summaryrefslogtreecommitdiff
path: root/configs
diff options
context:
space:
mode:
Diffstat (limited to 'configs')
-rw-r--r--configs/dram/lat_mem_rd.py305
1 files changed, 305 insertions, 0 deletions
diff --git a/configs/dram/lat_mem_rd.py b/configs/dram/lat_mem_rd.py
new file mode 100644
index 000000000..87917418d
--- /dev/null
+++ b/configs/dram/lat_mem_rd.py
@@ -0,0 +1,305 @@
+# Copyright (c) 2015 ARM Limited
+# All rights reserved.
+#
+# The license below extends only to copyright in the software and shall
+# not be construed as granting a license to any other intellectual
+# property including but not limited to intellectual property relating
+# to a hardware implementation of the functionality of the software
+# licensed hereunder. You may use the software subject to the license
+# terms below provided that you ensure that this notice is replicated
+# unmodified and in its entirety in all distributions of the software,
+# modified or unmodified, in source code or in binary form.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met: redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer;
+# redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution;
+# neither the name of the copyright holders nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Authors: Andreas Hansson
+
+import gzip
+import optparse
+import os
+
+import m5
+from m5.objects import *
+from m5.util import addToPath
+from m5.internal.stats import periodicStatDump
+
+addToPath('../common')
+import MemConfig
+
+addToPath('../../util')
+import protolib
+
+# this script is helpful to observe the memory latency for various
+# levels in a cache hierarchy, and various cache and memory
+# configurations, in essence replicating the lmbench lat_mem_rd thrash
+# behaviour
+
+# import the packet proto definitions, and if they are not found,
+# attempt to generate them automatically
+try:
+ import packet_pb2
+except:
+ print "Did not find packet proto definitions, attempting to generate"
+ from subprocess import call
+ error = call(['protoc', '--python_out=configs/dram',
+ '--proto_path=src/proto', 'src/proto/packet.proto'])
+ if not error:
+ print "Generated packet proto definitions"
+
+ try:
+ import google.protobuf
+ except:
+ print "Please install the Python protobuf module"
+ exit(-1)
+
+ import packet_pb2
+ else:
+ print "Failed to import packet proto definitions"
+ exit(-1)
+
+parser = optparse.OptionParser()
+
+parser.add_option("--mem-type", type="choice", default="DDR3_1600_x64",
+ choices=MemConfig.mem_names(),
+ help = "type of memory to use")
+parser.add_option("--mem-size", action="store", type="string",
+ default="16MB",
+ help="Specify the memory size")
+parser.add_option("--reuse-trace", action="store_true",
+ help="Prevent generation of traces and reuse existing")
+
+(options, args) = parser.parse_args()
+
+if args:
+ print "Error: script doesn't take any positional arguments"
+ sys.exit(1)
+
+# start by creating the system itself, using a multi-layer 2.0 GHz
+# crossbar, delivering 64 bytes / 3 cycles (one header cycle) which
+# amounts to 42.7 GByte/s per layer and thus per port
+system = System(membus = SystemXBar(width = 32))
+system.clk_domain = SrcClockDomain(clock = '2.0GHz',
+ voltage_domain =
+ VoltageDomain(voltage = '1V'))
+
+mem_range = AddrRange(options.mem_size)
+system.mem_ranges = [mem_range]
+
+# do not worry about reserving space for the backing store
+system.mmap_using_noreserve = True
+
+# currently not exposed as command-line options, set here for now
+options.mem_channels = 1
+options.mem_ranks = 1
+options.external_memory_system = 0
+options.tlm_memory = 0
+options.elastic_trace_en = 0
+
+MemConfig.config_mem(options, system)
+
+# there is no point slowing things down by saving any data
+for ctrl in system.mem_ctrls:
+ ctrl.null = True
+
+ # the following assumes that we are using the native DRAM
+ # controller, check to be sure
+ if isinstance(ctrl, m5.objects.DRAMCtrl):
+ # make the DRAM refresh interval sufficiently infinite to avoid
+ # latency spikes
+ ctrl.tREFI = '100s'
+
+# use the same concept as the utilisation sweep, and print the config
+# so that we can later read it in
+cfg_file_name = os.path.join(m5.options.outdir, "lat_mem_rd.cfg")
+cfg_file = open(cfg_file_name, 'w')
+
+# set an appropriate burst length in bytes
+burst_size = 64
+system.cache_line_size = burst_size
+
+# lazy version to check if an integer is a power of two
+def is_pow2(num):
+ return num != 0 and ((num & (num - 1)) == 0)
+
+# assume we start every range at 0
+max_range = int(mem_range.end)
+
