max_cpuid -#define max_cpuid 8 -#endif - -#ifndef osf_svmin // platform specific palcode version number -#define osf_svmin 0 -#endif - - -#define osfpal_version_h ((max_cpuid<<16) | (osf_svmin<<0)) - -// .mcall ldqp // override macro64 definition with macro from library -// .mcall stqp // override macro64 definition with macro from library - - -// .psect _pal,mix -// huh pb pal_base: -// huh pb #define current_block_base . - pal_base - -// .sbttl "RESET - Reset Trap Entry Point" -//+ -// RESET - offset 0000 -// Entry: -// Vectored into via hardware trap on reset, or branched to -// on swppal. -// -// r0 = whami -// r1 = pal_base -// r2 = base of scratch area -// r3 = halt code -// -// -// Function: -// -//- - - .text 0 - . = 0x0000 - .globl Pal_Base -Pal_Base: - HDW_VECTOR(PAL_RESET_ENTRY) -Trap_Reset: - nop -#ifdef SIMOS - /* - * store into r1 - */ - br r1,sys_reset -#else - /* following is a srcmax change */ - - DEBUGSTORE(0x41) - /* The original code jumped using r1 as a linkage register to pass the base - of PALcode to the platform specific code. We use r1 to pass a parameter - from the SROM, so we hardcode the address of Pal_Base in platform.s - */ - br r31, sys_reset -#endif - - // Specify PAL version info as a constant - // at a known location (reset + 8). - - .long osfpal_version_l // <pal_type@16> ! <vmaj@8> ! <vmin@0> - .long osfpal_version_h // <max_cpuid@16> ! <osf_svmin@0> - .long 0 - .long 0 -pal_impure_start: - .quad 0 -pal_debug_ptr: - .quad 0 // reserved for debug pointer ; 20 -#if beh_model == 0 - - -#if enable_p4_fixups != 0 - - - .quad 0 - .long p4_fixup_hw_rei_fixup_table -#endif - -#else - - .quad 0 // - .quad 0 //0x0030 - .quad 0 - .quad 0 //0x0040 - .quad 0 - .quad 0 //0x0050 - .quad 0 - .quad 0 //0x0060 - .quad 0 -pal_enter_cns_address: - .quad 0 //0x0070 -- address to jump to from enter_console - .long <<sys_exit_console-pal_base>+1> //0x0078 -- offset to sys_exit_console (set palmode bit) -#endif - - - - -// .sbttl "IACCVIO- Istream Access Violation Trap Entry Point" - -//+ -// IACCVIO - offset 0080 -// Entry: -// Vectored into via hardware trap on Istream access violation or sign check error on PC. -// -// Function: -// Build stack frame -// a0 <- Faulting VA -// a1 <- MMCSR (1 for ACV) -// a2 <- -1 (for ifetch fault) -// vector via entMM -//- - - HDW_VECTOR(PAL_IACCVIO_ENTRY) -Trap_Iaccvio: - DEBUGSTORE(0x42) - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - bis r11, r31, r12 // Save PS - bge r25, TRAP_IACCVIO_10_ // no stack swap needed if cm=kern - - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r12 // Set new PS - mfpr r30, pt_ksp - -TRAP_IACCVIO_10_: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - mfpr r14, exc_addr // get pc - - stq r16, osfsf_a0(sp) // save regs - bic r14, 3, r16 // pass pc/va as a0 - - stq r17, osfsf_a1(sp) // a1 - or r31, mmcsr_c_acv, r17 // pass mm_csr as a1 - - stq r18, osfsf_a2(sp) // a2 - mfpr r13, pt_entmm // get entry point - - stq r11, osfsf_ps(sp) // save old ps - bis r12, r31, r11 // update ps - - stq r16, osfsf_pc(sp) // save pc - stq r29, osfsf_gp(sp) // save gp - - mtpr r13, exc_addr // load exc_addr with entMM - // 1 cycle to hw_rei - mfpr r29, pt_kgp // get the kgp - - subq r31, 1, r18 // pass flag of istream, as a2 - hw_rei_spe - - -// .sbttl "INTERRUPT- Interrupt Trap Entry Point" - -//+ -// INTERRUPT - offset 0100 -// Entry: -// Vectored into via trap on hardware interrupt -// -// Function: -// check for halt interrupt -// check for passive release (current ipl geq requestor) -// if necessary, switch to kernel mode -// push stack frame, update ps (including current mode and ipl copies), sp, and gp -// pass the interrupt info to the system module -// -//- - - - HDW_VECTOR(PAL_INTERRUPT_ENTRY) -Trap_Interrupt: - mfpr r13, ev5__intid // Fetch level of interruptor - mfpr r25, ev5__isr // Fetch interrupt summary register - - srl r25, isr_v_hlt, r9 // Get HLT bit - mfpr r14, ev5__ipl - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kern - blbs r9, sys_halt_interrupt // halt_interrupt if HLT bit set - - cmple r13, r14, r8 // R8 = 1 if intid .less than or eql. ipl - bne r8, sys_passive_release // Passive release is current rupt is lt or eq ipl - - and r11, osfps_m_mode, r10 // get mode bit - beq r10, TRAP_INTERRUPT_10_ // Skip stack swap in kernel - - mtpr r30, pt_usp // save user stack - mfpr r30, pt_ksp // get kern stack - -TRAP_INTERRUPT_10_: - lda sp, (0-osfsf_c_size)(sp)// allocate stack space - mfpr r14, exc_addr // get pc - - stq r11, osfsf_ps(sp) // save ps - stq r14, osfsf_pc(sp) // save pc - - stq r29, osfsf_gp(sp) // push gp - stq r16, osfsf_a0(sp) // a0 - -// pvc_violate 354 // ps is cleared anyway, if store to stack faults. - mtpr r31, ev5__ps // Set Ibox current mode to kernel - stq r17, osfsf_a1(sp) // a1 - - stq r18, osfsf_a2(sp) // a2 - subq r13, 0x11, r12 // Start to translate from EV5IPL->OSFIPL - - srl r12, 1, r8 // 1d, 1e: ipl 6. 1f: ipl 7. - subq r13, 0x1d, r9 // Check for 1d, 1e, 1f - - cmovge r9, r8, r12 // if .ge. 1d, then take shifted value - bis r12, r31, r11 // set new ps - - mfpr r12, pt_intmask - and r11, osfps_m_ipl, r14 // Isolate just new ipl (not really needed, since all non-ipl bits zeroed already) - -#ifdef SIMOS - /* - * Lance had space problems. We don't. - */ - extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL - mfpr r29, pt_kgp // update gp - mtpr r14, ev5__ipl // load the new IPL into Ibox -#else -// Moved the following three lines to sys_interrupt to make room for debug -// extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL -// mfpr r29, pt_kgp // update gp - -// mtpr r14, ev5__ipl // load the new IPL into Ibox -#endif - br r31, sys_interrupt // Go handle interrupt - - - -// .sbttl "ITBMISS- Istream TBmiss Trap Entry Point" - -//+ -// ITBMISS - offset 0180 -// Entry: -// Vectored into via hardware trap on Istream translation buffer miss. -// -// Function: -// Do a virtual fetch of the PTE, and fill the ITB if the PTE is valid. -// Can trap into DTBMISS_DOUBLE. -// This routine can use the PALshadow registers r8, r9, and r10 -// -//- - - HDW_VECTOR(PAL_ITB_MISS_ENTRY) -Trap_Itbmiss: -#if real_mm == 0 - - - // Simple 1-1 va->pa mapping - - nop // Pad to align to E1 - mfpr r8, exc_addr - - srl r8, page_offset_size_bits, r9 - sll r9, 32, r9 - - lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE - mtpr r9, itb_pte // E1 - - hw_rei_stall // Nital says I don't have to obey shadow wait rule here. -#else - - // Real MM mapping - nop - mfpr r8, ev5__ifault_va_form // Get virtual address of PTE. - - nop - mfpr r10, exc_addr // Get PC of faulting instruction in case of DTBmiss. - -pal_itb_ldq: - ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss - mtpr r10, exc_addr // Restore exc_address if there was a trap. - - mfpr r31, ev5__va // Unlock VA in case there was a double miss - nop - - and r8, osfpte_m_foe, r25 // Look for FOE set. - blbc r8, invalid_ipte_handler // PTE not valid. - - nop - bne r25, foe_ipte_handler // FOE is set - - nop - mtpr r8, ev5__itb_pte // Ibox remembers the VA, load the PTE into the ITB. - - hw_rei_stall // - -#endif - - - - -// .sbttl "DTBMISS_SINGLE - Dstream Single TBmiss Trap Entry Point" - -//+ -// DTBMISS_SINGLE - offset 0200 -// Entry: -// Vectored into via hardware trap on Dstream single translation buffer miss. -// -// Function: -// Do a virtual fetch of the PTE, and fill the DTB if the PTE is valid. -// Can trap into DTBMISS_DOUBLE. -// This routine can use the PALshadow registers r8, r9, and r10 -//- - - HDW_VECTOR(PAL_DTB_MISS_ENTRY) -Trap_Dtbmiss_Single: -#if real_mm == 0 - // Simple 1-1 va->pa mapping - mfpr r8, va // E0 - srl r8, page_offset_size_bits, r9 - - sll r9, 32, r9 - lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE - - mtpr r9, dtb_pte // E0 - nop // Pad to align to E0 - - - - mtpr r8, dtb_tag // E0 - nop - - nop // Pad tag write - nop - - nop // Pad tag write - nop - - hw_rei -#else - mfpr r8, ev5__va_form // Get virtual address of PTE - 1 cycle delay. E0. - mfpr r10, exc_addr // Get PC of faulting instruction in case of error. E1. - -// DEBUGSTORE(0x45) -// DEBUG_EXC_ADDR() - // Real MM mapping - mfpr r9, ev5__mm_stat // Get read/write bit. E0. - mtpr r10, pt6 // Stash exc_addr away - -pal_dtb_ldq: - ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss - nop // Pad MF VA - - mfpr r10, ev5__va // Get original faulting VA for TB load. E0. - nop - - mtpr r8, ev5__dtb_pte // Write DTB PTE part. E0. - blbc r8, invalid_dpte_handler // Handle invalid PTE - - mtpr r10, ev5__dtb_tag // Write DTB TAG part, completes DTB load. No virt ref for 3 cycles. - mfpr r10, pt6 - - // Following 2 instructions take 2 cycles - mtpr r10, exc_addr // Return linkage in case we trapped. E1. - mfpr r31, pt0 // Pad the write to dtb_tag - - hw_rei // Done, return -#endif - - - - -// .sbttl "DTBMISS_DOUBLE - Dstream Double TBmiss Trap Entry Point" - -//+ -// DTBMISS_DOUBLE - offset 0280 -// Entry: -// Vectored into via hardware trap on Double TBmiss from single miss flows. -// -// r8 - faulting VA -// r9 - original MMstat -// r10 - original exc_addr (both itb,dtb miss) -// pt6 - original exc_addr (dtb miss flow only) -// VA IPR - locked with original faulting VA -// -// Function: -// Get PTE, if valid load TB and return. -// If not valid then take TNV/ACV exception. -// -// pt4 and pt5 are reserved for this flow. -// -// -//- - - HDW_VECTOR(PAL_DOUBLE_MISS_ENTRY) -Trap_Dtbmiss_double: -#if ldvpte_bug_fix != 0 - mtpr r8, pt4 // save r8 to do exc_addr check - mfpr r8, exc_addr - blbc r8, Trap_Dtbmiss_Single //if not in palmode, should be in the single routine, dummy! - mfpr r8, pt4 // restore r8 -#endif - nop - mtpr r22, pt5 // Get some scratch space. E1. - // Due to virtual scheme, we can skip the first lookup and go - // right to fetch of level 2 PTE - sll r8, (64-((2*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA - mtpr r21, pt4 // Get some scratch space. E1. - - srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8 - mfpr r21, pt_ptbr // Get physical address of the page table. - - nop - addq r21, r22, r21 // Index into page table for level 2 PTE. - - sll r8, (64-((1*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA - ldqp r21, 0(r21) // Get level 2 PTE (addr<2:0> ignored) - - srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8 - blbc r21, double_pte_inv // Check for Invalid PTE. - - srl r21, 32, r21 // extract PFN from PTE - sll r21, page_offset_size_bits, r21 // get PFN * 2^13 for add to <seg3>*8 - - addq r21, r22, r21 // Index into page table for level 3 PTE. - nop - - ldqp r21, 0(r21) // Get level 3 PTE (addr<2:0> ignored) - blbc r21, double_pte_inv // Check for invalid PTE. - - mtpr r21, ev5__dtb_pte // Write the PTE. E0. - mfpr r22, pt5 // Restore scratch register - - mtpr r8, ev5__dtb_tag // Write the TAG. E0. No virtual references in subsequent 3 cycles. - mfpr r21, pt4 // Restore scratch register - - nop // Pad write to tag. - nop - - nop // Pad write to tag. - nop - - hw_rei - - - -// .sbttl "UNALIGN -- Dstream unalign trap" -//+ -// UNALIGN - offset 0300 -// Entry: -// Vectored into via hardware trap on unaligned Dstream reference. -// -// Function: -// Build stack frame -// a0 <- Faulting VA -// a1 <- Opcode -// a2 <- src/dst register number -// vector via entUna -//- - - HDW_VECTOR(PAL_UNALIGN_ENTRY) -Trap_Unalign: -/* DEBUGSTORE(0x47)*/ - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - mfpr r8, ev5__mm_stat // Get mmstat --ok to use r8, no tbmiss - mfpr r14, exc_addr // get pc - - srl r8, mm_stat_v_ra, r13 // Shift Ra field to ls bits - blbs r14, pal_pal_bug_check // Bugcheck if unaligned in PAL - - blbs r8, UNALIGN_NO_DISMISS // lsb only set on store or fetch_m - // not set, must be a load - and r13, 0x1F, r8 // isolate ra - - cmpeq r8, 0x1F, r8 // check for r31/F31 - bne r8, dfault_fetch_ldr31_err // if its a load to r31 or f31 -- dismiss the fault - -UNALIGN_NO_DISMISS: - bis r11, r31, r12 // Save PS - bge r25, UNALIGN_NO_DISMISS_10_ // no stack swap needed if cm=kern - - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r12 // Set new PS - mfpr r30, pt_ksp - -UNALIGN_NO_DISMISS_10_: - mfpr r25, ev5__va // Unlock VA - lda sp, 0-osfsf_c_size(sp)// allocate stack space - - mtpr r25, pt0 // Stash VA - stq r18, osfsf_a2(sp) // a2 - - stq r11, osfsf_ps(sp) // save old ps - srl r13, mm_stat_v_opcode-mm_stat_v_ra, r25// Isolate opcode - - stq r29, osfsf_gp(sp) // save gp - addq r14, 4, r14 // inc PC past the ld/st - - stq r17, osfsf_a1(sp) // a1 - and r25, mm_stat_m_opcode, r17// Clean opocde for a1 - - stq r16, osfsf_a0(sp) // save regs - mfpr r16, pt0 // a0 <- va/unlock - - stq r14, osfsf_pc(sp) // save pc - mfpr r25, pt_entuna // get entry point - - - bis r12, r31, r11 // update ps - br r31, unalign_trap_cont - - - - -// .sbttl "DFAULT - Dstream Fault Trap Entry Point" - -//+ -// DFAULT - offset 0380 -// Entry: -// Vectored into via hardware trap on dstream fault or sign check error on DVA. -// -// Function: -// Ignore faults on FETCH/FETCH_M -// Check for DFAULT in PAL -// Build stack frame -// a0 <- Faulting VA -// a1 <- MMCSR (1 for ACV, 2 for FOR, 4 for FOW) -// a2 <- R/W -// vector via entMM -// -//- - HDW_VECTOR(PAL_D_FAULT_ENTRY) -Trap_Dfault: -// DEBUGSTORE(0x48) - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - mfpr r13, ev5__mm_stat // Get mmstat - mfpr r8, exc_addr // get pc, preserve r14 - - srl r13, mm_stat_v_opcode, r9 // Shift opcode field to ls bits - blbs r8, dfault_in_pal - - bis r8, r31, r14 // move exc_addr to correct place - bis r11, r31, r12 // Save PS - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - and r9, mm_stat_m_opcode, r9 // Clean all but opcode - - cmpeq r9, evx_opc_sync, r9 // Is the opcode fetch/fetchm? - bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault - - //dismiss exception if load to r31/f31 - blbs r13, dfault_no_dismiss // mm_stat<0> set on store or fetchm - - // not a store or fetch, must be a load - srl r13, mm_stat_v_ra, r9 // Shift rnum to low bits - - and r9, 0x1F, r9 // isolate rnum - nop - - cmpeq r9, 0x1F, r9 // Is the rnum r31 or f31? - bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault - -dfault_no_dismiss: - and r13, 0xf, r13 // Clean extra bits in mm_stat - bge r25, dfault_trap_cont // no stack swap needed if cm=kern - - - mtpr r30, pt_usp // save user stack - bis r31, r31, r12 // Set new PS - - mfpr r30, pt_ksp - br r31, dfault_trap_cont - - - - - -// .sbttl "MCHK - Machine Check Trap Entry Point" - -//+ -// MCHK - offset 0400 -// Entry: -// Vectored into via hardware trap on machine check. -// -// Function: -// -//- - - HDW_VECTOR(PAL_MCHK_ENTRY) -Trap_Mchk: - DEBUGSTORE(0x49) - mtpr r31, ic_flush_ctl // Flush the Icache - br r31, sys_machine_check - - - - -// .sbttl "OPCDEC - Illegal Opcode Trap Entry Point" - -//+ -// OPCDEC - offset 0480 -// Entry: -// Vectored into via hardware trap on illegal opcode. -// -// Build stack frame -// a0 <- code -// a1 <- unpred -// a2 <- unpred -// vector via entIF -// -//- - - HDW_VECTOR(PAL_OPCDEC_ENTRY) -Trap_Opcdec: - DEBUGSTORE(0x4a) -//simos DEBUG_EXC_ADDR() - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - mfpr r14, exc_addr // get pc - blbs r14, pal_pal_bug_check // check opcdec in palmode - - bis r11, r31, r12 // Save PS - bge r25, TRAP_OPCDEC_10_ // no stack swap needed if cm=kern - - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r12 // Set new PS - mfpr r30, pt_ksp - -TRAP_OPCDEC_10_: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - addq r14, 4, r14 // inc pc - - stq r16, osfsf_a0(sp) // save regs - bis r31, osf_a0_opdec, r16 // set a0 - - stq r11, osfsf_ps(sp) // save old ps - mfpr r13, pt_entif // get entry point - - stq r18, osfsf_a2(sp) // a2 - stq r17, osfsf_a1(sp) // a1 - - stq r29, osfsf_gp(sp) // save gp - stq r14, osfsf_pc(sp) // save pc - - bis r12, r31, r11 // update ps - mtpr r13, exc_addr // load exc_addr with entIF - // 1 cycle to hw_rei, E1 - - mfpr r29, pt_kgp // get the kgp, E1 - - hw_rei_spe // done, E1 - - - - - - -// .sbttl "ARITH - Arithmetic Exception Trap Entry Point" - -//+ -// ARITH - offset 0500 -// Entry: -// Vectored into via hardware trap on arithmetic excpetion. -// -// Function: -// Build stack frame -// a0 <- exc_sum -// a1 <- exc_mask -// a2 <- unpred -// vector via entArith -// -//- - HDW_VECTOR(PAL_ARITH_ENTRY) -Trap_Arith: - DEBUGSTORE(0x4b) - and r11, osfps_m_mode, r12 // get mode bit - mfpr r31, ev5__va // unlock mbox - - bis r11, r31, r25 // save ps - mfpr r14, exc_addr // get pc - - nop - blbs r14, pal_pal_bug_check // arith trap from PAL - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - beq r12, TRAP_ARITH_10_ // if zero we are in kern now - - bis r31, r31, r25 // set the new ps - mtpr r30, pt_usp // save user stack - - nop - mfpr r30, pt_ksp // get kern stack - -TRAP_ARITH_10_: lda sp, 0-osfsf_c_size(sp) // allocate stack space - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - nop // Pad current mode write and stq - mfpr r13, ev5__exc_sum // get the exc_sum - - mfpr r12, pt_entarith - stq r14, osfsf_pc(sp) // save pc - - stq r17, osfsf_a1(sp) - mfpr r17, ev5__exc_mask // Get exception register mask IPR - no mtpr exc_sum in next cycle - - stq r11, osfsf_ps(sp) // save ps - bis r25, r31, r11 // set new ps - - stq r16, osfsf_a0(sp) // save regs - srl r13, exc_sum_v_swc, r16// shift data to correct position - - stq r18, osfsf_a2(sp) -// pvc_violate 354 // ok, but make sure reads of exc_mask/sum are not in same trap shadow - mtpr r31, ev5__exc_sum // Unlock exc_sum and exc_mask - - stq r29, osfsf_gp(sp) - mtpr r12, exc_addr // Set new PC - 1 bubble to hw_rei - E1 - - mfpr r29, pt_kgp // get the kern gp - E1 - hw_rei_spe // done - E1 - - - - - - -// .sbttl "FEN - Illegal Floating Point Operation Trap Entry Point" - -//+ -// FEN - offset 0580 -// Entry: -// Vectored into via hardware trap on illegal FP op. -// -// Function: -// Build stack frame -// a0 <- code -// a1 <- unpred -// a2 <- unpred -// vector via entIF -// -//- - - HDW_VECTOR(PAL_FEN_ENTRY) -Trap_Fen: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - mfpr r14, exc_addr // get pc - blbs r14, pal_pal_bug_check // check opcdec in palmode - - mfpr r13, ev5__icsr - nop - - bis r11, r31, r12 // Save PS - bge r25, TRAP_FEN_10_ // no stack swap needed if cm=kern - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r12 // Set new PS - mfpr r30, pt_ksp - -TRAP_FEN_10_: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - srl r13, icsr_v_fpe, r25 // Shift FP enable to bit 0 - - - stq r16, osfsf_a0(sp) // save regs - mfpr r13, pt_entif // get entry point - - stq r18, osfsf_a2(sp) // a2 - stq r11, osfsf_ps(sp) // save old ps - - stq r29, osfsf_gp(sp) // save gp - bis r12, r31, r11 // set new ps - - stq r17, osfsf_a1(sp) // a1 - blbs r25,fen_to_opcdec // If FP is enabled, this is really OPCDEC. - - bis r31, osf_a0_fen, r16 // set a0 - stq r14, osfsf_pc(sp) // save pc - - mtpr r13, exc_addr // load exc_addr with entIF - // 1 cycle to hw_rei -E1 - - mfpr r29, pt_kgp // get the kgp -E1 - - hw_rei_spe // done -E1 - -// FEN trap was taken, but the fault is really opcdec. - ALIGN_BRANCH -fen_to_opcdec: - addq r14, 4, r14 // save PC+4 - bis r31, osf_a0_opdec, r16 // set a0 - - stq r14, osfsf_pc(sp) // save pc - mtpr r13, exc_addr // load exc_addr with entIF - // 1 cycle to hw_rei - - mfpr r29, pt_kgp // get the kgp - hw_rei_spe // done - - - -// .sbttl "Misc handlers" - // Start area for misc code. -//+ -//dfault_trap_cont -// A dfault trap has been taken. The sp has been updated if necessary. -// Push a stack frame a vector via entMM. -// -// Current state: -// r12 - new PS -// r13 - MMstat -// VA - locked -// -//- - ALIGN_BLOCK -dfault_trap_cont: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - mfpr r25, ev5__va // Fetch VA/unlock - - stq r18, osfsf_a2(sp) // a2 - and r13, 1, r18 // Clean r/w bit for a2 - - stq r16, osfsf_a0(sp) // save regs - bis r25, r31, r16 // a0 <- va - - stq r17, osfsf_a1(sp) // a1 - srl r13, 1, r17 // shift fault bits to right position - - stq r11, osfsf_ps(sp) // save old ps - bis r12, r31, r11 // update ps - - stq r14, osfsf_pc(sp) // save pc - mfpr r25, pt_entmm // get entry point - - stq r29, osfsf_gp(sp) // save gp - cmovlbs r17, 1, r17 // a2. acv overrides fox. - - mtpr r25, exc_addr // load exc_addr with entMM - // 1 cycle to hw_rei - mfpr r29, pt_kgp // get the kgp - - hw_rei_spe // done - -//+ -//unalign_trap_cont -// An unalign trap has been taken. Just need to finish up a few things. -// -// Current state: -// r25 - entUna -// r13 - shifted MMstat -// -//- - ALIGN_BLOCK -unalign_trap_cont: - mtpr r25, exc_addr // load exc_addr with entUna - // 1 cycle to hw_rei - - - mfpr r29, pt_kgp // get the kgp - and r13, mm_stat_m_ra, r18 // Clean Ra for a2 - - hw_rei_spe // done - - - -//+ -// dfault_in_pal -// Dfault trap was taken, exc_addr points to a PAL PC. -// r9 - mmstat<opcode> right justified -// r8 - exception address -// -// These are the cases: -// opcode was STQ -- from a stack builder, KSP not valid halt -// r14 - original exc_addr -// r11 - original PS -// opcode was STL_C -- rti or retsys clear lock_flag by stack write, -// KSP not valid halt -// r11 - original PS -// r14 - original exc_addr -// opcode was LDQ -- retsys or rti stack read, KSP not valid halt -// r11 - original PS -// r14 - original exc_addr -// opcode was HW_LD -- itbmiss or dtbmiss, bugcheck due to fault on page tables -// r10 - original exc_addr -// r11 - original PS -// -// -//- - ALIGN_BLOCK -dfault_in_pal: - DEBUGSTORE(0x50) - bic r8, 3, r8 // Clean PC - mfpr r9, pal_base - - mfpr r31, va // unlock VA -#if real_mm != 0 - // if not real_mm, should never get here from miss flows - - subq r9, r8, r8 // pal_base - offset - - lda r9, pal_itb_ldq-pal_base(r8) - nop - - beq r9, dfault_do_bugcheck - lda r9, pal_dtb_ldq-pal_base(r8) - - beq r9, dfault_do_bugcheck -#endif - -// -// KSP invalid halt case -- -ksp_inval_halt: - DEBUGSTORE(76) - bic r11, osfps_m_mode, r11 // set ps to kernel mode - mtpr r0, pt0 - - mtpr r31, dtb_cm // Make sure that the CM IPRs are all kernel mode - mtpr r31, ips - - mtpr r14, exc_addr // Set PC to instruction that caused trouble -//orig pvc_jsr updpcb, bsr=1 - bsr r0, pal_update_pcb // update the pcb - - lda r0, hlt_c_ksp_inval(r31) // set halt code to hw halt - br r31, sys_enter_console // enter the console - - ALIGN_BRANCH -dfault_do_bugcheck: - bis r10, r31, r14 // bugcheck expects exc_addr in r14 - br r31, pal_pal_bug_check - - - ALIGN_BLOCK -//+ -// dfault_fetch_ldr31_err - ignore faults on fetch(m) and loads to r31/f31 -// On entry - -// r14 - exc_addr -// VA is locked -// -//- -dfault_fetch_ldr31_err: - mtpr r11, ev5__dtb_cm - mtpr r11, ev5__ps // Make sure ps hasn't changed - - mfpr r31, va // unlock the mbox - addq r14, 4, r14 // inc the pc to skip the fetch - - mtpr r14, exc_addr // give ibox new PC - mfpr r31, pt0 // pad exc_addr write - - hw_rei - - - - ALIGN_BLOCK -//+ -// sys_from_kern -// callsys from kernel mode - OS bugcheck machine check -// -//- -sys_from_kern: - mfpr r14, exc_addr // PC points to call_pal - subq r14, 4, r14 - - lda r25, mchk_c_os_bugcheck(r31) // fetch mchk code - br r31, pal_pal_mchk - - -// .sbttl "Continuation of long call_pal flows" - ALIGN_BLOCK -//+ -// wrent_tbl -// Table to write *int in paltemps. -// 4 instructions/entry -// r16 has new value -// -//- -wrent_tbl: -//orig pvc_jsr wrent, dest=1 - nop - mtpr r16, pt_entint - - mfpr r31, pt0 // Pad for mt->mf paltemp rule - hw_rei - - -//orig pvc_jsr wrent, dest=1 - nop - mtpr r16, pt_entarith - - mfpr r31, pt0 // Pad for mt->mf paltemp rule - hw_rei - - -//orig pvc_jsr wrent, dest=1 - nop - mtpr r16, pt_entmm - - mfpr r31, pt0 // Pad for mt->mf paltemp rule - hw_rei - - -//orig pvc_jsr wrent, dest=1 - nop - mtpr r16, pt_entif - - mfpr r31, pt0 // Pad for mt->mf paltemp rule - hw_rei - - -//orig pvc_jsr wrent, dest=1 - nop - mtpr r16, pt_entuna - - mfpr r31, pt0 // Pad for mt->mf paltemp rule - hw_rei - - -//orig pvc_jsr wrent, dest=1 - nop - mtpr r16, pt_entsys - - mfpr r31, pt0 // Pad for mt->mf paltemp rule - hw_rei - - ALIGN_BLOCK -//+ -// tbi_tbl -// Table to do tbi instructions -// 4 instructions per entry -//- -tbi_tbl: - // -2 tbia -//orig pvc_jsr tbi, dest=1 - mtpr r31, ev5__dtb_ia // Flush DTB - mtpr r31, ev5__itb_ia // Flush ITB - -#if icflush_on_tbix != 0 - - - br r31, pal_ic_flush // Flush Icache -#else - - hw_rei_stall -#endif - - nop // Pad table - - // -1 tbiap -//orig pvc_jsr tbi, dest=1 - mtpr r31, ev5__dtb_iap // Flush DTB - mtpr r31, ev5__itb_iap // Flush ITB - -#if icflush_on_tbix != 0 - - - br r31, pal_ic_flush // Flush Icache -#else - - hw_rei_stall -#endif - - nop // Pad table - - - // 0 unused -//orig pvc_jsr tbi, dest=1 - hw_rei // Pad table - nop - nop - nop - - - // 1 tbisi -//orig pvc_jsr tbi, dest=1 -#if icflush_on_tbix != 0 - - - - nop - br r31, pal_ic_flush_and_tbisi // Flush Icache - nop - nop // Pad table -#else - - nop - nop - mtpr r17, ev5__itb_is // Flush ITB - hw_rei_stall -#endif - - - - // 2 tbisd -//orig pvc_jsr tbi, dest=1 - mtpr r17, ev5__dtb_is // Flush DTB. - nop - - nop - hw_rei_stall - - - // 3 tbis -//orig pvc_jsr tbi, dest=1 - mtpr r17, ev5__dtb_is // Flush DTB -#if icflush_on_tbix != 0 - - - br r31, pal_ic_flush_and_tbisi // Flush Icache and ITB -#else - br r31, tbi_finish - ALIGN_BRANCH -tbi_finish: - mtpr r17, ev5__itb_is // Flush ITB - hw_rei_stall -#endif - - - - ALIGN_BLOCK -//+ -// bpt_bchk_common: -// Finish up the bpt/bchk instructions -//- -bpt_bchk_common: - stq r18, osfsf_a2(sp) // a2 - mfpr r13, pt_entif // get entry point - - stq r12, osfsf_ps(sp) // save old ps - stq r14, osfsf_pc(sp) // save pc - - stq r29, osfsf_gp(sp) // save gp - mtpr r13, exc_addr // load exc_addr with entIF - // 1 cycle to hw_rei - - mfpr r29, pt_kgp // get the kgp - - - hw_rei_spe // done - - - ALIGN_BLOCK -//+ -// rti_to_user -// Finish up the rti instruction -//- -rti_to_user: - mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles - mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei - - mtpr r31, ev5__ipl // set the ipl. No hw_rei for 2 cycles - mtpr r25, pt_ksp // save off incase RTI to user - - mfpr r30, pt_usp - hw_rei_spe // and back - - - ALIGN_BLOCK -//+ -// rti_to_kern -// Finish up the rti instruction -//- -rti_to_kern: - and r12, osfps_m_ipl, r11 // clean ps - mfpr r12, pt_intmask // get int mask - - extbl r12, r11, r12 // get mask for this ipl - mtpr r25, pt_ksp // save off incase RTI to user - - mtpr r12, ev5__ipl // set the new ipl. - or r25, r31, sp // sp - -// pvc_violate 217 // possible hidden mt->mf ipl not a problem in callpals - hw_rei - - ALIGN_BLOCK -//+ -// swpctx_cont -// Finish up the swpctx instruction -//- - -swpctx_cont: -#if ev5_p1 != 0 - - - bic r25, r24, r25 // clean icsr<FPE> - get_impure r8 // get impure pointer - - sll r12, icsr_v_fpe, r12 // shift new fen to pos - fix_impure_ipr r8 // adjust impure pointer - - restore_reg1 pmctr_ctl, r8, r8, ipr=1 // "ldqp" - get pmctr_ctl bits - srl r23, 32, r24 // move asn to low asn pos - - ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr - srl r22, osfpcb_v_pme, r22 // get pme down to bit 0 - - or r25, r12, r25 // icsr with new fen - sll r24, itb_asn_v_asn, r12 - -#else - - bic r25, r24, r25 // clean icsr<FPE,PMP> - sll r12, icsr_v_fpe, r12 // shift new fen to pos - - ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr - srl r22, osfpcb_v_pme, r22 // get pme down to bit 0 - - or r25, r12, r25 // icsr with new fen - srl r23, 32, r24 // move asn to low asn pos - - and r22, 1, r22 - sll r24, itb_asn_v_asn, r12 - - sll r22, icsr_v_pmp, r22 - nop - - or r25, r22, r25 // icsr with new pme -#endif - - sll r24, dtb_asn_v_asn, r24 - - subl r23, r13, r13 // gen new cc offset - mtpr r12, itb_asn // no hw_rei_stall in 0,1,2,3,4 - - mtpr r24, dtb_asn // Load up new ASN - mtpr r25, icsr // write the icsr - - sll r14, page_offset_size_bits, r14 // Move PTBR into internal position. - ldqp r25, osfpcb_q_usp(r16) // get new usp - - insll r13, 4, r13 // >> 32 -// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow - mtpr r14, pt_ptbr // load the new ptbr - - mtpr r13, cc // set new offset - ldqp r30, osfpcb_q_ksp(r16) // get new ksp - -// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow - mtpr r25, pt_usp // save usp - -#if ev5_p1 != 0 - - - blbc r8, no_pm_change // if monitoring all processes -- no need to change pm - - // otherwise, monitoring select processes - update pm - lda r25, 0x3F(r31) - cmovlbc r22, r31, r8 // if pme set, disable counters, otherwise use saved encodings - - sll r25, pmctr_v_ctl2, r25 // create ctl field bit mask - mfpr r22, ev5__pmctr - - and r8, r25, r8 // mask new ctl value - bic r22, r25, r22 // clear ctl field in pmctr - - or r8, r22, r8 - mtpr r8, ev5__pmctr - -no_pm_change: -#endif - - -#if osf_chm_fix != 0 - - - p4_fixup_hw_rei_stall // removes this section for Pass 4 by placing a hw_rei_stall here - -#if build_fixed_image != 0 - - - hw_rei_stall -#else - - mfpr r9, pt_pcbb // get FEN -#endif - - ldqp r9, osfpcb_q_fen(r9) - blbc r9, no_pm_change_10_ // skip if FEN disabled - - mb // ensure no outstanding fills - lda r12, 1<<dc_mode_v_dc_ena(r31) - mtpr r12, dc_mode // turn dcache on so we can flush it - nop // force correct slotting - mfpr r31, pt0 // no mbox instructions in 1,2,3,4 - mfpr r31, pt0 // no mbox instructions in 1,2,3,4 - mfpr r31, pt0 // no mbox instructions in 1,2,3,4 - mfpr r31, pt0 // no mbox instructions in 1,2,3,4 - - lda r8, 0(r31) // flood the dcache with junk data -no_pm_change_5_: ldqp r31, 0(r8) - lda r8, 0x20(r8) // touch each cache block - srl r8, 13, r9 - blbc r9, no_pm_change_5_ - - mb // ensure no outstanding fills - mtpr r31, dc_mode // turn the dcache back off - nop // force correct slotting - mfpr r31, pt0 // no hw_rei_stall in 0,1 -#endif - - -no_pm_change_10_: hw_rei_stall // back we go - - ALIGN_BLOCK -//+ -// swppal_cont - finish up the swppal call_pal -//- - -swppal_cont: - mfpr r2, pt_misc // get misc bits - sll r0, pt_misc_v_switch, r0 // get the "I've switched" bit - or r2, r0, r2 // set the bit - mtpr r31, ev5__alt_mode // ensure alt_mode set to 0 (kernel) - mtpr r2, pt_misc // update the chip - - or r3, r31, r4 - mfpr r3, pt_impure // pass pointer to the impure area in r3 -//orig fix_impure_ipr r3 // adjust impure pointer for ipr read -//orig restore_reg1 bc_ctl, r1, r3, ipr=1 // pass cns_bc_ctl in r1 -//orig restore_reg1 bc_config, r2, r3, ipr=1 // pass cns_bc_config in r2 -//orig unfix_impure_ipr r3 // restore impure pointer - lda r3, CNS_Q_IPR(r3) - RESTORE_SHADOW(r1,CNS_Q_BC_CTL,r3); - RESTORE_SHADOW(r1,CNS_Q_BC_CFG,r3); - lda r3, -CNS_Q_IPR(r3) - - or r31, r31, r0 // set status to success -// pvc_violate 1007 - jmp r31, (r4) // and call our friend, it's her problem now - - -swppal_fail: - addq r0, 1, r0 // set unknown pal or not loaded - hw_rei // and return - - -// .sbttl "Memory management" - - ALIGN_BLOCK -//+ -//foe_ipte_handler -// IFOE detected on level 3 pte, sort out FOE vs ACV -// -// on entry: -// with -// R8 = pte -// R10 = pc -// -// Function -// Determine TNV vs ACV vs FOE. Build stack and dispatch -// Will not be here if TNV. -//- - -foe_ipte_handler: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - bis r11, r31, r12 // Save PS for stack write - bge r25, foe_ipte_handler_10_ // no stack swap needed if cm=kern - - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r11 // Set new PS - mfpr r30, pt_ksp - - srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern - nop - -foe_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0> - lda sp, 0-osfsf_c_size(sp)// allocate stack space - - or r10, r31, r14 // Save pc/va in case TBmiss or fault on stack - mfpr r13, pt_entmm // get entry point - - stq r16, osfsf_a0(sp) // a0 - or r14, r31, r16 // pass pc/va as a0 - - stq r17, osfsf_a1(sp) // a1 - nop - - stq r18, osfsf_a2(sp) // a2 - lda r17, mmcsr_c_acv(r31) // assume ACV - - stq r16, osfsf_pc(sp) // save pc - cmovlbs r25, mmcsr_c_foe, r17 // otherwise FOE - - stq r12, osfsf_ps(sp) // save ps - subq r31, 1, r18 // pass flag of istream as a2 - - stq r29, osfsf_gp(sp) - mtpr r13, exc_addr // set vector address - - mfpr r29, pt_kgp // load kgp - hw_rei_spe // out to exec - - ALIGN_BLOCK -//+ -//invalid_ipte_handler -// TNV detected on level 3 pte, sort out TNV vs ACV -// -// on entry: -// with -// R8 = pte -// R10 = pc -// -// Function -// Determine TNV vs ACV. Build stack and dispatch. -//- - -invalid_ipte_handler: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - bis r11, r31, r12 // Save PS for stack write - bge r25, invalid_ipte_handler_10_ // no stack swap needed if cm=kern - - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r11 // Set new PS - mfpr r30, pt_ksp - - srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern - nop - -invalid_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0> - lda sp, 0-osfsf_c_size(sp)// allocate stack space - - or r10, r31, r14 // Save pc/va in case TBmiss on stack - mfpr r13, pt_entmm // get entry point - - stq r16, osfsf_a0(sp) // a0 - or r14, r31, r16 // pass pc/va as a0 - - stq r17, osfsf_a1(sp) // a1 - nop - - stq r18, osfsf_a2(sp) // a2 - and r25, 1, r17 // Isolate kre - - stq r16, osfsf_pc(sp) // save pc - xor r17, 1, r17 // map to acv/tnv as a1 - - stq r12, osfsf_ps(sp) // save ps - subq r31, 1, r18 // pass flag of istream as a2 - - stq r29, osfsf_gp(sp) - mtpr r13, exc_addr // set vector address - - mfpr r29, pt_kgp // load kgp - hw_rei_spe // out to exec - - - - - ALIGN_BLOCK -//+ -//invalid_dpte_handler -// INVALID detected on level 3 pte, sort out TNV vs ACV -// -// on entry: -// with -// R10 = va -// R8 = pte -// R9 = mm_stat -// PT6 = pc -// -// Function -// Determine TNV vs ACV. Build stack and dispatch -//- - - -invalid_dpte_handler: - mfpr r12, pt6 - blbs r12, tnv_in_pal // Special handler if original faulting reference was in PALmode - - bis r12, r31, r14 // save PC in case of tbmiss or fault - srl r9, mm_stat_v_opcode, r25 // shift opc to <0> - - mtpr r11, pt0 // Save PS for stack write - and r25, mm_stat_m_opcode, r25 // isolate opcode - - cmpeq r25, evx_opc_sync, r25 // is it FETCH/FETCH_M? - blbs r25, nmiss_fetch_ldr31_err // yes - - //dismiss exception if load to r31/f31 - blbs r9, invalid_dpte_no_dismiss // mm_stat<0> set on store or fetchm - - // not a store or fetch, must be a load - srl r9, mm_stat_v_ra, r25 // Shift rnum to low bits - - and r25, 0x1F, r25 // isolate rnum - nop - - cmpeq r25, 0x1F, r25 // Is the rnum r31 or f31? - bne r25, nmiss_fetch_ldr31_err // Yes, dismiss the fault - -invalid_dpte_no_dismiss: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - bge r25, invalid_dpte_no_dismiss_10_ // no stack swap needed if cm=kern - - srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern - mtpr r30, pt_usp // save user stack - - bis r31, r31, r11 // Set new PS - mfpr r30, pt_ksp - -invalid_dpte_no_dismiss_10_: srl r8, osfpte_v_kre, r12 // get kre to <0> - lda sp, 0-osfsf_c_size(sp)// allocate stack space - - or r10, r31, r25 // Save va in case TBmiss on stack - and r9, 1, r13 // save r/w flag - - stq r16, osfsf_a0(sp) // a0 - or r25, r31, r16 // pass va as a0 - - stq r17, osfsf_a1(sp) // a1 - or r31, mmcsr_c_acv, r17 // assume acv - - srl r12, osfpte_v_kwe-osfpte_v_kre, r25 // get write enable to <0> - stq r29, osfsf_gp(sp) - - stq r18, osfsf_a2(sp) // a2 - cmovlbs r13, r25, r12 // if write access move acv based on write enable - - or r13, r31, r18 // pass flag of dstream access and read vs write - mfpr r25, pt0 // get ps - - stq r14, osfsf_pc(sp) // save pc - mfpr r13, pt_entmm // get entry point - - stq r25, osfsf_ps(sp) // save ps - mtpr r13, exc_addr // set vector address - - mfpr r29, pt_kgp // load kgp - cmovlbs r12, mmcsr_c_tnv, r17 // make p2 be tnv if access ok else acv - - hw_rei_spe // out to exec - -//+ -// -// We come here if we are erring on a dtb_miss, and the instr is a -// fetch, fetch_m, of load to r31/f31. -// The PC is incremented, and we return to the program. -// essentially ignoring the instruction and error. -// -//- - ALIGN_BLOCK -nmiss_fetch_ldr31_err: - mfpr r12, pt6 - addq r12, 4, r12 // bump pc to pc+4 - - mtpr r12, exc_addr // and set entry point - mfpr r31, pt0 // pad exc_addr write - - hw_rei // - - ALIGN_BLOCK -//+ -// double_pte_inv -// We had a single tbmiss which turned into a double tbmiss which found -// an invalid PTE. Return to single miss with a fake pte, and the invalid -// single miss flow will report the error. -// -// on entry: -// r21 PTE -// r22 available -// VA IPR locked with original fault VA -// pt4 saved r21 -// pt5 saved r22 -// pt6 original exc_addr -// -// on return to tbmiss flow: -// r8 fake PTE -// -// -//- -double_pte_inv: - srl r21, osfpte_v_kre, r21 // get the kre bit to <0> - mfpr r22, exc_addr // get the pc - - lda r22, 4(r22) // inc the pc - lda r8, osfpte_m_prot(r31) // make a fake pte with xre and xwe set - - cmovlbc r21, r31, r8 // set to all 0 for acv if pte<kre> is 0 - mtpr r22, exc_addr // set for rei - - mfpr r21, pt4 // restore regs - mfpr r22, pt5 // restore regs - - hw_rei // back to tb miss - - ALIGN_BLOCK -//+ -//tnv_in_pal -// The only places in pal that ld or store are the -// stack builders, rti or retsys. Any of these mean we -// need to take a ksp not valid halt. -// -//- -tnv_in_pal: - - - br r31, ksp_inval_halt - - -// .sbttl "Icache flush routines" - - ALIGN_BLOCK -//+ -// Common Icache flush routine. -// -// -//- -pal_ic_flush: - nop - mtpr r31, ev5__ic_flush_ctl // Icache flush - E1 - nop - nop - -// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20) - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 10 - - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 20 - - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 30 - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 40 - - nop - nop - -one_cycle_and_hw_rei: - nop - nop - - hw_rei_stall - -#if icflush_on_tbix != 0 - - - ALIGN_BLOCK - -//+ -// Common Icache flush and ITB invalidate single routine. -// ITBIS and hw_rei_stall must be in same octaword. -// r17 - has address to invalidate -// -//- -PAL_IC_FLUSH_AND_TBISI: - nop - mtpr r31, ev5__ic_flush_ctl // Icache flush - E1 - nop - nop - -// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20) - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 10 - - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 20 - - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 30 - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 40 - - - nop - nop - - nop - nop - - // A quadword is 64 bits, so an octaword is 128 bits -> 16 bytes -> 4 instructions - // 44 nops plus 4 instructions before it is 48 instructions. - // Since this routine started on a 32-byte (8 instruction) boundary, - // the following 2 instructions will be in the same octword as required. -// ALIGN_BRANCH - mtpr r17, ev5__itb_is // Flush ITB - hw_rei_stall - -#endif - - ALIGN_BLOCK -//+ -//osfpal_calpal_opcdec -// Here for all opcdec CALL_PALs -// -// Build stack frame -// a0 <- code -// a1 <- unpred -// a2 <- unpred -// vector via entIF -// -//- - -osfpal_calpal_opcdec: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - mfpr r14, exc_addr // get pc - nop - - bis r11, r31, r12 // Save PS for stack write - bge r25, osfpal_calpal_opcdec_10_ // no stack swap needed if cm=kern - - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r11 // Set new PS - mfpr r30, pt_ksp - -osfpal_calpal_opcdec_10_: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - nop - - stq r16, osfsf_a0(sp) // save regs - bis r31, osf_a0_opdec, r16 // set a0 - - stq r18, osfsf_a2(sp) // a2 - mfpr r13, pt_entif // get entry point - - stq r12, osfsf_ps(sp) // save old ps - stq r17, osfsf_a1(sp) // a1 - - stq r14, osfsf_pc(sp) // save pc - nop - - stq r29, osfsf_gp(sp) // save gp - mtpr r13, exc_addr // load exc_addr with entIF - // 1 cycle to hw_rei - - mfpr r29, pt_kgp // get the kgp - - - hw_rei_spe // done - - - - - -//+ -//pal_update_pcb -// Update the PCB with the current SP, AST, and CC info -// -// r0 - return linkage -//- - ALIGN_BLOCK - -pal_update_pcb: - mfpr r12, pt_pcbb // get pcbb - and r11, osfps_m_mode, r25 // get mode - beq r25, pal_update_pcb_10_ // in kern? no need to update user sp - mtpr r30, pt_usp // save user stack - stqp r30, osfpcb_q_usp(r12) // store usp - br r31, pal_update_pcb_20_ // join common -pal_update_pcb_10_: stqp r30, osfpcb_q_ksp(r12) // store ksp -pal_update_pcb_20_: rpcc r13 // get cyccounter - srl r13, 32, r14 // move offset - addl r13, r14, r14 // merge for new time - stlp r14, osfpcb_l_cc(r12) // save time - -//orig pvc_jsr updpcb, bsr=1, dest=1 - ret r31, (r0) - - - -#if remove_save_state == 0 - -// .sbttl "PAL_SAVE_STATE" -//+ -// -// Pal_save_state -// -// Function -// All chip state saved, all PT's, SR's FR's, IPR's -// -// -// Regs' on entry... -// -// R0 = halt code -// pt0 = r0 -// R1 = pointer to impure -// pt4 = r1 -// R3 = return addr -// pt5 = r3 -// -// register usage: -// r0 = halt_code -// r1 = addr of impure area -// r3 = return_address -// r4 = scratch -// -//- - - - ALIGN_BLOCK - .globl pal_save_state -pal_save_state: -// -// -// start of implementation independent save routine -// -// the impure area is larger than the addressibility of hw_ld and hw_st -// therefore, we need to play some games: The impure area -// is informally divided into the "machine independent" part and the -// "machine dependent" part. The state that will be saved in the -// "machine independent" part are gpr's, fpr's, hlt, flag, mchkflag (use (un)fix_impure_gpr macros). -// All others will be in the "machine dependent" part (use (un)fix_impure_ipr macros). -// The impure pointer will need to be adjusted by a different offset for each. The store/restore_reg -// macros will automagically adjust the offset correctly. -// - -// The distributed code is commented out and followed by corresponding SRC code. -// Beware: SAVE_IPR and RESTORE_IPR blow away r0(v0) - -//orig fix_impure_gpr r1 // adjust impure area pointer for stores to "gpr" part of impure area - lda r1, 0x200(r1) // Point to center of CPU segment -//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area flag - SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the valid flag -//orig store_reg1 hlt, r0, r1, ipr=1 - SAVE_GPR(r0,CNS_Q_HALT,r1) // Save the halt code - - mfpr r0, pt0 // get r0 back //orig -//orig store_reg1 0, r0, r1 // save r0 - SAVE_GPR(r0,CNS_Q_GPR+0x00,r1) // Save r0 - - mfpr r0, pt4 // get r1 back //orig -//orig store_reg1 1, r0, r1 // save r1 - SAVE_GPR(r0,CNS_Q_GPR+0x08,r1) // Save r1 - -//orig store_reg 2 // save r2 - SAVE_GPR(r2,CNS_Q_GPR+0x10,r1) // Save r2 - - mfpr r0, pt5 // get r3 back //orig -//orig store_reg1 3, r0, r1 // save r3 - SAVE_GPR(r0,CNS_Q_GPR+0x18,r1) // Save r3 - - // reason code has been saved - // r0 has been saved - // r1 has been saved - // r2 has been saved - // r3 has been saved - // pt0, pt4, pt5 have been lost - - // - // Get out of shadow mode - // - - mfpr r2, icsr // Get icsr //orig -//orig ldah r0, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location - ldah r0, (1<<(icsr_v_sde-16))(r31) - bic r2, r0, r0 // ICSR with SDE clear //orig - mtpr r0, icsr // Turn off SDE //orig - - mfpr r31, pt0 // SDE bubble cycle 1 //orig - mfpr r31, pt0 // SDE bubble cycle 2 //orig - mfpr r31, pt0 // SDE bubble cycle 3 //orig - nop //orig - - - // save integer regs R4-r31 -//orig #define t 4 -//orig .repeat 28 -//orig store_reg \t -//orig #define t t + 1 -//orig .endr - SAVE_GPR(r4,CNS_Q_GPR+0x20,r1) - SAVE_GPR(r5,CNS_Q_GPR+0x28,r1) - SAVE_GPR(r6,CNS_Q_GPR+0x30,r1) - SAVE_GPR(r7,CNS_Q_GPR+0x38,r1) - SAVE_GPR(r8,CNS_Q_GPR+0x40,r1) - SAVE_GPR(r9,CNS_Q_GPR+0x48,r1) - SAVE_GPR(r10,CNS_Q_GPR+0x50,r1) - SAVE_GPR(r11,CNS_Q_GPR+0x58,r1) - SAVE_GPR(r12,CNS_Q_GPR+0x60,r1) - SAVE_GPR(r13,CNS_Q_GPR+0x68,r1) - SAVE_GPR(r14,CNS_Q_GPR+0x70,r1) - SAVE_GPR(r15,CNS_Q_GPR+0x78,r1) - SAVE_GPR(r16,CNS_Q_GPR+0x80,r1) - SAVE_GPR(r17,CNS_Q_GPR+0x88,r1) - SAVE_GPR(r18,CNS_Q_GPR+0x90,r1) - SAVE_GPR(r19,CNS_Q_GPR+0x98,r1) - SAVE_GPR(r20,CNS_Q_GPR+0xA0,r1) - SAVE_GPR(r21,CNS_Q_GPR+0xA8,r1) - SAVE_GPR(r22,CNS_Q_GPR+0xB0,r1) - SAVE_GPR(r23,CNS_Q_GPR+0xB8,r1) - SAVE_GPR(r24,CNS_Q_GPR+0xC0,r1) - SAVE_GPR(r25,CNS_Q_GPR+0xC8,r1) - SAVE_GPR(r26,CNS_Q_GPR+0xD0,r1) - SAVE_GPR(r27,CNS_Q_GPR+0xD8,r1) - SAVE_GPR(r28,CNS_Q_GPR+0xE0,r1) - SAVE_GPR(r29,CNS_Q_GPR+0xE8,r1) - SAVE_GPR(r30,CNS_Q_GPR+0xF0,r1) - SAVE_GPR(r31,CNS_Q_GPR+0xF8,r1) - - // save all paltemp regs except pt0 - -//orig unfix_impure_gpr r1 // adjust impure area pointer for gpr stores -//orig fix_impure_ipr r1 // adjust impure area pointer for pt stores -//orig #define t 1 -//orig .repeat 23 -//orig store_reg \t , pal=1 -//orig #define t t + 1 -//orig .endr - - lda r1, -0x200(r1) // Restore the impure base address. - lda r1, CNS_Q_IPR(r1) // Point to the base of IPR area. - SAVE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle - SAVE_IPR(pt1,CNS_Q_PT+0x08,r1) - SAVE_IPR(pt2,CNS_Q_PT+0x10,r1) - SAVE_IPR(pt3,CNS_Q_PT+0x18,r1) - SAVE_IPR(pt4,CNS_Q_PT+0x20,r1) - SAVE_IPR(pt5,CNS_Q_PT+0x28,r1) - SAVE_IPR(pt6,CNS_Q_PT+0x30,r1) - SAVE_IPR(pt7,CNS_Q_PT+0x38,r1) - SAVE_IPR(pt8,CNS_Q_PT+0x40,r1) - SAVE_IPR(pt9,CNS_Q_PT+0x48,r1) - SAVE_IPR(pt10,CNS_Q_PT+0x50,r1) - SAVE_IPR(pt11,CNS_Q_PT+0x58,r1) - SAVE_IPR(pt12,CNS_Q_PT+0x60,r1) - SAVE_IPR(pt13,CNS_Q_PT+0x68,r1) - SAVE_IPR(pt14,CNS_Q_PT+0x70,r1) - SAVE_IPR(pt15,CNS_Q_PT+0x78,r1) - SAVE_IPR(pt16,CNS_Q_PT+0x80,r1) - SAVE_IPR(pt17,CNS_Q_PT+0x88,r1) - SAVE_IPR(pt18,CNS_Q_PT+0x90,r1) - SAVE_IPR(pt19,CNS_Q_PT+0x98,r1) - SAVE_IPR(pt20,CNS_Q_PT+0xA0,r1) - SAVE_IPR(pt21,CNS_Q_PT+0xA8,r1) - SAVE_IPR(pt22,CNS_Q_PT+0xB0,r1) - SAVE_IPR(pt23,CNS_Q_PT+0xB8,r1) - - // Restore shadow mode - mfpr r31, pt0 // pad write to icsr out of shadow of store (trap does not abort write) //orig - mfpr r31, pt0 //orig - mtpr r2, icsr // Restore original ICSR //orig - - mfpr r31, pt0 // SDE bubble cycle 1 //orig - mfpr r31, pt0 // SDE bubble cycle 2 //orig - mfpr r31, pt0 // SDE bubble cycle 3 //orig - nop //orig - - // save all integer shadow regs - -//orig #define t 8 -//orig .repeat 7 -//orig store_reg \t, shadow=1 -//orig #define t t + 1 -//orig .endr -//orig store_reg 25, shadow=1 - - SAVE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code - SAVE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1) - SAVE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1) - SAVE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1) - SAVE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1) - SAVE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1) - SAVE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1) - SAVE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1) - -//orig store_reg exc_addr, ipr=1 // save ipr -//orig store_reg pal_base, ipr=1 // save ipr -//orig store_reg mm_stat, ipr=1 // save ipr -//orig store_reg va, ipr=1 // save ipr -//orig store_reg icsr, ipr=1 // save ipr -//orig store_reg ipl, ipr=1 // save ipr -//orig store_reg ps, ipr=1 // save ipr -//orig store_reg itb_asn, ipr=1 // save ipr -//orig store_reg aster, ipr=1 // save ipr -//orig store_reg astrr, ipr=1 // save ipr -//orig store_reg sirr, ipr=1 // save ipr -//orig store_reg isr, ipr=1 // save ipr -//orig store_reg ivptbr, ipr=1 // save ipr -//orig store_reg mcsr, ipr=1 // save ipr -//orig store_reg dc_mode, ipr=1 // save ipr - - SAVE_IPR(excAddr,CNS_Q_EXC_ADDR,r1) - SAVE_IPR(palBase,CNS_Q_PAL_BASE,r1) - SAVE_IPR(mmStat,CNS_Q_MM_STAT,r1) - SAVE_IPR(va,CNS_Q_VA,r1) - SAVE_IPR(icsr,CNS_Q_ICSR,r1) - SAVE_IPR(ipl,CNS_Q_IPL,r1) - SAVE_IPR(ips,CNS_Q_IPS,r1) - SAVE_IPR(itbAsn,CNS_Q_ITB_ASN,r1) - SAVE_IPR(aster,CNS_Q_ASTER,r1) - SAVE_IPR(astrr,CNS_Q_ASTRR,r1) - SAVE_IPR(sirr,CNS_Q_SIRR,r1) - SAVE_IPR(isr,CNS_Q_ISR,r1) - SAVE_IPR(iVptBr,CNS_Q_IVPTBR,r1) - SAVE_IPR(mcsr,CNS_Q_MCSR,r1) - SAVE_IPR(dcMode,CNS_Q_DC_MODE,r1) - -//orig pvc_violate 379 // mf maf_mode after a store ok (pvc doesn't distinguish ld from st) -//orig store_reg maf_mode, ipr=1 // save ipr -- no mbox instructions for -//orig // PVC violation applies only to -pvc$osf35$379: // loads. HW_ST ok here, so ignore - SAVE_IPR(mafMode,CNS_Q_MAF_MODE,r1) // MBOX INST->MF MAF_MODE IN 0,1,2 - - - //the following iprs are informational only -- will not be restored - -//orig store_reg icperr_stat, ipr=1 -//orig store_reg pmctr, ipr=1 -//orig store_reg intid, ipr=1 -//orig store_reg exc_sum, ipr=1 -//orig store_reg exc_mask, ipr=1 -//orig ldah r14, 0xfff0(r31) -//orig zap r14, 0xE0, r14 // Get Cbox IPR base -//orig nop // pad mf dcperr_stat out of shadow of last store -//orig nop -//orig nop -//orig store_reg dcperr_stat, ipr=1 - - SAVE_IPR(icPerr,CNS_Q_ICPERR_STAT,r1) - SAVE_IPR(PmCtr,CNS_Q_PM_CTR,r1) - SAVE_IPR(intId,CNS_Q_INT_ID,r1) - SAVE_IPR(excSum,CNS_Q_EXC_SUM,r1) - SAVE_IPR(excMask,CNS_Q_EXC_MASK,r1) - ldah r14, 0xFFF0(zero) - zap r14, 0xE0, r14 // Get base address of CBOX IPRs - NOP // Pad mfpr dcPerr out of shadow of - NOP // last store - NOP - SAVE_IPR(dcPerr,CNS_Q_DCPERR_STAT,r1) - - // read cbox ipr state - -//orig mb -//orig ldqp r2, ev5__sc_ctl(r14) -//orig ldqp r13, ld_lock(r14) -//orig ldqp r4, ev5__sc_addr(r14) -//orig ldqp r5, ev5__ei_addr(r14) -//orig ldqp r6, ev5__bc_tag_addr(r14) -//orig ldqp r7, ev5__fill_syn(r14) -//orig bis r5, r4, r31 -//orig bis r7, r6, r31 // make sure previous loads finish before reading stat registers which unlock them -//orig ldqp r8, ev5__sc_stat(r14) // unlocks sc_stat,sc_addr -//orig ldqp r9, ev5__ei_stat(r14) // may