summaryrefslogtreecommitdiff
path: root/src/dev/arm/RealView.py
diff options
context:
space:
mode:
Diffstat (limited to 'src/dev/arm/RealView.py')
-rw-r--r--src/dev/arm/RealView.py169
1 files changed, 149 insertions, 20 deletions
diff --git a/src/dev/arm/RealView.py b/src/dev/arm/RealView.py
index 1c4fa0f56..13ab50b70 100644
--- a/src/dev/arm/RealView.py
+++ b/src/dev/arm/RealView.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2009-2013 ARM Limited
+# Copyright (c) 2009-2014 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
@@ -44,7 +44,7 @@ from m5.params import *
from m5.proxy import *
from Device import BasicPioDevice, PioDevice, IsaFake, BadAddr, DmaDevice
from Pci import PciConfigAll
-from Ethernet import NSGigE, IGbE_e1000, IGbE_igb
+from Ethernet import NSGigE, IGbE_igb, IGbE_e1000
from Ide import *
from Platform import Platform
from Terminal import Terminal
@@ -184,6 +184,18 @@ class RealView(Platform):
mem_start_addr = Param.Addr(0, "Start address of main memory")
max_mem_size = Param.Addr('256MB', "Maximum amount of RAM supported by platform")
+ def attachPciDevices(self):
+ pass
+
+ def enableMSIX(self):
+ pass
+
+ def onChipIOClkDomain(self, clkdomain):
+ pass
+
+ def offChipIOClkDomain(self, clkdomain):
+ pass
+
def setupBootLoader(self, mem_bus, cur_sys, loc):
self.nvmem = SimpleMemory(range = AddrRange('2GB', size = '64MB'),
conf_table_reported = False)
@@ -250,6 +262,14 @@ class RealViewPBX(RealView):
self.flash_fake.pio_addr + \
self.flash_fake.pio_size - 1)]
+ # Set the clock domain for IO objects that are considered
+ # to be "close" to the cores.
+ def onChipIOClkDomain(self, clkdomain):
+ self.gic.clk_domain = clkdomain
+ self.l2x0_fake.clk_domain = clkdomain
+ self.a9scu.clkdomain = clkdomain
+ self.local_cpu_timer.clk_domain = clkdomain
+
# Attach I/O devices to specified bus object. Can't do this
# earlier, since the bus object itself is typically defined at the
# System level.
@@ -282,12 +302,40 @@ class RealViewPBX(RealView):
self.rtc.pio = bus.master
self.flash_fake.pio = bus.master
+ # Set the clock domain for IO objects that are considered
+ # to be "far" away from the cores.
+ def offChipIOClkDomain(self, clkdomain):
+ self.uart.clk_domain = clkdomain
+ self.realview_io.clk_domain = clkdomain
+ self.timer0.clk_domain = clkdomain
+ self.timer1.clk_domain = clkdomain
+ self.clcd.clk_domain = clkdomain
+ self.kmi0.clk_domain = clkdomain
+ self.kmi1.clk_domain = clkdomain
+ self.cf_ctrl.clk_domain = clkdomain
+ self.dmac_fake.clk_domain = clkdomain
+ self.uart1_fake.clk_domain = clkdomain
+ self.uart2_fake.clk_domain = clkdomain
+ self.uart3_fake.clk_domain = clkdomain
+ self.smc_fake.clk_domain = clkdomain
+ self.sp810_fake.clk_domain = clkdomain
+ self.watchdog_fake.clk_domain = clkdomain
+ self.gpio0_fake.clk_domain = clkdomain
+ self.gpio1_fake.clk_domain = clkdomain
+ self.gpio2_fake.clk_domain = clkdomain
+ self.ssp_fake.clk_domain = clkdomain
+ self.sci_fake.clk_domain = clkdomain
+ self.aaci_fake.clk_domain = clkdomain
+ self.mmc_fake.clk_domain = clkdomain
+ self.rtc.clk_domain = clkdomain
+ self.flash_fake.clk_domain = clkdomain
+
# Reference for memory map and interrupt number
# RealView Emulation Baseboard User Guide (ARM DUI 0143B)
# Chapter 4: Programmer's Reference
class RealViewEB(RealView):
uart = Pl011(pio_addr=0x10009000, int_num=44)
- realview_io = RealViewCtrl(pio_addr=0x10000000)
+ realview_io = RealViewCtrl(pio_addr=0x10000000, idreg=0x01400500)
gic = Pl390(dist_addr=0x10041000, cpu_addr=0x10040000)
timer0 = Sp804(int_num0=36, int_num1=36, pio_addr=0x10011000)
timer1 = Sp804(int_num0=37, int_num1=37, pio_addr=0x10012000)
@@ -328,6 +376,12 @@ class RealViewEB(RealView):
self.gic.cpu_addr - 1),
AddrRange(self.flash_fake.pio_addr, Addr.max)]
+ # Set the clock domain for IO objects that are considered
+ # to be "close" to the cores.
