1 files changed, 35 insertions, 35 deletions

diff --git a/dev/tsunami_io.cc b/dev/tsunami_io.cc
index 724a5bfb9..0d0d27570 100644
--- a/dev/tsunami_io.cc
+++ b/dev/tsunami_io.cc
@@ -444,7 +444,7 @@ TsunamiIO::frequency() const
     return Clock::Frequency / clockInterval;
 }
 
-Fault
+Fault *
 TsunamiIO::read(MemReqPtr &req, uint8_t *data)
 {
     DPRINTF(Tsunami, "io read  va=%#x size=%d IOPorrt=%#x\n",
@@ -459,38 +459,38 @@ TsunamiIO::read(MemReqPtr &req, uint8_t *data)
           // PIC1 mask read
           case TSDEV_PIC1_MASK:
             *(uint8_t*)data = ~mask1;
-            return No_Fault;
+            return NoFault;
           case TSDEV_PIC2_MASK:
             *(uint8_t*)data = ~mask2;
-            return No_Fault;
+            return NoFault;
           case TSDEV_PIC1_ISR:
               // !!! If this is modified 64bit case needs to be too
               // Pal code has to do a 64 bit physical read because there is
               // no load physical byte instruction
               *(uint8_t*)data = picr;
-              return No_Fault;
+              return NoFault;
           case TSDEV_PIC2_ISR:
               // PIC2 not implemnted... just return 0
               *(uint8_t*)data = 0x00;
-              return No_Fault;
+              return NoFault;
           case TSDEV_TMR0_DATA:
             pitimer.counter0.read(data);
-            return No_Fault;
+            return NoFault;
           case TSDEV_TMR1_DATA:
             pitimer.counter1.read(data);
-            return No_Fault;
+            return NoFault;
           case TSDEV_TMR2_DATA:
             pitimer.counter2.read(data);
-            return No_Fault;
+            return NoFault;
           case TSDEV_RTC_DATA:
             rtc.readData(data);
-            return No_Fault;
+            return NoFault;
           case TSDEV_CTRL_PORTB:
             if (pitimer.counter2.outputHigh())
                 *data = PORTB_SPKR_HIGH;
             else
                 *data = 0x00;
-            return No_Fault;
+            return NoFault;
           default:
             panic("I/O Read - va%#x size %d\n", req->vaddr, req->size);
         }
@@ -506,7 +506,7 @@ TsunamiIO::read(MemReqPtr &req, uint8_t *data)
               // Pal code has to do a 64 bit physical read because there is
               // no load physical byte instruction
               *(uint64_t*)data = (uint64_t)picr;
-              return No_Fault;
+              return NoFault;
           default:
               panic("I/O Read - invalid size - va %#x size %d\n",
                     req->vaddr, req->size);
@@ -518,10 +518,10 @@ TsunamiIO::read(MemReqPtr &req, uint8_t *data)
     }
     panic("I/O Read - va%#x size %d\n", req->vaddr, req->size);
 
-    return No_Fault;
+    return NoFault;
 }
 
-Fault
+Fault *
 TsunamiIO::write(MemReqPtr &req, const uint8_t *data)
 {
 
@@ -550,63 +550,63 @@ TsunamiIO::write(MemReqPtr &req, const uint8_t *data)
                 tsunami->cchip->clearDRIR(55);
                 DPRINTF(Tsunami, "clearing pic interrupt\n");
             }
-            return No_Fault;
+            return NoFault;
           case TSDEV_PIC2_MASK:
             mask2 = *(uint8_t*)data;
             //PIC2 Not implemented to interrupt
-            return No_Fault;
+            return NoFault;
           case TSDEV_PIC1_ACK:
             // clear the interrupt on the PIC
             picr &= ~(1 << (*(uint8_t*)data & 0xF));
             if (!(picr & mask1))
                 tsunami->cchip->clearDRIR(55);
-            return No_Fault;
+            return NoFault;
           case TSDEV_DMA1_CMND:
-            return No_Fault;
+            return NoFault;
           case TSDEV_DMA2_CMND:
-            return No_Fault;
+            return NoFault;
           case TSDEV_DMA1_MMASK:
-            return No_Fault;
+            return NoFault;
           case TSDEV_DMA2_MMASK:
-            return No_Fault;
+            return NoFault;
           case TSDEV_PIC2_ACK:
-            return No_Fault;
+            return NoFault;
           case TSDEV_DMA1_RESET:
-            return No_Fault;
+            return NoFault;
           case TSDEV_DMA2_RESET:
-            return No_Fault;
+            return NoFault;
           case TSDEV_DMA1_MODE:
             mode1 = *(uint8_t*)data;
-            return No_Fault;
+            return NoFault;
           case TSDEV_DMA2_MODE:
             mode2 = *(uint8_t*)data;
-            return No_Fault;
+            return NoFault;
           case TSDEV_DMA1_MASK:
           case TSDEV_DMA2_MASK:
-            return No_Fault;
+            return NoFault;
           case TSDEV_TMR0_DATA:
             pitimer.counter0.write(data);
-            return No_Fault;
+            return NoFault;
           case TSDEV_TMR1_DATA:
             pitimer.counter1.write(data);
-            return No_Fault;
+            return NoFault;
           case TSDEV_TMR2_DATA:
             pitimer.counter2.write(data);
-            return No_Fault;
+            return NoFault;
           case TSDEV_TMR_CTRL:
             pitimer.writeControl(data);
-            return No_Fault;
+            return NoFault;
           case TSDEV_RTC_ADDR:
             rtc.writeAddr(data);
-            return No_Fault;
+            return NoFault;
           case TSDEV_KBD:
-            return No_Fault;
+            return NoFault;
           case TSDEV_RTC_DATA:
             rtc.writeData(data);
-            return No_Fault;
+            return NoFault;
           case TSDEV_CTRL_PORTB:
             // System Control Port B not implemented
-            return No_Fault;
+            return NoFault;
           default:
             panic("I/O Write - va%#x size %d data %#x\n", req->vaddr, req->size, (int)*data);
         }
@@ -619,7 +619,7 @@ TsunamiIO::write(MemReqPtr &req, const uint8_t *data)
     }
 
 
-    return No_Fault;
+    return NoFault;
 }
 
 void