diff options
Diffstat (limited to 'configs/common/HMC.py')
-rw-r--r-- | configs/common/HMC.py | 390 |
1 files changed, 290 insertions, 100 deletions
diff --git a/configs/common/HMC.py b/configs/common/HMC.py index 130729f88..fcff94cc7 100644 --- a/configs/common/HMC.py +++ b/configs/common/HMC.py @@ -37,6 +37,7 @@ # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # # Authors: Erfan Azarkhish +# Abdul Mutaal Ahmad # A Simplified model of a complete HMC device. Based on: # [1] http://www.hybridmemorycube.org/specification-download/ @@ -48,6 +49,10 @@ # (G. Kim et. al) # [5] Near Data Processing, Are we there yet? (M. Gokhale) # http://www.cs.utah.edu/wondp/gokhale.pdf +# [6] openHMC - A Configurable Open-Source Hybrid Memory Cube Controller +# (J. Schmidt) +# [7] Hybrid Memory Cube performance characterization on data-centric +# workloads (M. Gokhale) # # This script builds a complete HMC device composed of vault controllers, # serial links, the main internal crossbar, and an external hmc controller. @@ -60,23 +65,62 @@ # This component is simply an instance of the NoncoherentXBar class, and its # parameters are tuned to [2]. # -# - SERIAL LINKS: +# - SERIAL LINKS CONTROLLER: # SerialLink is a simple variation of the Bridge class, with the ability to -# account for the latency of packet serialization. We assume that the -# serializer component at the transmitter side does not need to receive the -# whole packet to start the serialization. But the deserializer waits for -# the complete packet to check its integrity first. +# account for the latency of packet serialization and controller latency. We +# assume that the serializer component at the transmitter side does not need +# to receive the whole packet to start the serialization. But the +# deserializer waits for the complete packet to check its integrity first. +# # * Bandwidth of the serial links is not modeled in the SerialLink component -# itself. Instead bandwidth/port of the HMCController has been adjusted to -# reflect the bandwidth delivered by 1 serial link. +# itself. +# +# * Latency of serial link controller is composed of SerDes latency + link +# controller # -# - HMC CONTROLLER: -# Contains a large buffer (modeled with Bridge) to hide the access latency -# of the memory cube. Plus it simply forwards the packets to the serial -# links in a round-robin fashion to balance load among them. # * It is inferred from the standard [1] and the literature [3] that serial # links share the same address range and packets can travel over any of # them so a load distribution mechanism is required among them. +# +# ----------------------------------------- +# | Host/HMC Controller | +# | ---------------------- | +# | | Link Aggregator | opt | +# | ---------------------- | +# | ---------------------- | +# | | Serial Link + Ser | * 4 | +# | ---------------------- | +# |--------------------------------------- +# ----------------------------------------- +# | Device +# | ---------------------- | +# | | Xbar | * 4 | +# | ---------------------- | +# | ---------------------- | +# | | Vault Controller | * 16 | +# | ---------------------- | +# | ---------------------- | +# | | Memory | | +# | ---------------------- | +# |---------------------------------------| +# +# In this version we have present 3 different HMC archiecture along with +# alongwith their corresponding test script. +# +# same: It has 4 crossbars in HMC memory. All the crossbars are connected +# to each other, providing complete memory range. This archicture also covers +# the added latency for sending a request to non-local vault(bridge in b/t +# crossbars). All the 4 serial links can access complete memory. So each +# link can be connected to separate processor. +# +# distributed: It has 4 crossbars inside the HMC. Crossbars are not +# connected.Through each crossbar