summaryrefslogtreecommitdiff
path: root/dev/sinic.cc
diff options
context:
space:
mode:
Diffstat (limited to 'dev/sinic.cc')
-rw-r--r--dev/sinic.cc332
1 files changed, 203 insertions, 129 deletions
diff --git a/dev/sinic.cc b/dev/sinic.cc
index e3e1ffba0..1a1456e5f 100644
--- a/dev/sinic.cc
+++ b/dev/sinic.cc
@@ -316,9 +316,26 @@ Device::writeConfig(int offset, int size, const uint8_t *data)
}
}
+void
+Device::prepareRead()
+{
+ using namespace Regs;
+
+ // update rx registers
+ regs.RxDone = set_RxDone_Packets(regs.RxDone, rxFifo.packets());
+ regs.RxWait = regs.RxDone;
+
+ // update tx regsiters
+ regs.TxDone = set_TxDone_Packets(regs.TxDone, txFifo.packets());
+ regs.TxDone = set_TxDone_Full(regs.TxDone,
+ txFifo.avail() < regs.TxMaxCopy);
+ regs.TxDone = set_TxDone_Low(regs.TxDone,
+ txFifo.size() < regs.TxFifoMark);
+ regs.TxWait = regs.TxDone;
+}
+
/**
- * This reads the device registers, which are detailed in the NS83820
- * spec sheet
+ * I/O read of device register
*/
Fault
Device::read(MemReqPtr &req, uint8_t *data)
@@ -328,118 +345,115 @@ Device::read(MemReqPtr &req, uint8_t *data)
//The mask is to give you only the offset into the device register file
Addr daddr = req->paddr & 0xfff;
- if (Regs::regSize(daddr) == 0)
- panic("invalid address: da=%#x pa=%#x va=%#x size=%d",
+ if (!regValid(daddr))
+ panic("invalid register: da=%#x pa=%#x va=%#x size=%d",
daddr, req->paddr, req->vaddr, req->size);
- if (req->size != Regs::regSize(daddr))
- panic("invalid size for reg %s: da=%#x pa=%#x va=%#x size=%d",
- Regs::regName(daddr), daddr, req->paddr, req->vaddr, req->size);
-
- DPRINTF(EthernetPIO, "read reg=%s da=%#x pa=%#x va=%#x size=%d\n",
- Regs::regName(daddr), daddr, req->paddr, req->vaddr, req->size);
-
- uint32_t &reg32 = *(uint32_t *)data;
- uint64_t &reg64 = *(uint64_t *)data;
+ const Regs::Info &info = regInfo(daddr);
+ if (!info.read)
+ panic("reading write only register: %s: da=%#x pa=%#x va=%#x size=%d",
+ info.name, daddr, req->paddr, req->vaddr, req->size);
- switch (daddr) {
- case Regs::Config:
- reg32 = regs.Config;
- break;
+ if (req->size != info.size)
+ panic("invalid size for reg %s: da=%#x pa=%#x va=%#x size=%d",
+ info.name, daddr, req->paddr, req->vaddr, req->size);
- case Regs::RxMaxCopy:
- reg32 = regs.RxMaxCopy;
- break;
+ prepareRead();
- case Regs::TxMaxCopy:
- reg32 = regs.TxMaxCopy;
- break;
+ uint64_t value = 0;
+ if (req->size == 4) {
+ uint32_t &reg = *(uint32_t *)data;
+ reg = regData32(daddr);
+ value = reg;
+ }
- case Regs::RxThreshold:
- reg32 = regs.RxThreshold;
- break;
+ if (req->size == 8) {
+ uint64_t &reg = *(uint64_t *)data;
+ reg = regData64(daddr);
+ value = reg;
+ }
- case Regs::TxThreshold:
- reg32 = regs.TxThreshold;
- break;
+ DPRINTF(EthernetPIO, "read reg=%s da=%#x pa=%#x va=%#x size=%d val=%#x\n",
+ info.name, daddr, req->paddr, req->vaddr, req->size, value);
- case Regs::IntrStatus:
- reg32 = regs.IntrStatus;
+ // reading the interrupt status register has the side effect of
+ // clearing it
+ if (daddr == Regs::IntrStatus)
devIntrClear();
- break;
- case Regs::IntrMask:
- reg32 = regs.IntrMask;
