summaryrefslogtreecommitdiff
path: root/configs/learning_gem5/part2/simple_memobj.py
diff options
context:
space:
mode:
Diffstat (limited to 'configs/learning_gem5/part2/simple_memobj.py')
-rw-r--r--configs/learning_gem5/part2/simple_memobj.py99
1 files changed, 99 insertions, 0 deletions
diff --git a/configs/learning_gem5/part2/simple_memobj.py b/configs/learning_gem5/part2/simple_memobj.py
new file mode 100644
index 000000000..8d3553dda
--- /dev/null
+++ b/configs/learning_gem5/part2/simple_memobj.py
@@ -0,0 +1,99 @@
+# -*- coding: utf-8 -*-
+# Copyright (c) 2017 Jason Lowe-Power
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met: redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer;
+# redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution;
+# neither the name of the copyright holders nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Authors: Jason Lowe-Power
+
+""" This file creates a barebones system and executes 'hello', a simple Hello
+World application. Adds a simple memobj between the CPU and the membus.
+
+This config file assumes that the x86 ISA was built.
+"""
+
+# import the m5 (gem5) library created when gem5 is built
+import m5
+# import all of the SimObjects
+from m5.objects import *
+
+# create the system we are going to simulate
+system = System()
+
+# Set the clock fequency of the system (and all of its children)
+system.clk_domain = SrcClockDomain()
+system.clk_domain.clock = '1GHz'
+system.clk_domain.voltage_domain = VoltageDomain()
+
+# Set up the system
+system.mem_mode = 'timing' # Use timing accesses
+system.mem_ranges = [AddrRange('512MB')] # Create an address range
+
+# Create a simple CPU
+system.cpu = TimingSimpleCPU()
+
+# Create the simple memory object
+system.memobj = SimpleMemobj()
+
+# Hook the CPU ports up to the cache
+system.cpu.icache_port = system.memobj.inst_port
+system.cpu.dcache_port = system.memobj.data_port
+
+# Create a memory bus, a coherent crossbar, in this case
+system.membus = SystemXBar()
+
+# Connect the memobj
+system.memobj.mem_side = system.membus.slave
+
+# create the interrupt controller for the CPU and connect to the membus
+system.cpu.createInterruptController()
+system.cpu.interrupts[0].pio = system.membus.master
+system.cpu.interrupts[0].int_master = system.membus.slave
+system.cpu.interrupts[0].int_slave = system.membus.master
+
+# Create a DDR3 memory controller and connect it to the membus
+system.mem_ctrl = DDR3_1600_8x8()
+system.mem_ctrl.range = system.mem_ranges[0]
+system.mem_ctrl.port = system.membus.master
+
+# Connect the system up to the membus
+system.system_port = system.membus.slave
+
+# Create a process for a simple "Hello World" application
+process = Process()
+# Set the command
+# cmd is a list which begins with the executable (like argv)
+process.cmd = ['tests/test-progs/hello/bin/x86/linux/hello']
+# Set the cpu to use the process as its workload and create thread contexts
+system.cpu.workload = process
+system.cpu.createThreads()
+
+# set up the root SimObject and start the simulation
+root = Root(full_system = False, system = system)
+# instantiate all of the objects we've created above
+m5.instantiate()
+
+print "Beginning simulation!"
+exit_event = m5.simulate()
+print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_event.getCause())