+ def onChipIOClkDomain(self, clkdomain):
+ self.gic.clk_domain = clkdomain
+ self.l2x0_fake.clk_domain = clkdomain
+
# Attach I/O devices to specified bus object. Can't do this
# earlier, since the bus object itself is typically defined at the
# System level.
@@ -358,12 +412,41 @@ class RealViewEB(RealView):
self.flash_fake.pio = bus.master
self.smcreg_fake.pio = bus.master
+ # Set the clock domain for IO objects that are considered
+ # to be "far" away from the cores.
+ def offChipIOClkDomain(self, clkdomain):
+ self.uart.clk_domain = clkdomain
+ self.realview_io.clk_domain = clkdomain
+ self.timer0.clk_domain = clkdomain
+ self.timer1.clk_domain = clkdomain
+ self.clcd.clk_domain = clkdomain
+ self.kmi0.clk_domain = clkdomain
+ self.kmi1.clk_domain = clkdomain
+ self.dmac_fake.clk_domain = clkdomain
+ self.uart1_fake.clk_domain = clkdomain
+ self.uart2_fake.clk_domain = clkdomain
+ self.uart3_fake.clk_domain = clkdomain
+ self.smc_fake.clk_domain = clkdomain
+ self.sp810_fake.clk_domain = clkdomain
+ self.watchdog_fake.clk_domain = clkdomain
+ self.gpio0_fake.clk_domain = clkdomain
+ self.gpio1_fake.clk_domain = clkdomain
+ self.gpio2_fake.clk_domain = clkdomain
+ self.ssp_fake.clk_domain = clkdomain
+ self.sci_fake.clk_domain = clkdomain
+ self.aaci_fake.clk_domain = clkdomain
+ self.mmc_fake.clk_domain = clkdomain
+ self.rtc.clk_domain = clkdomain
+ self.flash_fake.clk_domain = clkdomain
+ self.smcreg_fake.clk_domain = clkdomain
+
class VExpress_EMM(RealView):
mem_start_addr = '2GB'
max_mem_size = '2GB'
pci_cfg_base = 0x30000000
uart = Pl011(pio_addr=0x1c090000, int_num=37)
- realview_io = RealViewCtrl(proc_id0=0x14000000, proc_id1=0x14000000, pio_addr=0x1C010000)
+ realview_io = RealViewCtrl(proc_id0=0x14000000, proc_id1=0x14000000, \
+ idreg=0x02250000, pio_addr=0x1C010000)
gic = Pl390(dist_addr=0x2C001000, cpu_addr=0x2C002000)
local_cpu_timer = CpuLocalTimer(int_num_timer=29, int_num_watchdog=30, pio_addr=0x2C080000)
generic_timer = GenericTimer(int_num=29)
@@ -381,13 +464,6 @@ class VExpress_EMM(RealView):
BAR0LegacyIO = True, BAR1LegacyIO = True)
pciconfig = PciConfigAll(size='256MB')
- ethernet = IGbE_e1000(pci_bus=0, pci_dev=0, pci_func=0,
- InterruptLine=1, InterruptPin=1)
-
- ide = IdeController(disks = [], pci_bus=0, pci_dev=1, pci_func=0,
- InterruptLine=2, InterruptPin=2)
-
-
vram = SimpleMemory(range = AddrRange(0x18000000, size='32MB'),
conf_table_reported = False)
rtc = PL031(pio_addr=0x1C170000, int_num=36)
@@ -403,6 +479,18 @@ class VExpress_EMM(RealView):
usb_fake = IsaFake(pio_addr=0x1B000000, pio_size=0x1ffff)
mmc_fake = AmbaFake(pio_addr=0x1c050000)
+ # Attach any PCI devices that are supported
+ def attachPciDevices(self):
+ self.ethernet = IGbE_e1000(pci_bus=0, pci_dev=0, pci_func=0,
+ InterruptLine=1, InterruptPin=1)
+ self.ide = IdeController(disks = [], pci_bus=0, pci_dev=1, pci_func=0,
+ InterruptLine=2, InterruptPin=2)
+
+ def enableMSIX(self):
+ self.gic = Pl390(dist_addr=0x2C001000, cpu_addr=0x2C002000, it_lines=512)
+ self.gicv2m = Gicv2m()
+ self.gicv2m.frames = [Gicv2mFrame(spi_base=256, spi_len=64, addr=0x2C1C0000)]