- break;
+ return No_Fault;
+}
- case Regs::RxData:
- reg64 = regs.RxData;
- break;
+/**
+ * IPR read of device register
+ */
+Fault
+Device::iprRead(Addr daddr, uint64_t &result)
+{
+ if (!regValid(daddr))
+ panic("invalid address: da=%#x", daddr);
- case Regs::RxDone:
- case Regs::RxWait:
- reg64 = Regs::set_RxDone_FifoLen(regs.RxDone,
- min(rxFifo.packets(), 255));
- break;
+ const Regs::Info &info = regInfo(daddr);
+ if (!info.read)
+ panic("reading write only register %s: da=%#x", info.name, daddr);
- case Regs::TxData:
- reg64 = regs.TxData;
- break;
+ DPRINTF(EthernetPIO, "read reg=%s da=%#x\n", info.name, daddr);
- case Regs::TxDone:
- case Regs::TxWait:
- reg64 = Regs::set_TxDone_FifoLen(regs.TxDone,
- min(txFifo.packets(), 255));
- break;
+ prepareRead();
- case Regs::HwAddr:
- reg64 = params()->eaddr;
- break;
+ if (info.size == 4)
+ result = regData32(daddr);
- default:
- panic("reading write only register %s: da=%#x pa=%#x va=%#x size=%d",
- Regs::regName(daddr), daddr, req->paddr, req->vaddr, req->size);
- }
+ if (info.size == 8)
+ result = regData64(daddr);
- DPRINTF(EthernetPIO, "read reg=%s done val=%#x\n", Regs::regName(daddr),
- Regs::regSize(daddr) == 4 ? reg32 : reg64);
+ DPRINTF(EthernetPIO, "IPR read reg=%s da=%#x val=%#x\n",
+ info.name, result);
return No_Fault;
}
+/**
+ * I/O write of device register
+ */
Fault
Device::write(MemReqPtr &req, const uint8_t *data)
{
assert(config.command & PCI_CMD_MSE);
+
+ //The mask is to give you only the offset into the device register file
Addr daddr = req->paddr & 0xfff;
- if (Regs::regSize(daddr) == 0)
+ if (!regValid(daddr))
panic("invalid address: da=%#x pa=%#x va=%#x size=%d",
daddr, req->paddr, req->vaddr, req->size);
- if (req->size != Regs::regSize(daddr))
- panic("invalid size: reg=%s da=%#x pa=%#x va=%#x size=%d",
- Regs::regName(daddr), daddr, req->paddr, req->vaddr, req->size);
+ const Regs::Info &info = regInfo(daddr);
+ if (!info.write)
+ panic("writing read only register %s: da=%#x", info.name, daddr);
+
+ if (req->size != info.size)
+ panic("invalid size for reg %s: da=%#x pa=%#x va=%#x size=%d",
+ info.name, daddr, req->paddr, req->vaddr, req->size);
uint32_t reg32 = *(uint32_t *)data;
uint64_t reg64 = *(uint64_t *)data;
DPRINTF(EthernetPIO, "write reg=%s val=%#x da=%#x pa=%#x va=%#x size=%d\n",
- Regs::regName(daddr), Regs::regSize(daddr) == 4 ? reg32 : reg64,
- daddr, req->paddr, req->vaddr, req->size);
-
+ info.name, info.size == 4 ? reg32 : reg64, daddr, req->paddr,
+ req->vaddr, req->size);
switch (daddr) {
case Regs::Config:
changeConfig(reg32);
break;
- case Regs::RxThreshold:
- regs.RxThreshold = reg32;
+ case Regs::Command:
+ command(reg32);
break;
- case Regs::TxThreshold:
- regs.TxThreshold = reg32;
+ case Regs::IntrStatus:
+ devIntrClear(regs.IntrStatus & reg32);
break;
case Regs::IntrMask:
@@ -448,9 +462,10 @@ Device::write(MemReqPtr &req, const uint8_t *data)
case Regs::RxData:
if (rxState != rxIdle)
- panic("receive machine busy with another request!");
+ panic("receive machine busy with another request! rxState=%s",
+ RxStateStrings[rxState]);
