diff options
Diffstat (limited to 'src/dev/Ethernet.py')
| -rw-r--r-- | src/dev/Ethernet.py | 199 |
1 files changed, 199 insertions, 0 deletions
diff --git a/src/dev/Ethernet.py b/src/dev/Ethernet.py new file mode 100644 index 000000000..e81862a96 --- /dev/null +++ b/src/dev/Ethernet.py @@ -0,0 +1,199 @@ +# Copyright (c) 2005-2007 The Regents of The University of Michigan +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer; +# redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution; +# neither the name of the copyright holders nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# Authors: Nathan Binkert + +from m5.SimObject import SimObject +from m5.params import * +from m5.proxy import * +from Pci import PciDevice, PciConfigData + +class EtherInt(SimObject): + type = 'EtherInt' + abstract = True + peer = Param.EtherInt(NULL, "peer interface") + +class EtherLink(SimObject): + type = 'EtherLink' + int1 = Param.EtherInt("interface 1") + int2 = Param.EtherInt("interface 2") + delay = Param.Latency('0us', "packet transmit delay") + delay_var = Param.Latency('0ns', "packet transmit delay variability") + speed = Param.NetworkBandwidth('1Gbps', "link speed") + dump = Param.EtherDump(NULL, "dump object") + +class EtherBus(SimObject): + type = 'EtherBus' + loopback = Param.Bool(True, "send packet back to the sending interface") + dump = Param.EtherDump(NULL, "dump object") + speed = Param.NetworkBandwidth('100Mbps', "bus speed in bits per second") + +class EtherTap(EtherInt): + type = 'EtherTap' + bufsz = Param.Int(10000, "tap buffer size") + dump = Param.EtherDump(NULL, "dump object") + port = Param.UInt16(3500, "tap port") + +class EtherDump(SimObject): + type = 'EtherDump' + file = Param.String("dump file") + maxlen = Param.Int(96, "max portion of packet data to dump") + +class IGbE(PciDevice): + type = 'IGbE' + hardware_address = Param.String("Ethernet Hardware Address") + use_flow_control = Param.Bool(False, + "Should we use xon/xoff flow contorl (UNIMPLEMENTD)") + rx_fifo_size = Param.MemorySize('384kB', "Size of the rx FIFO") + tx_fifo_size = Param.MemorySize('384kB', "Size of the tx FIFO") + rx_desc_cache_size = Param.Int(64, + "Number of enteries in the rx descriptor cache") + tx_desc_cache_size = Param.Int(64, + "Number of enteries in the rx descriptor cache") + clock = Param.Clock('500MHz', "Clock speed of the device") + +class IGbEPciData(PciConfigData): + VendorID = 0x8086 + DeviceID = 0x1075 + SubsystemID = 0x1008 + SubsystemVendorID = 0x8086 + Status = 0x0000 + SubClassCode = 0x00 + ClassCode = 0x02 + ProgIF = 0x00 + BAR0 = 0x00000000 + BAR1 = 0x00000000 + BAR2 = 0x00000000 + BAR3 = 0x00000000 + BAR4 = 0x00000000 + BAR5 = 0x00000000 + MaximumLatency = 0x00 + MinimumGrant = 0xff + InterruptLine = 0x1e + InterruptPin = 0x01 + BAR0Size = '128kB' + +class IGbEInt(EtherInt): + type = 'IGbEInt' + device = Param.IGbE("Ethernet device of this interface") + + + +class EtherDevBase(PciDevice): + hardware_address = Param.EthernetAddr(NextEthernetAddr, + "Ethernet Hardware Address") + + clock = Param.Clock('0ns', "State machine processor frequency") + + dma_read_delay = Param.Latency('0us', "fixed delay for dma reads") + dma_read_factor = Param.Latency('0us', "multiplier for dma reads") + dma_write_delay = Param.Latency('0us', "fixed delay for dma writes") + dma_write_factor = Param.Latency('0us', "multiplier for dma writes") + + rx_delay = Param.Latency('1us', "Receive Delay") + tx_delay = Param.Latency('1us', "Transmit Delay") + rx_fifo_size = Param.MemorySize('512kB', "max size of rx fifo") + tx_fifo_size = Param.MemorySize('512kB', "max size of tx fifo") + + rx_filter = Param.Bool(True, "Enable Receive Filter") + intr_delay = Param.Latency('10us', "Interrupt propagation delay") + rx_thread = Param.Bool(False, "dedicated kernel thread for transmit") + tx_thread = Param.Bool(False, "dedicated kernel threads for receive") + rss = Param.Bool(False, "Receive Side Scaling") + +class NSGigEPciData(PciConfigData): + VendorID = 0x100B + DeviceID = 0x0022 + Status = 0x0290 + SubClassCode = 0x00 + ClassCode = 0x02 + ProgIF = 0x00 + BAR0 = 0x00000001 + BAR1 = 0x00000000 + BAR2 = 0x00000000 + BAR3 = 0x00000000 + BAR4 = 0x00000000 + BAR5 = 0x00000000 + MaximumLatency = 0x34 + MinimumGrant = 0xb0 + InterruptLine = 0x1e + InterruptPin = 0x01 + BAR0Size = '256B' + BAR1Size = '4kB' + +class NSGigE(EtherDevBase): + type = 'NSGigE' + + dma_data_free = Param.Bool(False, "DMA of Data is free") + dma_desc_free = Param.Bool(False, "DMA of Descriptors is free") + dma_no_allocate = Param.Bool(True, "Should we allocate cache on read") + + configdata = NSGigEPciData() + + +class NSGigEInt(EtherInt): + type = 'NSGigEInt' + device = Param.NSGigE("Ethernet device of this interface") + +class SinicPciData(PciConfigData): + VendorID = 0x1291 + DeviceID = 0x1293 + Status = 0x0290 + SubClassCode = 0x00 + ClassCode = 0x02 + ProgIF = 0x00 + BAR0 = 0x00000000 + BAR1 = 0x00000000 + BAR2 = 0x00000000 + BAR3 = 0x00000000 + BAR4 = 0x00000000 + BAR5 = 0x00000000 + MaximumLatency = 0x34 + MinimumGrant = 0xb0 + InterruptLine = 0x1e + InterruptPin = 0x01 + BAR0Size = '64kB' + +class Sinic(EtherDevBase): + type = 'Sinic' + + rx_max_copy = Param.MemorySize('1514B', "rx max copy") + tx_max_copy = Param.MemorySize('16kB', "tx max copy") + rx_max_intr = Param.UInt32(10, "max rx packets per interrupt") + rx_fifo_threshold = Param.MemorySize('384kB', "rx fifo high threshold") + rx_fifo_low_mark = Param.MemorySize('128kB', "rx fifo low threshold") + tx_fifo_high_mark = Param.MemorySize('384kB', "tx fifo high threshold") + tx_fifo_threshold = Param.MemorySize('128kB', "tx fifo low threshold") + virtual_count = Param.UInt32(1, "Virtualized SINIC") + zero_copy = Param.Bool(False, "Zero copy receive") + delay_copy = Param.Bool(False, "Delayed copy transmit") + virtual_addr = Param.Bool(False, "Virtual addressing") + + configdata = SinicPciData() + +class SinicInt(EtherInt): + type = 'SinicInt' + device = Param.Sinic("Ethernet device of this interface") |