unlock ei_*, bc_tag_addr, fill_syn -//orig ldqp r31, ev5__ei_stat(r14) // ensures it is really unlocked -//orig mb - -#ifndef SIMOS - mb - ldq_p r2, scCtl(r14) - ldq_p r13, ldLock(r14) - ldq_p r4, scAddr(r14) - ldq_p r5, eiAddr(r14) - ldq_p r6, bcTagAddr(r14) - ldq_p r7, fillSyn(r14) - bis r5, r4, zero // Make sure all loads complete before - bis r7, r6, zero // reading registers that unlock them. - ldq_p r8, scStat(r14) // Unlocks scAddr. - ldq_p r9, eiStat(r14) // Unlocks eiAddr, bcTagAddr, fillSyn. - ldq_p zero, eiStat(r14) // Make sure it is really unlocked. - mb -#endif -//orig // save cbox ipr state -//orig store_reg1 sc_ctl, r2, r1, ipr=1 -//orig store_reg1 ld_lock, r13, r1, ipr=1 -//orig store_reg1 sc_addr, r4, r1, ipr=1 -//orig store_reg1 ei_addr, r5, r1, ipr=1 -//orig store_reg1 bc_tag_addr, r6, r1, ipr=1 -//orig store_reg1 fill_syn, r7, r1, ipr=1 -//orig store_reg1 sc_stat, r8, r1, ipr=1 -//orig store_reg1 ei_stat, r9, r1, ipr=1 -//orig //bc_config? sl_rcv? - - SAVE_SHADOW(r2,CNS_Q_SC_CTL,r1); - SAVE_SHADOW(r13,CNS_Q_LD_LOCK,r1); - SAVE_SHADOW(r4,CNS_Q_SC_ADDR,r1); - SAVE_SHADOW(r5,CNS_Q_EI_ADDR,r1); - SAVE_SHADOW(r6,CNS_Q_BC_TAG_ADDR,r1); - SAVE_SHADOW(r7,CNS_Q_FILL_SYN,r1); - SAVE_SHADOW(r8,CNS_Q_SC_STAT,r1); - SAVE_SHADOW(r9,CNS_Q_EI_STAT,r1); - -// restore impure base //orig -//orig unfix_impure_ipr r1 - lda r1, -CNS_Q_IPR(r1) - -// save all floating regs //orig - mfpr r0, icsr // get icsr //orig - or r31, 1, r2 // get a one //orig -//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot //orig - sll r2, icsr_v_fpe, r2 // Shift it into ICSR<FPE> position - or r2, r0, r0 // set FEN on //orig - mtpr r0, icsr // write to icsr, enabling FEN //orig - -// map the save area virtually -// orig mtpr r31, dtb_ia // clear the dtb -// orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA -// orig sll r0, 32, r0 // shift to PFN field -// orig lda r2, 0xff(r31) // all read enable and write enable bits set -// orig sll r2, 8, r2 // move to PTE location -// orig addq r0, r2, r0 // combine with PFN -// orig mtpr r0, dtb_pte // Load PTE and set TB valid bit -// orig mtpr r1, dtb_tag // write TB tag - - mtpr r31, dtbIa // Clear all DTB entries - srl r1, va_s_off, r0 // Clean off byte-within-page offset - sll r0, pte_v_pfn, r0 // Shift to form PFN - lda r0, pte_m_prot(r0) // Set all read/write enable bits - mtpr r0, dtbPte // Load the PTE and set valid - mtpr r1, dtbTag // Write the PTE and tag into the DTB - - -//orig // map the next page too - in case the impure area crosses a page boundary -//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page -//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA -//orig sll r0, 32, r0 // shift to PFN field -//orig lda r2, 0xff(r31) // all read enable and write enable bits set -//orig sll r2, 8, r2 // move to PTE location -//orig addq r0, r2, r0 // combine with PFN -//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit -//orig mtpr r4, dtb_tag // write TB tag - - lda r4, (1<<va_s_off)(r1) // Generate address for next page - srl r4, va_s_off, r0 // Clean off byte-within-page offset - sll r0, pte_v_pfn, r0 // Shift to form PFN - lda r0, pte_m_prot(r0) // Set all read/write enable bits - mtpr r0, dtbPte // Load the PTE and set valid - mtpr r4, dtbTag // Write the PTE and tag into the DTB - - sll r31, 0, r31 // stall cycle 1 // orig - sll r31, 0, r31 // stall cycle 2 // orig - sll r31, 0, r31 // stall cycle 3 // orig - nop // orig - -//orig // add offset for saving fpr regs -//orig fix_impure_gpr r1 - - lda r1, 0x200(r1) // Point to center of CPU segment - -// now save the regs - F0-F31 - -//orig #define t 0 -//orig .repeat 32 -//orig store_reg \t , fpu=1 -//orig #define t t + 1 -//orig .endr - - mf_fpcr f0 // original - - SAVE_FPR(f0,CNS_Q_FPR+0x00,r1) - SAVE_FPR(f1,CNS_Q_FPR+0x08,r1) - SAVE_FPR(f2,CNS_Q_FPR+0x10,r1) - SAVE_FPR(f3,CNS_Q_FPR+0x18,r1) - SAVE_FPR(f4,CNS_Q_FPR+0x20,r1) - SAVE_FPR(f5,CNS_Q_FPR+0x28,r1) - SAVE_FPR(f6,CNS_Q_FPR+0x30,r1) - SAVE_FPR(f7,CNS_Q_FPR+0x38,r1) - SAVE_FPR(f8,CNS_Q_FPR+0x40,r1) - SAVE_FPR(f9,CNS_Q_FPR+0x48,r1) - SAVE_FPR(f10,CNS_Q_FPR+0x50,r1) - SAVE_FPR(f11,CNS_Q_FPR+0x58,r1) - SAVE_FPR(f12,CNS_Q_FPR+0x60,r1) - SAVE_FPR(f13,CNS_Q_FPR+0x68,r1) - SAVE_FPR(f14,CNS_Q_FPR+0x70,r1) - SAVE_FPR(f15,CNS_Q_FPR+0x78,r1) - SAVE_FPR(f16,CNS_Q_FPR+0x80,r1) - SAVE_FPR(f17,CNS_Q_FPR+0x88,r1) - SAVE_FPR(f18,CNS_Q_FPR+0x90,r1) - SAVE_FPR(f19,CNS_Q_FPR+0x98,r1) - SAVE_FPR(f20,CNS_Q_FPR+0xA0,r1) - SAVE_FPR(f21,CNS_Q_FPR+0xA8,r1) - SAVE_FPR(f22,CNS_Q_FPR+0xB0,r1) - SAVE_FPR(f23,CNS_Q_FPR+0xB8,r1) - SAVE_FPR(f24,CNS_Q_FPR+0xC0,r1) - SAVE_FPR(f25,CNS_Q_FPR+0xC8,r1) - SAVE_FPR(f26,CNS_Q_FPR+0xD0,r1) - SAVE_FPR(f27,CNS_Q_FPR+0xD8,r1) - SAVE_FPR(f28,CNS_Q_FPR+0xE0,r1) - SAVE_FPR(f29,CNS_Q_FPR+0xE8,r1) - SAVE_FPR(f30,CNS_Q_FPR+0xF0,r1) - SAVE_FPR(f31,CNS_Q_FPR+0xF8,r1) - -//orig //switch impure offset from gpr to ipr--- -//orig unfix_impure_gpr r1 -//orig fix_impure_ipr r1 -//orig store_reg1 fpcsr, f0, r1, fpcsr=1 - - SAVE_FPR(f0,CNS_Q_FPCSR,r1) // fpcsr loaded above into f0 -- can it reach// pb - lda r1, -0x200(r1) // Restore the impure base address - -//orig // and back to gpr --- -//orig unfix_impure_ipr r1 -//orig fix_impure_gpr r1 - -//orig lda r0, cns_mchksize(r31) // get size of mchk area -//orig store_reg1 mchkflag, r0, r1, ipr=1 -//orig mb - - lda r1, CNS_Q_IPR(r1) // Point to base of IPR area again - // save this using the IPR base (it is closer) not the GRP base as they used...pb - lda r0, MACHINE_CHECK_SIZE(r31) // get size of mchk area - SAVE_SHADOW(r0,CNS_Q_MCHK,r1); - mb - -//orig or r31, 1, r0 // get a one -//orig store_reg1 flag, r0, r1, ipr=1 // set dump area flag -//orig mb - - lda r1, -CNS_Q_IPR(r1) // back to the base - lda r1, 0x200(r1) // Point to center of CPU segment - or r31, 1, r0 // get a one - SAVE_GPR(r0,CNS_Q_FLAG,r1) // // set dump area valid flag - mb - -//orig // restore impure area base -//orig unfix_impure_gpr r1 - lda r1, -0x200(r1) // Point to center of CPU segment - - mtpr r31, dtb_ia // clear the dtb //orig - mtpr r31, itb_ia // clear the itb //orig - -//orig pvc_jsr savsta, bsr=1, dest=1 - ret r31, (r3) // and back we go -#endif - - -#if remove_restore_state == 0 - - -// .sbttl "PAL_RESTORE_STATE" -//+ -// -// Pal_restore_state -// -// -// register usage: -// r1 = addr of impure area -// r3 = return_address -// all other regs are scratchable, as they are about to -// be reloaded from ram. -// -// Function: -// All chip state restored, all SRs, FRs, PTs, IPRs -// *** except R1, R3, PT0, PT4, PT5 *** -// -//- - ALIGN_BLOCK -pal_restore_state: - -//need to restore sc_ctl,bc_ctl,bc_config??? if so, need to figure out a safe way to do so. - -//orig // map the console io area virtually -//orig mtpr r31, dtb_ia // clear the dtb -//orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA -//orig sll r0, 32, r0 // shift to PFN field -//orig lda r2, 0xff(r31) // all read enable and write enable bits set -//orig sll r2, 8, r2 // move to PTE location -//orig addq r0, r2, r0 // combine with PFN -//orig -//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit -//orig mtpr r1, dtb_tag // write TB tag -//orig - - mtpr r31, dtbIa // Clear all DTB entries - srl r1, va_s_off, r0 // Clean off byte-within-page offset - sll r0, pte_v_pfn, r0 // Shift to form PFN - lda r0, pte_m_prot(r0) // Set all read/write enable bits - mtpr r0, dtbPte // Load the PTE and set valid - mtpr r1, dtbTag // Write the PTE and tag into the DTB - - -//orig // map the next page too, in case impure area crosses page boundary -//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page -//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA -//orig sll r0, 32, r0 // shift to PFN field -//orig lda r2, 0xff(r31) // all read enable and write enable bits set -//orig sll r2, 8, r2 // move to PTE location -//orig addq r0, r2, r0 // combine with PFN -//orig -//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit -//orig mtpr r4, dtb_tag // write TB tag - no virtual mbox instruction for 3 cycles - - lda r4, (1<<VA_S_OFF)(r1) // Generate address for next page - srl r4, va_s_off, r0 // Clean off byte-within-page offset - sll r0, pte_v_pfn, r0 // Shift to form PFN - lda r0, pte_m_prot(r0) // Set all read/write enable bits - mtpr r0, dtbPte // Load the PTE and set valid - mtpr r4, dtbTag // Write the PTE and tag into the DTB - -//orig // save all floating regs -//orig mfpr r0, icsr // get icsr -//orig// assume ICSR_V_SDE gt <ICSR_V_FPE> // assertion checker -//orig or r31, <<1@<ICSR_V_SDE-ICSR_V_FPE>> ! 1>, r2 // set SDE and FPE -//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot -//orig or r2, r0, r0 // set FEN on -//orig mtpr r0, icsr // write to icsr, enabling FEN and SDE. 3 bubbles to floating instr. - - mfpr r0, icsr // Get current ICSR - bis zero, 1, r2 // Get a '1' - or r2, (1<<(icsr_v_sde-icsr_v_fpe)), r2 - sll r2, icsr_v_fpe, r2 // Shift bits into position - bis r2, r2, r0 // Set ICSR<SDE> and ICSR<FPE> - mtpr r0, icsr // Update the chip - - mfpr r31, pt0 // FPE bubble cycle 1 //orig - mfpr r31, pt0 // FPE bubble cycle 2 //orig - mfpr r31, pt0 // FPE bubble cycle 3 //orig - -//orig fix_impure_ipr r1 -//orig restore_reg1 fpcsr, f0, r1, fpcsr=1 -//orig mt_fpcr f0 -//orig -//orig unfix_impure_ipr r1 -//orig fix_impure_gpr r1 // adjust impure pointer offset for gpr access -//orig -//orig // restore all floating regs -//orig#define t 0 -//orig .repeat 32 -//orig restore_reg \t , fpu=1 -//orig#define t t + 1 -//orig .endr - - lda r1, 200(r1) // Point to base of IPR area again - RESTORE_FPR(f0,CNS_Q_FPCSR,r1) // can it reach?? pb - mt_fpcr f0 // original - - lda r1, 0x200(r1) // point to center of CPU segment - RESTORE_FPR(f0,CNS_Q_FPR+0x00,r1) - RESTORE_FPR(f1,CNS_Q_FPR+0x08,r1) - RESTORE_FPR(f2,CNS_Q_FPR+0x10,r1) - RESTORE_FPR(f3,CNS_Q_FPR+0x18,r1) - RESTORE_FPR(f4,CNS_Q_FPR+0x20,r1) - RESTORE_FPR(f5,CNS_Q_FPR+0x28,r1) - RESTORE_FPR(f6,CNS_Q_FPR+0x30,r1) - RESTORE_FPR(f7,CNS_Q_FPR+0x38,r1) - RESTORE_FPR(f8,CNS_Q_FPR+0x40,r1) - RESTORE_FPR(f9,CNS_Q_FPR+0x48,r1) - RESTORE_FPR(f10,CNS_Q_FPR+0x50,r1) - RESTORE_FPR(f11,CNS_Q_FPR+0x58,r1) - RESTORE_FPR(f12,CNS_Q_FPR+0x60,r1) - RESTORE_FPR(f13,CNS_Q_FPR+0x68,r1) - RESTORE_FPR(f14,CNS_Q_FPR+0x70,r1) - RESTORE_FPR(f15,CNS_Q_FPR+0x78,r1) - RESTORE_FPR(f16,CNS_Q_FPR+0x80,r1) - RESTORE_FPR(f17,CNS_Q_FPR+0x88,r1) - RESTORE_FPR(f18,CNS_Q_FPR+0x90,r1) - RESTORE_FPR(f19,CNS_Q_FPR+0x98,r1) - RESTORE_FPR(f20,CNS_Q_FPR+0xA0,r1) - RESTORE_FPR(f21,CNS_Q_FPR+0xA8,r1) - RESTORE_FPR(f22,CNS_Q_FPR+0xB0,r1) - RESTORE_FPR(f23,CNS_Q_FPR+0xB8,r1) - RESTORE_FPR(f24,CNS_Q_FPR+0xC0,r1) - RESTORE_FPR(f25,CNS_Q_FPR+0xC8,r1) - RESTORE_FPR(f26,CNS_Q_FPR+0xD0,r1) - RESTORE_FPR(f27,CNS_Q_FPR+0xD8,r1) - RESTORE_FPR(f28,CNS_Q_FPR+0xE0,r1) - RESTORE_FPR(f29,CNS_Q_FPR+0xE8,r1) - RESTORE_FPR(f30,CNS_Q_FPR+0xF0,r1) - RESTORE_FPR(f31,CNS_Q_FPR+0xF8,r1) - -//orig // switch impure pointer from gpr to ipr area -- -//orig unfix_impure_gpr r1 -//orig fix_impure_ipr r1 -//orig -//orig // restore all pal regs -//orig#define t 1 -//orig .repeat 23 -//orig restore_reg \t , pal=1 -//orig#define t t + 1 -//orig .endr - - lda r1, -0x200(r1) // Restore base address of impure area. - lda r1, CNS_Q_IPR(r1) // Point to base of IPR area. - RESTORE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle - RESTORE_IPR(pt1,CNS_Q_PT+0x08,r1) - RESTORE_IPR(pt2,CNS_Q_PT+0x10,r1) - RESTORE_IPR(pt3,CNS_Q_PT+0x18,r1) - RESTORE_IPR(pt4,CNS_Q_PT+0x20,r1) - RESTORE_IPR(pt5,CNS_Q_PT+0x28,r1) - RESTORE_IPR(pt6,CNS_Q_PT+0x30,r1) - RESTORE_IPR(pt7,CNS_Q_PT+0x38,r1) - RESTORE_IPR(pt8,CNS_Q_PT+0x40,r1) - RESTORE_IPR(pt9,CNS_Q_PT+0x48,r1) - RESTORE_IPR(pt10,CNS_Q_PT+0x50,r1) - RESTORE_IPR(pt11,CNS_Q_PT+0x58,r1) - RESTORE_IPR(pt12,CNS_Q_PT+0x60,r1) - RESTORE_IPR(pt13,CNS_Q_PT+0x68,r1) - RESTORE_IPR(pt14,CNS_Q_PT+0x70,r1) - RESTORE_IPR(pt15,CNS_Q_PT+0x78,r1) - RESTORE_IPR(pt16,CNS_Q_PT+0x80,r1) - RESTORE_IPR(pt17,CNS_Q_PT+0x88,r1) - RESTORE_IPR(pt18,CNS_Q_PT+0x90,r1) - RESTORE_IPR(pt19,CNS_Q_PT+0x98,r1) - RESTORE_IPR(pt20,CNS_Q_PT+0xA0,r1) - RESTORE_IPR(pt21,CNS_Q_PT+0xA8,r1) - RESTORE_IPR(pt22,CNS_Q_PT+0xB0,r1) - RESTORE_IPR(pt23,CNS_Q_PT+0xB8,r1) - - -//orig restore_reg exc_addr, ipr=1 // restore ipr -//orig restore_reg pal_base, ipr=1 // restore ipr -//orig restore_reg ipl, ipr=1 // restore ipr -//orig restore_reg ps, ipr=1 // restore ipr -//orig mtpr r0, dtb_cm // set current mode in mbox too -//orig restore_reg itb_asn, ipr=1 -//orig srl r0, itb_asn_v_asn, r0 -//orig sll r0, dtb_asn_v_asn, r0 -//orig mtpr r0, dtb_asn // set ASN in Mbox too -//orig restore_reg ivptbr, ipr=1 -//orig mtpr r0, mvptbr // use ivptbr value to restore mvptbr -//orig restore_reg mcsr, ipr=1 -//orig restore_reg aster, ipr=1 -//orig restore_reg astrr, ipr=1 -//orig restore_reg sirr, ipr=1 -//orig restore_reg maf_mode, ipr=1 // no mbox instruction for 3 cycles -//orig mfpr r31, pt0 // (may issue with mt maf_mode) -//orig mfpr r31, pt0 // bubble cycle 1 -//orig mfpr r31, pt0 // bubble cycle 2 -//orig mfpr r31, pt0 // bubble cycle 3 -//orig mfpr r31, pt0 // (may issue with following ld) - - // r0 gets the value of RESTORE_IPR in the macro and this code uses this side effect (gag) - RESTORE_IPR(excAddr,CNS_Q_EXC_ADDR,r1) - RESTORE_IPR(palBase,CNS_Q_PAL_BASE,r1) - RESTORE_IPR(ipl,CNS_Q_IPL,r1) - RESTORE_IPR(ips,CNS_Q_IPS,r1) - mtpr r0, dtbCm // Set Mbox current mode too. - RESTORE_IPR(itbAsn,CNS_Q_ITB_ASN,r1) - srl r0, 4, r0 - sll r0, 57, r0 - mtpr r0, dtbAsn // Set Mbox ASN too - RESTORE_IPR(iVptBr,CNS_Q_IVPTBR,r1) - mtpr r0, mVptBr // Set Mbox VptBr too - RESTORE_IPR(mcsr,CNS_Q_MCSR,r1) - RESTORE_IPR(aster,CNS_Q_ASTER,r1) - RESTORE_IPR(astrr,CNS_Q_ASTRR,r1) - RESTORE_IPR(sirr,CNS_Q_SIRR,r1) - RESTORE_IPR(mafMode,CNS_Q_MAF_MODE,r1) - STALL - STALL - STALL - STALL - STALL - - - // restore all integer shadow regs -//orig#define t 8 -//orig .repeat 7 -//orig restore_reg \t, shadow=1 -//orig#define t t + 1 -//orig .endr -//orig restore_reg 25, shadow=1 -//orig restore_reg dc_mode, ipr=1 // no mbox instructions for 4 cycles - - RESTORE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code - RESTORE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1) - RESTORE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1) - RESTORE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1) - RESTORE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1) - RESTORE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1) - RESTORE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1) - RESTORE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1) - RESTORE_IPR(dcMode,CNS_Q_DC_MODE,r1) - - // - // Get out of shadow mode - // - - mfpr r31, pt0 // pad last load to icsr write (in case of replay, icsr will be written anyway) //orig - mfpr r31, pt0 // "" //orig - mfpr r0, icsr // Get icsr //orig -//orig ldah r2, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location - ldah r2, (1<<(ICSR_V_SDE-16))(r31) // Get a one in SHADOW_ENABLE bit location //orig - bic r0, r2, r2 // ICSR with SDE clear //orig - mtpr r2, icsr // Turn off SDE - no palshadow rd/wr for 3 bubble cycles //orig - - mfpr r31, pt0 // SDE bubble cycle 1 //orig - mfpr r31, pt0 // SDE bubble cycle 2 //orig - mfpr r31, pt0 // SDE bubble cycle 3 //orig - nop //orig - -//orig // switch impure pointer from ipr to gpr area -- -//orig unfix_impure_ipr r1 -//orig fix_impure_gpr r1 -//orig // restore all integer regs -//orig#define t 4 -//orig .repeat 28 -//orig restore_reg \t -//orig#define t t + 1 -//orig .endr - -// Restore GPRs (r0, r2 are restored later, r1 and r3 are trashed) ... - - lda r1, -CNS_Q_IPR(r1) // Restore base address of impure area - lda r1, 0x200(r1) // Point to center of CPU segment - - RESTORE_GPR(r4,CNS_Q_GPR+0x20,r1) - RESTORE_GPR(r5,CNS_Q_GPR+0x28,r1) - RESTORE_GPR(r6,CNS_Q_GPR+0x30,r1) - RESTORE_GPR(r7,CNS_Q_GPR+0x38,r1) - RESTORE_GPR(r8,CNS_Q_GPR+0x40,r1) - RESTORE_GPR(r9,CNS_Q_GPR+0x48,r1) - RESTORE_GPR(r10,CNS_Q_GPR+0x50,r1) - RESTORE_GPR(r11,CNS_Q_GPR+0x58,r1) - RESTORE_GPR(r12,CNS_Q_GPR+0x60,r1) - RESTORE_GPR(r13,CNS_Q_GPR+0x68,r1) - RESTORE_GPR(r14,CNS_Q_GPR+0x70,r1) - RESTORE_GPR(r15,CNS_Q_GPR+0x78,r1) - RESTORE_GPR(r16,CNS_Q_GPR+0x80,r1) - RESTORE_GPR(r17,CNS_Q_GPR+0x88,r1) - RESTORE_GPR(r18,CNS_Q_GPR+0x90,r1) - RESTORE_GPR(r19,CNS_Q_GPR+0x98,r1) - RESTORE_GPR(r20,CNS_Q_GPR+0xA0,r1) - RESTORE_GPR(r21,CNS_Q_GPR+0xA8,r1) - RESTORE_GPR(r22,CNS_Q_GPR+0xB0,r1) - RESTORE_GPR(r23,CNS_Q_GPR+0xB8,r1) - RESTORE_GPR(r24,CNS_Q_GPR+0xC0,r1) - RESTORE_GPR(r25,CNS_Q_GPR+0xC8,r1) - RESTORE_GPR(r26,CNS_Q_GPR+0xD0,r1) - RESTORE_GPR(r27,CNS_Q_GPR+0xD8,r1) - RESTORE_GPR(r28,CNS_Q_GPR+0xE0,r1) - RESTORE_GPR(r29,CNS_Q_GPR+0xE8,r1) - RESTORE_GPR(r30,CNS_Q_GPR+0xF0,r1) - RESTORE_GPR(r31,CNS_Q_GPR+0xF8,r1) - -//orig // switch impure pointer from gpr to ipr area -- -//orig unfix_impure_gpr r1 -//orig fix_impure_ipr r1 -//orig restore_reg icsr, ipr=1 // restore original icsr- 4 bubbles to hw_rei - - lda t0, -0x200(t0) // Restore base address of impure area. - lda t0, CNS_Q_IPR(t0) // Point to base of IPR area again. - RESTORE_IPR(icsr,CNS_Q_ICSR,r1) - -//orig // and back again -- -//orig unfix_impure_ipr r1 -//orig fix_impure_gpr r1 -//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area valid flag -//orig mb - - lda t0, -CNS_Q_IPR(t0) // Back to base of impure area again, - lda t0, 0x200(t0) // and back to center of CPU segment - SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the dump area valid flag - mb - -//orig // and back we go -//orig// restore_reg 3 -//orig restore_reg 2 -//orig// restore_reg 1 -//orig restore_reg 0 -//orig // restore impure area base -//orig unfix_impure_gpr r1 - - RESTORE_GPR(r2,CNS_Q_GPR+0x10,r1) - RESTORE_GPR(r0,CNS_Q_GPR+0x00,r1) - lda r1, -0x200(r1) // Restore impure base address - - mfpr r31, pt0 // stall for ldqp above //orig - - mtpr r31, dtb_ia // clear the tb //orig - mtpr r31, itb_ia // clear the itb //orig - -//orig pvc_jsr rststa, bsr=1, dest=1 - ret r31, (r3) // back we go //orig -#endif - - -//+ -// pal_pal_bug_check -- code has found a bugcheck situation. -// Set things up and join common machine check flow. -// -// Input: -// r14 - exc_addr -// -// On exit: -// pt0 - saved r0 -// pt1 - saved r1 -// pt4 - saved r4 -// pt5 - saved r5 -// pt6 - saved r6 -// pt10 - saved exc_addr -// pt_misc<47:32> - mchk code -// pt_misc<31:16> - scb vector -// r14 - base of Cbox IPRs in IO space -// MCES<mchk> is set -//- - - ALIGN_BLOCK - .globl pal_pal_bug_check_from_int -pal_pal_bug_check_from_int: - DEBUGSTORE(0x79) -//simos DEBUG_EXC_ADDR() - DEBUGSTORE(0x20) -//simos bsr r25, put_hex - lda r25, mchk_c_bugcheck(r31) - addq r25, 1, r25 // set flag indicating we came from interrupt and stack is already pushed - br r31, pal_pal_mchk - nop - -pal_pal_bug_check: - lda r25, mchk_c_bugcheck(r31) - -pal_pal_mchk: - sll r25, 32, r25 // Move mchk code to position - - mtpr r14, pt10 // Stash exc_addr - mtpr r14, exc_addr - - mfpr r12, pt_misc // Get MCES and scratch - zap r12, 0x3c, r12 - - or r12, r25, r12 // Combine mchk code - lda r25, scb_v_procmchk(r31) // Get SCB vector - - sll r25, 16, r25 // Move SCBv to position - or r12, r25, r25 // Combine SCBv - - mtpr r0, pt0 // Stash for scratch - bis r25, mces_m_mchk, r25 // Set MCES<MCHK> bit - - mtpr r25, pt_misc // Save mchk code!scbv!whami!mces - ldah r14, 0xfff0(r31) - - mtpr r1, pt1 // Stash for scratch - zap r14, 0xE0, r14 // Get Cbox IPR base - - mtpr r4, pt4 - mtpr r5, pt5 - - mtpr r6, pt6 - blbs r12, sys_double_machine_check // MCHK halt if double machine check - - br r31, sys_mchk_collect_iprs // Join common machine check flow - -// align_to_call_pal_section // Align to address of first call_pal entry point - 2000 - -// .sbttl "HALT - PALcode for HALT instruction" - -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// GO to console code -// -//- - - .text 1 -// . = 0x2000 - CALL_PAL_PRIV(PAL_HALT_ENTRY) -call_pal_halt: -#if rax_mode == 0 - mfpr r31, pt0 // Pad exc_addr read - mfpr r31, pt0 - - mfpr r12, exc_addr // get PC - subq r12, 4, r12 // Point to the HALT - - mtpr r12, exc_addr - mtpr r0, pt0 - -//orig pvc_jsr updpcb, bsr=1 - bsr r0, pal_update_pcb // update the pcb - lda r0, hlt_c_sw_halt(r31) // set halt code to sw halt - br r31, sys_enter_console // enter the console - -#else // RAX mode - mb - mb - mtpr r9, ev5__dtb_asn // no Dstream virtual ref for next 3 cycles. - mtpr r9, ev5__itb_asn // E1. Update ITB ASN. No hw_rei for 5 cycles. - mtpr r8, exc_addr // no HW_REI for 1 cycle. - blbc r9, not_begin_case - mtpr r31, ev5__dtb_ia // clear DTB. No Dstream virtual ref for 2 cycles. - mtpr r31, ev5__itb_ia // clear ITB. - -not_begin_case: - nop - nop - - nop - nop // pad mt itb_asn ->hw_rei_stall - - hw_rei_stall -#endif - -// .sbttl "CFLUSH- PALcode for CFLUSH instruction" - -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// R16 - contains the PFN of the page to be flushed -// -// Function: -// Flush all Dstream caches of 1 entire page -// The CFLUSH routine is in the system specific module. -// -//- - - CALL_PAL_PRIV(PAL_CFLUSH_ENTRY) -Call_Pal_Cflush: - br r31, sys_cflush - -// .sbttl "DRAINA - PALcode for DRAINA instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// Implicit TRAPB performed by hardware. -// -// Function: -// Stall instruction issue until all prior instructions are guaranteed to -// complete without incurring aborts. For the EV5 implementation, this -// means waiting until all pending DREADS are returned. -// -//- - - CALL_PAL_PRIV(PAL_DRAINA_ENTRY) -Call_Pal_Draina: - ldah r14, 0x100(r31) // Init counter. Value? - nop - -DRAINA_LOOP: - subq r14, 1, r14 // Decrement counter - mfpr r13, ev5__maf_mode // Fetch status bit - - srl r13, maf_mode_v_dread_pending, r13 - ble r14, DRAINA_LOOP_TOO_LONG - - nop - blbs r13, DRAINA_LOOP // Wait until all DREADS clear - - hw_rei - -DRAINA_LOOP_TOO_LONG: - br r31, call_pal_halt - -// .sbttl "CALL_PAL OPCDECs" - - CALL_PAL_PRIV(0x0003) -CallPal_OpcDec03: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0004) -CallPal_OpcDec04: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0005) -CallPal_OpcDec05: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0006) -CallPal_OpcDec06: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0007) -CallPal_OpcDec07: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0008) -CallPal_OpcDec08: - br r31, osfpal_calpal_opcdec - -// .sbttl "CSERVE- PALcode for CSERVE instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// Various functions for private use of console software -// -// option selector in r0 -// arguments in r16.... -// The CSERVE routine is in the system specific module. -// -//- - - CALL_PAL_PRIV(PAL_CSERVE_ENTRY) -Call_Pal_Cserve: - br r31, sys_cserve - -// .sbttl "swppal - PALcode for swppal instruction" - -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// Vectored into via hardware PALcode instruction dispatch. -// R16 contains the new PAL identifier -// R17:R21 contain implementation-specific entry parameters -// -// R0 receives status: -// 0 success (PAL was switched) -// 1 unknown PAL variant -// 2 known PAL variant, but PAL not loaded -// -// -// Function: -// Swap control to another PAL. -//- - - CALL_PAL_PRIV(PAL_SWPPAL_ENTRY) -Call_Pal_Swppal: - cmpule r16, 255, r0 // see if a kibble was passed - cmoveq r16, r16, r0 // if r16=0 then a valid address (ECO 59) - - or r16, r31, r3 // set r3 incase this is a address - blbc r0, swppal_cont // nope, try it as an address - - cmpeq r16, 2, r0 // is it our friend OSF? - blbc r0, swppal_fail // nope, don't know this fellow - - br r2, CALL_PAL_SWPPAL_10_ // tis our buddy OSF - -// .global osfpal_hw_entry_reset -// .weak osfpal_hw_entry_reset -// .long <osfpal_hw_entry_reset-pal_start> -//orig halt // don't know how to get the address here - kludge ok, load pal at 0 - .long 0 // ?? hack upon hack...pb - -CALL_PAL_SWPPAL_10_: ldlp r3, 0(r2) // fetch target addr -// ble r3, swppal_fail ; if OSF not linked in say not loaded. - mfpr r2, pal_base // fetch pal base - - addq r2, r3, r3 // add pal base - lda r2, 0x3FFF(r31) // get pal base checker mask - - and r3, r2, r2 // any funky bits set? - cmpeq r2, 0, r0 // - - blbc r0, swppal_fail // return unknown if bad bit set. - br r31, swppal_cont - -// .sbttl "CALL_PAL OPCDECs" - - CALL_PAL_PRIV(0x000B) -CallPal_OpcDec0B: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x000C) -CallPal_OpcDec0C: - br r31, osfpal_calpal_opcdec - -// .sbttl "wripir- PALcode for wripir instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// r16 = processor number to interrupt -// -// Function: -// IPIR <- R16 -// Handled in system-specific code -// -// Exit: -// interprocessor interrupt is recorded on the target processor -// and is initiated when the proper enabling conditions are present. -//- - - CALL_PAL_PRIV(PAL_WRIPIR_ENTRY) -Call_Pal_Wrpir: - br r31, sys_wripir - -// .sbttl "CALL_PAL OPCDECs" - - CALL_PAL_PRIV(0x000E) -CallPal_OpcDec0E: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x000F) -CallPal_OpcDec0F: - br r31, osfpal_calpal_opcdec - -// .sbttl "rdmces- PALcode for rdmces instruction" - -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// R0 <- ZEXT(MCES) -//- - - CALL_PAL_PRIV(PAL_RDMCES_ENTRY) -Call_Pal_Rdmces: - mfpr r0, pt_mces // Read from PALtemp - and r0, mces_m_all, r0 // Clear other bits - - hw_rei - -// .sbttl "wrmces- PALcode for wrmces instruction" - -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// If {R16<0> EQ 1} then MCES<0> <- 0 (MCHK) -// If {R16<1> EQ 1} then MCES<1> <- 0 (SCE) -// If {R16<2> EQ 1} then MCES<2> <- 0 (PCE) -// MCES<3> <- R16<3> (DPC) -// MCES<4> <- R16<4> (DSC) -// -//- - - CALL_PAL_PRIV(PAL_WRMCES_ENTRY) -Call_Pal_Wrmces: - and r16, ((1<<mces_v_mchk) | (1<<mces_v_sce) | (1<<mces_v_pce)), r13 // Isolate MCHK, SCE, PCE - mfpr r14, pt_mces // Get current value - - ornot r31, r13, r13 // Flip all the bits - and r16, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r17 - - and r14, r13, r1 // Update MCHK, SCE, PCE - bic r1, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r1 // Clear old DPC, DSC - - or r1, r17, r1 // Update DPC and DSC - mtpr r1, pt_mces // Write MCES back - -#if rawhide_system == 0 - nop // Pad to fix PT write->read restriction -#else - blbs r16, RAWHIDE_clear_mchk_lock // Clear logout from lock -#endif - - nop - hw_rei - - - -// .sbttl "CALL_PAL OPCDECs" - - CALL_PAL_PRIV(0x0012) -CallPal_OpcDec12: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0013) -CallPal_OpcDec13: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0014) -CallPal_OpcDec14: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0015) -CallPal_OpcDec15: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0016) -CallPal_OpcDec16: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0017) -CallPal_OpcDec17: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0018) -CallPal_OpcDec18: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0019) -CallPal_OpcDec19: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x001A) -CallPal_OpcDec1A: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x001B) -CallPal_OpcDec1B: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x001C) -CallPal_OpcDec1C: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x001D) -CallPal_OpcDec1D: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x001E) -CallPal_OpcDec1E: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x001F) -CallPal_OpcDec1F: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0020) -CallPal_OpcDec20: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0021) -CallPal_OpcDec21: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0022) -CallPal_OpcDec22: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0023) -CallPal_OpcDec23: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0024) -CallPal_OpcDec24: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0025) -CallPal_OpcDec25: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0026) -CallPal_OpcDec26: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0027) -CallPal_OpcDec27: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0028) -CallPal_OpcDec28: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0029) -CallPal_OpcDec29: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x002A) -CallPal_OpcDec2A: - br r31, osfpal_calpal_opcdec - -// .sbttl "wrfen - PALcode for wrfen instruction" - -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// a0<0> -> ICSR<FPE> -// Store new FEN in PCB -// Final value of t0 (r1), t8..t10 (r22..r24) and a0 (r16) are UNPREDICTABLE -// -// Issue: What about pending FP loads when FEN goes from on->off???? -//- - - CALL_PAL_PRIV(PAL_WRFEN_ENTRY) -Call_Pal_Wrfen: - or r31, 1, r13 // Get a one - mfpr r1, ev5__icsr // Get current FPE - - sll r13, icsr_v_fpe, r13 // shift 1 to icsr<fpe> spot, e0 - and r16, 1, r16 // clean new fen - - sll r16, icsr_v_fpe, r12 // shift new fen to correct bit position - bic r1, r13, r1 // zero icsr<fpe> - - or r1, r12, r1 // Or new FEN into ICSR - mfpr r12, pt_pcbb // Get PCBB - E1 - - mtpr r1, ev5__icsr // write new ICSR. 3 Bubble cycles to HW_REI - stlp r16, osfpcb_q_fen(r12) // Store FEN in PCB. - - mfpr r31, pt0 // Pad ICSR<FPE> write. - mfpr r31, pt0 - - mfpr r31, pt0 -// pvc_violate 225 // cuz PVC can't distinguish which bits changed - hw_rei - - - CALL_PAL_PRIV(0x002C) -CallPal_OpcDec2C: - br r31, osfpal_calpal_opcdec - -// .sbttl "wrvptpr - PALcode for wrvptpr instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// vptptr <- a0 (r16) -//- - - CALL_PAL_PRIV(PAL_WRVPTPTR_ENTRY) -Call_Pal_Wrvptptr: - mtpr r16, ev5__mvptbr // Load Mbox copy - mtpr r16, ev5__ivptbr // Load Ibox copy - nop // Pad IPR write - nop - hw_rei - - CALL_PAL_PRIV(0x002E) -CallPal_OpcDec2E: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x002F) -CallPal_OpcDec2F: - br r31, osfpal_calpal_opcdec - -// .sbttl "swpctx- PALcode for swpctx instruction" - -//+ -// -// Entry: -// hardware dispatch via callPal instruction -// R16 -> new pcb -// -// Function: -// dynamic state moved to old pcb -// new state loaded from new pcb -// pcbb pointer set -// old pcbb returned in R0 -// -// Note: need to add perf monitor stuff -//- - - CALL_PAL_PRIV(PAL_SWPCTX_ENTRY) -Call_Pal_Swpctx: - rpcc r13 // get cyccounter - mfpr r0, pt_pcbb // get pcbb - - ldqp r22, osfpcb_q_fen(r16) // get new fen/pme - ldqp r23, osfpcb_l_cc(r16) // get new asn - - srl r13, 32, r25 // move offset - mfpr r24, pt_usp // get usp - - stqp r30, osfpcb_q_ksp(r0) // store old ksp -// pvc_violate 379 // stqp can't trap except replay. only problem if mf same ipr in same shadow. - mtpr r16, pt_pcbb // set new pcbb - - stqp r24, osfpcb_q_usp(r0) // store usp - addl r13, r25, r25 // merge for new time - - stlp r25, osfpcb_l_cc(r0) // save time - ldah r24, (1<<(icsr_v_fpe-16))(r31) - - and r22, 1, r12 // isolate fen - mfpr r25, icsr // get current icsr - - ev5_pass2 lda r24, (1<<icsr_v_pmp)(r24) - br r31, swpctx_cont - -// .sbttl "wrval - PALcode for wrval instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// sysvalue <- a0 (r16) -//- - - CALL_PAL_PRIV(PAL_WRVAL_ENTRY) -Call_Pal_Wrval: - nop - mtpr r16, pt_sysval // Pad paltemp write - nop - nop - hw_rei - - -// .sbttl "rdval - PALcode for rdval instruction" - -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// v0 (r0) <- sysvalue -//- - - CALL_PAL_PRIV(PAL_RDVAL_ENTRY) -Call_Pal_Rdval: - nop - mfpr r0, pt_sysval - nop - hw_rei - -// .sbttl "tbi - PALcode for tbi instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// TB invalidate -// r16/a0 = TBI type -// r17/a1 = Va for TBISx instructions -//- - - CALL_PAL_PRIV(PAL_TBI_ENTRY) -Call_Pal_Tbi: - addq r16, 2, r16 // change range to 0-2 - br r23, CALL_PAL_tbi_10_ // get our address - -CALL_PAL_tbi_10_: cmpult r16, 6, r22 // see if in range - lda r23, tbi_tbl-CALL_PAL_tbi_10_(r23) // set base to start of table - sll r16, 4, r16 // * 16 - blbc r22, CALL_PAL_tbi_30_ // go rei, if not - - addq r23, r16, r23 // addr of our code -//orig pvc_jsr tbi - jmp r31, (r23) // and go do it - -CALL_PAL_tbi_30_: - hw_rei - nop - -// .sbttl "wrent - PALcode for wrent instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// Update ent* in paltemps -// r16/a0 = Address of entry routine -// r17/a1 = Entry Number 0..5 -// -// r22, r23 trashed -//- - - CALL_PAL_PRIV(PAL_WRENT_ENTRY) -Call_Pal_Wrent: - cmpult r17, 6, r22 // see if in range - br r23, CALL_PAL_wrent_10_ // get our address - -CALL_PAL_wrent_10_: bic r16, 3, r16 // clean pc - blbc r22, CALL_PAL_wrent_30_ // go rei, if not in range - - lda r23, wrent_tbl-CALL_PAL_wrent_10_(r23) // set base to start of table - sll r17, 4, r17 // *16 - - addq r17, r23, r23 // Get address in table -//orig pvc_jsr wrent - jmp r31, (r23) // and go do it - -CALL_PAL_wrent_30_: - hw_rei // out of range, just return - -// .sbttl "swpipl - PALcode for swpipl instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// v0 (r0) <- PS<IPL> -// PS<IPL> <- a0<2:0> (r16) -// -// t8 (r22) is scratch -//- - - CALL_PAL_PRIV(PAL_SWPIPL_ENTRY) -Call_Pal_Swpipl: - and r16, osfps_m_ipl, r16 // clean New ipl - mfpr r22, pt_intmask // get int mask - - extbl r22, r16, r22 // get mask for this ipl - bis r11, r31, r0 // return old ipl - - bis r16, r31, r11 // set new ps - mtpr r22, ev5__ipl // set new mask - - mfpr r31, pt0 // pad ipl write - mfpr r31, pt0 // pad ipl write - - hw_rei // back - -// .sbttl "rdps - PALcode for rdps instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// v0 (r0) <- ps -//- - - CALL_PAL_PRIV(PAL_RDPS_ENTRY) -Call_Pal_Rdps: - bis r11, r31, r0 // Fetch PALshadow PS - nop // Must be 2 cycles long - hw_rei - -// .sbttl "wrkgp - PALcode for wrkgp instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// kgp <- a0 (r16) -//- - - CALL_PAL_PRIV(PAL_WRKGP_ENTRY) -Call_Pal_Wrkgp: - nop - mtpr r16, pt_kgp - nop // Pad for pt write->read restriction - nop - hw_rei - -// .sbttl "wrusp - PALcode for wrusp instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// usp <- a0 (r16) -//- - - CALL_PAL_PRIV(PAL_WRUSP_ENTRY) -Call_Pal_Wrusp: - nop - mtpr r16, pt_usp - nop // Pad possible pt write->read restriction - nop - hw_rei - -// .sbttl "wrperfmon - PALcode for wrperfmon instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// -// Function: -// Various control functions for the onchip performance counters -// -// option selector in r16 -// option argument in r17 -// returned status in r0 -// -// -// r16 = 0 Disable performance monitoring for one or more cpu's -// r17 = 0 disable no counters -// r17 = bitmask disable counters specified in bit mask (1=disable) -// -// r16 = 1 Enable performance monitoring for one or more cpu's -// r17 = 0 enable no counters -// r17 = bitmask enable counters specified in bit mask (1=enable) -// -// r16 = 2 Mux select for one or more cpu's -// r17 = Mux selection (cpu specific) -// <24:19> bc_ctl<pm_mux_sel> field (see spec) -// <31>,<7:4>,<3:0> pmctr <sel0>,<sel1>,<sel2> fields (see spec) -// -// r16 = 3 Options -// r17 = (cpu specific) -// <0> = 0 log all processes -// <0> = 1 log only selected processes -// <30,9,8> mode select - ku,kp,kk -// -// r16 = 4 Interrupt frequency select -// r17 = (cpu specific) indicates interrupt frequencies desired for each -// counter, with "zero interrupts" being an option -// frequency info in r17 bits as defined by PMCTR_CTL<FRQx> below -// -// r16 = 5 Read Counters -// r17 = na -// r0 = value (same format as ev5 pmctr) -// <0> = 0 Read failed -// <0> = 1 Read succeeded -// -// r16 = 6 Write Counters -// r17 = value (same format as ev5 pmctr; all counters written simultaneously) -// -// r16 = 7 Enable performance monitoring for one or more cpu's and reset counter to 0 -// r17 = 0 enable no counters -// r17 = bitmask enable & clear counters specified in bit mask (1=enable & clear) -// -//============================================================================= -//Assumptions: -//PMCTR_CTL: -// -// <15:14> CTL0 -- encoded frequency select and enable - CTR0 -// <13:12> CTL1 -- " - CTR1 -// <11:10> CTL2 -- " - CTR2 -// -// <9:8> FRQ0 -- frequency select for CTR0 (no enable info) -// <7:6> FRQ1 -- frequency select for CTR1 -// <5:4> FRQ2 -- frequency select for CTR2 -// -// <0> all vs. select processes (0=all,1=select) -// -// where -// FRQx<1:0> -// 0 1 disable interrupt -// 1 0 frequency = 65536 (16384 for ctr2) -// 1 1 frequency = 256 -// note: FRQx<1:0> = 00 will keep counters from ever being enabled. -// -//============================================================================= -// - CALL_PAL_PRIV(0x0039) -// unsupported in Hudson code .. pboyle Nov/95 -CALL_PAL_Wrperfmon: -#if perfmon_debug == 0 - // "real" performance monitoring code - cmpeq r16, 1, r0 // check for enable - bne r0, perfmon_en // br if requested to enable - - cmpeq r16, 2, r0 // check for mux ctl - bne r0, perfmon_muxctl // br if request to set mux controls - - cmpeq r16, 3, r0 // check for options - bne r0, perfmon_ctl // br if request to set options - - cmpeq r16, 4, r0 // check for interrupt frequency select - bne r0, perfmon_freq // br if request to change frequency select - - cmpeq r16, 5, r0 // check for counter read request - bne r0, perfmon_rd // br if request to read counters - - cmpeq r16, 6, r0 // check for counter write request - bne r0, perfmon_wr // br if request to write counters - - cmpeq r16, 7, r0 // check for counter clear/enable request - bne r0, perfmon_enclr // br if request to clear/enable counters - - beq r16, perfmon_dis // br if requested to disable (r16=0) - br r31, perfmon_unknown // br if unknown request -#else - - br r31, pal_perfmon_debug -#endif - -// .sbttl "rdusp - PALcode for rdusp instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// v0 (r0) <- usp -//- - - CALL_PAL_PRIV(PAL_RDUSP_ENTRY) -Call_Pal_Rdusp: - nop - mfpr r0, pt_usp - hw_rei - - - CALL_PAL_PRIV(0x003B) -CallPal_OpcDec3B: - br r31, osfpal_calpal_opcdec - -// .sbttl "whami - PALcode for whami instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// v0 (r0) <- whami -//- - CALL_PAL_PRIV(PAL_WHAMI_ENTRY) -Call_Pal_Whami: - nop - mfpr r0, pt_whami // Get Whami - extbl r0, 1, r0 // Isolate just whami bits - hw_rei - -// .sbttl "retsys - PALcode for retsys instruction" -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// 00(sp) contains return pc -// 08(sp) contains r29 -// -// Function: -// Return from system call. -// mode switched from kern to user. -// stacks swapped, ugp, upc restored. -// r23, r25 junked -//- - - CALL_PAL_PRIV(PAL_RETSYS_ENTRY) -Call_Pal_Retsys: - lda r25, osfsf_c_size(sp) // pop stack - bis r25, r31, r14 // touch r25 & r14 to stall mf exc_addr - - mfpr r14, exc_addr // save exc_addr in case of fault - ldq r23, osfsf_pc(sp) // get pc - - ldq r29, osfsf_gp(sp) // get gp - stl_c r31, -4(sp) // clear lock_flag - - lda r11, 1<<osfps_v_mode(r31)// new PS:mode=user - mfpr r30, pt_usp // get users stack - - bic r23, 3, r23 // clean return pc - mtpr r31, ev5__ipl // zero ibox IPL - 2 bubbles to hw_rei - - mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles - mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei - - mtpr r23, exc_addr // set return address - 1 bubble to hw_rei - mtpr r25, pt_ksp // save kern stack - - rc r31 // clear inter_flag -// pvc_violate 248 // possible hidden mt->mf pt violation ok in callpal - hw_rei_spe // and back - - - CALL_PAL_PRIV(0x003E) -CallPal_OpcDec3E: - br r31, osfpal_calpal_opcdec - -// .sbttl "rti - PALcode for rti instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// 00(sp) -> ps -// 08(sp) -> pc -// 16(sp) -> r29 (gp) -// 24(sp) -> r16 (a0) -// 32(sp) -> r17 (a1) -// 40(sp) -> r18 (a3) -//- - - CALL_PAL_PRIV(PAL_RTI_ENTRY) -#ifdef SIMOS - /* called once by platform_tlaser */ - .globl Call_Pal_Rti -#endif -Call_Pal_Rti: - lda r25, osfsf_c_size(sp) // get updated sp - bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr - - mfpr r14, exc_addr // save PC in case of fault - rc r31 // clear intr_flag - - ldq r12, -6*8(r25) // get ps - ldq r13, -5*8(r25) // pc - - ldq r18, -1*8(r25) // a2 - ldq r17, -2*8(r25) // a1 - - ldq r16, -3*8(r25) // a0 - ldq r29, -4*8(r25) // gp - - bic r13, 3, r13 // clean return pc - stl_c r31, -4(r25) // clear lock_flag - - and r12, osfps_m_mode, r11 // get mode - mtpr r13, exc_addr // set return address - - beq r11, rti_to_kern // br if rti to Kern - br r31, rti_to_user // out of call_pal space - - -// .sbttl "Start the Unprivileged CALL_PAL Entry Points" -// .sbttl "bpt- PALcode for bpt instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// Build stack frame -// a0 <- code -// a1 <- unpred -// a2 <- unpred -// vector via entIF -// -//- -// - .text 1 -// . = 0x3000 - CALL_PAL_UNPRIV(PAL_BPT_ENTRY) -Call_Pal_Bpt: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - bis r11, r31, r12 // Save PS for stack write - bge r25, CALL_PAL_bpt_10_ // no stack swap needed if cm=kern - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r11 // Set new PS - mfpr r30, pt_ksp - -CALL_PAL_bpt_10_: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - mfpr r14, exc_addr // get pc - - stq r16, osfsf_a0(sp) // save regs - bis r31, osf_a0_bpt, r16 // set a0 - - stq r17, osfsf_a1(sp) // a1 - br r31, bpt_bchk_common // out of call_pal space - - -// .sbttl "bugchk- PALcode for bugchk instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// Build stack frame -// a0 <- code -// a1 <- unpred -// a2 <- unpred -// vector via entIF -// -//- -// - CALL_PAL_UNPRIV(PAL_BUGCHK_ENTRY) -Call_Pal_Bugchk: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - bis r11, r31, r12 // Save PS for stack write - bge r25, CALL_PAL_bugchk_10_ // no stack swap needed if cm=kern - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r11 // Set new PS - mfpr r30, pt_ksp - -CALL_PAL_bugchk_10_: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - mfpr r14, exc_addr // get pc - - stq r16, osfsf_a0(sp) // save regs - bis r31, osf_a0_bugchk, r16 // set a0 - - stq r17, osfsf_a1(sp) // a1 - br r31, bpt_bchk_common // out of call_pal space - - - CALL_PAL_UNPRIV(0x0082) -CallPal_OpcDec82: - br r31, osfpal_calpal_opcdec - -// .sbttl "callsys - PALcode for callsys instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// Switch mode to kernel and build a callsys stack frame. -// sp = ksp -// gp = kgp -// t8 - t10 (r22-r24) trashed -// -//- -// - CALL_PAL_UNPRIV(PAL_CALLSYS_ENTRY) -Call_Pal_Callsys: - - and r11, osfps_m_mode, r24 // get mode - mfpr r22, pt_ksp // get ksp - - beq r24, sys_from_kern // sysCall from kern is not allowed - mfpr r12, pt_entsys // get address of callSys routine - -//+ -// from here on we know we are in user going to Kern -//- - mtpr r31, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles - mtpr r31, ev5__ps // set Ibox current mode - 2 bubble to hw_rei - - bis r31, r31, r11 // PS=0 (mode=kern) - mfpr r23, exc_addr // get pc - - mtpr r30, pt_usp // save usp - lda sp, 0-osfsf_c_size(r22)// set new sp - - stq r29, osfsf_gp(sp) // save user gp/r29 - stq r24, osfsf_ps(sp) // save ps - - stq r23, osfsf_pc(sp) // save pc - mtpr r12, exc_addr // set address - // 1 cycle to hw_rei - - mfpr r29, pt_kgp // get the kern gp/r29 - - hw_rei_spe // and off we go! - - - CALL_PAL_UNPRIV(0x0084) -CallPal_OpcDec84: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0085) -CallPal_OpcDec85: - br r31, osfpal_calpal_opcdec - -// .sbttl "imb - PALcode for imb instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// Flush the writebuffer and flush the Icache -// -//- -// - CALL_PAL_UNPRIV(PAL_IMB_ENTRY) -Call_Pal_Imb: - mb // Clear the writebuffer - mfpr r31, ev5__mcsr // Sync with clear - nop - nop - br r31, pal_ic_flush // Flush Icache - - -// .sbttl "CALL_PAL OPCDECs" - - CALL_PAL_UNPRIV(0x0087) -CallPal_OpcDec87: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0088) -CallPal_OpcDec88: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0089) -CallPal_OpcDec89: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x008A) -CallPal_OpcDec8A: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x008B) -CallPal_OpcDec8B: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x008C) -CallPal_OpcDec8C: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x008D) -CallPal_OpcDec8D: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x008E) -CallPal_OpcDec8E: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x008F) -CallPal_OpcDec8F: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0090) -CallPal_OpcDec90: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0091) -CallPal_OpcDec91: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0092) -CallPal_OpcDec92: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0093) -CallPal_OpcDec93: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0094) -CallPal_OpcDec94: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0095) -CallPal_OpcDec95: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0096) -CallPal_OpcDec96: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0097) -CallPal_OpcDec97: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0098) -CallPal_OpcDec98: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0099) -CallPal_OpcDec99: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x009A) -CallPal_OpcDec9A: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x009B) -CallPal_OpcDec9B: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x009C) -CallPal_OpcDec9C: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x009D) -CallPal_OpcDec9D: - br r31, osfpal_calpal_opcdec - -// .sbttl "rdunique - PALcode for rdunique instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// v0 (r0) <- unique -// -//- -// - CALL_PAL_UNPRIV(PAL_RDUNIQUE_ENTRY) -CALL_PALrdunique_: - mfpr r0, pt_pcbb // get pcb pointer - ldqp r0, osfpcb_q_unique(r0) // get new value - - hw_rei - -// .sbttl "wrunique - PALcode for wrunique instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// unique <- a0 (r16) -// -//- -// -CALL_PAL_UNPRIV(PAL_WRUNIQUE_ENTRY) -CALL_PAL_Wrunique: - nop - mfpr r12, pt_pcbb // get pcb pointer - stqp r16, osfpcb_q_unique(r12)// get new value - nop // Pad palshadow write - hw_rei // back - -// .sbttl "CALL_PAL OPCDECs" - - CALL_PAL_UNPRIV(0x00A0) -CallPal_OpcDecA0: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A1) -CallPal_OpcDecA1: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A2) -CallPal_OpcDecA2: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A3) -CallPal_OpcDecA3: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A4) -CallPal_OpcDecA4: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A5) -CallPal_OpcDecA5: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A6) -CallPal_OpcDecA6: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A7) -CallPal_OpcDecA7: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A8) -CallPal_OpcDecA8: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A9) -CallPal_OpcDecA9: - br r31, osfpal_calpal_opcdec - - -// .sbttl "gentrap - PALcode for gentrap instruction" -//+ -// CALL_PAL_gentrap: -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// Build stack frame -// a0 <- code -// a1 <- unpred -// a2 <- unpred -// vector via entIF -// -//- - - CALL_PAL_UNPRIV(0x00AA) -// unsupported in Hudson code .. pboyle Nov/95 -CALL_PAL_gentrap: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - bis r11, r31, r12 // Save PS for stack write - bge r25, CALL_PAL_gentrap_10_ // no stack swap needed if cm=kern - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r11 // Set new PS - mfpr r30, pt_ksp - -CALL_PAL_gentrap_10_: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - mfpr r14, exc_addr // get pc - - stq r16, osfsf_a0(sp) // save regs - bis r31, osf_a0_gentrap, r16// set a0 - - stq r17, osfsf_a1(sp) // a1 - br r31, bpt_bchk_common // out of call_pal space - - -// .sbttl "CALL_PAL OPCDECs" - - CALL_PAL_UNPRIV(0x00AB) -CallPal_OpcDecAB: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00AC) -CallPal_OpcDecAC: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00AD) -CallPal_OpcDecAD: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00AE) -CallPal_OpcDecAE: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00AF) -CallPal_OpcDecAF: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B0) -CallPal_OpcDecB0: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B1) -CallPal_OpcDecB1: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B2) -CallPal_OpcDecB2: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B3) -CallPal_OpcDecB3: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B4) -CallPal_OpcDecB4: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B5) -CallPal_OpcDecB5: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B6) -CallPal_OpcDecB6: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B7) -CallPal_OpcDecB7: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B8) -CallPal_OpcDecB8: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B9) -CallPal_OpcDecB9: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00BA) -CallPal_OpcDecBA: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00BB) -CallPal_OpcDecBB: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00BC) -CallPal_OpcDecBC: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00BD) -CallPal_OpcDecBD: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00BE) -CallPal_OpcDecBE: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00BF) -CallPal_OpcDecBF: - // MODIFIED BY EGH 2/25/04 - br r31, copypal_impl - - -/*======================================================================*/ -/* OSF/1 CALL_PAL CONTINUATION AREA */ -/*======================================================================*/ - - .text 2 - - . = 0x4000 - - -// .sbttl "Continuation of MTPR_PERFMON" - ALIGN_BLOCK -#if perfmon_debug == 0 - // "real" performance monitoring code -// mux ctl -perfmon_muxctl: - lda r8, 1(r31) // get a 1 - sll r8, pmctr_v_sel0, r8 // move to sel0 position - or r8, ((0xf<<pmctr_v_sel1) | (0xf<<pmctr_v_sel2)), r8 // build mux select mask - and r17, r8, r25 // isolate pmctr mux select bits - mfpr r0, ev5__pmctr - bic r0, r8, r0 // clear old mux select bits - or r0,r25, r25 // or in new mux select bits - mtpr r25, ev5__pmctr - - // ok, now tackle cbox mux selects - ldah r14, 0xfff0(r31) - zap r14, 0xE0, r14 // Get Cbox IPR base -//orig get_bc_ctl_shadow r16 // bc_ctl returned in lower longword -// adapted from ev5_pal_macros.mar - mfpr r16, pt_impure - lda r16, CNS_Q_IPR(r16) - RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16); - - lda r8, 0x3F(r31) // build mux select mask - sll r8, bc_ctl_v_pm_mux_sel, r8 - - and r17, r8, r25 // isolate bc_ctl mux select bits - bic r16, r8, r16 // isolate old mux select bits - or r16, r25, r25 // create new bc_ctl - mb // clear out cbox for future ipr write - stqp r25, ev5__bc_ctl(r14) // store to cbox ipr - mb // clear out cbox for future ipr write - -//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr -// adapted from ev5_pal_macros.mar - mfpr r16, pt_impure - lda r16, CNS_Q_IPR(r16) - SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16); - - br r31, perfmon_success - - -// requested to disable perf monitoring -perfmon_dis: - mfpr r14, ev5__pmctr // read ibox pmctr ipr -perfmon_dis_ctr0: // and begin with ctr0 - blbc r17, perfmon_dis_ctr1 // do not disable ctr0 - lda r8, 3(r31) - sll r8, pmctr_v_ctl0, r8 - bic r14, r8, r14 // disable ctr0 -perfmon_dis_ctr1: - srl r17, 1, r17 - blbc r17, perfmon_dis_ctr2 // do not disable ctr1 - lda r8, 3(r31) - sll r8, pmctr_v_ctl1, r8 - bic r14, r8, r14 // disable ctr1 -perfmon_dis_ctr2: - srl r17, 1, r17 - blbc r17, perfmon_dis_update // do not disable ctr2 - lda r8, 3(r31) - sll r8, pmctr_v_ctl2, r8 - bic r14, r8, r14 // disable ctr2 -perfmon_dis_update: - mtpr r14, ev5__pmctr // update pmctr ipr -//;the following code is not needed for ev5 pass2 and later, but doesn't hurt anything to leave in -// adapted from ev5_pal_macros.mar -//orig get_pmctr_ctl r8, r25 // pmctr_ctl bit in r8. adjusted impure pointer in r25 - mfpr r25, pt_impure - lda r25, CNS_Q_IPR(r25) - RESTORE_SHADOW(r8,CNS_Q_PM_CTL,r25); - - lda r17, 0x3F(r31) // build mask - sll r17, pmctr_v_ctl2, r17 // shift mask to correct position - and r14, r17, r14 // isolate ctl bits - bic r8, r17, r8 // clear out old ctl bits - or r14, r8, r14 // create shadow ctl bits -//orig store_reg1 pmctr_ctl, r14, r25, ipr=1 // update pmctr_ctl register -//adjusted impure pointer still in r25 - SAVE_SHADOW(r14,CNS_Q_PM_CTL,r25); - - br r31, perfmon_success - - -// requested to enable perf monitoring -//;the following code can be greatly simplified for pass2, but should work fine as is. - - -perfmon_enclr: - lda r9, 1(r31) // set enclr flag - br perfmon_en_cont - -perfmon_en: - bis r31, r31, r9 // clear enclr flag - -perfmon_en_cont: - mfpr r8, pt_pcbb // get PCB base -//orig get_pmctr_ctl r25, r25 - mfpr r25, pt_impure - lda r25, CNS_Q_IPR(r25) - RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r25); - - ldqp r16, osfpcb_q_fen(r8) // read DAT/PME/FEN quadword - mfpr r14, ev5__pmctr // read ibox pmctr ipr - srl r16, osfpcb_v_pme, r16 // get pme bit - mfpr r13, icsr - and r16, 1, r16 // isolate pme bit - - // this code only needed in pass2 and later -//orig sget_addr r12, 1<<icsr_v_pmp, r31 - lda r12, 1<<icsr_v_pmp(r31) // pb - bic r13, r12, r13 // clear pmp bit - sll r16, icsr_v_pmp, r12 // move pme bit to icsr<pmp> position - or r12, r13, r13 // new icsr with icsr<pmp> bit set/clear - ev5_pass2 mtpr r13, icsr // update icsr - -#if ev5_p1 != 0 - lda r12, 1(r31) - cmovlbc r25, r12, r16 // r16<0> set if either pme=1 or sprocess=0 (sprocess in bit 0 of r25) -#else - bis r31, 1, r16 // set r16<0> on pass2 to update pmctr always (icsr provides real enable) -#endif - - sll r25, 6, r25 // shift frequency bits into pmctr_v_ctl positions - bis r14, r31, r13 // copy pmctr - -perfmon_en_ctr0: // and begin with ctr0 - blbc r17, perfmon_en_ctr1 // do not enable ctr0 - - blbc r9, perfmon_en_noclr0 // enclr flag set, clear ctr0 field - lda r8, 0xffff(r31) - zapnot r8, 3, r8 // ctr0<15:0> mask - sll r8, pmctr_v_ctr0, r8 - bic r14, r8, r14 // clear ctr bits - bic r13, r8, r13 // clear ctr bits - -perfmon_en_noclr0: -//orig get_addr r8, 3<<pmctr_v_ctl0, r31 - LDLI(r8, (3<<pmctr_v_ctl0)) - and r25, r8, r12 //isolate frequency select bits for ctr0 - bic r14, r8, r14 // clear ctl0 bits in preparation for enabling - or r14,r12,r14 // or in new ctl0 bits - -perfmon_en_ctr1: // enable ctr1 - srl r17, 1, r17 // get ctr1 enable - blbc r17, perfmon_en_ctr2 // do not enable ctr1 - - blbc r9, perfmon_en_noclr1 // if enclr flag set, clear ctr1 field - lda r8, 0xffff(r31) - zapnot r8, 3, r8 // ctr1<15:0> mask - sll r8, pmctr_v_ctr1, r8 - bic r14, r8, r14 // clear ctr bits - bic r13, r8, r13 // clear ctr bits - -perfmon_en_noclr1: -//orig get_addr r8, 3<<pmctr_v_ctl1, r31 - LDLI(r8, (3<<pmctr_v_ctl1)) - and r25, r8, r12 //isolate frequency select bits for ctr1 - bic r14, r8, r14 // clear ctl1 bits in preparation for enabling - or r14,r12,r14 // or in new ctl1 bits - -perfmon_en_ctr2: // enable ctr2 - srl r17, 1, r17 // get ctr2 enable - blbc r17, perfmon_en_return // do not enable ctr2 - return - - blbc r9, perfmon_en_noclr2 // if enclr flag set, clear ctr2 field - lda r8, 0x3FFF(r31) // ctr2<13:0> mask - sll r8, pmctr_v_ctr2, r8 - bic r14, r8, r14 // clear ctr bits - bic r13, r8, r13 // clear ctr bits - -perfmon_en_noclr2: -//orig get_addr r8, 3<<pmctr_v_ctl2, r31 - LDLI(r8, (3<<pmctr_v_ctl2)) - and r25, r8, r12 //isolate frequency select bits for ctr2 - bic r14, r8, r14 // clear ctl2 bits in preparation for enabling - or r14,r12,r14 // or in new ctl2 bits - -perfmon_en_return: - cmovlbs r16, r14, r13 // if pme enabled, move enables into pmctr - // else only do the counter clears - mtpr r13, ev5__pmctr // update pmctr ipr - -//;this code not needed for pass2 and later, but does not hurt to leave it in - lda r8, 0x3F(r31) -//orig get_pmctr_ctl r25, r12 // read pmctr ctl; r12=adjusted impure pointer - mfpr r12, pt_impure - lda r12, CNS_Q_IPR(r12) - RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r12); - - sll r8, pmctr_v_ctl2, r8 // build ctl mask - and r8, r14, r14 // isolate new ctl bits - bic r25, r8, r25 // clear out old ctl value - or r25, r14, r14 // create new pmctr_ctl -//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 - SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr - - br r31, perfmon_success - - -// options... -perfmon_ctl: - -// set mode -//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer - mfpr r12, pt_impure - lda r12, CNS_Q_IPR(r12) - RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12); - -//orig get_addr r8, (1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk), r31 // build mode mask for pmctr register - LDLI(r8, ((1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk))) - mfpr r0, ev5__pmctr - and r17, r8, r25 // isolate pmctr mode bits - bic r0, r8, r0 // clear old mode bits - or r0, r25, r25 // or in new mode bits - mtpr r25, ev5__pmctr - -//;the following code will only be used in pass2, but should not hurt anything if run in pass1. - mfpr r8, icsr - lda r25, 1<<icsr_v_pma(r31) // set icsr<pma> if r17<0>=0 - bic r8, r25, r8 // clear old pma bit - cmovlbs r17, r31, r25 // and clear icsr<pma> if r17<0>=1 - or r8, r25, r8 - ev5_pass2 mtpr r8, icsr // 4 bubbles to hw_rei - mfpr r31, pt0 // pad icsr write - mfpr r31, pt0 // pad icsr write - -//;the following code not needed for pass2 and later, but should work anyway. - bis r14, 1, r14 // set for select processes - blbs r17, perfmon_sp // branch if select processes - bic r14, 1, r14 // all processes -perfmon_sp: -//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register - SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr - br r31, perfmon_success - -// counter frequency select -perfmon_freq: -//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer - mfpr r12, pt_impure - lda r12, CNS_Q_IPR(r12) - RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12); - - lda r8, 0x3F(r31) -//orig sll r8, pmctr_ctl_v_frq2, r8 // build mask for frequency select field -// I guess this should be a shift of 4 bits from the above control register structure .. pb -#define pmctr_ctl_v_frq2_SHIFT 4 - sll r8, pmctr_ctl_v_frq2_SHIFT, r8 // build mask for frequency select field - - and r8, r17, r17 - bic r14, r8, r14 // clear out old frequency select bits - - or r17, r14, r14 // or in new frequency select info -//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register - SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr - - br r31, perfmon_success - -// read counters -perfmon_rd: - mfpr r0, ev5__pmctr - or r0, 1, r0 // or in return status - hw_rei // back to user - -// write counters -perfmon_wr: - mfpr r14, ev5__pmctr - lda r8, 0x3FFF(r31) // ctr2<13:0> mask - sll r8, pmctr_v_ctr2, r8 - -//orig get_addr r9, 0xFFFFFFFF, r31, verify=0 // ctr2<15:0>,ctr1<15:0> mask - LDLI(r9, (0xFFFFFFFF)) - sll r9, pmctr_v_ctr1, r9 - or r8, r9, r8 // or ctr2, ctr1, ctr0 mask - bic r14, r8, r14 // clear ctr fields - and r17, r8, r25 // clear all but ctr fields - or r25, r14, r14 // write ctr fields - mtpr r14, ev5__pmctr // update pmctr ipr - - mfpr r31, pt0 // pad pmctr write (needed only to keep PVC happy) - -perfmon_success: - or r31, 1, r0 // set success - hw_rei // back to user - -perfmon_unknown: - or r31, r31, r0 // set fail - hw_rei // back to user - -#else - -// end of "real code", start of debug code - -//+ -// Debug environment: -// (in pass2, always set icsr<pma> to ensure master counter enable is on) -// R16 = 0 Write to on-chip performance monitor ipr -// r17 = on-chip ipr -// r0 = return value of read of on-chip performance monitor ipr -// R16 = 1 Setup Cbox mux selects -// r17 = Cbox mux selects in same position as in bc_ctl ipr. -// r0 = return value of read of on-chip performance monitor ipr -// -//- -pal_perfmon_debug: - mfpr r8, icsr - lda r9, 1<<icsr_v_pma(r31) - bis r8, r9, r8 - mtpr r8, icsr - - mfpr r0, ev5__pmctr // read old value - bne r16, cbox_mux_sel - - mtpr r17, ev5__pmctr // update pmctr ipr - br r31, end_pm - -cbox_mux_sel: - // ok, now tackle cbox mux selects - ldah r14, 0xfff0(r31) - zap r14, 0xE0, r14 // Get Cbox IPR base -//orig get_bc_ctl_shadow r16 // bc_ctl returned - mfpr r16, pt_impure - lda r16, CNS_Q_IPR(r16) - RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16); - - lda r8, 0x3F(r31) // build mux select mask - sll r8, BC_CTL_V_PM_MUX_SEL, r8 - - and r17, r8, r25 // isolate bc_ctl mux select bits - bic r16, r8, r16 // isolate old mux select bits - or r16, r25, r25 // create new bc_ctl - mb // clear out cbox for future ipr write - stqp r25, ev5__bc_ctl(r14) // store to cbox ipr - mb // clear out cbox for future ipr write -//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr - mfpr r16, pt_impure - lda r16, CNS_Q_IPR(r16) - SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16); - -end_pm: hw_rei - -#endif - - -//;The following code is a workaround for a cpu bug where Istream prefetches to -//;super-page address space in user mode may escape off-chip. -#if spe_fix != 0 - - ALIGN_BLOCK -hw_rei_update_spe: - mfpr r12, pt_misc // get previous mode - srl r11, osfps_v_mode, r10 // isolate current mode bit - and r10, 1, r10 - extbl r12, 7, r8 // get previous mode field - and r8, 1, r8 // isolate previous mode bit - cmpeq r10, r8, r8 // compare previous and current modes - beq r8, hw_rei_update_spe_5_ - hw_rei // if same, just return - -hw_rei_update_spe_5_: - -#if fill_err_hack != 0 - - fill_error_hack -#endif - - mfpr r8, icsr // get current icsr value - ldah r9, (2<<(icsr_v_spe-16))(r31) // get spe bit mask - bic r8, r9, r8 // disable spe - xor r10, 1, r9 // flip mode for new spe bit - sll r9, icsr_v_spe+1, r9 // shift into position - bis r8, r9, r8 // enable/disable spe - lda r9, 1(r31) // now update our flag - sll r9, pt_misc_v_cm, r9 // previous mode saved bit mask - bic r12, r9, r12 // clear saved previous mode - sll r10, pt_misc_v_cm, r9 // current mode saved bit mask - bis r12, r9, r12 // set saved current mode - mtpr r12, pt_misc // update pt_misc - mtpr r8, icsr // update icsr - -#if osf_chm_fix != 0 - - - blbc r10, hw_rei_update_spe_10_ // branch if not user mode - - mb // ensure no outstanding fills - lda r12, 1<<dc_mode_v_dc_ena(r31) // User mode - mtpr r12, dc_mode // Turn on dcache - mtpr r31, dc_flush // and flush it - br r31, pal_ic_flush - -hw_rei_update_spe_10_: mfpr r9, pt_pcbb // Kernel mode - ldqp r9, osfpcb_q_Fen(r9) // get FEN - blbc r9, pal_ic_flush // return if FP disabled - mb // ensure no outstanding fills - mtpr r31, dc_mode // turn off dcache -#endif - - - br r31, pal_ic_flush // Pal restriction - must flush Icache if changing ICSR<SPE> -#endif - - -copypal_impl: - mov r16, r0 - and r16, 63, r8 - and r17, 63, r9 - bis r8, r9, r8 - bne r8, cache_copy_done - bic r18, 63, r8 - and r18, 63, r18 - beq r8, cache_copy_done - cache_loop: - ldf f17, 0(r16) - stf f17, 0(r16) - addq r17, 64, r17 - addq r16, 64, r16 - subq r8, 64, r8 - bne r8, cache_loop -cache_copy_done: - ble r18, finished #if len <=0 we are finished - ldq_u r8, 0(r17) - xor r17, r16, r9 - and r9, 7, r9 - and r16, 7, r10 - bne r9, unaligned - beq r10, aligned - ldq_u r9, 0(r16) - addq r18, r10, r18 - mskqh r8, r17, r8 - mskql r9, r17, r9 - bis r8, r9, r8 -aligned: - subq r18, 1, r10 - bic r10, 7, r10 - and r18, 7, r18 - beq r10, aligned_done -loop: - stq_u r8, 0(r16) - ldq_u r8, 8(r17) - subq r10, 8, r10 - lda r16,8(r16) - lda r17,8(r17) - bne r10, loop -aligned_done: - bne r18, few_left - stq_u r8, 0(r16) - br r31, finished - few_left: - mskql r8, r18, r10 - ldq_u r9, 0(r16) - mskqh r9, r18, r9 - bis r10, r9, r10 - stq_u r10, 0(r16) - br r31, finished -unaligned: - addq r17, r18, r25 - cmpule r18, 8, r9 - bne r9, unaligned_few_left - beq r10, unaligned_dest_aligned - and r16, 7, r10 - subq r31, r10, r10 - addq r10, 8, r10 - ldq_u r9, 7(r17) - extql r8, r17, r8 - extqh r9, r17, r9 - bis r8, r9, r12 - insql r12, r16, r12 - ldq_u r13, 0(r16) - mskql r13, r16, r13 - bis r12, r13, r12 - stq_u r12, 0(r16) - addq r16, r10, r16 - addq r17, r10, r17 - subq r18, r10, r18 - ldq_u r8, 0(r17) -unaligned_dest_aligned: - subq r18, 1, r10 - bic r10, 7, r10 - and r18, 7, r18 - beq r10, unaligned_partial_left -unaligned_loop: - ldq_u r9, 7(r17) - lda r17, 8(r17) - extql r8, r17, r12 - extqh r9, r17, r13 - subq r10, 8, r10 - bis r12, r13, r13 - stq r13, 0(r16) - lda r16, 8(r16) - beq r10, unaligned_second_partial_left - ldq_u r8, 7(r17) - lda r17, 8(r17) - extql r9, r17, r12 - extqh r8, r17, r13 - bis r12, r13, r13 - subq r10, 8, r10 - stq r13, 0(r16) - lda r16, 8(r16) - bne r10, unaligned_loop -unaligned_partial_left: - mov r8, r9 -unaligned_second_partial_left: - ldq_u r8, -1(r25) - extql r9, r17, r9 - extqh r8, r17, r8 - bis r8, r9, r8 - bne r18, few_left - stq_u r8, 0(r16) - br r31, finished -unaligned_few_left: - ldq_u r9, -1(r25) - extql r8, r17, r8 - extqh r9, r17, r9 - bis r8, r9, r8 - insqh r8, r16, r9 - insql r8, r16, r8 - lda r12, -1(r31) - mskql r12, r18, r13 - cmovne r13, r13, r12 - insqh r12, r16, r13 - insql r12, r16, r12 - addq r16, r18, r10 - ldq_u r14, 0(r16) - ldq_u r25, -1(r10) - bic r14, r12, r14 - bic r25, r13, r25 - and r8, r12, r8 - and r9, r13, r9 - bis r8, r14, r8 - bis r9, r25, r9 - stq_u r9, -1(r10) - stq_u r8, 0(r16) -finished: - hw_rei diff --git a/system/alpha/palcode/osfpal_cache_copy_unaligned.S b/system/alpha/palcode/osfpal_cache_copy_unaligned.S deleted file mode 100644 index b8651fa35..000000000 --- a/system/alpha/palcode/osfpal_cache_copy_unaligned.S +++ /dev/null @@ -1,5305 +0,0 @@ -/* - * Copyright (c) 2003, 2004 - * The Regents of The University of Michigan - * All Rights Reserved - * - * This code is part of the M5 simulator, developed by Nathan Binkert, - * Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions - * from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew - * Schultz. - * - * Permission is granted to use, copy, create derivative works and - * redistribute this software and such derivative works for any - * purpose, so long as the copyright notice above, this grant of - * permission, and the disclaimer below appear in all copies made; and - * so long as the name of The University of Michigan is not used in - * any advertising or publicity pertaining to the use or distribution - * of this software without specific, written prior authorization. - * - * THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE - * UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND - * WITHOUT WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER - * EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE. THE REGENTS OF THE UNIVERSITY OF MICHIGAN SHALL NOT BE - * LIABLE FOR ANY DAMAGES, INCLUDING DIRECT, SPECIAL, INDIRECT, - * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WITH RESPECT TO ANY CLAIM - * ARISING OUT OF OR IN CONNECTION WITH THE USE OF THE SOFTWARE, EVEN - * IF IT HAS BEEN OR IS HEREAFTER ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGES. - */ -/* -Copyright 1992, 1993, 1994, 1995 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -// modified to use the Hudson style "impure.h" instead of ev5_impure.sdl -// since we don't have a mechanism to expand the data structures.... pb Nov/95 - -// build_fixed_image: not sure what means -// real_mm to be replaced during rewrite -// remove_save_state remove_restore_state can be remooved to save space ?? - - -#include "ev5_defs.h" -#include "ev5_impure.h" -#include "ev5_alpha_defs.h" -#include "ev5_paldef.h" -#include "ev5_osfalpha_defs.h" -#include "fromHudsonMacros.h" -#include "fromHudsonOsf.h" -#include "dc21164FromGasSources.h" - -#ifdef SIMOS -#define DEBUGSTORE(c) nop -#else -#define DEBUGSTORE(c) \ - lda r13, c(zero) ; \ - bsr r25, debugstore -#endif - -#define DEBUG_EXC_ADDR()\ - bsr r25, put_exc_addr; \ - DEBUGSTORE(13) ; \ - DEBUGSTORE(10) - -#define egore 0 -#define acore 0 -#define beh_model 0 -#define ev5_p2 1 -#define ev5_p1 0 -#define ldvpte_bug_fix 1 -#define osf_chm_fix 0 - -// Do we want to do this?? pb -#define spe_fix 0 -// Do we want to do this?? pb -#define build_fixed_image 0 - -#define ev5_pass2 -#define enable_p4_fixups 0 -#define osf_svmin 1 -#define enable_physical_console 0 -#define fill_err_hack 0 -#define icflush_on_tbix 0 -#define max_cpuid 1 -#define perfmon_debug 0 -#define rawhide_system 0 -#define rax_mode 0 - - -// This is the fix for the user-mode super page references causing the machine to crash. -#if (spe_fix == 1) && (build_fixed_image==1) -#define hw_rei_spe br r31, hw_rei_update_spe -#else -#define hw_rei_spe hw_rei -#endif - - -// redefine a few of the distribution-code names to match the Hudson gas names. -// opcodes -#define ldqp ldq_p -#define stqp stq_p -#define ldlp ldl_p -#define stlp stl_p - -#define r0 $0 -#define r1 $1 -#define r2 $2 -#define r3 $3 -#define r4 $4 -#define r5 $5 -#define r6 $6 -#define r7 $7 -#define r8 $8 -#define r9 $9 -#define r10 $10 -#define r11 $11 -#define r12 $12 -#define r13 $13 -#define r14 $14 -#define r15 $15 -#define r16 $16 -#define r17 $17 -#define r18 $18 -#define r19 $19 -#define r20 $20 -#define r21 $21 -#define r22 $22 -#define r23 $23 -#define r24 $24 -#define r25 $25 -#define r26 $26 -#define r27 $27 -#define r28 $28 -#define r29 $29 -#define r30 $30 -#define r31 $31 - -// .title "EV5 OSF PAL" -// .ident "V1.18" -// -//**************************************************************************** -//* * -//* Copyright (c) 1992, 1993, 1994, 1995 * -//* by DIGITAL Equipment Corporation, Maynard, Mass. * -//* * -//* This software is furnished under a license and may be used and copied * -//* only in accordance with the terms of such license and with the * -//* inclusion of the above copyright notice. This software or any other * -//* copies thereof may not be provided or otherwise made available to any * -//* other person. No title to and ownership of the software is hereby * -//* transferred. * -//* * -//* The information in this software is subject to change without notice * -//* and should not be construed as a commitment by DIGITAL Equipment * -//* Corporation. * -//* * -//* DIGITAL assumes no responsibility for the use or reliability of its * -//* software on equipment which is not supplied by DIGITAL. * -//* * -//**************************************************************************** - -// .sbttl "Edit History" -//+ -// Who Rev When What -// ------------ --- ----------- -------------------------------- -// DB 0.0 03-Nov-1992 Start -// DB 0.1 28-Dec-1992 add swpctx -// DB 0.2 05-Jan-1993 Bug: PVC found mtpr dtb_CM -> virt ref bug -// DB 0.3 11-Jan-1993 rearrange trap entry points -// DB 0.4 01-Feb-1993 add tbi -// DB 0.5 04-Feb-1993 real MM, kludge reset flow, kludge swppal -// DB 0.6 09-Feb-1993 Bug: several stack pushers used r16 for pc (should be r14) -// DB 0.7 10-Feb-1993 Bug: pushed wrong PC (+8) on CALL_PAL OPCDEC -// Bug: typo on register number for store in wrunique -// Bug: rti to kern uses r16 as scratch -// Bug: callsys saving wrong value in pt_usp -// DB 0.8 16-Feb-1993 PVC: fix possible pt write->read bug in wrkgp, wrusp -// DB 0.9 18-Feb-1993 Bug: invalid_dpte_handler shifted pte twice -// Bug: rti stl_c could corrupt the stack -// Bug: unaligned returning wrong value in r17 (or should be and) -// DB 0.10 19-Feb-1993 Add draina, rd/wrmces, cflush, cserve, interrupt -// DB 0.11 23-Feb-1993 Turn caches on in reset flow -// DB 0.12 10-Mar-1993 Bug: wrong value for icsr for FEN in kern mode flow -// DB 0.13 15-Mar-1993 Bug: wrong value pushed for PC in invalid_dpte_handler if stack push tbmisses -// DB 0.14 23-Mar-1993 Add impure pointer paltemp, reshuffle some other paltemps to match VMS -// DB 0.15 15-Apr-1993 Combine paltemps for WHAMI and MCES -// DB 0.16 12-May-1993 Update reset -// New restriction: no mfpr exc_addr in cycle 1 of call_pal flows -// Bug: in wrmces, not clearing DPC, DSC -// Update swppal -// Add pal bugchecks, pal_save_state, pal_restore_state -// DB 0.17 24-May-1993 Add dfault_in_pal flow; fixup stack builder to have common state for pc/ps. -// New restriction: No hw_rei_stall in 0,1,2 after mtpr itb_asn -// DB 0.18 26-May-1993 PVC fixes -// JM 0.19 01-jul-1993 Bug: OSFPAL_CALPAL_OPCDEC, TRAP_OPCDEC -- move mt exc_addr after stores -// JM 0.20 07-jul-1993 Update cns_ and mchk_ names for impure.mar conversion to .sdl -// Bug: exc_addr was being loaded before stores that could dtb_miss in the following -// routines: TRAP_FEN,FEN_TO_OPCDEC,CALL_PAL_CALLSYS,RTI_TO_KERN -// JM 0.21 26-jul-1993 Bug: move exc_addr load after ALL stores in the following routines: -// TRAP_IACCVIO::,TRAP_OPCDEC::,TRAP_ARITH::,TRAP_FEN:: -// dfault_trap_cont:,fen_to_opcdec:,invalid_dpte_handler: -// osfpal_calpal_opcdec:,CALL_PAL_callsys::,TRAP_UNALIGN:: -// Bugs from PVC: trap_unalign - mt pt0 ->mf pt0 within 2 cycles -// JM 0.22 28-jul-1993 Add WRIPIR instruction -// JM 0.23 05-aug-1993 Bump version number for release -// JM 0.24 11-aug-1993 Bug: call_pal_swpipl - palshadow write -> hw_rei violation -// JM 0.25 09-sep-1993 Disable certain "hidden" pvc checks in call_pals; -// New restriction: No hw_rei_stall in 0,1,2,3,4 after mtpr itb_asn - affects HALT(raxmode), -// and SWPCTX -// JM 0.26 07-oct-1993 Re-implement pal_version -// JM 0.27 12-oct-1993 One more time: change pal_version format to conform to SRM -// JM 0.28 14-oct-1993 Change ic_flush routine to pal_ic_flush -// JM 0.29 19-oct-1993 BUG(?): dfault_in_pal: use exc_addr to check for dtbmiss,itbmiss check instead -// of mm_stat<opcode>. mm_stat contains original opcode, not hw_ld. -// JM 0.30 28-oct-1993 BUG: PVC violation - mf exc_addr in first cycles of call_pal in rti,retsys -// JM 0.31 15-nov-1993 BUG: WRFEN trashing r0 -// JM 0.32 21-nov-1993 BUG: dtb_ldq,itb_ldq (used in dfault_in_pal) not defined when real_mm=0 -// JM 0.33 24-nov-1993 save/restore_state - -// BUG: use ivptbr to restore mvptbr -// BUG: adjust hw_ld/st base/offsets to accomodate 10-bit offset limit -// CHANGE: Load 2 pages into dtb to accomodate compressed logout area/multiprocessors -// JM 0.34 20-dec-1993 BUG: set r11<mode> to kernel for ksnv halt case -// BUG: generate ksnv halt when tb miss on kernel stack accesses -// save exc_addr in r14 for invalid_dpte stack builder -// JM 0.35 30-dec-1993 BUG: PVC violation in trap_arith - mt exc_sum in shadow of store with mf exc_mask in -// the same shadow -// JM 0.36 6-jan-1994 BUG: fen_to_opcdec - savePC should be PC+4, need to save old PS, update new PS -// New palcode restiction: mt icsr<fpe,hwe> --> 3 bubbles to hw_rei --affects wrfen -// JM 0.37 25-jan-1994 BUG: PVC violations in restore_state - mt dc_mode/maf_mode ->mbox instructions -// Hide impure area manipulations in macros -// BUG: PVC violation in save and restore state-- move mt icsr out of shadow of ld/st -// Add some pvc_violate statements -// JM 0.38 1-feb-1994 Changes to save_state: save pt1; don't save r31,f31; update comments to reflect reality; -// Changes to restore_state: restore pt1, icsr; don't restore r31,f31; update comments -// Add code to ensure fen bit set in icsr before ldt -// conditionally compile rax_more_reset out. -// move ldqp,stqp macro definitions to ev5_pal_macros.mar and add .mcall's for them here -// move rax reset stuff to ev5_osf_system_pal.m64 -// JM 0.39 7-feb-1994 Move impure pointer to pal scratch space. Use former pt_impure for bc_ctl shadow -// and performance monitoring bits -// Change to save_state routine to save more iprs. -// JM 0.40 19-feb-1994 Change algorithm in save/restore_state routines; add f31,r31 back in -// JM 0.41 21-feb-1994 Add flags to compile out save/restore state (not needed in some systems) -// remove_save_state,remove_restore_state;fix new pvc violation in save_state -// JM 0.42 22-feb-1994 BUG: save_state overwriting r3 -// JM 0.43 24-feb-1994 BUG: save_state saving wrong icsr -// JM 0.44 28-feb-1994 Remove ic_flush from wr_tbix instructions -// JM 0.45 15-mar-1994 BUG: call_pal_tbi trashes a0 prior to range check (instruction order problem) -// New pal restriction in pal_restore_state: icsr<fpe>->floating instr = 3 bubbles -// Add exc_sum and exc_mask to pal_save_state (not restore) -// JM 0.46 22-apr-1994 Move impure pointer back into paltemp; Move bc_ctl shadow and pmctr_ctl into impure -// area. -// Add performance counter support to swpctx and wrperfmon -// JM 0.47 9-may-1994 Bump version # (for ev5_osf_system_pal.m64 sys_perfmon fix) -// JM 0.48 13-jun-1994 BUG: trap_interrupt --> put new ev5 ipl at 30 for all osfipl6 interrupts -// JM 0.49 8-jul-1994 BUG: In the unlikely (impossible?) event that the branch to pal_pal_bug_check is -// taken in the interrupt flow, stack is pushed twice. -// SWPPAL - update to support ECO 59 to allow 0 as a valid address -// Add itb flush to save/restore state routines -// Change hw_rei to hw_rei_stall in ic_flush routine. Shouldn't be necessary, but -// conforms to itbia restriction. -// Added enable_physical_console flag (for enter/exit console routines only) -// JM 0.50 29-jul-1994 Add code to dfault & invalid_dpte_handler to ignore exceptions on a -// load to r31/f31. changed dfault_fetch_err to dfault_fetch_ldr31_err and -// nmiss_fetch_err to nmiss_fetch_ldr31_err. -// JM 1.00 1-aug-1994 Add pass2 support (swpctx) -// JM 1.01 2-aug-1994 swppal now passes bc_ctl/bc_config in r1/r2 -// JM 1.02 15-sep-1994 BUG: swpctx missing shift of pme bit to correct position in icsr (pass2) -// Moved perfmon code here from system file. -// BUG: pal_perfmon - enable function not saving correct enables when pme not set (pass1) -// JM 1.03 3-oct-1994 Added (pass2 only) code to wrperfmon enable function to look at pme bit. -// JM 1.04 14-oct-1994 BUG: trap_interrupt - ISR read (and saved) before INTID -- INTID can change -// after ISR read, but we won't catch the ISR update. reverse order -// JM 1.05 17-nov-1994 Add code to dismiss UNALIGN trap if LD r31/F31 -// JM 1.06 28-nov-1994 BUG: missing mm_stat shift for store case in trap_unalign (new bug due to "dismiss" code) -// JM 1.07 1-dec-1994 EV5 PASS1,2,3 BUG WORKAROUND: Add flag LDVPTE_BUG_FIX. In DTBMISS_DOUBLE, branch to -// DTBMISS_SINGLE if not in palmode. -// JM 1.08 9-jan-1995 Bump version number for change to EV5_OSF_SYSTEM_PAL.M64 - ei_stat fix in mchk logout frame -// JM 1.09 2-feb-1995 Add flag "spe_fix" and accompanying code to workaround pre-pass4 bug: Disable Ibox -// superpage mode in User mode and re-enable in kernel mode. -// EV5_OSF_SYSTEM_PAL.M64 and EV5_PALDEF.MAR (added pt_misc_v_cm) also changed to support this. -// JM 1.10 24-feb-1995 Set ldvpte_bug_fix regardless of ev5 pass. set default to ev5_p2 -// ES 1.11 10-mar-1995 Add flag "osf_chm_fix" to enable dcache in user mode only to avoid -// cpu bug. -// JM 1.12 17-mar-1995 BUG FIX: Fix F0 corruption problem in pal_restore_state -// ES 1.13 17-mar-1995 Refine osf_chm_fix -// ES 1.14 20-mar-1995 Don't need as many stalls before hw_rei_stall in chm_fix -// ES 1.15 21-mar-1995 Add a stall to avoid a pvc violation in pal_restore_state -// Force pvc checking of exit_console -// ES 1.16 26-apr-1995 In the wrperfmon disable function, correct meaning of R17<2:0> to ctl2,ctl2,ctl0 -// ES 1.17 01-may-1995 In hw_rei_update_spe code, in the osf_chm fix, use bic and bis (self-correcting) -// instead of xor to maintain previous mode in pt_misc -// ES 1.18 14-jul-1995 In wrperfmon enable on pass2, update pmctr even if current process does -// not have pme set. The bits in icsr maintain the master enable state. -// In sys_reset, add icsr<17>=1 for ev56 byte/word eco enable -// -#define vmaj 1 -#define vmin 18 -#define vms_pal 1 -#define osf_pal 2 -#define pal_type osf_pal -#define osfpal_version_l ((pal_type<<16) | (vmaj<<8) | (vmin<<0)) -//- - -// .sbttl "PALtemp register usage" - -//+ -// The EV5 Ibox holds 24 PALtemp registers. This maps the OSF PAL usage -// for these PALtemps: -// -// pt0 local scratch -// pt1 local scratch -// pt2 entUna pt_entUna -// pt3 CPU specific impure area pointer pt_impure -// pt4 memory management temp -// pt5 memory management temp -// pt6 memory management temp -// pt7 entIF pt_entIF -// pt8 intmask pt_intmask -// pt9 entSys pt_entSys -// pt10 -// pt11 entInt pt_entInt -// pt12 entArith pt_entArith -// pt13 reserved for system specific PAL -// pt14 reserved for system specific PAL -// pt15 reserved for system specific PAL -// pt16 MISC: scratch ! WHAMI<7:0> ! 0 0 0 MCES<4:0> pt_misc, pt_whami, pt_mces -// pt17 sysval pt_sysval -// pt18 usp pt_usp -// pt19 ksp pt_ksp -// pt20 PTBR pt_ptbr -// pt21 entMM pt_entMM -// pt22 kgp pt_kgp -// pt23 PCBB pt_pcbb -// -//- - -// .sbttl "PALshadow register usage" -// -//+ -// -// EV5 shadows R8-R14 and R25 when in PALmode and ICSR<shadow_enable> = 1. -// This maps the OSF PAL usage of R8 - R14 and R25: -// -// r8 ITBmiss/DTBmiss scratch -// r9 ITBmiss/DTBmiss scratch -// r10 ITBmiss/DTBmiss scratch -// r11 PS -// r12 local scratch -// r13 local scratch -// r14 local scratch -// r25 local scratch -// -// -//- - -// .sbttl "ALPHA symbol definitions" -// _OSF_PSDEF GLOBAL -// _OSF_PTEDEF GLOBAL -// _OSF_VADEF GLOBAL -// _OSF_PCBDEF GLOBAL -// _OSF_SFDEF GLOBAL -// _OSF_MMCSR_DEF GLOBAL -// _SCBDEF GLOBAL -// _FRMDEF GLOBAL -// _EXSDEF GLOBAL -// _OSF_A0_DEF GLOBAL -// _MCESDEF GLOBAL - -// .sbttl "EV5 symbol definitions" - -// _EV5DEF -// _PALTEMP -// _MM_STAT_DEF -// _EV5_MM -// _EV5_IPLDEF - -// _HALT_CODES GLOBAL -// _MCHK_CODES GLOBAL - -// _PAL_IMPURE -// _PAL_LOGOUT - - - - -// .sbttl "PALcode configuration options" - -// There are a number of options that may be assembled into this version of -// PALcode. They should be adjusted in a prefix assembly file (i.e. do not edit -// the following). The options that can be adjusted cause the resultant PALcode -// to reflect the desired target system. - - -#define osfpal 1 // This is the PALcode for OSF. - -#ifndef rawhide_system - -#define rawhide_system 0 -#endif - - -#ifndef real_mm -// Page table translation vs 1-1 mapping -#define real_mm 1 -#endif - - -#ifndef rax_mode - -#define rax_mode 0 -#endif - -#ifndef egore -// End of reset flow starts a program at 200000(hex). -#define egore 1 -#endif - -#ifndef acore -// End of reset flow starts a program at 40000(hex). -#define acore 0 -#endif - - -// assume acore+egore+rax_mode lt 2 // Assertion checker - -#ifndef beh_model -// EV5 behavioral model specific code -#define beh_model 1 -#endif - -#ifndef init_cbox -// Reset flow init of Bcache and Scache -#define init_cbox 1 -#endif - -#ifndef disable_crd -// Decides whether the reset flow will disable -#define disable_crd 0 -#endif - - // correctable read interrupts via ICSR -#ifndef perfmon_debug -#define perfmon_debug 0 -#endif - -#ifndef icflush_on_tbix -#define icflush_on_tbix 0 -#endif - -#ifndef remove_restore_state -#define remove_restore_state 0 -#endif - -#ifndef remove_save_state -#define remove_save_state 0 -#endif - -#ifndef enable_physical_console -#define enable_physical_console 0 -#endif - -#ifndef ev5_p1 -#define ev5_p1 0 -#endif - -#ifndef ev5_p2 -#define ev5_p2 1 -#endif - -// assume ev5_p1+ev5_p2 eq 1 - -#ifndef ldvpte_bug_fix -#define ldvpte_bug_fix 1 // If set, fix ldvpte bug in dtbmiss_double flow. -#endif - -#ifndef spe_fix -// If set, disable super-page mode in user mode and re-enable -#define spe_fix 0 -#endif - // in kernel. Workaround for cpu bug. -#ifndef build_fixed_image -#define build_fixed_image 0 -#endif - - -#ifndef fill_err_hack -// If set, disable fill_error mode in user mode and re-enable -#define fill_err_hack 0 -#endif - - // in kernel. Workaround for cpu bug. - -// .macro hw_rei_spe -// .iif eq spe_fix, hw_rei -//#if spe_fix != 0 -// -// -//#define hw_rei_chm_count hw_rei_chm_count + 1 -// p4_fixup_label \hw_rei_chm_count -// .iif eq build_fixed_image, br r31, hw_rei_update_spe -// .iif ne build_fixed_image, hw_rei -//#endif -// -// .endm - -// Add flag "osf_chm_fix" to enable dcache in user mode only -// to avoid cpu bug. - -#ifndef osf_chm_fix -// If set, enable D-Cache in -#define osf_chm_fix 0 -#endif - -#if osf_chm_fix != 0 -// user mode only. -#define hw_rei_chm_count 0 -#endif - -#if osf_chm_fix != 0 - -#define hw_rei_stall_chm_count 0 -#endif - -#ifndef enable_p4_fixups - -#define enable_p4_fixups 0 -#endif - - // If set, do EV5 Pass 4 fixups -#if spe_fix == 0 - -#define osf_chm_fix 0 -#endif - -#if spe_fix == 0 - -#define enable_p4_fixups 0 -#endif - - // Only allow fixups if fix enabled - - //Turn off fill_errors and MEM_NEM in user mode -// .macro fill_error_hack ?L10_, ?L20_, ?L30_, ?L40_ -// //save r22,r23,r24 -// stqp r22, 0x150(r31) //add -// stqp r23, 0x158(r31) //contents -// stqp r24, 0x160(r31) //bit mask -// -// lda r22, 0x82(r31) -// ldah r22, 0x8740(r22) -// sll r22, 8, r22 -// ldlp r23, 0x80(r22) // r23 <- contents of CIA_MASK -// bis r23,r31,r23 -// -// lda r24, 0x8(r31) // r24 <- MEM_NEM bit -// beq r10, L10_ // IF user mode (r10<0> == 0) pal mode -// bic r23, r24, r23 // set fillerr_en bit -// br r31, L20_ // ELSE -//L10_: bis r23, r24, r23 // clear fillerr_en bit -//L20_: // ENDIF -// -// stlp r23, 0x80(r22) // write back the CIA_MASK register -// mb -// ldlp r23, 0x80(r22) -// bis r23,r31,r23 -// mb -// -// lda r22, 1(r31) // r22 <- 87.4000.0100 ptr to CIA_CTRL -// ldah r22, 0x8740(r22) -// sll r22, 8, r22 -// ldlp r23, 0(r22) // r23 <- contents of CIA_CTRL -// bis r23,r31,r23 -// -// -// lda r24, 0x400(r31) // r9 <- fillerr_en bit -// beq r10, L30_ // IF user mode (r10<0> == 0) pal mode -// bic r23, r24, r23 // set fillerr_en bit -// br r31, L40_ // ELSE -//L30_: bis r23, r24, r23 // clear fillerr_en bit -//L40_: // ENDIF -// -// stlp r23, 0(r22) // write back the CIA_CTRL register -// mb -// ldlp r23, 0(r22) -// bis r23,r31,r23 -// mb -// -// //restore r22,r23,r24 -// ldqp r22, 0x150(r31) -// ldqp r23, 0x158(r31) -// ldqp r24, 0x160(r31) -// -// .endm - -// multiprocessor support can be enabled for a max of n processors by -// setting the following to the number of processors on the system. -// Note that this is really the max cpuid. - -#ifndef max_cpuid -#define max_cpuid 8 -#endif - -#ifndef osf_svmin // platform specific palcode version number -#define osf_svmin 0 -#endif - - -#define osfpal_version_h ((max_cpuid<<16) | (osf_svmin<<0)) - -// .mcall ldqp // override macro64 definition with macro from library -// .mcall stqp // override macro64 definition with macro from library - - -// .psect _pal,mix -// huh pb pal_base: -// huh pb #define current_block_base . - pal_base - -// .sbttl "RESET - Reset Trap Entry Point" -//+ -// RESET - offset 0000 -// Entry: -// Vectored into via hardware trap on reset, or branched to -// on swppal. -// -// r0 = whami -// r1 = pal_base -// r2 = base of scratch area -// r3 = halt code -// -// -// Function: -// -//- - - .text 0 - . = 0x0000 - .globl Pal_Base -Pal_Base: - HDW_VECTOR(PAL_RESET_ENTRY) -Trap_Reset: - nop -#ifdef SIMOS - /* - * store into r1 - */ - br r1,sys_reset -#else - /* following is a srcmax change */ - - DEBUGSTORE(0x41) - /* The original code jumped using r1 as a linkage register to pass the base - of PALcode to the platform specific code. We use r1 to pass a parameter - from the SROM, so we hardcode the address of Pal_Base in platform.s - */ - br r31, sys_reset -#endif - - // Specify PAL version info as a constant - // at a known location (reset + 8). - - .long osfpal_version_l // <pal_type@16> ! <vmaj@8> ! <vmin@0> - .long osfpal_version_h // <max_cpuid@16> ! <osf_svmin@0> - .long 0 - .long 0 -pal_impure_start: - .quad 0 -pal_debug_ptr: - .quad 0 // reserved for debug pointer ; 20 -#if beh_model == 0 - - -#if enable_p4_fixups != 0 - - - .quad 0 - .long p4_fixup_hw_rei_fixup_table -#endif - -#else - - .quad 0 // - .quad 0 //0x0030 - .quad 0 - .quad 0 //0x0040 - .quad 0 - .quad 0 //0x0050 - .quad 0 - .quad 0 //0x0060 - .quad 0 -pal_enter_cns_address: - .quad 0 //0x0070 -- address to jump to from enter_console - .long <<sys_exit_console-pal_base>+1> //0x0078 -- offset to sys_exit_console (set palmode bit) -#endif - - - - -// .sbttl "IACCVIO- Istream Access Violation Trap Entry Point" - -//+ -// IACCVIO - offset 0080 -// Entry: -// Vectored into via hardware trap on Istream access violation or sign check error on PC. -// -// Function: -// Build stack frame -// a0 <- Faulting VA -// a1 <- MMCSR (1 for ACV) -// a2 <- -1 (for ifetch fault) -// vector via entMM -//- - - HDW_VECTOR(PAL_IACCVIO_ENTRY) -Trap_Iaccvio: - DEBUGSTORE(0x42) - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - bis r11, r31, r12 // Save PS - bge r25, TRAP_IACCVIO_10_ // no stack swap needed if cm=kern - - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r12 // Set new PS - mfpr r30, pt_ksp - -TRAP_IACCVIO_10_: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - mfpr r14, exc_addr // get pc - - stq r16, osfsf_a0(sp) // save regs - bic r14, 3, r16 // pass pc/va as a0 - - stq r17, osfsf_a1(sp) // a1 - or r31, mmcsr_c_acv, r17 // pass mm_csr as a1 - - stq r18, osfsf_a2(sp) // a2 - mfpr r13, pt_entmm // get entry point - - stq r11, osfsf_ps(sp) // save old ps - bis r12, r31, r11 // update ps - - stq r16, osfsf_pc(sp) // save pc - stq r29, osfsf_gp(sp) // save gp - - mtpr r13, exc_addr // load exc_addr with entMM - // 1 cycle to hw_rei - mfpr r29, pt_kgp // get the kgp - - subq r31, 1, r18 // pass flag of istream, as a2 - hw_rei_spe - - -// .sbttl "INTERRUPT- Interrupt Trap Entry Point" - -//+ -// INTERRUPT - offset 0100 -// Entry: -// Vectored into via trap on hardware interrupt -// -// Function: -// check for halt interrupt -// check for passive release (current ipl geq requestor) -// if necessary, switch to kernel mode -// push stack frame, update ps (including current mode and ipl copies), sp, and gp -// pass the interrupt info to the system module -// -//- - - - HDW_VECTOR(PAL_INTERRUPT_ENTRY) -Trap_Interrupt: - mfpr r13, ev5__intid // Fetch level of interruptor - mfpr r25, ev5__isr // Fetch interrupt summary register - - srl r25, isr_v_hlt, r9 // Get HLT bit - mfpr r14, ev5__ipl - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kern - blbs r9, sys_halt_interrupt // halt_interrupt if HLT bit set - - cmple r13, r14, r8 // R8 = 1 if intid .less than or eql. ipl - bne r8, sys_passive_release // Passive release is current rupt is lt or eq ipl - - and r11, osfps_m_mode, r10 // get mode bit - beq r10, TRAP_INTERRUPT_10_ // Skip stack swap in kernel - - mtpr r30, pt_usp // save user stack - mfpr r30, pt_ksp // get kern stack - -TRAP_INTERRUPT_10_: - lda sp, (0-osfsf_c_size)(sp)// allocate stack space - mfpr r14, exc_addr // get pc - - stq r11, osfsf_ps(sp) // save ps - stq r14, osfsf_pc(sp) // save pc - - stq r29, osfsf_gp(sp) // push gp - stq r16, osfsf_a0(sp) // a0 - -// pvc_violate 354 // ps is cleared anyway, if store to stack faults. - mtpr r31, ev5__ps // Set Ibox current mode to kernel - stq r17, osfsf_a1(sp) // a1 - - stq r18, osfsf_a2(sp) // a2 - subq r13, 0x11, r12 // Start to translate from EV5IPL->OSFIPL - - srl r12, 1, r8 // 1d, 1e: ipl 6. 1f: ipl 7. - subq r13, 0x1d, r9 // Check for 1d, 1e, 1f - - cmovge r9, r8, r12 // if .ge. 1d, then take shifted value - bis r12, r31, r11 // set new ps - - mfpr r12, pt_intmask - and r11, osfps_m_ipl, r14 // Isolate just new ipl (not really needed, since all non-ipl bits zeroed already) - -#ifdef SIMOS - /* - * Lance had space problems. We don't. - */ - extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL - mfpr r29, pt_kgp // update gp - mtpr r14, ev5__ipl // load the new IPL into Ibox -#else -// Moved the following three lines to sys_interrupt to make room for debug -// extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL -// mfpr r29, pt_kgp // update gp - -// mtpr r14, ev5__ipl // load the new IPL into Ibox -#endif - br r31, sys_interrupt // Go handle interrupt - - - -// .sbttl "ITBMISS- Istream TBmiss Trap Entry Point" - -//+ -// ITBMISS - offset 0180 -// Entry: -// Vectored into via hardware trap on Istream translation buffer miss. -// -// Function: -// Do a virtual fetch of the PTE, and fill the ITB if the PTE is valid. -// Can trap into DTBMISS_DOUBLE. -// This routine can use the PALshadow registers r8, r9, and r10 -// -//- - - HDW_VECTOR(PAL_ITB_MISS_ENTRY) -Trap_Itbmiss: -#if real_mm == 0 - - - // Simple 1-1 va->pa mapping - - nop // Pad to align to E1 - mfpr r8, exc_addr - - srl r8, page_offset_size_bits, r9 - sll r9, 32, r9 - - lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE - mtpr r9, itb_pte // E1 - - hw_rei_stall // Nital says I don't have to obey shadow wait rule here. -#else - - // Real MM mapping - nop - mfpr r8, ev5__ifault_va_form // Get virtual address of PTE. - - nop - mfpr r10, exc_addr // Get PC of faulting instruction in case of DTBmiss. - -pal_itb_ldq: - ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss - mtpr r10, exc_addr // Restore exc_address if there was a trap. - - mfpr r31, ev5__va // Unlock VA in case there was a double miss - nop - - and r8, osfpte_m_foe, r25 // Look for FOE set. - blbc r8, invalid_ipte_handler // PTE not valid. - - nop - bne r25, foe_ipte_handler // FOE is set - - nop - mtpr r8, ev5__itb_pte // Ibox remembers the VA, load the PTE into the ITB. - - hw_rei_stall // - -#endif - - - - -// .sbttl "DTBMISS_SINGLE - Dstream Single TBmiss Trap Entry Point" - -//+ -// DTBMISS_SINGLE - offset 0200 -// Entry: -// Vectored into via hardware trap on Dstream single translation buffer miss. -// -// Function: -// Do a virtual fetch of the PTE, and fill the DTB if the PTE is valid. -// Can trap into DTBMISS_DOUBLE. -// This routine can use the PALshadow registers r8, r9, and r10 -//- - - HDW_VECTOR(PAL_DTB_MISS_ENTRY) -Trap_Dtbmiss_Single: -#if real_mm == 0 - // Simple 1-1 va->pa mapping - mfpr r8, va // E0 - srl r8, page_offset_size_bits, r9 - - sll r9, 32, r9 - lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE - - mtpr r9, dtb_pte // E0 - nop // Pad to align to E0 - - - - mtpr r8, dtb_tag // E0 - nop - - nop // Pad tag write - nop - - nop // Pad tag write - nop - - hw_rei -#else - mfpr r8, ev5__va_form // Get virtual address of PTE - 1 cycle delay. E0. - mfpr r10, exc_addr // Get PC of faulting instruction in case of error. E1. - -// DEBUGSTORE(0x45) -// DEBUG_EXC_ADDR() - // Real MM mapping - mfpr r9, ev5__mm_stat // Get read/write bit. E0. - mtpr r10, pt6 // Stash exc_addr away - -pal_dtb_ldq: - ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss - nop // Pad MF VA - - mfpr r10, ev5__va // Get original faulting VA for TB load. E0. - nop - - mtpr r8, ev5__dtb_pte // Write DTB PTE part. E0. - blbc r8, invalid_dpte_handler // Handle invalid PTE - - mtpr r10, ev5__dtb_tag // Write DTB TAG part, completes DTB load. No virt ref for 3 cycles. - mfpr r10, pt6 - - // Following 2 instructions take 2 cycles - mtpr r10, exc_addr // Return linkage in case we trapped. E1. - mfpr r31, pt0 // Pad the write to dtb_tag - - hw_rei // Done, return -#endif - - - - -// .sbttl "DTBMISS_DOUBLE - Dstream Double TBmiss Trap Entry Point" - -//+ -// DTBMISS_DOUBLE - offset 0280 -// Entry: -// Vectored into via hardware trap on Double TBmiss from single miss flows. -// -// r8 - faulting VA -// r9 - original MMstat -// r10 - original exc_addr (both itb,dtb miss) -// pt6 - original exc_addr (dtb miss flow only) -// VA IPR - locked with original faulting VA -// -// Function: -// Get PTE, if valid load TB and return. -// If not valid then take TNV/ACV exception. -// -// pt4 and pt5 are reserved for this flow. -// -// -//- - - HDW_VECTOR(PAL_DOUBLE_MISS_ENTRY) -Trap_Dtbmiss_double: -#if ldvpte_bug_fix != 0 - mtpr r8, pt4 // save r8 to do exc_addr check - mfpr r8, exc_addr - blbc r8, Trap_Dtbmiss_Single //if not in palmode, should be in the single routine, dummy! - mfpr r8, pt4 // restore r8 -#endif - nop - mtpr r22, pt5 // Get some scratch space. E1. - // Due to virtual scheme, we can skip the first lookup and go - // right to fetch of level 2 PTE - sll r8, (64-((2*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA - mtpr r21, pt4 // Get some scratch space. E1. - - srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8 - mfpr r21, pt_ptbr // Get physical address of the page table. - - nop - addq r21, r22, r21 // Index into page table for level 2 PTE. - - sll r8, (64-((1*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA - ldqp r21, 0(r21) // Get level 2 PTE (addr<2:0> ignored) - - srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8 - blbc r21, double_pte_inv // Check for Invalid PTE. - - srl r21, 32, r21 // extract PFN from PTE - sll r21, page_offset_size_bits, r21 // get PFN * 2^13 for add to <seg3>*8 - - addq r21, r22, r21 // Index into page table for level 3 PTE. - nop - - ldqp r21, 0(r21) // Get level 3 PTE (addr<2:0> ignored) - blbc r21, double_pte_inv // Check for invalid PTE. - - mtpr r21, ev5__dtb_pte // Write the PTE. E0. - mfpr r22, pt5 // Restore scratch register - - mtpr r8, ev5__dtb_tag // Write the TAG. E0. No virtual references in subsequent 3 cycles. - mfpr r21, pt4 // Restore scratch register - - nop // Pad write to tag. - nop - - nop // Pad write to tag. - nop - - hw_rei - - - -// .sbttl "UNALIGN -- Dstream unalign trap" -//+ -// UNALIGN - offset 0300 -// Entry: -// Vectored into via hardware trap on unaligned Dstream reference. -// -// Function: -// Build stack frame -// a0 <- Faulting VA -// a1 <- Opcode -// a2 <- src/dst register number -// vector via entUna -//- - - HDW_VECTOR(PAL_UNALIGN_ENTRY) -Trap_Unalign: -/* DEBUGSTORE(0x47)*/ - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - mfpr r8, ev5__mm_stat // Get mmstat --ok to use r8, no tbmiss - mfpr r14, exc_addr // get pc - - srl r8, mm_stat_v_ra, r13 // Shift Ra field to ls bits - blbs r14, pal_pal_bug_check // Bugcheck if unaligned in PAL - - blbs r8, UNALIGN_NO_DISMISS // lsb only set on store or fetch_m - // not set, must be a load - and r13, 0x1F, r8 // isolate ra - - cmpeq r8, 0x1F, r8 // check for r31/F31 - bne r8, dfault_fetch_ldr31_err // if its a load to r31 or f31 -- dismiss the fault - -UNALIGN_NO_DISMISS: - bis r11, r31, r12 // Save PS - bge r25, UNALIGN_NO_DISMISS_10_ // no stack swap needed if cm=kern - - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r12 // Set new PS - mfpr r30, pt_ksp - -UNALIGN_NO_DISMISS_10_: - mfpr r25, ev5__va // Unlock VA - lda sp, 0-osfsf_c_size(sp)// allocate stack space - - mtpr r25, pt0 // Stash VA - stq r18, osfsf_a2(sp) // a2 - - stq r11, osfsf_ps(sp) // save old ps - srl r13, mm_stat_v_opcode-mm_stat_v_ra, r25// Isolate opcode - - stq r29, osfsf_gp(sp) // save gp - addq r14, 4, r14 // inc PC past the ld/st - - stq r17, osfsf_a1(sp) // a1 - and r25, mm_stat_m_opcode, r17// Clean opocde for a1 - - stq r16, osfsf_a0(sp) // save regs - mfpr r16, pt0 // a0 <- va/unlock - - stq r14, osfsf_pc(sp) // save pc - mfpr r25, pt_entuna // get entry point - - - bis r12, r31, r11 // update ps - br r31, unalign_trap_cont - - - - -// .sbttl "DFAULT - Dstream Fault Trap Entry Point" - -//+ -// DFAULT - offset 0380 -// Entry: -// Vectored into via hardware trap on dstream fault or sign check error