diff options
Diffstat (limited to 'configs')
| -rw-r--r-- | configs/dram/low_power_sweep.py | 251 |
1 files changed, 251 insertions, 0 deletions
diff --git a/configs/dram/low_power_sweep.py b/configs/dram/low_power_sweep.py new file mode 100644 index 000000000..610404332 --- /dev/null +++ b/configs/dram/low_power_sweep.py @@ -0,0 +1,251 @@ +# Copyright (c) 2014-2015, 2017 ARM Limited +# All rights reserved. +# +# The license below extends only to copyright in the software and shall +# not be construed as granting a license to any other intellectual +# property including but not limited to intellectual property relating +# to a hardware implementation of the functionality of the software +# licensed hereunder. You may use the software subject to the license +# terms below provided that you ensure that this notice is replicated +# unmodified and in its entirety in all distributions of the software, +# modified or unmodified, in source code or in binary form. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer; +# redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution; +# neither the name of the copyright holders nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# Authors: Radhika Jagtap +# Andreas Hansson + +import argparse + +import m5 +from m5.objects import * +from m5.util import addToPath +from m5.stats import periodicStatDump + +addToPath('../common') +import MemConfig + +# This script aims at triggering low power state transitions in the DRAM +# controller. The traffic generator is used in DRAM mode and traffic +# states target a different levels of bank utilization and strides. +# At the end after sweeping through bank utilization and strides, we go +# through an idle state with no requests to enforce self-refresh. + +parser = argparse.ArgumentParser( + formatter_class=argparse.ArgumentDefaultsHelpFormatter) + +# Use a single-channel DDR4-2400 in 16x4 configuration by default +parser.add_argument("--mem-type", default="DDR4_2400_16x4", + choices=MemConfig.mem_names(), + help = "type of memory to use") + +parser.add_argument("--mem-ranks", "-r", type=int, default=1, + help = "Number of ranks to iterate across") + +parser.add_argument("--page-policy", "-p", + choices=["close_adaptive", "open_adaptive"], + default="close_adaptive", help="controller page policy") + +parser.add_argument("--itt-list", "-t", default="1 20 100", + help="a list of multipliers for the max value of itt, " \ + "e.g. \"1 20 100\"") + +parser.add_argument("--rd-perc", type=int, default=100, + help = "Percentage of read commands") + +parser.add_argument("--addr-map", type=int, default=1, + help = "0: RoCoRaBaCh; 1: RoRaBaCoCh/RoRaBaChCo") + +parser.add_argument("--idle-end", type=int, default=50000000, + help = "time in ps of an idle period at the end ") + +args = parser.parse_args() + +# Start with the system itself, using a multi-layer 2.0 GHz +# crossbar, delivering 64 bytes / 3 cycles (one header cycle) +# which amounts to 42.7 GByte/s per layer and thus per port. +system = System(membus = IOXBar(width = 32)) +system.clk_domain = SrcClockDomain(clock = '2.0GHz', + voltage_domain = + VoltageDomain(voltage = '1V')) + +# We are fine with 256 MB memory for now. +mem_range = AddrRange('256MB') +# Start address is 0 +system.mem_ranges = [mem_range] + +# Do not worry about reserving space for the backing store +system.mmap_using_noreserve = True + +# Force a single channel to match the assumptions in the DRAM traffic +# generator +args.mem_channels = 1 +args.external_memory_system = 0 +args.tlm_memory = 0 +args.elastic_trace_en = 0 +MemConfig.config_mem(args, system) + +# Sanity check for memory controller class. +if not isinstance(system.mem_ctrls[0], m5.objects.DRAMCtrl): + fatal("This script assumes the memory is a DRAMCtrl subclass") + +# There is no point slowing things down by saving any data. +system.mem_ctrls[0].null = True + +# Set the address mapping based on input argument +# Default to RoRaBaCoCh +if args.addr_map == 0: + system.mem_ctrls[0].addr_mapping = "RoCoRaBaCh" +elif args.addr_map == 1: + system.mem_ctrls[0].addr_mapping = "RoRaBaCoCh" +else: + fatal("Did not specify a valid address map argument") + +system.mem_ctrls[0].page_policy = args.page_policy + +# We create a traffic generator state for each param combination we want to +# test. Each traffic generator state is specified in the config file and the +# generator remains in the state for specific period. This period is 0.25 ms. +# Stats are dumped and reset at the state transition. +period = 250000000 + +# We specify the states in a config file input to the traffic