summaryrefslogtreecommitdiff
path: root/src/dev/arm/pl011.cc
diff options
context:
space:
mode:
Diffstat (limited to 'src/dev/arm/pl011.cc')
-rw-r--r--src/dev/arm/pl011.cc146
1 files changed, 61 insertions, 85 deletions
diff --git a/src/dev/arm/pl011.cc b/src/dev/arm/pl011.cc
index d690ee9cb..2abd82e96 100644
--- a/src/dev/arm/pl011.cc
+++ b/src/dev/arm/pl011.cc
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2010 ARM Limited
+ * Copyright (c) 2010, 2015 ARM Limited
* All rights reserved
*
* The license below extends only to copyright in the software and shall
@@ -38,23 +38,29 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Ali Saidi
+ * Andreas Sandberg
*/
+#include "dev/arm/pl011.hh"
+
#include "base/trace.hh"
#include "debug/Checkpoint.hh"
#include "debug/Uart.hh"
#include "dev/arm/amba_device.hh"
#include "dev/arm/base_gic.hh"
-#include "dev/arm/pl011.hh"
#include "dev/terminal.hh"
#include "mem/packet.hh"
#include "mem/packet_access.hh"
#include "sim/sim_exit.hh"
-
-Pl011::Pl011(const Params *p)
- : Uart(p, 0xfff), control(0x300), fbrd(0), ibrd(0), lcrh(0), ifls(0x12),
- imsc(0), rawInt(0), maskInt(0), intNum(p->int_num), gic(p->gic),
- endOnEOT(p->end_on_eot), intDelay(p->int_delay), intEvent(this)
+#include "params/Pl011.hh"
+
+Pl011::Pl011(const Pl011Params *p)
+ : Uart(p, 0xfff),
+ intEvent(this),
+ control(0x300), fbrd(0), ibrd(0), lcrh(0), ifls(0x12),
+ imsc(0), rawInt(0),
+ gic(p->gic), endOnEOT(p->end_on_eot), intNum(p->int_num),
+ intDelay(p->int_delay)
{
}
@@ -75,17 +81,23 @@ Pl011::read(PacketPtr pkt)
switch(daddr) {
case UART_DR:
data = 0;
- if (term->dataAvailable())
+ if (term->dataAvailable()) {
data = term->in();
+ // Since we don't simulate a FIFO for incoming data, we
+ // assume it's empty and clear RXINTR and RTINTR.
+ clearInterrupts(UART_RXINTR | UART_RTINTR);
+ }
break;
case UART_FR:
- // For now we're infintely fast, so TX is never full, always empty,
- // always clear to send
- data = UART_FR_TXFE | UART_FR_CTS;
- if (!term->dataAvailable())
- data |= UART_FR_RXFE;
- DPRINTF(Uart, "Reading FR register as %#x rawInt=0x%x imsc=0x%x maskInt=0x%x\n",
- data, rawInt, imsc, maskInt);
+ data =
+ UART_FR_CTS | // Clear To Send
+ (!term->dataAvailable() ? UART_FR_RXFE : 0) | // RX FIFO Empty
+ UART_FR_TXFE; // TX FIFO empty
+
+ DPRINTF(Uart,
+ "Reading FR register as %#x rawInt=0x%x "
+ "imsc=0x%x maskInt=0x%x\n",
+ data, rawInt, imsc, maskInt());
break;
case UART_CR:
data = control;
@@ -110,8 +122,8 @@ Pl011::read(PacketPtr pkt)
DPRINTF(Uart, "Reading Raw Int status as 0x%x\n", rawInt);
break;
case UART_MIS:
- DPRINTF(Uart, "Reading Masked Int status as 0x%x\n", rawInt);
- data = maskInt;
+ DPRINTF(Uart, "Reading Masked Int status as 0x%x\n", maskInt());
+ data = maskInt();
break;
default:
if (readId(pkt, AMBA_ID, pioAddr)) {
@@ -182,15 +194,11 @@ Pl011::write(PacketPtr pkt)
exitSimLoop("UART received EOT", 0);
term->out(data & 0xFF);
-
- //raw interrupt is set regardless of imsc.txim
- rawInt.txim = 1;
- if (imsc.txim) {
- DPRINTF(Uart, "TX int enabled, scheduling interruptt\n");
- if (!intEvent.scheduled())
- schedule(intEvent, curTick() + intDelay);
- }
-
+ // We're supposed to clear TXINTR when this register is
+ // written to, however. since we're also infinitely fast, we
+ // need to immediately raise it again.