on DVA. -// -// Function: -// Ignore faults on FETCH/FETCH_M -// Check for DFAULT in PAL -// Build stack frame -// a0 <- Faulting VA -// a1 <- MMCSR (1 for ACV, 2 for FOR, 4 for FOW) -// a2 <- R/W -// vector via entMM -// -//- - HDW_VECTOR(PAL_D_FAULT_ENTRY) -Trap_Dfault: -// DEBUGSTORE(0x48) - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - mfpr r13, ev5__mm_stat // Get mmstat - mfpr r8, exc_addr // get pc, preserve r14 - - srl r13, mm_stat_v_opcode, r9 // Shift opcode field to ls bits - blbs r8, dfault_in_pal - - bis r8, r31, r14 // move exc_addr to correct place - bis r11, r31, r12 // Save PS - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - and r9, mm_stat_m_opcode, r9 // Clean all but opcode - - cmpeq r9, evx_opc_sync, r9 // Is the opcode fetch/fetchm? - bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault - - //dismiss exception if load to r31/f31 - blbs r13, dfault_no_dismiss // mm_stat<0> set on store or fetchm - - // not a store or fetch, must be a load - srl r13, mm_stat_v_ra, r9 // Shift rnum to low bits - - and r9, 0x1F, r9 // isolate rnum - nop - - cmpeq r9, 0x1F, r9 // Is the rnum r31 or f31? - bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault - -dfault_no_dismiss: - and r13, 0xf, r13 // Clean extra bits in mm_stat - bge r25, dfault_trap_cont // no stack swap needed if cm=kern - - - mtpr r30, pt_usp // save user stack - bis r31, r31, r12 // Set new PS - - mfpr r30, pt_ksp - br r31, dfault_trap_cont - - - - - -// .sbttl "MCHK - Machine Check Trap Entry Point" - -//+ -// MCHK - offset 0400 -// Entry: -// Vectored into via hardware trap on machine check. -// -// Function: -// -//- - - HDW_VECTOR(PAL_MCHK_ENTRY) -Trap_Mchk: - DEBUGSTORE(0x49) - mtpr r31, ic_flush_ctl // Flush the Icache - br r31, sys_machine_check - - - - -// .sbttl "OPCDEC - Illegal Opcode Trap Entry Point" - -//+ -// OPCDEC - offset 0480 -// Entry: -// Vectored into via hardware trap on illegal opcode. -// -// Build stack frame -// a0 <- code -// a1 <- unpred -// a2 <- unpred -// vector via entIF -// -//- - - HDW_VECTOR(PAL_OPCDEC_ENTRY) -Trap_Opcdec: - DEBUGSTORE(0x4a) -//simos DEBUG_EXC_ADDR() - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - mfpr r14, exc_addr // get pc - blbs r14, pal_pal_bug_check // check opcdec in palmode - - bis r11, r31, r12 // Save PS - bge r25, TRAP_OPCDEC_10_ // no stack swap needed if cm=kern - - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r12 // Set new PS - mfpr r30, pt_ksp - -TRAP_OPCDEC_10_: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - addq r14, 4, r14 // inc pc - - stq r16, osfsf_a0(sp) // save regs - bis r31, osf_a0_opdec, r16 // set a0 - - stq r11, osfsf_ps(sp) // save old ps - mfpr r13, pt_entif // get entry point - - stq r18, osfsf_a2(sp) // a2 - stq r17, osfsf_a1(sp) // a1 - - stq r29, osfsf_gp(sp) // save gp - stq r14, osfsf_pc(sp) // save pc - - bis r12, r31, r11 // update ps - mtpr r13, exc_addr // load exc_addr with entIF - // 1 cycle to hw_rei, E1 - - mfpr r29, pt_kgp // get the kgp, E1 - - hw_rei_spe // done, E1 - - - - - - -// .sbttl "ARITH - Arithmetic Exception Trap Entry Point" - -//+ -// ARITH - offset 0500 -// Entry: -// Vectored into via hardware trap on arithmetic excpetion. -// -// Function: -// Build stack frame -// a0 <- exc_sum -// a1 <- exc_mask -// a2 <- unpred -// vector via entArith -// -//- - HDW_VECTOR(PAL_ARITH_ENTRY) -Trap_Arith: - DEBUGSTORE(0x4b) - and r11, osfps_m_mode, r12 // get mode bit - mfpr r31, ev5__va // unlock mbox - - bis r11, r31, r25 // save ps - mfpr r14, exc_addr // get pc - - nop - blbs r14, pal_pal_bug_check // arith trap from PAL - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - beq r12, TRAP_ARITH_10_ // if zero we are in kern now - - bis r31, r31, r25 // set the new ps - mtpr r30, pt_usp // save user stack - - nop - mfpr r30, pt_ksp // get kern stack - -TRAP_ARITH_10_: lda sp, 0-osfsf_c_size(sp) // allocate stack space - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - nop // Pad current mode write and stq - mfpr r13, ev5__exc_sum // get the exc_sum - - mfpr r12, pt_entarith - stq r14, osfsf_pc(sp) // save pc - - stq r17, osfsf_a1(sp) - mfpr r17, ev5__exc_mask // Get exception register mask IPR - no mtpr exc_sum in next cycle - - stq r11, osfsf_ps(sp) // save ps - bis r25, r31, r11 // set new ps - - stq r16, osfsf_a0(sp) // save regs - srl r13, exc_sum_v_swc, r16// shift data to correct position - - stq r18, osfsf_a2(sp) -// pvc_violate 354 // ok, but make sure reads of exc_mask/sum are not in same trap shadow - mtpr r31, ev5__exc_sum // Unlock exc_sum and exc_mask - - stq r29, osfsf_gp(sp) - mtpr r12, exc_addr // Set new PC - 1 bubble to hw_rei - E1 - - mfpr r29, pt_kgp // get the kern gp - E1 - hw_rei_spe // done - E1 - - - - - - -// .sbttl "FEN - Illegal Floating Point Operation Trap Entry Point" - -//+ -// FEN - offset 0580 -// Entry: -// Vectored into via hardware trap on illegal FP op. -// -// Function: -// Build stack frame -// a0 <- code -// a1 <- unpred -// a2 <- unpred -// vector via entIF -// -//- - - HDW_VECTOR(PAL_FEN_ENTRY) -Trap_Fen: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - mfpr r14, exc_addr // get pc - blbs r14, pal_pal_bug_check // check opcdec in palmode - - mfpr r13, ev5__icsr - nop - - bis r11, r31, r12 // Save PS - bge r25, TRAP_FEN_10_ // no stack swap needed if cm=kern - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r12 // Set new PS - mfpr r30, pt_ksp - -TRAP_FEN_10_: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - srl r13, icsr_v_fpe, r25 // Shift FP enable to bit 0 - - - stq r16, osfsf_a0(sp) // save regs - mfpr r13, pt_entif // get entry point - - stq r18, osfsf_a2(sp) // a2 - stq r11, osfsf_ps(sp) // save old ps - - stq r29, osfsf_gp(sp) // save gp - bis r12, r31, r11 // set new ps - - stq r17, osfsf_a1(sp) // a1 - blbs r25,fen_to_opcdec // If FP is enabled, this is really OPCDEC. - - bis r31, osf_a0_fen, r16 // set a0 - stq r14, osfsf_pc(sp) // save pc - - mtpr r13, exc_addr // load exc_addr with entIF - // 1 cycle to hw_rei -E1 - - mfpr r29, pt_kgp // get the kgp -E1 - - hw_rei_spe // done -E1 - -// FEN trap was taken, but the fault is really opcdec. - ALIGN_BRANCH -fen_to_opcdec: - addq r14, 4, r14 // save PC+4 - bis r31, osf_a0_opdec, r16 // set a0 - - stq r14, osfsf_pc(sp) // save pc - mtpr r13, exc_addr // load exc_addr with entIF - // 1 cycle to hw_rei - - mfpr r29, pt_kgp // get the kgp - hw_rei_spe // done - - - -// .sbttl "Misc handlers" - // Start area for misc code. -//+ -//dfault_trap_cont -// A dfault trap has been taken. The sp has been updated if necessary. -// Push a stack frame a vector via entMM. -// -// Current state: -// r12 - new PS -// r13 - MMstat -// VA - locked -// -//- - ALIGN_BLOCK -dfault_trap_cont: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - mfpr r25, ev5__va // Fetch VA/unlock - - stq r18, osfsf_a2(sp) // a2 - and r13, 1, r18 // Clean r/w bit for a2 - - stq r16, osfsf_a0(sp) // save regs - bis r25, r31, r16 // a0 <- va - - stq r17, osfsf_a1(sp) // a1 - srl r13, 1, r17 // shift fault bits to right position - - stq r11, osfsf_ps(sp) // save old ps - bis r12, r31, r11 // update ps - - stq r14, osfsf_pc(sp) // save pc - mfpr r25, pt_entmm // get entry point - - stq r29, osfsf_gp(sp) // save gp - cmovlbs r17, 1, r17 // a2. acv overrides fox. - - mtpr r25, exc_addr // load exc_addr with entMM - // 1 cycle to hw_rei - mfpr r29, pt_kgp // get the kgp - - hw_rei_spe // done - -//+ -//unalign_trap_cont -// An unalign trap has been taken. Just need to finish up a few things. -// -// Current state: -// r25 - entUna -// r13 - shifted MMstat -// -//- - ALIGN_BLOCK -unalign_trap_cont: - mtpr r25, exc_addr // load exc_addr with entUna - // 1 cycle to hw_rei - - - mfpr r29, pt_kgp // get the kgp - and r13, mm_stat_m_ra, r18 // Clean Ra for a2 - - hw_rei_spe // done - - - -//+ -// dfault_in_pal -// Dfault trap was taken, exc_addr points to a PAL PC. -// r9 - mmstat<opcode> right justified -// r8 - exception address -// -// These are the cases: -// opcode was STQ -- from a stack builder, KSP not valid halt -// r14 - original exc_addr -// r11 - original PS -// opcode was STL_C -- rti or retsys clear lock_flag by stack write, -// KSP not valid halt -// r11 - original PS -// r14 - original exc_addr -// opcode was LDQ -- retsys or rti stack read, KSP not valid halt -// r11 - original PS -// r14 - original exc_addr -// opcode was HW_LD -- itbmiss or dtbmiss, bugcheck due to fault on page tables -// r10 - original exc_addr -// r11 - original PS -// -// -//- - ALIGN_BLOCK -dfault_in_pal: - DEBUGSTORE(0x50) - bic r8, 3, r8 // Clean PC - mfpr r9, pal_base - - mfpr r31, va // unlock VA -#if real_mm != 0 - // if not real_mm, should never get here from miss flows - - subq r9, r8, r8 // pal_base - offset - - lda r9, pal_itb_ldq-pal_base(r8) - nop - - beq r9, dfault_do_bugcheck - lda r9, pal_dtb_ldq-pal_base(r8) - - beq r9, dfault_do_bugcheck -#endif - -// -// KSP invalid halt case -- -ksp_inval_halt: - DEBUGSTORE(76) - bic r11, osfps_m_mode, r11 // set ps to kernel mode - mtpr r0, pt0 - - mtpr r31, dtb_cm // Make sure that the CM IPRs are all kernel mode - mtpr r31, ips - - mtpr r14, exc_addr // Set PC to instruction that caused trouble -//orig pvc_jsr updpcb, bsr=1 - bsr r0, pal_update_pcb // update the pcb - - lda r0, hlt_c_ksp_inval(r31) // set halt code to hw halt - br r31, sys_enter_console // enter the console - - ALIGN_BRANCH -dfault_do_bugcheck: - bis r10, r31, r14 // bugcheck expects exc_addr in r14 - br r31, pal_pal_bug_check - - - ALIGN_BLOCK -//+ -// dfault_fetch_ldr31_err - ignore faults on fetch(m) and loads to r31/f31 -// On entry - -// r14 - exc_addr -// VA is locked -// -//- -dfault_fetch_ldr31_err: - mtpr r11, ev5__dtb_cm - mtpr r11, ev5__ps // Make sure ps hasn't changed - - mfpr r31, va // unlock the mbox - addq r14, 4, r14 // inc the pc to skip the fetch - - mtpr r14, exc_addr // give ibox new PC - mfpr r31, pt0 // pad exc_addr write - - hw_rei - - - - ALIGN_BLOCK -//+ -// sys_from_kern -// callsys from kernel mode - OS bugcheck machine check -// -//- -sys_from_kern: - mfpr r14, exc_addr // PC points to call_pal - subq r14, 4, r14 - - lda r25, mchk_c_os_bugcheck(r31) // fetch mchk code - br r31, pal_pal_mchk - - -// .sbttl "Continuation of long call_pal flows" - ALIGN_BLOCK -//+ -// wrent_tbl -// Table to write *int in paltemps. -// 4 instructions/entry -// r16 has new value -// -//- -wrent_tbl: -//orig pvc_jsr wrent, dest=1 - nop - mtpr r16, pt_entint - - mfpr r31, pt0 // Pad for mt->mf paltemp rule - hw_rei - - -//orig pvc_jsr wrent, dest=1 - nop - mtpr r16, pt_entarith - - mfpr r31, pt0 // Pad for mt->mf paltemp rule - hw_rei - - -//orig pvc_jsr wrent, dest=1 - nop - mtpr r16, pt_entmm - - mfpr r31, pt0 // Pad for mt->mf paltemp rule - hw_rei - - -//orig pvc_jsr wrent, dest=1 - nop - mtpr r16, pt_entif - - mfpr r31, pt0 // Pad for mt->mf paltemp rule - hw_rei - - -//orig pvc_jsr wrent, dest=1 - nop - mtpr r16, pt_entuna - - mfpr r31, pt0 // Pad for mt->mf paltemp rule - hw_rei - - -//orig pvc_jsr wrent, dest=1 - nop - mtpr r16, pt_entsys - - mfpr r31, pt0 // Pad for mt->mf paltemp rule - hw_rei - - ALIGN_BLOCK -//+ -// tbi_tbl -// Table to do tbi instructions -// 4 instructions per entry -//- -tbi_tbl: - // -2 tbia -//orig pvc_jsr tbi, dest=1 - mtpr r31, ev5__dtb_ia // Flush DTB - mtpr r31, ev5__itb_ia // Flush ITB - -#if icflush_on_tbix != 0 - - - br r31, pal_ic_flush // Flush Icache -#else - - hw_rei_stall -#endif - - nop // Pad table - - // -1 tbiap -//orig pvc_jsr tbi, dest=1 - mtpr r31, ev5__dtb_iap // Flush DTB - mtpr r31, ev5__itb_iap // Flush ITB - -#if icflush_on_tbix != 0 - - - br r31, pal_ic_flush // Flush Icache -#else - - hw_rei_stall -#endif - - nop // Pad table - - - // 0 unused -//orig pvc_jsr tbi, dest=1 - hw_rei // Pad table - nop - nop - nop - - - // 1 tbisi -//orig pvc_jsr tbi, dest=1 -#if icflush_on_tbix != 0 - - - - nop - br r31, pal_ic_flush_and_tbisi // Flush Icache - nop - nop // Pad table -#else - - nop - nop - mtpr r17, ev5__itb_is // Flush ITB - hw_rei_stall -#endif - - - - // 2 tbisd -//orig pvc_jsr tbi, dest=1 - mtpr r17, ev5__dtb_is // Flush DTB. - nop - - nop - hw_rei_stall - - - // 3 tbis -//orig pvc_jsr tbi, dest=1 - mtpr r17, ev5__dtb_is // Flush DTB -#if icflush_on_tbix != 0 - - - br r31, pal_ic_flush_and_tbisi // Flush Icache and ITB -#else - br r31, tbi_finish - ALIGN_BRANCH -tbi_finish: - mtpr r17, ev5__itb_is // Flush ITB - hw_rei_stall -#endif - - - - ALIGN_BLOCK -//+ -// bpt_bchk_common: -// Finish up the bpt/bchk instructions -//- -bpt_bchk_common: - stq r18, osfsf_a2(sp) // a2 - mfpr r13, pt_entif // get entry point - - stq r12, osfsf_ps(sp) // save old ps - stq r14, osfsf_pc(sp) // save pc - - stq r29, osfsf_gp(sp) // save gp - mtpr r13, exc_addr // load exc_addr with entIF - // 1 cycle to hw_rei - - mfpr r29, pt_kgp // get the kgp - - - hw_rei_spe // done - - - ALIGN_BLOCK -//+ -// rti_to_user -// Finish up the rti instruction -//- -rti_to_user: - mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles - mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei - - mtpr r31, ev5__ipl // set the ipl. No hw_rei for 2 cycles - mtpr r25, pt_ksp // save off incase RTI to user - - mfpr r30, pt_usp - hw_rei_spe // and back - - - ALIGN_BLOCK -//+ -// rti_to_kern -// Finish up the rti instruction -//- -rti_to_kern: - and r12, osfps_m_ipl, r11 // clean ps - mfpr r12, pt_intmask // get int mask - - extbl r12, r11, r12 // get mask for this ipl - mtpr r25, pt_ksp // save off incase RTI to user - - mtpr r12, ev5__ipl // set the new ipl. - or r25, r31, sp // sp - -// pvc_violate 217 // possible hidden mt->mf ipl not a problem in callpals - hw_rei - - ALIGN_BLOCK -//+ -// swpctx_cont -// Finish up the swpctx instruction -//- - -swpctx_cont: -#if ev5_p1 != 0 - - - bic r25, r24, r25 // clean icsr<FPE> - get_impure r8 // get impure pointer - - sll r12, icsr_v_fpe, r12 // shift new fen to pos - fix_impure_ipr r8 // adjust impure pointer - - restore_reg1 pmctr_ctl, r8, r8, ipr=1 // "ldqp" - get pmctr_ctl bits - srl r23, 32, r24 // move asn to low asn pos - - ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr - srl r22, osfpcb_v_pme, r22 // get pme down to bit 0 - - or r25, r12, r25 // icsr with new fen - sll r24, itb_asn_v_asn, r12 - -#else - - bic r25, r24, r25 // clean icsr<FPE,PMP> - sll r12, icsr_v_fpe, r12 // shift new fen to pos - - ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr - srl r22, osfpcb_v_pme, r22 // get pme down to bit 0 - - or r25, r12, r25 // icsr with new fen - srl r23, 32, r24 // move asn to low asn pos - - and r22, 1, r22 - sll r24, itb_asn_v_asn, r12 - - sll r22, icsr_v_pmp, r22 - nop - - or r25, r22, r25 // icsr with new pme -#endif - - sll r24, dtb_asn_v_asn, r24 - - subl r23, r13, r13 // gen new cc offset - mtpr r12, itb_asn // no hw_rei_stall in 0,1,2,3,4 - - mtpr r24, dtb_asn // Load up new ASN - mtpr r25, icsr // write the icsr - - sll r14, page_offset_size_bits, r14 // Move PTBR into internal position. - ldqp r25, osfpcb_q_usp(r16) // get new usp - - insll r13, 4, r13 // >> 32 -// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow - mtpr r14, pt_ptbr // load the new ptbr - - mtpr r13, cc // set new offset - ldqp r30, osfpcb_q_ksp(r16) // get new ksp - -// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow - mtpr r25, pt_usp // save usp - -#if ev5_p1 != 0 - - - blbc r8, no_pm_change // if monitoring all processes -- no need to change pm - - // otherwise, monitoring select processes - update pm - lda r25, 0x3F(r31) - cmovlbc r22, r31, r8 // if pme set, disable counters, otherwise use saved encodings - - sll r25, pmctr_v_ctl2, r25 // create ctl field bit mask - mfpr r22, ev5__pmctr - - and r8, r25, r8 // mask new ctl value - bic r22, r25, r22 // clear ctl field in pmctr - - or r8, r22, r8 - mtpr r8, ev5__pmctr - -no_pm_change: -#endif - - -#if osf_chm_fix != 0 - - - p4_fixup_hw_rei_stall // removes this section for Pass 4 by placing a hw_rei_stall here - -#if build_fixed_image != 0 - - - hw_rei_stall -#else - - mfpr r9, pt_pcbb // get FEN -#endif - - ldqp r9, osfpcb_q_fen(r9) - blbc r9, no_pm_change_10_ // skip if FEN disabled - - mb // ensure no outstanding fills - lda r12, 1<<dc_mode_v_dc_ena(r31) - mtpr r12, dc_mode // turn dcache on so we can flush it - nop // force correct slotting - mfpr r31, pt0 // no mbox instructions in 1,2,3,4 - mfpr r31, pt0 // no mbox instructions in 1,2,3,4 - mfpr r31, pt0 // no mbox instructions in 1,2,3,4 - mfpr r31, pt0 // no mbox instructions in 1,2,3,4 - - lda r8, 0(r31) // flood the dcache with junk data -no_pm_change_5_: ldqp r31, 0(r8) - lda r8, 0x20(r8) // touch each cache block - srl r8, 13, r9 - blbc r9, no_pm_change_5_ - - mb // ensure no outstanding fills - mtpr r31, dc_mode // turn the dcache back off - nop // force correct slotting - mfpr r31, pt0 // no hw_rei_stall in 0,1 -#endif - - -no_pm_change_10_: hw_rei_stall // back we go - - ALIGN_BLOCK -//+ -// swppal_cont - finish up the swppal call_pal -//- - -swppal_cont: - mfpr r2, pt_misc // get misc bits - sll r0, pt_misc_v_switch, r0 // get the "I've switched" bit - or r2, r0, r2 // set the bit - mtpr r31, ev5__alt_mode // ensure alt_mode set to 0 (kernel) - mtpr r2, pt_misc // update the chip - - or r3, r31, r4 - mfpr r3, pt_impure // pass pointer to the impure area in r3 -//orig fix_impure_ipr r3 // adjust impure pointer for ipr read -//orig restore_reg1 bc_ctl, r1, r3, ipr=1 // pass cns_bc_ctl in r1 -//orig restore_reg1 bc_config, r2, r3, ipr=1 // pass cns_bc_config in r2 -//orig unfix_impure_ipr r3 // restore impure pointer - lda r3, CNS_Q_IPR(r3) - RESTORE_SHADOW(r1,CNS_Q_BC_CTL,r3); - RESTORE_SHADOW(r1,CNS_Q_BC_CFG,r3); - lda r3, -CNS_Q_IPR(r3) - - or r31, r31, r0 // set status to success -// pvc_violate 1007 - jmp r31, (r4) // and call our friend, it's her problem now - - -swppal_fail: - addq r0, 1, r0 // set unknown pal or not loaded - hw_rei // and return - - -// .sbttl "Memory management" - - ALIGN_BLOCK -//+ -//foe_ipte_handler -// IFOE detected on level 3 pte, sort out FOE vs ACV -// -// on entry: -// with -// R8 = pte -// R10 = pc -// -// Function -// Determine TNV vs ACV vs FOE. Build stack and dispatch -// Will not be here if TNV. -//- - -foe_ipte_handler: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - bis r11, r31, r12 // Save PS for stack write - bge r25, foe_ipte_handler_10_ // no stack swap needed if cm=kern - - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r11 // Set new PS - mfpr r30, pt_ksp - - srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern - nop - -foe_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0> - lda sp, 0-osfsf_c_size(sp)// allocate stack space - - or r10, r31, r14 // Save pc/va in case TBmiss or fault on stack - mfpr r13, pt_entmm // get entry point - - stq r16, osfsf_a0(sp) // a0 - or r14, r31, r16 // pass pc/va as a0 - - stq r17, osfsf_a1(sp) // a1 - nop - - stq r18, osfsf_a2(sp) // a2 - lda r17, mmcsr_c_acv(r31) // assume ACV - - stq r16, osfsf_pc(sp) // save pc - cmovlbs r25, mmcsr_c_foe, r17 // otherwise FOE - - stq r12, osfsf_ps(sp) // save ps - subq r31, 1, r18 // pass flag of istream as a2 - - stq r29, osfsf_gp(sp) - mtpr r13, exc_addr // set vector address - - mfpr r29, pt_kgp // load kgp - hw_rei_spe // out to exec - - ALIGN_BLOCK -//+ -//invalid_ipte_handler -// TNV detected on level 3 pte, sort out TNV vs ACV -// -// on entry: -// with -// R8 = pte -// R10 = pc -// -// Function -// Determine TNV vs ACV. Build stack and dispatch. -//- - -invalid_ipte_handler: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - bis r11, r31, r12 // Save PS for stack write - bge r25, invalid_ipte_handler_10_ // no stack swap needed if cm=kern - - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r11 // Set new PS - mfpr r30, pt_ksp - - srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern - nop - -invalid_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0> - lda sp, 0-osfsf_c_size(sp)// allocate stack space - - or r10, r31, r14 // Save pc/va in case TBmiss on stack - mfpr r13, pt_entmm // get entry point - - stq r16, osfsf_a0(sp) // a0 - or r14, r31, r16 // pass pc/va as a0 - - stq r17, osfsf_a1(sp) // a1 - nop - - stq r18, osfsf_a2(sp) // a2 - and r25, 1, r17 // Isolate kre - - stq r16, osfsf_pc(sp) // save pc - xor r17, 1, r17 // map to acv/tnv as a1 - - stq r12, osfsf_ps(sp) // save ps - subq r31, 1, r18 // pass flag of istream as a2 - - stq r29, osfsf_gp(sp) - mtpr r13, exc_addr // set vector address - - mfpr r29, pt_kgp // load kgp - hw_rei_spe // out to exec - - - - - ALIGN_BLOCK -//+ -//invalid_dpte_handler -// INVALID detected on level 3 pte, sort out TNV vs ACV -// -// on entry: -// with -// R10 = va -// R8 = pte -// R9 = mm_stat -// PT6 = pc -// -// Function -// Determine TNV vs ACV. Build stack and dispatch -//- - - -invalid_dpte_handler: - mfpr r12, pt6 - blbs r12, tnv_in_pal // Special handler if original faulting reference was in PALmode - - bis r12, r31, r14 // save PC in case of tbmiss or fault - srl r9, mm_stat_v_opcode, r25 // shift opc to <0> - - mtpr r11, pt0 // Save PS for stack write - and r25, mm_stat_m_opcode, r25 // isolate opcode - - cmpeq r25, evx_opc_sync, r25 // is it FETCH/FETCH_M? - blbs r25, nmiss_fetch_ldr31_err // yes - - //dismiss exception if load to r31/f31 - blbs r9, invalid_dpte_no_dismiss // mm_stat<0> set on store or fetchm - - // not a store or fetch, must be a load - srl r9, mm_stat_v_ra, r25 // Shift rnum to low bits - - and r25, 0x1F, r25 // isolate rnum - nop - - cmpeq r25, 0x1F, r25 // Is the rnum r31 or f31? - bne r25, nmiss_fetch_ldr31_err // Yes, dismiss the fault - -invalid_dpte_no_dismiss: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - bge r25, invalid_dpte_no_dismiss_10_ // no stack swap needed if cm=kern - - srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern - mtpr r30, pt_usp // save user stack - - bis r31, r31, r11 // Set new PS - mfpr r30, pt_ksp - -invalid_dpte_no_dismiss_10_: srl r8, osfpte_v_kre, r12 // get kre to <0> - lda sp, 0-osfsf_c_size(sp)// allocate stack space - - or r10, r31, r25 // Save va in case TBmiss on stack - and r9, 1, r13 // save r/w flag - - stq r16, osfsf_a0(sp) // a0 - or r25, r31, r16 // pass va as a0 - - stq r17, osfsf_a1(sp) // a1 - or r31, mmcsr_c_acv, r17 // assume acv - - srl r12, osfpte_v_kwe-osfpte_v_kre, r25 // get write enable to <0> - stq r29, osfsf_gp(sp) - - stq r18, osfsf_a2(sp) // a2 - cmovlbs r13, r25, r12 // if write access move acv based on write enable - - or r13, r31, r18 // pass flag of dstream access and read vs write - mfpr r25, pt0 // get ps - - stq r14, osfsf_pc(sp) // save pc - mfpr r13, pt_entmm // get entry point - - stq r25, osfsf_ps(sp) // save ps - mtpr r13, exc_addr // set vector address - - mfpr r29, pt_kgp // load kgp - cmovlbs r12, mmcsr_c_tnv, r17 // make p2 be tnv if access ok else acv - - hw_rei_spe // out to exec - -//+ -// -// We come here if we are erring on a dtb_miss, and the instr is a -// fetch, fetch_m, of load to r31/f31. -// The PC is incremented, and we return to the program. -// essentially ignoring the instruction and error. -// -//- - ALIGN_BLOCK -nmiss_fetch_ldr31_err: - mfpr r12, pt6 - addq r12, 4, r12 // bump pc to pc+4 - - mtpr r12, exc_addr // and set entry point - mfpr r31, pt0 // pad exc_addr write - - hw_rei // - - ALIGN_BLOCK -//+ -// double_pte_inv -// We had a single tbmiss which turned into a double tbmiss which found -// an invalid PTE. Return to single miss with a fake pte, and the invalid -// single miss flow will report the error. -// -// on entry: -// r21 PTE -// r22 available -// VA IPR locked with original fault VA -// pt4 saved r21 -// pt5 saved r22 -// pt6 original exc_addr -// -// on return to tbmiss flow: -// r8 fake PTE -// -// -//- -double_pte_inv: - srl r21, osfpte_v_kre, r21 // get the kre bit to <0> - mfpr r22, exc_addr // get the pc - - lda r22, 4(r22) // inc the pc - lda r8, osfpte_m_prot(r31) // make a fake pte with xre and xwe set - - cmovlbc r21, r31, r8 // set to all 0 for acv if pte<kre> is 0 - mtpr r22, exc_addr // set for rei - - mfpr r21, pt4 // restore regs - mfpr r22, pt5 // restore regs - - hw_rei // back to tb miss - - ALIGN_BLOCK -//+ -//tnv_in_pal -// The only places in pal that ld or store are the -// stack builders, rti or retsys. Any of these mean we -// need to take a ksp not valid halt. -// -//- -tnv_in_pal: - - - br r31, ksp_inval_halt - - -// .sbttl "Icache flush routines" - - ALIGN_BLOCK -//+ -// Common Icache flush routine. -// -// -//- -pal_ic_flush: - nop - mtpr r31, ev5__ic_flush_ctl // Icache flush - E1 - nop - nop - -// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20) - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 10 - - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 20 - - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 30 - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 40 - - nop - nop - -one_cycle_and_hw_rei: - nop - nop - - hw_rei_stall - -#if icflush_on_tbix != 0 - - - ALIGN_BLOCK - -//+ -// Common Icache flush and ITB invalidate single routine. -// ITBIS and hw_rei_stall must be in same octaword. -// r17 - has address to invalidate -// -//- -PAL_IC_FLUSH_AND_TBISI: - nop - mtpr r31, ev5__ic_flush_ctl // Icache flush - E1 - nop - nop - -// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20) - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 10 - - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 20 - - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 30 - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop // 40 - - - nop - nop - - nop - nop - - // A quadword is 64 bits, so an octaword is 128 bits -> 16 bytes -> 4 instructions - // 44 nops plus 4 instructions before it is 48 instructions. - // Since this routine started on a 32-byte (8 instruction) boundary, - // the following 2 instructions will be in the same octword as required. -// ALIGN_BRANCH - mtpr r17, ev5__itb_is // Flush ITB - hw_rei_stall - -#endif - - ALIGN_BLOCK -//+ -//osfpal_calpal_opcdec -// Here for all opcdec CALL_PALs -// -// Build stack frame -// a0 <- code -// a1 <- unpred -// a2 <- unpred -// vector via entIF -// -//- - -osfpal_calpal_opcdec: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - mfpr r14, exc_addr // get pc - nop - - bis r11, r31, r12 // Save PS for stack write - bge r25, osfpal_calpal_opcdec_10_ // no stack swap needed if cm=kern - - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r11 // Set new PS - mfpr r30, pt_ksp - -osfpal_calpal_opcdec_10_: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - nop - - stq r16, osfsf_a0(sp) // save regs - bis r31, osf_a0_opdec, r16 // set a0 - - stq r18, osfsf_a2(sp) // a2 - mfpr r13, pt_entif // get entry point - - stq r12, osfsf_ps(sp) // save old ps - stq r17, osfsf_a1(sp) // a1 - - stq r14, osfsf_pc(sp) // save pc - nop - - stq r29, osfsf_gp(sp) // save gp - mtpr r13, exc_addr // load exc_addr with entIF - // 1 cycle to hw_rei - - mfpr r29, pt_kgp // get the kgp - - - hw_rei_spe // done - - - - - -//+ -//pal_update_pcb -// Update the PCB with the current SP, AST, and CC info -// -// r0 - return linkage -//- - ALIGN_BLOCK - -pal_update_pcb: - mfpr r12, pt_pcbb // get pcbb - and r11, osfps_m_mode, r25 // get mode - beq r25, pal_update_pcb_10_ // in kern? no need to update user sp - mtpr r30, pt_usp // save user stack - stqp r30, osfpcb_q_usp(r12) // store usp - br r31, pal_update_pcb_20_ // join common -pal_update_pcb_10_: stqp r30, osfpcb_q_ksp(r12) // store ksp -pal_update_pcb_20_: rpcc r13 // get cyccounter - srl r13, 32, r14 // move offset - addl r13, r14, r14 // merge for new time - stlp r14, osfpcb_l_cc(r12) // save time - -//orig pvc_jsr updpcb, bsr=1, dest=1 - ret r31, (r0) - - - -#if remove_save_state == 0 - -// .sbttl "PAL_SAVE_STATE" -//+ -// -// Pal_save_state -// -// Function -// All chip state saved, all PT's, SR's FR's, IPR's -// -// -// Regs' on entry... -// -// R0 = halt code -// pt0 = r0 -// R1 = pointer to impure -// pt4 = r1 -// R3 = return addr -// pt5 = r3 -// -// register usage: -// r0 = halt_code -// r1 = addr of impure area -// r3 = return_address -// r4 = scratch -// -//- - - - ALIGN_BLOCK - .globl pal_save_state -pal_save_state: -// -// -// start of implementation independent save routine -// -// the impure area is larger than the addressibility of hw_ld and hw_st -// therefore, we need to play some games: The impure area -// is informally divided into the "machine independent" part and the -// "machine dependent" part. The state that will be saved in the -// "machine independent" part are gpr's, fpr's, hlt, flag, mchkflag (use (un)fix_impure_gpr macros). -// All others will be in the "machine dependent" part (use (un)fix_impure_ipr macros). -// The impure pointer will need to be adjusted by a different offset for each. The store/restore_reg -// macros will automagically adjust the offset correctly. -// - -// The distributed code is commented out and followed by corresponding SRC code. -// Beware: SAVE_IPR and RESTORE_IPR blow away r0(v0) - -//orig fix_impure_gpr r1 // adjust impure area pointer for stores to "gpr" part of impure area - lda r1, 0x200(r1) // Point to center of CPU segment -//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area flag - SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the valid flag -//orig store_reg1 hlt, r0, r1, ipr=1 - SAVE_GPR(r0,CNS_Q_HALT,r1) // Save the halt code - - mfpr r0, pt0 // get r0 back //orig -//orig store_reg1 0, r0, r1 // save r0 - SAVE_GPR(r0,CNS_Q_GPR+0x00,r1) // Save r0 - - mfpr r0, pt4 // get r1 back //orig -//orig store_reg1 1, r0, r1 // save r1 - SAVE_GPR(r0,CNS_Q_GPR+0x08,r1) // Save r1 - -//orig store_reg 2 // save r2 - SAVE_GPR(r2,CNS_Q_GPR+0x10,r1) // Save r2 - - mfpr r0, pt5 // get r3 back //orig -//orig store_reg1 3, r0, r1 // save r3 - SAVE_GPR(r0,CNS_Q_GPR+0x18,r1) // Save r3 - - // reason code has been saved - // r0 has been saved - // r1 has been saved - // r2 has been saved - // r3 has been saved - // pt0, pt4, pt5 have been lost - - // - // Get out of shadow mode - // - - mfpr r2, icsr // Get icsr //orig -//orig ldah r0, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location - ldah r0, (1<<(icsr_v_sde-16))(r31) - bic r2, r0, r0 // ICSR with SDE clear //orig - mtpr r0, icsr // Turn off SDE //orig - - mfpr r31, pt0 // SDE bubble cycle 1 //orig - mfpr r31, pt0 // SDE bubble cycle 2 //orig - mfpr r31, pt0 // SDE bubble cycle 3 //orig - nop //orig - - - // save integer regs R4-r31 -//orig #define t 4 -//orig .repeat 28 -//orig store_reg \t -//orig #define t t + 1 -//orig .endr - SAVE_GPR(r4,CNS_Q_GPR+0x20,r1) - SAVE_GPR(r5,CNS_Q_GPR+0x28,r1) - SAVE_GPR(r6,CNS_Q_GPR+0x30,r1) - SAVE_GPR(r7,CNS_Q_GPR+0x38,r1) - SAVE_GPR(r8,CNS_Q_GPR+0x40,r1) - SAVE_GPR(r9,CNS_Q_GPR+0x48,r1) - SAVE_GPR(r10,CNS_Q_GPR+0x50,r1) - SAVE_GPR(r11,CNS_Q_GPR+0x58,r1) - SAVE_GPR(r12,CNS_Q_GPR+0x60,r1) - SAVE_GPR(r13,CNS_Q_GPR+0x68,r1) - SAVE_GPR(r14,CNS_Q_GPR+0x70,r1) - SAVE_GPR(r15,CNS_Q_GPR+0x78,r1) - SAVE_GPR(r16,CNS_Q_GPR+0x80,r1) - SAVE_GPR(r17,CNS_Q_GPR+0x88,r1) - SAVE_GPR(r18,CNS_Q_GPR+0x90,r1) - SAVE_GPR(r19,CNS_Q_GPR+0x98,r1) - SAVE_GPR(r20,CNS_Q_GPR+0xA0,r1) - SAVE_GPR(r21,CNS_Q_GPR+0xA8,r1) - SAVE_GPR(r22,CNS_Q_GPR+0xB0,r1) - SAVE_GPR(r23,CNS_Q_GPR+0xB8,r1) - SAVE_GPR(r24,CNS_Q_GPR+0xC0,r1) - SAVE_GPR(r25,CNS_Q_GPR+0xC8,r1) - SAVE_GPR(r26,CNS_Q_GPR+0xD0,r1) - SAVE_GPR(r27,CNS_Q_GPR+0xD8,r1) - SAVE_GPR(r28,CNS_Q_GPR+0xE0,r1) - SAVE_GPR(r29,CNS_Q_GPR+0xE8,r1) - SAVE_GPR(r30,CNS_Q_GPR+0xF0,r1) - SAVE_GPR(r31,CNS_Q_GPR+0xF8,r1) - - // save all paltemp regs except pt0 - -//orig unfix_impure_gpr r1 // adjust impure area pointer for gpr stores -//orig fix_impure_ipr r1 // adjust impure area pointer for pt stores -//orig #define t 1 -//orig .repeat 23 -//orig store_reg \t , pal=1 -//orig #define t t + 1 -//orig .endr - - lda r1, -0x200(r1) // Restore the impure base address. - lda r1, CNS_Q_IPR(r1) // Point to the base of IPR area. - SAVE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle - SAVE_IPR(pt1,CNS_Q_PT+0x08,r1) - SAVE_IPR(pt2,CNS_Q_PT+0x10,r1) - SAVE_IPR(pt3,CNS_Q_PT+0x18,r1) - SAVE_IPR(pt4,CNS_Q_PT+0x20,r1) - SAVE_IPR(pt5,CNS_Q_PT+0x28,r1) - SAVE_IPR(pt6,CNS_Q_PT+0x30,r1) - SAVE_IPR(pt7,CNS_Q_PT+0x38,r1) - SAVE_IPR(pt8,CNS_Q_PT+0x40,r1) - SAVE_IPR(pt9,CNS_Q_PT+0x48,r1) - SAVE_IPR(pt10,CNS_Q_PT+0x50,r1) - SAVE_IPR(pt11,CNS_Q_PT+0x58,r1) - SAVE_IPR(pt12,CNS_Q_PT+0x60,r1) - SAVE_IPR(pt13,CNS_Q_PT+0x68,r1) - SAVE_IPR(pt14,CNS_Q_PT+0x70,r1) - SAVE_IPR(pt15,CNS_Q_PT+0x78,r1) - SAVE_IPR(pt16,CNS_Q_PT+0x80,r1) - SAVE_IPR(pt17,CNS_Q_PT+0x88,r1) - SAVE_IPR(pt18,CNS_Q_PT+0x90,r1) - SAVE_IPR(pt19,CNS_Q_PT+0x98,r1) - SAVE_IPR(pt20,CNS_Q_PT+0xA0,r1) - SAVE_IPR(pt21,CNS_Q_PT+0xA8,r1) - SAVE_IPR(pt22,CNS_Q_PT+0xB0,r1) - SAVE_IPR(pt23,CNS_Q_PT+0xB8,r1) - - // Restore shadow mode - mfpr r31, pt0 // pad write to icsr out of shadow of store (trap does not abort write) //orig - mfpr r31, pt0 //orig - mtpr r2, icsr // Restore original ICSR //orig - - mfpr r31, pt0 // SDE bubble cycle 1 //orig - mfpr r31, pt0 // SDE bubble cycle 2 //orig - mfpr r31, pt0 // SDE bubble cycle 3 //orig - nop //orig - - // save all integer shadow regs - -//orig #define t 8 -//orig .repeat 7 -//orig store_reg \t, shadow=1 -//orig #define t t + 1 -//orig .endr -//orig store_reg 25, shadow=1 - - SAVE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code - SAVE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1) - SAVE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1) - SAVE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1) - SAVE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1) - SAVE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1) - SAVE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1) - SAVE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1) - -//orig store_reg exc_addr, ipr=1 // save ipr -//orig store_reg pal_base, ipr=1 // save ipr -//orig store_reg mm_stat, ipr=1 // save ipr -//orig store_reg va, ipr=1 // save ipr -//orig store_reg icsr, ipr=1 // save ipr -//orig store_reg ipl, ipr=1 // save ipr -//orig store_reg ps, ipr=1 // save ipr -//orig store_reg itb_asn, ipr=1 // save ipr -//orig store_reg aster, ipr=1 // save ipr -//orig store_reg astrr, ipr=1 // save ipr -//orig store_reg sirr, ipr=1 // save ipr -//orig store_reg isr, ipr=1 // save ipr -//orig store_reg ivptbr, ipr=1 // save ipr -//orig store_reg mcsr, ipr=1 // save ipr -//orig store_reg dc_mode, ipr=1 // save ipr - - SAVE_IPR(excAddr,CNS_Q_EXC_ADDR,r1) - SAVE_IPR(palBase,CNS_Q_PAL_BASE,r1) - SAVE_IPR(mmStat,CNS_Q_MM_STAT,r1) - SAVE_IPR(va,CNS_Q_VA,r1) - SAVE_IPR(icsr,CNS_Q_ICSR,r1) - SAVE_IPR(ipl,CNS_Q_IPL,r1) - SAVE_IPR(ips,CNS_Q_IPS,r1) - SAVE_IPR(itbAsn,CNS_Q_ITB_ASN,r1) - SAVE_IPR(aster,CNS_Q_ASTER,r1) - SAVE_IPR(astrr,CNS_Q_ASTRR,r1) - SAVE_IPR(sirr,CNS_Q_SIRR,r1) - SAVE_IPR(isr,CNS_Q_ISR,r1) - SAVE_IPR(iVptBr,CNS_Q_IVPTBR,r1) - SAVE_IPR(mcsr,CNS_Q_MCSR,r1) - SAVE_IPR(dcMode,CNS_Q_DC_MODE,r1) - -//orig pvc_violate 379 // mf maf_mode after a store ok (pvc doesn't distinguish ld from st) -//orig store_reg maf_mode, ipr=1 // save ipr -- no mbox instructions for -//orig // PVC violation applies only to -pvc$osf35$379: // loads. HW_ST ok here, so ignore - SAVE_IPR(mafMode,CNS_Q_MAF_MODE,r1) // MBOX INST->MF MAF_MODE IN 0,1,2 - - - //the following iprs are informational only -- will not be restored - -//orig store_reg icperr_stat, ipr=1 -//orig store_reg pmctr, ipr=1 -//orig store_reg intid, ipr=1 -//orig store_reg exc_sum, ipr=1 -//orig store_reg exc_mask, ipr=1 -//orig ldah r14, 0xfff0(r31) -//orig zap r14, 0xE0, r14 // Get Cbox IPR base -//orig nop // pad mf dcperr_stat out of shadow of last store -//orig nop -//orig nop -//orig store_reg dcperr_stat, ipr=1 - - SAVE_IPR(icPerr,CNS_Q_ICPERR_STAT,r1) - SAVE_IPR(PmCtr,CNS_Q_PM_CTR,r1) - SAVE_IPR(intId,CNS_Q_INT_ID,r1) - SAVE_IPR(excSum,CNS_Q_EXC_SUM,r1) - SAVE_IPR(excMask,CNS_Q_EXC_MASK,r1) - ldah r14, 0xFFF0(zero) - zap r14, 0xE0, r14 // Get base address of CBOX IPRs - NOP // Pad mfpr dcPerr out of shadow of - NOP // last store - NOP - SAVE_IPR(dcPerr,CNS_Q_DCPERR_STAT,r1) - - // read cbox ipr state - -//orig mb -//orig ldqp r2, ev5__sc_ctl(r14) -//orig ldqp r13, ld_lock(r14) -//orig ldqp r4, ev5__sc_addr(r14) -//orig ldqp r5, ev5__ei_addr(r14) -//orig ldqp r6, ev5__bc_tag_addr(r14) -//orig ldqp r7, ev5__fill_syn(r14) -//orig bis r5, r4, r31 -//orig bis r7, r6, r31 // make sure previous loads finish before reading stat registers which unlock them -//orig ldqp r8, ev5__sc_stat(r14) // unlocks sc_stat,sc_addr -//orig ldqp r9, ev5__ei_stat(r14) // may unlock ei_*, bc_tag_addr, fill_syn -//orig ldqp r31, ev5__ei_stat(r14) // ensures it is really unlocked -//orig mb - -#ifndef SIMOS - mb - ldq_p r2, scCtl(r14) - ldq_p r13, ldLock(r14) - ldq_p r4, scAddr(r14) - ldq_p r5, eiAddr(r14) - ldq_p r6, bcTagAddr(r14) - ldq_p r7, fillSyn(r14) - bis r5, r4, zero // Make sure all loads complete before - bis r7, r6, zero // reading registers that unlock them. - ldq_p r8, scStat(r14) // Unlocks scAddr. - ldq_p r9, eiStat(r14) // Unlocks eiAddr, bcTagAddr, fillSyn. - ldq_p zero, eiStat(r14) // Make sure it is really unlocked. - mb -#endif -//orig // save cbox ipr state -//orig store_reg1 sc_ctl, r2, r1, ipr=1 -//orig store_reg1 ld_lock, r13, r1, ipr=1 -//orig store_reg1 sc_addr, r4, r1, ipr=1 -//orig store_reg1 ei_addr, r5, r1, ipr=1 -//orig store_reg1 bc_tag_addr, r6, r1, ipr=1 -//orig store_reg1 fill_syn, r7, r1, ipr=1 -//orig store_reg1 sc_stat, r8, r1, ipr=1 -//orig store_reg1 ei_stat, r9, r1, ipr=1 -//orig //bc_config? sl_rcv? - - SAVE_SHADOW(r2,CNS_Q_SC_CTL,r1); - SAVE_SHADOW(r13,CNS_Q_LD_LOCK,r1); - SAVE_SHADOW(r4,CNS_Q_SC_ADDR,r1); - SAVE_SHADOW(r5,CNS_Q_EI_ADDR,r1); - SAVE_SHADOW(r6,CNS_Q_BC_TAG_ADDR,r1); - SAVE_SHADOW(r7,CNS_Q_FILL_SYN,r1); - SAVE_SHADOW(r8,CNS_Q_SC_STAT,r1); - SAVE_SHADOW(r9,CNS_Q_EI_STAT,r1); - -// restore impure base //orig -//orig unfix_impure_ipr r1 - lda r1, -CNS_Q_IPR(r1) - -// save all floating regs //orig - mfpr r0, icsr // get icsr //orig - or r31, 1, r2 // get a one //orig -//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot //orig - sll r2, icsr_v_fpe, r2 // Shift it into ICSR<FPE> position - or r2, r0, r0 // set FEN on //orig - mtpr r0, icsr // write to icsr, enabling FEN //orig - -// map the save area virtually -// orig mtpr r31, dtb_ia // clear the dtb -// orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA -// orig sll r0, 32, r0 // shift to PFN field -// orig lda r2, 0xff(r31) // all read enable and write enable bits set -// orig sll r2, 8, r2 // move to PTE location -// orig addq r0, r2, r0 // combine with PFN -// orig mtpr r0, dtb_pte // Load PTE and set TB valid bit -// orig mtpr r1, dtb_tag // write TB tag - - mtpr r31, dtbIa // Clear all DTB entries - srl r1, va_s_off, r0 // Clean off byte-within-page offset - sll r0, pte_v_pfn, r0 // Shift to form PFN - lda r0, pte_m_prot(r0) // Set all read/write enable bits - mtpr r0, dtbPte // Load the PTE and set valid - mtpr r1, dtbTag // Write the PTE and tag into the DTB - - -//orig // map the next page too - in case the impure area crosses a page boundary -//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page -//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA -//orig sll r0, 32, r0 // shift to PFN field -//orig lda r2, 0xff(r31) // all read enable and write enable bits set -//orig sll r2, 8, r2 // move to PTE location -//orig addq r0, r2, r0 // combine with PFN -//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit -//orig mtpr r4, dtb_tag // write TB tag - - lda r4, (1<<va_s_off)(r1) // Generate address for next page - srl r4, va_s_off, r0 // Clean off byte-within-page offset - sll r0, pte_v_pfn, r0 // Shift to form PFN - lda r0, pte_m_prot(r0) // Set all read/write enable bits - mtpr r0, dtbPte // Load the PTE and set valid - mtpr r4, dtbTag // Write the PTE and tag into the DTB - - sll r31, 0, r31 // stall cycle 1 // orig - sll r31, 0, r31 // stall cycle 2 // orig - sll r31, 0, r31 // stall cycle 3 // orig - nop // orig - -//orig // add offset for saving fpr regs -//orig fix_impure_gpr r1 - - lda r1, 0x200(r1) // Point to center of CPU segment - -// now save the regs - F0-F31 - -//orig #define t 0 -//orig .repeat 32 -//orig store_reg \t , fpu=1 -//orig #define t t + 1 -//orig .endr - - mf_fpcr f0 // original - - SAVE_FPR(f0,CNS_Q_FPR+0x00,r1) - SAVE_FPR(f1,CNS_Q_FPR+0x08,r1) - SAVE_FPR(f2,CNS_Q_FPR+0x10,r1) - SAVE_FPR(f3,CNS_Q_FPR+0x18,r1) - SAVE_FPR(f4,CNS_Q_FPR+0x20,r1) - SAVE_FPR(f5,CNS_Q_FPR+0x28,r1) - SAVE_FPR(f6,CNS_Q_FPR+0x30,r1) - SAVE_FPR(f7,CNS_Q_FPR+0x38,r1) - SAVE_FPR(f8,CNS_Q_FPR+0x40,r1) - SAVE_FPR(f9,CNS_Q_FPR+0x48,r1) - SAVE_FPR(f10,CNS_Q_FPR+0x50,r1) - SAVE_FPR(f11,CNS_Q_FPR+0x58,r1) - SAVE_FPR(f12,CNS_Q_FPR+0x60,r1) - SAVE_FPR(f13,CNS_Q_FPR+0x68,r1) - SAVE_FPR(f14,CNS_Q_FPR+0x70,r1) - SAVE_FPR(f15,CNS_Q_FPR+0x78,r1) - SAVE_FPR(f16,CNS_Q_FPR+0x80,r1) - SAVE_FPR(f17,CNS_Q_FPR+0x88,r1) - SAVE_FPR(f18,CNS_Q_FPR+0x90,r1) - SAVE_FPR(f19,CNS_Q_FPR+0x98,r1) - SAVE_FPR(f20,CNS_Q_FPR+0xA0,r1) - SAVE_FPR(f21,CNS_Q_FPR+0xA8,r1) - SAVE_FPR(f22,CNS_Q_FPR+0xB0,r1) - SAVE_FPR(f23,CNS_Q_FPR+0xB8,r1) - SAVE_FPR(f24,CNS_Q_FPR+0xC0,r1) - SAVE_FPR(f25,CNS_Q_FPR+0xC8,r1) - SAVE_FPR(f26,CNS_Q_FPR+0xD0,r1) - SAVE_FPR(f27,CNS_Q_FPR+0xD8,r1) - SAVE_FPR(f28,CNS_Q_FPR+0xE0,r1) - SAVE_FPR(f29,CNS_Q_FPR+0xE8,r1) - SAVE_FPR(f30,CNS_Q_FPR+0xF0,r1) - SAVE_FPR(f31,CNS_Q_FPR+0xF8,r1) - -//orig //switch impure offset from gpr to ipr--- -//orig unfix_impure_gpr r1 -//orig fix_impure_ipr r1 -//orig store_reg1 fpcsr, f0, r1, fpcsr=1 - - SAVE_FPR(f0,CNS_Q_FPCSR,r1) // fpcsr loaded above into f0 -- can it reach// pb - lda r1, -0x200(r1) // Restore the impure base address - -//orig // and back to gpr --- -//orig unfix_impure_ipr r1 -//orig fix_impure_gpr r1 - -//orig lda r0, cns_mchksize(r31) // get size of mchk area -//orig store_reg1 mchkflag, r0, r1, ipr=1 -//orig mb - - lda r1, CNS_Q_IPR(r1) // Point to base of IPR area again - // save this using the IPR base (it is closer) not the GRP base as they used...pb - lda r0, MACHINE_CHECK_SIZE(r31) // get size of mchk area - SAVE_SHADOW(r0,CNS_Q_MCHK,r1); - mb - -//orig or r31, 1, r0 // get a one -//orig store_reg1 flag, r0, r1, ipr=1 // set dump area flag -//orig mb - - lda r1, -CNS_Q_IPR(r1) // back to the base - lda r1, 0x200(r1) // Point to center of CPU segment - or r31, 1, r0 // get a one - SAVE_GPR(r0,CNS_Q_FLAG,r1) // // set dump area valid flag - mb - -//orig // restore impure area base -//orig unfix_impure_gpr r1 - lda r1, -0x200(r1) // Point to center of CPU segment - - mtpr r31, dtb_ia // clear the dtb //orig - mtpr r31, itb_ia // clear the itb //orig - -//orig pvc_jsr savsta, bsr=1, dest=1 - ret r31, (r3) // and back we go -#endif - - -#if remove_restore_state == 0 - - -// .sbttl "PAL_RESTORE_STATE" -//+ -// -// Pal_restore_state -// -// -// register usage: -// r1 = addr of impure area -// r3 = return_address -// all other regs are scratchable, as they are about to -// be reloaded from ram. -// -// Function: -// All chip state restored, all SRs, FRs, PTs, IPRs -// *** except R1, R3, PT0, PT4, PT5 *** -// -//- - ALIGN_BLOCK -pal_restore_state: - -//need to restore sc_ctl,bc_ctl,bc_config??? if so, need to figure out a safe way to do so. - -//orig // map the console io area virtually -//orig mtpr r31, dtb_ia // clear the dtb -//orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA -//orig sll r0, 32, r0 // shift to PFN field -//orig lda r2, 0xff(r31) // all read enable and write enable bits set -//orig sll r2, 8, r2 // move to PTE location -//orig addq r0, r2, r0 // combine with PFN -//orig -//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit -//orig mtpr r1, dtb_tag // write TB tag -//orig - - mtpr r31, dtbIa // Clear all DTB entries - srl r1, va_s_off, r0 // Clean off byte-within-page offset - sll r0, pte_v_pfn, r0 // Shift to form PFN - lda r0, pte_m_prot(r0) // Set all read/write enable bits - mtpr r0, dtbPte // Load the PTE and set valid - mtpr r1, dtbTag // Write the PTE and tag into the DTB - - -//orig // map the next page too, in case impure area crosses page boundary -//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page -//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA -//orig sll r0, 32, r0 // shift to PFN field -//orig lda r2, 0xff(r31) // all read enable and write enable bits set -//orig sll r2, 8, r2 // move to PTE location -//orig addq r0, r2, r0 // combine with PFN -//orig -//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit -//orig mtpr r4, dtb_tag // write TB tag - no virtual mbox instruction for 3 cycles - - lda r4, (1<<VA_S_OFF)(r1) // Generate address for next page - srl r4, va_s_off, r0 // Clean off byte-within-page offset - sll r0, pte_v_pfn, r0 // Shift to form PFN - lda r0, pte_m_prot(r0) // Set all read/write enable bits - mtpr r0, dtbPte // Load the PTE and set valid - mtpr r4, dtbTag // Write the PTE and tag into the DTB - -//orig // save all floating regs -//orig mfpr r0, icsr // get icsr -//orig// assume ICSR_V_SDE gt <ICSR_V_FPE> // assertion checker -//orig or r31, <<1@<ICSR_V_SDE-ICSR_V_FPE>> ! 