only local vaults can be accessed. But to +# support this architecture we need a crossbar between serial links and +# processor. +# +# mixed: This is a hybrid architecture. It has 4 crossbars inside the HMC. +# 2 Crossbars are connected to only local vaults. From other 2 crossbar, a +# request can be forwarded to any other vault. import optparse @@ -107,131 +151,277 @@ class HMCSystem(SubSystem): # FIFOs at the input and output of the inteconnect) xbar_response_latency = Param.Cycles(2, "Response latency of the XBar") - #*****************************SERIAL LINK PARAMETERS********************** - # Number of serial links [1] - num_serial_links = Param.Unsigned(4, "Number of serial links") + # number of cross which connects 16 Vaults to serial link[7] + number_mem_crossbar = Param.Unsigned(4, "Number of crossbar in HMC" + ) + + #*****************************SERIAL LINK PARAMETERS*********************** + # Number of serial links controllers [1] + num_links_controllers = Param.Unsigned(4, "Number of serial links") # Number of packets (not flits) to store at the request side of the serial # link. This number should be adjusted to achive required bandwidth - link_buffer_size_req = Param.Unsigned(16, "Number of packets to buffer " + link_buffer_size_req = Param.Unsigned(10, "Number of packets to buffer " "at the request side of the serial link") # Number of packets (not flits) to store at the response side of the serial # link. This number should be adjusted to achive required bandwidth - link_buffer_size_rsp = Param.Unsigned(16, "Number of packets to buffer " + link_buffer_size_rsp = Param.Unsigned(10, "Number of packets to buffer " "at the response side of the serial link") # Latency of the serial link composed by SER/DES latency (1.6ns [4]) plus # the PCB trace latency (3ns Estimated based on [5]) link_latency = Param.Latency('4.6ns', "Latency of the serial links") - # Header overhead of the serial links: Header size is 128bits in HMC [1], - # and we have 16 lanes, so the overhead is 8 cycles - link_overhead = Param.Cycles(8, "The number of cycles required to" - " transmit the packet header over the serial link") - - # Clock frequency of the serial links [1] + # Clock frequency of the each serial link(SerDes) [1] link_frequency = Param.Frequency('10GHz', "Clock Frequency of the serial" "links") - # Number of parallel lanes in each serial link [1] - num_lanes_per_link = Param.Unsigned(16, "Number of lanes per each link") + # Clock frequency of serial link Controller[6] + # clk_hmc[Mhz]= num_lanes_per_link * lane_speed [Gbits/s] / + # data_path_width * 10^6 + # clk_hmc[Mhz]= 16 * 10 Gbps / 256 * 10^6 = 625 Mhz + link_controller_frequency = Param.Frequency('625MHz', + "Clock Frequency of the link controller") - # Number of serial links [1] - num_serial_links = Param.Unsigned(4, "Number of serial links") + # Latency of the serial link controller to process the packets[1][6] + # (ClockDomain = 625 Mhz ) + # used here for calculations only + link_ctrl_latency = Param.Cycles(4, "The number of cycles required for the" + "controller to process the packet") - #*****************************HMC CONTROLLER PARAMETERS******************* - # Number of packets (not flits) to store at the HMC controller. This - # number should be high enough to be able to hide the high latency of HMC - ctrl_buffer_size_req = Param.Unsigned(256, "Number of packets to buffer " - "at the HMC controller (request side)") + # total_ctrl_latency = link_ctrl_latency + link_latency + # total_ctrl_latency = 4(Cycles) * 1.6 ns + 4.6 ns + total_ctrl_latency = Param.Latency('11ns', "The latency experienced by" + "every packet regardless of size of packet") - # Number of packets (not flits) to store at the response side of the HMC - # controller. - ctrl_buffer_size_rsp = Param.Unsigned(256, "Number of packets to buffer " - "at