diff options
Diffstat (limited to 'cpu/o3/cpu.cc')
| -rw-r--r-- | cpu/o3/cpu.cc | 566 |
1 files changed, 0 insertions, 566 deletions
diff --git a/cpu/o3/cpu.cc b/cpu/o3/cpu.cc deleted file mode 100644 index a268dbc23..000000000 --- a/cpu/o3/cpu.cc +++ /dev/null @@ -1,566 +0,0 @@ -/* - * Copyright (c) 2004-2005 The Regents of The University of Michigan - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer; - * redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution; - * neither the name of the copyright holders nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "config/full_system.hh" - -#if FULL_SYSTEM -#include "sim/system.hh" -#else -#include "sim/process.hh" -#endif -#include "sim/root.hh" - -#include "cpu/cpu_exec_context.hh" -#include "cpu/exec_context.hh" -#include "cpu/o3/alpha_dyn_inst.hh" -#include "cpu/o3/alpha_impl.hh" -#include "cpu/o3/cpu.hh" - -using namespace std; - -BaseFullCPU::BaseFullCPU(Params ¶ms) - : BaseCPU(¶ms), cpu_id(0) -{ -} - -template <class Impl> -FullO3CPU<Impl>::TickEvent::TickEvent(FullO3CPU<Impl> *c) - : Event(&mainEventQueue, CPU_Tick_Pri), cpu(c) -{ -} - -template <class Impl> -void -FullO3CPU<Impl>::TickEvent::process() -{ - cpu->tick(); -} - -template <class Impl> -const char * -FullO3CPU<Impl>::TickEvent::description() -{ - return "FullO3CPU tick event"; -} - -//Call constructor to all the pipeline stages here -template <class Impl> -FullO3CPU<Impl>::FullO3CPU(Params ¶ms) -#if FULL_SYSTEM - : BaseFullCPU(params), -#else - : BaseFullCPU(params), -#endif // FULL_SYSTEM - tickEvent(this), - fetch(params), - decode(params), - rename(params), - iew(params), - commit(params), - - regFile(params.numPhysIntRegs, params.numPhysFloatRegs), - - freeList(TheISA::NumIntRegs, params.numPhysIntRegs, - TheISA::NumFloatRegs, params.numPhysFloatRegs), - - renameMap(TheISA::NumIntRegs, params.numPhysIntRegs, - TheISA::NumFloatRegs, params.numPhysFloatRegs, - TheISA::NumMiscRegs, - TheISA::ZeroReg, - TheISA::ZeroReg + TheISA::NumIntRegs), - - rob(params.numROBEntries, params.squashWidth), - - // What to pass to these time buffers? - // For now just have these time buffers be pretty big. - timeBuffer(5, 5), - fetchQueue(5, 5), - decodeQueue(5, 5), - renameQueue(5, 5), - iewQueue(5, 5), - - cpuXC(NULL), - - globalSeqNum(1), - -#if FULL_SYSTEM - system(params.system), - memCtrl(system->memctrl), - physmem(system->physmem), - itb(params.itb), - dtb(params.dtb), - mem(params.mem), -#else - // Hardcoded for a single thread!! - mem(params.workload[0]->getMemory()), -#endif // FULL_SYSTEM - - icacheInterface(params.icacheInterface), - dcacheInterface(params.dcacheInterface), - deferRegistration(params.defReg), - numInsts(0), - funcExeInst(0) -{ - _status = Idle; - -#if !FULL_SYSTEM - thread.resize(this->number_of_threads); -#endif - - for (int i = 0; i < this->number_of_threads; ++i) { -#if FULL_SYSTEM - assert(i == 0); - thread[i] = new CPUExecContext(this, 0, system, itb, dtb, mem); - system->execContexts[i] = thread[i]->getProxy(); - - execContexts.push_back(system->execContexts[i]); -#else - if (i < params.workload.size()) { - DPRINTF(FullCPU, "FullCPU: Workload[%i]'s starting PC is %#x, " - "process is %#x", - i, params.workload[i]->prog_entry, thread[i]); - thread[i] = new CPUExecContext(this, i, params.workload[i], i); - } - assert(params.workload[i]->getMemory() != NULL); - assert(mem != NULL); - execContexts.push_back(thread[i]->getProxy()); -#endif // !FULL_SYSTEM - } - - // Note that this is a hack so that my code which still uses xc-> will - // still work. I should remove this eventually - cpuXC = thread[0]; - - // The stages also need their CPU pointer setup. However this must be - // done at the upper level CPU because they have pointers to the upper - // level CPU, and not this FullO3CPU. - - // Give each of the stages the time buffer they will use. - fetch.setTimeBuffer(&timeBuffer); - decode.setTimeBuffer(&timeBuffer); - rename.setTimeBuffer(&timeBuffer); - iew.setTimeBuffer(&timeBuffer); - commit.setTimeBuffer(&timeBuffer); - - // Also setup each of the