1>, r2 // set SDE and FPE -//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot -//orig or r2, r0, r0 // set FEN on -//orig mtpr r0, icsr // write to icsr, enabling FEN and SDE. 3 bubbles to floating instr. - - mfpr r0, icsr // Get current ICSR - bis zero, 1, r2 // Get a '1' - or r2, (1<<(icsr_v_sde-icsr_v_fpe)), r2 - sll r2, icsr_v_fpe, r2 // Shift bits into position - bis r2, r2, r0 // Set ICSR<SDE> and ICSR<FPE> - mtpr r0, icsr // Update the chip - - mfpr r31, pt0 // FPE bubble cycle 1 //orig - mfpr r31, pt0 // FPE bubble cycle 2 //orig - mfpr r31, pt0 // FPE bubble cycle 3 //orig - -//orig fix_impure_ipr r1 -//orig restore_reg1 fpcsr, f0, r1, fpcsr=1 -//orig mt_fpcr f0 -//orig -//orig unfix_impure_ipr r1 -//orig fix_impure_gpr r1 // adjust impure pointer offset for gpr access -//orig -//orig // restore all floating regs -//orig#define t 0 -//orig .repeat 32 -//orig restore_reg \t , fpu=1 -//orig#define t t + 1 -//orig .endr - - lda r1, 200(r1) // Point to base of IPR area again - RESTORE_FPR(f0,CNS_Q_FPCSR,r1) // can it reach?? pb - mt_fpcr f0 // original - - lda r1, 0x200(r1) // point to center of CPU segment - RESTORE_FPR(f0,CNS_Q_FPR+0x00,r1) - RESTORE_FPR(f1,CNS_Q_FPR+0x08,r1) - RESTORE_FPR(f2,CNS_Q_FPR+0x10,r1) - RESTORE_FPR(f3,CNS_Q_FPR+0x18,r1) - RESTORE_FPR(f4,CNS_Q_FPR+0x20,r1) - RESTORE_FPR(f5,CNS_Q_FPR+0x28,r1) - RESTORE_FPR(f6,CNS_Q_FPR+0x30,r1) - RESTORE_FPR(f7,CNS_Q_FPR+0x38,r1) - RESTORE_FPR(f8,CNS_Q_FPR+0x40,r1) - RESTORE_FPR(f9,CNS_Q_FPR+0x48,r1) - RESTORE_FPR(f10,CNS_Q_FPR+0x50,r1) - RESTORE_FPR(f11,CNS_Q_FPR+0x58,r1) - RESTORE_FPR(f12,CNS_Q_FPR+0x60,r1) - RESTORE_FPR(f13,CNS_Q_FPR+0x68,r1) - RESTORE_FPR(f14,CNS_Q_FPR+0x70,r1) - RESTORE_FPR(f15,CNS_Q_FPR+0x78,r1) - RESTORE_FPR(f16,CNS_Q_FPR+0x80,r1) - RESTORE_FPR(f17,CNS_Q_FPR+0x88,r1) - RESTORE_FPR(f18,CNS_Q_FPR+0x90,r1) - RESTORE_FPR(f19,CNS_Q_FPR+0x98,r1) - RESTORE_FPR(f20,CNS_Q_FPR+0xA0,r1) - RESTORE_FPR(f21,CNS_Q_FPR+0xA8,r1) - RESTORE_FPR(f22,CNS_Q_FPR+0xB0,r1) - RESTORE_FPR(f23,CNS_Q_FPR+0xB8,r1) - RESTORE_FPR(f24,CNS_Q_FPR+0xC0,r1) - RESTORE_FPR(f25,CNS_Q_FPR+0xC8,r1) - RESTORE_FPR(f26,CNS_Q_FPR+0xD0,r1) - RESTORE_FPR(f27,CNS_Q_FPR+0xD8,r1) - RESTORE_FPR(f28,CNS_Q_FPR+0xE0,r1) - RESTORE_FPR(f29,CNS_Q_FPR+0xE8,r1) - RESTORE_FPR(f30,CNS_Q_FPR+0xF0,r1) - RESTORE_FPR(f31,CNS_Q_FPR+0xF8,r1) - -//orig // switch impure pointer from gpr to ipr area -- -//orig unfix_impure_gpr r1 -//orig fix_impure_ipr r1 -//orig -//orig // restore all pal regs -//orig#define t 1 -//orig .repeat 23 -//orig restore_reg \t , pal=1 -//orig#define t t + 1 -//orig .endr - - lda r1, -0x200(r1) // Restore base address of impure area. - lda r1, CNS_Q_IPR(r1) // Point to base of IPR area. - RESTORE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle - RESTORE_IPR(pt1,CNS_Q_PT+0x08,r1) - RESTORE_IPR(pt2,CNS_Q_PT+0x10,r1) - RESTORE_IPR(pt3,CNS_Q_PT+0x18,r1) - RESTORE_IPR(pt4,CNS_Q_PT+0x20,r1) - RESTORE_IPR(pt5,CNS_Q_PT+0x28,r1) - RESTORE_IPR(pt6,CNS_Q_PT+0x30,r1) - RESTORE_IPR(pt7,CNS_Q_PT+0x38,r1) - RESTORE_IPR(pt8,CNS_Q_PT+0x40,r1) - RESTORE_IPR(pt9,CNS_Q_PT+0x48,r1) - RESTORE_IPR(pt10,CNS_Q_PT+0x50,r1) - RESTORE_IPR(pt11,CNS_Q_PT+0x58,r1) - RESTORE_IPR(pt12,CNS_Q_PT+0x60,r1) - RESTORE_IPR(pt13,CNS_Q_PT+0x68,r1) - RESTORE_IPR(pt14,CNS_Q_PT+0x70,r1) - RESTORE_IPR(pt15,CNS_Q_PT+0x78,r1) - RESTORE_IPR(pt16,CNS_Q_PT+0x80,r1) - RESTORE_IPR(pt17,CNS_Q_PT+0x88,r1) - RESTORE_IPR(pt18,CNS_Q_PT+0x90,r1) - RESTORE_IPR(pt19,CNS_Q_PT+0x98,r1) - RESTORE_IPR(pt20,CNS_Q_PT+0xA0,r1) - RESTORE_IPR(pt21,CNS_Q_PT+0xA8,r1) - RESTORE_IPR(pt22,CNS_Q_PT+0xB0,r1) - RESTORE_IPR(pt23,CNS_Q_PT+0xB8,r1) - - -//orig restore_reg exc_addr, ipr=1 // restore ipr -//orig restore_reg pal_base, ipr=1 // restore ipr -//orig restore_reg ipl, ipr=1 // restore ipr -//orig restore_reg ps, ipr=1 // restore ipr -//orig mtpr r0, dtb_cm // set current mode in mbox too -//orig restore_reg itb_asn, ipr=1 -//orig srl r0, itb_asn_v_asn, r0 -//orig sll r0, dtb_asn_v_asn, r0 -//orig mtpr r0, dtb_asn // set ASN in Mbox too -//orig restore_reg ivptbr, ipr=1 -//orig mtpr r0, mvptbr // use ivptbr value to restore mvptbr -//orig restore_reg mcsr, ipr=1 -//orig restore_reg aster, ipr=1 -//orig restore_reg astrr, ipr=1 -//orig restore_reg sirr, ipr=1 -//orig restore_reg maf_mode, ipr=1 // no mbox instruction for 3 cycles -//orig mfpr r31, pt0 // (may issue with mt maf_mode) -//orig mfpr r31, pt0 // bubble cycle 1 -//orig mfpr r31, pt0 // bubble cycle 2 -//orig mfpr r31, pt0 // bubble cycle 3 -//orig mfpr r31, pt0 // (may issue with following ld) - - // r0 gets the value of RESTORE_IPR in the macro and this code uses this side effect (gag) - RESTORE_IPR(excAddr,CNS_Q_EXC_ADDR,r1) - RESTORE_IPR(palBase,CNS_Q_PAL_BASE,r1) - RESTORE_IPR(ipl,CNS_Q_IPL,r1) - RESTORE_IPR(ips,CNS_Q_IPS,r1) - mtpr r0, dtbCm // Set Mbox current mode too. - RESTORE_IPR(itbAsn,CNS_Q_ITB_ASN,r1) - srl r0, 4, r0 - sll r0, 57, r0 - mtpr r0, dtbAsn // Set Mbox ASN too - RESTORE_IPR(iVptBr,CNS_Q_IVPTBR,r1) - mtpr r0, mVptBr // Set Mbox VptBr too - RESTORE_IPR(mcsr,CNS_Q_MCSR,r1) - RESTORE_IPR(aster,CNS_Q_ASTER,r1) - RESTORE_IPR(astrr,CNS_Q_ASTRR,r1) - RESTORE_IPR(sirr,CNS_Q_SIRR,r1) - RESTORE_IPR(mafMode,CNS_Q_MAF_MODE,r1) - STALL - STALL - STALL - STALL - STALL - - - // restore all integer shadow regs -//orig#define t 8 -//orig .repeat 7 -//orig restore_reg \t, shadow=1 -//orig#define t t + 1 -//orig .endr -//orig restore_reg 25, shadow=1 -//orig restore_reg dc_mode, ipr=1 // no mbox instructions for 4 cycles - - RESTORE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code - RESTORE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1) - RESTORE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1) - RESTORE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1) - RESTORE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1) - RESTORE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1) - RESTORE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1) - RESTORE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1) - RESTORE_IPR(dcMode,CNS_Q_DC_MODE,r1) - - // - // Get out of shadow mode - // - - mfpr r31, pt0 // pad last load to icsr write (in case of replay, icsr will be written anyway) //orig - mfpr r31, pt0 // "" //orig - mfpr r0, icsr // Get icsr //orig -//orig ldah r2, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location - ldah r2, (1<<(ICSR_V_SDE-16))(r31) // Get a one in SHADOW_ENABLE bit location //orig - bic r0, r2, r2 // ICSR with SDE clear //orig - mtpr r2, icsr // Turn off SDE - no palshadow rd/wr for 3 bubble cycles //orig - - mfpr r31, pt0 // SDE bubble cycle 1 //orig - mfpr r31, pt0 // SDE bubble cycle 2 //orig - mfpr r31, pt0 // SDE bubble cycle 3 //orig - nop //orig - -//orig // switch impure pointer from ipr to gpr area -- -//orig unfix_impure_ipr r1 -//orig fix_impure_gpr r1 -//orig // restore all integer regs -//orig#define t 4 -//orig .repeat 28 -//orig restore_reg \t -//orig#define t t + 1 -//orig .endr - -// Restore GPRs (r0, r2 are restored later, r1 and r3 are trashed) ... - - lda r1, -CNS_Q_IPR(r1) // Restore base address of impure area - lda r1, 0x200(r1) // Point to center of CPU segment - - RESTORE_GPR(r4,CNS_Q_GPR+0x20,r1) - RESTORE_GPR(r5,CNS_Q_GPR+0x28,r1) - RESTORE_GPR(r6,CNS_Q_GPR+0x30,r1) - RESTORE_GPR(r7,CNS_Q_GPR+0x38,r1) - RESTORE_GPR(r8,CNS_Q_GPR+0x40,r1) - RESTORE_GPR(r9,CNS_Q_GPR+0x48,r1) - RESTORE_GPR(r10,CNS_Q_GPR+0x50,r1) - RESTORE_GPR(r11,CNS_Q_GPR+0x58,r1) - RESTORE_GPR(r12,CNS_Q_GPR+0x60,r1) - RESTORE_GPR(r13,CNS_Q_GPR+0x68,r1) - RESTORE_GPR(r14,CNS_Q_GPR+0x70,r1) - RESTORE_GPR(r15,CNS_Q_GPR+0x78,r1) - RESTORE_GPR(r16,CNS_Q_GPR+0x80,r1) - RESTORE_GPR(r17,CNS_Q_GPR+0x88,r1) - RESTORE_GPR(r18,CNS_Q_GPR+0x90,r1) - RESTORE_GPR(r19,CNS_Q_GPR+0x98,r1) - RESTORE_GPR(r20,CNS_Q_GPR+0xA0,r1) - RESTORE_GPR(r21,CNS_Q_GPR+0xA8,r1) - RESTORE_GPR(r22,CNS_Q_GPR+0xB0,r1) - RESTORE_GPR(r23,CNS_Q_GPR+0xB8,r1) - RESTORE_GPR(r24,CNS_Q_GPR+0xC0,r1) - RESTORE_GPR(r25,CNS_Q_GPR+0xC8,r1) - RESTORE_GPR(r26,CNS_Q_GPR+0xD0,r1) - RESTORE_GPR(r27,CNS_Q_GPR+0xD8,r1) - RESTORE_GPR(r28,CNS_Q_GPR+0xE0,r1) - RESTORE_GPR(r29,CNS_Q_GPR+0xE8,r1) - RESTORE_GPR(r30,CNS_Q_GPR+0xF0,r1) - RESTORE_GPR(r31,CNS_Q_GPR+0xF8,r1) - -//orig // switch impure pointer from gpr to ipr area -- -//orig unfix_impure_gpr r1 -//orig fix_impure_ipr r1 -//orig restore_reg icsr, ipr=1 // restore original icsr- 4 bubbles to hw_rei - - lda t0, -0x200(t0) // Restore base address of impure area. - lda t0, CNS_Q_IPR(t0) // Point to base of IPR area again. - RESTORE_IPR(icsr,CNS_Q_ICSR,r1) - -//orig // and back again -- -//orig unfix_impure_ipr r1 -//orig fix_impure_gpr r1 -//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area valid flag -//orig mb - - lda t0, -CNS_Q_IPR(t0) // Back to base of impure area again, - lda t0, 0x200(t0) // and back to center of CPU segment - SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the dump area valid flag - mb - -//orig // and back we go -//orig// restore_reg 3 -//orig restore_reg 2 -//orig// restore_reg 1 -//orig restore_reg 0 -//orig // restore impure area base -//orig unfix_impure_gpr r1 - - RESTORE_GPR(r2,CNS_Q_GPR+0x10,r1) - RESTORE_GPR(r0,CNS_Q_GPR+0x00,r1) - lda r1, -0x200(r1) // Restore impure base address - - mfpr r31, pt0 // stall for ldqp above //orig - - mtpr r31, dtb_ia // clear the tb //orig - mtpr r31, itb_ia // clear the itb //orig - -//orig pvc_jsr rststa, bsr=1, dest=1 - ret r31, (r3) // back we go //orig -#endif - - -//+ -// pal_pal_bug_check -- code has found a bugcheck situation. -// Set things up and join common machine check flow. -// -// Input: -// r14 - exc_addr -// -// On exit: -// pt0 - saved r0 -// pt1 - saved r1 -// pt4 - saved r4 -// pt5 - saved r5 -// pt6 - saved r6 -// pt10 - saved exc_addr -// pt_misc<47:32> - mchk code -// pt_misc<31:16> - scb vector -// r14 - base of Cbox IPRs in IO space -// MCES<mchk> is set -//- - - ALIGN_BLOCK - .globl pal_pal_bug_check_from_int -pal_pal_bug_check_from_int: - DEBUGSTORE(0x79) -//simos DEBUG_EXC_ADDR() - DEBUGSTORE(0x20) -//simos bsr r25, put_hex - lda r25, mchk_c_bugcheck(r31) - addq r25, 1, r25 // set flag indicating we came from interrupt and stack is already pushed - br r31, pal_pal_mchk - nop - -pal_pal_bug_check: - lda r25, mchk_c_bugcheck(r31) - -pal_pal_mchk: - sll r25, 32, r25 // Move mchk code to position - - mtpr r14, pt10 // Stash exc_addr - mtpr r14, exc_addr - - mfpr r12, pt_misc // Get MCES and scratch - zap r12, 0x3c, r12 - - or r12, r25, r12 // Combine mchk code - lda r25, scb_v_procmchk(r31) // Get SCB vector - - sll r25, 16, r25 // Move SCBv to position - or r12, r25, r25 // Combine SCBv - - mtpr r0, pt0 // Stash for scratch - bis r25, mces_m_mchk, r25 // Set MCES<MCHK> bit - - mtpr r25, pt_misc // Save mchk code!scbv!whami!mces - ldah r14, 0xfff0(r31) - - mtpr r1, pt1 // Stash for scratch - zap r14, 0xE0, r14 // Get Cbox IPR base - - mtpr r4, pt4 - mtpr r5, pt5 - - mtpr r6, pt6 - blbs r12, sys_double_machine_check // MCHK halt if double machine check - - br r31, sys_mchk_collect_iprs // Join common machine check flow - -// align_to_call_pal_section // Align to address of first call_pal entry point - 2000 - -// .sbttl "HALT - PALcode for HALT instruction" - -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// GO to console code -// -//- - - .text 1 -// . = 0x2000 - CALL_PAL_PRIV(PAL_HALT_ENTRY) -call_pal_halt: -#if rax_mode == 0 - mfpr r31, pt0 // Pad exc_addr read - mfpr r31, pt0 - - mfpr r12, exc_addr // get PC - subq r12, 4, r12 // Point to the HALT - - mtpr r12, exc_addr - mtpr r0, pt0 - -//orig pvc_jsr updpcb, bsr=1 - bsr r0, pal_update_pcb // update the pcb - lda r0, hlt_c_sw_halt(r31) // set halt code to sw halt - br r31, sys_enter_console // enter the console - -#else // RAX mode - mb - mb - mtpr r9, ev5__dtb_asn // no Dstream virtual ref for next 3 cycles. - mtpr r9, ev5__itb_asn // E1. Update ITB ASN. No hw_rei for 5 cycles. - mtpr r8, exc_addr // no HW_REI for 1 cycle. - blbc r9, not_begin_case - mtpr r31, ev5__dtb_ia // clear DTB. No Dstream virtual ref for 2 cycles. - mtpr r31, ev5__itb_ia // clear ITB. - -not_begin_case: - nop - nop - - nop - nop // pad mt itb_asn ->hw_rei_stall - - hw_rei_stall -#endif - -// .sbttl "CFLUSH- PALcode for CFLUSH instruction" - -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// R16 - contains the PFN of the page to be flushed -// -// Function: -// Flush all Dstream caches of 1 entire page -// The CFLUSH routine is in the system specific module. -// -//- - - CALL_PAL_PRIV(PAL_CFLUSH_ENTRY) -Call_Pal_Cflush: - br r31, sys_cflush - -// .sbttl "DRAINA - PALcode for DRAINA instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// Implicit TRAPB performed by hardware. -// -// Function: -// Stall instruction issue until all prior instructions are guaranteed to -// complete without incurring aborts. For the EV5 implementation, this -// means waiting until all pending DREADS are returned. -// -//- - - CALL_PAL_PRIV(PAL_DRAINA_ENTRY) -Call_Pal_Draina: - ldah r14, 0x100(r31) // Init counter. Value? - nop - -DRAINA_LOOP: - subq r14, 1, r14 // Decrement counter - mfpr r13, ev5__maf_mode // Fetch status bit - - srl r13, maf_mode_v_dread_pending, r13 - ble r14, DRAINA_LOOP_TOO_LONG - - nop - blbs r13, DRAINA_LOOP // Wait until all DREADS clear - - hw_rei - -DRAINA_LOOP_TOO_LONG: - br r31, call_pal_halt - -// .sbttl "CALL_PAL OPCDECs" - - CALL_PAL_PRIV(0x0003) -CallPal_OpcDec03: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0004) -CallPal_OpcDec04: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0005) -CallPal_OpcDec05: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0006) -CallPal_OpcDec06: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0007) -CallPal_OpcDec07: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0008) -CallPal_OpcDec08: - br r31, osfpal_calpal_opcdec - -// .sbttl "CSERVE- PALcode for CSERVE instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// Various functions for private use of console software -// -// option selector in r0 -// arguments in r16.... -// The CSERVE routine is in the system specific module. -// -//- - - CALL_PAL_PRIV(PAL_CSERVE_ENTRY) -Call_Pal_Cserve: - br r31, sys_cserve - -// .sbttl "swppal - PALcode for swppal instruction" - -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// Vectored into via hardware PALcode instruction dispatch. -// R16 contains the new PAL identifier -// R17:R21 contain implementation-specific entry parameters -// -// R0 receives status: -// 0 success (PAL was switched) -// 1 unknown PAL variant -// 2 known PAL variant, but PAL not loaded -// -// -// Function: -// Swap control to another PAL. -//- - - CALL_PAL_PRIV(PAL_SWPPAL_ENTRY) -Call_Pal_Swppal: - cmpule r16, 255, r0 // see if a kibble was passed - cmoveq r16, r16, r0 // if r16=0 then a valid address (ECO 59) - - or r16, r31, r3 // set r3 incase this is a address - blbc r0, swppal_cont // nope, try it as an address - - cmpeq r16, 2, r0 // is it our friend OSF? - blbc r0, swppal_fail // nope, don't know this fellow - - br r2, CALL_PAL_SWPPAL_10_ // tis our buddy OSF - -// .global osfpal_hw_entry_reset -// .weak osfpal_hw_entry_reset -// .long <osfpal_hw_entry_reset-pal_start> -//orig halt // don't know how to get the address here - kludge ok, load pal at 0 - .long 0 // ?? hack upon hack...pb - -CALL_PAL_SWPPAL_10_: ldlp r3, 0(r2) // fetch target addr -// ble r3, swppal_fail ; if OSF not linked in say not loaded. - mfpr r2, pal_base // fetch pal base - - addq r2, r3, r3 // add pal base - lda r2, 0x3FFF(r31) // get pal base checker mask - - and r3, r2, r2 // any funky bits set? - cmpeq r2, 0, r0 // - - blbc r0, swppal_fail // return unknown if bad bit set. - br r31, swppal_cont - -// .sbttl "CALL_PAL OPCDECs" - - CALL_PAL_PRIV(0x000B) -CallPal_OpcDec0B: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x000C) -CallPal_OpcDec0C: - br r31, osfpal_calpal_opcdec - -// .sbttl "wripir- PALcode for wripir instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// r16 = processor number to interrupt -// -// Function: -// IPIR <- R16 -// Handled in system-specific code -// -// Exit: -// interprocessor interrupt is recorded on the target processor -// and is initiated when the proper enabling conditions are present. -//- - - CALL_PAL_PRIV(PAL_WRIPIR_ENTRY) -Call_Pal_Wrpir: - br r31, sys_wripir - -// .sbttl "CALL_PAL OPCDECs" - - CALL_PAL_PRIV(0x000E) -CallPal_OpcDec0E: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x000F) -CallPal_OpcDec0F: - br r31, osfpal_calpal_opcdec - -// .sbttl "rdmces- PALcode for rdmces instruction" - -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// R0 <- ZEXT(MCES) -//- - - CALL_PAL_PRIV(PAL_RDMCES_ENTRY) -Call_Pal_Rdmces: - mfpr r0, pt_mces // Read from PALtemp - and r0, mces_m_all, r0 // Clear other bits - - hw_rei - -// .sbttl "wrmces- PALcode for wrmces instruction" - -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// If {R16<0> EQ 1} then MCES<0> <- 0 (MCHK) -// If {R16<1> EQ 1} then MCES<1> <- 0 (SCE) -// If {R16<2> EQ 1} then MCES<2> <- 0 (PCE) -// MCES<3> <- R16<3> (DPC) -// MCES<4> <- R16<4> (DSC) -// -//- - - CALL_PAL_PRIV(PAL_WRMCES_ENTRY) -Call_Pal_Wrmces: - and r16, ((1<<mces_v_mchk) | (1<<mces_v_sce) | (1<<mces_v_pce)), r13 // Isolate MCHK, SCE, PCE - mfpr r14, pt_mces // Get current value - - ornot r31, r13, r13 // Flip all the bits - and r16, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r17 - - and r14, r13, r1 // Update MCHK, SCE, PCE - bic r1, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r1 // Clear old DPC, DSC - - or r1, r17, r1 // Update DPC and DSC - mtpr r1, pt_mces // Write MCES back - -#if rawhide_system == 0 - nop // Pad to fix PT write->read restriction -#else - blbs r16, RAWHIDE_clear_mchk_lock // Clear logout from lock -#endif - - nop - hw_rei - - - -// .sbttl "CALL_PAL OPCDECs" - - CALL_PAL_PRIV(0x0012) -CallPal_OpcDec12: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0013) -CallPal_OpcDec13: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0014) -CallPal_OpcDec14: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0015) -CallPal_OpcDec15: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0016) -CallPal_OpcDec16: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0017) -CallPal_OpcDec17: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0018) -CallPal_OpcDec18: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0019) -CallPal_OpcDec19: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x001A) -CallPal_OpcDec1A: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x001B) -CallPal_OpcDec1B: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x001C) -CallPal_OpcDec1C: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x001D) -CallPal_OpcDec1D: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x001E) -CallPal_OpcDec1E: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x001F) -CallPal_OpcDec1F: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0020) -CallPal_OpcDec20: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0021) -CallPal_OpcDec21: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0022) -CallPal_OpcDec22: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0023) -CallPal_OpcDec23: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0024) -CallPal_OpcDec24: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0025) -CallPal_OpcDec25: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0026) -CallPal_OpcDec26: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0027) -CallPal_OpcDec27: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0028) -CallPal_OpcDec28: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x0029) -CallPal_OpcDec29: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x002A) -CallPal_OpcDec2A: - br r31, osfpal_calpal_opcdec - -// .sbttl "wrfen - PALcode for wrfen instruction" - -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// a0<0> -> ICSR<FPE> -// Store new FEN in PCB -// Final value of t0 (r1), t8..t10 (r22..r24) and a0 (r16) are UNPREDICTABLE -// -// Issue: What about pending FP loads when FEN goes from on->off???? -//- - - CALL_PAL_PRIV(PAL_WRFEN_ENTRY) -Call_Pal_Wrfen: - or r31, 1, r13 // Get a one - mfpr r1, ev5__icsr // Get current FPE - - sll r13, icsr_v_fpe, r13 // shift 1 to icsr<fpe> spot, e0 - and r16, 1, r16 // clean new fen - - sll r16, icsr_v_fpe, r12 // shift new fen to correct bit position - bic r1, r13, r1 // zero icsr<fpe> - - or r1, r12, r1 // Or new FEN into ICSR - mfpr r12, pt_pcbb // Get PCBB - E1 - - mtpr r1, ev5__icsr // write new ICSR. 3 Bubble cycles to HW_REI - stlp r16, osfpcb_q_fen(r12) // Store FEN in PCB. - - mfpr r31, pt0 // Pad ICSR<FPE> write. - mfpr r31, pt0 - - mfpr r31, pt0 -// pvc_violate 225 // cuz PVC can't distinguish which bits changed - hw_rei - - - CALL_PAL_PRIV(0x002C) -CallPal_OpcDec2C: - br r31, osfpal_calpal_opcdec - -// .sbttl "wrvptpr - PALcode for wrvptpr instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// vptptr <- a0 (r16) -//- - - CALL_PAL_PRIV(PAL_WRVPTPTR_ENTRY) -Call_Pal_Wrvptptr: - mtpr r16, ev5__mvptbr // Load Mbox copy - mtpr r16, ev5__ivptbr // Load Ibox copy - nop // Pad IPR write - nop - hw_rei - - CALL_PAL_PRIV(0x002E) -CallPal_OpcDec2E: - br r31, osfpal_calpal_opcdec - - CALL_PAL_PRIV(0x002F) -CallPal_OpcDec2F: - br r31, osfpal_calpal_opcdec - -// .sbttl "swpctx- PALcode for swpctx instruction" - -//+ -// -// Entry: -// hardware dispatch via callPal instruction -// R16 -> new pcb -// -// Function: -// dynamic state moved to old pcb -// new state loaded from new pcb -// pcbb pointer set -// old pcbb returned in R0 -// -// Note: need to add perf monitor stuff -//- - - CALL_PAL_PRIV(PAL_SWPCTX_ENTRY) -Call_Pal_Swpctx: - rpcc r13 // get cyccounter - mfpr r0, pt_pcbb // get pcbb - - ldqp r22, osfpcb_q_fen(r16) // get new fen/pme - ldqp r23, osfpcb_l_cc(r16) // get new asn - - srl r13, 32, r25 // move offset - mfpr r24, pt_usp // get usp - - stqp r30, osfpcb_q_ksp(r0) // store old ksp -// pvc_violate 379 // stqp can't trap except replay. only problem if mf same ipr in same shadow. - mtpr r16, pt_pcbb // set new pcbb - - stqp r24, osfpcb_q_usp(r0) // store usp - addl r13, r25, r25 // merge for new time - - stlp r25, osfpcb_l_cc(r0) // save time - ldah r24, (1<<(icsr_v_fpe-16))(r31) - - and r22, 1, r12 // isolate fen - mfpr r25, icsr // get current icsr - - ev5_pass2 lda r24, (1<<icsr_v_pmp)(r24) - br r31, swpctx_cont - -// .sbttl "wrval - PALcode for wrval instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// sysvalue <- a0 (r16) -//- - - CALL_PAL_PRIV(PAL_WRVAL_ENTRY) -Call_Pal_Wrval: - nop - mtpr r16, pt_sysval // Pad paltemp write - nop - nop - hw_rei - - -// .sbttl "rdval - PALcode for rdval instruction" - -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// v0 (r0) <- sysvalue -//- - - CALL_PAL_PRIV(PAL_RDVAL_ENTRY) -Call_Pal_Rdval: - nop - mfpr r0, pt_sysval - nop - hw_rei - -// .sbttl "tbi - PALcode for tbi instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// TB invalidate -// r16/a0 = TBI type -// r17/a1 = Va for TBISx instructions -//- - - CALL_PAL_PRIV(PAL_TBI_ENTRY) -Call_Pal_Tbi: - addq r16, 2, r16 // change range to 0-2 - br r23, CALL_PAL_tbi_10_ // get our address - -CALL_PAL_tbi_10_: cmpult r16, 6, r22 // see if in range - lda r23, tbi_tbl-CALL_PAL_tbi_10_(r23) // set base to start of table - sll r16, 4, r16 // * 16 - blbc r22, CALL_PAL_tbi_30_ // go rei, if not - - addq r23, r16, r23 // addr of our code -//orig pvc_jsr tbi - jmp r31, (r23) // and go do it - -CALL_PAL_tbi_30_: - hw_rei - nop - -// .sbttl "wrent - PALcode for wrent instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// Update ent* in paltemps -// r16/a0 = Address of entry routine -// r17/a1 = Entry Number 0..5 -// -// r22, r23 trashed -//- - - CALL_PAL_PRIV(PAL_WRENT_ENTRY) -Call_Pal_Wrent: - cmpult r17, 6, r22 // see if in range - br r23, CALL_PAL_wrent_10_ // get our address - -CALL_PAL_wrent_10_: bic r16, 3, r16 // clean pc - blbc r22, CALL_PAL_wrent_30_ // go rei, if not in range - - lda r23, wrent_tbl-CALL_PAL_wrent_10_(r23) // set base to start of table - sll r17, 4, r17 // *16 - - addq r17, r23, r23 // Get address in table -//orig pvc_jsr wrent - jmp r31, (r23) // and go do it - -CALL_PAL_wrent_30_: - hw_rei // out of range, just return - -// .sbttl "swpipl - PALcode for swpipl instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// v0 (r0) <- PS<IPL> -// PS<IPL> <- a0<2:0> (r16) -// -// t8 (r22) is scratch -//- - - CALL_PAL_PRIV(PAL_SWPIPL_ENTRY) -Call_Pal_Swpipl: - and r16, osfps_m_ipl, r16 // clean New ipl - mfpr r22, pt_intmask // get int mask - - extbl r22, r16, r22 // get mask for this ipl - bis r11, r31, r0 // return old ipl - - bis r16, r31, r11 // set new ps - mtpr r22, ev5__ipl // set new mask - - mfpr r31, pt0 // pad ipl write - mfpr r31, pt0 // pad ipl write - - hw_rei // back - -// .sbttl "rdps - PALcode for rdps instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// v0 (r0) <- ps -//- - - CALL_PAL_PRIV(PAL_RDPS_ENTRY) -Call_Pal_Rdps: - bis r11, r31, r0 // Fetch PALshadow PS - nop // Must be 2 cycles long - hw_rei - -// .sbttl "wrkgp - PALcode for wrkgp instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// kgp <- a0 (r16) -//- - - CALL_PAL_PRIV(PAL_WRKGP_ENTRY) -Call_Pal_Wrkgp: - nop - mtpr r16, pt_kgp - nop // Pad for pt write->read restriction - nop - hw_rei - -// .sbttl "wrusp - PALcode for wrusp instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// usp <- a0 (r16) -//- - - CALL_PAL_PRIV(PAL_WRUSP_ENTRY) -Call_Pal_Wrusp: - nop - mtpr r16, pt_usp - nop // Pad possible pt write->read restriction - nop - hw_rei - -// .sbttl "wrperfmon - PALcode for wrperfmon instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// -// Function: -// Various control functions for the onchip performance counters -// -// option selector in r16 -// option argument in r17 -// returned status in r0 -// -// -// r16 = 0 Disable performance monitoring for one or more cpu's -// r17 = 0 disable no counters -// r17 = bitmask disable counters specified in bit mask (1=disable) -// -// r16 = 1 Enable performance monitoring for one or more cpu's -// r17 = 0 enable no counters -// r17 = bitmask enable counters specified in bit mask (1=enable) -// -// r16 = 2 Mux select for one or more cpu's -// r17 = Mux selection (cpu specific) -// <24:19> bc_ctl<pm_mux_sel> field (see spec) -// <31>,<7:4>,<3:0> pmctr <sel0>,<sel1>,<sel2> fields (see spec) -// -// r16 = 3 Options -// r17 = (cpu specific) -// <0> = 0 log all processes -// <0> = 1 log only selected processes -// <30,9,8> mode select - ku,kp,kk -// -// r16 = 4 Interrupt frequency select -// r17 = (cpu specific) indicates interrupt frequencies desired for each -// counter, with "zero interrupts" being an option -// frequency info in r17 bits as defined by PMCTR_CTL<FRQx> below -// -// r16 = 5 Read Counters -// r17 = na -// r0 = value (same format as ev5 pmctr) -// <0> = 0 Read failed -// <0> = 1 Read succeeded -// -// r16 = 6 Write Counters -// r17 = value (same format as ev5 pmctr; all counters written simultaneously) -// -// r16 = 7 Enable performance monitoring for one or more cpu's and reset counter to 0 -// r17 = 0 enable no counters -// r17 = bitmask enable & clear counters specified in bit mask (1=enable & clear) -// -//============================================================================= -//Assumptions: -//PMCTR_CTL: -// -// <15:14> CTL0 -- encoded frequency select and enable - CTR0 -// <13:12> CTL1 -- " - CTR1 -// <11:10> CTL2 -- " - CTR2 -// -// <9:8> FRQ0 -- frequency select for CTR0 (no enable info) -// <7:6> FRQ1 -- frequency select for CTR1 -// <5:4> FRQ2 -- frequency select for CTR2 -// -// <0> all vs. select processes (0=all,1=select) -// -// where -// FRQx<1:0> -// 0 1 disable interrupt -// 1 0 frequency = 65536 (16384 for ctr2) -// 1 1 frequency = 256 -// note: FRQx<1:0> = 00 will keep counters from ever being enabled. -// -//============================================================================= -// - CALL_PAL_PRIV(0x0039) -// unsupported in Hudson code .. pboyle Nov/95 -CALL_PAL_Wrperfmon: -#if perfmon_debug == 0 - // "real" performance monitoring code - cmpeq r16, 1, r0 // check for enable - bne r0, perfmon_en // br if requested to enable - - cmpeq r16, 2, r0 // check for mux ctl - bne r0, perfmon_muxctl // br if request to set mux controls - - cmpeq r16, 3, r0 // check for options - bne r0, perfmon_ctl // br if request to set options - - cmpeq r16, 4, r0 // check for interrupt frequency select - bne r0, perfmon_freq // br if request to change frequency select - - cmpeq r16, 5, r0 // check for counter read request - bne r0, perfmon_rd // br if request to read counters - - cmpeq r16, 6, r0 // check for counter write request - bne r0, perfmon_wr // br if request to write counters - - cmpeq r16, 7, r0 // check for counter clear/enable request - bne r0, perfmon_enclr // br if request to clear/enable counters - - beq r16, perfmon_dis // br if requested to disable (r16=0) - br r31, perfmon_unknown // br if unknown request -#else - - br r31, pal_perfmon_debug -#endif - -// .sbttl "rdusp - PALcode for rdusp instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// v0 (r0) <- usp -//- - - CALL_PAL_PRIV(PAL_RDUSP_ENTRY) -Call_Pal_Rdusp: - nop - mfpr r0, pt_usp - hw_rei - - - CALL_PAL_PRIV(0x003B) -CallPal_OpcDec3B: - br r31, osfpal_calpal_opcdec - -// .sbttl "whami - PALcode for whami instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// v0 (r0) <- whami -//- - CALL_PAL_PRIV(PAL_WHAMI_ENTRY) -Call_Pal_Whami: - nop - mfpr r0, pt_whami // Get Whami - extbl r0, 1, r0 // Isolate just whami bits - hw_rei - -// .sbttl "retsys - PALcode for retsys instruction" -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// 00(sp) contains return pc -// 08(sp) contains r29 -// -// Function: -// Return from system call. -// mode switched from kern to user. -// stacks swapped, ugp, upc restored. -// r23, r25 junked -//- - - CALL_PAL_PRIV(PAL_RETSYS_ENTRY) -Call_Pal_Retsys: - lda r25, osfsf_c_size(sp) // pop stack - bis r25, r31, r14 // touch r25 & r14 to stall mf exc_addr - - mfpr r14, exc_addr // save exc_addr in case of fault - ldq r23, osfsf_pc(sp) // get pc - - ldq r29, osfsf_gp(sp) // get gp - stl_c r31, -4(sp) // clear lock_flag - - lda r11, 1<<osfps_v_mode(r31)// new PS:mode=user - mfpr r30, pt_usp // get users stack - - bic r23, 3, r23 // clean return pc - mtpr r31, ev5__ipl // zero ibox IPL - 2 bubbles to hw_rei - - mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles - mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei - - mtpr r23, exc_addr // set return address - 1 bubble to hw_rei - mtpr r25, pt_ksp // save kern stack - - rc r31 // clear inter_flag -// pvc_violate 248 // possible hidden mt->mf pt violation ok in callpal - hw_rei_spe // and back - - - CALL_PAL_PRIV(0x003E) -CallPal_OpcDec3E: - br r31, osfpal_calpal_opcdec - -// .sbttl "rti - PALcode for rti instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// 00(sp) -> ps -// 08(sp) -> pc -// 16(sp) -> r29 (gp) -// 24(sp) -> r16 (a0) -// 32(sp) -> r17 (a1) -// 40(sp) -> r18 (a3) -//- - - CALL_PAL_PRIV(PAL_RTI_ENTRY) -#ifdef SIMOS - /* called once by platform_tlaser */ - .globl Call_Pal_Rti -#endif -Call_Pal_Rti: - lda r25, osfsf_c_size(sp) // get updated sp - bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr - - mfpr r14, exc_addr // save PC in case of fault - rc r31 // clear intr_flag - - ldq r12, -6*8(r25) // get ps - ldq r13, -5*8(r25) // pc - - ldq r18, -1*8(r25) // a2 - ldq r17, -2*8(r25) // a1 - - ldq r16, -3*8(r25) // a0 - ldq r29, -4*8(r25) // gp - - bic r13, 3, r13 // clean return pc - stl_c r31, -4(r25) // clear lock_flag - - and r12, osfps_m_mode, r11 // get mode - mtpr r13, exc_addr // set return address - - beq r11, rti_to_kern // br if rti to Kern - br r31, rti_to_user // out of call_pal space - - -// .sbttl "Start the Unprivileged CALL_PAL Entry Points" -// .sbttl "bpt- PALcode for bpt instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// Build stack frame -// a0 <- code -// a1 <- unpred -// a2 <- unpred -// vector via entIF -// -//- -// - .text 1 -// . = 0x3000 - CALL_PAL_UNPRIV(PAL_BPT_ENTRY) -Call_Pal_Bpt: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - bis r11, r31, r12 // Save PS for stack write - bge r25, CALL_PAL_bpt_10_ // no stack swap needed if cm=kern - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r11 // Set new PS - mfpr r30, pt_ksp - -CALL_PAL_bpt_10_: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - mfpr r14, exc_addr // get pc - - stq r16, osfsf_a0(sp) // save regs - bis r31, osf_a0_bpt, r16 // set a0 - - stq r17, osfsf_a1(sp) // a1 - br r31, bpt_bchk_common // out of call_pal space - - -// .sbttl "bugchk- PALcode for bugchk instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// Build stack frame -// a0 <- code -// a1 <- unpred -// a2 <- unpred -// vector via entIF -// -//- -// - CALL_PAL_UNPRIV(PAL_BUGCHK_ENTRY) -Call_Pal_Bugchk: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - bis r11, r31, r12 // Save PS for stack write - bge r25, CALL_PAL_bugchk_10_ // no stack swap needed if cm=kern - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r11 // Set new PS - mfpr r30, pt_ksp - -CALL_PAL_bugchk_10_: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - mfpr r14, exc_addr // get pc - - stq r16, osfsf_a0(sp) // save regs - bis r31, osf_a0_bugchk, r16 // set a0 - - stq r17, osfsf_a1(sp) // a1 - br r31, bpt_bchk_common // out of call_pal space - - - CALL_PAL_UNPRIV(0x0082) -CallPal_OpcDec82: - br r31, osfpal_calpal_opcdec - -// .sbttl "callsys - PALcode for callsys instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// Switch mode to kernel and build a callsys stack frame. -// sp = ksp -// gp = kgp -// t8 - t10 (r22-r24) trashed -// -//- -// - CALL_PAL_UNPRIV(PAL_CALLSYS_ENTRY) -Call_Pal_Callsys: - - and r11, osfps_m_mode, r24 // get mode - mfpr r22, pt_ksp // get ksp - - beq r24, sys_from_kern // sysCall from kern is not allowed - mfpr r12, pt_entsys // get address of callSys routine - -//+ -// from here on we know we are in user going to Kern -//- - mtpr r31, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles - mtpr r31, ev5__ps // set Ibox current mode - 2 bubble to hw_rei - - bis r31, r31, r11 // PS=0 (mode=kern) - mfpr r23, exc_addr // get pc - - mtpr r30, pt_usp // save usp - lda sp, 0-osfsf_c_size(r22)// set new sp - - stq r29, osfsf_gp(sp) // save user gp/r29 - stq r24, osfsf_ps(sp) // save ps - - stq r23, osfsf_pc(sp) // save pc - mtpr r12, exc_addr // set address - // 1 cycle to hw_rei - - mfpr r29, pt_kgp // get the kern gp/r29 - - hw_rei_spe // and off we go! - - - CALL_PAL_UNPRIV(0x0084) -CallPal_OpcDec84: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0085) -CallPal_OpcDec85: - br r31, osfpal_calpal_opcdec - -// .sbttl "imb - PALcode for imb instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// Flush the writebuffer and flush the Icache -// -//- -// - CALL_PAL_UNPRIV(PAL_IMB_ENTRY) -Call_Pal_Imb: - mb // Clear the writebuffer - mfpr r31, ev5__mcsr // Sync with clear - nop - nop - br r31, pal_ic_flush // Flush Icache - - -// .sbttl "CALL_PAL OPCDECs" - - CALL_PAL_UNPRIV(0x0087) -CallPal_OpcDec87: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0088) -CallPal_OpcDec88: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0089) -CallPal_OpcDec89: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x008A) -CallPal_OpcDec8A: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x008B) -CallPal_OpcDec8B: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x008C) -CallPal_OpcDec8C: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x008D) -CallPal_OpcDec8D: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x008E) -CallPal_OpcDec8E: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x008F) -CallPal_OpcDec8F: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0090) -CallPal_OpcDec90: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0091) -CallPal_OpcDec91: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0092) -CallPal_OpcDec92: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0093) -CallPal_OpcDec93: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0094) -CallPal_OpcDec94: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0095) -CallPal_OpcDec95: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0096) -CallPal_OpcDec96: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0097) -CallPal_OpcDec97: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0098) -CallPal_OpcDec98: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x0099) -CallPal_OpcDec99: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x009A) -CallPal_OpcDec9A: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x009B) -CallPal_OpcDec9B: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x009C) -CallPal_OpcDec9C: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x009D) -CallPal_OpcDec9D: - br r31, osfpal_calpal_opcdec - -// .sbttl "rdunique - PALcode for rdunique instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// v0 (r0) <- unique -// -//- -// - CALL_PAL_UNPRIV(PAL_RDUNIQUE_ENTRY) -CALL_PALrdunique_: - mfpr r0, pt_pcbb // get pcb pointer - ldqp r0, osfpcb_q_unique(r0) // get new value - - hw_rei - -// .sbttl "wrunique - PALcode for wrunique instruction" -//+ -// -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// unique <- a0 (r16) -// -//- -// -CALL_PAL_UNPRIV(PAL_WRUNIQUE_ENTRY) -CALL_PAL_Wrunique: - nop - mfpr r12, pt_pcbb // get pcb pointer - stqp r16, osfpcb_q_unique(r12)// get new value - nop // Pad palshadow write - hw_rei // back - -// .sbttl "CALL_PAL OPCDECs" - - CALL_PAL_UNPRIV(0x00A0) -CallPal_OpcDecA0: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A1) -CallPal_OpcDecA1: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A2) -CallPal_OpcDecA2: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A3) -CallPal_OpcDecA3: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A4) -CallPal_OpcDecA4: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A5) -CallPal_OpcDecA5: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A6) -CallPal_OpcDecA6: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A7) -CallPal_OpcDecA7: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A8) -CallPal_OpcDecA8: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00A9) -CallPal_OpcDecA9: - br r31, osfpal_calpal_opcdec - - -// .sbttl "gentrap - PALcode for gentrap instruction" -//+ -// CALL_PAL_gentrap: -// Entry: -// Vectored into via hardware PALcode instruction dispatch. -// -// Function: -// Build stack frame -// a0 <- code -// a1 <- unpred -// a2 <- unpred -// vector via entIF -// -//- - - CALL_PAL_UNPRIV(0x00AA) -// unsupported in Hudson code .. pboyle Nov/95 -CALL_PAL_gentrap: - sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - bis r11, r31, r12 // Save PS for stack write - bge r25, CALL_PAL_gentrap_10_ // no stack swap needed if cm=kern - - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r30, pt_usp // save user stack - - bis r31, r31, r11 // Set new PS - mfpr r30, pt_ksp - -CALL_PAL_gentrap_10_: - lda sp, 0-osfsf_c_size(sp)// allocate stack space - mfpr r14, exc_addr // get pc - - stq r16, osfsf_a0(sp) // save regs - bis r31, osf_a0_gentrap, r16// set a0 - - stq r17, osfsf_a1(sp) // a1 - br r31, bpt_bchk_common // out of call_pal space - - -// .sbttl "CALL_PAL OPCDECs" - - CALL_PAL_UNPRIV(0x00AB) -CallPal_OpcDecAB: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00AC) -CallPal_OpcDecAC: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00AD) -CallPal_OpcDecAD: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00AE) -CallPal_OpcDecAE: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00AF) -CallPal_OpcDecAF: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B0) -CallPal_OpcDecB0: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B1) -CallPal_OpcDecB1: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B2) -CallPal_OpcDecB2: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B3) -CallPal_OpcDecB3: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B4) -CallPal_OpcDecB4: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B5) -CallPal_OpcDecB5: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B6) -CallPal_OpcDecB6: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B7) -CallPal_OpcDecB7: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B8) -CallPal_OpcDecB8: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00B9) -CallPal_OpcDecB9: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00BA) -CallPal_OpcDecBA: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00BB) -CallPal_OpcDecBB: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00BC) -CallPal_OpcDecBC: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00BD) -CallPal_OpcDecBD: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00BE) -CallPal_OpcDecBE: - br r31, osfpal_calpal_opcdec - - CALL_PAL_UNPRIV(0x00BF) -CallPal_OpcDecBF: - // MODIFIED BY EGH 2/25/04 - br r31, copypal_impl - - -/*======================================================================*/ -/* OSF/1 CALL_PAL CONTINUATION AREA */ -/*======================================================================*/ - - .text 2 - - . = 0x4000 - - -// .sbttl "Continuation of MTPR_PERFMON" - ALIGN_BLOCK -#if perfmon_debug == 0 - // "real" performance monitoring code -// mux ctl -perfmon_muxctl: - lda r8, 1(r31) // get a 1 - sll r8, pmctr_v_sel0, r8 // move to sel0 position - or r8, ((0xf<<pmctr_v_sel1) | (0xf<<pmctr_v_sel2)), r8 // build mux select mask - and r17, r8, r25 // isolate pmctr mux select bits - mfpr r0, ev5__pmctr - bic r0, r8, r0 // clear old mux select bits - or r0,r25, r25 // or in new mux select bits - mtpr r25, ev5__pmctr - - // ok, now tackle cbox mux selects - ldah r14, 0xfff0(r31) - zap r14, 0xE0, r14 // Get Cbox IPR base -//orig get_bc_ctl_shadow r16 // bc_ctl returned in lower longword -// adapted from ev5_pal_macros.mar - mfpr r16, pt_impure - lda r16, CNS_Q_IPR(r16) - RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16); - - lda r8, 0x3F(r31) // build mux select mask - sll r8, bc_ctl_v_pm_mux_sel, r8 - - and r17, r8, r25 // isolate bc_ctl mux select bits - bic r16, r8, r16 // isolate old mux select bits - or r16, r25, r25 // create new bc_ctl - mb // clear out cbox for future ipr write - stqp r25, ev5__bc_ctl(r14) // store to cbox ipr - mb // clear out cbox for future ipr write - -//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr -// adapted from ev5_pal_macros.mar - mfpr r16, pt_impure - lda r16, CNS_Q_IPR(r16) - SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16); - - br r31, perfmon_success - - -// requested to disable perf monitoring -perfmon_dis: - mfpr r14, ev5__pmctr // read ibox pmctr ipr -perfmon_dis_ctr0: // and begin with ctr0 - blbc r17, perfmon_dis_ctr1 // do not disable ctr0 - lda r8, 3(r31) - sll r8, pmctr_v_ctl0, r8 - bic r14, r8, r14 // disable ctr0 -perfmon_dis_ctr1: - srl r17, 1, r17 - blbc r17, perfmon_dis_ctr2 // do not disable ctr1 - lda r8, 3(r31) - sll r8, pmctr_v_ctl1, r8 - bic r14, r8, r14 // disable ctr1 -perfmon_dis_ctr2: - srl r17, 1, r17 - blbc r17, perfmon_dis_update // do not disable ctr2 - lda r8, 3(r31) - sll r8, pmctr_v_ctl2, r8 - bic r14, r8, r14 // disable ctr2 -perfmon_dis_update: - mtpr r14, ev5__pmctr // update pmctr ipr -//;the following code is not needed for ev5 pass2 and later, but doesn't hurt anything to leave in -// adapted from ev5_pal_macros.mar -//orig get_pmctr_ctl r8, r25 // pmctr_ctl bit in r8. adjusted impure pointer in r25 - mfpr r25, pt_impure - lda r25, CNS_Q_IPR(r25) - RESTORE_SHADOW(r8,CNS_Q_PM_CTL,r25); - - lda r17, 0x3F(r31) // build mask - sll r17, pmctr_v_ctl2, r17 // shift mask to correct position - and r14, r17, r14 // isolate ctl bits - bic r8, r17, r8 // clear out old ctl bits - or r14, r8, r14 // create shadow ctl bits -//orig store_reg1 pmctr_ctl, r14, r25, ipr=1 // update pmctr_ctl register -//adjusted impure pointer still in r25 - SAVE_SHADOW(r14,CNS_Q_PM_CTL,r25); - - br r31, perfmon_success - - -// requested to enable perf monitoring -//;the following code can be greatly simplified for pass2, but should work fine as is. - - -perfmon_enclr: - lda r9, 1(r31) // set enclr flag - br perfmon_en_cont - -perfmon_en: - bis r31, r31, r9 // clear enclr flag - -perfmon_en_cont: - mfpr r8, pt_pcbb // get PCB base -//orig get_pmctr_ctl r25, r25 - mfpr r25, pt_impure - lda r25, CNS_Q_IPR(r25) - RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r25); - - ldqp r16, osfpcb_q_fen(r8) // read DAT/PME/FEN quadword - mfpr r14, ev5__pmctr // read ibox pmctr ipr - srl r16, osfpcb_v_pme, r16 // get pme bit - mfpr r13, icsr - and r16, 1, r16 // isolate pme bit - - // this code only needed in pass2 and later -//orig sget_addr r12, 1<<icsr_v_pmp, r31 - lda r12, 1<<icsr_v_pmp(r31) // pb - bic r13, r12, r13 // clear pmp bit - sll r16, icsr_v_pmp, r12 // move pme bit to icsr<pmp> position - or r12, r13, r13 // new icsr with icsr<pmp> bit set/clear - ev5_pass2 mtpr r13, icsr // update icsr - -#if ev5_p1 != 0 - lda r12, 1(r31) - cmovlbc r25, r12, r16 // r16<0> set if either pme=1 or sprocess=0 (sprocess in bit 0 of r25) -#else - bis r31, 1, r16 // set r16<0> on pass2 to update pmctr always (icsr provides real enable) -#endif - - sll r25, 6, r25 // shift frequency bits into pmctr_v_ctl positions - bis r14, r31, r13 // copy pmctr - -perfmon_en_ctr0: // and begin with ctr0 - blbc r17, perfmon_en_ctr1 // do not enable ctr0 - - blbc r9, perfmon_en_noclr0 // enclr flag set, clear ctr0 field - lda r8, 0xffff(r31) - zapnot r8, 3, r8 // ctr0<15:0> mask - sll r8, pmctr_v_ctr0, r8 - bic r14, r8, r14 // clear ctr bits - bic r13, r8, r13 // clear ctr bits - -perfmon_en_noclr0: -//orig get_addr r8, 3<<pmctr_v_ctl0, r31 - LDLI(r8, (3<<pmctr_v_ctl0)) - and r25, r8, r12 //isolate frequency select bits for ctr0 - bic r14, r8, r14 // clear ctl0 bits in preparation for enabling - or r14,r12,r14 // or in new ctl0 bits - -perfmon_en_ctr1: // enable ctr1 - srl r17, 1, r17 // get ctr1 enable - blbc r17, perfmon_en_ctr2 // do not enable ctr1 - - blbc r9, perfmon_en_noclr1 // if enclr flag set, clear ctr1 field - lda r8, 0xffff(r31) - zapnot r8, 3, r8 // ctr1<15:0> mask - sll r8, pmctr_v_ctr1, r8 - bic r14, r8, r14 // clear ctr bits - bic r13, r8, r13 // clear ctr bits - -perfmon_en_noclr1: -//orig get_addr r8, 3<<pmctr_v_ctl1, r31 - LDLI(r8, (3<<pmctr_v_ctl1)) - and r25, r8, r12 //isolate frequency select bits for ctr1 - bic r14, r8, r14 // clear ctl1 bits in preparation for enabling - or r14,r12,r14 // or in new ctl1 bits - -perfmon_en_ctr2: // enable ctr2 - srl r17, 1, r17 // get ctr2 enable - blbc r17, perfmon_en_return // do not enable ctr2 - return - - blbc r9, perfmon_en_noclr2 // if enclr flag set, clear ctr2 field - lda r8, 0x3FFF(r31) // ctr2<13:0> mask - sll r8, pmctr_v_ctr2, r8 - bic r14, r8, r14 // clear ctr bits - bic r13, r8, r13 // clear ctr bits - -perfmon_en_noclr2: -//orig get_addr r8, 3<<pmctr_v_ctl2, r31 - LDLI(r8, (3<<pmctr_v_ctl2)) - and r25, r8, r12 //isolate frequency select bits for ctr2 - bic r14, r8, r14 // clear ctl2 bits in preparation for enabling - or r14,r12,r14 // or in new ctl2 bits - -perfmon_en_return: - cmovlbs r16, r14, r13 // if pme enabled, move enables into pmctr - // else only do the counter clears - mtpr r13, ev5__pmctr // update pmctr ipr - -//;this code not needed for pass2 and later, but does not hurt to leave it in - lda r8, 0x3F(r31) -//orig get_pmctr_ctl r25, r12 // read pmctr ctl; r12=adjusted impure pointer - mfpr r12, pt_impure - lda r12, CNS_Q_IPR(r12) - RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r12); - - sll r8, pmctr_v_ctl2, r8 // build ctl mask - and r8, r14, r14 // isolate new ctl bits - bic r25, r8, r25 // clear out old ctl value - or r25, r14, r14 // create new pmctr_ctl -//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 - SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr - - br r31, perfmon_success - - -// options... -perfmon_ctl: - -// set mode -//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer - mfpr r12, pt_impure - lda r12, CNS_Q_IPR(r12) - RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12); - -//orig get_addr r8, (1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk), r31 // build mode mask for pmctr register - LDLI(r8, ((1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk))) - mfpr r0, ev5__pmctr - and r17, r8, r25 // isolate pmctr mode bits - bic r0, r8, r0 // clear old mode bits - or r0, r25, r25 // or in new mode bits - mtpr r25, ev5__pmctr - -//;the following code will only be used in pass2, but should not hurt anything if run in pass1. - mfpr r8, icsr - lda r25, 1<<icsr_v_pma(r31) // set icsr<pma> if r17<0>=0 - bic r8, r25, r8 // clear old pma bit - cmovlbs r17, r31, r25 // and clear icsr<pma> if r17<0>=1 - or r8, r25, r8 - ev5_pass2 mtpr r8, icsr // 4 bubbles to hw_rei - mfpr r31, pt0 // pad icsr write - mfpr r31, pt0 // pad icsr write - -//;the following code not needed for pass2 and later, but should work anyway. - bis r14, 1, r14 // set for select processes - blbs r17, perfmon_sp // branch if select processes - bic r14, 1, r14 // all processes -perfmon_sp: -//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register - SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr - br r31, perfmon_success - -// counter frequency select -perfmon_freq: -//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer - mfpr r12, pt_impure - lda r12, CNS_Q_IPR(r12) - RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12); - - lda r8, 0x3F(r31) -//orig sll r8, pmctr_ctl_v_frq2, r8 // build mask for frequency select field -// I guess this should be a shift of 4 bits from the above control register structure .. pb -#define pmctr_ctl_v_frq2_SHIFT 4 - sll r8, pmctr_ctl_v_frq2_SHIFT, r8 // build mask for frequency select field - - and r8, r17, r17 - bic r14, r8, r14 // clear out old frequency select bits - - or r17, r14, r14 // or in new frequency select info -//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register - SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr - - br r31, perfmon_success - -// read counters -perfmon_rd: - mfpr r0, ev5__pmctr - or r0, 1, r0 // or in return status - hw_rei // back to user - -// write counters -perfmon_wr: - mfpr r14, ev5__pmctr - lda r8, 0x3FFF(r31) // ctr2<13:0> mask - sll r8, pmctr_v_ctr2, r8 - -//orig get_addr r9, 0xFFFFFFFF, r31, verify=0 // ctr2<15:0>,ctr1<15:0> mask - LDLI(r9, (0xFFFFFFFF)) - sll r9, pmctr_v_ctr1, r9 - or r8, r9, r8 // or ctr2, ctr1, ctr0 mask - bic r14, r8, r14 // clear ctr fields - and r17, r8, r25 // clear all but ctr fields - or r25, r14, r14 // write ctr fields - mtpr r14, ev5__pmctr // update pmctr ipr - - mfpr r31, pt0 // pad pmctr write (needed only to keep PVC happy) - -perfmon_success: - or r31, 1, r0 // set success - hw_rei // back to user - -perfmon_unknown: - or r31, r31, r0 // set fail - hw_rei // back to user - -#else - -// end of "real code", start of debug code - -//+ -// Debug environment: -// (in pass2, always set icsr<pma> to ensure master counter enable is on) -// R16 = 0 Write to on-chip performance monitor ipr -// r17 = on-chip ipr -// r0 = return value of read of on-chip performance monitor ipr -// R16 = 1 Setup Cbox mux selects -// r17 = Cbox mux selects in same position as in bc_ctl ipr. -// r0 = return value of read of on-chip performance monitor ipr -// -//- -pal_perfmon_debug: - mfpr r8, icsr - lda r9, 1<<icsr_v_pma(r31) - bis r8, r9, r8 - mtpr r8, icsr - - mfpr r0, ev5__pmctr // read old value - bne r16, cbox_mux_sel - - mtpr r17, ev5__pmctr // update pmctr ipr - br r31, end_pm - -cbox_mux_sel: - // ok, now tackle cbox mux selects - ldah r14, 0xfff0(r31) - zap r14, 0xE0, r14 // Get Cbox IPR base -//orig get_bc_ctl_shadow r16 // bc_ctl returned - mfpr r16, pt_impure - lda r16, CNS_Q_IPR(r16) - RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16); - - lda r8, 0x3F(r31) // build mux select mask - sll r8, BC_CTL_V_PM_MUX_SEL, r8 - - and r17, r8, r25 // isolate bc_ctl mux select bits - bic r16, r8, r16 // isolate old mux select bits - or r16, r25, r25 // create new bc_ctl - mb // clear out cbox for future ipr write - stqp r25, ev5__bc_ctl(r14) // store to cbox ipr - mb // clear out cbox for future ipr write -//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr - mfpr r16, pt_impure - lda r16, CNS_Q_IPR(r16) - SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16); - -end_pm: hw_rei - -#endif - - -//;The following code is a workaround for a cpu bug where Istream prefetches to -//;super-page address space in user mode may escape off-chip. -#if spe_fix != 0 - - ALIGN_BLOCK -hw_rei_update_spe: - mfpr r12, pt_misc // get previous mode - srl r11, osfps_v_mode, r10 // isolate current mode bit - and r10, 1, r10 - extbl r12, 7, r8 // get previous mode field - and r8, 1, r8 // isolate previous mode bit - cmpeq r10, r8, r8 // compare previous and current modes - beq r8, hw_rei_update_spe_5_ - hw_rei // if same, just return - -hw_rei_update_spe_5_: - -#if fill_err_hack != 0 - - fill_error_hack -#endif - - mfpr r8, icsr // get current icsr value - ldah r9, (2<<(icsr_v_spe-16))(r31) // get spe bit mask - bic r8, r9, r8 // disable spe - xor r10, 1, r9 // flip mode for new spe bit - sll r9, icsr_v_spe+1, r9 // shift into position - bis r8, r9, r8 // enable/disable spe - lda r9, 1(r31) // now update our flag - sll r9, pt_misc_v_cm, r9 // previous mode saved bit mask - bic r12, r9, r12 // clear saved previous mode - sll r10, pt_misc_v_cm, r9 // current mode saved bit mask - bis r12, r9, r12 // set saved current mode - mtpr r12, pt_misc // update pt_misc - mtpr r8, icsr // update icsr - -#if osf_chm_fix != 0 - - - blbc r10, hw_rei_update_spe_10_ // branch if not user mode - - mb // ensure no outstanding fills - lda r12, 1<<dc_mode_v_dc_ena(r31) // User mode - mtpr r12, dc_mode // Turn on dcache - mtpr r31, dc_flush // and flush it - br r31, pal_ic_flush - -hw_rei_update_spe_10_: mfpr r9, pt_pcbb // Kernel mode - ldqp r9, osfpcb_q_Fen(r9) // get FEN - blbc r9, pal_ic_flush // return if FP disabled - mb // ensure no outstanding fills - mtpr r31, dc_mode // turn off dcache -#endif - - - br r31, pal_ic_flush // Pal restriction - must flush Icache if changing ICSR<SPE> -#endif - - -copypal_impl: - mov r16, r0 - bic r18, 63, r8 - and r18, 63, r18 - beq r8, cache_copy_done -cache_loop: - ldf f17, 0(r16) - stf f17, 0(r16) - addq r17, 64, r17 - addq r16, 64, r16 - subq r8, 64, r8 - bne r8, cache_loop -cache_copy_done: - ble r18, finished #if len <=0 we are finished - ldq_u r8, 0(r17) - xor r17, r16, r9 - and r9, 7, r9 - and r16, 7, r10 - bne r9, unaligned - beq r10, aligned - ldq_u r9, 0(r16) - addq r18, r10, r18 - mskqh r8, r17, r8 - mskql r9, r17, r9 - bis r8, r9, r8 -aligned: - subq r18, 1, r10 - bic r10, 7, r10 - and r18, 7, r18 - beq r10, aligned_done -loop: - stq_u r8, 0(r16) - ldq_u r8, 8(r17) - subq r10, 8, r10 - lda r16,8(r16) - lda r17,8(r17) - bne r10, loop -aligned_done: - bne r18, few_left - stq_u r8, 0(r16) - br r31, finished - few_left: - mskql r8, r18, r10 - ldq_u r9, 0(r16) - mskqh r9, r18, r9 - bis r10, r9, r10 - stq_u r10, 0(r16) - br r31, finished -unaligned: - addq r17, r18, r25 - cmpule r18, 8, r9 - bne r9, unaligned_few_left - beq r10, unaligned_dest_aligned - and r16, 7, r10 - subq r31, r10, r10 - addq r10, 8, r10 - ldq_u r9, 7(r17) - extql r8, r17, r8 - extqh r9, r17, r9 - bis r8, r9, r12 - insql r12, r16, r12 - ldq_u r13, 0(r16) - mskql r13, r16, r13 - bis r12, r13, r12 - stq_u r12, 0(r16) - addq r16, r10, r16 - addq r17, r10, r17 - subq r18, r10, r18 - ldq_u r8, 0(r17) -unaligned_dest_aligned: - subq r18, 1, r10 - bic r10, 7, r10 - and r18, 7, r18 - beq r10, unaligned_partial_left -unaligned_loop: - ldq_u r9, 7(r17) - lda r17, 8(r17) - extql r8, r17, r12 - extqh r9, r17, r13 - subq r10, 8, r10 - bis r12, r13, r13 - stq r13, 0(r16) - lda r16, 8(r16) - beq r10, unaligned_second_partial_left - ldq_u r8, 7(r17) - lda r17, 8(r17) - extql r9, r17, r12 - extqh r8, r17, r13 - bis r12, r13, r13 - subq r10, 8, r10 - stq r13, 0(r16) - lda r16, 8(r16) - bne r10, unaligned_loop -unaligned_partial_left: - mov r8, r9 -unaligned_second_partial_left: - ldq_u r8, -1(r25) - extql r9, r17, r9 - extqh r8, r17, r8 - bis r8, r9, r8 - bne r18, few_left - stq_u r8, 0(r16) - br r31, finished -unaligned_few_left: - ldq_u r9, -1(r25) - extql r8, r17, r8 - extqh r9, r17, r9 - bis r8, r9, r8 - insqh r8, r16, r9 - insql r8, r16, r8 - lda r12, -1(r31) - mskql r12, r18, r13 - cmovne r13, r13, r12 - insqh r12, r16, r13 - insql r12, r16, r12 - addq r16, r18, r10 - ldq_u r14, 0(r16) - ldq_u r25, -1(r10) - bic r14, r12, r14 - bic r25, r13, r25 - and r8, r12, r8 - and r9, r13, r9 - bis r8, r14, r8 - bis r9, r25, r9 - stq_u r9, -1(r10) - stq_u r8, 0(r16) -finished: - hw_rei diff --git a/system/alpha/palcode/platform_tlaser.S b/system/alpha/palcode/platform.S index 41f31ecf9..5c4254fd3 100644 --- a/system/alpha/palcode/platform_tlaser.S +++ b/system/alpha/palcode/platform.S @@ -30,50 +30,30 @@ */ /* -Copyright 1993 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -// build_fixed_image: not sure what means -// real_mm to be replaced during rewrite -// remove_save_state remove_restore_state can be remooved to save space ?? - - -#define egore 0 -#define acore 0 -#define beh_model 0 -#define ev5_p2 1 -#define ev5_p1 0 -#define ldvpte_bug_fix 1 -#define spe_fix 0 -#define osf_chm_fix 0 -#define build_fixed_image 0 -#define enable_p4_fixups 0 -#define osf_svmin 1 -#define enable_physical_console 0 -#define fill_err_hack 0 -#define icflush_on_tbix 0 -#define max_cpuid 1 -#define perfmon_debug 0 -#define rax_mode 0 + * Copyright 1993 Hewlett-Packard Development Company, L.P. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#define max_cpuid 1 #define hw_rei_spe hw_rei #include "ev5_defs.h" @@ -87,20 +67,6 @@ SOFTWARE. #include "cserve.h" #include "tlaser.h" -#define ldlp ldl_p -#define ldqp ldq_p - -#define stlp stl_p -#define stqp stq_p -#define stqpc stqp - -#ifdef SIMOS -#define ldqpl ldq_p -#define sdqpl sdq_p -#else -<--bomb> -#endif - #define pt_entInt pt_entint #define pt_entArith pt_entarith #define mchk_size ((mchk_cpu_base + 7 + 8) &0xfff8) @@ -122,13 +88,37 @@ SOFTWARE. #define osfpcb_q_Ksp pcb_q_ksp #define pal_impure_common_size ((0x200 + 7) & 0xfff8) +#if defined(BIG_TSUNAMI) +#define MAXPROC 0x3f +#define IPIQ_addr 0x800 +#define IPIQ_shift 0 +#define IPIR_addr 0x840 +#define IPIR_shift 0 +#define RTC_addr 0x880 +#define RTC_shift 0 +#define DIR_addr 0xa2 +#elif defined(TSUNAMI) +#define MAXPROC 0x3 +#define IPIQ_addr 0x080 +#define IPIQ_shift 12 +#define IPIR_addr 0x080 +#define IPIR_shift 8 +#define RTC_addr 0x080 +#define RTC_shift 4 +#define DIR_addr 0xa0 +#elif defined(TLASER) +#define MAXPROC 0xf +#else +#error Must define BIG_TSUNAMI, TSUNAMI, or TLASER +#endif + #define ALIGN_BLOCK \ .align 5 #define ALIGN_BRANCH \ .align 3 -#define EXPORT(_x) \ +#define EXPORT(_x) \ .align 5; \ .globl _x; \ _x: @@ -152,73 +142,43 @@ _x: #define BIT(_x) (1<<(_x)) -// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX -// XXX back to original code - -// .sbttl "System specific code - beh model version" - +// System specific code - beh model version +// // // Entry points -// SYS$CFLUSH - Cache flush -// SYS$CSERVE - Console service -// SYS$WRIPIR - interprocessor interrupts -// SYS$HALT_INTERRUPT - Halt interrupt -// SYS$PASSIVE_RELEASE - Interrupt, passive release -// SYS$INTERRUPT - Interrupt -// SYS$RESET - Reset -// SYS$ENTER_CONSOLE - +// SYS_CFLUSH - Cache flush +// SYS_CSERVE - Console service +// SYS_WRIPIR - interprocessor interrupts +// SYS_HALT_INTERRUPT - Halt interrupt +// SYS_PASSIVE_RELEASE - Interrupt, passive release +// SYS_INTERRUPT - Interrupt +// SYS_RESET - Reset +// SYS_ENTER_CONSOLE +// // // Macro to read TLINTRSUMx // -// Based on the CPU_NUMBER, read either the TLINTRSUM0 or TLINTRSUM1 register +// Based on the CPU_NUMBER, read either the TLINTRSUM0 or TLINTRSUM1 register // // Assumed register usage: -// rsum TLINTRSUMx contents -// raddr node space address -// scratch scratch register - - -// .macro Read_TLINTRSUMx rsum, raddr, scratch, ?label1, ?label2 -// -// nop -// mfpr 'scratch', pt_whami // Get our whami (VID) -// -// extbl 'scratch', #1, 'scratch' // shift down to bit 0 -// lda 'raddr', ^xff88(r31) // Get base node space address bits -// -// sll 'raddr', #24, 'raddr' // Shift up to proper position -// srl 'scratch', #1, 'rsum' // Shift off the cpu number -// -// sll 'rsum', #22, 'rsum' // Get our node offset -// addq 'raddr', 'rsum', 'raddr' // Get our base node space address -// -// blbs 'scratch', label1 -// lda 'raddr', <tlep$tlintrsum0_offset>('raddr') -// -// br r31, label2 -//label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr') -// -//label2: ldlp 'rsum', 0('raddr') // read the right tlintrsum reg -//.endm - -#define Read_TLINTRSUMx(_rsum,_raddr,_scratch) \ - nop; \ - mfpr _scratch,pt_whami; \ - extbl _scratch,1,_scratch; \ - lda _raddr,0xff88(zero); \ - sll _raddr,24,_raddr; \ - srl _scratch,1,_rsum; \ - sll _rsum,22,_rsum; \ - addq _raddr,_rsum,_raddr; \ - blbs _scratch,1f; \ - lda _raddr,0x1180(_raddr); \ - br r31,2f; \ -1: \ - lda _raddr,0x11c0(_raddr); \ -2: ldlp _rsum,0(_raddr) - - +// rsum TLINTRSUMx contents +// raddr node space address +// scratch scratch register +// +#define Read_TLINTRSUMx(_rsum, _raddr, _scratch) \ + nop; \ + mfpr _scratch, pt_whami; /* Get our whami (VID) */ \ + extbl _scratch, 1, _scratch; /* shift down to bit 0 */ \ + lda _raddr, 0xff88(zero); /* Get base node space address bits */ \ + sll _raddr, 24, _raddr; /* Shift up to proper position */ \ + srl _scratch, 1, _rsum; /* Shift off the cpu number */ \ + sll _rsum, 22, _rsum; /* Get our node offset */ \ + addq _raddr, _rsum, _raddr; /* Get our base node space address */ \ + blbs _scratch, 1f; \ + lda _raddr, 0x1180(_raddr); \ + br r31, 2f; \ +1: lda _raddr, 0x11c0(_raddr); \ +2: ldl_p _rsum, 0(_raddr) /* read the right tlintrsum reg */ // // Macro to write TLINTRSUMx @@ -226,54 +186,26 @@ _x: // Based on the CPU_NUMBER, write either the TLINTRSUM0 or TLINTRSUM1 register // // Assumed register usage: -// rsum TLINTRSUMx write data -// raddr node space address -// scratch scratch register - -// .macro Write_TLINTRSUMx rsum, raddr, whami, ?label1, ?label2 -// -// nop -// mfpr 'whami', pt_whami // Get our whami (VID) -// -// extbl 'whami', #1, 'whami' // shift down to bit 0 -// lda 'raddr', ^xff88(r31) // Get base node space address bits -// -// sll 'raddr', #24, 'raddr' // Shift up to proper position -// blbs 'whami', label1 -// -// lda 'raddr', <tlep$tlintrsum0_offset>('raddr') -// br r31, label2 -// -// label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr') -// label2: srl 'whami', #1, 'whami' // Shift off the cpu number -// -// sll 'whami', #22, 'whami' // Get our node offset -// addq 'raddr', 'whami', 'raddr' // Get our base node space address -// -// mb -// stqp 'rsum', 0('raddr') // write the right tlintrsum reg -// mb -// ldqp 'rsum', 0('raddr') // dummy read to tlintrsum -// bis 'rsum', 'rsum', 'rsum' // needed to complete the ldqp above -jpo -// .endm - - -#define Write_TLINTRSUMx(_rsum,_raddr,_whami) \ - nop; \ - mfpr _whami,pt_whami; \ - extbl _whami,1,_whami; \ - lda _raddr,0xff88(zero); \ - sll _raddr,24,_raddr; \ - blbs _whami,1f; \ - lda _raddr,0x1180(_raddr);\ - br zero,2f; \ -1: lda _raddr,0x11c0(_raddr);\ -2: srl _whami,1,_whami; \ - addq _raddr,_whami,_raddr; \ - mb; \ - stqp _rsum,0(_raddr); \ - ldqp _rsum,0(_raddr); \ - bis _rsum,_rsum,_rsum +// rsum TLINTRSUMx write data +// raddr node space address +// scratch scratch register +// +#define Write_TLINTRSUMx(_rsum,_raddr,_whami) \ + nop; \ + mfpr _whami, pt_whami; /* Get our whami (VID) */ \ + extbl _whami, 1, _whami; /* shift down to bit 0 */ \ + lda _raddr, 0xff88(zero); /* Get base node space address bits */ \ + sll _raddr, 24, _raddr; /* Shift up to proper position */ \ + blbs _whami, 1f; \ + lda _raddr, 0x1180(_raddr); \ + br zero, 2f; \ +1: lda _raddr, 0x11c0(_raddr); \ +2: srl _whami, 1, _whami; /* Get our node offset */ \ + addq _raddr, _whami, _raddr; /* Get our base node space address */ \ + mb; \ + stq_p _rsum, 0(_raddr); /* write the right tlintrsum reg */ \ + ldq_p _rsum, 0(_raddr); /* dummy read to tlintrsum */ \ + bis _rsum, _rsum, _rsum /* needed to complete the ldqp above */ // @@ -282,239 +214,131 @@ _x: // Assumed register usage: // rmask - TLINTRSUMx contents, shifted to isolate IOx bits // rid - TLSB Node ID of highest TIOP - -//.macro Intr_Find_TIOP rmask, rid, ?l1, ?l2, ?l3, ?l4, ?l5, ?l6 -// srl 'rmask', #4, 'rid' // check IOP8 -// blbc 'rid', l1 // not IOP8 -// -// lda 'rid', 8(r31) // IOP8 -// br r31, l6 -// -// l1: srl 'rmask', #3, 'rid' // check IOP7 -// blbc 'rid', l2 // not IOP7 -// -// lda 'rid', 7(r31) // IOP7 -// br r31, l6 -// -// l2: srl 'rmask', #2, 'rid' // check IOP6 -// blbc 'rid', l3 // not IOP6 -// -// lda 'rid', 6(r31) // IOP6 -// br r31, l6 -// -// l3: srl 'rmask', #1, 'rid' // check IOP5 -// blbc 'rid', l4 // not IOP5 -// -// lda 'rid', 5(r31) // IOP5 -// br r31, l6 -// -// l4: srl 'rmask', #0, 'rid' // check IOP4 -// blbc 'rid', l5 // not IOP4 -// -// lda r14, 4(r31) // IOP4 -// br r31, l6 -// -// l5: lda r14, 0(r31) // passive release -// l6: -// .endm - - -#define Intr_Find_TIOP(_rmask,_rid) \ - srl _rmask,3,_rid; \ - blbc _rid,1f; \ - lda _rid,8(zero); \ - br zero,6f; \ -1: srl _rmask,3,_rid; \ - blbc _rid, 2f; \ - lda _rid, 7(r31); \ - br r31, 6f; \ -2: srl _rmask, 2, _rid; \ - blbc _rid, 3f; \ - lda _rid, 6(r31); \ - br r31, 6f; \ -3: srl _rmask, 1, _rid; \ - blbc _rid, 4f; \ - lda _rid, 5(r31); \ - br r31, 6f; \ -4: srl _rmask, 0, _rid; \ - blbc _rid, 5f; \ - lda r14, 4(r31); \ - br r31, 6f; \ -5: lda r14, 0(r31); \ +// +#define Intr_Find_TIOP(_rmask,_rid) \ + srl _rmask,3,_rid; /* check IOP8 */ \ + blbc _rid,1f; /* not IOP8 */ \ + lda _rid,8(zero); /* IOP8 */ \ + br zero,6f; \ +1: srl _rmask,3,_rid; /* check IOP7 */ \ + blbc _rid, 2f; /* not IOP7 */ \ + lda _rid, 7(r31); /* IOP7 */ \ + br r31, 6f; \ +2: srl _rmask, 2, _rid; /* check IOP6 */ \ + blbc _rid, 3f; /* not IOP6 */ \ + lda _rid, 6(r31); /* IOP6 */ \ + br r31, 6f; \ +3: srl _rmask, 1, _rid; /* check IOP5 */ \ + blbc _rid, 4f; /* not IOP5 */ \ + lda _rid, 5(r31); /* IOP5 */ \ + br r31, 6f; \ +4: srl _rmask, 0, _rid; /* check IOP4 */ \ + blbc _rid, 5f; /* not IOP4 */ \ + lda r14, 4(r31); /* IOP4 */ \ + br r31, 6f; \ +5: lda r14, 0(r31); /* passive release */ \ 6: - - - // // Macro to calculate base node space address for given node id // // Assumed register usage: // rid - TLSB node id // raddr - base node space address - -//.macro Get_TLSB_Node_Address rid, raddr -// sll 'rid', #22, 'rid' // Get offset of IOP node -// lda 'raddr', ^xff88(r31) // Get base node space address bits -// -// sll 'raddr', #24, 'raddr' // Shift up to proper position -// addq 'raddr', 'rid', 'raddr' // Get TIOP node space address -// .iif ne turbo_pcia_intr_fix, srl 'rid', #22, 'rid' // Restore IOP node id -//.endm - - -#define turbo_pcia_intr_fix 0 - - -#if turbo_pcia_intr_fix != 0 -#define Get_TLSB_Node_Address(_rid,_raddr) \ - sll _rid,22,_rid; \ - lda _raddr,0xff88(zero); \ - sll _raddr,24,_raddr; \ - addq _raddr,_rid,_raddr; \ - srl _rid,22,_rid -#else -#define Get_TLSB_Node_Address(_rid,_raddr) \ - sll _rid,22,_rid; \ - lda _raddr,0xff88(zero); \ - sll _raddr,24,_raddr; \ - addq _raddr,_rid,_raddr -#endif - - - - - -// .macro mchk$TLEPstore rlog, rs, rs1, nodebase, tlepreg, clr, tlsb, crd -// .iif eq tlsb, lda 'rs1',<tlep$'tlepreg'_offset>(r31) -// .iif ne tlsb, lda 'rs1',<tlsb$'tlepreg'_offset>(r31) -// or 'rs1', 'nodebase', 'rs1' -// ldlp 'rs', 0('rs1') -// .iif eq crd, stlp 'rs', mchk$'tlepreg'('rlog') // store in frame -// .iif ne crd, stlp 'rs', mchk$crd_'tlepreg'('rlog') // store in frame -// .iif ne clr, stlp 'rs',0('rs1') // optional write to clear -// .endm - - -// .macro OSFmchk$TLEPstore tlepreg, clr=0, tlsb=0 -// mchk$TLEPstore r14, r8, r4, r13, <tlepreg>, <clr>, <tlsb>, crd=0 -// .endm - -#define CONCAT(_a,_b) _a ## _b - -#define OSFmchk_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \ - lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \ - or _rs1,_nodebase,_rs1; \ - ldlp _rs1,0(_rs1); \ - stlp _rs,CONCAT(mchk_,_tlepreg)(_rlog) +#define Get_TLSB_Node_Address(_rid,_raddr) \ + sll _rid, 22, _rid; \ + lda _raddr, 0xff88(zero); \ + sll _raddr, 24, _raddr; \ + addq _raddr, _rid, _raddr -#define OSFmchk_TLEPstore(_tlepreg) OSFmchk_TLEPstore_1(r14,r8,r4,r13,_tlepreg) +#define OSFmchk_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \ + lda _rs1, tlep_##_tlepreg(zero); \ + or _rs1, _nodebase, _rs1; \ + ldl_p _rs1, 0(_rs1); \ + stl_p _rs, mchk_##_tlepreg(_rlog) /* store in frame */ +#define OSFmchk_TLEPstore(_tlepreg) \ + OSFmchk_TLEPstore_1(r14,r8,r4,r13,_tlepreg) -// .macro OSFcrd$TLEPstore tlepreg, clr=0, tlsb=0 -// mchk$TLEPstore r14, r10, r1, r0, <tlepreg>, <clr>, <tlsb>, crd=1 -// .endm - -#define OSFcrd_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \ - lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \ - or _rs1,_nodebase,_rs1; \ - ldlp _rs1,0(_rs1); \ - stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog) +#define OSFcrd_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \ + lda _rs1, tlep_##_tlepreg(zero); \ + or _rs1, _nodebase, _rs1; \ + ldl_p _rs1, 0(_rs1); \ + stl_p _rs, mchk_crd_##_tlepreg(_rlog) #define OSFcrd_TLEPstore_tlsb_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \ - lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \ - or _rs1,_nodebase,_rs1; \ - ldlp _rs1,0(_rs1); \ - stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog) + lda _rs1, tlsb_##_tlepreg(zero); \ + or _rs1, _nodebase, _rs1; \ + ldl_p _rs1, 0(_rs1); \ + stl_p _rs,mchk_crd_##_tlepreg(_rlog) #define OSFcrd_TLEPstore_tlsb_clr_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \ - lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \ - or _rs1,_nodebase,_rs1; \ - ldlp _rs1,0(_rs1); \ - stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog); \ - stlp _rs,0(_rs1) - - -#define OSFcrd_TLEPstore(_tlepreg) OSFcrd_TLEPstore_1(r14,r8,r4,r13,_tlepreg) -#define OSFcrd_TLEPstore_tlsb(_tlepreg) OSFcrd_TLEPstore_tlsb_1(r14,r8,r4,r13,_tlepreg) -#define OSFcrd_TLEPstore_tlsb_clr(_tlepreg) OSFcrd_TLEPstore_tlsb_clr_1(r14,r8,r4,r13,_tlepreg) - - - - -// .macro save_pcia_intr irq -// and r13, #^xf, r25 // isolate low 4 bits -// addq r14, #4, r14 // format the TIOP Node id field -// sll r14, #4, r14 // shift the TIOP Node id -// or r14, r25, r10 // merge Node id/hose/HPC -// mfpr r14, pt14 // get saved value -// extbl r14, #'irq', r25 // confirm none outstanding -// bne r25, sys$machine_check_while_in_pal -// insbl r10, #'irq', r10 // align new info -// or r14, r10, r14 // merge info -// mtpr r14, pt14 // save it -// bic r13, #^xf, r13 // clear low 4 bits of vector -// .endm - -#define save_pcia_intr(_irq) \ - and r13, 0xf, r25; \ - addq r14, 4, r14; \ - sll r14, 4, r14; \ - or r14, r25, r10; \ - mfpr r14, pt14; \ - extbl r14, _irq, r25; \ - bne r25, sys_machine_check_while_in_pal; \ - insbl r10, _irq, r10; \ - or r14, r10, r14; \ - mtpr r14, pt14; \ - bic r13, 0xf, r13 - - - + lda _rs1,tlsb_##_tlepreg(zero); \ + or _rs1, _nodebase,_rs1; \ + ldl_p _rs1, 0(_rs1); \ + stl_p _rs, mchk_crd_##_tlepreg(_rlog); \ + stl_p _rs, 0(_rs1) + +#define OSFcrd_TLEPstore(_tlepreg) \ + OSFcrd_TLEPstore_1(r14,r8,r4,r13,_tlepreg) +#define OSFcrd_TLEPstore_tlsb(_tlepreg) \ + OSFcrd_TLEPstore_tlsb_1(r14,r8,r4,r13,_tlepreg) +#define OSFcrd_TLEPstore_tlsb_clr(_tlepreg) \ + OSFcrd_TLEPstore_tlsb_clr_1(r14,r8,r4,r13,_tlepreg) + + +#define save_pcia_intr(_irq) \ + and r13, 0xf, r25; /* isolate low 4 bits */ \ + addq r14, 4, r14; /* format the TIOP Node id field */ \ + sll r14, 4, r14; /* shift the TIOP Node id */ \ + or r14, r25, r10; /* merge Node id/hose/HPC */ \ + mfpr r14, pt14; /* get saved value */ \ + extbl r14, _irq, r25; /* confirm none outstanding */ \ + bne r25, sys_machine_check_while_in_pal; \ + insbl r10, _irq, r10; /* align new info */ \ + or r14, r10, r14; /* merge info */ \ + mtpr r14, pt14; /* save it */ \ + bic r13, 0xf, r13 /* clear low 4 bits of vector */ + + +// wripir - PALcode for wripir instruction +// R16 has the processor number. +// ALIGN_BLOCK - -// .sbttl "wripir - PALcode for wripir instruction" -//orig SYS$WRIPIR: // R16 has the processor number. - EXPORT(sys_wripir) - -//++ -// Convert the processor number to a CPU mask -//-- - - and r16,0xf, r14 // mask the top stuff (16 CPUs supported) - bis r31,0x1,r16 // get a one - sll r16,r14,r14 // shift the bit to the right place - -//++ -// Build the Broadcast Space base address -//-- - lda r13,0xff8e(r31) // Load the upper address bits - sll r13,24,r13 // shift them to the top - -//++ -// Send out the IP Intr -//-- - stqp r14, 0x40(r13) // Write to TLIPINTR reg WAS TLSB_TLIPINTR_OFFSET - wmb // Push out the store - - hw_rei - - - ALIGN_BLOCK -// .sbttl "CFLUSH- PALcode for CFLUSH instruction" -//+ -// SYS$CFLUSH + // + // Convert the processor number to a CPU mask + // + and r16, MAXPROC, r14 // mask the top stuff: MAXPROC+1 CPUs supported + bis r31, 0x1, r16 // get a one + sll r16, r14, r14 // shift the bit to the right place + + // + // Build the Broadcast Space base address + // + lda r13, 0xff8e(r31) // Load the upper address bits + sll r13, 24, r13 // shift them to the top + + // + // Send out the IP Intr + // + stq_p r14, 0x40(r13) // Write to TLIPINTR reg + wmb // Push out the store + hw_rei + + +// cflush - PALcode for CFLUSH instruction +// +// SYS_CFLUSH // Entry: -// // R16 - contains the PFN of the page to be flushed // // Function: // Flush all Dstream caches of 1 entire page // -//- - +// + ALIGN_BLOCK EXPORT(sys_cflush) // #convert pfn to addr, and clean off <63:20> @@ -537,17 +361,17 @@ cflush_loop: subq r13, 1, r13 // decr counter mfpr r25, ev5__intid // Fetch level of interruptor - ldqp r31, 32*0(r12) // do a load - ldqp r31, 32*1(r12) // do next load + ldq_p r31, 32*0(r12) // do a load + ldq_p r31, 32*1(r12) // do next load - ldqp r31, 32*2(r12) // do next load - ldqp r31, 32*3(r12) // do next load + ldq_p r31, 32*2(r12) // do next load + ldq_p r31, 32*3(r12) // do next load - ldqp r31, 32*4(r12) // do next load - ldqp r31, 32*5(r12) // do next load + ldq_p r31, 32*4(r12) // do next load + ldq_p r31, 32*5(r12) // do next load - ldqp r31, 32*6(r12) // do next load - ldqp r31, 32*7(r12) // do next load + ldq_p r31, 32*6(r12) // do next load + ldq_p r31, 32*7(r12) // do next load mfpr r14, ev5__ipl // Fetch current level lda r12, (32*8)(r12) // skip to next cache block addr @@ -571,9 +395,8 @@ cflush_loop: ALIGN_BLOCK -// .sbttl "CSERVE- PALcode for CSERVE instruction" -//+ -// SYS$CSERVE +// +// sys_cserve - PALcode for CSERVE instruction // // Function: // Various functions for private use of console software @@ -584,9 +407,9 @@ cflush_loop: // // r0 = 0 unknown // -// r0 = 1 ldqp -// r0 = 2 stqp -// args, are as for normal STQP/LDQP in VMS PAL +// r0 = 1 ldq_p +// r0 = 2 stq_p +// args, are as for normal STQ_P/LDQ_P in VMS PAL // // r0 = 3 dump_tb's // r16 = detination PA to dump tb's to. @@ -594,12 +417,11 @@ cflush_loop: // r0<0> = 1, success // r0<0> = 0, failure, or option not supported // r0<63:1> = (generally 0, but may be function dependent) -// r0 - load data on ldqp +// r0 - load data on ldq_p +// // -//- EXPORT(sys_cserve) -#ifdef SIMOS /* taken from scrmax */ cmpeq r18, CSERVE_K_RD_IMPURE, r0 bne r0, Sys_Cserve_Rd_Impure @@ -623,45 +445,20 @@ Sys_Cserve_Jtopal: mtpr t8,exc_addr hw_rei - -#else /* SIMOS */ - - cmpeq r16, cserve_ldlp, r12 // check for ldqp - bne r12, 1f // br if - - cmpeq r16, cserve_stlp, r12 // check for stqp - bne r12, 2f // br if - - cmpeq r16, cserve_callback, r12 // check for callback entry - bne r12, csrv_callback // br if - - cmpeq r16, cserve_identify, r12 // check for callback entry - bne r12, csrv_identify // br if - - or r31, r31, r0 // set failure - nop // pad palshadow write - - hw_rei // and back we go -#endif /* SIMOS */ - -// ldqp + // ldq_p ALIGN_QUAD 1: - ldqp r0,0(r17) // get the data + ldq_p r0,0(r17) // get the data nop // pad palshadow write hw_rei // and back we go -// stqp + // stq_p ALIGN_QUAD 2: - stqp r18, 0(r17) // store the data -#ifdef SIMOS + stq_p r18, 0(r17) // store the data lda r0,17(r31) // bogus -#else - lda r0, CSERVE_SUCCESS(r31) // set success -#endif hw_rei // and back we go @@ -675,7 +472,7 @@ csrv_callback: csrv_identify: mfpr r0, pal_base - ldqp r0, 8(r0) + ldq_p r0, 8(r0) hw_rei @@ -692,7 +489,7 @@ csrv_identify: subq r0, 1, r0 // decrement loop counter nop // Pad - no Mbox instr in cycle after mfpr - stqp r12, 0(r16) // store out PTE + stq_p r12, 0(r16) // store out PTE addq r16, 8 ,r16 // increment pointer bne r0, 1b @@ -708,7 +505,7 @@ csrv_identify: subq r0, 1, r0 // decrement loop counter nop // - stqp r12, 0(r16) // store out PTE + stq_p r12, 0(r16) // store out PTE addq r16, 8 ,r16 // increment pointer bne r0, 2b @@ -717,10 +514,8 @@ csrv_identify: hw_rei // and back we go -// .sbttl "SYS$INTERRUPT - Interrupt processing code" - -//+ -// SYS$INTERRUPT +// +// SYS_INTERRUPT - Interrupt processing code // // Current state: // Stack is pushed @@ -730,45 +525,40 @@ csrv_identify: // r25 - ISR // r16, r17, r18 - available // -//- - - +// EXPORT(sys_interrupt) - cmpeq r13, 31, r12 - bne r12, sys_int_mchk_or_crd // Check for level 31 interrupt (machine check or crd) + cmpeq r13, 31, r12 // Check for level 31 interrupt + bne r12, sys_int_mchk_or_crd // machine check or crd - cmpeq r13, 30, r12 - bne r12, sys_int_powerfail // Check for level 30 interrupt (powerfail) + cmpeq r13, 30, r12 // Check for level 30 interrupt + bne r12, sys_int_powerfail // powerfail - cmpeq r13, 29, r12 - bne r12, sys_int_perf_cnt // Check for level 29 interrupt (performance counters) + cmpeq r13, 29, r12 // Check for level 29 interrupt + bne r12, sys_int_perf_cnt // performance counters - cmpeq r13, 23, r12 - bne r12, sys_int_23 // Check for level 23 interrupt + cmpeq r13, 23, r12 // Check for level 23 interrupt + bne r12, sys_int_23 // IPI in Tsunami - cmpeq r13, 22, r12 - bne r12, sys_int_22 // Check for level 22 interrupt (might be - // interprocessor or timer interrupt) + cmpeq r13, 22, r12 // Check for level 22 interrupt + bne r12, sys_int_22 // timer interrupt - cmpeq r13, 21, r12 - bne r12, sys_int_21 // Check for level 21 interrupt + cmpeq r13, 21, r12 // Check for level 21 interrupt + bne r12, sys_int_21 // I/O - cmpeq r13, 20, r12 - bne r12, sys_int_20 // Check for level 20 interrupt (might be corrected - // system error interrupt) + cmpeq r13, 20, r12 // Check for level 20 interrupt + bne r12, sys_int_20 // system error interrupt + // (might be corrected) - mfpr r14, exc_addr // ooops, something is wrong - br r31, pal_pal_bug_check_from_int + mfpr r14, exc_addr // ooops, something is wrong + br r31, pal_pal_bug_check_from_int - - -//+ -//sys$int_2* +// +//sys_int_2* // Routines to handle device interrupts at IPL 23-20. -// System specific method to ack/clear the interrupt, detect passive release, -// detect interprocessor (22), interval clock (22), corrected -// system error (20) +// System specific method to ack/clear the interrupt, detect passive +// release, detect interprocessor (22), interval clock (22), corrected +// system error (20) // // Current state: // Stack is pushed @@ -783,7 +573,136 @@ EXPORT(sys_interrupt) // a1/r17 - contains interrupt vector // exit to ent_int address // -//- +// + +#if defined(TSUNAMI) || defined(BIG_TSUNAMI) + ALIGN_BRANCH +sys_int_23: + or r31,0,r16 // IPI interrupt A0 = 0 + lda r12,0xf01(r31) // build up an address for the MISC register + sll r12,16,r12 + lda r12,0xa000(r12) + sll r12,16,r12 + lda r12,IPIR_addr(r12) + + mfpr r10, pt_whami // get CPU ID + extbl r10, 1, r10 // Isolate just whami bits + or r31,0x1,r14 // load r14 with bit to clear + sll r14,r10,r14 // left shift by CPU ID + sll r14,IPIR_shift,r14 + stq_p r14, 0(r12) // clear the ipi interrupt + + br r31, pal_post_interrupt // Notify the OS + + + ALIGN_BRANCH +sys_int_22: + or r31,1,r16 // a0 means it is a clock interrupt + lda r12,0xf01(r31) // build up an address for the MISC register + sll r12,16,r12 + lda r12,0xa000(r12) + sll r12,16,r12 + lda r12,RTC_addr(r12) + + mfpr r10, pt_whami // get CPU ID + extbl r10, 1, r10 // Isolate just whami bits + or r31,0x1,r14 // load r14 with bit to clear + sll r14,r10,r14 // left shift by CPU ID + sll r14,RTC_shift,r14 // put the bits in the right position + stq_p r14, 0(r12) // clear the rtc interrupt + + br r31, pal_post_interrupt // Tell the OS + + + ALIGN_BRANCH +sys_int_20: + Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx + srl r13, 12, r13 // shift down to examine IPL15 + + Intr_Find_TIOP(r13,r14) + beq r14, 1f + + Get_TLSB_Node_Address(r14,r10) + lda r10, 0xa40(r10) // Get base TLILID address + + ldl_p r13, 0(r10) // Read the TLILID register + bne r13, pal_post_dev_interrupt + beq r13, 1f + + and r13, 0x3, r10 // check for PCIA bits + beq r10, pal_post_dev_interrupt // done if nothing set + save_pcia_intr(1) + br r31, pal_post_dev_interrupt // + +1: lda r16, osfint_c_passrel(r31) // passive release + br r31, pal_post_interrupt // + + + ALIGN_BRANCH +sys_int_21: + + lda r12,0xf01(r31) // calculate DIRn address + sll r12,32,r12 + ldah r13,DIR_addr(r31) + sll r13,8,r13 + bis r12,r13,r12 + + mfpr r13, pt_whami // get CPU ID + extbl r13, 1, r13 // Isolate just whami bits + +#ifdef BIG_TSUNAMI + sll r13,4,r13 + or r12,r13,r12 +#else + lda r12,0x0080(r12) + and r13,0x1,r14 // grab LSB and shift left 6 + sll r14,6,r14 + and r13,0x2,r10 // grabl LSB+1 and shift left 9 + sll r10,9,r10 + + mskbl r12,0,r12 // calculate DIRn address + lda r13,0x280(r31) + bis r12,r13,r12 + or r12,r14,r12 + or r12,r10,r12 +#endif + + ldq_p r13, 0(r12) // read DIRn + + or r31,1,r14 // set bit 55 (ISA Interrupt) + sll r14,55,r14 + + and r13, r14, r14 // check if bit 55 is set + lda r16,0x900(r31) // load offset for normal into r13 + beq r14, normal_int // if not compute the vector normally + + lda r16,0x800(r31) // replace with offset for pic + lda r12,0xf01(r31) // build an addr to access PIC + sll r12,32,r12 // at f01fc000000 + ldah r13,0xfc(r31) + sll r13,8,r13 + bis r12,r13,r12 + ldq_p r13,0x0020(r12) // read PIC1 ISR for interrupting dev + +normal_int: + //ctlz r13,r14 // count the number of leading zeros + // EV5 doesn't have ctlz, but we do, so lets use it + .byte 0x4e + .byte 0x06 + .byte 0xed + .byte 0x73 + lda r10,63(r31) + subq r10,r14,r17 // subtract from + + lda r13,0x10(r31) + mulq r17,r13,r17 // compute 0x900 + (0x10 * Highest DIRn-bit) + addq r17,r16,r17 + + or r31,3,r16 // a0 means it is a I/O interrupt + + br r31, pal_post_interrupt + +#elif defined(TLASER) ALIGN_BRANCH sys_int_23: Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx @@ -795,7 +714,7 @@ sys_int_23: Get_TLSB_Node_Address(r14,r10) lda r10, 0xac0(r10) // Get base TLILID address - ldlp r13, 0(r10) // Read the TLILID register + ldl_p r13, 0(r10) // Read the TLILID register bne r13, pal_post_dev_interrupt 1: lda r16, osfint_c_passrel(r31) // passive release @@ -819,19 +738,14 @@ sys_int_22: Get_TLSB_Node_Address(r14,r10) lda r10, 0xa80(r10) // Get base TLILID address - ldlp r13, 0(r10) // Read the TLILID register -#if turbo_pcia_intr_fix == 0 -// .if eq turbo_pcia_intr_fix + ldl_p r13, 0(r10) // Read the TLILID register bne r13, pal_post_dev_interrupt -//orig .iff beq r13, 1f and r13, 0x3, r10 // check for PCIA bits beq r10, pal_post_dev_interrupt // done if nothing set save_pcia_intr(2) br r31, pal_post_dev_interrupt // -// .endc -#endif /* turbo_pcia_intr_fix == 0 */ 1: lda r16, osfint_c_passrel(r31) // passive release br r31, pal_post_interrupt // @@ -848,19 +762,14 @@ sys_int_21: Get_TLSB_Node_Address(r14,r10) lda r10, 0xa40(r10) // Get base TLILID address - ldlp r13, 0(r10) // Read the TLILID register -#if turbo_pcia_intr_fix == 0 -//orig .if eq turbo_pcia_intr_fix + ldl_p r13, 0(r10) // Read the TLILID register bne r13, pal_post_dev_interrupt -//orig .iff beq r13, 1f and r13, 0x3, r10 // check for PCIA bits beq r10, pal_post_dev_interrupt // done if nothing set save_pcia_intr(1) br r31, pal_post_dev_interrupt // -// orig .endc -#endif /* turbo_pcia_intr_fix == 0 */ 1: lda r16, osfint_c_passrel(r31) // passive release br r31, pal_post_interrupt // @@ -881,20 +790,15 @@ sys_int_20: Get_TLSB_Node_Address(r14,r10) lda r10, 0xa00(r10) // Get base TLILID0 address - ldlp r13, 0(r10) // Read the TLILID register + ldl_p r13, 0(r10) // Read the TLILID register -#if turbo_pcia_intr_fix == 0 -// orig .if eq turbo_pcia_intr_fix bne r13, pal_post_dev_interrupt -// orig .iff beq r13, 1f and r13, 0x3, r10 // check for PCIA bits beq r10, pal_post_dev_interrupt // done if nothing set save_pcia_intr(0) br r31, pal_post_dev_interrupt // -// orig .endc -#endif 1: lda r16, osfint_c_passrel(r31) // passive release br r31, pal_post_interrupt // @@ -905,7 +809,7 @@ tlep_intim: sll r13, 28, r13 // shift up to top lda r13, (0x300)(r13) // full CSRC address (tlep watch csrc offset) - ldqp r13, 0(r13) // read CSRC + ldq_p r13, 0(r13) // read CSRC lda r13, 0x40(r31) // load Intim bit Write_TLINTRSUMx(r13,r10,r14) // clear the Intim bit @@ -928,14 +832,14 @@ tlep_uart0: lda r13, 0xffa(r31) // get upper GBUS address bits sll r13, 28, r13 // shift up to top - ldlp r14, 0x80(r13) // zero pointer register + ldl_p r14, 0x80(r13) // zero pointer register lda r14, 3(r31) // index to RR3 - stlp r14, 0x80(r13) // write pointer register + stl_p r14, 0x80(r13) // write pointer register mb mb - ldlp r14, 0x80(r13) // read RR3 + ldl_p r14, 0x80(r13) // read RR3 srl r14, 5, r10 // is it Channel A RX? blbs r10, uart0_rx @@ -963,7 +867,7 @@ uart0_rx: uart0_tx: lda r14, 0x28(r31) // Reset TX Int Pending code mb - stlp r14, 0x80(r13) // write Channel A WR0 + stl_p r14, 0x80(r13) // write Channel A WR0 mb lda r8, 0x6c0(r31) // UART0 TX vector @@ -979,7 +883,7 @@ uart1_rx: ALIGN_BRANCH uart1_tx: lda r14, 0x28(r31) // Reset TX Int Pending code - stlp r14, 0(r13) // write Channel B WR0 + stl_p r14, 0(r13) // write Channel B WR0 lda r8, 0x6d0(r31) // UART1 TX vector br r31, clear_duart0_int // clear tlintrsum and post @@ -1008,7 +912,7 @@ tlep_ecc: srl r14, 1, r14 // shift off cpu number Get_TLSB_Node_Address(r14,r10) // compute our nodespace address - ldlp r13, 0x40(r10) // read our TLBER WAS tlsb_tlber_offset + ldl_p r13, 0x40(r10) // read our TLBER WAS tlsb_tlber_offset srl r13, 17, r13 // shift down the CWDE/CRDE bits and r13, 3, r13 // mask the CWDE/CRDE bits @@ -1020,9 +924,9 @@ tlep_ecc: 1: lda r16, osfint_c_passrel(r31) // passive release +#endif // if TSUNAMI || BIG_TSUNAMI elif TLASER ALIGN_BRANCH - pal_post_dev_interrupt: or r13, r31, r17 // move vector to a1 or r31, osfint_c_dev, r16 // a0 signals IO device interrupt @@ -1038,11 +942,10 @@ pal_post_interrupt: hw_rei_spe - -//+ +// // sys_passive_release // Just pretend the interrupt never occurred. -//- +// EXPORT(sys_passive_release) mtpr r11, ev5__dtb_cm // Restore Mbox current mode for ps @@ -1051,20 +954,20 @@ EXPORT(sys_passive_release) mfpr r31, pt0 // Pad write to dtb_cm hw_rei -//+ -//sys_int_powerfail +// +// sys_int_powerfail // A powerfail interrupt has been detected. The stack has been pushed. // IPL and PS are updated as well. // // I'm not sure what to do here, I'm treating it as an IO device interrupt // -//- +// ALIGN_BLOCK sys_int_powerfail: lda r12, 0xffc4(r31) // get GBUS_MISCR address bits sll r12, 24, r12 // shift to proper position - ldqp r12, 0(r12) // read GBUS_MISCR + ldq_p r12, 0(r12) // read GBUS_MISCR srl r12, 5, r12 // isolate bit <5> blbc r12, 1f // if clear, no missed mchk @@ -1072,9 +975,9 @@ sys_int_powerfail: lda r13, 0xffc7(r31) // get GBUS$SERNUM address bits sll r13, 24, r13 // shift to proper position lda r14, 0x40(r31) // get bit <6> mask - ldqp r12, 0(r13) // read GBUS$SERNUM + ldq_p r12, 0(r13) // read GBUS$SERNUM or r12, r14, r14 // set bit <6> - stqp r14, 0(r13) // clear GBUS$SERNUM<6> + stq_p r14, 0(r13) // clear GBUS$SERNUM<6> mb mb @@ -1091,12 +994,12 @@ sys_int_powerfail: hw_rei_spe -//+ -// sys$halt_interrupt +// +// sys_halt_interrupt // A halt interrupt has been detected. Pass control to the console. // // -//- +// EXPORT(sys_halt_interrupt) ldah r13, 0x1800(r31) // load Halt/^PHalt bits @@ -1106,17 +1009,13 @@ sys_int_powerfail: nop nop mtpr r0, pt0 -#ifndef SIMOS - pvc_jsr updpcb, bsr=1 - bsr r0, pal_update_pcb // update the pcb -#endif lda r0, hlt_c_hw_halt(r31) // set halt code to hw halt br r31, sys_enter_console // enter the console -//+ -// sys$int_mchk_or_crd +// +// sys_int_mchk_or_crd // // Current state: // Stack is pushed @@ -1127,15 +1026,14 @@ sys_int_powerfail: // r25 - ISR // r16, r17, r18 - available // -//- +// ALIGN_BLOCK - sys_int_mchk_or_crd: srl r25, isr_v_mck, r12 blbs r12, sys_int_mchk - //+ + // // Not a Machine check interrupt, so must be an Internal CRD interrupt - //- + // mb //Clear out Cbox prior to reading IPRs srl r25, isr_v_crd, r13 //Check for CRD @@ -1154,8 +1052,8 @@ sys_merge_sys_corr: zap r14, 0xE0, r14 // Get Cbox IPR base mtpr r1, pt1 // save r0 for scratch - ldqp r0, ei_addr(r14) // EI_ADDR IPR - ldqp r10, fill_syn(r14) // FILL_SYN IPR + ldq_p r0, ei_addr(r14) // EI_ADDR IPR + ldq_p r10, fill_syn(r14) // FILL_SYN IPR bis r0, r10, r31 // Touch lds to make sure they complete before doing scrub blbs r12, 1f // no scrubbing for IRQ0 case @@ -1164,11 +1062,11 @@ sys_merge_sys_corr: // ld/st pair in scrub routine will have finished due // to ibox stall of stx_c. Don't need another mb. - ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN + ldq_p r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN or r8, r31, r12 // Must only be executed once in this flow, and must br r31, 2f // be after the scrub routine. -1: ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN +1: ldq_p r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN // For IRQ0 CRD case only - meaningless data. 2: mfpr r13, pt_mces // Get MCES @@ -1203,53 +1101,45 @@ sys_merge_sys_corr: lda r1, 3(r31) // Set retry and 2nd error flags sll r1, 30, r1 // Move to bits 31:30 of logout frame flag longword - stlp r1, mchk_crd_flag+4(r14) // store flag longword + stl_p r1, mchk_crd_flag+4(r14) // store flag longword br sys_crd_ack sys_crd_write_logout_frame: // should only be here if neither the pce or sce bits are set - //+ + // // Write the mchk code to the logout area - //- - stqp r9, mchk_crd_mchk_code(r14) + // + stq_p r9, mchk_crd_mchk_code(r14) - //+ + // // Write the first 2 quadwords of the logout area: - //- + // lda r1, 1(r31) // Set retry flag sll r1, 63, r9 // Move retry flag to bit 63 lda r1, mchk_crd_size(r9) // Combine retry flag and frame size - stqp r1, mchk_crd_flag(r14) // store flag/frame size - -#ifndef SIMOS - /* needed? bugnion */ - lda r1, mchk_crd_sys_base(r31) // sys offset - sll r1, 32, r1 - lda r1, mchk_crd_cpu_base(r1) // cpu offset - stqp r1, mchk_crd_offsets(r14) // store sys offset/cpu offset into logout frame + stq_p r1, mchk_crd_flag(r14) // store flag/frame size -#endif - //+ + // // Write error IPRs already fetched to the logout area - //- - stqp r0, mchk_crd_ei_addr(r14) - stqp r10, mchk_crd_fill_syn(r14) - stqp r8, mchk_crd_ei_stat(r14) - stqp r25, mchk_crd_isr(r14) - //+ + // + stq_p r0, mchk_crd_ei_addr(r14) + stq_p r10, mchk_crd_fill_syn(r14) + stq_p r8, mchk_crd_ei_stat(r14) + stq_p r25, mchk_crd_isr(r14) + // // Log system specific info here - //- + // crd_storeTLEP_: lda r1, 0xffc4(r31) // Get GBUS$MISCR address sll r1, 24, r1 - ldqp r1, 0(r1) // Read GBUS$MISCR + ldq_p r1, 0(r1) // Read GBUS$MISCR sll r1, 16, r1 // shift up to proper field mfpr r10, pt_whami // get our node id extbl r10, 1, r10 // shift to bit 0 or r1, r10, r1 // merge MISCR and WHAMI - stlp r1, mchk_crd_whami(r14) // write to crd logout area + stl_p r1, mchk_crd_whami(r14) // write to crd logout area srl r10, 1, r10 // shift off cpu number Get_TLSB_Node_Address(r10,r0) // compute our nodespace address @@ -1272,20 +1162,20 @@ sys_crd_ack: 5: srl r13, mces_v_dpc, r10 // logging enabled? 6: blbc r10, sys_crd_post_interrupt // logging enabled -- report it - // logging not enabled -- + // logging not enabled // Get base of the logout area. GET_IMPURE(r13) // addr of per-cpu impure area GET_ADDR(r13,(pal_logout_area+mchk_crd_base),r13) - ldlp r10, mchk_crd_rsvd(r13) // bump counter + ldl_p r10, mchk_crd_rsvd(r13) // bump counter addl r10, 1, r10 - stlp r10, mchk_crd_rsvd(r13) + stl_p r10, mchk_crd_rsvd(r13) mb br r31, sys_crd_dismiss_interrupt // just return - //+ + // // The stack is pushed. Load up a0,a1,a2 and vector via entInt // - //- + // ALIGN_BRANCH sys_crd_post_interrupt: @@ -1307,27 +1197,18 @@ sys_crd_post_interrupt: hw_rei_spe // done - //+ + // // The stack is pushed. Need to back out of it all. - //- + // sys_crd_dismiss_interrupt: br r31, Call_Pal_Rti -// .sbttl sys_crd_scrub_mem - - //+ - // - // sys_crd_scrub_mem - // called - // jsr r13, sys$crd_scrub_mem - // r0 = addr of cache block - // - //- - - - +// sys_crd_scrub_mem +// +// r0 = addr of cache block +// ALIGN_BLOCK // align for branch target sys_crd_scrub_mem: // now find error in memory, and attempt to scrub that cache block @@ -1335,37 +1216,37 @@ sys_crd_scrub_mem: // Only need to "touch" one quadword per octaword to accomplish the scrub srl r0, 39, r8 // get high bit of bad pa blbs r8, 1f // don't attempt fixup on IO space addrs - nop // needed to align the ldqpl to octaword boundary + nop // needed to align the ldq_pl to octaword boundary nop // " - ldqpl r8, 0(r0) // attempt to read the bad memory + ldq_p r8, 0(r0) // attempt to read the bad memory // location // (Note bits 63:40,3:0 of ei_addr // are set to 1, but as long as // we are doing a phys ref, should // be ok) - nop // Needed to keep the Ibox from swapping the ldqpl into E1 + nop // Needed to keep the Ibox from swapping the ldq_p into E1 - stqpc r8, 0(r0) // Store it back if it is still there. + stq_p r8, 0(r0) // Store it back if it is still there. // If store fails, location already // scrubbed by someone else - nop // needed to align the ldqpl to octaword boundary + nop // needed to align the ldq_p to octaword boundary lda r8, 0x20(r31) // flip bit 5 to touch next hexaword xor r8, r0, r0 - nop // needed to align the ldqpl to octaword boundary + nop // needed to align the ldq_p to octaword boundary nop // " - ldqpl r8, 0(r0) // attempt to read the bad memory + ldq_p r8, 0(r0) // attempt to read the bad memory // location // (Note bits 63:40,3:0 of ei_addr // are set to 1, but as long as // we are doing a phys ref, should // be ok) - nop // Needed to keep the Ibox from swapping the ldqpl into E1 + nop // Needed to keep the Ibox from swapping the ldq_p into E1 - stqpc r8, 0(r0) // Store it back if it is still there. + stq_p r8, 0(r0) // Store it back if it is still there. // If store fails, location already // scrubbed by someone else @@ -1379,8 +1260,9 @@ sys_crd_scrub_mem: 1: ret r31, (r13) // and back we go -// .sbttl "SYS$INT_MCHK - MCHK Interrupt code" -//+ +// +// sys_int_mchk - MCHK Interrupt code +// // Machine check interrupt from the system. Setup and join the // regular machine check flow. // On exit: @@ -1394,7 +1276,7 @@ sys_crd_scrub_mem: // pt_misc<31:16> - scb vector // r14 - base of Cbox IPRs in IO space // MCES<mchk> is set -//- +// ALIGN_BLOCK sys_int_mchk: lda r14, mchk_c_sys_hrd_error(r31) @@ -1429,33 +1311,15 @@ sys_int_mchk: mtpr r5, pt5 -#if beh_model -// .if ne beh_model - ldah r25, 0xC000(r31) // Get base of demon space - lda r25, 0x340(r25) // Add interrupt demon offset - - ldqp r13, 0(r25) // Read the control register - nop - - and r13, 0x10, r8 // For debug, check that the interrupt is expected - beq r8, interrupt_not_expected - - bic r13, 0x10, r13 - stqp r13, 0(r25) // Ack and clear the interrupt -// XXX bugnion pvc$violate 379 // stqp can't trap except replay. mt ipr only problem if mf same ipr in same shadow - .endc -#endif - mtpr r6, pt6 br r31, sys_mchk_collect_iprs // Join common machine check flow -// .sbttl "SYS$INT_PERF_CNT - Performance counter interrupt code" -//+ -//sys$int_perf_cnt // -// A performance counter interrupt has been detected. The stack has been pushed. -// IPL and PS are updated as well. +// sys_int_perf_cnt - Performance counter interrupt code +// +// A performance counter interrupt has been detected. The stack +// has been pushed. IPL and PS are updated as well. // // on exit to interrupt entry point ENTINT:: // a0 = osfint$c_perf @@ -1467,7 +1331,7 @@ sys_int_mchk: // generated for each counter that overflows) // // -//- +// ALIGN_BLOCK sys_int_perf_cnt: // Performance counter interrupt lda r17, scb_v_perfmon(r31) // a1 to interrupt vector @@ -1496,12 +1360,10 @@ sys_int_perf_cnt: // Performance counter interrupt - ALIGN_BLOCK -// .sbttl "System specific RESET code" -//+ -// RESET code -// On entry: -// r1 = pal_base +8 +// +// sys_reset - System specific RESET code +// On entry: +// r1 = pal_base +8 // // Entry state on trap: // r0 = whami @@ -1512,14 +1374,13 @@ sys_int_perf_cnt: // Performance counter interrupt // r6 = bc_ctl // r7 = bc_cnfg // -// Entry state on switch: -// r17 - new PC -// r18 - new PCBB -// r19 - new VPTB +// Entry state on switch: +// r17 - new PC +// r18 - new PCBB +// r19 - new VPTB // -//- -#if rax_mode==0 + ALIGN_BLOCK .globl sys_reset sys_reset: // mtpr r31, ic_flush_ctl // do not flush the icache - done by hardware before SROM load @@ -1536,21 +1397,16 @@ sys_reset: mtpr r0, pt1 // r0 is whami (unless we entered via swp) -//orig ldah r1, <<1@<icsr$v_sde-16>> ! <1@<icsr$v_fpe-16>> ! <2@<icsr$v_spe-16>>>(r31) ldah r1,(BIT(icsr_v_sde-16)|BIT(icsr_v_fpe-16)|BIT(icsr_v_spe-16+1))(zero) -#if disable_crd == 0 -// .if eq disable_crd bis r31, 1, r0 sll r0, icsr_v_crde, r0 // A 1 in iscr<corr_read_enable> or r0, r1, r1 // Set the bit -#endif mtpr r1, icsr // ICSR - Shadows enabled, Floating point enable, // super page enabled, correct read per assembly option // Mbox/Dcache init -//orig lda r1, <1@<mcsr$v_sp1>>(r31) lda r1,BIT(mcsr_v_sp1)(zero) mtpr r1, mcsr // MCSR - Super page enabled @@ -1572,7 +1428,7 @@ sys_reset: mtpr r31, ev5__ps // set new ps<cm>=0, Ibox copy mtpr r31, dtb_cm // set new ps<cm>=0, Mbox copy - // Create the PALtemp pt_intmask - + // Create the PALtemp pt_intmask // MAP: // OSF IPL EV5 internal IPL(hex) note // 0 0 @@ -1597,11 +1453,9 @@ sys_reset: // Unlock a bunch of chip internal IPRs mtpr r31, exc_sum // clear out exeception summary and exc_mask mfpr r31, va // unlock va, mmstat -//rig lda r8, <<1@icperr_stat$v_dpe> ! <1@icperr_stat$v_tpe> ! <1@icperr_stat$v_tmr>>(r31) lda r8,(BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(zero) mtpr r8, icperr_stat // Clear Icache parity error & timeout status -//orig lda r8, <<1@dcperr_stat$v_lock> ! <1@dcperr_stat$v_seo>>(r31) lda r8,(BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31) mtpr r8, dcperr_stat // Clear Dcache parity error status @@ -1644,12 +1498,21 @@ sys_reset: or r31, 1, r1 // get bogus scbb value mtpr r1, pt_scbb // load scbb mtpr r31, pt_prbr // clear out prbr -#ifdef SIMOS -// or zero,kludge_initial_pcbb,r1 - GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1) -#else - mfpr r1, pal_base -//orig sget_addr r1, (kludge_initial_pcbb-pal$base), r1, verify=0// get address for temp pcbb +#if defined(TSUNAMI) || defined(BIG_TSUNAMI) + // yes, this is ugly, but you figure out a better + // way to get the address of the kludge_initial_pcbb + // in r1 with an uncooperative assembler --ali + br r1, kludge_getpcb_addr + br r31, kludge_initial_pcbb +kludge_getpcb_addr: + ldq_p r19, 0(r1) + sll r19, 44, r19 + srl r19, 44, r19 + mulq r19,4,r19 + addq r19, r1, r1 + addq r1,4,r1 +#elif defined(TLASER) + // or zero,kludge_initial_pcbb,r1 GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1) #endif mtpr r1, pt_pcbb // load pcbb @@ -1661,154 +1524,17 @@ sys_reset: // Performance counters mtpr r31, pmctr -#if init_cbox != 0 -// .if ne init_cbox - // Only init the Scache and the Bcache if there have been no previous - // cacheable dstream loads or stores. - // - // Inputs: - // r5 - sc_ctl - // r6 - bc_ctl - // r7 - bc_cnfg - - ldah r0, 0xfff0(r31) - zap r0, 0xE0, r0 // Get Cbox IPR base - ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl -temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1> - lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode) - sll r20, 1, r20 -temp = 0x017441 // default bc_config - get_addr r21, temp, r31 // create default bc_config - lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl - -// XXX bugnion pvc$jsr scbcctl, bsr=1 - bsr r10, set_sc_bc_ctl - update_bc_ctl_shadow r6, r23 // update bc_ctl shadow using r6 as input// r23 gets adjusted impure pointer - store_reg1 bc_config, r7, r23, ipr=1 // update bc_config shadow in impure area -// .endc -#endif // Clear pmctr_ctl in impure area -#ifndef SIMOS - // can't assemble ??? - update_pmctr_ctl r31, r1 // clear pmctr_ctl // r1 trashed -#endif ldah r14, 0xfff0(r31) zap r14, 0xE0, r14 // Get Cbox IPR base -#ifndef SIMOS - ldqp r31, sc_stat(r14) // Clear sc_stat and sc_addr - ldqp r31, ei_stat(r14) - ldqp r31, ei_stat(r14) // Clear ei_stat, ei_addr, bc_tag_addr, fill_syn -#endif GET_IMPURE(r13) - stqpc r31, 0(r13) // Clear lock_flag + stq_p r31, 0(r13) // Clear lock_flag mfpr r0, pt0 // get entry type br r31, sys_enter_console // enter the cosole -#endif /* rax_mode == 0 */ - - - - -//.if ne rax_mode -#if rax_mode != 0 - - // For RAX: - // r0 - icsr at first, then used for cbox ipr base offset - // r2 - mcsr - // r3 - dc_mode - // r4 - maf_mode - // r5 - sc_ctl - // r6 - bc_ctl - // r7 - bc_cnfg - .globl sys_reset -sys_reset: - mtpr r31, ev5__dtb_cm // set mbox mode to kernel - mtpr r31, ev5__ps // set Ibox mode to kernel - E1 - - mtpr r0, ev5__icsr // Load ICSR - E1 - - mtpr r2, ev5__mcsr - mfpr r8, pal_base - - ldah r0, 0xfff0(r31) - zap r0, 0xE0, r0 // Get Cbox IPR base - - mtpr r31, ev5__itb_asn // clear asn - E1 - ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl - -temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1> - lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode) - sll r20, 1, r20 - -temp = 0x017441 // default bc_config - get_addr r21, temp, r31 // create default bc_config - lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl - -// XXX bugnion pvc$jsr scbcctl, bsr=1 - bsr r10, set_sc_bc_ctl - update_bc_ctl_shadow r6, r2 // initialize bc_ctl shadow// adjusted impure pointer in r2 - store_reg1 pmctr_ctl, r31, r2, ipr=1 // clear pmctr_ctl - store_reg1 bc_config, r7, r2, ipr=1 // initialize bc_config shadow - - mtpr r3, ev5__dc_mode // write dc_mode - mtpr r31, ev5__dc_flush // flush dcache - - mtpr r31, ev5__exc_sum // clear exc_sum - E1 - mtpr r31, ev5__exc_mask // clear exc_mask - E1 - - ldah r2, 4(r31) // For EXC_ADDR - mtpr r2, ev5__exc_addr // EXC_ADDR to 40000 (hex) - - mtpr r31, ev5__sirr // Clear SW interrupts (for ISP) - mtpr r4, ev5__maf_mode // write maf_mode - - mtpr r31, ev5__alt_mode // set alt_mode to kernel - mtpr r31, ev5__itb_ia // clear ITB - E1 - - lda r1, 0x1F(r31) // For IPL - mtpr r1, ev5__ipl // IPL to 1F - - mtpr r31, ev5__hwint_clr // clear hardware interrupts - mtpr r31, ev5__aster // disable AST interrupts - - mtpr r31, ev5__astrr // clear AST requests - mtpr