- regs.RxDone = 0;
+ regs.RxDone = Regs::RxDone_Busy;
regs.RxData = reg64;
if (rxEnable) {
rxState = rxFifoBlock;
@@ -460,19 +475,16 @@ Device::write(MemReqPtr &req, const uint8_t *data)
case Regs::TxData:
if (txState != txIdle)
- panic("transmit machine busy with another request!");
+ panic("transmit machine busy with another request! txState=%s",
+ TxStateStrings[txState]);
- regs.TxDone = 0;
+ regs.TxDone = Regs::TxDone_Busy;
regs.TxData = reg64;
if (txEnable) {
txState = txFifoBlock;
txKick();
}
break;
-
- default:
- panic("writing read only register %s: da=%#x pa=%#x va=%#x size=%d",
- Regs::regName(daddr), daddr, req->paddr, req->vaddr, req->size);
}
return No_Fault;
@@ -490,9 +502,25 @@ Device::devIntrPost(uint32_t interrupts)
"interrupt written to intStatus: intr=%#x status=%#x mask=%#x\n",
interrupts, regs.IntrStatus, regs.IntrMask);
- if ((regs.IntrStatus & regs.IntrMask)) {
+ interrupts = regs.IntrStatus & regs.IntrMask;
+
+ // Intr_RxHigh is special, we only signal it if we've emptied the fifo
+ // and then filled it above the high watermark
+ if (rxEmpty)
+ rxEmpty = false;
+ else
+ interrupts &= ~Regs::Intr_RxHigh;
+
+ // Intr_TxLow is special, we only signal it if we've filled up the fifo
+ // and then dropped below the low watermark
+ if (txFull)
+ txFull = false;
+ else
+ interrupts &= ~Regs::Intr_TxLow;
+
+ if (interrupts) {
Tick when = curTick;
- if ((regs.IntrStatus & regs.IntrMask & Regs::Intr_NoDelay) == 0)
+ if ((interrupts & Regs::Intr_NoDelay) == 0)
when += intrDelay;
cpuIntrPost(when);
}
@@ -628,12 +656,6 @@ Device::changeConfig(uint32_t newconf)
regs.Config = newconf;
- if ((changed & Regs::Config_Reset)) {
- assert(regs.Config & Regs::Config_Reset);
- reset();
- regs.Config &= ~Regs::Config_Reset;
- }
-
if ((changed & Regs::Config_IntEn)) {
cpuIntrEnable = regs.Config & Regs::Config_IntEn;
if (cpuIntrEnable) {
@@ -658,19 +680,39 @@ Device::changeConfig(uint32_t newconf)
}
void
+Device::command(uint32_t command)
+{
+ if (command & Regs::Command_Reset)
+ reset();
+}
+
+void
Device::reset()
{
using namespace Regs;
+
memset(&regs, 0, sizeof(regs));
+
+ regs.Config = 0;
+ if (params()->dedicated)
+ regs.Config |= Config_Thread;
+ regs.IntrMask = Intr_RxHigh | Intr_RxDMA | Intr_TxLow;
regs.RxMaxCopy = params()->rx_max_copy;
regs.TxMaxCopy = params()->tx_max_copy;
- regs.IntrMask = Intr_TxFifo | Intr_RxFifo | Intr_RxData;
+ regs.RxMaxIntr = params()->rx_max_intr;
+ regs.RxFifoSize = params()->rx_fifo_size;
+ regs.TxFifoSize = params()->tx_fifo_size;
+ regs.RxFifoMark = params()->rx_fifo_threshold;
+ regs.TxFifoMark = params()->tx_fifo_threshold;
+ regs.HwAddr = params()->eaddr;
rxState = rxIdle;
txState = txIdle;
rxFifo.clear();
txFifo.clear();
+ rxEmpty = false;
+ txFull = false;
}
void
@@ -681,13 +723,18 @@ Device::rxDmaCopy()
physmem->dma_write(rxDmaAddr, (uint8_t *)rxDmaData, rxDmaLen);
DPRINTF(EthernetDMA, "rx dma write paddr=%#x len=%d\n",
rxDmaAddr, rxDmaLen);
- DDUMP(EthernetDMA, rxDmaData, rxDmaLen);
+ DDUMP(EthernetData, rxDmaData, rxDmaLen);
}
void
Device::rxDmaDone()
{
rxDmaCopy();
+
