diff options
Diffstat (limited to 'src/arch/mips/linux/system.cc')
| -rw-r--r-- | src/arch/mips/linux/system.cc | 198 |
1 files changed, 198 insertions, 0 deletions
diff --git a/src/arch/mips/linux/system.cc b/src/arch/mips/linux/system.cc new file mode 100644 index 000000000..b8cc4b295 --- /dev/null +++ b/src/arch/mips/linux/system.cc @@ -0,0 +1,198 @@ +/* + * Copyright (c) 2007 MIPS Technologies, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer; + * redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution; + * neither the name of the copyright holders nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Authors: Ali Saidi + * Lisa Hsu + * Nathan Binkert + * Steve Reinhardt + */ + +/** + * @file + * This code loads the linux kernel, console, pal and patches certain + * functions. The symbol tables are loaded so that traces can show + * the executing function and we can skip functions. Various delay + * loops are skipped and their final values manually computed to speed + * up boot time. + */ + +#include "arch/vtophys.hh" +#include "arch/mips/idle_event.hh" +#include "arch/mips/linux/system.hh" +#include "arch/mips/linux/threadinfo.hh" +#include "arch/mips/system.hh" +#include "base/loader/symtab.hh" +#include "cpu/thread_context.hh" +#include "cpu/base.hh" +#include "dev/platform.hh" +#include "kern/linux/printk.hh" +#include "kern/linux/events.hh" +#include "mem/physical.hh" +#include "mem/port.hh" +#include "sim/arguments.hh" +#include "sim/byteswap.hh" + +using namespace std; +using namespace MipsISA; +using namespace Linux; + +LinuxMipsSystem::LinuxMipsSystem(Params *p) + : MipsSystem(p) +{ + Addr addr = 0; + + /** + * The symbol swapper_pg_dir marks the beginning of the kernel and + * the location of bootloader passed arguments + */ + if (!kernelSymtab->findAddress("swapper_pg_dir", KernelStart)) { + panic("Could not determine start location of kernel"); + } + + /** + * Since we aren't using a bootloader, we have to copy the + * kernel arguments directly into the kernel's memory. + */ + virtPort.writeBlob(CommandLine(), (uint8_t*)params()->boot_osflags.c_str(), + params()->boot_osflags.length()+1); + + /** + * find the address of the est_cycle_freq variable and insert it + * so we don't through the lengthly process of trying to + * calculated it by using the PIT, RTC, etc. + */ + if (kernelSymtab->findAddress("est_cycle_freq", addr)) + virtPort.write(addr, (uint64_t)(Clock::Frequency / + p->boot_cpu_frequency)); + + + /** + * EV5 only supports 127 ASNs so we are going to tell the kernel that the + * paritiuclar EV6 we have only supports 127 asns. + * @todo At some point we should change ev5.hh and the palcode to support + * 255 ASNs. + */ + if (kernelSymtab->findAddress("dp264_mv", addr)) + virtPort.write(addr + 0x18, LittleEndianGuest::htog((uint32_t)127)); + else + panic("could not find dp264_mv\n"); + +#ifndef NDEBUG + kernelPanicEvent = addKernelFuncEvent<BreakPCEvent>("panic"); + if (!kernelPanicEvent) + panic("could not find kernel symbol \'panic\'"); + +#if 0 + kernelDieEvent = addKernelFuncEvent<BreakPCEvent>("die_if_kernel"); + if (!kernelDieEvent) + panic("could not find kernel symbol \'die_if_kernel\'"); +#endif + +#endif + + /** + * Any time ide_delay_50ms, calibarte_delay or + * determine_cpu_caches is called just skip the + * function. Currently determine_cpu_caches only is used put + * information in proc, however if that changes in the future we + * will have to fill in the cache size variables appropriately. + */ + + skipIdeDelay50msEvent = + addKernelFuncEvent<SkipFuncEvent>("ide_delay_50ms"); + skipDelayLoopEvent = + addKernelFuncEvent<SkipDelayLoopEvent>("calibrate_delay"); + skipCacheProbeEvent = + addKernelFuncEvent<SkipFuncEvent>("determine_cpu_caches"); + debugPrintkEvent = addKernelFuncEvent<DebugPrintkEvent>("dprintk"); + idleStartEvent = addKernelFuncEvent<IdleStartEvent>("cpu_idle"); + + // Disable for now as it runs into panic() calls in VPTr methods + // (see sim/vptr.hh). Once those bugs are fixed, we can + // re-enable, but we should find a better way to turn it on than + // using DTRACE(Thread), since looking at a trace flag at tick 0 + // leads to non-intuitive behavior with --trace-start. + if (false && kernelSymtab->findAddress("mips_switch_to", addr)) { + printThreadEvent = new PrintThreadInfo(&pcEventQueue, "threadinfo", + addr + sizeof(MachInst) * 6); + } else { + printThreadEvent = NULL; + } +} + +LinuxMipsSystem::~LinuxMipsSystem() +{ +#ifndef NDEBUG + delete kernelPanicEvent; +#endif + delete skipIdeDelay50msEvent; + delete skipDelayLoopEvent; + delete skipCacheProbeEvent; + delete debugPrintkEvent; + delete idleStartEvent; + delete printThreadEvent; +} + + +void +LinuxMipsSystem::setDelayLoop(ThreadContext *tc) +{ + Addr addr = 0; + if (kernelSymtab->findAddress("loops_per_jiffy", addr)) { + Tick cpuFreq = tc->getCpuPtr()->frequency(); + Tick intrFreq = platform->intrFrequency(); + VirtualPort *vp; + + vp = tc->getVirtPort(); + vp->writeHtoG(addr, (uint32_t)((cpuFreq / intrFreq) * 0.9988)); + tc->delVirtPort(vp); + } +} + + +void +LinuxMipsSystem::SkipDelayLoopEvent::process(ThreadContext *tc) +{ + SkipFuncEvent::process(tc); + // calculate and set loops_per_jiffy + ((LinuxMipsSystem *)tc->getSystemPtr())->setDelayLoop(tc); +} + +void +LinuxMipsSystem::PrintThreadInfo::process(ThreadContext *tc) +{ + Linux::ThreadInfo ti(tc); + + DPRINTF(Thread, "Currently Executing Thread %s, pid %d, started at: %d\n", + ti.curTaskName(), ti.curTaskPID(), ti.curTaskStart()); +} + +LinuxMipsSystem * +LinuxMipsSystemParams::create() +{ + return new LinuxMipsSystem(this); +} |