r31, ev5__dtb_ia // clear dtb - - nop - mtpr r31, pt_trap - - srl r2, page_offset_size_bits, r9 // Start to make PTE for address 40000 - sll r9, 32, r9 - - lda r9, 0x7F01(r9) // Make PTE, V set, all RE set, all but UWE set - nop - - mtpr r9, dtb_pte // ACORE hack, load TB with 1-1 translation for address 40000 - mtpr r2, itb_tag // ACORE hack, load TB with 1-1 translation for address 40000 - - mtpr r2, dtb_tag - mtpr r9, itb_pte - - and r31, r31, r0 // clear deposited registers, note: r2 already overwritten - and r31, r31, r3 - - and r31, r31, r4 - and r31, r31, r5 - - and r31, r31, r6 - and r31, r31, r7 - - hw_rei //May need to be a rei_stall since - //we write to TB's above - //However, it currently works ok. (JH) - - -// .endc -#endif /*rax_mode != 0 */ - // swppal entry // r0 - pt_misc @@ -1823,12 +1549,12 @@ sys_reset_switch: rpcc r1 // get cyccounter - ldqp r22, osfpcb_q_fen(r18) // get new fen/pme - ldlp r23, osfpcb_l_cc(r18) // get cycle counter - ldlp r24, osfpcb_l_asn(r18) // get new asn + ldq_p r22, osfpcb_q_fen(r18) // get new fen/pme + ldl_p r23, osfpcb_l_cc(r18) // get cycle counter + ldl_p r24, osfpcb_l_asn(r18) // get new asn - ldqp r25, osfpcb_q_Mmptr(r18)// get new mmptr + ldq_p r25, osfpcb_q_Mmptr(r18)// get new mmptr sll r25, page_offset_size_bits, r25 // convert pfn to pa mtpr r25, pt_ptbr // load the new mmptr mtpr r18, pt_pcbb // set new pcbb @@ -1838,7 +1564,7 @@ sys_reset_switch: mtpr r19, mvptbr mtpr r19, ivptbr - ldqp r30, osfpcb_q_Usp(r18) // get new usp + ldq_p r30, osfpcb_q_Usp(r18) // get new usp mtpr r30, pt_usp // save usp sll r24, dtb_asn_v_asn, r8 @@ -1860,27 +1586,26 @@ sys_reset_switch: mtpr r1, cc // set new offset or r31, r31, r0 // set success - ldqp r30, osfpcb_q_Ksp(r18) // get new ksp + ldq_p r30, osfpcb_q_Ksp(r18) // get new ksp mfpr r31, pt0 // stall hw_rei_stall -// .sbttl "SYS_MACHINE_CHECK - Machine check PAL" - ALIGN_BLOCK -//+ -//sys$machine_check +// +//sys_machine_check - Machine check PAL // A machine_check trap has occurred. The Icache has been flushed. // -//- +// + ALIGN_BLOCK EXPORT(sys_machine_check) - // Need to fill up the refill buffer (32 instructions) and - // then flush the Icache again. - // Also, due to possible 2nd Cbox register file write for - // uncorrectable errors, no register file read or write for 7 cycles. + // Need to fill up the refill buffer (32 instructions) and + // then flush the Icache again. + // Also, due to possible 2nd Cbox register file write for + // uncorrectable errors, no register file read or write for 7 cycles. nop - mtpr r0, pt0 // Stash for scratch -- OK if Cbox overwrites r0 later - + mtpr r0, pt0 // Stash for scratch -- OK if Cbox overwrites + // r0 later nop nop @@ -1892,7 +1617,7 @@ EXPORT(sys_machine_check) nop nop - // 10 instructions// 5 cycles + // 10 instructions// 5 cycles nop nop @@ -1904,7 +1629,6 @@ EXPORT(sys_machine_check) lda r0, scb_v_procmchk(r31) // SCB vector mfpr r13, pt_mces // Get MCES sll r0, 16, r0 // Move SCBv to correct position -// bis r13, #<1@mces$v_mchk>, r14 // Set MCES<MCHK> bit bis r13, BIT(mces_v_mchk), r14 // Set MCES<MCHK> bit @@ -1942,21 +1666,21 @@ EXPORT(sys_machine_check) blbc r4, sys_mchk_collect_iprs // skip if no powerfail interrupt pending lda r4, 0xffc4(r31) // get GBUS$MISCR address bits sll r4, 24, r4 // shift to proper position - ldqp r4, 0(r4) // read GBUS$MISCR + ldq_p r4, 0(r4) // read GBUS$MISCR srl r4, 5, r4 // isolate bit <5> blbc r4, sys_mchk_collect_iprs // skip if already cleared // No missed CFAIL mchk lda r5, 0xffc7(r31) // get GBUS$SERNUM address bits sll r5, 24, r5 // shift to proper position lda r6, 0x40(r31) // get bit <6> mask - ldqp r4, 0(r5) // read GBUS$SERNUM + ldq_p r4, 0(r5) // read GBUS$SERNUM or r4, r6, r6 // set bit <6> - stqp r6, 0(r5) // clear GBUS$SERNUM<6> + stq_p r6, 0(r5) // clear GBUS$SERNUM<6> mb mb - //+ + // // Start to collect the IPRs. Common entry point for mchk flows. // // Current state: @@ -1973,7 +1697,7 @@ EXPORT(sys_machine_check) // r8, r9, r10 - available as all loads are physical // MCES<mchk> is set // - //- + // EXPORT(sys_mchk_collect_iprs) mb // MB before reading Scache IPRs @@ -1987,29 +1711,29 @@ EXPORT(sys_mchk_collect_iprs) nop nop - ldqp r9, sc_addr(r14) // SC_ADDR IPR + ldq_p r9, sc_addr(r14) // SC_ADDR IPR bis r9, r31, r31 // Touch ld to make sure it completes before // read of SC_STAT - ldqp r10, sc_stat(r14) // SC_STAT, also unlocks SC_ADDR + ldq_p r10, sc_stat(r14) // SC_STAT, also unlocks SC_ADDR - ldqp r12, ei_addr(r14) // EI_ADDR IPR - ldqp r13, bc_tag_addr(r14) // BC_TAG_ADDR IPR - ldqp r0, fill_syn(r14) // FILL_SYN IPR + ldq_p r12, ei_addr(r14) // EI_ADDR IPR + ldq_p r13, bc_tag_addr(r14) // BC_TAG_ADDR IPR + ldq_p r0, fill_syn(r14) // FILL_SYN IPR bis r12, r13, r31 // Touch lds to make sure they complete before reading EI_STAT bis r0, r0, r31 // Touch lds to make sure they complete before reading EI_STAT - ldqp r25, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN - ldqp r31, ei_stat(r14) // Read again to insure it is unlocked + ldq_p r25, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN + ldq_p r31, ei_stat(r14) // Read again to insure it is unlocked - //+ + // // Look for nonretryable cases // In this segment: // r5<0> = 1 means retryable // r4, r6, and r14 are available for scratch // - //- + // bis r31, r31, r5 // Clear local retryable flag @@ -2064,14 +1788,14 @@ EXPORT(sys_mchk_collect_iprs) - //+ + // // Look for retryable cases // In this segment: // r5<0> = 1 means retryable // r6 - holds the mchk code // r4 and r14 are available for scratch // - //- + // // Within the chip, the retryable cases are Istream errors @@ -2104,24 +1828,7 @@ EXPORT(sys_mchk_collect_iprs) cmovne r5, mchk_c_retryable_ird, r6 // Set mchk code - - // In the system, the retryable cases are ... - // (code here handles beh model read NXM) - -#if beh_model != 0 -// .if ne beh_model - ldah r4, 0xC000(r31) // Get base of demon space - lda r4, 0x550(r4) // Add NXM demon flag offset - - ldqp r4, 0(r4) // Read the demon register - lda r14, mchk_c_read_nxm(r31) - cmovlbs r4, r14, r6 // Set mchk code if read NXM - cmovlbs r4, 1, r4 - bis r4, r5, r5 // Accumulate retry bit -#endif - - - //+ + // // Write the logout frame // // Current state: @@ -2144,7 +1851,7 @@ EXPORT(sys_mchk_collect_iprs) // pt6 - saved r6 // pt10 - saved exc_addr // - //- + // sys_mchk_write_logout_frame: // Get base of the logout area. @@ -2155,141 +1862,53 @@ sys_mchk_write_logout_frame: sll r5, 63, r5 // Move retry flag to bit 63 lda r4, mchk_size(r5) // Combine retry flag and frame size - stqp r4, mchk_flag(r14) // store flag/frame size + stq_p r4, mchk_flag(r14) // store flag/frame size lda r4, mchk_sys_base(r31) // sys offset sll r4, 32, r4 lda r4, mchk_cpu_base(r4) // cpu offset - stqp r4, mchk_offsets(r14) // store sys offset/cpu offset into logout frame + stq_p r4, mchk_offsets(r14) // store sys offset/cpu offset into logout frame - //+ + // // Write the mchk code to the logout area // Write error IPRs already fetched to the logout area // Restore some GPRs from PALtemps - //- + // mfpr r5, pt5 - stqp r6, mchk_mchk_code(r14) + stq_p r6, mchk_mchk_code(r14) mfpr r4, pt4 - stqp r1, mchk_ic_perr_stat(r14) + stq_p r1, mchk_ic_perr_stat(r14) mfpr r6, pt6 - stqp r8, mchk_dc_perr_stat(r14) + stq_p r8, mchk_dc_perr_stat(r14) mfpr r1, pt1 - stqp r9, mchk_sc_addr(r14) - stqp r10, mchk_sc_stat(r14) - stqp r12, mchk_ei_addr(r14) - stqp r13, mchk_bc_tag_addr(r14) - stqp r0, mchk_fill_syn(r14) + stq_p r9, mchk_sc_addr(r14) + stq_p r10, mchk_sc_stat(r14) + stq_p r12, mchk_ei_addr(r14) + stq_p r13, mchk_bc_tag_addr(r14) + stq_p r0, mchk_fill_syn(r14) mfpr r0, pt0 sll r25, ei_stat_v_bc_tperr, r25 // Move EI_STAT status bits back to expected position // retrieve lower 28 bits again from ei_stat and restore before storing to logout frame ldah r13, 0xfff0(r31) zapnot r13, 0x1f, r13 - ldqp r13, ei_stat(r13) + ldq_p r13, ei_stat(r13) sll r13, 64-ei_stat_v_bc_tperr, r13 srl r13, 64-ei_stat_v_bc_tperr, r13 or r25, r13, r25 - stqp r25, mchk_ei_stat(r14) + stq_p r25, mchk_ei_stat(r14) - //+ + // // complete the CPU-specific part of the logout frame - //- - -#ifndef SIMOS - // cant' assemble.Where is the macro ? - mchk_logout mm_stat - mchk_logout va // Unlocks VA and MM_STAT - mchk_logout isr - mchk_logout icsr - mchk_logout pal_base - mchk_logout exc_mask - mchk_logout exc_sum -#endif + // ldah r13, 0xfff0(r31) zap r13, 0xE0, r13 // Get Cbox IPR base - ldqp r13, ld_lock(r13) // Get ld_lock IPR - stqp r13, mchk_ld_lock(r14) // and stash it in the frame - - //+ - // complete the PAL-specific part of the logout frame - //- -#ifdef vms - t = 0 - .repeat 24 - pt_mchk_logout \t - t = t + 1 - .endr -#endif -#ifndef SIMOS - //can't assemble ? - pt_mchk_logout 0 - pt_mchk_logout 1 - pt_mchk_logout 2 - pt_mchk_logout 3 - pt_mchk_logout 4 - pt_mchk_logout 5 - pt_mchk_logout 6 - pt_mchk_logout 7 - pt_mchk_logout 8 - pt_mchk_logout 9 - pt_mchk_logout 10 - pt_mchk_logout 11 - pt_mchk_logout 12 - pt_mchk_logout 13 - pt_mchk_logout 14 - pt_mchk_logout 15 - pt_mchk_logout 16 - pt_mchk_logout 17 - pt_mchk_logout 18 - pt_mchk_logout 19 - pt_mchk_logout 20 - pt_mchk_logout 21 - pt_mchk_logout 22 - pt_mchk_logout 23 -#endif + ldq_p r13, ld_lock(r13) // Get ld_lock IPR + stq_p r13, mchk_ld_lock(r14) // and stash it in the frame - - //+ - // Log system specific info here - //- - -#if alpha_fw != 0 -// .if ne alpha_fw -storeTLEP_: - lda r13, 0xffc4(r31) // Get GBUS$MISCR address - sll r13, 24, r13 - ldqp r13, 0(r13) // Read GBUS$MISCR - sll r13, 16, r13 // shift up to proper field - mfpr r8, pt_whami // get our node id - extbl r8, 1, r8 // shift to bit 0 - or r13, r8, r13 // merge MISCR and WHAMI - stlp r13, mchk$gbus(r14) // write to logout area - srl r8, 1, r8 // shift off cpu number - - Get_TLSB_Node_Address r8,r13 // compute our nodespace address - - OSFmchk_TLEPstore tldev, tlsb=1 - OSFmchk_TLEPstore tlber, tlsb=1, clr=1 - OSFmchk_TLEPstore tlcnr, tlsb=1 - OSFmchk_TLEPstore tlvid, tlsb=1 - OSFmchk_TLEPstore tlesr0, tlsb=1, clr=1 - OSFmchk_TLEPstore tlesr1, tlsb=1, clr=1 - OSFmchk_TLEPstore tlesr2, tlsb=1, clr=1 - OSFmchk_TLEPstore tlesr3, tlsb=1, clr=1 - OSFmchk_TLEPstore tlmodconfig - OSFmchk_TLEPstore tlepaerr, clr=1 - OSFmchk_TLEPstore tlepderr, clr=1 - OSFmchk_TLEPstore tlepmerr, clr=1 - OSFmchk_TLEPstore tlintrmask0 - OSFmchk_TLEPstore tlintrmask1 - OSFmchk_TLEPstore tlintrsum0 - OSFmchk_TLEPstore tlintrsum1 - OSFmchk_TLEPstore tlep_vmg -// .endc -#endif /*alpha_fw != 0 */ // Unlock IPRs lda r8, (BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31) mtpr r8, dcperr_stat // Clear Dcache parity error status @@ -2297,35 +1916,35 @@ storeTLEP_: lda r8, (BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(r31) mtpr r8, icperr_stat // Clear Icache parity error & timeout status -1: ldqp r8, mchk_ic_perr_stat(r14) // get ICPERR_STAT value +1: ldq_p r8, mchk_ic_perr_stat(r14) // get ICPERR_STAT value GET_ADDR(r0,0x1800,r31) // get ICPERR_STAT value and r0, r8, r0 // compare beq r0, 2f // check next case if nothing set lda r0, mchk_c_retryable_ird(r31) // set new MCHK code br r31, do_670 // setup new vector -2: ldqp r8, mchk_dc_perr_stat(r14) // get DCPERR_STAT value +2: ldq_p r8, mchk_dc_perr_stat(r14) // get DCPERR_STAT value GET_ADDR(r0,0x3f,r31) // get DCPERR_STAT value and r0, r8, r0 // compare beq r0, 3f // check next case if nothing set lda r0, mchk_c_dcperr(r31) // set new MCHK code br r31, do_670 // setup new vector -3: ldqp r8, mchk_sc_stat(r14) // get SC_STAT value +3: ldq_p r8, mchk_sc_stat(r14) // get SC_STAT value GET_ADDR(r0,0x107ff,r31) // get SC_STAT value and r0, r8, r0 // compare beq r0, 4f // check next case if nothing set lda r0, mchk_c_scperr(r31) // set new MCHK code br r31, do_670 // setup new vector -4: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value +4: ldq_p r8, mchk_ei_stat(r14) // get EI_STAT value GET_ADDR(r0,0x30000000,r31) // get EI_STAT value and r0, r8, r0 // compare beq r0, 5f // check next case if nothing set lda r0, mchk_c_bcperr(r31) // set new MCHK code br r31, do_670 // setup new vector -5: ldlp r8, mchk_tlber(r14) // get TLBER value +5: ldl_p r8, mchk_tlber(r14) // get TLBER value GET_ADDR(r0,0xfe01,r31) // get high TLBER mask value sll r0, 16, r0 // shift into proper position GET_ADDR(r1,0x03ff,r31) // get low TLBER mask value @@ -2335,28 +1954,28 @@ storeTLEP_: GET_ADDR(r0, 0xfff0, r31) // set new MCHK code br r31, do_660 // setup new vector -6: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value +6: ldl_p r8, mchk_tlepaerr(r14) // get TLEPAERR value GET_ADDR(r0,0xff7f,r31) // get TLEPAERR mask value and r0, r8, r0 // compare beq r0, 7f // check next case if nothing set GET_ADDR(r0, 0xfffa, r31) // set new MCHK code br r31, do_660 // setup new vector -7: ldlp r8, mchk_tlepderr(r14) // get TLEPDERR value +7: ldl_p r8, mchk_tlepderr(r14) // get TLEPDERR value GET_ADDR(r0,0x7,r31) // get TLEPDERR mask value and r0, r8, r0 // compare beq r0, 8f // check next case if nothing set GET_ADDR(r0, 0xfffb, r31) // set new MCHK code br r31, do_660 // setup new vector -8: ldlp r8, mchk_tlepmerr(r14) // get TLEPMERR value +8: ldl_p r8, mchk_tlepmerr(r14) // get TLEPMERR value GET_ADDR(r0,0x3f,r31) // get TLEPMERR mask value and r0, r8, r0 // compare beq r0, 9f // check next case if nothing set GET_ADDR(r0, 0xfffc, r31) // set new MCHK code br r31, do_660 // setup new vector -9: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value +9: ldq_p r8, mchk_ei_stat(r14) // get EI_STAT value GET_ADDR(r0,0xb,r31) // get EI_STAT mask value sll r0, 32, r0 // shift to upper lw and r0, r8, r0 // compare @@ -2364,7 +1983,7 @@ storeTLEP_: GET_ADDR(r0,0xfffd,r31) // set new MCHK code br r31, do_660 // setup new vector -1: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value +1: ldl_p r8, mchk_tlepaerr(r14) // get TLEPAERR value GET_ADDR(r0,0x80,r31) // get TLEPAERR mask value and r0, r8, r0 // compare beq r0, cont_logout_frame // check next case if nothing set @@ -2382,7 +2001,7 @@ do_6x0_cont: bic r1, r4, r1 // clear out old vector field or r1, r8, r1 // merge in new vector mtpr r1, pt_misc // save new vector field - stlp r0, mchk_mchk_code(r14) // save new mchk code + stl_p r0, mchk_mchk_code(r14) // save new mchk code cont_logout_frame: // Restore some GPRs from PALtemps @@ -2399,11 +2018,11 @@ cont_logout_frame: mtpr r31, exc_sum // Clear Exception Summary mfpr r25, pt10 // write exc_addr after arith_and_mchk to pickup new pc - stqp r25, mchk_exc_addr(r14) + stq_p r25, mchk_exc_addr(r14) - //+ + // // Set up the km trap - //- + // sys_post_mchk_trap: @@ -2458,10 +2077,10 @@ sys_post_mchk_trap: hw_rei_spe // out to interrupt dispatch routine - //+ + // // The stack is pushed. Load up a0,a1,a2 and vector via entInt // - //- + // ALIGN_BRANCH sys_mchk_stack_done: lda r16, osfint_c_mchk(r31) // flag as mchk/crd in a0 @@ -2487,36 +2106,27 @@ sys_cpu_mchk_not_retryable: -//+ -//sys$double_machine_check - a machine check was started, but MCES<MCHK> was +// +//sys_double_machine_check - a machine check was started, but MCES<MCHK> was // already set. We will now double machine check halt. // // pt0 - old R0 // -//+ +// EXPORT(sys_double_machine_check) -#ifndef SIMOS - pvc$jsr updpcb, bsr=1 - bsr r0, pal_update_pcb // update the pcb -#endif lda r0, hlt_c_dbl_mchk(r31) br r31, sys_enter_console -//+ -//sys$machine_check_while_in_pal - a machine check was started, exc_addr points to -// a PAL PC. We will now machine check halt. +// +// sys_machine_check_while_in_pal - a machine check was started, +// exc_addr points to a PAL PC. We will now machine check halt. // // pt0 - old R0 // -//+ +// sys_machine_check_while_in_pal: - stqp r12, mchk_exc_addr(r14) // exc_addr has not yet been written - -#ifndef SIMOS - pvc$jsr updpcb, bsr=1 - bsr r0, pal_update_pcb // update the pcb -#endif + stq_p r12, mchk_exc_addr(r14) // exc_addr has not yet been written lda r0, hlt_c_mchk_from_pal(r31) br r31, sys_enter_console @@ -2548,7 +2158,7 @@ sys_arith_and_mchk: ret r31, (r12) // return if no outstanding arithmetic error handle_arith_and_mchk: - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - + mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel // no virt ref for next 2 cycles mtpr r14, pt0 @@ -2594,11 +2204,7 @@ handle_arith_and_mchk: -// .sbttl "SYS$ENTER_CONSOLE - Common PALcode for ENTERING console" - - ALIGN_BLOCK - -// SYS$enter_console +// sys_enter_console - Common PALcode for ENTERING console // // Entry: // Entered when PAL wants to enter the console. @@ -2627,21 +2233,16 @@ handle_arith_and_mchk: // routine will have there data lost. The code below will save all // state, but will loose pt 0,4,5. // -//- +// + ALIGN_BLOCK EXPORT(sys_enter_console) mtpr r1, pt4 mtpr r3, pt5 -#ifdef SIMOS subq r31, 1, r1 sll r1, 42, r1 ldah r1, 1(r1) -#else /* SIMOS */ - lda r3, pal_enter_console_ptr(r31) //find stored vector - ldqp r1, 0(r3) -#endif /* SIMOS */ -#ifdef SIMOS /* taken from scrmax, seems like the obvious thing to do */ mtpr r1, exc_addr mfpr r1, pt4 @@ -2649,15 +2250,10 @@ EXPORT(sys_enter_console) STALL STALL hw_rei_stall -#else - pvc$violate 1007 - jmp r31, (r1) // off to common routine -#endif -// .sbttl "SYS$EXIT_CONSOLE - Common PALcode for ENTERING console" -//+ -// sys$exit_console +// +// sys_exit_console - Common PALcode for ENTERING console // // Entry: // Entered when console wants to reenter PAL. @@ -2673,103 +2269,27 @@ EXPORT(sys_enter_console) // // // -//- +// ALIGN_BLOCK sys_exit_console: - //Disable physical mode: -#if enable_physical_console != 0 -// .if ne enable_physical_console - mfpr r25, pt_ptbr - bic r25, 1, r25 // clear physical console flag - mtpr r25, pt_ptbr -#endif GET_IMPURE(r1) // clear lock and intr_flags prior to leaving console rc r31 // clear intr_flag // lock flag cleared by restore_state -#ifndef SIMOS - pvc$jsr rststa, bsr=1 - bsr r3, pal_restore_state // go restore all state - // note, R1 and R3 are NOT restored - // by restore_state. -#endif // TB's have been flushed - ldqp r3, (cns_gpr+(8*3))(r1) // restore r3 - ldqp r1, (cns_gpr+8)(r1) // restore r1 + ldq_p r3, (cns_gpr+(8*3))(r1) // restore r3 + ldq_p r1, (cns_gpr+8)(r1) // restore r1 hw_rei_stall // back to user -#if turbo_pcia_intr_fix != 0 -// .if ne turbo_pcia_intr_fix -check_pcia_intr: - mfpr r14, pt14 // fetch saved PCIA interrupt info - beq r14, check_done // don't bother checking if no info - mfpr r13, ipl // check the current IPL - bic r13, 3, r25 // isolate ipl<5:2> - cmpeq r25, 0x14, r25 // is it an I/O interrupt? - beq r25, check_done // no, return - and r13, 3, r25 // get I/O interrupt index - extbl r14, r25, r13 // extract info for this interrupt - beq r13, check_done // if no info, return - - // This is an RTI from a PCIA interrupt - lda r12, 1(r31) // get initial bit mask - sll r12, r25, r25 // shift to select interrupt index - zap r14, r25, r14 // clear out info from this interrupt - mtpr r14, pt14 // and save it - - and r13, 3, r25 // isolate HPC field - subq r25, 1, r25 // subtract 1 to get HPC number - srl r13, 2, r13 // generate base register address - sll r13, 6, r13 // get slot/hose address bits - lda r13, 0x38(r13) // insert other high bits - sll r13, 28, r13 // shift high bits into position - - // Read the IPROGx register - sll r25, 21, r14 // HPC address bit position - or r13, r14, r14 // add in upper bits - lda r14, 0x400(r14) // add in lower bits - ldqp r14, 0(r14) // read IPROG - srl r14, 4, r12 // check the In Progress bit - blbc r12, 1f // skip if none in progress - and r14, 0xf, r14 // isolate interrupt source - lda r12, 1(r31) // make initial mask - sll r12, r14, r14 // shift to make new intr source mask - br r31, 2f - // Write the SMPLIRQx register -1: or r31, r31, r14 // default interrupt source mask -2: GET_ADDR(r12, 0xffff, r31) // default SMPLIRQx data - bic r12, r14, r12 // clear any interrupts in progres -//orig lda r14, <0xbffc@-2>(r31) // get register address bits - lda r14,(0xbffc>>2)(r31) - - sll r14, 10, r14 // shift into position - or r14, r13, r14 // add in upper bits - sll r25, 8, r25 // shift HPC number into position - or r14, r25, r14 // add in lower bits - stqp r12, 0(r14) // write SMPLIRQx register - mb - ldqp r12, 0(r14) // read it back - bis r12, r12, r12 // touch register to insure completion - -check_done: // do these now and return - lda r25, osfsf_c_size(sp) // get updated sp - bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr - br r31, pcia_check_return -#endif - -// .sbttl KLUDGE_INITIAL_PCBB - PCB for Boot use only +// kludge_initial_pcbb - PCB for Boot use only ALIGN_128 - +.globl kludge_initial_pcbb kludge_initial_pcbb: // PCB is 128 bytes long -// .repeat 16 -// .quad 0 -// .endr - nop nop nop @@ -2790,19 +2310,22 @@ kludge_initial_pcbb: // PCB is 128 bytes long nop nop -// .sbttl "SET_SC_BC_CTL subroutine" + +// SET_SC_BC_CTL subroutine // -// Subroutine to set the SC_CTL, BC_CONFIG, and BC_CTL registers and flush the Scache -// There must be no outstanding memory references -- istream or dstream -- when -// these registers are written. EV5 prefetcher is difficult to turn off. So, -// this routine needs to be exactly 32 instructions long// the final jmp must -// be in the last octaword of a page (prefetcher doesn't go across page) +// Subroutine to set the SC_CTL, BC_CONFIG, and BC_CTL registers and +// flush the Scache +// There must be no outstanding memory references -- istream or +// dstream -- when these registers are written. EV5 prefetcher is +// difficult to turn off. So, this routine needs to be exactly 32 +// instructions long// the final jmp must be in the last octaword of a +// page (prefetcher doesn't go across page) // // // Register expecations: // r0 base address of CBOX iprs -// r5 value to set sc_ctl to (flush bit is added in) -// r6 value to set bc_ctl to +// r5 value to set sc_ctl to (flush bit is added in) +// r6 value to set bc_ctl to // r7 value to set bc_config to // r10 return address // r19 old sc_ctl value @@ -2810,63 +2333,9 @@ kludge_initial_pcbb: // PCB is 128 bytes long // r21 old value of bc_config // r23 flush scache flag // Register usage: -// r17 sc_ctl with flush bit cleared +// r17 sc_ctl with flush bit cleared // r22 loop address // // -#ifndef SIMOS - align_page <32*4> // puts start of routine at next page boundary minus 32 longwords. -#endif - set_sc_bc_ctl: - -#ifndef SIMOS - br r22, sc_ctl_loop //this branch must be in the same 4 instruction block as it's dest -sc_ctl_loop: -// XXX bugnion pvc$jsr scloop, dest=1 - mb - mb - - bis r5, r23, r5 //r5 <- same sc_ctl with flush bit set (if flag set in r23) - - stqp r19, ev5__sc_ctl(r0) // write sc_ctl - stqp r20, ev5__bc_ctl(r0) // write bc_ctl - bis r31, r6, r20 // update r20 with new bc_ctl for 2nd time through loop - stqp r21, bc_config(r0) // write bc_config register - bis r31, r7, r21 // update r21 with new bc_config for 2nd time through loop - - bic r19, BIT(sc_ctl_v_sc_flush), r17 //r17 <- same sc_ctl without flush bit set - //NOTE: only works because flush bit is in lower 16 bits - - wmb // don't merge with other writes - stqp r17, ev5__sc_ctl(r0) // write sc_ctl without flush bit - ldqp r17, ev5__sc_ctl(r0) // read sc_ctl - bis r17, r17, r17 // stall until the data comes back - bis r31, r5, r19 // update r19 with new sc_ctl for 2nd time through loop - - // fill with requisite number of nops (unops ok) to make exactly 32 instructions in loop - t = 0 - .repeat 15 - unop - t = t + 1 - .endr - $opdef mnemonic= myjmp, - - format= <custom=iregister, iregister, branch_offset>, - - encoding= <26:31=0x1A, 21:25=%OP1,16:20=%OP2,14:15=0x00,0:13=%op3> - -// XXXbugnion pvc$jsr scloop - myjmp r22,r22,sc_ctl_loop // first time, jump to sc_ctl_loop (hint will cause prefetcher to go to loop instead - // of straight) // r22 gets sc_ctl_done - // 2nd time, code continues at sc_ctl_done (I hope) -sc_ctl_done: -// XXX bugnion pvc$jsr scloop, dest=1 -// XXX bugnion pvc$jsr scbcctl -#endif /*SIMOS*/ ret r31, (r10) // return to where we came from - - -.end - - - - diff --git a/system/alpha/palcode/platform_m5.S b/system/alpha/palcode/platform_m5.S deleted file mode 100644 index 6c060f2ff..000000000 --- a/system/alpha/palcode/platform_m5.S +++ /dev/null @@ -1,2802 +0,0 @@ -/* - * Copyright (c) 2003, 2004, 2005 - * The Regents of The University of Michigan - * All Rights Reserved - * - * This code is part of the M5 simulator, developed by Nathan Binkert, - * Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions - * from Ron Dreslinski, Dave Greene, Lisa Hsu, Ali Saidi, and Andrew - * Schultz. - * - * Permission is granted to use, copy, create derivative works and - * redistribute this software and such derivative works for any - * purpose, so long as the copyright notice above, this grant of - * permission, and the disclaimer below appear in all copies made; and - * so long as the name of The University of Michigan is not used in - * any advertising or publicity pertaining to the use or distribution - * of this software without specific, written prior authorization. - * - * THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE - * UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND - * WITHOUT WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER - * EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE. THE REGENTS OF THE UNIVERSITY OF MICHIGAN SHALL NOT BE - * LIABLE FOR ANY DAMAGES, INCLUDING DIRECT, SPECIAL, INDIRECT, - * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WITH RESPECT TO ANY CLAIM - * ARISING OUT OF OR IN CONNECTION WITH THE USE OF THE SOFTWARE, EVEN - * IF IT HAS BEEN OR IS HEREAFTER ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGES. - */ -/* -Copyright 1993 Hewlett-Packard Development Company, L.P. - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies -of the Software, and to permit persons to whom the Software is furnished to do -so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -// build_fixed_image: not sure what means -// real_mm to be replaced during rewrite -// remove_save_state remove_restore_state can be remooved to save space ?? - - -#define egore 0 -#define acore 0 -#define beh_model 0 -#define ev5_p2 1 -#define ev5_p1 0 -#define ldvpte_bug_fix 1 -#define spe_fix 0 -#define osf_chm_fix 0 -#define build_fixed_image 0 -#define enable_p4_fixups 0 -#define osf_svmin 1 -#define enable_physical_console 0 -#define fill_err_hack 0 -#define icflush_on_tbix 0 -#define max_cpuid 1 -#define perfmon_debug 0 -#define rax_mode 0 - -#define hw_rei_spe hw_rei - -#include "ev5_defs.h" -#include "ev5_impure.h" -#include "ev5_alpha_defs.h" -#include "ev5_paldef.h" -#include "ev5_osfalpha_defs.h" -#include "fromHudsonMacros.h" -#include "fromHudsonOsf.h" -#include "dc21164FromGasSources.h" -#include "cserve.h" -#include "tlaser.h" - -#define ldlp ldl_p -#define ldqp ldq_p - -#define stlp stl_p -#define stqp stq_p -#define stqpc stqp - -#ifdef SIMOS -#define ldqpl ldq_p -#define sdqpl sdq_p -#else -<--bomb> -#endif - -#define pt_entInt pt_entint -#define pt_entArith pt_entarith -#define mchk_size ((mchk_cpu_base + 7 + 8) &0xfff8) -#define mchk_flag CNS_Q_FLAG -#define mchk_sys_base 56 -#define mchk_cpu_base (CNS_Q_LD_LOCK + 8) -#define mchk_offsets CNS_Q_EXC_ADDR -#define mchk_mchk_code 8 -#define mchk_ic_perr_stat CNS_Q_ICPERR_STAT -#define mchk_dc_perr_stat CNS_Q_DCPERR_STAT -#define mchk_sc_addr CNS_Q_SC_ADDR -#define mchk_sc_stat CNS_Q_SC_STAT -#define mchk_ei_addr CNS_Q_EI_ADDR -#define mchk_bc_tag_addr CNS_Q_BC_TAG_ADDR -#define mchk_fill_syn CNS_Q_FILL_SYN -#define mchk_ei_stat CNS_Q_EI_STAT -#define mchk_exc_addr CNS_Q_EXC_ADDR -#define mchk_ld_lock CNS_Q_LD_LOCK -#define osfpcb_q_Ksp pcb_q_ksp -#define pal_impure_common_size ((0x200 + 7) & 0xfff8) - -#ifdef BIG_TSUNAMI -#define MAXPROC 0x3f -#define IPIQ_addr 0x800 -#define IPIQ_shift 0 -#define IPIR_addr 0x840 -#define IPIR_shift 0 -#define RTC_addr 0x880 -#define RTC_shift 0 -#define DIR_addr 0xa2 -#else -#define MAXPROC 0x3 -#define IPIQ_addr 0x080 -#define IPIQ_shift 12 -#define IPIR_addr 0x080 -#define IPIR_shift 8 -#define RTC_addr 0x080 -#define RTC_shift 4 -#define DIR_addr 0xa0 -#endif - -#define ALIGN_BLOCK \ - .align 5 - -#define ALIGN_BRANCH \ - .align 3 - -#define EXPORT(_x) \ - .align 5; \ - .globl _x; \ -_x: - -// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX -// XXX the following is 'made up' -// XXX bugnion - -// XXX bugnion not sure how to align 'quad' -#define ALIGN_QUAD \ - .align 3 - -#define ALIGN_128 \ - .align 7 - - -#define GET_IMPURE(_r) mfpr _r,pt_impure -#define GET_ADDR(_r1,_off,_r2) lda _r1,_off(_r2) - - -#define BIT(_x) (1<<(_x)) - - -// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX -// XXX back to original code - -// .sbttl "System specific code - beh model version" - -// -// Entry points -// SYS$CFLUSH - Cache flush -// SYS$CSERVE - Console service -// SYS$WRIPIR - interprocessor interrupts -// SYS$HALT_INTERRUPT - Halt interrupt -// SYS$PASSIVE_RELEASE - Interrupt, passive release -// SYS$INTERRUPT - Interrupt -// SYS$RESET - Reset -// SYS$ENTER_CONSOLE - -// -// Macro to read TLINTRSUMx -// -// Based on the CPU_NUMBER, read either the TLINTRSUM0 or TLINTRSUM1 register -// -// Assumed register usage: -// rsum TLINTRSUMx contents -// raddr node space address -// scratch scratch register - - -// .macro Read_TLINTRSUMx rsum, raddr, scratch, ?label1, ?label2 -// -// nop -// mfpr 'scratch', pt_whami // Get our whami (VID) -// -// extbl 'scratch', #1, 'scratch' // shift down to bit 0 -// lda 'raddr', ^xff88(r31) // Get base node space address bits -// -// sll 'raddr', #24, 'raddr' // Shift up to proper position -// srl 'scratch', #1, 'rsum' // Shift off the cpu number -// -// sll 'rsum', #22, 'rsum' // Get our node offset -// addq 'raddr', 'rsum', 'raddr' // Get our base node space address -// -// blbs 'scratch', label1 -// lda 'raddr', <tlep$tlintrsum0_offset>('raddr') -// -// br r31, label2 -//label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr') -// -//label2: ldlp 'rsum', 0('raddr') // read the right tlintrsum reg -//.endm - -#define Read_TLINTRSUMx(_rsum,_raddr,_scratch) \ - nop; \ - mfpr _scratch,pt_whami; \ - extbl _scratch,1,_scratch; \ - lda _raddr,0xff88(zero); \ - sll _raddr,24,_raddr; \ - srl _scratch,1,_rsum; \ - sll _rsum,22,_rsum; \ - addq _raddr,_rsum,_raddr; \ - blbs _scratch,1f; \ - lda _raddr,0x1180(_raddr); \ - br r31,2f; \ -1: \ - lda _raddr,0x11c0(_raddr); \ -2: ldlp _rsum,0(_raddr) - - - -// -// Macro to write TLINTRSUMx -// -// Based on the CPU_NUMBER, write either the TLINTRSUM0 or TLINTRSUM1 register -// -// Assumed register usage: -// rsum TLINTRSUMx write data -// raddr node space address -// scratch scratch register - -// .macro Write_TLINTRSUMx rsum, raddr, whami, ?label1, ?label2 -// -// nop -// mfpr 'whami', pt_whami // Get our whami (VID) -// -// extbl 'whami', #1, 'whami' // shift down to bit 0 -// lda 'raddr', ^xff88(r31) // Get base node space address bits -// -// sll 'raddr', #24, 'raddr' // Shift up to proper position -// blbs 'whami', label1 -// -// lda 'raddr', <tlep$tlintrsum0_offset>('raddr') -// br r31, label2 -// -// label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr') -// label2: srl 'whami', #1, 'whami' // Shift off the cpu number -// -// sll 'whami', #22, 'whami' // Get our node offset -// addq 'raddr', 'whami', 'raddr' // Get our base node space address -// -// mb -// stqp 'rsum', 0('raddr') // write the right tlintrsum reg -// mb -// ldqp 'rsum', 0('raddr') // dummy read to tlintrsum -// bis 'rsum', 'rsum', 'rsum' // needed to complete the ldqp above -jpo -// .endm - - -#define Write_TLINTRSUMx(_rsum,_raddr,_whami) \ - nop; \ - mfpr _whami,pt_whami; \ - extbl _whami,1,_whami; \ - lda _raddr,0xff88(zero); \ - sll _raddr,24,_raddr; \ - blbs _whami,1f; \ - lda _raddr,0x1180(_raddr);\ - br zero,2f; \ -1: lda _raddr,0x11c0(_raddr);\ -2: srl _whami,1,_whami; \ - addq _raddr,_whami,_raddr; \ - mb; \ - stqp _rsum,0(_raddr); \ - ldqp _rsum,0(_raddr); \ - bis _rsum,_rsum,_rsum - - -// -// Macro to determine highest priority TIOP Node ID from interrupt pending mask -// -// Assumed register usage: -// rmask - TLINTRSUMx contents, shifted to isolate IOx bits -// rid - TLSB Node ID of highest TIOP - -//.macro Intr_Find_TIOP rmask, rid, ?l1, ?l2, ?l3, ?l4, ?l5, ?l6 -// srl 'rmask', #4, 'rid' // check IOP8 -// blbc 'rid', l1 // not IOP8 -// -// lda 'rid', 8(r31) // IOP8 -// br r31, l6 -// -// l1: srl 'rmask', #3, 'rid' // check IOP7 -// blbc 'rid', l2 // not IOP7 -// -// lda 'rid', 7(r31) // IOP7 -// br r31, l6 -// -// l2: srl 'rmask', #2, 'rid' // check IOP6 -// blbc 'rid', l3 // not IOP6 -// -// lda 'rid', 6(r31) // IOP6 -// br r31, l6 -// -// l3: srl 'rmask', #1, 'rid' // check IOP5 -// blbc 'rid', l4 // not IOP5 -// -// lda 'rid', 5(r31) // IOP5 -// br r31, l6 -// -// l4: srl 'rmask', #0, 'rid' // check IOP4 -// blbc 'rid', l5 // not IOP4 -// -// lda r14, 4(r31) // IOP4 -// br r31, l6 -// -// l5: lda r14, 0(r31) // passive release -// l6: -// .endm - - -#define Intr_Find_TIOP(_rmask,_rid) \ - srl _rmask,3,_rid; \ - blbc _rid,1f; \ - lda _rid,8(zero); \ - br zero,6f; \ -1: srl _rmask,3,_rid; \ - blbc _rid, 2f; \ - lda _rid, 7(r31); \ - br r31, 6f; \ -2: srl _rmask, 2, _rid; \ - blbc _rid, 3f; \ - lda _rid, 6(r31); \ - br r31, 6f; \ -3: srl _rmask, 1, _rid; \ - blbc _rid, 4f; \ - lda _rid, 5(r31); \ - br r31, 6f; \ -4: srl _rmask, 0, _rid; \ - blbc _rid, 5f; \ - lda r14, 4(r31); \ - br r31, 6f; \ -5: lda r14, 0(r31); \ -6: - - - - -// -// Macro to calculate base node space address for given node id -// -// Assumed register usage: -// rid - TLSB node id -// raddr - base node space address - -//.macro Get_TLSB_Node_Address rid, raddr -// sll 'rid', #22, 'rid' // Get offset of IOP node -// lda 'raddr', ^xff88(r31) // Get base node space address bits -// -// sll 'raddr', #24, 'raddr' // Shift up to proper position -// addq 'raddr', 'rid', 'raddr' // Get TIOP node space address -// .iif ne turbo_pcia_intr_fix, srl 'rid', #22, 'rid' // Restore IOP node id -//.endm - - -#define turbo_pcia_intr_fix 0 - - -#if turbo_pcia_intr_fix != 0 -#define Get_TLSB_Node_Address(_rid,_raddr) \ - sll _rid,22,_rid; \ - lda _raddr,0xff88(zero); \ - sll _raddr,24,_raddr; \ - addq _raddr,_rid,_raddr; \ - srl _rid,22,_rid -#else -#define Get_TLSB_Node_Address(_rid,_raddr) \ - sll _rid,22,_rid; \ - lda _raddr,0xff88(zero); \ - sll _raddr,24,_raddr; \ - addq _raddr,_rid,_raddr -#endif - - - - - -// .macro mchk$TLEPstore rlog, rs, rs1, nodebase, tlepreg, clr, tlsb, crd -// .iif eq tlsb, lda 'rs1',<tlep$'tlepreg'_offset>(r31) -// .iif ne tlsb, lda 'rs1',<tlsb$'tlepreg'_offset>(r31) -// or 'rs1', 'nodebase', 'rs1' -// ldlp 'rs', 0('rs1') -// .iif eq crd, stlp 'rs', mchk$'tlepreg'('rlog') // store in frame -// .iif ne crd, stlp 'rs', mchk$crd_'tlepreg'('rlog') // store in frame -// .iif ne clr, stlp 'rs',0('rs1') // optional write to clear -// .endm - - -// .macro OSFmchk$TLEPstore tlepreg, clr=0, tlsb=0 -// mchk$TLEPstore r14, r8, r4, r13, <tlepreg>, <clr>, <tlsb>, crd=0 -// .endm - -#define CONCAT(_a,_b) _a ## _b - -#define OSFmchk_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \ - lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \ - or _rs1,_nodebase,_rs1; \ - ldlp _rs1,0(_rs1); \ - stlp _rs,CONCAT(mchk_,_tlepreg)(_rlog) - - -#define OSFmchk_TLEPstore(_tlepreg) OSFmchk_TLEPstore_1(r14,r8,r4,r13,_tlepreg) - - -// .macro OSFcrd$TLEPstore tlepreg, clr=0, tlsb=0 -// mchk$TLEPstore r14, r10, r1, r0, <tlepreg>, <clr>, <tlsb>, crd=1 -// .endm - -#define OSFcrd_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \ - lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \ - or _rs1,_nodebase,_rs1; \ - ldlp _rs1,0(_rs1); \ - stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog) - -#define OSFcrd_TLEPstore_tlsb_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \ - lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \ - or _rs1,_nodebase,_rs1; \ - ldlp _rs1,0(_rs1); \ - stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog) - -#define OSFcrd_TLEPstore_tlsb_clr_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \ - lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \ - or _rs1,_nodebase,_rs1; \ - ldlp _rs1,0(_rs1); \ - stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog); \ - stlp _rs,0(_rs1) - - -#define OSFcrd_TLEPstore(_tlepreg) OSFcrd_TLEPstore_1(r14,r8,r4,r13,_tlepreg) -#define OSFcrd_TLEPstore_tlsb(_tlepreg) OSFcrd_TLEPstore_tlsb_1(r14,r8,r4,r13,_tlepreg) -#define OSFcrd_TLEPstore_tlsb_clr(_tlepreg) OSFcrd_TLEPstore_tlsb_clr_1(r14,r8,r4,r13,_tlepreg) - - - - -// .macro save_pcia_intr irq -// and r13, #^xf, r25 // isolate low 4 bits -// addq r14, #4, r14 // format the TIOP Node id field -// sll r14, #4, r14 // shift the TIOP Node id -// or r14, r25, r10 // merge Node id/hose/HPC -// mfpr r14, pt14 // get saved value -// extbl r14, #'irq', r25 // confirm none outstanding -// bne r25, sys$machine_check_while_in_pal -// insbl r10, #'irq', r10 // align new info -// or r14, r10, r14 // merge info -// mtpr r14, pt14 // save it -// bic r13, #^xf, r13 // clear low 4 bits of vector -// .endm - -#define save_pcia_intr(_irq) \ - and r13, 0xf, r25; \ - addq r14, 4, r14; \ - sll r14, 4, r14; \ - or r14, r25, r10; \ - mfpr r14, pt14; \ - extbl r14, _irq, r25; \ - bne r25, sys_machine_check_while_in_pal; \ - insbl r10, _irq, r10; \ - or r14, r10, r14; \ - mtpr r14, pt14; \ - bic r13, 0xf, r13 - - - - ALIGN_BLOCK - -// .sbttl "wripir - PALcode for wripir instruction" -//orig SYS$WRIPIR: // R16 has the processor number. - -EXPORT(sys_wripir) - -//++ -// Convert the processor number to a CPU mask -//-- - and r16,MAXPROC, r14 // mask the top stuff (4 or 64 CPUs supported) - bis r31,0x1,r16 // get a one - sll r16,r14,r14 // shift the bit to the right place - sll r14,IPIQ_shift,r14 - -//++ -// Build the Broadcast Space base address -//-- - lda r16,0xf01(r31) - sll r16,32,r16 - ldah r13,0xa0(r31) - sll r13,8,r13 - bis r16,r13,r16 - lda r16,IPIQ_addr(r16) - -//++ -// Send out the IP Intr -//-- - stqp r14, 0(r16) // Tsunami MISC Register - wmb // Push out the store - - hw_rei - - - ALIGN_BLOCK -// .sbttl "CFLUSH- PALcode for CFLUSH instruction" -//+ -// SYS$CFLUSH -// Entry: -// -// R16 - contains the PFN of the page to be flushed -// -// Function: -// Flush all Dstream caches of 1 entire page -// -//- - -EXPORT(sys_cflush) - -// #convert pfn to addr, and clean off <63:20> -// #sll r16, <page_offset_size_bits>+<63-20>>, r12 - sll r16, page_offset_size_bits+(63-20),r12 - -// #ldah r13,<<1@22>+32768>@-16(r31)// + xxx<31:16> -// # stolen from srcmax code. XXX bugnion - lda r13, 0x10(r31) // assume 16Mbytes of cache - sll r13, 20, r13 // convert to bytes - - - srl r12, 63-20, r12 // shift back to normal position - xor r12, r13, r12 // xor addr<18> - - or r31, 8192/(32*8), r13 // get count of loads - nop - -cflush_loop: - subq r13, 1, r13 // decr counter - mfpr r25, ev5__intid // Fetch level of interruptor - - ldqp r31, 32*0(r12) // do a load - ldqp r31, 32*1(r12) // do next load - - ldqp r31, 32*2(r12) // do next load - ldqp r31, 32*3(r12) // do next load - - ldqp r31, 32*4(r12) // do next load - ldqp r31, 32*5(r12) // do next load - - ldqp r31, 32*6(r12) // do next load - ldqp r31, 32*7(r12) // do next load - - mfpr r14, ev5__ipl // Fetch current level - lda r12, (32*8)(r12) // skip to next cache block addr - - cmple r25, r14, r25 // R25 = 1 if intid .less than or eql ipl - beq r25, 1f // if any int's pending, re-queue CFLUSH -- need to check for hlt interrupt??? - - bne r13, cflush_loop // loop till done - hw_rei // back to user - - ALIGN_BRANCH -1: // Here if interrupted - mfpr r12, exc_addr - subq r12, 4, r12 // Backup PC to point to CFLUSH - - mtpr r12, exc_addr - nop - - mfpr r31, pt0 // Pad exc_addr write - hw_rei - - - ALIGN_BLOCK -// .sbttl "CSERVE- PALcode for CSERVE instruction" -//+ -// SYS$CSERVE -// -// Function: -// Various functions for private use of console software -// -// option selector in r0 -// arguments in r16.... -// -// -// r0 = 0 unknown -// -// r0 = 1 ldqp -// r0 = 2 stqp -// args, are as for normal STQP/LDQP in VMS PAL -// -// r0 = 3 dump_tb's -// r16 = detination PA to dump tb's to. -// -// r0<0> = 1, success -// r0<0> = 0, failure, or option not supported -// r0<63:1> = (generally 0, but may be function dependent) -// r0 - load data on ldqp -// -//- -EXPORT(sys_cserve) - -#ifdef SIMOS - /* taken from scrmax */ - cmpeq r18, CSERVE_K_RD_IMPURE, r0 - bne r0, Sys_Cserve_Rd_Impure - - cmpeq r18, CSERVE_K_JTOPAL, r0 - bne r0, Sys_Cserve_Jtopal - call_pal 0 - - or r31, r31, r0 - hw_rei // and back we go - -Sys_Cserve_Rd_Impure: - mfpr r0, pt_impure // Get base of impure scratch area. - hw_rei - - ALIGN_BRANCH - -Sys_Cserve_Jtopal: - bic a0, 3, t8 // Clear out low 2 bits of address - bis t8, 1, t8 // Or in PAL mode bit - mtpr t8,exc_addr - hw_rei - - -#else /* SIMOS */ - - cmpeq r16, cserve_ldlp, r12 // check for ldqp - bne r12, 1f // br if - - cmpeq r16, cserve_stlp, r12 // check for stqp - bne r12, 2f // br if - - cmpeq r16, cserve_callback, r12 // check for callback entry - bne r12, csrv_callback // br if - - cmpeq r16, cserve_identify, r12 // check for callback entry - bne r12, csrv_identify // br if - - or r31, r31, r0 // set failure - nop // pad palshadow write - - hw_rei // and back we go -#endif /* SIMOS */ - -// ldqp - ALIGN_QUAD -1: - ldqp r0,0(r17) // get the data - nop // pad palshadow write - - hw_rei // and back we go - - -// stqp - ALIGN_QUAD -2: - stqp r18, 0(r17) // store the data -#ifdef SIMOS - lda r0,17(r31) // bogus -#else - lda r0, CSERVE_SUCCESS(r31) // set success -#endif - hw_rei // and back we go - - - ALIGN_QUAD -csrv_callback: - ldq r16, 0(r17) // restore r16 - ldq r17, 8(r17) // restore r17 - lda r0, hlt_c_callback(r31) - br r31, sys_enter_console - - -csrv_identify: - mfpr r0, pal_base - ldqp r0, 8(r0) - hw_rei - - -// dump tb's - ALIGN_QUAD -0: - // DTB PTEs - 64 entries - addq r31, 64, r0 // initialize loop counter - nop - -1: mfpr r12, ev5__dtb_pte_temp // read out next pte to temp - mfpr r12, ev5__dtb_pte // read out next pte to reg file - - subq r0, 1, r0 // decrement loop counter - nop // Pad - no Mbox instr in cycle after mfpr - - stqp r12, 0(r16) // store out PTE - addq r16, 8 ,r16 // increment pointer - - bne r0, 1b - - ALIGN_BRANCH - // ITB PTEs - 48 entries - addq r31, 48, r0 // initialize loop counter - nop - -2: mfpr r12, ev5__itb_pte_temp // read out next pte to temp - mfpr r12, ev5__itb_pte // read out next pte to reg file - - subq r0, 1, r0 // decrement loop counter - nop // - - stqp r12, 0(r16) // store out PTE - addq r16, 8 ,r16 // increment pointer - - bne r0, 2b - or r31, 1, r0 // set success - - hw_rei // and back we go - - -// .sbttl "SYS$INTERRUPT - Interrupt processing code" - -//+ -// SYS$INTERRUPT -// -// Current state: -// Stack is pushed -// ps, sp and gp are updated -// r12, r14 - available -// r13 - INTID (new EV5 IPL) -// r25 - ISR -// r16, r17, r18 - available -// -//- - - -EXPORT(sys_interrupt) - cmpeq r13, 31, r12 - bne r12, sys_int_mchk_or_crd // Check for level 31 interrupt (machine check or crd) - - cmpeq r13, 30, r12 - bne r12, sys_int_powerfail // Check for level 30 interrupt (powerfail) - - cmpeq r13, 29, r12 - bne r12, sys_int_perf_cnt // Check for level 29 interrupt (performance counters) - - cmpeq r13, 23, r12 - bne r12, sys_int_23 // Check for level 23 interrupt - // IPI in Tsunami - - cmpeq r13, 22, r12 - bne r12, sys_int_22 // Check for level 22 interrupt - // timer interrupt - - cmpeq r13, 21, r12 - bne r12, sys_int_21 // Check for level 21 interrupt - // I/O - - cmpeq r13, 20, r12 - bne r12, sys_int_20 // Check for level 20 interrupt (might be corrected - // system error interrupt) - - mfpr r14, exc_addr // ooops, something is wrong - br r31, pal_pal_bug_check_from_int - - - - -//+ -//sys$int_2* -// Routines to handle device interrupts at IPL 23-20. -// System specific method to ack/clear the interrupt, detect passive release, -// detect interprocessor (22), interval clock (22), corrected -// system error (20) -// -// Current state: -// Stack is pushed -// ps, sp and gp are updated -// r12, r14 - available -// r13 - INTID (new EV5 IPL) -// r25 - ISR -// -// On exit: -// Interrupt has been ack'd/cleared -// a0/r16 - signals IO device interrupt -// a1/r17 - contains interrupt vector -// exit to ent_int address -// -//- - ALIGN_BRANCH -sys_int_23: - or r31,0,r16 // IPI interrupt A0 = 0 - lda r12,0xf01(r31) // build up an address for the MISC register - sll r12,16,r12 - lda r12,0xa000(r12) - sll r12,16,r12 - lda r12,IPIR_addr(r12) - - mfpr r10, pt_whami // get CPU ID - extbl r10, 1, r10 // Isolate just whami bits - or r31,0x1,r14 // load r14 with bit to clear - sll r14,r10,r14 // left shift by CPU ID - sll r14,IPIR_shift,r14 - stq_p r14, 0(r12) // clear the ipi interrupt - - br r31, pal_post_interrupt // Notify the OS - - - ALIGN_BRANCH -sys_int_22: - or r31,1,r16 // a0 means it is a clock interrupt - lda r12,0xf01(r31) // build up an address for the MISC register - sll r12,16,r12 - lda r12,0xa000(r12) - sll r12,16,r12 - lda r12,RTC_addr(r12) - - mfpr r10, pt_whami // get CPU ID - extbl r10, 1, r10 // Isolate just whami bits - or r31,0x1,r14 // load r14 with bit to clear - sll r14,r10,r14 // left shift by CPU ID - sll r14,RTC_shift,r14 // put the bits in the right position - stq_p r14, 0(r12) // clear the rtc interrupt - - br r31, pal_post_interrupt // Tell the OS - - - ALIGN_BRANCH -sys_int_20: - Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx - srl r13, 12, r13 // shift down to examine IPL15 - - Intr_Find_TIOP(r13,r14) - beq r14, 1f - - Get_TLSB_Node_Address(r14,r10) - lda r10, 0xa40(r10) // Get base TLILID address - - ldlp r13, 0(r10) // Read the TLILID register -#if turbo_pcia_intr_fix == 0 -//orig .if eq turbo_pcia_intr_fix - bne r13, pal_post_dev_interrupt -//orig .iff - beq r13, 1f - - and r13, 0x3, r10 // check for PCIA bits - beq r10, pal_post_dev_interrupt // done if nothing set - save_pcia_intr(1) - br r31, pal_post_dev_interrupt // -// orig .endc -#endif /* turbo_pcia_intr_fix == 0 */ - -1: lda r16, osfint_c_passrel(r31) // passive release - br r31, pal_post_interrupt // - - - ALIGN_BRANCH -sys_int_21: - - lda r12,0xf01(r31) // calculate DIRn address - sll r12,32,r12 - ldah r13,DIR_addr(r31) - sll r13,8,r13 - bis r12,r13,r12 - - mfpr r13, pt_whami // get CPU ID - extbl r13, 1, r13 // Isolate just whami bits - -#ifdef BIG_TSUNAMI - sll r13,4,r13 - or r12,r13,r12 -#else - lda r12,0x0080(r12) - and r13,0x1,r14 // grab LSB and shift left 6 - sll r14,6,r14 - and r13,0x2,r10 // grabl LSB+1 and shift left 9 - sll r10,9,r10 - - mskbl r12,0,r12 // calculate DIRn address - lda r13,0x280(r31) - bis r12,r13,r12 - or r12,r14,r12 - or r12,r10,r12 -#endif - - ldqp r13, 0(r12) // read DIRn - - or r31,1,r14 // set bit 55 (ISA Interrupt) - sll r14,55,r14 - - and r13, r14, r14 // check if bit 55 is set - lda r16,0x900(r31) // load offset for normal into r13 - beq r14, normal_int // if not compute the vector normally - - lda r16,0x800(r31) // replace with offset for pic - lda r12,0xf01(r31) // build an addr to access PIC - sll r12,32,r12 // at f01fc000000 - ldah r13,0xfc(r31) - sll r13,8,r13 - bis r12,r13,r12 - ldqp r13,0x0020(r12) // read PIC1 ISR for interrupting dev - -normal_int: - //ctlz r13,r14 // count the number of leading zeros - // EV5 doesn't have ctlz, but we do, so lets use it - .byte 0x4e - .byte 0x06 - .byte 0xed - .byte 0x73 - lda r10,63(r31) - subq r10,r14,r17 // subtract from - - lda r13,0x10(r31) - mulq r17,r13,r17 // compute 0x900 + (0x10 * Highest DIRn-bit) - addq r17,r16,r17 - - or r31,3,r16 // a0 means it is a I/O interrupt - - br r31, pal_post_interrupt - - ALIGN_BRANCH -pal_post_dev_interrupt: - or r13, r31, r17 // move vector to a1 - or r31, osfint_c_dev, r16 // a0 signals IO device interrupt - -pal_post_interrupt: - mfpr r12, pt_entint - - mtpr r12, exc_addr - - nop - nop - - hw_rei_spe - - - -//+ -// sys_passive_release -// Just pretend the interrupt never occurred. -//- - -EXPORT(sys_passive_release) - mtpr r11, ev5__dtb_cm // Restore Mbox current mode for ps - nop - - mfpr r31, pt0 // Pad write to dtb_cm - hw_rei - -//+ -//sys_int_powerfail -// A powerfail interrupt has been detected. The stack has been pushed. -// IPL and PS are updated as well. -// -// I'm not sure what to do here, I'm treating it as an IO device interrupt -// -//- - - ALIGN_BLOCK -sys_int_powerfail: - lda r12, 0xffc4(r31) // get GBUS_MISCR address bits - sll r12, 24, r12 // shift to proper position - ldqp r12, 0(r12) // read GBUS_MISCR - srl r12, 5, r12 // isolate bit <5> - blbc r12, 1f // if clear, no missed mchk - - // Missed a CFAIL mchk - lda r13, 0xffc7(r31) // get GBUS$SERNUM address bits - sll r13, 24, r13 // shift to proper position - lda r14, 0x40(r31) // get bit <6> mask - ldqp r12, 0(r13) // read GBUS$SERNUM - or r12, r14, r14 // set bit <6> - stqp r14, 0(r13) // clear GBUS$SERNUM<6> - mb - mb - -1: br r31, sys_int_mchk // do a machine check - - lda r17, scb_v_pwrfail(r31) // a1 to interrupt vector - mfpr r25, pt_entint - - lda r16, osfint_c_dev(r31) // a0 to device code - mtpr r25, exc_addr - - nop // pad exc_addr write - nop - - hw_rei_spe - -//+ -// sys$halt_interrupt -// A halt interrupt has been detected. Pass control to the console. -// -// -//- - EXPORT(sys_halt_interrupt) - - ldah r13, 0x1800(r31) // load Halt/^PHalt bits - Write_TLINTRSUMx(r13,r10,r14) // clear the ^PHalt bits - - mtpr r11, dtb_cm // Restore Mbox current mode - nop - nop - mtpr r0, pt0 -#ifndef SIMOS - pvc_jsr updpcb, bsr=1 - bsr r0, pal_update_pcb // update the pcb -#endif - lda r0, hlt_c_hw_halt(r31) // set halt code to hw halt - br r31, sys_enter_console // enter the console - - - -//+ -// sys$int_mchk_or_crd -// -// Current state: -// Stack is pushed -// ps, sp and gp are updated -// r12 -// r13 - INTID (new EV5 IPL) -// r14 - exc_addr -// r25 - ISR -// r16, r17, r18 - available -// -//- - ALIGN_BLOCK - -sys_int_mchk_or_crd: - srl r25, isr_v_mck, r12 - blbs r12, sys_int_mchk - //+ - // Not a Machine check interrupt, so must be an Internal CRD interrupt - //- - - mb //Clear out Cbox prior to reading IPRs - srl r25, isr_v_crd, r13 //Check for CRD - blbc r13, pal_pal_bug_check_from_int //If CRD not set, shouldn't be here!!! - - lda r9, 1(r31) - sll r9, hwint_clr_v_crdc, r9 // get ack bit for crd - mtpr r9, ev5__hwint_clr // ack the crd interrupt - - or r31, r31, r12 // clear flag - lda r9, mchk_c_ecc_c(r31) // Correctable error MCHK code - -sys_merge_sys_corr: - ldah r14, 0xfff0(r31) - mtpr r0, pt0 // save r0 for scratch - zap r14, 0xE0, r14 // Get Cbox IPR base - mtpr r1, pt1 // save r0 for scratch - - ldqp r0, ei_addr(r14) // EI_ADDR IPR - ldqp r10, fill_syn(r14) // FILL_SYN IPR - bis r0, r10, r31 // Touch lds to make sure they complete before doing scrub - - blbs r12, 1f // no scrubbing for IRQ0 case -// XXX bugnion pvc_jsr crd_scrub_mem, bsr=1 - bsr r13, sys_crd_scrub_mem // and go scrub - - // ld/st pair in scrub routine will have finished due - // to ibox stall of stx_c. Don't need another mb. - ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN - or r8, r31, r12 // Must only be executed once in this flow, and must - br r31, 2f // be after the scrub routine. - -1: ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN - // For IRQ0 CRD case only - meaningless data. - -2: mfpr r13, pt_mces // Get MCES - srl r12, ei_stat_v_ei_es, r14 // Isolate EI_STAT:EI_ES - blbc r14, 6f // branch if 630 - srl r13, mces_v_dsc, r14 // check if 620 reporting disabled - blbc r14, 5f // branch if enabled - or r13, r31, r14 // don't set SCE if disabled - br r31, 8f // continue -5: bis r13, BIT(mces_v_sce), r14 // Set MCES<SCE> bit - br r31, 8f - -6: srl r13, mces_v_dpc, r14 // check if 630 reporting disabled - blbc r14, 7f // branch if enabled - or r13, r31, r14 // don't set PCE if disabled - br r31, 8f // continue -7: bis r13, BIT(mces_v_pce), r14 // Set MCES<PCE> bit - - // Setup SCB if dpc is not set -8: mtpr r14, pt_mces // Store updated MCES - srl r13, mces_v_sce, r1 // Get SCE - srl r13, mces_v_pce, r14 // Get PCE - or r1, r14, r1 // SCE OR PCE, since they share - // the CRD logout frame - // Get base of the logout area. - GET_IMPURE(r14) // addr of per-cpu impure area - GET_ADDR(r14,(pal_logout_area+mchk_crd_base),r14) - - blbc r1, sys_crd_write_logout_frame // If pce/sce not set, build the frame - - // Set the 2nd error flag in the logout area: - - lda r1, 3(r31) // Set retry and 2nd error flags - sll r1, 30, r1 // Move to bits 31:30 of logout frame flag longword - stlp r1, mchk_crd_flag+4(r14) // store flag longword - br sys_crd_ack - -sys_crd_write_logout_frame: - // should only be here if neither the pce or sce bits are set - - //+ - // Write the mchk code to the logout area - //- - stqp r9, mchk_crd_mchk_code(r14) - - - //+ - // Write the first 2 quadwords of the logout area: - //- - lda r1, 1(r31) // Set retry flag - sll r1, 63, r9 // Move retry flag to bit 63 - lda r1, mchk_crd_size(r9) // Combine retry flag and frame size - stqp r1, mchk_crd_flag(r14) // store flag/frame size - -#ifndef SIMOS - /* needed? bugnion */ - lda r1, mchk_crd_sys_base(r31) // sys offset - sll r1, 32, r1 - lda r1, mchk_crd_cpu_base(r1) // cpu offset - stqp r1, mchk_crd_offsets(r14) // store sys offset/cpu offset into logout frame - -#endif - //+ - // Write error IPRs already fetched to the logout area - //- - stqp r0, mchk_crd_ei_addr(r14) - stqp r10, mchk_crd_fill_syn(r14) - stqp r8, mchk_crd_ei_stat(r14) - stqp r25, mchk_crd_isr(r14) - //+ - // Log system specific info here - //- -crd_storeTLEP_: - lda r1, 0xffc4(r31) // Get GBUS$MISCR address - sll r1, 24, r1 - ldqp r1, 0(r1) // Read GBUS$MISCR - sll r1, 16, r1 // shift up to proper field - mfpr r10, pt_whami // get our node id - extbl r10, 1, r10 // shift to bit 0 - or r1, r10, r1 // merge MISCR and WHAMI - stlp r1, mchk_crd_whami(r14) // write to crd logout area - srl r10, 1, r10 // shift off cpu number - - Get_TLSB_Node_Address(r10,r0) // compute our nodespace address - - OSFcrd_TLEPstore_tlsb(tldev) - OSFcrd_TLEPstore_tlsb_clr(tlber) - OSFcrd_TLEPstore_tlsb_clr(tlesr0) - OSFcrd_TLEPstore_tlsb_clr(tlesr1) - OSFcrd_TLEPstore_tlsb_clr(tlesr2) - OSFcrd_TLEPstore_tlsb_clr(tlesr3) - -sys_crd_ack: - mfpr r0, pt0 // restore r0 - mfpr r1, pt1 // restore r1 - - srl r12, ei_stat_v_ei_es, r12 - blbc r12, 5f - srl r13, mces_v_dsc, r10 // logging enabled? - br r31, 6f -5: srl r13, mces_v_dpc, r10 // logging enabled? -6: blbc r10, sys_crd_post_interrupt // logging enabled -- report it - - // logging not enabled -- - // Get base of the logout area. - GET_IMPURE(r13) // addr of per-cpu impure area - GET_ADDR(r13,(pal_logout_area+mchk_crd_base),r13) - ldlp r10, mchk_crd_rsvd(r13) // bump counter - addl r10, 1, r10 - stlp r10, mchk_crd_rsvd(r13) - mb - br r31, sys_crd_dismiss_interrupt // just return - - //+ - // The stack is pushed. Load up a0,a1,a2 and vector via entInt - // - //- - - ALIGN_BRANCH -sys_crd_post_interrupt: - lda r16, osfint_c_mchk(r31) // flag as mchk/crd in a0 - lda r17, scb_v_proc_corr_err(r31) // a1 <- interrupt vector - - blbc r12, 1f - lda r17, scb_v_sys_corr_err(r31) // a1 <- interrupt vector - -1: subq r31, 1, r18 // get a -1 - mfpr r25, pt_entInt - - srl r18, 42, r18 // shift off low bits of kseg addr - mtpr r25, exc_addr // load interrupt vector - - sll r18, 42, r18 // shift back into position - or r14, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address - - hw_rei_spe // done - - - //+ - // The stack is pushed. Need to back out of it all. - //- - -sys_crd_dismiss_interrupt: - br r31, Call_Pal_Rti - - -// .sbttl sys_crd_scrub_mem - - //+ - // - // sys_crd_scrub_mem - // called - // jsr r13, sys$crd_scrub_mem - // r0 = addr of cache block - // - //- - - - - ALIGN_BLOCK // align for branch target -sys_crd_scrub_mem: - // now find error in memory, and attempt to scrub that cache block - // This routine just scrubs the failing octaword - // Only need to "touch" one quadword per octaword to accomplish the scrub - srl r0, 39, r8 // get high bit of bad pa - blbs r8, 1f // don't attempt fixup on IO space addrs - nop // needed to align the ldqpl to octaword boundary - nop // " - - ldqpl r8, 0(r0) // attempt to read the bad memory - // location - // (Note bits 63:40,3:0 of ei_addr - // are set to 1, but as long as - // we are doing a phys ref, should - // be ok) - nop // Needed to keep the Ibox from swapping the ldqpl into E1 - - stqpc r8, 0(r0) // Store it back if it is still there. - // If store fails, location already - // scrubbed by someone else - - nop // needed to align the ldqpl to octaword boundary - - lda r8, 0x20(r31) // flip bit 5 to touch next hexaword - xor r8, r0, r0 - nop // needed to align the ldqpl to octaword boundary - nop // " - - ldqpl r8, 0(r0) // attempt to read the bad memory - // location - // (Note bits 63:40,3:0 of ei_addr - // are set to 1, but as long as - // we are doing a phys ref, should - // be ok) - nop // Needed to keep the Ibox from swapping the ldqpl into E1 - - stqpc r8, 0(r0) // Store it back if it is still there. - // If store fails, location already - // scrubbed by someone else - - lda r8, 0x20(r31) // restore r0 to original address - xor r8, r0, r0 - - //at this point, ei_stat could be locked due to a new corr error on the ld, - //so read ei_stat to unlock AFTER this routine. - -// XXX bugnion pvc$jsr crd_scrub_mem, bsr=1, dest=1 -1: ret r31, (r13) // and back we go - - -// .sbttl "SYS$INT_MCHK - MCHK Interrupt code" -//+ -// Machine check interrupt from the system. Setup and join the -// regular machine check flow. -// On exit: -// pt0 - saved r0 -// pt1 - saved r1 -// pt4 - saved r4 -// pt5 - saved r5 -// pt6 - saved r6 -// pt10 - saved exc_addr -// pt_misc<47:32> - mchk code -// pt_misc<31:16> - scb vector -// r14 - base of Cbox IPRs in IO space -// MCES<mchk> is set -//- - ALIGN_BLOCK -sys_int_mchk: - lda r14, mchk_c_sys_hrd_error(r31) - mfpr r12, exc_addr - - addq r14, 1, r14 // Flag as interrupt - nop - - sll r14, 32, r14 // Move mchk code to position - mtpr r12, pt10 // Stash exc_addr - - mfpr r12, pt_misc // Get MCES and scratch - mtpr r0, pt0 // Stash for scratch - - zap r12, 0x3c, r12 // Clear scratch - blbs r12, sys_double_machine_check // MCHK halt if double machine check - - or r12, r14, r12 // Combine mchk code - lda r14, scb_v_sysmchk(r31) // Get SCB vector - - sll r14, 16, r14 // Move SCBv to position - or r12, r14, r14 // Combine SCBv - - bis r14, BIT(mces_v_mchk), r14 // Set MCES<MCHK> bit - mtpr r14, pt_misc // Save mchk code!scbv!whami!mces - - ldah r14, 0xfff0(r31) - mtpr r1, pt1 // Stash for scratch - - zap r14, 0xE0, r14 // Get Cbox IPR base - mtpr r4, pt4 - - mtpr r5, pt5 - -#if beh_model -// .if ne beh_model - ldah r25, 0xC000(r31) // Get base of demon space - lda r25, 0x340(r25) // Add interrupt demon offset - - ldqp r13, 0(r25) // Read the control register - nop - - and r13, 0x10, r8 // For debug, check that the interrupt is expected - beq r8, interrupt_not_expected - - bic r13, 0x10, r13 - stqp r13, 0(r25) // Ack and clear the interrupt -// XXX bugnion pvc$violate 379 // stqp can't trap except replay. mt ipr only problem if mf same ipr in same shadow - .endc -#endif - - mtpr r6, pt6 - br r31, sys_mchk_collect_iprs // Join common machine check flow - - -// .sbttl "SYS$INT_PERF_CNT - Performance counter interrupt code" -//+ -//sys$int_perf_cnt -// -// A performance counter interrupt has been detected. The stack has been pushed. -// IPL and PS are updated as well. -// -// on exit to interrupt entry point ENTINT:: -// a0 = osfint$c_perf -// a1 = scb$v_perfmon (650) -// a2 = 0 if performance counter 0 fired -// a2 = 1 if performance counter 1 fired -// a2 = 2 if performance counter 2 fired -// (if more than one counter overflowed, an interrupt will be -// generated for each counter that overflows) -// -// -//- - ALIGN_BLOCK -sys_int_perf_cnt: // Performance counter interrupt - lda r17, scb_v_perfmon(r31) // a1 to interrupt vector - mfpr r25, pt_entint - - lda r16, osfint_c_perf(r31) // a0 to perf counter code - mtpr r25, exc_addr - - //isolate which perf ctr fired, load code in a2, and ack - mfpr r25, isr - or r31, r31, r18 // assume interrupt was pc0 - - srl r25, isr_v_pc1, r25 // isolate - cmovlbs r25, 1, r18 // if pc1 set, load 1 into r14 - - srl r25, 1, r25 // get pc2 - cmovlbs r25, 2, r18 // if pc2 set, load 2 into r14 - - lda r25, 1(r31) // get a one - sll r25, r18, r25 - - sll r25, hwint_clr_v_pc0c, r25 // ack only the perf counter that generated the interrupt - mtpr r25, hwint_clr - - hw_rei_spe - - - - ALIGN_BLOCK -// .sbttl "System specific RESET code" -//+ -// RESET code -// On entry: -// r1 = pal_base +8 -// -// Entry state on trap: -// r0 = whami -// r2 = base of scratch area -// r3 = halt code -// and the following 3 if init_cbox is enabled: -// r5 = sc_ctl -// r6 = bc_ctl -// r7 = bc_cnfg -// -// Entry state on switch: -// r17 - new PC -// r18 - new PCBB -// r19 - new VPTB -// -//- - -#if rax_mode==0 - .globl sys_reset -sys_reset: -// mtpr r31, ic_flush_ctl // do not flush the icache - done by hardware before SROM load - mtpr r31, itb_ia // clear the ITB - mtpr r31, dtb_ia // clear the DTB - - lda r1, -8(r1) // point to start of code - mtpr r1, pal_base // initialize PAL_BASE - - // Interrupts - mtpr r31, astrr // stop ASTs - mtpr r31, aster // stop ASTs - mtpr r31, sirr // clear software interrupts - - mtpr r0, pt1 // r0 is whami (unless we entered via swp) - -//orig ldah r1, <<1@<icsr$v_sde-16>> ! <1@<icsr$v_fpe-16>> ! <2@<icsr$v_spe-16>>>(r31) - ldah r1,(BIT(icsr_v_sde-16)|BIT(icsr_v_fpe-16)|BIT(icsr_v_spe-16+1))(zero) - -#if disable_crd == 0 -// .if eq disable_crd - bis r31, 1, r0 - sll r0, icsr_v_crde, r0 // A 1 in iscr<corr_read_enable> - or r0, r1, r1 // Set the bit -#endif - - mtpr r1, icsr // ICSR - Shadows enabled, Floating point enable, - // super page enabled, correct read per assembly option - - // Mbox/Dcache init -//orig lda r1, <1@<mcsr$v_sp1>>(r31) - lda r1,BIT(mcsr_v_sp1)(zero) - - mtpr r1, mcsr // MCSR - Super page enabled - lda r1, BIT(dc_mode_v_dc_ena)(r31) - ALIGN_BRANCH -// mtpr r1, dc_mode // turn Dcache on - nop - - mfpr r31, pt0 // No Mbox instr in 1,2,3,4 - mfpr r31, pt0 - mfpr r31, pt0 - mfpr r31, pt0 - mtpr r31, dc_flush // flush Dcache - - // build PS (IPL=7,CM=K,VMM=0,SW=0) - lda r11, 0x7(r31) // Set shadow copy of PS - kern mode, IPL=7 - lda r1, 0x1F(r31) - mtpr r1, ipl // set internal <ipl>=1F - mtpr r31, ev5__ps // set new ps<cm>=0, Ibox copy - mtpr r31, dtb_cm // set new ps<cm>=0, Mbox copy - - // Create the PALtemp pt_intmask - - // MAP: - // OSF IPL EV5 internal IPL(hex) note - // 0 0 - // 1 1 - // 2 2 - // 3 14 device - // 4 15 device - // 5 16 device - // 6 1E device,performance counter, powerfail - // 7 1F - // - - ldah r1, 0x1f1E(r31) // Create upper lw of int_mask - lda r1, 0x1615(r1) - - sll r1, 32, r1 - ldah r1, 0x1402(r1) // Create lower lw of int_mask - - lda r1, 0x0100(r1) - mtpr r1, pt_intmask // Stash in PALtemp - - // Unlock a bunch of chip internal IPRs - mtpr r31, exc_sum // clear out exeception summary and exc_mask - mfpr r31, va // unlock va, mmstat -//rig lda r8, <<1@icperr_stat$v_dpe> ! <1@icperr_stat$v_tpe> ! <1@icperr_stat$v_tmr>>(r31) - lda r8,(BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(zero) - - mtpr r8, icperr_stat // Clear Icache parity error & timeout status -//orig lda r8, <<1@dcperr_stat$v_lock> ! <1@dcperr_stat$v_seo>>(r31) - lda r8,(BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31) - - mtpr r8, dcperr_stat // Clear Dcache parity error status - - rc r0 // clear intr_flag - mtpr r31, pt_trap - - mfpr r0, pt_misc - srl r0, pt_misc_v_switch, r1 - blbs r1, sys_reset_switch // see if we got here from swppal - - // Rest of the "real" reset flow - // ASN - mtpr r31, dtb_asn - mtpr r31, itb_asn - - lda r1, 0x67(r31) - sll r1, hwint_clr_v_pc0c, r1 - mtpr r1, hwint_clr // Clear hardware interrupt requests - - lda r1, BIT(mces_v_dpc)(r31) // 1 in disable processor correctable error - mfpr r0, pt1 // get whami - insbl r0, 1, r0 // isolate whami in correct pt_misc position - or r0, r1, r1 // combine whami and mces - mtpr r1, pt_misc // store whami and mces, swap bit clear - - zapnot r3, 1, r0 // isolate halt code - mtpr r0, pt0 // save entry type - - // Cycle counter - or r31, 1, r9 // get a one - sll r9, 32, r9 // shift to <32> - mtpr r31, cc // clear Cycle Counter - mtpr r9, cc_ctl // clear and enable the Cycle Counter - mtpr r31, pt_scc // clear System Cycle Counter - - - // Misc PALtemps - mtpr r31, maf_mode // no mbox instructions for 3 cycles - or r31, 1, r1 // get bogus scbb value - mtpr r1, pt_scbb // load scbb - mtpr r31, pt_prbr // clear out prbr -#ifdef SIMOS - // yes, this is ugly, but you figure out a better - // way to get the address of the kludge_initial_pcbb - // in r1 with an uncooperative assembler --ali - br r1, kludge_getpcb_addr - br r31, kludge_initial_pcbb -kludge_getpcb_addr: - ldqp r19, 0(r1) - sll r19, 44, r19 - srl r19, 44, r19 - mulq r19,4,r19 - addq r19, r1, r1 - addq r1,4,r1 -// or zero,kludge_initial_pcbb,r1 -// GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1) -#else - mfpr r1, pal_base -//orig sget_addr r1, (kludge_initial_pcbb-pal$base), r1, verify=0// get address for temp pcbb - GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1) -#endif - mtpr r1, pt_pcbb // load pcbb - lda r1, 2(r31) // get a two - sll r1, 32, r1 // gen up upper bits - mtpr r1, mvptbr - mtpr r1, ivptbr - mtpr r31, pt_ptbr - // Performance counters - mtpr r31, pmctr - -#if init_cbox != 0 -// .if ne init_cbox - // Only init the Scache and the Bcache if there have been no previous - // cacheable dstream loads or stores. - // - // Inputs: - // r5 - sc_ctl - // r6 - bc_ctl - // r7 - bc_cnfg - - ldah r0, 0xfff0(r31) - zap r0, 0xE0, r0 // Get Cbox IPR base - ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl -temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1> - lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode) - sll r20, 1, r20 -temp = 0x017441 // default bc_config - get_addr r21, temp, r31 // create default bc_config - lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl - -// XXX bugnion pvc$jsr scbcctl, bsr=1 - bsr r10, set_sc_bc_ctl - update_bc_ctl_shadow r6, r23 // update bc_ctl shadow using r6 as input// r23 gets adjusted impure pointer - store_reg1 bc_config, r7, r23, ipr=1 // update bc_config shadow in impure area -// .endc -#endif - // Clear pmctr_ctl in impure area - -#ifndef SIMOS - // can't assemble ??? - update_pmctr_ctl r31, r1 // clear pmctr_ctl // r1 trashed -#endif - - ldah r14, 0xfff0(r31) - zap r14, 0xE0, r14 // Get Cbox IPR base -#ifndef SIMOS - ldqp r31, sc_stat(r14) // Clear sc_stat and sc_addr - ldqp r31, ei_stat(r14) - ldqp r31, ei_stat(r14) // Clear ei_stat, ei_addr, bc_tag_addr, fill_syn -#endif - GET_IMPURE(r13) - stqpc r31, 0(r13) // Clear lock_flag - - mfpr r0, pt0 // get entry type - br r31, sys_enter_console // enter the cosole - -#endif /* rax_mode == 0 */ - - - - -//.if ne rax_mode -#if rax_mode != 0 - - // For RAX: - // r0 - icsr at first, then used for cbox ipr base offset - // r2 - mcsr - // r3 - dc_mode - // r4 - maf_mode - // r5 - sc_ctl - // r6 - bc_ctl - // r7 - bc_cnfg - .globl sys_reset -sys_reset: - mtpr r31, ev5__dtb_cm // set mbox mode to kernel - mtpr r31, ev5__ps // set Ibox mode to kernel - E1 - - mtpr r0, ev5__icsr // Load ICSR - E1 - - mtpr r2, ev5__mcsr - mfpr r8, pal_base - - ldah r0, 0xfff0(r31) - zap r0, 0xE0, r0 // Get Cbox IPR base - - mtpr r31, ev5__itb_asn // clear asn - E1 - ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl - -temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1> - lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode) - sll r20, 1, r20 - -temp = 0x017441 // default bc_config - get_addr r21, temp, r31 // create default bc_config - lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl - -// XXX bugnion pvc$jsr scbcctl, bsr=1 - bsr r10, set_sc_bc_ctl - update_bc_ctl_shadow r6, r2 // initialize bc_ctl shadow// adjusted impure pointer in r2 - store_reg1 pmctr_ctl, r31, r2, ipr=1 // clear pmctr_ctl - store_reg1 bc_config, r7, r2, ipr=1 // initialize bc_config shadow - - mtpr r3, ev5__dc_mode // write dc_mode - mtpr r31, ev5__dc_flush // flush dcache - - mtpr r31, ev5__exc_sum // clear exc_sum - E1 - mtpr r31, ev5__exc_mask // clear exc_mask - E1 - - ldah r2, 4(r31) // For EXC_ADDR - mtpr r2, ev5__exc_addr // EXC_ADDR to 40000 (hex) - - mtpr r31, ev5__sirr // Clear SW interrupts (for ISP) - mtpr r4, ev5__maf_mode // write maf_mode - - mtpr r31, ev5__alt_mode // set alt_mode to kernel - mtpr r31, ev5__itb_ia // clear ITB - E1 - - lda r1, 0x1F(r31) // For IPL - mtpr r1, ev5__ipl // IPL to 1F - - mtpr r31, ev5__hwint_clr // clear hardware interrupts - mtpr r31, ev5__aster // disable AST interrupts - - mtpr r31, ev5__astrr // clear AST requests - mtpr r31, ev5__dtb_ia // clear dtb - - nop - mtpr r31, pt_trap - - srl r2, page_offset_size_bits, r9 // Start to make PTE for address 40000 - sll r9, 32, r9 - - lda r9, 0x7F01(r9) // Make PTE, V set, all RE set, all but UWE set - nop - - mtpr r9, dtb_pte // ACORE hack, load TB with 1-1 translation for address 40000 - mtpr r2, itb_tag // ACORE hack, load TB with 1-1 translation for address 40000 - - mtpr r2, dtb_tag - mtpr r9, itb_pte - - and r31, r31, r0 // clear deposited registers, note: r2 already overwritten - and r31, r31, r3 - - and r31, r31, r4 - and r31, r31, r5 - - and r31, r31, r6 - and r31, r31, r7 - - hw_rei //May need to be a rei_stall since - //we write to TB's above - //However, it currently works ok. (JH) - - -// .endc -#endif /*rax_mode != 0 */ - - - // swppal entry - // r0 - pt_misc - // r17 - new PC - // r18 - new PCBB - // r19 - new VPTB -sys_reset_switch: - or r31, 1, r9 - sll r9, pt_misc_v_switch, r9 - bic r0, r9, r0 // clear switch bit - mtpr r0, pt_misc - - rpcc r1 // get cyccounter - - ldqp r22, osfpcb_q_fen(r18) // get new fen/pme - ldlp r23, osfpcb_l_cc(r18) // get cycle counter - ldlp r24, osfpcb_l_asn(r18) // get new asn - - - ldqp r25, osfpcb_q_Mmptr(r18)// get new mmptr - sll r25, page_offset_size_bits, r25 // convert pfn to pa - mtpr r25, pt_ptbr // load the new mmptr - mtpr r18, pt_pcbb // set new pcbb - - bic r17, 3, r17 // clean use pc - mtpr r17, exc_addr // set new pc - mtpr r19, mvptbr - mtpr r19, ivptbr - - ldqp r30, osfpcb_q_Usp(r18) // get new usp - mtpr r30, pt_usp // save usp - - sll r24, dtb_asn_v_asn, r8 - mtpr r8, dtb_asn - sll r24, itb_asn_v_asn, r24 - mtpr r24, itb_asn - - mfpr r25, icsr // get current icsr - lda r24, 1(r31) - sll r24, icsr_v_fpe, r24 // 1 in icsr<fpe> position - bic r25, r24, r25 // clean out old fpe - and r22, 1, r22 // isolate new fen bit - sll r22, icsr_v_fpe, r22 - or r22, r25, r25 // or in new fpe - mtpr r25, icsr // update ibox ipr - - subl r23, r1, r1 // gen new cc offset - insll r1, 4, r1 // << 32 - mtpr r1, cc // set new offset - - or r31, r31, r0 // set success - ldqp r30, osfpcb_q_Ksp(r18) // get new ksp - mfpr r31, pt0 // stall - hw_rei_stall - -// .sbttl "SYS_MACHINE_CHECK - Machine check PAL" - ALIGN_BLOCK -//+ -//sys$machine_check -// A machine_check trap has occurred. The Icache has been flushed. -// -//- - -EXPORT(sys_machine_check) - // Need to fill up the refill buffer (32 instructions) and - // then flush the Icache again. - // Also, due to possible 2nd Cbox register file write for - // uncorrectable errors, no register file read or write for 7 cycles. - - nop - mtpr r0, pt0 // Stash for scratch -- OK if Cbox overwrites r0 later - - nop - nop - - nop - nop - - nop - nop - - nop - nop - // 10 instructions// 5 cycles - - nop - nop - - nop - nop - - // Register file can now be written - lda r0, scb_v_procmchk(r31) // SCB vector - mfpr r13, pt_mces // Get MCES - sll r0, 16, r0 // Move SCBv to correct position -// bis r13, #<1@mces$v_mchk>, r14 // Set MCES<MCHK> bit - bis r13, BIT(mces_v_mchk), r14 // Set MCES<MCHK> bit - - - zap r14, 0x3C, r14 // Clear mchk_code word and SCBv word - mtpr r14, pt_mces - // 20 instructions - - nop - or r14, r0, r14 // Insert new SCB vector - lda r0, mchk_c_proc_hrd_error(r31) // MCHK code - mfpr r12, exc_addr - - sll r0, 32, r0 // Move MCHK code to correct position - mtpr r4, pt4 - or r14, r0, r14 // Insert new MCHK code - mtpr r14, pt_misc // Store updated MCES, MCHK code, and SCBv - - ldah r14, 0xfff0(r31) - mtpr r1, pt1 // Stash for scratch - 30 instructions - - zap r14, 0xE0, r14 // Get Cbox IPR base - mtpr r12, pt10 // Stash exc_addr - - - - mtpr r31, ic_flush_ctl // Second Icache flush, now it is really flushed. - blbs r13, sys_double_machine_check // MCHK halt if double machine check - - mtpr r6, pt6 - mtpr r5, pt5 - - // Look for the powerfail cases here.... - mfpr r4, isr - srl r4, isr_v_pfl, r4 - blbc r4, sys_mchk_collect_iprs // skip if no powerfail interrupt pending - lda r4, 0xffc4(r31) // get GBUS$MISCR address bits - sll r4, 24, r4 // shift to proper position - ldqp r4, 0(r4) // read GBUS$MISCR - srl r4, 5, r4 // isolate bit <5> - blbc r4, sys_mchk_collect_iprs // skip if already cleared - // No missed CFAIL mchk - lda r5, 0xffc7(r31) // get GBUS$SERNUM address bits - sll r5, 24, r5 // shift to proper position - lda r6, 0x40(r31) // get bit <6> mask - ldqp r4, 0(r5) // read GBUS$SERNUM - or r4, r6, r6 // set bit <6> - stqp r6, 0(r5) // clear GBUS$SERNUM<6> - mb - mb - - - //+ - // Start to collect the IPRs. Common entry point for mchk flows. - // - // Current state: - // pt0 - saved r0 - // pt1 - saved r1 - // pt4 - saved r4 - // pt5 - saved r5 - // pt6 - saved r6 - // pt10 - saved exc_addr - // pt_misc<47:32> - mchk code - // pt_misc<31:16> - scb vector - // r14 - base of Cbox IPRs in IO space - // r0, r1, r4, r5, r6, r12, r13, r25 - available - // r8, r9, r10 - available as all loads are physical - // MCES<mchk> is set - // - //- - -EXPORT(sys_mchk_collect_iprs) - mb // MB before reading Scache IPRs - mfpr r1, icperr_stat - - mfpr r8, dcperr_stat - mtpr r31, dc_flush // Flush the Dcache - - mfpr r31, pt0 // Pad Mbox instructions from dc_flush - mfpr r31, pt0 - nop - nop - - ldqp r9, sc_addr(r14) // SC_ADDR IPR - bis r9, r31, r31 // Touch ld to make sure it completes before - // read of SC_STAT - ldqp r10, sc_stat(r14) // SC_STAT, also unlocks SC_ADDR - - ldqp r12, ei_addr(r14) // EI_ADDR IPR - ldqp r13, bc_tag_addr(r14) // BC_TAG_ADDR IPR - ldqp r0, fill_syn(r14) // FILL_SYN IPR - bis r12, r13, r31 // Touch lds to make sure they complete before reading EI_STAT - bis r0, r0, r31 // Touch lds to make sure they complete before reading EI_STAT - ldqp r25, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN - ldqp r31, ei_stat(r14) // Read again to insure it is unlocked - - - - - //+ - // Look for nonretryable cases - // In this segment: - // r5<0> = 1 means retryable - // r4, r6, and r14 are available for scratch - // - //- - - - bis r31, r31, r5 // Clear local retryable flag - srl r25, ei_stat_v_bc_tperr, r25 // Move EI_STAT status bits to low bits - - lda r4, 1(r31) - sll r4, icperr_stat_v_tmr, r4 - and r1, r4, r4 // Timeout reset - bne r4, sys_cpu_mchk_not_retryable - - and r8, BIT(dcperr_stat_v_lock), r4 // DCache parity error locked - bne r4, sys_cpu_mchk_not_retryable - - lda r4, 1(r31) - sll r4, sc_stat_v_sc_scnd_err, r4 - and r10, r4, r4 // 2nd Scache error occurred - bne r4, sys_cpu_mchk_not_retryable - - - bis r31, 0xa3, r4 // EI_STAT Bcache Tag Parity Error, Bcache Tag Control - // Parity Error, Interface Parity Error, 2nd Error - - and r25, r4, r4 - bne r4, sys_cpu_mchk_not_retryable - -// bis r31, #<1@<ei_stat$v_unc_ecc_err-ei_stat$v_bc_tperr>>, r4 - bis r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4 - and r25, r4, r4 // Isolate the Uncorrectable Error Bit -// bis r31, #<1@<ei_stat$v_fil_ird-ei_stat$v_bc_tperr>>, r6 - bis r31, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r6 // Isolate the Iread bit - cmovne r6, 0, r4 // r4 = 0 if IRD or if No Uncorrectable Error - bne r4, sys_cpu_mchk_not_retryable - - lda r4, 7(r31) - and r10, r4, r4 // Isolate the Scache Tag Parity Error bits - bne r4, sys_cpu_mchk_not_retryable // All Scache Tag PEs are not retryable - - - lda r4, 0x7f8(r31) - and r10, r4, r4 // Isolate the Scache Data Parity Error bits - srl r10, sc_stat_v_cbox_cmd, r6 - and r6, 0x1f, r6 // Isolate Scache Command field - subq r6, 1, r6 // Scache Iread command = 1 - cmoveq r6, 0, r4 // r4 = 0 if IRD or if No Parity Error - bne r4, sys_cpu_mchk_not_retryable - - // Look for the system unretryable cases here.... - - mfpr r4, isr // mchk_interrupt pin asserted - srl r4, isr_v_mck, r4 - blbs r4, sys_cpu_mchk_not_retryable - - - - //+ - // Look for retryable cases - // In this segment: - // r5<0> = 1 means retryable - // r6 - holds the mchk code - // r4 and r14 are available for scratch - // - //- - - - // Within the chip, the retryable cases are Istream errors - lda r4, 3(r31) - sll r4, icperr_stat_v_dpe, r4 - and r1, r4, r4 - cmovne r4, 1, r5 // Retryable if just Icache parity error - - - lda r4, 0x7f8(r31) - and r10, r4, r4 // Isolate the Scache Data Parity Error bits - srl r10, sc_stat_v_cbox_cmd, r14 - and r14, 0x1f, r14 // Isolate Scache Command field - subq r14, 1, r14 // Scache Iread command = 1 - cmovne r4, 1, r4 // r4 = 1 if Scache data parity error bit set - cmovne r14, 0, r4 // r4 = 1 if Scache PE and Iread - bis r4, r5, r5 // Accumulate - - - bis r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4 - and r25, r4, r4 // Isolate the Uncorrectable Error Bit - and r25, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r14 // Isolate the Iread bit - cmovne r4, 1, r4 // r4 = 1 if uncorr error - cmoveq r14, 0, r4 // r4 = 1 if uncorr and Iread - bis r4, r5, r5 // Accumulate - - mfpr r6, pt_misc - extwl r6, 4, r6 // Fetch mchk code - bic r6, 1, r6 // Clear flag from interrupt flow - cmovne r5, mchk_c_retryable_ird, r6 // Set mchk code - - - - // In the system, the retryable cases are ... - // (code here handles beh model read NXM) - -#if beh_model != 0 -// .if ne beh_model - ldah r4, 0xC000(r31) // Get base of demon space - lda r4, 0x550(r4) // Add NXM demon flag offset - - ldqp r4, 0(r4) // Read the demon register - lda r14, mchk_c_read_nxm(r31) - cmovlbs r4, r14, r6 // Set mchk code if read NXM - cmovlbs r4, 1, r4 - bis r4, r5, r5 // Accumulate retry bit -#endif - - - //+ - // Write the logout frame - // - // Current state: - // r0 - fill_syn - // r1 - icperr_stat - // r4 - available - // r5<0> - retry flag - // r6 - mchk code - // r8 - dcperr_stat - // r9 - sc_addr - // r10 - sc_stat - // r12 - ei_addr - // r13 - bc_tag_addr - // r14 - available - // r25 - ei_stat (shifted) - // pt0 - saved r0 - // pt1 - saved r1 - // pt4 - saved r4 - // pt5 - saved r5 - // pt6 - saved r6 - // pt10 - saved exc_addr - // - //- - -sys_mchk_write_logout_frame: - // Get base of the logout area. - GET_IMPURE(r14) // addr of per-cpu impure area - GET_ADDR(r14,pal_logout_area+mchk_mchk_base,r14) - - // Write the first 2 quadwords of the logout area: - - sll r5, 63, r5 // Move retry flag to bit 63 - lda r4, mchk_size(r5) // Combine retry flag and frame size - stqp r4, mchk_flag(r14) // store flag/frame size - lda r4, mchk_sys_base(r31) // sys offset - sll r4, 32, r4 - lda r4, mchk_cpu_base(r4) // cpu offset - stqp r4, mchk_offsets(r14) // store sys offset/cpu offset into logout frame - - //+ - // Write the mchk code to the logout area - // Write error IPRs already fetched to the logout area - // Restore some GPRs from PALtemps - //- - - mfpr r5, pt5 - stqp r6, mchk_mchk_code(r14) - mfpr r4, pt4 - stqp r1, mchk_ic_perr_stat(r14) - mfpr r6, pt6 - stqp r8, mchk_dc_perr_stat(r14) - mfpr r1, pt1 - stqp r9, mchk_sc_addr(r14) - stqp r10, mchk_sc_stat(r14) - stqp r12, mchk_ei_addr(r14) - stqp r13, mchk_bc_tag_addr(r14) - stqp r0, mchk_fill_syn(r14) - mfpr r0, pt0 - sll r25, ei_stat_v_bc_tperr, r25 // Move EI_STAT status bits back to expected position - // retrieve lower 28 bits again from ei_stat and restore before storing to logout frame - ldah r13, 0xfff0(r31) - zapnot r13, 0x1f, r13 - ldqp r13, ei_stat(r13) - sll r13, 64-ei_stat_v_bc_tperr, r13 - srl r13, 64-ei_stat_v_bc_tperr, r13 - or r25, r13, r25 - stqp r25, mchk_ei_stat(r14) - - - - - //+ - // complete the CPU-specific part of the logout frame - //- - -#ifndef SIMOS - // cant' assemble.Where is the macro ? - mchk_logout mm_stat - mchk_logout va // Unlocks VA and MM_STAT - mchk_logout isr - mchk_logout icsr - mchk_logout pal_base - mchk_logout exc_mask - mchk_logout exc_sum -#endif - - ldah r13, 0xfff0(r31) - zap r13, 0xE0, r13 // Get Cbox IPR base - ldqp r13, ld_lock(r13) // Get ld_lock IPR - stqp r13, mchk_ld_lock(r14) // and stash it in the frame - - //+ - // complete the PAL-specific part of the logout frame - //- -#ifdef vms - t = 0 - .repeat 24 - pt_mchk_logout \t - t = t + 1 - .endr -#endif -#ifndef SIMOS - //can't assemble ? - pt_mchk_logout 0 - pt_mchk_logout 1 - pt_mchk_logout 2 - pt_mchk_logout 3 - pt_mchk_logout 4 - pt_mchk_logout 5 - pt_mchk_logout 6 - pt_mchk_logout 7 - pt_mchk_logout 8 - pt_mchk_logout 9 - pt_mchk_logout 10 - pt_mchk_logout 11 - pt_mchk_logout 12 - pt_mchk_logout 13 - pt_mchk_logout 14 - pt_mchk_logout 15 - pt_mchk_logout 16 - pt_mchk_logout 17 - pt_mchk_logout 18 - pt_mchk_logout 19 - pt_mchk_logout 20 - pt_mchk_logout 21 - pt_mchk_logout 22 - pt_mchk_logout 23 -#endif - - - //+ - // Log system specific info here - //- - -#if alpha_fw != 0 -// .if ne alpha_fw -storeTLEP_: - lda r13, 0xffc4(r31) // Get GBUS$MISCR address - sll r13, 24, r13 - ldqp r13, 0(r13) // Read GBUS$MISCR - sll r13, 16, r13 // shift up to proper field - mfpr r8, pt_whami // get our node id - extbl r8, 1, r8 // shift to bit 0 - or r13, r8, r13 // merge MISCR and WHAMI - stlp r13, mchk$gbus(r14) // write to logout area - srl r8, 1, r8 // shift off cpu number - - Get_TLSB_Node_Address r8,r13 // compute our nodespace address - - OSFmchk_TLEPstore tldev, tlsb=1 - OSFmchk_TLEPstore tlber, tlsb=1, clr=1 - OSFmchk_TLEPstore tlcnr, tlsb=1 - OSFmchk_TLEPstore tlvid, tlsb=1 - OSFmchk_TLEPstore tlesr0, tlsb=1, clr=1 - OSFmchk_TLEPstore tlesr1, tlsb=1, clr=1 - OSFmchk_TLEPstore tlesr2, tlsb=1, clr=1 - OSFmchk_TLEPstore tlesr3, tlsb=1, clr=1 - OSFmchk_TLEPstore tlmodconfig - OSFmchk_TLEPstore tlepaerr, clr=1 - OSFmchk_TLEPstore tlepderr, clr=1 - OSFmchk_TLEPstore tlepmerr, clr=1 - OSFmchk_TLEPstore tlintrmask0 - OSFmchk_TLEPstore tlintrmask1 - OSFmchk_TLEPstore tlintrsum0 - OSFmchk_TLEPstore tlintrsum1 - OSFmchk_TLEPstore tlep_vmg -// .endc -#endif /*alpha_fw != 0 */ - // Unlock IPRs - lda r8, (BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31) - mtpr r8, dcperr_stat // Clear Dcache parity error status - - lda r8, (BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(r31) - mtpr r8, icperr_stat // Clear Icache parity error & timeout status - -1: ldqp r8, mchk_ic_perr_stat(r14) // get ICPERR_STAT value - GET_ADDR(r0,0x1800,r31) // get ICPERR_STAT value - and r0, r8, r0 // compare - beq r0, 2f // check next case if nothing set - lda r0, mchk_c_retryable_ird(r31) // set new MCHK code - br r31, do_670 // setup new vector - -2: ldqp r8, mchk_dc_perr_stat(r14) // get DCPERR_STAT value - GET_ADDR(r0,0x3f,r31) // get DCPERR_STAT value - and r0, r8, r0 // compare - beq r0, 3f // check next case if nothing set - lda r0, mchk_c_dcperr(r31) // set new MCHK code - br r31, do_670 // setup new vector - -3: ldqp r8, mchk_sc_stat(r14) // get SC_STAT value - GET_ADDR(r0,0x107ff,r31) // get SC_STAT value - and r0, r8, r0 // compare - beq r0, 4f // check next case if nothing set - lda r0, mchk_c_scperr(r31) // set new MCHK code - br r31, do_670 // setup new vector - -4: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value - GET_ADDR(r0,0x30000000,r31) // get EI_STAT value - and r0, r8, r0 // compare - beq r0, 5f // check next case if nothing set - lda r0, mchk_c_bcperr(r31) // set new MCHK code - br r31, do_670 // setup new vector - -5: ldlp r8, mchk_tlber(r14) // get TLBER value - GET_ADDR(r0,0xfe01,r31) // get high TLBER mask value - sll r0, 16, r0 // shift into proper position - GET_ADDR(r1,0x03ff,r31) // get low TLBER mask value - or r0, r1, r0 // merge mask values - and r0, r8, r0 // compare - beq r0, 6f // check next case if nothing set - GET_ADDR(r0, 0xfff0, r31) // set new MCHK code - br r31, do_660 // setup new vector - -6: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value - GET_ADDR(r0,0xff7f,r31) // get TLEPAERR mask value - and r0, r8, r0 // compare - beq r0, 7f // check next case if nothing set - GET_ADDR(r0, 0xfffa, r31) // set new MCHK code - br r31, do_660 // setup new vector - -7: ldlp r8, mchk_tlepderr(r14) // get TLEPDERR value - GET_ADDR(r0,0x7,r31) // get TLEPDERR mask value - and r0, r8, r0 // compare - beq r0, 8f // check next case if nothing set - GET_ADDR(r0, 0xfffb, r31) // set new MCHK code - br r31, do_660 // setup new vector - -8: ldlp r8, mchk_tlepmerr(r14) // get TLEPMERR value - GET_ADDR(r0,0x3f,r31) // get TLEPMERR mask value - and r0, r8, r0 // compare - beq r0, 9f // check next case if nothing set - GET_ADDR(r0, 0xfffc, r31) // set new MCHK code - br r31, do_660 // setup new vector - -9: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value - GET_ADDR(r0,0xb,r31) // get EI_STAT mask value - sll r0, 32, r0 // shift to upper lw - and r0, r8, r0 // compare - beq r0, 1f // check next case if nothing set - GET_ADDR(r0,0xfffd,r31) // set new MCHK code - br r31, do_660 // setup new vector - -1: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value - GET_ADDR(r0,0x80,r31) // get TLEPAERR mask value - and r0, r8, r0 // compare - beq r0, cont_logout_frame // check next case if nothing set - GET_ADDR(r0, 0xfffe, r31) // set new MCHK code - br r31, do_660 // setup new vector - -do_670: lda r8, scb_v_procmchk(r31) // SCB vector - br r31, do_6x0_cont -do_660: lda r8, scb_v_sysmchk(r31) // SCB vector -do_6x0_cont: - sll r8, 16, r8 // shift to proper position - mfpr r1, pt_misc // fetch current pt_misc - GET_ADDR(r4,0xffff, r31) // mask for vector field - sll r4, 16, r4 // shift to proper position - bic r1, r4, r1 // clear out old vector field - or r1, r8, r1 // merge in new vector - mtpr r1, pt_misc // save new vector field - stlp r0, mchk_mchk_code(r14) // save new mchk code - -cont_logout_frame: - // Restore some GPRs from PALtemps - mfpr r0, pt0 - mfpr r1, pt1 - mfpr r4, pt4 - - mfpr r12, pt10 // fetch original PC - blbs r12, sys_machine_check_while_in_pal // MCHK halt if machine check in pal - -//XXXbugnion pvc_jsr armc, bsr=1 - bsr r12, sys_arith_and_mchk // go check for and deal with arith trap - - mtpr r31, exc_sum // Clear Exception Summary - - mfpr r25, pt10 // write exc_addr after arith_and_mchk to pickup new pc - stqp r25, mchk_exc_addr(r14) - - //+ - // Set up the km trap - //- - - -sys_post_mchk_trap: - mfpr r25, pt_misc // Check for flag from mchk interrupt - extwl r25, 4, r25 - blbs r25, sys_mchk_stack_done // Stack from already pushed if from interrupt flow - - bis r14, r31, r12 // stash pointer to logout area - mfpr r14, pt10 // get exc_addr - - sll r11, 63-3, r25 // get mode to msb - bge r25, 3f - - mtpr r31, dtb_cm - mtpr r31, ev5__ps - - mtpr r30, pt_usp // save user stack - mfpr r30, pt_ksp - -3: - lda sp, 0-osfsf_c_size(sp) // allocate stack space - nop - - stq r18, osfsf_a2(sp) // a2 - stq r11, osfsf_ps(sp) // save ps - - stq r14, osfsf_pc(sp) // save pc - mfpr r25, pt_entint // get the VA of the interrupt routine - - stq r16, osfsf_a0(sp) // a0 - lda r16, osfint_c_mchk(r31) // flag as mchk in a0 - - stq r17, osfsf_a1(sp) // a1 - mfpr r17, pt_misc // get vector - - stq r29, osfsf_gp(sp) // old gp - mtpr r25, exc_addr // - - or r31, 7, r11 // get new ps (km, high ipl) - subq r31, 1, r18 // get a -1 - - extwl r17, 2, r17 // a1 <- interrupt vector - bis r31, ipl_machine_check, r25 - - mtpr r25, ipl // Set internal ipl - srl r18, 42, r18 // shift off low bits of kseg addr - - sll r18, 42, r18 // shift back into position - mfpr r29, pt_kgp // get the kern r29 - - or r12, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address - hw_rei_spe // out to interrupt dispatch routine - - - //+ - // The stack is pushed. Load up a0,a1,a2 and vector via entInt - // - //- - ALIGN_BRANCH -sys_mchk_stack_done: - lda r16, osfint_c_mchk(r31) // flag as mchk/crd in a0 - lda r17, scb_v_sysmchk(r31) // a1 <- interrupt vector - - subq r31, 1, r18 // get a -1 - mfpr r25, pt_entInt - - srl r18, 42, r18 // shift off low bits of kseg addr - mtpr r25, exc_addr // load interrupt vector - - sll r18, 42, r18 // shift back into position - or r14, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address - - hw_rei_spe // done - - - ALIGN_BRANCH -sys_cpu_mchk_not_retryable: - mfpr r6, pt_misc - extwl r6, 4, r6 // Fetch mchk code - br r31, sys_mchk_write_logout_frame // - - - -//+ -//sys$double_machine_check - a machine check was started, but MCES<MCHK> was -// already set. We will now double machine check halt. -// -// pt0 - old R0 -// -//+ - -EXPORT(sys_double_machine_check) -#ifndef SIMOS - pvc$jsr updpcb, bsr=1 - bsr r0, pal_update_pcb // update the pcb -#endif - lda r0, hlt_c_dbl_mchk(r31) - br r31, sys_enter_console - -//+ -//sys$machine_check_while_in_pal - a machine check was started, exc_addr points to -// a PAL PC. We will now machine check halt. -// -// pt0 - old R0 -// -//+ -sys_machine_check_while_in_pal: - stqp r12, mchk_exc_addr(r14) // exc_addr has not yet been written - -#ifndef SIMOS - pvc$jsr updpcb, bsr=1 - bsr r0, pal_update_pcb // update the pcb -#endif - lda r0, hlt_c_mchk_from_pal(r31) - br r31, sys_enter_console - - -//ARITH and MCHK -// Check for arithmetic errors and build trap frame, -// but don't post the trap. -// on entry: -// pt10 - exc_addr -// r12 - return address -// r14 - logout frame pointer -// r13 - available -// r8,r9,r10 - available except across stq's -// pt0,1,6 - available -// -// on exit: -// pt10 - new exc_addr -// r17 = exc_mask -// r16 = exc_sum -// r14 - logout frame pointer -// - ALIGN_BRANCH -sys_arith_and_mchk: - mfpr r13, ev5__exc_sum - srl r13, exc_sum_v_swc, r13 - bne r13, handle_arith_and_mchk - -// XXX bugnion pvc$jsr armc, bsr=1, dest=1 - ret r31, (r12) // return if no outstanding arithmetic error - -handle_arith_and_mchk: - mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel - - // no virt ref for next 2 cycles - mtpr r14, pt0 - - mtpr r1, pt1 // get a scratch reg - and r11, osfps_m_mode, r1 // get mode bit - - bis r11, r31, r25 // save ps - beq r1, 1f // if zero we are in kern now - - bis r31, r31, r25 // set the new ps - mtpr r30, pt_usp // save user stack - - mfpr r30, pt_ksp // get kern stack -1: - mfpr r14, exc_addr // get pc into r14 in case stack writes fault - - lda sp, 0-osfsf_c_size(sp) // allocate stack space - mtpr r31, ev5__ps // Set Ibox current mode to kernel - - mfpr r1, pt_entArith - stq r14, osfsf_pc(sp) // save pc - - stq r17, osfsf_a1(sp) - mfpr r17, ev5__exc_mask // Get exception register mask IPR - no mtpr exc_sum in next cycle - - stq r29, osfsf_gp(sp) - stq r16, osfsf_a0(sp) // save regs - - bis r13, r31, r16 // move exc_sum to r16 - stq r18, osfsf_a2(sp) - - stq r11, osfsf_ps(sp) // save ps - mfpr r29, pt_kgp // get the kern gp - - mfpr r14, pt0 // restore logout frame pointer from pt0 - bis r25, r31, r11 // set new ps - - mtpr r1, pt10 // Set new PC - mfpr r1, pt1 - -// XXX bugnion pvc$jsr armc, bsr=1, dest=1 - ret r31, (r12) // return if no outstanding arithmetic error - - - -// .sbttl "SYS$ENTER_CONSOLE - Common PALcode for ENTERING console" - - ALIGN_BLOCK - -// SYS$enter_console -// -// Entry: -// Entered when PAL wants to enter the console. -// usually as the result of a HALT instruction or button, -// or catastrophic error. -// -// Regs on entry... -// -// R0 = halt code -// pt0 <- r0 -// -// Function: -// -// Save all readable machine state, and "call" the console -// -// Returns: -// -// -// Notes: -// -// In these routines, once the save state routine has been executed, -// the remainder of the registers become scratchable, as the only -// "valid" copy of them is the "saved" copy. -// -// Any registers or PTs that are modified before calling the save -// routine will have there data lost. The code below will save all -// state, but will loose pt 0,4,5. -// -//- - -EXPORT(sys_enter_console) - mtpr r1, pt4 - mtpr r3, pt5 -#ifdef SIMOS - subq r31, 1, r1 - sll r1, 42, r1 - ldah r1, 1(r1) -#else /* SIMOS */ - lda r3, pal_enter_console_ptr(r31) //find stored vector - ldqp r1, 0(r3) -#endif /* SIMOS */ - -#ifdef SIMOS - /* taken from scrmax, seems like the obvious thing to do */ - mtpr r1, exc_addr - mfpr r1, pt4 - mfpr r3, pt5 - STALL - STALL - hw_rei_stall -#else - pvc$violate 1007 - jmp r31, (r1) // off to common routine -#endif - - -// .sbttl "SYS$EXIT_CONSOLE - Common PALcode for ENTERING console" -//+ -// sys$exit_console -// -// Entry: -// Entered when console wants to reenter PAL. -// usually as the result of a CONTINUE. -// -// -// Regs' on entry... -// -// -// Function: -// -// Restore all readable machine state, and return to user code. -// -// -// -//- - ALIGN_BLOCK -sys_exit_console: - //Disable physical mode: -#if enable_physical_console != 0 -// .if ne enable_physical_console - mfpr r25, pt_ptbr - bic r25, 1, r25 // clear physical console flag - mtpr r25, pt_ptbr -#endif - - GET_IMPURE(r1) - - // clear lock and intr_flags prior to leaving console - rc r31 // clear intr_flag - // lock flag cleared by restore_state -#ifndef SIMOS - pvc$jsr rststa, bsr=1 - bsr r3, pal_restore_state // go restore all state - // note, R1 and R3 are NOT restored - // by restore_state. -#endif - // TB's have been flushed - - ldqp r3, (cns_gpr+(8*3))(r1) // restore r3 - ldqp r1, (cns_gpr+8)(r1) // restore r1 - hw_rei_stall // back to user - -#if turbo_pcia_intr_fix != 0 -// .if ne turbo_pcia_intr_fix -check_pcia_intr: - mfpr r14, pt14 // fetch saved PCIA interrupt info - beq r14, check_done // don't bother checking if no info - mfpr r13, ipl // check the current IPL - bic r13, 3, r25 // isolate ipl<5:2> - cmpeq r25, 0x14, r25 // is it an I/O interrupt? - beq r25, check_done // no, return - and r13, 3, r25 // get I/O interrupt index - extbl r14, r25, r13 // extract info for this interrupt - beq r13, check_done // if no info, return - - // This is an RTI from a PCIA interrupt - lda r12, 1(r31) // get initial bit mask - sll r12, r25, r25 // shift to select interrupt index - zap r14, r25, r14 // clear out info from this interrupt - mtpr r14, pt14 // and save it - - and r13, 3, r25 // isolate HPC field - subq r25, 1, r25 // subtract 1 to get HPC number - srl r13, 2, r13 // generate base register address - sll r13, 6, r13 // get slot/hose address bits - lda r13, 0x38(r13) // insert other high bits - sll r13, 28, r13 // shift high bits into position - - // Read the IPROGx register - sll r25, 21, r14 // HPC address bit position - or r13, r14, r14 // add in upper bits - lda r14, 0x400(r14) // add in lower bits - ldqp r14, 0(r14) // read IPROG - srl r14, 4, r12 // check the In Progress bit - blbc r12, 1f // skip if none in progress - and r14, 0xf, r14 // isolate interrupt source - lda r12, 1(r31) // make initial mask - sll r12, r14, r14 // shift to make new intr source mask - br r31, 2f - // Write the SMPLIRQx register -1: or r31, r31, r14 // default interrupt source mask -2: GET_ADDR(r12, 0xffff, r31) // default SMPLIRQx data - bic r12, r14, r12 // clear any interrupts in progres -//orig lda r14, <0xbffc@-2>(r31) // get register address bits - lda r14,(0xbffc>>2)(r31) - - sll r14, 10, r14 // shift into position - or r14, r13, r14 // add in upper bits - sll r25, 8, r25 // shift HPC number into position - or r14, r25, r14 // add in lower bits - stqp r12, 0(r14) // write SMPLIRQx register - mb - ldqp r12, 0(r14) // read it back - bis r12, r12, r12 // touch register to insure completion - -check_done: // do these now and return - lda r25, osfsf_c_size(sp) // get updated sp - bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr - br r31, pcia_check_return -#endif - - -// .sbttl KLUDGE_INITIAL_PCBB - PCB for Boot use only - - ALIGN_128 -.globl kludge_initial_pcbb -kludge_initial_pcbb: // PCB is 128 bytes long -// .repeat 16 -// .quad 0 -// .endr - - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop - nop - nop - - nop - nop - nop - nop - -// .sbttl "SET_SC_BC_CTL subroutine" -// -// Subroutine to set the SC_CTL, BC_CONFIG, and BC_CTL registers and flush the Scache -// There must be no outstanding memory references -- istream or dstream -- when -// these registers are written. EV5 prefetcher is difficult to turn off. So, -// this routine needs to be exactly 32 instructions long// the final jmp must -// be in the last octaword of a page (prefetcher doesn't go across page) -// -// -// Register expecations: -// r0 base address of CBOX iprs -// r5 value to set sc_ctl to (flush bit is added in) -// r6 value to set bc_ctl to -// r7 value to set bc_config to -// r10 return address -// r19 old sc_ctl value -// r20 old value of bc_ctl -// r21 old value of bc_config -// r23 flush scache flag -// Register usage: -// r17 sc_ctl with flush bit cleared -// r22 loop address -// -// -#ifndef SIMOS - align_page <32*4> // puts start of routine at next page boundary minus 32 longwords. -#endif - -set_sc_bc_ctl: - -#ifndef SIMOS - br r22, sc_ctl_loop //this branch must be in the same 4 instruction block as it's dest -sc_ctl_loop: -// XXX bugnion pvc$jsr scloop, dest=1 - mb - mb - - bis r5, r23, r5 //r5 <- same sc_ctl with flush bit set (if flag set in r23) - - stqp r19, ev5__sc_ctl(r0) // write sc_ctl - stqp r20, ev5__bc_ctl(r0) // write bc_ctl - bis r31, r6, r20 // update r20 with new bc_ctl for 2nd time through loop - stqp r21, bc_config(r0) // write bc_config register - bis r31, r7, r21 // update r21 with new bc_config for 2nd time through loop - - bic r19, BIT(sc_ctl_v_sc_flush), r17 //r17 <- same sc_ctl without flush bit set - //NOTE: only works because flush bit is in lower 16 bits - - wmb // don't merge with other writes - stqp r17, ev5__sc_ctl(r0) // write sc_ctl without flush bit - ldqp r17, ev5__sc_ctl(r0) // read sc_ctl - bis r17, r17, r17 // stall until the data comes back - bis r31, r5, r19 // update r19 with new sc_ctl for 2nd time through loop - - // fill with requisite number of nops (unops ok) to make exactly 32 instructions in loop - t = 0 - .repeat 15 - unop - t = t + 1 - .endr - $opdef mnemonic= myjmp, - - format= <custom=iregister, iregister, branch_offset>, - - encoding= <26:31=0x1A, 21:25=%OP1,16:20=%OP2,14:15=0x00,0:13=%op3> - -// XXXbugnion pvc$jsr scloop - myjmp r22,r22,sc_ctl_loop // first time, jump to sc_ctl_loop (hint will cause prefetcher to go to loop instead - // of straight) // r22 gets sc_ctl_done - // 2nd time, code continues at sc_ctl_done (I hope) -sc_ctl_done: -// XXX bugnion pvc$jsr scloop, dest=1 -// XXX bugnion pvc$jsr scbcctl -#endif /*SIMOS*/ - ret r31, (r10) // return to where we came from - - -.end - - - - |