summaryrefslogtreecommitdiff
path: root/ext/fputils
diff options
context:
space:
mode:
Diffstat (limited to 'ext/fputils')
-rw-r--r--ext/fputils/.gitignore33
-rw-r--r--ext/fputils/AUTHORS1
-rw-r--r--ext/fputils/COPYING22
-rw-r--r--ext/fputils/Doxyfile.in1792
-rw-r--r--ext/fputils/INSTALL370
-rw-r--r--ext/fputils/Makefile.am19
-rw-r--r--ext/fputils/SConscript40
-rw-r--r--ext/fputils/configure.in32
-rw-r--r--ext/fputils/doxygen.am105
-rw-r--r--ext/fputils/fp80.c247
-rw-r--r--ext/fputils/fpbits.h95
-rw-r--r--ext/fputils/include/fputils/fp80.h253
-rw-r--r--ext/fputils/m4/ax_prog_doxygen.m4532
-rw-r--r--ext/fputils/tests/Makefile.am13
-rw-r--r--ext/fputils/tests/fp80_cvfd.c120
-rw-r--r--ext/fputils/tests/fp80_cvtd.c75
-rw-r--r--ext/fputils/tests/fp80_cvtf.c82
-rw-r--r--ext/fputils/tests/test_helper.c157
-rw-r--r--ext/fputils/tests/test_helper.h59
19 files changed, 4047 insertions, 0 deletions
diff --git a/ext/fputils/.gitignore b/ext/fputils/.gitignore
new file mode 100644
index 000000000..a54a2403d
--- /dev/null
+++ b/ext/fputils/.gitignore
@@ -0,0 +1,33 @@
+/tests/Makefile
+/tests/Makefile.in
+/tests/fp80_cvfd
+/tests/fp80_cvtd
+/tests/fp80_cvtf
+/config.h
+/config.h.in
+/doxygen-doc
+/Doxyfile
+/Makefile.in
+/Makefile
+aclocal.m4
+autom4te.cache
+compile
+config.guess
+config.log
+config.status
+config.sub
+configure
+depcomp
+install-sh
+libtool
+ltmain.sh
+missing
+package.m5
+stamp-h1
+.deps
+.libs
+*.a
+*.la
+*.lo
+*.o
+*~
diff --git a/ext/fputils/AUTHORS b/ext/fputils/AUTHORS
new file mode 100644
index 000000000..0f11b15dc
--- /dev/null
+++ b/ext/fputils/AUTHORS
@@ -0,0 +1 @@
+Andreas Sandberg <andreas@sandberg.pp.se>
diff --git a/ext/fputils/COPYING b/ext/fputils/COPYING
new file mode 100644
index 000000000..23f636b86
--- /dev/null
+++ b/ext/fputils/COPYING
@@ -0,0 +1,22 @@
+Copyright (c) 2013, Andreas Sandberg
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/ext/fputils/Doxyfile.in b/ext/fputils/Doxyfile.in
new file mode 100644
index 000000000..f2cc851cf
--- /dev/null
+++ b/ext/fputils/Doxyfile.in
@@ -0,0 +1,1792 @@
+# Doxyfile 1.8.1.2
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING = UTF-8
+
+# The PROJECT_NAME tag is a single word (or sequence of words) that should
+# identify the project. Note that if you do not use Doxywizard you need
+# to put quotes around the project name if it contains spaces.
+
+PROJECT_NAME = "@PACKAGE_STRING@"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer
+# a quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF =
+
+# With the PROJECT_LOGO tag one can specify an logo or icon that is
+# included in the documentation. The maximum height of the logo should not
+# exceed 55 pixels and the maximum width should not exceed 200 pixels.
+# Doxygen will copy the logo to the output directory.
+
+PROJECT_LOGO =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY = @DX_DOCDIR@
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful if your file system
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE = 8
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding
+# "class=itcl::class" will allow you to use the command class in the
+# itcl::class meaning.
+
+TCL_SUBST =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C = NO
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING =
+
+# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
+# comments according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you
+# can mix doxygen, HTML, and XML commands with Markdown formatting.
+# Disable only in case of backward compatibilities issues.
+
+MARKDOWN_SUPPORT = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also makes the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
+# unions are shown inside the group in which they are included (e.g. using
+# @ingroup) instead of on a separate page (for HTML and Man pages) or
+# section (for LaTeX and RTF).
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
+# unions with only public data fields will be shown inline in the documentation
+# of the scope in which they are defined (i.e. file, namespace, or group
+# documentation), provided this scope is documented. If set to NO (the default),
+# structs, classes, and unions are shown on a separate page (for HTML and Man
+# pages) or section (for LaTeX and RTF).
+
+INLINE_SIMPLE_STRUCTS = NO
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penalty.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will roughly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols.
+
+SYMBOL_CACHE_SIZE = 0
+
+# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
+# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
+# their name and scope. Since this can be an expensive process and often the
+# same symbol appear multiple times in the code, doxygen keeps a cache of
+# pre-resolved symbols. If the cache is too small doxygen will become slower.
+# If the cache is too large, memory is wasted. The cache size is given by this
+# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols.
+
+LOOKUP_CACHE_SIZE = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE = NO
+
+# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.
+
+EXTRACT_PACKAGE = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespaces are hidden.
+
+EXTRACT_ANON_NSPACES = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
+# do proper type resolution of all parameters of a function it will reject a
+# match between the prototype and the implementation of a member function even
+# if there is only one candidate or it is obvious which candidate to choose
+# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
+# will still accept a match between prototype and implementation in such cases.
+
+STRICT_PROTO_MATCHING = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or macro consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and macros in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files
+# containing the references data. This must be a list of .bib files. The
+# .bib extension is automatically appended if omitted. Using this command
+# requires the bibtex tool to be installed. See also
+# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
+# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
+# feature you need bibtex and perl available in the search path.
+
+CITE_BIB_FILES =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR = YES
+
+# The WARN_NO_PARAMDOC option can be enabled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT = @top_srcdir@/
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
+# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
+# *.f90 *.f *.for *.vhd *.vhdl
+
+FILE_PATTERNS = *.c *.h
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE = config.h
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty or if
+# non of the patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
+# and it is also possible to disable source filtering for a specific pattern
+# using *.ext= (so without naming a filter). This option only has effect when
+# FILTER_SOURCE_FILES is enabled.
+
+FILTER_SOURCE_PATTERNS =
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
+
+STRIP_CODE_COMMENTS = NO
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX = YES
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header. Note that when using a custom header you are responsible
+# for the proper inclusion of any scripts and style sheets that doxygen
+# needs, which is dependent on the configuration options used.
+# It is advised to generate a default header using "doxygen -w html
+# header.html footer.html stylesheet.css YourConfigFile" and then modify
+# that header. Note that the header is subject to change so you typically
+# have to redo this when upgrading to a newer version of doxygen or when
+# changing the value of configuration settings such as GENERATE_TREEVIEW!
+
+HTML_HEADER =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# style sheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that
+# the files will be copied as-is; there are no commands or markers available.
+
+HTML_EXTRA_FILES =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the style sheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+
+HTML_DYNAMIC_SECTIONS = NO
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+# will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
+# at top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it. Since the tabs have the same information as the
+# navigation tree you can set this option to NO if you already set
+# GENERATE_TREEVIEW to YES.
+
+DISABLE_INDEX = NO
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+# Since the tree basically has the same information as the tab index you
+# could consider to set DISABLE_INDEX to NO when enabling this option.
+
+GENERATE_TREEVIEW = NO
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
+# (range [0,1..20]) that doxygen will group on one line in the generated HTML
+# documentation. Note that a value of 0 will completely suppress the enum
+# values from appearing in the overview section.
+
+ENUM_VALUES_PER_LINE = 4
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
+# (see http://www.mathjax.org) which uses client side Javascript for the
+# rendering instead of using prerendered bitmaps. Use this if you do not
+# have LaTeX installed or if you want to formulas look prettier in the HTML
+# output. When enabled you may also need to install MathJax separately and
+# configure the path to it using the MATHJAX_RELPATH option.
+
+USE_MATHJAX = NO
+
+# When MathJax is enabled you need to specify the location relative to the
+# HTML output directory using the MATHJAX_RELPATH option. The destination
+# directory should contain the MathJax.js script. For instance, if the mathjax
+# directory is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to
+# the MathJax Content Delivery Network so you can quickly see the result without
+# installing MathJax.
+# However, it is strongly recommended to install a local
+# copy of MathJax from http://www.mathjax.org before deployment.
+
+MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
+# names that should be enabled during MathJax rendering.
+
+MATHJAX_EXTENSIONS =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvantages are that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE = a4
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
+# the generated latex document. The footer should contain everything after
+# the last chapter. If it is left blank doxygen will generate a
+# standard footer. Notice: only use this tag if you know what you are doing!
+
+LATEX_FOOTER =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
+# http://en.wikipedia.org/wiki/BibTeX for more info.
+
+LATEX_BIB_STYLE = plain
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS = NO
+
+# Load style sheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# pointed to by INCLUDE_PATH will be searched when a #include is found.
+
+SEARCH_INCLUDES = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH = include/
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition that
+# overrules the definition found in the source code.
+
+EXPAND_AS_DEFINED =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all references to function-like macros
+# that are alone on a line, have an all uppercase name, and do not end with a
+# semicolon, because these will confuse the parser if not removed.
