summaryrefslogtreecommitdiff
path: root/dev/ide_ctrl.cc
diff options
context:
space:
mode:
Diffstat (limited to 'dev/ide_ctrl.cc')
-rw-r--r--dev/ide_ctrl.cc371
1 files changed, 199 insertions, 172 deletions
diff --git a/dev/ide_ctrl.cc b/dev/ide_ctrl.cc
index 785f18ae8..6ad80e69d 100644
--- a/dev/ide_ctrl.cc
+++ b/dev/ide_ctrl.cc
@@ -75,13 +75,15 @@ IdeController::IdeController(Params *p)
bmi_size = BARSize[4];
// zero out all of the registers
- memset(bmi_regs, 0, sizeof(bmi_regs));
- memset(pci_regs, 0, sizeof(pci_regs));
+ memset(bmi_regs.data, 0, sizeof(bmi_regs));
+ memset(config_regs.data, 0, sizeof(config_regs.data));
// setup initial values
- *(uint32_t *)&pci_regs[IDETIM] = 0x80008000; // enable both channels
- *(uint8_t *)&bmi_regs[BMIS0] = 0x60;
- *(uint8_t *)&bmi_regs[BMIS1] = 0x60;
+ // enable both channels
+ config_regs.idetim0 = htole((uint16_t)IDETIM_DECODE_EN);
+ config_regs.idetim1 = htole((uint16_t)IDETIM_DECODE_EN);
+ bmi_regs.bmis0 = DMA1CAP | DMA0CAP;
+ bmi_regs.bmis1 = DMA1CAP | DMA0CAP;
// reset all internal variables
io_enabled = false;
@@ -127,46 +129,46 @@ IdeController::~IdeController()
///
void
-IdeController::parseAddr(const Addr &addr, Addr &offset, bool &primary,
- RegType_t &type)
+IdeController::parseAddr(const Addr &addr, Addr &offset, IdeChannel &channel,
+ IdeRegType &reg_type)
{
offset = addr;
if (addr >= pri_cmd_addr && addr < (pri_cmd_addr + pri_cmd_size)) {
offset -= pri_cmd_addr;
- type = COMMAND_BLOCK;
- primary = true;
+ reg_type = COMMAND_BLOCK;
+ channel = PRIMARY;
} else if (addr >= pri_ctrl_addr &&
addr < (pri_ctrl_addr + pri_ctrl_size)) {
offset -= pri_ctrl_addr;
- type = CONTROL_BLOCK;
- primary = true;
+ reg_type = CONTROL_BLOCK;
+ channel = PRIMARY;
} else if (addr >= sec_cmd_addr &&
addr < (sec_cmd_addr + sec_cmd_size)) {
offset -= sec_cmd_addr;
- type = COMMAND_BLOCK;
- primary = false;
+ reg_type = COMMAND_BLOCK;
+ channel = SECONDARY;
} else if (addr >= sec_ctrl_addr &&
addr < (sec_ctrl_addr + sec_ctrl_size)) {
offset -= sec_ctrl_addr;
- type = CONTROL_BLOCK;
- primary = false;
+ reg_type = CONTROL_BLOCK;
+ channel = SECONDARY;
} else if (addr >= bmi_addr && addr < (bmi_addr + bmi_size)) {
offset -= bmi_addr;
- type = BMI_BLOCK;
- primary = (offset < BMIC1) ? true : false;
+ reg_type = BMI_BLOCK;
+ channel = (offset < BMIC1) ? PRIMARY : SECONDARY;
} else {
panic("IDE controller access to invalid address: %#x\n", addr);
}
}
int
-IdeController::getDisk(bool primary)
+IdeController::getDisk(IdeChannel channel)
{
int disk = 0;
uint8_t *devBit = &dev[0];
- if (!primary) {
+ if (channel == SECONDARY) {
disk += 2;
devBit = &dev[1];
}
@@ -218,18 +220,18 @@ IdeController::setDmaComplete(IdeDisk *disk)
if (diskNum < 2) {
// clear the start/stop bit in the command register
- bmi_regs[BMIC0] &= ~SSBM;
+ bmi_regs.bmic0 &= ~SSBM;
// clear the bus master active bit in the status register
- bmi_regs[BMIS0] &= ~BMIDEA;
+ bmi_regs.bmis0 &= ~BMIDEA;
// set the interrupt bit
- bmi_regs[BMIS0] |= IDEINTS;
+ bmi_regs.bmis0 |= IDEINTS;
} else {
// clear the start/stop bit in the command register
- bmi_regs[BMIC1] &= ~SSBM;
+ bmi_regs.bmic1 &= ~SSBM;
// clear the bus master active bit in the status register
- bmi_regs[BMIS1] &= ~BMIDEA;
+ bmi_regs.bmis1 &= ~BMIDEA;
// set the interrupt bit