the HMC controller (response side)") + # Number of parallel lanes in each serial link [1] + num_lanes_per_link = Param.Unsigned( 16, "Number of lanes per each link") - # Latency of the HMC controller to process the packets - # (ClockDomain = Host clock domain) - ctrl_latency = Param.Cycles(4, "The number of cycles required for the " - " controller to process the packet") + # Number of serial links [1] + num_serial_links = Param.Unsigned(4, "Number of serial links") - # Wiring latency from the SoC crossbar to the HMC controller - ctrl_static_latency = Param.Latency('500ps', "Static latency of the HMC" - "controller") + # speed of each lane of serial link - SerDes serial interface 10 Gb/s + serial_link_speed = Param.UInt64(10, "Gbs/s speed of each lane of" + "serial link") - #*****************************PERFORMANCE MONITORING********************** + #*****************************PERFORMANCE MONITORING************************ # The main monitor behind the HMC Controller - enable_global_monitor = Param.Bool(True, "The main monitor behind the " + enable_global_monitor = Param.Bool(False, "The main monitor behind the " "HMC Controller") # The link performance monitors - enable_link_monitor = Param.Bool(True, "The link monitors") + enable_link_monitor = Param.Bool(False, "The link monitors" ) + + # link aggregator enable - put a cross between buffers & links + enable_link_aggr = Param.Bool(False, "The crossbar between port and " + "Link Controller") + + enable_buff_div = Param.Bool(True, "Memory Range of Buffer is" + "divided between total range") + + #*****************************HMC ARCHITECTURE ************************ + # Memory chunk for 16 vault - numbers of vault / number of crossbars + mem_chunk = Param.Unsigned(4, "Chunk of memory range for each cross bar " + "in arch 0") + + # size of req buffer within crossbar, used for modelling extra latency + # when the reuqest go to non-local vault + xbar_buffer_size_req = Param.Unsigned(10, "Number of packets to buffer " + "at the request side of the crossbar") + + # size of response buffer within crossbar, used for modelling extra latency + # when the response received from non-local vault + xbar_buffer_size_resp = Param.Unsigned(10, "Number of packets to buffer " + "at the response side of the crossbar") + +# configure host system with Serial Links +def config_host_hmc(options, system): + + system.hmc_host=HMCSystem() + + try: + system.hmc_host.enable_global_monitor = options.enable_global_monitor + except: + pass; + + try: + system.hmc_host.enable_link_monitor = options.enable_link_monitor + except: + pass; + + # Serial link Controller with 16 SerDes links at 10 Gbps + # with serial link ranges w.r.t to architecture + system.hmc_host.seriallink = [SerialLink(ranges = options.ser_ranges[i], + req_size=system.hmc_host.link_buffer_size_req, + resp_size=system.hmc_host.link_buffer_size_rsp, + num_lanes=system.hmc_host.num_lanes_per_link, + link_speed=system.hmc_host.serial_link_speed, + delay=system.hmc_host.total_ctrl_latency) + for i in xrange(system.hmc_host.num_serial_links)] + + # enable global monitor + if system.hmc_host.enable_global_monitor: + system.hmc_host.lmonitor = [ CommMonitor() + for i in xrange(system.hmc_host.num_serial_links)] + + # set the clock frequency for serial link + for i in xrange(system.hmc_host.num_serial_links): + system.hmc_host.seriallink[i].clk_domain = SrcClockDomain(clock=system. + hmc_host.link_controller_frequency, voltage_domain= + VoltageDomain(voltage = '1V')) + + # Connect membus/traffic gen to Serial Link Controller for differrent HMC + # architectures + if options.arch == "distributed": + for i in xrange(system.hmc_host.num_links_controllers): + if system.hmc_host.enable_global_monitor: + system.membus.master = system.hmc_host.lmonitor[i].slave + system.hmc_host.lmonitor[i].master = \ + system.hmc_host.seriallink[i].slave + else: + system.membus.master = system.hmc_host.seriallink[i].slave + if options.arch == "mixed": + if system.hmc_host.enable_global_monitor: + system.membus.master = system.hmc_host.lmonitor[0].slave + system.hmc_host.lmonitor[0].master = \ + system.hmc_host.seriallink[0].slave + + system.membus.master = system.hmc_host.lmonitor[1].slave + system.hmc_host.lmonitor[1].master = \ + system.hmc_host.seriallink[1].slave + + system.tgen[2].port = system.hmc_host.lmonitor[2].slave + system.hmc_host.lmonitor[2].master = \ + system.hmc_host.seriallink[2].slave + + system.tgen[3].port = system.hmc_host.lmonitor[3].slave + system.hmc_host.lmonitor[3].master = \ + system.hmc_host.seriallink[3].slave + else: + system.membus.master = system.hmc_host.seriallink[0].slave + system.membus.master = system.hmc_host.seriallink[1].slave + system.tgen[2].port = system.hmc_host.seriallink[2].slave + system.tgen[3].port = system.hmc_host.seriallink[3].slave + if options.arch == "same" : + for i in xrange(system.hmc_host.num_links_controllers): + if system.hmc_host.enable_global_monitor: + system.tgen[i].port = system.hmc_host.lmonitor[i].slave + system.hmc_host.lmonitor[i].master = \ + system.hmc_host.seriallink[i].slave + else: + system.tgen[i].port = system.hmc_host.seriallink[i].slave + + return system # Create an HMC device and attach it to the current system -def config_hmc(options, system): +def config_hmc(options, system, hmc_host): - system.hmc = HMCSystem() + # Create HMC device + system.hmc_dev = HMCSystem() - system.buffer = Bridge(ranges=system.mem_ranges, - req_size=system.hmc.ctrl_buffer_size_req, - resp_size=system.hmc.ctrl_buffer_size_rsp, - delay=system.hmc.ctrl_static_latency) + # Global monitor try: - system.hmc.enable_global_monitor = options.enable_global_monitor + system.hmc_dev.enable_global_monitor = options.enable_global_monitor except: pass; try: - system.hmc.enable_link_monitor = options.enable_link_monitor + system.hmc_dev.enable_link_monitor = options.enable_link_monitor except: pass; - system.membus.master = system.buffer.slave - - # The HMC controller (Clock domain is the same as the host) - system.hmccontroller = HMCController(width=(system.hmc.num_lanes_per_link. - value * system.hmc.num_serial_links/8), - frontend_latency=system.hmc.ctrl_latency, - forward_latency=system.hmc.link_overhead, - response_latency=system.hmc.link_overhead) - - system.hmccontroller.clk_domain = SrcClockDomain(clock=system.hmc. - link_frequency, voltage_domain = VoltageDomain(voltage = '1V')) - - # Serial Links - system.hmc.seriallink =[ SerialLink(ranges = system.mem_ranges, - req_size=system.hmc.link_buffer_size_req, - resp_size=system.hmc.link_buffer_size_rsp, - num_lanes=system.hmc.num_lanes_per_link, - delay=system.hmc.link_latency) - for i in xrange(system.hmc.num_serial_links)] - - if system.hmc.enable_link_monitor: - system.hmc.lmonitor = [ CommMonitor() - for i in xrange(system.hmc.num_serial_links)] - - # The HMC Crossbar located in its logic-base (LoB) - system.hmc.xbar = NoncoherentXBar(width = system.hmc.xbar_width, - frontend_latency=system.hmc.xbar_frontend_latency, - forward_latency=system.hmc.xbar_forward_latency, - response_latency=system.hmc.xbar_response_latency ) - system.hmc.xbar.clk_domain = SrcClockDomain(clock = - system.hmc.xbar_frequency, voltage_domain = - VoltageDomain(voltage = '1V')) - - if system.hmc.enable_global_monitor: - system.gmonitor = CommMonitor() - system.buffer.master = system.gmonitor.slave - system.gmonitor.master = system.hmccontroller.slave - else: - system.hmccontroller.slave = system.buffer.master - - for i in xrange(system.hmc.num_serial_links): - system.hmccontroller.master = system.hmc.seriallink[i].slave - system.hmc.seriallink[i].clk_domain = system.hmccontroller.clk_domain; - if system.hmc.enable_link_monitor: - system.hmc.seriallink[i].master = system.hmc.lmonitor[i].slave - system.hmc.lmonitor[i].master = system.hmc.xbar.slave + + if system.hmc_dev.enable_link_monitor: + system.hmc_dev.lmonitor = [ CommMonitor() + for i in xrange(system.hmc_dev.num_links_controllers)] + + # 4 HMC Crossbars located in its logic-base (LoB) + system.hmc_dev.xbar = [ NoncoherentXBar(width=system.hmc_dev.xbar_width, + frontend_latency=system.hmc_dev.xbar_frontend_latency, + forward_latency=system.hmc_dev.xbar_forward_latency, + response_latency=system.hmc_dev.xbar_response_latency ) + for i in xrange(system.hmc_host.number_mem_crossbar)] + + for i in xrange(system.hmc_dev.number_mem_crossbar): + system.hmc_dev.xbar[i].clk_domain = SrcClockDomain( + clock=system.hmc_dev.xbar_frequency,voltage_domain= + VoltageDomain(voltage='1V')) + + # Attach 4 serial link to 4 crossbar/s + for i in xrange(system.hmc_dev.num_serial_links): + if system.hmc_dev.enable_link_monitor: + system.hmc_host.seriallink[i].master = \ + system.hmc_dev.lmonitor[i].slave + system.hmc_dev.lmonitor[i].master = system.hmc_dev.xbar[i].slave else: - system.hmc.seriallink[i].master = system.hmc.xbar.slave + system.hmc_host.seriallink[i].master = system.hmc_dev.xbar[i].slave + + # Connecting xbar with each other for request arriving at the wrong xbar, + # then it will be forward to correct xbar. Bridge is used to connect xbars + if options.arch == "same": + numx = len(system.hmc_dev.xbar) + + # create a list of buffers + system.hmc_dev.buffers = [ Bridge( + req_size=system.hmc_dev.xbar_buffer_size_req, + resp_size=system.hmc_dev.xbar_buffer_size_resp) + for i in xrange(numx * (system.hmc_dev.mem_chunk - 1))] + + # Buffer iterator + it = iter(range(len(system.hmc_dev.buffers))) + + # necesarry to add system_port to one of the xbar + system.system_port = system.hmc_dev.xbar[3].slave + + # iterate over all the crossbars and connect them as required + for i in range(numx): + for j in range(numx): + # connect xbar to all other xbars except itself + if i != j: + # get the next index of buffer + index = it.next() + + # Change the default values for ranges of bridge + system.hmc_dev.buffers[index].ranges = system.mem_ranges[ + j * int(system.hmc_dev.mem_chunk): + (j + 1) * int(system.hmc_dev.mem_chunk)] + + # Connect the bridge between corssbars + system.hmc_dev.xbar[i].master = system.hmc_dev.buffers[ + index].slave + system.hmc_dev.buffers[ + index].master = system.hmc_dev.xbar[j].slave + else: + # Don't connect the xbar to itself + pass + + # Two crossbars are connected to all other crossbars-Other 2 vault + # can only direct traffic to it local vaults + if options.arch == "mixed": + + system.hmc_dev.buffer30 = Bridge(ranges=system.mem_ranges[0:4]) + system.hmc_dev.xbar[3].master = system.hmc_dev.buffer30.slave + system.hmc_dev.buffer30.master = system.hmc_dev.xbar[0].slave + + system.hmc_dev.buffer31 = Bridge(ranges=system.mem_ranges[4:8]) + system.hmc_dev.xbar[3].master = system.hmc_dev.buffer31.slave + system.hmc_dev.buffer31.master = system.hmc_dev.xbar[1].slave + + system.hmc_dev.buffer32 = Bridge(ranges=system.mem_ranges[8:12]) + system.hmc_dev.xbar[3].master = system.hmc_dev.buffer32.slave + system.hmc_dev.buffer32.master = system.hmc_dev.xbar[2].slave + + + system.hmc_dev.buffer20 = Bridge(ranges=system.mem_ranges[0:4]) + system.hmc_dev.xbar[2].master = system.hmc_dev.buffer20.slave + system.hmc_dev.buffer20.master = system.hmc_dev.xbar[0].slave + + system.hmc_dev.buffer21 = Bridge(ranges=system.mem_ranges[4:8]) + system.hmc_dev.xbar[2].master = system.hmc_dev.buffer21.slave + system.hmc_dev.buffer21.master = system.hmc_dev.xbar[1].slave + + system.hmc_dev.buffer23 = Bridge(ranges=system.mem_ranges[12:16]) + system.hmc_dev.xbar[2].master = system.hmc_dev.buffer23.slave + system.hmc_dev.buffer23.master = system.hmc_dev.xbar[3].slave + |