+
def setupBootLoader(self, mem_bus, cur_sys, loc):
self.nvmem = SimpleMemory(range = AddrRange('64MB'),
conf_table_reported = False)
@@ -417,6 +505,8 @@ class VExpress_EMM(RealView):
def attachOnChipIO(self, bus, bridge):
self.gic.pio = bus.master
self.local_cpu_timer.pio = bus.master
+ if hasattr(self, "gicv2m"):
+ self.gicv2m.pio = bus.master
self.hdlcd.dma = bus.slave
# Bridge ranges based on excluding what is part of on-chip I/O
# (gic, a9scu)
@@ -429,9 +519,17 @@ class VExpress_EMM(RealView):
self.vgic.pio = bus.master
- # Attach I/O devices to specified bus object. Can't do this
- # earlier, since the bus object itself is typically defined at the
- # System level.
+ # Set the clock domain for IO objects that are considered
+ # to be "close" to the cores.
+ def onChipIOClkDomain(self, clkdomain):
+ self.gic.clk_domain = clkdomain
+ if hasattr(self, "gicv2m"):
+ self.gicv2m.clk_domain = clkdomain
+ self.hdlcd.clk_domain = clkdomain
+ self.vgic.clk_domain = clkdomain
+
+ # Attach I/O devices to specified bus object. Done here
+ # as the specified bus to connect to may not always be fixed.
def attachIO(self, bus):
self.uart.pio = bus.master
self.realview_io.pio = bus.master
@@ -448,12 +546,6 @@ class VExpress_EMM(RealView):
self.rtc.pio = bus.master
bus.use_default_range = True
self.vram.port = bus.master
- self.ide.pio = bus.master
- self.ide.config = bus.master
- self.ide.dma = bus.slave
- self.ethernet.pio = bus.master
- self.ethernet.config = bus.master
- self.ethernet.dma = bus.slave
self.pciconfig.pio = bus.default
self.l2x0_fake.pio = bus.master
@@ -467,6 +559,43 @@ class VExpress_EMM(RealView):
self.usb_fake.pio = bus.master
self.mmc_fake.pio = bus.master
+ # Try to attach the I/O if it exists
+ try:
+ self.ide.pio = bus.master
+ self.ide.config = bus.master
+ self.ide.dma = bus.slave
+ self.ethernet.pio = bus.master
+ self.ethernet.config = bus.master
+ self.ethernet.dma = bus.slave
+ except:
+ pass
+
+ # Set the clock domain for IO objects that are considered
+ # to be "far" away from the cores.
+ def offChipIOClkDomain(self, clkdomain):
+ self.uart.clk_domain = clkdomain
+ self.realview_io.clk_domain = clkdomain
+ self.timer0.clk_domain = clkdomain
+ self.timer1.clk_domain = clkdomain
+ self.clcd.clk_domain = clkdomain
+ self.kmi0.clk_domain = clkdomain
+ self.kmi1.clk_domain = clkdomain
+ self.cf_ctrl.clk_domain = clkdomain
+ self.rtc.clk_domain = clkdomain
+ self.vram.clk_domain = clkdomain
+ self.pciconfig.clk_domain = clkdomain
+
+ self.l2x0_fake.clk_domain = clkdomain
+ self.uart1_fake.clk_domain = clkdomain
+ self.uart2_fake.clk_domain = clkdomain
+ self.uart3_fake.clk_domain = clkdomain
+ self.sp810_fake.clk_domain = clkdomain
+ self.watchdog_fake.clk_domain = clkdomain
+ self.aaci_fake.clk_domain = clkdomain
+ self.lan_fake.clk_domain = clkdomain
+ self.usb_fake.clk_domain = clkdomain
+ self.mmc_fake.clk_domain = clkdomain
+
class VExpress_EMM64(VExpress_EMM):
def setupBootLoader(self, mem_bus, cur_sys, loc):
self.nvmem = SimpleMemory(range = AddrRange(0, size = '64MB'))