- bmi_regs[BMIS1] |= IDEINTS;
+ bmi_regs.bmis1 |= IDEINTS;
}
}
@@ -249,105 +251,79 @@ IdeController::cacheAccess(MemReqPtr &req)
////
void
-IdeController::ReadConfig(int offset, int size, uint8_t *data)
+IdeController::readConfig(int offset, int size, uint8_t *data)
{
-
-#if TRACING_ON
- Addr origOffset = offset;
-#endif
+ int config_offset;
if (offset < PCI_DEVICE_SPECIFIC) {
- PciDev::ReadConfig(offset, size, data);
- } else {
- if (offset >= PCI_IDE_TIMING && offset < (PCI_IDE_TIMING + 4)) {
- offset -= PCI_IDE_TIMING;
- offset += IDETIM;
-
- if ((offset + size) > (IDETIM + 4))
- panic("PCI read of IDETIM with invalid size\n");
- } else if (offset == PCI_SLAVE_TIMING) {
- offset -= PCI_SLAVE_TIMING;
- offset += SIDETIM;
-
- if ((offset + size) > (SIDETIM + 1))
- panic("PCI read of SIDETIM with invalid size\n");
- } else if (offset == PCI_UDMA33_CTRL) {
- offset -= PCI_UDMA33_CTRL;
- offset += UDMACTL;
-
- if ((offset + size) > (UDMACTL + 1))
- panic("PCI read of UDMACTL with invalid size\n");
- } else if (offset >= PCI_UDMA33_TIMING &&
- offset < (PCI_UDMA33_TIMING + 2)) {
- offset -= PCI_UDMA33_TIMING;
- offset += UDMATIM;
-
- if ((offset + size) > (UDMATIM + 2))
- panic("PCI read of UDMATIM with invalid size\n");
- } else {
- panic("PCI read of unimplemented register: %x\n", offset);
+ PciDev::readConfig(offset, size, data);
+ } else if (offset >= IDE_CTRL_CONF_START &&
+ (offset + size) <= IDE_CTRL_CONF_END) {
+
+ config_offset = offset - IDE_CTRL_CONF_START;
+
+ switch (size) {
+ case sizeof(uint8_t):
+ *data = config_regs.data[config_offset];
+ break;
+ case sizeof(uint16_t):
+ *(uint16_t*)data = *(uint16_t*)&config_regs.data[config_offset];
+ break;
+ case sizeof(uint32_t):
+ *(uint32_t*)data = *(uint32_t*)&config_regs.data[config_offset];
+ break;
+ default:
+ panic("Invalid PCI configuration read size!\n");
}
- memcpy((void *)data, (void *)&pci_regs[offset], size);
- }
+ DPRINTF(IdeCtrl, "PCI read offset: %#x size: %#x data: %#x\n",
+ offset, size, *(uint32_t*)data);
- DPRINTF(IdeCtrl, "PCI read offset: %#x (%#x) size: %#x data: %#x\n",
- origOffset, offset, size,
- (*(uint32_t *)data) & (0xffffffff >> 8 * (4 - size)));
+ } else {
+ panic("Read of unimplemented PCI config. register: %x\n", offset);
+ }
}
void
-IdeController::WriteConfig(int offset, int size, uint32_t data)
+IdeController::writeConfig(int offset, int size, const uint8_t *data)
{
- DPRINTF(IdeCtrl, "PCI write offset: %#x size: %#x data: %#x\n",
- offset, size, data & (0xffffffff >> 8 * (4 - size)));
+ int config_offset;
- // do standard write stuff if in standard PCI space
if (offset < PCI_DEVICE_SPECIFIC) {
- PciDev::WriteConfig(offset, size, data);
- } else {
- if (offset >= PCI_IDE_TIMING && offset < (PCI_IDE_TIMING + 4)) {
- offset -= PCI_IDE_TIMING;
- offset += IDETIM;
-
- if ((offset + size) > (IDETIM + 4))
- panic("PCI write to IDETIM with invalid size\n");
- } else if (offset == PCI_SLAVE_TIMING) {
- offset -= PCI_SLAVE_TIMING;
- offset += SIDETIM;
-
- if ((offset + size) > (SIDETIM + 1))
- panic("PCI write to SIDETIM with invalid size\n");
- } else if (offset == PCI_UDMA33_CTRL) {
- offset -= PCI_UDMA33_CTRL;
- offset += UDMACTL;
-
- if ((offset + size) > (UDMACTL + 1))
- panic("PCI write to UDMACTL with invalid size\n");
- } else if (offset >= PCI_UDMA33_TIMING &&