+
+SKIP_FUNCTION_MACROS = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles. For each
+# tag file the location of the external documentation should be added. The
+# format of a tag file without this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths
+# or URLs. Note that each tag file must have a unique name (where the name does
+# NOT include the path). If a tag file is not located in the directory in which
+# doxygen is run, you must also specify the path to the tagfile here.
+
+TAGFILES =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option also works with HAVE_DOT disabled, but it is recommended to
+# install and use dot, since it yields more powerful graphs.
+
+CLASS_DIAGRAMS = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS = 0
+
+# By default doxygen will use the Helvetica font for all dot files that
+# doxygen generates. When you want a differently looking font you can specify
+# the font name using DOT_FONTNAME. You need to make sure dot is able to find
+# the font, which can be done by putting it in a standard location or by setting
+# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
+# directory containing the font.
+
+DOT_FONTNAME = Helvetica
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE = 10
+
+# By default doxygen will tell dot to use the Helvetica font.
+# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
+# set the path where dot can find it.
+
+DOT_FONTPATH =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside
+# the class node. If there are many fields or methods and many nodes the
+# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
+# threshold limits the number of items for each type to make the size more
+# managable. Set this to 0 for no limit. Note that the threshold may be
+# exceeded by 50% before the limit is enforced.
+
+UML_LIMIT_NUM_FIELDS = 10
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH = NO
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will generate a graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY = YES
+
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are svg, png, jpg, or gif.
+# If left blank png will be used. If you choose svg you need to set
+# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible in IE 9+ (other browsers do not have this requirement).
+
+DOT_IMAGE_FORMAT = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+# Note that this requires a modern browser other than Internet Explorer.
+# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
+# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible. Older versions of IE do not have SVG support.
+
+INTERACTIVE_SVG = NO
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the
+# \mscfile command).
+
+MSCFILE_DIRS =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP = YES
diff --git a/ext/fputils/INSTALL b/ext/fputils/INSTALL
new file mode 100644
index 000000000..a1e89e18a
--- /dev/null
+++ b/ext/fputils/INSTALL
@@ -0,0 +1,370 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
+Inc.
+
+ Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved. This file is offered as-is,
+without warranty of any kind.
+
+Basic Installation
+==================
+
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package. Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below. The lack of an optional feature in a given package is not
+necessarily a bug. More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+ The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
+
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package, generally using the just-built uninstalled binaries.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation. When installing into a prefix owned by root, it is
+ recommended that the package be configured and built as a regular
+ user, and only the `make install' phase executed with root
+ privileges.
+
+ 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ this time using the binaries in their final installed location.
+ This target does not install anything. Running this target as a
+ regular user, particularly if the prior `make install' required
+ root privileges, verifies that the installation completed
+ correctly.
+
+ 6. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+ 7. Often, you can also type `make uninstall' to remove the installed
+ files again. In practice, not all packages have tested that
+ uninstallation works correctly, even though it is required by the
+ GNU Coding Standards.
+
+ 8. Some packages, particularly those that use Automake, provide `make
+ distcheck', which can by used by developers to test that all other
+ targets like `make install' and `make uninstall' work correctly.
+ This target is generally not run by end users.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you can use GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'. This
+is known as a "VPATH" build.
+
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them. In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+ The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+ The first method involves providing an override variable for each
+affected directory. For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'. Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated. The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the `DESTDIR' variable. For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names. The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters. On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+ Some packages offer the ability to configure how verbose the
+execution of `make' will be. For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ HP-UX `make' updates targets which have the same time stamps as
+their prerequisites, which makes it generally unusable when shipped
+generated files such as `configure' are involved. Use GNU `make'
+instead.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS
+ KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+ Use DIR as the installation prefix. *note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
+
diff --git a/ext/fputils/Makefile.am b/ext/fputils/Makefile.am
new file mode 100644
index 000000000..d635d0e36
--- /dev/null
+++ b/ext/fputils/Makefile.am
@@ -0,0 +1,19 @@
+ACLOCAL_AMFLAGS=-I m4
+
+SUBDIRS=. tests
+
+MOSTLYCLEANFILES=
+
+lib_LTLIBRARIES = libfputils.la
+
+include_HEADERS = include/fputils/fp80.h
+
+libfputils_la_SOURCES = \
+ include/fputils/fp80.h \
+ fpbits.h \
+ fp80.c
+
+
+include $(top_srcdir)/doxygen.am
+
+MOSTLYCLEANFILES += $(DX_CLEANFILES)
diff --git a/ext/fputils/SConscript b/ext/fputils/SConscript
new file mode 100644
index 000000000..0d9f63adf
--- /dev/null
+++ b/ext/fputils/SConscript
@@ -0,0 +1,40 @@
+# -*- mode:python -*-
+
+# Copyright (c) 2013 Andreas Sandberg
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met: redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer;
+# redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution;
+# neither the name of the copyright holders nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Authors: Andreas Sandberg
+
+Import('main')
+
+main.Library('fputils', [
+ main.SharedObject('fp80.c'),
+ ])
+
+main.Prepend(CPPPATH=Dir('./include'))
+main.Append(LIBS=['fputils'])
+main.Prepend(LIBPATH=[Dir('.')])
+
diff --git a/ext/fputils/configure.in b/ext/fputils/configure.in
new file mode 100644
index 000000000..59a21c18e
--- /dev/null
+++ b/ext/fputils/configure.in
@@ -0,0 +1,32 @@
+AC_INIT(libfputils, 1.0, andreas@sandberg.pp.se)
+
+AC_CONFIG_MACRO_DIR([m4])
+
+AM_INIT_AUTOMAKE([foreign -Wall -Werror])
+
+DX_PDF_FEATURE(OFF)
+DX_PS_FEATURE(OFF)
+DX_MAN_FEATURE(OFF)
+DX_INIT_DOXYGEN([libfputils])
+
+AC_REQUIRE_AUX_FILE([tap-driver.sh])
+
+AC_PROG_CC
+AM_PROG_CC_C_O
+AC_PROG_LIBTOOL
+AC_PROG_AWK
+
+AM_CFLAGS="-Wall -Werror"
+AM_CPPFLAGS="-I\$(abs_top_srcdir)/include"
+
+AC_SUBST(AM_CFLAGS)
+AC_SUBST(AM_CPPFLAGS)
+
+AC_CONFIG_HEADERS([config.h])
+
+AC_CONFIG_FILES([ \
+ Doxyfile \
+ Makefile \
+ tests/Makefile \
+])
+AC_OUTPUT
diff --git a/ext/fputils/doxygen.am b/ext/fputils/doxygen.am
new file mode 100644
index 000000000..472de63b0
--- /dev/null
+++ b/ext/fputils/doxygen.am
@@ -0,0 +1,105 @@
+## --------------------------------- ##