+# start at a size of 4 kByte, and go up till we hit the max, increase
+# the step every time we hit a power of two
+min_range = 4096
+ranges = [min_range]
+step = 1024
+
+while ranges[-1] < max_range:
+ new_range = ranges[-1] + step
+ if is_pow2(new_range):
+ step *= 2
+ ranges.append(new_range)
+
+# how many times to repeat the measurement for each data point
+iterations = 2
+
+# 150 ns in ticks, this is choosen to be high enough that transactions
+# do not pile up in the system, adjust if needed
+itt = 150 * 1000
+
+# for every data point, we create a trace containing a random address
+# sequence, so that we can play back the same sequence for warming and
+# the actual measurement
+def create_trace(filename, max_addr, burst_size, itt):
+ try:
+ proto_out = gzip.open(filename, 'wb')
+ except IOError:
+ print "Failed to open ", filename, " for writing"
+ exit(-1)
+
+ # write the magic number in 4-byte Little Endian, similar to what
+ # is done in src/proto/protoio.cc
+ proto_out.write("gem5")
+
+ # add the packet header
+ header = packet_pb2.PacketHeader()
+ header.obj_id = "lat_mem_rd for range 0:" + str(max_addr)
+ # assume the default tick rate (1 ps)
+ header.tick_freq = 1000000000000
+ protolib.encodeMessage(proto_out, header)
+
+ # create a list of every single address to touch
+ addrs = range(0, max_addr, burst_size)
+
+ import random
+ random.shuffle(addrs)
+
+ tick = 0
+
+ # create a packet we can re-use for all the addresses
+ packet = packet_pb2.Packet()
+ # ReadReq is 1 in src/mem/packet.hh Command enum
+ packet.cmd = 1
+ packet.size = int(burst_size)
+
+ for addr in addrs:
+ packet.tick = long(tick)
+ packet.addr = long(addr)
+ protolib.encodeMessage(proto_out, packet)
+ tick = tick + itt
+
+ proto_out.close()
+
+# this will take a while, so keep the user informed
+print "Generating traces, please wait..."
+
+nxt_range = 0
+nxt_state = 0
+period = long(itt * (max_range / burst_size))
+
+# now we create the states for each range
+for r in ranges:
+ filename = os.path.join(m5.options.outdir,
+ 'lat_mem_rd%d.trc.gz' % nxt_range)
+
+ if not options.reuse_trace:
+ # create the actual random trace for this range
+ create_trace(filename, r, burst_size, itt)
+
+ # the warming state
+ cfg_file.write("STATE %d %d TRACE %s 0\n" %
+ (nxt_state, period, filename))
+ nxt_state = nxt_state + 1
+
+ # the measuring states
+ for i in range(iterations):
+ cfg_file.write("STATE %d %d TRACE %s 0\n" %
+ (nxt_state, period, filename))
+ nxt_state = nxt_state + 1
+
+ nxt_range = nxt_range + 1
+
+cfg_file.write("INIT 0\n")
+
+# go through the states one by one
+for state in range(1, nxt_state):
+ cfg_file.write("TRANSITION %d %d 1\n" % (state - 1, state))
+
+cfg_file.write("TRANSITION %d %d 1\n" % (nxt_state - 1, nxt_state - 1))
+
+cfg_file.close()
+
+# create a traffic generator, and point it to the file we just created
+system.tgen = TrafficGen(config_file = cfg_file_name)
+
+# add a communication monitor
+system.monitor = CommMonitor()
+
+# connect the traffic generator to the system
+system.tgen.port = system.monitor.slave
+
+# create the actual cache hierarchy, for now just go with something
+# basic to explore some of the options
+from Caches import *
+
+# a starting point for an L3 cache
+class L3Cache(Cache):
+ assoc = 16
+ hit_latency = 40
+ response_latency = 40
+ mshrs = 32
+ tgts_per_mshr = 12
+ write_buffers = 16
+
+# note that everything is in the same clock domain, 2.0 GHz as
+# specified above
+system.l1cache = L1_DCache(size = '64kB')
+system.monitor.master = system.l1cache.cpu_side
+
+system.l2cache = L2Cache(size = '512kB', writeback_clean = True)
+system.l2cache.xbar = L2XBar()
+system.l1cache.mem_side = system.l2cache.xbar.slave
+system.l2cache.cpu_side = system.l2cache.xbar.master
+
+# make the L3 mostly exclusive, and correspondingly ensure that the L2
+# writes back also clean lines to the L3
+system.l3cache = L3Cache(size = '4MB', clusivity = 'mostly_excl')
+system.l3cache.xbar = L2XBar()
+system.l2cache.mem_side = system.l3cache.xbar.slave
+system.l3cache.cpu_side = system.l3cache.xbar.master
+system.l3cache.mem_side = system.membus.slave
+
+# connect the system port even if it is not used in this example
+system.system_port = system.membus.slave
+
+# every period, dump and reset all stats
+periodicStatDump(period)
+
+# run Forrest, run!
+root = Root(full_system = False, system = system)
+root.system.mem_mode = 'timing'
+
+m5.instantiate()
+m5.simulate(nxt_state * period)
+
+# print all we need to make sense of the stats output
+print "lat_mem_rd with %d iterations, ranges:" % iterations
+for r in ranges:
+ print r