+ // If the transmit state machine has a pending DMA, let it go first
+ if (txState == txBeginCopy)
+ txKick();
+
rxKick();
}
@@ -707,6 +754,8 @@ Device::rxKick()
switch (rxState) {
case rxIdle:
if (rxPioRequest) {
+ DPRINTF(EthernetPIO, "rxIdle: PIO waiting responding at %d\n",
+ curTick + pioLatency);
pioInterface->respond(rxPioRequest, curTick);
rxPioRequest = 0;
}
@@ -762,20 +811,20 @@ Device::rxKick()
break;
case rxBeginCopy:
+ if (dmaInterface && dmaInterface->busy())
+ goto exit;
+
rxDmaAddr = plat->pciToDma(Regs::get_RxData_Addr(regs.RxData));
rxDmaLen = min<int>(Regs::get_RxData_Len(regs.RxData), rxPktBytes);
rxDmaData = rxPacketBufPtr;
+ rxState = rxCopy;
if (dmaInterface) {
- if (!dmaInterface->busy()) {
- dmaInterface->doDMA(WriteInvalidate, rxDmaAddr, rxDmaLen,
- curTick, &rxDmaEvent, true);
- rxState = rxCopy;
- }
+ dmaInterface->doDMA(WriteInvalidate, rxDmaAddr, rxDmaLen,
+ curTick, &rxDmaEvent, true);
goto exit;
}
- rxState = rxCopy;
if (dmaWriteDelay != 0 || dmaWriteFactor != 0) {
Tick factor = ((rxDmaLen + ULL(63)) >> ULL(6)) * dmaWriteFactor;
Tick start = curTick + dmaWriteDelay + factor;
@@ -803,7 +852,7 @@ Device::rxKick()
}
regs.RxDone |= Regs::RxDone_Complete;
- devIntrPost(Regs::Intr_RxData);
+ devIntrPost(Regs::Intr_RxDMA);
rxState = rxIdle;
break;
@@ -832,13 +881,18 @@ Device::txDmaCopy()
physmem->dma_read((uint8_t *)txDmaData, txDmaAddr, txDmaLen);
DPRINTF(EthernetDMA, "tx dma read paddr=%#x len=%d\n",
txDmaAddr, txDmaLen);
- DDUMP(EthernetDMA, txDmaData, txDmaLen);
+ DDUMP(EthernetData, txDmaData, txDmaLen);
}
void
Device::txDmaDone()
{
txDmaCopy();
+
+ // If the receive state machine has a pending DMA, let it go first
+ if (rxState == rxBeginCopy)
+ rxKick();
+
txKick();
}
@@ -850,6 +904,7 @@ Device::transmit()
return;
}
+ uint32_t interrupts;
PacketPtr packet = txFifo.front();
if (!interface->sendPacket(packet)) {
DPRINTF(Ethernet, "Packet Transmit: failed txFifo available %d\n",
@@ -858,7 +913,6 @@ Device::transmit()
}
txFifo.pop();
-
#if TRACING_ON
if (DTRACE(Ethernet)) {
IpPtr ip(packet);
@@ -873,17 +927,17 @@ Device::transmit()
}
#endif
- DDUMP(Ethernet, packet->data, packet->length);
+ DDUMP(EthernetData, packet->data, packet->length);
txBytes += packet->length;
txPackets++;
DPRINTF(Ethernet, "Packet Transmit: successful txFifo Available %d\n",
txFifo.avail());
- if (txFifo.size() <= params()->tx_fifo_threshold)
- devIntrPost(Regs::Intr_TxFifo);
-
- devIntrPost(Regs::Intr_TxDone);
+ interrupts = Regs::Intr_TxPacket;
+ if (txFifo.size() < regs.TxFifoMark)
+ interrupts |= Regs::Intr_TxLow;
+ devIntrPost(interrupts);
reschedule:
if (!txFifo.empty() && !txEvent.scheduled()) {
@@ -908,6 +962,8 @@ Device::txKick()
switch (txState) {
case txIdle:
if (txPioRequest) {
+ DPRINTF(EthernetPIO, "txIdle: PIO waiting responding at %d\n",
+ curTick + pioLatency);
pioInterface->respond(txPioRequest, curTick + pioLatency);
txPioRequest = 0;
}
@@ -930,21 +986,20 @@ Device::txKick()
break;
case txBeginCopy:
+ if (dmaInterface && dmaInterface->busy())
+ goto exit;
+
txDmaAddr = plat->pciToDma(Regs::get_TxData_Addr(regs.TxData));
txDmaLen = Regs::get_TxData_Len(regs.TxData);