+## Format-independent Doxygen rules. ##
+## --------------------------------- ##
+if DX_COND_doc
+## ------------------------------- ##
+## Rules specific for HTML output. ##
+## ------------------------------- ##
+if DX_COND_html
+DX_CLEAN_HTML = @DX_DOCDIR@/html
+endif DX_COND_html
+## ------------------------------ ##
+## Rules specific for CHM output. ##
+## ------------------------------ ##
+if DX_COND_chm
+DX_CLEAN_CHM = @DX_DOCDIR@/chm
+if DX_COND_chi
+DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi
+endif DX_COND_chi
+endif DX_COND_chm
+## ------------------------------ ##
+## Rules specific for MAN output. ##
+## ------------------------------ ##
+if DX_COND_man
+DX_CLEAN_MAN = @DX_DOCDIR@/man
+endif DX_COND_man
+## ------------------------------ ##
+## Rules specific for RTF output. ##
+## ------------------------------ ##
+if DX_COND_rtf
+DX_CLEAN_RTF = @DX_DOCDIR@/rtf
+endif DX_COND_rtf
+## ------------------------------ ##
+## Rules specific for XML output. ##
+## ------------------------------ ##
+if DX_COND_xml
+DX_CLEAN_XML = @DX_DOCDIR@/xml
+endif DX_COND_xml
+## ----------------------------- ##
+## Rules specific for PS output. ##
+## ----------------------------- ##
+if DX_COND_ps
+DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps
+DX_PS_GOAL = doxygen-ps
+doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps
+@DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag
+ cd @DX_DOCDIR@/latex; \
+ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \
+ $(DX_LATEX) refman.tex; \
+ $(MAKEINDEX_PATH) refman.idx; \
+ $(DX_LATEX) refman.tex; \
+ countdown=5; \
+ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \
+ refman.log > /dev/null 2>&1 && test $$countdown -gt 0; do \
+ $(DX_LATEX) refman.tex; \
+ countdown=`expr $$countdown - 1`; \
+ done; \
+ $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi
+endif DX_COND_ps
+## ------------------------------ ##
+## Rules specific for PDF output. ##
+## ------------------------------ ##
+if DX_COND_pdf
+DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf
+DX_PDF_GOAL = doxygen-pdf
+doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf
+@DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag
+ cd @DX_DOCDIR@/latex; \
+ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \
+ $(DX_PDFLATEX) refman.tex; \
+ $(DX_MAKEINDEX) refman.idx; \
+ $(DX_PDFLATEX) refman.tex; \
+ countdown=5; \
+ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \
+ refman.log > /dev/null 2>&1 && test $$countdown -gt 0; do \
+ $(DX_PDFLATEX) refman.tex; \
+ countdown=`expr $$countdown - 1`; \
+ done; \
+ mv refman.pdf ../@PACKAGE@.pdf
+endif DX_COND_pdf
+## ------------------------------------------------- ##
+## Rules specific for LaTeX (shared for PS and PDF). ##
+## ------------------------------------------------- ##
+if DX_COND_latex
+DX_CLEAN_LATEX = @DX_DOCDIR@/latex
+endif DX_COND_latex
+.PHONY: doxygen-run doxygen-doc $(DX_PS_GOAL) $(DX_PDF_GOAL)
+.INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL)
+doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag
+doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL)
+@DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS)
+ rm -rf @DX_DOCDIR@
+ $(DX_ENV) $(DX_DOXYGEN) $(srcdir)/$(DX_CONFIG)
+DX_CLEANFILES = \
+ @DX_DOCDIR@/@PACKAGE@.tag \
+ -r \
+ $(DX_CLEAN_HTML) \
+ $(DX_CLEAN_CHM) \
+ $(DX_CLEAN_CHI) \
+ $(DX_CLEAN_MAN) \
+ $(DX_CLEAN_RTF) \
+ $(DX_CLEAN_XML) \
+ $(DX_CLEAN_PS) \
+ $(DX_CLEAN_PDF) \
+ $(DX_CLEAN_LATEX)
+endif DX_COND_doc
diff --git a/ext/fputils/fp80.c b/ext/fputils/fp80.c
new file mode 100644
index 000000000..703b07ac9
--- /dev/null
+++ b/ext/fputils/fp80.c
@@ -0,0 +1,247 @@
+/*
+ * Copyright (c) 2013, Andreas Sandberg
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <fputils/fp80.h>
+#include "fpbits.h"
+
+#include <assert.h>
+#include <stdint.h>
+
+#include <stdio.h>
+
+typedef union {
+ union {
+ uint64_t bits;
+ double value;
+ };
+} fp64_t;
+
+
+const fp80_t fp80_pinf = BUILD_FP80(0, 0, FP80_EXP_SPECIAL);
+const fp80_t fp80_ninf = BUILD_FP80(1, 0, FP80_EXP_SPECIAL);
+const fp80_t fp80_qnan = BUILD_FP80(0, FP80_FRAC_QNAN, FP80_EXP_SPECIAL);
+const fp80_t fp80_qnani = BUILD_FP80(1, FP80_FRAC_QNANI, FP80_EXP_SPECIAL);
+const fp80_t fp80_snan = BUILD_FP80(0, FP80_FRAC_SNAN, FP80_EXP_SPECIAL);
+const fp80_t fp80_nan = BUILD_FP80(0, FP80_FRAC_QNAN, FP80_EXP_SPECIAL);
+
+static const fp64_t fp64_pinf = BUILD_FP64(0, 0, FP64_EXP_SPECIAL);
+static const fp64_t fp64_ninf = BUILD_FP64(1, 0, FP64_EXP_SPECIAL);
+static const fp64_t fp64_qnan = BUILD_FP64(0, FP64_FRAC_QNAN,
+ FP64_EXP_SPECIAL);
+static const fp64_t fp64_nqnan = BUILD_FP64(1, FP64_FRAC_QNAN,
+ FP64_EXP_SPECIAL);
+static const fp64_t fp64_qnani = BUILD_FP64(1, FP64_FRAC_QNANI,
+ FP64_EXP_SPECIAL);
+static const fp64_t fp64_snan = BUILD_FP64(0, FP64_FRAC_SNAN,
+ FP64_EXP_SPECIAL);
+static const fp64_t fp64_nsnan = BUILD_FP64(1, FP64_FRAC_SNAN,
+ FP64_EXP_SPECIAL);
+
+static double
+build_fp64(int sign, uint64_t frac, int exp)
+{
+ const fp64_t f = BUILD_FP64(sign, frac, exp);
+
+ return f.value;
+}
+
+int
+fp80_sgn(fp80_t fp80)
+{
+ return (fp80.u.repr.se & FP80_SIGN_BIT) ? -1 : 1;
+}
+
+int
+fp80_isspecial(fp80_t fp80)
+{
+ const int exp = FP80_EXP(fp80);
+
+ return exp == FP80_EXP_SPECIAL;
+}
+
+int
+fp80_isinf(fp80_t fp80)
+{
+ const uint64_t frac = FP80_FRAC(fp80);
+
+ return fp80_isspecial(fp80) && frac == 0 ? fp80_sgn(fp80) : 0;
+}
+
+
+int
+fp80_isqnan(fp80_t fp80)
+{
+ const uint64_t frac = FP80_FRAC(fp80);
+
+ return fp80_isspecial(fp80) && (frac & FP80_QNAN_BIT);
+}
+
+int
+fp80_isqnani(fp80_t fp80)
+{
+ const uint64_t frac_low = fp80.u.repr.fi & (FP80_FRAC_MASK >> 1);
+
+ return fp80_isqnan(fp80) && (fp80.u.repr.se & FP80_SIGN_BIT) && !frac_low;
+}
+
+int
+fp80_issnan(fp80_t fp80)
+{
+ const uint64_t frac = FP80_FRAC(fp80);
+
+ return fp80_isspecial(fp80) && !(frac & FP80_QNAN_BIT) && frac;
+}
+
+int
+fp80_isfinite(fp80_t fp80)
+{
+ return !fp80_isnan(fp80) && !fp80_isinf(fp80);
+}
+
+int
+fp80_isnan(fp80_t fp80)
+{
+ return fp80_issnan(fp80) || fp80_isqnan(fp80) ? fp80_sgn(fp80) : 0;
+}
+
+int
+fp80_iszero(fp80_t fp80)
+{
+ return fp80.u.repr.fi == 0 && FP80_EXP(fp80) == 0 ? fp80_sgn(fp80) : 0;
+}
+
+int
+fp80_isnormal(fp80_t fp80)
+{
+ return FP80_EXP(fp80) != 0 && !fp80_isspecial(fp80) ?
+ fp80_sgn(fp80) : 0;
+}
+
+int
+fp80_issubnormal(fp80_t fp80)
+{
+ return FP80_FRAC(fp80) && FP80_EXP(fp80) == 0 ? fp80_sgn(fp80) : 0;
+}
+
+int
+fp80_classify(fp80_t fp80)
+{
+ if (fp80_issubnormal(fp80)) {
+ return FP_SUBNORMAL;
+ } else if (fp80_iszero(fp80)) {
+ return FP_ZERO;
+ } else if (fp80_isinf(fp80)) {
+ return FP_INFINITE;
+ } else if (fp80_isnan(fp80)) {
+ return FP_NAN;
+ } else {
+ assert(fp80_isfinite(fp80));
+ return FP_NORMAL;
+ }
+}
+
+double
+fp80_cvtd(fp80_t fp80)
+{
+ const int sign = fp80.u.repr.se & FP80_SIGN_BIT;
+
+ if (!fp80_isspecial(fp80)) {
+ const uint64_t frac = fp80.u.repr.fi;
+ const int unb_exp = FP80_EXP(fp80) - FP80_EXP_BIAS;
+ const int fp64_exp = unb_exp + FP64_EXP_BIAS;
+ const uint64_t fp64_frac = frac >> (FP80_FRAC_BITS - FP64_FRAC_BITS);
+
+ if (fp64_exp > 0 && fp64_exp < FP64_EXP_SPECIAL) {
+ /* These numbers fall in the range of what we can express
+ * as normals */
+ return build_fp64(sign, fp64_frac, fp64_exp);
+ } else if (fp64_exp <= 0) {
+ uint64_t fp64_denormal_frac = fp64_frac >> (-fp64_exp);
+ /* Generate a denormal or zero */
+ return build_fp64(sign, fp64_denormal_frac, 0);
+ } else {
+ /* Infinity */
+ return build_fp64(sign, 0, FP64_EXP_SPECIAL);
+ }
+ } else {
+ if (fp80_isinf(fp80)) {
+ return build_fp64(sign, 0, FP64_EXP_SPECIAL);
+ } else if (fp80_issnan(fp80)) {
+ return fp80_sgn(fp80) > 0 ? fp64_snan.value : fp64_nsnan.value;
+ } else if (fp80_isqnani(fp80)) {
+ return fp64_qnani.value;
+ } else {
+ assert(fp80_isqnan(fp80));
+ return fp80_sgn(fp80) > 0 ? fp64_qnan.value : fp64_nqnan.value;
+ }
+ }
+}
+
+fp80_t
+fp80_cvfd(double value)
+{
+ const fp64_t fp64 = { .value = value };
+ const uint64_t frac = FP64_FRAC(fp64);
+ const unsigned exp = FP64_EXP(fp64);
+ const int unb_exp = exp - FP64_EXP_BIAS;
+ const uint64_t fp80_frac = frac << (FP80_FRAC_BITS - FP64_FRAC_BITS);
+
+ if (exp != 0) {
+ // Normal, inf, nan
+ const unsigned fp80_exp = exp == FP64_EXP_SPECIAL ?