+ clearInterrupts(UART_TXINTR);
+ raiseInterrupts(UART_TXINTR);
break;
case UART_CR:
control = data;
@@ -208,35 +216,13 @@ Pl011::write(PacketPtr pkt)
ifls = data;
break;
case UART_IMSC:
- imsc = data;
-
- if (imsc.feim || imsc.peim || imsc.beim || imsc.oeim || imsc.rsvd)
- panic("Unknown interrupt enabled\n");
-
- // rimim, ctsmim, dcdmim, dsrmim can be enabled but are ignored
- // they are supposed to interrupt on a change of status in the line
- // which we should never have since our terminal is happy to always
- // receive bytes.
-
- if (imsc.txim) {
- DPRINTF(Uart, "Writing to IMSC: TX int enabled, scheduling interruptt\n");
- rawInt.txim = 1;
- if (!intEvent.scheduled())
- schedule(intEvent, curTick() + intDelay);
- }
-
+ DPRINTF(Uart, "Setting interrupt mask 0x%x\n", data);
+ setInterruptMask(data);
break;
case UART_ICR:
DPRINTF(Uart, "Clearing interrupts 0x%x\n", data);
- rawInt = rawInt & ~data;
- maskInt = rawInt & imsc;
-
- DPRINTF(Uart, " -- Masked interrupts 0x%x\n", maskInt);
-
- if (!maskInt)
- gic->clearInt(intNum);
-
+ clearInterrupts(data);
break;
default:
panic("Tried to write PL011 at offset %#x that doesn't exist\n", daddr);
@@ -251,27 +237,36 @@ Pl011::dataAvailable()
{
/*@todo ignore the fifo, just say we have data now
* We might want to fix this, or we might not care */
- rawInt.rxim = 1;
- rawInt.rtim = 1;
-
DPRINTF(Uart, "Data available, scheduling interrupt\n");
-
- if (!intEvent.scheduled())
- schedule(intEvent, curTick() + intDelay);
+ raiseInterrupts(UART_RXINTR | UART_RTINTR);
}
void
Pl011::generateInterrupt()
{
DPRINTF(Uart, "Generate Interrupt: imsc=0x%x rawInt=0x%x maskInt=0x%x\n",
- imsc, rawInt, maskInt);
- maskInt = imsc & rawInt;
+ imsc, rawInt, maskInt());
- if (maskInt.rxim || maskInt.rtim || maskInt.txim) {
+ if (maskInt()) {
gic->sendInt(intNum);
DPRINTF(Uart, " -- Generated\n");
}
+}
+
+void
+Pl011::setInterrupts(uint16_t ints, uint16_t mask)
+{
+ const bool old_ints(!!maskInt());
+
+ imsc = mask;
+ rawInt = ints;
+ if (!old_ints && maskInt()) {
+ if (!intEvent.scheduled())
+ schedule(intEvent, curTick() + intDelay);
+ } else if (old_ints && !maskInt()) {
+ gic->clearInt(intNum);
+ }
}
@@ -286,17 +281,9 @@ Pl011::serialize(std::ostream &os)
SERIALIZE_SCALAR(lcrh);
SERIALIZE_SCALAR(ifls);
- uint16_t imsc_serial = imsc;
- SERIALIZE_SCALAR(imsc_serial);
-
- uint16_t rawInt_serial = rawInt;
- SERIALIZE_SCALAR(rawInt_serial);
-
- uint16_t maskInt_serial = maskInt;
- SERIALIZE_SCALAR(maskInt_serial);
-
- SERIALIZE_SCALAR(endOnEOT);
- SERIALIZE_SCALAR(intDelay);
+ // Preserve backwards compatibility by giving these silly names.
+ paramOut(os, "imsc_serial", imsc);
+ paramOut(os, "rawInt_serial", rawInt);
}
void
@@ -310,20 +297,9 @@ Pl011::unserialize(Checkpoint *cp, const std::string &section)
UNSERIALIZE_SCALAR(lcrh);
UNSERIALIZE_SCALAR(ifls);
- uint16_t imsc_serial;
- UNSERIALIZE_SCALAR(imsc_serial);
- imsc = imsc_serial;
-
- uint16_t rawInt_serial;
- UNSERIALIZE_SCALAR(rawInt_serial);
- rawInt = rawInt_serial;
-
- uint16_t maskInt_serial;
- UNSERIALIZE_SCALAR(maskInt_serial);
- maskInt = maskInt_serial;
-
- UNSERIALIZE_SCALAR(endOnEOT);
- UNSERIALIZE_SCALAR(intDelay);
+ // Preserve backwards compatibility by giving these silly names.
+ paramIn(cp, section, "imsc_serial", imsc);
+ paramIn(cp, section, "rawInt_serial", rawInt);
}
Pl011 *
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-06 05:43:49 +0000