stages' queues. - fetch.setFetchQueue(&fetchQueue); - decode.setFetchQueue(&fetchQueue); - decode.setDecodeQueue(&decodeQueue); - rename.setDecodeQueue(&decodeQueue); - rename.setRenameQueue(&renameQueue); - iew.setRenameQueue(&renameQueue); - iew.setIEWQueue(&iewQueue); - commit.setIEWQueue(&iewQueue); - commit.setRenameQueue(&renameQueue); - - // Setup the rename map for whichever stages need it. - rename.setRenameMap(&renameMap); - iew.setRenameMap(&renameMap); - - // Setup the free list for whichever stages need it. - rename.setFreeList(&freeList); - renameMap.setFreeList(&freeList); - - // Setup the ROB for whichever stages need it. - commit.setROB(&rob); -} - -template <class Impl> -FullO3CPU<Impl>::~FullO3CPU() -{ -} - -template <class Impl> -void -FullO3CPU<Impl>::fullCPURegStats() -{ - // Register any of the FullCPU's stats here. -} - -template <class Impl> -void -FullO3CPU<Impl>::tick() -{ - DPRINTF(FullCPU, "\n\nFullCPU: Ticking main, FullO3CPU.\n"); - - //Tick each of the stages if they're actually running. - //Will want to figure out a way to unschedule itself if they're all - //going to be idle for a long time. - fetch.tick(); - - decode.tick(); - - rename.tick(); - - iew.tick(); - - commit.tick(); - - // Now advance the time buffers, unless the stage is stalled. - timeBuffer.advance(); - - fetchQueue.advance(); - decodeQueue.advance(); - renameQueue.advance(); - iewQueue.advance(); - - if (_status == Running && !tickEvent.scheduled()) - tickEvent.schedule(curTick + 1); -} - -template <class Impl> -void -FullO3CPU<Impl>::init() -{ - if(!deferRegistration) - { - this->registerExecContexts(); - - // Need to do a copy of the xc->regs into the CPU's regfile so - // that it can start properly. -#if FULL_SYSTEM - ExecContext *src_xc = system->execContexts[0]; - TheISA::initCPU(src_xc, src_xc->readCpuId()); -#else - ExecContext *src_xc = thread[0]->getProxy(); -#endif - // First loop through the integer registers. - for (int i = 0; i < TheISA::NumIntRegs; ++i) - { - regFile.intRegFile[i] = src_xc->readIntReg(i); - } - - // Then loop through the floating point registers. - for (int i = 0; i < TheISA::NumFloatRegs; ++i) - { - regFile.floatRegFile.setRegBits(i, src_xc->readRegBits(i)) - } -/* - // Then loop through the misc registers. - regFile.miscRegs.fpcr = src_xc->regs.miscRegs.fpcr; - regFile.miscRegs.uniq = src_xc->regs.miscRegs.uniq; - regFile.miscRegs.lock_flag = src_xc->regs.miscRegs.lock_flag; - regFile.miscRegs.lock_addr = src_xc->regs.miscRegs.lock_addr; -*/ - // Then finally set the PC and the next PC. - regFile.pc = src_xc->readPC(); - regFile.npc = src_xc->readNextPC(); - } -} - -template <class Impl> -void -FullO3CPU<Impl>::activateContext(int thread_num, int delay) -{ - // Needs to set each stage to running as well. - - scheduleTickEvent(delay); - - _status = Running; -} - -template <class Impl> -void -FullO3CPU<Impl>::suspendContext(int thread_num) -{ - panic("suspendContext unimplemented!"); -} - -template <class Impl> -void -FullO3CPU<Impl>::deallocateContext(int thread_num) -{ - panic("deallocateContext unimplemented!"); -} - -template <class Impl> -void -FullO3CPU<Impl>::haltContext(int thread_num) -{ - panic("haltContext unimplemented!"); -} - -template <class Impl> -void -FullO3CPU<Impl>::switchOut() -{ - panic("FullO3CPU does not have a switch out function.\n"); -} - -template <class Impl> -void -FullO3CPU<Impl>::takeOverFrom(BaseCPU *oldCPU) -{ - BaseCPU::takeOverFrom(oldCPU); - - assert(!tickEvent.scheduled()); - - // Set all status's to active, schedule the - // CPU's tick event. - for (int i = 0; i < execContexts.size(); ++i) { - ExecContext *xc = execContexts[i]; - if (xc->status() == ExecContext::Active && _status != Running) { - _status = Running; - tickEvent.schedule(curTick); - } - } -} - -template <class Impl> -InstSeqNum -FullO3CPU<Impl>::getAndIncrementInstSeq() -{ - // Hopefully this works right. - return globalSeqNum++; -} - -template <class Impl> -uint64_t -FullO3CPU<Impl>::readIntReg(int reg_idx) -{ - return regFile.readIntReg(reg_idx); -} - -template <class Impl> -FloatReg -FullO3CPU<Impl>::readFloatReg(int reg_idx, int width) -{ - return regFile.readFloatReg(reg_idx, width); -} - -template <class Impl> -FloatReg -FullO3CPU<Impl>::readFloatReg(int reg_idx) -{ - return regFile.readFloatReg(reg_idx); -} - -template <class Impl> -FloatRegBits -FullO3CPU<Impl>::readFloatRegBits(int