+ FP80_EXP_SPECIAL : (unb_exp + FP80_EXP_BIAS);
+ const fp80_t fp80 = BUILD_FP80(fp64.bits & FP64_SIGN_BIT,
+ fp80_frac, fp80_exp);
+ return fp80;
+ } else if (exp == 0 && frac == 0) {
+ // Zero
+ const fp80_t fp80 = BUILD_FP80(fp64.bits & FP64_SIGN_BIT, 0, 0);
+ return fp80;
+ } else {
+ // Denormal
+ uint64_t fp80_fi = fp80_frac;
+ int shift_amt = 0;
+ while (!(fp80_fi & FP80_INT_BIT)) {
+ fp80_fi <<= 1;
+ ++shift_amt;
+ }
+ const unsigned fp80_exp = (unb_exp - shift_amt) + FP80_EXP_BIAS;
+ const fp80_t fp80 = BUILD_FP80(fp64.bits & FP64_SIGN_BIT,
+ fp80_fi, fp80_exp);
+ return fp80;
+ }
+}
+
+void
+fp80_debug_dump(FILE *fout, fp80_t fp80)
+{
+ fprintf(fout, "sgn: %i, int: %i, frac: 0x%llx, exp: 0x%x (%i)\n",
+ fp80_sgn(fp80), !!(fp80.u.repr.fi & FP80_INT_BIT), FP80_FRAC(fp80),
+ FP80_EXP(fp80), FP80_EXP(fp80) - FP80_EXP_BIAS);
+}
diff --git a/ext/fputils/fpbits.h b/ext/fputils/fpbits.h
new file mode 100644
index 000000000..9fb934843
--- /dev/null
+++ b/ext/fputils/fpbits.h
@@ -0,0 +1,95 @@
+/*
+ * Copyright (c) 2013, Andreas Sandberg
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _FPBITS_H
+#define _FPBITS_H
+
+#include <stdint.h>
+
+#define FP80_FRAC_BITS 63
+#define FP80_INT_BIT 0x8000000000000000ULL
+#define FP80_QNAN_BIT 0x4000000000000000ULL
+#define FP80_FRAC_MASK 0x7fffffffffffffffULL
+#define FP80_EXP_MASK 0x7fff
+#define FP80_SIGN_BIT 0x8000
+#define FP80_EXP_BIAS 0x3fff
+
+#define FP80_EXP_SPECIAL 0x7fff
+#define FP80_FRAC_SNAN 0x3fffffffffffffffULL
+#define FP80_FRAC_QNAN 0x7fffffffffffffffULL
+#define FP80_FRAC_QNANI 0x4000000000000000ULL
+
+
+#define FP64_EXP_SHIFT 52
+#define FP64_FRAC_BITS 52
+#define FP64_SIGN_BIT 0x8000000000000000ULL
+#define FP64_EXP_MASK 0x7ff0000000000000ULL
+#define FP64_FRAC_MASK 0x000fffffffffffffULL
+#define FP64_EXP_BIAS 0x3ff
+
+#define FP64_EXP_SPECIAL 0x7ff
+#define FP64_FRAC_SNAN 0x0007ffffffffffffULL
+#define FP64_FRAC_QNAN 0x000fffffffffffffULL
+#define FP64_FRAC_QNANI 0x0008000000000000ULL
+
+#define BUILD_IFP64(sign, frac, exp) \
+ ((sign) ? FP64_SIGN_BIT : 0) | \
+ (((uint64_t)(exp) << FP64_EXP_SHIFT) & FP64_EXP_MASK) | \
+ ((frac) & FP64_FRAC_MASK)
+
+#define BUILD_FP64(sign, frac, exp) \
+ { .bits = BUILD_IFP64(sign, frac, exp) }
+
+#define BUILD_FP80_SE(sign, exp) \
+ ((sign) ? FP80_SIGN_BIT : 0) | \
+ ((exp) & FP80_EXP_MASK)
+
+#define BUILD_FP80_FI(frac, exp) \
+ ((exp) ? FP80_INT_BIT : 0) | \
+ ((frac) & FP80_FRAC_MASK)
+
+#define BUILD_FP80(sign, frac, exp) \
+ { \
+ .u.repr.se = BUILD_FP80_SE(sign, exp), \
+ .u.repr.fi = BUILD_FP80_FI(frac, exp) \
+ }
+
+#define FP80_FRAC(fp80) \
+ (fp80.u.repr.fi & FP80_FRAC_MASK)
+
+#define FP80_EXP(fp80) \
+ (fp80.u.repr.se & FP80_EXP_MASK)
+
+#define FP64_FRAC(fp64) \
+ (fp64.bits & FP64_FRAC_MASK)
+
+#define FP64_EXP(fp80) \
+ ((fp64.bits & FP64_EXP_MASK) >> FP64_EXP_SHIFT)
+
+#endif
diff --git a/ext/fputils/include/fputils/fp80.h b/ext/fputils/include/fputils/fp80.h
new file mode 100644
index 000000000..e584baab4
--- /dev/null
+++ b/ext/fputils/include/fputils/fp80.h
@@ -0,0 +1,253 @@
+/*
+ * Copyright (c) 2013, Andreas Sandberg
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _FP80_H
+#define _FP80_H 1
+
+#include <math.h>
+#include <stdint.h>
+#include <stdio.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @defgroup fp80 80-bit Floats
+ * Functions handling 80-bit floats.
+ *
+ * @{
+ */
+
+/** Internal representation of an 80-bit float. */
+typedef struct {
+ union {
+ char bits[10];
+ struct {
+ uint64_t fi;
+ uint16_t se;
+ } repr;
+ } u;
+} fp80_t;
+
+/** Constant representing +inf */
+extern const fp80_t fp80_pinf;
+/** Constant representing -inf */
+extern const fp80_t fp80_ninf;
+/** Constant representing a quiet NaN */
+extern const fp80_t fp80_qnan;
+/** Constant representing a quiet indefinite NaN */
+extern const fp80_t fp80_qnani;
+/** Constant representing a signaling NaN */
+extern const fp80_t fp80_snan;
+/** Alias for fp80_qnan */
+extern const fp80_t fp80_nan;
+
+/**
+ * Is the value a special floating point value?
+ *
+ * Determine if a floating point value is one of the special values
+ * (i.e., one of the infinities or NaNs). In practice, this function
+ * only checks if the exponent is set to the maximum value supported
+ * by the binary representation, which is a reserved value used for
+ * such special numbers.
+ *
+ * @param fp80 value to analyze.
+ * @return 1 if the value is special, 0 otherwise.
+ */
+int fp80_isspecial(fp80_t fp80);
+/**
+ * Is the value a quiet NaN?
+ *
+ * @param fp80 value to analyze.
+ * @return 1 if true, 0 otherwise.
+ */
+int fp80_isqnan(fp80_t fp80);
+/**
+ * Is the value an indefinite quiet NaN?
+ *
+ * @param fp80 value to analyze.
+ * @return 1 if true, 0 otherwise.
+ */
+int fp80_isqnani(fp80_t fp80);
+/**
+ * Is the value a signaling NaN?
+ *
+ * @param fp80 value to analyze.
+ * @return 1 if true, 0 otherwise.
+ */
+int fp80_issnan(fp80_t fp80);
+
+/**
+ * Classify a floating point number.
+ *
+ * This function implements the same classification as the standard
+ * fpclassify() function. It returns one of the following floating
+ * point classes:
+ * <ul>
+ * <li>FP_NAN - The value is NaN.
+ * <li>FP_INFINITE - The value is either +inf or -inf.
+ * <li>FP_ZERO - The value is either +0 or -0.
+ * <li>FP_SUBNORMAL - The value is to small to be represented as a
+ * normalized float. See fp80_issubnormal().
+ * <li>FP_NORMAL - The value is neither of above.
+ * </ul>
+ *
+ * @param fp80 value to analyze.
+ * @return Floating point classification.
+ */
+int fp80_classify(fp80_t fp80);
+
+/**
+ * Is a value finite?
+ *
+ * Check if a value is a finite value. That is, not one of the
+ * infinities or NaNs.
+ *
+ * @param fp80 value to analyze.
+ * @return -1 if negative finite, +1 if positive finite, 0 otherwise.
+ */
+int fp80_isfinite(fp80_t fp80);
+/**
+ * Is the value a non-zero normal?
+ *
+ * This function checks if a floating point value is a normal (having
+ * an exponent larger or equal to 1) or not. See fp80_issubnormal()
+ * for a description of what a denormal value is.
+ *
+ * @see fp80_issubnormal()
+ *
+ * @param fp80 value to analyze.
+ * @return -1 if negative normal, +1 if positive normal, 0 otherwise.
+ */
+int fp80_isnormal(fp80_t fp80);
+/**
+ * Is the value a NaN of any kind?
+ *
+ * @param fp80 value to analyze.
+ * @return -1 if negative NaN, +1 if positive NaN, 0 otherwise.
+ */
+int fp80_isnan(fp80_t fp80);
+/**
+ * Is the value one of the infinities?
+ *
+ * @param fp80 value to analyze.
+ * @return -1 if -inf, +1 if +inf, 0 otherwise.
+ */
+int fp80_isinf(fp80_t fp80);
+/**
+ * Determine value of the sign-bit of a floating point number.
+ *
+ * @note Floats can represent both positive and negative zeros.
+ *
+ * @param fp80 value to analyze.
+ * @return -1 if negative, +1 if positive.
+ */
+int fp80_sgn(fp80_t fp80);
+/**
+ * Is the value zero?
+ *
+ * @param fp80 value to analyze.
+ * @return -1 if negative zero, +1 if positive zero, 0 otherwise.
+ */
+int fp80_iszero(fp80_t fp80);
+/**
+ * Is the value a denormal?
+ *
+ * Numbers that are close to the minimum of what can be stored in a
+ * floating point number start loosing precision because bits in the
+ * fraction get used (implicitly) to store parts of the negative
+ * exponent (i.e., the exponent is saturated and the fraction is less
+ * than 1). Such numbers are known as denormals. This function checks
+ * whether a float is a denormal or not.