- offset < (PCI_UDMA33_TIMING + 2)) {
- offset -= PCI_UDMA33_TIMING;
- offset += UDMATIM;
-
- if ((offset + size) > (UDMATIM + 2))
- panic("PCI write to UDMATIM with invalid size\n");
- } else {
- panic("PCI write to unimplemented register: %x\n", offset);
+ PciDev::writeConfig(offset, size, data);
+ } else if (offset >= IDE_CTRL_CONF_START &&
+ (offset + size) <= IDE_CTRL_CONF_END) {
+
+ config_offset = offset - IDE_CTRL_CONF_START;
+
+ switch(size) {
+ case sizeof(uint8_t):
+ config_regs.data[config_offset] = *data;
+ case sizeof(uint16_t):
+ *(uint16_t*)&config_regs.data[config_offset] = *(uint16_t*)data;
+ case sizeof(uint32_t):
+ *(uint32_t*)&config_regs.data[config_offset] = *(uint32_t*)data;
+ break;
+ default:
+ panic("Invalid PCI configuration write size!\n");
}
-
- memcpy((void *)&pci_regs[offset], (void *)&data, size);
+ } else {
+ panic("Write of unimplemented PCI config. register: %x\n", offset);
}
+ DPRINTF(IdeCtrl, "PCI write offset: %#x size: %#x data: %#x\n",
+ offset, size, data);
+
// Catch the writes to specific PCI registers that have side affects
// (like updating the PIO ranges)
switch (offset) {
case PCI_COMMAND:
- if (config.data[offset] & PCI_CMD_IOSE)
+ if (letoh(config.command) & PCI_CMD_IOSE)
io_enabled = true;
else
io_enabled = false;
- if (config.data[offset] & PCI_CMD_BME)
+ if (letoh(config.command) & PCI_CMD_BME)
bm_enabled = true;
else
bm_enabled = false;
@@ -413,37 +389,68 @@ Fault
IdeController::read(MemReqPtr &req, uint8_t *data)
{
Addr offset;
- bool primary;
- bool byte;
- bool cmdBlk;
- RegType_t type;
+ IdeChannel channel;
+ IdeRegType reg_type;
int disk;
- parseAddr(req->paddr, offset, primary, type);
- byte = (req->size == sizeof(uint8_t)) ? true : false;
- cmdBlk = (type == COMMAND_BLOCK) ? true : false;
+ parseAddr(req->paddr, offset, channel, reg_type);
if (!io_enabled)
return No_Fault;
- // sanity check the size (allows byte, word, or dword access)
- if (req->size != sizeof(uint8_t) && req->size != sizeof(uint16_t) &&
- req->size != sizeof(uint32_t))
- panic("IDE controller read of invalid size: %#x\n", req->size);
+ switch (reg_type) {
+ case BMI_BLOCK:
+ switch (req->size) {
+ case sizeof(uint8_t):
+ *data = bmi_regs.data[offset];
+ break;
+ case sizeof(uint16_t):
+ *(uint16_t*)data = *(uint16_t*)&bmi_regs.data[offset];
+ break;
+ case sizeof(uint32_t):
+ *(uint32_t*)data = *(uint32_t*)&bmi_regs.data[offset];
+ break;
+ default:
+ panic("IDE read of BMI reg invalid size: %#x\n", req->size);
+ }
+ break;
+
+ case COMMAND_BLOCK:
+ case CONTROL_BLOCK:
+ disk = getDisk(channel);
- if (type != BMI_BLOCK) {
- assert(req->size != sizeof(uint32_t));
+ if (disks[disk] == NULL)
+ break;
- disk = getDisk(primary);
- if (disks[disk])
- disks[disk]->read(offset, byte, cmdBlk, data);
- } else {
- memcpy((void *)data, &bmi_regs[offset], req->size);
+ switch (offset) {
+ case DATA_OFFSET:
+ switch (req->size) {
+ case sizeof(uint16_t):
+ disks[disk]->read(offset, reg_type, data);
+ break;
+
+ case sizeof(uint32_t):
+ disks[disk]->read(offset, reg_type, data);
+ disks[disk]->read(offset, reg_type, &data[2]);
+ break;
+
+ default:
+ panic("IDE read of data reg invalid size: %#x\n", req->size);
+ }
+ break;
+ default:
+ if (req->size == sizeof(uint8_t)) {
+ disks[disk]->read(offset, reg_type, data);
