diff options
Diffstat (limited to 'src/base/vnc/vncinput.hh')
-rw-r--r-- | src/base/vnc/vncinput.hh | 250 |
1 files changed, 250 insertions, 0 deletions
diff --git a/src/base/vnc/vncinput.hh b/src/base/vnc/vncinput.hh new file mode 100644 index 000000000..1686e3f25 --- /dev/null +++ b/src/base/vnc/vncinput.hh @@ -0,0 +1,250 @@ +/* + * Copyright (c) 2010 ARM Limited + * All rights reserved + * + * The license below extends only to copyright in the software and shall + * not be construed as granting a license to any other intellectual + * property including but not limited to intellectual property relating + * to a hardware implementation of the functionality of the software + * licensed hereunder. You may use the software subject to the license + * terms below provided that you ensure that this notice is replicated + * unmodified and in its entirety in all distributions of the software, + * modified or unmodified, in source code or in binary form. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer; + * redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution; + * neither the name of the copyright holders nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Authors: Ali Saidi + * William Wang + */ + +/** @file + * Declaration of a VNC input + */ + +#ifndef __BASE_VNC_VNC_INPUT_HH__ +#define __BASE_VNC_VNC_INPUT_HH__ + +#include <iostream> + +#include "base/vnc/convert.hh" +#include "base/bitmap.hh" +#include "params/VncInput.hh" +#include "sim/sim_object.hh" + +/** + * A device that expects to receive input from the vnc server should derrive + * (through mulitple inheritence if necessary from VncKeyboard or VncMouse + * and call setKeyboard() or setMouse() respectively on the vnc server. + */ +class VncKeyboard +{ + public: + /** + * Called when the vnc server receives a key press event from the + * client. + * @param key the key passed is an x11 keysym + * @param down is the key now down or up? + */ + virtual void keyPress(uint32_t key, bool down) = 0; +}; + +class VncMouse +{ + public: + /** + * called whenever the mouse moves or it's button state changes + * buttons is a simple mask with each button (0-8) corresponding to + * a bit position in the byte with 1 being down and 0 being up + * @param x the x position of the mouse + * @param y the y position of the mouse + * @param buttos the button state as described above + */ + virtual void mouseAt(uint16_t x, uint16_t y, uint8_t buttons) = 0; +}; + +class VncInput : public SimObject +{ + public: + + /** Client -> Server message IDs */ + enum ClientMessages { + ClientSetPixelFormat = 0, + ClientSetEncodings = 2, + ClientFrameBufferUpdate = 3, + ClientKeyEvent = 4, + ClientPointerEvent = 5, + ClientCutText = 6 + }; + + struct PixelFormat { + uint8_t bpp; + uint8_t depth; + uint8_t bigendian; + uint8_t truecolor; + uint16_t redmax; + uint16_t greenmax; + uint16_t bluemax; + uint8_t redshift; + uint8_t greenshift; + uint8_t blueshift; + uint8_t padding[3]; + } M5_ATTR_PACKED; + + struct PixelFormatMessage { + uint8_t type; + uint8_t padding[3]; + PixelFormat px; + } M5_ATTR_PACKED; + + struct PixelEncodingsMessage { + uint8_t type; + uint8_t padding; + uint16_t num_encodings; + } M5_ATTR_PACKED; + + struct FrameBufferUpdateReq { + uint8_t type; + uint8_t incremental; + uint16_t x; + uint16_t y; + uint16_t width; + uint16_t height; + } M5_ATTR_PACKED; + + struct KeyEventMessage { + uint8_t type; + uint8_t down_flag; + uint8_t padding[2]; + uint32_t key; + } M5_ATTR_PACKED; + + struct PointerEventMessage { + uint8_t type; + uint8_t button_mask; + uint16_t x; + uint16_t y; + } M5_ATTR_PACKED; + + struct ClientCutTextMessage { + uint8_t type; + uint8_t padding[3]; + uint32_t length; + } M5_ATTR_PACKED; + + typedef VncInputParams Params; + VncInput(const Params *p); + + /** Set the address of the frame buffer we are going to show. + * To avoid copying, just have the display controller + * tell us where the data is instead of constanly copying it around + * @param rfb frame buffer that we're going to use + */ + void + setFramebufferAddr(uint8_t* rfb) + { + fbPtr = rfb; + } + + /** Set up the device that would like to receive notifications when keys are + * pressed in the vnc client keyboard + * @param _keyboard an object that derrives from VncKeyboard + */ + void setKeyboard(VncKeyboard *_keyboard) { keyboard = _keyboard; } + + /** Setup the device that would like to receive notifications when mouse + * movements or button presses are received from the vnc client. + * @param _mouse an object that derrives from VncMouse + */ + void setMouse(VncMouse *_mouse) { mouse = _mouse; } + + /** What is the width of the screen we're displaying. + * This is used for pointer/tablet devices that need to know to calculate + * the correct value to send to the device driver. + * @return the width of the simulated screen + */ + uint16_t videoWidth() const { return _videoWidth; } + + /** What is the height of the screen we're displaying. + * This is used for pointer/tablet devices that need to know to calculate + * the correct value to send to the device driver. + * @return the height of the simulated screen + */ + uint16_t videoHeight() const { return _videoHeight; } + + /** The frame buffer uses this call to notify the vnc server that + * the frame buffer has been updated and a new image needs to be sent to the + * client + */ + virtual void setDirty() + { + if (captureEnabled) + captureFrameBuffer(); + } + + /** Set the mode of the data the frame buffer will be sending us + * @param mode the mode + */ + virtual void setFrameBufferParams(VideoConvert::Mode mode, uint16_t width, uint16_t height); + + protected: + /** The device to notify when we get key events */ + VncKeyboard *keyboard; + + /** The device to notify when we get mouse events */ + VncMouse *mouse; + + /** The video converter that transforms data for us */ + VideoConvert *vc; + + /** pointer to the actual data that is stored in the frame buffer device */ + uint8_t* fbPtr; + + /** The mode of data we're getting frame buffer in */ + VideoConvert::Mode videoMode; + + /** the width of the frame buffer we are sending to the client */ + uint16_t _videoWidth; + + /** the height of the frame buffer we are sending to the client */ + uint16_t _videoHeight; + + /** Flag indicating whether to capture snapshots of frame buffer or not */ + bool captureEnabled; + + /** Current frame number being captured to a file */ + int captureCurrentFrame; + + /** Directory to store captured frames to */ + std::string captureOutputDirectory; + + /** Computed hash of the last captured frame */ + uint64_t captureLastHash; + + /** Cached bitmap object for writing out frame buffers to file */ + Bitmap *captureBitmap; + + /** Captures the current frame buffer to a file */ + void captureFrameBuffer(); +}; +#endif |