+ *
+ * @param fp80 value to analyze.
+ * @return -1 if negative denormal, +1 if positive denormal, 0 otherwise.
+ */
+int fp80_issubnormal(fp80_t fp80);
+
+/**
+ * Convert an 80-bit float to a 64-bit double.
+ *
+ * This function converts an 80-bit float into a standard 64-bit
+ * double. This conversion is inherently lossy since a double can only
+ * represent a subset of what an 80-bit float can represent. The
+ * fraction of the source value will always be truncated to fit the
+ * lower precision. If a value falls outside of the range that can be
+ * accurately represented by double by truncating the fraction, one of
+ * the following happens:
+ * <ul>
+ * <li>A denormal will be generated if that can approximate the
+ * value.
+ * <li>[-]0 will be generated if the magnitude of the value is too
+ * small to be represented at all.
+ * <li>+-Inf will be generated if the magnitude of the value is too
+ * large to be represented.
+ * </ul>
+ *
+ * NaN values will be preserved across the conversion.
+ *
+ * @param fp80 Source value to convert.
+ * @return 64-bit version of the float.
+ */
+double fp80_cvtd(fp80_t fp80);
+
+/**
+ * Convert an 64-bit double to an 80-bit float.
+ *
+ * This function converts a standard 64-bit double into an 80-bit
+ * float. This conversion is completely lossless since the 80-bit
+ * float represents a superset of what a 64-bit double can
+ * represent.
+ *
+ * @note Denormals will be converted to normalized values.
+ *
+ * @param fpd Source value to convert.
+ * @return 64-bit version of the float.
+ */
+fp80_t fp80_cvfd(double fpd);
+
+/**
+ * Dump the components of an 80-bit float to a file.
+ *
+ * @warning This function is intended for debugging and the format of
+ * the output is not guaranteed to be stable.
+ *
+ * @param fout Output stream (e.g., stdout)
+ * @param fp80 value to dump.
+ */
+void fp80_debug_dump(FILE *fout, fp80_t fp80);
+
+/** @} */
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif
diff --git a/ext/fputils/m4/ax_prog_doxygen.m4 b/ext/fputils/m4/ax_prog_doxygen.m4
new file mode 100644
index 000000000..44b22b00a
--- /dev/null
+++ b/ext/fputils/m4/ax_prog_doxygen.m4
@@ -0,0 +1,532 @@
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_prog_doxygen.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# DX_INIT_DOXYGEN(PROJECT-NAME, DOXYFILE-PATH, [OUTPUT-DIR])
+# DX_DOXYGEN_FEATURE(ON|OFF)
+# DX_DOT_FEATURE(ON|OFF)
+# DX_HTML_FEATURE(ON|OFF)
+# DX_CHM_FEATURE(ON|OFF)
+# DX_CHI_FEATURE(ON|OFF)
+# DX_MAN_FEATURE(ON|OFF)
+# DX_RTF_FEATURE(ON|OFF)
+# DX_XML_FEATURE(ON|OFF)
+# DX_PDF_FEATURE(ON|OFF)
+# DX_PS_FEATURE(ON|OFF)
+#
+# DESCRIPTION
+#
+# The DX_*_FEATURE macros control the default setting for the given
+# Doxygen feature. Supported features are 'DOXYGEN' itself, 'DOT' for
+# generating graphics, 'HTML' for plain HTML, 'CHM' for compressed HTML
+# help (for MS users), 'CHI' for generating a seperate .chi file by the
+# .chm file, and 'MAN', 'RTF', 'XML', 'PDF' and 'PS' for the appropriate
+# output formats. The environment variable DOXYGEN_PAPER_SIZE may be
+# specified to override the default 'a4wide' paper size.
+#
+# By default, HTML, PDF and PS documentation is generated as this seems to
+# be the most popular and portable combination. MAN pages created by
+# Doxygen are usually problematic, though by picking an appropriate subset
+# and doing some massaging they might be better than nothing. CHM and RTF
+# are specific for MS (note that you can't generate both HTML and CHM at
+# the same time). The XML is rather useless unless you apply specialized
+# post-processing to it.
+#
+# The macros mainly control the default state of the feature. The use can
+# override the default by specifying --enable or --disable. The macros
+# ensure that contradictory flags are not given (e.g.,
+# --enable-doxygen-html and --enable-doxygen-chm,
+# --enable-doxygen-anything with --disable-doxygen, etc.) Finally, each
+# feature will be automatically disabled (with a warning) if the required
+# programs are missing.
+#
+# Once all the feature defaults have been specified, call DX_INIT_DOXYGEN
+# with the following parameters: a one-word name for the project for use
+# as a filename base etc., an optional configuration file name (the
+# default is 'Doxyfile', the same as Doxygen's default), and an optional
+# output directory name (the default is 'doxygen-doc').
+#
+# Automake Support
+#
+# The following is a template aminclude.am file for use with Automake.
+# Make targets and variables values are controlled by the various
+# DX_COND_* conditionals set by autoconf.
+#
+# The provided targets are:
+#
+# doxygen-doc: Generate all doxygen documentation.
+#
+# doxygen-run: Run doxygen, which will generate some of the
+# documentation (HTML, CHM, CHI, MAN, RTF, XML)
+# but will not do the post processing required
+# for the rest of it (PS, PDF, and some MAN).
+#
+# doxygen-man: Rename some doxygen generated man pages.
+#
+# doxygen-ps: Generate doxygen PostScript documentation.
+#
+# doxygen-pdf: Generate doxygen PDF documentation.
+#
+# Note that by default these are not integrated into the automake targets.
+# If doxygen is used to generate man pages, you can achieve this
+# integration by setting man3_MANS to the list of man pages generated and
+# then adding the dependency:
+#
+# $(man3_MANS): doxygen-doc
+#
+# This will cause make to run doxygen and generate all the documentation.
+#
+# The following variable is intended for use in Makefile.am:
+#
+# DX_CLEANFILES = everything to clean.
+#
+# Then add this variable to MOSTLYCLEANFILES.
+#
+# ----- begin aminclude.am -------------------------------------
+#
+# ## --------------------------------- ##
+# ## Format-independent Doxygen rules. ##
+# ## --------------------------------- ##
+#
+# if DX_COND_doc
+#
+# ## ------------------------------- ##
+# ## Rules specific for HTML output. ##
+# ## ------------------------------- ##
+#
+# if DX_COND_html
+#
+# DX_CLEAN_HTML = @DX_DOCDIR@/html
+#
+# endif DX_COND_html
+#
+# ## ------------------------------ ##
+# ## Rules specific for CHM output. ##
+# ## ------------------------------ ##
+#
+# if DX_COND_chm
+#
+# DX_CLEAN_CHM = @DX_DOCDIR@/chm
+#
+# if DX_COND_chi
+#
+# DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi
+#
+# endif DX_COND_chi
+#
+# endif DX_COND_chm
+#
+# ## ------------------------------ ##
+# ## Rules specific for MAN output. ##
+# ## ------------------------------ ##
+#
+# if DX_COND_man
+#
+# DX_CLEAN_MAN = @DX_DOCDIR@/man
+#
+# endif DX_COND_man
+#
+# ## ------------------------------ ##
+# ## Rules specific for RTF output. ##
+# ## ------------------------------ ##
+#
+# if DX_COND_rtf
+#
+# DX_CLEAN_RTF = @DX_DOCDIR@/rtf
+#
+# endif DX_COND_rtf
+#
+# ## ------------------------------ ##
+# ## Rules specific for XML output. ##
+# ## ------------------------------ ##
+#
+# if DX_COND_xml
+#
+# DX_CLEAN_XML = @DX_DOCDIR@/xml
+#
+# endif DX_COND_xml
+#
+# ## ----------------------------- ##
+# ## Rules specific for PS output. ##
+# ## ----------------------------- ##
+#
+# if DX_COND_ps
+#
+# DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps
+#
+# DX_PS_GOAL = doxygen-ps
+#
+# doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps
+#
+# @DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag
+# cd @DX_DOCDIR@/latex; \
+# rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \
+# $(DX_LATEX) refman.tex; \
+# $(MAKEINDEX_PATH) refman.idx; \
+# $(DX_LATEX) refman.tex; \
+# countdown=5; \
+# while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \
+# refman.log > /dev/null 2>&1 \
+# && test $$countdown -gt 0; do \
+# $(DX_LATEX) refman.tex; \
+# countdown=`expr $$countdown - 1`; \
+# done; \
+# $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi
+#
+# endif DX_COND_ps
+#
+# ## ------------------------------ ##
+# ## Rules specific for PDF output. ##
+# ## ------------------------------ ##
+#
+# if DX_COND_pdf
+#
+# DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf
+#
+# DX_PDF_GOAL = doxygen-pdf
+#
+# doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf
+#
+# @DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag
+# cd @DX_DOCDIR@/latex; \
+# rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \
+# $(DX_PDFLATEX) refman.tex; \
+# $(DX_MAKEINDEX) refman.idx; \
+# $(DX_PDFLATEX) refman.tex; \
+# countdown=5; \
+# while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \
+# refman.log > /dev/null 2>&1 \
+# && test $$countdown -gt 0; do \
+# $(DX_PDFLATEX) refman.tex; \
+# countdown=`expr $$countdown - 1`; \
+# done; \
+# mv refman.pdf ../@PACKAGE@.pdf
+#
+# endif DX_COND_pdf
+#
+# ## ------------------------------------------------- ##
+# ## Rules specific for LaTeX (shared for PS and PDF). ##
+# ## ------------------------------------------------- ##
+#
+# if DX_COND_latex
+#
+# DX_CLEAN_LATEX = @DX_DOCDIR@/latex
+#
+# endif DX_COND_latex
+#
+# .PHONY: doxygen-run doxygen-doc $(DX_PS_GOAL) $(DX_PDF_GOAL)
+#
+# .INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL)
+#
+# doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag
+#
+# doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL)
+#
+# @DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS)
+# rm -rf @DX_DOCDIR@
+# $(DX_ENV) $(DX_DOXYGEN) $(srcdir)/$(DX_CONFIG)
+#
+# DX_CLEANFILES = \
+# @DX_DOCDIR@/@PACKAGE@.tag \
+# -r \
+# $(DX_CLEAN_HTML) \
+# $(DX_CLEAN_CHM) \
+# $(DX_CLEAN_CHI) \
+# $(DX_CLEAN_MAN) \
+# $(DX_CLEAN_RTF) \
+# $(DX_CLEAN_XML) \
+# $(DX_CLEAN_PS) \
+# $(DX_CLEAN_PDF) \
+# $(DX_CLEAN_LATEX)
+#
+# endif DX_COND_doc
+#
+# ----- end aminclude.am ---------------------------------------
+#
+# LICENSE
+#
+# Copyright (c) 2009 Oren Ben-Kiki <oren@ben-kiki.org>
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice
+# and this notice are preserved. This file is offered as-is, without any
+# warranty.