txDmaData = txPacketBufPtr;
+ txState = txCopy;
if (dmaInterface) {
- if (!dmaInterface->busy()) {
- dmaInterface->doDMA(Read, txDmaAddr, txDmaLen,
- curTick, &txDmaEvent, true);
- txState = txCopy;
- }
-
+ dmaInterface->doDMA(Read, txDmaAddr, txDmaLen,
+ curTick, &txDmaEvent, true);
goto exit;
}
- txState = txCopy;
if (dmaReadDelay != 0 || dmaReadFactor != 0) {
Tick factor = ((txDmaLen + ULL(63)) >> ULL(6)) * dmaReadFactor;
Tick start = curTick + dmaReadDelay + factor;
@@ -988,12 +1043,16 @@ Device::txKick()
}
}
txFifo.push(txPacket);
+ if (txFifo.avail() < regs.TxMaxCopy) {
+ devIntrPost(Regs::Intr_TxFull);
+ txFull = true;
+ }
txPacket = 0;
transmit();
}
regs.TxDone = txDmaLen | Regs::TxDone_Complete;
- devIntrPost(Regs::Intr_TxData);
+ devIntrPost(Regs::Intr_TxDMA);
txState = txIdle;
break;
@@ -1094,8 +1153,8 @@ Device::recvPacket(PacketPtr packet)
return true;
}
- if (rxFifo.size() >= params()->rx_fifo_threshold)
- devIntrPost(Regs::Intr_RxFifo);
+ if (rxFifo.size() >= regs.RxFifoMark)
+ devIntrPost(Regs::Intr_RxHigh);
if (!rxFifo.push(packet)) {
DPRINTF(Ethernet,
@@ -1103,7 +1162,7 @@ Device::recvPacket(PacketPtr packet)
return false;
}
- devIntrPost(Regs::Intr_RxDone);
+ devIntrPost(Regs::Intr_RxPacket);
rxKick();
return true;
}
@@ -1161,22 +1220,23 @@ Device::serialize(ostream &os)
// Serialize the PciDev base class
Base::serialize(os);
- if (rxDmaEvent.scheduled())
- rxDmaCopy();
+ if (rxState == rxCopy)
+ panic("can't serialize with an in flight dma request rxState=%s",
+ RxStateStrings[rxState]);
- if (txDmaEvent.scheduled())
- txDmaCopy();
+ if (txState == txCopy)
+ panic("can't serialize with an in flight dma request txState=%s",
+ TxStateStrings[txState]);
/*
* Serialize the device registers
*/
SERIALIZE_SCALAR(regs.Config);
- SERIALIZE_SCALAR(regs.RxMaxCopy);
- SERIALIZE_SCALAR(regs.TxMaxCopy);
- SERIALIZE_SCALAR(regs.RxThreshold);
- SERIALIZE_SCALAR(regs.TxThreshold);
SERIALIZE_SCALAR(regs.IntrStatus);
SERIALIZE_SCALAR(regs.IntrMask);
+ SERIALIZE_SCALAR(regs.RxMaxCopy);
+ SERIALIZE_SCALAR(regs.TxMaxCopy);
+ SERIALIZE_SCALAR(regs.RxMaxIntr);
SERIALIZE_SCALAR(regs.RxData);
SERIALIZE_SCALAR(regs.RxDone);
SERIALIZE_SCALAR(regs.TxData);
@@ -1187,6 +1247,7 @@ Device::serialize(ostream &os)
*/
int rxState = this->rxState;
SERIALIZE_SCALAR(rxState);
+ SERIALIZE_SCALAR(rxEmpty);
rxFifo.serialize("rxFifo", os);
bool rxPacketExists = rxPacket;
SERIALIZE_SCALAR(rxPacketExists);
@@ -1203,6 +1264,7 @@ Device::serialize(ostream &os)
*/
int txState = this->txState;
SERIALIZE_SCALAR(txState);
+ SERIALIZE_SCALAR(txFull);
txFifo.serialize("txFifo", os);
bool txPacketExists = txPacket;
SERIALIZE_SCALAR(txPacketExists);
@@ -1231,12 +1293,11 @@ Device::unserialize(Checkpoint *cp, const std::string &section)
* Unserialize the device registers
*/
UNSERIALIZE_SCALAR(regs.Config);
- UNSERIALIZE_SCALAR(regs.RxMaxCopy);
- UNSERIALIZE_SCALAR(regs.TxMaxCopy);
- UNSERIALIZE_SCALAR(regs.RxThreshold);
- UNSERIALIZE_SCALAR(regs.TxThreshold);
UNSERIALIZE_SCALAR(regs.IntrStatus);
UNSERIALIZE_SCALAR(regs.IntrMask);
+ UNSERIALIZE_SCALAR(regs.RxMaxCopy);