generator. +cfg_file_name = "configs/dram/lowp_sweep.cfg" +cfg_file = open(cfg_file_name, 'w') + +# Get the number of banks +nbr_banks = int(system.mem_ctrls[0].banks_per_rank.value) + +# determine the burst size in bytes +burst_size = int((system.mem_ctrls[0].devices_per_rank.value * + system.mem_ctrls[0].device_bus_width.value * + system.mem_ctrls[0].burst_length.value) / 8) + +# next, get the page size in bytes (the rowbuffer size is already in bytes) +page_size = system.mem_ctrls[0].devices_per_rank.value * \ + system.mem_ctrls[0].device_rowbuffer_size.value + +# Inter-request delay should be such that we can hit as many transitions +# to/from low power states as possible to. We provide a min and max itt to the +# traffic generator and it randomises in the range. The parameter is in +# seconds and we need it in ticks (ps). +itt_min = system.mem_ctrls[0].tBURST.value * 1000000000000 + +#The itt value when set to (tRAS + tRP + tCK) covers the case where +# a read command is delayed beyond the delay from ACT to PRE_PDN entry of the +# previous command. For write command followed by precharge, this delay +# between a write and power down entry will be tRCD + tCL + tWR + tRP + tCK. +# As we use this delay as a unit and create multiples of it as bigger delays +# for the sweep, this parameter works for reads, writes and mix of them. +pd_entry_time = (system.mem_ctrls[0].tRAS.value + + system.mem_ctrls[0].tRP.value + + system.mem_ctrls[0].tCK.value) * 1000000000000 + +# We sweep itt max using the multipliers specified by the user. +itt_max_str = args.itt_list.strip().split() +itt_max_multiples = map(lambda x : int(x), itt_max_str) +if len(itt_max_multiples) == 0: + fatal("String for itt-max-list detected empty\n") + +itt_max_values = map(lambda m : pd_entry_time * m, itt_max_multiples) + +# Generate request addresses in the entire range, assume we start at 0 +max_addr = mem_range.end + +# For max stride, use min of the page size and 512 bytes as that should be +# more than enough +max_stride = min(512, page_size) +mid_stride = 4 * burst_size +stride_values = [burst_size, mid_stride, max_stride] + +# be selective about bank utilization instead of going from 1 to the number of +# banks +bank_util_values = [1, int(nbr_banks/2), nbr_banks] + +# Next we create the config file, but first a comment +cfg_file.write("""# STATE state# period mode=DRAM +# read_percent start_addr end_addr req_size min_itt max_itt data_limit +# stride_size page_size #banks #banks_util addr_map #ranks\n""") + +nxt_state = 0 +for itt_max in itt_max_values: + for bank in bank_util_values: + for stride_size in stride_values: + cfg_file.write("STATE %d %d %s %d 0 %d %d " + "%d %d %d %d %d %d %d %d %d\n" % + (nxt_state, period, "DRAM", args.rd_perc, max_addr, + burst_size, itt_min, itt_max, 0, stride_size, + page_size, nbr_banks, bank, args.addr_map, + args.mem_ranks)) + nxt_state = nxt_state + 1 + +# State for idle period +idle_period = args.idle_end +cfg_file.write("STATE %d %d IDLE\n" % (nxt_state, idle_period)) + +# Init state is state 0 +cfg_file.write("INIT 0\n") + +# Go through the states one by one +for state in range(1, nxt_state + 1): + cfg_file.write("TRANSITION %d %d 1\n" % (state - 1, state)) + +# Transition from last state to itself to not break the probability math +cfg_file.write("TRANSITION %d %d 1\n" % (nxt_state, nxt_state)) +cfg_file.close() + +# create a traffic generator, and point it to the file we just created +system.tgen = TrafficGen(config_file = cfg_file_name) + +# add a communication monitor +system.monitor = CommMonitor() + +# connect the traffic generator to the bus via a communication monitor +system.tgen.port = system.monitor.slave +system.monitor.master = system.membus.slave + +# connect the system port even if it is not used in this example +system.system_port = system.membus.slave + +# every period, dump and reset all stats +periodicStatDump(period) + +root = Root(full_system = False, system = system) +root.system.mem_mode = 'timing' + +m5.instantiate() + +# Simulate for exactly as long as it takes to go through all the states +# This is why sim exists. +m5.simulate(nxt_state * period + idle_period) +print "--- Done DRAM low power sweep ---" +print "Fixed params - " +print "\tburst: %d, banks: %d, max stride: %d, itt min: %s ns" % \ + (burst_size, nbr_banks, max_stride, itt_min) +print "Swept params - " +print "\titt max multiples input:", itt_max_multiples +print "\titt max values", itt_max_values +print "\tbank utilization values", bank_util_values +print "\tstride values:", stride_values +print "Traffic gen config file:", cfg_file_name |