+
+#serial 12
+
+## ----------##
+## Defaults. ##
+## ----------##
+
+DX_ENV=""
+AC_DEFUN([DX_FEATURE_doc], ON)
+AC_DEFUN([DX_FEATURE_dot], OFF)
+AC_DEFUN([DX_FEATURE_man], OFF)
+AC_DEFUN([DX_FEATURE_html], ON)
+AC_DEFUN([DX_FEATURE_chm], OFF)
+AC_DEFUN([DX_FEATURE_chi], OFF)
+AC_DEFUN([DX_FEATURE_rtf], OFF)
+AC_DEFUN([DX_FEATURE_xml], OFF)
+AC_DEFUN([DX_FEATURE_pdf], ON)
+AC_DEFUN([DX_FEATURE_ps], ON)
+
+## --------------- ##
+## Private macros. ##
+## --------------- ##
+
+# DX_ENV_APPEND(VARIABLE, VALUE)
+# ------------------------------
+# Append VARIABLE="VALUE" to DX_ENV for invoking doxygen.
+AC_DEFUN([DX_ENV_APPEND], [AC_SUBST([DX_ENV], ["$DX_ENV $1='$2'"])])
+
+# DX_DIRNAME_EXPR
+# ---------------
+# Expand into a shell expression prints the directory part of a path.
+AC_DEFUN([DX_DIRNAME_EXPR],
+ [[expr ".$1" : '\(\.\)[^/]*$' \| "x$1" : 'x\(.*\)/[^/]*$']])
+
+# DX_IF_FEATURE(FEATURE, IF-ON, IF-OFF)
+# -------------------------------------
+# Expands according to the M4 (static) status of the feature.
+AC_DEFUN([DX_IF_FEATURE], [ifelse(DX_FEATURE_$1, ON, [$2], [$3])])
+
+# DX_REQUIRE_PROG(VARIABLE, PROGRAM)
+# ----------------------------------
+# Require the specified program to be found for the DX_CURRENT_FEATURE to work.
+AC_DEFUN([DX_REQUIRE_PROG], [
+AC_PATH_TOOL([$1], [$2])
+if test "$DX_FLAG_[]DX_CURRENT_FEATURE$$1" = 1; then
+ AC_MSG_WARN([$2 not found - will not DX_CURRENT_DESCRIPTION])
+ AC_SUBST(DX_FLAG_[]DX_CURRENT_FEATURE, 0)
+fi
+])
+
+# DX_TEST_FEATURE(FEATURE)
+# ------------------------
+# Expand to a shell expression testing whether the feature is active.
+AC_DEFUN([DX_TEST_FEATURE], [test "$DX_FLAG_$1" = 1])
+
+# DX_CHECK_DEPEND(REQUIRED_FEATURE, REQUIRED_STATE)
+# -------------------------------------------------
+# Verify that a required features has the right state before trying to turn on
+# the DX_CURRENT_FEATURE.
+AC_DEFUN([DX_CHECK_DEPEND], [
+test "$DX_FLAG_$1" = "$2" \
+|| AC_MSG_ERROR([doxygen-DX_CURRENT_FEATURE ifelse([$2], 1,
+ requires, contradicts) doxygen-DX_CURRENT_FEATURE])
+])
+
+# DX_CLEAR_DEPEND(FEATURE, REQUIRED_FEATURE, REQUIRED_STATE)
+# ----------------------------------------------------------
+# Turn off the DX_CURRENT_FEATURE if the required feature is off.
+AC_DEFUN([DX_CLEAR_DEPEND], [
+test "$DX_FLAG_$1" = "$2" || AC_SUBST(DX_FLAG_[]DX_CURRENT_FEATURE, 0)
+])
+
+# DX_FEATURE_ARG(FEATURE, DESCRIPTION,
+# CHECK_DEPEND, CLEAR_DEPEND,
+# REQUIRE, DO-IF-ON, DO-IF-OFF)
+# --------------------------------------------
+# Parse the command-line option controlling a feature. CHECK_DEPEND is called
+# if the user explicitly turns the feature on (and invokes DX_CHECK_DEPEND),
+# otherwise CLEAR_DEPEND is called to turn off the default state if a required
+# feature is disabled (using DX_CLEAR_DEPEND). REQUIRE performs additional
+# requirement tests (DX_REQUIRE_PROG). Finally, an automake flag is set and
+# DO-IF-ON or DO-IF-OFF are called according to the final state of the feature.
+AC_DEFUN([DX_ARG_ABLE], [
+ AC_DEFUN([DX_CURRENT_FEATURE], [$1])
+ AC_DEFUN([DX_CURRENT_DESCRIPTION], [$2])
+ AC_ARG_ENABLE(doxygen-$1,
+ [AS_HELP_STRING(DX_IF_FEATURE([$1], [--disable-doxygen-$1],
+ [--enable-doxygen-$1]),
+ DX_IF_FEATURE([$1], [don't $2], [$2]))],
+ [
+case "$enableval" in
+#(
+y|Y|yes|Yes|YES)
+ AC_SUBST([DX_FLAG_$1], 1)
+ $3
+;; #(
+n|N|no|No|NO)
+ AC_SUBST([DX_FLAG_$1], 0)
+;; #(
+*)
+ AC_MSG_ERROR([invalid value '$enableval' given to doxygen-$1])
+;;
+esac
+], [
+AC_SUBST([DX_FLAG_$1], [DX_IF_FEATURE([$1], 1, 0)])
+$4
+])
+if DX_TEST_FEATURE([$1]); then
+ $5
+ :
+fi
+AM_CONDITIONAL(DX_COND_$1, DX_TEST_FEATURE([$1]))
+if DX_TEST_FEATURE([$1]); then
+ $6
+ :
+else
+ $7
+ :
+fi
+])
+
+## -------------- ##
+## Public macros. ##
+## -------------- ##
+
+# DX_XXX_FEATURE(DEFAULT_STATE)
+# -----------------------------
+AC_DEFUN([DX_DOXYGEN_FEATURE], [AC_DEFUN([DX_FEATURE_doc], [$1])])
+AC_DEFUN([DX_DOT_FEATURE], [AC_DEFUN([DX_FEATURE_dot], [$1])])
+AC_DEFUN([DX_MAN_FEATURE], [AC_DEFUN([DX_FEATURE_man], [$1])])
+AC_DEFUN([DX_HTML_FEATURE], [AC_DEFUN([DX_FEATURE_html], [$1])])
+AC_DEFUN([DX_CHM_FEATURE], [AC_DEFUN([DX_FEATURE_chm], [$1])])
+AC_DEFUN([DX_CHI_FEATURE], [AC_DEFUN([DX_FEATURE_chi], [$1])])
+AC_DEFUN([DX_RTF_FEATURE], [AC_DEFUN([DX_FEATURE_rtf], [$1])])
+AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])])
+AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])])
+AC_DEFUN([DX_PDF_FEATURE], [AC_DEFUN([DX_FEATURE_pdf], [$1])])
+AC_DEFUN([DX_PS_FEATURE], [AC_DEFUN([DX_FEATURE_ps], [$1])])
+
+# DX_INIT_DOXYGEN(PROJECT, [CONFIG-FILE], [OUTPUT-DOC-DIR])
+# ---------------------------------------------------------
+# PROJECT also serves as the base name for the documentation files.
+# The default CONFIG-FILE is "Doxyfile" and OUTPUT-DOC-DIR is "doxygen-doc".