+ } else
+ panic("IDE read of command reg of invalid size: %#x\n", req->size);
+ }
+ break;
+ default:
+ panic("IDE controller read of unknown register block type!\n");
}
DPRINTF(IdeCtrl, "read from offset: %#x size: %#x data: %#x\n",
- offset, req->size,
- (*(uint32_t *)data) & (0xffffffff >> 8 * (4 - req->size)));
+ offset, req->size, *(uint32_t*)data);
return No_Fault;
}
@@ -452,41 +459,21 @@ Fault
IdeController::write(MemReqPtr &req, const uint8_t *data)
{
Addr offset;
- bool primary;
- bool byte;
- bool cmdBlk;
- RegType_t type;
+ IdeChannel channel;
+ IdeRegType reg_type;
int disk;
-
- parseAddr(req->paddr, offset, primary, type);
- byte = (req->size == sizeof(uint8_t)) ? true : false;
- cmdBlk = (type == COMMAND_BLOCK) ? true : false;
-
- DPRINTF(IdeCtrl, "write from offset: %#x size: %#x data: %#x\n",
- offset, req->size,
- (*(uint32_t *)data) & (0xffffffff >> 8 * (4 - req->size)));
-
uint8_t oldVal, newVal;
- if (!io_enabled)
- return No_Fault;
+ parseAddr(req->paddr, offset, channel, reg_type);
- if (type == BMI_BLOCK && !bm_enabled)
+ if (!io_enabled)
return No_Fault;
- if (type != BMI_BLOCK) {
- // shadow the dev bit
- if (type == COMMAND_BLOCK && offset == IDE_SELECT_OFFSET) {
- uint8_t *devBit = (primary ? &dev[0] : &dev[1]);
- *devBit = ((*data & IDE_SELECT_DEV_BIT) ? 1 : 0);
- }
-
- assert(req->size != sizeof(uint32_t));
+ switch (reg_type) {
+ case BMI_BLOCK:
+ if (!bm_enabled)
+ return No_Fault;
- disk = getDisk(primary);
- if (disks[disk])
- disks[disk]->write(offset, byte, cmdBlk, data);
- } else {
switch (offset) {
// Bus master IDE command register
case BMIC1:
@@ -495,10 +482,10 @@ IdeController::write(MemReqPtr &req, const uint8_t *data)
panic("Invalid BMIC write size: %x\n", req->size);
// select the current disk based on DEV bit
- disk = getDisk(primary);
+ disk = getDisk(channel);
- oldVal = bmi_regs[offset];
- newVal = *data;
+ oldVal = letoh(bmi_regs.chan[channel].bmic);
+ newVal = letoh(*data);
// if a DMA transfer is in progress, R/W control cannot change
if (oldVal & SSBM) {
@@ -514,7 +501,8 @@ IdeController::write(MemReqPtr &req, const uint8_t *data)
DPRINTF(IdeCtrl, "Stopping DMA transfer\n");
// clear the BMIDEA bit
- bmi_regs[offset + 0x2] &= ~BMIDEA;
+ bmi_regs.chan[channel].bmis = letoh(
+ letoh(bmi_regs.chan[channel].bmis) & ~BMIDEA);
if (disks[disk] == NULL)
panic("DMA stop for disk %d which does not exist\n",
@@ -527,22 +515,20 @@ IdeController::write(MemReqPtr &req, const uint8_t *data)
DPRINTF(IdeCtrl, "Starting DMA transfer\n");
// set the BMIDEA bit
- bmi_regs[offset + 0x2] |= BMIDEA;
+ bmi_regs.chan[channel].bmis = letoh(
+ letoh(bmi_regs.chan[channel].bmis) | BMIDEA);
if (disks[disk] == NULL)
panic("DMA start for disk %d which does not exist\n",
disk);
// inform the disk of the DMA transfer start
- if (primary)
- disks[disk]->startDma(*(uint32_t *)&bmi_regs[BMIDTP0]);
- else
- disks[disk]->startDma(*(uint32_t *)&bmi_regs[BMIDTP1]);
+ disks[disk]->startDma(letoh(bmi_regs.chan[channel].bmidtp));
}
}
// update the register value
- bmi_regs[offset] = newVal;
+ bmi_regs.chan[channel].bmic = letoh(newVal);
break;
// Bus master IDE status register
@@ -551,8 +537,8 @@ IdeController::write(MemReqPtr &req, const uint8_t *data)
if (req->size != sizeof(uint8_t))
panic("Invalid BMIS write size: %x\n", req->size);