+ UNSERIALIZE_SCALAR(regs.TxMaxCopy);
+ UNSERIALIZE_SCALAR(regs.RxMaxIntr);
UNSERIALIZE_SCALAR(regs.RxData);
UNSERIALIZE_SCALAR(regs.RxDone);
UNSERIALIZE_SCALAR(regs.TxData);
@@ -1247,6 +1308,7 @@ Device::unserialize(Checkpoint *cp, const std::string &section)
*/
int rxState;
UNSERIALIZE_SCALAR(rxState);
+ UNSERIALIZE_SCALAR(rxEmpty);
this->rxState = (RxState) rxState;
rxFifo.unserialize("rxFifo", cp, section);
bool rxPacketExists;
@@ -1267,6 +1329,7 @@ Device::unserialize(Checkpoint *cp, const std::string &section)
*/
int txState;
UNSERIALIZE_SCALAR(txState);
+ UNSERIALIZE_SCALAR(txFull);
this->txState = (TxState) txState;
txFifo.unserialize("txFifo", cp, section);
bool txPacketExists;
@@ -1308,15 +1371,19 @@ Device::cacheAccess(MemReqPtr &req)
Tick when = curTick + pioLatency;
switch (daddr) {
- case Regs::RxDone:
+ case Regs::RxWait:
if (rxState != rxIdle) {
+ DPRINTF(EthernetPIO, "rxState=%s (not idle)... waiting\n",
+ TxStateStrings[txState]);
rxPioRequest = req;
when = 0;
}
break;
- case Regs::TxDone:
+ case Regs::TxWait:
if (txState != txIdle) {
+ DPRINTF(EthernetPIO, "txState=%s (not idle)... waiting\n",
+ TxStateStrings[txState]);
txPioRequest = req;
when = 0;
}
@@ -1385,6 +1452,7 @@ BEGIN_DECLARE_SIM_OBJECT_PARAMS(Device)
Param<Tick> tx_delay;
Param<uint32_t> rx_max_copy;
Param<uint32_t> tx_max_copy;
+ Param<uint32_t> rx_max_intr;
Param<uint32_t> rx_fifo_size;
Param<uint32_t> tx_fifo_size;
Param<uint32_t> rx_fifo_threshold;
@@ -1392,6 +1460,7 @@ BEGIN_DECLARE_SIM_OBJECT_PARAMS(Device)
Param<bool> rx_filter;
Param<string> hardware_address;
+ Param<bool> dedicated;
END_DECLARE_SIM_OBJECT_PARAMS(Device)
@@ -1424,13 +1493,15 @@ BEGIN_INIT_SIM_OBJECT_PARAMS(Device)
INIT_PARAM(tx_delay, "Transmit Delay"),
INIT_PARAM(rx_max_copy, "rx max copy"),
INIT_PARAM(tx_max_copy, "rx max copy"),
+ INIT_PARAM(rx_max_intr, "rx max intr"),
INIT_PARAM(rx_fifo_size, "max size in bytes of rxFifo"),
INIT_PARAM(tx_fifo_size, "max size in bytes of txFifo"),
INIT_PARAM(rx_fifo_threshold, "max size in bytes of rxFifo"),
INIT_PARAM(tx_fifo_threshold, "max size in bytes of txFifo"),
INIT_PARAM(rx_filter, "Enable Receive Filter"),
- INIT_PARAM(hardware_address, "Ethernet Hardware Address")
+ INIT_PARAM(hardware_address, "Ethernet Hardware Address"),
+ INIT_PARAM(dedicated, "dedicate a kernel thread to the driver")
END_INIT_SIM_OBJECT_PARAMS(Device)
@@ -1442,6 +1513,7 @@ CREATE_SIM_OBJECT(Device)
params->name = getInstanceName();
params->clock = clock;
+
params->mmu = mmu;
params->physmem = physmem;
params->configSpace = configspace;
@@ -1466,6 +1538,7 @@ CREATE_SIM_OBJECT(Device)
params->rx_delay = rx_delay;
params->rx_max_copy = rx_max_copy;
params->tx_max_copy = tx_max_copy;
+ params->rx_max_intr = rx_max_intr;
params->rx_fifo_size = rx_fifo_size;
params->tx_fifo_size = tx_fifo_size;
params->rx_fifo_threshold = rx_fifo_threshold;
@@ -1473,6 +1546,7 @@ CREATE_SIM_OBJECT(Device)
params->rx_filter = rx_filter;
params->eaddr = hardware_address;
+ params->dedicated = dedicated;
return new Device(params);
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 18:10:23 +0000