+AC_DEFUN([DX_INIT_DOXYGEN], [
+
+# Files:
+AC_SUBST([DX_PROJECT], [$1])
+AC_SUBST([DX_CONFIG], [ifelse([$2], [], Doxyfile, [$2])])
+AC_SUBST([DX_DOCDIR], [ifelse([$3], [], doxygen-doc, [$3])])
+
+# Environment variables used inside doxygen.cfg:
+DX_ENV_APPEND(SRCDIR, $srcdir)
+DX_ENV_APPEND(PROJECT, $DX_PROJECT)
+DX_ENV_APPEND(DOCDIR, $DX_DOCDIR)
+DX_ENV_APPEND(VERSION, $PACKAGE_VERSION)
+
+# Doxygen itself:
+DX_ARG_ABLE(doc, [generate any doxygen documentation],
+ [],
+ [],
+ [DX_REQUIRE_PROG([DX_DOXYGEN], doxygen)
+ DX_REQUIRE_PROG([DX_PERL], perl)],
+ [DX_ENV_APPEND(PERL_PATH, $DX_PERL)])
+
+# Dot for graphics:
+DX_ARG_ABLE(dot, [generate graphics for doxygen documentation],
+ [DX_CHECK_DEPEND(doc, 1)],
+ [DX_CLEAR_DEPEND(doc, 1)],
+ [DX_REQUIRE_PROG([DX_DOT], dot)],
+ [DX_ENV_APPEND(HAVE_DOT, YES)
+ DX_ENV_APPEND(DOT_PATH, [`DX_DIRNAME_EXPR($DX_DOT)`])],
+ [DX_ENV_APPEND(HAVE_DOT, NO)])
+
+# Man pages generation:
+DX_ARG_ABLE(man, [generate doxygen manual pages],
+ [DX_CHECK_DEPEND(doc, 1)],
+ [DX_CLEAR_DEPEND(doc, 1)],
+ [],
+ [DX_ENV_APPEND(GENERATE_MAN, YES)],
+ [DX_ENV_APPEND(GENERATE_MAN, NO)])
+
+# RTF file generation:
+DX_ARG_ABLE(rtf, [generate doxygen RTF documentation],
+ [DX_CHECK_DEPEND(doc, 1)],
+ [DX_CLEAR_DEPEND(doc, 1)],
+ [],
+ [DX_ENV_APPEND(GENERATE_RTF, YES)],
+ [DX_ENV_APPEND(GENERATE_RTF, NO)])
+
+# XML file generation:
+DX_ARG_ABLE(xml, [generate doxygen XML documentation],
+ [DX_CHECK_DEPEND(doc, 1)],
+ [DX_CLEAR_DEPEND(doc, 1)],
+ [],
+ [DX_ENV_APPEND(GENERATE_XML, YES)],
+ [DX_ENV_APPEND(GENERATE_XML, NO)])
+
+# (Compressed) HTML help generation:
+DX_ARG_ABLE(chm, [generate doxygen compressed HTML help documentation],
+ [DX_CHECK_DEPEND(doc, 1)],
+ [DX_CLEAR_DEPEND(doc, 1)],
+ [DX_REQUIRE_PROG([DX_HHC], hhc)],
+ [DX_ENV_APPEND(HHC_PATH, $DX_HHC)
+ DX_ENV_APPEND(GENERATE_HTML, YES)
+ DX_ENV_APPEND(GENERATE_HTMLHELP, YES)],
+ [DX_ENV_APPEND(GENERATE_HTMLHELP, NO)])
+
+# Seperate CHI file generation.
+DX_ARG_ABLE(chi, [generate doxygen seperate compressed HTML help index file],
+ [DX_CHECK_DEPEND(chm, 1)],
+ [DX_CLEAR_DEPEND(chm, 1)],
+ [],
+ [DX_ENV_APPEND(GENERATE_CHI, YES)],
+ [DX_ENV_APPEND(GENERATE_CHI, NO)])
+
+# Plain HTML pages generation:
+DX_ARG_ABLE(html, [generate doxygen plain HTML documentation],
+ [DX_CHECK_DEPEND(doc, 1) DX_CHECK_DEPEND(chm, 0)],
+ [DX_CLEAR_DEPEND(doc, 1) DX_CLEAR_DEPEND(chm, 0)],
+ [],
+ [DX_ENV_APPEND(GENERATE_HTML, YES)],
+ [DX_TEST_FEATURE(chm) || DX_ENV_APPEND(GENERATE_HTML, NO)])
+
+# PostScript file generation:
+DX_ARG_ABLE(ps, [generate doxygen PostScript documentation],
+ [DX_CHECK_DEPEND(doc, 1)],
+ [DX_CLEAR_DEPEND(doc, 1)],
+ [DX_REQUIRE_PROG([DX_LATEX], latex)
+ DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex)
+ DX_REQUIRE_PROG([DX_DVIPS], dvips)
+ DX_REQUIRE_PROG([DX_EGREP], egrep)])
+
+# PDF file generation:
+DX_ARG_ABLE(pdf, [generate doxygen PDF documentation],
+ [DX_CHECK_DEPEND(doc, 1)],
+ [DX_CLEAR_DEPEND(doc, 1)],
+ [DX_REQUIRE_PROG([DX_PDFLATEX], pdflatex)
+ DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex)
+ DX_REQUIRE_PROG([DX_EGREP], egrep)])
+
+# LaTeX generation for PS and/or PDF:
+AM_CONDITIONAL(DX_COND_latex, DX_TEST_FEATURE(ps) || DX_TEST_FEATURE(pdf))
+if DX_TEST_FEATURE(ps) || DX_TEST_FEATURE(pdf); then
+ DX_ENV_APPEND(GENERATE_LATEX, YES)
+else
+ DX_ENV_APPEND(GENERATE_LATEX, NO)
+fi
+
+# Paper size for PS and/or PDF:
+AC_ARG_VAR(DOXYGEN_PAPER_SIZE,
+ [a4wide (default), a4, letter, legal or executive])
+case "$DOXYGEN_PAPER_SIZE" in
+#(
+"")
+ AC_SUBST(DOXYGEN_PAPER_SIZE, "")
+;; #(
+a4wide|a4|letter|legal|executive)
+ DX_ENV_APPEND(PAPER_SIZE, $DOXYGEN_PAPER_SIZE)
+;; #(
+*)
+ AC_MSG_ERROR([unknown DOXYGEN_PAPER_SIZE='$DOXYGEN_PAPER_SIZE'])
+;;
+esac
+
+#For debugging:
+#echo DX_FLAG_doc=$DX_FLAG_doc
+#echo DX_FLAG_dot=$DX_FLAG_dot
+#echo DX_FLAG_man=$DX_FLAG_man
+#echo DX_FLAG_html=$DX_FLAG_html
+#echo DX_FLAG_chm=$DX_FLAG_chm
+#echo DX_FLAG_chi=$DX_FLAG_chi
+#echo DX_FLAG_rtf=$DX_FLAG_rtf
+#echo DX_FLAG_xml=$DX_FLAG_xml
+#echo DX_FLAG_pdf=$DX_FLAG_pdf
+#echo DX_FLAG_ps=$DX_FLAG_ps
+#echo DX_ENV=$DX_ENV
+])
diff --git a/ext/fputils/tests/Makefile.am b/ext/fputils/tests/Makefile.am
new file mode 100644
index 000000000..6faffead2
--- /dev/null
+++ b/ext/fputils/tests/Makefile.am
@@ -0,0 +1,13 @@
+
+TEST_LOG_DRIVER = env AM_TAP_AWK='$(AWK)' $(SHELL) \
+ $(top_srcdir)/tap-driver.sh
+
+LIBS=-lm $(top_builddir)/.libs/libfputils.la libtest.a
+
+FP80_TESTS=fp80_cvtd fp80_cvfd fp80_cvtf
+TESTS=$(FP80_TESTS)
+
+check_LIBRARIES=libtest.a
+check_PROGRAMS=$(FP80_TESTS)
+
+libtest_a_SOURCES=test_helper.c test_helper.h
diff --git a/ext/fputils/tests/fp80_cvfd.c b/ext/fputils/tests/fp80_cvfd.c
new file mode 100644
index 000000000..d4980287a
--- /dev/null
+++ b/ext/fputils/tests/fp80_cvfd.c
@@ -0,0 +1,120 @@
+/*
+ * Copyright (c) 2013, Andreas Sandberg
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <fputils/fp80.h>
+
+#include "test_helper.h"
+
+#include <assert.h>
+#include <math.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+static void
+test_cvfd_class(const char *name, double fin)
+{
+ test_diag("converting '%e' -> fp80...", fin);
+ fp80_t v = fp80_cvfd(fin);
+ int class_ok;
+ int fp64_class = fpclassify(fin);
+ int class = fp64_class == FP_SUBNORMAL ? FP_NORMAL : fp64_class;
+ int fp80_class = fp80_classify(v);
+
+ printf("# ");
+ fp80_debug_dump(stdout, v);
+ test_diag("isnan: %i, isinf: %i, iszero: %i, isnormal: %i, issubnormal: %i",
+ fp80_isnan(v), fp80_isinf(v), fp80_iszero(v),
+ fp80_isnormal(v), fp80_issubnormal(v));
+ test_diag("class(fp64): %i, expected class: %i, class(fp80): %i",
+ fp64_class, class, fp80_classify(v));
+ switch (class) {
+ case FP_NAN:
+ class_ok = fp80_isnan(v) && !fp80_isinf(v) && !fp80_iszero(v) &&
+ !fp80_isnormal(v) && !fp80_issubnormal(v);
+ break;
+
+ case FP_INFINITE:
+ class_ok = !fp80_isnan(v) && fp80_isinf(v) && !fp80_iszero(v) &&
+ !fp80_isnormal(v) && !fp80_issubnormal(v);
+ break;
+ case FP_ZERO:
+ class_ok = !fp80_isnan(v) && !fp80_isinf(v) && fp80_iszero(v) &&
+ !fp80_isnormal(v) && !fp80_issubnormal(v);
+ break;
+
+ case FP_SUBNORMAL:
+ class_ok = !fp80_isnan(v) && !fp80_isinf(v) && !fp80_iszero(v) &&
+ !fp80_isnormal(v) && fp80_issubnormal(v);
+ break;
+
+ case FP_NORMAL:
+ class_ok = !fp80_isnan(v) && !fp80_isinf(v) && !fp80_iszero(v) &&
+ fp80_isnormal(v) && !fp80_issubnormal(v);
+ break;
+
+ default:
+ test_bail("unexpected FP class (%i)", class);
+ }
+
+ if (!class_ok) {
+ test_diag("inconsistent classification");
+ test_fail(name);
+ } else if (fp80_class != class) {
+ test_diag("class mismatch");
+ test_fail(name);
+ } else {
+ test_ok(name);
+ }
+}
+
+static void