reg_idx, int width) -{ - return regFile.readFloatRegBits(reg_idx, width); -} - -template <class Impl> -FloatRegBits -FullO3CPU<Impl>::readFloatRegBits(int reg_idx) -{ - return regFile.readFloatRegBits(reg_idx); -} - -template <class Impl> -void -FullO3CPU<Impl>::setIntReg(int reg_idx, uint64_t val) -{ - regFile.setIntReg(reg_idx, val); -} - -template <class Impl> -void -FullO3CPU<Impl>::setFloatReg(int reg_idx, FloatReg val, int width) -{ - regFile.setFloatReg(reg_idx, val, width); -} - -template <class Impl> -void -FullO3CPU<Impl>::setFloatReg(int reg_idx, FloatReg val) -{ - regFile.setFloatReg(reg_idx, val); -} - -template <class Impl> -void -FullO3CPU<Impl>::setFloatRegBits(int reg_idx, FloatRegBits val, int width) -{ - regFile.setFloatRegBits(reg_idx, val, width); -} - -template <class Impl> -void -FullO3CPU<Impl>::setFloatRegBits(int reg_idx, FloatRegBits val) -{ - regFile.setFloatRegBits(reg_idx, val); -} - -template <class Impl> -uint64_t -FullO3CPU<Impl>::readPC() -{ - return regFile.readPC(); -} - -template <class Impl> -void -FullO3CPU<Impl>::setNextPC(uint64_t val) -{ - regFile.setNextPC(val); -} - -template <class Impl> -void -FullO3CPU<Impl>::setPC(Addr new_PC) -{ - regFile.setPC(new_PC); -} - -template <class Impl> -void -FullO3CPU<Impl>::addInst(DynInstPtr &inst) -{ - instList.push_back(inst); -} - -template <class Impl> -void -FullO3CPU<Impl>::instDone() -{ - // Keep an instruction count. - numInsts++; - - // Check for instruction-count-based events. - comInstEventQueue[0]->serviceEvents(numInsts); -} - -template <class Impl> -void -FullO3CPU<Impl>::removeBackInst(DynInstPtr &inst) -{ - DynInstPtr inst_to_delete; - - // Walk through the instruction list, removing any instructions - // that were inserted after the given instruction, inst. - while (instList.back() != inst) - { - assert(!instList.empty()); - - // Obtain the pointer to the instruction. - inst_to_delete = instList.back(); - - DPRINTF(FullCPU, "FullCPU: Removing instruction %i, PC %#x\n", - inst_to_delete->seqNum, inst_to_delete->readPC()); - - // Remove the instruction from the list. - instList.pop_back(); - - // Mark it as squashed. - inst_to_delete->setSquashed(); - } -} - -template <class Impl> -void -FullO3CPU<Impl>::removeFrontInst(DynInstPtr &inst) -{ - DynInstPtr inst_to_remove; - - // The front instruction should be the same one being asked to be removed. - assert(instList.front() == inst); - - // Remove the front instruction. - inst_to_remove = inst; - instList.pop_front(); - - DPRINTF(FullCPU, "FullCPU: Removing committed instruction %#x, PC %#x\n", - inst_to_remove, inst_to_remove->readPC()); -} - -template <class Impl> -void -FullO3CPU<Impl>::removeInstsNotInROB() -{ - DPRINTF(FullCPU, "FullCPU: Deleting instructions from instruction " - "list.\n"); - - DynInstPtr rob_tail = rob.readTailInst(); - - removeBackInst(rob_tail); -} - -template <class Impl> -void -FullO3CPU<Impl>::removeInstsUntil(const InstSeqNum &seq_num) -{ - DPRINTF(FullCPU, "FullCPU: Deleting instructions from instruction " - "list.\n"); - - DynInstPtr inst_to_delete; - - while (instList.back()->seqNum > seq_num) { - assert(!instList.empty()); - - // Obtain the pointer to the instruction. - inst_to_delete = instList.back(); - - DPRINTF(FullCPU, "FullCPU: Removing instruction %i, PC %#x\n", - inst_to_delete->seqNum, inst_to_delete->readPC()); - - // Remove the instruction from the list. - instList.back() = NULL; - instList.pop_back(); - - // Mark it as squashed. - inst_to_delete->setSquashed(); - } - -} - -template <class Impl> -void -FullO3CPU<Impl>::removeAllInsts() -{ - instList.clear(); -} - -template <class Impl> -void -FullO3CPU<Impl>::dumpInsts() -{ - int num = 0; - typename list<DynInstPtr>::iterator inst_list_it = instList.begin(); - - while (inst_list_it != instList.end()) - { - cprintf("Instruction:%i\nPC:%#x\nSN:%lli\nIssued:%i\nSquashed:%i\n\n", - num, (*inst_list_it)->readPC(), (*inst_list_it)->seqNum, - (*inst_list_it)->isIssued(), (*inst_list_it)->isSquashed()); - inst_list_it++; - ++num; - } -} - -template <class Impl> -void -FullO3CPU<Impl>::wakeDependents(DynInstPtr &inst) -{ - iew.wakeDependents(inst); -} - -// Forward declaration of FullO3CPU. -template class FullO3CPU<AlphaSimpleImpl>; |