- oldVal = bmi_regs[offset];
- newVal = *data;
+ oldVal = letoh(bmi_regs.chan[channel].bmis);
+ newVal = letoh(*data);
// the BMIDEA bit is RO
newVal |= (oldVal & BMIDEA);
@@ -568,7 +554,7 @@ IdeController::write(MemReqPtr &req, const uint8_t *data)
else
(oldVal & IDEDMAE) ? newVal |= IDEDMAE : newVal &= ~IDEDMAE;
- bmi_regs[offset] = newVal;
+ bmi_regs.chan[channel].bmis = letoh(newVal);
break;
// Bus master IDE descriptor table pointer register
@@ -577,7 +563,8 @@ IdeController::write(MemReqPtr &req, const uint8_t *data)
if (req->size != sizeof(uint32_t))
panic("Invalid BMIDTP write size: %x\n", req->size);
- *(uint32_t *)&bmi_regs[offset] = *(uint32_t *)data & ~0x3;
+ bmi_regs.chan[channel].bmidtp = letoh(
+ letoh(*(uint32_t*)data) & ~0x3);
break;
default:
@@ -588,10 +575,50 @@ IdeController::write(MemReqPtr &req, const uint8_t *data)
req->size);
// do a default copy of data into the registers
- memcpy((void *)&bmi_regs[offset], data, req->size);
+ memcpy(&bmi_regs.data[offset], data, req->size);
+ }
+ break;
+ case COMMAND_BLOCK:
+ if (offset == IDE_SELECT_OFFSET) {
+ uint8_t *devBit = &dev[channel];
+ *devBit = (letoh(*data) & IDE_SELECT_DEV_BIT) ? 1 : 0;
}
+ // fall-through ok!
+ case CONTROL_BLOCK:
+ disk = getDisk(channel);
+
+ if (disks[disk] == NULL)
+ break;
+
+ switch (offset) {
+ case DATA_OFFSET:
+ switch (req->size) {
+ case sizeof(uint16_t):
+ disks[disk]->write(offset, reg_type, data);
+ break;
+
+ case sizeof(uint32_t):
+ disks[disk]->write(offset, reg_type, data);
+ disks[disk]->write(offset, reg_type, &data[2]);
+ break;
+ default:
+ panic("IDE write of data reg invalid size: %#x\n", req->size);
+ }
+ break;
+ default:
+ if (req->size == sizeof(uint8_t)) {
+ disks[disk]->write(offset, reg_type, data);
+ } else
+ panic("IDE write of command reg of invalid size: %#x\n", req->size);
+ }
+ break;
+ default:
+ panic("IDE controller write of unknown register block type!\n");
}
+ DPRINTF(IdeCtrl, "write to offset: %#x size: %#x data: %#x\n",
+ offset, req->size, *(uint32_t*)data);
+
return No_Fault;
}
@@ -618,14 +645,14 @@ IdeController::serialize(std::ostream &os)
SERIALIZE_SCALAR(bmi_size);
// Serialize registers
- SERIALIZE_ARRAY(bmi_regs, 16);
- SERIALIZE_ARRAY(dev, 2);
- SERIALIZE_ARRAY(pci_regs, 8);
+ SERIALIZE_ARRAY(bmi_regs.data, sizeof(bmi_regs));
+ SERIALIZE_ARRAY(dev, sizeof(dev));
+ SERIALIZE_ARRAY(config_regs.data, sizeof(config_regs));
// Serialize internal state
SERIALIZE_SCALAR(io_enabled);
SERIALIZE_SCALAR(bm_enabled);
- SERIALIZE_ARRAY(cmd_in_progress, 4);
+ SERIALIZE_ARRAY(cmd_in_progress, sizeof(cmd_in_progress));
}
void
@@ -647,14 +674,14 @@ IdeController::unserialize(Checkpoint *cp, const std::string &section)
UNSERIALIZE_SCALAR(bmi_size);
// Unserialize registers
- UNSERIALIZE_ARRAY(bmi_regs, 16);
- UNSERIALIZE_ARRAY(dev, 2);
- UNSERIALIZE_ARRAY(pci_regs, 8);
+ UNSERIALIZE_ARRAY(bmi_regs.data, sizeof(bmi_regs));
+ UNSERIALIZE_ARRAY(dev, sizeof(dev));
+ UNSERIALIZE_ARRAY(config_regs.data, sizeof(config_regs));
// Unserialize internal state
UNSERIALIZE_SCALAR(io_enabled);
UNSERIALIZE_SCALAR(bm_enabled);
- UNSERIALIZE_ARRAY(cmd_in_progress, 4);
+ UNSERIALIZE_ARRAY(cmd_in_progress, sizeof(cmd_in_progress));
if (pioInterface) {
pioInterface->addAddrRange(RangeSize(pri_cmd_addr, pri_cmd_size));