+test_cvfd_class_exp(const char *name, double x, int exp)
+{
+ double val = ldexp(x, exp);
+ test_cvfd_class(name, val);
+}
+
+int
+main(int argc, char *argv[])
+{
+ test_init(9);
+
+ test_cvfd_class("double->fp80 +inf", -INFINITY);
+ test_cvfd_class("double->fp80 -inf", INFINITY);
+ test_cvfd_class("double->fp80 +nan", NAN);
+ test_cvfd_class("double->fp80 -nan", -NAN);
+ test_cvfd_class("double->fp80 +0", 0);
+ test_cvfd_class("double->fp80 PI", M_PI);
+
+ test_cvfd_class_exp("double->fp80 smallest normal", 1.0, -1022);
+ test_cvfd_class_exp("double->fp80 denormal1", 0.5, -1022);
+ test_cvfd_class_exp("double->fp80 denormal2", 0.25, -1022);
+
+ test_exit();
+}
diff --git a/ext/fputils/tests/fp80_cvtd.c b/ext/fputils/tests/fp80_cvtd.c
new file mode 100644
index 000000000..425a5c44a
--- /dev/null
+++ b/ext/fputils/tests/fp80_cvtd.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2013, Andreas Sandberg
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <fputils/fp80.h>
+
+#include "test_helper.h"
+
+#include <math.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+static void
+test_fp80_cvtd_class(const char *name, fp80_t fin, int class)
+{
+ double d = fp80_cvtd(fin);
+ if (fpclassify(d) != class) {
+ test_diag("wrong class");
+ test_fail(name);
+ } else {
+ test_ok(name);
+ }
+}
+
+static void
+test_fp80_cvtd_inf(const char *name, fp80_t fin, int inf_class)
+{
+ double d = fp80_cvtd(fin);
+ if (isinf(d) != inf_class) {
+ test_diag("wrong infinity type");
+ test_fail(name);
+ } else {
+ test_ok(name);
+ }
+}
+
+int
+main(int argc, char *argv[])
+{
+ test_init(6);
+
+ test_fp80_cvtd_inf("fp80->double +inf", fp80_pinf, 1);
+ test_fp80_cvtd_inf("fp80->double -inf", fp80_ninf, -1);
+ test_fp80_cvtd_class("fp80->double qnan", fp80_qnan, FP_NAN);
+ test_fp80_cvtd_class("fp80->double qnani", fp80_qnani, FP_NAN);
+ test_fp80_cvtd_class("fp80->double snan", fp80_snan, FP_NAN);
+ test_fp80_cvtd_class("fp80->double nan", fp80_nan, FP_NAN);
+
+ test_exit();
+}
diff --git a/ext/fputils/tests/fp80_cvtf.c b/ext/fputils/tests/fp80_cvtf.c
new file mode 100644
index 000000000..0edfb2ded
--- /dev/null
+++ b/ext/fputils/tests/fp80_cvtf.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2013, Andreas Sandberg
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <fputils/fp80.h>
+
+#include "test_helper.h"
+
+#include <assert.h>
+#include <math.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+static void
+test_cvtf(const char *name, double fin)
+{
+ fp80_t v80 = fp80_cvfd(fin);
+ double v64 = fp80_cvtd(v80);
+
+ test_diag("Conversion '%e' -> fp80 -> double: %e", fin, v64);
+
+ printf("# ");
+ fp80_debug_dump(stdout, v80);
+ if (v64 == fin ||
+ (isnan(fin) && isnan(v64) && signbit(fin) == signbit(v64))) {
+ test_ok(name);
+ } else {
+ test_diag("MISMATCH: %e != %e", fin, v64);
+ test_fail(name);
+ }
+}
+
+static void
+test_cvtf_exp(const char *name, double x, int exp)
+{
+ double val = ldexp(x, exp);
+ test_cvtf(name, val);
+}
+
+int
+main(int argc, char *argv[])
+{
+ test_init(9);
+
+ test_cvtf("+inf", -INFINITY);
+ test_cvtf("-inf", INFINITY);
+ test_cvtf("+nan", NAN);
+ test_cvtf("-nan", -NAN);
+ test_cvtf("+0", 0);
+ test_cvtf("PI", M_PI);
+
+ test_cvtf_exp("smallest normal", 1.0, -1022);
+ test_cvtf_exp("denormal1", 0.5, -1022);
+ test_cvtf_exp("denormal2", 0.25, -1022);
+
+ test_exit();
+}
diff --git a/ext/fputils/tests/test_helper.c b/ext/fputils/tests/test_helper.c
new file mode 100644
index 000000000..f2da28a04
--- /dev/null
+++ b/ext/fputils/tests/test_helper.c
@@ -0,0 +1,157 @@
+/*
+ * Copyright (c) 2013, Andreas Sandberg
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "test_helper.h"
+
+#include <assert.h>
+#include <stdarg.h>
+#include <stdlib.h>
+
+unsigned test_current = 0;
+unsigned test_count = 0;
+unsigned test_fail_count = 0;
+
+void
+test_init(unsigned no_tests)
+{
+ assert(test_count == 0 && test_current == 0);
+
+ test_count = no_tests;
+ test_current = 1;
+ test_fail_count = 0;
+
+ printf("1..%u\n", no_tests);
+}
+
+void
+test_exit()
+{
+ if (test_fail_count)
+ exit(EXIT_FAILURE);
+ else
+ exit(EXIT_SUCCESS);
+}
+
+void
+test_bail(const char *fmt, ...)
+{
+ va_list ap;
+ va_start(ap, fmt);
+
+ printf("Bail out! ");
+ vprintf(fmt, ap);
+ printf("\n");
+
+ va_end(ap);
+
+ exit(EXIT_FAILURE);
+}
+
+void
+test_diag(const char *fmt, ...)
+{
+ va_list ap;
+ va_start(ap, fmt);
+
+ printf("# ");
+ vprintf(fmt, ap);
+ printf("\n");
+
+ va_end(ap);
+}
+
+static void
+test_vstatus(const char *status, const char *test,
+ const char *directive,
+ const char *fmt_why, va_list ap)
+{
+ printf("%s %i", status, test_current);
+
+ if (test && test[0] != '\0')
+ printf(" - %s", test);
+
+ if (directive && directive[0] != '\0') {
+ printf(" # %s ", directive);
+ if (fmt_why && fmt_why[0] != '\0')
+ vprintf(fmt_why, ap);
+ }
+ printf("\n");
+
+ ++test_current;
+}
+
+static void __attribute__((format (printf, 4, 5)))
+test_status(const char *status, const char *test,
+ const char *directive,
+ const char *fmt_why, ...)
+{
+ va_list ap;
+ va_start(ap, fmt_why);
+
+ test_vstatus(status, test, directive, fmt_why, ap);
+
+ va_end(ap);
+}
+
+void
+test_ok(const char *test)
+{
+ test_status("ok", test, NULL, NULL);
+}
+
+void
+test_fail(const char *test)
+{
+ test_status("not ok", test, NULL, NULL);
+ ++test_fail_count;
+}
+
+void
+test_skip(const char *test, const char *fmt_why, ...)
+{
+ va_list ap;
+ va_start(ap, fmt_why);
+
+ test_vstatus("ok", test, "SKIP", fmt_why, ap);
+
+ va_end(ap);
+}
+
+void
+test_todo(const char *test, const char *fmt_why, ...)
+{
+ va_list ap;
+ va_start(ap, fmt_why);
+
+ test_vstatus("not ok", test, "TODO", fmt_why, ap);
+
+ va_end(ap);
+
+ ++test_fail_count;
+}
diff --git a/ext/fputils/tests/test_helper.h b/ext/fputils/tests/test_helper.h
new file mode 100644
index 000000000..1b090189a
--- /dev/null
+++ b/ext/fputils/tests/test_helper.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2013, Andreas Sandberg
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _TEST_HELPER
+#define _TEST_HELPER 1
+
+#include <stdio.h>
+
+extern unsigned test_current;
+extern unsigned test_count;
+extern unsigned test_fail_count;
+
+void test_init(unsigned no_tests);
+void test_exit()
+ __attribute__((noreturn));
+
+void test_bail(const char *fmt, ...)
+ __attribute__((format (printf, 1, 2), noreturn));
+
+void test_diag(const char *fmt, ...)
+ __attribute__((format (printf, 1, 2)));
+
+void test_ok(const char *test);
+
+void test_fail(const char *test);
+
+void test_skip(const char *test, const char *fmt_why, ...)
+ __attribute__((format (printf, 2, 3)));
+
+void test_todo(const char *test, const char *fmt_why, ...)
+ __attribute__((format (printf, 2, 3)));
+
+#endif